bors [Sun, 20 Jun 2021 20:07:13 +0000 (20:07 +0000)]
Auto merge of #85538 - r00ster91:iterrepeat, r=Mark-Simulacrum
Replace some `std::iter::repeat` with `str::repeat`
I noticed that there were some instances where `std::iter::repeat` would be used to repeat a string or a char to take a specific count of it and then collect it into a `String` when `str::repeat` is actually much faster and better for that.
See also: https://github.com/rust-lang/rust-clippy/issues/7260.
bors [Tue, 18 May 2021 20:50:01 +0000 (20:50 +0000)]
Auto merge of #84767 - scottmcm:try_trait_actual, r=lcnr
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
bors [Wed, 12 May 2021 11:05:56 +0000 (11:05 +0000)]
Auto merge of #83813 - cbeuw:remap-std, r=michaelwoerister
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes #73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
Aaron Hill [Sun, 2 Aug 2020 23:52:16 +0000 (19:52 -0400)]
Implement span quoting for proc-macros
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
bors [Wed, 5 May 2021 14:15:19 +0000 (14:15 +0000)]
Auto merge of #84200 - CDirkx:os, r=m-ou-se
Move all `sys::ext` modules to `os`
This PR moves all `sys::ext` modules to `os`, centralizing the location of all `os` code and simplifying the dependencies between `os` and `sys`.
Because this also removes all uses `cfg_if!` on publicly exported items, where after #81969 there were still a few left, this should properly work around https://github.com/rust-analyzer/rust-analyzer/issues/6038.
Auto merge of #84189 - jyn514:clippy-dev, r=Mark-Simulacrum
Implement `x.py test src/tools/clippy --bless`
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
Jack Huey [Thu, 29 Apr 2021 02:59:22 +0000 (22:59 -0400)]
Rollup merge of #84484 - jyn514:check-tools, r=Mark-Simulacrum
Don't rebuild rustdoc and clippy after checking bootstrap
This works by unconditionally passing -Z unstable-options to the
compiler. This has no affect in practice since bootstrap doesn't use
`deny(rustc::internal)`.
Joshua Nelson [Wed, 14 Apr 2021 13:20:49 +0000 (09:20 -0400)]
Implement `x.py test src/tools/clippy --bless`
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
Auto merge of #78880 - CDirkx:not_supported, r=joshtriplett
Add `Unsupported` to `std::io::ErrorKind`
I noticed a significant portion of the uses of `ErrorKind::Other` in std is for unsupported operations.
The notion that a specific operation is not available on a target (and will thus never succeed) seems semantically distinct enough from just "an unspecified error occurred", which is why I am proposing to add the variant `Unsupported` to `std::io::ErrorKind`.
**Implementation**:
The following variant will be added to `std::io::ErrorKind`:
```rust
/// This operation is unsupported on this platform.
Unsupported
```
`std::io::ErrorKind::Unsupported` is an error returned when a given operation is not supported on a platform, and will thus never succeed; there is no way for the software to recover. It will be used instead of `Other` where appropriate, e.g. on wasm for file and network operations.
`decode_error_kind` will be updated to decode operating system errors to `Unsupported`:
- Unix and VxWorks: `libc::ENOSYS`
- Windows: `c::ERROR_CALL_NOT_IMPLEMENTED`
- WASI: `wasi::ERRNO_NOSYS`
**Stability**:
This changes the kind of error returned by some functions on some platforms, which I think is not covered by the stability guarantees of the std? User code could depend on this behavior, expecting `ErrorKind::Other`, however the docs already mention:
> Errors that are `Other` now may move to a different or a new `ErrorKind` variant in the future. It is not recommended to match an error against `Other` and to expect any additional characteristics, e.g., a specific `Error::raw_os_error` return value.
The most recent variant added to `ErrorKind` was `UnexpectedEof` in `1.6.0` (almost 5 years ago), but `ErrorKind` is marked as `#[non_exhaustive]` and the docs warn about exhaustively matching on it, so adding a new variant per se should not be a breaking change.
The variant `Unsupported` itself could be marked as `#[unstable]`, however, because this PR also immediately uses this new variant and changes the errors returned by functions I'm inclined to agree with the others in this thread that the variant should be insta-stabilized.
Rollup merge of #83916 - Amanieu:asm_anonconst, r=petrochenkov
Use AnonConst for asm! constants
This replaces the old system which used explicit promotion. See #83169 for more background.
The syntax for `const` operands is still the same as before: `const <expr>`.
Fixes #83169
Because the implementation is heavily based on inline consts, we suffer from the same issues:
- We lose the ability to use expressions derived from generics. See the deleted tests in `src/test/ui/asm/const.rs`.
- We are hitting the same ICEs as inline consts, for example #78174. It is unlikely that we will be able to stabilize this before inline consts are stabilized.
The attribute could always be replaced with `-C link-arg`, but cargo didn't provide a reasonable way to pass such flags to rustc.
Now cargo supports `cargo:rustc-link-arg*` directives in build scripts (https://doc.rust-lang.org/cargo/reference/unstable.html#extra-link-arg), so this attribute can be removed.
Joshua Nelson [Tue, 16 Mar 2021 05:50:34 +0000 (01:50 -0400)]
Remove (lots of) dead code
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Dylan DPC [Sat, 27 Mar 2021 19:37:07 +0000 (20:37 +0100)]
Rollup merge of #82917 - cuviper:iter-zip, r=m-ou-se
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
When the character next to `{}` is "shifted" (when mapping a byte index
in the format string to span) we should avoid shifting the span end
index, so first map the index of `}` to span, then bump the span,
instead of first mapping the next byte index to a span (which causes
bumping the end span too much).
bors [Mon, 22 Mar 2021 19:48:27 +0000 (19:48 +0000)]
Auto merge of #79278 - mark-i-m:stabilize-or-pattern, r=nikomatsakis
Stabilize or_patterns (RFC 2535, 2530, 2175)
closes #54883
This PR stabilizes the or_patterns feature in Rust 1.53.
This is blocked on the following (in order):
- [x] The crater run in https://github.com/rust-lang/rust/pull/78935#issuecomment-731564021
- [x] The resolution of the unresolved questions and a second crater run (https://github.com/rust-lang/rust/pull/78935#issuecomment-735412705)
- It looks like we will need to pursue some sort of edition-based transition for `:pat`.
- [x] Nomination and discussion by T-lang
- [x] Implement new behavior for `:pat` based on consensus (https://github.com/rust-lang/rust/pull/80100).
- [ ] An FCP on stabilization
EDIT: Stabilization report is in https://github.com/rust-lang/rust/pull/79278#issuecomment-772815177
bors [Wed, 17 Mar 2021 19:39:03 +0000 (19:39 +0000)]
Auto merge of #82122 - bstrie:dep4real, r=dtolnay
Deprecate `intrinsics::drop_in_place` and `collections::Bound`, which accidentally weren't deprecated
Fixes #82080.
I've taken the liberty of updating the `since` values to 1.52, since an unobservable deprecation isn't much of a deprecation (even the detailed release notes never bothered to mention these deprecations).
As mentioned in the issue I'm *pretty* sure that using a type alias for `Bound` is semantically equivalent to the re-export; [the reference implies](https://doc.rust-lang.org/reference/items/type-aliases.html) that type aliases only observably differ from types when used on unit structs or tuple structs, whereas `Bound` is an enum.
bors [Wed, 17 Mar 2021 16:49:46 +0000 (16:49 +0000)]
Auto merge of #83188 - petrochenkov:field, r=lcnr
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
Yuki Okushi [Wed, 17 Mar 2021 06:20:54 +0000 (15:20 +0900)]
Rollup merge of #83092 - petrochenkov:qspan, r=estebank
More precise spans for HIR paths
`Ty::assoc_item` is lowered to `<Ty>::assoc_item` in HIR, but `Ty` got span from the whole path.
This PR fixes that, and adjusts some diagnostic code that relied on `Ty` having the whole path span.
This is a pre-requisite for https://github.com/rust-lang/rust/pull/82868 (we cannot report suggestions like `Tr::assoc` -> `<dyn Tr>::assoc` with the current imprecise spans).
r? ````@estebank````
bors [Tue, 16 Mar 2021 19:19:06 +0000 (19:19 +0000)]
Auto merge of #82536 - sexxi-goose:handle-patterns-take-2, r=nikomatsakis
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
bors [Wed, 10 Mar 2021 08:40:51 +0000 (08:40 +0000)]
Auto merge of #79519 - cjgillot:noattr, r=wesleywiser
Store HIR attributes in a side table
Same idea as #72015 but for attributes.
The objective is to reduce incr-comp invalidations due to modified attributes.
Notably, those due to modified doc comments.
Implementation:
- collect attributes during AST->HIR lowering, in `LocalDefId -> ItemLocalId -> &[Attributes]` nested tables;
- access the attributes through a `hir_owner_attrs` query;
- local refactorings to use this access;
- remove `attrs` from HIR data structures one-by-one.
Change in behaviour:
- the HIR visitor traverses all attributes at once instead of parent-by-parent;
- attribute arrays are sometimes duplicated: for statements and variant constructors;
- as a consequence, attributes are marked as used after unused-attribute lint emission to avoid duplicate lints.
~~Current bug: the lint level is not correctly applied in `std::backtrace_rs`, triggering an unused attribute warning on `#![no_std]`. I welcome suggestions.~~