X-Git-Url: https://git.lizzy.rs/?a=blobdiff_plain;f=minetest.conf.example;h=4b4bda0c5e33b8894653563671f1e567d88f341c;hb=HEAD;hp=f31d9356aa8da58161865133be76d46c19df68eb;hpb=ae1caba6aaa6f0a13e70f195f371fd4e7a378491;p=dragonfireclient.git diff --git a/minetest.conf.example b/minetest.conf.example index f31d9356a..4b4bda0c5 100644 --- a/minetest.conf.example +++ b/minetest.conf.example @@ -30,7 +30,7 @@ # type: bool # pitch_move = false -# Fast movement (via the "special" key). +# Fast movement (via the "Aux1" key). # This requires the "fast" privilege on the server. # type: bool # fast_move = false @@ -61,7 +61,7 @@ # type: float # mouse_sensitivity = 0.2 -# If enabled, "special" key instead of "sneak" key is used for climbing down and +# If enabled, "Aux1" key instead of "Sneak" key is used for climbing down and # descending. # type: bool # aux1_descends = false @@ -70,15 +70,15 @@ # type: bool # doubletap_jump = false -# If disabled, "special" key is used to fly fast if both fly and fast mode are +# If disabled, "Aux1" key is used to fly fast if both fly and fast mode are # enabled. # type: bool # always_fly_fast = true -# The time in seconds it takes between repeated right clicks when holding the right -# mouse button. -# type: float -# repeat_rightclick_time = 0.25 +# The time in seconds it takes between repeated node placements when holding +# the place button. +# type: float min: 0.001 +# repeat_place_time = 0.25 # Automatically jump up single-node obstacles. # type: bool @@ -107,10 +107,10 @@ # type: bool # fixed_virtual_joystick = false -# (Android) Use virtual joystick to trigger "aux" button. -# If enabled, virtual joystick will also tap "aux" button when out of main circle. +# (Android) Use virtual joystick to trigger "Aux1" button. +# If enabled, virtual joystick will also tap "Aux1" button when out of main circle. # type: bool -# virtual_joystick_triggers_aux = false +# virtual_joystick_triggers_aux1 = false # Enable joysticks # type: bool @@ -121,16 +121,20 @@ # joystick_id = 0 # The type of joystick -# type: enum values: auto, generic, xbox +# type: enum values: auto, generic, xbox, dragonrise_gamecube # joystick_type = auto # The time in seconds it takes between repeated events # when holding down a joystick button combination. -# type: float +# type: float min: 0.001 # repeat_joystick_button_time = 0.17 +# The dead zone of the joystick +# type: int +# joystick_deadzone = 2048 + # The sensitivity of the joystick axes for moving the -# ingame view frustum around. +# in-game view frustum around. # type: float # joystick_frustum_sensitivity = 170 @@ -166,6 +170,16 @@ # type: key # keymap_sneak = KEY_LSHIFT +# Key for digging. +# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 +# type: key +# keymap_dig = KEY_LBUTTON + +# Key for placing. +# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 +# type: key +# keymap_place = KEY_RBUTTON + # Key for opening the inventory. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 # type: key @@ -174,7 +188,7 @@ # Key for moving fast in fast mode. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 # type: key -# keymap_special1 = KEY_KEY_E +# keymap_aux1 = KEY_KEY_E # Key for opening the chat window. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 @@ -204,7 +218,7 @@ # Key for toggling pitch move mode. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 # type: key -# keymap_pitchmove = KEY_KEY_L +# keymap_pitchmove = KEY_KEY_P # Key for toggling fast mode. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 @@ -254,7 +268,7 @@ # Key for toggling display of minimap. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 # type: key -# keymap_minimap = KEY_F9 +# keymap_minimap = KEY_KEY_V # Key for taking screenshots. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 @@ -469,7 +483,7 @@ # Key for switching between first- and third-person camera. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 # type: key -# keymap_camera_mode = KEY_F7 +# keymap_camera_mode = KEY_KEY_C # Key for increasing the viewing range. # See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3 @@ -489,7 +503,13 @@ ### Basic -# Enable VBO +# Whether name tag backgrounds should be shown by default. +# Mods may still set a background. +# type: bool +# show_nametag_backgrounds = true + +# Enable vertex buffer objects. +# This should greatly improve graphics performance. # type: bool # enable_vbo = true @@ -513,6 +533,11 @@ # type: bool # smooth_lighting = true +# Enables tradeoffs that reduce CPU load or increase rendering performance +# at the expense of minor visual glitches that do not impact game playability. +# type: bool +# performance_tradeoffs = false + # Clouds are a client side effect. # type: bool # enable_clouds = true @@ -531,7 +556,7 @@ ### Filtering -# Use mip mapping to scale textures. May slightly increase performance, +# Use mipmapping to scale textures. May slightly increase performance, # especially when using a high resolution texture pack. # Gamma correct downscaling is not supported. # type: bool @@ -550,9 +575,9 @@ # trilinear_filter = false # Filtered textures can blend RGB values with fully-transparent neighbors, -# which PNG optimizers usually discard, sometimes resulting in a dark or -# light edge to transparent textures. Apply this filter to clean that up -# at texture load time. +# which PNG optimizers usually discard, often resulting in dark or +# light edges to transparent textures. Apply a filter to clean that up +# at texture load time. This is automatically enabled if mipmapping is enabled. # type: bool # texture_clean_transparent = false @@ -560,24 +585,29 @@ # can be blurred, so automatically upscale them with nearest-neighbor # interpolation to preserve crisp pixels. This sets the minimum texture size # for the upscaled textures; higher values look sharper, but require more -# memory. Powers of 2 are recommended. Setting this higher than 1 may not -# have a visible effect unless bilinear/trilinear/anisotropic filtering is -# enabled. +# memory. Powers of 2 are recommended. This setting is ONLY applied if +# bilinear/trilinear/anisotropic filtering is enabled. # This is also used as the base node texture size for world-aligned # texture autoscaling. # type: int # texture_min_size = 64 -# Experimental option, might cause visible spaces between blocks -# when set to higher number than 0. +# Use multi-sample antialiasing (MSAA) to smooth out block edges. +# This algorithm smooths out the 3D viewport while keeping the image sharp, +# but it doesn't affect the insides of textures +# (which is especially noticeable with transparent textures). +# Visible spaces appear between nodes when shaders are disabled. +# If set to 0, MSAA is disabled. +# A restart is required after changing this option. # type: enum values: 0, 1, 2, 4, 8, 16 # fsaa = 0 -# Undersampling is similar to using lower screen resolution, but it applies +# Undersampling is similar to using a lower screen resolution, but it applies # to the game world only, keeping the GUI intact. -# It should give significant performance boost at the cost of less detailed image. -# type: enum values: 0, 2, 3, 4 -# undersampling = 0 +# It should give a significant performance boost at the cost of less detailed image. +# Higher values result in a less detailed image. +# type: int min: 1 max: 8 +# undersampling = 1 ### Shaders @@ -593,85 +623,112 @@ #### Tone Mapping -# Enables filmic tone mapping +# Enables Hable's 'Uncharted 2' filmic tone mapping. +# Simulates the tone curve of photographic film and how this approximates the +# appearance of high dynamic range images. Mid-range contrast is slightly +# enhanced, highlights and shadows are gradually compressed. # type: bool # tone_mapping = false -#### Bumpmapping +#### Waving Nodes -# Enables bumpmapping for textures. Normalmaps need to be supplied by the texture pack -# or need to be auto-generated. +# Set to true to enable waving liquids (like water). # Requires shaders to be enabled. # type: bool -# enable_bumpmapping = false +# enable_waving_water = false -# Enables on the fly normalmap generation (Emboss effect). -# Requires bumpmapping to be enabled. -# type: bool -# generate_normalmaps = false +# The maximum height of the surface of waving liquids. +# 4.0 = Wave height is two nodes. +# 0.0 = Wave doesn't move at all. +# Default is 1.0 (1/2 node). +# Requires waving liquids to be enabled. +# type: float min: 0 max: 4 +# water_wave_height = 1.0 -# Strength of generated normalmaps. -# type: float -# normalmaps_strength = 0.6 +# Length of liquid waves. +# Requires waving liquids to be enabled. +# type: float min: 0.1 +# water_wave_length = 20.0 -# Defines sampling step of texture. -# A higher value results in smoother normal maps. -# type: int min: 0 max: 2 -# normalmaps_smooth = 0 +# How fast liquid waves will move. Higher = faster. +# If negative, liquid waves will move backwards. +# Requires waving liquids to be enabled. +# type: float +# water_wave_speed = 5.0 -#### Parallax Occlusion +# Set to true to enable waving leaves. +# Requires shaders to be enabled. +# type: bool +# enable_waving_leaves = false -# Enables parallax occlusion mapping. +# Set to true to enable waving plants. # Requires shaders to be enabled. # type: bool -# enable_parallax_occlusion = false +# enable_waving_plants = false -# 0 = parallax occlusion with slope information (faster). -# 1 = relief mapping (slower, more accurate). -# type: int min: 0 max: 1 -# parallax_occlusion_mode = 1 +#### Dynamic shadows -# Strength of parallax. -# type: float -# 3d_paralax_strength = 0.025 +# Set to true to enable Shadow Mapping. +# Requires shaders to be enabled. +# type: bool +# enable_dynamic_shadows = false -# Number of parallax occlusion iterations. -# type: int -# parallax_occlusion_iterations = 4 +# Set the shadow strength gamma. +# Adjusts the intensity of in-game dynamic shadows. +# Lower value means lighter shadows, higher value means darker shadows. +# type: float min: 0.1 max: 10 +# shadow_strength_gamma = 1.0 -# Overall scale of parallax occlusion effect. -# type: float -# parallax_occlusion_scale = 0.08 +# Maximum distance to render shadows. +# type: float min: 10 max: 1000 +# shadow_map_max_distance = 120.0 -# Overall bias of parallax occlusion effect, usually scale/2. -# type: float -# parallax_occlusion_bias = 0.04 +# Texture size to render the shadow map on. +# This must be a power of two. +# Bigger numbers create better shadows but it is also more expensive. +# type: int min: 128 max: 8192 +# shadow_map_texture_size = 1024 -#### Waving Nodes +# Sets shadow texture quality to 32 bits. +# On false, 16 bits texture will be used. +# This can cause much more artifacts in the shadow. +# type: bool +# shadow_map_texture_32bit = true -# Set to true enables waving water. -# Requires shaders to be enabled. +# Enable Poisson disk filtering. +# On true uses Poisson disk to make "soft shadows". Otherwise uses PCF filtering. # type: bool -# enable_waving_water = false +# shadow_poisson_filter = true -# type: float -# water_wave_height = 1.0 +# Define shadow filtering quality. +# This simulates the soft shadows effect by applying a PCF or Poisson disk +# but also uses more resources. +# type: enum values: 0, 1, 2 +# shadow_filters = 1 -# type: float -# water_wave_length = 20.0 +# Enable colored shadows. +# On true translucent nodes cast colored shadows. This is expensive. +# type: bool +# shadow_map_color = false -# type: float -# water_wave_speed = 5.0 +# Spread a complete update of shadow map over given amount of frames. +# Higher values might make shadows laggy, lower values +# will consume more resources. +# Minimum value: 1; maximum value: 16 +# type: int min: 1 max: 16 +# shadow_update_frames = 8 -# Set to true enables waving leaves. -# Requires shaders to be enabled. -# type: bool -# enable_waving_leaves = false +# Set the soft shadow radius size. +# Lower values mean sharper shadows, bigger values mean softer shadows. +# Minimum value: 1.0; maximum value: 10.0 +# type: float min: 1 max: 10 +# shadow_soft_radius = 1.0 -# Set to true enables waving plants. -# Requires shaders to be enabled. -# type: bool -# enable_waving_plants = false +# Set the tilt of Sun/Moon orbit in degrees. +# Value of 0 means no tilt / vertical orbit. +# Minimum value: 0.0; maximum value: 60.0 +# type: float min: 0 max: 60 +# shadow_sky_body_orbit_tilt = 0.0 ### Advanced @@ -682,12 +739,12 @@ # If FPS would go higher than this, limit it by sleeping # to not waste CPU power for no benefit. -# type: int +# type: int min: 1 # fps_max = 60 -# Maximum FPS when game is paused. -# type: int -# pause_fps_max = 20 +# Maximum FPS when the window is not focused, or when the game is paused. +# type: int min: 1 +# fps_max_unfocused = 20 # Open the pause menu when the window's focus is lost. Does not pause if a formspec is # open. @@ -696,21 +753,21 @@ # View distance in nodes. # type: int min: 20 max: 4000 -# viewing_range = 100 +# viewing_range = 190 -# Camera near plane distance in nodes, between 0 and 0.5 -# Most users will not need to change this. +# Camera 'near clipping plane' distance in nodes, between 0 and 0.25 +# Only works on GLES platforms. Most users will not need to change this. # Increasing can reduce artifacting on weaker GPUs. # 0.1 = Default, 0.25 = Good value for weaker tablets. -# type: float min: 0 max: 0.5 +# type: float min: 0 max: 0.25 # near_plane = 0.1 -# Width component of the initial window size. -# type: int +# Width component of the initial window size. Ignored in fullscreen mode. +# type: int min: 1 # screen_w = 1024 -# Height component of the initial window size. -# type: int +# Height component of the initial window size. Ignored in fullscreen mode. +# type: int min: 1 # screen_h = 600 # Save window size automatically when modified. @@ -721,10 +778,6 @@ # type: bool # fullscreen = false -# Bits per pixel (aka color depth) in fullscreen mode. -# type: int -# fullscreen_bpp = 24 - # Vertical screen synchronization. # type: bool # vsync = false @@ -733,42 +786,51 @@ # type: int min: 45 max: 160 # fov = 72 -# Adjust the gamma encoding for the light tables. Higher numbers are brighter. -# This setting is for the client only and is ignored by the server. -# type: float min: 0.5 max: 3 +# Alters the light curve by applying 'gamma correction' to it. +# Higher values make middle and lower light levels brighter. +# Value '1.0' leaves the light curve unaltered. +# This only has significant effect on daylight and artificial +# light, it has very little effect on natural night light. +# type: float min: 0.33 max: 3 # display_gamma = 1.0 # Gradient of light curve at minimum light level. -# type: float min: 0 max: 4 +# Controls the contrast of the lowest light levels. +# type: float min: 0 max: 3 # lighting_alpha = 0.0 # Gradient of light curve at maximum light level. -# type: float min: 0 max: 4 +# Controls the contrast of the highest light levels. +# type: float min: 0 max: 3 # lighting_beta = 1.5 -# Strength of light curve mid-boost. -# type: float min: 0 max: 1 +# Strength of light curve boost. +# The 3 'boost' parameters define a range of the light +# curve that is boosted in brightness. +# type: float min: 0 max: 0.4 # lighting_boost = 0.2 -# Center of light curve mid-boost. +# Center of light curve boost range. +# Where 0.0 is minimum light level, 1.0 is maximum light level. # type: float min: 0 max: 1 # lighting_boost_center = 0.5 -# Spread of light curve mid-boost. -# Standard deviation of the mid-boost gaussian. -# type: float min: 0 max: 1 +# Spread of light curve boost range. +# Controls the width of the range to be boosted. +# Standard deviation of the light curve boost Gaussian. +# type: float min: 0 max: 0.4 # lighting_boost_spread = 0.2 # Path to texture directory. All textures are first searched from here. # type: path # texture_path = -# The rendering back-end for Irrlicht. +# The rendering back-end. # A restart is required after changing this. # Note: On Android, stick with OGLES1 if unsure! App may fail to start otherwise. -# On other platforms, OpenGL is recommended, and it’s the only driver with -# shader support currently. -# type: enum values: null, software, burningsvideo, direct3d8, direct3d9, opengl, ogles1, ogles2 +# On other platforms, OpenGL is recommended. +# Shaders are supported by OpenGL (desktop only) and OGLES2 (experimental) +# type: enum values: opengl, ogles1, ogles2 # video_driver = opengl # Radius of cloud area stated in number of 64 node cloud squares. @@ -799,6 +861,10 @@ # type: enum values: none, anaglyph, interlaced, topbottom, sidebyside, crossview, pageflip # 3d_mode = none +# Strength of 3D mode parallax. +# type: float +# 3d_paralax_strength = 0.025 + # In-game chat console height, between 0.1 (10%) and 1.0 (100%). # type: float min: 0.1 max: 1 # console_height = 0.6 @@ -836,10 +902,12 @@ # selectionbox_width = 2 # Crosshair color (R,G,B). +# Also controls the object crosshair color # type: string # crosshair_color = (255,255,255) # Crosshair alpha (opaqueness, between 0 and 255). +# This also applies to the object crosshair. # type: int min: 0 max: 255 # crosshair_alpha = 255 @@ -856,7 +924,7 @@ # type: float # hud_hotbar_max_width = 1.0 -# Modifies the size of the hudbar elements. +# Modifies the size of the HUD elements. # type: float # hud_scaling = 1.0 @@ -885,7 +953,7 @@ # True = 256 # False = 128 -# Useable to make minimap smoother on slower machines. +# Usable to make minimap smoother on slower machines. # type: bool # minimap_double_scan_height = true @@ -931,8 +999,14 @@ # autoscale_mode = disable # Show entity selection boxes +# A restart is required after changing this. # type: bool -# show_entity_selectionbox = true +# show_entity_selectionbox = false + +# Distance in nodes at which transparency depth sorting is enabled +# Use this to limit the performance impact of transparency depth sorting +# type: int min: 0 max: 128 +# transparency_sorting_distance = 16 ## Menus @@ -945,7 +1019,7 @@ # This will smooth over some of the rough edges, and blend # pixels when scaling down, at the cost of blurring some # edge pixels when images are scaled by non-integer sizes. -# type: float +# type: float min: 0.001 # gui_scaling = 1.0 # When gui_scaling_filter is true, all GUI images need to be @@ -969,50 +1043,87 @@ # type: bool # tooltip_append_itemname = false -# Whether FreeType fonts are used, requires FreeType support to be compiled in. # type: bool -# freetype = true - -# Path to TrueTypeFont or bitmap. -# type: filepath -# font_path = fonts/liberationsans.ttf +# font_bold = false -# type: int -# font_size = 16 +# type: bool +# font_italic = false -# Font shadow offset, if 0 then shadow will not be drawn. +# Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn. # type: int # font_shadow = 1 -# Font shadow alpha (opaqueness, between 0 and 255). +# Opaqueness (alpha) of the shadow behind the default font, between 0 and 255. # type: int min: 0 max: 255 # font_shadow_alpha = 127 +# Font size of the default font where 1 unit = 1 pixel at 96 DPI +# type: int min: 1 +# font_size = 16 + +# For pixel-style fonts that do not scale well, this ensures that font sizes used +# with this font will always be divisible by this value, in pixels. For instance, +# a pixel font 16 pixels tall should have this set to 16, so it will only ever be +# sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32. +# type: int min: 1 +# font_size_divisible_by = 1 + +# Path to the default font. Must be a TrueType font. +# The fallback font will be used if the font cannot be loaded. # type: filepath -# mono_font_path = fonts/liberationmono.ttf +# font_path = fonts/Arimo-Regular.ttf -# type: int -# mono_font_size = 15 +# type: filepath +# font_path_bold = fonts/Arimo-Bold.ttf -# This font will be used for certain languages. # type: filepath -# fallback_font_path = fonts/DroidSansFallbackFull.ttf +# font_path_italic = fonts/Arimo-Italic.ttf -# type: int -# fallback_font_size = 15 +# type: filepath +# font_path_bold_italic = fonts/Arimo-BoldItalic.ttf -# type: int -# fallback_font_shadow = 1 +# Font size of the monospace font where 1 unit = 1 pixel at 96 DPI +# type: int min: 1 +# mono_font_size = 16 -# type: int min: 0 max: 255 -# fallback_font_shadow_alpha = 128 +# For pixel-style fonts that do not scale well, this ensures that font sizes used +# with this font will always be divisible by this value, in pixels. For instance, +# a pixel font 16 pixels tall should have this set to 16, so it will only ever be +# sized 16, 32, 48, etc., so a mod requesting a size of 25 will get 32. +# type: int min: 1 +# mono_font_size_divisible_by = 1 + +# Path to the monospace font. Must be a TrueType font. +# This font is used for e.g. the console and profiler screen. +# type: filepath +# mono_font_path = fonts/Cousine-Regular.ttf + +# type: filepath +# mono_font_path_bold = fonts/Cousine-Bold.ttf + +# type: filepath +# mono_font_path_italic = fonts/Cousine-Italic.ttf -# Path to save screenshots at. +# type: filepath +# mono_font_path_bold_italic = fonts/Cousine-BoldItalic.ttf + +# Path of the fallback font. Must be a TrueType font. +# This font will be used for certain languages or if the default font is unavailable. +# type: filepath +# fallback_font_path = fonts/DroidSansFallbackFull.ttf + +# Font size of the recent chat text and chat prompt in point (pt). +# Value 0 will use the default font size. +# type: int +# chat_font_size = 0 + +# Path to save screenshots at. Can be an absolute or relative path. +# The folder will be created if it doesn't already exist. # type: path -# screenshot_path = +# screenshot_path = screenshots # Format of screenshots. -# type: enum values: png, jpg, bmp, pcx, ppm, tga +# type: enum values: png, jpg # screenshot_format = png # Screenshot quality. Only used for JPEG format. @@ -1024,9 +1135,13 @@ ## Advanced # Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens. -# type: int +# type: int min: 1 # screen_dpi = 72 +# Adjust the detected display density, used for scaling UI elements. +# type: float +# display_density_factor = 1 + # Windows systems only: Start Minetest with the command line window in the background. # Contains the same information as the file debug.txt (default name). # type: bool @@ -1036,12 +1151,22 @@ # Sound # +# Enables the sound system. +# If disabled, this completely disables all sounds everywhere and the in-game +# sound controls will be non-functional. +# Changing this setting requires a restart. # type: bool # enable_sound = true +# Volume of all sounds. +# Requires the sound system to be enabled. # type: float min: 0 max: 1 # sound_volume = 0.7 +# Whether to mute sounds. You can unmute sounds at any time, unless the +# sound system is disabled (enable_sound=false). +# In-game, you can toggle the mute state with the mute key or by using the +# pause menu. # type: bool # mute_sound = false @@ -1049,6 +1174,14 @@ # Client # +# Clickable weblinks (middle-click or Ctrl+left-click) enabled in chat console output. +# type: bool +# clickable_chat_weblinks = true + +# Optional override for chat weblink color. +# type: string +# chat_weblink_color = + ## Network # Address to connect to. @@ -1062,6 +1195,13 @@ # type: int min: 1 max: 65535 # remote_port = 30000 +# Prometheus listener address. +# If Minetest is compiled with ENABLE_PROMETHEUS option enabled, +# enable metrics listener for Prometheus on that address. +# Metrics can be fetched on http://127.0.0.1:30000/metrics +# type: string +# prometheus_listener_address = 127.0.0.1:30000 + # Save the map received by the client on disk. # type: bool # enable_local_map_saving = false @@ -1084,7 +1224,7 @@ # File in client/serverlist/ that contains your favorite servers displayed in the # Multiplayer Tab. # type: string -# serverlist_file = favoriteservers.txt +# serverlist_file = favoriteservers.json # Maximum size of the out chat queue. # 0 to disable queueing and -1 to make the queue size unlimited. @@ -1105,7 +1245,7 @@ # Maximum number of mapblocks for client to be kept in memory. # Set to -1 for unlimited amount. # type: int -# client_mapblock_limit = 5000 +# client_mapblock_limit = 7500 # Whether to show the client debug info (has the same effect as hitting F5). # type: bool @@ -1170,6 +1310,7 @@ # Enable/disable running an IPv6 server. # Ignored if bind_address is set. +# Needs enable_ipv6 to be enabled. # type: bool # ipv6_server = false @@ -1192,6 +1333,13 @@ # type: int # max_packets_per_iteration = 1024 +# Compression level to use when sending mapblocks to the client. +# -1 - use default compression level +# 0 - least compression, fastest +# 9 - best compression, slowest +# type: int min: -1 max: 9 +# map_compression_level_net = -1 + ## Game # Default game when creating a new world. @@ -1217,11 +1365,16 @@ # type: int # item_entity_ttl = 900 +# Specifies the default stack size of nodes, items and tools. +# Note that mods or games may explicitly set a stack for certain (or all) items. +# type: int +# default_stack_max = 99 + # Enable players getting damage and dying. # type: bool # enable_damage = false -# Enable creative mode for new created maps. +# Enable creative mode for all players # type: bool # creative_mode = false @@ -1277,6 +1430,16 @@ # type: bool # enable_rollback_recording = false +# Format of player chat messages. The following strings are valid placeholders: +# @name, @message, @timestamp (optional) +# type: string +# chat_message_format = <@name> @message + +# If the execution of a chat command takes longer than this specified time in +# seconds, add the time information to the chat command message +# type: float +# chatcommand_msg_time_threshold = 0.1 + # A message to be displayed to all clients when the server shuts down. # type: string # kick_msg_shutdown = Server shutting down. @@ -1291,24 +1454,24 @@ # ask_reconnect_on_crash = false # From how far clients know about objects, stated in mapblocks (16 nodes). -# +# # Setting this larger than active_block_range will also cause the server # to maintain active objects up to this distance in the direction the # player is looking. (This can avoid mobs suddenly disappearing from view) # type: int -# active_object_send_range_blocks = 4 +# active_object_send_range_blocks = 8 # The radius of the volume of blocks around every player that is subject to the # active block stuff, stated in mapblocks (16 nodes). # In active blocks objects are loaded and ABMs run. # This is also the minimum range in which active objects (mobs) are maintained. -# This should be configured together with active_object_range. +# This should be configured together with active_object_send_range_blocks. # type: int -# active_block_range = 3 +# active_block_range = 4 # From how far blocks are sent to clients, stated in mapblocks (16 nodes). # type: int -# max_block_send_distance = 10 +# max_block_send_distance = 12 # Maximum number of forceloaded mapblocks. # type: int @@ -1326,7 +1489,7 @@ # Time of day when a new world is started, in millihours (0-23999). # type: int min: 0 max: 23999 -# world_start_time = 5250 +# world_start_time = 6125 # Interval of saving important changes in the world, stated in seconds. # type: float @@ -1346,53 +1509,69 @@ ### Physics +# Horizontal and vertical acceleration on ground or when climbing, +# in nodes per second per second. # type: float # movement_acceleration_default = 3 +# Horizontal acceleration in air when jumping or falling, +# in nodes per second per second. # type: float # movement_acceleration_air = 2 +# Horizontal and vertical acceleration in fast mode, +# in nodes per second per second. # type: float # movement_acceleration_fast = 10 +# Walking and flying speed, in nodes per second. # type: float # movement_speed_walk = 4 +# Sneaking speed, in nodes per second. # type: float # movement_speed_crouch = 1.35 +# Walking, flying and climbing speed in fast mode, in nodes per second. # type: float # movement_speed_fast = 20 +# Vertical climbing speed, in nodes per second. # type: float # movement_speed_climb = 3 +# Initial vertical speed when jumping, in nodes per second. # type: float # movement_speed_jump = 6.5 +# Decrease this to increase liquid resistance to movement. # type: float # movement_liquid_fluidity = 1 +# Maximum liquid resistance. Controls deceleration when entering liquid at +# high speed. # type: float # movement_liquid_fluidity_smooth = 0.5 +# Controls sinking speed in liquid. # type: float # movement_liquid_sink = 10 +# Acceleration of gravity, in nodes per second per second. # type: float # movement_gravity = 9.81 ### Advanced -# Handling for deprecated lua api calls: -# - legacy: (try to) mimic old behaviour (default for release). -# - log: mimic and log backtrace of deprecated call (default for debug). +# Handling for deprecated Lua API calls: +# - none: Do not log deprecated calls +# - log: mimic and log backtrace of deprecated call (default). # - error: abort on usage of deprecated call (suggested for mod developers). -# type: enum values: legacy, log, error -# deprecated_lua_api_handling = legacy +# type: enum values: none, log, error +# deprecated_lua_api_handling = log # Number of extra blocks that can be loaded by /clearobjects at once. -# This is a trade-off between sqlite transaction overhead and +# This is a trade-off between SQLite transaction overhead and # memory consumption (4096=100MB, as a rule of thumb). # type: int # max_clearobjects_extra_loaded_blocks = 4096 @@ -1404,12 +1583,19 @@ # Maximum number of statically stored objects in a block. # type: int -# max_objects_per_block = 64 +# max_objects_per_block = 256 # See https://www.sqlite.org/pragma.html#pragma_synchronous # type: enum values: 0, 1, 2 # sqlite_synchronous = 2 +# Compression level to use when saving mapblocks to disk. +# -1 - use default compression level +# 0 - least compression, fastest +# 9 - best compression, slowest +# type: int min: -1 max: 9 +# map_compression_level_disk = -1 + # Length of a server tick and the interval at which objects are generally updated over # network. # type: float @@ -1423,6 +1609,11 @@ # type: float # abm_interval = 1.0 +# The time budget allowed for ABMs to execute on each step +# (as a fraction of the ABM Interval) +# type: float min: 0.1 max: 0.9 +# abm_time_budget = 0.2 + # Length of time between NodeTimer execution cycles # type: float # nodetimer_interval = 0.2 @@ -1531,7 +1722,7 @@ # type: bool # instrument.lbm = true -# Instrument chatcommands on registration. +# Instrument chat commands on registration. # type: bool # instrument.chatcommand = true @@ -1566,7 +1757,7 @@ # Set the language. Leave empty to use the system language. # A restart is required after changing this. -# type: enum values: , be, ca, cs, da, de, dv, en, eo, es, et, fr, he, hu, id, it, ja, jbo, ko, ky, lt, ms, nb, nl, pl, pt, pt_BR, ro, ru, sl, sr_Cyrl, sv, sw, tr, uk, zh_CN, zh_TW +# type: enum values: , be, bg, ca, cs, da, de, el, en, eo, es, et, eu, fi, fr, gd, gl, hu, id, it, ja, jbo, kk, ko, lt, lv, ms, nb, nl, nn, pl, pt, pt_BR, ro, ru, sk, sl, sr_Cyrl, sr_Latn, sv, sw, tr, uk, vi, zh_CN, zh_TW # language = # Level of logging to be written to debug.txt: @@ -1577,19 +1768,31 @@ # - action # - info # - verbose -# type: enum values: , none, error, warning, action, info, verbose +# - trace +# type: enum values: , none, error, warning, action, info, verbose, trace # debug_log_level = action -# IPv6 support. +# If the file size of debug.txt exceeds the number of megabytes specified in +# this setting when it is opened, the file is moved to debug.txt.1, +# deleting an older debug.txt.1 if it exists. +# debug.txt is only moved if this setting is positive. +# type: int +# debug_log_size_max = 50 + +# Minimal level of logging to be written to chat. +# type: enum values: , none, error, warning, action, info, verbose, trace +# chat_log_level = error + +# Enable IPv6 support (for both client and server). +# Required for IPv6 connections to work at all. # type: bool # enable_ipv6 = true ## Advanced -# Default timeout for cURL, stated in milliseconds. -# Only has an effect if compiled with cURL. +# Maximum time an interactive request (e.g. server list fetch) may take, stated in milliseconds. # type: int -# curl_timeout = 5000 +# curl_timeout = 20000 # Limits number of parallel HTTP requests. Affects: # - Media fetch if server uses remote_media setting. @@ -1599,21 +1802,10 @@ # type: int # curl_parallel_limit = 8 -# Maximum time in ms a file download (e.g. a mod download) may take. +# Maximum time a file download (e.g. a mod download) may take, stated in milliseconds. # type: int # curl_file_download_timeout = 300000 -# Makes DirectX work with LuaJIT. Disable if it causes troubles. -# type: bool -# high_precision_fpu = true - -# Changes the main menu UI: -# - Full: Multiple singleplayer worlds, game choice, texture pack chooser, etc. -# - Simple: One singleplayer world, no game or texture pack choosers. May be -# necessary for smaller screens. -# type: enum values: full, simple -# main_menu_style = full - # Replaces the default main menu with a custom one. # type: string # main_menu_script = @@ -1629,11 +1821,9 @@ # Name of map generator to be used when creating a new world. # Creating a world in the main menu will override this. -# Current stable mapgens: -# v5, v6, v7 (except floatlands), singlenode. -# 'stable' means the terrain shape in an existing world will not be changed -# in the future. Note that biomes are defined by games and may still change. -# type: enum values: v5, v6, v7, valleys, carpathian, fractal, flat, singlenode +# Current mapgens in a highly unstable state: +# - The optional floatlands of v7 (disabled by default). +# type: enum values: v7, valleys, carpathian, v5, flat, fractal, singlenode, v6 # mg_name = v7 # Water surface level of the world. @@ -1642,23 +1832,19 @@ # From how far blocks are generated for clients, stated in mapblocks (16 nodes). # type: int -# max_block_generate_distance = 8 +# max_block_generate_distance = 10 # Limit of map generation, in nodes, in all 6 directions from (0, 0, 0). # Only mapchunks completely within the mapgen limit are generated. # Value is stored per-world. -# type: int min: 0 max: 31000 -# mapgen_limit = 31000 +# type: int min: 0 max: 31007 +# mapgen_limit = 31007 # Global map generation attributes. # In Mapgen v6 the 'decorations' flag controls all decorations except trees -# and junglegrass, in all other mapgens this flag controls all decorations. -# type: flags possible values: caves, dungeons, light, decorations, biomes, nocaves, nodungeons, nolight, nodecorations, nobiomes -# mg_flags = caves,dungeons,light,decorations,biomes - -# Whether dungeons occasionally project from the terrain. -# type: bool -# projecting_dungeons = true +# and jungle grass, in all other mapgens this flag controls all decorations. +# type: flags possible values: caves, dungeons, light, decorations, biomes, ores, nocaves, nodungeons, nolight, nodecorations, nobiomes, noores +# mg_flags = caves,dungeons,light,decorations,biomes,ores ## Biome API temperature and humidity noise parameters @@ -1721,6 +1907,8 @@ # mgv5_spflags = caverns # Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float # mgv5_cave_width = 0.09 @@ -1728,9 +1916,25 @@ # type: int # mgv5_large_cave_depth = -256 -# Y of upper limit of lava in large caves. -# type: int -# mgv5_lava_depth = -256 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgv5_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgv5_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgv5_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgv5_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgv5_large_cave_flooded = 0.5 # Y-level of cavern upper limit. # type: int @@ -1804,7 +2008,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -1817,7 +2021,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # 3D noise defining giant caverns. @@ -1830,7 +2034,7 @@ # octaves = 5, # persistence = 0.63, # lacunarity = 2.0, -# flags = +# flags = # } # 3D noise defining terrain. @@ -1846,17 +2050,30 @@ # flags = eased # } +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgv5_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = +# } + ## Mapgen V6 # Map generation attributes specific to Mapgen v6. # The 'snowbiomes' flag enables the new 5 biome system. -# When the new biome system is enabled jungles are automatically enabled and +# When the 'snowbiomes' flag is enabled jungles are automatically enabled and # the 'jungles' flag is ignored. # type: flags possible values: jungles, biomeblend, mudflow, snowbiomes, flat, trees, nojungles, nobiomeblend, nomudflow, nosnowbiomes, noflat, notrees -# mgv6_spflags = jungles,biomeblend,mudflow,snowbiomes,trees +# mgv6_spflags = jungles,biomeblend,mudflow,snowbiomes,noflat,trees # Deserts occur when np_biome exceeds this value. -# When the new biome system is enabled, this is ignored. +# When the 'snowbiomes' flag is enabled, this is ignored. # type: float # mgv6_freq_desert = 0.45 @@ -2020,7 +2237,9 @@ ## Mapgen V7 # Map generation attributes specific to Mapgen v7. -# 'ridges' enables the rivers. +# 'ridges': Rivers. +# 'floatlands': Floating land masses in the atmosphere. +# 'caverns': Giant caves deep underground. # type: flags possible values: mountains, ridges, floatlands, caverns, nomountains, noridges, nofloatlands, nocaverns # mgv7_spflags = mountains,ridges,nofloatlands,caverns @@ -2028,38 +2247,80 @@ # type: int # mgv7_mount_zero_level = 0 -# Controls width of tunnels, a smaller value creates wider tunnels. -# type: float -# mgv7_cave_width = 0.09 +# Lower Y limit of floatlands. +# type: int +# mgv7_floatland_ymin = 1024 -# Y of upper limit of large caves. +# Upper Y limit of floatlands. # type: int -# mgv7_large_cave_depth = -33 +# mgv7_floatland_ymax = 4096 -# Y of upper limit of lava in large caves. +# Y-distance over which floatlands taper from full density to nothing. +# Tapering starts at this distance from the Y limit. +# For a solid floatland layer, this controls the height of hills/mountains. +# Must be less than or equal to half the distance between the Y limits. # type: int -# mgv7_lava_depth = -256 +# mgv7_floatland_taper = 256 -# Controls the density of mountain-type floatlands. -# Is a noise offset added to the 'mgv7_np_mountain' noise value. +# Exponent of the floatland tapering. Alters the tapering behaviour. +# Value = 1.0 creates a uniform, linear tapering. +# Values > 1.0 create a smooth tapering suitable for the default separated +# floatlands. +# Values < 1.0 (for example 0.25) create a more defined surface level with +# flatter lowlands, suitable for a solid floatland layer. # type: float -# mgv7_float_mount_density = 0.6 +# mgv7_float_taper_exp = 2.0 -# Typical maximum height, above and below midpoint, of floatland mountains. +# Adjusts the density of the floatland layer. +# Increase value to increase density. Can be positive or negative. +# Value = 0.0: 50% of volume is floatland. +# Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test +# to be sure) creates a solid floatland layer. # type: float -# mgv7_float_mount_height = 128.0 +# mgv7_floatland_density = -0.6 + +# Surface level of optional water placed on a solid floatland layer. +# Water is disabled by default and will only be placed if this value is set +# to above 'mgv7_floatland_ymax' - 'mgv7_floatland_taper' (the start of the +# upper tapering). +# ***WARNING, POTENTIAL DANGER TO WORLDS AND SERVER PERFORMANCE***: +# When enabling water placement the floatlands must be configured and tested +# to be a solid layer by setting 'mgv7_floatland_density' to 2.0 (or other +# required value depending on 'mgv7_np_floatland'), to avoid +# server-intensive extreme water flow and to avoid vast flooding of the +# world surface below. +# type: int +# mgv7_floatland_ywater = -31000 -# Alters how mountain-type floatlands taper above and below midpoint. +# Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float -# mgv7_float_mount_exponent = 0.75 +# mgv7_cave_width = 0.09 -# Y-level of floatland midpoint and lake surface. +# Y of upper limit of large caves. # type: int -# mgv7_floatland_level = 1280 +# mgv7_large_cave_depth = -33 -# Y-level to which floatland shadows extend. -# type: int -# mgv7_shadow_limit = 1024 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgv7_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgv7_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgv7_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgv7_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgv7_large_cave_flooded = 0.5 # Y-level of cavern upper limit. # type: int @@ -2175,33 +2436,6 @@ # flags = eased # } -# Defines areas of floatland smooth terrain. -# Smooth floatlands occur when noise > 0. -# type: noise_params_2d -# mgv7_np_floatland_base = { -# offset = -0.6, -# scale = 1.5, -# spread = (600, 600, 600), -# seed = 114, -# octaves = 5, -# persistence = 0.6, -# lacunarity = 2.0, -# flags = eased -# } - -# Variation of hill height and lake depth on floatland smooth terrain. -# type: noise_params_2d -# mgv7_np_float_base_height = { -# offset = 48, -# scale = 24, -# spread = (300, 300, 300), -# seed = 907, -# octaves = 4, -# persistence = 0.7, -# lacunarity = 2.0, -# flags = eased -# } - # 3D noise defining mountain structure and height. # Also defines structure of floatland mountain terrain. # type: noise_params_3d @@ -2213,7 +2447,7 @@ # octaves = 5, # persistence = 0.63, # lacunarity = 2.0, -# flags = +# flags = # } # 3D noise defining structure of river canyon walls. @@ -2226,7 +2460,23 @@ # octaves = 4, # persistence = 0.75, # lacunarity = 2.0, -# flags = +# flags = +# } + +# 3D noise defining structure of floatlands. +# If altered from the default, the noise 'scale' (0.7 by default) may need +# to be adjusted, as floatland tapering functions best when this noise has +# a value range of approximately -2.0 to 2.0. +# type: noise_params_3d +# mgv7_np_floatland = { +# offset = 0, +# scale = 0.7, +# spread = (384, 96, 384), +# seed = 1009, +# octaves = 4, +# persistence = 0.75, +# lacunarity = 1.618, +# flags = # } # 3D noise defining giant caverns. @@ -2239,7 +2489,7 @@ # octaves = 5, # persistence = 0.63, # lacunarity = 2.0, -# flags = +# flags = # } # First of two 3D noises that together define tunnels. @@ -2252,7 +2502,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -2265,20 +2515,47 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = +# } + +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgv7_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = # } ## Mapgen Carpathian # Map generation attributes specific to Mapgen Carpathian. -# type: flags possible values: caverns, nocaverns -# mgcarpathian_spflags = caverns +# type: flags possible values: caverns, rivers, nocaverns, norivers +# mgcarpathian_spflags = caverns,norivers # Defines the base ground level. # type: float # mgcarpathian_base_level = 12.0 +# Defines the width of the river channel. +# type: float +# mgcarpathian_river_width = 0.05 + +# Defines the depth of the river channel. +# type: float +# mgcarpathian_river_depth = 24.0 + +# Defines the width of the river valley. +# type: float +# mgcarpathian_valley_width = 0.25 + # Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float # mgcarpathian_cave_width = 0.09 @@ -2286,9 +2563,25 @@ # type: int # mgcarpathian_large_cave_depth = -33 -# Y of upper limit of lava in large caves. -# type: int -# mgcarpathian_lava_depth = -256 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgcarpathian_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgcarpathian_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgcarpathian_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgcarpathian_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgcarpathian_large_cave_flooded = 0.5 # Y-level of cavern upper limit. # type: int @@ -2455,6 +2748,19 @@ # flags = eased # } +# 2D noise that locates the river valleys and channels. +# type: noise_params_2d +# mgcarpathian_np_rivers = { +# offset = 0, +# scale = 1, +# spread = (1000, 1000, 1000), +# seed = 85039, +# octaves = 5, +# persistence = 0.6, +# lacunarity = 2.0, +# flags = eased +# } + # 3D noise for mountain overhangs, cliffs, etc. Usually small variations. # type: noise_params_3d # mgcarpathian_np_mnt_var = { @@ -2465,7 +2771,7 @@ # octaves = 5, # persistence = 0.55, # lacunarity = 2.0, -# flags = +# flags = # } # First of two 3D noises that together define tunnels. @@ -2478,7 +2784,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -2491,7 +2797,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # 3D noise defining giant caverns. @@ -2504,15 +2810,28 @@ # octaves = 5, # persistence = 0.63, # lacunarity = 2.0, -# flags = +# flags = +# } + +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgcarpathian_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = # } ## Mapgen Flat -# Map generation attributes specific to Mapgen flat. +# Map generation attributes specific to Mapgen Flat. # Occasional lakes and hills can be added to the flat world. -# type: flags possible values: lakes, hills, nolakes, nohills -# mgflat_spflags = nolakes,nohills +# type: flags possible values: lakes, hills, caverns, nolakes, nohills, nocaverns +# mgflat_spflags = nolakes,nohills,nocaverns # Y of flat ground. # type: int @@ -2522,11 +2841,29 @@ # type: int # mgflat_large_cave_depth = -33 -# Y of upper limit of lava in large caves. -# type: int -# mgflat_lava_depth = -256 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgflat_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgflat_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgflat_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgflat_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgflat_large_cave_flooded = 0.5 # Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float # mgflat_cave_width = 0.09 @@ -2550,6 +2887,18 @@ # type: float # mgflat_hill_steepness = 64.0 +# Y-level of cavern upper limit. +# type: int +# mgflat_cavern_limit = -256 + +# Y-distance over which caverns expand to full size. +# type: int +# mgflat_cavern_taper = 256 + +# Defines full size of caverns, smaller values create larger caverns. +# type: float +# mgflat_cavern_threshold = 0.7 + # Lower Y limit of dungeons. # type: int # mgflat_dungeon_ymin = -31000 @@ -2596,7 +2945,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -2609,12 +2958,46 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = +# } + +# 3D noise defining giant caverns. +# type: noise_params_3d +# mgflat_np_cavern = { +# offset = 0, +# scale = 1, +# spread = (384, 128, 384), +# seed = 723, +# octaves = 5, +# persistence = 0.63, +# lacunarity = 2.0, +# flags = +# } + +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgflat_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = # } ## Mapgen Fractal +# Map generation attributes specific to Mapgen Fractal. +# 'terrain' enables the generation of non-fractal terrain: +# ocean, islands and underground. +# type: flags possible values: terrain, noterrain +# mgfractal_spflags = terrain + # Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float # mgfractal_cave_width = 0.09 @@ -2622,9 +3005,25 @@ # type: int # mgfractal_large_cave_depth = -33 -# Y of upper limit of lava in large caves. -# type: int -# mgfractal_lava_depth = -256 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgfractal_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgfractal_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgfractal_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgfractal_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgfractal_large_cave_flooded = 0.5 # Lower Y limit of dungeons. # type: int @@ -2635,24 +3034,24 @@ # mgfractal_dungeon_ymax = 31000 # Selects one of 18 fractal types. -# 1 = 4D "Roundy" mandelbrot set. -# 2 = 4D "Roundy" julia set. -# 3 = 4D "Squarry" mandelbrot set. -# 4 = 4D "Squarry" julia set. -# 5 = 4D "Mandy Cousin" mandelbrot set. -# 6 = 4D "Mandy Cousin" julia set. -# 7 = 4D "Variation" mandelbrot set. -# 8 = 4D "Variation" julia set. -# 9 = 3D "Mandelbrot/Mandelbar" mandelbrot set. -# 10 = 3D "Mandelbrot/Mandelbar" julia set. -# 11 = 3D "Christmas Tree" mandelbrot set. -# 12 = 3D "Christmas Tree" julia set. -# 13 = 3D "Mandelbulb" mandelbrot set. -# 14 = 3D "Mandelbulb" julia set. -# 15 = 3D "Cosine Mandelbulb" mandelbrot set. -# 16 = 3D "Cosine Mandelbulb" julia set. -# 17 = 4D "Mandelbulb" mandelbrot set. -# 18 = 4D "Mandelbulb" julia set. +# 1 = 4D "Roundy" Mandelbrot set. +# 2 = 4D "Roundy" Julia set. +# 3 = 4D "Squarry" Mandelbrot set. +# 4 = 4D "Squarry" Julia set. +# 5 = 4D "Mandy Cousin" Mandelbrot set. +# 6 = 4D "Mandy Cousin" Julia set. +# 7 = 4D "Variation" Mandelbrot set. +# 8 = 4D "Variation" Julia set. +# 9 = 3D "Mandelbrot/Mandelbar" Mandelbrot set. +# 10 = 3D "Mandelbrot/Mandelbar" Julia set. +# 11 = 3D "Christmas Tree" Mandelbrot set. +# 12 = 3D "Christmas Tree" Julia set. +# 13 = 3D "Mandelbulb" Mandelbrot set. +# 14 = 3D "Mandelbulb" Julia set. +# 15 = 3D "Cosine Mandelbulb" Mandelbrot set. +# 16 = 3D "Cosine Mandelbulb" Julia set. +# 17 = 4D "Mandelbulb" Mandelbrot set. +# 18 = 4D "Mandelbulb" Julia set. # type: int min: 1 max: 18 # mgfractal_fractal = 1 @@ -2677,7 +3076,7 @@ # Can be used to move a desired point to (0, 0) to create a # suitable spawn point, or to allow 'zooming in' on a desired # point by increasing 'scale'. -# The default is tuned for a suitable spawn point for mandelbrot +# The default is tuned for a suitable spawn point for Mandelbrot # sets with default parameters, it may need altering in other # situations. # Range roughly -2 to 2. Multiply by 'scale' for offset in nodes. @@ -2759,7 +3158,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -2772,7 +3171,20 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = +# } + +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgfractal_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = # } ## Mapgen Valleys @@ -2783,7 +3195,7 @@ # 'vary_river_depth': If enabled, low humidity and high heat causes rivers # to become shallower and occasionally dry. # 'altitude_dry': Reduces humidity with altitude. -# type: flags possible values: altitude_chill, noaltitude_chill, humid_rivers, nohumid_rivers, vary_river_depth, novary_river_depth, altitude_dry, noaltitude_dry +# type: flags possible values: altitude_chill, humid_rivers, vary_river_depth, altitude_dry, noaltitude_chill, nohumid_rivers, novary_river_depth, noaltitude_dry # mgvalleys_spflags = altitude_chill,humid_rivers,vary_river_depth,altitude_dry # The vertical distance over which heat drops by 20 if 'altitude_chill' is @@ -2796,9 +3208,25 @@ # type: int # mgvalleys_large_cave_depth = -33 -# Y of upper limit of lava in large caves. -# type: int -# mgvalleys_lava_depth = 1 +# Minimum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgvalleys_small_cave_num_min = 0 + +# Maximum limit of random number of small caves per mapchunk. +# type: int min: 0 max: 256 +# mgvalleys_small_cave_num_max = 0 + +# Minimum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgvalleys_large_cave_num_min = 0 + +# Maximum limit of random number of large caves per mapchunk. +# type: int min: 0 max: 64 +# mgvalleys_large_cave_num_max = 2 + +# Proportion of large caves that contain liquid. +# type: float min: 0 max: 1 +# mgvalleys_large_cave_flooded = 0.5 # Depth below which you'll find giant caverns. # type: int @@ -2821,6 +3249,8 @@ # mgvalleys_river_size = 5 # Controls width of tunnels, a smaller value creates wider tunnels. +# Value >= 10.0 completely disables generation of tunnels and avoids the +# intensive noise calculations. # type: float # mgvalleys_cave_width = 0.09 @@ -2844,7 +3274,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # Second of two 3D noises that together define tunnels. @@ -2857,7 +3287,7 @@ # octaves = 3, # persistence = 0.5, # lacunarity = 2.0, -# flags = +# flags = # } # The depth of dirt or other biome filler node. @@ -2883,7 +3313,7 @@ # octaves = 6, # persistence = 0.63, # lacunarity = 2.0, -# flags = +# flags = # } # Defines large-scale river channel structure. @@ -2935,7 +3365,7 @@ # octaves = 6, # persistence = 0.8, # lacunarity = 2.0, -# flags = +# flags = # } # Amplifies the valleys. @@ -2964,6 +3394,19 @@ # flags = eased # } +# 3D noise that determines number of dungeons per mapchunk. +# type: noise_params_3d +# mgvalleys_np_dungeons = { +# offset = 0.9, +# scale = 0.5, +# spread = (500, 500, 500), +# seed = 0, +# octaves = 2, +# persistence = 0.8, +# lacunarity = 2.0, +# flags = +# } + ## Advanced # Size of mapchunks generated by mapgen, stated in mapblocks (16 nodes). @@ -2980,32 +3423,31 @@ # enable_mapgen_debug_info = false # Maximum number of blocks that can be queued for loading. -# type: int -# emergequeue_limit_total = 512 +# type: int min: 1 max: 1000000 +# emergequeue_limit_total = 1024 # Maximum number of blocks to be queued that are to be loaded from file. -# Set to blank for an appropriate amount to be chosen automatically. -# type: int -# emergequeue_limit_diskonly = 64 +# This limit is enforced per player. +# type: int min: 1 max: 1000000 +# emergequeue_limit_diskonly = 128 # Maximum number of blocks to be queued that are to be generated. -# Set to blank for an appropriate amount to be chosen automatically. -# type: int -# emergequeue_limit_generate = 64 +# This limit is enforced per player. +# type: int min: 1 max: 1000000 +# emergequeue_limit_generate = 128 # Number of emerge threads to use. -# Empty or 0 value: +# Value 0: # - Automatic selection. The number of emerge threads will be # - 'number of processors - 2', with a lower limit of 1. # Any other value: # - Specifies the number of emerge threads, with a lower limit of 1. -# Warning: Increasing the number of emerge threads increases engine mapgen +# WARNING: Increasing the number of emerge threads increases engine mapgen # speed, but this may harm game performance by interfering with other # processes, especially in singleplayer and/or when running Lua code in -# 'on_generated'. -# For many users the optimum setting may be '1'. +# 'on_generated'. For many users the optimum setting may be '1'. # type: int -# num_emerge_threads = 0 +# num_emerge_threads = 1 # # Online Content Repository @@ -3024,3 +3466,8 @@ # type: string # contentdb_flag_blacklist = nonfree, desktop_default +# Maximum number of concurrent downloads. Downloads exceeding this limit will be queued. +# This should be lower than curl_parallel_limit. +# type: int +# contentdb_max_concurrent_downloads = 3 +