zutil.c
zutil.h
- source files for sample programs:
-example.c
-minigzip.c
-See examples/README.examples for more
+ source files for sample programs
+See examples/README.examples
- unsupported contribution by third parties
+ unsupported contributions by third parties
See contrib/README.contrib
mv _match.o match.lo
rm -f _match.s
-example64.o: example.c zlib.h zconf.h
- $(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
+example.o: examples/example.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ examples/example.c
-minigzip64.o: minigzip.c zlib.h zconf.h
- $(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
+minigzip.o: examples/minigzip.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -c -o $@ examples/minigzip.c
+
+example64.o: examples/example.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ examples/example.c
+
+minigzip64.o: examples/minigzip.c zlib.h zconf.h
+ $(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ examples/minigzip.c
.SUFFIXES: .lo
+++ /dev/null
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-#include <stdio.h>
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-# define TESTFILE "foo-gz"
-#else
-# define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
- if (err != Z_OK) { \
- fprintf(stderr, "%s error: %d\n", msg, err); \
- exit(1); \
- } \
-}
-
-const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_deflate OF((Byte *compr, uLong comprLen));
-void test_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_flush OF((Byte *compr, uLong *comprLen));
-void test_sync OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate OF((Byte *compr, uLong comprLen));
-void test_dict_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-int main OF((int argc, char *argv[]));
-
-
-#ifdef Z_SOLO
-
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
- void *q;
- unsigned n, m;
-{
- q = Z_NULL;
- return calloc(n, m);
-}
-
-void myfree(void *q, void *p)
-{
- q = Z_NULL;
- free(p);
-}
-
-static alloc_func zalloc = myalloc;
-static free_func zfree = myfree;
-
-#else /* !Z_SOLO */
-
-static alloc_func zalloc = (alloc_func)0;
-static free_func zfree = (free_func)0;
-
-void test_compress OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_gzio OF((const char *fname,
- Byte *uncompr, uLong uncomprLen));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- uLong len = (uLong)strlen(hello)+1;
-
- err = compress(compr, &comprLen, (const Bytef*)hello, len);
- CHECK_ERR(err, "compress");
-
- strcpy((char*)uncompr, "garbage");
-
- err = uncompress(uncompr, &uncomprLen, compr, comprLen);
- CHECK_ERR(err, "uncompress");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad uncompress\n");
- exit(1);
- } else {
- printf("uncompress(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(fname, uncompr, uncomprLen)
- const char *fname; /* compressed file name */
- Byte *uncompr;
- uLong uncomprLen;
-{
-#ifdef NO_GZCOMPRESS
- fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
-#else
- int err;
- int len = (int)strlen(hello)+1;
- gzFile file;
- z_off_t pos;
-
- file = gzopen(fname, "wb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- exit(1);
- }
- gzputc(file, 'h');
- if (gzputs(file, "ello") != 4) {
- fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (gzprintf(file, ", %s!", "hello") != 8) {
- fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
- exit(1);
- }
- gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
- gzclose(file);
-
- file = gzopen(fname, "rb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- exit(1);
- }
- strcpy((char*)uncompr, "garbage");
-
- if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
- fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
- exit(1);
- } else {
- printf("gzread(): %s\n", (char*)uncompr);
- }
-
- pos = gzseek(file, -8L, SEEK_CUR);
- if (pos != 6 || gztell(file) != pos) {
- fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
- (long)pos, (long)gztell(file));
- exit(1);
- }
-
- if (gzgetc(file) != ' ') {
- fprintf(stderr, "gzgetc error\n");
- exit(1);
- }
-
- if (gzungetc(' ', file) != ' ') {
- fprintf(stderr, "gzungetc error\n");
- exit(1);
- }
-
- gzgets(file, (char*)uncompr, (int)uncomprLen);
- if (strlen((char*)uncompr) != 7) { /* " hello!" */
- fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello + 6)) {
- fprintf(stderr, "bad gzgets after gzseek\n");
- exit(1);
- } else {
- printf("gzgets() after gzseek: %s\n", (char*)uncompr);
- }
-
- gzclose(file);
-#endif
-}
-
-#endif /* Z_SOLO */
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- uLong len = (uLong)strlen(hello)+1;
-
- c_stream.zalloc = zalloc;
- c_stream.zfree = zfree;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
-
- while (c_stream.total_in != len && c_stream.total_out < comprLen) {
- c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- }
- /* Finish the stream, still forcing small buffers: */
- for (;;) {
- c_stream.avail_out = 1;
- err = deflate(&c_stream, Z_FINISH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "deflate");
- }
-
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = zalloc;
- d_stream.zfree = zfree;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 0;
- d_stream.next_out = uncompr;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
- d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate\n");
- exit(1);
- } else {
- printf("inflate(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = zalloc;
- c_stream.zfree = zfree;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_SPEED);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- /* At this point, uncompr is still mostly zeroes, so it should compress
- * very well:
- */
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- if (c_stream.avail_in != 0) {
- fprintf(stderr, "deflate not greedy\n");
- exit(1);
- }
-
- /* Feed in already compressed data and switch to no compression: */
- deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
- c_stream.next_in = compr;
- c_stream.avail_in = (uInt)comprLen/2;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- /* Switch back to compressing mode: */
- deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = zalloc;
- d_stream.zfree = zfree;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- for (;;) {
- d_stream.next_out = uncompr; /* discard the output */
- d_stream.avail_out = (uInt)uncomprLen;
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "large inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
- fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
- exit(1);
- } else {
- printf("large_inflate(): OK\n");
- }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
- Byte *compr;
- uLong *comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- uInt len = (uInt)strlen(hello)+1;
-
- c_stream.zalloc = zalloc;
- c_stream.zfree = zfree;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
- c_stream.avail_in = 3;
- c_stream.avail_out = (uInt)*comprLen;
- err = deflate(&c_stream, Z_FULL_FLUSH);
- CHECK_ERR(err, "deflate");
-
- compr[3]++; /* force an error in first compressed block */
- c_stream.avail_in = len - 3;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- CHECK_ERR(err, "deflate");
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-
- *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = zalloc;
- d_stream.zfree = zfree;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 2; /* just read the zlib header */
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- inflate(&d_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "inflate");
-
- d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
- err = inflateSync(&d_stream); /* but skip the damaged part */
- CHECK_ERR(err, "inflateSync");
-
- err = inflate(&d_stream, Z_FINISH);
- if (err != Z_DATA_ERROR) {
- fprintf(stderr, "inflate should report DATA_ERROR\n");
- /* Because of incorrect adler32 */
- exit(1);
- }
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = zalloc;
- c_stream.zfree = zfree;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- err = deflateSetDictionary(&c_stream,
- (const Bytef*)dictionary, (int)sizeof(dictionary));
- CHECK_ERR(err, "deflateSetDictionary");
-
- dictId = c_stream.adler;
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.avail_in = (uInt)strlen(hello)+1;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = zalloc;
- d_stream.zfree = zfree;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- for (;;) {
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- if (err == Z_NEED_DICT) {
- if (d_stream.adler != dictId) {
- fprintf(stderr, "unexpected dictionary");
- exit(1);
- }
- err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
- (int)sizeof(dictionary));
- }
- CHECK_ERR(err, "inflate with dict");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate with dict\n");
- exit(1);
- } else {
- printf("inflate with dictionary: %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Usage: example [output.gz [input.gz]]
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- Byte *compr, *uncompr;
- uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
- uLong uncomprLen = comprLen;
- static const char* myVersion = ZLIB_VERSION;
-
- if (zlibVersion()[0] != myVersion[0]) {
- fprintf(stderr, "incompatible zlib version\n");
- exit(1);
-
- } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
- fprintf(stderr, "warning: different zlib version\n");
- }
-
- printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
- ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
-
- compr = (Byte*)calloc((uInt)comprLen, 1);
- uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
- /* compr and uncompr are cleared to avoid reading uninitialized
- * data and to ensure that uncompr compresses well.
- */
- if (compr == Z_NULL || uncompr == Z_NULL) {
- printf("out of memory\n");
- exit(1);
- }
-
-#ifdef Z_SOLO
- argc = strlen(argv[0]);
-#else
- test_compress(compr, comprLen, uncompr, uncomprLen);
-
- test_gzio((argc > 1 ? argv[1] : TESTFILE),
- uncompr, uncomprLen);
-#endif
-
- test_deflate(compr, comprLen);
- test_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_large_deflate(compr, comprLen, uncompr, uncomprLen);
- test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_flush(compr, &comprLen);
- test_sync(compr, comprLen, uncompr, uncomprLen);
- comprLen = uncomprLen;
-
- test_dict_deflate(compr, comprLen);
- test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
- free(compr);
- free(uncompr);
-
- return 0;
-}
- calculates the maximum table space used in inflate tree
construction over all possible Huffman codes
+example.c
+ usage examples of zlib
+ - used in zlib build Makefile for testing
+
fitblk.c
compress just enough input to nearly fill a requested output size
- zlib isn't designed to do this, but fitblk does it anyway
and deflateSetDictionary()
- illustrates use of a gzip header extra field
+minigzip.c
+ minimal implementation of gzip-like functionality using zlib
+ - used in zlib build Makefile for testing
+ - is not meant for and should not be used as a gzip replacement
+
zlib_how.html
painfully comprehensive description of zpipe.c (see below)
- describes in excruciating detail the use of deflate() and inflate()
--- /dev/null
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+# define TESTFILE "foo-gz"
+#else
+# define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+ if (err != Z_OK) { \
+ fprintf(stderr, "%s error: %d\n", msg, err); \
+ exit(1); \
+ } \
+}
+
+const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+const char dictionary[] = "hello";
+uLong dictId; /* Adler32 value of the dictionary */
+
+void test_deflate OF((Byte *compr, uLong comprLen));
+void test_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_flush OF((Byte *compr, uLong *comprLen));
+void test_sync OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate OF((Byte *compr, uLong comprLen));
+void test_dict_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+int main OF((int argc, char *argv[]));
+
+
+#ifdef Z_SOLO
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ q = Z_NULL;
+ return calloc(n, m);
+}
+
+void myfree(void *q, void *p)
+{
+ q = Z_NULL;
+ free(p);
+}
+
+static alloc_func zalloc = myalloc;
+static free_func zfree = myfree;
+
+#else /* !Z_SOLO */
+
+static alloc_func zalloc = (alloc_func)0;
+static free_func zfree = (free_func)0;
+
+void test_compress OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_gzio OF((const char *fname,
+ Byte *uncompr, uLong uncomprLen));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ err = compress(compr, &comprLen, (const Bytef*)hello, len);
+ CHECK_ERR(err, "compress");
+
+ strcpy((char*)uncompr, "garbage");
+
+ err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+ CHECK_ERR(err, "uncompress");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad uncompress\n");
+ exit(1);
+ } else {
+ printf("uncompress(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(fname, uncompr, uncomprLen)
+ const char *fname; /* compressed file name */
+ Byte *uncompr;
+ uLong uncomprLen;
+{
+#ifdef NO_GZCOMPRESS
+ fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
+#else
+ int err;
+ int len = (int)strlen(hello)+1;
+ gzFile file;
+ z_off_t pos;
+
+ file = gzopen(fname, "wb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ gzputc(file, 'h');
+ if (gzputs(file, "ello") != 4) {
+ fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (gzprintf(file, ", %s!", "hello") != 8) {
+ fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+ gzclose(file);
+
+ file = gzopen(fname, "rb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ strcpy((char*)uncompr, "garbage");
+
+ if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
+ fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+ exit(1);
+ } else {
+ printf("gzread(): %s\n", (char*)uncompr);
+ }
+
+ pos = gzseek(file, -8L, SEEK_CUR);
+ if (pos != 6 || gztell(file) != pos) {
+ fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+ (long)pos, (long)gztell(file));
+ exit(1);
+ }
+
+ if (gzgetc(file) != ' ') {
+ fprintf(stderr, "gzgetc error\n");
+ exit(1);
+ }
+
+ if (gzungetc(' ', file) != ' ') {
+ fprintf(stderr, "gzungetc error\n");
+ exit(1);
+ }
+
+ gzgets(file, (char*)uncompr, (int)uncomprLen);
+ if (strlen((char*)uncompr) != 7) { /* " hello!" */
+ fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello + 6)) {
+ fprintf(stderr, "bad gzgets after gzseek\n");
+ exit(1);
+ } else {
+ printf("gzgets() after gzseek: %s\n", (char*)uncompr);
+ }
+
+ gzclose(file);
+#endif
+}
+
+#endif /* Z_SOLO */
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+
+ while (c_stream.total_in != len && c_stream.total_out < comprLen) {
+ c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ }
+ /* Finish the stream, still forcing small buffers: */
+ for (;;) {
+ c_stream.avail_out = 1;
+ err = deflate(&c_stream, Z_FINISH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "deflate");
+ }
+
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 0;
+ d_stream.next_out = uncompr;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+ d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate\n");
+ exit(1);
+ } else {
+ printf("inflate(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ /* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ */
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ if (c_stream.avail_in != 0) {
+ fprintf(stderr, "deflate not greedy\n");
+ exit(1);
+ }
+
+ /* Feed in already compressed data and switch to no compression: */
+ deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in = compr;
+ c_stream.avail_in = (uInt)comprLen/2;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ /* Switch back to compressing mode: */
+ deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ for (;;) {
+ d_stream.next_out = uncompr; /* discard the output */
+ d_stream.avail_out = (uInt)uncomprLen;
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "large inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+ fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+ exit(1);
+ } else {
+ printf("large_inflate(): OK\n");
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+ Byte *compr;
+ uLong *comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uInt len = (uInt)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+ c_stream.avail_in = 3;
+ c_stream.avail_out = (uInt)*comprLen;
+ err = deflate(&c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ compr[3]++; /* force an error in first compressed block */
+ c_stream.avail_in = len - 3;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ CHECK_ERR(err, "deflate");
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+
+ *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 2; /* just read the zlib header */
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ inflate(&d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "inflate");
+
+ d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
+ err = inflateSync(&d_stream); /* but skip the damaged part */
+ CHECK_ERR(err, "inflateSync");
+
+ err = inflate(&d_stream, Z_FINISH);
+ if (err != Z_DATA_ERROR) {
+ fprintf(stderr, "inflate should report DATA_ERROR\n");
+ /* Because of incorrect adler32 */
+ exit(1);
+ }
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ err = deflateSetDictionary(&c_stream,
+ (const Bytef*)dictionary, (int)sizeof(dictionary));
+ CHECK_ERR(err, "deflateSetDictionary");
+
+ dictId = c_stream.adler;
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.avail_in = (uInt)strlen(hello)+1;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ for (;;) {
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ if (err == Z_NEED_DICT) {
+ if (d_stream.adler != dictId) {
+ fprintf(stderr, "unexpected dictionary");
+ exit(1);
+ }
+ err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+ (int)sizeof(dictionary));
+ }
+ CHECK_ERR(err, "inflate with dict");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate with dict\n");
+ exit(1);
+ } else {
+ printf("inflate with dictionary: %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Usage: example [output.gz [input.gz]]
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ Byte *compr, *uncompr;
+ uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+ uLong uncomprLen = comprLen;
+ static const char* myVersion = ZLIB_VERSION;
+
+ if (zlibVersion()[0] != myVersion[0]) {
+ fprintf(stderr, "incompatible zlib version\n");
+ exit(1);
+
+ } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+ fprintf(stderr, "warning: different zlib version\n");
+ }
+
+ printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
+ ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
+
+ compr = (Byte*)calloc((uInt)comprLen, 1);
+ uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
+ /* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ */
+ if (compr == Z_NULL || uncompr == Z_NULL) {
+ printf("out of memory\n");
+ exit(1);
+ }
+
+#ifdef Z_SOLO
+ argc = strlen(argv[0]);
+#else
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+
+ test_gzio((argc > 1 ? argv[1] : TESTFILE),
+ uncompr, uncomprLen);
+#endif
+
+ test_deflate(compr, comprLen);
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_flush(compr, &comprLen);
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ comprLen = uncomprLen;
+
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ free(compr);
+ free(uncompr);
+
+ return 0;
+}
--- /dev/null
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef USE_MMAP
+# include <sys/types.h>
+# include <sys/mman.h>
+# include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# ifdef UNDER_CE
+# include <stdlib.h>
+# endif
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#ifdef VMS
+# define unlink delete
+# define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+# define unlink remove
+# define GZ_SUFFIX "-gz"
+# define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fileno */
+#endif
+
+#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+ extern int unlink OF((const char *));
+#endif
+#endif
+
+#if defined(UNDER_CE)
+# include <windows.h>
+# define perror(s) pwinerror(s)
+
+/* Map the Windows error number in ERROR to a locale-dependent error
+ message string and return a pointer to it. Typically, the values
+ for ERROR come from GetLastError.
+
+ The string pointed to shall not be modified by the application,
+ but may be overwritten by a subsequent call to strwinerror
+
+ The strwinerror function does not change the current setting
+ of GetLastError. */
+
+static char *strwinerror (error)
+ DWORD error;
+{
+ static char buf[1024];
+
+ wchar_t *msgbuf;
+ DWORD lasterr = GetLastError();
+ DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+ | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+ NULL,
+ error,
+ 0, /* Default language */
+ (LPVOID)&msgbuf,
+ 0,
+ NULL);
+ if (chars != 0) {
+ /* If there is an \r\n appended, zap it. */
+ if (chars >= 2
+ && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+ chars -= 2;
+ msgbuf[chars] = 0;
+ }
+
+ if (chars > sizeof (buf) - 1) {
+ chars = sizeof (buf) - 1;
+ msgbuf[chars] = 0;
+ }
+
+ wcstombs(buf, msgbuf, chars + 1);
+ LocalFree(msgbuf);
+ }
+ else {
+ sprintf(buf, "unknown win32 error (%ld)", error);
+ }
+
+ SetLastError(lasterr);
+ return buf;
+}
+
+static void pwinerror (s)
+ const char *s;
+{
+ if (s && *s)
+ fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
+ else
+ fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
+}
+
+#endif /* UNDER_CE */
+
+#ifndef GZ_SUFFIX
+# define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN 16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+# define local static
+ /* Needed for systems with limitation on stack size. */
+#else
+# define local
+#endif
+
+#ifdef Z_SOLO
+/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
+# include <unistd.h> /* for unlink() */
+#endif
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ q = Z_NULL;
+ return calloc(n, m);
+}
+
+void myfree(q, p)
+ void *q, *p;
+{
+ q = Z_NULL;
+ free(p);
+}
+
+typedef struct gzFile_s {
+ FILE *file;
+ int write;
+ int err;
+ char *msg;
+ z_stream strm;
+} *gzFile;
+
+gzFile gzopen OF((const char *, const char *));
+gzFile gzdopen OF((int, const char *));
+gzFile gz_open OF((const char *, int, const char *));
+
+gzFile gzopen(path, mode)
+const char *path;
+const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+gzFile gzdopen(fd, mode)
+int fd;
+const char *mode;
+{
+ return gz_open(NULL, fd, mode);
+}
+
+gzFile gz_open(path, fd, mode)
+ const char *path;
+ int fd;
+ const char *mode;
+{
+ gzFile gz;
+ int ret;
+
+ gz = malloc(sizeof(gzFile));
+ if (gz == NULL)
+ return NULL;
+ gz->write = strchr(mode, 'w') != NULL;
+ gz->strm.zalloc = myalloc;
+ gz->strm.zfree = myfree;
+ gz->strm.opaque = Z_NULL;
+ if (gz->write)
+ ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
+ else {
+ gz->strm.next_in = 0;
+ gz->strm.avail_in = Z_NULL;
+ ret = inflateInit2(&(gz->strm), 15 + 16);
+ }
+ if (ret != Z_OK) {
+ free(gz);
+ return NULL;
+ }
+ gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
+ fopen(path, gz->write ? "wb" : "rb");
+ if (gz->file == NULL) {
+ gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
+ free(gz);
+ return NULL;
+ }
+ gz->err = 0;
+ gz->msg = "";
+ return gz;
+}
+
+int gzwrite OF((gzFile, const void *, unsigned));
+
+int gzwrite(gz, buf, len)
+ gzFile gz;
+ const void *buf;
+ unsigned len;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL || !gz->write)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_in = (void *)buf;
+ strm->avail_in = len;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_NO_FLUSH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ return len;
+}
+
+int gzread OF((gzFile, void *, unsigned));
+
+int gzread(gz, buf, len)
+ gzFile gz;
+ void *buf;
+ unsigned len;
+{
+ int ret;
+ unsigned got;
+ unsigned char in[1];
+ z_stream *strm;
+
+ if (gz == NULL || gz->write)
+ return 0;
+ if (gz->err)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_out = (void *)buf;
+ strm->avail_out = len;
+ do {
+ got = fread(in, 1, 1, gz->file);
+ if (got == 0)
+ break;
+ strm->next_in = in;
+ strm->avail_in = 1;
+ ret = inflate(strm, Z_NO_FLUSH);
+ if (ret == Z_DATA_ERROR) {
+ gz->err = Z_DATA_ERROR;
+ gz->msg = strm->msg;
+ return 0;
+ }
+ if (ret == Z_STREAM_END)
+ inflateReset(strm);
+ } while (strm->avail_out);
+ return len - strm->avail_out;
+}
+
+int gzclose OF((gzFile));
+
+int gzclose(gz)
+ gzFile gz;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL)
+ return Z_STREAM_ERROR;
+ strm = &(gz->strm);
+ if (gz->write) {
+ strm->next_in = Z_NULL;
+ strm->avail_in = 0;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_FINISH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ deflateEnd(strm);
+ }
+ else
+ inflateEnd(strm);
+ fclose(gz->file);
+ free(gz);
+ return Z_OK;
+}
+
+const char *gzerror OF((gzFile, int *));
+
+const char *gzerror(gz, err)
+ gzFile gz;
+ int *err;
+{
+ *err = gz->err;
+ return gz->msg;
+}
+
+#endif
+
+char *prog;
+
+void error OF((const char *msg));
+void gz_compress OF((FILE *in, gzFile out));
+#ifdef USE_MMAP
+int gz_compress_mmap OF((FILE *in, gzFile out));
+#endif
+void gz_uncompress OF((gzFile in, FILE *out));
+void file_compress OF((char *file, char *mode));
+void file_uncompress OF((char *file));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+ const char *msg;
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+ FILE *in;
+ gzFile out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+#ifdef USE_MMAP
+ /* Try first compressing with mmap. If mmap fails (minigzip used in a
+ * pipe), use the normal fread loop.
+ */
+ if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+ for (;;) {
+ len = (int)fread(buf, 1, sizeof(buf), in);
+ if (ferror(in)) {
+ perror("fread");
+ exit(1);
+ }
+ if (len == 0) break;
+
+ if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+ }
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+ FILE *in;
+ gzFile out;
+{
+ int len;
+ int err;
+ int ifd = fileno(in);
+ caddr_t buf; /* mmap'ed buffer for the entire input file */
+ off_t buf_len; /* length of the input file */
+ struct stat sb;
+
+ /* Determine the size of the file, needed for mmap: */
+ if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+ buf_len = sb.st_size;
+ if (buf_len <= 0) return Z_ERRNO;
+
+ /* Now do the actual mmap: */
+ buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+ if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+ /* Compress the whole file at once: */
+ len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+ if (len != (int)buf_len) error(gzerror(out, &err));
+
+ munmap(buf, buf_len);
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+ return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+ gzFile in;
+ FILE *out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+ for (;;) {
+ len = gzread(in, buf, sizeof(buf));
+ if (len < 0) error (gzerror(in, &err));
+ if (len == 0) break;
+
+ if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+ error("failed fwrite");
+ }
+ }
+ if (fclose(out)) error("failed fclose");
+
+ if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+ char *file;
+ char *mode;
+{
+ local char outfile[MAX_NAME_LEN];
+ FILE *in;
+ gzFile out;
+
+ if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+ strcpy(outfile, file);
+ strcat(outfile, GZ_SUFFIX);
+
+ in = fopen(file, "rb");
+ if (in == NULL) {
+ perror(file);
+ exit(1);
+ }
+ out = gzopen(outfile, mode);
+ if (out == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+ exit(1);
+ }
+ gz_compress(in, out);
+
+ unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+ char *file;
+{
+ local char buf[MAX_NAME_LEN];
+ char *infile, *outfile;
+ FILE *out;
+ gzFile in;
+ size_t len = strlen(file);
+
+ if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+ strcpy(buf, file);
+
+ if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+ infile = file;
+ outfile = buf;
+ outfile[len-3] = '\0';
+ } else {
+ outfile = file;
+ infile = buf;
+ strcat(infile, GZ_SUFFIX);
+ }
+ in = gzopen(infile, "rb");
+ if (in == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+ exit(1);
+ }
+ out = fopen(outfile, "wb");
+ if (out == NULL) {
+ perror(file);
+ exit(1);
+ }
+
+ gz_uncompress(in, out);
+
+ unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
+ * -c : write to standard output
+ * -d : decompress
+ * -f : compress with Z_FILTERED
+ * -h : compress with Z_HUFFMAN_ONLY
+ * -r : compress with Z_RLE
+ * -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ int copyout = 0;
+ int uncompr = 0;
+ gzFile file;
+ char *bname, outmode[20];
+
+ strcpy(outmode, "wb6 ");
+
+ prog = argv[0];
+ bname = strrchr(argv[0], '/');
+ if (bname)
+ bname++;
+ else
+ bname = argv[0];
+ argc--, argv++;
+
+ if (!strcmp(bname, "gunzip"))
+ uncompr = 1;
+ else if (!strcmp(bname, "zcat"))
+ copyout = uncompr = 1;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "-c") == 0)
+ copyout = 1;
+ else if (strcmp(*argv, "-d") == 0)
+ uncompr = 1;
+ else if (strcmp(*argv, "-f") == 0)
+ outmode[3] = 'f';
+ else if (strcmp(*argv, "-h") == 0)
+ outmode[3] = 'h';
+ else if (strcmp(*argv, "-r") == 0)
+ outmode[3] = 'R';
+ else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+ (*argv)[2] == 0)
+ outmode[2] = (*argv)[1];
+ else
+ break;
+ argc--, argv++;
+ }
+ if (outmode[3] == ' ')
+ outmode[3] = 0;
+ if (argc == 0) {
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+ if (uncompr) {
+ file = gzdopen(fileno(stdin), "rb");
+ if (file == NULL) error("can't gzdopen stdin");
+ gz_uncompress(file, stdout);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+ gz_compress(stdin, file);
+ }
+ } else {
+ if (copyout) {
+ SET_BINARY_MODE(stdout);
+ }
+ do {
+ if (uncompr) {
+ if (copyout) {
+ file = gzopen(*argv, "rb");
+ if (file == NULL)
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
+ else
+ gz_uncompress(file, stdout);
+ } else {
+ file_uncompress(*argv);
+ }
+ } else {
+ if (copyout) {
+ FILE * in = fopen(*argv, "rb");
+
+ if (in == NULL) {
+ perror(*argv);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+
+ gz_compress(in, file);
+ }
+
+ } else {
+ file_compress(*argv, outmode);
+ }
+ }
+ } while (argv++, --argc);
+ }
+ return 0;
+}
+++ /dev/null
-/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * minigzip is a minimal implementation of the gzip utility. This is
- * only an example of using zlib and isn't meant to replace the
- * full-featured gzip. No attempt is made to deal with file systems
- * limiting names to 14 or 8+3 characters, etc... Error checking is
- * very limited. So use minigzip only for testing; use gzip for the
- * real thing. On MSDOS, use only on file names without extension
- * or in pipe mode.
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-#include <stdio.h>
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#endif
-
-#ifdef USE_MMAP
-# include <sys/types.h>
-# include <sys/mman.h>
-# include <sys/stat.h>
-#endif
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
-# include <fcntl.h>
-# include <io.h>
-# ifdef UNDER_CE
-# include <stdlib.h>
-# endif
-# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-# define SET_BINARY_MODE(file)
-#endif
-
-#ifdef VMS
-# define unlink delete
-# define GZ_SUFFIX "-gz"
-#endif
-#ifdef RISCOS
-# define unlink remove
-# define GZ_SUFFIX "-gz"
-# define fileno(file) file->__file
-#endif
-#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fileno */
-#endif
-
-#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
-#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
- extern int unlink OF((const char *));
-#endif
-#endif
-
-#if defined(UNDER_CE)
-# include <windows.h>
-# define perror(s) pwinerror(s)
-
-/* Map the Windows error number in ERROR to a locale-dependent error
- message string and return a pointer to it. Typically, the values
- for ERROR come from GetLastError.
-
- The string pointed to shall not be modified by the application,
- but may be overwritten by a subsequent call to strwinerror
-
- The strwinerror function does not change the current setting
- of GetLastError. */
-
-static char *strwinerror (error)
- DWORD error;
-{
- static char buf[1024];
-
- wchar_t *msgbuf;
- DWORD lasterr = GetLastError();
- DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
- | FORMAT_MESSAGE_ALLOCATE_BUFFER,
- NULL,
- error,
- 0, /* Default language */
- (LPVOID)&msgbuf,
- 0,
- NULL);
- if (chars != 0) {
- /* If there is an \r\n appended, zap it. */
- if (chars >= 2
- && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
- chars -= 2;
- msgbuf[chars] = 0;
- }
-
- if (chars > sizeof (buf) - 1) {
- chars = sizeof (buf) - 1;
- msgbuf[chars] = 0;
- }
-
- wcstombs(buf, msgbuf, chars + 1);
- LocalFree(msgbuf);
- }
- else {
- sprintf(buf, "unknown win32 error (%ld)", error);
- }
-
- SetLastError(lasterr);
- return buf;
-}
-
-static void pwinerror (s)
- const char *s;
-{
- if (s && *s)
- fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
- else
- fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
-}
-
-#endif /* UNDER_CE */
-
-#ifndef GZ_SUFFIX
-# define GZ_SUFFIX ".gz"
-#endif
-#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
-
-#define BUFLEN 16384
-#define MAX_NAME_LEN 1024
-
-#ifdef MAXSEG_64K
-# define local static
- /* Needed for systems with limitation on stack size. */
-#else
-# define local
-#endif
-
-#ifdef Z_SOLO
-/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
-
-#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
-# include <unistd.h> /* for unlink() */
-#endif
-
-void *myalloc OF((void *, unsigned, unsigned));
-void myfree OF((void *, void *));
-
-void *myalloc(q, n, m)
- void *q;
- unsigned n, m;
-{
- q = Z_NULL;
- return calloc(n, m);
-}
-
-void myfree(q, p)
- void *q, *p;
-{
- q = Z_NULL;
- free(p);
-}
-
-typedef struct gzFile_s {
- FILE *file;
- int write;
- int err;
- char *msg;
- z_stream strm;
-} *gzFile;
-
-gzFile gzopen OF((const char *, const char *));
-gzFile gzdopen OF((int, const char *));
-gzFile gz_open OF((const char *, int, const char *));
-
-gzFile gzopen(path, mode)
-const char *path;
-const char *mode;
-{
- return gz_open(path, -1, mode);
-}
-
-gzFile gzdopen(fd, mode)
-int fd;
-const char *mode;
-{
- return gz_open(NULL, fd, mode);
-}
-
-gzFile gz_open(path, fd, mode)
- const char *path;
- int fd;
- const char *mode;
-{
- gzFile gz;
- int ret;
-
- gz = malloc(sizeof(gzFile));
- if (gz == NULL)
- return NULL;
- gz->write = strchr(mode, 'w') != NULL;
- gz->strm.zalloc = myalloc;
- gz->strm.zfree = myfree;
- gz->strm.opaque = Z_NULL;
- if (gz->write)
- ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
- else {
- gz->strm.next_in = 0;
- gz->strm.avail_in = Z_NULL;
- ret = inflateInit2(&(gz->strm), 15 + 16);
- }
- if (ret != Z_OK) {
- free(gz);
- return NULL;
- }
- gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
- fopen(path, gz->write ? "wb" : "rb");
- if (gz->file == NULL) {
- gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
- free(gz);
- return NULL;
- }
- gz->err = 0;
- gz->msg = "";
- return gz;
-}
-
-int gzwrite OF((gzFile, const void *, unsigned));
-
-int gzwrite(gz, buf, len)
- gzFile gz;
- const void *buf;
- unsigned len;
-{
- z_stream *strm;
- unsigned char out[BUFLEN];
-
- if (gz == NULL || !gz->write)
- return 0;
- strm = &(gz->strm);
- strm->next_in = (void *)buf;
- strm->avail_in = len;
- do {
- strm->next_out = out;
- strm->avail_out = BUFLEN;
- (void)deflate(strm, Z_NO_FLUSH);
- fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
- } while (strm->avail_out == 0);
- return len;
-}
-
-int gzread OF((gzFile, void *, unsigned));
-
-int gzread(gz, buf, len)
- gzFile gz;
- void *buf;
- unsigned len;
-{
- int ret;
- unsigned got;
- unsigned char in[1];
- z_stream *strm;
-
- if (gz == NULL || gz->write)
- return 0;
- if (gz->err)
- return 0;
- strm = &(gz->strm);
- strm->next_out = (void *)buf;
- strm->avail_out = len;
- do {
- got = fread(in, 1, 1, gz->file);
- if (got == 0)
- break;
- strm->next_in = in;
- strm->avail_in = 1;
- ret = inflate(strm, Z_NO_FLUSH);
- if (ret == Z_DATA_ERROR) {
- gz->err = Z_DATA_ERROR;
- gz->msg = strm->msg;
- return 0;
- }
- if (ret == Z_STREAM_END)
- inflateReset(strm);
- } while (strm->avail_out);
- return len - strm->avail_out;
-}
-
-int gzclose OF((gzFile));
-
-int gzclose(gz)
- gzFile gz;
-{
- z_stream *strm;
- unsigned char out[BUFLEN];
-
- if (gz == NULL)
- return Z_STREAM_ERROR;
- strm = &(gz->strm);
- if (gz->write) {
- strm->next_in = Z_NULL;
- strm->avail_in = 0;
- do {
- strm->next_out = out;
- strm->avail_out = BUFLEN;
- (void)deflate(strm, Z_FINISH);
- fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
- } while (strm->avail_out == 0);
- deflateEnd(strm);
- }
- else
- inflateEnd(strm);
- fclose(gz->file);
- free(gz);
- return Z_OK;
-}
-
-const char *gzerror OF((gzFile, int *));
-
-const char *gzerror(gz, err)
- gzFile gz;
- int *err;
-{
- *err = gz->err;
- return gz->msg;
-}
-
-#endif
-
-char *prog;
-
-void error OF((const char *msg));
-void gz_compress OF((FILE *in, gzFile out));
-#ifdef USE_MMAP
-int gz_compress_mmap OF((FILE *in, gzFile out));
-#endif
-void gz_uncompress OF((gzFile in, FILE *out));
-void file_compress OF((char *file, char *mode));
-void file_uncompress OF((char *file));
-int main OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Display error message and exit
- */
-void error(msg)
- const char *msg;
-{
- fprintf(stderr, "%s: %s\n", prog, msg);
- exit(1);
-}
-
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-
-void gz_compress(in, out)
- FILE *in;
- gzFile out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
-#ifdef USE_MMAP
- /* Try first compressing with mmap. If mmap fails (minigzip used in a
- * pipe), use the normal fread loop.
- */
- if (gz_compress_mmap(in, out) == Z_OK) return;
-#endif
- for (;;) {
- len = (int)fread(buf, 1, sizeof(buf), in);
- if (ferror(in)) {
- perror("fread");
- exit(1);
- }
- if (len == 0) break;
-
- if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
- }
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
-#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
-
-/* Try compressing the input file at once using mmap. Return Z_OK if
- * if success, Z_ERRNO otherwise.
- */
-int gz_compress_mmap(in, out)
- FILE *in;
- gzFile out;
-{
- int len;
- int err;
- int ifd = fileno(in);
- caddr_t buf; /* mmap'ed buffer for the entire input file */
- off_t buf_len; /* length of the input file */
- struct stat sb;
-
- /* Determine the size of the file, needed for mmap: */
- if (fstat(ifd, &sb) < 0) return Z_ERRNO;
- buf_len = sb.st_size;
- if (buf_len <= 0) return Z_ERRNO;
-
- /* Now do the actual mmap: */
- buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
- if (buf == (caddr_t)(-1)) return Z_ERRNO;
-
- /* Compress the whole file at once: */
- len = gzwrite(out, (char *)buf, (unsigned)buf_len);
-
- if (len != (int)buf_len) error(gzerror(out, &err));
-
- munmap(buf, buf_len);
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
- return Z_OK;
-}
-#endif /* USE_MMAP */
-
-/* ===========================================================================
- * Uncompress input to output then close both files.
- */
-void gz_uncompress(in, out)
- gzFile in;
- FILE *out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
- for (;;) {
- len = gzread(in, buf, sizeof(buf));
- if (len < 0) error (gzerror(in, &err));
- if (len == 0) break;
-
- if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
- error("failed fwrite");
- }
- }
- if (fclose(out)) error("failed fclose");
-
- if (gzclose(in) != Z_OK) error("failed gzclose");
-}
-
-
-/* ===========================================================================
- * Compress the given file: create a corresponding .gz file and remove the
- * original.
- */
-void file_compress(file, mode)
- char *file;
- char *mode;
-{
- local char outfile[MAX_NAME_LEN];
- FILE *in;
- gzFile out;
-
- if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
- fprintf(stderr, "%s: filename too long\n", prog);
- exit(1);
- }
-
- strcpy(outfile, file);
- strcat(outfile, GZ_SUFFIX);
-
- in = fopen(file, "rb");
- if (in == NULL) {
- perror(file);
- exit(1);
- }
- out = gzopen(outfile, mode);
- if (out == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
- exit(1);
- }
- gz_compress(in, out);
-
- unlink(file);
-}
-
-
-/* ===========================================================================
- * Uncompress the given file and remove the original.
- */
-void file_uncompress(file)
- char *file;
-{
- local char buf[MAX_NAME_LEN];
- char *infile, *outfile;
- FILE *out;
- gzFile in;
- size_t len = strlen(file);
-
- if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
- fprintf(stderr, "%s: filename too long\n", prog);
- exit(1);
- }
-
- strcpy(buf, file);
-
- if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
- infile = file;
- outfile = buf;
- outfile[len-3] = '\0';
- } else {
- outfile = file;
- infile = buf;
- strcat(infile, GZ_SUFFIX);
- }
- in = gzopen(infile, "rb");
- if (in == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
- exit(1);
- }
- out = fopen(outfile, "wb");
- if (out == NULL) {
- perror(file);
- exit(1);
- }
-
- gz_uncompress(in, out);
-
- unlink(infile);
-}
-
-
-/* ===========================================================================
- * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
- * -c : write to standard output
- * -d : decompress
- * -f : compress with Z_FILTERED
- * -h : compress with Z_HUFFMAN_ONLY
- * -r : compress with Z_RLE
- * -1 to -9 : compression level
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- int copyout = 0;
- int uncompr = 0;
- gzFile file;
- char *bname, outmode[20];
-
- strcpy(outmode, "wb6 ");
-
- prog = argv[0];
- bname = strrchr(argv[0], '/');
- if (bname)
- bname++;
- else
- bname = argv[0];
- argc--, argv++;
-
- if (!strcmp(bname, "gunzip"))
- uncompr = 1;
- else if (!strcmp(bname, "zcat"))
- copyout = uncompr = 1;
-
- while (argc > 0) {
- if (strcmp(*argv, "-c") == 0)
- copyout = 1;
- else if (strcmp(*argv, "-d") == 0)
- uncompr = 1;
- else if (strcmp(*argv, "-f") == 0)
- outmode[3] = 'f';
- else if (strcmp(*argv, "-h") == 0)
- outmode[3] = 'h';
- else if (strcmp(*argv, "-r") == 0)
- outmode[3] = 'R';
- else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
- (*argv)[2] == 0)
- outmode[2] = (*argv)[1];
- else
- break;
- argc--, argv++;
- }
- if (outmode[3] == ' ')
- outmode[3] = 0;
- if (argc == 0) {
- SET_BINARY_MODE(stdin);
- SET_BINARY_MODE(stdout);
- if (uncompr) {
- file = gzdopen(fileno(stdin), "rb");
- if (file == NULL) error("can't gzdopen stdin");
- gz_uncompress(file, stdout);
- } else {
- file = gzdopen(fileno(stdout), outmode);
- if (file == NULL) error("can't gzdopen stdout");
- gz_compress(stdin, file);
- }
- } else {
- if (copyout) {
- SET_BINARY_MODE(stdout);
- }
- do {
- if (uncompr) {
- if (copyout) {
- file = gzopen(*argv, "rb");
- if (file == NULL)
- fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
- else
- gz_uncompress(file, stdout);
- } else {
- file_uncompress(*argv);
- }
- } else {
- if (copyout) {
- FILE * in = fopen(*argv, "rb");
-
- if (in == NULL) {
- perror(*argv);
- } else {
- file = gzdopen(fileno(stdout), outmode);
- if (file == NULL) error("can't gzdopen stdout");
-
- gz_compress(in, file);
- }
-
- } else {
- file_compress(*argv, outmode);
- }
- }
- } while (argv++, --argc);
- }
- return 0;
-}
projects / zlib.git / commitdiff