bors [Fri, 28 May 2021 15:03:52 +0000 (15:03 +0000)]
Auto merge of #85700 - Bobo1239:dso_local_ppc64, r=nagisa
Fix static relocation model for PowerPC64
We now also use `should_assume_dso_local()` for declarations and port two
additional cases from clang:
- Exclude PPC64 [1]
- Exclude thread-local variables [2]
Tbh I don't know enough about PowerPC(64) to explain why the TOC (table of contents; like the GOT in x86?) is still needed even with the static relocation model. But with these changes [Rust-For-Linux](https://github.com/Rust-for-Linux/linux) runs again on ppc64le. (instead of [getting loaded successfully but crashing](https://github.com/Bobo1239/linux/runs/2646478783?check_suite_focus=true#step:47:358))
bors [Fri, 28 May 2021 08:49:48 +0000 (08:49 +0000)]
Auto merge of #85546 - hyd-dev:unwind, r=RalfJung
const-eval: disallow unwinding across functions that `!fn_can_unwind()`
Following https://github.com/rust-lang/miri/pull/1776#discussion_r633074343, so r? `@RalfJung`
This PR turns `unwind` in `StackPopCleanup::Goto` into a new enum `StackPopUnwind`, with a `NotAllowed` variant to indicate that unwinding is not allowed. This variant is chosen based on `rustc_middle::ty::layout::fn_can_unwind()` in `eval_fn_call()` when pushing the frame. A check is added in `unwind_to_block()` to report UB if unwinding happens across a `StackPopUnwind::NotAllowed` frame.
bors [Fri, 28 May 2021 06:08:58 +0000 (06:08 +0000)]
Auto merge of #85745 - veber-alex:panic_any, r=m-ou-se
Add #[track_caller] to panic_any
Report the panic location from the user code.
```rust
use std::panic;
use std::panic::panic_any;
fn main() {
panic::set_hook(Box::new(|panic_info| {
if let Some(location) = panic_info.location() {
println!(
"panic occurred in file '{}' at line {}",
location.file(),
location.line(),
);
} else {
println!("panic occurred but can't get location information...");
}
}));
The current output is:
```
error[E0605]: non-primitive cast: `*mut (dyn T + 'static)` as `&dyn T`
--> src/main.rs:7:5
|
7 | (t as &dyn T).t();
| ^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
7 | (&t as &dyn T).t();
| ^
```
This is incorrect, though: The cast will _not_ be valid when writing `&t` instead of `t`:
```
error[E0277]: the trait bound `*mut (dyn T + 'static): T` is not satisfied
--> t4.rs:7:6
|
7 | (&t as &dyn T).t();
| ^^ the trait `T` is not implemented for `*mut (dyn T + 'static)`
|
= note: required for the cast to the object type `dyn T`
```
The correct suggestion is `&*t`, which I have implemented in this pull request. Of course, this suggestion will always require an unsafe block, but arguably, that's what the user really wants if they're trying to cast a pointer to a reference.
In any case, claiming that the cast will be valid after implementing the suggestion is overly optimistic, as the coercion logic doesn't seem to resolve all nested obligations, i.e. the cast may still be invalid after implementing the suggestion. I have therefore rephrased the suggestion slightly ("consider borrowing the value" instead of "borrow the value for the cast to be valid").
Additionally, I have fixed another incorrect suggestion not mentioned in #84598, which relates to casting immutable references to mutable ones:
```rust
fn main() {
let mut x = 0;
let m = &x as &mut i32;
}
```
currently leads to
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
help: borrow the value for the cast to be valid
|
3 | let m = &mut &x as &mut i32;
| ^^^^
```
which is obviously incorrect:
```
error[E0596]: cannot borrow data in a `&` reference as mutable
--> t5.rs:3:13
|
3 | let m = &mut &x as &mut i32;
| ^^^^^^^ cannot borrow as mutable
```
I've changed the suggestion to a note explaining the problem:
```
error[E0605]: non-primitive cast: `&i32` as `&mut i32`
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^^^^^^^^^^^^^ invalid cast
|
note: this reference is immutable
--> t5.rs:3:13
|
3 | let m = &x as &mut i32;
| ^^
note: trying to cast to a mutable reference type
--> t5.rs:3:19
|
3 | let m = &x as &mut i32;
| ^^^^^^^^
```
In this example, it would have been even nicer to suggest replacing `&x` with `&mut x`, but this would be much more complex because we would have to take apart the expression to be cast (currently, we only look at its type), and `&x` could be stored in a variable, where such a suggestion would not even be directly applicable:
```rust
fn main() {
let mut x = 0;
let r = &x;
let m = r as &mut i32;
}
```
My solution covers this case, too.
We now also use `should_assume_dso_local()` for declarations and port two
additional cases from clang:
- Exclude PPC64 [1]
- Exclude thread-local variables [2]
bors [Fri, 28 May 2021 00:57:39 +0000 (00:57 +0000)]
Auto merge of #85743 - bjorn3:sync_cg_clif-2021-05-27, r=bjorn3
Sync rustc_codegen_cranelift
The main highlight this sync is the removal of several dependencies, making compilation of cg_clif itself faster. There have also been a couple of new features like `#[link_section]` now supporting different segments for Mach-O binaries (thanks `@eggyal!)` and the `imported_main` feature, which is currently unstable.
Add an alternative formatter to `libtest`. Formatter produces valid xml that later can be interpreted as JUnit report.
Caveats:
- `timestamp` is required by schema, but every viewer/parser ignores it. Attribute is not set to avoid depending on chrono;
- Running all "suits" (unit tests, doc-tests and integration tests) will produce a mess;
- I couldn't find a way to get integration test binary name, so it's just goes by "integration";
Guillaume Gomez [Thu, 27 May 2021 18:08:17 +0000 (20:08 +0200)]
Rollup merge of #85722 - GuillaumeGomez:trait-toggle, r=jsha
Fix trait methods' toggle
A `<details>` tag wasn't closed on trait methods, which created broken DOM. I also used this occasion to only generate the toggle in case there is documentation on the method.
bors [Thu, 27 May 2021 13:05:57 +0000 (13:05 +0000)]
Auto merge of #85737 - scottmcm:vec-calloc-option-nonzero, r=m-ou-se
Enable Vec's calloc optimization for Option<NonZero>
Someone on discord noticed that `vec![None::<NonZeroU32>; N]` wasn't getting the optimization, so here's a PR 🙃
We can certainly do this in the standard library because we know for sure this is ok, but I think it's also a necessary consequence of documented guarantees like those in https://doc.rust-lang.org/std/option/#representation and https://doc.rust-lang.org/core/num/struct.NonZeroU32.html
It feels weird to do this without adding a test, but I wasn't sure where that would belong. Is it worth adding codegen tests for these?
bors [Thu, 27 May 2021 04:08:20 +0000 (04:08 +0000)]
Auto merge of #84124 - 12101111:libunwind, r=petrochenkov
libunwind fix and cleanup
Fix:
1. "system-llvm-libunwind" now only skip build-script for linux target
2. workaround from https://github.com/rust-lang/rust/pull/65972 is not needed, upstream fix it in https://github.com/llvm/llvm-project/commit/68c50708d1f2b9aee3f10ec710df0b1387f701e5 ( LLVM 11 )
3. remove code for MSCV and Apple in `compile()`, as they are not used
4. fix https://github.com/rust-lang/rust/issues/69222 , compile c files and cpp files in different config
5. fix conditional compilation for musl target.
6. fix that x86_64-fortanix-unknown-sgx don't link libunwind built in build-script into rlib
bors [Thu, 27 May 2021 01:43:20 +0000 (01:43 +0000)]
Auto merge of #85734 - Dylan-DPC:rollup-q6iiees, r=Dylan-DPC
Rollup of 8 pull requests
Successful merges:
- #84221 (E0599 suggestions and elision of generic argument if no canditate is found)
- #84701 (stabilize member constraints)
- #85564 ( readd capture disjoint fields gate)
- #85583 (Get rid of PreviousDepGraph.)
- #85649 (Update cc)
- #85689 (Remove Iterator #[rustc_on_unimplemented]s that no longer apply.)
- #85719 (Add inline attr to CString::into_inner so it can optimize out NonNull checks)
- #85725 (Remove unneeded workaround)
Dylan DPC [Thu, 27 May 2021 01:02:11 +0000 (03:02 +0200)]
Rollup merge of #85719 - elichai:cstring-into_inner-inline, r=m-ou-se
Add inline attr to CString::into_inner so it can optimize out NonNull checks
It seems that currently if you convert any of the standard library's container to a pointer and then to a NonNull pointer, all will optimize out the NULL check except `CString`(https://godbolt.org/z/YPKW9G5xn),
because for some reason `CString::into_inner` isn't inlined even though it's a private function that should compile into a simple `mov` instruction.
Adding a simple `#[inline]` attribute solves this, code example:
```rust
use std::ffi::CString;
use std::ptr::NonNull;
Dylan DPC [Thu, 27 May 2021 01:02:10 +0000 (03:02 +0200)]
Rollup merge of #85689 - m-ou-se:array-intoiter-3, r=estebank
Remove Iterator #[rustc_on_unimplemented]s that no longer apply.
Now that `IntoIterator` is implemented for arrays, all the `rustc_on_unimplemented` for arrays of ranges (e.g. `for _ in [1..3] {}`) no longer apply, since they are now valid Rust.
Separated these from #85670, because we should discuss a potential new (clippy?) lint for these.
Until Rust 1.52, `for _ in [1..3] {}` produced:
```
error[E0277]: `[std::ops::Range<{integer}>; 1]` is not an iterator
--> src/main.rs:2:14
|
2 | for _ in [1..3] {}
| ^^^^^^ if you meant to iterate between two values, remove the square brackets
|
= help: the trait `std::iter::Iterator` is not implemented for `[std::ops::Range<{integer}>; 1]`
= note: `[start..end]` is an array of one `Range`; you might have meant to have a `Range` without the brackets: `start..end`
= note: required by `std::iter::IntoIterator::into_iter`
```
But in Rust 1.53 and later, it compiles fine. It iterates over the array by value, for one iteration with the element `1..3`.
This is probably a mistake, which is no longer caught. Should we have a lint for it? Should Clippy have a lint for it?
Dylan DPC [Thu, 27 May 2021 01:02:08 +0000 (03:02 +0200)]
Rollup merge of #85564 - pnkfelix:issue-85435-readd-capture-disjoint-fields-gate, r=nikomatsakis
readd capture disjoint fields gate
This readds a feature gate guard that was added in PR #83521. (Basically, there were unintended consequences to the code exposed by removing the feature gate guard.)
The root bug still remains to be resolved, as discussed in issue #85561. This is just a band-aid suitable for a beta backport.
Cc issue #85435
Note that the latter issue is unfixed until we backport this (or another fix) to 1.53 beta
Member constraints are an extension to our region solver that was introduced to make async fn region solving tractable. There are used in situations like the following:
The problem here is that every region R in the hidden type must be equal to *either* `'a` *or* `'b` (or `'static`). This cannot be expressed simply via 'outlives constriants' like `R: 'a`. Therefore, we introduce a 'member constraint' `R member of ['a, 'b]`.
These constraints were introduced in [rust-lang/rust#61775]. At the time, we kept them feature gated and used them only for `impl Trait` return types that are derived from `async fn`. The intention, however, was always to support them in other contexts once we had time to gain more experience with them.
**In the time since their introduction, we have encountered no surprises or bugs due to these member constraints.** They are tested extensively as part of every async function that involves multiple unrelated lifetimes in its arguments.
## Tests
The behavior of member constraints is covered by the following tests:
* [`src/test/ui/async-await/multiple-lifetimes`](https://github.com/rust-lang/rust/tree/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes) -- tests using the async await, which are mostly already stabilized
* [`src/test/ui/impl-trait/multiple-lifetimes.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/impl-trait/multiple-lifetimes.rs)
* [`src/test/ui/impl-trait/multiple-lifetimes/ordinary-bounds-unsuited.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/impl-trait/multiple-lifetimes/ordinary-bounds-unsuited.rs)
* [`src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-fg.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-fg.rs)
* [`src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-one.rs`](https://github.com/rust-lang/rust/blob/20e032e65007ff1376e8480c1fbdb0a5068028fa/src/test/ui/async-await/multiple-lifetimes/ret-impl-trait-one.rs)
These tests cover a number of scenarios:
* `-> implTrait<'a, 'b>` with unrelated lifetimes `'a` and `'b`, as described above
* `async fn` that returns an `impl Trait` like the previous case, which desugars to a kind of "nested" impl trait like `impl Future<Output = impl Trait<'a, 'b>>`
## Potential concerns
There is a potential interaction with `impl Trait` on local variables, described in [rust-lang/rust#61773]. The challenge is that if you have a program like:
fn bar() {
let x: impl Foo<'_> = &44; // let's call the region variable for `'_` `'1`
}
```
then we would wind up with `'0 member of ['1, 'static]`, where `'0` is the region variable in the hidden type (`&'0 u32`) and `'1` is the region variable in the bounds `Foo<'1>`. This is tricky because both `'0` and `'1` are being inferred -- so making them equal may have other repercussions.
That said, `impl Trait` in bindings are not stable, and the implementation is pretty far from stabilization. Moreover, the difficulty highlighted here is not due to the presence of member constraints -- it's inherent to the design of the language. In other words, stabilizing member constraints does not actually cause us to accept anything that would make this problem any harder.
So I don't see this as a blocker to stabilization of member constraints; it is potentially a blocker to stablization of `impl trait` in let bindings.
Dylan DPC [Thu, 27 May 2021 01:02:03 +0000 (03:02 +0200)]
Rollup merge of #84221 - ABouttefeux:generic-arg-elision, r=estebank
E0599 suggestions and elision of generic argument if no canditate is found
fixes #81576
changes: In error E0599 (method not found) generic argument are eluded if the method was not found anywhere. If the method was found in another inherent implementation suggest that it was found elsewhere.
Example
```rust
struct Wrapper<T>(T);
struct Wrapper2<T> {
x: T,
}
impl Wrapper2<i8> {
fn method(&self) {}
}
fn main() {
let wrapper = Wrapper(i32);
wrapper.method();
let wrapper2 = Wrapper2{x: i32};
wrapper2.method();
}
```
```
Error[E0599]: no method named `method` found for struct `Wrapper<_>` in the current scope
....
error[E0599]: no method named `method` found for struct `Wrapper2<i32>` in the current scope
...
= note: The method was found for Wrapper2<i8>.
```
I am not very happy with the ```no method named `test` found for struct `Vec<_, _>` in the current scope```. I think it might be better to show only one generic argument `Vec<_>` if there is a default one. But I haven't yet found a way to do that,
bors [Wed, 26 May 2021 23:13:15 +0000 (23:13 +0000)]
Auto merge of #85652 - ehuss:linkchecker-perf, r=Mark-Simulacrum
Optimize linkchecker and add report.
This makes three changes to the linkchecker:
* Adds a report displayed after it finishes.
* Improves the performance by caching all filesystem access. The linkchecker can take over a minute to run on some systems, and this should make it about 2-3 times faster.
* Added a few tests.
bors [Wed, 26 May 2021 19:22:31 +0000 (19:22 +0000)]
Auto merge of #83770 - the8472:tra-extend, r=Mark-Simulacrum
Add `TrustedRandomAccess` specialization for `Vec::extend()`
This should do roughly the same as the `TrustedLen` specialization but result in less IR by using `__iterator_get_unchecked`
instead of `Iterator::for_each`
Conflicting specializations are manually prioritized by grouping them under yet another helper trait.
Dylan DPC [Wed, 26 May 2021 11:32:11 +0000 (13:32 +0200)]
Rollup merge of #85679 - hch12907:master, r=Mark-Simulacrum
Remove num_as_ne_bytes feature
From the discussion in #76976, it is determined that eventual results of the safe transmute work as a more general mechanism will let these conversions happen in safe code without needing specialized methods.
Merging this PR closes #76976 and resolves #64464. Several T-libs members have raised their opinion that it doesn't pull its weight as a standalone method, and so we should not track it as a specific thing to add.
Dylan DPC [Wed, 26 May 2021 11:32:10 +0000 (13:32 +0200)]
Rollup merge of #85678 - lukas-code:matches2021, r=dtolnay
fix `matches!` and `assert_matches!` on edition 2021
Previously this code failed to compile on edition 2021. [(Playground)](https://play.rust-lang.org/?version=nightly&mode=debug&edition=2021&gist=53960f2f051f641777b9e458da747707)
```rust
fn main() {
matches!((), ());
}
```
```
Compiling playground v0.0.1 (/playground)
error: `$pattern:pat` may be followed by `|`, which is not allowed for `pat` fragments
|
= note: allowed there are: `=>`, `,`, `=`, `if` or `in`
error: aborting due to previous error
error: could not compile `playground`
To learn more, run the command again with --verbose.
```
Dylan DPC [Wed, 26 May 2021 11:32:08 +0000 (13:32 +0200)]
Rollup merge of #85633 - lqd:stackless_span_stacks, r=oli-obk
Post-monomorphization errors traces MVP
This PR works towards better diagnostics for the errors encountered in #85155 and similar.
We can encounter post-monomorphization errors (PMEs) when collecting mono items. The current diagnostics are confusing for these cases when they happen in a dependency (but are acceptable when they happen in the local crate).
These kinds of errors will be more likely now that `stdarch` uses const generics for its intrinsics' immediate arguments, and validates these const arguments with a mechanism that triggers such PMEs.
(Not to mention that the errors happen during codegen, so only when building code that actually uses these code paths. Check builds don't trigger them, neither does unused code)
So in this PR, we detect these kinds of errors during the mono item graph walk: if any error happens while collecting a node or its neighbors, we print a diagnostic about the current collection step, so that the user has at least some context of which erroneous code and dependency triggered the error.
The diagnostics for issue #85155 now have this note showing the source of the erroneous const argument:
```
note: the above error was encountered while instantiating `fn std::arch::x86_64::_mm_blend_ps::<51_i32>`
--> issue-85155.rs:11:24
|
11 | let _blended = _mm_blend_ps(a, b, 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
```
Note that #85155 is a reduced version of a case happening in the wild, to indirect users of the `rustfft` crate, as seen in https://github.com/ejmahler/RustFFT/issues/74. The crate had a few of these out-of-range immediates. Here's how the diagnostics in this PR would have looked on one of its examples before it was fixed:
<details>
```
error[E0080]: evaluation of constant value failed
--> ./stdarch/crates/core_arch/src/macros.rs:8:9
|
8 | assert!(IMM >= MIN && IMM <= MAX, "IMM value not in expected range");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'IMM value not in expected range', ./stdarch/crates/core_arch/src/macros.rs:8:9
|
= note: this error originates in the macro `$crate::panic::panic_2015` (in Nightly builds, run with -Z macro-backtrace for more info)
note: the above error was encountered while instantiating `fn _mm_blend_ps::<51_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1314:23
|
1314 | let blended = _mm_blend_ps(rows[0], rows[2], 0x33);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<5_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1859:9
|
1859 | _mm_permute_pd(self, 0x05)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
note: the above error was encountered while instantiating `fn _mm_permute_pd::<15_i32>`
--> /tmp/RustFFT/src/avx/avx_vector.rs:1863:32
|
1863 | (_mm_movedup_pd(self), _mm_permute_pd(self, 0x0F))
| ^^^^^^^^^^^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0080`.
error: could not compile `rustfft`
To learn more, run the command again with --verbose.
```
</details>
I've developed and discussed this with them, so maybe r? `@oli-obk` -- but feel free to redirect to someone else of course.
(I'm not sure we can say that this PR definitely closes issue 85155, as it's still unclear exactly which diagnostics and information would be interesting to report in such cases -- and we've discussed printing backtraces before. I have prototypes of some complete and therefore noisy backtraces I showed Oli, but we decided to not include them in this PR for now)
Dylan DPC [Wed, 26 May 2021 11:32:05 +0000 (13:32 +0200)]
Rollup merge of #85478 - FabianWolff:issue-85348, r=petrochenkov
Disallow shadowing const parameters
This pull request fixes #85348. Trying to shadow a `const` parameter as follows:
```rust
fn foo<const N: i32>() {
let N @ _ = 0;
}
```
currently causes an ICE. With my changes, I get:
```
error[E0530]: let bindings cannot shadow const parameters
--> test.rs:2:9
|
1 | fn foo<const N: i32>() {
| - the const parameter `N` is defined here
2 | let N @ _ = 0;
| ^ cannot be named the same as a const parameter
error: aborting due to previous error
```
This is the same error you get when trying to shadow a constant:
```rust
const N: i32 = 0;
let N @ _ = 0;
```
```
error[E0530]: let bindings cannot shadow constants
--> src/lib.rs:3:5
|
2 | const N: i32 = 0;
| ----------------- the constant `N` is defined here
3 | let N @ _ = 0;
| ^ cannot be named the same as a constant
error: aborting due to previous error
```
The reason for disallowing shadowing in both cases is described [here](https://github.com/rust-lang/rust/issues/33118#issuecomment-233962221) (the comment there only talks about constants, but the same reasoning applies to `const` parameters).
Yuki Okushi [Wed, 26 May 2021 04:31:09 +0000 (13:31 +0900)]
Rollup merge of #85701 - ehuss:update-cargo, r=ehuss
Update cargo
7 commits in 070e459c2d8b79c5b2ac5218064e7603329c92ae..e931e4796b61de593aa1097649445e535c9c7ee0
2021-05-11 18:12:23 +0000 to 2021-05-24 16:17:27 +0000
- Add `cargo:rustc-link-arg-bin` flag. (rust-lang/cargo#9486)
- Add a cargo-doc.browser config option (rust-lang/cargo#9473)
- Fix bug when with resolver = "1" non-virtual package was allowing unknown features (rust-lang/cargo#9437)
- Add GitHub link to contributor guide. (rust-lang/cargo#9493)
- Add temporary fix for rustup on windows in CI. (rust-lang/cargo#9498)
- 3 typos and some capitalization (rust-lang/cargo#9495)
- fix 6 typos (rust-lang/cargo#9484)
Yuki Okushi [Wed, 26 May 2021 04:31:07 +0000 (13:31 +0900)]
Rollup merge of #85672 - CDirkx:ip, r=Mark-Simulacrum
Move stability attribute for items under the `ip` feature
The `#[unstable]` attribute for items under the `ip` feature is currently located on the `std::net::ip` module itself. This is unusual, and less readable. This has sidetracked discussion about these items numerous times (https://github.com/rust-lang/rust/pull/60145#issuecomment-498016572, https://github.com/rust-lang/rust/pull/76098#discussion_r530463543, https://github.com/rust-lang/rust/pull/76098#discussion_r558067755, https://github.com/rust-lang/rust/pull/75019#discussion_r467464300, https://github.com/rust-lang/rust/pull/75019#issuecomment-672888727) and lead to incorrect assumptions about which items are actually stable (https://github.com/rust-lang/rust/pull/60145#issuecomment-485970669, https://github.com/rust-lang/rust/pull/76098#discussion_r530444275).
This PR moves the attribute from the module to the items themselves.
Yuki Okushi [Wed, 26 May 2021 04:31:05 +0000 (13:31 +0900)]
Rollup merge of #85668 - ehuss:fix-rustdoc-tasklist, r=Mark-Simulacrum
Fix tasklist example in rustdoc book.
There were a few issues with the tasklist example in the rustdoc book:
* Misspelled "incomplete"
* Checkmarks were backwards
* Didn't show the text for each item
* Used HTML which renders differently from how markdown renders it (which uses "disabled" marks)
* Didn't use blockquotes to offset the example like the other extensions do
* Missing a colon
Yuki Okushi [Wed, 26 May 2021 04:31:02 +0000 (13:31 +0900)]
Rollup merge of #85645 - scottmcm:demote-from-into-try, r=yaahc
Demote `ControlFlow::{from|into}_try` to `pub(crate)`
They have mediocre names and non-obvious semantics, so personally I don't think they're worth trying to stabilize, and thus might as well just be internal (they're used for convenience in iterator adapters), not something shown in the rustdocs.
I don't think anyone actually wanted to use them outside `core` -- they just got made public-but-unstable along with the whole type in https://github.com/rust-lang/rust/pull/76204 that promoted `LoopState` from an internal type to the exposed `ControlFlow` type.
cc https://github.com/rust-lang/rust/issues/75744, the tracking issue they mention.
cc https://github.com/rust-lang/rust/pull/85608, the PR where I'm proposing stabilizing the type.
Yuki Okushi [Wed, 26 May 2021 04:31:00 +0000 (13:31 +0900)]
Rollup merge of #85610 - SkiFire13:fix-copy-within-provenance, r=oli-obk
Fix pointer provenance in <[T]>::copy_within
Previously the `self.as_mut_ptr()` invalidated the pointer created by the first `self.as_ptr()`. This also triggered miri when run with `-Zmiri-track-raw-pointers`
Yuki Okushi [Wed, 26 May 2021 04:30:59 +0000 (13:30 +0900)]
Rollup merge of #85590 - jam1garner:tool-bootstrap-su-fix, r=Mark-Simulacrum
Fix bootstrap using host exe suffix for cargo
When attempting to cross compile rustc (for example, from Linux to Windows) and tell it to build cargo/tools, the following error occurs:
```
thread 'main' panicked at 'src.symlink_metadata() failed with No such file or directory (os error 2)', src/bootstrap/lib.rs:1196:24
```
Relevant part of stack trace:
<details>
```
2: bootstrap::Build::copy
at ./src/bootstrap/lib.rs:1196:24
3: <bootstrap::tool::ToolBuild as bootstrap::builder::Step>::run
at ./src/bootstrap/tool.rs:220:13
```
</details>
If I add `-vvv` (which seemed to be the recommended course for debugging a similar issue according to [zulip logs](https://zulip-archive.rust-lang.org/182449tcompilerhelp/19655failedtobootstrap.html)), it shows:
```
Copy ".../rust/build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-pc-windows-gnu/release/cargo" to ".../rust/build/x86_64-unknown-linux-gnu/stage2-tools-bin/cargo"
```
and when taking a look at the contents of `build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-pc-windows-gnu/release` it contains `cargo.exe`, but no `cargo`.
I tried to study the surrounding code to make sure this was the intended behavior and while I can't be 100% certain, it does seem that using the exe suffix for the `compiler.host` target instead of the `target` target won't have the desired behavior when cross-compiling to/from Windows.
Yuki Okushi [Wed, 26 May 2021 04:30:58 +0000 (13:30 +0900)]
Rollup merge of #85529 - tlyu:trylock-errors, r=JohnTitor
doc: clarify Mutex::try_lock, etc. errors
Clarify error returns from Mutex::try_lock, RwLock::try_read,
RwLock::try_write to make it more obvious that both poisoning
and the lock being already locked are possible errors.
Yuki Okushi [Wed, 26 May 2021 04:30:54 +0000 (13:30 +0900)]
Rollup merge of #84048 - konan8205:master, r=jsha
Avoid CJK legacy fonts in Windows
As metioned in #84035, the default serif CJK font in Windows is meh-looking.
To avoid this, we should use sans-serif font or provide CJK glyph supported font in `rustdoc.css`.
bors [Wed, 26 May 2021 04:27:23 +0000 (04:27 +0000)]
Auto merge of #85252 - kulikjak:fix-solaris-CI, r=Mark-Simulacrum
Bring back `x86_64-sun-solaris` target to rustup
Change #82216 removed now deprecated target `x86_64-sun-solaris` from CI, thus making it no longer possible to use `$ rustup target add x86_64-sun-solaris` to install given target (see #85098 for details). Since there should be a period of time between the deprecation and removal, this PR brings it back (while keeping the new one as well).
Please, correct me if I am wrong; my assumption that these Docker scripts are being used to build artifacts later used by `rustup` might be incorrect.
bors [Wed, 26 May 2021 01:17:02 +0000 (01:17 +0000)]
Auto merge of #85535 - dtolnay:weakdangle, r=kennytm
Weak's type parameter may dangle on drop
Way back in https://github.com/rust-lang/rust/commit/34076bc0c9fb9ee718e1cebc407547eef730a080, #\[may_dangle\] was added to Rc\<T\> and Arc\<T\>'s Drop impls. That appears to have been because a test added in #28929 used Arc and Rc with dangling references at drop time. However, Weak was not covered by that test, and therefore no #\[may_dangle\] was forced to be added at the time.
As far as dropping, Weak has *even less need* to interact with the T than Rc and Arc do. Roughly speaking #\[may_dangle\] describes generic parameters that the outer type's Drop impl does not interact with except by possibly dropping them; no other interaction (such as trait method calls on the generic type) is permissible. It's clear this applies to Rc's and Arc's drop impl, which sometimes drop T but otherwise do not interact with one. It applies *even more* to Weak. Dropping a Weak cannot ever cause T's drop impl to run. Either there are strong references still in existence, in which case better not drop the T. Or there are no strong references still in existence, in which case the T would already have been dropped previously by the drop of the last strong count.
Rémy Rakic [Mon, 24 May 2021 14:16:56 +0000 (16:16 +0200)]
add test for issue 85155 and similar
This test reproduces post-monomorphization errors one can encounter
when using incorrect immediate arguments to some of the stdarch
intrinsics using const generics.
Rémy Rakic [Sun, 16 May 2021 10:34:42 +0000 (12:34 +0200)]
emit diagnostic after post-monomorphization errors
Emit a diagnostic when the monomorphized item collector
encounters errors during a step of the recursive item collection.
These post-monomorphization errors otherwise only show the
erroneous expression without a trace, making them very obscure
and hard to pinpoint whenever they happen in dependencies.