struct internal_state;
typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
+ z_const Bytef *next_in; /* next input byte */
uInt avail_in; /* number of bytes available at next_in */
uLong total_in; /* total number of input bytes read so far */
uInt avail_out; /* remaining free space at next_out */
uLong total_out; /* total number of bytes output so far */
- char *msg; /* last error message, NULL if no error */
+ z_const char *msg; /* last error message, NULL if no error */
struct internal_state FAR *state; /* not visible by applications */
alloc_func zalloc; /* used to allocate the internal state */
be larger than the value returned by deflateBound() if flush options other
than Z_FINISH or Z_NO_FLUSH are used.
*/
-
+
ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
unsigned *pending,
int *bits));
provided would be due to the available output space having being consumed.
The number of bits of output not provided are between 0 and 7, where they
await more bits to join them in order to fill out a full byte.
-
+
deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
27-31: 0 (reserved)
*/
+#ifndef Z_SOLO
/* utility functions */
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
+ the case where there is not enough room, uncompress() will fill the output
+ buffer with the uncompressed data up to that point.
*/
-
/* gzip file access functions */
/*
a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
for fixed code compression as in "wb9F". (See the description of
- deflateInit2 for more information about the strategy parameter.) Also "a"
- can be used instead of "w" to request that the gzip stream that will be
- written be appended to the file. "+" will result in an error, since reading
- and writing to the same gzip file is not supported.
+ deflateInit2 for more information about the strategy parameter.) 'T' will
+ request transparent writing or appending with no compression and not using
+ the gzip format.
+
+ "a" can be used instead of "w" to request that the gzip stream that will
+ be written be appended to the file. "+" will result in an error, since
+ reading and writing to the same gzip file is not supported.
+
+ These functions, as well as gzip, will read and decode a sequence of gzip
+ streams in a file. The append function of gzopen() can be used to create
+ such a file. (Also see gzflush() for another way to do this.) When
+ appending, gzopen does not test whether the file begins with a gzip stream,
+ nor does it look for the end of the gzip streams to begin appending. gzopen
+ will simply append a gzip stream to the existing file.
gzopen can be used to read a file which is not in gzip format; in this
- case gzread will directly read from the file without decompression.
+ case gzread will directly read from the file without decompression. When
+ reading, this will be detected automatically by looking for the magic two-
+ byte gzip header.
gzopen returns NULL if the file could not be opened, if there was
insufficient memory to allocate the gzFile state, or if an invalid mode was
descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
mode);. The duplicated descriptor should be saved to avoid a leak, since
- gzdopen does not close fd if it fails.
+ gzdopen does not close fd if it fails. If you are using fileno() to get the
+ file descriptor from a FILE *, then you will have to use dup() to avoid
+ double-close()ing the file descriptor. Both gzclose() and fclose() will
+ close the associated file descriptor, so they need to have different file
+ descriptors.
gzdopen returns NULL if there was insufficient memory to allocate the
gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
error.
*/
-ZEXTERN int ZEXPORTVA gzprintf ON((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
/*
Converts, formats, and writes the arguments to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
Returns true (1) if file is being copied directly while reading, or false
- (0) if file is a gzip stream being decompressed. This state can change from
- false to true while reading the input file if the end of a gzip stream is
- reached, but is followed by data that is not another gzip stream.
+ (0) if file is a gzip stream being decompressed.
If the input file is empty, gzdirect() will return true, since the input
does not contain a gzip stream.
cause buffers to be allocated to allow reading the file to determine if it
is a gzip file. Therefore if gzbuffer() is used, it should be called before
gzdirect().
+
+ When writing, gzdirect() returns true (1) if transparent writing was
+ requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
+ gzdirect() is not needed when writing. Transparent writing must be
+ explicitly requested, so the application already knows the answer. When
+ linking statically, using gzdirect() will include all of the zlib code for
+ gzip file reading and decompression, which may not be desired.)
*/
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
must not be called more than once on the same allocation.
gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
- file operation error, or Z_OK on success.
+ file operation error, Z_MEM_ERROR if out of memory, or Z_OK on success.
*/
ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
file that is being written concurrently.
*/
+#endif /* !Z_SOLO */
/* checksum functions */
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, (int)sizeof(z_stream))
+#ifndef Z_SOLO
+
/* gzgetc() macro and its supporting function and exposed data structure. Note
* that the real internal state is much larger than the exposed structure.
* This abbreviated structure exposes just enough for the gzgetc() macro. The
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif
+#else /* Z_SOLO */
+
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
/* hack for buggy compilers */
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;};
ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
+#ifndef Z_SOLO
+ ZEXTERN unsigned long ZEXPORT gzflags OF((void));
+#endif
#ifdef __cplusplus
}