for t in $CFG_TARGET_TRIPLES
do
make_dir rt/$t
- for i in \
- isaac linenoise sync test libuv \
+ for i in \
+ isaac linenoise sync test libuv libuv/src \
arch/i386 arch/x86_64 arch/arm arch/mips
do
make_dir rt/$t/$i
+++ /dev/null
-# We borrow heavily from the kernel build setup, though we are simpler since
-# we don't have Kconfig tweaking settings on us.
-
-# The implicit make rules have it looking for RCS files, among other things.
-# We instead explicitly write all the rules we care about.
-# It's even quicker (saves ~200ms) to pass -r on the command line.
-MAKEFLAGS=-r
-
-# The source directory tree.
-srcdir := ../../../../..
-abs_srcdir := $(abspath $(srcdir))
-
-# The name of the builddir.
-builddir_name ?= out
-
-# The V=1 flag on command line makes us verbosely print command lines.
-ifdef V
- quiet=
-else
- quiet=quiet_
-endif
-
-# Specify BUILDTYPE=Release on the command line for a release build.
-BUILDTYPE ?= Debug
-
-# Directory all our build output goes into.
-# Note that this must be two directories beneath src/ for unit tests to pass,
-# as they reach into the src/ directory for data with relative paths.
-builddir ?= $(builddir_name)/$(BUILDTYPE)
-abs_builddir := $(abspath $(builddir))
-depsdir := $(builddir)/.deps
-
-# Object output directory.
-obj := $(builddir)/obj
-abs_obj := $(abspath $(obj))
-
-# We build up a list of every single one of the targets so we can slurp in the
-# generated dependency rule Makefiles in one pass.
-all_deps :=
-
-
-
-# C++ apps need to be linked with g++.
-#
-# Note: flock is used to seralize linking. Linking is a memory-intensive
-# process so running parallel links can often lead to thrashing. To disable
-# the serialization, override LINK via an envrionment variable as follows:
-#
-# export LINK=g++
-#
-# This will allow make to invoke N linker processes as specified in -jN.
-LINK ?= flock $(builddir)/linker.lock $(CXX)
-
-CC.target ?= $(CC)
-CFLAGS.target ?= $(CFLAGS)
-CXX.target ?= $(CXX)
-CXXFLAGS.target ?= $(CXXFLAGS)
-LINK.target ?= $(LINK)
-LDFLAGS.target ?= $(LDFLAGS)
-AR.target ?= $(AR)
-ARFLAGS.target ?= crs
-
-# N.B.: the logic of which commands to run should match the computation done
-# in gyp's make.py where ARFLAGS.host etc. is computed.
-# TODO(evan): move all cross-compilation logic to gyp-time so we don't need
-# to replicate this environment fallback in make as well.
-CC.host ?= gcc
-CFLAGS.host ?=
-CXX.host ?= g++
-CXXFLAGS.host ?=
-LINK.host ?= g++
-LDFLAGS.host ?=
-AR.host ?= ar
-ARFLAGS.host := crs
-
-# Define a dir function that can handle spaces.
-# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions
-# "leading spaces cannot appear in the text of the first argument as written.
-# These characters can be put into the argument value by variable substitution."
-empty :=
-space := $(empty) $(empty)
-
-# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces
-replace_spaces = $(subst $(space),?,$1)
-unreplace_spaces = $(subst ?,$(space),$1)
-dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1)))
-
-# Flags to make gcc output dependency info. Note that you need to be
-# careful here to use the flags that ccache and distcc can understand.
-# We write to a dep file on the side first and then rename at the end
-# so we can't end up with a broken dep file.
-depfile = $(depsdir)/$(call replace_spaces,$@).d
-DEPFLAGS = -MMD -MF $(depfile).raw
-
-# We have to fixup the deps output in a few ways.
-# (1) the file output should mention the proper .o file.
-# ccache or distcc lose the path to the target, so we convert a rule of
-# the form:
-# foobar.o: DEP1 DEP2
-# into
-# path/to/foobar.o: DEP1 DEP2
-# (2) we want missing files not to cause us to fail to build.
-# We want to rewrite
-# foobar.o: DEP1 DEP2 \
-# DEP3
-# to
-# DEP1:
-# DEP2:
-# DEP3:
-# so if the files are missing, they're just considered phony rules.
-# We have to do some pretty insane escaping to get those backslashes
-# and dollar signs past make, the shell, and sed at the same time.
-# Doesn't work with spaces, but that's fine: .d files have spaces in
-# their names replaced with other characters.
-define fixup_dep
-# The depfile may not exist if the input file didn't have any #includes.
-touch $(depfile).raw
-# Fixup path as in (1).
-sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile)
-# Add extra rules as in (2).
-# We remove slashes and replace spaces with new lines;
-# remove blank lines;
-# delete the first line and append a colon to the remaining lines.
-sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\
- grep -v '^$$' |\
- sed -e 1d -e 's|$$|:|' \
- >> $(depfile)
-rm $(depfile).raw
-endef
-
-# Command definitions:
-# - cmd_foo is the actual command to run;
-# - quiet_cmd_foo is the brief-output summary of the command.
-
-quiet_cmd_cc = CC($(TOOLSET)) $@
-cmd_cc = $(CC.$(TOOLSET)) $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c -o $@ $<
-
-quiet_cmd_cxx = CXX($(TOOLSET)) $@
-cmd_cxx = $(CXX.$(TOOLSET)) $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $<
-
-quiet_cmd_touch = TOUCH $@
-cmd_touch = touch $@
-
-quiet_cmd_copy = COPY $@
-# send stderr to /dev/null to ignore messages when linking directories.
-cmd_copy = ln -f "$<" "$@" 2>/dev/null || (rm -rf "$@" && cp -af "$<" "$@")
-
-quiet_cmd_alink = AR($(TOOLSET)) $@
-cmd_alink = rm -f $@ && $(AR.$(TOOLSET)) $(ARFLAGS.$(TOOLSET)) $@ $(filter %.o,$^)
-
-# Due to circular dependencies between libraries :(, we wrap the
-# special "figure out circular dependencies" flags around the entire
-# input list during linking.
-quiet_cmd_link = LINK($(TOOLSET)) $@
-cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ -Wl,--start-group $(LD_INPUTS) -Wl,--end-group $(LIBS)
-
-# We support two kinds of shared objects (.so):
-# 1) shared_library, which is just bundling together many dependent libraries
-# into a link line.
-# 2) loadable_module, which is generating a module intended for dlopen().
-#
-# They differ only slightly:
-# In the former case, we want to package all dependent code into the .so.
-# In the latter case, we want to package just the API exposed by the
-# outermost module.
-# This means shared_library uses --whole-archive, while loadable_module doesn't.
-# (Note that --whole-archive is incompatible with the --start-group used in
-# normal linking.)
-
-# Other shared-object link notes:
-# - Set SONAME to the library filename so our binaries don't reference
-# the local, absolute paths used on the link command-line.
-quiet_cmd_solink = SOLINK($(TOOLSET)) $@
-cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -Wl,-soname=$(@F) -o $@ -Wl,--whole-archive $(LD_INPUTS) -Wl,--no-whole-archive $(LIBS)
-
-quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@
-cmd_solink_module = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -Wl,-soname=$(@F) -o $@ -Wl,--start-group $(filter-out FORCE_DO_CMD, $^) -Wl,--end-group $(LIBS)
-
-
-# Define an escape_quotes function to escape single quotes.
-# This allows us to handle quotes properly as long as we always use
-# use single quotes and escape_quotes.
-escape_quotes = $(subst ','\'',$(1))
-# This comment is here just to include a ' to unconfuse syntax highlighting.
-# Define an escape_vars function to escape '$' variable syntax.
-# This allows us to read/write command lines with shell variables (e.g.
-# $LD_LIBRARY_PATH), without triggering make substitution.
-escape_vars = $(subst $$,$$$$,$(1))
-# Helper that expands to a shell command to echo a string exactly as it is in
-# make. This uses printf instead of echo because printf's behaviour with respect
-# to escape sequences is more portable than echo's across different shells
-# (e.g., dash, bash).
-exact_echo = printf '%s\n' '$(call escape_quotes,$(1))'
-
-# Helper to compare the command we're about to run against the command
-# we logged the last time we ran the command. Produces an empty
-# string (false) when the commands match.
-# Tricky point: Make has no string-equality test function.
-# The kernel uses the following, but it seems like it would have false
-# positives, where one string reordered its arguments.
-# arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
-# $(filter-out $(cmd_$@), $(cmd_$(1))))
-# We instead substitute each for the empty string into the other, and
-# say they're equal if both substitutions produce the empty string.
-# .d files contain ? instead of spaces, take that into account.
-command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\
- $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1))))
-
-# Helper that is non-empty when a prerequisite changes.
-# Normally make does this implicitly, but we force rules to always run
-# so we can check their command lines.
-# $? -- new prerequisites
-# $| -- order-only dependencies
-prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?))
-
-# Helper that executes all postbuilds, and deletes the output file when done
-# if any of the postbuilds failed.
-define do_postbuilds
- @E=0;\
- for p in $(POSTBUILDS); do\
- eval $$p;\
- F=$$?;\
- if [ $$F -ne 0 ]; then\
- E=$$F;\
- fi;\
- done;\
- if [ $$E -ne 0 ]; then\
- rm -rf "$@";\
- exit $$E;\
- fi
-endef
-
-# do_cmd: run a command via the above cmd_foo names, if necessary.
-# Should always run for a given target to handle command-line changes.
-# Second argument, if non-zero, makes it do asm/C/C++ dependency munging.
-# Third argument, if non-zero, makes it do POSTBUILDS processing.
-# Note: We intentionally do NOT call dirx for depfile, since it contains ? for
-# spaces already and dirx strips the ? characters.
-define do_cmd
-$(if $(or $(command_changed),$(prereq_changed)),
- @$(call exact_echo, $($(quiet)cmd_$(1)))
- @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))"
- $(if $(findstring flock,$(word 1,$(cmd_$1))),
- @$(cmd_$(1))
- @echo " $(quiet_cmd_$(1)): Finished",
- @$(cmd_$(1))
- )
- @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile)
- @$(if $(2),$(fixup_dep))
- $(if $(and $(3), $(POSTBUILDS)),
- $(call do_postbuilds)
- )
-)
-endef
-
-# Declare the "all" target first so it is the default,
-# even though we don't have the deps yet.
-.PHONY: all
-all:
-
-# Use FORCE_DO_CMD to force a target to run. Should be coupled with
-# do_cmd.
-.PHONY: FORCE_DO_CMD
-FORCE_DO_CMD:
-
-TOOLSET := target
-# Suffix rules, putting all outputs into $(obj).
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD
- @$(call do_cmd,cxx,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-
-ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
- $(findstring $(join ^,$(prefix)),\
- $(join ^,src/libuv/run-benchmarks.target.mk)))),)
- include src/libuv/run-benchmarks.target.mk
-endif
-ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
- $(findstring $(join ^,$(prefix)),\
- $(join ^,src/libuv/run-tests.target.mk)))),)
- include src/libuv/run-tests.target.mk
-endif
-ifeq ($(strip $(foreach prefix,$(NO_LOAD),\
- $(findstring $(join ^,$(prefix)),\
- $(join ^,src/libuv/uv.target.mk)))),)
- include src/libuv/uv.target.mk
-endif
-
-#quiet_cmd_regen_makefile = ACTION Regenerating $@
-#cmd_regen_makefile = ./src/libuv/build/gyp/gyp -fmake --ignore-environment "--toplevel-dir=." -Isrc/libuv/common.gypi "--depth=." "--generator-output=mk/libuv/mips/unix/linux" "-Ddefault_configuration=Default" "-Dcomponent=static_library" "-Dlibrary=static_library" "-Dtarget_arch=mips" "-DOS=linux" src/libuv/uv.gyp
-#Makefile: $(srcdir)/src/libuv/uv.gyp $(srcdir)/src/libuv/common.gypi
-# $(call do_cmd,regen_makefile)
-
-# "all" is a concatenation of the "all" targets from all the included
-# sub-makefiles. This is just here to clarify.
-all:
-
-# Add in dependency-tracking rules. $(all_deps) is the list of every single
-# target in our tree. Only consider the ones with .d (dependency) info:
-d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d))
-ifneq ($(d_files),)
- # Rather than include each individual .d file, concatenate them into a
- # single file which make is able to load faster. We split this into
- # commands that take 1000 files at a time to avoid overflowing the
- # command line.
- $(shell cat $(wordlist 1,1000,$(d_files)) > $(depsdir)/all.deps)
-
- ifneq ($(word 1001,$(d_files)),)
- $(error Found unprocessed dependency files (gyp didn't generate enough rules!))
- endif
-
- # make looks for ways to re-generate included makefiles, but in our case, we
- # don't have a direct way. Explicitly telling make that it has nothing to do
- # for them makes it go faster.
- $(depsdir)/all.deps: ;
-
- include $(depsdir)/all.deps
-endif
+++ /dev/null
-# This file is generated by gyp; do not edit.
-
-TOOLSET := target
-TARGET := run-benchmarks
-DEFS_Debug := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DDEBUG' \
- '-D_DEBUG' \
- '-DEV_VERIFY=2'
-
-# Flags passed to all source files.
-CFLAGS_Debug := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -g \
- -O0
-
-# Flags passed to only C files.
-CFLAGS_C_Debug :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Debug := -fno-rtti \
- -fno-exceptions
-
-INCS_Debug := -I$(srcdir)/src/libuv/include
-
-DEFS_Release := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DNDEBUG'
-
-# Flags passed to all source files.
-CFLAGS_Release := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -O3 \
- -fomit-frame-pointer \
- -fdata-sections \
- -ffunction-sections
-
-# Flags passed to only C files.
-CFLAGS_C_Release :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Release := -fno-rtti \
- -fno-exceptions
-
-INCS_Release := -I$(srcdir)/src/libuv/include
-
-OBJS := $(obj).target/$(TARGET)/src/libuv/test/benchmark-ares.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-getaddrinfo.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-ping-pongs.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-pound.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-pump.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-sizes.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-spawn.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-thread.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-tcp-write-batch.o \
- $(obj).target/$(TARGET)/src/libuv/test/benchmark-udp-packet-storm.o \
- $(obj).target/$(TARGET)/src/libuv/test/dns-server.o \
- $(obj).target/$(TARGET)/src/libuv/test/echo-server.o \
- $(obj).target/$(TARGET)/src/libuv/test/blackhole-server.o \
- $(obj).target/$(TARGET)/src/libuv/test/run-benchmarks.o \
- $(obj).target/$(TARGET)/src/libuv/test/runner.o \
- $(obj).target/$(TARGET)/src/libuv/test/runner-unix.o
-
-# Add to the list of files we specially track dependencies for.
-all_deps += $(OBJS)
-
-# Make sure our dependencies are built before any of us.
-$(OBJS): | $(obj).target/src/libuv/libuv.a
-
-# CFLAGS et al overrides must be target-local.
-# See "Target-specific Variable Values" in the GNU Make manual.
-$(OBJS): TOOLSET := $(TOOLSET)
-$(OBJS): GYP_CFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE))
-$(OBJS): GYP_CXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE))
-
-# Suffix rules, putting all outputs into $(obj).
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# End of this set of suffix rules
-### Rules for final target.
-LDFLAGS_Debug := -pthread
-
-LDFLAGS_Release := -pthread
-
-LIBS := -lrt
-
-$(builddir)/run-benchmarks: GYP_LDFLAGS := $(LDFLAGS_$(BUILDTYPE))
-$(builddir)/run-benchmarks: LIBS := $(LIBS)
-$(builddir)/run-benchmarks: LD_INPUTS := $(OBJS) $(obj).target/src/libuv/libuv.a
-$(builddir)/run-benchmarks: TOOLSET := $(TOOLSET)
-$(builddir)/run-benchmarks: $(OBJS) $(obj).target/src/libuv/libuv.a FORCE_DO_CMD
- $(call do_cmd,link)
-
-all_deps += $(builddir)/run-benchmarks
-# Add target alias
-.PHONY: run-benchmarks
-run-benchmarks: $(builddir)/run-benchmarks
-
-# Add executable to "all" target.
-.PHONY: all
-all: $(builddir)/run-benchmarks
-
+++ /dev/null
-# This file is generated by gyp; do not edit.
-
-TOOLSET := target
-TARGET := run-tests
-DEFS_Debug := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DDEBUG' \
- '-D_DEBUG' \
- '-DEV_VERIFY=2'
-
-# Flags passed to all source files.
-CFLAGS_Debug := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -g \
- -O0
-
-# Flags passed to only C files.
-CFLAGS_C_Debug :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Debug := -fno-rtti \
- -fno-exceptions
-
-INCS_Debug := -I$(srcdir)/src/libuv/include
-
-DEFS_Release := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DNDEBUG'
-
-# Flags passed to all source files.
-CFLAGS_Release := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -O3 \
- -fomit-frame-pointer \
- -fdata-sections \
- -ffunction-sections
-
-# Flags passed to only C files.
-CFLAGS_C_Release :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Release := -fno-rtti \
- -fno-exceptions
-
-INCS_Release := -I$(srcdir)/src/libuv/include
-
-OBJS := $(obj).target/$(TARGET)/src/libuv/test/blackhole-server.o \
- $(obj).target/$(TARGET)/src/libuv/test/echo-server.o \
- $(obj).target/$(TARGET)/src/libuv/test/run-tests.o \
- $(obj).target/$(TARGET)/src/libuv/test/runner.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-get-loadavg.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-util.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-async.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-callback-stack.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-connection-fail.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-cwd-and-chdir.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-delayed-accept.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-eio-overflow.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-fail-always.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-fs.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-fs-event.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-get-currentexe.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-get-memory.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-getaddrinfo.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-gethostbyname.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-getsockname.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-hrtime.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-idle.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-ipc.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-ipc-threads.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-loop-handles.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-multiple-listen.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-pass-always.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-ping-pong.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-pipe-bind-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-pipe-connect-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-platform-output.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-process-title.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-ref.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-shutdown-eof.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-spawn.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-stdio-over-pipes.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-bind-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-bind6-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-close.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-flags.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-connect-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-connect6-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-write-error.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-write-to-half-open-connection.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tcp-writealot.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-threadpool.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-mutexes.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-thread.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-timer-again.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-timer.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-tty.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-udp-dgram-too-big.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-udp-ipv6.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-udp-options.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-udp-send-and-recv.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-udp-multicast-join.o \
- $(obj).target/$(TARGET)/src/libuv/test/test-counters-init.o \
- $(obj).target/$(TARGET)/src/libuv/test/runner-unix.o
-
-# Add to the list of files we specially track dependencies for.
-all_deps += $(OBJS)
-
-# Make sure our dependencies are built before any of us.
-$(OBJS): | $(obj).target/src/libuv/libuv.a
-
-# CFLAGS et al overrides must be target-local.
-# See "Target-specific Variable Values" in the GNU Make manual.
-$(OBJS): TOOLSET := $(TOOLSET)
-$(OBJS): GYP_CFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE))
-$(OBJS): GYP_CXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE))
-
-# Suffix rules, putting all outputs into $(obj).
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# End of this set of suffix rules
-### Rules for final target.
-LDFLAGS_Debug := -pthread
-
-LDFLAGS_Release := -pthread
-
-LIBS := -lrt
-
-$(builddir)/run-tests: GYP_LDFLAGS := $(LDFLAGS_$(BUILDTYPE))
-$(builddir)/run-tests: LIBS := $(LIBS)
-$(builddir)/run-tests: LD_INPUTS := $(OBJS) $(obj).target/src/libuv/libuv.a
-$(builddir)/run-tests: TOOLSET := $(TOOLSET)
-$(builddir)/run-tests: $(OBJS) $(obj).target/src/libuv/libuv.a FORCE_DO_CMD
- $(call do_cmd,link)
-
-all_deps += $(builddir)/run-tests
-# Add target alias
-.PHONY: run-tests
-run-tests: $(builddir)/run-tests
-
-# Add executable to "all" target.
-.PHONY: all
-all: $(builddir)/run-tests
-
+++ /dev/null
-# This file is generated by gyp; do not edit.
-
-export builddir_name ?= mk/libuv/mips/unix/linux/./src/libuv/out
-.PHONY: all
-all:
- $(MAKE) -C ../.. uv run-benchmarks run-tests
+++ /dev/null
-# This file is generated by gyp; do not edit.
-
-TOOLSET := target
-TARGET := uv
-DEFS_Debug := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DHAVE_CONFIG_H' \
- '-DEV_CONFIG_H="config_linux.h"' \
- '-DEIO_CONFIG_H="config_linux.h"' \
- '-DDEBUG' \
- '-D_DEBUG' \
- '-DEV_VERIFY=2'
-
-# Flags passed to all source files.
-CFLAGS_Debug := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -g \
- --std=gnu89 \
- -pedantic \
- -Wall \
- -Wextra \
- -Wno-unused-parameter \
- -g \
- -O0 \
- -fPIC
-
-# Flags passed to only C files.
-CFLAGS_C_Debug :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Debug := -fno-rtti \
- -fno-exceptions
-
-INCS_Debug := -I$(srcdir)/src/libuv/include \
- -I$(srcdir)/src/libuv/include/uv-private \
- -I$(srcdir)/src/libuv/src \
- -I$(srcdir)/src/libuv/src/unix/ev \
- -I$(srcdir)/src/libuv/src/ares/config_linux
-
-DEFS_Release := '-D_LARGEFILE_SOURCE' \
- '-D_FILE_OFFSET_BITS=64' \
- '-D_GNU_SOURCE' \
- '-DEIO_STACKSIZE=262144' \
- '-DHAVE_CONFIG_H' \
- '-DEV_CONFIG_H="config_linux.h"' \
- '-DEIO_CONFIG_H="config_linux.h"' \
- '-DNDEBUG'
-
-# Flags passed to all source files.
-CFLAGS_Release := -pthread \
- -Wall \
- -ansi \
- -pthread \
- -fvisibility=hidden \
- -g \
- --std=gnu89 \
- -pedantic \
- -Wall \
- -Wextra \
- -Wno-unused-parameter \
- -O3 \
- -fomit-frame-pointer \
- -fdata-sections \
- -ffunction-sections \
- -fPIC
-
-# Flags passed to only C files.
-CFLAGS_C_Release :=
-
-# Flags passed to only C++ files.
-CFLAGS_CC_Release := -fno-rtti \
- -fno-exceptions
-
-INCS_Release := -I$(srcdir)/src/libuv/include \
- -I$(srcdir)/src/libuv/include/uv-private \
- -I$(srcdir)/src/libuv/src \
- -I$(srcdir)/src/libuv/src/unix/ev \
- -I$(srcdir)/src/libuv/src/ares/config_linux
-
-OBJS := $(obj).target/$(TARGET)/src/libuv/src/uv-common.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_cancel.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares__close_sockets.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_data.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_destroy.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_expand_name.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_expand_string.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_fds.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_free_hostent.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_free_string.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_gethostbyaddr.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_gethostbyname.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares__get_hostent.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_getnameinfo.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_getopt.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_getsock.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_init.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_library_init.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_llist.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_mkquery.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_nowarn.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_options.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_aaaa_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_a_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_mx_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_ns_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_ptr_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_srv_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_parse_txt_reply.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_process.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_query.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares__read_line.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_search.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_send.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_strcasecmp.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_strdup.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_strerror.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_timeout.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares__timeval.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_version.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/ares_writev.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/bitncmp.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/inet_net_pton.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/inet_ntop.o \
- $(obj).target/$(TARGET)/src/libuv/src/ares/windows_port.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/core.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/uv-eio.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/fs.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/udp.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/tcp.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/pipe.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/tty.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/stream.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/cares.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/dl.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/error.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/thread.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/process.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/eio/eio.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/ev/ev.o \
- $(obj).target/$(TARGET)/src/libuv/src/unix/linux.o
-
-# Add to the list of files we specially track dependencies for.
-all_deps += $(OBJS)
-
-# CFLAGS et al overrides must be target-local.
-# See "Target-specific Variable Values" in the GNU Make manual.
-$(OBJS): TOOLSET := $(TOOLSET)
-$(OBJS): GYP_CFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_C_$(BUILDTYPE))
-$(OBJS): GYP_CXXFLAGS := $(DEFS_$(BUILDTYPE)) $(INCS_$(BUILDTYPE)) $(CFLAGS_$(BUILDTYPE)) $(CFLAGS_CC_$(BUILDTYPE))
-
-# Suffix rules, putting all outputs into $(obj).
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(srcdir)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# Try building from generated source, too.
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-$(obj).$(TOOLSET)/$(TARGET)/%.o: $(obj)/%.c FORCE_DO_CMD
- @$(call do_cmd,cc,1)
-
-# End of this set of suffix rules
-### Rules for final target.
-LDFLAGS_Debug := -pthread
-
-LDFLAGS_Release := -pthread
-
-LIBS := -lm
-
-$(obj).target/src/libuv/libuv.a: GYP_LDFLAGS := $(LDFLAGS_$(BUILDTYPE))
-$(obj).target/src/libuv/libuv.a: LIBS := $(LIBS)
-$(obj).target/src/libuv/libuv.a: TOOLSET := $(TOOLSET)
-$(obj).target/src/libuv/libuv.a: $(OBJS) FORCE_DO_CMD
- $(call do_cmd,alink)
-
-all_deps += $(obj).target/src/libuv/libuv.a
-# Add target alias
-.PHONY: uv
-uv: $(obj).target/src/libuv/libuv.a
-
-# Add target alias to "all" target.
-.PHONY: all
-all: uv
-
projects / rust.git / commitdiff