bors [Sun, 30 May 2021 07:25:38 +0000 (07:25 +0000)]
Auto merge of #85786 - GuillaumeGomez:error-code-checker-improvement, r=Mark-Simulacrum
Error code checker improvement
Just realized that some error codes shouldn't be ignored anymore. So I updated the script to ensure that if an error code is tested and ignored, it will trigger an error.
bors [Sun, 30 May 2021 01:21:39 +0000 (01:21 +0000)]
Auto merge of #83772 - jhpratt:revamp-step-trait, r=Mark-Simulacrum
Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
bors [Sat, 29 May 2021 22:55:40 +0000 (22:55 +0000)]
Auto merge of #85390 - Mark-Simulacrum:fast-bridge, r=petrochenkov
Optimize proc macro bridge
This optimizes the proc macro bridge code for a win of 0.7% instruction counts on the diesel-check benchmark (non-incr, full). These wins are small, but hopefully not limited to just the diesel benchmark; the code is also not seriously impacted by the changes here.
bors [Sat, 29 May 2021 19:27:53 +0000 (19:27 +0000)]
Auto merge of #85698 - ehuss:incremental-session-panic, r=estebank
Don't panic when failing to initialize incremental directory.
This removes a panic when rustc fails to initialize the incremental directory. This can commonly happen on various filesystems that don't support locking (often various network filesystems). Panics can be confusing and scary, and there are already plenty of issues reporting this.
This has been panicking since 1.22 due to I think #44502 which was a major rework of how things work. Previously, things were simpler and the [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.21.0/src/librustc_incremental/persist/load.rs#L43-L65) function would emit an error and then continue on without panicking. With 1.22, [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.22.0/src/librustc_incremental/persist/load.rs#L44) was changed so that it assumes it can load the data without errors. Today, the problem is that it calls [`prepare_session_directory`](https://github.com/rust-lang/rust/blob/fbf1b1a7193cda17008ab590e06ad28d9924023b/compiler/rustc_interface/src/passes.rs#L175-L179) and then immediately calls `garbage_collect_session_directories` which will panic since the session is `IncrCompSession::NotInitialized`.
The solution here is to have `prepare_session_directory` return an error that must be handled so that compilation stops if it fails.
Some other options:
* Ignore directory lock failures.
* Print a warning on directory lock failure, but otherwise continue with incremental enabled.
* Print a warning on directory lock failure, and disable incremental.
* Provide a different locking mechanism.
Cargo ignores lock errors if locking is not supported, so that would be a precedent for the first option. These options would require quite a bit more changes, but I'm happy to entertain any of them, as I think they all have valid justifications.
There is more discussion on the many issues where this is reported: #49773, #59224, #66513, #76251. I'm not sure if this can be considered closing any of those, though, since I think there is some value in discussing if there is a way to avoid the error altogether. But I think it would make sense to at least close all but one to consolidate them.
bors [Sat, 29 May 2021 16:27:14 +0000 (16:27 +0000)]
Auto merge of #85540 - GuillaumeGomez:better-result-dom-generation, r=jsha
Better result dom generation
First commit is from https://github.com/rust-lang/rust/pull/85506.
We realized in https://github.com/rust-lang/rust/pull/85506#issuecomment-844984162 thanks to `@dns2utf8` that in some cases, the generated search result DOM was invalid. This was not strict enough and the DOM was inserted as a big string, which wasn't great.
bors [Sat, 29 May 2021 13:34:20 +0000 (13:34 +0000)]
Auto merge of #85767 - lqd:stackless_span_stacks, r=oli-obk
A bit more polish on const eval errors
This PR adds a bit more polish to the const eval errors:
- a slight improvement to the PME messages from #85633: I mentioned there that the erroneous item's paths were dependent on the environment, and could be displayed fully qualified or not. This can obscure the items when they come from a dependency. This PR uses the pretty-printing code ensuring the items' paths are not trimmed.
- whenever there are generics involved in an item where const evaluation errors out, the error message now displays the instance and its const arguments, so that we can see which instantiated item and compile-time values lead to the error.
So we get this slight improvement for our beloved `stdarch` example, on nightly:
```
error[E0080]: evaluation of constant value failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', /rustc/9111b8ae9793f18179a1336417618fc07a9cac85/library/core/src/../../stdarch/crates/core_arch/src/macros.rs:8:9
|
```
to this PR's:
```
error[E0080]: evaluation of `core::core_arch::macros::ValidateConstImm::<51_i32, 0_i32, 15_i32>::VALID` failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', ./stdarch/crates/core_arch/src/macros.rs:8:9
|
```
with this PR.
Of course this is an idea from Oli, so maybe r? `@oli-obk` if they have the time.
bors [Fri, 28 May 2021 15:03:52 +0000 (15:03 +0000)]
Auto merge of #85700 - Bobo1239:dso_local_ppc64, r=nagisa
Fix static relocation model for PowerPC64
We now also use `should_assume_dso_local()` for declarations and port two
additional cases from clang:
- Exclude PPC64 [1]
- Exclude thread-local variables [2]
Tbh I don't know enough about PowerPC(64) to explain why the TOC (table of contents; like the GOT in x86?) is still needed even with the static relocation model. But with these changes [Rust-For-Linux](https://github.com/Rust-for-Linux/linux) runs again on ppc64le. (instead of [getting loaded successfully but crashing](https://github.com/Bobo1239/linux/runs/2646478783?check_suite_focus=true#step:47:358))
bors [Fri, 28 May 2021 08:49:48 +0000 (08:49 +0000)]
Auto merge of #85546 - hyd-dev:unwind, r=RalfJung
const-eval: disallow unwinding across functions that `!fn_can_unwind()`
Following https://github.com/rust-lang/miri/pull/1776#discussion_r633074343, so r? `@RalfJung`
This PR turns `unwind` in `StackPopCleanup::Goto` into a new enum `StackPopUnwind`, with a `NotAllowed` variant to indicate that unwinding is not allowed. This variant is chosen based on `rustc_middle::ty::layout::fn_can_unwind()` in `eval_fn_call()` when pushing the frame. A check is added in `unwind_to_block()` to report UB if unwinding happens across a `StackPopUnwind::NotAllowed` frame.
bors [Fri, 28 May 2021 06:08:58 +0000 (06:08 +0000)]
Auto merge of #85745 - veber-alex:panic_any, r=m-ou-se
Add #[track_caller] to panic_any
Report the panic location from the user code.
```rust
use std::panic;
use std::panic::panic_any;
fn main() {
panic::set_hook(Box::new(|panic_info| {
if let Some(location) = panic_info.location() {
println!(
"panic occurred in file '{}' at line {}",
location.file(),
location.line(),
);
} else {
println!("panic occurred but can't get location information...");
}
}));
The current output is:
```
error[E0605]: non-primitive cast: `*mut (dyn T + 'static)` as `&dyn T`
--> src/main.rs:7:5
|
7 | (t as &dyn T).t();
| ^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
7 | (&t as &dyn T).t();
| ^
```
This is incorrect, though: The cast will _not_ be valid when writing `&t` instead of `t`:
```
error[E0277]: the trait bound `*mut (dyn T + 'static): T` is not satisfied
--> t4.rs:7:6
|
7 | (&t as &dyn T).t();
| ^^ the trait `T` is not implemented for `*mut (dyn T + 'static)`
|
= note: required for the cast to the object type `dyn T`
```
The correct suggestion is `&*t`, which I have implemented in this pull request. Of course, this suggestion will always require an unsafe block, but arguably, that's what the user really wants if they're trying to cast a pointer to a reference.
In any case, claiming that the cast will be valid after implementing the suggestion is overly optimistic, as the coercion logic doesn't seem to resolve all nested obligations, i.e. the cast may still be invalid after implementing the suggestion. I have therefore rephrased the suggestion slightly ("consider borrowing the value" instead of "borrow the value for the cast to be valid").
Additionally, I have fixed another incorrect suggestion not mentioned in #84598, which relates to casting immutable references to mutable ones:
```rust
fn main() {
let mut x = 0;
let m = &x as &mut i32;
}
```
currently leads to
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
3 | let m = &mut &x as &mut i32;
| ^^^^
```
which is obviously incorrect:
```
error[E0596]: cannot borrow data in a `&` reference as mutable
--> t5.rs:3:13
|
3 | let m = &mut &x as &mut i32;
| ^^^^^^^ cannot borrow as mutable
```
I've changed the suggestion to a note explaining the problem:
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
note: this reference is immutable
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^
note: trying to cast to a mutable reference type
--> t5.rs:3:19
|
3 | let m = &x as &mut i32;
| ^^^^^^^^
```
In this example, it would have been even nicer to suggest replacing `&x` with `&mut x`, but this would be much more complex because we would have to take apart the expression to be cast (currently, we only look at its type), and `&x` could be stored in a variable, where such a suggestion would not even be directly applicable:
```rust
fn main() {
let mut x = 0;
let r = &x;
let m = r as &mut i32;
}
```
My solution covers this case, too.
We now also use `should_assume_dso_local()` for declarations and port two
additional cases from clang:
- Exclude PPC64 [1]
- Exclude thread-local variables [2]
bors [Fri, 28 May 2021 00:57:39 +0000 (00:57 +0000)]
Auto merge of #85743 - bjorn3:sync_cg_clif-2021-05-27, r=bjorn3
Sync rustc_codegen_cranelift
The main highlight this sync is the removal of several dependencies, making compilation of cg_clif itself faster. There have also been a couple of new features like `#[link_section]` now supporting different segments for Mach-O binaries (thanks `@eggyal!)` and the `imported_main` feature, which is currently unstable.
Add an alternative formatter to `libtest`. Formatter produces valid xml that later can be interpreted as JUnit report.
Caveats:
- `timestamp` is required by schema, but every viewer/parser ignores it. Attribute is not set to avoid depending on chrono;
- Running all "suits" (unit tests, doc-tests and integration tests) will produce a mess;
- I couldn't find a way to get integration test binary name, so it's just goes by "integration";
Guillaume Gomez [Thu, 27 May 2021 18:08:17 +0000 (20:08 +0200)]
Rollup merge of #85722 - GuillaumeGomez:trait-toggle, r=jsha
Fix trait methods' toggle
A `<details>` tag wasn't closed on trait methods, which created broken DOM. I also used this occasion to only generate the toggle in case there is documentation on the method.
bors [Thu, 27 May 2021 13:05:57 +0000 (13:05 +0000)]
Auto merge of #85737 - scottmcm:vec-calloc-option-nonzero, r=m-ou-se
Enable Vec's calloc optimization for Option<NonZero>
Someone on discord noticed that `vec![None::<NonZeroU32>; N]` wasn't getting the optimization, so here's a PR 🙃
We can certainly do this in the standard library because we know for sure this is ok, but I think it's also a necessary consequence of documented guarantees like those in https://doc.rust-lang.org/std/option/#representation and https://doc.rust-lang.org/core/num/struct.NonZeroU32.html
It feels weird to do this without adding a test, but I wasn't sure where that would belong. Is it worth adding codegen tests for these?
bors [Thu, 27 May 2021 04:08:20 +0000 (04:08 +0000)]
Auto merge of #84124 - 12101111:libunwind, r=petrochenkov
libunwind fix and cleanup
Fix:
1. "system-llvm-libunwind" now only skip build-script for linux target
2. workaround from https://github.com/rust-lang/rust/pull/65972 is not needed, upstream fix it in https://github.com/llvm/llvm-project/commit/68c50708d1f2b9aee3f10ec710df0b1387f701e5 ( LLVM 11 )
3. remove code for MSCV and Apple in `compile()`, as they are not used
4. fix https://github.com/rust-lang/rust/issues/69222 , compile c files and cpp files in different config
5. fix conditional compilation for musl target.
6. fix that x86_64-fortanix-unknown-sgx don't link libunwind built in build-script into rlib
bors [Thu, 27 May 2021 01:43:20 +0000 (01:43 +0000)]
Auto merge of #85734 - Dylan-DPC:rollup-q6iiees, r=Dylan-DPC
Rollup of 8 pull requests
Successful merges:
- #84221 (E0599 suggestions and elision of generic argument if no canditate is found)
- #84701 (stabilize member constraints)
- #85564 ( readd capture disjoint fields gate)
- #85583 (Get rid of PreviousDepGraph.)
- #85649 (Update cc)
- #85689 (Remove Iterator #[rustc_on_unimplemented]s that no longer apply.)
- #85719 (Add inline attr to CString::into_inner so it can optimize out NonNull checks)
- #85725 (Remove unneeded workaround)
Dylan DPC [Thu, 27 May 2021 01:02:11 +0000 (03:02 +0200)]
Rollup merge of #85719 - elichai:cstring-into_inner-inline, r=m-ou-se
Add inline attr to CString::into_inner so it can optimize out NonNull checks
It seems that currently if you convert any of the standard library's container to a pointer and then to a NonNull pointer, all will optimize out the NULL check except `CString`(https://godbolt.org/z/YPKW9G5xn),
because for some reason `CString::into_inner` isn't inlined even though it's a private function that should compile into a simple `mov` instruction.
Adding a simple `#[inline]` attribute solves this, code example:
```rust
use std::ffi::CString;
use std::ptr::NonNull;
Dylan DPC [Thu, 27 May 2021 01:02:10 +0000 (03:02 +0200)]
Rollup merge of #85689 - m-ou-se:array-intoiter-3, r=estebank
Remove Iterator #[rustc_on_unimplemented]s that no longer apply.
Now that `IntoIterator` is implemented for arrays, all the `rustc_on_unimplemented` for arrays of ranges (e.g. `for _ in [1..3] {}`) no longer apply, since they are now valid Rust.
Separated these from #85670, because we should discuss a potential new (clippy?) lint for these.
Until Rust 1.52, `for _ in [1..3] {}` produced:
```
error[E0277]: `[std::ops::Range<{integer}>; 1]` is not an iterator
--> src/main.rs:2:14
|
2 | for _ in [1..3] {}
| ^^^^^^ if you meant to iterate between two values, remove the square brackets
|
= help: the trait `std::iter::Iterator` is not implemented for `[std::ops::Range<{integer}>; 1]`
= note: `[start..end]` is an array of one `Range`; you might have meant to have a `Range` without the brackets: `start..end`
= note: required by `std::iter::IntoIterator::into_iter`
```
But in Rust 1.53 and later, it compiles fine. It iterates over the array by value, for one iteration with the element `1..3`.
This is probably a mistake, which is no longer caught. Should we have a lint for it? Should Clippy have a lint for it?
Dylan DPC [Thu, 27 May 2021 01:02:08 +0000 (03:02 +0200)]
Rollup merge of #85564 - pnkfelix:issue-85435-readd-capture-disjoint-fields-gate, r=nikomatsakis
readd capture disjoint fields gate
This readds a feature gate guard that was added in PR #83521. (Basically, there were unintended consequences to the code exposed by removing the feature gate guard.)
The root bug still remains to be resolved, as discussed in issue #85561. This is just a band-aid suitable for a beta backport.
Cc issue #85435
Note that the latter issue is unfixed until we backport this (or another fix) to 1.53 beta
Member constraints are an extension to our region solver that was introduced to make async fn region solving tractable. There are used in situations like the following:
The problem here is that every region R in the hidden type must be equal to *either* `'a` *or* `'b` (or `'static`). This cannot be expressed simply via 'outlives constriants' like `R: 'a`. Therefore, we introduce a 'member constraint' `R member of ['a, 'b]`.
These constraints were introduced in [rust-lang/rust#61775]. At the time, we kept them feature gated and used them only for `impl Trait` return types that are derived from `async fn`. The intention, however, was always to support them in other contexts once we had time to gain more experience with them.
**In the time since their introduction, we have encountered no surprises or bugs due to these member constraints.** They are tested extensively as part of every async function that involves multiple unrelated lifetimes in its arguments.
## Tests
The behavior of member constraints is covered by the following tests:
* [`src/test/ui/async-await/multiple-lifetimes`](https://github.com/rust-lang/rust/tree/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes) -- tests using the async await, which are mostly already stabilized
* [`src/test/ui/impl-trait/multiple-lifetimes.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/impl-trait/multiple-lifetimes.rs)
* [`src/test/ui/impl-trait/multiple-lifetimes/ordinary-bounds-unsuited.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/impl-trait/multiple-lifetimes/ordinary-bounds-unsuited.rs)
* [`src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-fg.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-fg.rs)
* [`src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-one.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-one.rs)
These tests cover a number of scenarios:
* `-> implTrait<'a, 'b>` with unrelated lifetimes `'a` and `'b`, as described above
* `async fn` that returns an `impl Trait` like the previous case, which desugars to a kind of "nested" impl trait like `impl Future<Output = impl Trait<'a, 'b>>`
## Potential concerns
There is a potential interaction with `impl Trait` on local variables, described in [rust-lang/rust#61773]. The challenge is that if you have a program like:
fn bar() {
let x: impl Foo<'_> = &44; // let's call the region variable for `'_` `'1`
}
```
then we would wind up with `'0 member of ['1, 'static]`, where `'0` is the region variable in the hidden type (`&'0 u32`) and `'1` is the region variable in the bounds `Foo<'1>`. This is tricky because both `'0` and `'1` are being inferred -- so making them equal may have other repercussions.
That said, `impl Trait` in bindings are not stable, and the implementation is pretty far from stabilization. Moreover, the difficulty highlighted here is not due to the presence of member constraints -- it's inherent to the design of the language. In other words, stabilizing member constraints does not actually cause us to accept anything that would make this problem any harder.
So I don't see this as a blocker to stabilization of member constraints; it is potentially a blocker to stablization of `impl trait` in let bindings.
Dylan DPC [Thu, 27 May 2021 01:02:03 +0000 (03:02 +0200)]
Rollup merge of #84221 - ABouttefeux:generic-arg-elision, r=estebank
E0599 suggestions and elision of generic argument if no canditate is found
fixes #81576
changes: In error E0599 (method not found) generic argument are eluded if the method was not found anywhere. If the method was found in another inherent implementation suggest that it was found elsewhere.
Example
```rust
struct Wrapper<T>(T);
struct Wrapper2<T> {
x: T,
}
impl Wrapper2<i8> {
fn method(&self) {}
}
fn main() {
let wrapper = Wrapper(i32);
wrapper.method();
let wrapper2 = Wrapper2{x: i32};
wrapper2.method();
}
```
```
Error[E0599]: no method named `method` found for struct `Wrapper<_>` in the current scope
....
error[E0599]: no method named `method` found for struct `Wrapper2<i32>` in the current scope
...
= note: The method was found for Wrapper2<i8>.
```
I am not very happy with the ```no method named `test` found for struct `Vec<_, _>` in the current scope```. I think it might be better to show only one generic argument `Vec<_>` if there is a default one. But I haven't yet found a way to do that,
bors [Wed, 26 May 2021 23:13:15 +0000 (23:13 +0000)]
Auto merge of #85652 - ehuss:linkchecker-perf, r=Mark-Simulacrum
Optimize linkchecker and add report.
This makes three changes to the linkchecker:
* Adds a report displayed after it finishes.
* Improves the performance by caching all filesystem access. The linkchecker can take over a minute to run on some systems, and this should make it about 2-3 times faster.
* Added a few tests.
Jacob Pratt [Fri, 2 Apr 2021 05:05:43 +0000 (01:05 -0400)]
Unify feature flags as `step_trait`
While stdlib implementations of the unchecked methods require unchecked
math, there is no reason to gate it behind this for external users. The
reasoning for a separate `step_trait_ext` feature is unclear, and as
such has been merged as well.
bors [Wed, 26 May 2021 19:22:31 +0000 (19:22 +0000)]
Auto merge of #83770 - the8472:tra-extend, r=Mark-Simulacrum
Add `TrustedRandomAccess` specialization for `Vec::extend()`
This should do roughly the same as the `TrustedLen` specialization but result in less IR by using `__iterator_get_unchecked`
instead of `Iterator::for_each`
Conflicting specializations are manually prioritized by grouping them under yet another helper trait.
Dylan DPC [Wed, 26 May 2021 11:32:11 +0000 (13:32 +0200)]
Rollup merge of #85679 - hch12907:master, r=Mark-Simulacrum
Remove num_as_ne_bytes feature
From the discussion in #76976, it is determined that eventual results of the safe transmute work as a more general mechanism will let these conversions happen in safe code without needing specialized methods.
Merging this PR closes #76976 and resolves #64464. Several T-libs members have raised their opinion that it doesn't pull its weight as a standalone method, and so we should not track it as a specific thing to add.
Dylan DPC [Wed, 26 May 2021 11:32:10 +0000 (13:32 +0200)]
Rollup merge of #85678 - lukas-code:matches2021, r=dtolnay
fix `matches!` and `assert_matches!` on edition 2021
Previously this code failed to compile on edition 2021. [(Playground)](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2021&gist=53960f2f051f641777b9e458da747707)
```rust
fn main() {
matches!((), ());
}
```
```
Compiling playground v0.0.1 (/playground)
error: `$pattern:pat` may be followed by `|`, which is not allowed for `pat` fragments
|
= note: allowed there are: `=>`, `,`, `=`, `if` or `in`
error: aborting due to previous error
error: could not compile `playground`
To learn more, run the command again with --verbose.
```
Dylan DPC [Wed, 26 May 2021 11:32:08 +0000 (13:32 +0200)]
Rollup merge of #85633 - lqd:stackless_span_stacks, r=oli-obk
Post-monomorphization errors traces MVP
This PR works towards better diagnostics for the errors encountered in #85155 and similar.
We can encounter post-monomorphization errors (PMEs) when collecting mono items. The current diagnostics are confusing for these cases when they happen in a dependency (but are acceptable when they happen in the local crate).
These kinds of errors will be more likely now that `stdarch` uses const generics for its intrinsics' immediate arguments, and validates these const arguments with a mechanism that triggers such PMEs.
(Not to mention that the errors happen during codegen, so only when building code that actually uses these code paths. Check builds don't trigger them, neither does unused code)
So in this PR, we detect these kinds of errors during the mono item graph walk: if any error happens while collecting a node or its neighbors, we print a diagnostic about the current collection step, so that the user has at least some context of which erroneous code and dependency triggered the error.
The diagnostics for issue #85155 now have this note showing the source of the erroneous const argument:
```
note: the above error was encountered while instantiating `fn std::arch::x86_64::_mm_blend_ps::<51_i32>`
--> issue-85155.rs:11:24
|
11 | let _blended = _mm_blend_ps(a, b, 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
```
Note that #85155 is a reduced version of a case happening in the wild, to indirect users of the `rustfft` crate, as seen in https://github.com/ejmahler/RustFFT/issues/74. The crate had a few of these out-of-range immediates. Here's how the diagnostics in this PR would have looked on one of its examples before it was fixed:
<details>
```
error[E0080]: evaluation of constant value failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', ./stdarch/crates/core_arch/src/macros.rs:8:9
|
= note: this error originates in the macro `$crate::panic::panic_2015` (in Nightly builds, run with -Z macro-backtrace for more info)
note: the above error was encountered while instantiating `fn _mm_blend_ps::<51_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1314:23
|
1314 | let blended = _mm_blend_ps(rows[0], rows[2], 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<5_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1859:9
|
1859 | _mm_permute_pd(self, 0x05)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<15_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1863:32
|
1863 | (_mm_movedup_pd(self), _mm_permute_pd(self, 0x0F))
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0080`.
error: could not compile `rustfft`
To learn more, run the command again with --verbose.
```
</details>
I've developed and discussed this with them, so maybe r? `@oli-obk` -- but feel free to redirect to someone else of course.
(I'm not sure we can say that this PR definitely closes issue 85155, as it's still unclear exactly which diagnostics and information would be interesting to report in such cases -- and we've discussed printing backtraces before. I have prototypes of some complete and therefore noisy backtraces I showed Oli, but we decided to not include them in this PR for now)
Dylan DPC [Wed, 26 May 2021 11:32:05 +0000 (13:32 +0200)]
Rollup merge of #85478 - FabianWolff:issue-85348, r=petrochenkov
Disallow shadowing const parameters
This pull request fixes #85348. Trying to shadow a `const` parameter as follows:
```rust
fn foo<const N: i32>() {
let N @ _ = 0;
}
```
currently causes an ICE. With my changes, I get:
```
error[E0530]: let bindings cannot shadow const parameters
--> test.rs:2:9
|
1 | fn foo<const N: i32>() {
| - the const parameter `N` is defined here
2 | let N @ _ = 0;
| ^ cannot be named the same as a const parameter
error: aborting due to previous error
```
This is the same error you get when trying to shadow a constant:
```rust
const N: i32 = 0;
let N @ _ = 0;
```
```
error[E0530]: let bindings cannot shadow constants
--> src/lib.rs:3:5
|
2 | const N: i32 = 0;
| ----------------- the constant `N` is defined here
3 | let N @ _ = 0;
| ^ cannot be named the same as a constant
error: aborting due to previous error
```
The reason for disallowing shadowing in both cases is described [here](https://github.com/rust-lang/rust/issues/33118#issuecomment-233962221) (the comment there only talks about constants, but the same reasoning applies to `const` parameters).