]> git.lizzy.rs Git - rust.git/commitdiff
Rename diagnositc_list into error_codes
authorYuki OKUSHI <huyuumi.dev@gmail.com>
Wed, 17 Apr 2019 21:21:30 +0000 (06:21 +0900)
committerYuki OKUSHI <huyuumi.dev@gmail.com>
Wed, 17 Apr 2019 21:21:30 +0000 (06:21 +0900)
src/libsyntax/diagnostic_list.rs [deleted file]
src/libsyntax/error_codes.rs [new file with mode: 0644]

diff --git a/src/libsyntax/diagnostic_list.rs b/src/libsyntax/diagnostic_list.rs
deleted file mode 100644 (file)
index ac24475..0000000
+++ /dev/null
@@ -1,422 +0,0 @@
-#![allow(non_snake_case)]
-
-// Error messages for EXXXX errors.
-// Each message should start and end with a new line, and be wrapped to 80 characters.
-// In vim you can `:set tw=80` and use `gq` to wrap paragraphs. Use `:set tw=0` to disable.
-register_long_diagnostics! {
-
-E0178: r##"
-In types, the `+` type operator has low precedence, so it is often necessary
-to use parentheses.
-
-For example:
-
-```compile_fail,E0178
-trait Foo {}
-
-struct Bar<'a> {
-    w: &'a Foo + Copy,   // error, use &'a (Foo + Copy)
-    x: &'a Foo + 'a,     // error, use &'a (Foo + 'a)
-    y: &'a mut Foo + 'a, // error, use &'a mut (Foo + 'a)
-    z: fn() -> Foo + 'a, // error, use fn() -> (Foo + 'a)
-}
-```
-
-More details can be found in [RFC 438].
-
-[RFC 438]: https://github.com/rust-lang/rfcs/pull/438
-"##,
-
-E0536: r##"
-The `not` cfg-predicate was malformed.
-
-Erroneous code example:
-
-```compile_fail,E0536
-#[cfg(not())] // error: expected 1 cfg-pattern
-pub fn something() {}
-
-pub fn main() {}
-```
-
-The `not` predicate expects one cfg-pattern. Example:
-
-```
-#[cfg(not(target_os = "linux"))] // ok!
-pub fn something() {}
-
-pub fn main() {}
-```
-
-For more information about the cfg attribute, read:
-https://doc.rust-lang.org/reference.html#conditional-compilation
-"##,
-
-E0537: r##"
-An unknown predicate was used inside the `cfg` attribute.
-
-Erroneous code example:
-
-```compile_fail,E0537
-#[cfg(unknown())] // error: invalid predicate `unknown`
-pub fn something() {}
-
-pub fn main() {}
-```
-
-The `cfg` attribute supports only three kinds of predicates:
-
- * any
- * all
- * not
-
-Example:
-
-```
-#[cfg(not(target_os = "linux"))] // ok!
-pub fn something() {}
-
-pub fn main() {}
-```
-
-For more information about the cfg attribute, read:
-https://doc.rust-lang.org/reference.html#conditional-compilation
-"##,
-
-E0538: r##"
-Attribute contains same meta item more than once.
-
-Erroneous code example:
-
-```compile_fail,E0538
-#[deprecated(
-    since="1.0.0",
-    note="First deprecation note.",
-    note="Second deprecation note." // error: multiple same meta item
-)]
-fn deprecated_function() {}
-```
-
-Meta items are the key-value pairs inside of an attribute. Each key may only be
-used once in each attribute.
-
-To fix the problem, remove all but one of the meta items with the same key.
-
-Example:
-
-```
-#[deprecated(
-    since="1.0.0",
-    note="First deprecation note."
-)]
-fn deprecated_function() {}
-```
-"##,
-
-E0541: r##"
-An unknown meta item was used.
-
-Erroneous code example:
-
-```compile_fail,E0541
-#[deprecated(
-    since="1.0.0",
-    // error: unknown meta item
-    reason="Example invalid meta item. Should be 'note'")
-]
-fn deprecated_function() {}
-```
-
-Meta items are the key-value pairs inside of an attribute. The keys provided
-must be one of the valid keys for the specified attribute.
-
-To fix the problem, either remove the unknown meta item, or rename it if you
-provided the wrong name.
-
-In the erroneous code example above, the wrong name was provided, so changing
-to a correct one it will fix the error. Example:
-
-```
-#[deprecated(
-    since="1.0.0",
-    note="This is a valid meta item for the deprecated attribute."
-)]
-fn deprecated_function() {}
-```
-"##,
-
-E0552: r##"
-A unrecognized representation attribute was used.
-
-Erroneous code example:
-
-```compile_fail,E0552
-#[repr(D)] // error: unrecognized representation hint
-struct MyStruct {
-    my_field: usize
-}
-```
-
-You can use a `repr` attribute to tell the compiler how you want a struct or
-enum to be laid out in memory.
-
-Make sure you're using one of the supported options:
-
-```
-#[repr(C)] // ok!
-struct MyStruct {
-    my_field: usize
-}
-```
-
-For more information about specifying representations, see the ["Alternative
-Representations" section] of the Rustonomicon.
-
-["Alternative Representations" section]: https://doc.rust-lang.org/nomicon/other-reprs.html
-"##,
-
-E0554: r##"
-Feature attributes are only allowed on the nightly release channel. Stable or
-beta compilers will not comply.
-
-Example of erroneous code (on a stable compiler):
-
-```ignore (depends on release channel)
-#![feature(non_ascii_idents)] // error: #![feature] may not be used on the
-                              //        stable release channel
-```
-
-If you need the feature, make sure to use a nightly release of the compiler
-(but be warned that the feature may be removed or altered in the future).
-"##,
-
-E0557: r##"
-A feature attribute named a feature that has been removed.
-
-Erroneous code example:
-
-```compile_fail,E0557
-#![feature(managed_boxes)] // error: feature has been removed
-```
-
-Delete the offending feature attribute.
-"##,
-
-E0565: r##"
-A literal was used in a built-in attribute that doesn't support literals.
-
-Erroneous code example:
-
-```ignore (compile_fail not working here; see Issue #43707)
-#[inline("always")] // error: unsupported literal
-pub fn something() {}
-```
-
-Literals in attributes are new and largely unsupported in built-in attributes.
-Work to support literals where appropriate is ongoing. Try using an unquoted
-name instead:
-
-```
-#[inline(always)]
-pub fn something() {}
-```
-"##,
-
-E0583: r##"
-A file wasn't found for an out-of-line module.
-
-Erroneous code example:
-
-```ignore (compile_fail not working here; see Issue #43707)
-mod file_that_doesnt_exist; // error: file not found for module
-
-fn main() {}
-```
-
-Please be sure that a file corresponding to the module exists. If you
-want to use a module named `file_that_doesnt_exist`, you need to have a file
-named `file_that_doesnt_exist.rs` or `file_that_doesnt_exist/mod.rs` in the
-same directory.
-"##,
-
-E0585: r##"
-A documentation comment that doesn't document anything was found.
-
-Erroneous code example:
-
-```compile_fail,E0585
-fn main() {
-    // The following doc comment will fail:
-    /// This is a useless doc comment!
-}
-```
-
-Documentation comments need to be followed by items, including functions,
-types, modules, etc. Examples:
-
-```
-/// I'm documenting the following struct:
-struct Foo;
-
-/// I'm documenting the following function:
-fn foo() {}
-```
-"##,
-
-E0586: r##"
-An inclusive range was used with no end.
-
-Erroneous code example:
-
-```compile_fail,E0586
-fn main() {
-    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
-    let x = &tmp[1..=]; // error: inclusive range was used with no end
-}
-```
-
-An inclusive range needs an end in order to *include* it. If you just need a
-start and no end, use a non-inclusive range (with `..`):
-
-```
-fn main() {
-    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
-    let x = &tmp[1..]; // ok!
-}
-```
-
-Or put an end to your inclusive range:
-
-```
-fn main() {
-    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
-    let x = &tmp[1..=3]; // ok!
-}
-```
-"##,
-
-E0589: r##"
-The value of `N` that was specified for `repr(align(N))` was not a power
-of two, or was greater than 2^29.
-
-```compile_fail,E0589
-#[repr(align(15))] // error: invalid `repr(align)` attribute: not a power of two
-enum Foo {
-    Bar(u64),
-}
-```
-"##,
-
-E0658: r##"
-An unstable feature was used.
-
-Erroneous code example:
-
-```compile_fail,E658
-#[repr(u128)] // error: use of unstable library feature 'repr128'
-enum Foo {
-    Bar(u64),
-}
-```
-
-If you're using a stable or a beta version of rustc, you won't be able to use
-any unstable features. In order to do so, please switch to a nightly version of
-rustc (by using rustup).
-
-If you're using a nightly version of rustc, just add the corresponding feature
-to be able to use it:
-
-```
-#![feature(repr128)]
-
-#[repr(u128)] // ok!
-enum Foo {
-    Bar(u64),
-}
-```
-"##,
-
-E0633: r##"
-The `unwind` attribute was malformed.
-
-Erroneous code example:
-
-```ignore (compile_fail not working here; see Issue #43707)
-#[unwind()] // error: expected one argument
-pub extern fn something() {}
-
-fn main() {}
-```
-
-The `#[unwind]` attribute should be used as follows:
-
-- `#[unwind(aborts)]` -- specifies that if a non-Rust ABI function
-  should abort the process if it attempts to unwind. This is the safer
-  and preferred option.
-
-- `#[unwind(allowed)]` -- specifies that a non-Rust ABI function
-  should be allowed to unwind. This can easily result in Undefined
-  Behavior (UB), so be careful.
-
-NB. The default behavior here is "allowed", but this is unspecified
-and likely to change in the future.
-
-"##,
-
-E0705: r##"
-A `#![feature]` attribute was declared for a feature that is stable in
-the current edition, but not in all editions.
-
-Erroneous code example:
-
-```ignore (limited to a warning during 2018 edition development)
-#![feature(rust_2018_preview)]
-#![feature(test_2018_feature)] // error: the feature
-                               // `test_2018_feature` is
-                               // included in the Rust 2018 edition
-```
-
-"##,
-
-E0725: r##"
-A feature attribute named a feature that was disallowed in the compiler
-command line flags.
-
-Erroneous code example:
-
-```ignore (can't specify compiler flags from doctests)
-#![feature(never_type)] // error: the feature `never_type` is not in
-                        // the list of allowed features
-```
-
-Delete the offending feature attribute, or add it to the list of allowed
-features in the `-Z allow_features` flag.
-"##,
-
-}
-
-register_diagnostics! {
-    E0539, // incorrect meta item
-    E0540, // multiple rustc_deprecated attributes
-    E0542, // missing 'since'
-    E0543, // missing 'reason'
-    E0544, // multiple stability levels
-    E0545, // incorrect 'issue'
-    E0546, // missing 'feature'
-    E0547, // missing 'issue'
-//  E0548, // replaced with a generic attribute input check
-    E0549, // rustc_deprecated attribute must be paired with either stable or unstable attribute
-    E0550, // multiple deprecated attributes
-    E0551, // incorrect meta item
-    E0553, // multiple rustc_const_unstable attributes
-//  E0555, // replaced with a generic attribute input check
-    E0556, // malformed feature, expected just one word
-    E0584, // file for module `..` found at both .. and ..
-    E0629, // missing 'feature' (rustc_const_unstable)
-    E0630, // rustc_const_unstable attribute must be paired with stable/unstable attribute
-    E0693, // incorrect `repr(align)` attribute format
-    E0694, // an unknown tool name found in scoped attributes
-    E0703, // invalid ABI
-    E0704, // incorrect visibility restriction
-    E0717, // rustc_promotable without stability attribute
-}
diff --git a/src/libsyntax/error_codes.rs b/src/libsyntax/error_codes.rs
new file mode 100644 (file)
index 0000000..ac24475
--- /dev/null
@@ -0,0 +1,422 @@
+#![allow(non_snake_case)]
+
+// Error messages for EXXXX errors.
+// Each message should start and end with a new line, and be wrapped to 80 characters.
+// In vim you can `:set tw=80` and use `gq` to wrap paragraphs. Use `:set tw=0` to disable.
+register_long_diagnostics! {
+
+E0178: r##"
+In types, the `+` type operator has low precedence, so it is often necessary
+to use parentheses.
+
+For example:
+
+```compile_fail,E0178
+trait Foo {}
+
+struct Bar<'a> {
+    w: &'a Foo + Copy,   // error, use &'a (Foo + Copy)
+    x: &'a Foo + 'a,     // error, use &'a (Foo + 'a)
+    y: &'a mut Foo + 'a, // error, use &'a mut (Foo + 'a)
+    z: fn() -> Foo + 'a, // error, use fn() -> (Foo + 'a)
+}
+```
+
+More details can be found in [RFC 438].
+
+[RFC 438]: https://github.com/rust-lang/rfcs/pull/438
+"##,
+
+E0536: r##"
+The `not` cfg-predicate was malformed.
+
+Erroneous code example:
+
+```compile_fail,E0536
+#[cfg(not())] // error: expected 1 cfg-pattern
+pub fn something() {}
+
+pub fn main() {}
+```
+
+The `not` predicate expects one cfg-pattern. Example:
+
+```
+#[cfg(not(target_os = "linux"))] // ok!
+pub fn something() {}
+
+pub fn main() {}
+```
+
+For more information about the cfg attribute, read:
+https://doc.rust-lang.org/reference.html#conditional-compilation
+"##,
+
+E0537: r##"
+An unknown predicate was used inside the `cfg` attribute.
+
+Erroneous code example:
+
+```compile_fail,E0537
+#[cfg(unknown())] // error: invalid predicate `unknown`
+pub fn something() {}
+
+pub fn main() {}
+```
+
+The `cfg` attribute supports only three kinds of predicates:
+
+ * any
+ * all
+ * not
+
+Example:
+
+```
+#[cfg(not(target_os = "linux"))] // ok!
+pub fn something() {}
+
+pub fn main() {}
+```
+
+For more information about the cfg attribute, read:
+https://doc.rust-lang.org/reference.html#conditional-compilation
+"##,
+
+E0538: r##"
+Attribute contains same meta item more than once.
+
+Erroneous code example:
+
+```compile_fail,E0538
+#[deprecated(
+    since="1.0.0",
+    note="First deprecation note.",
+    note="Second deprecation note." // error: multiple same meta item
+)]
+fn deprecated_function() {}
+```
+
+Meta items are the key-value pairs inside of an attribute. Each key may only be
+used once in each attribute.
+
+To fix the problem, remove all but one of the meta items with the same key.
+
+Example:
+
+```
+#[deprecated(
+    since="1.0.0",
+    note="First deprecation note."
+)]
+fn deprecated_function() {}
+```
+"##,
+
+E0541: r##"
+An unknown meta item was used.
+
+Erroneous code example:
+
+```compile_fail,E0541
+#[deprecated(
+    since="1.0.0",
+    // error: unknown meta item
+    reason="Example invalid meta item. Should be 'note'")
+]
+fn deprecated_function() {}
+```
+
+Meta items are the key-value pairs inside of an attribute. The keys provided
+must be one of the valid keys for the specified attribute.
+
+To fix the problem, either remove the unknown meta item, or rename it if you
+provided the wrong name.
+
+In the erroneous code example above, the wrong name was provided, so changing
+to a correct one it will fix the error. Example:
+
+```
+#[deprecated(
+    since="1.0.0",
+    note="This is a valid meta item for the deprecated attribute."
+)]
+fn deprecated_function() {}
+```
+"##,
+
+E0552: r##"
+A unrecognized representation attribute was used.
+
+Erroneous code example:
+
+```compile_fail,E0552
+#[repr(D)] // error: unrecognized representation hint
+struct MyStruct {
+    my_field: usize
+}
+```
+
+You can use a `repr` attribute to tell the compiler how you want a struct or
+enum to be laid out in memory.
+
+Make sure you're using one of the supported options:
+
+```
+#[repr(C)] // ok!
+struct MyStruct {
+    my_field: usize
+}
+```
+
+For more information about specifying representations, see the ["Alternative
+Representations" section] of the Rustonomicon.
+
+["Alternative Representations" section]: https://doc.rust-lang.org/nomicon/other-reprs.html
+"##,
+
+E0554: r##"
+Feature attributes are only allowed on the nightly release channel. Stable or
+beta compilers will not comply.
+
+Example of erroneous code (on a stable compiler):
+
+```ignore (depends on release channel)
+#![feature(non_ascii_idents)] // error: #![feature] may not be used on the
+                              //        stable release channel
+```
+
+If you need the feature, make sure to use a nightly release of the compiler
+(but be warned that the feature may be removed or altered in the future).
+"##,
+
+E0557: r##"
+A feature attribute named a feature that has been removed.
+
+Erroneous code example:
+
+```compile_fail,E0557
+#![feature(managed_boxes)] // error: feature has been removed
+```
+
+Delete the offending feature attribute.
+"##,
+
+E0565: r##"
+A literal was used in a built-in attribute that doesn't support literals.
+
+Erroneous code example:
+
+```ignore (compile_fail not working here; see Issue #43707)
+#[inline("always")] // error: unsupported literal
+pub fn something() {}
+```
+
+Literals in attributes are new and largely unsupported in built-in attributes.
+Work to support literals where appropriate is ongoing. Try using an unquoted
+name instead:
+
+```
+#[inline(always)]
+pub fn something() {}
+```
+"##,
+
+E0583: r##"
+A file wasn't found for an out-of-line module.
+
+Erroneous code example:
+
+```ignore (compile_fail not working here; see Issue #43707)
+mod file_that_doesnt_exist; // error: file not found for module
+
+fn main() {}
+```
+
+Please be sure that a file corresponding to the module exists. If you
+want to use a module named `file_that_doesnt_exist`, you need to have a file
+named `file_that_doesnt_exist.rs` or `file_that_doesnt_exist/mod.rs` in the
+same directory.
+"##,
+
+E0585: r##"
+A documentation comment that doesn't document anything was found.
+
+Erroneous code example:
+
+```compile_fail,E0585
+fn main() {
+    // The following doc comment will fail:
+    /// This is a useless doc comment!
+}
+```
+
+Documentation comments need to be followed by items, including functions,
+types, modules, etc. Examples:
+
+```
+/// I'm documenting the following struct:
+struct Foo;
+
+/// I'm documenting the following function:
+fn foo() {}
+```
+"##,
+
+E0586: r##"
+An inclusive range was used with no end.
+
+Erroneous code example:
+
+```compile_fail,E0586
+fn main() {
+    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
+    let x = &tmp[1..=]; // error: inclusive range was used with no end
+}
+```
+
+An inclusive range needs an end in order to *include* it. If you just need a
+start and no end, use a non-inclusive range (with `..`):
+
+```
+fn main() {
+    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
+    let x = &tmp[1..]; // ok!
+}
+```
+
+Or put an end to your inclusive range:
+
+```
+fn main() {
+    let tmp = vec![0, 1, 2, 3, 4, 4, 3, 3, 2, 1];
+    let x = &tmp[1..=3]; // ok!
+}
+```
+"##,
+
+E0589: r##"
+The value of `N` that was specified for `repr(align(N))` was not a power
+of two, or was greater than 2^29.
+
+```compile_fail,E0589
+#[repr(align(15))] // error: invalid `repr(align)` attribute: not a power of two
+enum Foo {
+    Bar(u64),
+}
+```
+"##,
+
+E0658: r##"
+An unstable feature was used.
+
+Erroneous code example:
+
+```compile_fail,E658
+#[repr(u128)] // error: use of unstable library feature 'repr128'
+enum Foo {
+    Bar(u64),
+}
+```
+
+If you're using a stable or a beta version of rustc, you won't be able to use
+any unstable features. In order to do so, please switch to a nightly version of
+rustc (by using rustup).
+
+If you're using a nightly version of rustc, just add the corresponding feature
+to be able to use it:
+
+```
+#![feature(repr128)]
+
+#[repr(u128)] // ok!
+enum Foo {
+    Bar(u64),
+}
+```
+"##,
+
+E0633: r##"
+The `unwind` attribute was malformed.
+
+Erroneous code example:
+
+```ignore (compile_fail not working here; see Issue #43707)
+#[unwind()] // error: expected one argument
+pub extern fn something() {}
+
+fn main() {}
+```
+
+The `#[unwind]` attribute should be used as follows:
+
+- `#[unwind(aborts)]` -- specifies that if a non-Rust ABI function
+  should abort the process if it attempts to unwind. This is the safer
+  and preferred option.
+
+- `#[unwind(allowed)]` -- specifies that a non-Rust ABI function
+  should be allowed to unwind. This can easily result in Undefined
+  Behavior (UB), so be careful.
+
+NB. The default behavior here is "allowed", but this is unspecified
+and likely to change in the future.
+
+"##,
+
+E0705: r##"
+A `#![feature]` attribute was declared for a feature that is stable in
+the current edition, but not in all editions.
+
+Erroneous code example:
+
+```ignore (limited to a warning during 2018 edition development)
+#![feature(rust_2018_preview)]
+#![feature(test_2018_feature)] // error: the feature
+                               // `test_2018_feature` is
+                               // included in the Rust 2018 edition
+```
+
+"##,
+
+E0725: r##"
+A feature attribute named a feature that was disallowed in the compiler
+command line flags.
+
+Erroneous code example:
+
+```ignore (can't specify compiler flags from doctests)
+#![feature(never_type)] // error: the feature `never_type` is not in
+                        // the list of allowed features
+```
+
+Delete the offending feature attribute, or add it to the list of allowed
+features in the `-Z allow_features` flag.
+"##,
+
+}
+
+register_diagnostics! {
+    E0539, // incorrect meta item
+    E0540, // multiple rustc_deprecated attributes
+    E0542, // missing 'since'
+    E0543, // missing 'reason'
+    E0544, // multiple stability levels
+    E0545, // incorrect 'issue'
+    E0546, // missing 'feature'
+    E0547, // missing 'issue'
+//  E0548, // replaced with a generic attribute input check
+    E0549, // rustc_deprecated attribute must be paired with either stable or unstable attribute
+    E0550, // multiple deprecated attributes
+    E0551, // incorrect meta item
+    E0553, // multiple rustc_const_unstable attributes
+//  E0555, // replaced with a generic attribute input check
+    E0556, // malformed feature, expected just one word
+    E0584, // file for module `..` found at both .. and ..
+    E0629, // missing 'feature' (rustc_const_unstable)
+    E0630, // rustc_const_unstable attribute must be paired with stable/unstable attribute
+    E0693, // incorrect `repr(align)` attribute format
+    E0694, // an unknown tool name found in scoped attributes
+    E0703, // invalid ABI
+    E0704, // incorrect visibility restriction
+    E0717, // rustc_promotable without stability attribute
+}