libsec: implement server side ECDHE key exchange with secp256r1, move DH state in TlsSec structure, simplify
implement ECDHE key exchange with secp256r1 on the server side, providing
perfect forward secrecy (tho slowly).
it is easier to just keep the ECDH/DH state in the TlsSec structure,
which fits better with the grouping of the functions. we do the cleanup
in tlsConnectionFree() now, so a lot of error handling logic could go
away.
reinvestigated some error paths and removed the ones that cannot error.
move functions to fit the logical grouping.
combine the code for signing handshake hashes (for client certs) and
DH parameters. provide digestDHparams() function to be shared between
server and client code.
libsec: fix memory leak of RSApub, avoid parsing certificate twice to extract rsa public key
instead of letting factotum_rsa_open() parse the certificate,
we pass in the rsa public key which is then matched against the
factotum keyring. this avoids parsing the x509 certificate
twice.
the sec->rsapub was not freed, so free it in tlsSecClose()
The /sys/lib/kbmap/ee file seemed to have CRs in it. If a first column in the table
(for modifier key) as 4 is for Alt Gr + Shift then the attached (UTF-8 without BOM)
should work as a replacement ee file.
hg: create system wide /sys/lib/hgrc to enabled hgwebfs extension
the openssl we currently use is outdated and will be removed
soon. webfs will handle the https for us with native tls code.
keys have to be stored in factotum for everyone who also wants
to commit directly.
ether82563: initial i217 support from http://www.9legacy.org/9legacy/patch/pc-ether82563-i210.diff (thanks k0ga)
This patch is only an adaptation for 9front of the patch located in
http://www.9legacy.org/9legacy/patch/pc-ether82563-i210.diff. The
major difference is that this patch ignores errors in checksum of
eeprom, because in my system the checksum was wrong. After 3 months,
I didn't have problems, and I think the patch can be used. although
it has some things that need to be fixed. If the link is inactive
when the system boots then it will remain inactive forever.
In plan9port this bug keeps crashing mc when I run lc in a directory with Chinese characters. This is a diff from OpenBSD but it should apply cleanly to the various plan9 sources.
The code is basically trying to do a realloc (I guess realloc wasn't available back then?) but it copies too much from the original buffer.
Since realloc is available, just use it. If realloc isn't available outside plan9port (I haven't checked) the memmove line should be changed from:
memmove(f->subf, of, (f->nsubf+DSUBF)*sizeof *subf);
to:
memmove(f->subf, of, f->nsubf*sizeof *subf);
cinap_lenrek [Wed, 30 Mar 2016 20:49:13 +0000 (22:49 +0200)]
devsegment: cleanups
- return distinct error message when attempting to create Globalseg with physseg name
- copy directory name to up->genbuf so it stays valid after we unlock(&glogalseglock)
- cleanup wstat() handling, allow changing uid
- make sure global segment size is below SEGMAXSIZE
- move isoverlap() check from globalsegattach() into segattach()
- remove Proc* argument from globalsegattach(), segattach() and isoverlap()
- make Physseg.attr and segattach attr parameter an int for consistency
cinap_lenrek [Mon, 28 Mar 2016 18:12:54 +0000 (20:12 +0200)]
devtls: print the path of the underlying chan in status file
to figure out what network connection a particular tls
conversation refers to, we add the path of the underlying
we send the encrypted tls traffic over in the status file,
example:
I have ported my small MPEG-TS analisis tool to Plan9.
To allow this application working I had to fix a bug in the kernel IPv4 code and increase UDP input buffer.
Bug is related to listening for IPv4 multicast traffic. There is no problem if you listen for only one group or multiple groups with different UDP ports. This works:
Write to UDP ctl:
anounce PORT
addmulti INTERFACE_ADDR MULTICAST_ADDR
headers
and you can read packets from data file.
You need to set headers option because otherwise every UDP packet for MULTICAST_ADDR!PORT is treat as separate connection. This is a bug and should be fixed too, but I didn't tried it.
There is a problem when you need to receive packets for multiple multicast groups. Usually the same destination port is used by multiple streams and above sequence of commands fails for second group because the port is the same.
Simple and probably non-intrusive fix is adding "|| ipismulticast(addr)" to if statement at /sys/src/9/ip/devip.c:861 line:
if(ipforme(c->p->f, addr) || ipismulticast(addr))
This fixes the problem and now you can use the following sequence to listen for multiple multicast groups even if they all have the same destination port:
After that my application started working but signals packet drops at >2 Mb/s input rate. The same is reported by kernel netlog. Increase capacity of UDP connection input queue fixes this problem /sys/src/9/ip/udp.c:153
cinap_lenrek [Sun, 27 Mar 2016 18:57:01 +0000 (20:57 +0200)]
zynq: introduce SG_FAULT to prevent access to AXI segment while PL is not ready
access to the axi segment hangs the machine when the fpga
is not programmed yet. to prevent access, we introduce a
new SG_FAULT flag, that when set on the Segment.type or
Physseg.attr, causes the fault handler to immidiately
return with an error (as if the segment would not be mapped).
during programming, we temporarily set the SG_FAULT flag
on the axi physseg, flush all processes tlb's that have
the segment mapped and when programming is done, we clear
the flag again.
cinap_lenrek [Sat, 26 Mar 2016 01:37:42 +0000 (02:37 +0100)]
kernel: fix tsleep()/twakeup()/tsemacquire() race
tsleep() used to cancel the timer with:
if(up->tt != nil)
timerdel(up);
which still can result in twakeup() to fire after tsleep()
returns (because we set Timer.tt to nil *before* we call the tfn).
in most cases, this is not an issue as the Rendez*
usually is just &up->sleep, but when it is dynamically allocated
or on the stack like in tsemacquire(), twakeup() will call
wakeup() on a potentially garbage Rendez structure!
to fix the race, we execute the wakup() with the Timer lock
held, and set p->trend to nil only after we called wakeup().
that way, the timerdel(); which unconditionally locks the Timer;
can act as a proper barrier and use up->trend == nil as the
condition if the timer has already fired.
cinap_lenrek [Thu, 17 Mar 2016 16:48:19 +0000 (17:48 +0100)]
abandon streaming experiment
for queue like non-seekable files, it is impossible to implement an
exportfs because one has to run the kernels devtab read() and write()
in separate processes, and that makes it impossible to maintain 9p message
order as the scheduler can come in and randomly schedule one process before
another.
so as soon as we have a transition from 9p -> syscalls, we'r screwed.
i currently see just two possibilities:
- introduce special file type like QTSEQ with strictly ordered i/o semantics
- fix all fileservers and exportfs to only do one outstanding i/o to QTSEQ files
which means maintaining a queue per fid
this doesnt propagate. so exporting slow 9p mount again will be limited
again by latency of the inner mount.
other option:
- return offset in Rread, so client can bring responses back into order. this
requires changing all fileservers and drivers to maintain such an per fid offset
and change the protocol to include it in the response, and also pass it to userspace
(new syscalls or pass it in TOS)
this only works for read pipelining, write is still screwed.
cinap_lenrek [Tue, 15 Mar 2016 21:31:03 +0000 (22:31 +0100)]
ppp: fix buffer overflow, set correct state after chap negotiation (thanks k0ga)
(ppp->secret comes from factotum and it can have any size)
This patch also sets the correct state after success and
failure cases in chap negotiation (without them the code was
working because it expected the other point to pass to net
phase or due to the timer).
cinap_lenrek [Tue, 15 Mar 2016 21:18:05 +0000 (22:18 +0100)]
ppp: md5 and mschap inside chap, do not request encryption with -c or -C (thanks k0ga)
p2.patch: Do not request encriptation with -c or -C in ppp
(it was a bit annoying request compression, and when the ACK
from the server was received then send a NAK).
p3.patch: Add support for md5 and mschap in in chap
(without this patch ppp was passing to the net stage
without worring about chap).