/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
-** version 3.9.0. By combining all the individual C code files into this
+** version 3.23.0. By combining all the individual C code files into this
** single large file, the entire code can be compiled as a single translation
** unit. This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately. Performance improvements
**
** This file is all you need to compile SQLite. To use SQLite in other
** programs, you need this file and the "sqlite3.h" header file that defines
-** the programming interface to the SQLite library. (If you do not have
+** the programming interface to the SQLite library. (If you do not have
** the "sqlite3.h" header file at hand, you will find a copy embedded within
** the text of this file. Search for "Begin file sqlite3.h" to find the start
** of the embedded sqlite3.h header file.) Additional code files may be needed
#ifndef SQLITE_PRIVATE
# define SQLITE_PRIVATE static
#endif
+/************** Begin file ctime.c *******************************************/
+/*
+** 2010 February 23
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+**
+** This file implements routines used to report what compile-time options
+** SQLite was built with.
+*/
+
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+
+/*
+** Include the configuration header output by 'configure' if we're using the
+** autoconf-based build
+*/
+#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
+#include "config.h"
+#define SQLITECONFIG_H 1
+#endif
+
+/* These macros are provided to "stringify" the value of the define
+** for those options in which the value is meaningful. */
+#define CTIMEOPT_VAL_(opt) #opt
+#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)
+
+/*
+** An array of names of all compile-time options. This array should
+** be sorted A-Z.
+**
+** This array looks large, but in a typical installation actually uses
+** only a handful of compile-time options, so most times this array is usually
+** rather short and uses little memory space.
+*/
+static const char * const sqlite3azCompileOpt[] = {
+
+/*
+** BEGIN CODE GENERATED BY tool/mkctime.tcl
+*/
+#if SQLITE_32BIT_ROWID
+ "32BIT_ROWID",
+#endif
+#if SQLITE_4_BYTE_ALIGNED_MALLOC
+ "4_BYTE_ALIGNED_MALLOC",
+#endif
+#if SQLITE_64BIT_STATS
+ "64BIT_STATS",
+#endif
+#if SQLITE_ALLOW_COVERING_INDEX_SCAN
+ "ALLOW_COVERING_INDEX_SCAN",
+#endif
+#if SQLITE_ALLOW_URI_AUTHORITY
+ "ALLOW_URI_AUTHORITY",
+#endif
+#ifdef SQLITE_BITMASK_TYPE
+ "BITMASK_TYPE=" CTIMEOPT_VAL(SQLITE_BITMASK_TYPE),
+#endif
+#if SQLITE_BUG_COMPATIBLE_20160819
+ "BUG_COMPATIBLE_20160819",
+#endif
+#if SQLITE_CASE_SENSITIVE_LIKE
+ "CASE_SENSITIVE_LIKE",
+#endif
+#if SQLITE_CHECK_PAGES
+ "CHECK_PAGES",
+#endif
+#if defined(__clang__) && defined(__clang_major__)
+ "COMPILER=clang-" CTIMEOPT_VAL(__clang_major__) "."
+ CTIMEOPT_VAL(__clang_minor__) "."
+ CTIMEOPT_VAL(__clang_patchlevel__),
+#elif defined(_MSC_VER)
+ "COMPILER=msvc-" CTIMEOPT_VAL(_MSC_VER),
+#elif defined(__GNUC__) && defined(__VERSION__)
+ "COMPILER=gcc-" __VERSION__,
+#endif
+#if SQLITE_COVERAGE_TEST
+ "COVERAGE_TEST",
+#endif
+#if SQLITE_DEBUG
+ "DEBUG",
+#endif
+#if SQLITE_DEFAULT_AUTOMATIC_INDEX
+ "DEFAULT_AUTOMATIC_INDEX",
+#endif
+#if SQLITE_DEFAULT_AUTOVACUUM
+ "DEFAULT_AUTOVACUUM",
+#endif
+#ifdef SQLITE_DEFAULT_CACHE_SIZE
+ "DEFAULT_CACHE_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_CACHE_SIZE),
+#endif
+#if SQLITE_DEFAULT_CKPTFULLFSYNC
+ "DEFAULT_CKPTFULLFSYNC",
+#endif
+#ifdef SQLITE_DEFAULT_FILE_FORMAT
+ "DEFAULT_FILE_FORMAT=" CTIMEOPT_VAL(SQLITE_DEFAULT_FILE_FORMAT),
+#endif
+#ifdef SQLITE_DEFAULT_FILE_PERMISSIONS
+ "DEFAULT_FILE_PERMISSIONS=" CTIMEOPT_VAL(SQLITE_DEFAULT_FILE_PERMISSIONS),
+#endif
+#if SQLITE_DEFAULT_FOREIGN_KEYS
+ "DEFAULT_FOREIGN_KEYS",
+#endif
+#ifdef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT
+ "DEFAULT_JOURNAL_SIZE_LIMIT=" CTIMEOPT_VAL(SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT),
+#endif
+#ifdef SQLITE_DEFAULT_LOCKING_MODE
+ "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE),
+#endif
+#ifdef SQLITE_DEFAULT_LOOKASIDE
+ "DEFAULT_LOOKASIDE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOOKASIDE),
+#endif
+#if SQLITE_DEFAULT_MEMSTATUS
+ "DEFAULT_MEMSTATUS",
+#endif
+#ifdef SQLITE_DEFAULT_MMAP_SIZE
+ "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE),
+#endif
+#ifdef SQLITE_DEFAULT_PAGE_SIZE
+ "DEFAULT_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_PAGE_SIZE),
+#endif
+#ifdef SQLITE_DEFAULT_PCACHE_INITSZ
+ "DEFAULT_PCACHE_INITSZ=" CTIMEOPT_VAL(SQLITE_DEFAULT_PCACHE_INITSZ),
+#endif
+#ifdef SQLITE_DEFAULT_PROXYDIR_PERMISSIONS
+ "DEFAULT_PROXYDIR_PERMISSIONS=" CTIMEOPT_VAL(SQLITE_DEFAULT_PROXYDIR_PERMISSIONS),
+#endif
+#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS
+ "DEFAULT_RECURSIVE_TRIGGERS",
+#endif
+#ifdef SQLITE_DEFAULT_ROWEST
+ "DEFAULT_ROWEST=" CTIMEOPT_VAL(SQLITE_DEFAULT_ROWEST),
+#endif
+#ifdef SQLITE_DEFAULT_SECTOR_SIZE
+ "DEFAULT_SECTOR_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_SECTOR_SIZE),
+#endif
+#ifdef SQLITE_DEFAULT_SYNCHRONOUS
+ "DEFAULT_SYNCHRONOUS=" CTIMEOPT_VAL(SQLITE_DEFAULT_SYNCHRONOUS),
+#endif
+#ifdef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT
+ "DEFAULT_WAL_AUTOCHECKPOINT=" CTIMEOPT_VAL(SQLITE_DEFAULT_WAL_AUTOCHECKPOINT),
+#endif
+#ifdef SQLITE_DEFAULT_WAL_SYNCHRONOUS
+ "DEFAULT_WAL_SYNCHRONOUS=" CTIMEOPT_VAL(SQLITE_DEFAULT_WAL_SYNCHRONOUS),
+#endif
+#ifdef SQLITE_DEFAULT_WORKER_THREADS
+ "DEFAULT_WORKER_THREADS=" CTIMEOPT_VAL(SQLITE_DEFAULT_WORKER_THREADS),
+#endif
+#if SQLITE_DIRECT_OVERFLOW_READ
+ "DIRECT_OVERFLOW_READ",
+#endif
+#if SQLITE_DISABLE_DIRSYNC
+ "DISABLE_DIRSYNC",
+#endif
+#if SQLITE_DISABLE_FTS3_UNICODE
+ "DISABLE_FTS3_UNICODE",
+#endif
+#if SQLITE_DISABLE_FTS4_DEFERRED
+ "DISABLE_FTS4_DEFERRED",
+#endif
+#if SQLITE_DISABLE_INTRINSIC
+ "DISABLE_INTRINSIC",
+#endif
+#if SQLITE_DISABLE_LFS
+ "DISABLE_LFS",
+#endif
+#if SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS
+ "DISABLE_PAGECACHE_OVERFLOW_STATS",
+#endif
+#if SQLITE_DISABLE_SKIPAHEAD_DISTINCT
+ "DISABLE_SKIPAHEAD_DISTINCT",
+#endif
+#ifdef SQLITE_ENABLE_8_3_NAMES
+ "ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES),
+#endif
+#if SQLITE_ENABLE_API_ARMOR
+ "ENABLE_API_ARMOR",
+#endif
+#if SQLITE_ENABLE_ATOMIC_WRITE
+ "ENABLE_ATOMIC_WRITE",
+#endif
+#if SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ "ENABLE_BATCH_ATOMIC_WRITE",
+#endif
+#if SQLITE_ENABLE_CEROD
+ "ENABLE_CEROD=" CTIMEOPT_VAL(SQLITE_ENABLE_CEROD),
+#endif
+#if SQLITE_ENABLE_COLUMN_METADATA
+ "ENABLE_COLUMN_METADATA",
+#endif
+#if SQLITE_ENABLE_COLUMN_USED_MASK
+ "ENABLE_COLUMN_USED_MASK",
+#endif
+#if SQLITE_ENABLE_COSTMULT
+ "ENABLE_COSTMULT",
+#endif
+#if SQLITE_ENABLE_CURSOR_HINTS
+ "ENABLE_CURSOR_HINTS",
+#endif
+#if SQLITE_ENABLE_DBSTAT_VTAB
+ "ENABLE_DBSTAT_VTAB",
+#endif
+#if SQLITE_ENABLE_EXPENSIVE_ASSERT
+ "ENABLE_EXPENSIVE_ASSERT",
+#endif
+#if SQLITE_ENABLE_FTS1
+ "ENABLE_FTS1",
+#endif
+#if SQLITE_ENABLE_FTS2
+ "ENABLE_FTS2",
+#endif
+#if SQLITE_ENABLE_FTS3
+ "ENABLE_FTS3",
+#endif
+#if SQLITE_ENABLE_FTS3_PARENTHESIS
+ "ENABLE_FTS3_PARENTHESIS",
+#endif
+#if SQLITE_ENABLE_FTS3_TOKENIZER
+ "ENABLE_FTS3_TOKENIZER",
+#endif
+#if SQLITE_ENABLE_FTS4
+ "ENABLE_FTS4",
+#endif
+#if SQLITE_ENABLE_FTS5
+ "ENABLE_FTS5",
+#endif
+#if SQLITE_ENABLE_HIDDEN_COLUMNS
+ "ENABLE_HIDDEN_COLUMNS",
+#endif
+#if SQLITE_ENABLE_ICU
+ "ENABLE_ICU",
+#endif
+#if SQLITE_ENABLE_IOTRACE
+ "ENABLE_IOTRACE",
+#endif
+#if SQLITE_ENABLE_JSON1
+ "ENABLE_JSON1",
+#endif
+#if SQLITE_ENABLE_LOAD_EXTENSION
+ "ENABLE_LOAD_EXTENSION",
+#endif
+#ifdef SQLITE_ENABLE_LOCKING_STYLE
+ "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE),
+#endif
+#if SQLITE_ENABLE_MEMORY_MANAGEMENT
+ "ENABLE_MEMORY_MANAGEMENT",
+#endif
+#if SQLITE_ENABLE_MEMSYS3
+ "ENABLE_MEMSYS3",
+#endif
+#if SQLITE_ENABLE_MEMSYS5
+ "ENABLE_MEMSYS5",
+#endif
+#if SQLITE_ENABLE_MULTIPLEX
+ "ENABLE_MULTIPLEX",
+#endif
+#if SQLITE_ENABLE_NULL_TRIM
+ "ENABLE_NULL_TRIM",
+#endif
+#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK
+ "ENABLE_OVERSIZE_CELL_CHECK",
+#endif
+#if SQLITE_ENABLE_PREUPDATE_HOOK
+ "ENABLE_PREUPDATE_HOOK",
+#endif
+#if SQLITE_ENABLE_QPSG
+ "ENABLE_QPSG",
+#endif
+#if SQLITE_ENABLE_RBU
+ "ENABLE_RBU",
+#endif
+#if SQLITE_ENABLE_RTREE
+ "ENABLE_RTREE",
+#endif
+#if SQLITE_ENABLE_SELECTTRACE
+ "ENABLE_SELECTTRACE",
+#endif
+#if SQLITE_ENABLE_SESSION
+ "ENABLE_SESSION",
+#endif
+#if SQLITE_ENABLE_SNAPSHOT
+ "ENABLE_SNAPSHOT",
+#endif
+#if SQLITE_ENABLE_SQLLOG
+ "ENABLE_SQLLOG",
+#endif
+#if defined(SQLITE_ENABLE_STAT4)
+ "ENABLE_STAT4",
+#elif defined(SQLITE_ENABLE_STAT3)
+ "ENABLE_STAT3",
+#endif
+#if SQLITE_ENABLE_STMTVTAB
+ "ENABLE_STMTVTAB",
+#endif
+#if SQLITE_ENABLE_STMT_SCANSTATUS
+ "ENABLE_STMT_SCANSTATUS",
+#endif
+#if SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION
+ "ENABLE_UNKNOWN_SQL_FUNCTION",
+#endif
+#if SQLITE_ENABLE_UNLOCK_NOTIFY
+ "ENABLE_UNLOCK_NOTIFY",
+#endif
+#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT
+ "ENABLE_UPDATE_DELETE_LIMIT",
+#endif
+#if SQLITE_ENABLE_URI_00_ERROR
+ "ENABLE_URI_00_ERROR",
+#endif
+#if SQLITE_ENABLE_VFSTRACE
+ "ENABLE_VFSTRACE",
+#endif
+#if SQLITE_ENABLE_WHERETRACE
+ "ENABLE_WHERETRACE",
+#endif
+#if SQLITE_ENABLE_ZIPVFS
+ "ENABLE_ZIPVFS",
+#endif
+#if SQLITE_EXPLAIN_ESTIMATED_ROWS
+ "EXPLAIN_ESTIMATED_ROWS",
+#endif
+#if SQLITE_EXTRA_IFNULLROW
+ "EXTRA_IFNULLROW",
+#endif
+#ifdef SQLITE_EXTRA_INIT
+ "EXTRA_INIT=" CTIMEOPT_VAL(SQLITE_EXTRA_INIT),
+#endif
+#ifdef SQLITE_EXTRA_SHUTDOWN
+ "EXTRA_SHUTDOWN=" CTIMEOPT_VAL(SQLITE_EXTRA_SHUTDOWN),
+#endif
+#ifdef SQLITE_FTS3_MAX_EXPR_DEPTH
+ "FTS3_MAX_EXPR_DEPTH=" CTIMEOPT_VAL(SQLITE_FTS3_MAX_EXPR_DEPTH),
+#endif
+#if SQLITE_FTS5_ENABLE_TEST_MI
+ "FTS5_ENABLE_TEST_MI",
+#endif
+#if SQLITE_FTS5_NO_WITHOUT_ROWID
+ "FTS5_NO_WITHOUT_ROWID",
+#endif
+#if SQLITE_HAS_CODEC
+ "HAS_CODEC",
+#endif
+#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
+ "HAVE_ISNAN",
+#endif
+#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX
+ "HOMEGROWN_RECURSIVE_MUTEX",
+#endif
+#if SQLITE_IGNORE_AFP_LOCK_ERRORS
+ "IGNORE_AFP_LOCK_ERRORS",
+#endif
+#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS
+ "IGNORE_FLOCK_LOCK_ERRORS",
+#endif
+#if SQLITE_INLINE_MEMCPY
+ "INLINE_MEMCPY",
+#endif
+#if SQLITE_INT64_TYPE
+ "INT64_TYPE",
+#endif
+#ifdef SQLITE_INTEGRITY_CHECK_ERROR_MAX
+ "INTEGRITY_CHECK_ERROR_MAX=" CTIMEOPT_VAL(SQLITE_INTEGRITY_CHECK_ERROR_MAX),
+#endif
+#if SQLITE_LIKE_DOESNT_MATCH_BLOBS
+ "LIKE_DOESNT_MATCH_BLOBS",
+#endif
+#if SQLITE_LOCK_TRACE
+ "LOCK_TRACE",
+#endif
+#if SQLITE_LOG_CACHE_SPILL
+ "LOG_CACHE_SPILL",
+#endif
+#ifdef SQLITE_MALLOC_SOFT_LIMIT
+ "MALLOC_SOFT_LIMIT=" CTIMEOPT_VAL(SQLITE_MALLOC_SOFT_LIMIT),
+#endif
+#ifdef SQLITE_MAX_ATTACHED
+ "MAX_ATTACHED=" CTIMEOPT_VAL(SQLITE_MAX_ATTACHED),
+#endif
+#ifdef SQLITE_MAX_COLUMN
+ "MAX_COLUMN=" CTIMEOPT_VAL(SQLITE_MAX_COLUMN),
+#endif
+#ifdef SQLITE_MAX_COMPOUND_SELECT
+ "MAX_COMPOUND_SELECT=" CTIMEOPT_VAL(SQLITE_MAX_COMPOUND_SELECT),
+#endif
+#ifdef SQLITE_MAX_DEFAULT_PAGE_SIZE
+ "MAX_DEFAULT_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_DEFAULT_PAGE_SIZE),
+#endif
+#ifdef SQLITE_MAX_EXPR_DEPTH
+ "MAX_EXPR_DEPTH=" CTIMEOPT_VAL(SQLITE_MAX_EXPR_DEPTH),
+#endif
+#ifdef SQLITE_MAX_FUNCTION_ARG
+ "MAX_FUNCTION_ARG=" CTIMEOPT_VAL(SQLITE_MAX_FUNCTION_ARG),
+#endif
+#ifdef SQLITE_MAX_LENGTH
+ "MAX_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_LENGTH),
+#endif
+#ifdef SQLITE_MAX_LIKE_PATTERN_LENGTH
+ "MAX_LIKE_PATTERN_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_LIKE_PATTERN_LENGTH),
+#endif
+#ifdef SQLITE_MAX_MEMORY
+ "MAX_MEMORY=" CTIMEOPT_VAL(SQLITE_MAX_MEMORY),
+#endif
+#ifdef SQLITE_MAX_MMAP_SIZE
+ "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE),
+#endif
+#ifdef SQLITE_MAX_MMAP_SIZE_
+ "MAX_MMAP_SIZE_=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE_),
+#endif
+#ifdef SQLITE_MAX_PAGE_COUNT
+ "MAX_PAGE_COUNT=" CTIMEOPT_VAL(SQLITE_MAX_PAGE_COUNT),
+#endif
+#ifdef SQLITE_MAX_PAGE_SIZE
+ "MAX_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_PAGE_SIZE),
+#endif
+#ifdef SQLITE_MAX_SCHEMA_RETRY
+ "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY),
+#endif
+#ifdef SQLITE_MAX_SQL_LENGTH
+ "MAX_SQL_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_SQL_LENGTH),
+#endif
+#ifdef SQLITE_MAX_TRIGGER_DEPTH
+ "MAX_TRIGGER_DEPTH=" CTIMEOPT_VAL(SQLITE_MAX_TRIGGER_DEPTH),
+#endif
+#ifdef SQLITE_MAX_VARIABLE_NUMBER
+ "MAX_VARIABLE_NUMBER=" CTIMEOPT_VAL(SQLITE_MAX_VARIABLE_NUMBER),
+#endif
+#ifdef SQLITE_MAX_VDBE_OP
+ "MAX_VDBE_OP=" CTIMEOPT_VAL(SQLITE_MAX_VDBE_OP),
+#endif
+#ifdef SQLITE_MAX_WORKER_THREADS
+ "MAX_WORKER_THREADS=" CTIMEOPT_VAL(SQLITE_MAX_WORKER_THREADS),
+#endif
+#if SQLITE_MEMDEBUG
+ "MEMDEBUG",
+#endif
+#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT
+ "MIXED_ENDIAN_64BIT_FLOAT",
+#endif
+#if SQLITE_MMAP_READWRITE
+ "MMAP_READWRITE",
+#endif
+#if SQLITE_MUTEX_NOOP
+ "MUTEX_NOOP",
+#endif
+#if SQLITE_MUTEX_NREF
+ "MUTEX_NREF",
+#endif
+#if SQLITE_MUTEX_OMIT
+ "MUTEX_OMIT",
+#endif
+#if SQLITE_MUTEX_PTHREADS
+ "MUTEX_PTHREADS",
+#endif
+#if SQLITE_MUTEX_W32
+ "MUTEX_W32",
+#endif
+#if SQLITE_NEED_ERR_NAME
+ "NEED_ERR_NAME",
+#endif
+#if SQLITE_NOINLINE
+ "NOINLINE",
+#endif
+#if SQLITE_NO_SYNC
+ "NO_SYNC",
+#endif
+#if SQLITE_OMIT_ALTERTABLE
+ "OMIT_ALTERTABLE",
+#endif
+#if SQLITE_OMIT_ANALYZE
+ "OMIT_ANALYZE",
+#endif
+#if SQLITE_OMIT_ATTACH
+ "OMIT_ATTACH",
+#endif
+#if SQLITE_OMIT_AUTHORIZATION
+ "OMIT_AUTHORIZATION",
+#endif
+#if SQLITE_OMIT_AUTOINCREMENT
+ "OMIT_AUTOINCREMENT",
+#endif
+#if SQLITE_OMIT_AUTOINIT
+ "OMIT_AUTOINIT",
+#endif
+#if SQLITE_OMIT_AUTOMATIC_INDEX
+ "OMIT_AUTOMATIC_INDEX",
+#endif
+#if SQLITE_OMIT_AUTORESET
+ "OMIT_AUTORESET",
+#endif
+#if SQLITE_OMIT_AUTOVACUUM
+ "OMIT_AUTOVACUUM",
+#endif
+#if SQLITE_OMIT_BETWEEN_OPTIMIZATION
+ "OMIT_BETWEEN_OPTIMIZATION",
+#endif
+#if SQLITE_OMIT_BLOB_LITERAL
+ "OMIT_BLOB_LITERAL",
+#endif
+#if SQLITE_OMIT_BTREECOUNT
+ "OMIT_BTREECOUNT",
+#endif
+#if SQLITE_OMIT_CAST
+ "OMIT_CAST",
+#endif
+#if SQLITE_OMIT_CHECK
+ "OMIT_CHECK",
+#endif
+#if SQLITE_OMIT_COMPLETE
+ "OMIT_COMPLETE",
+#endif
+#if SQLITE_OMIT_COMPOUND_SELECT
+ "OMIT_COMPOUND_SELECT",
+#endif
+#if SQLITE_OMIT_CONFLICT_CLAUSE
+ "OMIT_CONFLICT_CLAUSE",
+#endif
+#if SQLITE_OMIT_CTE
+ "OMIT_CTE",
+#endif
+#if SQLITE_OMIT_DATETIME_FUNCS
+ "OMIT_DATETIME_FUNCS",
+#endif
+#if SQLITE_OMIT_DECLTYPE
+ "OMIT_DECLTYPE",
+#endif
+#if SQLITE_OMIT_DEPRECATED
+ "OMIT_DEPRECATED",
+#endif
+#if SQLITE_OMIT_DISKIO
+ "OMIT_DISKIO",
+#endif
+#if SQLITE_OMIT_EXPLAIN
+ "OMIT_EXPLAIN",
+#endif
+#if SQLITE_OMIT_FLAG_PRAGMAS
+ "OMIT_FLAG_PRAGMAS",
+#endif
+#if SQLITE_OMIT_FLOATING_POINT
+ "OMIT_FLOATING_POINT",
+#endif
+#if SQLITE_OMIT_FOREIGN_KEY
+ "OMIT_FOREIGN_KEY",
+#endif
+#if SQLITE_OMIT_GET_TABLE
+ "OMIT_GET_TABLE",
+#endif
+#if SQLITE_OMIT_HEX_INTEGER
+ "OMIT_HEX_INTEGER",
+#endif
+#if SQLITE_OMIT_INCRBLOB
+ "OMIT_INCRBLOB",
+#endif
+#if SQLITE_OMIT_INTEGRITY_CHECK
+ "OMIT_INTEGRITY_CHECK",
+#endif
+#if SQLITE_OMIT_LIKE_OPTIMIZATION
+ "OMIT_LIKE_OPTIMIZATION",
+#endif
+#if SQLITE_OMIT_LOAD_EXTENSION
+ "OMIT_LOAD_EXTENSION",
+#endif
+#if SQLITE_OMIT_LOCALTIME
+ "OMIT_LOCALTIME",
+#endif
+#if SQLITE_OMIT_LOOKASIDE
+ "OMIT_LOOKASIDE",
+#endif
+#if SQLITE_OMIT_MEMORYDB
+ "OMIT_MEMORYDB",
+#endif
+#if SQLITE_OMIT_OR_OPTIMIZATION
+ "OMIT_OR_OPTIMIZATION",
+#endif
+#if SQLITE_OMIT_PAGER_PRAGMAS
+ "OMIT_PAGER_PRAGMAS",
+#endif
+#if SQLITE_OMIT_PARSER_TRACE
+ "OMIT_PARSER_TRACE",
+#endif
+#if SQLITE_OMIT_POPEN
+ "OMIT_POPEN",
+#endif
+#if SQLITE_OMIT_PRAGMA
+ "OMIT_PRAGMA",
+#endif
+#if SQLITE_OMIT_PROGRESS_CALLBACK
+ "OMIT_PROGRESS_CALLBACK",
+#endif
+#if SQLITE_OMIT_QUICKBALANCE
+ "OMIT_QUICKBALANCE",
+#endif
+#if SQLITE_OMIT_REINDEX
+ "OMIT_REINDEX",
+#endif
+#if SQLITE_OMIT_SCHEMA_PRAGMAS
+ "OMIT_SCHEMA_PRAGMAS",
+#endif
+#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
+ "OMIT_SCHEMA_VERSION_PRAGMAS",
+#endif
+#if SQLITE_OMIT_SHARED_CACHE
+ "OMIT_SHARED_CACHE",
+#endif
+#if SQLITE_OMIT_SHUTDOWN_DIRECTORIES
+ "OMIT_SHUTDOWN_DIRECTORIES",
+#endif
+#if SQLITE_OMIT_SUBQUERY
+ "OMIT_SUBQUERY",
+#endif
+#if SQLITE_OMIT_TCL_VARIABLE
+ "OMIT_TCL_VARIABLE",
+#endif
+#if SQLITE_OMIT_TEMPDB
+ "OMIT_TEMPDB",
+#endif
+#if SQLITE_OMIT_TEST_CONTROL
+ "OMIT_TEST_CONTROL",
+#endif
+#if SQLITE_OMIT_TRACE
+ "OMIT_TRACE",
+#endif
+#if SQLITE_OMIT_TRIGGER
+ "OMIT_TRIGGER",
+#endif
+#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION
+ "OMIT_TRUNCATE_OPTIMIZATION",
+#endif
+#if SQLITE_OMIT_UTF16
+ "OMIT_UTF16",
+#endif
+#if SQLITE_OMIT_VACUUM
+ "OMIT_VACUUM",
+#endif
+#if SQLITE_OMIT_VIEW
+ "OMIT_VIEW",
+#endif
+#if SQLITE_OMIT_VIRTUALTABLE
+ "OMIT_VIRTUALTABLE",
+#endif
+#if SQLITE_OMIT_WAL
+ "OMIT_WAL",
+#endif
+#if SQLITE_OMIT_WSD
+ "OMIT_WSD",
+#endif
+#if SQLITE_OMIT_XFER_OPT
+ "OMIT_XFER_OPT",
+#endif
+#if SQLITE_PCACHE_SEPARATE_HEADER
+ "PCACHE_SEPARATE_HEADER",
+#endif
+#if SQLITE_PERFORMANCE_TRACE
+ "PERFORMANCE_TRACE",
+#endif
+#if SQLITE_POWERSAFE_OVERWRITE
+ "POWERSAFE_OVERWRITE",
+#endif
+#if SQLITE_PREFER_PROXY_LOCKING
+ "PREFER_PROXY_LOCKING",
+#endif
+#if SQLITE_PROXY_DEBUG
+ "PROXY_DEBUG",
+#endif
+#if SQLITE_REVERSE_UNORDERED_SELECTS
+ "REVERSE_UNORDERED_SELECTS",
+#endif
+#if SQLITE_RTREE_INT_ONLY
+ "RTREE_INT_ONLY",
+#endif
+#if SQLITE_SECURE_DELETE
+ "SECURE_DELETE",
+#endif
+#if SQLITE_SMALL_STACK
+ "SMALL_STACK",
+#endif
+#ifdef SQLITE_SORTER_PMASZ
+ "SORTER_PMASZ=" CTIMEOPT_VAL(SQLITE_SORTER_PMASZ),
+#endif
+#if SQLITE_SOUNDEX
+ "SOUNDEX",
+#endif
+#ifdef SQLITE_STAT4_SAMPLES
+ "STAT4_SAMPLES=" CTIMEOPT_VAL(SQLITE_STAT4_SAMPLES),
+#endif
+#ifdef SQLITE_STMTJRNL_SPILL
+ "STMTJRNL_SPILL=" CTIMEOPT_VAL(SQLITE_STMTJRNL_SPILL),
+#endif
+#if SQLITE_SUBSTR_COMPATIBILITY
+ "SUBSTR_COMPATIBILITY",
+#endif
+#if SQLITE_SYSTEM_MALLOC
+ "SYSTEM_MALLOC",
+#endif
+#if SQLITE_TCL
+ "TCL",
+#endif
+#ifdef SQLITE_TEMP_STORE
+ "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE),
+#endif
+#if SQLITE_TEST
+ "TEST",
+#endif
+#if defined(SQLITE_THREADSAFE)
+ "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE),
+#elif defined(THREADSAFE)
+ "THREADSAFE=" CTIMEOPT_VAL(THREADSAFE),
+#else
+ "THREADSAFE=1",
+#endif
+#if SQLITE_UNLINK_AFTER_CLOSE
+ "UNLINK_AFTER_CLOSE",
+#endif
+#if SQLITE_UNTESTABLE
+ "UNTESTABLE",
+#endif
+#if SQLITE_USER_AUTHENTICATION
+ "USER_AUTHENTICATION",
+#endif
+#if SQLITE_USE_ALLOCA
+ "USE_ALLOCA",
+#endif
+#if SQLITE_USE_FCNTL_TRACE
+ "USE_FCNTL_TRACE",
+#endif
+#if SQLITE_USE_URI
+ "USE_URI",
+#endif
+#if SQLITE_VDBE_COVERAGE
+ "VDBE_COVERAGE",
+#endif
+#if SQLITE_WIN32_MALLOC
+ "WIN32_MALLOC",
+#endif
+#if SQLITE_ZERO_MALLOC
+ "ZERO_MALLOC",
+#endif
+/*
+** END CODE GENERATED BY tool/mkctime.tcl
+*/
+};
+
+SQLITE_PRIVATE const char **sqlite3CompileOptions(int *pnOpt){
+ *pnOpt = sizeof(sqlite3azCompileOpt) / sizeof(sqlite3azCompileOpt[0]);
+ return (const char**)sqlite3azCompileOpt;
+}
+
+#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
+
+/************** End of ctime.c ***********************************************/
/************** Begin file sqliteInt.h ***************************************/
/*
** 2001 September 15
** Internal interface definitions for SQLite.
**
*/
-#ifndef _SQLITEINT_H_
-#define _SQLITEINT_H_
+#ifndef SQLITEINT_H
+#define SQLITEINT_H
+
+/* Special Comments:
+**
+** Some comments have special meaning to the tools that measure test
+** coverage:
+**
+** NO_TEST - The branches on this line are not
+** measured by branch coverage. This is
+** used on lines of code that actually
+** implement parts of coverage testing.
+**
+** OPTIMIZATION-IF-TRUE - This branch is allowed to alway be false
+** and the correct answer is still obtained,
+** though perhaps more slowly.
+**
+** OPTIMIZATION-IF-FALSE - This branch is allowed to alway be true
+** and the correct answer is still obtained,
+** though perhaps more slowly.
+**
+** PREVENTS-HARMLESS-OVERREAD - This branch prevents a buffer overread
+** that would be harmless and undetectable
+** if it did occur.
+**
+** In all cases, the special comment must be enclosed in the usual
+** slash-asterisk...asterisk-slash comment marks, with no spaces between the
+** asterisks and the comment text.
+*/
+
+/*
+** Make sure the Tcl calling convention macro is defined. This macro is
+** only used by test code and Tcl integration code.
+*/
+#ifndef SQLITE_TCLAPI
+# define SQLITE_TCLAPI
+#endif
/*
** Include the header file used to customize the compiler options for MSVC.
**
** This file contains code that is specific to MSVC.
*/
-#ifndef _MSVC_H_
-#define _MSVC_H_
+#ifndef SQLITE_MSVC_H
+#define SQLITE_MSVC_H
#if defined(_MSC_VER)
#pragma warning(disable : 4054)
#pragma warning(disable : 4706)
#endif /* defined(_MSC_VER) */
-#endif /* _MSVC_H_ */
+#endif /* SQLITE_MSVC_H */
/************** End of msvc.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
#else
/* This is not VxWorks. */
#define OS_VXWORKS 0
+#define HAVE_FCHOWN 1
+#define HAVE_READLINK 1
+#define HAVE_LSTAT 1
#endif /* defined(_WRS_KERNEL) */
/************** End of vxworks.h *********************************************/
# define _LARGEFILE_SOURCE 1
#endif
-/* What version of GCC is being used. 0 means GCC is not being used */
-#ifdef __GNUC__
+/* The GCC_VERSION and MSVC_VERSION macros are used to
+** conditionally include optimizations for each of these compilers. A
+** value of 0 means that compiler is not being used. The
+** SQLITE_DISABLE_INTRINSIC macro means do not use any compiler-specific
+** optimizations, and hence set all compiler macros to 0
+**
+** There was once also a CLANG_VERSION macro. However, we learn that the
+** version numbers in clang are for "marketing" only and are inconsistent
+** and unreliable. Fortunately, all versions of clang also recognize the
+** gcc version numbers and have reasonable settings for gcc version numbers,
+** so the GCC_VERSION macro will be set to a correct non-zero value even
+** when compiling with clang.
+*/
+#if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC)
# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__)
#else
# define GCC_VERSION 0
#endif
+#if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC)
+# define MSVC_VERSION _MSC_VER
+#else
+# define MSVC_VERSION 0
+#endif
/* Needed for various definitions... */
#if defined(__GNUC__) && !defined(_GNU_SOURCE)
/************** Include sqlite3.h in the middle of sqliteInt.h ***************/
/************** Begin file sqlite3.h *****************************************/
/*
-** 2001 September 15
+** 2001-09-15
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
** the version number) and changes its name to "sqlite3.h" as
** part of the build process.
*/
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
+#ifndef SQLITE3_H
+#define SQLITE3_H
#include <stdarg.h> /* Needed for the definition of va_list */
/*
#ifndef SQLITE_CDECL
# define SQLITE_CDECL
#endif
+#ifndef SQLITE_APICALL
+# define SQLITE_APICALL
+#endif
#ifndef SQLITE_STDCALL
-# define SQLITE_STDCALL
+# define SQLITE_STDCALL SQLITE_APICALL
+#endif
+#ifndef SQLITE_CALLBACK
+# define SQLITE_CALLBACK
+#endif
+#ifndef SQLITE_SYSAPI
+# define SQLITE_SYSAPI
#endif
/*
** be held constant and Z will be incremented or else Y will be incremented
** and Z will be reset to zero.
**
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]),
+** SQLite source code has been stored in the
** <a href="http://www.fossil-scm.org/">Fossil configuration management
** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
** a string which identifies a particular check-in of SQLite
** within its configuration management system. ^The SQLITE_SOURCE_ID
-** string contains the date and time of the check-in (UTC) and an SHA1
-** hash of the entire source tree.
+** string contains the date and time of the check-in (UTC) and a SHA1
+** or SHA3-256 hash of the entire source tree. If the source code has
+** been edited in any way since it was last checked in, then the last
+** four hexadecimal digits of the hash may be modified.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.9.0"
-#define SQLITE_VERSION_NUMBER 3009000
-#define SQLITE_SOURCE_ID "2015-10-14 12:29:53 a721fc0d89495518fe5612e2e3bbc60befd2e90d"
+#define SQLITE_VERSION "3.23.0"
+#define SQLITE_VERSION_NUMBER 3023000
+#define SQLITE_SOURCE_ID "2018-04-02 11:04:16 736b53f57f70b23172c30880186dce7ad9baa3b74e3838cae5847cffb98f5cd2"
/*
** CAPI3REF: Run-Time Library Version Numbers
-** KEYWORDS: sqlite3_version, sqlite3_sourceid
+** KEYWORDS: sqlite3_version sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
**
** <blockquote><pre>
** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 );
** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
** </pre></blockquote>)^
**
** function is provided for use in DLLs since DLL users usually do not have
** direct access to string constants within the DLL. ^The
** sqlite3_libversion_number() function returns an integer equal to
-** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns
+** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns
** a pointer to a string constant whose value is the same as the
-** [SQLITE_SOURCE_ID] C preprocessor macro.
+** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built
+** using an edited copy of [the amalgamation], then the last four characters
+** of the hash might be different from [SQLITE_SOURCE_ID].)^
**
** See also: [sqlite_version()] and [sqlite_source_id()].
*/
SQLITE_API const char sqlite3_version[] = SQLITE_VERSION;
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
/*
** CAPI3REF: Run-Time Library Compilation Options Diagnostics
** [sqlite_compileoption_get()] and the [compile_options pragma].
*/
#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
#endif
/*
**
** See the [threading mode] documentation for additional information.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
/*
** CAPI3REF: Database Connection Handle
*/
#ifdef SQLITE_INT64_TYPE
typedef SQLITE_INT64_TYPE sqlite_int64;
- typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# ifdef SQLITE_UINT64_TYPE
+ typedef SQLITE_UINT64_TYPE sqlite_uint64;
+# else
+ typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# endif
#elif defined(_MSC_VER) || defined(__BORLANDC__)
typedef __int64 sqlite_int64;
typedef unsigned __int64 sqlite_uint64;
** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
** argument is a harmless no-op.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
/*
** The type for a callback function.
** from [sqlite3_malloc()] and passed back through the 5th parameter.
** To avoid memory leaks, the application should invoke [sqlite3_free()]
** on error message strings returned through the 5th parameter of
-** of sqlite3_exec() after the error message string is no longer needed.
+** sqlite3_exec() after the error message string is no longer needed.
** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
** NULL before returning.
** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
** </ul>
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
sqlite3*, /* An open database */
const char *sql, /* SQL to be evaluated */
int (*callback)(void*,int,char**,char**), /* Callback function */
*/
#define SQLITE_OK 0 /* Successful result */
/* beginning-of-error-codes */
-#define SQLITE_ERROR 1 /* SQL error or missing database */
+#define SQLITE_ERROR 1 /* Generic error */
#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
#define SQLITE_PERM 3 /* Access permission denied */
#define SQLITE_ABORT 4 /* Callback routine requested an abort */
#define SQLITE_FULL 13 /* Insertion failed because database is full */
#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
#define SQLITE_PROTOCOL 15 /* Database lock protocol error */
-#define SQLITE_EMPTY 16 /* Database is empty */
+#define SQLITE_EMPTY 16 /* Internal use only */
#define SQLITE_SCHEMA 17 /* The database schema changed */
#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
#define SQLITE_MISUSE 21 /* Library used incorrectly */
#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
#define SQLITE_AUTH 23 /* Authorization denied */
-#define SQLITE_FORMAT 24 /* Auxiliary database format error */
+#define SQLITE_FORMAT 24 /* Not used */
#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
#define SQLITE_NOTADB 26 /* File opened that is not a database file */
#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */
** [result codes]. However, experience has shown that many of
** these result codes are too coarse-grained. They do not provide as
** much information about problems as programmers might like. In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
** support for additional result codes that provide more detailed information
** about errors. These [extended result codes] are enabled or disabled
** on a per database connection basis using the
** the most recent error can be obtained using
** [sqlite3_extended_errcode()].
*/
+#define SQLITE_ERROR_MISSING_COLLSEQ (SQLITE_ERROR | (1<<8))
+#define SQLITE_ERROR_RETRY (SQLITE_ERROR | (2<<8))
#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8))
#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
+#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8))
#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8))
#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8))
+#define SQLITE_READONLY_CANTINIT (SQLITE_READONLY | (5<<8))
+#define SQLITE_READONLY_DIRECTORY (SQLITE_READONLY | (6<<8))
#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8))
#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8))
#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8))
#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8))
#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8))
+#define SQLITE_OK_LOAD_PERMANENTLY (SQLITE_OK | (1<<8))
/*
** CAPI3REF: Flags For File Open Operations
** file that were written at the application level might have changed
** and that adjacent bytes, even bytes within the same sector are
** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open. The
+** flag indicates that a file cannot be deleted when open. The
** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
** read-only media and cannot be changed even by processes with
** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
*/
#define SQLITE_IOCAP_ATOMIC 0x00000001
#define SQLITE_IOCAP_ATOMIC512 0x00000002
#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
/*
** CAPI3REF: File Locking Levels
** <li> [SQLITE_IOCAP_ATOMIC64K]
** <li> [SQLITE_IOCAP_SAFE_APPEND]
** <li> [SQLITE_IOCAP_SEQUENTIAL]
+** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
+** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
+** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** <li>[[SQLITE_FCNTL_FILE_POINTER]]
** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
** to the [sqlite3_file] object associated with a particular database
-** connection. See the [sqlite3_file_control()] documentation for
-** additional information.
+** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER].
+**
+** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
+** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with the journal file (either
+** the [rollback journal] or the [write-ahead log]) for a particular database
+** connection. See also [SQLITE_FCNTL_FILE_POINTER].
**
** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
** No longer in use.
** opcode allows these two values (10 retries and 25 milliseconds of delay)
** to be adjusted. The values are changed for all database connections
** within the same process. The argument is a pointer to an array of two
-** integers where the first integer i the new retry count and the second
+** integers where the first integer is the new retry count and the second
** integer is the delay. If either integer is negative, then the setting
** is not changed but instead the prior value of that setting is written
** into the array entry, allowing the current retry settings to be
** pointer in case this file-control is not implemented. This file-control
** is intended for diagnostic use only.
**
+** <li>[[SQLITE_FCNTL_VFS_POINTER]]
+** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
+** [VFSes] currently in use. ^(The argument X in
+** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
+** of type "[sqlite3_vfs] **". This opcodes will set *X
+** to a pointer to the top-level VFS.)^
+** ^When there are multiple VFS shims in the stack, this opcode finds the
+** upper-most shim only.
+**
** <li>[[SQLITE_FCNTL_PRAGMA]]
** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
** file control is sent to the open [sqlite3_file] object corresponding
** on whether or not the file has been renamed, moved, or deleted since it
** was first opened.
**
+** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the
+** underlying native file handle associated with a file handle. This file
+** control interprets its argument as a pointer to a native file handle and
+** writes the resulting value there.
+**
** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
** opcode causes the xFileControl method to swap the file handle with the one
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_LOCK_TIMEOUT]]
+** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain
+** a file lock using the xLock or xShmLock methods of the VFS to wait
+** for up to M milliseconds before failing, where M is the single
+** unsigned integer parameter.
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
#define SQLITE_FCNTL_WAL_BLOCK 24
#define SQLITE_FCNTL_ZIPVFS 25
#define SQLITE_FCNTL_RBU 26
+#define SQLITE_FCNTL_VFS_POINTER 27
+#define SQLITE_FCNTL_JOURNAL_POINTER 28
+#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
+#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
+#define SQLITE_FCNTL_LOCK_TIMEOUT 34
/* deprecated names */
#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
*/
typedef struct sqlite3_mutex sqlite3_mutex;
+/*
+** CAPI3REF: Loadable Extension Thunk
+**
+** A pointer to the opaque sqlite3_api_routines structure is passed as
+** the third parameter to entry points of [loadable extensions]. This
+** structure must be typedefed in order to work around compiler warnings
+** on some platforms.
+*/
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
/*
** CAPI3REF: OS Interface Object
**
** in the name of the object stands for "virtual file system". See
** the [VFS | VFS documentation] for further information.
**
-** The value of the iVersion field is initially 1 but may be larger in
-** future versions of SQLite. Additional fields may be appended to this
-** object when the iVersion value is increased. Note that the structure
-** of the sqlite3_vfs object changes in the transaction between
-** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
-** modified.
+** The VFS interface is sometimes extended by adding new methods onto
+** the end. Each time such an extension occurs, the iVersion field
+** is incremented. The iVersion value started out as 1 in
+** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2
+** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased
+** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6]. Additional fields
+** may be appended to the sqlite3_vfs object and the iVersion value
+** may increase again in future versions of SQLite.
+** Note that the structure
+** of the sqlite3_vfs object changes in the transition from
+** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0]
+** and yet the iVersion field was not modified.
**
** The szOsFile field is the size of the subclassed [sqlite3_file]
** structure used by this VFS. mxPathname is the maximum length of
const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
/*
** The methods above are in versions 1 through 3 of the sqlite_vfs object.
- ** New fields may be appended in figure versions. The iVersion
+ ** New fields may be appended in future versions. The iVersion
** value will increment whenever this happens.
*/
};
** must return [SQLITE_OK] on success and some other [error code] upon
** failure.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
/*
** CAPI3REF: Configuring The SQLite Library
** ^If the option is unknown or SQLite is unable to set the option
** then this routine returns a non-zero [error code].
*/
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
/*
** CAPI3REF: Configure database connections
** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
** the call is considered successful.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
/*
** CAPI3REF: Memory Allocation Routines
** routines with a wrapper that simulations memory allocation failure or
** tracks memory usage, for example. </dd>
**
+** [[SQLITE_CONFIG_SMALL_MALLOC]] <dt>SQLITE_CONFIG_SMALL_MALLOC</dt>
+** <dd> ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of
+** type int, interpreted as a boolean, which if true provides a hint to
+** SQLite that it should avoid large memory allocations if possible.
+** SQLite will run faster if it is free to make large memory allocations,
+** but some application might prefer to run slower in exchange for
+** guarantees about memory fragmentation that are possible if large
+** allocations are avoided. This hint is normally off.
+** </dd>
+**
** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
** interpreted as a boolean, which enables or disables the collection of
** </dd>
**
** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
-** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer
-** that SQLite can use for scratch memory. ^(There are three arguments
-** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte
-** aligned memory buffer from which the scratch allocations will be
-** drawn, the size of each scratch allocation (sz),
-** and the maximum number of scratch allocations (N).)^
-** The first argument must be a pointer to an 8-byte aligned buffer
-** of at least sz*N bytes of memory.
-** ^SQLite will not use more than one scratch buffers per thread.
-** ^SQLite will never request a scratch buffer that is more than 6
-** times the database page size.
-** ^If SQLite needs needs additional
-** scratch memory beyond what is provided by this configuration option, then
-** [sqlite3_malloc()] will be used to obtain the memory needed.<p>
-** ^When the application provides any amount of scratch memory using
-** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large
-** [sqlite3_malloc|heap allocations].
-** This can help [Robson proof|prevent memory allocation failures] due to heap
-** fragmentation in low-memory embedded systems.
+** <dd> The SQLITE_CONFIG_SCRATCH option is no longer used.
** </dd>
**
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
** that SQLite can use for the database page cache with the default page
** cache implementation.
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
-** configuration option.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned
-** memory, the size of each page buffer (sz), and the number of pages (N).
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
** The sz argument should be the size of the largest database page
** (a power of two between 512 and 65536) plus some extra bytes for each
** page header. ^The number of extra bytes needed by the page header
-** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option
-** to [sqlite3_config()].
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary. The first
-** argument should pointer to an 8-byte aligned block of memory that
-** is at least sz*N bytes of memory, otherwise subsequent behavior is
-** undefined.
-** ^SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache. ^If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
+** for the sz parameter to be larger than necessary. The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
**
** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
** that SQLite will use for all of its dynamic memory allocation needs
-** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and
-** [SQLITE_CONFIG_PAGECACHE].
+** beyond those provided for by [SQLITE_CONFIG_PAGECACHE].
** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
** [SQLITE_ERROR] if invoked otherwise.
** is enabled (using the [PRAGMA threads] command) and the amount of content
** to be sorted exceeds the page size times the minimum of the
** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
+#define SQLITE_CONFIG_SCRATCH 6 /* No longer used */
#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */
#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */
+#define SQLITE_CONFIG_SMALL_MALLOC 27 /* boolean */
/*
** CAPI3REF: Database Connection Configuration Options
** following this call. The second parameter may be a NULL pointer, in
** which case the trigger setting is not reported back. </dd>
**
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call. The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
+** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
+** interface independently of the [load_extension()] SQL function.
+** The [sqlite3_enable_load_extension()] API enables or disables both the
+** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
+** There should be two additional arguments.
+** When the first argument to this interface is 1, then only the C-API is
+** enabled and the SQL function remains disabled. If the first argument to
+** this interface is 0, then both the C-API and the SQL function are disabled.
+** If the first argument is -1, then no changes are made to state of either the
+** C-API or the SQL function.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
+** is disabled or enabled following this call. The second parameter may
+** be a NULL pointer, in which case the new setting is not reported back.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema. ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main". ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
+** <dd> Usually, when a database in wal mode is closed or detached from a
+** database handle, SQLite checks if this will mean that there are now no
+** connections at all to the database. If so, it performs a checkpoint
+** operation before closing the connection. This option may be used to
+** override this behaviour. The first parameter passed to this operation
+** is an integer - positive to disable checkpoints-on-close, or zero (the
+** default) to enable them, and negative to leave the setting unchanged.
+** The second parameter is a pointer to an integer
+** into which is written 0 or 1 to indicate whether checkpoints-on-close
+** have been disabled - 0 if they are not disabled, 1 if they are.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
+** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates
+** the [query planner stability guarantee] (QPSG). When the QPSG is active,
+** a single SQL query statement will always use the same algorithm regardless
+** of values of [bound parameters].)^ The QPSG disables some query optimizations
+** that look at the values of bound parameters, which can make some queries
+** slower. But the QPSG has the advantage of more predictable behavior. With
+** the QPSG active, SQLite will always use the same query plan in the field as
+** was used during testing in the lab.
+** The first argument to this setting is an integer which is 0 to disable
+** the QPSG, positive to enable QPSG, or negative to leave the setting
+** unchanged. The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether the QPSG is disabled or enabled
+** following this call.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_TRIGGER_EQP</dt>
+** <dd> By default, the output of EXPLAIN QUERY PLAN commands does not
+** include output for any operations performed by trigger programs. This
+** option is used to set or clear (the default) a flag that governs this
+** behavior. The first parameter passed to this operation is an integer -
+** positive to enable output for trigger programs, or zero to disable it,
+** or negative to leave the setting unchanged.
+** The second parameter is a pointer to an integer into which is written
+** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if
+** it is not disabled, 1 if it is.
+** </dd>
** </dl>
*/
-#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
-
+#define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */
+#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
+#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_QPSG 1007 /* int int* */
+#define SQLITE_DBCONFIG_TRIGGER_EQP 1008 /* int int* */
+#define SQLITE_DBCONFIG_MAX 1008 /* Largest DBCONFIG */
/*
** CAPI3REF: Enable Or Disable Extended Result Codes
** [extended result codes] feature of SQLite. ^The extended result
** codes are disabled by default for historical compatibility.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
/*
** CAPI3REF: Last Insert Rowid
** the table has a column of type [INTEGER PRIMARY KEY] then that column
** is another alias for the rowid.
**
-** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the
-** most recent successful [INSERT] into a rowid table or [virtual table]
-** on database connection D.
-** ^Inserts into [WITHOUT ROWID] tables are not recorded.
-** ^If no successful [INSERT]s into rowid tables
-** have ever occurred on the database connection D,
-** then sqlite3_last_insert_rowid(D) returns zero.
-**
-** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
-** method, then this routine will return the [rowid] of the inserted
-** row as long as the trigger or virtual table method is running.
-** But once the trigger or virtual table method ends, the value returned
-** by this routine reverts to what it was before the trigger or virtual
-** table method began.)^
+** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of
+** the most recent successful [INSERT] into a rowid table or [virtual table]
+** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not
+** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
+** on the database connection D, then sqlite3_last_insert_rowid(D) returns
+** zero.
+**
+** As well as being set automatically as rows are inserted into database
+** tables, the value returned by this function may be set explicitly by
+** [sqlite3_set_last_insert_rowid()]
+**
+** Some virtual table implementations may INSERT rows into rowid tables as
+** part of committing a transaction (e.g. to flush data accumulated in memory
+** to disk). In this case subsequent calls to this function return the rowid
+** associated with these internal INSERT operations, which leads to
+** unintuitive results. Virtual table implementations that do write to rowid
+** tables in this way can avoid this problem by restoring the original
+** rowid value using [sqlite3_set_last_insert_rowid()] before returning
+** control to the user.
+**
+** ^(If an [INSERT] occurs within a trigger then this routine will
+** return the [rowid] of the inserted row as long as the trigger is
+** running. Once the trigger program ends, the value returned
+** by this routine reverts to what it was before the trigger was fired.)^
**
** ^An [INSERT] that fails due to a constraint violation is not a
** successful [INSERT] and does not change the value returned by this
** unpredictable and might not equal either the old or the new
** last insert [rowid].
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
+
+/*
+** CAPI3REF: Set the Last Insert Rowid value.
+** METHOD: sqlite3
+**
+** The sqlite3_set_last_insert_rowid(D, R) method allows the application to
+** set the value returned by calling sqlite3_last_insert_rowid(D) to R
+** without inserting a row into the database.
+*/
+SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
/*
** CAPI3REF: Count The Number Of Rows Modified
** while [sqlite3_changes()] is running then the value returned
** is unpredictable and not meaningful.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
/*
** CAPI3REF: Total Number Of Rows Modified
** while [sqlite3_total_changes()] is running then the value
** returned is unpredictable and not meaningful.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
/*
** CAPI3REF: Interrupt A Long-Running Query
** ^A call to sqlite3_interrupt(D) that occurs when there are no running
** SQL statements is a no-op and has no effect on SQL statements
** that are started after the sqlite3_interrupt() call returns.
-**
-** If the database connection closes while [sqlite3_interrupt()]
-** is running then bad things will likely happen.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
/*
** CAPI3REF: Determine If An SQL Statement Is Complete
** The input to [sqlite3_complete16()] must be a zero-terminated
** UTF-16 string in native byte order.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
/*
** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
** A busy handler must not close the database connection
** or [prepared statement] that invoked the busy handler.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
/*
** CAPI3REF: Set A Busy Timeout
**
** See also: [PRAGMA busy_timeout]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
/*
** CAPI3REF: Convenience Routines For Running Queries
** reflected in subsequent calls to [sqlite3_errcode()] or
** [sqlite3_errmsg()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
sqlite3 *db, /* An open database */
const char *zSql, /* SQL to be evaluated */
char ***pazResult, /* Results of the query */
int *pnColumn, /* Number of result columns written here */
char **pzErrmsg /* Error msg written here */
);
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
/*
** CAPI3REF: Formatted String Printing Functions
**
** These routines are work-alikes of the "printf()" family of functions
** from the standard C library.
-** These routines understand most of the common K&R formatting options,
-** plus some additional non-standard formats, detailed below.
-** Note that some of the more obscure formatting options from recent
-** C-library standards are omitted from this implementation.
+** These routines understand most of the common formatting options from
+** the standard library printf()
+** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]).
+** See the [built-in printf()] documentation for details.
**
** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
-** results into memory obtained from [sqlite3_malloc()].
+** results into memory obtained from [sqlite3_malloc64()].
** The strings returned by these two routines should be
** released by [sqlite3_free()]. ^Both routines return a
-** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
+** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough
** memory to hold the resulting string.
**
** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
**
** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
**
-** These routines all implement some additional formatting
-** options that are useful for constructing SQL statements.
-** All of the usual printf() formatting options apply. In addition, there
-** is are "%q", "%Q", "%w" and "%z" options.
-**
-** ^(The %q option works like %s in that it substitutes a nul-terminated
-** string from the argument list. But %q also doubles every '\'' character.
-** %q is designed for use inside a string literal.)^ By doubling each '\''
-** character it escapes that character and allows it to be inserted into
-** the string.
-**
-** For example, assume the string variable zText contains text as follows:
-**
-** <blockquote><pre>
-** char *zText = "It's a happy day!";
-** </pre></blockquote>
-**
-** One can use this text in an SQL statement as follows:
-**
-** <blockquote><pre>
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** Because the %q format string is used, the '\'' character in zText
-** is escaped and the SQL generated is as follows:
-**
-** <blockquote><pre>
-** INSERT INTO table1 VALUES('It''s a happy day!')
-** </pre></blockquote>
-**
-** This is correct. Had we used %s instead of %q, the generated SQL
-** would have looked like this:
-**
-** <blockquote><pre>
-** INSERT INTO table1 VALUES('It's a happy day!');
-** </pre></blockquote>
-**
-** This second example is an SQL syntax error. As a general rule you should
-** always use %q instead of %s when inserting text into a string literal.
-**
-** ^(The %Q option works like %q except it also adds single quotes around
-** the outside of the total string. Additionally, if the parameter in the
-** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
-** single quotes).)^ So, for example, one could say:
-**
-** <blockquote><pre>
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** The code above will render a correct SQL statement in the zSQL
-** variable even if the zText variable is a NULL pointer.
-**
-** ^(The "%w" formatting option is like "%q" except that it expects to
-** be contained within double-quotes instead of single quotes, and it
-** escapes the double-quote character instead of the single-quote
-** character.)^ The "%w" formatting option is intended for safely inserting
-** table and column names into a constructed SQL statement.
-**
-** ^(The "%z" formatting option works like "%s" but with the
-** addition that after the string has been read and copied into
-** the result, [sqlite3_free()] is called on the input string.)^
+** See also: [built-in printf()], [printf() SQL function]
*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
/*
** CAPI3REF: Memory Allocation Subsystem
** a block of memory after it has been released using
** [sqlite3_free()] or [sqlite3_realloc()].
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
/*
** CAPI3REF: Memory Allocator Statistics
** by [sqlite3_memory_highwater(1)] is the high-water mark
** prior to the reset.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
/*
** CAPI3REF: Pseudo-Random Number Generator
** internally and without recourse to the [sqlite3_vfs] xRandomness
** method.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
/*
** CAPI3REF: Compile-Time Authorization Callbacks
** METHOD: sqlite3
+** KEYWORDS: {authorizer callback}
**
** ^This routine registers an authorizer callback with a particular
** [database connection], supplied in the first argument.
** ^The authorizer callback is invoked as SQL statements are being compiled
** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
-** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various
+** [sqlite3_prepare_v3()], [sqlite3_prepare16()], [sqlite3_prepare16_v2()],
+** and [sqlite3_prepare16_v3()]. ^At various
** points during the compilation process, as logic is being created
** to perform various actions, the authorizer callback is invoked to
** see if those actions are allowed. ^The authorizer callback should
** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
** to the callback is an integer [SQLITE_COPY | action code] that specifies
** the particular action to be authorized. ^The third through sixth parameters
-** to the callback are zero-terminated strings that contain additional
-** details about the action to be authorized.
+** to the callback are either NULL pointers or zero-terminated strings
+** that contain additional details about the action to be authorized.
+** Applications must always be prepared to encounter a NULL pointer in any
+** of the third through the sixth parameters of the authorization callback.
**
** ^If the action code is [SQLITE_READ]
** and the callback returns [SQLITE_IGNORE] then the
** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE]
** return can be used to deny an untrusted user access to individual
** columns of a table.
+** ^When a table is referenced by a [SELECT] but no column values are
+** extracted from that table (for example in a query like
+** "SELECT count(*) FROM tab") then the [SQLITE_READ] authorizer callback
+** is invoked once for that table with a column name that is an empty string.
** ^If the action code is [SQLITE_DELETE] and the callback returns
** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
** [truncate optimization] is disabled and all rows are deleted individually.
** as stated in the previous paragraph, sqlite3_step() invokes
** sqlite3_prepare_v2() to reprepare a statement after a schema change.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
sqlite3*,
int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
void *pUserData
** CAPI3REF: Tracing And Profiling Functions
** METHOD: sqlite3
**
+** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
+** instead of the routines described here.
+**
** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.
**
** sqlite3_profile() function is considered experimental and is
** subject to change in future versions of SQLite.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
+ void(*xTrace)(void*,const char*), void*);
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
+/*
+** CAPI3REF: SQL Trace Event Codes
+** KEYWORDS: SQLITE_TRACE
+**
+** These constants identify classes of events that can be monitored
+** using the [sqlite3_trace_v2()] tracing logic. The M argument
+** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of
+** the following constants. ^The first argument to the trace callback
+** is one of the following constants.
+**
+** New tracing constants may be added in future releases.
+**
+** ^A trace callback has four arguments: xCallback(T,C,P,X).
+** ^The T argument is one of the integer type codes above.
+** ^The C argument is a copy of the context pointer passed in as the
+** fourth argument to [sqlite3_trace_v2()].
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** <dl>
+** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
+** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
+** first begins running and possibly at other times during the
+** execution of the prepared statement, such as at the start of each
+** trigger subprogram. ^The P argument is a pointer to the
+** [prepared statement]. ^The X argument is a pointer to a string which
+** is the unexpanded SQL text of the prepared statement or an SQL comment
+** that indicates the invocation of a trigger. ^The callback can compute
+** the same text that would have been returned by the legacy [sqlite3_trace()]
+** interface by using the X argument when X begins with "--" and invoking
+** [sqlite3_expanded_sql(P)] otherwise.
+**
+** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
+** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
+** information as is provided by the [sqlite3_profile()] callback.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument points to a 64-bit integer which is the estimated of
+** the number of nanosecond that the prepared statement took to run.
+** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
+**
+** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
+** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
+** statement generates a single row of result.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument is unused.
+**
+** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
+** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
+** connection closes.
+** ^The P argument is a pointer to the [database connection] object
+** and the X argument is unused.
+** </dl>
+*/
+#define SQLITE_TRACE_STMT 0x01
+#define SQLITE_TRACE_PROFILE 0x02
+#define SQLITE_TRACE_ROW 0x04
+#define SQLITE_TRACE_CLOSE 0x08
+
+/*
+** CAPI3REF: SQL Trace Hook
+** METHOD: sqlite3
+**
+** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
+** function X against [database connection] D, using property mask M
+** and context pointer P. ^If the X callback is
+** NULL or if the M mask is zero, then tracing is disabled. The
+** M argument should be the bitwise OR-ed combination of
+** zero or more [SQLITE_TRACE] constants.
+**
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
+**
+** ^The X callback is invoked whenever any of the events identified by
+** mask M occur. ^The integer return value from the callback is currently
+** ignored, though this may change in future releases. Callback
+** implementations should return zero to ensure future compatibility.
+**
+** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
+** ^The T argument is one of the [SQLITE_TRACE]
+** constants to indicate why the callback was invoked.
+** ^The C argument is a copy of the context pointer.
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** The sqlite3_trace_v2() interface is intended to replace the legacy
+** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
+** are deprecated.
+*/
+SQLITE_API int sqlite3_trace_v2(
+ sqlite3*,
+ unsigned uMask,
+ int(*xCallback)(unsigned,void*,void*,void*),
+ void *pCtx
+);
+
/*
** CAPI3REF: Query Progress Callbacks
** METHOD: sqlite3
** database connections for the meaning of "modify" in this paragraph.
**
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
/*
** CAPI3REF: Opening A New Database Connection
** ^If [URI filename] interpretation is enabled, and the filename argument
** begins with "file:", then the filename is interpreted as a URI. ^URI
** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
-** set in the fourth argument to sqlite3_open_v2(), or if it has
+** set in the third argument to sqlite3_open_v2(), or if it has
** been enabled globally using the [SQLITE_CONFIG_URI] option with the
** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
-** As of SQLite version 3.7.7, URI filename interpretation is turned off
+** URI filename interpretation is turned off
** by default, but future releases of SQLite might enable URI filename
** interpretation by default. See "[URI filenames]" for additional
** information.
**
** See also: [sqlite3_temp_directory]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
const void *filename, /* Database filename (UTF-16) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb, /* OUT: SQLite db handle */
int flags, /* Flags */
** VFS method, then the behavior of this routine is undefined and probably
** undesirable.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
/*
** was invoked incorrectly by the application. In that case, the
** error code and message may or may not be set.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
/*
** CAPI3REF: Prepared Statement Object
**
** New run-time limit categories may be added in future releases.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
/*
** CAPI3REF: Run-Time Limit Categories
**
** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
** <dd>The maximum number of instructions in a virtual machine program
-** used to implement an SQL statement. This limit is not currently
-** enforced, though that might be added in some future release of
-** SQLite.</dd>)^
+** used to implement an SQL statement. If [sqlite3_prepare_v2()] or
+** the equivalent tries to allocate space for more than this many opcodes
+** in a single prepared statement, an SQLITE_NOMEM error is returned.</dd>)^
**
** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
** <dd>The maximum number of arguments on a function.</dd>)^
#define SQLITE_LIMIT_TRIGGER_DEPTH 10
#define SQLITE_LIMIT_WORKER_THREADS 11
+/*
+** CAPI3REF: Prepare Flags
+**
+** These constants define various flags that can be passed into
+** "prepFlags" parameter of the [sqlite3_prepare_v3()] and
+** [sqlite3_prepare16_v3()] interfaces.
+**
+** New flags may be added in future releases of SQLite.
+**
+** <dl>
+** [[SQLITE_PREPARE_PERSISTENT]] ^(<dt>SQLITE_PREPARE_PERSISTENT</dt>
+** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner
+** that the prepared statement will be retained for a long time and
+** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
+** and [sqlite3_prepare16_v3()] assume that the prepared statement will
+** be used just once or at most a few times and then destroyed using
+** [sqlite3_finalize()] relatively soon. The current implementation acts
+** on this hint by avoiding the use of [lookaside memory] so as not to
+** deplete the limited store of lookaside memory. Future versions of
+** SQLite may act on this hint differently.
+** </dl>
+*/
+#define SQLITE_PREPARE_PERSISTENT 0x01
+
/*
** CAPI3REF: Compiling An SQL Statement
** KEYWORDS: {SQL statement compiler}
** METHOD: sqlite3
** CONSTRUCTOR: sqlite3_stmt
**
-** To execute an SQL query, it must first be compiled into a byte-code
-** program using one of these routines.
+** To execute an SQL statement, it must first be compiled into a byte-code
+** program using one of these routines. Or, in other words, these routines
+** are constructors for the [prepared statement] object.
+**
+** The preferred routine to use is [sqlite3_prepare_v2()]. The
+** [sqlite3_prepare()] interface is legacy and should be avoided.
+** [sqlite3_prepare_v3()] has an extra "prepFlags" option that is used
+** for special purposes.
+**
+** The use of the UTF-8 interfaces is preferred, as SQLite currently
+** does all parsing using UTF-8. The UTF-16 interfaces are provided
+** as a convenience. The UTF-16 interfaces work by converting the
+** input text into UTF-8, then invoking the corresponding UTF-8 interface.
**
** The first argument, "db", is a [database connection] obtained from a
** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
** [sqlite3_open16()]. The database connection must not have been closed.
**
** The second argument, "zSql", is the statement to be compiled, encoded
-** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
-** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
-** use UTF-16.
+** as either UTF-8 or UTF-16. The sqlite3_prepare(), sqlite3_prepare_v2(),
+** and sqlite3_prepare_v3()
+** interfaces use UTF-8, and sqlite3_prepare16(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() use UTF-16.
**
** ^If the nByte argument is negative, then zSql is read up to the
** first zero terminator. ^If nByte is positive, then it is the
** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
** otherwise an [error code] is returned.
**
-** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
-** recommended for all new programs. The two older interfaces are retained
-** for backwards compatibility, but their use is discouraged.
-** ^In the "v2" interfaces, the prepared statement
+** The sqlite3_prepare_v2(), sqlite3_prepare_v3(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() interfaces are recommended for all new programs.
+** The older interfaces (sqlite3_prepare() and sqlite3_prepare16())
+** are retained for backwards compatibility, but their use is discouraged.
+** ^In the "vX" interfaces, the prepared statement
** that is returned (the [sqlite3_stmt] object) contains a copy of the
** original SQL text. This causes the [sqlite3_step()] interface to
** behave differently in three ways:
** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
** </li>
** </ol>
+**
+** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having
+** the extra prepFlags parameter, which is a bit array consisting of zero or
+** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The
+** sqlite3_prepare_v2() interface works exactly the same as
+** sqlite3_prepare_v3() with a zero prepFlags parameter.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
+ sqlite3 *db, /* Database handle */
+ const char *zSql, /* SQL statement, UTF-8 encoded */
+ int nByte, /* Maximum length of zSql in bytes. */
+ sqlite3_stmt **ppStmt, /* OUT: Statement handle */
+ const char **pzTail /* OUT: Pointer to unused portion of zSql */
+);
+SQLITE_API int sqlite3_prepare_v2(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v3(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
+ sqlite3 *db, /* Database handle */
+ const void *zSql, /* SQL statement, UTF-16 encoded */
+ int nByte, /* Maximum length of zSql in bytes. */
+ sqlite3_stmt **ppStmt, /* OUT: Statement handle */
+ const void **pzTail /* OUT: Pointer to unused portion of zSql */
+);
+SQLITE_API int sqlite3_prepare16_v2(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v3(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
** CAPI3REF: Retrieving Statement SQL
** METHOD: sqlite3_stmt
**
-** ^This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
+** SQL text used to create [prepared statement] P if P was
+** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
+** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
+** string containing the SQL text of prepared statement P with
+** [bound parameters] expanded.
+**
+** ^(For example, if a prepared statement is created using the SQL
+** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
+** and parameter :xyz is unbound, then sqlite3_sql() will return
+** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
+** will return "SELECT 2345,NULL".)^
+**
+** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
+** is available to hold the result, or if the result would exceed the
+** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
+**
+** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
+** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time
+** option causes sqlite3_expanded_sql() to always return NULL.
+**
+** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
+** automatically freed when the prepared statement is finalized.
+** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
+** is obtained from [sqlite3_malloc()] and must be free by the application
+** by passing it to [sqlite3_free()].
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Determine If An SQL Statement Writes The Database
** sqlite3_stmt_readonly() to return true since, while those statements
** change the configuration of a database connection, they do not make
** changes to the content of the database files on disk.
+** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
+** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
+** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
+** sqlite3_stmt_readonly() returns false for those commands.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Determine If A Prepared Statement Has Been Reset
** for example, in diagnostic routines to search for prepared
** statements that are holding a transaction open.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
/*
** CAPI3REF: Dynamically Typed Value Object
** implementation of [application-defined SQL functions] are protected.
** ^The sqlite3_value object returned by
** [sqlite3_column_value()] is unprotected.
-** Unprotected sqlite3_value objects may only be used with
-** [sqlite3_result_value()] and [sqlite3_bind_value()].
+** Unprotected sqlite3_value objects may only be used as arguments
+** to [sqlite3_result_value()], [sqlite3_bind_value()], and
+** [sqlite3_value_dup()].
** The [sqlite3_value_blob | sqlite3_value_type()] family of
** interfaces require protected sqlite3_value objects.
*/
-typedef struct Mem sqlite3_value;
+typedef struct sqlite3_value sqlite3_value;
/*
** CAPI3REF: SQL Function Context Object
** [sqlite3_blob_open | incremental BLOB I/O] routines.
** ^A negative value for the zeroblob results in a zero-length BLOB.
**
+** ^The sqlite3_bind_pointer(S,I,P,T,D) routine causes the I-th parameter in
+** [prepared statement] S to have an SQL value of NULL, but to also be
+** associated with the pointer P of type T. ^D is either a NULL pointer or
+** a pointer to a destructor function for P. ^SQLite will invoke the
+** destructor D with a single argument of P when it is finished using
+** P. The T parameter should be a static string, preferably a string
+** literal. The sqlite3_bind_pointer() routine is part of the
+** [pointer passing interface] added for SQLite 3.20.0.
+**
** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
** for the [prepared statement] or with a prepared statement for which
** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
** See also: [sqlite3_bind_parameter_count()],
** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_pointer(sqlite3_stmt*, int, void*, const char*,void(*)(void*));
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
/*
** CAPI3REF: Number Of SQL Parameters
** [sqlite3_bind_parameter_name()], and
** [sqlite3_bind_parameter_index()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
/*
** CAPI3REF: Name Of A Host Parameter
** ^If the value N is out of range or if the N-th parameter is
** nameless, then NULL is returned. ^The returned string is
** always in UTF-8 encoding even if the named parameter was
-** originally specified as UTF-16 in [sqlite3_prepare16()] or
-** [sqlite3_prepare16_v2()].
+** originally specified as UTF-16 in [sqlite3_prepare16()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
/*
** CAPI3REF: Index Of A Parameter With A Given Name
** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero
** is returned if no matching parameter is found. ^The parameter
** name must be given in UTF-8 even if the original statement
-** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
+** was prepared from UTF-16 text using [sqlite3_prepare16_v2()] or
+** [sqlite3_prepare16_v3()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_name()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
/*
** CAPI3REF: Reset All Bindings On A Prepared Statement
** the [sqlite3_bind_blob | bindings] on a [prepared statement].
** ^Use this routine to reset all host parameters to NULL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
/*
** CAPI3REF: Number Of Columns In A Result Set
** METHOD: sqlite3_stmt
**
** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
+** [prepared statement]. ^If this routine returns 0, that means the
+** [prepared statement] returns no data (for example an [UPDATE]).
+** ^However, just because this routine returns a positive number does not
+** mean that one or more rows of data will be returned. ^A SELECT statement
+** will always have a positive sqlite3_column_count() but depending on the
+** WHERE clause constraints and the table content, it might return no rows.
**
** See also: [sqlite3_data_count()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Column Names In A Result Set
** then the name of the column is unspecified and may change from
** one release of SQLite to the next.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
/*
** CAPI3REF: Source Of Data In A Query Result
** for the same [prepared statement] and result column
** at the same time then the results are undefined.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
/*
** CAPI3REF: Declared Datatype Of A Query Result
** is associated with individual values, not with the containers
** used to hold those values.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
/*
** CAPI3REF: Evaluate An SQL Statement
** METHOD: sqlite3_stmt
**
-** After a [prepared statement] has been prepared using either
-** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
+** After a [prepared statement] has been prepared using any of
+** [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], [sqlite3_prepare16_v2()],
+** or [sqlite3_prepare16_v3()] or one of the legacy
** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
** must be called one or more times to evaluate the statement.
**
** The details of the behavior of the sqlite3_step() interface depend
-** on whether the statement was prepared using the newer "v2" interface
-** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
-** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
-** new "v2" interface is recommended for new applications but the legacy
+** on whether the statement was prepared using the newer "vX" interfaces
+** [sqlite3_prepare_v3()], [sqlite3_prepare_v2()], [sqlite3_prepare16_v3()],
+** [sqlite3_prepare16_v2()] or the older legacy
+** interfaces [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
+** new "vX" interface is recommended for new applications but the legacy
** interface will continue to be supported.
**
** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
** other than [SQLITE_ROW] before any subsequent invocation of
** sqlite3_step(). Failure to reset the prepared statement using
** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step(). But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
** calling [sqlite3_reset()] automatically in this circumstance rather
** than returning [SQLITE_MISUSE]. This is not considered a compatibility
** break because any application that ever receives an SQLITE_MISUSE error
** specific [error codes] that better describes the error.
** We admit that this is a goofy design. The problem has been fixed
** with the "v2" interface. If you prepare all of your SQL statements
-** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
+** using [sqlite3_prepare_v3()] or [sqlite3_prepare_v2()]
+** or [sqlite3_prepare16_v2()] or [sqlite3_prepare16_v3()] instead
** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
** then the more specific [error codes] are returned directly
-** by sqlite3_step(). The use of the "v2" interface is recommended.
+** by sqlite3_step(). The use of the "vX" interfaces is recommended.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
/*
** CAPI3REF: Number of columns in a result set
**
** See also: [sqlite3_column_count()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Fundamental Datatypes
** KEYWORDS: {column access functions}
** METHOD: sqlite3_stmt
**
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_column_blob</b><td>→<td>BLOB result
+** <tr><td><b>sqlite3_column_double</b><td>→<td>REAL result
+** <tr><td><b>sqlite3_column_int</b><td>→<td>32-bit INTEGER result
+** <tr><td><b>sqlite3_column_int64</b><td>→<td>64-bit INTEGER result
+** <tr><td><b>sqlite3_column_text</b><td>→<td>UTF-8 TEXT result
+** <tr><td><b>sqlite3_column_text16</b><td>→<td>UTF-16 TEXT result
+** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an
+** [sqlite3_value|unprotected sqlite3_value] object.
+** <tr><td> <td> <td>
+** <tr><td><b>sqlite3_column_bytes</b><td>→<td>Size of a BLOB
+** or a UTF-8 TEXT result in bytes
+** <tr><td><b>sqlite3_column_bytes16 </b>
+** <td>→ <td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_column_type</b><td>→<td>Default
+** datatype of the result
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
** ^These routines return information about a single column of the current
** result row of a query. ^In every case the first argument is a pointer
** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
** are called from a different thread while any of these routines
** are pending, then the results are undefined.
**
+** The first six interfaces (_blob, _double, _int, _int64, _text, and _text16)
+** each return the value of a result column in a specific data format. If
+** the result column is not initially in the requested format (for example,
+** if the query returns an integer but the sqlite3_column_text() interface
+** is used to extract the value) then an automatic type conversion is performed.
+**
** ^The sqlite3_column_type() routine returns the
** [SQLITE_INTEGER | datatype code] for the initial data type
** of the result column. ^The returned value is one of [SQLITE_INTEGER],
-** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
-** returned by sqlite3_column_type() is only meaningful if no type
-** conversions have occurred as described below. After a type conversion,
-** the value returned by sqlite3_column_type() is undefined. Future
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].
+** The return value of sqlite3_column_type() can be used to decide which
+** of the first six interface should be used to extract the column value.
+** The value returned by sqlite3_column_type() is only meaningful if no
+** automatic type conversions have occurred for the value in question.
+** After a type conversion, the result of calling sqlite3_column_type()
+** is undefined, though harmless. Future
** versions of SQLite may change the behavior of sqlite3_column_type()
** following a type conversion.
**
+** If the result is a BLOB or a TEXT string, then the sqlite3_column_bytes()
+** or sqlite3_column_bytes16() interfaces can be used to determine the size
+** of that BLOB or string.
+**
** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
** routine returns the number of bytes in that BLOB or string.
** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
** [sqlite3_column_value()] is used in any other way, including calls
** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
** or [sqlite3_value_bytes()], the behavior is not threadsafe.
+** Hence, the sqlite3_column_value() interface
+** is normally only useful within the implementation of
+** [application-defined SQL functions] or [virtual tables], not within
+** top-level application code.
**
-** These routines attempt to convert the value where appropriate. ^For
-** example, if the internal representation is FLOAT and a text result
+** The these routines may attempt to convert the datatype of the result.
+** ^For example, if the internal representation is FLOAT and a text result
** is requested, [sqlite3_snprintf()] is used internally to perform the
** conversion automatically. ^(The following table details the conversions
** that are applied:
** ^The pointers returned are valid until a type conversion occurs as
** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
** [sqlite3_finalize()] is called. ^The memory space used to hold strings
-** and BLOBs is freed automatically. Do <em>not</em> pass the pointers returned
+** and BLOBs is freed automatically. Do not pass the pointers returned
** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].
**
** pointer. Subsequent calls to [sqlite3_errcode()] will return
** [SQLITE_NOMEM].)^
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
/*
** CAPI3REF: Destroy A Prepared Statement Object
** statement after it has been finalized can result in undefined and
** undesirable behavior such as segfaults and heap corruption.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Reset A Prepared Statement Object
** ^The [sqlite3_reset(S)] interface does not change the values
** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
/*
** CAPI3REF: Create Or Redefine SQL Functions
** close the database connection nor finalize or reset the prepared
** statement in which the function is running.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
sqlite3 *db,
const char *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
sqlite3 *db,
const void *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
sqlite3 *db,
const char *zFunctionName,
int nArg,
** these functions, we will not explain what they do.
*/
#ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
void*,sqlite3_int64);
#endif
** CAPI3REF: Obtaining SQL Values
** METHOD: sqlite3_value
**
-** The C-language implementation of SQL functions and aggregates uses
-** this set of interface routines to access the parameter values on
-** the function or aggregate.
-**
-** The xFunc (for scalar functions) or xStep (for aggregates) parameters
-** to [sqlite3_create_function()] and [sqlite3_create_function16()]
-** define callbacks that implement the SQL functions and aggregates.
-** The 3rd parameter to these callbacks is an array of pointers to
-** [protected sqlite3_value] objects. There is one [sqlite3_value] object for
-** each parameter to the SQL function. These routines are used to
-** extract values from the [sqlite3_value] objects.
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_value_blob</b><td>→<td>BLOB value
+** <tr><td><b>sqlite3_value_double</b><td>→<td>REAL value
+** <tr><td><b>sqlite3_value_int</b><td>→<td>32-bit INTEGER value
+** <tr><td><b>sqlite3_value_int64</b><td>→<td>64-bit INTEGER value
+** <tr><td><b>sqlite3_value_pointer</b><td>→<td>Pointer value
+** <tr><td><b>sqlite3_value_text</b><td>→<td>UTF-8 TEXT value
+** <tr><td><b>sqlite3_value_text16</b><td>→<td>UTF-16 TEXT value in
+** the native byteorder
+** <tr><td><b>sqlite3_value_text16be</b><td>→<td>UTF-16be TEXT value
+** <tr><td><b>sqlite3_value_text16le</b><td>→<td>UTF-16le TEXT value
+** <tr><td> <td> <td>
+** <tr><td><b>sqlite3_value_bytes</b><td>→<td>Size of a BLOB
+** or a UTF-8 TEXT in bytes
+** <tr><td><b>sqlite3_value_bytes16 </b>
+** <td>→ <td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_value_type</b><td>→<td>Default
+** datatype of the value
+** <tr><td><b>sqlite3_value_numeric_type </b>
+** <td>→ <td>Best numeric datatype of the value
+** <tr><td><b>sqlite3_value_nochange </b>
+** <td>→ <td>True if the column is unchanged in an UPDATE
+** against a virtual table.
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
+** These routines extract type, size, and content information from
+** [protected sqlite3_value] objects. Protected sqlite3_value objects
+** are used to pass parameter information into implementation of
+** [application-defined SQL functions] and [virtual tables].
**
** These routines work only with [protected sqlite3_value] objects.
** Any attempt to use these routines on an [unprotected sqlite3_value]
-** object results in undefined behavior.
+** is not threadsafe.
**
** ^These routines work just like the corresponding [column access functions]
** except that these routines take a single [protected sqlite3_value] object
** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
** extract UTF-16 strings as big-endian and little-endian respectively.
**
+** ^If [sqlite3_value] object V was initialized
+** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)]
+** and if X and Y are strings that compare equal according to strcmp(X,Y),
+** then sqlite3_value_pointer(V,Y) will return the pointer P. ^Otherwise,
+** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
+** ^(The sqlite3_value_type(V) interface returns the
+** [SQLITE_INTEGER | datatype code] for the initial datatype of the
+** [sqlite3_value] object V. The returned value is one of [SQLITE_INTEGER],
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].)^
+** Other interfaces might change the datatype for an sqlite3_value object.
+** For example, if the datatype is initially SQLITE_INTEGER and
+** sqlite3_value_text(V) is called to extract a text value for that
+** integer, then subsequent calls to sqlite3_value_type(V) might return
+** SQLITE_TEXT. Whether or not a persistent internal datatype conversion
+** occurs is undefined and may change from one release of SQLite to the next.
+**
** ^(The sqlite3_value_numeric_type() interface attempts to apply
** numeric affinity to the value. This means that an attempt is
** made to convert the value to an integer or floating point. If
** then the conversion is performed. Otherwise no conversion occurs.
** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
**
+** ^Within the [xUpdate] method of a [virtual table], the
+** sqlite3_value_nochange(X) interface returns true if and only if
+** the column corresponding to X is unchanged by the UPDATE operation
+** that the xUpdate method call was invoked to implement and if
+** and the prior [xColumn] method call that was invoked to extracted
+** the value for that column returned without setting a result (probably
+** because it queried [sqlite3_vtab_nochange()] and found that the column
+** was unchanging). ^Within an [xUpdate] method, any value for which
+** sqlite3_value_nochange(X) is true will in all other respects appear
+** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other
+** than within an [xUpdate] method call for an UPDATE statement, then
+** the return value is arbitrary and meaningless.
+**
** Please pay particular attention to the fact that the pointer returned
** from [sqlite3_value_blob()], [sqlite3_value_text()], or
** [sqlite3_value_text16()] can be invalidated by a subsequent call to
** These routines must be called from the same thread as
** the SQL function that supplied the [sqlite3_value*] parameters.
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API void *sqlite3_value_pointer(sqlite3_value*, const char*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_nochange(sqlite3_value*);
/*
** CAPI3REF: Finding The Subtype Of SQL Values
** information can be used to pass a limited amount of context from
** one SQL function to another. Use the [sqlite3_result_subtype()]
** routine to set the subtype for the return value of an SQL function.
-**
-** SQLite makes no use of subtype itself. It merely passes the subtype
-** from the result of one [application-defined SQL function] into the
-** input of another.
*/
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
/*
** CAPI3REF: Copy And Free SQL Values
** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
** then sqlite3_value_free(V) is a harmless no-op.
*/
-SQLITE_API SQLITE_EXPERIMENTAL sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
/*
** CAPI3REF: Obtain Aggregate Function Context
** This routine must be called from the same thread in which
** the aggregate SQL function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
/*
** CAPI3REF: User Data For Functions
** This routine must be called from the same thread in which
** the application-defined function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
/*
** CAPI3REF: Database Connection For Functions
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
/*
** CAPI3REF: Function Auxiliary Data
** the compiled regular expression can be reused on multiple
** invocations of the same function.
**
-** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
-** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. ^If there is no metadata
-** associated with the function argument, this sqlite3_get_auxdata() interface
+** ^The sqlite3_get_auxdata(C,N) interface returns a pointer to the metadata
+** associated by the sqlite3_set_auxdata(C,N,P,X) function with the Nth argument
+** value to the application-defined function. ^N is zero for the left-most
+** function argument. ^If there is no metadata
+** associated with the function argument, the sqlite3_get_auxdata(C,N) interface
** returns a NULL pointer.
**
** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
** SQLite will invoke the destructor function X with parameter P exactly
** once, when the metadata is discarded.
** SQLite is free to discard the metadata at any time, including: <ul>
-** <li> when the corresponding function parameter changes, or
-** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
-** SQL statement, or
-** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
-** <li> during the original sqlite3_set_auxdata() call when a memory
-** allocation error occurs. </ul>)^
+** <li> ^(when the corresponding function parameter changes)^, or
+** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+** SQL statement)^, or
+** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
+** parameter)^, or
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+** allocation error occurs.)^ </ul>
**
** Note the last bullet in particular. The destructor X in
** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
** function parameters that are compile-time constants, including literal
** values and [parameters] and expressions composed from the same.)^
**
+** The value of the N parameter to these interfaces should be non-negative.
+** Future enhancements may make use of negative N values to define new
+** kinds of function caching behavior.
+**
** These routines must be called from the same thread in which
** the SQL function is running.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
/*
** when it has finished using that result.
** ^If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
-** then SQLite makes a copy of the result into space obtained from
+** then SQLite makes a copy of the result into space obtained
** from [sqlite3_malloc()] before it returns.
**
** ^The sqlite3_result_value() interface sets the result of
** [unprotected sqlite3_value] object is required, so either
** kind of [sqlite3_value] object can be used with this interface.
**
+** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an
+** SQL NULL value, just like [sqlite3_result_null(C)], except that it
+** also associates the host-language pointer P or type T with that
+** NULL value such that the pointer can be retrieved within an
+** [application-defined SQL function] using [sqlite3_value_pointer()].
+** ^If the D parameter is not NULL, then it is a pointer to a destructor
+** for the P parameter. ^SQLite invokes D with P as its only argument
+** when SQLite is finished with P. The T parameter should be a static
+** string and preferably a string literal. The sqlite3_result_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
** If these routines are called from within the different thread
** than the one containing the application-defined function that received
** the [sqlite3_context] pointer, the results are undefined.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_pointer(sqlite3_context*, void*,const char*,void(*)(void*));
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
/*
** The number of subtype bytes preserved by SQLite might increase
** in future releases of SQLite.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
/*
** CAPI3REF: Define New Collating Sequences
**
** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
sqlite3*,
const char *zName,
int eTextRep,
void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
sqlite3*,
const char *zName,
int eTextRep,
int(*xCompare)(void*,int,const void*,int,const void*),
void(*xDestroy)(void*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
sqlite3*,
const void *zName,
int eTextRep,
** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
** [sqlite3_create_collation_v2()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const char*)
);
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const void*)
** The code to implement this API is not available in the public release
** of SQLite.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The key */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
sqlite3 *db, /* Database to be rekeyed */
const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The key */
** The code to implement this API is not available in the public release
** of SQLite.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
sqlite3 *db, /* Database to be rekeyed */
const void *pKey, int nKey /* The new key */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
sqlite3 *db, /* Database to be rekeyed */
const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The new key */
** Specify the activation key for a SEE database. Unless
** activated, none of the SEE routines will work.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
const char *zPassPhrase /* Activation phrase */
);
#endif
** Specify the activation key for a CEROD database. Unless
** activated, none of the CEROD routines will work.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
const char *zPassPhrase /* Activation phrase */
);
#endif
** all, then the behavior of sqlite3_sleep() may deviate from the description
** in the previous paragraphs.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
/*
** CAPI3REF: Name Of The Folder Holding Temporary Files
** connection while this routine is running, then the return value
** is undefined.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
/*
** CAPI3REF: Find The Database Handle Of A Prepared Statement
** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
** create the statement in the first place.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
/*
** CAPI3REF: Return The Filename For A Database Connection
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
/*
** CAPI3REF: Determine if a database is read-only
** of connection D is read-only, 0 if it is read/write, or -1 if N is not
** the name of a database on connection D.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
/*
** CAPI3REF: Find the next prepared statement
** [sqlite3_next_stmt(D,S)] must refer to an open database
** connection and in particular must not be a NULL pointer.
*/
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
/*
** CAPI3REF: Commit And Rollback Notification Callbacks
**
** See also the [sqlite3_update_hook()] interface.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
/*
** CAPI3REF: Data Change Notification Callbacks
** ^The sqlite3_update_hook() interface registers a callback function
** with the [database connection] identified by the first argument
** to be invoked whenever a row is updated, inserted or deleted in
-** a rowid table.
+** a [rowid table].
** ^Any callback set by a previous call to this function
** for the same database connection is overridden.
**
** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
**
** ^In the current implementation, the update hook
-** is not invoked when duplication rows are deleted because of an
+** is not invoked when conflicting rows are deleted because of an
** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook
** invoked when rows are deleted using the [truncate optimization].
** The exceptions defined in this paragraph might change in a future
** on the same [database connection] D, or NULL for
** the first call on D.
**
-** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
-** interfaces.
+** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
+** and [sqlite3_preupdate_hook()] interfaces.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
sqlite3*,
void(*)(void *,int ,char const *,char const *,sqlite3_int64),
void*
** and disabled if the argument is false.)^
**
** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
** ^(The cache sharing mode set by this interface effects all subsequent
**
** See Also: [SQLite Shared-Cache Mode]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
/*
** CAPI3REF: Attempt To Free Heap Memory
**
** See also: [sqlite3_db_release_memory()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
/*
** CAPI3REF: Free Memory Used By A Database Connection
**
** See also: [sqlite3_release_memory()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
/*
** CAPI3REF: Impose A Limit On Heap Size
** from the heap.
** </ul>)^
**
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** the soft heap limit is enforced
** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
** the soft heap limit is enforced on every memory allocation. Without
** The circumstances under which SQLite will enforce the soft heap limit may
** changes in future releases of SQLite.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
/*
** CAPI3REF: Deprecated Soft Heap Limit Interface
** only. All new applications should use the
** [sqlite3_soft_heap_limit64()] interface rather than this one.
*/
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
/*
** column exists. ^The sqlite3_table_column_metadata() interface returns
** SQLITE_ERROR and if the specified column does not exist.
** ^If the column-name parameter to sqlite3_table_column_metadata() is a
-** NULL pointer, then this routine simply checks for the existance of the
+** NULL pointer, then this routine simply checks for the existence of the
** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
-** does not.
+** does not. If the table name parameter T in a call to
+** sqlite3_table_column_metadata(X,D,T,C,...) is NULL then the result is
+** undefined behavior.
**
** ^The column is identified by the second, third and fourth parameters to
** this function. ^(The second parameter is either the name of the database
** parsed, if that has not already been done, and returns an error if
** any errors are encountered while loading the schema.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
sqlite3 *db, /* Connection handle */
const char *zDbName, /* Database name or NULL */
const char *zTableName, /* Table name */
** should free this memory by calling [sqlite3_free()].
**
** ^Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
+** [sqlite3_enable_load_extension()] or
+** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
+** prior to calling this API,
** otherwise an error will be returned.
**
+** <b>Security warning:</b> It is recommended that the
+** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
+** interface. The use of the [sqlite3_enable_load_extension()] interface
+** should be avoided. This will keep the SQL function [load_extension()]
+** disabled and prevent SQL injections from giving attackers
+** access to extension loading capabilities.
+**
** See also the [load_extension() SQL function].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Derived from zFile if 0 */
** ^Call the sqlite3_enable_load_extension() routine with onoff==1
** to turn extension loading on and call it with onoff==0 to turn
** it back off again.
+**
+** ^This interface enables or disables both the C-API
+** [sqlite3_load_extension()] and the SQL function [load_extension()].
+** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
+** to enable or disable only the C-API.)^
+**
+** <b>Security warning:</b> It is recommended that extension loading
+** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
+** rather than this interface, so the [load_extension()] SQL function
+** remains disabled. This will prevent SQL injections from giving attackers
+** access to extension loading capabilities.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
/*
** CAPI3REF: Automatically Load Statically Linked Extensions
**
** ^(Even though the function prototype shows that xEntryPoint() takes
** no arguments and returns void, SQLite invokes xEntryPoint() with three
-** arguments and expects and integer result as if the signature of the
+** arguments and expects an integer result as if the signature of the
** entry point where as follows:
**
** <blockquote><pre>
** See also: [sqlite3_reset_auto_extension()]
** and [sqlite3_cancel_auto_extension()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
/*
** CAPI3REF: Cancel Automatic Extension Loading
** unregistered and it returns 0 if X was not on the list of initialization
** routines.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
/*
** CAPI3REF: Reset Automatic Extension Loading
** ^This interface disables all automatic extensions previously
** registered using [sqlite3_auto_extension()].
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
/*
** The interface to the virtual-table mechanism is currently considered
** ^Information about the ORDER BY clause is stored in aOrderBy[].
** ^Each term of aOrderBy records a column of the ORDER BY clause.
**
+** The colUsed field indicates which columns of the virtual table may be
+** required by the current scan. Virtual table columns are numbered from
+** zero in the order in which they appear within the CREATE TABLE statement
+** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
+** the corresponding bit is set within the colUsed mask if the column may be
+** required by SQLite. If the table has at least 64 columns and any column
+** to the right of the first 63 is required, then bit 63 of colUsed is also
+** set. In other words, column iCol may be required if the expression
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** non-zero.
+**
** The [xBestIndex] method must fill aConstraintUsage[] with information
** about what parameters to pass to xFilter. ^If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated
** the xUpdate method are automatically rolled back by SQLite.
**
** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** If a virtual table extension is
** used with an SQLite version earlier than 3.8.2, the results of attempting
** to read or write the estimatedRows field are undefined (but are likely
** to included crashing the application). The estimatedRows field should
** therefore only be used if [sqlite3_libversion_number()] returns a
** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]).
+** It may therefore only be used if
** sqlite3_libversion_number() returns a value greater than or equal to
** 3009000.
*/
/* Inputs */
int nConstraint; /* Number of entries in aConstraint */
struct sqlite3_index_constraint {
- int iColumn; /* Column on left-hand side of constraint */
+ int iColumn; /* Column constrained. -1 for ROWID */
unsigned char op; /* Constraint operator */
unsigned char usable; /* True if this constraint is usable */
int iTermOffset; /* Used internally - xBestIndex should ignore */
sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
/* Fields below are only available in SQLite 3.9.0 and later */
int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */
+ /* Fields below are only available in SQLite 3.10.0 and later */
+ sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */
};
/*
** an operator that is part of a constraint term in the wHERE clause of
** a query that uses a [virtual table].
*/
-#define SQLITE_INDEX_CONSTRAINT_EQ 2
-#define SQLITE_INDEX_CONSTRAINT_GT 4
-#define SQLITE_INDEX_CONSTRAINT_LE 8
-#define SQLITE_INDEX_CONSTRAINT_LT 16
-#define SQLITE_INDEX_CONSTRAINT_GE 32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_EQ 2
+#define SQLITE_INDEX_CONSTRAINT_GT 4
+#define SQLITE_INDEX_CONSTRAINT_LE 8
+#define SQLITE_INDEX_CONSTRAINT_LT 16
+#define SQLITE_INDEX_CONSTRAINT_GE 32
+#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_LIKE 65
+#define SQLITE_INDEX_CONSTRAINT_GLOB 66
+#define SQLITE_INDEX_CONSTRAINT_REGEXP 67
+#define SQLITE_INDEX_CONSTRAINT_NE 68
+#define SQLITE_INDEX_CONSTRAINT_ISNOT 69
+#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70
+#define SQLITE_INDEX_CONSTRAINT_ISNULL 71
+#define SQLITE_INDEX_CONSTRAINT_IS 72
/*
** CAPI3REF: Register A Virtual Table Implementation
** interface is equivalent to sqlite3_create_module_v2() with a NULL
** destructor.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *p, /* Methods for the module */
void *pClientData /* Client data for xCreate/xConnect */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
const sqlite3_module *p, /* Methods for the module */
** to declare the format (the names and datatypes of the columns) of
** the virtual tables they implement.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
/*
** CAPI3REF: Overload A Function For A Virtual Table
** purpose is to be a placeholder function that can be overloaded
** by a [virtual table].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
/*
** The interface to the virtual-table mechanism defined above (back up
** [database connection] error code and message accessible via
** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
**
+** A BLOB referenced by sqlite3_blob_open() may be read using the
+** [sqlite3_blob_read()] interface and modified by using
+** [sqlite3_blob_write()]. The [BLOB handle] can be moved to a
+** different row of the same table using the [sqlite3_blob_reopen()]
+** interface. However, the column, table, or database of a [BLOB handle]
+** cannot be changed after the [BLOB handle] is opened.
**
** ^(If the row that a BLOB handle points to is modified by an
** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
**
** To avoid a resource leak, every open [BLOB handle] should eventually
** be released by a call to [sqlite3_blob_close()].
+**
+** See also: [sqlite3_blob_close()],
+** [sqlite3_blob_reopen()], [sqlite3_blob_read()],
+** [sqlite3_blob_bytes()], [sqlite3_blob_write()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
sqlite3*,
const char *zDb,
const char *zTable,
** CAPI3REF: Move a BLOB Handle to a New Row
** METHOD: sqlite3_blob
**
-** ^This function is used to move an existing blob handle so that it points
+** ^This function is used to move an existing [BLOB handle] so that it points
** to a different row of the same database table. ^The new row is identified
** by the rowid value passed as the second argument. Only the row can be
** changed. ^The database, table and column on which the blob handle is open
-** remain the same. Moving an existing blob handle to a new row can be
+** remain the same. Moving an existing [BLOB handle] to a new row is
** faster than closing the existing handle and opening a new one.
**
** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
**
** ^This function sets the database handle error code and message.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
/*
** CAPI3REF: Close A BLOB Handle
** is passed a valid open blob handle, the values returned by the
** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
/*
** CAPI3REF: Return The Size Of An Open BLOB
** been closed by [sqlite3_blob_close()]. Passing any other pointer in
** to this routine results in undefined and probably undesirable behavior.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
/*
** CAPI3REF: Read Data From A BLOB Incrementally
**
** See also: [sqlite3_blob_write()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
/*
** CAPI3REF: Write Data Into A BLOB Incrementally
**
** See also: [sqlite3_blob_read()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
/*
** CAPI3REF: Virtual File System Objects
** ^(If the default VFS is unregistered, another VFS is chosen as
** the default. The choice for the new VFS is arbitrary.)^
*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
/*
** CAPI3REF: Mutexes
**
** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
/*
** CAPI3REF: Mutex Methods Object
** interface should also return 1 when given a NULL pointer.
*/
#ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
#endif
/*
#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */
#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_randomness() */
#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */
#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */
** ^If the [threading mode] is Single-thread or Multi-thread then this
** routine returns a NULL pointer.
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
/*
** CAPI3REF: Low-Level Control Of Database Files
** the xFileControl method. ^The return value of the xFileControl
** method becomes the return value of this routine.
**
-** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
+** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes
** a pointer to the underlying [sqlite3_file] object to be written into
-** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER
+** the space pointed to by the 4th parameter. ^The [SQLITE_FCNTL_FILE_POINTER]
** case is a short-circuit path which does not actually invoke the
** underlying sqlite3_io_methods.xFileControl method.
**
** an incorrect zDbName and an SQLITE_ERROR return from the underlying
** xFileControl method.
**
-** See also: [SQLITE_FCNTL_LOCKSTATE]
+** See also: [file control opcodes]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
/*
** CAPI3REF: Testing Interface
** Unlike most of the SQLite API, this function is not guaranteed to
** operate consistently from one release to the next.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
/*
** CAPI3REF: Testing Interface Operation Codes
#define SQLITE_TESTCTRL_RESERVE 14
#define SQLITE_TESTCTRL_OPTIMIZATIONS 15
#define SQLITE_TESTCTRL_ISKEYWORD 16
-#define SQLITE_TESTCTRL_SCRATCHMALLOC 17
+#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */
#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19
#define SQLITE_TESTCTRL_NEVER_CORRUPT 20
#define SQLITE_TESTCTRL_VDBE_COVERAGE 21
#define SQLITE_TESTCTRL_BYTEORDER 22
#define SQLITE_TESTCTRL_ISINIT 23
#define SQLITE_TESTCTRL_SORTER_MMAP 24
#define SQLITE_TESTCTRL_IMPOSTER 25
-#define SQLITE_TESTCTRL_LAST 25
+#define SQLITE_TESTCTRL_PARSER_COVERAGE 26
+#define SQLITE_TESTCTRL_LAST 26 /* Largest TESTCTRL */
/*
** CAPI3REF: SQLite Runtime Status
**
** See also: [sqlite3_db_status()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
int op,
sqlite3_int64 *pCurrent,
sqlite3_int64 *pHighwater,
** <dd>This parameter is the current amount of memory checked out
** using [sqlite3_malloc()], either directly or indirectly. The
** figure includes calls made to [sqlite3_malloc()] by the application
-** and internal memory usage by the SQLite library. Scratch memory
-** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
+** and internal memory usage by the SQLite library. Auxiliary page-cache
** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
** this parameter. The amount returned is the sum of the allocation
** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
** *pHighwater parameter to [sqlite3_status()] is of interest.
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
-** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
-** <dd>This parameter returns the number of allocations used out of the
-** [scratch memory allocator] configured using
-** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
-** in bytes. Since a single thread may only have one scratch allocation
-** outstanding at time, this parameter also reports the number of threads
-** using scratch memory at the same time.</dd>)^
+** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt>
+** <dd>No longer used.</dd>
**
** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
-** <dd>This parameter returns the number of bytes of scratch memory
-** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The values
-** returned include overflows because the requested allocation was too
-** larger (that is, because the requested allocation was larger than the
-** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
-** slots were available.
-** </dd>)^
-**
-** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [scratch memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>)^
+** <dd>No longer used.</dd>
+**
+** [[SQLITE_STATUS_SCRATCH_SIZE]] <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
+** <dd>No longer used.</dd>
**
** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack. It is only
+** <dd>The *pHighwater parameter records the deepest parser stack.
+** The *pCurrent value is undefined. The *pHighwater value is only
** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>
**
#define SQLITE_STATUS_MEMORY_USED 0
#define SQLITE_STATUS_PAGECACHE_USED 1
#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2
-#define SQLITE_STATUS_SCRATCH_USED 3
-#define SQLITE_STATUS_SCRATCH_OVERFLOW 4
+#define SQLITE_STATUS_SCRATCH_USED 3 /* NOT USED */
+#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 /* NOT USED */
#define SQLITE_STATUS_MALLOC_SIZE 5
#define SQLITE_STATUS_PARSER_STACK 6
#define SQLITE_STATUS_PAGECACHE_SIZE 7
-#define SQLITE_STATUS_SCRATCH_SIZE 8
+#define SQLITE_STATUS_SCRATCH_SIZE 8 /* NOT USED */
#define SQLITE_STATUS_MALLOC_COUNT 9
/*
**
** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
/*
** CAPI3REF: Status Parameters for database connections
** memory used by all pager caches associated with the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
**
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
+** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
+** pager cache is shared between two or more connections the bytes of heap
+** memory used by that pager cache is divided evenly between the attached
+** connections.)^ In other words, if none of the pager caches associated
+** with the database connection are shared, this request returns the same
+** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
+** shared, the value returned by this call will be smaller than that returned
+** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
+** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
+**
** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** memory used to store the schema for all databases associated
** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
** </dd>
**
+** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(<dt>SQLITE_DBSTATUS_CACHE_SPILL</dt>
+** <dd>This parameter returns the number of dirty cache entries that have
+** been written to disk in the middle of a transaction due to the page
+** cache overflowing. Transactions are more efficient if they are written
+** to disk all at once. When pages spill mid-transaction, that introduces
+** additional overhead. This parameter can be used help identify
+** inefficiencies that can be resolve by increasing the cache size.
+** </dd>
+**
** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
** <dd>This parameter returns zero for the current value if and only if
** all foreign key constraints (deferred or immediate) have been
#define SQLITE_DBSTATUS_CACHE_MISS 8
#define SQLITE_DBSTATUS_CACHE_WRITE 9
#define SQLITE_DBSTATUS_DEFERRED_FKS 10
-#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_USED_SHARED 11
+#define SQLITE_DBSTATUS_CACHE_SPILL 12
+#define SQLITE_DBSTATUS_MAX 12 /* Largest defined DBSTATUS */
/*
**
** See also: [sqlite3_status()] and [sqlite3_db_status()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
/*
** CAPI3REF: Status Parameters for prepared statements
** used as a proxy for the total work done by the prepared statement.
** If the number of virtual machine operations exceeds 2147483647
** then the value returned by this statement status code is undefined.
+**
+** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt>
+** <dd>^This is the number of times that the prepare statement has been
+** automatically regenerated due to schema changes or change to
+** [bound parameters] that might affect the query plan.
+**
+** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt>
+** <dd>^This is the number of times that the prepared statement has
+** been run. A single "run" for the purposes of this counter is one
+** or more calls to [sqlite3_step()] followed by a call to [sqlite3_reset()].
+** The counter is incremented on the first [sqlite3_step()] call of each
+** cycle.
+**
+** [[SQLITE_STMTSTATUS_MEMUSED]] <dt>SQLITE_STMTSTATUS_MEMUSED</dt>
+** <dd>^This is the approximate number of bytes of heap memory
+** used to store the prepared statement. ^This value is not actually
+** a counter, and so the resetFlg parameter to sqlite3_stmt_status()
+** is ignored when the opcode is SQLITE_STMTSTATUS_MEMUSED.
** </dd>
** </dl>
*/
#define SQLITE_STMTSTATUS_SORT 2
#define SQLITE_STMTSTATUS_AUTOINDEX 3
#define SQLITE_STMTSTATUS_VM_STEP 4
+#define SQLITE_STMTSTATUS_REPREPARE 5
+#define SQLITE_STMTSTATUS_RUN 6
+#define SQLITE_STMTSTATUS_MEMUSED 99
/*
** CAPI3REF: Custom Page Cache Object
** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
** an error.
**
-** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if
** there is already a read or read-write transaction open on the
** destination database.
**
** same time as another thread is invoking sqlite3_backup_step() it is
** possible that they return invalid values.
*/
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
sqlite3 *pDest, /* Destination database handle */
const char *zDestName, /* Destination database name */
sqlite3 *pSource, /* Source database handle */
const char *zSourceName /* Source database name */
);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
/*
** CAPI3REF: Unlock Notification
** the special "DROP TABLE/INDEX" case, the extended error code is just
** SQLITE_LOCKED.)^
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
sqlite3 *pBlocked, /* Waiting connection */
void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
void *pNotifyArg /* Argument to pass to xNotify */
** strings in a case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
/*
** CAPI3REF: String Globbing
*
-** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
-** the glob pattern P, and it returns non-zero if string X does not match
-** the glob pattern P. ^The definition of glob pattern matching used in
+** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
+** string X matches the [GLOB] pattern P.
+** ^The definition of [GLOB] pattern matching used in
** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
-** SQL dialect used by SQLite. ^The sqlite3_strglob(P,X) function is case
-** sensitive.
+** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function
+** is case sensitive.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strlike()].
+*/
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
+
+/*
+** CAPI3REF: String LIKE Matching
+*
+** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
+** string X matches the [LIKE] pattern P with escape character E.
+** ^The definition of [LIKE] pattern matching used in
+** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
+** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without
+** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
+** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
+** insensitive - equivalent upper and lower case ASCII characters match
+** one another.
+**
+** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
+** only ASCII characters are case folded.
**
** Note that this routine returns zero on a match and non-zero if the strings
** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strglob()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
/*
** CAPI3REF: Error Logging Interface
** a few hundred characters, it will be truncated to the length of the
** buffer.
*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
/*
** CAPI3REF: Write-Ahead Log Commit Hook
** previously registered write-ahead log callback. ^Note that the
** [sqlite3_wal_autocheckpoint()] interface and the
** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** those overwrite any prior [sqlite3_wal_hook()] settings.
+** overwrite any prior [sqlite3_wal_hook()] settings.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
sqlite3*,
int(*)(void *,sqlite3*,const char*,int),
void*
** is only necessary if the default setting is found to be suboptimal
** for a particular application.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
/*
** CAPI3REF: Checkpoint a database
** start a callback but which do not need the full power (and corresponding
** complication) of [sqlite3_wal_checkpoint_v2()].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
/*
** CAPI3REF: Checkpoint a database
** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
** from SQL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
sqlite3 *db, /* Database handle */
const char *zDb, /* Name of attached database (or NULL) */
int eMode, /* SQLITE_CHECKPOINT_* value */
** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options
** may be added in the future.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
/*
** CAPI3REF: Virtual Table Configuration Options
** of the SQL statement that triggered the call to the [xUpdate] method of the
** [virtual table].
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
+
+/*
+** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE
+**
+** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn]
+** method of a [virtual table], then it returns true if and only if the
+** column is being fetched as part of an UPDATE operation during which the
+** column value will not change. Applications might use this to substitute
+** a lighter-weight value to return that the corresponding [xUpdate] method
+** understands as a "no-change" value.
+**
+** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that
+** the column is not changed by the UPDATE statement, they the xColumn
+** method can optionally return without setting a result, without calling
+** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces].
+** In that case, [sqlite3_value_nochange(X)] will return true for the
+** same column in the [xUpdate] method.
+*/
+SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*);
+
+/*
+** CAPI3REF: Determine The Collation For a Virtual Table Constraint
+**
+** This function may only be called from within a call to the [xBestIndex]
+** method of a [virtual table].
+**
+** The first argument must be the sqlite3_index_info object that is the
+** first parameter to the xBestIndex() method. The second argument must be
+** an index into the aConstraint[] array belonging to the sqlite3_index_info
+** structure passed to xBestIndex. This function returns a pointer to a buffer
+** containing the name of the collation sequence for the corresponding
+** constraint.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int);
/*
** CAPI3REF: Conflict resolution modes
**
** See also: [sqlite3_stmt_scanstatus_reset()]
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
sqlite3_stmt *pStmt, /* Prepared statement for which info desired */
int idx, /* Index of loop to report on */
int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
** This API is only available if the library is built with pre-processor
** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+
+/*
+** CAPI3REF: Flush caches to disk mid-transaction
+**
+** ^If a write-transaction is open on [database connection] D when the
+** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
+** pages in the pager-cache that are not currently in use are written out
+** to disk. A dirty page may be in use if a database cursor created by an
+** active SQL statement is reading from it, or if it is page 1 of a database
+** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
+** interface flushes caches for all schemas - "main", "temp", and
+** any [attached] databases.
+**
+** ^If this function needs to obtain extra database locks before dirty pages
+** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** immediately and there is a busy-handler callback configured, it is invoked
+** in the usual manner. ^If the required lock still cannot be obtained, then
+** the database is skipped and an attempt made to flush any dirty pages
+** belonging to the next (if any) database. ^If any databases are skipped
+** because locks cannot be obtained, but no other error occurs, this
+** function returns SQLITE_BUSY.
+**
+** ^If any other error occurs while flushing dirty pages to disk (for
+** example an IO error or out-of-memory condition), then processing is
+** abandoned and an SQLite [error code] is returned to the caller immediately.
+**
+** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
+**
+** ^This function does not set the database handle error code or message
+** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
+*/
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: The pre-update hook.
+**
+** ^These interfaces are only available if SQLite is compiled using the
+** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
+**
+** ^The [sqlite3_preupdate_hook()] interface registers a callback function
+** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
+** on a database table.
+** ^At most one preupdate hook may be registered at a time on a single
+** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
+** the previous setting.
+** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
+** with a NULL pointer as the second parameter.
+** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
+** the first parameter to callbacks.
+**
+** ^The preupdate hook only fires for changes to real database tables; the
+** preupdate hook is not invoked for changes to [virtual tables] or to
+** system tables like sqlite_master or sqlite_stat1.
+**
+** ^The second parameter to the preupdate callback is a pointer to
+** the [database connection] that registered the preupdate hook.
+** ^The third parameter to the preupdate callback is one of the constants
+** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
+** kind of update operation that is about to occur.
+** ^(The fourth parameter to the preupdate callback is the name of the
+** database within the database connection that is being modified. This
+** will be "main" for the main database or "temp" for TEMP tables or
+** the name given after the AS keyword in the [ATTACH] statement for attached
+** databases.)^
+** ^The fifth parameter to the preupdate callback is the name of the
+** table that is being modified.
+**
+** For an UPDATE or DELETE operation on a [rowid table], the sixth
+** parameter passed to the preupdate callback is the initial [rowid] of the
+** row being modified or deleted. For an INSERT operation on a rowid table,
+** or any operation on a WITHOUT ROWID table, the value of the sixth
+** parameter is undefined. For an INSERT or UPDATE on a rowid table the
+** seventh parameter is the final rowid value of the row being inserted
+** or updated. The value of the seventh parameter passed to the callback
+** function is not defined for operations on WITHOUT ROWID tables, or for
+** INSERT operations on rowid tables.
+**
+** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
+** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
+** provide additional information about a preupdate event. These routines
+** may only be called from within a preupdate callback. Invoking any of
+** these routines from outside of a preupdate callback or with a
+** [database connection] pointer that is different from the one supplied
+** to the preupdate callback results in undefined and probably undesirable
+** behavior.
+**
+** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
+** in the row that is being inserted, updated, or deleted.
+**
+** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row before it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
+** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row after it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
+** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
+** callback was invoked as a result of a direct insert, update, or delete
+** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** triggers; or 2 for changes resulting from triggers called by top-level
+** triggers; and so forth.
+**
+** See also: [sqlite3_update_hook()]
+*/
+#if defined(SQLITE_ENABLE_PREUPDATE_HOOK)
+SQLITE_API void *sqlite3_preupdate_hook(
+ sqlite3 *db,
+ void(*xPreUpdate)(
+ void *pCtx, /* Copy of third arg to preupdate_hook() */
+ sqlite3 *db, /* Database handle */
+ int op, /* SQLITE_UPDATE, DELETE or INSERT */
+ char const *zDb, /* Database name */
+ char const *zName, /* Table name */
+ sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
+ sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
+ ),
+ void*
+);
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+#endif
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most recent I/O error or failure to open a file.
+** The return value is OS-dependent. For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.
+*/
+SQLITE_API int sqlite3_system_errno(sqlite3*);
+
+/*
+** CAPI3REF: Database Snapshot
+** KEYWORDS: {snapshot} {sqlite3_snapshot}
+** EXPERIMENTAL
+**
+** An instance of the snapshot object records the state of a [WAL mode]
+** database for some specific point in history.
+**
+** In [WAL mode], multiple [database connections] that are open on the
+** same database file can each be reading a different historical version
+** of the database file. When a [database connection] begins a read
+** transaction, that connection sees an unchanging copy of the database
+** as it existed for the point in time when the transaction first started.
+** Subsequent changes to the database from other connections are not seen
+** by the reader until a new read transaction is started.
+**
+** The sqlite3_snapshot object records state information about an historical
+** version of the database file so that it is possible to later open a new read
+** transaction that sees that historical version of the database rather than
+** the most recent version.
+**
+** The constructor for this object is [sqlite3_snapshot_get()]. The
+** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
+** to an historical snapshot (if possible). The destructor for
+** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
+*/
+typedef struct sqlite3_snapshot {
+ unsigned char hidden[48];
+} sqlite3_snapshot;
+
+/*
+** CAPI3REF: Record A Database Snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
+** new [sqlite3_snapshot] object that records the current state of
+** schema S in database connection D. ^On success, the
+** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
+** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
+** If there is not already a read-transaction open on schema S when
+** this function is called, one is opened automatically.
+**
+** The following must be true for this function to succeed. If any of
+** the following statements are false when sqlite3_snapshot_get() is
+** called, SQLITE_ERROR is returned. The final value of *P is undefined
+** in this case.
+**
+** <ul>
+** <li> The database handle must be in [autocommit mode].
+**
+** <li> Schema S of [database connection] D must be a [WAL mode] database.
+**
+** <li> There must not be a write transaction open on schema S of database
+** connection D.
+**
+** <li> One or more transactions must have been written to the current wal
+** file since it was created on disk (by any connection). This means
+** that a snapshot cannot be taken on a wal mode database with no wal
+** file immediately after it is first opened. At least one transaction
+** must be written to it first.
+** </ul>
+**
+** This function may also return SQLITE_NOMEM. If it is called with the
+** database handle in autocommit mode but fails for some other reason,
+** whether or not a read transaction is opened on schema S is undefined.
+**
+** The [sqlite3_snapshot] object returned from a successful call to
+** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
+** to avoid a memory leak.
+**
+** The [sqlite3_snapshot_get()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot **ppSnapshot
+);
+
+/*
+** CAPI3REF: Start a read transaction on an historical snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
+** read transaction for schema S of
+** [database connection] D such that the read transaction
+** refers to historical [snapshot] P, rather than the most
+** recent change to the database.
+** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
+** or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
+** the first operation following the [BEGIN] that takes the schema S
+** out of [autocommit mode].
+** ^In other words, schema S must not currently be in
+** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
+** database connection D must be out of [autocommit mode].
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
+** database connection D does not know that the database file for
+** schema S is in [WAL mode]. A database connection might not know
+** that the database file is in [WAL mode] if there has been no prior
+** I/O on that database connection, or if the database entered [WAL mode]
+** after the most recent I/O on the database connection.)^
+** (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
+**
+** The [sqlite3_snapshot_open()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot *pSnapshot
+);
+
+/*
+** CAPI3REF: Destroy a snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
+** The application must eventually free every [sqlite3_snapshot] object
+** using this routine to avoid a memory leak.
+**
+** The [sqlite3_snapshot_free()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
+
+/*
+** CAPI3REF: Compare the ages of two snapshot handles.
+** EXPERIMENTAL
+**
+** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
+** of two valid snapshot handles.
+**
+** If the two snapshot handles are not associated with the same database
+** file, the result of the comparison is undefined.
+**
+** Additionally, the result of the comparison is only valid if both of the
+** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
+** last time the wal file was deleted. The wal file is deleted when the
+** database is changed back to rollback mode or when the number of database
+** clients drops to zero. If either snapshot handle was obtained before the
+** wal file was last deleted, the value returned by this function
+** is undefined.
+**
+** Otherwise, this API returns a negative value if P1 refers to an older
+** snapshot than P2, zero if the two handles refer to the same database
+** snapshot, and a positive value if P1 is a newer snapshot than P2.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
+ sqlite3_snapshot *p1,
+ sqlite3_snapshot *p2
+);
+
+/*
+** CAPI3REF: Recover snapshots from a wal file
+** EXPERIMENTAL
+**
+** If all connections disconnect from a database file but do not perform
+** a checkpoint, the existing wal file is opened along with the database
+** file the next time the database is opened. At this point it is only
+** possible to successfully call sqlite3_snapshot_open() to open the most
+** recent snapshot of the database (the one at the head of the wal file),
+** even though the wal file may contain other valid snapshots for which
+** clients have sqlite3_snapshot handles.
+**
+** This function attempts to scan the wal file associated with database zDb
+** of database handle db and make all valid snapshots available to
+** sqlite3_snapshot_open(). It is an error if there is already a read
+** transaction open on the database, or if the database is not a wal mode
+** database.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
+
+/*
+** CAPI3REF: Serialize a database
+**
+** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory
+** that is a serialization of the S database on [database connection] D.
+** If P is not a NULL pointer, then the size of the database in bytes
+** is written into *P.
+**
+** For an ordinary on-disk database file, the serialization is just a
+** copy of the disk file. For an in-memory database or a "TEMP" database,
+** the serialization is the same sequence of bytes which would be written
+** to disk if that database where backed up to disk.
+**
+** The usual case is that sqlite3_serialize() copies the serialization of
+** the database into memory obtained from [sqlite3_malloc64()] and returns
+** a pointer to that memory. The caller is responsible for freeing the
+** returned value to avoid a memory leak. However, if the F argument
+** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations
+** are made, and the sqlite3_serialize() function will return a pointer
+** to the contiguous memory representation of the database that SQLite
+** is currently using for that database, or NULL if the no such contiguous
+** memory representation of the database exists. A contiguous memory
+** representation of the database will usually only exist if there has
+** been a prior call to [sqlite3_deserialize(D,S,...)] with the same
+** values of D and S.
+** The size of the database is written into *P even if the
+** SQLITE_SERIALIZE_NOCOPY bit is set but no contigious copy
+** of the database exists.
+**
+** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the
+** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory
+** allocation error occurs.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API unsigned char *sqlite3_serialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which DB to serialize. ex: "main", "temp", ... */
+ sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */
+ unsigned int mFlags /* Zero or more SQLITE_SERIALIZE_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3_serialize
+**
+** Zero or more of the following constants can be OR-ed together for
+** the F argument to [sqlite3_serialize(D,S,P,F)].
+**
+** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return
+** a pointer to contiguous in-memory database that it is currently using,
+** without making a copy of the database. If SQLite is not currently using
+** a contiguous in-memory database, then this option causes
+** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be
+** using a contiguous in-memory database if it has been initialized by a
+** prior call to [sqlite3_deserialize()].
+*/
+#define SQLITE_SERIALIZE_NOCOPY 0x001 /* Do no memory allocations */
+
+/*
+** CAPI3REF: Deserialize a database
+**
+** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the
+** [database connection] D to disconnect from database S and then
+** reopen S as an in-memory database based on the serialization contained
+** in P. The serialized database P is N bytes in size. M is the size of
+** the buffer P, which might be larger than N. If M is larger than N, and
+** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is
+** permitted to add content to the in-memory database as long as the total
+** size does not exceed M bytes.
+**
+** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will
+** invoke sqlite3_free() on the serialization buffer when the database
+** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then
+** SQLite will try to increase the buffer size using sqlite3_realloc64()
+** if writes on the database cause it to grow larger than M bytes.
+**
+** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the
+** database is currently in a read transaction or is involved in a backup
+** operation.
+**
+** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the
+** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then
+** [sqlite3_free()] is invoked on argument P prior to returning.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API int sqlite3_deserialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which DB to reopen with the deserialization */
+ unsigned char *pData, /* The serialized database content */
+ sqlite3_int64 szDb, /* Number bytes in the deserialization */
+ sqlite3_int64 szBuf, /* Total size of buffer pData[] */
+ unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */
+);
+/*
+** CAPI3REF: Flags for sqlite3_deserialize()
+**
+** The following are allowed values for 6th argument (the F argument) to
+** the [sqlite3_deserialize(D,S,P,N,M,F)] interface.
+**
+** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization
+** in the P argument is held in memory obtained from [sqlite3_malloc64()]
+** and that SQLite should take ownership of this memory and automatically
+** free it when it has finished using it. Without this flag, the caller
+** is resposible for freeing any dynamically allocated memory.
+**
+** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to
+** grow the size of the database using calls to [sqlite3_realloc64()]. This
+** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used.
+** Without this flag, the deserialized database cannot increase in size beyond
+** the number of bytes specified by the M parameter.
+**
+** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database
+** should be treated as read-only.
+*/
+#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */
+#define SQLITE_DESERIALIZE_RESIZEABLE 2 /* Resize using sqlite3_realloc64() */
+#define SQLITE_DESERIALIZE_READONLY 4 /* Database is read-only */
/*
** Undo the hack that converts floating point types to integer for
#if 0
} /* End of the 'extern "C"' block */
#endif
-#endif /* _SQLITE3_H_ */
+#endif /* SQLITE3_H */
+/******** Begin file sqlite3rtree.h *********/
/*
** 2010 August 30
**
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
sqlite3 *db,
const char *zGeom,
int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
sqlite3 *db,
const char *zQueryFunc,
int (*xQueryFunc)(sqlite3_rtree_query_info*),
#endif /* ifndef _SQLITE3RTREE_H_ */
+/******** End of sqlite3rtree.h *********/
+/******** Begin file sqlite3session.h *********/
+
+#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
+#define __SQLITESESSION_H_ 1
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#if 0
+extern "C" {
+#endif
+
+
+/*
+** CAPI3REF: Session Object Handle
+**
+** An instance of this object is a [session] that can be used to
+** record changes to a database.
+*/
+typedef struct sqlite3_session sqlite3_session;
+
+/*
+** CAPI3REF: Changeset Iterator Handle
+**
+** An instance of this object acts as a cursor for iterating
+** over the elements of a [changeset] or [patchset].
+*/
+typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
+
+/*
+** CAPI3REF: Create A New Session Object
+** CONSTRUCTOR: sqlite3_session
+**
+** Create a new session object attached to database handle db. If successful,
+** a pointer to the new object is written to *ppSession and SQLITE_OK is
+** returned. If an error occurs, *ppSession is set to NULL and an SQLite
+** error code (e.g. SQLITE_NOMEM) is returned.
+**
+** It is possible to create multiple session objects attached to a single
+** database handle.
+**
+** Session objects created using this function should be deleted using the
+** [sqlite3session_delete()] function before the database handle that they
+** are attached to is itself closed. If the database handle is closed before
+** the session object is deleted, then the results of calling any session
+** module function, including [sqlite3session_delete()] on the session object
+** are undefined.
+**
+** Because the session module uses the [sqlite3_preupdate_hook()] API, it
+** is not possible for an application to register a pre-update hook on a
+** database handle that has one or more session objects attached. Nor is
+** it possible to create a session object attached to a database handle for
+** which a pre-update hook is already defined. The results of attempting
+** either of these things are undefined.
+**
+** The session object will be used to create changesets for tables in
+** database zDb, where zDb is either "main", or "temp", or the name of an
+** attached database. It is not an error if database zDb is not attached
+** to the database when the session object is created.
+*/
+SQLITE_API int sqlite3session_create(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Name of db (e.g. "main") */
+ sqlite3_session **ppSession /* OUT: New session object */
+);
+
+/*
+** CAPI3REF: Delete A Session Object
+** DESTRUCTOR: sqlite3_session
+**
+** Delete a session object previously allocated using
+** [sqlite3session_create()]. Once a session object has been deleted, the
+** results of attempting to use pSession with any other session module
+** function are undefined.
+**
+** Session objects must be deleted before the database handle to which they
+** are attached is closed. Refer to the documentation for
+** [sqlite3session_create()] for details.
+*/
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
+
+
+/*
+** CAPI3REF: Enable Or Disable A Session Object
+** METHOD: sqlite3_session
+**
+** Enable or disable the recording of changes by a session object. When
+** enabled, a session object records changes made to the database. When
+** disabled - it does not. A newly created session object is enabled.
+** Refer to the documentation for [sqlite3session_changeset()] for further
+** details regarding how enabling and disabling a session object affects
+** the eventual changesets.
+**
+** Passing zero to this function disables the session. Passing a value
+** greater than zero enables it. Passing a value less than zero is a
+** no-op, and may be used to query the current state of the session.
+**
+** The return value indicates the final state of the session object: 0 if
+** the session is disabled, or 1 if it is enabled.
+*/
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
+
+/*
+** CAPI3REF: Set Or Clear the Indirect Change Flag
+** METHOD: sqlite3_session
+**
+** Each change recorded by a session object is marked as either direct or
+** indirect. A change is marked as indirect if either:
+**
+** <ul>
+** <li> The session object "indirect" flag is set when the change is
+** made, or
+** <li> The change is made by an SQL trigger or foreign key action
+** instead of directly as a result of a users SQL statement.
+** </ul>
+**
+** If a single row is affected by more than one operation within a session,
+** then the change is considered indirect if all operations meet the criteria
+** for an indirect change above, or direct otherwise.
+**
+** This function is used to set, clear or query the session object indirect
+** flag. If the second argument passed to this function is zero, then the
+** indirect flag is cleared. If it is greater than zero, the indirect flag
+** is set. Passing a value less than zero does not modify the current value
+** of the indirect flag, and may be used to query the current state of the
+** indirect flag for the specified session object.
+**
+** The return value indicates the final state of the indirect flag: 0 if
+** it is clear, or 1 if it is set.
+*/
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
+
+/*
+** CAPI3REF: Attach A Table To A Session Object
+** METHOD: sqlite3_session
+**
+** If argument zTab is not NULL, then it is the name of a table to attach
+** to the session object passed as the first argument. All subsequent changes
+** made to the table while the session object is enabled will be recorded. See
+** documentation for [sqlite3session_changeset()] for further details.
+**
+** Or, if argument zTab is NULL, then changes are recorded for all tables
+** in the database. If additional tables are added to the database (by
+** executing "CREATE TABLE" statements) after this call is made, changes for
+** the new tables are also recorded.
+**
+** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
+** defined as part of their CREATE TABLE statement. It does not matter if the
+** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
+** KEY may consist of a single column, or may be a composite key.
+**
+** It is not an error if the named table does not exist in the database. Nor
+** is it an error if the named table does not have a PRIMARY KEY. However,
+** no changes will be recorded in either of these scenarios.
+**
+** Changes are not recorded for individual rows that have NULL values stored
+** in one or more of their PRIMARY KEY columns.
+**
+** SQLITE_OK is returned if the call completes without error. Or, if an error
+** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+**
+** <h3>Special sqlite_stat1 Handling</h3>
+**
+** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to
+** some of the rules above. In SQLite, the schema of sqlite_stat1 is:
+** <pre>
+** CREATE TABLE sqlite_stat1(tbl,idx,stat)
+** </pre>
+**
+** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are
+** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes
+** are recorded for rows for which (idx IS NULL) is true. However, for such
+** rows a zero-length blob (SQL value X'') is stored in the changeset or
+** patchset instead of a NULL value. This allows such changesets to be
+** manipulated by legacy implementations of sqlite3changeset_invert(),
+** concat() and similar.
+**
+** The sqlite3changeset_apply() function automatically converts the
+** zero-length blob back to a NULL value when updating the sqlite_stat1
+** table. However, if the application calls sqlite3changeset_new(),
+** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset
+** iterator directly (including on a changeset iterator passed to a
+** conflict-handler callback) then the X'' value is returned. The application
+** must translate X'' to NULL itself if required.
+**
+** Legacy (older than 3.22.0) versions of the sessions module cannot capture
+** changes made to the sqlite_stat1 table. Legacy versions of the
+** sqlite3changeset_apply() function silently ignore any modifications to the
+** sqlite_stat1 table that are part of a changeset or patchset.
+*/
+SQLITE_API int sqlite3session_attach(
+ sqlite3_session *pSession, /* Session object */
+ const char *zTab /* Table name */
+);
+
+/*
+** CAPI3REF: Set a table filter on a Session Object.
+** METHOD: sqlite3_session
+**
+** The second argument (xFilter) is the "filter callback". For changes to rows
+** in tables that are not attached to the Session object, the filter is called
+** to determine whether changes to the table's rows should be tracked or not.
+** If xFilter returns 0, changes is not tracked. Note that once a table is
+** attached, xFilter will not be called again.
+*/
+SQLITE_API void sqlite3session_table_filter(
+ sqlite3_session *pSession, /* Session object */
+ int(*xFilter)(
+ void *pCtx, /* Copy of third arg to _filter_table() */
+ const char *zTab /* Table name */
+ ),
+ void *pCtx /* First argument passed to xFilter */
+);
+
+/*
+** CAPI3REF: Generate A Changeset From A Session Object
+** METHOD: sqlite3_session
+**
+** Obtain a changeset containing changes to the tables attached to the
+** session object passed as the first argument. If successful,
+** set *ppChangeset to point to a buffer containing the changeset
+** and *pnChangeset to the size of the changeset in bytes before returning
+** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
+** zero and return an SQLite error code.
+**
+** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
+** each representing a change to a single row of an attached table. An INSERT
+** change contains the values of each field of a new database row. A DELETE
+** contains the original values of each field of a deleted database row. An
+** UPDATE change contains the original values of each field of an updated
+** database row along with the updated values for each updated non-primary-key
+** column. It is not possible for an UPDATE change to represent a change that
+** modifies the values of primary key columns. If such a change is made, it
+** is represented in a changeset as a DELETE followed by an INSERT.
+**
+** Changes are not recorded for rows that have NULL values stored in one or
+** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
+** no corresponding change is present in the changesets returned by this
+** function. If an existing row with one or more NULL values stored in
+** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
+** only an INSERT is appears in the changeset. Similarly, if an existing row
+** with non-NULL PRIMARY KEY values is updated so that one or more of its
+** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
+** DELETE change only.
+**
+** The contents of a changeset may be traversed using an iterator created
+** using the [sqlite3changeset_start()] API. A changeset may be applied to
+** a database with a compatible schema using the [sqlite3changeset_apply()]
+** API.
+**
+** Within a changeset generated by this function, all changes related to a
+** single table are grouped together. In other words, when iterating through
+** a changeset or when applying a changeset to a database, all changes related
+** to a single table are processed before moving on to the next table. Tables
+** are sorted in the same order in which they were attached (or auto-attached)
+** to the sqlite3_session object. The order in which the changes related to
+** a single table are stored is undefined.
+**
+** Following a successful call to this function, it is the responsibility of
+** the caller to eventually free the buffer that *ppChangeset points to using
+** [sqlite3_free()].
+**
+** <h3>Changeset Generation</h3>
+**
+** Once a table has been attached to a session object, the session object
+** records the primary key values of all new rows inserted into the table.
+** It also records the original primary key and other column values of any
+** deleted or updated rows. For each unique primary key value, data is only
+** recorded once - the first time a row with said primary key is inserted,
+** updated or deleted in the lifetime of the session.
+**
+** There is one exception to the previous paragraph: when a row is inserted,
+** updated or deleted, if one or more of its primary key columns contain a
+** NULL value, no record of the change is made.
+**
+** The session object therefore accumulates two types of records - those
+** that consist of primary key values only (created when the user inserts
+** a new record) and those that consist of the primary key values and the
+** original values of other table columns (created when the users deletes
+** or updates a record).
+**
+** When this function is called, the requested changeset is created using
+** both the accumulated records and the current contents of the database
+** file. Specifically:
+**
+** <ul>
+** <li> For each record generated by an insert, the database is queried
+** for a row with a matching primary key. If one is found, an INSERT
+** change is added to the changeset. If no such row is found, no change
+** is added to the changeset.
+**
+** <li> For each record generated by an update or delete, the database is
+** queried for a row with a matching primary key. If such a row is
+** found and one or more of the non-primary key fields have been
+** modified from their original values, an UPDATE change is added to
+** the changeset. Or, if no such row is found in the table, a DELETE
+** change is added to the changeset. If there is a row with a matching
+** primary key in the database, but all fields contain their original
+** values, no change is added to the changeset.
+** </ul>
+**
+** This means, amongst other things, that if a row is inserted and then later
+** deleted while a session object is active, neither the insert nor the delete
+** will be present in the changeset. Or if a row is deleted and then later a
+** row with the same primary key values inserted while a session object is
+** active, the resulting changeset will contain an UPDATE change instead of
+** a DELETE and an INSERT.
+**
+** When a session object is disabled (see the [sqlite3session_enable()] API),
+** it does not accumulate records when rows are inserted, updated or deleted.
+** This may appear to have some counter-intuitive effects if a single row
+** is written to more than once during a session. For example, if a row
+** is inserted while a session object is enabled, then later deleted while
+** the same session object is disabled, no INSERT record will appear in the
+** changeset, even though the delete took place while the session was disabled.
+** Or, if one field of a row is updated while a session is disabled, and
+** another field of the same row is updated while the session is enabled, the
+** resulting changeset will contain an UPDATE change that updates both fields.
+*/
+SQLITE_API int sqlite3session_changeset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppChangeset /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Load The Difference Between Tables Into A Session
+** METHOD: sqlite3_session
+**
+** If it is not already attached to the session object passed as the first
+** argument, this function attaches table zTbl in the same manner as the
+** [sqlite3session_attach()] function. If zTbl does not exist, or if it
+** does not have a primary key, this function is a no-op (but does not return
+** an error).
+**
+** Argument zFromDb must be the name of a database ("main", "temp" etc.)
+** attached to the same database handle as the session object that contains
+** a table compatible with the table attached to the session by this function.
+** A table is considered compatible if it:
+**
+** <ul>
+** <li> Has the same name,
+** <li> Has the same set of columns declared in the same order, and
+** <li> Has the same PRIMARY KEY definition.
+** </ul>
+**
+** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
+** are compatible but do not have any PRIMARY KEY columns, it is not an error
+** but no changes are added to the session object. As with other session
+** APIs, tables without PRIMARY KEYs are simply ignored.
+**
+** This function adds a set of changes to the session object that could be
+** used to update the table in database zFrom (call this the "from-table")
+** so that its content is the same as the table attached to the session
+** object (call this the "to-table"). Specifically:
+**
+** <ul>
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, an INSERT record is added to the session object.
+**
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, a DELETE record is added to the session object.
+**
+** <li> For each row (primary key) that exists in both tables, but features
+** different non-PK values in each, an UPDATE record is added to the
+** session.
+** </ul>
+**
+** To clarify, if this function is called and then a changeset constructed
+** using [sqlite3session_changeset()], then after applying that changeset to
+** database zFrom the contents of the two compatible tables would be
+** identical.
+**
+** It an error if database zFrom does not exist or does not contain the
+** required compatible table.
+**
+** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
+** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
+** may be set to point to a buffer containing an English language error
+** message. It is the responsibility of the caller to free this buffer using
+** sqlite3_free().
+*/
+SQLITE_API int sqlite3session_diff(
+ sqlite3_session *pSession,
+ const char *zFromDb,
+ const char *zTbl,
+ char **pzErrMsg
+);
+
+
+/*
+** CAPI3REF: Generate A Patchset From A Session Object
+** METHOD: sqlite3_session
+**
+** The differences between a patchset and a changeset are that:
+**
+** <ul>
+** <li> DELETE records consist of the primary key fields only. The
+** original values of other fields are omitted.
+** <li> The original values of any modified fields are omitted from
+** UPDATE records.
+** </ul>
+**
+** A patchset blob may be used with up to date versions of all
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
+** attempting to use a patchset blob with old versions of the
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+**
+** Because the non-primary key "old.*" fields are omitted, no
+** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
+** is passed to the sqlite3changeset_apply() API. Other conflict types work
+** in the same way as for changesets.
+**
+** Changes within a patchset are ordered in the same way as for changesets
+** generated by the sqlite3session_changeset() function (i.e. all changes for
+** a single table are grouped together, tables appear in the order in which
+** they were attached to the session object).
+*/
+SQLITE_API int sqlite3session_patchset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnPatchset, /* OUT: Size of buffer at *ppPatchset */
+ void **ppPatchset /* OUT: Buffer containing patchset */
+);
+
+/*
+** CAPI3REF: Test if a changeset has recorded any changes.
+**
+** Return non-zero if no changes to attached tables have been recorded by
+** the session object passed as the first argument. Otherwise, if one or
+** more changes have been recorded, return zero.
+**
+** Even if this function returns zero, it is possible that calling
+** [sqlite3session_changeset()] on the session handle may still return a
+** changeset that contains no changes. This can happen when a row in
+** an attached table is modified and then later on the original values
+** are restored. However, if this function returns non-zero, then it is
+** guaranteed that a call to sqlite3session_changeset() will return a
+** changeset containing zero changes.
+*/
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
+
+/*
+** CAPI3REF: Create An Iterator To Traverse A Changeset
+** CONSTRUCTOR: sqlite3_changeset_iter
+**
+** Create an iterator used to iterate through the contents of a changeset.
+** If successful, *pp is set to point to the iterator handle and SQLITE_OK
+** is returned. Otherwise, if an error occurs, *pp is set to zero and an
+** SQLite error code is returned.
+**
+** The following functions can be used to advance and query a changeset
+** iterator created by this function:
+**
+** <ul>
+** <li> [sqlite3changeset_next()]
+** <li> [sqlite3changeset_op()]
+** <li> [sqlite3changeset_new()]
+** <li> [sqlite3changeset_old()]
+** </ul>
+**
+** It is the responsibility of the caller to eventually destroy the iterator
+** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
+** changeset (pChangeset) must remain valid until after the iterator is
+** destroyed.
+**
+** Assuming the changeset blob was created by one of the
+** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
+** [sqlite3changeset_invert()] functions, all changes within the changeset
+** that apply to a single table are grouped together. This means that when
+** an application iterates through a changeset using an iterator created by
+** this function, all changes that relate to a single table are visited
+** consecutively. There is no chance that the iterator will visit a change
+** the applies to table X, then one for table Y, and then later on visit
+** another change for table X.
+*/
+SQLITE_API int sqlite3changeset_start(
+ sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */
+ int nChangeset, /* Size of changeset blob in bytes */
+ void *pChangeset /* Pointer to blob containing changeset */
+);
+
+
+/*
+** CAPI3REF: Advance A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** This function may only be used with iterators created by function
+** [sqlite3changeset_start()]. If it is called on an iterator passed to
+** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
+** is returned and the call has no effect.
+**
+** Immediately after an iterator is created by sqlite3changeset_start(), it
+** does not point to any change in the changeset. Assuming the changeset
+** is not empty, the first call to this function advances the iterator to
+** point to the first change in the changeset. Each subsequent call advances
+** the iterator to point to the next change in the changeset (if any). If
+** no error occurs and the iterator points to a valid change after a call
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** Otherwise, if all changes in the changeset have already been visited,
+** SQLITE_DONE is returned.
+**
+** If an error occurs, an SQLite error code is returned. Possible error
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** SQLITE_NOMEM.
+*/
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
+** is not the case, this function returns [SQLITE_MISUSE].
+**
+** If argument pzTab is not NULL, then *pzTab is set to point to a
+** nul-terminated utf-8 encoded string containing the name of the table
+** affected by the current change. The buffer remains valid until either
+** sqlite3changeset_next() is called on the iterator or until the
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** set to the number of columns in the table affected by the change. If
+** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
+** is an indirect change, or false (0) otherwise. See the documentation for
+** [sqlite3session_indirect()] for a description of direct and indirect
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** type of change that the iterator currently points to.
+**
+** If no error occurs, SQLITE_OK is returned. If an error does occur, an
+** SQLite error code is returned. The values of the output variables may not
+** be trusted in this case.
+*/
+SQLITE_API int sqlite3changeset_op(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ const char **pzTab, /* OUT: Pointer to table name */
+ int *pnCol, /* OUT: Number of columns in table */
+ int *pOp, /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+ int *pbIndirect /* OUT: True for an 'indirect' change */
+);
+
+/*
+** CAPI3REF: Obtain The Primary Key Definition Of A Table
+** METHOD: sqlite3_changeset_iter
+**
+** For each modified table, a changeset includes the following:
+**
+** <ul>
+** <li> The number of columns in the table, and
+** <li> Which of those columns make up the tables PRIMARY KEY.
+** </ul>
+**
+** This function is used to find which columns comprise the PRIMARY KEY of
+** the table modified by the change that iterator pIter currently points to.
+** If successful, *pabPK is set to point to an array of nCol entries, where
+** nCol is the number of columns in the table. Elements of *pabPK are set to
+** 0x01 if the corresponding column is part of the tables primary key, or
+** 0x00 if it is not.
+**
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
+** in the table.
+**
+** If this function is called when the iterator does not point to a valid
+** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
+** SQLITE_OK is returned and the output variables populated as described
+** above.
+*/
+SQLITE_API int sqlite3changeset_pk(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ unsigned char **pabPK, /* OUT: Array of boolean - true for PK cols */
+ int *pnCol /* OUT: Number of entries in output array */
+);
+
+/*
+** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** original row values stored as part of the UPDATE or DELETE change and
+** returns SQLITE_OK. The name of the function comes from the fact that this
+** is similar to the "old.*" columns available to update or delete triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_old(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Old value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** new row values stored as part of the UPDATE or INSERT change and
+** returns SQLITE_OK. If the change is an UPDATE and does not include
+** a new value for the requested column, *ppValue is set to NULL and
+** SQLITE_OK returned. The name of the function comes from the fact that
+** this is similar to the "new.*" columns available to update or delete
+** triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_new(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: New value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** This function should only be used with iterator objects passed to a
+** conflict-handler callback by [sqlite3changeset_apply()] with either
+** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
+** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
+** is set to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the
+** "conflicting row" associated with the current conflict-handler callback
+** and returns SQLITE_OK.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_conflict(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Value from conflicting row */
+);
+
+/*
+** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+** METHOD: sqlite3_changeset_iter
+**
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+SQLITE_API int sqlite3changeset_fk_conflicts(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int *pnOut /* OUT: Number of FK violations */
+);
+
+
+/*
+** CAPI3REF: Finalize A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
+**
+** This function is used to finalize an iterator allocated with
+** [sqlite3changeset_start()].
+**
+** This function should only be called on iterators created using the
+** [sqlite3changeset_start()] function. If an application calls this
+** function with an iterator passed to a conflict-handler by
+** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
+** call has no effect.
+**
+** If an error was encountered within a call to an sqlite3changeset_xxx()
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
+** to that error is returned by this function. Otherwise, SQLITE_OK is
+** returned. This is to allow the following pattern (pseudo-code):
+**
+** <pre>
+** sqlite3changeset_start();
+** while( SQLITE_ROW==sqlite3changeset_next() ){
+** // Do something with change.
+** }
+** rc = sqlite3changeset_finalize();
+** if( rc!=SQLITE_OK ){
+** // An error has occurred
+** }
+** </pre>
+*/
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Invert A Changeset
+**
+** This function is used to "invert" a changeset object. Applying an inverted
+** changeset to a database reverses the effects of applying the uninverted
+** changeset. Specifically:
+**
+** <ul>
+** <li> Each DELETE change is changed to an INSERT, and
+** <li> Each INSERT change is changed to a DELETE, and
+** <li> For each UPDATE change, the old.* and new.* values are exchanged.
+** </ul>
+**
+** This function does not change the order in which changes appear within
+** the changeset. It merely reverses the sense of each individual change.
+**
+** If successful, a pointer to a buffer containing the inverted changeset
+** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
+** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
+** zeroed and an SQLite error code returned.
+**
+** It is the responsibility of the caller to eventually call sqlite3_free()
+** on the *ppOut pointer to free the buffer allocation following a successful
+** call to this function.
+**
+** WARNING/TODO: This function currently assumes that the input is a valid
+** changeset. If it is not, the results are undefined.
+*/
+SQLITE_API int sqlite3changeset_invert(
+ int nIn, const void *pIn, /* Input changeset */
+ int *pnOut, void **ppOut /* OUT: Inverse of input */
+);
+
+/*
+** CAPI3REF: Concatenate Two Changeset Objects
+**
+** This function is used to concatenate two changesets, A and B, into a
+** single changeset. The result is a changeset equivalent to applying
+** changeset A followed by changeset B.
+**
+** This function combines the two input changesets using an
+** sqlite3_changegroup object. Calling it produces similar results as the
+** following code fragment:
+**
+** <pre>
+** sqlite3_changegroup *pGrp;
+** rc = sqlite3_changegroup_new(&pGrp);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
+** if( rc==SQLITE_OK ){
+** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+** }else{
+** *ppOut = 0;
+** *pnOut = 0;
+** }
+** </pre>
+**
+** Refer to the sqlite3_changegroup documentation below for details.
+*/
+SQLITE_API int sqlite3changeset_concat(
+ int nA, /* Number of bytes in buffer pA */
+ void *pA, /* Pointer to buffer containing changeset A */
+ int nB, /* Number of bytes in buffer pB */
+ void *pB, /* Pointer to buffer containing changeset B */
+ int *pnOut, /* OUT: Number of bytes in output changeset */
+ void **ppOut /* OUT: Buffer containing output changeset */
+);
+
+
+/*
+** CAPI3REF: Changegroup Handle
+**
+** A changegroup is an object used to combine two or more
+** [changesets] or [patchsets]
+*/
+typedef struct sqlite3_changegroup sqlite3_changegroup;
+
+/*
+** CAPI3REF: Create A New Changegroup Object
+** CONSTRUCTOR: sqlite3_changegroup
+**
+** An sqlite3_changegroup object is used to combine two or more changesets
+** (or patchsets) into a single changeset (or patchset). A single changegroup
+** object may combine changesets or patchsets, but not both. The output is
+** always in the same format as the input.
+**
+** If successful, this function returns SQLITE_OK and populates (*pp) with
+** a pointer to a new sqlite3_changegroup object before returning. The caller
+** should eventually free the returned object using a call to
+** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
+** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
+**
+** The usual usage pattern for an sqlite3_changegroup object is as follows:
+**
+** <ul>
+** <li> It is created using a call to sqlite3changegroup_new().
+**
+** <li> Zero or more changesets (or patchsets) are added to the object
+** by calling sqlite3changegroup_add().
+**
+** <li> The result of combining all input changesets together is obtained
+** by the application via a call to sqlite3changegroup_output().
+**
+** <li> The object is deleted using a call to sqlite3changegroup_delete().
+** </ul>
+**
+** Any number of calls to add() and output() may be made between the calls to
+** new() and delete(), and in any order.
+**
+** As well as the regular sqlite3changegroup_add() and
+** sqlite3changegroup_output() functions, also available are the streaming
+** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
+*/
+SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
+
+/*
+** CAPI3REF: Add A Changeset To A Changegroup
+** METHOD: sqlite3_changegroup
+**
+** Add all changes within the changeset (or patchset) in buffer pData (size
+** nData bytes) to the changegroup.
+**
+** If the buffer contains a patchset, then all prior calls to this function
+** on the same changegroup object must also have specified patchsets. Or, if
+** the buffer contains a changeset, so must have the earlier calls to this
+** function. Otherwise, SQLITE_ERROR is returned and no changes are added
+** to the changegroup.
+**
+** Rows within the changeset and changegroup are identified by the values in
+** their PRIMARY KEY columns. A change in the changeset is considered to
+** apply to the same row as a change already present in the changegroup if
+** the two rows have the same primary key.
+**
+** Changes to rows that do not already appear in the changegroup are
+** simply copied into it. Or, if both the new changeset and the changegroup
+** contain changes that apply to a single row, the final contents of the
+** changegroup depends on the type of each change, as follows:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th style="white-space:pre">Existing Change </th>
+** <th style="white-space:pre">New Change </th>
+** <th>Output Change
+** <tr><td>INSERT <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>INSERT <td>UPDATE <td>
+** The INSERT change remains in the changegroup. The values in the
+** INSERT change are modified as if the row was inserted by the
+** existing change and then updated according to the new change.
+** <tr><td>INSERT <td>DELETE <td>
+** The existing INSERT is removed from the changegroup. The DELETE is
+** not added.
+** <tr><td>UPDATE <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>UPDATE <td>UPDATE <td>
+** The existing UPDATE remains within the changegroup. It is amended
+** so that the accompanying values are as if the row was updated once
+** by the existing change and then again by the new change.
+** <tr><td>UPDATE <td>DELETE <td>
+** The existing UPDATE is replaced by the new DELETE within the
+** changegroup.
+** <tr><td>DELETE <td>INSERT <td>
+** If one or more of the column values in the row inserted by the
+** new change differ from those in the row deleted by the existing
+** change, the existing DELETE is replaced by an UPDATE within the
+** changegroup. Otherwise, if the inserted row is exactly the same
+** as the deleted row, the existing DELETE is simply discarded.
+** <tr><td>DELETE <td>UPDATE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>DELETE <td>DELETE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** </table>
+**
+** If the new changeset contains changes to a table that is already present
+** in the changegroup, then the number of columns and the position of the
+** primary key columns for the table must be consistent. If this is not the
+** case, this function fails with SQLITE_SCHEMA. If the input changeset
+** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
+** returned. Or, if an out-of-memory condition occurs during processing, this
+** function returns SQLITE_NOMEM. In all cases, if an error occurs the
+** final contents of the changegroup is undefined.
+**
+** If no error occurs, SQLITE_OK is returned.
+*/
+SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
+
+/*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+** METHOD: sqlite3_changegroup
+**
+** Obtain a buffer containing a changeset (or patchset) representing the
+** current contents of the changegroup. If the inputs to the changegroup
+** were themselves changesets, the output is a changeset. Or, if the
+** inputs were patchsets, the output is also a patchset.
+**
+** As with the output of the sqlite3session_changeset() and
+** sqlite3session_patchset() functions, all changes related to a single
+** table are grouped together in the output of this function. Tables appear
+** in the same order as for the very first changeset added to the changegroup.
+** If the second or subsequent changesets added to the changegroup contain
+** changes for tables that do not appear in the first changeset, they are
+** appended onto the end of the output changeset, again in the order in
+** which they are first encountered.
+**
+** If an error occurs, an SQLite error code is returned and the output
+** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
+** is returned and the output variables are set to the size of and a
+** pointer to the output buffer, respectively. In this case it is the
+** responsibility of the caller to eventually free the buffer using a
+** call to sqlite3_free().
+*/
+SQLITE_API int sqlite3changegroup_output(
+ sqlite3_changegroup*,
+ int *pnData, /* OUT: Size of output buffer in bytes */
+ void **ppData /* OUT: Pointer to output buffer */
+);
+
+/*
+** CAPI3REF: Delete A Changegroup Object
+** DESTRUCTOR: sqlite3_changegroup
+*/
+SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
+
+/*
+** CAPI3REF: Apply A Changeset To A Database
+**
+** Apply a changeset or patchset to a database. These functions attempt to
+** update the "main" database attached to handle db with the changes found in
+** the changeset passed via the second and third arguments.
+**
+** The fourth argument (xFilter) passed to these functions is the "filter
+** callback". If it is not NULL, then for each table affected by at least one
+** change in the changeset, the filter callback is invoked with
+** the table name as the second argument, and a copy of the context pointer
+** passed as the sixth argument as the first. If the "filter callback"
+** returns zero, then no attempt is made to apply any changes to the table.
+** Otherwise, if the return value is non-zero or the xFilter argument to
+** is NULL, all changes related to the table are attempted.
+**
+** For each table that is not excluded by the filter callback, this function
+** tests that the target database contains a compatible table. A table is
+** considered compatible if all of the following are true:
+**
+** <ul>
+** <li> The table has the same name as the name recorded in the
+** changeset, and
+** <li> The table has at least as many columns as recorded in the
+** changeset, and
+** <li> The table has primary key columns in the same position as
+** recorded in the changeset.
+** </ul>
+**
+** If there is no compatible table, it is not an error, but none of the
+** changes associated with the table are applied. A warning message is issued
+** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
+** one such warning is issued for each table in the changeset.
+**
+** For each change for which there is a compatible table, an attempt is made
+** to modify the table contents according to the UPDATE, INSERT or DELETE
+** change. If a change cannot be applied cleanly, the conflict handler
+** function passed as the fifth argument to sqlite3changeset_apply() may be
+** invoked. A description of exactly when the conflict handler is invoked for
+** each type of change is below.
+**
+** Unlike the xFilter argument, xConflict may not be passed NULL. The results
+** of passing anything other than a valid function pointer as the xConflict
+** argument are undefined.
+**
+** Each time the conflict handler function is invoked, it must return one
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
+** if the second argument passed to the conflict handler is either
+** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
+** returns an illegal value, any changes already made are rolled back and
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** actions are taken by sqlite3changeset_apply() depending on the value
+** returned by each invocation of the conflict-handler function. Refer to
+** the documentation for the three
+** [SQLITE_CHANGESET_OMIT|available return values] for details.
+**
+** <dl>
+** <dt>DELETE Changes<dd>
+** For each DELETE change, the function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all non-primary key columns also match the values stored in
+** the changeset the row is deleted from the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the non-primary key fields contains a value different from the original
+** row value stored in the changeset, the conflict-handler function is
+** invoked with [SQLITE_CHANGESET_DATA] as the second argument. If the
+** database table has more columns than are recorded in the changeset,
+** only the values of those non-primary key fields are compared against
+** the current database contents - any trailing database table columns
+** are ignored.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
+** (which can only happen if a foreign key constraint is violated), the
+** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
+** passed as the second argument. This includes the case where the DELETE
+** operation is attempted because an earlier call to the conflict handler
+** function returned [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>INSERT Changes<dd>
+** For each INSERT change, an attempt is made to insert the new row into
+** the database. If the changeset row contains fewer fields than the
+** database table, the trailing fields are populated with their default
+** values.
+**
+** If the attempt to insert the row fails because the database already
+** contains a row with the same primary key values, the conflict handler
+** function is invoked with the second argument set to
+** [SQLITE_CHANGESET_CONFLICT].
+**
+** If the attempt to insert the row fails because of some other constraint
+** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
+** This includes the case where the INSERT operation is re-attempted because
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>UPDATE Changes<dd>
+** For each UPDATE change, the function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all modified non-primary key columns also match the values
+** stored in the changeset the row is updated within the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the modified non-primary key fields contains a value different from an
+** original row value stored in the changeset, the conflict-handler function
+** is invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
+** UPDATE changes only contain values for non-primary key fields that are
+** to be modified, only those fields need to match the original values to
+** avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the UPDATE operation is attempted, but SQLite returns
+** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
+** This includes the case where the UPDATE operation is attempted after
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+** </dl>
+**
+** It is safe to execute SQL statements, including those that write to the
+** table that the callback related to, from within the xConflict callback.
+** This can be used to further customize the applications conflict
+** resolution strategy.
+**
+** All changes made by these functions are enclosed in a savepoint transaction.
+** If any other error (aside from a constraint failure when attempting to
+** write to the target database) occurs, then the savepoint transaction is
+** rolled back, restoring the target database to its original state, and an
+** SQLite error code returned.
+**
+** If the output parameters (ppRebase) and (pnRebase) are non-NULL and
+** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2()
+** may set (*ppRebase) to point to a "rebase" that may be used with the
+** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase)
+** is set to the size of the buffer in bytes. It is the responsibility of the
+** caller to eventually free any such buffer using sqlite3_free(). The buffer
+** is only allocated and populated if one or more conflicts were encountered
+** while applying the patchset. See comments surrounding the sqlite3_rebaser
+** APIs for further details.
+*/
+SQLITE_API int sqlite3changeset_apply(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+SQLITE_API int sqlite3changeset_apply_v2(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase
+);
+
+/*
+** CAPI3REF: Constants Passed To The Conflict Handler
+**
+** Values that may be passed as the second argument to a conflict-handler.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_DATA<dd>
+** The conflict handler is invoked with CHANGESET_DATA as the second argument
+** when processing a DELETE or UPDATE change if a row with the required
+** PRIMARY KEY fields is present in the database, but one or more other
+** (non primary-key) fields modified by the update do not contain the
+** expected "before" values.
+**
+** The conflicting row, in this case, is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
+** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
+** argument when processing a DELETE or UPDATE change if a row with the
+** required PRIMARY KEY fields is not present in the database.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** <dt>SQLITE_CHANGESET_CONFLICT<dd>
+** CHANGESET_CONFLICT is passed as the second argument to the conflict
+** handler while processing an INSERT change if the operation would result
+** in duplicate primary key values.
+**
+** The conflicting row in this case is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
+** If foreign key handling is enabled, and applying a changeset leaves the
+** database in a state containing foreign key violations, the conflict
+** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
+** exactly once before the changeset is committed. If the conflict handler
+** returns CHANGESET_OMIT, the changes, including those that caused the
+** foreign key constraint violation, are committed. Or, if it returns
+** CHANGESET_ABORT, the changeset is rolled back.
+**
+** No current or conflicting row information is provided. The only function
+** it is possible to call on the supplied sqlite3_changeset_iter handle
+** is sqlite3changeset_fk_conflicts().
+**
+** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
+** If any other constraint violation occurs while applying a change (i.e.
+** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+** invoked with CHANGESET_CONSTRAINT as the second argument.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** </dl>
+*/
+#define SQLITE_CHANGESET_DATA 1
+#define SQLITE_CHANGESET_NOTFOUND 2
+#define SQLITE_CHANGESET_CONFLICT 3
+#define SQLITE_CHANGESET_CONSTRAINT 4
+#define SQLITE_CHANGESET_FOREIGN_KEY 5
+
+/*
+** CAPI3REF: Constants Returned By The Conflict Handler
+**
+** A conflict handler callback must return one of the following three values.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_OMIT<dd>
+** If a conflict handler returns this value no special action is taken. The
+** change that caused the conflict is not applied. The session module
+** continues to the next change in the changeset.
+**
+** <dt>SQLITE_CHANGESET_REPLACE<dd>
+** This value may only be returned if the second argument to the conflict
+** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
+** is not the case, any changes applied so far are rolled back and the
+** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
+** handler, then the conflicting row is either updated or deleted, depending
+** on the type of change.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
+** handler, then the conflicting row is removed from the database and a
+** second attempt to apply the change is made. If this second attempt fails,
+** the original row is restored to the database before continuing.
+**
+** <dt>SQLITE_CHANGESET_ABORT<dd>
+** If this value is returned, any changes applied so far are rolled back
+** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
+** </dl>
+*/
+#define SQLITE_CHANGESET_OMIT 0
+#define SQLITE_CHANGESET_REPLACE 1
+#define SQLITE_CHANGESET_ABORT 2
+
+/*
+** CAPI3REF: Rebasing changesets
+** EXPERIMENTAL
+**
+** Suppose there is a site hosting a database in state S0. And that
+** modifications are made that move that database to state S1 and a
+** changeset recorded (the "local" changeset). Then, a changeset based
+** on S0 is received from another site (the "remote" changeset) and
+** applied to the database. The database is then in state
+** (S1+"remote"), where the exact state depends on any conflict
+** resolution decisions (OMIT or REPLACE) made while applying "remote".
+** Rebasing a changeset is to update it to take those conflict
+** resolution decisions into account, so that the same conflicts
+** do not have to be resolved elsewhere in the network.
+**
+** For example, if both the local and remote changesets contain an
+** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)":
+**
+** local: INSERT INTO t1 VALUES(1, 'v1');
+** remote: INSERT INTO t1 VALUES(1, 'v2');
+**
+** and the conflict resolution is REPLACE, then the INSERT change is
+** removed from the local changeset (it was overridden). Or, if the
+** conflict resolution was "OMIT", then the local changeset is modified
+** to instead contain:
+**
+** UPDATE t1 SET b = 'v2' WHERE a=1;
+**
+** Changes within the local changeset are rebased as follows:
+**
+** <dl>
+** <dt>Local INSERT<dd>
+** This may only conflict with a remote INSERT. If the conflict
+** resolution was OMIT, then add an UPDATE change to the rebased
+** changeset. Or, if the conflict resolution was REPLACE, add
+** nothing to the rebased changeset.
+**
+** <dt>Local DELETE<dd>
+** This may conflict with a remote UPDATE or DELETE. In both cases the
+** only possible resolution is OMIT. If the remote operation was a
+** DELETE, then add no change to the rebased changeset. If the remote
+** operation was an UPDATE, then the old.* fields of change are updated
+** to reflect the new.* values in the UPDATE.
+**
+** <dt>Local UPDATE<dd>
+** This may conflict with a remote UPDATE or DELETE. If it conflicts
+** with a DELETE, and the conflict resolution was OMIT, then the update
+** is changed into an INSERT. Any undefined values in the new.* record
+** from the update change are filled in using the old.* values from
+** the conflicting DELETE. Or, if the conflict resolution was REPLACE,
+** the UPDATE change is simply omitted from the rebased changeset.
+**
+** If conflict is with a remote UPDATE and the resolution is OMIT, then
+** the old.* values are rebased using the new.* values in the remote
+** change. Or, if the resolution is REPLACE, then the change is copied
+** into the rebased changeset with updates to columns also updated by
+** the conflicting remote UPDATE removed. If this means no columns would
+** be updated, the change is omitted.
+** </dl>
+**
+** A local change may be rebased against multiple remote changes
+** simultaneously. If a single key is modified by multiple remote
+** changesets, they are combined as follows before the local changeset
+** is rebased:
+**
+** <ul>
+** <li> If there has been one or more REPLACE resolutions on a
+** key, it is rebased according to a REPLACE.
+**
+** <li> If there have been no REPLACE resolutions on a key, then
+** the local changeset is rebased according to the most recent
+** of the OMIT resolutions.
+** </ul>
+**
+** Note that conflict resolutions from multiple remote changesets are
+** combined on a per-field basis, not per-row. This means that in the
+** case of multiple remote UPDATE operations, some fields of a single
+** local change may be rebased for REPLACE while others are rebased for
+** OMIT.
+**
+** In order to rebase a local changeset, the remote changeset must first
+** be applied to the local database using sqlite3changeset_apply_v2() and
+** the buffer of rebase information captured. Then:
+**
+** <ol>
+** <li> An sqlite3_rebaser object is created by calling
+** sqlite3rebaser_create().
+** <li> The new object is configured with the rebase buffer obtained from
+** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure().
+** If the local changeset is to be rebased against multiple remote
+** changesets, then sqlite3rebaser_configure() should be called
+** multiple times, in the same order that the multiple
+** sqlite3changeset_apply_v2() calls were made.
+** <li> Each local changeset is rebased by calling sqlite3rebaser_rebase().
+** <li> The sqlite3_rebaser object is deleted by calling
+** sqlite3rebaser_delete().
+** </ol>
+*/
+typedef struct sqlite3_rebaser sqlite3_rebaser;
+
+/*
+** CAPI3REF: Create a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Allocate a new changeset rebaser object. If successful, set (*ppNew) to
+** point to the new object and return SQLITE_OK. Otherwise, if an error
+** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew)
+** to NULL.
+*/
+SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew);
+
+/*
+** CAPI3REF: Configure a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Configure the changeset rebaser object to rebase changesets according
+** to the conflict resolutions described by buffer pRebase (size nRebase
+** bytes), which must have been obtained from a previous call to
+** sqlite3changeset_apply_v2().
+*/
+SQLITE_API int sqlite3rebaser_configure(
+ sqlite3_rebaser*,
+ int nRebase, const void *pRebase
+);
+
+/*
+** CAPI3REF: Rebase a changeset
+** EXPERIMENTAL
+**
+** Argument pIn must point to a buffer containing a changeset nIn bytes
+** in size. This function allocates and populates a buffer with a copy
+** of the changeset rebased rebased according to the configuration of the
+** rebaser object passed as the first argument. If successful, (*ppOut)
+** is set to point to the new buffer containing the rebased changset and
+** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the
+** responsibility of the caller to eventually free the new buffer using
+** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut)
+** are set to zero and an SQLite error code returned.
+*/
+SQLITE_API int sqlite3rebaser_rebase(
+ sqlite3_rebaser*,
+ int nIn, const void *pIn,
+ int *pnOut, void **ppOut
+);
+
+/*
+** CAPI3REF: Delete a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Delete the changeset rebaser object and all associated resources. There
+** should be one call to this function for each successful invocation
+** of sqlite3rebaser_create().
+*/
+SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p);
+
+/*
+** CAPI3REF: Streaming Versions of API functions.
+**
+** The six streaming API xxx_strm() functions serve similar purposes to the
+** corresponding non-streaming API functions:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th>Streaming function<th>Non-streaming equivalent</th>
+** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
+** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
+** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
+** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
+** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
+** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
+** </table>
+**
+** Non-streaming functions that accept changesets (or patchsets) as input
+** require that the entire changeset be stored in a single buffer in memory.
+** Similarly, those that return a changeset or patchset do so by returning
+** a pointer to a single large buffer allocated using sqlite3_malloc().
+** Normally this is convenient. However, if an application running in a
+** low-memory environment is required to handle very large changesets, the
+** large contiguous memory allocations required can become onerous.
+**
+** In order to avoid this problem, instead of a single large buffer, input
+** is passed to a streaming API functions by way of a callback function that
+** the sessions module invokes to incrementally request input data as it is
+** required. In all cases, a pair of API function parameters such as
+**
+** <pre>
+** int nChangeset,
+** void *pChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xInput)(void *pIn, void *pData, int *pnData),
+** void *pIn,
+** </pre>
+**
+** Each time the xInput callback is invoked by the sessions module, the first
+** argument passed is a copy of the supplied pIn context pointer. The second
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
+** error occurs the xInput method should copy up to (*pnData) bytes of data
+** into the buffer and set (*pnData) to the actual number of bytes copied
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** error code should be returned. In all cases, if an xInput callback returns
+** an error, all processing is abandoned and the streaming API function
+** returns a copy of the error code to the caller.
+**
+** In the case of sqlite3changeset_start_strm(), the xInput callback may be
+** invoked by the sessions module at any point during the lifetime of the
+** iterator. If such an xInput callback returns an error, the iterator enters
+** an error state, whereby all subsequent calls to iterator functions
+** immediately fail with the same error code as returned by xInput.
+**
+** Similarly, streaming API functions that return changesets (or patchsets)
+** return them in chunks by way of a callback function instead of via a
+** pointer to a single large buffer. In this case, a pair of parameters such
+** as:
+**
+** <pre>
+** int *pnChangeset,
+** void **ppChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xOutput)(void *pOut, const void *pData, int nData),
+** void *pOut
+** </pre>
+**
+** The xOutput callback is invoked zero or more times to return data to
+** the application. The first parameter passed to each call is a copy of the
+** pOut pointer supplied by the application. The second parameter, pData,
+** points to a buffer nData bytes in size containing the chunk of output
+** data being returned. If the xOutput callback successfully processes the
+** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
+** it should return some other SQLite error code. In this case processing
+** is immediately abandoned and the streaming API function returns a copy
+** of the xOutput error code to the application.
+**
+** The sessions module never invokes an xOutput callback with the third
+** parameter set to a value less than or equal to zero. Other than this,
+** no guarantees are made as to the size of the chunks of data returned.
+*/
+SQLITE_API int sqlite3changeset_apply_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+SQLITE_API int sqlite3changeset_apply_v2_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase
+);
+SQLITE_API int sqlite3changeset_concat_strm(
+ int (*xInputA)(void *pIn, void *pData, int *pnData),
+ void *pInA,
+ int (*xInputB)(void *pIn, void *pData, int *pnData),
+ void *pInB,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changeset_invert_strm(
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changeset_start_strm(
+ sqlite3_changeset_iter **pp,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+SQLITE_API int sqlite3session_changeset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3session_patchset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3rebaser_rebase_strm(
+ sqlite3_rebaser *pRebaser,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#if 0
+}
+#endif
+
+#endif /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
+
+/******** End of sqlite3session.h *********/
+/******** Begin file fts5.h *********/
/*
** 2014 May 31
**
#ifndef _FTS5_H
#define _FTS5_H
-/* #include "sqlite3.h" */
#if 0
extern "C" {
** an OOM condition or IO error), an appropriate SQLite error code is
** returned.
**
+** This function may be quite inefficient if used with an FTS5 table
+** created with the "columnsize=0" option.
+**
** xColumnText:
** This function attempts to retrieve the text of column iCol of the
** current document. If successful, (*pz) is set to point to a buffer
** the query within the current row. Return SQLITE_OK if successful, or
** an error code (i.e. SQLITE_NOMEM) if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always returns 0.
+**
** xInst:
** Query for the details of phrase match iIdx within the current row.
** Phrase matches are numbered starting from zero, so the iIdx argument
** should be greater than or equal to zero and smaller than the value
** output by xInstCount().
**
+** Usually, output parameter *piPhrase is set to the phrase number, *piCol
+** to the column in which it occurs and *piOff the token offset of the
+** first token of the phrase. The exception is if the table was created
+** with the offsets=0 option specified. In this case *piOff is always
+** set to -1.
+**
** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
** if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option.
+**
** xRowid:
** Returns the rowid of the current row.
**
** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
**
** with $p set to a phrase equivalent to the phrase iPhrase of the
-** current query is executed. For each row visited, the callback function
-** passed as the fourth argument is invoked. The context and API objects
-** passed to the callback function may be used to access the properties of
-** each matched row. Invoking Api.xUserData() returns a copy of the pointer
-** passed as the third argument to pUserData.
+** current query is executed. Any column filter that applies to
+** phrase iPhrase of the current query is included in $p. For each
+** row visited, the callback function passed as the fourth argument
+** is invoked. The context and API objects passed to the callback
+** function may be used to access the properties of each matched row.
+** Invoking Api.xUserData() returns a copy of the pointer passed as
+** the third argument to pUserData.
**
** If the callback function returns any value other than SQLITE_OK, the
** query is abandoned and the xQueryPhrase function returns immediately.
** Fts5PhraseIter iter;
** int iCol, iOff;
** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-** iOff>=0;
+** iCol>=0;
** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
** ){
** // An instance of phrase iPhrase at offset iOff of column iCol
**
** The Fts5PhraseIter structure is defined above. Applications should not
** modify this structure directly - it should only be used as shown above
-** with the xPhraseFirst() and xPhraseNext() API methods.
+** with the xPhraseFirst() and xPhraseNext() API methods (and by
+** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always iterates
+** through an empty set (all calls to xPhraseFirst() set iCol to -1).
**
** xPhraseNext()
** See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+** and xPhraseNext() APIs described above. The difference is that instead
+** of iterating through all instances of a phrase in the current row, these
+** APIs are used to iterate through the set of columns in the current row
+** that contain one or more instances of a specified phrase. For example:
+**
+** Fts5PhraseIter iter;
+** int iCol;
+** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+** iCol>=0;
+** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+** ){
+** // Column iCol contains at least one instance of phrase iPhrase
+** }
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" option. If the FTS5 table is created with either
+** "detail=none" "content=" option (i.e. if it is a contentless table),
+** then this API always iterates through an empty set (all calls to
+** xPhraseFirstColumn() set iCol to -1).
+**
+** The information accessed using this API and its companion
+** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+** (or xInst/xInstCount). The chief advantage of this API is that it is
+** significantly more efficient than those alternatives when used with
+** "detail=column" tables.
+**
+** xPhraseNextColumn()
+** See xPhraseFirstColumn above.
*/
struct Fts5ExtensionApi {
- int iVersion; /* Currently always set to 1 */
+ int iVersion; /* Currently always set to 3 */
void *(*xUserData)(Fts5Context*);
int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
void *(*xGetAuxdata)(Fts5Context*, int bClear);
- void (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+ int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+ int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+ void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
};
/*
** behaviour. The structure methods are expected to function as follows:
**
** xCreate:
-** This function is used to allocate and inititalize a tokenizer instance.
+** This function is used to allocate and initialize a tokenizer instance.
** A tokenizer instance is required to actually tokenize text.
**
** The first argument passed to this function is a copy of the (void*)
#endif /* _FTS5_H */
-
+/******** End of fts5.h *********/
/************** End of sqlite3.h *********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
-#ifdef _HAVE_SQLITE_CONFIG_H
-#include "config.h"
+#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H)
+/* #include "config.h" */
+#define SQLITECONFIG_H 1
#endif
/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/
** Not currently enforced.
*/
#ifndef SQLITE_MAX_VDBE_OP
-# define SQLITE_MAX_VDBE_OP 25000
+# define SQLITE_MAX_VDBE_OP 250000000
#endif
/*
** The suggested maximum number of in-memory pages to use for
** the main database table and for temporary tables.
**
-** IMPLEMENTATION-OF: R-31093-59126 The default suggested cache size
-** is 2000 pages.
+** IMPLEMENTATION-OF: R-30185-15359 The default suggested cache size is -2000,
+** which means the cache size is limited to 2048000 bytes of memory.
** IMPLEMENTATION-OF: R-48205-43578 The default suggested cache size can be
** altered using the SQLITE_DEFAULT_CACHE_SIZE compile-time options.
*/
#ifndef SQLITE_DEFAULT_CACHE_SIZE
-# define SQLITE_DEFAULT_CACHE_SIZE 2000
+# define SQLITE_DEFAULT_CACHE_SIZE -2000
#endif
/*
/*
** The maximum number of attached databases. This must be between 0
-** and 62. The upper bound on 62 is because a 64-bit integer bitmap
-** is used internally to track attached databases.
+** and 125. The upper bound of 125 is because the attached databases are
+** counted using a signed 8-bit integer which has a maximum value of 127
+** and we have to allow 2 extra counts for the "main" and "temp" databases.
*/
#ifndef SQLITE_MAX_ATTACHED
# define SQLITE_MAX_ATTACHED 10
** The default size of a database page.
*/
#ifndef SQLITE_DEFAULT_PAGE_SIZE
-# define SQLITE_DEFAULT_PAGE_SIZE 1024
+# define SQLITE_DEFAULT_PAGE_SIZE 4096
#endif
#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
# undef SQLITE_DEFAULT_PAGE_SIZE
** to the next, so we have developed the following set of #if statements
** to generate appropriate macros for a wide range of compilers.
**
-** The correct "ANSI" way to do this is to use the intptr_t type.
+** The correct "ANSI" way to do this is to use the intptr_t type.
** Unfortunately, that typedef is not available on all compilers, or
** if it is available, it requires an #include of specific headers
** that vary from one machine to the next.
** the SQLITE_DISABLE_INTRINSIC define.
*/
#if !defined(SQLITE_DISABLE_INTRINSIC)
-# if defined(_MSC_VER) && _MSC_VER>=1300
+# if defined(_MSC_VER) && _MSC_VER>=1400
# if !defined(_WIN32_WCE)
# include <intrin.h>
# pragma intrinsic(_byteswap_ushort)
# pragma intrinsic(_byteswap_ulong)
+# pragma intrinsic(_byteswap_uint64)
# pragma intrinsic(_ReadWriteBarrier)
# else
# include <cmnintrin.h>
**
** Older versions of SQLite used an optional THREADSAFE macro.
** We support that for legacy.
+**
+** To ensure that the correct value of "THREADSAFE" is reported when querying
+** for compile-time options at runtime (e.g. "PRAGMA compile_options"), this
+** logic is partially replicated in ctime.c. If it is updated here, it should
+** also be updated there.
*/
#if !defined(SQLITE_THREADSAFE)
# if defined(THREADSAFE)
** is set. Thus NDEBUG becomes an opt-in rather than an opt-out
** feature.
*/
-#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
+#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
# define NDEBUG 1
#endif
#if defined(NDEBUG) && defined(SQLITE_DEBUG)
#endif
/*
-** The testcase() macro is used to aid in coverage testing. When
+** The testcase() macro is used to aid in coverage testing. When
** doing coverage testing, the condition inside the argument to
** testcase() must be evaluated both true and false in order to
** get full branch coverage. The testcase() macro is inserted
#endif
/*
-** The ALWAYS and NEVER macros surround boolean expressions which
+** The ALWAYS and NEVER macros surround boolean expressions which
** are intended to always be true or false, respectively. Such
** expressions could be omitted from the code completely. But they
** are included in a few cases in order to enhance the resilience
** be true and false so that the unreachable code they specify will
** not be counted as untested code.
*/
-#if defined(SQLITE_COVERAGE_TEST)
+#if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST)
# define ALWAYS(X) (1)
# define NEVER(X) (0)
#elif !defined(NDEBUG)
# define NEVER(X) (X)
#endif
+/*
+** Some conditionals are optimizations only. In other words, if the
+** conditionals are replaced with a constant 1 (true) or 0 (false) then
+** the correct answer is still obtained, though perhaps not as quickly.
+**
+** The following macros mark these optimizations conditionals.
+*/
+#if defined(SQLITE_MUTATION_TEST)
+# define OK_IF_ALWAYS_TRUE(X) (1)
+# define OK_IF_ALWAYS_FALSE(X) (0)
+#else
+# define OK_IF_ALWAYS_TRUE(X) (X)
+# define OK_IF_ALWAYS_FALSE(X) (X)
+#endif
+
+/*
+** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is
+** defined. We need to defend against those failures when testing with
+** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches
+** during a normal build. The following macro can be used to disable tests
+** that are always false except when SQLITE_TEST_REALLOC_STRESS is set.
+*/
+#if defined(SQLITE_TEST_REALLOC_STRESS)
+# define ONLY_IF_REALLOC_STRESS(X) (X)
+#elif !defined(NDEBUG)
+# define ONLY_IF_REALLOC_STRESS(X) ((X)?(assert(0),1):0)
+#else
+# define ONLY_IF_REALLOC_STRESS(X) (0)
+#endif
+
/*
** Declarations used for tracing the operating system interfaces.
*/
# undef SQLITE_NEED_ERR_NAME
#endif
+/*
+** SQLITE_ENABLE_EXPLAIN_COMMENTS is incompatible with SQLITE_OMIT_EXPLAIN
+*/
+#ifdef SQLITE_OMIT_EXPLAIN
+# undef SQLITE_ENABLE_EXPLAIN_COMMENTS
+#endif
+
/*
** Return true (non-zero) if the input is an integer that is too large
** to fit in 32-bits. This macro is used inside of various testcase()
** This is the header file for the generic hash-table implementation
** used in SQLite.
*/
-#ifndef _SQLITE_HASH_H_
-#define _SQLITE_HASH_H_
+#ifndef SQLITE_HASH_H
+#define SQLITE_HASH_H
/* Forward declarations of structures. */
typedef struct Hash Hash;
*/
/* #define sqliteHashCount(H) ((H)->count) // NOT USED */
-#endif /* _SQLITE_HASH_H_ */
+#endif /* SQLITE_HASH_H */
/************** End of hash.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
#define TK_AS 24
#define TK_WITHOUT 25
#define TK_COMMA 26
-#define TK_ID 27
-#define TK_INDEXED 28
-#define TK_ABORT 29
-#define TK_ACTION 30
-#define TK_AFTER 31
-#define TK_ANALYZE 32
-#define TK_ASC 33
-#define TK_ATTACH 34
-#define TK_BEFORE 35
-#define TK_BY 36
-#define TK_CASCADE 37
-#define TK_CAST 38
-#define TK_COLUMNKW 39
-#define TK_CONFLICT 40
-#define TK_DATABASE 41
-#define TK_DESC 42
-#define TK_DETACH 43
-#define TK_EACH 44
-#define TK_FAIL 45
-#define TK_FOR 46
-#define TK_IGNORE 47
-#define TK_INITIALLY 48
-#define TK_INSTEAD 49
-#define TK_LIKE_KW 50
-#define TK_MATCH 51
-#define TK_NO 52
-#define TK_KEY 53
-#define TK_OF 54
-#define TK_OFFSET 55
-#define TK_PRAGMA 56
-#define TK_RAISE 57
-#define TK_RECURSIVE 58
-#define TK_REPLACE 59
-#define TK_RESTRICT 60
-#define TK_ROW 61
-#define TK_TRIGGER 62
-#define TK_VACUUM 63
-#define TK_VIEW 64
-#define TK_VIRTUAL 65
-#define TK_WITH 66
-#define TK_REINDEX 67
-#define TK_RENAME 68
-#define TK_CTIME_KW 69
-#define TK_ANY 70
-#define TK_OR 71
-#define TK_AND 72
-#define TK_IS 73
-#define TK_BETWEEN 74
-#define TK_IN 75
-#define TK_ISNULL 76
-#define TK_NOTNULL 77
-#define TK_NE 78
-#define TK_EQ 79
-#define TK_GT 80
-#define TK_LE 81
-#define TK_LT 82
-#define TK_GE 83
-#define TK_ESCAPE 84
-#define TK_BITAND 85
-#define TK_BITOR 86
-#define TK_LSHIFT 87
-#define TK_RSHIFT 88
-#define TK_PLUS 89
-#define TK_MINUS 90
-#define TK_STAR 91
-#define TK_SLASH 92
-#define TK_REM 93
-#define TK_CONCAT 94
-#define TK_COLLATE 95
-#define TK_BITNOT 96
+#define TK_ABORT 27
+#define TK_ACTION 28
+#define TK_AFTER 29
+#define TK_ANALYZE 30
+#define TK_ASC 31
+#define TK_ATTACH 32
+#define TK_BEFORE 33
+#define TK_BY 34
+#define TK_CASCADE 35
+#define TK_CAST 36
+#define TK_CONFLICT 37
+#define TK_DATABASE 38
+#define TK_DESC 39
+#define TK_DETACH 40
+#define TK_EACH 41
+#define TK_FAIL 42
+#define TK_OR 43
+#define TK_AND 44
+#define TK_IS 45
+#define TK_MATCH 46
+#define TK_LIKE_KW 47
+#define TK_BETWEEN 48
+#define TK_IN 49
+#define TK_ISNULL 50
+#define TK_NOTNULL 51
+#define TK_NE 52
+#define TK_EQ 53
+#define TK_GT 54
+#define TK_LE 55
+#define TK_LT 56
+#define TK_GE 57
+#define TK_ESCAPE 58
+#define TK_ID 59
+#define TK_COLUMNKW 60
+#define TK_FOR 61
+#define TK_IGNORE 62
+#define TK_INITIALLY 63
+#define TK_INSTEAD 64
+#define TK_NO 65
+#define TK_KEY 66
+#define TK_OF 67
+#define TK_OFFSET 68
+#define TK_PRAGMA 69
+#define TK_RAISE 70
+#define TK_RECURSIVE 71
+#define TK_REPLACE 72
+#define TK_RESTRICT 73
+#define TK_ROW 74
+#define TK_TRIGGER 75
+#define TK_VACUUM 76
+#define TK_VIEW 77
+#define TK_VIRTUAL 78
+#define TK_WITH 79
+#define TK_REINDEX 80
+#define TK_RENAME 81
+#define TK_CTIME_KW 82
+#define TK_ANY 83
+#define TK_BITAND 84
+#define TK_BITOR 85
+#define TK_LSHIFT 86
+#define TK_RSHIFT 87
+#define TK_PLUS 88
+#define TK_MINUS 89
+#define TK_STAR 90
+#define TK_SLASH 91
+#define TK_REM 92
+#define TK_CONCAT 93
+#define TK_COLLATE 94
+#define TK_BITNOT 95
+#define TK_INDEXED 96
#define TK_STRING 97
#define TK_JOIN_KW 98
#define TK_CONSTRAINT 99
#define TK_LIMIT 129
#define TK_WHERE 130
#define TK_INTO 131
-#define TK_INTEGER 132
-#define TK_FLOAT 133
-#define TK_BLOB 134
+#define TK_FLOAT 132
+#define TK_BLOB 133
+#define TK_INTEGER 134
#define TK_VARIABLE 135
#define TK_CASE 136
#define TK_WHEN 137
#define TK_INDEX 140
#define TK_ALTER 141
#define TK_ADD 142
-#define TK_TO_TEXT 143
-#define TK_TO_BLOB 144
-#define TK_TO_NUMERIC 145
-#define TK_TO_INT 146
-#define TK_TO_REAL 147
-#define TK_ISNOT 148
-#define TK_END_OF_FILE 149
-#define TK_ILLEGAL 150
-#define TK_SPACE 151
-#define TK_UNCLOSED_STRING 152
-#define TK_FUNCTION 153
-#define TK_COLUMN 154
-#define TK_AGG_FUNCTION 155
-#define TK_AGG_COLUMN 156
-#define TK_UMINUS 157
-#define TK_UPLUS 158
-#define TK_REGISTER 159
+#define TK_TRUEFALSE 143
+#define TK_ISNOT 144
+#define TK_FUNCTION 145
+#define TK_COLUMN 146
+#define TK_AGG_FUNCTION 147
+#define TK_AGG_COLUMN 148
+#define TK_UMINUS 149
+#define TK_UPLUS 150
+#define TK_TRUTH 151
+#define TK_REGISTER 152
+#define TK_VECTOR 153
+#define TK_SELECT_COLUMN 154
+#define TK_IF_NULL_ROW 155
+#define TK_ASTERISK 156
+#define TK_SPAN 157
+#define TK_END_OF_FILE 158
+#define TK_UNCLOSED_STRING 159
+#define TK_SPACE 160
+#define TK_ILLEGAL 161
+
+/* The token codes above must all fit in 8 bits */
+#define TKFLG_MASK 0xff
+
+/* Flags that can be added to a token code when it is not
+** being stored in a u8: */
+#define TKFLG_DONTFOLD 0x100 /* Omit constant folding optimizations */
/************** End of parse.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
#include <assert.h>
#include <stddef.h>
+/*
+** Use a macro to replace memcpy() if compiled with SQLITE_INLINE_MEMCPY.
+** This allows better measurements of where memcpy() is used when running
+** cachegrind. But this macro version of memcpy() is very slow so it
+** should not be used in production. This is a performance measurement
+** hack only.
+*/
+#ifdef SQLITE_INLINE_MEMCPY
+# define memcpy(D,S,N) {char*xxd=(char*)(D);const char*xxs=(const char*)(S);\
+ int xxn=(N);while(xxn-->0)*(xxd++)=*(xxs++);}
+#endif
+
/*
** If compiling for a processor that lacks floating point support,
** substitute integer for floating-point
/*
** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0
-** afterward. Having this macro allows us to cause the C compiler
+** afterward. Having this macro allows us to cause the C compiler
** to omit code used by TEMP tables without messy #ifndef statements.
*/
#ifdef SQLITE_OMIT_TEMPDB
*/
#ifndef SQLITE_TEMP_STORE
# define SQLITE_TEMP_STORE 1
-# define SQLITE_TEMP_STORE_xc 1 /* Exclude from ctime.c */
#endif
/*
** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if
-** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it
+** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it
** to zero.
*/
#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0
** pagecaches for each database connection. A positive number is the
** number of pages. A negative number N translations means that a buffer
** of -1024*N bytes is allocated and used for as many pages as it will hold.
+**
+** The default value of "20" was choosen to minimize the run-time of the
+** speedtest1 test program with options: --shrink-memory --reprepare
*/
#ifndef SQLITE_DEFAULT_PCACHE_INITSZ
-# define SQLITE_DEFAULT_PCACHE_INITSZ 100
+# define SQLITE_DEFAULT_PCACHE_INITSZ 20
#endif
+/*
+** The compile-time options SQLITE_MMAP_READWRITE and
+** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another.
+** You must choose one or the other (or neither) but not both.
+*/
+#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+#endif
/*
** GCC does not define the offsetof() macro so we'll have to do it
/*
** Macros to compute minimum and maximum of two numbers.
*/
-#define MIN(A,B) ((A)<(B)?(A):(B))
-#define MAX(A,B) ((A)>(B)?(A):(B))
+#ifndef MIN
+# define MIN(A,B) ((A)<(B)?(A):(B))
+#endif
+#ifndef MAX
+# define MAX(A,B) ((A)>(B)?(A):(B))
+#endif
/*
** Swap two objects of type TYPE.
** 4 -> 20 1000 -> 99 1048576 -> 200
** 10 -> 33 1024 -> 100 4294967296 -> 320
**
-** The LogEst can be negative to indicate fractional values.
+** The LogEst can be negative to indicate fractional values.
** Examples:
**
** 0.5 -> -10 0.1 -> -33 0.0625 -> -40
# endif
#endif
+/* The uptr type is an unsigned integer large enough to hold a pointer
+*/
+#if defined(HAVE_STDINT_H)
+ typedef uintptr_t uptr;
+#elif SQLITE_PTRSIZE==4
+ typedef u32 uptr;
+#else
+ typedef u64 uptr;
+#endif
+
+/*
+** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to
+** something between S (inclusive) and E (exclusive).
+**
+** In other words, S is a buffer and E is a pointer to the first byte after
+** the end of buffer S. This macro returns true if P points to something
+** contained within the buffer S.
+*/
+#define SQLITE_WITHIN(P,S,E) (((uptr)(P)>=(uptr)(S))&&((uptr)(P)<(uptr)(E)))
+
+
/*
** Macros to determine whether the machine is big or little endian,
** and whether or not that determination is run-time or compile-time.
**
** For best performance, an attempt is made to guess at the byte-order
** using C-preprocessor macros. If that is unsuccessful, or if
-** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined
+** -DSQLITE_BYTEORDER=0 is set, then byte-order is determined
** at run-time.
*/
-#ifdef SQLITE_AMALGAMATION
-SQLITE_PRIVATE const int sqlite3one = 1;
-#else
-SQLITE_PRIVATE const int sqlite3one;
-#endif
-#if (defined(i386) || defined(__i386__) || defined(_M_IX86) || \
+#ifndef SQLITE_BYTEORDER
+# if defined(i386) || defined(__i386__) || defined(_M_IX86) || \
defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \
defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \
- defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER 1234
-# define SQLITE_BIGENDIAN 0
-# define SQLITE_LITTLEENDIAN 1
-# define SQLITE_UTF16NATIVE SQLITE_UTF16LE
+ defined(__arm__)
+# define SQLITE_BYTEORDER 1234
+# elif defined(sparc) || defined(__ppc__)
+# define SQLITE_BYTEORDER 4321
+# else
+# define SQLITE_BYTEORDER 0
+# endif
#endif
-#if (defined(sparc) || defined(__ppc__)) \
- && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER 4321
+#if SQLITE_BYTEORDER==4321
# define SQLITE_BIGENDIAN 1
# define SQLITE_LITTLEENDIAN 0
# define SQLITE_UTF16NATIVE SQLITE_UTF16BE
-#endif
-#if !defined(SQLITE_BYTEORDER)
-# define SQLITE_BYTEORDER 0 /* 0 means "unknown at compile-time" */
+#elif SQLITE_BYTEORDER==1234
+# define SQLITE_BIGENDIAN 0
+# define SQLITE_LITTLEENDIAN 1
+# define SQLITE_UTF16NATIVE SQLITE_UTF16LE
+#else
+# ifdef SQLITE_AMALGAMATION
+ const int sqlite3one = 1;
+# else
+ extern const int sqlite3one;
+# endif
# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0)
# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1)
# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32))
#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64)
-/*
+/*
** Round up a number to the next larger multiple of 8. This is used
** to force 8-byte alignment on 64-bit architectures.
*/
*/
#ifdef __APPLE__
# include <TargetConditionals.h>
-# if TARGET_OS_IPHONE
-# undef SQLITE_MAX_MMAP_SIZE
-# define SQLITE_MAX_MMAP_SIZE 0
-# endif
#endif
#ifndef SQLITE_MAX_MMAP_SIZE
# if defined(__linux__) \
# else
# define SQLITE_MAX_MMAP_SIZE 0
# endif
-# define SQLITE_MAX_MMAP_SIZE_xc 1 /* exclude from ctime.c */
#endif
/*
*/
#ifndef SQLITE_DEFAULT_MMAP_SIZE
# define SQLITE_DEFAULT_MMAP_SIZE 0
-# define SQLITE_DEFAULT_MMAP_SIZE_xc 1 /* Exclude from ctime.c */
#endif
#if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE
# undef SQLITE_DEFAULT_MMAP_SIZE
** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not
** the Select query generator tracing logic is turned on.
*/
-#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE)
+#if defined(SQLITE_ENABLE_SELECTTRACE)
# define SELECTTRACE_ENABLED 1
#else
# define SELECTTRACE_ENABLED 0
/*
** An instance of the following structure is used to store the busy-handler
-** callback for a given sqlite handle.
+** callback for a given sqlite handle.
**
** The sqlite.busyHandler member of the sqlite struct contains the busy
** callback for the database handle. Each pager opened via the sqlite
*/
typedef struct BusyHandler BusyHandler;
struct BusyHandler {
- int (*xFunc)(void *,int); /* The busy callback */
- void *pArg; /* First arg to busy callback */
- int nBusy; /* Incremented with each busy call */
+ int (*xBusyHandler)(void *,int); /* The busy callback */
+ void *pBusyArg; /* First arg to busy callback */
+ int nBusy; /* Incremented with each busy call */
+ u8 bExtraFileArg; /* Include sqlite3_file as callback arg */
};
/*
/*
** The following value as a destructor means to use sqlite3DbFree().
-** The sqlite3DbFree() routine requires two parameters instead of the
-** one parameter that destructors normally want. So we have to introduce
-** this magic value that the code knows to handle differently. Any
+** The sqlite3DbFree() routine requires two parameters instead of the
+** one parameter that destructors normally want. So we have to introduce
+** this magic value that the code knows to handle differently. Any
** pointer will work here as long as it is distinct from SQLITE_STATIC
** and SQLITE_TRANSIENT.
*/
#define SQLITE_WSD const
#define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
#define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
-SQLITE_API int SQLITE_STDCALL sqlite3_wsd_init(int N, int J);
-SQLITE_API void *SQLITE_STDCALL sqlite3_wsd_find(void *K, int L);
+SQLITE_API int sqlite3_wsd_init(int N, int J);
+SQLITE_API void *sqlite3_wsd_find(void *K, int L);
#else
- #define SQLITE_WSD
+ #define SQLITE_WSD
#define GLOBAL(t,v) v
#define sqlite3GlobalConfig sqlite3Config
#endif
/*
** The following macros are used to suppress compiler warnings and to
-** make it clear to human readers when a function parameter is deliberately
+** make it clear to human readers when a function parameter is deliberately
** left unused within the body of a function. This usually happens when
-** a function is called via a function pointer. For example the
+** a function is called via a function pointer. For example the
** implementation of an SQL aggregate step callback may not use the
** parameter indicating the number of arguments passed to the aggregate,
** if it knows that this is enforced elsewhere.
typedef struct Schema Schema;
typedef struct Expr Expr;
typedef struct ExprList ExprList;
-typedef struct ExprSpan ExprSpan;
typedef struct FKey FKey;
typedef struct FuncDestructor FuncDestructor;
typedef struct FuncDef FuncDef;
typedef struct Module Module;
typedef struct NameContext NameContext;
typedef struct Parse Parse;
+typedef struct PreUpdate PreUpdate;
typedef struct PrintfArguments PrintfArguments;
typedef struct RowSet RowSet;
typedef struct Savepoint Savepoint;
typedef struct WhereInfo WhereInfo;
typedef struct With With;
+/* A VList object records a mapping between parameters/variables/wildcards
+** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer
+** variable number associated with that parameter. See the format description
+** on the sqlite3VListAdd() routine for more information. A VList is really
+** just an array of integers.
+*/
+typedef int VList;
+
/*
-** Defer sourcing vdbe.h and btree.h until after the "u8" and
+** Defer sourcing vdbe.h and btree.h until after the "u8" and
** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
** pointer types (i.e. FuncDef) defined above.
*/
** subsystem. See comments in the source code for a detailed description
** of what each interface routine does.
*/
-#ifndef _BTREE_H_
-#define _BTREE_H_
+#ifndef SQLITE_BTREE_H
+#define SQLITE_BTREE_H
/* TODO: This definition is just included so other modules compile. It
** needs to be revisited.
typedef struct Btree Btree;
typedef struct BtCursor BtCursor;
typedef struct BtShared BtShared;
+typedef struct BtreePayload BtreePayload;
SQLITE_PRIVATE int sqlite3BtreeOpen(
SQLITE_PRIVATE int sqlite3BtreeClose(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int);
+SQLITE_PRIVATE int sqlite3BtreeSetSpillSize(Btree*,int);
#if SQLITE_MAX_MMAP_SIZE>0
SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
#endif
SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned);
-SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*);
SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*);
SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *));
SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree);
+#ifndef SQLITE_OMIT_SHARED_CACHE
SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock);
+#endif
SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int);
SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *);
#define BTREE_DATA_VERSION 15 /* A virtual meta-value */
/*
-** Values that may be OR'd together to form the second argument of an
-** sqlite3BtreeCursorHints() call.
+** Kinds of hints that can be passed into the sqlite3BtreeCursorHint()
+** interface.
+**
+** BTREE_HINT_RANGE (arguments: Expr*, Mem*)
+**
+** The first argument is an Expr* (which is guaranteed to be constant for
+** the lifetime of the cursor) that defines constraints on which rows
+** might be fetched with this cursor. The Expr* tree may contain
+** TK_REGISTER nodes that refer to values stored in the array of registers
+** passed as the second parameter. In other words, if Expr.op==TK_REGISTER
+** then the value of the node is the value in Mem[pExpr.iTable]. Any
+** TK_COLUMN node in the expression tree refers to the Expr.iColumn-th
+** column of the b-tree of the cursor. The Expr tree will not contain
+** any function calls nor subqueries nor references to b-trees other than
+** the cursor being hinted.
+**
+** The design of the _RANGE hint is aid b-tree implementations that try
+** to prefetch content from remote machines - to provide those
+** implementations with limits on what needs to be prefetched and thereby
+** reduce network bandwidth.
+**
+** Note that BTREE_HINT_FLAGS with BTREE_BULKLOAD is the only hint used by
+** standard SQLite. The other hints are provided for extentions that use
+** the SQLite parser and code generator but substitute their own storage
+** engine.
+*/
+#define BTREE_HINT_RANGE 0 /* Range constraints on queries */
+
+/*
+** Values that may be OR'd together to form the argument to the
+** BTREE_HINT_FLAGS hint for sqlite3BtreeCursorHint():
**
** The BTREE_BULKLOAD flag is set on index cursors when the index is going
** to be filled with content that is already in sorted order.
#define BTREE_BULKLOAD 0x00000001 /* Used to full index in sorted order */
#define BTREE_SEEK_EQ 0x00000002 /* EQ seeks only - no range seeks */
+/*
+** Flags passed as the third argument to sqlite3BtreeCursor().
+**
+** For read-only cursors the wrFlag argument is always zero. For read-write
+** cursors it may be set to either (BTREE_WRCSR|BTREE_FORDELETE) or just
+** (BTREE_WRCSR). If the BTREE_FORDELETE bit is set, then the cursor will
+** only be used by SQLite for the following:
+**
+** * to seek to and then delete specific entries, and/or
+**
+** * to read values that will be used to create keys that other
+** BTREE_FORDELETE cursors will seek to and delete.
+**
+** The BTREE_FORDELETE flag is an optimization hint. It is not used by
+** by this, the native b-tree engine of SQLite, but it is available to
+** alternative storage engines that might be substituted in place of this
+** b-tree system. For alternative storage engines in which a delete of
+** the main table row automatically deletes corresponding index rows,
+** the FORDELETE flag hint allows those alternative storage engines to
+** skip a lot of work. Namely: FORDELETE cursors may treat all SEEK
+** and DELETE operations as no-ops, and any READ operation against a
+** FORDELETE cursor may return a null row: 0x01 0x00.
+*/
+#define BTREE_WRCSR 0x00000004 /* read-write cursor */
+#define BTREE_FORDELETE 0x00000008 /* Cursor is for seek/delete only */
+
SQLITE_PRIVATE int sqlite3BtreeCursor(
Btree*, /* BTree containing table to open */
int iTable, /* Index of root page */
struct KeyInfo*, /* First argument to compare function */
BtCursor *pCursor /* Space to write cursor structure */
);
+SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void);
SQLITE_PRIVATE int sqlite3BtreeCursorSize(void);
SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*);
+SQLITE_PRIVATE void sqlite3BtreeCursorHintFlags(BtCursor*, unsigned);
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+SQLITE_PRIVATE void sqlite3BtreeCursorHint(BtCursor*, int, ...);
+#endif
SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor*);
SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
);
SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*);
SQLITE_PRIVATE int sqlite3BtreeCursorRestore(BtCursor*, int*);
-SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*, int);
-SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey,
- const void *pData, int nData,
- int nZero, int bias, int seekResult);
+SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*, u8 flags);
+
+/* Allowed flags for sqlite3BtreeDelete() and sqlite3BtreeInsert() */
+#define BTREE_SAVEPOSITION 0x02 /* Leave cursor pointing at NEXT or PREV */
+#define BTREE_AUXDELETE 0x04 /* not the primary delete operation */
+#define BTREE_APPEND 0x08 /* Insert is likely an append */
+
+/* An instance of the BtreePayload object describes the content of a single
+** entry in either an index or table btree.
+**
+** Index btrees (used for indexes and also WITHOUT ROWID tables) contain
+** an arbitrary key and no data. These btrees have pKey,nKey set to their
+** key and pData,nData,nZero set to zero.
+**
+** Table btrees (used for rowid tables) contain an integer rowid used as
+** the key and passed in the nKey field. The pKey field is zero.
+** pData,nData hold the content of the new entry. nZero extra zero bytes
+** are appended to the end of the content when constructing the entry.
+**
+** This object is used to pass information into sqlite3BtreeInsert(). The
+** same information used to be passed as five separate parameters. But placing
+** the information into this object helps to keep the interface more
+** organized and understandable, and it also helps the resulting code to
+** run a little faster by using fewer registers for parameter passing.
+*/
+struct BtreePayload {
+ const void *pKey; /* Key content for indexes. NULL for tables */
+ sqlite3_int64 nKey; /* Size of pKey for indexes. PRIMARY KEY for tabs */
+ const void *pData; /* Data for tables. NULL for indexes */
+ sqlite3_value *aMem; /* First of nMem value in the unpacked pKey */
+ u16 nMem; /* Number of aMem[] value. Might be zero */
+ int nData; /* Size of pData. 0 if none. */
+ int nZero; /* Extra zero data appended after pData,nData */
+};
+
+SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const BtreePayload *pPayload,
+ int flags, int seekResult);
SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes);
SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes);
+SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int flags);
SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*);
-SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize);
-SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*);
-SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize);
-SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*);
+SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int flags);
+SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor*);
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
+SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor*);
+#endif
+SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor*, u32 offset, u32 amt, void*);
+SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor*, u32 *pAmt);
+SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor*);
SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*);
SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*);
+SQLITE_PRIVATE i64 sqlite3BtreeRowCountEst(BtCursor*);
+#ifndef SQLITE_OMIT_INCRBLOB
+SQLITE_PRIVATE int sqlite3BtreePayloadChecked(BtCursor*, u32 offset, u32 amt, void*);
SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *);
+#endif
SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *);
SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
-SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *, unsigned int mask);
-#ifdef SQLITE_DEBUG
SQLITE_PRIVATE int sqlite3BtreeCursorHasHint(BtCursor*, unsigned int mask);
-#endif
SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *pBt);
SQLITE_PRIVATE int sqlite3HeaderSizeBtree(void);
#ifndef NDEBUG
SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*);
#endif
+SQLITE_PRIVATE int sqlite3BtreeCursorIsValidNN(BtCursor*);
#ifndef SQLITE_OMIT_BTREECOUNT
SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *);
#ifndef SQLITE_OMIT_SHARED_CACHE
SQLITE_PRIVATE void sqlite3BtreeEnter(Btree*);
SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*);
+SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*);
+SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*);
+SQLITE_PRIVATE int sqlite3BtreeConnectionCount(Btree*);
#else
# define sqlite3BtreeEnter(X)
# define sqlite3BtreeEnterAll(X)
+# define sqlite3BtreeSharable(X) 0
+# define sqlite3BtreeEnterCursor(X)
+# define sqlite3BtreeConnectionCount(X) 1
#endif
#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE
-SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*);
SQLITE_PRIVATE void sqlite3BtreeLeave(Btree*);
-SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*);
SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor*);
SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3*);
#ifndef NDEBUG
#endif
#else
-# define sqlite3BtreeSharable(X) 0
# define sqlite3BtreeLeave(X)
-# define sqlite3BtreeEnterCursor(X)
# define sqlite3BtreeLeaveCursor(X)
# define sqlite3BtreeLeaveAll(X)
#endif
-#endif /* _BTREE_H_ */
+#endif /* SQLITE_BTREE_H */
/************** End of btree.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** or VDBE. The VDBE implements an abstract machine that runs a
** simple program to access and modify the underlying database.
*/
-#ifndef _SQLITE_VDBE_H_
-#define _SQLITE_VDBE_H_
+#ifndef SQLITE_VDBE_H
+#define SQLITE_VDBE_H
/* #include <stdio.h> */
/*
** The names of the following types declared in vdbeInt.h are required
** for the VdbeOp definition.
*/
-typedef struct Mem Mem;
+typedef struct sqlite3_value Mem;
typedef struct SubProgram SubProgram;
/*
struct VdbeOp {
u8 opcode; /* What operation to perform */
signed char p4type; /* One of the P4_xxx constants for p4 */
- u8 opflags; /* Mask of the OPFLG_* flags in opcodes.h */
- u8 p5; /* Fifth parameter is an unsigned character */
+ u16 p5; /* Fifth parameter is an unsigned 16-bit integer */
int p1; /* First operand */
int p2; /* Second parameter (often the jump destination) */
int p3; /* The third parameter */
KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */
int *ai; /* Used when p4type is P4_INTARRAY */
SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */
- int (*xAdvance)(BtCursor *, int *);
+ Table *pTab; /* Used when p4type is P4_TABLE */
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+ Expr *pExpr; /* Used when p4type is P4_EXPR */
+#endif
+ int (*xAdvance)(BtCursor *, int);
} p4;
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
char *zComment; /* Comment to improve readability */
int nOp; /* Elements in aOp[] */
int nMem; /* Number of memory cells required */
int nCsr; /* Number of cursors required */
- int nOnce; /* Number of OP_Once instructions */
+ u8 *aOnce; /* Array of OP_Once flags */
void *token; /* id that may be used to recursive triggers */
SubProgram *pNext; /* Next sub-program already visited */
};
/*
** Allowed values of VdbeOp.p4type
*/
-#define P4_NOTUSED 0 /* The P4 parameter is not used */
-#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */
-#define P4_STATIC (-2) /* Pointer to a static string */
-#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */
-#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */
-#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */
-#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */
-#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */
-#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */
-#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */
-#define P4_REAL (-12) /* P4 is a 64-bit floating point value */
-#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */
-#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */
-#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */
-#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */
-#define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */
-#define P4_FUNCCTX (-20) /* P4 is a pointer to an sqlite3_context object */
+#define P4_NOTUSED 0 /* The P4 parameter is not used */
+#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */
+#define P4_STATIC (-1) /* Pointer to a static string */
+#define P4_COLLSEQ (-2) /* P4 is a pointer to a CollSeq structure */
+#define P4_INT32 (-3) /* P4 is a 32-bit signed integer */
+#define P4_SUBPROGRAM (-4) /* P4 is a pointer to a SubProgram structure */
+#define P4_ADVANCE (-5) /* P4 is a pointer to BtreeNext() or BtreePrev() */
+#define P4_TABLE (-6) /* P4 is a pointer to a Table structure */
+/* Above do not own any resources. Must free those below */
+#define P4_FREE_IF_LE (-7)
+#define P4_DYNAMIC (-7) /* Pointer to memory from sqliteMalloc() */
+#define P4_FUNCDEF (-8) /* P4 is a pointer to a FuncDef structure */
+#define P4_KEYINFO (-9) /* P4 is a pointer to a KeyInfo structure */
+#define P4_EXPR (-10) /* P4 is a pointer to an Expr tree */
+#define P4_MEM (-11) /* P4 is a pointer to a Mem* structure */
+#define P4_VTAB (-12) /* P4 is a pointer to an sqlite3_vtab structure */
+#define P4_REAL (-13) /* P4 is a 64-bit floating point value */
+#define P4_INT64 (-14) /* P4 is a 64-bit signed integer */
+#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */
+#define P4_FUNCCTX (-16) /* P4 is a pointer to an sqlite3_context object */
+#define P4_DYNBLOB (-17) /* Pointer to memory from sqliteMalloc() */
/* Error message codes for OP_Halt */
#define P5_ConstraintNotNull 1
/************** Include opcodes.h in the middle of vdbe.h ********************/
/************** Begin file opcodes.h *****************************************/
/* Automatically generated. Do not edit */
-/* See the mkopcodeh.awk script for details */
-#define OP_Savepoint 1
-#define OP_AutoCommit 2
-#define OP_Transaction 3
-#define OP_SorterNext 4
-#define OP_PrevIfOpen 5
-#define OP_NextIfOpen 6
-#define OP_Prev 7
-#define OP_Next 8
-#define OP_Checkpoint 9
-#define OP_JournalMode 10
-#define OP_Vacuum 11
-#define OP_VFilter 12 /* synopsis: iplan=r[P3] zplan='P4' */
-#define OP_VUpdate 13 /* synopsis: data=r[P3@P2] */
-#define OP_Goto 14
-#define OP_Gosub 15
-#define OP_Return 16
-#define OP_InitCoroutine 17
-#define OP_EndCoroutine 18
+/* See the tool/mkopcodeh.tcl script for details */
+#define OP_Savepoint 0
+#define OP_AutoCommit 1
+#define OP_Transaction 2
+#define OP_SorterNext 3 /* jump */
+#define OP_PrevIfOpen 4 /* jump */
+#define OP_NextIfOpen 5 /* jump */
+#define OP_Prev 6 /* jump */
+#define OP_Next 7 /* jump */
+#define OP_Checkpoint 8
+#define OP_JournalMode 9
+#define OP_Vacuum 10
+#define OP_VFilter 11 /* jump, synopsis: iplan=r[P3] zplan='P4' */
+#define OP_VUpdate 12 /* synopsis: data=r[P3@P2] */
+#define OP_Goto 13 /* jump */
+#define OP_Gosub 14 /* jump */
+#define OP_InitCoroutine 15 /* jump */
+#define OP_Yield 16 /* jump */
+#define OP_MustBeInt 17 /* jump */
+#define OP_Jump 18 /* jump */
#define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */
-#define OP_Yield 20
-#define OP_HaltIfNull 21 /* synopsis: if r[P3]=null halt */
-#define OP_Halt 22
-#define OP_Integer 23 /* synopsis: r[P2]=P1 */
-#define OP_Int64 24 /* synopsis: r[P2]=P4 */
-#define OP_String 25 /* synopsis: r[P2]='P4' (len=P1) */
-#define OP_Null 26 /* synopsis: r[P2..P3]=NULL */
-#define OP_SoftNull 27 /* synopsis: r[P1]=NULL */
-#define OP_Blob 28 /* synopsis: r[P2]=P4 (len=P1) */
-#define OP_Variable 29 /* synopsis: r[P2]=parameter(P1,P4) */
-#define OP_Move 30 /* synopsis: r[P2@P3]=r[P1@P3] */
-#define OP_Copy 31 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */
-#define OP_SCopy 32 /* synopsis: r[P2]=r[P1] */
-#define OP_ResultRow 33 /* synopsis: output=r[P1@P2] */
-#define OP_CollSeq 34
-#define OP_Function0 35 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_Function 36 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_AddImm 37 /* synopsis: r[P1]=r[P1]+P2 */
-#define OP_MustBeInt 38
-#define OP_RealAffinity 39
-#define OP_Cast 40 /* synopsis: affinity(r[P1]) */
-#define OP_Permutation 41
-#define OP_Compare 42 /* synopsis: r[P1@P3] <-> r[P2@P3] */
-#define OP_Jump 43
-#define OP_Once 44
-#define OP_If 45
-#define OP_IfNot 46
-#define OP_Column 47 /* synopsis: r[P3]=PX */
-#define OP_Affinity 48 /* synopsis: affinity(r[P1@P2]) */
-#define OP_MakeRecord 49 /* synopsis: r[P3]=mkrec(r[P1@P2]) */
-#define OP_Count 50 /* synopsis: r[P2]=count() */
-#define OP_ReadCookie 51
-#define OP_SetCookie 52
-#define OP_ReopenIdx 53 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenRead 54 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenWrite 55 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenAutoindex 56 /* synopsis: nColumn=P2 */
-#define OP_OpenEphemeral 57 /* synopsis: nColumn=P2 */
-#define OP_SorterOpen 58
-#define OP_SequenceTest 59 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */
-#define OP_OpenPseudo 60 /* synopsis: P3 columns in r[P2] */
-#define OP_Close 61
-#define OP_ColumnsUsed 62
-#define OP_SeekLT 63 /* synopsis: key=r[P3@P4] */
-#define OP_SeekLE 64 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGE 65 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGT 66 /* synopsis: key=r[P3@P4] */
-#define OP_Seek 67 /* synopsis: intkey=r[P2] */
-#define OP_NoConflict 68 /* synopsis: key=r[P3@P4] */
-#define OP_NotFound 69 /* synopsis: key=r[P3@P4] */
-#define OP_Found 70 /* synopsis: key=r[P3@P4] */
-#define OP_Or 71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
-#define OP_And 72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
-#define OP_NotExists 73 /* synopsis: intkey=r[P3] */
-#define OP_Sequence 74 /* synopsis: r[P2]=cursor[P1].ctr++ */
-#define OP_NewRowid 75 /* synopsis: r[P2]=rowid */
-#define OP_IsNull 76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
-#define OP_NotNull 77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
-#define OP_Ne 78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */
-#define OP_Eq 79 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */
-#define OP_Gt 80 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */
-#define OP_Le 81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */
-#define OP_Lt 82 /* same as TK_LT, synopsis: if r[P1]<r[P3] goto P2 */
-#define OP_Ge 83 /* same as TK_GE, synopsis: if r[P1]>=r[P3] goto P2 */
-#define OP_Insert 84 /* synopsis: intkey=r[P3] data=r[P2] */
-#define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
-#define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
-#define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
-#define OP_ShiftRight 88 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */
-#define OP_Add 89 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */
-#define OP_Subtract 90 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */
-#define OP_Multiply 91 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */
-#define OP_Divide 92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
-#define OP_Remainder 93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
-#define OP_Concat 94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
-#define OP_InsertInt 95 /* synopsis: intkey=P3 data=r[P2] */
-#define OP_BitNot 96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
+#define OP_Once 20 /* jump */
+#define OP_If 21 /* jump */
+#define OP_IfNot 22 /* jump */
+#define OP_IfNullRow 23 /* jump, synopsis: if P1.nullRow then r[P3]=NULL, goto P2 */
+#define OP_SeekLT 24 /* jump, synopsis: key=r[P3@P4] */
+#define OP_SeekLE 25 /* jump, synopsis: key=r[P3@P4] */
+#define OP_SeekGE 26 /* jump, synopsis: key=r[P3@P4] */
+#define OP_SeekGT 27 /* jump, synopsis: key=r[P3@P4] */
+#define OP_NoConflict 28 /* jump, synopsis: key=r[P3@P4] */
+#define OP_NotFound 29 /* jump, synopsis: key=r[P3@P4] */
+#define OP_Found 30 /* jump, synopsis: key=r[P3@P4] */
+#define OP_SeekRowid 31 /* jump, synopsis: intkey=r[P3] */
+#define OP_NotExists 32 /* jump, synopsis: intkey=r[P3] */
+#define OP_Last 33 /* jump */
+#define OP_IfSmaller 34 /* jump */
+#define OP_SorterSort 35 /* jump */
+#define OP_Sort 36 /* jump */
+#define OP_Rewind 37 /* jump */
+#define OP_IdxLE 38 /* jump, synopsis: key=r[P3@P4] */
+#define OP_IdxGT 39 /* jump, synopsis: key=r[P3@P4] */
+#define OP_IdxLT 40 /* jump, synopsis: key=r[P3@P4] */
+#define OP_IdxGE 41 /* jump, synopsis: key=r[P3@P4] */
+#define OP_RowSetRead 42 /* jump, synopsis: r[P3]=rowset(P1) */
+#define OP_Or 43 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
+#define OP_And 44 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
+#define OP_RowSetTest 45 /* jump, synopsis: if r[P3] in rowset(P1) goto P2 */
+#define OP_Program 46 /* jump */
+#define OP_FkIfZero 47 /* jump, synopsis: if fkctr[P1]==0 goto P2 */
+#define OP_IfPos 48 /* jump, synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
+#define OP_IfNotZero 49 /* jump, synopsis: if r[P1]!=0 then r[P1]--, goto P2 */
+#define OP_IsNull 50 /* jump, same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
+#define OP_NotNull 51 /* jump, same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
+#define OP_Ne 52 /* jump, same as TK_NE, synopsis: IF r[P3]!=r[P1] */
+#define OP_Eq 53 /* jump, same as TK_EQ, synopsis: IF r[P3]==r[P1] */
+#define OP_Gt 54 /* jump, same as TK_GT, synopsis: IF r[P3]>r[P1] */
+#define OP_Le 55 /* jump, same as TK_LE, synopsis: IF r[P3]<=r[P1] */
+#define OP_Lt 56 /* jump, same as TK_LT, synopsis: IF r[P3]<r[P1] */
+#define OP_Ge 57 /* jump, same as TK_GE, synopsis: IF r[P3]>=r[P1] */
+#define OP_ElseNotEq 58 /* jump, same as TK_ESCAPE */
+#define OP_DecrJumpZero 59 /* jump, synopsis: if (--r[P1])==0 goto P2 */
+#define OP_IncrVacuum 60 /* jump */
+#define OP_VNext 61 /* jump */
+#define OP_Init 62 /* jump, synopsis: Start at P2 */
+#define OP_Return 63
+#define OP_EndCoroutine 64
+#define OP_HaltIfNull 65 /* synopsis: if r[P3]=null halt */
+#define OP_Halt 66
+#define OP_Integer 67 /* synopsis: r[P2]=P1 */
+#define OP_Int64 68 /* synopsis: r[P2]=P4 */
+#define OP_String 69 /* synopsis: r[P2]='P4' (len=P1) */
+#define OP_Null 70 /* synopsis: r[P2..P3]=NULL */
+#define OP_SoftNull 71 /* synopsis: r[P1]=NULL */
+#define OP_Blob 72 /* synopsis: r[P2]=P4 (len=P1) */
+#define OP_Variable 73 /* synopsis: r[P2]=parameter(P1,P4) */
+#define OP_Move 74 /* synopsis: r[P2@P3]=r[P1@P3] */
+#define OP_Copy 75 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */
+#define OP_SCopy 76 /* synopsis: r[P2]=r[P1] */
+#define OP_IntCopy 77 /* synopsis: r[P2]=r[P1] */
+#define OP_ResultRow 78 /* synopsis: output=r[P1@P2] */
+#define OP_CollSeq 79
+#define OP_AddImm 80 /* synopsis: r[P1]=r[P1]+P2 */
+#define OP_RealAffinity 81
+#define OP_Cast 82 /* synopsis: affinity(r[P1]) */
+#define OP_Permutation 83
+#define OP_BitAnd 84 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
+#define OP_BitOr 85 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
+#define OP_ShiftLeft 86 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */
+#define OP_ShiftRight 87 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */
+#define OP_Add 88 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */
+#define OP_Subtract 89 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */
+#define OP_Multiply 90 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */
+#define OP_Divide 91 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
+#define OP_Remainder 92 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
+#define OP_Concat 93 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
+#define OP_Compare 94 /* synopsis: r[P1@P3] <-> r[P2@P3] */
+#define OP_BitNot 95 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
+#define OP_IsTrue 96 /* synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4 */
#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */
-#define OP_Delete 98
-#define OP_ResetCount 99
-#define OP_SorterCompare 100 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
-#define OP_SorterData 101 /* synopsis: r[P2]=data */
-#define OP_RowKey 102 /* synopsis: r[P2]=key */
-#define OP_RowData 103 /* synopsis: r[P2]=data */
-#define OP_Rowid 104 /* synopsis: r[P2]=rowid */
-#define OP_NullRow 105
-#define OP_Last 106
-#define OP_SorterSort 107
-#define OP_Sort 108
-#define OP_Rewind 109
-#define OP_SorterInsert 110
-#define OP_IdxInsert 111 /* synopsis: key=r[P2] */
-#define OP_IdxDelete 112 /* synopsis: key=r[P2@P3] */
-#define OP_IdxRowid 113 /* synopsis: r[P2]=rowid */
-#define OP_IdxLE 114 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGT 115 /* synopsis: key=r[P3@P4] */
-#define OP_IdxLT 116 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGE 117 /* synopsis: key=r[P3@P4] */
-#define OP_Destroy 118
-#define OP_Clear 119
-#define OP_ResetSorter 120
-#define OP_CreateIndex 121 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_CreateTable 122 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_ParseSchema 123
-#define OP_LoadAnalysis 124
-#define OP_DropTable 125
-#define OP_DropIndex 126
-#define OP_DropTrigger 127
-#define OP_IntegrityCk 128
-#define OP_RowSetAdd 129 /* synopsis: rowset(P1)=r[P2] */
-#define OP_RowSetRead 130 /* synopsis: r[P3]=rowset(P1) */
-#define OP_RowSetTest 131 /* synopsis: if r[P3] in rowset(P1) goto P2 */
-#define OP_Program 132
-#define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */
-#define OP_Param 134
-#define OP_FkCounter 135 /* synopsis: fkctr[P1]+=P2 */
-#define OP_FkIfZero 136 /* synopsis: if fkctr[P1]==0 goto P2 */
-#define OP_MemMax 137 /* synopsis: r[P1]=max(r[P1],r[P2]) */
-#define OP_IfPos 138 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
-#define OP_SetIfNotPos 139 /* synopsis: if r[P1]<=0 then r[P2]=P3 */
-#define OP_IfNotZero 140 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
-#define OP_DecrJumpZero 141 /* synopsis: if (--r[P1])==0 goto P2 */
-#define OP_JumpZeroIncr 142 /* synopsis: if (r[P1]++)==0 ) goto P2 */
-#define OP_AggStep0 143 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggStep 144 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggFinal 145 /* synopsis: accum=r[P1] N=P2 */
-#define OP_IncrVacuum 146
-#define OP_Expire 147
-#define OP_TableLock 148 /* synopsis: iDb=P1 root=P2 write=P3 */
-#define OP_VBegin 149
-#define OP_VCreate 150
-#define OP_VDestroy 151
-#define OP_VOpen 152
-#define OP_VColumn 153 /* synopsis: r[P3]=vcolumn(P2) */
-#define OP_VNext 154
-#define OP_VRename 155
-#define OP_Pagecount 156
-#define OP_MaxPgcnt 157
-#define OP_Init 158 /* synopsis: Start at P2 */
-#define OP_Noop 159
-#define OP_Explain 160
-
+#define OP_Offset 98 /* synopsis: r[P3] = sqlite_offset(P1) */
+#define OP_Column 99 /* synopsis: r[P3]=PX */
+#define OP_Affinity 100 /* synopsis: affinity(r[P1@P2]) */
+#define OP_MakeRecord 101 /* synopsis: r[P3]=mkrec(r[P1@P2]) */
+#define OP_Count 102 /* synopsis: r[P2]=count() */
+#define OP_ReadCookie 103
+#define OP_SetCookie 104
+#define OP_ReopenIdx 105 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenRead 106 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenWrite 107 /* synopsis: root=P2 iDb=P3 */
+#define OP_OpenDup 108
+#define OP_OpenAutoindex 109 /* synopsis: nColumn=P2 */
+#define OP_OpenEphemeral 110 /* synopsis: nColumn=P2 */
+#define OP_SorterOpen 111
+#define OP_SequenceTest 112 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */
+#define OP_OpenPseudo 113 /* synopsis: P3 columns in r[P2] */
+#define OP_Close 114
+#define OP_ColumnsUsed 115
+#define OP_Sequence 116 /* synopsis: r[P2]=cursor[P1].ctr++ */
+#define OP_NewRowid 117 /* synopsis: r[P2]=rowid */
+#define OP_Insert 118 /* synopsis: intkey=r[P3] data=r[P2] */
+#define OP_InsertInt 119 /* synopsis: intkey=P3 data=r[P2] */
+#define OP_Delete 120
+#define OP_ResetCount 121
+#define OP_SorterCompare 122 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
+#define OP_SorterData 123 /* synopsis: r[P2]=data */
+#define OP_RowData 124 /* synopsis: r[P2]=data */
+#define OP_Rowid 125 /* synopsis: r[P2]=rowid */
+#define OP_NullRow 126
+#define OP_SeekEnd 127
+#define OP_SorterInsert 128 /* synopsis: key=r[P2] */
+#define OP_IdxInsert 129 /* synopsis: key=r[P2] */
+#define OP_IdxDelete 130 /* synopsis: key=r[P2@P3] */
+#define OP_DeferredSeek 131 /* synopsis: Move P3 to P1.rowid if needed */
+#define OP_Real 132 /* same as TK_FLOAT, synopsis: r[P2]=P4 */
+#define OP_IdxRowid 133 /* synopsis: r[P2]=rowid */
+#define OP_Destroy 134
+#define OP_Clear 135
+#define OP_ResetSorter 136
+#define OP_CreateBtree 137 /* synopsis: r[P2]=root iDb=P1 flags=P3 */
+#define OP_SqlExec 138
+#define OP_ParseSchema 139
+#define OP_LoadAnalysis 140
+#define OP_DropTable 141
+#define OP_DropIndex 142
+#define OP_DropTrigger 143
+#define OP_IntegrityCk 144
+#define OP_RowSetAdd 145 /* synopsis: rowset(P1)=r[P2] */
+#define OP_Param 146
+#define OP_FkCounter 147 /* synopsis: fkctr[P1]+=P2 */
+#define OP_MemMax 148 /* synopsis: r[P1]=max(r[P1],r[P2]) */
+#define OP_OffsetLimit 149 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
+#define OP_AggStep0 150 /* synopsis: accum=r[P3] step(r[P2@P5]) */
+#define OP_AggStep 151 /* synopsis: accum=r[P3] step(r[P2@P5]) */
+#define OP_AggFinal 152 /* synopsis: accum=r[P1] N=P2 */
+#define OP_Expire 153
+#define OP_TableLock 154 /* synopsis: iDb=P1 root=P2 write=P3 */
+#define OP_VBegin 155
+#define OP_VCreate 156
+#define OP_VDestroy 157
+#define OP_VOpen 158
+#define OP_VColumn 159 /* synopsis: r[P3]=vcolumn(P2) */
+#define OP_VRename 160
+#define OP_Pagecount 161
+#define OP_MaxPgcnt 162
+#define OP_PureFunc0 163
+#define OP_Function0 164 /* synopsis: r[P3]=func(r[P2@P5]) */
+#define OP_PureFunc 165
+#define OP_Function 166 /* synopsis: r[P3]=func(r[P2@P5]) */
+#define OP_Trace 167
+#define OP_CursorHint 168
+#define OP_Noop 169
+#define OP_Explain 170
/* Properties such as "out2" or "jump" that are specified in
** comments following the "case" for each opcode in the vdbe.c
** are encoded into bitvectors as follows:
*/
-#define OPFLG_JUMP 0x0001 /* jump: P2 holds jmp target */
-#define OPFLG_IN1 0x0002 /* in1: P1 is an input */
-#define OPFLG_IN2 0x0004 /* in2: P2 is an input */
-#define OPFLG_IN3 0x0008 /* in3: P3 is an input */
-#define OPFLG_OUT2 0x0010 /* out2: P2 is an output */
-#define OPFLG_OUT3 0x0020 /* out3: P3 is an output */
+#define OPFLG_JUMP 0x01 /* jump: P2 holds jmp target */
+#define OPFLG_IN1 0x02 /* in1: P1 is an input */
+#define OPFLG_IN2 0x04 /* in2: P2 is an input */
+#define OPFLG_IN3 0x08 /* in3: P3 is an input */
+#define OPFLG_OUT2 0x10 /* out2: P2 is an output */
+#define OPFLG_OUT3 0x20 /* out3: P3 is an output */
#define OPFLG_INITIALIZER {\
-/* 0 */ 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,\
-/* 8 */ 0x01, 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01,\
-/* 16 */ 0x02, 0x01, 0x02, 0x12, 0x03, 0x08, 0x00, 0x10,\
-/* 24 */ 0x10, 0x10, 0x10, 0x00, 0x10, 0x10, 0x00, 0x00,\
-/* 32 */ 0x10, 0x00, 0x00, 0x00, 0x00, 0x02, 0x03, 0x02,\
-/* 40 */ 0x02, 0x00, 0x00, 0x01, 0x01, 0x03, 0x03, 0x00,\
-/* 48 */ 0x00, 0x00, 0x10, 0x10, 0x08, 0x00, 0x00, 0x00,\
-/* 56 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x09,\
-/* 64 */ 0x09, 0x09, 0x09, 0x04, 0x09, 0x09, 0x09, 0x26,\
-/* 72 */ 0x26, 0x09, 0x10, 0x10, 0x03, 0x03, 0x0b, 0x0b,\
-/* 80 */ 0x0b, 0x0b, 0x0b, 0x0b, 0x00, 0x26, 0x26, 0x26,\
-/* 88 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x00,\
-/* 96 */ 0x12, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 104 */ 0x10, 0x00, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04,\
-/* 112 */ 0x00, 0x10, 0x01, 0x01, 0x01, 0x01, 0x10, 0x00,\
-/* 120 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 128 */ 0x00, 0x06, 0x23, 0x0b, 0x01, 0x10, 0x10, 0x00,\
-/* 136 */ 0x01, 0x04, 0x03, 0x06, 0x03, 0x03, 0x03, 0x00,\
-/* 144 */ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 152 */ 0x00, 0x00, 0x01, 0x00, 0x10, 0x10, 0x01, 0x00,\
-/* 160 */ 0x00,}
+/* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01,\
+/* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x01,\
+/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x01,\
+/* 24 */ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,\
+/* 32 */ 0x09, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,\
+/* 40 */ 0x01, 0x01, 0x23, 0x26, 0x26, 0x0b, 0x01, 0x01,\
+/* 48 */ 0x03, 0x03, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\
+/* 56 */ 0x0b, 0x0b, 0x01, 0x03, 0x01, 0x01, 0x01, 0x02,\
+/* 64 */ 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10, 0x00,\
+/* 72 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
+/* 80 */ 0x02, 0x02, 0x02, 0x00, 0x26, 0x26, 0x26, 0x26,\
+/* 88 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x00, 0x12,\
+/* 96 */ 0x12, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10, 0x10,\
+/* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 112 */ 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
+/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,\
+/* 128 */ 0x04, 0x04, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00,\
+/* 136 */ 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 144 */ 0x00, 0x06, 0x10, 0x00, 0x04, 0x1a, 0x00, 0x00,\
+/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 160 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\
+/* 168 */ 0x00, 0x00, 0x00,}
+
+/* The sqlite3P2Values() routine is able to run faster if it knows
+** the value of the largest JUMP opcode. The smaller the maximum
+** JUMP opcode the better, so the mkopcodeh.tcl script that
+** generated this include file strives to group all JUMP opcodes
+** together near the beginning of the list.
+*/
+#define SQLITE_MX_JUMP_OPCODE 62 /* Maximum JUMP opcode */
/************** End of opcodes.h *********************************************/
/************** Continuing where we left off in vdbe.h ***********************/
+/*
+** Additional non-public SQLITE_PREPARE_* flags
+*/
+#define SQLITE_PREPARE_SAVESQL 0x80 /* Preserve SQL text */
+#define SQLITE_PREPARE_MASK 0x0f /* Mask of public flags */
+
/*
** Prototypes for the VDBE interface. See comments on the implementation
** for a description of what each of these routines does.
SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int);
SQLITE_PRIVATE int sqlite3VdbeAddOp4Dup8(Vdbe*,int,int,int,int,const u8*,int);
SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno);
+SQLITE_PRIVATE void sqlite3VdbeEndCoroutine(Vdbe*,int);
+#if defined(SQLITE_DEBUG) && !defined(SQLITE_TEST_REALLOC_STRESS)
+SQLITE_PRIVATE void sqlite3VdbeVerifyNoMallocRequired(Vdbe *p, int N);
+SQLITE_PRIVATE void sqlite3VdbeVerifyNoResultRow(Vdbe *p);
+#else
+# define sqlite3VdbeVerifyNoMallocRequired(A,B)
+# define sqlite3VdbeVerifyNoResultRow(A)
+#endif
+SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno);
SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*);
SQLITE_PRIVATE void sqlite3VdbeChangeOpcode(Vdbe*, u32 addr, u8);
SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1);
SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, u32 addr, int P2);
SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, u32 addr, int P3);
-SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5);
+SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u16 P5);
SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr);
-SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe*, int addr);
+SQLITE_PRIVATE int sqlite3VdbeChangeToNoop(Vdbe*, int addr);
SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op);
SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N);
+SQLITE_PRIVATE void sqlite3VdbeAppendP4(Vdbe*, void *pP4, int p4type);
SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*);
SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int);
SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int);
SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*);
+SQLITE_PRIVATE void sqlite3VdbeReusable(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3*,Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*);
SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*));
SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*);
SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int);
+SQLITE_PRIVATE u8 sqlite3VdbePrepareFlags(Vdbe*);
+SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, u8);
SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*);
SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*);
SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe*, int, u8);
SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*);
SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*);
SQLITE_PRIVATE int sqlite3VdbeRecordCompareWithSkip(int, const void *, UnpackedRecord *, int);
-SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **);
+SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo*);
typedef int (*RecordCompare)(int,const void*,UnpackedRecord*);
SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*);
SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *);
#endif
+SQLITE_PRIVATE int sqlite3NotPureFunc(sqlite3_context*);
+
/* Use SQLITE_ENABLE_COMMENTS to enable generation of extra comments on
** each VDBE opcode.
**
# define sqlite3VdbeScanStatus(a,b,c,d,e)
#endif
-#endif
+#endif /* SQLITE_VDBE_H */
/************** End of vdbe.h ************************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
** at a time and provides a journal for rollback.
*/
-#ifndef _PAGER_H_
-#define _PAGER_H_
+#ifndef SQLITE_PAGER_H
+#define SQLITE_PAGER_H
/*
** Default maximum size for persistent journal files. A negative
#define PAGER_LOCKINGMODE_EXCLUSIVE 1
/*
-** Numeric constants that encode the journalmode.
+** Numeric constants that encode the journalmode.
+**
+** The numeric values encoded here (other than PAGER_JOURNALMODE_QUERY)
+** are exposed in the API via the "PRAGMA journal_mode" command and
+** therefore cannot be changed without a compatibility break.
*/
#define PAGER_JOURNALMODE_QUERY (-1) /* Query the value of journalmode */
#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */
#define PAGER_JOURNALMODE_WAL 5 /* Use write-ahead logging */
/*
-** Flags that make up the mask passed to sqlite3PagerAcquire().
+** Flags that make up the mask passed to sqlite3PagerGet().
*/
#define PAGER_GET_NOCONTENT 0x01 /* Do not load data from disk */
#define PAGER_GET_READONLY 0x02 /* Read-only page is acceptable */
/*
** Flags for sqlite3PagerSetFlags()
+**
+** Value constraints (enforced via assert()):
+** PAGER_FULLFSYNC == SQLITE_FullFSync
+** PAGER_CKPT_FULLFSYNC == SQLITE_CkptFullFSync
+** PAGER_CACHE_SPILL == SQLITE_CacheSpill
*/
#define PAGER_SYNCHRONOUS_OFF 0x01 /* PRAGMA synchronous=OFF */
#define PAGER_SYNCHRONOUS_NORMAL 0x02 /* PRAGMA synchronous=NORMAL */
#define PAGER_SYNCHRONOUS_FULL 0x03 /* PRAGMA synchronous=FULL */
-#define PAGER_SYNCHRONOUS_MASK 0x03 /* Mask for three values above */
-#define PAGER_FULLFSYNC 0x04 /* PRAGMA fullfsync=ON */
-#define PAGER_CKPT_FULLFSYNC 0x08 /* PRAGMA checkpoint_fullfsync=ON */
-#define PAGER_CACHESPILL 0x10 /* PRAGMA cache_spill=ON */
-#define PAGER_FLAGS_MASK 0x1c /* All above except SYNCHRONOUS */
+#define PAGER_SYNCHRONOUS_EXTRA 0x04 /* PRAGMA synchronous=EXTRA */
+#define PAGER_SYNCHRONOUS_MASK 0x07 /* Mask for four values above */
+#define PAGER_FULLFSYNC 0x08 /* PRAGMA fullfsync=ON */
+#define PAGER_CKPT_FULLFSYNC 0x10 /* PRAGMA checkpoint_fullfsync=ON */
+#define PAGER_CACHESPILL 0x20 /* PRAGMA cache_spill=ON */
+#define PAGER_FLAGS_MASK 0x38 /* All above except SYNCHRONOUS */
/*
** The remainder of this file contains the declarations of the functions
int,
void(*)(DbPage*)
);
-SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager);
+SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3*);
SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*);
/* Functions used to configure a Pager object. */
-SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *);
+SQLITE_PRIVATE void sqlite3PagerSetBusyHandler(Pager*, int(*)(void *), void *);
SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int);
#ifdef SQLITE_HAS_CODEC
SQLITE_PRIVATE void sqlite3PagerAlignReserve(Pager*,Pager*);
#endif
SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int);
SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int);
+SQLITE_PRIVATE int sqlite3PagerSetSpillsize(Pager*, int);
SQLITE_PRIVATE void sqlite3PagerSetMmapLimit(Pager *, sqlite3_int64);
SQLITE_PRIVATE void sqlite3PagerShrink(Pager*);
SQLITE_PRIVATE void sqlite3PagerSetFlags(Pager*,unsigned);
SQLITE_PRIVATE int sqlite3PagerOkToChangeJournalMode(Pager*);
SQLITE_PRIVATE i64 sqlite3PagerJournalSizeLimit(Pager *, i64);
SQLITE_PRIVATE sqlite3_backup **sqlite3PagerBackupPtr(Pager*);
+SQLITE_PRIVATE int sqlite3PagerFlush(Pager*);
/* Functions used to obtain and release page references. */
-SQLITE_PRIVATE int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag);
-#define sqlite3PagerGet(A,B,C) sqlite3PagerAcquire(A,B,C,0)
+SQLITE_PRIVATE int sqlite3PagerGet(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag);
SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno);
SQLITE_PRIVATE void sqlite3PagerRef(DbPage*);
SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*);
SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*);
+SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage*);
/* Operations on page references. */
SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*);
SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager);
#ifndef SQLITE_OMIT_WAL
-SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*);
+SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, sqlite3*, int, int*, int*);
SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager);
SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager);
SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
-SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager);
+SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3*);
+# ifdef SQLITE_DIRECT_OVERFLOW_READ
+SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager, Pgno);
+# endif
+# ifdef SQLITE_ENABLE_SNAPSHOT
+SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
+SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
+SQLITE_PRIVATE int sqlite3PagerSnapshotRecover(Pager *pPager);
+# endif
+#else
+# define sqlite3PagerUseWal(x,y) 0
#endif
#ifdef SQLITE_ENABLE_ZIPVFS
#endif
SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*);
SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*, int);
-SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager*);
+SQLITE_PRIVATE sqlite3_vfs *sqlite3PagerVfs(Pager*);
SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*);
+SQLITE_PRIVATE sqlite3_file *sqlite3PagerJrnlFile(Pager*);
SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*);
-SQLITE_PRIVATE int sqlite3PagerNosync(Pager*);
SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*);
SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*);
SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *);
-SQLITE_PRIVATE void sqlite3PagerClearCache(Pager *);
+SQLITE_PRIVATE void sqlite3PagerClearCache(Pager*);
SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *);
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
+SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager);
+#else
+# define sqlite3PagerResetLockTimeout(X)
+#endif
/* Functions used to truncate the database file. */
SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno);
# define enable_simulated_io_errors()
#endif
-#endif /* _PAGER_H_ */
+#endif /* SQLITE_PAGER_H */
/************** End of pager.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
sqlite3_pcache_page *pPage; /* Pcache object page handle */
void *pData; /* Page data */
void *pExtra; /* Extra content */
- PgHdr *pDirty; /* Transient list of dirty pages */
+ PCache *pCache; /* PRIVATE: Cache that owns this page */
+ PgHdr *pDirty; /* Transient list of dirty sorted by pgno */
Pager *pPager; /* The pager this page is part of */
Pgno pgno; /* Page number for this page */
#ifdef SQLITE_CHECK_PAGES
u16 flags; /* PGHDR flags defined below */
/**********************************************************************
- ** Elements above are public. All that follows is private to pcache.c
- ** and should not be accessed by other modules.
+ ** Elements above, except pCache, are public. All that follow are
+ ** private to pcache.c and should not be accessed by other modules.
+ ** pCache is grouped with the public elements for efficiency.
*/
i16 nRef; /* Number of users of this page */
- PCache *pCache; /* Cache that owns this page */
-
PgHdr *pDirtyNext; /* Next element in list of dirty pages */
PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */
+ /* NB: pDirtyNext and pDirtyPrev are undefined if the
+ ** PgHdr object is not dirty */
};
/* Bit values for PgHdr.flags */
#define PGHDR_WRITEABLE 0x004 /* Journaled and ready to modify */
#define PGHDR_NEED_SYNC 0x008 /* Fsync the rollback journal before
** writing this page to the database */
-#define PGHDR_NEED_READ 0x010 /* Content is unread */
-#define PGHDR_DONT_WRITE 0x020 /* Do not write content to disk */
-#define PGHDR_MMAP 0x040 /* This is an mmap page object */
+#define PGHDR_DONT_WRITE 0x010 /* Do not write content to disk */
+#define PGHDR_MMAP 0x020 /* This is an mmap page object */
+
+#define PGHDR_WAL_APPEND 0x040 /* Appended to wal file */
/* Initialize and shutdown the page cache subsystem */
SQLITE_PRIVATE int sqlite3PcacheInitialize(void);
SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */
SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */
SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */
+SQLITE_PRIVATE void sqlite3PcacheClearWritable(PCache*);
/* Change a page number. Used by incr-vacuum. */
SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno);
SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *));
#endif
+#if defined(SQLITE_DEBUG)
+/* Check invariants on a PgHdr object */
+SQLITE_PRIVATE int sqlite3PcachePageSanity(PgHdr*);
+#endif
+
/* Set and get the suggested cache-size for the specified pager-cache.
**
** If no global maximum is configured, then the system attempts to limit
SQLITE_PRIVATE int sqlite3PcacheGetCachesize(PCache *);
#endif
+/* Set or get the suggested spill-size for the specified pager-cache.
+**
+** The spill-size is the minimum number of pages in cache before the cache
+** will attempt to spill dirty pages by calling xStress.
+*/
+SQLITE_PRIVATE int sqlite3PcacheSetSpillsize(PCache *, int);
+
/* Free up as much memory as possible from the page cache */
SQLITE_PRIVATE void sqlite3PcacheShrink(PCache*);
SQLITE_PRIVATE int sqlite3HeaderSizePcache(void);
SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void);
+/* Number of dirty pages as a percentage of the configured cache size */
+SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache*);
+
#endif /* _PCACHE_H_ */
/************** End of pcache.h **********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
-
/************** Include os.h in the middle of sqliteInt.h ********************/
/************** Begin file os.h **********************************************/
/*
** This file contains pre-processor directives related to operating system
** detection and/or setup.
*/
-#ifndef _OS_SETUP_H_
-#define _OS_SETUP_H_
+#ifndef SQLITE_OS_SETUP_H
+#define SQLITE_OS_SETUP_H
/*
** Figure out if we are dealing with Unix, Windows, or some other operating
# endif
#endif
-#endif /* _OS_SETUP_H_ */
+#endif /* SQLITE_OS_SETUP_H */
/************** End of os_setup.h ********************************************/
/************** Continuing where we left off in os.h *************************/
/*
** Functions for accessing sqlite3_file methods
*/
-SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file*);
+SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file*);
SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset);
SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size);
#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0
SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id);
SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id);
+#ifndef SQLITE_OMIT_WAL
SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **);
SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int);
SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id);
SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int);
+#endif /* SQLITE_OMIT_WAL */
SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **);
SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *);
#endif /* SQLITE_OMIT_LOAD_EXTENSION */
SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *);
SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int);
+SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs*);
SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*);
/*
** sqlite3_malloc() to obtain space for the file-handle structure.
*/
SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*);
-SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *);
+SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *);
#endif /* _SQLITE_OS_H_ */
/************** End of mutex.h ***********************************************/
/************** Continuing where we left off in sqliteInt.h ******************/
+/* The SQLITE_EXTRA_DURABLE compile-time option used to set the default
+** synchronous setting to EXTRA. It is no longer supported.
+*/
+#ifdef SQLITE_EXTRA_DURABLE
+# warning Use SQLITE_DEFAULT_SYNCHRONOUS=3 instead of SQLITE_EXTRA_DURABLE
+# define SQLITE_DEFAULT_SYNCHRONOUS 3
+#endif
+
+/*
+** Default synchronous levels.
+**
+** Note that (for historcal reasons) the PAGER_SYNCHRONOUS_* macros differ
+** from the SQLITE_DEFAULT_SYNCHRONOUS value by 1.
+**
+** PAGER_SYNCHRONOUS DEFAULT_SYNCHRONOUS
+** OFF 1 0
+** NORMAL 2 1
+** FULL 3 2
+** EXTRA 4 3
+**
+** The "PRAGMA synchronous" statement also uses the zero-based numbers.
+** In other words, the zero-based numbers are used for all external interfaces
+** and the one-based values are used internally.
+*/
+#ifndef SQLITE_DEFAULT_SYNCHRONOUS
+# define SQLITE_DEFAULT_SYNCHRONOUS 2
+#endif
+#ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS
+# define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS
+#endif
/*
** Each database file to be accessed by the system is an instance
** databases may be attached.
*/
struct Db {
- char *zName; /* Name of this database */
+ char *zDbSName; /* Name of this database. (schema name, not filename) */
Btree *pBt; /* The B*Tree structure for this database file */
u8 safety_level; /* How aggressive at syncing data to disk */
+ u8 bSyncSet; /* True if "PRAGMA synchronous=N" has been run */
Schema *pSchema; /* Pointer to database schema (possibly shared) */
};
** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing.
** In shared cache mode, a single Schema object can be shared by multiple
** Btrees that refer to the same underlying BtShared object.
-**
+**
** Schema objects are automatically deallocated when the last Btree that
** references them is destroyed. The TEMP Schema is manually freed by
** sqlite3_close().
};
/*
-** These macros can be used to test, set, or clear bits in the
+** These macros can be used to test, set, or clear bits in the
** Db.pSchema->flags field.
*/
#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P))
#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */
#define DB_UnresetViews 0x0002 /* Some views have defined column names */
#define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */
+#define DB_ResetWanted 0x0008 /* Reset the schema when nSchemaLock==0 */
/*
** The number of different kinds of things that can be limited
** lookaside allocations are not used to construct the schema objects.
*/
struct Lookaside {
+ u32 bDisable; /* Only operate the lookaside when zero */
u16 sz; /* Size of each buffer in bytes */
- u8 bEnabled; /* False to disable new lookaside allocations */
u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */
- int nOut; /* Number of buffers currently checked out */
- int mxOut; /* Highwater mark for nOut */
- int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */
+ u32 nSlot; /* Number of lookaside slots allocated */
+ u32 anStat[3]; /* 0: hits. 1: size misses. 2: full misses */
+ LookasideSlot *pInit; /* List of buffers not previously used */
LookasideSlot *pFree; /* List of available buffers */
void *pStart; /* First byte of available memory space */
void *pEnd; /* First byte past end of available space */
};
/*
-** A hash table for function definitions.
+** A hash table for built-in function definitions. (Application-defined
+** functions use a regular table table from hash.h.)
**
** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
-** Collisions are on the FuncDef.pHash chain.
+** Collisions are on the FuncDef.u.pHash chain.
*/
+#define SQLITE_FUNC_HASH_SZ 23
struct FuncDefHash {
- FuncDef *a[23]; /* Hash table for functions */
+ FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */
};
#ifdef SQLITE_USER_AUTHENTICATION
const char*);
#endif
+#ifndef SQLITE_OMIT_DEPRECATED
+/* This is an extra SQLITE_TRACE macro that indicates "legacy" tracing
+** in the style of sqlite3_trace()
+*/
+#define SQLITE_TRACE_LEGACY 0x80
+#else
+#define SQLITE_TRACE_LEGACY 0
+#endif /* SQLITE_OMIT_DEPRECATED */
+
/*
** Each database connection is an instance of the following structure.
sqlite3_mutex *mutex; /* Connection mutex */
Db *aDb; /* All backends */
int nDb; /* Number of backends currently in use */
- int flags; /* Miscellaneous flags. See below */
+ u32 mDbFlags; /* flags recording internal state */
+ u32 flags; /* flags settable by pragmas. See below */
i64 lastRowid; /* ROWID of most recent insert (see above) */
i64 szMmap; /* Default mmap_size setting */
+ u32 nSchemaLock; /* Do not reset the schema when non-zero */
unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */
int errCode; /* Most recent error code (SQLITE_*) */
int errMask; /* & result codes with this before returning */
+ int iSysErrno; /* Errno value from last system error */
u16 dbOptFlags; /* Flags to enable/disable optimizations */
u8 enc; /* Text encoding */
u8 autoCommit; /* The auto-commit flag. */
u8 temp_store; /* 1: file 2: memory 0: default */
u8 mallocFailed; /* True if we have seen a malloc failure */
+ u8 bBenignMalloc; /* Do not require OOMs if true */
u8 dfltLockMode; /* Default locking-mode for attached dbs */
signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */
u8 suppressErr; /* Do not issue error messages if true */
u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */
u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */
+ u8 mTrace; /* zero or more SQLITE_TRACE flags */
+ u8 skipBtreeMutex; /* True if no shared-cache backends */
+ u8 nSqlExec; /* Number of pending OP_SqlExec opcodes */
int nextPagesize; /* Pagesize after VACUUM if >0 */
u32 magic; /* Magic number for detect library misuse */
int nChange; /* Value returned by sqlite3_changes() */
int newTnum; /* Rootpage of table being initialized */
u8 iDb; /* Which db file is being initialized */
u8 busy; /* TRUE if currently initializing */
- u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */
- u8 imposterTable; /* Building an imposter table */
+ unsigned orphanTrigger : 1; /* Last statement is orphaned TEMP trigger */
+ unsigned imposterTable : 1; /* Building an imposter table */
+ unsigned reopenMemdb : 1; /* ATTACH is really a reopen using MemDB */
} init;
int nVdbeActive; /* Number of VDBEs currently running */
int nVdbeRead; /* Number of active VDBEs that read or write */
int nVDestroy; /* Number of active OP_VDestroy operations */
int nExtension; /* Number of loaded extensions */
void **aExtension; /* Array of shared library handles */
- void (*xTrace)(void*,const char*); /* Trace function */
+ int (*xTrace)(u32,void*,void*,void*); /* Trace function */
void *pTraceArg; /* Argument to the trace function */
void (*xProfile)(void*,const char*,u64); /* Profiling function */
void *pProfileArg; /* Argument to profile function */
- void *pCommitArg; /* Argument to xCommitCallback() */
+ void *pCommitArg; /* Argument to xCommitCallback() */
int (*xCommitCallback)(void*); /* Invoked at every commit. */
- void *pRollbackArg; /* Argument to xRollbackCallback() */
+ void *pRollbackArg; /* Argument to xRollbackCallback() */
void (*xRollbackCallback)(void*); /* Invoked at every commit. */
void *pUpdateArg;
void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ void *pPreUpdateArg; /* First argument to xPreUpdateCallback */
+ void (*xPreUpdateCallback)( /* Registered using sqlite3_preupdate_hook() */
+ void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64
+ );
+ PreUpdate *pPreUpdate; /* Context for active pre-update callback */
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
#ifndef SQLITE_OMIT_WAL
int (*xWalCallback)(void *, sqlite3 *, const char *, int);
void *pWalArg;
Hash aModule; /* populated by sqlite3_create_module() */
VtabCtx *pVtabCtx; /* Context for active vtab connect/create */
VTable **aVTrans; /* Virtual tables with open transactions */
- VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */
+ VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */
#endif
- FuncDefHash aFunc; /* Hash table of connection functions */
+ Hash aFunc; /* Hash table of connection functions */
Hash aCollSeq; /* All collating sequences */
BusyHandler busyHandler; /* Busy callback */
Db aDbStatic[2]; /* Static space for the 2 default backends */
i64 nDeferredImmCons; /* Net deferred immediate constraints */
int *pnBytesFreed; /* If not NULL, increment this in DbFree() */
#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
- /* The following variables are all protected by the STATIC_MASTER
- ** mutex, not by sqlite3.mutex. They are used by code in notify.c.
+ /* The following variables are all protected by the STATIC_MASTER
+ ** mutex, not by sqlite3.mutex. They are used by code in notify.c.
**
** When X.pUnlockConnection==Y, that means that X is waiting for Y to
** unlock so that it can proceed.
/*
** Possible values for the sqlite3.flags.
-*/
-#define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */
-#define SQLITE_InternChanges 0x00000002 /* Uncommitted Hash table changes */
-#define SQLITE_FullFSync 0x00000004 /* Use full fsync on the backend */
-#define SQLITE_CkptFullFSync 0x00000008 /* Use full fsync for checkpoint */
-#define SQLITE_CacheSpill 0x00000010 /* OK to spill pager cache */
-#define SQLITE_FullColNames 0x00000020 /* Show full column names on SELECT */
+**
+** Value constraints (enforced via assert()):
+** SQLITE_FullFSync == PAGER_FULLFSYNC
+** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC
+** SQLITE_CacheSpill == PAGER_CACHE_SPILL
+*/
+#define SQLITE_WriteSchema 0x00000001 /* OK to update SQLITE_MASTER */
+#define SQLITE_LegacyFileFmt 0x00000002 /* Create new databases in format 1 */
+#define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */
+#define SQLITE_FullFSync 0x00000008 /* Use full fsync on the backend */
+#define SQLITE_CkptFullFSync 0x00000010 /* Use full fsync for checkpoint */
+#define SQLITE_CacheSpill 0x00000020 /* OK to spill pager cache */
#define SQLITE_ShortColNames 0x00000040 /* Show short columns names */
#define SQLITE_CountRows 0x00000080 /* Count rows changed by INSERT, */
/* DELETE, or UPDATE and return */
/* the count using a callback. */
#define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */
/* result set is empty */
-#define SQLITE_SqlTrace 0x00000200 /* Debug print SQL as it executes */
-#define SQLITE_VdbeListing 0x00000400 /* Debug listings of VDBE programs */
-#define SQLITE_WriteSchema 0x00000800 /* OK to update SQLITE_MASTER */
-#define SQLITE_VdbeAddopTrace 0x00001000 /* Trace sqlite3VdbeAddOp() calls */
-#define SQLITE_IgnoreChecks 0x00002000 /* Do not enforce check constraints */
-#define SQLITE_ReadUncommitted 0x0004000 /* For shared-cache mode */
-#define SQLITE_LegacyFileFmt 0x00008000 /* Create new databases in format 1 */
-#define SQLITE_RecoveryMode 0x00010000 /* Ignore schema errors */
-#define SQLITE_ReverseOrder 0x00020000 /* Reverse unordered SELECTs */
-#define SQLITE_RecTriggers 0x00040000 /* Enable recursive triggers */
-#define SQLITE_ForeignKeys 0x00080000 /* Enforce foreign key constraints */
-#define SQLITE_AutoIndex 0x00100000 /* Enable automatic indexes */
-#define SQLITE_PreferBuiltin 0x00200000 /* Preference to built-in funcs */
-#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */
-#define SQLITE_EnableTrigger 0x00800000 /* True to enable triggers */
-#define SQLITE_DeferFKs 0x01000000 /* Defer all FK constraints */
-#define SQLITE_QueryOnly 0x02000000 /* Disable database changes */
-#define SQLITE_VdbeEQP 0x04000000 /* Debug EXPLAIN QUERY PLAN */
-#define SQLITE_Vacuum 0x08000000 /* Currently in a VACUUM */
-#define SQLITE_CellSizeCk 0x10000000 /* Check btree cell sizes on load */
+#define SQLITE_IgnoreChecks 0x00000200 /* Do not enforce check constraints */
+#define SQLITE_ReadUncommit 0x00000400 /* READ UNCOMMITTED in shared-cache */
+#define SQLITE_NoCkptOnClose 0x00000800 /* No checkpoint on close()/DETACH */
+#define SQLITE_ReverseOrder 0x00001000 /* Reverse unordered SELECTs */
+#define SQLITE_RecTriggers 0x00002000 /* Enable recursive triggers */
+#define SQLITE_ForeignKeys 0x00004000 /* Enforce foreign key constraints */
+#define SQLITE_AutoIndex 0x00008000 /* Enable automatic indexes */
+#define SQLITE_LoadExtension 0x00010000 /* Enable load_extension */
+#define SQLITE_LoadExtFunc 0x00020000 /* Enable load_extension() SQL func */
+#define SQLITE_EnableTrigger 0x00040000 /* True to enable triggers */
+#define SQLITE_DeferFKs 0x00080000 /* Defer all FK constraints */
+#define SQLITE_QueryOnly 0x00100000 /* Disable database changes */
+#define SQLITE_CellSizeCk 0x00200000 /* Check btree cell sizes on load */
+#define SQLITE_Fts3Tokenizer 0x00400000 /* Enable fts3_tokenizer(2) */
+#define SQLITE_EnableQPSG 0x00800000 /* Query Planner Stability Guarantee*/
+#define SQLITE_TriggerEQP 0x01000000 /* Show trigger EXPLAIN QUERY PLAN */
+
+/* Flags used only if debugging */
+#ifdef SQLITE_DEBUG
+#define SQLITE_SqlTrace 0x08000000 /* Debug print SQL as it executes */
+#define SQLITE_VdbeListing 0x10000000 /* Debug listings of VDBE programs */
+#define SQLITE_VdbeTrace 0x20000000 /* True to trace VDBE execution */
+#define SQLITE_VdbeAddopTrace 0x40000000 /* Trace sqlite3VdbeAddOp() calls */
+#define SQLITE_VdbeEQP 0x80000000 /* Debug EXPLAIN QUERY PLAN */
+#endif
+/*
+** Allowed values for sqlite3.mDbFlags
+*/
+#define DBFLAG_SchemaChange 0x0001 /* Uncommitted Hash table changes */
+#define DBFLAG_PreferBuiltin 0x0002 /* Preference to built-in funcs */
+#define DBFLAG_Vacuum 0x0004 /* Currently in a VACUUM */
/*
** Bits of the sqlite3.dbOptFlags field that are used by the
#define SQLITE_ColumnCache 0x0002 /* Column cache */
#define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x0008 /* Constant factoring */
-/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */
-#define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */
-#define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */
-#define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */
-#define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */
-#define SQLITE_Transitive 0x0200 /* Transitive constraints */
-#define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */
+#define SQLITE_DistinctOpt 0x0010 /* DISTINCT using indexes */
+#define SQLITE_CoverIdxScan 0x0020 /* Covering index scans */
+#define SQLITE_OrderByIdxJoin 0x0040 /* ORDER BY of joins via index */
+#define SQLITE_Transitive 0x0080 /* Transitive constraints */
+#define SQLITE_OmitNoopJoin 0x0100 /* Omit unused tables in joins */
+#define SQLITE_CountOfView 0x0200 /* The count-of-view optimization */
+#define SQLITE_CursorHints 0x0400 /* Add OP_CursorHint opcodes */
#define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */
+ /* TH3 expects the Stat34 ^^^^^^ value to be 0x0800. Don't change it */
+#define SQLITE_PushDown 0x1000 /* The push-down optimization */
+#define SQLITE_SimplifyJoin 0x2000 /* Convert LEFT JOIN to JOIN */
#define SQLITE_AllOpts 0xffff /* All optimizations */
/*
** Macros for testing whether or not optimizations are enabled or disabled.
*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
#define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0)
#define OptimizationEnabled(db, mask) (((db)->dbOptFlags&(mask))==0)
-#else
-#define OptimizationDisabled(db, mask) 0
-#define OptimizationEnabled(db, mask) 1
-#endif
/*
** Return true if it OK to factor constant expressions into the initialization
/*
** Each SQL function is defined by an instance of the following
-** structure. A pointer to this structure is stored in the sqlite.aFunc
-** hash table. When multiple functions have the same name, the hash table
-** points to a linked list of these structures.
+** structure. For global built-in functions (ex: substr(), max(), count())
+** a pointer to this structure is held in the sqlite3BuiltinFunctions object.
+** For per-connection application-defined functions, a pointer to this
+** structure is held in the db->aHash hash table.
+**
+** The u.pHash field is used by the global built-ins. The u.pDestructor
+** field is used by per-connection app-def functions.
*/
struct FuncDef {
- i16 nArg; /* Number of arguments. -1 means unlimited */
+ i8 nArg; /* Number of arguments. -1 means unlimited */
u16 funcFlags; /* Some combination of SQLITE_FUNC_* */
void *pUserData; /* User data parameter */
FuncDef *pNext; /* Next function with same name */
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */
- void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */
- void (*xFinalize)(sqlite3_context*); /* Aggregate finalizer */
- char *zName; /* SQL name of the function. */
- FuncDef *pHash; /* Next with a different name but the same hash */
- FuncDestructor *pDestructor; /* Reference counted destructor function */
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */
+ void (*xFinalize)(sqlite3_context*); /* Agg finalizer */
+ const char *zName; /* SQL name of the function. */
+ union {
+ FuncDef *pHash; /* Next with a different name but the same hash */
+ FuncDestructor *pDestructor; /* Reference counted destructor function */
+ } u;
};
/*
** This structure encapsulates a user-function destructor callback (as
** configured using create_function_v2()) and a reference counter. When
** create_function_v2() is called to create a function with a destructor,
-** a single object of this type is allocated. FuncDestructor.nRef is set to
+** a single object of this type is allocated. FuncDestructor.nRef is set to
** the number of FuncDef objects created (either 1 or 3, depending on whether
** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor
** member of each of the new FuncDef objects is set to point to the allocated
/*
** Possible values for FuncDef.flags. Note that the _LENGTH and _TYPEOF
-** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. There
+** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. And
+** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC. There
** are assert() statements in the code to verify this.
+**
+** Value constraints (enforced via assert()):
+** SQLITE_FUNC_MINMAX == NC_MinMaxAgg == SF_MinMaxAgg
+** SQLITE_FUNC_LENGTH == OPFLAG_LENGTHARG
+** SQLITE_FUNC_TYPEOF == OPFLAG_TYPEOFARG
+** SQLITE_FUNC_CONSTANT == SQLITE_DETERMINISTIC from the API
+** SQLITE_FUNC_ENCMASK depends on SQLITE_UTF* macros in the API
*/
#define SQLITE_FUNC_ENCMASK 0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */
#define SQLITE_FUNC_LIKE 0x0004 /* Candidate for the LIKE optimization */
#define SQLITE_FUNC_MINMAX 0x1000 /* True for min() and max() aggregates */
#define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a
** single query - might change over time */
+#define SQLITE_FUNC_AFFINITY 0x4000 /* Built-in affinity() function */
+#define SQLITE_FUNC_OFFSET 0x8000 /* Built-in sqlite_offset() function */
/*
** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
** used to create the initializers for the FuncDef structures.
**
** FUNCTION(zName, nArg, iArg, bNC, xFunc)
-** Used to create a scalar function definition of a function zName
+** Used to create a scalar function definition of a function zName
** implemented by C function xFunc that accepts nArg arguments. The
** value passed as iArg is cast to a (void*) and made available
-** as the user-data (sqlite3_user_data()) for the function. If
+** as the user-data (sqlite3_user_data()) for the function. If
** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set.
**
** VFUNCTION(zName, nArg, iArg, bNC, xFunc)
** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and
** adds the SQLITE_FUNC_SLOCHNG flag. Used for date & time functions
** and functions like sqlite_version() that can change, but not during
-** a single query.
+** a single query. The iArg is ignored. The user-data is always set
+** to a NULL pointer. The bNC parameter is not used.
+**
+** PURE_DATE(zName, nArg, iArg, bNC, xFunc)
+** Used for "pure" date/time functions, this macro is like DFUNCTION
+** except that it does set the SQLITE_FUNC_CONSTANT flags. iArg is
+** ignored and the user-data for these functions is set to an
+** arbitrary non-NULL pointer. The bNC parameter is not used.
**
** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal)
** Used to create an aggregate function definition implemented by
** FUNCTION().
**
** LIKEFUNC(zName, nArg, pArg, flags)
-** Used to create a scalar function definition of a function zName
-** that accepts nArg arguments and is implemented by a call to C
+** Used to create a scalar function definition of a function zName
+** that accepts nArg arguments and is implemented by a call to C
** function likeFunc. Argument pArg is cast to a (void *) and made
** available as the function user-data (sqlite3_user_data()). The
** FuncDef.flags variable is set to the value passed as the flags
*/
#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \
{nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \
{nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \
- {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
+ {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8, \
+ 0, 0, xFunc, 0, #zName, {0} }
+#define PURE_DATE(zName, nArg, iArg, bNC, xFunc) \
+ {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \
+ (void*)&sqlite3Config, 0, xFunc, 0, #zName, {0} }
#define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \
{nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
+ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \
{nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- pArg, 0, xFunc, 0, 0, #zName, 0, 0}
+ pArg, 0, xFunc, 0, #zName, }
#define LIKEFUNC(zName, nArg, arg, flags) \
{nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \
- (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0}
+ (void *)arg, 0, likeFunc, 0, #zName, {0} }
#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \
{nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0}
+ SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \
{nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \
- SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0}
+ SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
/*
** All current savepoints are stored in a linked list starting at
** of this structure.
*/
struct Column {
- char *zName; /* Name of this column */
+ char *zName; /* Name of this column, \000, then the type */
Expr *pDflt; /* Default value of this column */
- char *zDflt; /* Original text of the default value */
- char *zType; /* Data type for this column */
char *zColl; /* Collating sequence. If NULL, use the default */
u8 notNull; /* An OE_ code for handling a NOT NULL constraint */
char affinity; /* One of the SQLITE_AFF_... values */
- u8 szEst; /* Estimated size of this column. INT==1 */
+ u8 szEst; /* Estimated size of value in this column. sizeof(INT)==1 */
u8 colFlags; /* Boolean properties. See COLFLAG_ defines below */
};
*/
#define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */
#define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */
+#define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */
+#define COLFLAG_UNIQUE 0x0008 /* Column def contains "UNIQUE" or "PK" */
/*
** A "Collating Sequence" is defined by an instance of the following
**
** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and
** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve
-** the speed a little by numbering the values consecutively.
+** the speed a little by numbering the values consecutively.
**
** But rather than start with 0 or 1, we begin with 'A'. That way,
** when multiple affinity types are concatenated into a string and
/*
** The SQLITE_AFF_MASK values masks off the significant bits of an
-** affinity value.
+** affinity value.
*/
#define SQLITE_AFF_MASK 0x47
** operator is NULL. It is added to certain comparison operators to
** prove that the operands are always NOT NULL.
*/
+#define SQLITE_KEEPNULL 0x08 /* Used by vector == or <> */
#define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */
#define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */
#define SQLITE_NULLEQ 0x80 /* NULL=NULL */
/*
** An object of this type is created for each virtual table present in
-** the database schema.
+** the database schema.
**
** If the database schema is shared, then there is one instance of this
** structure for each database connection (sqlite3*) that uses the shared
** schema. This is because each database connection requires its own unique
-** instance of the sqlite3_vtab* handle used to access the virtual table
-** implementation. sqlite3_vtab* handles can not be shared between
-** database connections, even when the rest of the in-memory database
+** instance of the sqlite3_vtab* handle used to access the virtual table
+** implementation. sqlite3_vtab* handles can not be shared between
+** database connections, even when the rest of the in-memory database
** schema is shared, as the implementation often stores the database
** connection handle passed to it via the xConnect() or xCreate() method
** during initialization internally. This database connection handle may
-** then be used by the virtual table implementation to access real tables
-** within the database. So that they appear as part of the callers
-** transaction, these accesses need to be made via the same database
+** then be used by the virtual table implementation to access real tables
+** within the database. So that they appear as part of the callers
+** transaction, these accesses need to be made via the same database
** connection as that used to execute SQL operations on the virtual table.
**
** All VTable objects that correspond to a single table in a shared
** sqlite3_vtab* handle in the compiled query.
**
** When an in-memory Table object is deleted (for example when the
-** schema is being reloaded for some reason), the VTable objects are not
-** deleted and the sqlite3_vtab* handles are not xDisconnect()ed
+** schema is being reloaded for some reason), the VTable objects are not
+** deleted and the sqlite3_vtab* handles are not xDisconnect()ed
** immediately. Instead, they are moved from the Table.pVTable list to
** another linked list headed by the sqlite3.pDisconnect member of the
-** corresponding sqlite3 structure. They are then deleted/xDisconnected
+** corresponding sqlite3 structure. They are then deleted/xDisconnected
** next time a statement is prepared using said sqlite3*. This is done
** to avoid deadlock issues involving multiple sqlite3.mutex mutexes.
** Refer to comments above function sqlite3VtabUnlockList() for an
** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect
** list without holding the corresponding sqlite3.mutex mutex.
**
-** The memory for objects of this type is always allocated by
-** sqlite3DbMalloc(), using the connection handle stored in VTable.db as
+** The memory for objects of this type is always allocated by
+** sqlite3DbMalloc(), using the connection handle stored in VTable.db as
** the first argument.
*/
struct VTable {
ExprList *pCheck; /* All CHECK constraints */
/* ... also used as column name list in a VIEW */
int tnum; /* Root BTree page for this table */
+ u32 nTabRef; /* Number of pointers to this Table */
+ u32 tabFlags; /* Mask of TF_* values */
i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */
i16 nCol; /* Number of columns in this table */
- u16 nRef; /* Number of pointers to this Table */
LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */
LogEst szTabRow; /* Estimated size of each table row in bytes */
#ifdef SQLITE_ENABLE_COSTMULT
LogEst costMult; /* Cost multiplier for using this table */
#endif
- u8 tabFlags; /* Mask of TF_* values */
u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */
#ifndef SQLITE_OMIT_ALTERTABLE
int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */
/*
** Allowed values for Table.tabFlags.
**
-** TF_OOOHidden applies to virtual tables that have hidden columns that are
+** TF_OOOHidden applies to tables or view that have hidden columns that are
** followed by non-hidden columns. Example: "CREATE VIRTUAL TABLE x USING
** vtab1(a HIDDEN, b);". Since "b" is a non-hidden column but "a" is hidden,
** the TF_OOOHidden attribute would apply in this case. Such tables require
** special handling during INSERT processing.
*/
-#define TF_Readonly 0x01 /* Read-only system table */
-#define TF_Ephemeral 0x02 /* An ephemeral table */
-#define TF_HasPrimaryKey 0x04 /* Table has a primary key */
-#define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */
-#define TF_Virtual 0x10 /* Is a virtual table */
-#define TF_WithoutRowid 0x20 /* No rowid. PRIMARY KEY is the key */
-#define TF_NoVisibleRowid 0x40 /* No user-visible "rowid" column */
-#define TF_OOOHidden 0x80 /* Out-of-Order hidden columns */
-
+#define TF_Readonly 0x0001 /* Read-only system table */
+#define TF_Ephemeral 0x0002 /* An ephemeral table */
+#define TF_HasPrimaryKey 0x0004 /* Table has a primary key */
+#define TF_Autoincrement 0x0008 /* Integer primary key is autoincrement */
+#define TF_HasStat1 0x0010 /* nRowLogEst set from sqlite_stat1 */
+#define TF_WithoutRowid 0x0020 /* No rowid. PRIMARY KEY is the key */
+#define TF_NoVisibleRowid 0x0040 /* No user-visible "rowid" column */
+#define TF_OOOHidden 0x0080 /* Out-of-Order hidden columns */
+#define TF_StatsUsed 0x0100 /* Query planner decisions affected by
+ ** Index.aiRowLogEst[] values */
+#define TF_HasNotNull 0x0200 /* Contains NOT NULL constraints */
/*
** Test to see whether or not a table is a virtual table. This is
** table support is omitted from the build.
*/
#ifndef SQLITE_OMIT_VIRTUALTABLE
-# define IsVirtual(X) (((X)->tabFlags & TF_Virtual)!=0)
-# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+# define IsVirtual(X) ((X)->nModuleArg)
#else
# define IsVirtual(X) 0
-# define IsHiddenColumn(X) 0
#endif
+/*
+** Macros to determine if a column is hidden. IsOrdinaryHiddenColumn()
+** only works for non-virtual tables (ordinary tables and views) and is
+** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined. The
+** IsHiddenColumn() macro is general purpose.
+*/
+#if defined(SQLITE_ENABLE_HIDDEN_COLUMNS)
+# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+# define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+#elif !defined(SQLITE_OMIT_VIRTUALTABLE)
+# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+# define IsOrdinaryHiddenColumn(X) 0
+#else
+# define IsHiddenColumn(X) 0
+# define IsOrdinaryHiddenColumn(X) 0
+#endif
+
+
/* Does the table have a rowid */
#define HasRowid(X) (((X)->tabFlags & TF_WithoutRowid)==0)
#define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0)
** key is set to NULL. CASCADE means that a DELETE or UPDATE of the
** referenced table row is propagated into the row that holds the
** foreign key.
-**
+**
** The following symbolic values are used to record which type
** of action to take.
*/
/*
** An instance of the following structure is passed as the first
-** argument to sqlite3VdbeKeyCompare and is used to control the
+** argument to sqlite3VdbeKeyCompare and is used to control the
** comparison of the two index keys.
**
** Note that aSortOrder[] and aColl[] have nField+1 slots. There
struct KeyInfo {
u32 nRef; /* Number of references to this KeyInfo object */
u8 enc; /* Text encoding - one of the SQLITE_UTF* values */
- u16 nField; /* Number of key columns in the index */
- u16 nXField; /* Number of columns beyond the key columns */
+ u16 nKeyField; /* Number of key columns in the index */
+ u16 nAllField; /* Total columns, including key plus others */
sqlite3 *db; /* The database connection */
u8 *aSortOrder; /* Sort order for each column. */
CollSeq *aColl[1]; /* Collating sequence for each term of the key */
};
/*
-** An instance of the following structure holds information about a
-** single index record that has already been parsed out into individual
-** values.
+** This object holds a record which has been parsed out into individual
+** fields, for the purposes of doing a comparison.
**
** A record is an object that contains one or more fields of data.
** Records are used to store the content of a table row and to store
** the OP_MakeRecord opcode of the VDBE and is disassembled by the
** OP_Column opcode.
**
-** This structure holds a record that has already been disassembled
-** into its constituent fields.
-**
-** The r1 and r2 member variables are only used by the optimized comparison
-** functions vdbeRecordCompareInt() and vdbeRecordCompareString().
+** An instance of this object serves as a "key" for doing a search on
+** an index b+tree. The goal of the search is to find the entry that
+** is closed to the key described by this object. This object might hold
+** just a prefix of the key. The number of fields is given by
+** pKeyInfo->nField.
+**
+** The r1 and r2 fields are the values to return if this key is less than
+** or greater than a key in the btree, respectively. These are normally
+** -1 and +1 respectively, but might be inverted to +1 and -1 if the b-tree
+** is in DESC order.
+**
+** The key comparison functions actually return default_rc when they find
+** an equals comparison. default_rc can be -1, 0, or +1. If there are
+** multiple entries in the b-tree with the same key (when only looking
+** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to
+** cause the search to find the last match, or +1 to cause the search to
+** find the first match.
+**
+** The key comparison functions will set eqSeen to true if they ever
+** get and equal results when comparing this structure to a b-tree record.
+** When default_rc!=0, the search might end up on the record immediately
+** before the first match or immediately after the last match. The
+** eqSeen field will indicate whether or not an exact match exists in the
+** b-tree.
*/
struct UnpackedRecord {
KeyInfo *pKeyInfo; /* Collation and sort-order information */
+ Mem *aMem; /* Values */
u16 nField; /* Number of entries in apMem[] */
i8 default_rc; /* Comparison result if keys are equal */
u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */
- Mem *aMem; /* Values */
- int r1; /* Value to return if (lhs > rhs) */
- int r2; /* Value to return if (rhs < lhs) */
+ i8 r1; /* Value to return if (lhs < rhs) */
+ i8 r2; /* Value to return if (lhs > rhs) */
+ u8 eqSeen; /* True if an equality comparison has been seen */
};
** In the Table structure describing Ex1, nCol==3 because there are
** three columns in the table. In the Index structure describing
** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed.
-** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the
+** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the
** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
** The second column to be indexed (c1) has an index of 0 in
** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
** The Index.onError field determines whether or not the indexed columns
** must be unique and what to do if they are not. When Index.onError=OE_None,
** it means this is not a unique index. Otherwise it is a unique index
-** and the value of Index.onError indicate the which conflict resolution
+** and the value of Index.onError indicate the which conflict resolution
** algorithm to employ whenever an attempt is made to insert a non-unique
** element.
**
Index *pNext; /* The next index associated with the same table */
Schema *pSchema; /* Schema containing this index */
u8 *aSortOrder; /* for each column: True==DESC, False==ASC */
- char **azColl; /* Array of collation sequence names for index */
+ const char **azColl; /* Array of collation sequence names for index */
Expr *pPartIdxWhere; /* WHERE clause for partial indices */
ExprList *aColExpr; /* Column expressions */
int tnum; /* DB Page containing root of this index */
unsigned isResized:1; /* True if resizeIndexObject() has been called */
unsigned isCovering:1; /* True if this is a covering index */
unsigned noSkipScan:1; /* Do not try to use skip-scan if true */
+ unsigned hasStat1:1; /* aiRowLogEst values come from sqlite_stat1 */
+ unsigned bNoQuery:1; /* Do not use this index to optimize queries */
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
int nSample; /* Number of elements in aSample[] */
int nSampleCol; /* Size of IndexSample.anEq[] and so on */
#define XN_EXPR (-2) /* Indexed column is an expression */
/*
-** Each sample stored in the sqlite_stat3 table is represented in memory
+** Each sample stored in the sqlite_stat3 table is represented in memory
** using a structure of this type. See documentation at the top of the
** analyze.c source file for additional information.
*/
** to represent the greater-than-or-equal-to operator in the expression
** tree.
**
-** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB,
+** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB,
** or TK_STRING), then Expr.token contains the text of the SQL literal. If
-** the expression is a variable (TK_VARIABLE), then Expr.token contains the
+** the expression is a variable (TK_VARIABLE), then Expr.token contains the
** variable name. Finally, if the expression is an SQL function (TK_FUNCTION),
** then Expr.token contains the name of the function.
**
** a CASE expression or an IN expression of the form "<lhs> IN (<y>, <z>...)".
** Expr.x.pSelect is used if the expression is a sub-select or an expression of
** the form "<lhs> IN (SELECT ...)". If the EP_xIsSelect bit is set in the
-** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is
+** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is
** valid.
**
** An expression of the form ID or ID.ID refers to a column in a table.
** value is also stored in the Expr.iAgg column in the aggregate so that
** it can be accessed after all aggregates are computed.
**
-** If the expression is an unbound variable marker (a question mark
-** character '?' in the original SQL) then the Expr.iTable holds the index
+** If the expression is an unbound variable marker (a question mark
+** character '?' in the original SQL) then the Expr.iTable holds the index
** number for that variable.
**
** If the expression is a subquery then Expr.iColumn holds an integer
/* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
** space is allocated for the fields below this point. An attempt to
- ** access them will result in a segfault or malfunction.
+ ** access them will result in a segfault or malfunction.
*********************************************************************/
Expr *pLeft; /* Left subnode */
int iTable; /* TK_COLUMN: cursor number of table holding column
** TK_REGISTER: register number
** TK_TRIGGER: 1 -> new, 0 -> old
- ** EP_Unlikely: 134217728 times likelihood */
+ ** EP_Unlikely: 134217728 times likelihood
+ ** TK_SELECT: 1st register of result vector */
ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid.
- ** TK_VARIABLE: variable number (always >= 1). */
+ ** TK_VARIABLE: variable number (always >= 1).
+ ** TK_SELECT_COLUMN: column of the result vector */
i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
i16 iRightJoinTable; /* If EP_FromJoin, the right table of the join */
u8 op2; /* TK_REGISTER: original value of Expr.op
** TK_COLUMN: the value of p5 for OP_Column
** TK_AGG_FUNCTION: nesting depth */
AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */
- Table *pTab; /* Table for TK_COLUMN expressions. */
+ Table *pTab; /* Table for TK_COLUMN expressions. Can be NULL
+ ** for a column of an index on an expression */
};
/*
*/
#define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */
#define EP_Agg 0x000002 /* Contains one or more aggregate functions */
-#define EP_Resolved 0x000004 /* IDs have been resolved to COLUMNs */
-#define EP_Error 0x000008 /* Expression contains one or more errors */
+#define EP_HasFunc 0x000004 /* Contains one or more functions of any kind */
+ /* 0x000008 // available for use */
#define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */
#define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */
#define EP_DblQuoted 0x000040 /* token.z was originally in "..." */
#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
#define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */
#define EP_Alias 0x400000 /* Is an alias for a result set column */
+#define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */
/*
-** Combinations of two or more EP_* flags
+** The EP_Propagate mask is a set of properties that automatically propagate
+** upwards into parent nodes.
*/
-#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */
+#define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc)
/*
-** These macros can be used to test, set, or clear bits in the
+** These macros can be used to test, set, or clear bits in the
** Expr.flags field.
*/
#define ExprHasProperty(E,P) (((E)->flags&(P))!=0)
#endif
/*
-** Macros to determine the number of bytes required by a normal Expr
-** struct, an Expr struct with the EP_Reduced flag set in Expr.flags
+** Macros to determine the number of bytes required by a normal Expr
+** struct, an Expr struct with the EP_Reduced flag set in Expr.flags
** and an Expr struct with the EP_TokenOnly flag set.
*/
#define EXPR_FULLSIZE sizeof(Expr) /* Full size */
#define EXPR_TOKENONLYSIZE offsetof(Expr,pLeft) /* Fewer features */
/*
-** Flags passed to the sqlite3ExprDup() function. See the header comment
+** Flags passed to the sqlite3ExprDup() function. See the header comment
** above sqlite3ExprDup() for details.
*/
#define EXPRDUP_REDUCE 0x0001 /* Used reduced-size Expr nodes */
struct ExprList {
int nExpr; /* Number of expressions on the list */
struct ExprList_item { /* For each expression in the list */
- Expr *pExpr; /* The list of expressions */
+ Expr *pExpr; /* The parse tree for this expression */
char *zName; /* Token associated with this expression */
char *zSpan; /* Original text of the expression */
u8 sortOrder; /* 1 for DESC or 0 for ASC */
} x;
int iConstExprReg; /* Register in which Expr value is cached */
} u;
- } *a; /* Alloc a power of two greater or equal to nExpr */
-};
-
-/*
-** An instance of this structure is used by the parser to record both
-** the parse tree for an expression and the span of input text for an
-** expression.
-*/
-struct ExprSpan {
- Expr *pExpr; /* The expression parse tree */
- const char *zStart; /* First character of input text */
- const char *zEnd; /* One character past the end of input text */
+ } a[1]; /* One slot for each expression in the list */
};
/*
** tables in a join to 32 instead of 64. But it also reduces the size
** of the library by 738 bytes on ix86.
*/
-typedef u64 Bitmask;
+#ifdef SQLITE_BITMASK_TYPE
+ typedef SQLITE_BITMASK_TYPE Bitmask;
+#else
+ typedef u64 Bitmask;
+#endif
/*
** The number of bits in a Bitmask. "BMS" means "BitMask Size".
*/
#define MASKBIT(n) (((Bitmask)1)<<(n))
#define MASKBIT32(n) (((unsigned int)1)<<(n))
+#define ALLBITS ((Bitmask)-1)
/*
** The following structure describes the FROM clause of a SELECT statement.
int regReturn; /* Register holding return address of addrFillSub */
int regResult; /* Registers holding results of a co-routine */
struct {
- u8 jointype; /* Type of join between this able and the previous */
+ u8 jointype; /* Type of join between this table and the previous */
unsigned notIndexed :1; /* True if there is a NOT INDEXED clause */
unsigned isIndexedBy :1; /* True if there is an INDEXED BY clause */
unsigned isTabFunc :1; /* True if table-valued-function syntax */
/*
** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin()
** and the WhereInfo.wctrlFlags member.
+**
+** Value constraints (enforced via assert()):
+** WHERE_USE_LIMIT == SF_FixedLimit
*/
#define WHERE_ORDERBY_NORMAL 0x0000 /* No-op */
#define WHERE_ORDERBY_MIN 0x0001 /* ORDER BY processing for min() func */
#define WHERE_ORDERBY_MAX 0x0002 /* ORDER BY processing for max() func */
#define WHERE_ONEPASS_DESIRED 0x0004 /* Want to do one-pass UPDATE/DELETE */
-#define WHERE_DUPLICATES_OK 0x0008 /* Ok to return a row more than once */
-#define WHERE_OMIT_OPEN_CLOSE 0x0010 /* Table cursors are already open */
-#define WHERE_FORCE_TABLE 0x0020 /* Do not use an index-only search */
-#define WHERE_ONETABLE_ONLY 0x0040 /* Only code the 1st table in pTabList */
-#define WHERE_NO_AUTOINDEX 0x0080 /* Disallow automatic indexes */
-#define WHERE_GROUPBY 0x0100 /* pOrderBy is really a GROUP BY */
-#define WHERE_DISTINCTBY 0x0200 /* pOrderby is really a DISTINCT clause */
-#define WHERE_WANT_DISTINCT 0x0400 /* All output needs to be distinct */
-#define WHERE_SORTBYGROUP 0x0800 /* Support sqlite3WhereIsSorted() */
-#define WHERE_REOPEN_IDX 0x1000 /* Try to use OP_ReopenIdx */
-#define WHERE_ONEPASS_MULTIROW 0x2000 /* ONEPASS is ok with multiple rows */
+#define WHERE_ONEPASS_MULTIROW 0x0008 /* ONEPASS is ok with multiple rows */
+#define WHERE_DUPLICATES_OK 0x0010 /* Ok to return a row more than once */
+#define WHERE_OR_SUBCLAUSE 0x0020 /* Processing a sub-WHERE as part of
+ ** the OR optimization */
+#define WHERE_GROUPBY 0x0040 /* pOrderBy is really a GROUP BY */
+#define WHERE_DISTINCTBY 0x0080 /* pOrderby is really a DISTINCT clause */
+#define WHERE_WANT_DISTINCT 0x0100 /* All output needs to be distinct */
+#define WHERE_SORTBYGROUP 0x0200 /* Support sqlite3WhereIsSorted() */
+#define WHERE_SEEK_TABLE 0x0400 /* Do not defer seeks on main table */
+#define WHERE_ORDERBY_LIMIT 0x0800 /* ORDERBY+LIMIT on the inner loop */
+#define WHERE_SEEK_UNIQ_TABLE 0x1000 /* Do not defer seeks if unique */
+ /* 0x2000 not currently used */
+#define WHERE_USE_LIMIT 0x4000 /* Use the LIMIT in cost estimates */
+ /* 0x8000 not currently used */
/* Allowed return values from sqlite3WhereIsDistinct()
*/
** pEList corresponds to the result set of a SELECT and is NULL for
** other statements.
**
-** NameContexts can be nested. When resolving names, the inner-most
+** NameContexts can be nested. When resolving names, the inner-most
** context is searched first. If no match is found, the next outer
** context is checked. If there is still no match, the next context
** is checked. This process continues until either a match is found
** or all contexts are check. When a match is found, the nRef member of
-** the context containing the match is incremented.
+** the context containing the match is incremented.
**
** Each subquery gets a new NameContext. The pNext field points to the
** NameContext in the parent query. Thus the process of scanning the
/*
** Allowed values for the NameContext, ncFlags field.
**
-** Note: NC_MinMaxAgg must have the same value as SF_MinMaxAgg and
-** SQLITE_FUNC_MINMAX.
-**
+** Value constraints (all checked via assert()):
+** NC_HasAgg == SF_HasAgg
+** NC_MinMaxAgg == SF_MinMaxAgg == SQLITE_FUNC_MINMAX
+**
*/
#define NC_AllowAgg 0x0001 /* Aggregate functions are allowed here */
-#define NC_HasAgg 0x0002 /* One or more aggregate functions seen */
+#define NC_PartIdx 0x0002 /* True if resolving a partial index WHERE */
#define NC_IsCheck 0x0004 /* True if resolving names in a CHECK constraint */
#define NC_InAggFunc 0x0008 /* True if analyzing arguments to an agg func */
-#define NC_PartIdx 0x0010 /* True if resolving a partial index WHERE */
+#define NC_HasAgg 0x0010 /* One or more aggregate functions seen */
#define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */
+#define NC_VarSelect 0x0040 /* A correlated subquery has been seen */
#define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */
+#define NC_Complex 0x2000 /* True if a function or subquery seen */
/*
** An instance of the following structure contains all information
struct Select {
ExprList *pEList; /* The fields of the result */
u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
- u16 selFlags; /* Various SF_* values */
+ LogEst nSelectRow; /* Estimated number of result rows */
+ u32 selFlags; /* Various SF_* values */
int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */
#if SELECTTRACE_ENABLED
char zSelName[12]; /* Symbolic name of this SELECT use for debugging */
#endif
int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */
- u64 nSelectRow; /* Estimated number of result rows */
SrcList *pSrc; /* The FROM clause */
Expr *pWhere; /* The WHERE clause */
ExprList *pGroupBy; /* The GROUP BY clause */
Select *pPrior; /* Prior select in a compound select statement */
Select *pNext; /* Next select to the left in a compound */
Expr *pLimit; /* LIMIT expression. NULL means not used. */
- Expr *pOffset; /* OFFSET expression. NULL means not used. */
With *pWith; /* WITH clause attached to this select. Or NULL. */
};
/*
** Allowed values for Select.selFlags. The "SF" prefix stands for
** "Select Flag".
-*/
-#define SF_Distinct 0x0001 /* Output should be DISTINCT */
-#define SF_All 0x0002 /* Includes the ALL keyword */
-#define SF_Resolved 0x0004 /* Identifiers have been resolved */
-#define SF_Aggregate 0x0008 /* Contains aggregate functions */
-#define SF_UsesEphemeral 0x0010 /* Uses the OpenEphemeral opcode */
-#define SF_Expanded 0x0020 /* sqlite3SelectExpand() called on this */
-#define SF_HasTypeInfo 0x0040 /* FROM subqueries have Table metadata */
-#define SF_Compound 0x0080 /* Part of a compound query */
-#define SF_Values 0x0100 /* Synthesized from VALUES clause */
-#define SF_MultiValue 0x0200 /* Single VALUES term with multiple rows */
-#define SF_NestedFrom 0x0400 /* Part of a parenthesized FROM clause */
-#define SF_MaybeConvert 0x0800 /* Need convertCompoundSelectToSubquery() */
-#define SF_MinMaxAgg 0x1000 /* Aggregate containing min() or max() */
-#define SF_Recursive 0x2000 /* The recursive part of a recursive CTE */
-#define SF_Converted 0x4000 /* By convertCompoundSelectToSubquery() */
+**
+** Value constraints (all checked via assert())
+** SF_HasAgg == NC_HasAgg
+** SF_MinMaxAgg == NC_MinMaxAgg == SQLITE_FUNC_MINMAX
+** SF_FixedLimit == WHERE_USE_LIMIT
+*/
+#define SF_Distinct 0x00001 /* Output should be DISTINCT */
+#define SF_All 0x00002 /* Includes the ALL keyword */
+#define SF_Resolved 0x00004 /* Identifiers have been resolved */
+#define SF_Aggregate 0x00008 /* Contains agg functions or a GROUP BY */
+#define SF_HasAgg 0x00010 /* Contains aggregate functions */
+#define SF_UsesEphemeral 0x00020 /* Uses the OpenEphemeral opcode */
+#define SF_Expanded 0x00040 /* sqlite3SelectExpand() called on this */
+#define SF_HasTypeInfo 0x00080 /* FROM subqueries have Table metadata */
+#define SF_Compound 0x00100 /* Part of a compound query */
+#define SF_Values 0x00200 /* Synthesized from VALUES clause */
+#define SF_MultiValue 0x00400 /* Single VALUES term with multiple rows */
+#define SF_NestedFrom 0x00800 /* Part of a parenthesized FROM clause */
+#define SF_MinMaxAgg 0x01000 /* Aggregate containing min() or max() */
+#define SF_Recursive 0x02000 /* The recursive part of a recursive CTE */
+#define SF_FixedLimit 0x04000 /* nSelectRow set by a constant LIMIT */
+#define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */
+#define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */
+#define SF_IncludeHidden 0x20000 /* Include hidden columns in output */
+#define SF_ComplexResult 0x40000 /* Result set contains subquery or function */
/*
** by one of the following macros. The "SRT" prefix means "SELECT Result
** Type".
**
-** SRT_Union Store results as a key in a temporary index
+** SRT_Union Store results as a key in a temporary index
** identified by pDest->iSDParm.
**
** SRT_Except Remove results from the temporary index pDest->iSDParm.
** of the query. This destination implies "LIMIT 1".
**
** SRT_Set The result must be a single column. Store each
-** row of result as the key in table pDest->iSDParm.
+** row of result as the key in table pDest->iSDParm.
** Apply the affinity pDest->affSdst before storing
** results. Used to implement "IN (SELECT ...)".
**
*/
struct SelectDest {
u8 eDest; /* How to dispose of the results. On of SRT_* above. */
- char affSdst; /* Affinity used when eDest==SRT_Set */
int iSDParm; /* A parameter used by the eDest disposal method */
int iSdst; /* Base register where results are written */
int nSdst; /* Number of registers allocated */
+ char *zAffSdst; /* Affinity used when eDest==SRT_Set */
ExprList *pOrderBy; /* Key columns for SRT_Queue and SRT_DistQueue */
};
/*
-** During code generation of statements that do inserts into AUTOINCREMENT
+** During code generation of statements that do inserts into AUTOINCREMENT
** tables, the following information is attached to the Table.u.autoInc.p
** pointer of each autoincrement table to record some side information that
** the code generator needs. We have to keep per-table autoincrement
-** information in case inserts are down within triggers. Triggers do not
+** information in case inserts are done within triggers. Triggers do not
** normally coordinate their activities, but we do need to coordinate the
** loading and saving of autoincrement information.
*/
#endif
/*
-** At least one instance of the following structure is created for each
+** At least one instance of the following structure is created for each
** trigger that may be fired while parsing an INSERT, UPDATE or DELETE
** statement. All such objects are stored in the linked list headed at
** Parse.pTriggerPrg and deleted once statement compilation has been
** values for both pTrigger and orconf.
**
** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
-** accessed (or set to 0 for triggers fired as a result of INSERT
+** accessed (or set to 0 for triggers fired as a result of INSERT
** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
** a mask of new.* columns used by the program.
*/
** is constant but the second part is reset at the beginning and end of
** each recursion.
**
-** The nTableLock and aTableLock variables are only used if the shared-cache
+** The nTableLock and aTableLock variables are only used if the shared-cache
** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
** used to store the set of table-locks required by the statement being
** compiled. Function sqlite3TableLock() is used to add entries to the
u8 mayAbort; /* True if statement may throw an ABORT exception */
u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */
u8 okConstFactor; /* OK to factor out constants */
- int aTempReg[8]; /* Holding area for temporary registers */
+ u8 disableLookaside; /* Number of times lookaside has been disabled */
+ u8 nColCache; /* Number of entries in aColCache[] */
int nRangeReg; /* Size of the temporary register block */
int iRangeReg; /* First register in temporary register block */
int nErr; /* Number of errors seen */
int nTab; /* Number of previously allocated VDBE cursors */
int nMem; /* Number of memory cells used so far */
- int nSet; /* Number of sets used so far */
- int nOnce; /* Number of OP_Once instructions so far */
int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */
- int iFixedOp; /* Never back out opcodes iFixedOp-1 or earlier */
- int ckBase; /* Base register of data during check constraints */
- int iSelfTab; /* Table of an index whose exprs are being coded */
+ int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */
+ int iSelfTab; /* Table associated with an index on expr, or negative
+ ** of the base register during check-constraint eval */
int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
int iCacheCnt; /* Counter used to generate aColCache[].lru values */
int nLabel; /* Number of labels used */
int *aLabel; /* Space to hold the labels */
- struct yColCache {
- int iTable; /* Table cursor number */
- i16 iColumn; /* Table column number */
- u8 tempReg; /* iReg is a temp register that needs to be freed */
- int iLevel; /* Nesting level */
- int iReg; /* Reg with value of this column. 0 means none. */
- int lru; /* Least recently used entry has the smallest value */
- } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */
ExprList *pConstExpr;/* Constant expressions */
Token constraintName;/* Name of the constraint currently being parsed */
yDbMask writeMask; /* Start a write transaction on these databases */
yDbMask cookieMask; /* Bitmask of schema verified databases */
- int cookieValue[SQLITE_MAX_ATTACHED+2]; /* Values of cookies to verify */
int regRowid; /* Register holding rowid of CREATE TABLE entry */
int regRoot; /* Register holding root page number for new objects */
int nMaxArg; /* Max args passed to user function by sub-program */
#if SELECTTRACE_ENABLED
int nSelect; /* Number of SELECT statements seen */
- int nSelectIndent; /* How far to indent SELECTTRACE() output */
#endif
#ifndef SQLITE_OMIT_SHARED_CACHE
int nTableLock; /* Number of locks in aTableLock */
TableLock *aTableLock; /* Required table locks for shared-cache mode */
#endif
AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */
-
- /* Information used while coding trigger programs. */
Parse *pToplevel; /* Parse structure for main program (or NULL) */
Table *pTriggerTab; /* Table triggers are being coded for */
- int addrCrTab; /* Address of OP_CreateTable opcode on CREATE TABLE */
+ int addrCrTab; /* Address of OP_CreateBtree opcode on CREATE TABLE */
u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */
u32 oldmask; /* Mask of old.* columns referenced */
u32 newmask; /* Mask of new.* columns referenced */
u8 eOrconf; /* Default ON CONFLICT policy for trigger steps */
u8 disableTriggers; /* True to disable triggers */
+ /**************************************************************************
+ ** Fields above must be initialized to zero. The fields that follow,
+ ** down to the beginning of the recursive section, do not need to be
+ ** initialized as they will be set before being used. The boundary is
+ ** determined by offsetof(Parse,aColCache).
+ **************************************************************************/
+
+ struct yColCache {
+ int iTable; /* Table cursor number */
+ i16 iColumn; /* Table column number */
+ u8 tempReg; /* iReg is a temp register that needs to be freed */
+ int iLevel; /* Nesting level */
+ int iReg; /* Reg with value of this column. 0 means none. */
+ int lru; /* Least recently used entry has the smallest value */
+ } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */
+ int aTempReg[8]; /* Holding area for temporary registers */
+ Token sNameToken; /* Token with unqualified schema object name */
+
/************************************************************************
** Above is constant between recursions. Below is reset before and after
** each recursion. The boundary between these two regions is determined
- ** using offsetof(Parse,nVar) so the nVar field must be the first field
- ** in the recursive region.
+ ** using offsetof(Parse,sLastToken) so the sLastToken field must be the
+ ** first field in the recursive region.
************************************************************************/
- int nVar; /* Number of '?' variables seen in the SQL so far */
- int nzVar; /* Number of available slots in azVar[] */
+ Token sLastToken; /* The last token parsed */
+ ynVar nVar; /* Number of '?' variables seen in the SQL so far */
u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */
- u8 bFreeWith; /* True if pWith should be freed with parser */
u8 explain; /* True if the EXPLAIN flag is found on the query */
#ifndef SQLITE_OMIT_VIRTUALTABLE
u8 declareVtab; /* True if inside sqlite3_declare_vtab() */
int nVtabLock; /* Number of virtual tables to lock */
#endif
- int nAlias; /* Number of aliased result set columns */
int nHeight; /* Expression tree height of current sub-select */
#ifndef SQLITE_OMIT_EXPLAIN
int iSelectId; /* ID of current select for EXPLAIN output */
int iNextSelectId; /* Next available select ID for EXPLAIN output */
#endif
- char **azVar; /* Pointers to names of parameters */
+ VList *pVList; /* Mapping between variable names and numbers */
Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */
const char *zTail; /* All SQL text past the last semicolon parsed */
Table *pNewTable; /* A table being constructed by CREATE TABLE */
Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */
const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
- Token sNameToken; /* Token with unqualified schema object name */
- Token sLastToken; /* The last token parsed */
#ifndef SQLITE_OMIT_VIRTUALTABLE
Token sArg; /* Complete text of a module argument */
Table **apVtabLock; /* Pointer to virtual tables needing locking */
Table *pZombieTab; /* List of Table objects to delete after code gen */
TriggerPrg *pTriggerPrg; /* Linked list of coded triggers */
With *pWith; /* Current WITH clause, or NULL */
+ With *pWithToFree; /* Free this WITH object at the end of the parse */
};
+/*
+** Sizes and pointers of various parts of the Parse object.
+*/
+#define PARSE_HDR_SZ offsetof(Parse,aColCache) /* Recursive part w/o aColCache*/
+#define PARSE_RECURSE_SZ offsetof(Parse,sLastToken) /* Recursive part */
+#define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */
+#define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ) /* Pointer to tail */
+
/*
** Return true if currently inside an sqlite3_declare_vtab() call.
*/
/*
** Bitfield flags for P5 value in various opcodes.
-*/
-#define OPFLAG_NCHANGE 0x01 /* Set to update db->nChange */
+**
+** Value constraints (enforced via assert()):
+** OPFLAG_LENGTHARG == SQLITE_FUNC_LENGTH
+** OPFLAG_TYPEOFARG == SQLITE_FUNC_TYPEOF
+** OPFLAG_BULKCSR == BTREE_BULKLOAD
+** OPFLAG_SEEKEQ == BTREE_SEEK_EQ
+** OPFLAG_FORDELETE == BTREE_FORDELETE
+** OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION
+** OPFLAG_AUXDELETE == BTREE_AUXDELETE
+*/
+#define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */
+ /* Also used in P2 (not P5) of OP_Delete */
#define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */
-#define OPFLAG_LASTROWID 0x02 /* Set to update db->lastRowid */
+#define OPFLAG_LASTROWID 0x20 /* Set to update db->lastRowid */
#define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */
#define OPFLAG_APPEND 0x08 /* This is likely to be an append */
#define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */
+#define OPFLAG_ISNOOP 0x40 /* OP_Delete does pre-update-hook only */
#define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */
#define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */
#define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */
#define OPFLAG_SEEKEQ 0x02 /* OP_Open** cursor uses EQ seek only */
-#define OPFLAG_P2ISREG 0x04 /* P2 to OP_Open** is a register number */
+#define OPFLAG_FORDELETE 0x08 /* OP_Open should use BTREE_FORDELETE */
+#define OPFLAG_P2ISREG 0x10 /* P2 to OP_Open** is a register number */
#define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */
+#define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete/Insert: save cursor pos */
+#define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */
+#define OPFLAG_NOCHNG_MAGIC 0x6d /* OP_MakeRecord: serialtype 10 is ok */
/*
* Each trigger present in the database schema is stored as an instance of
- * struct Trigger.
+ * struct Trigger.
*
* Pointers to instances of struct Trigger are stored in two ways.
- * 1. In the "trigHash" hash table (part of the sqlite3* that represents the
+ * 1. In the "trigHash" hash table (part of the sqlite3* that represents the
* database). This allows Trigger structures to be retrieved by name.
* 2. All triggers associated with a single table form a linked list, using the
* pNext member of struct Trigger. A pointer to the first element of the
/*
** A trigger is either a BEFORE or an AFTER trigger. The following constants
-** determine which.
+** determine which.
**
** If there are multiple triggers, you might of some BEFORE and some AFTER.
** In that cases, the constants below can be ORed together.
/*
* An instance of struct TriggerStep is used to store a single SQL statement
- * that is a part of a trigger-program.
+ * that is a part of a trigger-program.
*
* Instances of struct TriggerStep are stored in a singly linked list (linked
- * using the "pNext" member) referenced by the "step_list" member of the
+ * using the "pNext" member) referenced by the "step_list" member of the
* associated struct Trigger instance. The first element of the linked list is
* the first step of the trigger-program.
- *
+ *
* The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or
- * "SELECT" statement. The meanings of the other members is determined by the
+ * "SELECT" statement. The meanings of the other members is determined by the
* value of "op" as follows:
*
* (op == TK_INSERT)
* zTarget -> Dequoted name of the table to insert into.
* pExprList -> If this is an INSERT INTO ... VALUES ... statement, then
* this stores values to be inserted. Otherwise NULL.
- * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ...
+ * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ...
* statement, then this stores the column-names to be
* inserted into.
*
* zTarget -> Dequoted name of the table to delete from.
* pWhere -> The WHERE clause of the DELETE statement if one is specified.
* Otherwise NULL.
- *
+ *
* (op == TK_UPDATE)
* zTarget -> Dequoted name of the table to update.
* pWhere -> The WHERE clause of the UPDATE statement if one is specified.
* pExprList -> A list of the columns to update and the expressions to update
* them to. See sqlite3Update() documentation of "pChanges"
* argument.
- *
+ *
*/
struct TriggerStep {
u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */
ExprList *pExprList; /* SET clause for UPDATE. */
IdList *pIdList; /* Column names for INSERT */
+ char *zSpan; /* Original SQL text of this command */
TriggerStep *pNext; /* Next in the link-list */
TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */
};
/*
** The following structure contains information used by the sqliteFix...
** routines as they walk the parse tree to make database references
-** explicit.
+** explicit.
*/
typedef struct DbFixer DbFixer;
struct DbFixer {
*/
struct StrAccum {
sqlite3 *db; /* Optional database for lookaside. Can be NULL */
- char *zBase; /* A base allocation. Not from malloc. */
char *zText; /* The string collected so far */
- int nChar; /* Length of the string so far */
- int nAlloc; /* Amount of space allocated in zText */
- int mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */
+ u32 nAlloc; /* Amount of space allocated in zText */
+ u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */
+ u32 nChar; /* Length of the string so far */
u8 accError; /* STRACCUM_NOMEM or STRACCUM_TOOBIG */
+ u8 printfFlags; /* SQLITE_PRINTF flags below */
};
#define STRACCUM_NOMEM 1
#define STRACCUM_TOOBIG 2
+#define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */
+#define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */
+#define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */
+
+#define isMalloced(X) (((X)->printfFlags & SQLITE_PRINTF_MALLOCED)!=0)
+
/*
** A pointer to this structure is used to communicate information
int bFullMutex; /* True to enable full mutexing */
int bOpenUri; /* True to interpret filenames as URIs */
int bUseCis; /* Use covering indices for full-scans */
+ int bSmallMalloc; /* Avoid large memory allocations if true */
int mxStrlen; /* Maximum string length */
int neverCorrupt; /* Database is always well-formed */
int szLookaside; /* Default lookaside buffer size */
int nLookaside; /* Default lookaside buffer count */
+ int nStmtSpill; /* Stmt-journal spill-to-disk threshold */
sqlite3_mem_methods m; /* Low-level memory allocation interface */
sqlite3_mutex_methods mutex; /* Low-level mutex interface */
sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */
int mnReq, mxReq; /* Min and max heap requests sizes */
sqlite3_int64 szMmap; /* mmap() space per open file */
sqlite3_int64 mxMmap; /* Maximum value for szMmap */
- void *pScratch; /* Scratch memory */
- int szScratch; /* Size of each scratch buffer */
- int nScratch; /* Number of scratch buffers */
void *pPage; /* Page cache memory */
int szPage; /* Size of each page in pPage[] */
int nPage; /* Number of pages in pPage[] */
void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */
void *pVdbeBranchArg; /* 1st argument */
#endif
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */
#endif
int bLocaltimeFault; /* True to fail localtime() calls */
+ int iOnceResetThreshold; /* When to reset OP_Once counters */
};
/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
+ Parse *pParse; /* Parser context. */
int (*xExprCallback)(Walker*, Expr*); /* Callback for expressions */
int (*xSelectCallback)(Walker*,Select*); /* Callback for SELECTs */
void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */
- Parse *pParse; /* Parser context. */
int walkerDepth; /* Number of subqueries */
u8 eCode; /* A small processing code */
union { /* Extra data for callback */
- NameContext *pNC; /* Naming context */
- int n; /* A counter */
- int iCur; /* A cursor number */
- SrcList *pSrcList; /* FROM clause */
- struct SrcCount *pSrcCount; /* Counting column references */
+ NameContext *pNC; /* Naming context */
+ int n; /* A counter */
+ int iCur; /* A cursor number */
+ SrcList *pSrcList; /* FROM clause */
+ struct SrcCount *pSrcCount; /* Counting column references */
+ struct CCurHint *pCCurHint; /* Used by codeCursorHint() */
+ int *aiCol; /* array of column indexes */
+ struct IdxCover *pIdxCover; /* Check for index coverage */
+ struct IdxExprTrans *pIdxTrans; /* Convert idxed expr to column */
+ ExprList *pGroupBy; /* GROUP BY clause */
+ Select *pSelect; /* HAVING to WHERE clause ctx */
} u;
};
SQLITE_PRIVATE int sqlite3WalkSelect(Walker*, Select*);
SQLITE_PRIVATE int sqlite3WalkSelectExpr(Walker*, Select*);
SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker*, Select*);
+SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker*, Expr*);
+SQLITE_PRIVATE int sqlite3SelectWalkNoop(Walker*, Select*);
+SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker*, Select*);
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE void sqlite3SelectWalkAssert2(Walker*, Select*);
+#endif
/*
** Return code from the parse-tree walking primitives and their
** using sqlite3_log(). The routines also provide a convenient place
** to set a debugger breakpoint.
*/
+SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType);
SQLITE_PRIVATE int sqlite3CorruptError(int);
SQLITE_PRIVATE int sqlite3MisuseError(int);
SQLITE_PRIVATE int sqlite3CantopenError(int);
#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3NomemError(int);
+SQLITE_PRIVATE int sqlite3IoerrnomemError(int);
+SQLITE_PRIVATE int sqlite3CorruptPgnoError(int,Pgno);
+# define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__)
+# define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__)
+# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptPgnoError(__LINE__,(P))
+#else
+# define SQLITE_NOMEM_BKPT SQLITE_NOMEM
+# define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM
+# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptError(__LINE__)
+#endif
+/*
+** FTS3 and FTS4 both require virtual table support
+*/
+#if defined(SQLITE_OMIT_VIRTUALTABLE)
+# undef SQLITE_ENABLE_FTS3
+# undef SQLITE_ENABLE_FTS4
+#endif
/*
** FTS4 is really an extension for FTS3. It is enabled using the
# define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
# define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
# define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)])
+# define sqlite3Isquote(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x80)
#else
# define sqlite3Toupper(x) toupper((unsigned char)(x))
# define sqlite3Isspace(x) isspace((unsigned char)(x))
# define sqlite3Isdigit(x) isdigit((unsigned char)(x))
# define sqlite3Isxdigit(x) isxdigit((unsigned char)(x))
# define sqlite3Tolower(x) tolower((unsigned char)(x))
+# define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`')
#endif
#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
SQLITE_PRIVATE int sqlite3IsIdChar(u8);
/*
** Internal function prototypes
*/
-#define sqlite3StrICmp sqlite3_stricmp
+SQLITE_PRIVATE int sqlite3StrICmp(const char*,const char*);
SQLITE_PRIVATE int sqlite3Strlen30(const char*);
+SQLITE_PRIVATE char *sqlite3ColumnType(Column*,char*);
#define sqlite3StrNICmp sqlite3_strnicmp
SQLITE_PRIVATE int sqlite3MallocInit(void);
SQLITE_PRIVATE void *sqlite3MallocZero(u64);
SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3*, u64);
SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3*, u64);
+SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3*, u64);
SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3*,const char*);
SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64);
+SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3*,const char*,const char*);
SQLITE_PRIVATE void *sqlite3Realloc(void*, u64);
SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64);
SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64);
SQLITE_PRIVATE void sqlite3DbFree(sqlite3*, void*);
+SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3*, void*);
SQLITE_PRIVATE int sqlite3MallocSize(void*);
SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, void*);
-SQLITE_PRIVATE void *sqlite3ScratchMalloc(int);
-SQLITE_PRIVATE void sqlite3ScratchFree(void*);
SQLITE_PRIVATE void *sqlite3PageMalloc(int);
SQLITE_PRIVATE void sqlite3PageFree(void*);
SQLITE_PRIVATE void sqlite3MemSetDefault(void);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
#endif
SQLITE_PRIVATE int sqlite3HeapNearlyFull(void);
#ifdef SQLITE_USE_ALLOCA
# define sqlite3StackAllocRaw(D,N) alloca(N)
# define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N)
-# define sqlite3StackFree(D,P)
+# define sqlite3StackFree(D,P)
#else
# define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N)
# define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N)
# define sqlite3StackFree(D,P) sqlite3DbFree(D,P)
#endif
-#ifdef SQLITE_ENABLE_MEMSYS3
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
-#endif
+/* Do not allow both MEMSYS5 and MEMSYS3 to be defined together. If they
+** are, disable MEMSYS3
+*/
#ifdef SQLITE_ENABLE_MEMSYS5
SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
+#undef SQLITE_ENABLE_MEMSYS3
+#endif
+#ifdef SQLITE_ENABLE_MEMSYS3
+SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
#endif
SQLITE_PRIVATE sqlite3_int64 sqlite3StatusValue(int);
SQLITE_PRIVATE void sqlite3StatusUp(int, int);
SQLITE_PRIVATE void sqlite3StatusDown(int, int);
-SQLITE_PRIVATE void sqlite3StatusSet(int, int);
+SQLITE_PRIVATE void sqlite3StatusHighwater(int, int);
+SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3*,int*);
/* Access to mutexes used by sqlite3_status() */
SQLITE_PRIVATE sqlite3_mutex *sqlite3Pcache1Mutex(void);
SQLITE_PRIVATE sqlite3_mutex *sqlite3MallocMutex(void);
+#if defined(SQLITE_ENABLE_MULTITHREADED_CHECKS) && !defined(SQLITE_MUTEX_OMIT)
+SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex*);
+#else
+# define sqlite3MutexWarnOnContention(x)
+#endif
+
#ifndef SQLITE_OMIT_FLOATING_POINT
SQLITE_PRIVATE int sqlite3IsNaN(double);
#else
sqlite3_value **apArg; /* The argument values */
};
-#define SQLITE_PRINTF_INTERNAL 0x01
-#define SQLITE_PRINTF_SQLFUNC 0x02
-SQLITE_PRIVATE void sqlite3VXPrintf(StrAccum*, u32, const char*, va_list);
-SQLITE_PRIVATE void sqlite3XPrintf(StrAccum*, u32, const char*, ...);
+SQLITE_PRIVATE void sqlite3VXPrintf(StrAccum*, const char*, va_list);
+SQLITE_PRIVATE void sqlite3XPrintf(StrAccum*, const char*, ...);
SQLITE_PRIVATE char *sqlite3MPrintf(sqlite3*,const char*, ...);
SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
#if defined(SQLITE_DEBUG)
SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
+SQLITE_PRIVATE void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*);
SQLITE_PRIVATE void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
+SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView*, const With*, u8);
#endif
SQLITE_PRIVATE void sqlite3SetString(char **, sqlite3*, const char*);
SQLITE_PRIVATE void sqlite3ErrorMsg(Parse*, const char*, ...);
-SQLITE_PRIVATE int sqlite3Dequote(char*);
+SQLITE_PRIVATE void sqlite3Dequote(char*);
+SQLITE_PRIVATE void sqlite3TokenInit(Token*,char*);
SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char*, int);
SQLITE_PRIVATE int sqlite3RunParser(Parse*, const char*, char **);
SQLITE_PRIVATE void sqlite3FinishCoding(Parse*);
SQLITE_PRIVATE int sqlite3GetTempRange(Parse*,int);
SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse*,int,int);
SQLITE_PRIVATE void sqlite3ClearTempRegCache(Parse*);
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3NoTempsInRange(Parse*,int,int);
+#endif
SQLITE_PRIVATE Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
SQLITE_PRIVATE Expr *sqlite3Expr(sqlite3*,int,const char*);
SQLITE_PRIVATE void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
-SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
+SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*);
+SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*);
SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*);
+SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32);
SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3*, Expr*);
SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
+SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*);
SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int);
SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
-SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
+SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,const char*,const char*);
SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3*, ExprList*);
SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList*);
SQLITE_PRIVATE int sqlite3Init(sqlite3*, char**);
SQLITE_PRIVATE int sqlite3InitCallback(void*, int, char**, char**);
SQLITE_PRIVATE void sqlite3Pragma(Parse*,Token*,Token*,Token*,int);
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+SQLITE_PRIVATE Module *sqlite3PragmaVtabRegister(sqlite3*,const char *zName);
+#endif
SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3*);
SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3*,int);
SQLITE_PRIVATE void sqlite3CollapseDatabaseArray(sqlite3*);
-SQLITE_PRIVATE void sqlite3BeginParse(Parse*,int);
SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3*);
SQLITE_PRIVATE void sqlite3DeleteColumnNames(sqlite3*,Table*);
SQLITE_PRIVATE int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**);
+SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation(Parse*,Table*,Select*);
SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse*,Select*);
SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *, int);
SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table*);
SQLITE_PRIVATE i16 sqlite3ColumnOfIndex(Index*, i16);
SQLITE_PRIVATE void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
-SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*);
+#if SQLITE_ENABLE_HIDDEN_COLUMNS
+SQLITE_PRIVATE void sqlite3ColumnPropertiesFromName(Table*, Column*);
+#else
+# define sqlite3ColumnPropertiesFromName(T,C) /* no-op */
+#endif
+SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*,Token*);
SQLITE_PRIVATE void sqlite3AddNotNull(Parse*, int);
SQLITE_PRIVATE void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*);
-SQLITE_PRIVATE void sqlite3AddColumnType(Parse*,Token*);
-SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*);
+SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,Expr*,const char*,const char*);
SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*);
SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*);
SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
sqlite3_vfs**,char**,char **);
SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);
-#ifdef SQLITE_OMIT_BUILTIN_TEST
+#ifdef SQLITE_UNTESTABLE
# define sqlite3FaultSim(X) SQLITE_OK
#else
SQLITE_PRIVATE int sqlite3FaultSim(int);
SQLITE_PRIVATE void sqlite3BitvecClear(Bitvec*, u32, void*);
SQLITE_PRIVATE void sqlite3BitvecDestroy(Bitvec*);
SQLITE_PRIVATE u32 sqlite3BitvecSize(Bitvec*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE int sqlite3BitvecBuiltinTest(int,int*);
#endif
SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3*, IdList*);
SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3*, SrcList*);
SQLITE_PRIVATE Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**);
-SQLITE_PRIVATE Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
- Expr*, int, int);
+SQLITE_PRIVATE void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
+ Expr*, int, int, u8);
SQLITE_PRIVATE void sqlite3DropIndex(Parse*, SrcList*, int);
SQLITE_PRIVATE int sqlite3Select(Parse*, Select*, SelectDest*);
SQLITE_PRIVATE Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
- Expr*,ExprList*,u16,Expr*,Expr*);
+ Expr*,ExprList*,u32,Expr*);
SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3*, Select*);
SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse*, SrcList*);
SQLITE_PRIVATE int sqlite3IsReadOnly(Parse*, Table*, int);
SQLITE_PRIVATE void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int);
#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY)
-SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*);
+SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,char*);
#endif
-SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*);
-SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
+SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*, ExprList*, Expr*);
+SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*,Expr*,int,ExprList*,Expr*);
SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int);
SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*);
-SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo*);
+SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*);
+SQLITE_PRIVATE int sqlite3WhereOrderedInnerLoop(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*);
SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*);
#define ONEPASS_MULTI 2 /* ONEPASS is valid for multiple rows */
SQLITE_PRIVATE void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int);
SQLITE_PRIVATE int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8);
+SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg(Parse*, Table*, int, int, int);
SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int);
SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse*, int, int, int);
SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse*, int, int, int);
SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse*);
SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse*, int, int);
SQLITE_PRIVATE void sqlite3ExprCode(Parse*, Expr*, int);
+SQLITE_PRIVATE void sqlite3ExprCodeCopy(Parse*, Expr*, int);
SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprCodeAtInit(Parse*, Expr*, int, u8);
+SQLITE_PRIVATE int sqlite3ExprCodeAtInit(Parse*, Expr*, int);
SQLITE_PRIVATE int sqlite3ExprCodeTemp(Parse*, Expr*, int*);
SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse*, Expr*, int);
SQLITE_PRIVATE void sqlite3ExprCodeAndCache(Parse*, Expr*, int);
#define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */
#define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */
#define SQLITE_ECEL_REF 0x04 /* Use ExprList.u.x.iOrderByCol */
+#define SQLITE_ECEL_OMITREF 0x08 /* Omit if ExprList.u.x.iOrderByCol */
SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse*, Expr*, int, int);
SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int);
SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3*,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTableItem(Parse*,int isView,struct SrcList_item *);
+#define LOCATE_VIEW 0x01
+#define LOCATE_NOERR 0x02
+SQLITE_PRIVATE Table *sqlite3LocateTable(Parse*,u32 flags,const char*, const char*);
+SQLITE_PRIVATE Table *sqlite3LocateTableItem(Parse*,u32 flags,struct SrcList_item *);
SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3Vacuum(Parse*);
-SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*);
+SQLITE_PRIVATE void sqlite3Vacuum(Parse*,Token*);
+SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*, int);
SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3*, Token*);
-SQLITE_PRIVATE int sqlite3ExprCompare(Expr*, Expr*, int);
+SQLITE_PRIVATE int sqlite3ExprCompare(Parse*,Expr*, Expr*, int);
+SQLITE_PRIVATE int sqlite3ExprCompareSkip(Expr*, Expr*, int);
SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int);
-SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr*, Expr*, int);
+SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Parse*,Expr*, Expr*, int);
+SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr*,int);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
+SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx);
SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr*, SrcList*);
SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE void sqlite3PrngSaveState(void);
SQLITE_PRIVATE void sqlite3PrngRestoreState(void);
#endif
SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse*, int);
SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
SQLITE_PRIVATE void sqlite3BeginTransaction(Parse*, int);
-SQLITE_PRIVATE void sqlite3CommitTransaction(Parse*);
-SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse*);
+SQLITE_PRIVATE void sqlite3EndTransaction(Parse*,int);
SQLITE_PRIVATE void sqlite3Savepoint(Parse*, int, Token*);
SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *);
SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3*);
+SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr*);
+SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr*);
SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr*);
SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr*);
SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*, u8);
+SQLITE_PRIVATE int sqlite3ExprIsConstantOrGroupBy(Parse*, Expr*, ExprList*);
SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr*,int);
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr*);
+#endif
SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr*, int*);
SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr*);
SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int);
SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
- u8,u8,int,int*);
+ u8,u8,int,int*,int*);
+#ifdef SQLITE_ENABLE_NULL_TRIM
+SQLITE_PRIVATE void sqlite3SetMakeRecordP5(Vdbe*,Table*);
+#else
+# define sqlite3SetMakeRecordP5(A,B)
+#endif
SQLITE_PRIVATE void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int);
-SQLITE_PRIVATE int sqlite3OpenTableAndIndices(Parse*, Table*, int, int, u8*, int*, int*);
+SQLITE_PRIVATE int sqlite3OpenTableAndIndices(Parse*, Table*, int, u8, int, u8*, int*, int*);
SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse*, int, int);
SQLITE_PRIVATE void sqlite3MultiWrite(Parse*);
SQLITE_PRIVATE void sqlite3MayAbort(Parse*);
#else
# define sqlite3SelectSetName(A,B)
#endif
-SQLITE_PRIVATE void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*);
-SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,u8);
-SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3*);
+SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(FuncDef*,int);
+SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8);
+SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void);
SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void);
-SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void);
+SQLITE_PRIVATE void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckOk(sqlite3*);
SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3*);
SQLITE_PRIVATE void sqlite3ChangeCookie(Parse*, int);
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
-SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, int);
+SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, ExprList*,Expr*,int);
#endif
#ifndef SQLITE_OMIT_TRIGGER
SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int);
void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*);
SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*);
+SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*,
+ const char*,const char*);
SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*,
- Select*,u8);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*);
+ Select*,u8,const char*,const char*);
+SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8,
+ const char*,const char*);
+SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*,
+ const char*,const char*);
SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3*, Trigger*);
SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*);
SQLITE_PRIVATE u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int);
SQLITE_PRIVATE int sqlite3AtoF(const char *z, double*, int, u8);
SQLITE_PRIVATE int sqlite3GetInt32(const char *, int*);
SQLITE_PRIVATE int sqlite3Atoi(const char*);
+#ifndef SQLITE_OMIT_UTF16
SQLITE_PRIVATE int sqlite3Utf16ByteLen(const void *pData, int nChar);
+#endif
SQLITE_PRIVATE int sqlite3Utf8CharLen(const char *pData, int nByte);
SQLITE_PRIVATE u32 sqlite3Utf8Read(const u8**);
SQLITE_PRIVATE LogEst sqlite3LogEst(u64);
#ifndef SQLITE_OMIT_VIRTUALTABLE
SQLITE_PRIVATE LogEst sqlite3LogEstFromDouble(double);
#endif
+#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
+ defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \
+ defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst);
+#endif
+SQLITE_PRIVATE VList *sqlite3VListAdd(sqlite3*,VList*,const char*,int,int);
+SQLITE_PRIVATE const char *sqlite3VListNumToName(VList*,int);
+SQLITE_PRIVATE int sqlite3VListNameToNum(VList*,const char*,int);
/*
** Routines to read and write variable-length integers. These used to
SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe*, Table*, int);
SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2);
SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
+SQLITE_PRIVATE char sqlite3TableColumnAffinity(Table*,int);
SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr);
SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8);
SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*);
SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...);
SQLITE_PRIVATE void sqlite3Error(sqlite3*,int);
+SQLITE_PRIVATE void sqlite3SystemError(sqlite3*,int);
SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
SQLITE_PRIVATE u8 sqlite3HexToInt(int h);
SQLITE_PRIVATE int sqlite3TwoPartName(Parse *, Token *, Token *, Token **);
SQLITE_PRIVATE const char *sqlite3ErrName(int);
#endif
+#ifdef SQLITE_ENABLE_DESERIALIZE
+SQLITE_PRIVATE int sqlite3MemdbInit(void);
+#endif
+
SQLITE_PRIVATE const char *sqlite3ErrStr(int);
SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse);
SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
+SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr);
+SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse*,Expr*,Expr*);
SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int);
SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*);
SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8);
SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8);
-SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8,
+SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8,
void(*)(void*));
SQLITE_PRIVATE void sqlite3ValueSetNull(sqlite3_value*);
SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value*);
SQLITE_PRIVATE sqlite3_value *sqlite3ValueNew(sqlite3 *);
+#ifndef SQLITE_OMIT_UTF16
SQLITE_PRIVATE char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8);
+#endif
SQLITE_PRIVATE int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **);
SQLITE_PRIVATE void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8);
#ifndef SQLITE_AMALGAMATION
SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[];
+SQLITE_PRIVATE const char sqlite3StrBINARY[];
SQLITE_PRIVATE const unsigned char sqlite3UpperToLower[];
SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[];
SQLITE_PRIVATE const Token sqlite3IntTokens[];
SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config;
-SQLITE_PRIVATE SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
+SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
#ifndef SQLITE_OMIT_WSD
SQLITE_PRIVATE int sqlite3PendingByte;
#endif
#endif
+#ifdef VDBE_PROFILE
+SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt;
+#endif
SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3*, int, int, int);
SQLITE_PRIVATE void sqlite3Reindex(Parse*, Token*, Token*);
SQLITE_PRIVATE void sqlite3AlterFunctions(void);
SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *);
SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...);
SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*);
-SQLITE_PRIVATE int sqlite3CodeSubselect(Parse *, Expr *, int, int);
+SQLITE_PRIVATE int sqlite3CodeSubselect(Parse*, Expr *, int, int);
SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*);
SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
SQLITE_PRIVATE int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*);
SQLITE_PRIVATE char sqlite3AffinityType(const char*, u8*);
SQLITE_PRIVATE void sqlite3Analyze(Parse*, Token*, Token*);
-SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*);
+SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*, sqlite3_file*);
SQLITE_PRIVATE int sqlite3FindDb(sqlite3*, Token*);
SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *, const char *);
SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3*,int iDB);
SQLITE_PRIVATE void sqlite3DefaultRowEst(Index*);
SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3*, int);
SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*);
-SQLITE_PRIVATE void sqlite3MinimumFileFormat(Parse*, int, int);
SQLITE_PRIVATE void sqlite3SchemaClear(void *);
SQLITE_PRIVATE Schema *sqlite3SchemaGet(sqlite3 *, Btree *);
SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *);
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo*);
#endif
-SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *,
+SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *,
void (*)(sqlite3_context*,int,sqlite3_value **),
void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*),
FuncDestructor *pDestructor
);
+SQLITE_PRIVATE void sqlite3OomFault(sqlite3*);
+SQLITE_PRIVATE void sqlite3OomClear(sqlite3*);
SQLITE_PRIVATE int sqlite3ApiExit(sqlite3 *db, int);
SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *);
SQLITE_PRIVATE void sqlite3BackupRestart(sqlite3_backup *);
SQLITE_PRIVATE void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
+#ifndef SQLITE_OMIT_SUBQUERY
+SQLITE_PRIVATE int sqlite3ExprCheckIN(Parse*, Expr*);
+#else
+# define sqlite3ExprCheckIN(x,y) SQLITE_OK
+#endif
+
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void);
-SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
+SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(
+ Parse*,Index*,UnpackedRecord**,Expr*,int,int,int*);
SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*);
SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
+SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3*, Index*, int);
#endif
/*
** The interface to the LEMON-generated parser
*/
-SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64));
-SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*));
+#ifndef SQLITE_AMALGAMATION
+SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64));
+SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*));
+#endif
SQLITE_PRIVATE void sqlite3Parser(void*, int, Token, Parse*);
#ifdef YYTRACKMAXSTACKDEPTH
SQLITE_PRIVATE int sqlite3ParserStackPeak(void*);
# define sqlite3VtabRollback(X)
# define sqlite3VtabCommit(X)
# define sqlite3VtabInSync(db) 0
-# define sqlite3VtabLock(X)
+# define sqlite3VtabLock(X)
# define sqlite3VtabUnlock(X)
# define sqlite3VtabUnlockList(X)
# define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK
SQLITE_PRIVATE int sqlite3VtabSavepoint(sqlite3 *, int, int);
SQLITE_PRIVATE void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*);
SQLITE_PRIVATE VTable *sqlite3GetVTable(sqlite3*, Table*);
+SQLITE_PRIVATE Module *sqlite3VtabCreateModule(
+ sqlite3*,
+ const char*,
+ const sqlite3_module*,
+ void*,
+ void(*)(void*)
+ );
# define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0)
#endif
SQLITE_PRIVATE int sqlite3VtabEponymousTableInit(Parse*,Module*);
** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
** key functionality is available. If OMIT_TRIGGER is defined but
** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
-** this case foreign keys are parsed, but no other functionality is
+** this case foreign keys are parsed, but no other functionality is
** provided (enforcement of FK constraints requires the triggers sub-system).
*/
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
#define sqlite3FkDropTable(a,b,c)
#define sqlite3FkOldmask(a,b) 0
#define sqlite3FkRequired(a,b,c,d) 0
+ #define sqlite3FkReferences(a) 0
#endif
#ifndef SQLITE_OMIT_FOREIGN_KEY
SQLITE_PRIVATE void sqlite3FkDelete(sqlite3 *, Table*);
/*
** The interface to the code in fault.c used for identifying "benign"
-** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST
+** malloc failures. This is only present if SQLITE_UNTESTABLE
** is not defined.
*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE void sqlite3BeginBenignMalloc(void);
SQLITE_PRIVATE void sqlite3EndBenignMalloc(void);
#else
#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */
#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */
#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
+SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*);
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
-SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
-SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
+SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
+SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *);
-SQLITE_PRIVATE int sqlite3JournalExists(sqlite3_file *p);
-#else
- #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
- #define sqlite3JournalExists(p) 1
#endif
+SQLITE_PRIVATE int sqlite3JournalIsInMemory(sqlite3_file *p);
SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *);
-SQLITE_PRIVATE int sqlite3MemJournalSize(void);
-SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *);
SQLITE_PRIVATE void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p);
#if SQLITE_MAX_EXPR_DEPTH>0
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE void sqlite3ParserTrace(FILE*, char *);
#endif
+#if defined(YYCOVERAGE)
+SQLITE_PRIVATE int sqlite3ParserCoverage(FILE*);
+#endif
/*
** If the SQLITE_ENABLE IOTRACE exists then the global variable
** sqlite3IoTrace is a pointer to a printf-like routine used to
-** print I/O tracing messages.
+** print I/O tracing messages.
*/
#ifdef SQLITE_ENABLE_IOTRACE
# define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; }
** that allocations that might have been satisfied by lookaside are not
** passed back to non-lookaside free() routines. Asserts such as the
** example above are placed on the non-lookaside free() routines to verify
-** this constraint.
+** this constraint.
**
** All of this is no-op for a production build. It only comes into
** play when the SQLITE_MEMDEBUG compile-time option is used.
#endif
#define MEMTYPE_HEAP 0x01 /* General heap allocations */
#define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */
-#define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */
-#define MEMTYPE_PCACHE 0x08 /* Page cache allocations */
+#define MEMTYPE_PCACHE 0x04 /* Page cache allocations */
/*
** Threading interface
SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread*, void**);
#endif
+#if defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST)
+SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3*);
+#endif
#if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST)
SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*);
#endif
-#endif /* _SQLITEINT_H_ */
+SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr);
+SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr);
+SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int);
+SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int);
+SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse*, Expr*);
+
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+SQLITE_PRIVATE const char **sqlite3CompileOptions(int *pnOpt);
+#endif
+
+#endif /* SQLITEINT_H */
/************** End of sqliteInt.h *******************************************/
/************** Begin file global.c ******************************************/
** isxdigit() 0x08
** toupper() 0x20
** SQLite identifier character 0x40
+** Quote character 0x80
**
** Bit 0x20 is set if the mapped character requires translation to upper
** case. i.e. if the character is a lower-case ASCII character.
**
** (x & ~(map[x]&0x20))
**
-** Standard function tolower() is implemented using the sqlite3UpperToLower[]
+** The equivalent of tolower() is implemented using the sqlite3UpperToLower[]
** array. tolower() is used more often than toupper() by SQLite.
**
-** Bit 0x40 is set if the character non-alphanumeric and can be used in an
+** Bit 0x40 is set if the character is non-alphanumeric and can be used in an
** SQLite identifier. Identifiers are alphanumerics, "_", "$", and any
** non-ASCII UTF character. Hence the test for whether or not a character is
** part of an identifier is 0x46.
-**
-** SQLite's versions are identical to the standard versions assuming a
-** locale of "C". They are implemented as macros in sqliteInt.h.
*/
#ifdef SQLITE_ASCII
SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[256] = {
0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, /* 08..0f ........ */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10..17 ........ */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 18..1f ........ */
- 0x01, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, /* 20..27 !"#$%&' */
+ 0x01, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x80, /* 20..27 !"#$%&' */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 28..2f ()*+,-./ */
0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, /* 30..37 01234567 */
0x0c, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 38..3f 89:;<=>? */
0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x02, /* 40..47 @ABCDEFG */
0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 48..4f HIJKLMNO */
0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 50..57 PQRSTUVW */
- 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x40, /* 58..5f XYZ[\]^_ */
- 0x00, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x22, /* 60..67 `abcdefg */
+ 0x02, 0x02, 0x02, 0x80, 0x00, 0x00, 0x00, 0x40, /* 58..5f XYZ[\]^_ */
+ 0x80, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x22, /* 60..67 `abcdefg */
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 68..6f hijklmno */
0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 70..77 pqrstuvw */
0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, /* 78..7f xyz{|}~. */
** EVIDENCE-OF: R-43642-56306 By default, URI handling is globally
** disabled. The default value may be changed by compiling with the
** SQLITE_USE_URI symbol defined.
+**
+** URI filenames are enabled by default if SQLITE_HAS_CODEC is
+** enabled.
*/
#ifndef SQLITE_USE_URI
-# define SQLITE_USE_URI 0
+# ifdef SQLITE_HAS_CODEC
+# define SQLITE_USE_URI 1
+# else
+# define SQLITE_USE_URI 0
+# endif
#endif
/* EVIDENCE-OF: R-38720-18127 The default setting is determined by the
# define SQLITE_SORTER_PMASZ 250
#endif
+/* Statement journals spill to disk when their size exceeds the following
+** threshold (in bytes). 0 means that statement journals are created and
+** written to disk immediately (the default behavior for SQLite versions
+** before 3.12.0). -1 means always keep the entire statement journal in
+** memory. (The statement journal is also always held entirely in memory
+** if journal_mode=MEMORY or if temp_store=MEMORY, regardless of this
+** setting.)
+*/
+#ifndef SQLITE_STMTJRNL_SPILL
+# define SQLITE_STMTJRNL_SPILL (64*1024)
+#endif
+
+/*
+** The default lookaside-configuration, the format "SZ,N". SZ is the
+** number of bytes in each lookaside slot (should be a multiple of 8)
+** and N is the number of slots. The lookaside-configuration can be
+** changed as start-time using sqlite3_config(SQLITE_CONFIG_LOOKASIDE)
+** or at run-time for an individual database connection using
+** sqlite3_db_config(db, SQLITE_DBCONFIG_LOOKASIDE);
+*/
+#ifndef SQLITE_DEFAULT_LOOKASIDE
+# define SQLITE_DEFAULT_LOOKASIDE 1200,100
+#endif
+
+
/*
** The following singleton contains the global configuration for
** the SQLite library.
SQLITE_THREADSAFE==1, /* bFullMutex */
SQLITE_USE_URI, /* bOpenUri */
SQLITE_ALLOW_COVERING_INDEX_SCAN, /* bUseCis */
+ 0, /* bSmallMalloc */
0x7ffffffe, /* mxStrlen */
0, /* neverCorrupt */
- 128, /* szLookaside */
- 500, /* nLookaside */
+ SQLITE_DEFAULT_LOOKASIDE, /* szLookaside, nLookaside */
+ SQLITE_STMTJRNL_SPILL, /* nStmtSpill */
{0,0,0,0,0,0,0,0}, /* m */
{0,0,0,0,0,0,0,0,0}, /* mutex */
{0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
0, 0, /* mnHeap, mxHeap */
SQLITE_DEFAULT_MMAP_SIZE, /* szMmap */
SQLITE_MAX_MMAP_SIZE, /* mxMmap */
- (void*)0, /* pScratch */
- 0, /* szScratch */
- 0, /* nScratch */
(void*)0, /* pPage */
0, /* szPage */
SQLITE_DEFAULT_PCACHE_INITSZ, /* nPage */
0, /* xVdbeBranch */
0, /* pVbeBranchArg */
#endif
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
0, /* xTestCallback */
#endif
- 0 /* bLocaltimeFault */
+ 0, /* bLocaltimeFault */
+ 0x7ffffffe /* iOnceResetThreshold */
};
/*
** database connections. After initialization, this table is
** read-only.
*/
-SQLITE_PRIVATE SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
+SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
/*
** Constant tokens for values 0 and 1.
{ "1", 1 }
};
+#ifdef VDBE_PROFILE
+/*
+** The following performance counter can be used in place of
+** sqlite3Hwtime() for profiling. This is a no-op on standard builds.
+*/
+SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt = 0;
+#endif
/*
** The value of the "pending" byte must be 0x40000000 (1 byte past the
** 1-gibabyte boundary) in a compatible database. SQLite never uses
** the database page that contains the pending byte. It never attempts
-** to read or write that page. The pending byte page is set assign
+** to read or write that page. The pending byte page is set aside
** for use by the VFS layers as space for managing file locks.
**
** During testing, it is often desirable to move the pending byte to
*/
SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[] = OPFLG_INITIALIZER;
-/************** End of global.c **********************************************/
-/************** Begin file ctime.c *******************************************/
-/*
-** 2010 February 23
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file implements routines used to report what compile-time options
-** SQLite was built with.
-*/
-
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-
-/* #include "sqliteInt.h" */
-
/*
-** An array of names of all compile-time options. This array should
-** be sorted A-Z.
-**
-** This array looks large, but in a typical installation actually uses
-** only a handful of compile-time options, so most times this array is usually
-** rather short and uses little memory space.
+** Name of the default collating sequence
*/
-static const char * const azCompileOpt[] = {
-
-/* These macros are provided to "stringify" the value of the define
-** for those options in which the value is meaningful. */
-#define CTIMEOPT_VAL_(opt) #opt
-#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)
+SQLITE_PRIVATE const char sqlite3StrBINARY[] = "BINARY";
-#if SQLITE_32BIT_ROWID
- "32BIT_ROWID",
-#endif
-#if SQLITE_4_BYTE_ALIGNED_MALLOC
- "4_BYTE_ALIGNED_MALLOC",
-#endif
-#if SQLITE_CASE_SENSITIVE_LIKE
- "CASE_SENSITIVE_LIKE",
-#endif
-#if SQLITE_CHECK_PAGES
- "CHECK_PAGES",
-#endif
-#if SQLITE_COVERAGE_TEST
- "COVERAGE_TEST",
-#endif
-#if SQLITE_DEBUG
- "DEBUG",
-#endif
-#if SQLITE_DEFAULT_LOCKING_MODE
- "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE),
-#endif
-#if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc)
- "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE),
-#endif
-#if SQLITE_DISABLE_DIRSYNC
- "DISABLE_DIRSYNC",
-#endif
-#if SQLITE_DISABLE_LFS
- "DISABLE_LFS",
-#endif
-#if SQLITE_ENABLE_API_ARMOR
- "ENABLE_API_ARMOR",
-#endif
-#if SQLITE_ENABLE_ATOMIC_WRITE
- "ENABLE_ATOMIC_WRITE",
-#endif
-#if SQLITE_ENABLE_CEROD
- "ENABLE_CEROD",
-#endif
-#if SQLITE_ENABLE_COLUMN_METADATA
- "ENABLE_COLUMN_METADATA",
-#endif
-#if SQLITE_ENABLE_DBSTAT_VTAB
- "ENABLE_DBSTAT_VTAB",
-#endif
-#if SQLITE_ENABLE_EXPENSIVE_ASSERT
- "ENABLE_EXPENSIVE_ASSERT",
-#endif
-#if SQLITE_ENABLE_FTS1
- "ENABLE_FTS1",
-#endif
-#if SQLITE_ENABLE_FTS2
- "ENABLE_FTS2",
-#endif
-#if SQLITE_ENABLE_FTS3
- "ENABLE_FTS3",
-#endif
-#if SQLITE_ENABLE_FTS3_PARENTHESIS
- "ENABLE_FTS3_PARENTHESIS",
-#endif
-#if SQLITE_ENABLE_FTS4
- "ENABLE_FTS4",
-#endif
-#if SQLITE_ENABLE_FTS5
- "ENABLE_FTS5",
-#endif
-#if SQLITE_ENABLE_ICU
- "ENABLE_ICU",
-#endif
-#if SQLITE_ENABLE_IOTRACE
- "ENABLE_IOTRACE",
-#endif
-#if SQLITE_ENABLE_JSON1
- "ENABLE_JSON1",
-#endif
-#if SQLITE_ENABLE_LOAD_EXTENSION
- "ENABLE_LOAD_EXTENSION",
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE
- "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE),
-#endif
-#if SQLITE_ENABLE_MEMORY_MANAGEMENT
- "ENABLE_MEMORY_MANAGEMENT",
-#endif
-#if SQLITE_ENABLE_MEMSYS3
- "ENABLE_MEMSYS3",
-#endif
-#if SQLITE_ENABLE_MEMSYS5
- "ENABLE_MEMSYS5",
-#endif
-#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK
- "ENABLE_OVERSIZE_CELL_CHECK",
-#endif
-#if SQLITE_ENABLE_RTREE
- "ENABLE_RTREE",
-#endif
-#if defined(SQLITE_ENABLE_STAT4)
- "ENABLE_STAT4",
-#elif defined(SQLITE_ENABLE_STAT3)
- "ENABLE_STAT3",
-#endif
-#if SQLITE_ENABLE_UNLOCK_NOTIFY
- "ENABLE_UNLOCK_NOTIFY",
-#endif
-#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT
- "ENABLE_UPDATE_DELETE_LIMIT",
-#endif
-#if SQLITE_HAS_CODEC
- "HAS_CODEC",
-#endif
-#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
- "HAVE_ISNAN",
-#endif
-#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- "HOMEGROWN_RECURSIVE_MUTEX",
-#endif
-#if SQLITE_IGNORE_AFP_LOCK_ERRORS
- "IGNORE_AFP_LOCK_ERRORS",
-#endif
-#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- "IGNORE_FLOCK_LOCK_ERRORS",
-#endif
-#ifdef SQLITE_INT64_TYPE
- "INT64_TYPE",
-#endif
-#if SQLITE_LOCK_TRACE
- "LOCK_TRACE",
-#endif
-#if defined(SQLITE_MAX_MMAP_SIZE) && !defined(SQLITE_MAX_MMAP_SIZE_xc)
- "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE),
-#endif
-#ifdef SQLITE_MAX_SCHEMA_RETRY
- "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY),
-#endif
-#if SQLITE_MEMDEBUG
- "MEMDEBUG",
-#endif
-#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT
- "MIXED_ENDIAN_64BIT_FLOAT",
-#endif
-#if SQLITE_NO_SYNC
- "NO_SYNC",
-#endif
-#if SQLITE_OMIT_ALTERTABLE
- "OMIT_ALTERTABLE",
-#endif
-#if SQLITE_OMIT_ANALYZE
- "OMIT_ANALYZE",
-#endif
-#if SQLITE_OMIT_ATTACH
- "OMIT_ATTACH",
-#endif
-#if SQLITE_OMIT_AUTHORIZATION
- "OMIT_AUTHORIZATION",
-#endif
-#if SQLITE_OMIT_AUTOINCREMENT
- "OMIT_AUTOINCREMENT",
-#endif
-#if SQLITE_OMIT_AUTOINIT
- "OMIT_AUTOINIT",
-#endif
-#if SQLITE_OMIT_AUTOMATIC_INDEX
- "OMIT_AUTOMATIC_INDEX",
-#endif
-#if SQLITE_OMIT_AUTORESET
- "OMIT_AUTORESET",
-#endif
-#if SQLITE_OMIT_AUTOVACUUM
- "OMIT_AUTOVACUUM",
-#endif
-#if SQLITE_OMIT_BETWEEN_OPTIMIZATION
- "OMIT_BETWEEN_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_BLOB_LITERAL
- "OMIT_BLOB_LITERAL",
-#endif
-#if SQLITE_OMIT_BTREECOUNT
- "OMIT_BTREECOUNT",
-#endif
-#if SQLITE_OMIT_BUILTIN_TEST
- "OMIT_BUILTIN_TEST",
-#endif
-#if SQLITE_OMIT_CAST
- "OMIT_CAST",
-#endif
-#if SQLITE_OMIT_CHECK
- "OMIT_CHECK",
-#endif
-#if SQLITE_OMIT_COMPLETE
- "OMIT_COMPLETE",
-#endif
-#if SQLITE_OMIT_COMPOUND_SELECT
- "OMIT_COMPOUND_SELECT",
-#endif
-#if SQLITE_OMIT_CTE
- "OMIT_CTE",
-#endif
-#if SQLITE_OMIT_DATETIME_FUNCS
- "OMIT_DATETIME_FUNCS",
-#endif
-#if SQLITE_OMIT_DECLTYPE
- "OMIT_DECLTYPE",
-#endif
-#if SQLITE_OMIT_DEPRECATED
- "OMIT_DEPRECATED",
-#endif
-#if SQLITE_OMIT_DISKIO
- "OMIT_DISKIO",
-#endif
-#if SQLITE_OMIT_EXPLAIN
- "OMIT_EXPLAIN",
-#endif
-#if SQLITE_OMIT_FLAG_PRAGMAS
- "OMIT_FLAG_PRAGMAS",
-#endif
-#if SQLITE_OMIT_FLOATING_POINT
- "OMIT_FLOATING_POINT",
-#endif
-#if SQLITE_OMIT_FOREIGN_KEY
- "OMIT_FOREIGN_KEY",
-#endif
-#if SQLITE_OMIT_GET_TABLE
- "OMIT_GET_TABLE",
-#endif
-#if SQLITE_OMIT_INCRBLOB
- "OMIT_INCRBLOB",
-#endif
-#if SQLITE_OMIT_INTEGRITY_CHECK
- "OMIT_INTEGRITY_CHECK",
-#endif
-#if SQLITE_OMIT_LIKE_OPTIMIZATION
- "OMIT_LIKE_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_LOAD_EXTENSION
- "OMIT_LOAD_EXTENSION",
-#endif
-#if SQLITE_OMIT_LOCALTIME
- "OMIT_LOCALTIME",
-#endif
-#if SQLITE_OMIT_LOOKASIDE
- "OMIT_LOOKASIDE",
-#endif
-#if SQLITE_OMIT_MEMORYDB
- "OMIT_MEMORYDB",
-#endif
-#if SQLITE_OMIT_OR_OPTIMIZATION
- "OMIT_OR_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_PAGER_PRAGMAS
- "OMIT_PAGER_PRAGMAS",
-#endif
-#if SQLITE_OMIT_PRAGMA
- "OMIT_PRAGMA",
-#endif
-#if SQLITE_OMIT_PROGRESS_CALLBACK
- "OMIT_PROGRESS_CALLBACK",
-#endif
-#if SQLITE_OMIT_QUICKBALANCE
- "OMIT_QUICKBALANCE",
-#endif
-#if SQLITE_OMIT_REINDEX
- "OMIT_REINDEX",
-#endif
-#if SQLITE_OMIT_SCHEMA_PRAGMAS
- "OMIT_SCHEMA_PRAGMAS",
-#endif
-#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
- "OMIT_SCHEMA_VERSION_PRAGMAS",
-#endif
-#if SQLITE_OMIT_SHARED_CACHE
- "OMIT_SHARED_CACHE",
-#endif
-#if SQLITE_OMIT_SUBQUERY
- "OMIT_SUBQUERY",
-#endif
-#if SQLITE_OMIT_TCL_VARIABLE
- "OMIT_TCL_VARIABLE",
-#endif
-#if SQLITE_OMIT_TEMPDB
- "OMIT_TEMPDB",
-#endif
-#if SQLITE_OMIT_TRACE
- "OMIT_TRACE",
-#endif
-#if SQLITE_OMIT_TRIGGER
- "OMIT_TRIGGER",
-#endif
-#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION
- "OMIT_TRUNCATE_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_UTF16
- "OMIT_UTF16",
-#endif
-#if SQLITE_OMIT_VACUUM
- "OMIT_VACUUM",
-#endif
-#if SQLITE_OMIT_VIEW
- "OMIT_VIEW",
-#endif
-#if SQLITE_OMIT_VIRTUALTABLE
- "OMIT_VIRTUALTABLE",
-#endif
-#if SQLITE_OMIT_WAL
- "OMIT_WAL",
-#endif
-#if SQLITE_OMIT_WSD
- "OMIT_WSD",
-#endif
-#if SQLITE_OMIT_XFER_OPT
- "OMIT_XFER_OPT",
-#endif
-#if SQLITE_PERFORMANCE_TRACE
- "PERFORMANCE_TRACE",
-#endif
-#if SQLITE_PROXY_DEBUG
- "PROXY_DEBUG",
-#endif
-#if SQLITE_RTREE_INT_ONLY
- "RTREE_INT_ONLY",
-#endif
-#if SQLITE_SECURE_DELETE
- "SECURE_DELETE",
-#endif
-#if SQLITE_SMALL_STACK
- "SMALL_STACK",
-#endif
-#if SQLITE_SOUNDEX
- "SOUNDEX",
-#endif
-#if SQLITE_SYSTEM_MALLOC
- "SYSTEM_MALLOC",
-#endif
-#if SQLITE_TCL
- "TCL",
-#endif
-#if defined(SQLITE_TEMP_STORE) && !defined(SQLITE_TEMP_STORE_xc)
- "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE),
-#endif
-#if SQLITE_TEST
- "TEST",
-#endif
-#if defined(SQLITE_THREADSAFE)
- "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE),
-#endif
-#if SQLITE_USE_ALLOCA
- "USE_ALLOCA",
-#endif
-#if SQLITE_USER_AUTHENTICATION
- "USER_AUTHENTICATION",
-#endif
-#if SQLITE_WIN32_MALLOC
- "WIN32_MALLOC",
-#endif
-#if SQLITE_ZERO_MALLOC
- "ZERO_MALLOC"
-#endif
-};
-
-/*
-** Given the name of a compile-time option, return true if that option
-** was used and false if not.
-**
-** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
-** is not required for a match.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName){
- int i, n;
-
-#if SQLITE_ENABLE_API_ARMOR
- if( zOptName==0 ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
- if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
- n = sqlite3Strlen30(zOptName);
-
- /* Since ArraySize(azCompileOpt) is normally in single digits, a
- ** linear search is adequate. No need for a binary search. */
- for(i=0; i<ArraySize(azCompileOpt); i++){
- if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0
- && sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0
- ){
- return 1;
- }
- }
- return 0;
-}
-
-/*
-** Return the N-th compile-time option string. If N is out of range,
-** return a NULL pointer.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N){
- if( N>=0 && N<ArraySize(azCompileOpt) ){
- return azCompileOpt[N];
- }
- return 0;
-}
-
-#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
-
-/************** End of ctime.c ***********************************************/
+/************** End of global.c **********************************************/
/************** Begin file status.c ******************************************/
/*
** 2008 June 18
** 6000 lines long) it was split up into several smaller files and
** this header information was factored out.
*/
-#ifndef _VDBEINT_H_
-#define _VDBEINT_H_
+#ifndef SQLITE_VDBEINT_H
+#define SQLITE_VDBEINT_H
/*
** The maximum number of times that a statement will try to reparse
# define SQLITE_MAX_SCHEMA_RETRY 50
#endif
+/*
+** VDBE_DISPLAY_P4 is true or false depending on whether or not the
+** "explain" P4 display logic is enabled.
+*/
+#if !defined(SQLITE_OMIT_EXPLAIN) || !defined(NDEBUG) \
+ || defined(VDBE_PROFILE) || defined(SQLITE_DEBUG)
+# define VDBE_DISPLAY_P4 1
+#else
+# define VDBE_DISPLAY_P4 0
+#endif
+
/*
** SQL is translated into a sequence of instructions to be
** executed by a virtual machine. Each instruction is an instance
/* Opaque type used by code in vdbesort.c */
typedef struct VdbeSorter VdbeSorter;
-/* Opaque type used by the explainer */
-typedef struct Explain Explain;
-
/* Elements of the linked list at Vdbe.pAuxData */
typedef struct AuxData AuxData;
+/* Types of VDBE cursors */
+#define CURTYPE_BTREE 0
+#define CURTYPE_SORTER 1
+#define CURTYPE_VTAB 2
+#define CURTYPE_PSEUDO 3
+
/*
-** A cursor is a pointer into a single BTree within a database file.
-** The cursor can seek to a BTree entry with a particular key, or
-** loop over all entries of the Btree. You can also insert new BTree
-** entries or retrieve the key or data from the entry that the cursor
-** is currently pointing to.
+** A VdbeCursor is an superclass (a wrapper) for various cursor objects:
**
-** Cursors can also point to virtual tables, sorters, or "pseudo-tables".
-** A pseudo-table is a single-row table implemented by registers.
-**
-** Every cursor that the virtual machine has open is represented by an
-** instance of the following structure.
+** * A b-tree cursor
+** - In the main database or in an ephemeral database
+** - On either an index or a table
+** * A sorter
+** * A virtual table
+** * A one-row "pseudotable" stored in a single register
*/
+typedef struct VdbeCursor VdbeCursor;
struct VdbeCursor {
- BtCursor *pCursor; /* The cursor structure of the backend */
- Btree *pBt; /* Separate file holding temporary table */
- KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */
- int seekResult; /* Result of previous sqlite3BtreeMoveto() */
- int pseudoTableReg; /* Register holding pseudotable content. */
- i16 nField; /* Number of fields in the header */
- u16 nHdrParsed; /* Number of header fields parsed so far */
+ u8 eCurType; /* One of the CURTYPE_* values above */
+ i8 iDb; /* Index of cursor database in db->aDb[] (or -1) */
+ u8 nullRow; /* True if pointing to a row with no data */
+ u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */
+ u8 isTable; /* True for rowid tables. False for indexes */
#ifdef SQLITE_DEBUG
- u8 seekOp; /* Most recent seek operation on this cursor */
-#endif
- i8 iDb; /* Index of cursor database in db->aDb[] (or -1) */
- u8 nullRow; /* True if pointing to a row with no data */
- u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */
- Bool isEphemeral:1; /* True for an ephemeral table */
- Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
- Bool isTable:1; /* True if a table requiring integer keys */
- Bool isOrdered:1; /* True if the underlying table is BTREE_UNORDERED */
- Pgno pgnoRoot; /* Root page of the open btree cursor */
- sqlite3_vtab_cursor *pVtabCursor; /* The cursor for a virtual table */
- i64 seqCount; /* Sequence counter */
- i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */
- VdbeSorter *pSorter; /* Sorter object for OP_SorterOpen cursors */
-#ifdef SQLITE_ENABLE_COLUMN_USED_MASK
- u64 maskUsed; /* Mask of columns used by this cursor */
+ u8 seekOp; /* Most recent seek operation on this cursor */
+ u8 wrFlag; /* The wrFlag argument to sqlite3BtreeCursor() */
#endif
+ Bool isEphemeral:1; /* True for an ephemeral table */
+ Bool useRandomRowid:1; /* Generate new record numbers semi-randomly */
+ Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */
+ Btree *pBtx; /* Separate file holding temporary table */
+ i64 seqCount; /* Sequence counter */
+ int *aAltMap; /* Mapping from table to index column numbers */
- /* Cached information about the header for the data record that the
- ** cursor is currently pointing to. Only valid if cacheStatus matches
+ /* Cached OP_Column parse information is only valid if cacheStatus matches
** Vdbe.cacheCtr. Vdbe.cacheCtr will never take on the value of
- ** CACHE_STALE and so setting cacheStatus=CACHE_STALE guarantees that
- ** the cache is out of date.
- **
- ** aRow might point to (ephemeral) data for the current row, or it might
- ** be NULL.
- */
- u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */
- u32 payloadSize; /* Total number of bytes in the record */
- u32 szRow; /* Byte available in aRow */
- u32 iHdrOffset; /* Offset to next unparsed byte of the header */
- const u8 *aRow; /* Data for the current row, if all on one page */
- u32 *aOffset; /* Pointer to aType[nField] */
- u32 aType[1]; /* Type values for all entries in the record */
+ ** CACHE_STALE (0) and so setting cacheStatus=CACHE_STALE guarantees that
+ ** the cache is out of date. */
+ u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */
+ int seekResult; /* Result of previous sqlite3BtreeMoveto() or 0
+ ** if there have been no prior seeks on the cursor. */
+ /* seekResult does not distinguish between "no seeks have ever occurred
+ ** on this cursor" and "the most recent seek was an exact match".
+ ** For CURTYPE_PSEUDO, seekResult is the register holding the record */
+
+ /* When a new VdbeCursor is allocated, only the fields above are zeroed.
+ ** The fields that follow are uninitialized, and must be individually
+ ** initialized prior to first use. */
+ VdbeCursor *pAltCursor; /* Associated index cursor from which to read */
+ union {
+ BtCursor *pCursor; /* CURTYPE_BTREE or _PSEUDO. Btree cursor */
+ sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */
+ VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */
+ } uc;
+ KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */
+ u32 iHdrOffset; /* Offset to next unparsed byte of the header */
+ Pgno pgnoRoot; /* Root page of the open btree cursor */
+ i16 nField; /* Number of fields in the header */
+ u16 nHdrParsed; /* Number of header fields parsed so far */
+ i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */
+ u32 *aOffset; /* Pointer to aType[nField] */
+ const u8 *aRow; /* Data for the current row, if all on one page */
+ u32 payloadSize; /* Total number of bytes in the record */
+ u32 szRow; /* Byte available in aRow */
+#ifdef SQLITE_ENABLE_COLUMN_USED_MASK
+ u64 maskUsed; /* Mask of columns used by this cursor */
+#endif
+
/* 2*nField extra array elements allocated for aType[], beyond the one
** static element declared in the structure. nField total array slots for
** aType[] and nField+1 array slots for aOffset[] */
+ u32 aType[1]; /* Type values record decode. MUST BE LAST */
};
-typedef struct VdbeCursor VdbeCursor;
+
+
+/*
+** A value for VdbeCursor.cacheStatus that means the cache is always invalid.
+*/
+#define CACHE_STALE 0
/*
** When a sub-program is executed (OP_Program), a structure of this type
Op *aOp; /* Program instructions for parent frame */
i64 *anExec; /* Event counters from parent frame */
Mem *aMem; /* Array of memory cells for parent frame */
- u8 *aOnceFlag; /* Array of OP_Once flags for parent frame */
VdbeCursor **apCsr; /* Array of Vdbe cursors for parent frame */
+ u8 *aOnce; /* Bitmask used by OP_Once */
void *token; /* Copy of SubProgram.token */
i64 lastRowid; /* Last insert rowid (sqlite3.lastRowid) */
+ AuxData *pAuxData; /* Linked list of auxdata allocations */
int nCursor; /* Number of entries in apCsr */
int pc; /* Program Counter in parent (calling) frame */
int nOp; /* Size of aOp array */
int nMem; /* Number of entries in aMem */
- int nOnceFlag; /* Number of entries in aOnceFlag */
int nChildMem; /* Number of memory cells for child frame */
int nChildCsr; /* Number of cursors for child frame */
int nChange; /* Statement changes (Vdbe.nChange) */
#define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))])
-/*
-** A value for VdbeCursor.cacheValid that means the cache is always invalid.
-*/
-#define CACHE_STALE 0
-
/*
** Internally, the vdbe manipulates nearly all SQL values as Mem
** structures. Each Mem struct may cache multiple representations (string,
** integer etc.) of the same value.
*/
-struct Mem {
+struct sqlite3_value {
union MemValue {
double r; /* Real value used when MEM_Real is set in flags */
i64 i; /* Integer value used when MEM_Int is set in flags */
- int nZero; /* Used when bit MEM_Zero is set in flags */
+ int nZero; /* Extra zero bytes when MEM_Zero and MEM_Blob set */
+ const char *zPType; /* Pointer type when MEM_Term|MEM_Subtype|MEM_Null */
FuncDef *pDef; /* Used only when flags==MEM_Agg */
RowSet *pRowSet; /* Used only when flags==MEM_RowSet */
VdbeFrame *pFrame; /* Used when flags==MEM_Frame */
** representations of the value stored in the Mem struct.
**
** If the MEM_Null flag is set, then the value is an SQL NULL value.
-** No other flags may be set in this case.
+** For a pointer type created using sqlite3_bind_pointer() or
+** sqlite3_result_pointer() the MEM_Term and MEM_Subtype flags are also set.
**
** If the MEM_Str flag is set then Mem.z points at a string representation.
** Usually this is encoded in the same unicode encoding as the main
** set, then the string is nul terminated. The MEM_Int and MEM_Real
** flags may coexist with the MEM_Str flag.
*/
-#define MEM_Null 0x0001 /* Value is NULL */
+#define MEM_Null 0x0001 /* Value is NULL (or a pointer) */
#define MEM_Str 0x0002 /* Value is a string */
#define MEM_Int 0x0004 /* Value is an integer */
#define MEM_Real 0x0008 /* Value is a real number */
#define MEM_Frame 0x0040 /* Value is a VdbeFrame object */
#define MEM_Undefined 0x0080 /* Value is undefined */
#define MEM_Cleared 0x0100 /* NULL set by OP_Null, not from data */
-#define MEM_TypeMask 0x01ff /* Mask of type bits */
+#define MEM_TypeMask 0xc1ff /* Mask of type bits */
/* Whenever Mem contains a valid string or blob representation, one of
** policy for Mem.z. The MEM_Term flag tells us whether or not the
** string is \000 or \u0000 terminated
*/
-#define MEM_Term 0x0200 /* String rep is nul terminated */
+#define MEM_Term 0x0200 /* String in Mem.z is zero terminated */
#define MEM_Dyn 0x0400 /* Need to call Mem.xDel() on Mem.z */
#define MEM_Static 0x0800 /* Mem.z points to a static string */
#define MEM_Ephem 0x1000 /* Mem.z points to an ephemeral string */
#define MEM_Agg 0x2000 /* Mem.z points to an agg function context */
#define MEM_Zero 0x4000 /* Mem.i contains count of 0s appended to blob */
+#define MEM_Subtype 0x8000 /* Mem.eSubtype is valid */
#ifdef SQLITE_OMIT_INCRBLOB
#undef MEM_Zero
#define MEM_Zero 0x0000
#endif
+/* Return TRUE if Mem X contains dynamically allocated content - anything
+** that needs to be deallocated to avoid a leak.
+*/
+#define VdbeMemDynamic(X) \
+ (((X)->flags&(MEM_Agg|MEM_Dyn|MEM_RowSet|MEM_Frame))!=0)
+
/*
** Clear any existing type flags from a Mem and replace them with f
*/
** when the VM is halted (if not before).
*/
struct AuxData {
- int iOp; /* Instruction number of OP_Function opcode */
- int iArg; /* Index of function argument. */
+ int iAuxOp; /* Instruction number of OP_Function opcode */
+ int iAuxArg; /* Index of function argument. */
void *pAux; /* Aux data pointer */
- void (*xDelete)(void *); /* Destructor for the aux data */
- AuxData *pNext; /* Next element in list */
+ void (*xDeleteAux)(void*); /* Destructor for the aux data */
+ AuxData *pNextAux; /* Next element in list */
};
/*
int iOp; /* Instruction number of OP_Function */
int isError; /* Error code returned by the function. */
u8 skipFlag; /* Skip accumulator loading if true */
- u8 fErrorOrAux; /* isError!=0 or pVdbe->pAuxData modified */
u8 argc; /* Number of arguments */
sqlite3_value *argv[1]; /* Argument set */
};
-/*
-** An Explain object accumulates indented output which is helpful
-** in describing recursive data structures.
-*/
-struct Explain {
- Vdbe *pVdbe; /* Attach the explanation to this Vdbe */
- StrAccum str; /* The string being accumulated */
- int nIndent; /* Number of elements in aIndent */
- u16 aIndent[100]; /* Levels of indentation */
- char zBase[100]; /* Initial space */
-};
-
/* A bitfield type for use inside of structures. Always follow with :N where
** N is the number of bits.
*/
*/
struct Vdbe {
sqlite3 *db; /* The database connection that owns this statement */
+ Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */
+ Parse *pParse; /* Parsing context used to create this Vdbe */
+ ynVar nVar; /* Number of entries in aVar[] */
+ u32 magic; /* Magic number for sanity checking */
+ int nMem; /* Number of memory locations currently allocated */
+ int nCursor; /* Number of slots in apCsr[] */
+ u32 cacheCtr; /* VdbeCursor row cache generation counter */
+ int pc; /* The program counter */
+ int rc; /* Value to return */
+ int nChange; /* Number of db changes made since last reset */
+ int iStatement; /* Statement number (or 0 if has not opened stmt) */
+ i64 iCurrentTime; /* Value of julianday('now') for this statement */
+ i64 nFkConstraint; /* Number of imm. FK constraints this VM */
+ i64 nStmtDefCons; /* Number of def. constraints when stmt started */
+ i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */
+
+ /* When allocating a new Vdbe object, all of the fields below should be
+ ** initialized to zero or NULL */
+
Op *aOp; /* Space to hold the virtual machine's program */
Mem *aMem; /* The memory locations */
Mem **apArg; /* Arguments to currently executing user function */
Mem *aColName; /* Column names to return */
Mem *pResultSet; /* Pointer to an array of results */
- Parse *pParse; /* Parsing context used to create this Vdbe */
- int nMem; /* Number of memory locations currently allocated */
- int nOp; /* Number of instructions in the program */
- int nCursor; /* Number of slots in apCsr[] */
- u32 magic; /* Magic number for sanity checking */
char *zErrMsg; /* Error message written here */
- Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */
VdbeCursor **apCsr; /* One element of this array for each open cursor */
Mem *aVar; /* Values for the OP_Variable opcode. */
- char **azVar; /* Name of variables */
- ynVar nVar; /* Number of entries in aVar[] */
- ynVar nzVar; /* Number of entries in azVar[] */
- u32 cacheCtr; /* VdbeCursor row cache generation counter */
- int pc; /* The program counter */
- int rc; /* Value to return */
+ VList *pVList; /* Name of variables */
+#ifndef SQLITE_OMIT_TRACE
+ i64 startTime; /* Time when query started - used for profiling */
+#endif
+ int nOp; /* Number of instructions in the program */
#ifdef SQLITE_DEBUG
int rcApp; /* errcode set by sqlite3_result_error_code() */
#endif
u16 nResColumn; /* Number of columns in one row of the result set */
u8 errorAction; /* Recovery action to do in case of an error */
u8 minWriteFileFormat; /* Minimum file format for writable database files */
+ u8 prepFlags; /* SQLITE_PREPARE_* flags */
+ bft expired:1; /* True if the VM needs to be recompiled */
+ bft doingRerun:1; /* True if rerunning after an auto-reprepare */
bft explain:2; /* True if EXPLAIN present on SQL command */
bft changeCntOn:1; /* True to update the change-counter */
- bft expired:1; /* True if the VM needs to be recompiled */
bft runOnlyOnce:1; /* Automatically expire on reset */
bft usesStmtJournal:1; /* True if uses a statement journal */
bft readOnly:1; /* True for statements that do not write */
bft bIsReader:1; /* True for statements that read */
- bft isPrepareV2:1; /* True if prepared with prepare_v2() */
- bft doingRerun:1; /* True if rerunning after an auto-reprepare */
- int nChange; /* Number of db changes made since last reset */
yDbMask btreeMask; /* Bitmask of db->aDb[] entries referenced */
yDbMask lockMask; /* Subset of btreeMask that requires a lock */
- int iStatement; /* Statement number (or 0 if has not opened stmt) */
- u32 aCounter[5]; /* Counters used by sqlite3_stmt_status() */
-#ifndef SQLITE_OMIT_TRACE
- i64 startTime; /* Time when query started - used for profiling */
-#endif
- i64 iCurrentTime; /* Value of julianday('now') for this statement */
- i64 nFkConstraint; /* Number of imm. FK constraints this VM */
- i64 nStmtDefCons; /* Number of def. constraints when stmt started */
- i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */
+ u32 aCounter[7]; /* Counters used by sqlite3_stmt_status() */
char *zSql; /* Text of the SQL statement that generated this */
void *pFree; /* Free this when deleting the vdbe */
VdbeFrame *pFrame; /* Parent frame */
int nFrame; /* Number of frames in pFrame list */
u32 expmask; /* Binding to these vars invalidates VM */
SubProgram *pProgram; /* Linked list of all sub-programs used by VM */
- int nOnceFlag; /* Size of array aOnceFlag[] */
- u8 *aOnceFlag; /* Flags for OP_Once */
AuxData *pAuxData; /* Linked list of auxdata allocations */
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
i64 *anExec; /* Number of times each op has been executed */
/*
** The following are allowed values for Vdbe.magic
*/
-#define VDBE_MAGIC_INIT 0x26bceaa5 /* Building a VDBE program */
-#define VDBE_MAGIC_RUN 0xbdf20da3 /* VDBE is ready to execute */
-#define VDBE_MAGIC_HALT 0x519c2973 /* VDBE has completed execution */
-#define VDBE_MAGIC_DEAD 0xb606c3c8 /* The VDBE has been deallocated */
+#define VDBE_MAGIC_INIT 0x16bceaa5 /* Building a VDBE program */
+#define VDBE_MAGIC_RUN 0x2df20da3 /* VDBE is ready to execute */
+#define VDBE_MAGIC_HALT 0x319c2973 /* VDBE has completed execution */
+#define VDBE_MAGIC_RESET 0x48fa9f76 /* Reset and ready to run again */
+#define VDBE_MAGIC_DEAD 0x5606c3c8 /* The VDBE has been deallocated */
+
+/*
+** Structure used to store the context required by the
+** sqlite3_preupdate_*() API functions.
+*/
+struct PreUpdate {
+ Vdbe *v;
+ VdbeCursor *pCsr; /* Cursor to read old values from */
+ int op; /* One of SQLITE_INSERT, UPDATE, DELETE */
+ u8 *aRecord; /* old.* database record */
+ KeyInfo keyinfo;
+ UnpackedRecord *pUnpacked; /* Unpacked version of aRecord[] */
+ UnpackedRecord *pNewUnpacked; /* Unpacked version of new.* record */
+ int iNewReg; /* Register for new.* values */
+ i64 iKey1; /* First key value passed to hook */
+ i64 iKey2; /* Second key value passed to hook */
+ Mem *aNew; /* Array of new.* values */
+ Table *pTab; /* Schema object being upated */
+ Index *pPk; /* PK index if pTab is WITHOUT ROWID */
+};
/*
** Function prototypes
SQLITE_PRIVATE void sqlite3VdbeError(Vdbe*, const char *, ...);
SQLITE_PRIVATE void sqlite3VdbeFreeCursor(Vdbe *, VdbeCursor*);
void sqliteVdbePopStack(Vdbe*,int);
-SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor*);
+SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor**, int*);
SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor*);
#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE*, int, Op*);
#endif
SQLITE_PRIVATE u32 sqlite3VdbeSerialTypeLen(u32);
-SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem*, int);
+SQLITE_PRIVATE u8 sqlite3VdbeOneByteSerialTypeLen(u8);
+SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem*, int, u32*);
SQLITE_PRIVATE u32 sqlite3VdbeSerialPut(unsigned char*, Mem*, u32);
SQLITE_PRIVATE u32 sqlite3VdbeSerialGet(const unsigned char*, u32, Mem*);
-SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe*, int, int);
+SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3*, AuxData**, int, int);
int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *);
SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*);
#else
SQLITE_PRIVATE void sqlite3VdbeMemSetDouble(Mem*, double);
#endif
+SQLITE_PRIVATE void sqlite3VdbeMemSetPointer(Mem*, void*, const char*, void(*)(void*));
SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem*,sqlite3*,u16);
SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem*);
SQLITE_PRIVATE void sqlite3VdbeMemSetZeroBlob(Mem*,int);
SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem*);
SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem*);
SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem*);
+SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem*, int ifNull);
SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem*);
SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*);
SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*);
SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem*,u8,u8);
-SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,int,Mem*);
+SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,Mem*);
SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p);
-#define VdbeMemDynamic(X) \
- (((X)->flags&(MEM_Agg|MEM_Dyn|MEM_RowSet|MEM_Frame))!=0)
SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*);
SQLITE_PRIVATE const char *sqlite3OpcodeName(int);
SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve);
SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int);
SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*);
SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+SQLITE_PRIVATE void sqlite3VdbePreUpdateHook(Vdbe*,VdbeCursor*,int,const char*,Table*,i64,int);
+#endif
SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p);
SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, int, VdbeCursor *);
SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *, VdbeSorter *);
SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *, VdbeCursor *);
SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *, Mem *);
-SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *, int *);
+SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *);
SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *, int *);
SQLITE_PRIVATE int sqlite3VdbeSorterWrite(const VdbeCursor *, Mem *);
SQLITE_PRIVATE int sqlite3VdbeSorterCompare(const VdbeCursor *, Mem *, int, int *);
-#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE>0
+#if !defined(SQLITE_OMIT_SHARED_CACHE)
SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeLeave(Vdbe*);
#else
# define sqlite3VdbeEnter(X)
+#endif
+
+#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE>0
+SQLITE_PRIVATE void sqlite3VdbeLeave(Vdbe*);
+#else
# define sqlite3VdbeLeave(X)
#endif
# define sqlite3VdbeCheckFk(p,i) 0
#endif
-SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem*, u8);
#ifdef SQLITE_DEBUG
SQLITE_PRIVATE void sqlite3VdbePrintSql(Vdbe*);
SQLITE_PRIVATE void sqlite3VdbeMemPrettyPrint(Mem *pMem, char *zBuf);
#endif
-SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem);
+#ifndef SQLITE_OMIT_UTF16
+SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem*, u8);
+SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem);
+#endif
#ifndef SQLITE_OMIT_INCRBLOB
SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *);
#define ExpandBlob(P) SQLITE_OK
#endif
-#endif /* !defined(_VDBEINT_H_) */
+#endif /* !defined(SQLITE_VDBEINT_H) */
/************** End of vdbeInt.h *********************************************/
/************** Continuing where we left off in status.c *********************/
/*
** Variables in which to record status information.
*/
-typedef struct sqlite3StatType sqlite3StatType;
-static SQLITE_WSD struct sqlite3StatType {
#if SQLITE_PTRSIZE>4
- sqlite3_int64 nowValue[10]; /* Current value */
- sqlite3_int64 mxValue[10]; /* Maximum value */
+typedef sqlite3_int64 sqlite3StatValueType;
#else
- u32 nowValue[10]; /* Current value */
- u32 mxValue[10]; /* Maximum value */
+typedef u32 sqlite3StatValueType;
#endif
+typedef struct sqlite3StatType sqlite3StatType;
+static SQLITE_WSD struct sqlite3StatType {
+ sqlite3StatValueType nowValue[10]; /* Current value */
+ sqlite3StatValueType mxValue[10]; /* Maximum value */
} sqlite3Stat = { {0,}, {0,} };
/*
}
/*
-** Set the value of a status to X. The highwater mark is adjusted if
-** necessary. The caller must hold the appropriate mutex.
+** Adjust the highwater mark if necessary.
+** The caller must hold the appropriate mutex.
*/
-SQLITE_PRIVATE void sqlite3StatusSet(int op, int X){
+SQLITE_PRIVATE void sqlite3StatusHighwater(int op, int X){
+ sqlite3StatValueType newValue;
wsdStatInit;
+ assert( X>=0 );
+ newValue = (sqlite3StatValueType)X;
assert( op>=0 && op<ArraySize(wsdStat.nowValue) );
assert( op>=0 && op<ArraySize(statMutex) );
assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex()
: sqlite3MallocMutex()) );
- wsdStat.nowValue[op] = X;
- if( wsdStat.nowValue[op]>wsdStat.mxValue[op] ){
- wsdStat.mxValue[op] = wsdStat.nowValue[op];
+ assert( op==SQLITE_STATUS_MALLOC_SIZE
+ || op==SQLITE_STATUS_PAGECACHE_SIZE
+ || op==SQLITE_STATUS_PARSER_STACK );
+ if( newValue>wsdStat.mxValue[op] ){
+ wsdStat.mxValue[op] = newValue;
}
}
/*
** Query status information.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status64(
int op,
sqlite3_int64 *pCurrent,
sqlite3_int64 *pHighwater,
(void)pMutex; /* Prevent warning when SQLITE_THREADSAFE=0 */
return SQLITE_OK;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
- sqlite3_int64 iCur, iHwtr;
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
+ sqlite3_int64 iCur = 0, iHwtr = 0;
int rc;
#ifdef SQLITE_ENABLE_API_ARMOR
if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
return rc;
}
+/*
+** Return the number of LookasideSlot elements on the linked list
+*/
+static u32 countLookasideSlots(LookasideSlot *p){
+ u32 cnt = 0;
+ while( p ){
+ p = p->pNext;
+ cnt++;
+ }
+ return cnt;
+}
+
+/*
+** Count the number of slots of lookaside memory that are outstanding
+*/
+SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3 *db, int *pHighwater){
+ u32 nInit = countLookasideSlots(db->lookaside.pInit);
+ u32 nFree = countLookasideSlots(db->lookaside.pFree);
+ if( pHighwater ) *pHighwater = db->lookaside.nSlot - nInit;
+ return db->lookaside.nSlot - (nInit+nFree);
+}
+
/*
** Query status information for a single database connection
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(
+SQLITE_API int sqlite3_db_status(
sqlite3 *db, /* The database connection whose status is desired */
int op, /* Status verb */
int *pCurrent, /* Write current value here */
sqlite3_mutex_enter(db->mutex);
switch( op ){
case SQLITE_DBSTATUS_LOOKASIDE_USED: {
- *pCurrent = db->lookaside.nOut;
- *pHighwater = db->lookaside.mxOut;
+ *pCurrent = sqlite3LookasideUsed(db, pHighwater);
if( resetFlag ){
- db->lookaside.mxOut = db->lookaside.nOut;
+ LookasideSlot *p = db->lookaside.pFree;
+ if( p ){
+ while( p->pNext ) p = p->pNext;
+ p->pNext = db->lookaside.pInit;
+ db->lookaside.pInit = db->lookaside.pFree;
+ db->lookaside.pFree = 0;
+ }
}
break;
}
** by all pagers associated with the given database connection. The
** highwater mark is meaningless and is returned as zero.
*/
+ case SQLITE_DBSTATUS_CACHE_USED_SHARED:
case SQLITE_DBSTATUS_CACHE_USED: {
int totalUsed = 0;
int i;
Btree *pBt = db->aDb[i].pBt;
if( pBt ){
Pager *pPager = sqlite3BtreePager(pBt);
- totalUsed += sqlite3PagerMemUsed(pPager);
+ int nByte = sqlite3PagerMemUsed(pPager);
+ if( op==SQLITE_DBSTATUS_CACHE_USED_SHARED ){
+ nByte = nByte / sqlite3BtreeConnectionCount(pBt);
+ }
+ totalUsed += nByte;
}
}
sqlite3BtreeLeaveAll(db);
+ pSchema->idxHash.count
+ pSchema->fkeyHash.count
);
- nByte += sqlite3MallocSize(pSchema->tblHash.ht);
- nByte += sqlite3MallocSize(pSchema->trigHash.ht);
- nByte += sqlite3MallocSize(pSchema->idxHash.ht);
- nByte += sqlite3MallocSize(pSchema->fkeyHash.ht);
+ nByte += sqlite3_msize(pSchema->tblHash.ht);
+ nByte += sqlite3_msize(pSchema->trigHash.ht);
+ nByte += sqlite3_msize(pSchema->idxHash.ht);
+ nByte += sqlite3_msize(pSchema->fkeyHash.ht);
for(p=sqliteHashFirst(&pSchema->trigHash); p; p=sqliteHashNext(p)){
sqlite3DeleteTrigger(db, (Trigger*)sqliteHashData(p));
** pagers the database handle is connected to. *pHighwater is always set
** to zero.
*/
+ case SQLITE_DBSTATUS_CACHE_SPILL:
+ op = SQLITE_DBSTATUS_CACHE_WRITE+1;
+ /* Fall through into the next case */
case SQLITE_DBSTATUS_CACHE_HIT:
case SQLITE_DBSTATUS_CACHE_MISS:
case SQLITE_DBSTATUS_CACHE_WRITE:{
**
** Jean Meeus
** Astronomical Algorithms, 2nd Edition, 1998
-** ISBM 0-943396-61-1
+** ISBN 0-943396-61-1
** Willmann-Bell, Inc
** Richmond, Virginia (USA)
*/
#ifndef SQLITE_OMIT_DATETIME_FUNCS
+/*
+** The MSVC CRT on Windows CE may not have a localtime() function.
+** So declare a substitute. The substitute function itself is
+** defined in "os_win.c".
+*/
+#if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
+ (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
+struct tm *__cdecl localtime(const time_t *);
+#endif
/*
** A structure for holding a single date and time.
*/
typedef struct DateTime DateTime;
struct DateTime {
- sqlite3_int64 iJD; /* The julian day number times 86400000 */
- int Y, M, D; /* Year, month, and day */
- int h, m; /* Hour and minutes */
- int tz; /* Timezone offset in minutes */
- double s; /* Seconds */
- char validYMD; /* True (1) if Y,M,D are valid */
- char validHMS; /* True (1) if h,m,s are valid */
- char validJD; /* True (1) if iJD is valid */
- char validTZ; /* True (1) if tz is valid */
+ sqlite3_int64 iJD; /* The julian day number times 86400000 */
+ int Y, M, D; /* Year, month, and day */
+ int h, m; /* Hour and minutes */
+ int tz; /* Timezone offset in minutes */
+ double s; /* Seconds */
+ char validJD; /* True (1) if iJD is valid */
+ char rawS; /* Raw numeric value stored in s */
+ char validYMD; /* True (1) if Y,M,D are valid */
+ char validHMS; /* True (1) if h,m,s are valid */
+ char validTZ; /* True (1) if tz is valid */
+ char tzSet; /* Timezone was set explicitly */
+ char isError; /* An overflow has occurred */
};
/*
-** Convert zDate into one or more integers. Additional arguments
-** come in groups of 5 as follows:
+** Convert zDate into one or more integers according to the conversion
+** specifier zFormat.
**
-** N number of digits in the integer
-** min minimum allowed value of the integer
-** max maximum allowed value of the integer
-** nextC first character after the integer
-** pVal where to write the integers value.
+** zFormat[] contains 4 characters for each integer converted, except for
+** the last integer which is specified by three characters. The meaning
+** of a four-character format specifiers ABCD is:
+**
+** A: number of digits to convert. Always "2" or "4".
+** B: minimum value. Always "0" or "1".
+** C: maximum value, decoded as:
+** a: 12
+** b: 14
+** c: 24
+** d: 31
+** e: 59
+** f: 9999
+** D: the separator character, or \000 to indicate this is the
+** last number to convert.
+**
+** Example: To translate an ISO-8601 date YYYY-MM-DD, the format would
+** be "40f-21a-20c". The "40f-" indicates the 4-digit year followed by "-".
+** The "21a-" indicates the 2-digit month followed by "-". The "20c" indicates
+** the 2-digit day which is the last integer in the set.
**
-** Conversions continue until one with nextC==0 is encountered.
** The function returns the number of successful conversions.
*/
-static int getDigits(const char *zDate, ...){
+static int getDigits(const char *zDate, const char *zFormat, ...){
+ /* The aMx[] array translates the 3rd character of each format
+ ** spec into a max size: a b c d e f */
+ static const u16 aMx[] = { 12, 14, 24, 31, 59, 9999 };
va_list ap;
- int val;
- int N;
- int min;
- int max;
- int nextC;
- int *pVal;
int cnt = 0;
- va_start(ap, zDate);
+ char nextC;
+ va_start(ap, zFormat);
do{
- N = va_arg(ap, int);
- min = va_arg(ap, int);
- max = va_arg(ap, int);
- nextC = va_arg(ap, int);
- pVal = va_arg(ap, int*);
+ char N = zFormat[0] - '0';
+ char min = zFormat[1] - '0';
+ int val = 0;
+ u16 max;
+
+ assert( zFormat[2]>='a' && zFormat[2]<='f' );
+ max = aMx[zFormat[2] - 'a'];
+ nextC = zFormat[3];
val = 0;
while( N-- ){
if( !sqlite3Isdigit(*zDate) ){
val = val*10 + *zDate - '0';
zDate++;
}
- if( val<min || val>max || (nextC!=0 && nextC!=*zDate) ){
+ if( val<(int)min || val>(int)max || (nextC!=0 && nextC!=*zDate) ){
goto end_getDigits;
}
- *pVal = val;
+ *va_arg(ap,int*) = val;
zDate++;
cnt++;
+ zFormat += 4;
}while( nextC );
end_getDigits:
va_end(ap);
return c!=0;
}
zDate++;
- if( getDigits(zDate, 2, 0, 14, ':', &nHr, 2, 0, 59, 0, &nMn)!=2 ){
+ if( getDigits(zDate, "20b:20e", &nHr, &nMn)!=2 ){
return 1;
}
zDate += 5;
p->tz = sgn*(nMn + nHr*60);
zulu_time:
while( sqlite3Isspace(*zDate) ){ zDate++; }
+ p->tzSet = 1;
return *zDate!=0;
}
static int parseHhMmSs(const char *zDate, DateTime *p){
int h, m, s;
double ms = 0.0;
- if( getDigits(zDate, 2, 0, 24, ':', &h, 2, 0, 59, 0, &m)!=2 ){
+ if( getDigits(zDate, "20c:20e", &h, &m)!=2 ){
return 1;
}
zDate += 5;
if( *zDate==':' ){
zDate++;
- if( getDigits(zDate, 2, 0, 59, 0, &s)!=1 ){
+ if( getDigits(zDate, "20e", &s)!=1 ){
return 1;
}
zDate += 2;
s = 0;
}
p->validJD = 0;
+ p->rawS = 0;
p->validHMS = 1;
p->h = h;
p->m = m;
return 0;
}
+/*
+** Put the DateTime object into its error state.
+*/
+static void datetimeError(DateTime *p){
+ memset(p, 0, sizeof(*p));
+ p->isError = 1;
+}
+
/*
** Convert from YYYY-MM-DD HH:MM:SS to julian day. We always assume
** that the YYYY-MM-DD is according to the Gregorian calendar.
M = 1;
D = 1;
}
+ if( Y<-4713 || Y>9999 || p->rawS ){
+ datetimeError(p);
+ return;
+ }
if( M<=2 ){
Y--;
M += 12;
}else{
neg = 0;
}
- if( getDigits(zDate,4,0,9999,'-',&Y,2,1,12,'-',&M,2,1,31,0,&D)!=3 ){
+ if( getDigits(zDate, "40f-21a-21d", &Y, &M, &D)!=3 ){
return 1;
}
zDate += 10;
}
}
+/*
+** Input "r" is a numeric quantity which might be a julian day number,
+** or the number of seconds since 1970. If the value if r is within
+** range of a julian day number, install it as such and set validJD.
+** If the value is a valid unix timestamp, put it in p->s and set p->rawS.
+*/
+static void setRawDateNumber(DateTime *p, double r){
+ p->s = r;
+ p->rawS = 1;
+ if( r>=0.0 && r<5373484.5 ){
+ p->iJD = (sqlite3_int64)(r*86400000.0 + 0.5);
+ p->validJD = 1;
+ }
+}
+
/*
** Attempt to parse the given string into a julian day number. Return
** the number of errors.
return 0;
}else if( parseHhMmSs(zDate, p)==0 ){
return 0;
- }else if( sqlite3StrICmp(zDate,"now")==0){
+ }else if( sqlite3StrICmp(zDate,"now")==0 && sqlite3NotPureFunc(context) ){
return setDateTimeToCurrent(context, p);
}else if( sqlite3AtoF(zDate, &r, sqlite3Strlen30(zDate), SQLITE_UTF8) ){
- p->iJD = (sqlite3_int64)(r*86400000.0 + 0.5);
- p->validJD = 1;
+ setRawDateNumber(p, r);
return 0;
}
return 1;
}
+/* The julian day number for 9999-12-31 23:59:59.999 is 5373484.4999999.
+** Multiplying this by 86400000 gives 464269060799999 as the maximum value
+** for DateTime.iJD.
+**
+** But some older compilers (ex: gcc 4.2.1 on older Macs) cannot deal with
+** such a large integer literal, so we have to encode it.
+*/
+#define INT_464269060799999 ((((i64)0x1a640)<<32)|0x1072fdff)
+
+/*
+** Return TRUE if the given julian day number is within range.
+**
+** The input is the JulianDay times 86400000.
+*/
+static int validJulianDay(sqlite3_int64 iJD){
+ return iJD>=0 && iJD<=INT_464269060799999;
+}
+
/*
** Compute the Year, Month, and Day from the julian day number.
*/
p->Y = 2000;
p->M = 1;
p->D = 1;
+ }else if( !validJulianDay(p->iJD) ){
+ datetimeError(p);
+ return;
}else{
Z = (int)((p->iJD + 43200000)/86400000);
A = (int)((Z - 1867216.25)/36524.25);
s -= p->h*3600;
p->m = s/60;
p->s += s - p->m*60;
+ p->rawS = 0;
p->validHMS = 1;
}
p->validTZ = 0;
}
+#ifndef SQLITE_OMIT_LOCALTIME
/*
** On recent Windows platforms, the localtime_s() function is available
** as part of the "Secure CRT". It is essentially equivalent to
#define HAVE_LOCALTIME_S 1
#endif
-#ifndef SQLITE_OMIT_LOCALTIME
/*
** The following routine implements the rough equivalent of localtime_r()
** using whatever operating-system specific localtime facility that
#endif
sqlite3_mutex_enter(mutex);
pX = localtime(t);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
if( sqlite3GlobalConfig.bLocaltimeFault ) pX = 0;
#endif
if( pX ) *pTm = *pX;
sqlite3_mutex_leave(mutex);
rc = pX==0;
#else
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
if( sqlite3GlobalConfig.bLocaltimeFault ) return 1;
#endif
#if HAVE_LOCALTIME_R
y.validYMD = 1;
y.validHMS = 1;
y.validJD = 0;
+ y.rawS = 0;
y.validTZ = 0;
+ y.isError = 0;
computeJD(&y);
*pRc = SQLITE_OK;
return y.iJD - x.iJD;
}
#endif /* SQLITE_OMIT_LOCALTIME */
+/*
+** The following table defines various date transformations of the form
+**
+** 'NNN days'
+**
+** Where NNN is an arbitrary floating-point number and "days" can be one
+** of several units of time.
+*/
+static const struct {
+ u8 eType; /* Transformation type code */
+ u8 nName; /* Length of th name */
+ char *zName; /* Name of the transformation */
+ double rLimit; /* Maximum NNN value for this transform */
+ double rXform; /* Constant used for this transform */
+} aXformType[] = {
+ { 0, 6, "second", 464269060800.0, 86400000.0/(24.0*60.0*60.0) },
+ { 0, 6, "minute", 7737817680.0, 86400000.0/(24.0*60.0) },
+ { 0, 4, "hour", 128963628.0, 86400000.0/24.0 },
+ { 0, 3, "day", 5373485.0, 86400000.0 },
+ { 1, 5, "month", 176546.0, 30.0*86400000.0 },
+ { 2, 4, "year", 14713.0, 365.0*86400000.0 },
+};
+
/*
** Process a modifier to a date-time stamp. The modifiers are
** as follows:
** to context pCtx. If the error is an unrecognized modifier, no error is
** written to pCtx.
*/
-static int parseModifier(sqlite3_context *pCtx, const char *zMod, DateTime *p){
+static int parseModifier(
+ sqlite3_context *pCtx, /* Function context */
+ const char *z, /* The text of the modifier */
+ int n, /* Length of zMod in bytes */
+ DateTime *p /* The date/time value to be modified */
+){
int rc = 1;
- int n;
double r;
- char *z, zBuf[30];
- z = zBuf;
- for(n=0; n<ArraySize(zBuf)-1 && zMod[n]; n++){
- z[n] = (char)sqlite3UpperToLower[(u8)zMod[n]];
- }
- z[n] = 0;
- switch( z[0] ){
+ switch(sqlite3UpperToLower[(u8)z[0]] ){
#ifndef SQLITE_OMIT_LOCALTIME
case 'l': {
/* localtime
** Assuming the current time value is UTC (a.k.a. GMT), shift it to
** show local time.
*/
- if( strcmp(z, "localtime")==0 ){
+ if( sqlite3_stricmp(z, "localtime")==0 && sqlite3NotPureFunc(pCtx) ){
computeJD(p);
p->iJD += localtimeOffset(p, pCtx, &rc);
clearYMD_HMS_TZ(p);
/*
** unixepoch
**
- ** Treat the current value of p->iJD as the number of
+ ** Treat the current value of p->s as the number of
** seconds since 1970. Convert to a real julian day number.
*/
- if( strcmp(z, "unixepoch")==0 && p->validJD ){
- p->iJD = (p->iJD + 43200)/86400 + 21086676*(i64)10000000;
- clearYMD_HMS_TZ(p);
- rc = 0;
+ if( sqlite3_stricmp(z, "unixepoch")==0 && p->rawS ){
+ r = p->s*1000.0 + 210866760000000.0;
+ if( r>=0.0 && r<464269060800000.0 ){
+ clearYMD_HMS_TZ(p);
+ p->iJD = (sqlite3_int64)r;
+ p->validJD = 1;
+ p->rawS = 0;
+ rc = 0;
+ }
}
#ifndef SQLITE_OMIT_LOCALTIME
- else if( strcmp(z, "utc")==0 ){
- sqlite3_int64 c1;
- computeJD(p);
- c1 = localtimeOffset(p, pCtx, &rc);
- if( rc==SQLITE_OK ){
- p->iJD -= c1;
- clearYMD_HMS_TZ(p);
- p->iJD += c1 - localtimeOffset(p, pCtx, &rc);
+ else if( sqlite3_stricmp(z, "utc")==0 && sqlite3NotPureFunc(pCtx) ){
+ if( p->tzSet==0 ){
+ sqlite3_int64 c1;
+ computeJD(p);
+ c1 = localtimeOffset(p, pCtx, &rc);
+ if( rc==SQLITE_OK ){
+ p->iJD -= c1;
+ clearYMD_HMS_TZ(p);
+ p->iJD += c1 - localtimeOffset(p, pCtx, &rc);
+ }
+ p->tzSet = 1;
+ }else{
+ rc = SQLITE_OK;
}
}
#endif
** weekday N where 0==Sunday, 1==Monday, and so forth. If the
** date is already on the appropriate weekday, this is a no-op.
*/
- if( strncmp(z, "weekday ", 8)==0
+ if( sqlite3_strnicmp(z, "weekday ", 8)==0
&& sqlite3AtoF(&z[8], &r, sqlite3Strlen30(&z[8]), SQLITE_UTF8)
&& (n=(int)r)==r && n>=0 && r<7 ){
sqlite3_int64 Z;
** Move the date backwards to the beginning of the current day,
** or month or year.
*/
- if( strncmp(z, "start of ", 9)!=0 ) break;
+ if( sqlite3_strnicmp(z, "start of ", 9)!=0 ) break;
+ if( !p->validJD && !p->validYMD && !p->validHMS ) break;
z += 9;
computeYMD(p);
p->validHMS = 1;
p->h = p->m = 0;
p->s = 0.0;
+ p->rawS = 0;
p->validTZ = 0;
p->validJD = 0;
- if( strcmp(z,"month")==0 ){
+ if( sqlite3_stricmp(z,"month")==0 ){
p->D = 1;
rc = 0;
- }else if( strcmp(z,"year")==0 ){
- computeYMD(p);
+ }else if( sqlite3_stricmp(z,"year")==0 ){
p->M = 1;
p->D = 1;
rc = 0;
- }else if( strcmp(z,"day")==0 ){
+ }else if( sqlite3_stricmp(z,"day")==0 ){
rc = 0;
}
break;
case '8':
case '9': {
double rRounder;
+ int i;
for(n=1; z[n] && z[n]!=':' && !sqlite3Isspace(z[n]); n++){}
if( !sqlite3AtoF(z, &r, n, SQLITE_UTF8) ){
rc = 1;
rc = 0;
break;
}
+
+ /* If control reaches this point, it means the transformation is
+ ** one of the forms like "+NNN days". */
z += n;
while( sqlite3Isspace(*z) ) z++;
n = sqlite3Strlen30(z);
if( n>10 || n<3 ) break;
- if( z[n-1]=='s' ){ z[n-1] = 0; n--; }
+ if( sqlite3UpperToLower[(u8)z[n-1]]=='s' ) n--;
computeJD(p);
- rc = 0;
+ rc = 1;
rRounder = r<0 ? -0.5 : +0.5;
- if( n==3 && strcmp(z,"day")==0 ){
- p->iJD += (sqlite3_int64)(r*86400000.0 + rRounder);
- }else if( n==4 && strcmp(z,"hour")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/24.0) + rRounder);
- }else if( n==6 && strcmp(z,"minute")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0)) + rRounder);
- }else if( n==6 && strcmp(z,"second")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0*60.0)) + rRounder);
- }else if( n==5 && strcmp(z,"month")==0 ){
- int x, y;
- computeYMD_HMS(p);
- p->M += (int)r;
- x = p->M>0 ? (p->M-1)/12 : (p->M-12)/12;
- p->Y += x;
- p->M -= x*12;
- p->validJD = 0;
- computeJD(p);
- y = (int)r;
- if( y!=r ){
- p->iJD += (sqlite3_int64)((r - y)*30.0*86400000.0 + rRounder);
- }
- }else if( n==4 && strcmp(z,"year")==0 ){
- int y = (int)r;
- computeYMD_HMS(p);
- p->Y += y;
- p->validJD = 0;
- computeJD(p);
- if( y!=r ){
- p->iJD += (sqlite3_int64)((r - y)*365.0*86400000.0 + rRounder);
+ for(i=0; i<ArraySize(aXformType); i++){
+ if( aXformType[i].nName==n
+ && sqlite3_strnicmp(aXformType[i].zName, z, n)==0
+ && r>-aXformType[i].rLimit && r<aXformType[i].rLimit
+ ){
+ switch( aXformType[i].eType ){
+ case 1: { /* Special processing to add months */
+ int x;
+ computeYMD_HMS(p);
+ p->M += (int)r;
+ x = p->M>0 ? (p->M-1)/12 : (p->M-12)/12;
+ p->Y += x;
+ p->M -= x*12;
+ p->validJD = 0;
+ r -= (int)r;
+ break;
+ }
+ case 2: { /* Special processing to add years */
+ int y = (int)r;
+ computeYMD_HMS(p);
+ p->Y += y;
+ p->validJD = 0;
+ r -= (int)r;
+ break;
+ }
+ }
+ computeJD(p);
+ p->iJD += (sqlite3_int64)(r*aXformType[i].rXform + rRounder);
+ rc = 0;
+ break;
}
- }else{
- rc = 1;
}
clearYMD_HMS_TZ(p);
break;
sqlite3_value **argv,
DateTime *p
){
- int i;
+ int i, n;
const unsigned char *z;
int eType;
memset(p, 0, sizeof(*p));
}
if( (eType = sqlite3_value_type(argv[0]))==SQLITE_FLOAT
|| eType==SQLITE_INTEGER ){
- p->iJD = (sqlite3_int64)(sqlite3_value_double(argv[0])*86400000.0 + 0.5);
- p->validJD = 1;
+ setRawDateNumber(p, sqlite3_value_double(argv[0]));
}else{
z = sqlite3_value_text(argv[0]);
if( !z || parseDateOrTime(context, (char*)z, p) ){
}
for(i=1; i<argc; i++){
z = sqlite3_value_text(argv[i]);
- if( z==0 || parseModifier(context, (char*)z, p) ) return 1;
+ n = sqlite3_value_bytes(argv[i]);
+ if( z==0 || parseModifier(context, (char*)z, n, p) ) return 1;
}
+ computeJD(p);
+ if( p->isError || !validJulianDay(p->iJD) ) return 1;
return 0;
}
sqlite3_result_error_toobig(context);
return;
}else{
- z = sqlite3DbMallocRaw(db, (int)n);
+ z = sqlite3DbMallocRawNN(db, (int)n);
if( z==0 ){
sqlite3_result_error_nomem(context);
return;
){
time_t t;
char *zFormat = (char *)sqlite3_user_data(context);
- sqlite3 *db;
sqlite3_int64 iT;
struct tm *pTm;
struct tm sNow;
** external linkage.
*/
SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void){
- static SQLITE_WSD FuncDef aDateTimeFuncs[] = {
+ static FuncDef aDateTimeFuncs[] = {
#ifndef SQLITE_OMIT_DATETIME_FUNCS
- DFUNCTION(julianday, -1, 0, 0, juliandayFunc ),
- DFUNCTION(date, -1, 0, 0, dateFunc ),
- DFUNCTION(time, -1, 0, 0, timeFunc ),
- DFUNCTION(datetime, -1, 0, 0, datetimeFunc ),
- DFUNCTION(strftime, -1, 0, 0, strftimeFunc ),
+ PURE_DATE(julianday, -1, 0, 0, juliandayFunc ),
+ PURE_DATE(date, -1, 0, 0, dateFunc ),
+ PURE_DATE(time, -1, 0, 0, timeFunc ),
+ PURE_DATE(datetime, -1, 0, 0, datetimeFunc ),
+ PURE_DATE(strftime, -1, 0, 0, strftimeFunc ),
DFUNCTION(current_time, 0, 0, 0, ctimeFunc ),
DFUNCTION(current_timestamp, 0, 0, 0, ctimestampFunc),
DFUNCTION(current_date, 0, 0, 0, cdateFunc ),
STR_FUNCTION(current_timestamp, 0, "%Y-%m-%d %H:%M:%S", 0, currentTimeFunc),
#endif
};
- int i;
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
- FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aDateTimeFuncs);
-
- for(i=0; i<ArraySize(aDateTimeFuncs); i++){
- sqlite3FuncDefInsert(pHash, &aFunc[i]);
- }
+ sqlite3InsertBuiltinFuncs(aDateTimeFuncs, ArraySize(aDateTimeFuncs));
}
/************** End of date.c ************************************************/
** This file contains OS interface code that is common to all
** architectures.
*/
-#define _SQLITE_OS_C_ 1
/* #include "sqliteInt.h" */
-#undef _SQLITE_OS_C_
+
+/*
+** If we compile with the SQLITE_TEST macro set, then the following block
+** of code will give us the ability to simulate a disk I/O error. This
+** is used for testing the I/O recovery logic.
+*/
+#if defined(SQLITE_TEST)
+SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */
+SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */
+SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */
+SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */
+SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */
+SQLITE_API int sqlite3_diskfull_pending = 0;
+SQLITE_API int sqlite3_diskfull = 0;
+#endif /* defined(SQLITE_TEST) */
+
+/*
+** When testing, also keep a count of the number of open files.
+*/
+#if defined(SQLITE_TEST)
+SQLITE_API int sqlite3_open_file_count = 0;
+#endif /* defined(SQLITE_TEST) */
/*
** The default SQLite sqlite3_vfs implementations do not allocate
** So we test the effects of a malloc() failing and the sqlite3OsXXX()
** function returning SQLITE_IOERR_NOMEM using the DO_OS_MALLOC_TEST macro.
**
-** The following functions are instrumented for malloc() failure
+** The following functions are instrumented for malloc() failure
** testing:
**
** sqlite3OsRead()
#if defined(SQLITE_TEST)
SQLITE_API int sqlite3_memdebug_vfs_oom_test = 1;
#define DO_OS_MALLOC_TEST(x) \
- if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3IsMemJournal(x))) { \
+ if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3JournalIsInMemory(x))) { \
void *pTstAlloc = sqlite3Malloc(10); \
- if (!pTstAlloc) return SQLITE_IOERR_NOMEM; \
+ if (!pTstAlloc) return SQLITE_IOERR_NOMEM_BKPT; \
sqlite3_free(pTstAlloc); \
}
#else
** of this would be completely automatic if SQLite were coded using
** C++ instead of plain old C.
*/
-SQLITE_PRIVATE int sqlite3OsClose(sqlite3_file *pId){
- int rc = SQLITE_OK;
+SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file *pId){
if( pId->pMethods ){
- rc = pId->pMethods->xClose(pId);
+ pId->pMethods->xClose(pId);
pId->pMethods = 0;
}
- return rc;
}
SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file *id, void *pBuf, int amt, i64 offset){
DO_OS_MALLOC_TEST(id);
}
SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file *id, int flags){
DO_OS_MALLOC_TEST(id);
- return id->pMethods->xSync(id, flags);
+ return flags ? id->pMethods->xSync(id, flags) : SQLITE_OK;
}
SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file *id, i64 *pSize){
DO_OS_MALLOC_TEST(id);
*/
SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file *id, int op, void *pArg){
#ifdef SQLITE_TEST
- if( op!=SQLITE_FCNTL_COMMIT_PHASETWO ){
+ if( op!=SQLITE_FCNTL_COMMIT_PHASETWO
+ && op!=SQLITE_FCNTL_LOCK_TIMEOUT
+ ){
/* Faults are not injected into COMMIT_PHASETWO because, assuming SQLite
- ** is using a regular VFS, it is called after the corresponding
- ** transaction has been committed. Injecting a fault at this point
+ ** is using a regular VFS, it is called after the corresponding
+ ** transaction has been committed. Injecting a fault at this point
** confuses the test scripts - the COMMIT comand returns SQLITE_NOMEM
** but the transaction is committed anyway.
**
DO_OS_MALLOC_TEST(id);
}
#endif
+ if( id->pMethods==0 ) return SQLITE_NOTFOUND;
return id->pMethods->xFileControl(id, op, pArg);
}
SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file *id, int op, void *pArg){
- (void)id->pMethods->xFileControl(id, op, pArg);
+ if( id->pMethods ) (void)id->pMethods->xFileControl(id, op, pArg);
}
SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id){
SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id){
return id->pMethods->xDeviceCharacteristics(id);
}
+#ifndef SQLITE_OMIT_WAL
SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int offset, int n, int flags){
return id->pMethods->xShmLock(id, offset, n, flags);
}
DO_OS_MALLOC_TEST(id);
return id->pMethods->xShmMap(id, iPage, pgsz, bExtend, pp);
}
+#endif /* SQLITE_OMIT_WAL */
#if SQLITE_MAX_MMAP_SIZE>0
/* The real implementation of xFetch and xUnfetch */
** VFS methods.
*/
SQLITE_PRIVATE int sqlite3OsOpen(
- sqlite3_vfs *pVfs,
- const char *zPath,
- sqlite3_file *pFile,
- int flags,
+ sqlite3_vfs *pVfs,
+ const char *zPath,
+ sqlite3_file *pFile,
+ int flags,
int *pFlagsOut
){
int rc;
return pVfs->xDelete(pVfs, zPath, dirSync);
}
SQLITE_PRIVATE int sqlite3OsAccess(
- sqlite3_vfs *pVfs,
- const char *zPath,
- int flags,
+ sqlite3_vfs *pVfs,
+ const char *zPath,
+ int flags,
int *pResOut
){
DO_OS_MALLOC_TEST(0);
return pVfs->xAccess(pVfs, zPath, flags, pResOut);
}
SQLITE_PRIVATE int sqlite3OsFullPathname(
- sqlite3_vfs *pVfs,
- const char *zPath,
- int nPathOut,
+ sqlite3_vfs *pVfs,
+ const char *zPath,
+ int nPathOut,
char *zPathOut
){
DO_OS_MALLOC_TEST(0);
SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *pVfs, int nMicro){
return pVfs->xSleep(pVfs, nMicro);
}
+SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs *pVfs){
+ return pVfs->xGetLastError ? pVfs->xGetLastError(pVfs, 0, 0) : 0;
+}
SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){
int rc;
/* IMPLEMENTATION-OF: R-49045-42493 SQLite will use the xCurrentTimeInt64()
}
SQLITE_PRIVATE int sqlite3OsOpenMalloc(
- sqlite3_vfs *pVfs,
- const char *zFile,
- sqlite3_file **ppFile,
+ sqlite3_vfs *pVfs,
+ const char *zFile,
+ sqlite3_file **ppFile,
int flags,
int *pOutFlags
){
- int rc = SQLITE_NOMEM;
+ int rc;
sqlite3_file *pFile;
pFile = (sqlite3_file *)sqlite3MallocZero(pVfs->szOsFile);
if( pFile ){
}else{
*ppFile = pFile;
}
+ }else{
+ rc = SQLITE_NOMEM_BKPT;
}
return rc;
}
-SQLITE_PRIVATE int sqlite3OsCloseFree(sqlite3_file *pFile){
- int rc = SQLITE_OK;
+SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *pFile){
assert( pFile );
- rc = sqlite3OsClose(pFile);
+ sqlite3OsClose(pFile);
sqlite3_free(pFile);
- return rc;
}
/*
*/
SQLITE_PRIVATE int sqlite3OsInit(void){
void *p = sqlite3_malloc(10);
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
sqlite3_free(p);
return sqlite3_os_init();
}
** Locate a VFS by name. If no name is given, simply return the
** first VFS on the list.
*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfs){
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfs){
sqlite3_vfs *pVfs = 0;
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex;
** VFS multiple times. The new VFS becomes the default if makeDflt is
** true.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
MUTEX_LOGIC(sqlite3_mutex *mutex;)
#ifndef SQLITE_OMIT_AUTOINIT
int rc = sqlite3_initialize();
/*
** Unregister a VFS so that it is no longer accessible.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
#endif
/* #include "sqliteInt.h" */
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
/*
** Global variables.
}
}
-#endif /* #ifndef SQLITE_OMIT_BUILTIN_TEST */
+#endif /* #ifndef SQLITE_UNTESTABLE */
/************** End of fault.c ***********************************************/
/************** Begin file mem0.c ********************************************/
*/
#include <sys/sysctl.h>
#include <malloc/malloc.h>
+#ifdef SQLITE_MIGHT_BE_SINGLE_CORE
#include <libkern/OSAtomic.h>
+#endif /* SQLITE_MIGHT_BE_SINGLE_CORE */
static malloc_zone_t* _sqliteZone_;
#define SQLITE_MALLOC(x) malloc_zone_malloc(_sqliteZone_, (x))
#define SQLITE_FREE(x) malloc_zone_free(_sqliteZone_, (x));
*/
static void *sqlite3MemMalloc(int nByte){
#ifdef SQLITE_MALLOCSIZE
- void *p = SQLITE_MALLOC( nByte );
+ void *p;
+ testcase( ROUND8(nByte)==nByte );
+ p = SQLITE_MALLOC( nByte );
if( p==0 ){
testcase( sqlite3GlobalConfig.xLog!=0 );
sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes of memory", nByte);
#else
sqlite3_int64 *p;
assert( nByte>0 );
- nByte = ROUND8(nByte);
+ testcase( ROUND8(nByte)!=nByte );
p = SQLITE_MALLOC( nByte+8 );
if( p ){
p[0] = nByte;
*/
static int sqlite3MemSize(void *pPrior){
#ifdef SQLITE_MALLOCSIZE
- return pPrior ? (int)SQLITE_MALLOCSIZE(pPrior) : 0;
+ assert( pPrior!=0 );
+ return (int)SQLITE_MALLOCSIZE(pPrior);
#else
sqlite3_int64 *p;
- if( pPrior==0 ) return 0;
+ assert( pPrior!=0 );
p = (sqlite3_int64*)pPrior;
p--;
return (int)p[0];
}else{
/* only 1 core, use our own zone to contention over global locks,
** e.g. we have our own dedicated locks */
- bool success;
- malloc_zone_t* newzone = malloc_create_zone(4096, 0);
- malloc_set_zone_name(newzone, "Sqlite_Heap");
- do{
- success = OSAtomicCompareAndSwapPtrBarrier(NULL, newzone,
- (void * volatile *)&_sqliteZone_);
- }while(!_sqliteZone_);
- if( !success ){
- /* somebody registered a zone first */
- malloc_destroy_zone(newzone);
- }
+ _sqliteZone_ = malloc_create_zone(4096, 0);
+ malloc_set_zone_name(_sqliteZone_, "Sqlite_Heap");
}
-#endif
+#endif /* defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC) */
UNUSED_PARAMETER(NotUsed);
return SQLITE_OK;
}
*/
static int memsys3Size(void *p){
Mem3Block *pBlock;
- if( p==0 ) return 0;
+ assert( p!=0 );
pBlock = (Mem3Block*)p;
assert( (pBlock[-1].u.hdr.size4x&1)!=0 );
return (pBlock[-1].u.hdr.size4x&~3)*2 - 4;
**
** This memory allocator uses the following algorithm:
**
-** 1. All memory allocations sizes are rounded up to a power of 2.
+** 1. All memory allocation sizes are rounded up to a power of 2.
**
** 2. If two adjacent free blocks are the halves of a larger block,
** then the two blocks are coalesced into the single larger block.
*/
sqlite3_mutex *mutex;
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Performance statistics
*/
u32 maxOut; /* Maximum instantaneous currentOut */
u32 maxCount; /* Maximum instantaneous currentCount */
u32 maxRequest; /* Largest allocation (exclusive of internal frag) */
+#endif
/*
** Lists of free blocks. aiFreelist[0] is a list of free blocks of
** size mem5.szAtom. aiFreelist[1] holds blocks of size szAtom*2.
- ** and so forth.
+ ** aiFreelist[2] holds free blocks of size szAtom*4. And so forth.
*/
int aiFreelist[LOGMAX+1];
}
/*
-** If the STATIC_MEM mutex is not already held, obtain it now. The mutex
-** will already be held (obtained by code in malloc.c) if
-** sqlite3GlobalConfig.bMemStat is true.
+** Obtain or release the mutex needed to access global data structures.
*/
static void memsys5Enter(void){
sqlite3_mutex_enter(mem5.mutex);
}
/*
-** Return the size of an outstanding allocation, in bytes. The
-** size returned omits the 8-byte header overhead. This only
-** works for chunks that are currently checked out.
+** Return the size of an outstanding allocation, in bytes.
+** This only works for chunks that are currently checked out.
*/
static int memsys5Size(void *p){
- int iSize = 0;
- if( p ){
- int i = (int)(((u8 *)p-mem5.zPool)/mem5.szAtom);
- assert( i>=0 && i<mem5.nBlock );
- iSize = mem5.szAtom * (1 << (mem5.aCtrl[i]&CTRL_LOGSIZE));
- }
+ int iSize, i;
+ assert( p!=0 );
+ i = (int)(((u8 *)p-mem5.zPool)/mem5.szAtom);
+ assert( i>=0 && i<mem5.nBlock );
+ iSize = mem5.szAtom * (1 << (mem5.aCtrl[i]&CTRL_LOGSIZE));
return iSize;
}
/* nByte must be a positive */
assert( nByte>0 );
+ /* No more than 1GiB per allocation */
+ if( nByte > 0x40000000 ) return 0;
+
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/* Keep track of the maximum allocation request. Even unfulfilled
** requests are counted */
if( (u32)nByte>mem5.maxRequest ){
mem5.maxRequest = nByte;
}
+#endif
- /* Abort if the requested allocation size is larger than the largest
- ** power of two that we can represent using 32-bit signed integers.
- */
- if( nByte > 0x40000000 ){
- return 0;
- }
/* Round nByte up to the next valid power of two */
- for(iFullSz=mem5.szAtom, iLogsize=0; iFullSz<nByte; iFullSz *= 2, iLogsize++){}
+ for(iFullSz=mem5.szAtom,iLogsize=0; iFullSz<nByte; iFullSz*=2,iLogsize++){}
/* Make sure mem5.aiFreelist[iLogsize] contains at least one free
** block. If not, then split a block of the next larger power of
}
mem5.aCtrl[i] = iLogsize;
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/* Update allocator performance statistics. */
mem5.nAlloc++;
mem5.totalAlloc += iFullSz;
mem5.currentOut += iFullSz;
if( mem5.maxCount<mem5.currentCount ) mem5.maxCount = mem5.currentCount;
if( mem5.maxOut<mem5.currentOut ) mem5.maxOut = mem5.currentOut;
+#endif
#ifdef SQLITE_DEBUG
/* Make sure the allocated memory does not assume that it is set to zero
mem5.aCtrl[iBlock] |= CTRL_FREE;
mem5.aCtrl[iBlock+size-1] |= CTRL_FREE;
+
+#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
assert( mem5.currentCount>0 );
assert( mem5.currentOut>=(size*mem5.szAtom) );
mem5.currentCount--;
mem5.currentOut -= size*mem5.szAtom;
assert( mem5.currentOut>0 || mem5.currentCount==0 );
assert( mem5.currentCount>0 || mem5.currentOut==0 );
+#endif
mem5.aCtrl[iBlock] = CTRL_FREE | iLogsize;
while( ALWAYS(iLogsize<LOGMAX) ){
int iBuddy;
if( (iBlock>>iLogsize) & 1 ){
iBuddy = iBlock - size;
+ assert( iBuddy>=0 );
}else{
iBuddy = iBlock + size;
+ if( iBuddy>=mem5.nBlock ) break;
}
- assert( iBuddy>=0 );
- if( (iBuddy+(1<<iLogsize))>mem5.nBlock ) break;
if( mem5.aCtrl[iBuddy]!=(CTRL_FREE | iLogsize) ) break;
memsys5Unlink(iBuddy, iLogsize);
iLogsize++;
if( nBytes<=nOld ){
return pPrior;
}
- memsys5Enter();
- p = memsys5MallocUnsafe(nBytes);
+ p = memsys5Malloc(nBytes);
if( p ){
memcpy(p, pPrior, nOld);
- memsys5FreeUnsafe(pPrior);
+ memsys5Free(pPrior);
}
- memsys5Leave();
return p;
}
#ifndef SQLITE_MUTEX_OMIT
+
+#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS
+/*
+** This block (enclosed by SQLITE_ENABLE_MULTITHREADED_CHECKS) contains
+** the implementation of a wrapper around the system default mutex
+** implementation (sqlite3DefaultMutex()).
+**
+** Most calls are passed directly through to the underlying default
+** mutex implementation. Except, if a mutex is configured by calling
+** sqlite3MutexWarnOnContention() on it, then if contention is ever
+** encountered within xMutexEnter() a warning is emitted via sqlite3_log().
+**
+** This type of mutex is used as the database handle mutex when testing
+** apps that usually use SQLITE_CONFIG_MULTITHREAD mode.
+*/
+
+/*
+** Type for all mutexes used when SQLITE_ENABLE_MULTITHREADED_CHECKS
+** is defined. Variable CheckMutex.mutex is a pointer to the real mutex
+** allocated by the system mutex implementation. Variable iType is usually set
+** to the type of mutex requested - SQLITE_MUTEX_RECURSIVE, SQLITE_MUTEX_FAST
+** or one of the static mutex identifiers. Or, if this is a recursive mutex
+** that has been configured using sqlite3MutexWarnOnContention(), it is
+** set to SQLITE_MUTEX_WARNONCONTENTION.
+*/
+typedef struct CheckMutex CheckMutex;
+struct CheckMutex {
+ int iType;
+ sqlite3_mutex *mutex;
+};
+
+#define SQLITE_MUTEX_WARNONCONTENTION (-1)
+
+/*
+** Pointer to real mutex methods object used by the CheckMutex
+** implementation. Set by checkMutexInit().
+*/
+static SQLITE_WSD const sqlite3_mutex_methods *pGlobalMutexMethods;
+
+#ifdef SQLITE_DEBUG
+static int checkMutexHeld(sqlite3_mutex *p){
+ return pGlobalMutexMethods->xMutexHeld(((CheckMutex*)p)->mutex);
+}
+static int checkMutexNotheld(sqlite3_mutex *p){
+ return pGlobalMutexMethods->xMutexNotheld(((CheckMutex*)p)->mutex);
+}
+#endif
+
+/*
+** Initialize and deinitialize the mutex subsystem.
+*/
+static int checkMutexInit(void){
+ pGlobalMutexMethods = sqlite3DefaultMutex();
+ return SQLITE_OK;
+}
+static int checkMutexEnd(void){
+ pGlobalMutexMethods = 0;
+ return SQLITE_OK;
+}
+
+/*
+** Allocate a mutex.
+*/
+static sqlite3_mutex *checkMutexAlloc(int iType){
+ static CheckMutex staticMutexes[] = {
+ {2, 0}, {3, 0}, {4, 0}, {5, 0},
+ {6, 0}, {7, 0}, {8, 0}, {9, 0},
+ {10, 0}, {11, 0}, {12, 0}, {13, 0}
+ };
+ CheckMutex *p = 0;
+
+ assert( SQLITE_MUTEX_RECURSIVE==1 && SQLITE_MUTEX_FAST==0 );
+ if( iType<2 ){
+ p = sqlite3MallocZero(sizeof(CheckMutex));
+ if( p==0 ) return 0;
+ p->iType = iType;
+ }else{
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( iType-2>=ArraySize(staticMutexes) ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+ p = &staticMutexes[iType-2];
+ }
+
+ if( p->mutex==0 ){
+ p->mutex = pGlobalMutexMethods->xMutexAlloc(iType);
+ if( p->mutex==0 ){
+ if( iType<2 ){
+ sqlite3_free(p);
+ }
+ p = 0;
+ }
+ }
+
+ return (sqlite3_mutex*)p;
+}
+
+/*
+** Free a mutex.
+*/
+static void checkMutexFree(sqlite3_mutex *p){
+ assert( SQLITE_MUTEX_RECURSIVE<2 );
+ assert( SQLITE_MUTEX_FAST<2 );
+ assert( SQLITE_MUTEX_WARNONCONTENTION<2 );
+
+#if SQLITE_ENABLE_API_ARMOR
+ if( ((CheckMutex*)p)->iType<2 )
+#endif
+ {
+ CheckMutex *pCheck = (CheckMutex*)p;
+ pGlobalMutexMethods->xMutexFree(pCheck->mutex);
+ sqlite3_free(pCheck);
+ }
+#ifdef SQLITE_ENABLE_API_ARMOR
+ else{
+ (void)SQLITE_MISUSE_BKPT;
+ }
+#endif
+}
+
+/*
+** Enter the mutex.
+*/
+static void checkMutexEnter(sqlite3_mutex *p){
+ CheckMutex *pCheck = (CheckMutex*)p;
+ if( pCheck->iType==SQLITE_MUTEX_WARNONCONTENTION ){
+ if( SQLITE_OK==pGlobalMutexMethods->xMutexTry(pCheck->mutex) ){
+ return;
+ }
+ sqlite3_log(SQLITE_MISUSE,
+ "illegal multi-threaded access to database connection"
+ );
+ }
+ pGlobalMutexMethods->xMutexEnter(pCheck->mutex);
+}
+
+/*
+** Enter the mutex (do not block).
+*/
+static int checkMutexTry(sqlite3_mutex *p){
+ CheckMutex *pCheck = (CheckMutex*)p;
+ return pGlobalMutexMethods->xMutexTry(pCheck->mutex);
+}
+
+/*
+** Leave the mutex.
+*/
+static void checkMutexLeave(sqlite3_mutex *p){
+ CheckMutex *pCheck = (CheckMutex*)p;
+ pGlobalMutexMethods->xMutexLeave(pCheck->mutex);
+}
+
+sqlite3_mutex_methods const *multiThreadedCheckMutex(void){
+ static const sqlite3_mutex_methods sMutex = {
+ checkMutexInit,
+ checkMutexEnd,
+ checkMutexAlloc,
+ checkMutexFree,
+ checkMutexEnter,
+ checkMutexTry,
+ checkMutexLeave,
+#ifdef SQLITE_DEBUG
+ checkMutexHeld,
+ checkMutexNotheld
+#else
+ 0,
+ 0
+#endif
+ };
+ return &sMutex;
+}
+
+/*
+** Mark the SQLITE_MUTEX_RECURSIVE mutex passed as the only argument as
+** one on which there should be no contention.
+*/
+SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex *p){
+ if( sqlite3GlobalConfig.mutex.xMutexAlloc==checkMutexAlloc ){
+ CheckMutex *pCheck = (CheckMutex*)p;
+ assert( pCheck->iType==SQLITE_MUTEX_RECURSIVE );
+ pCheck->iType = SQLITE_MUTEX_WARNONCONTENTION;
+ }
+}
+#endif /* ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS */
+
/*
** Initialize the mutex system.
*/
sqlite3_mutex_methods *pTo = &sqlite3GlobalConfig.mutex;
if( sqlite3GlobalConfig.bCoreMutex ){
+#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS
+ pFrom = multiThreadedCheckMutex();
+#else
pFrom = sqlite3DefaultMutex();
+#endif
}else{
pFrom = sqlite3NoopMutex();
}
/*
** Retrieve a pointer to a static mutex or allocate a new dynamic one.
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int id){
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int id){
#ifndef SQLITE_OMIT_AUTOINIT
if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0;
if( id>SQLITE_MUTEX_RECURSIVE && sqlite3MutexInit() ) return 0;
/*
** Free a dynamic mutex.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexFree );
sqlite3GlobalConfig.mutex.xMutexFree(p);
** Obtain the mutex p. If some other thread already has the mutex, block
** until it can be obtained.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexEnter );
sqlite3GlobalConfig.mutex.xMutexEnter(p);
** Obtain the mutex p. If successful, return SQLITE_OK. Otherwise, if another
** thread holds the mutex and it cannot be obtained, return SQLITE_BUSY.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex *p){
int rc = SQLITE_OK;
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexTry );
** is not currently entered. If a NULL pointer is passed as an argument
** this function is a no-op.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex *p){
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex *p){
if( p ){
assert( sqlite3GlobalConfig.mutex.xMutexLeave );
sqlite3GlobalConfig.mutex.xMutexLeave(p);
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
** intended for use inside assert() statements.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex *p){
assert( p==0 || sqlite3GlobalConfig.mutex.xMutexHeld );
return p==0 || sqlite3GlobalConfig.mutex.xMutexHeld(p);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex *p){
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex *p){
assert( p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld );
return p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld(p);
}
#endif /* !defined(SQLITE_MUTEX_OMIT) */
+
/************** End of mutex.c ***********************************************/
/************** Begin file mutex_noop.c **************************************/
/*
#endif
};
#if SQLITE_MUTEX_NREF
-#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER, 0, 0, (pthread_t)0, 0 }
+# define SQLITE3_MUTEX_INITIALIZER(id) \
+ {PTHREAD_MUTEX_INITIALIZER,id,0,(pthread_t)0,0}
+#elif defined(SQLITE_ENABLE_API_ARMOR)
+# define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER, id }
#else
-#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER }
+#define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER }
#endif
/*
*/
static sqlite3_mutex *pthreadMutexAlloc(int iType){
static sqlite3_mutex staticMutexes[] = {
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER
+ SQLITE3_MUTEX_INITIALIZER(2),
+ SQLITE3_MUTEX_INITIALIZER(3),
+ SQLITE3_MUTEX_INITIALIZER(4),
+ SQLITE3_MUTEX_INITIALIZER(5),
+ SQLITE3_MUTEX_INITIALIZER(6),
+ SQLITE3_MUTEX_INITIALIZER(7),
+ SQLITE3_MUTEX_INITIALIZER(8),
+ SQLITE3_MUTEX_INITIALIZER(9),
+ SQLITE3_MUTEX_INITIALIZER(10),
+ SQLITE3_MUTEX_INITIALIZER(11),
+ SQLITE3_MUTEX_INITIALIZER(12),
+ SQLITE3_MUTEX_INITIALIZER(13)
};
sqlite3_mutex *p;
switch( iType ){
pthread_mutexattr_settype(&recursiveAttr, PTHREAD_MUTEX_RECURSIVE);
pthread_mutex_init(&p->mutex, &recursiveAttr);
pthread_mutexattr_destroy(&recursiveAttr);
+#endif
+#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR)
+ p->id = SQLITE_MUTEX_RECURSIVE;
#endif
}
break;
p = sqlite3MallocZero( sizeof(*p) );
if( p ){
pthread_mutex_init(&p->mutex, 0);
+#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR)
+ p->id = SQLITE_MUTEX_FAST;
+#endif
}
break;
}
}
}
#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR)
- if( p ) p->id = iType;
+ assert( p==0 || p->id==iType );
#endif
return p;
}
*/
#ifdef SQLITE_PERFORMANCE_TRACE
-/*
-** hwtime.h contains inline assembler code for implementing
+/*
+** hwtime.h contains inline assembler code for implementing
** high-performance timing routines.
*/
/************** Include hwtime.h in the middle of os_common.h ****************/
** This file contains inline asm code for retrieving "high-performance"
** counters for x86 class CPUs.
*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
+#ifndef SQLITE_HWTIME_H
+#define SQLITE_HWTIME_H
/*
** The following routine only works on pentium-class (or newer) processors.
#endif
-#endif /* !defined(_HWTIME_H_) */
+#endif /* !defined(SQLITE_HWTIME_H) */
/************** End of hwtime.h **********************************************/
/************** Continuing where we left off in os_common.h ******************/
** of code will give us the ability to simulate a disk I/O error. This
** is used for testing the I/O recovery logic.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */
-SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */
-SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */
-SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */
-SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */
-SQLITE_API int sqlite3_diskfull_pending = 0;
-SQLITE_API int sqlite3_diskfull = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_io_error_hit;
+SQLITE_API extern int sqlite3_io_error_hardhit;
+SQLITE_API extern int sqlite3_io_error_pending;
+SQLITE_API extern int sqlite3_io_error_persist;
+SQLITE_API extern int sqlite3_io_error_benign;
+SQLITE_API extern int sqlite3_diskfull_pending;
+SQLITE_API extern int sqlite3_diskfull;
#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
#define SimulateIOError(CODE) \
if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
#define SimulateIOErrorBenign(X)
#define SimulateIOError(A)
#define SimulateDiskfullError(A)
-#endif
+#endif /* defined(SQLITE_TEST) */
/*
** When testing, keep a count of the number of open files.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_open_file_count = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_open_file_count;
#define OpenCounter(X) sqlite3_open_file_count+=(X)
#else
#define OpenCounter(X)
-#endif
+#endif /* defined(SQLITE_TEST) */
#endif /* !defined(_OS_COMMON_H_) */
**
** This file contains code that is specific to Windows.
*/
-#ifndef _OS_WIN_H_
-#define _OS_WIN_H_
+#ifndef SQLITE_OS_WIN_H
+#define SQLITE_OS_WIN_H
/*
** Include the primary Windows SDK header file.
# define SQLITE_OS_WIN_THREADS 0
#endif
-#endif /* _OS_WIN_H_ */
+#endif /* SQLITE_OS_WIN_H */
/************** End of os_win.h **********************************************/
/************** Continuing where we left off in mutex_w32.c ******************/
#ifdef SQLITE_DEBUG
volatile int nRef; /* Number of enterances */
volatile DWORD owner; /* Thread holding this mutex */
- volatile int trace; /* True to trace changes */
+ volatile LONG trace; /* True to trace changes */
#endif
};
#define SQLITE_W32_MUTEX_INITIALIZER { 0 }
#ifdef SQLITE_DEBUG
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \
+#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id, \
0L, (DWORD)0, 0 }
#else
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 }
+#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id }
#endif
#ifdef SQLITE_DEBUG
SQLITE_MEMORY_BARRIER;
#elif defined(__GNUC__)
__sync_synchronize();
-#elif !defined(SQLITE_DISABLE_INTRINSIC) && \
- defined(_MSC_VER) && _MSC_VER>=1300
+#elif MSVC_VERSION>=1300
_ReadWriteBarrier();
#elif defined(MemoryBarrier)
MemoryBarrier();
** Initialize and deinitialize the mutex subsystem.
*/
static sqlite3_mutex winMutex_staticMutexes[] = {
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER
+ SQLITE3_MUTEX_INITIALIZER(2),
+ SQLITE3_MUTEX_INITIALIZER(3),
+ SQLITE3_MUTEX_INITIALIZER(4),
+ SQLITE3_MUTEX_INITIALIZER(5),
+ SQLITE3_MUTEX_INITIALIZER(6),
+ SQLITE3_MUTEX_INITIALIZER(7),
+ SQLITE3_MUTEX_INITIALIZER(8),
+ SQLITE3_MUTEX_INITIALIZER(9),
+ SQLITE3_MUTEX_INITIALIZER(10),
+ SQLITE3_MUTEX_INITIALIZER(11),
+ SQLITE3_MUTEX_INITIALIZER(12),
+ SQLITE3_MUTEX_INITIALIZER(13)
};
static int winMutex_isInit = 0;
*/
static LONG SQLITE_WIN32_VOLATILE winMutex_lock = 0;
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void); /* os_win.c */
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
+SQLITE_API int sqlite3_win32_is_nt(void); /* os_win.c */
+SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
static int winMutexInit(void){
/* The first to increment to 1 does actual initialization */
}
#endif
p = &winMutex_staticMutexes[iType-2];
- p->id = iType;
#ifdef SQLITE_DEBUG
#ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC
- p->trace = 1;
+ InterlockedCompareExchange(&p->trace, 1, 0);
#endif
#endif
break;
}
}
+ assert( p==0 || p->id==iType );
return p;
}
p->owner = tid;
p->nRef++;
if( p->trace ){
- OSTRACE(("ENTER-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
- tid, p, p->trace, p->nRef));
+ OSTRACE(("ENTER-MUTEX tid=%lu, mutex(%d)=%p (%d), nRef=%d\n",
+ tid, p->id, p, p->trace, p->nRef));
}
#endif
}
#endif
#ifdef SQLITE_DEBUG
if( p->trace ){
- OSTRACE(("TRY-MUTEX tid=%lu, mutex=%p (%d), owner=%lu, nRef=%d, rc=%s\n",
- tid, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc)));
+ OSTRACE(("TRY-MUTEX tid=%lu, mutex(%d)=%p (%d), owner=%lu, nRef=%d, rc=%s\n",
+ tid, p->id, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc)));
}
#endif
return rc;
LeaveCriticalSection(&p->mutex);
#ifdef SQLITE_DEBUG
if( p->trace ){
- OSTRACE(("LEAVE-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
- tid, p, p->trace, p->nRef));
+ OSTRACE(("LEAVE-MUTEX tid=%lu, mutex(%d)=%p (%d), nRef=%d\n",
+ tid, p->id, p, p->trace, p->nRef));
}
#endif
}
** held by SQLite. An example of non-essential memory is memory used to
** cache database pages that are not currently in use.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int n){
+SQLITE_API int sqlite3_release_memory(int n){
#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
return sqlite3PcacheReleaseMemory(n);
#else
#endif
}
-/*
-** An instance of the following object records the location of
-** each unused scratch buffer.
-*/
-typedef struct ScratchFreeslot {
- struct ScratchFreeslot *pNext; /* Next unused scratch buffer */
-} ScratchFreeslot;
-
/*
** State information local to the memory allocation subsystem.
*/
sqlite3_mutex *mutex; /* Mutex to serialize access */
sqlite3_int64 alarmThreshold; /* The soft heap limit */
- /*
- ** Pointers to the end of sqlite3GlobalConfig.pScratch memory
- ** (so that a range test can be used to determine if an allocation
- ** being freed came from pScratch) and a pointer to the list of
- ** unused scratch allocations.
- */
- void *pScratchEnd;
- ScratchFreeslot *pScratchFree;
- u32 nScratchFree;
-
/*
** True if heap is nearly "full" where "full" is defined by the
** sqlite3_soft_heap_limit() setting.
*/
int nearlyFull;
-} mem0 = { 0, 0, 0, 0, 0, 0 };
+} mem0 = { 0, 0, 0 };
#define mem0 GLOBAL(struct Mem0Global, mem0)
** that was invoked when memory usage grew too large. Now it is a
** no-op.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_memory_alarm(
+SQLITE_API int sqlite3_memory_alarm(
void(*xCallback)(void *pArg, sqlite3_int64 used,int N),
void *pArg,
sqlite3_int64 iThreshold
** Set the soft heap-size limit for the library. Passing a zero or
** negative value indicates no limit.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 n){
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 n){
sqlite3_int64 priorLimit;
sqlite3_int64 excess;
sqlite3_int64 nUsed;
if( excess>0 ) sqlite3_release_memory((int)(excess & 0x7fffffff));
return priorLimit;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_soft_heap_limit(int n){
+SQLITE_API void sqlite3_soft_heap_limit(int n){
if( n<0 ) n = 0;
sqlite3_soft_heap_limit64(n);
}
sqlite3MemSetDefault();
}
memset(&mem0, 0, sizeof(mem0));
- if( sqlite3GlobalConfig.bCoreMutex ){
- mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
- }
- if( sqlite3GlobalConfig.pScratch && sqlite3GlobalConfig.szScratch>=100
- && sqlite3GlobalConfig.nScratch>0 ){
- int i, n, sz;
- ScratchFreeslot *pSlot;
- sz = ROUNDDOWN8(sqlite3GlobalConfig.szScratch);
- sqlite3GlobalConfig.szScratch = sz;
- pSlot = (ScratchFreeslot*)sqlite3GlobalConfig.pScratch;
- n = sqlite3GlobalConfig.nScratch;
- mem0.pScratchFree = pSlot;
- mem0.nScratchFree = n;
- for(i=0; i<n-1; i++){
- pSlot->pNext = (ScratchFreeslot*)(sz+(char*)pSlot);
- pSlot = pSlot->pNext;
- }
- pSlot->pNext = 0;
- mem0.pScratchEnd = (void*)&pSlot[1];
- }else{
- mem0.pScratchEnd = 0;
- sqlite3GlobalConfig.pScratch = 0;
- sqlite3GlobalConfig.szScratch = 0;
- sqlite3GlobalConfig.nScratch = 0;
- }
+ mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512
|| sqlite3GlobalConfig.nPage<=0 ){
sqlite3GlobalConfig.pPage = 0;
/*
** Return the amount of memory currently checked out.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void){
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void){
sqlite3_int64 res, mx;
sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, 0);
return res;
** checked out since either the beginning of this process
** or since the most recent reset.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag){
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag){
sqlite3_int64 res, mx;
sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, resetFlag);
return mx;
** Do a memory allocation with statistics and alarms. Assume the
** lock is already held.
*/
-static int mallocWithAlarm(int n, void **pp){
- int nFull;
+static void mallocWithAlarm(int n, void **pp){
void *p;
+ int nFull;
assert( sqlite3_mutex_held(mem0.mutex) );
+ assert( n>0 );
+
+ /* In Firefox (circa 2017-02-08), xRoundup() is remapped to an internal
+ ** implementation of malloc_good_size(), which must be called in debug
+ ** mode and specifically when the DMD "Dark Matter Detector" is enabled
+ ** or else a crash results. Hence, do not attempt to optimize out the
+ ** following xRoundup() call. */
nFull = sqlite3GlobalConfig.m.xRoundup(n);
- sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, n);
+
+#ifdef SQLITE_MAX_MEMORY
+ if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED)+nFull>SQLITE_MAX_MEMORY ){
+ *pp = 0;
+ return;
+ }
+#endif
+
+ sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, n);
if( mem0.alarmThreshold>0 ){
sqlite3_int64 nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED);
if( nUsed >= mem0.alarmThreshold - nFull ){
sqlite3StatusUp(SQLITE_STATUS_MALLOC_COUNT, 1);
}
*pp = p;
- return nFull;
}
/*
** First make sure the memory subsystem is initialized, then do the
** allocation.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int n){
+SQLITE_API void *sqlite3_malloc(int n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
return n<=0 ? 0 : sqlite3Malloc(n);
}
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64 n){
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64 n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
return sqlite3Malloc(n);
}
-/*
-** Each thread may only have a single outstanding allocation from
-** xScratchMalloc(). We verify this constraint in the single-threaded
-** case by setting scratchAllocOut to 1 when an allocation
-** is outstanding clearing it when the allocation is freed.
-*/
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
-static int scratchAllocOut = 0;
-#endif
-
-
-/*
-** Allocate memory that is to be used and released right away.
-** This routine is similar to alloca() in that it is not intended
-** for situations where the memory might be held long-term. This
-** routine is intended to get memory to old large transient data
-** structures that would not normally fit on the stack of an
-** embedded processor.
-*/
-SQLITE_PRIVATE void *sqlite3ScratchMalloc(int n){
- void *p;
- assert( n>0 );
-
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusSet(SQLITE_STATUS_SCRATCH_SIZE, n);
- if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){
- p = mem0.pScratchFree;
- mem0.pScratchFree = mem0.pScratchFree->pNext;
- mem0.nScratchFree--;
- sqlite3StatusUp(SQLITE_STATUS_SCRATCH_USED, 1);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- sqlite3_mutex_leave(mem0.mutex);
- p = sqlite3Malloc(n);
- if( sqlite3GlobalConfig.bMemstat && p ){
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusUp(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p));
- sqlite3_mutex_leave(mem0.mutex);
- }
- sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH);
- }
- assert( sqlite3_mutex_notheld(mem0.mutex) );
-
-
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
- /* EVIDENCE-OF: R-12970-05880 SQLite will not use more than one scratch
- ** buffers per thread.
- **
- ** This can only be checked in single-threaded mode.
- */
- assert( scratchAllocOut==0 );
- if( p ) scratchAllocOut++;
-#endif
-
- return p;
-}
-SQLITE_PRIVATE void sqlite3ScratchFree(void *p){
- if( p ){
-
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
- /* Verify that no more than two scratch allocation per thread
- ** is outstanding at one time. (This is only checked in the
- ** single-threaded case since checking in the multi-threaded case
- ** would be much more complicated.) */
- assert( scratchAllocOut>=1 && scratchAllocOut<=2 );
- scratchAllocOut--;
-#endif
-
- if( p>=sqlite3GlobalConfig.pScratch && p<mem0.pScratchEnd ){
- /* Release memory from the SQLITE_CONFIG_SCRATCH allocation */
- ScratchFreeslot *pSlot;
- pSlot = (ScratchFreeslot*)p;
- sqlite3_mutex_enter(mem0.mutex);
- pSlot->pNext = mem0.pScratchFree;
- mem0.pScratchFree = pSlot;
- mem0.nScratchFree++;
- assert( mem0.nScratchFree <= (u32)sqlite3GlobalConfig.nScratch );
- sqlite3StatusDown(SQLITE_STATUS_SCRATCH_USED, 1);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- /* Release memory back to the heap */
- assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) );
- assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_SCRATCH) );
- sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
- if( sqlite3GlobalConfig.bMemstat ){
- int iSize = sqlite3MallocSize(p);
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusDown(SQLITE_STATUS_SCRATCH_OVERFLOW, iSize);
- sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, iSize);
- sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1);
- sqlite3GlobalConfig.m.xFree(p);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- sqlite3GlobalConfig.m.xFree(p);
- }
- }
- }
-}
-
/*
** TRUE if p is a lookaside memory allocation from db
*/
#ifndef SQLITE_OMIT_LOOKASIDE
static int isLookaside(sqlite3 *db, void *p){
- return p>=db->lookaside.pStart && p<db->lookaside.pEnd;
+ return SQLITE_WITHIN(p, db->lookaside.pStart, db->lookaside.pEnd);
}
#else
#define isLookaside(A,B) 0
return sqlite3GlobalConfig.m.xSize(p);
}
SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3 *db, void *p){
+ assert( p!=0 );
if( db==0 || !isLookaside(db,p) ){
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
if( db==0 ){
assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
return db->lookaside.sz;
}
}
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void *p){
+SQLITE_API sqlite3_uint64 sqlite3_msize(void *p){
assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
- return (sqlite3_uint64)sqlite3GlobalConfig.m.xSize(p);
+ return p ? sqlite3GlobalConfig.m.xSize(p) : 0;
}
/*
** Free memory previously obtained from sqlite3Malloc().
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void *p){
+SQLITE_API void sqlite3_free(void *p){
if( p==0 ) return; /* IMP: R-49053-54554 */
assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
/*
** Free memory that might be associated with a particular database
-** connection.
+** connection. Calling sqlite3DbFree(D,X) for X==0 is a harmless no-op.
+** The sqlite3DbFreeNN(D,X) version requires that X be non-NULL.
*/
-SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){
+SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3 *db, void *p){
assert( db==0 || sqlite3_mutex_held(db->mutex) );
- if( p==0 ) return;
+ assert( p!=0 );
if( db ){
if( db->pnBytesFreed ){
measureAllocationSize(db, p);
}
if( isLookaside(db, p) ){
LookasideSlot *pBuf = (LookasideSlot*)p;
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
/* Trash all content in the buffer being freed */
memset(p, 0xaa, db->lookaside.sz);
#endif
pBuf->pNext = db->lookaside.pFree;
db->lookaside.pFree = pBuf;
- db->lookaside.nOut--;
return;
}
}
sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
sqlite3_free(p);
}
+SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){
+ assert( db==0 || sqlite3_mutex_held(db->mutex) );
+ if( p ) sqlite3DbFreeNN(db, p);
+}
/*
** Change the size of an existing memory allocation
pNew = pOld;
}else if( sqlite3GlobalConfig.bMemstat ){
sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusSet(SQLITE_STATUS_MALLOC_SIZE, (int)nBytes);
+ sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, (int)nBytes);
nDiff = nNew - nOld;
- if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >=
+ if( nDiff>0 && sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >=
mem0.alarmThreshold-nDiff ){
sqlite3MallocAlarm(nDiff);
}
** The public interface to sqlite3Realloc. Make sure that the memory
** subsystem is initialized prior to invoking sqliteRealloc.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void *pOld, int n){
+SQLITE_API void *sqlite3_realloc(void *pOld, int n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
if( n<0 ) n = 0; /* IMP: R-26507-47431 */
return sqlite3Realloc(pOld, n);
}
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
+SQLITE_API void *sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
** the mallocFailed flag in the connection pointer.
*/
SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3 *db, u64 n){
- void *p = sqlite3DbMallocRaw(db, n);
- if( p ){
- memset(p, 0, (size_t)n);
- }
+ void *p;
+ testcase( db==0 );
+ p = sqlite3DbMallocRaw(db, n);
+ if( p ) memset(p, 0, (size_t)n);
+ return p;
+}
+
+
+/* Finish the work of sqlite3DbMallocRawNN for the unusual and
+** slower case when the allocation cannot be fulfilled using lookaside.
+*/
+static SQLITE_NOINLINE void *dbMallocRawFinish(sqlite3 *db, u64 n){
+ void *p;
+ assert( db!=0 );
+ p = sqlite3Malloc(n);
+ if( !p ) sqlite3OomFault(db);
+ sqlite3MemdebugSetType(p,
+ (db->lookaside.bDisable==0) ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP);
return p;
}
/*
-** Allocate and zero memory. If the allocation fails, make
-** the mallocFailed flag in the connection pointer.
+** Allocate memory, either lookaside (if possible) or heap.
+** If the allocation fails, set the mallocFailed flag in
+** the connection pointer.
**
** If db!=0 and db->mallocFailed is true (indicating a prior malloc
** failure on the same database connection) then always return 0.
**
** In other words, if a subsequent malloc (ex: "b") worked, it is assumed
** that all prior mallocs (ex: "a") worked too.
+**
+** The sqlite3MallocRawNN() variant guarantees that the "db" parameter is
+** not a NULL pointer.
*/
SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3 *db, u64 n){
void *p;
- assert( db==0 || sqlite3_mutex_held(db->mutex) );
- assert( db==0 || db->pnBytesFreed==0 );
+ if( db ) return sqlite3DbMallocRawNN(db, n);
+ p = sqlite3Malloc(n);
+ sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
+ return p;
+}
+SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3 *db, u64 n){
#ifndef SQLITE_OMIT_LOOKASIDE
- if( db ){
- LookasideSlot *pBuf;
- if( db->mallocFailed ){
- return 0;
- }
- if( db->lookaside.bEnabled ){
- if( n>db->lookaside.sz ){
- db->lookaside.anStat[1]++;
- }else if( (pBuf = db->lookaside.pFree)==0 ){
- db->lookaside.anStat[2]++;
- }else{
- db->lookaside.pFree = pBuf->pNext;
- db->lookaside.nOut++;
- db->lookaside.anStat[0]++;
- if( db->lookaside.nOut>db->lookaside.mxOut ){
- db->lookaside.mxOut = db->lookaside.nOut;
- }
- return (void*)pBuf;
- }
- }
+ LookasideSlot *pBuf;
+ assert( db!=0 );
+ assert( sqlite3_mutex_held(db->mutex) );
+ assert( db->pnBytesFreed==0 );
+ if( db->lookaside.bDisable==0 ){
+ assert( db->mallocFailed==0 );
+ if( n>db->lookaside.sz ){
+ db->lookaside.anStat[1]++;
+ }else if( (pBuf = db->lookaside.pFree)!=0 ){
+ db->lookaside.pFree = pBuf->pNext;
+ db->lookaside.anStat[0]++;
+ return (void*)pBuf;
+ }else if( (pBuf = db->lookaside.pInit)!=0 ){
+ db->lookaside.pInit = pBuf->pNext;
+ db->lookaside.anStat[0]++;
+ return (void*)pBuf;
+ }else{
+ db->lookaside.anStat[2]++;
+ }
+ }else if( db->mallocFailed ){
+ return 0;
}
#else
- if( db && db->mallocFailed ){
+ assert( db!=0 );
+ assert( sqlite3_mutex_held(db->mutex) );
+ assert( db->pnBytesFreed==0 );
+ if( db->mallocFailed ){
return 0;
}
#endif
- p = sqlite3Malloc(n);
- if( !p && db ){
- db->mallocFailed = 1;
- }
- sqlite3MemdebugSetType(p,
- (db && db->lookaside.bEnabled) ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP);
- return p;
+ return dbMallocRawFinish(db, n);
}
+/* Forward declaration */
+static SQLITE_NOINLINE void *dbReallocFinish(sqlite3 *db, void *p, u64 n);
+
/*
** Resize the block of memory pointed to by p to n bytes. If the
** resize fails, set the mallocFailed flag in the connection object.
*/
SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *db, void *p, u64 n){
- void *pNew = 0;
assert( db!=0 );
+ if( p==0 ) return sqlite3DbMallocRawNN(db, n);
assert( sqlite3_mutex_held(db->mutex) );
+ if( isLookaside(db,p) && n<=db->lookaside.sz ) return p;
+ return dbReallocFinish(db, p, n);
+}
+static SQLITE_NOINLINE void *dbReallocFinish(sqlite3 *db, void *p, u64 n){
+ void *pNew = 0;
+ assert( db!=0 );
+ assert( p!=0 );
if( db->mallocFailed==0 ){
- if( p==0 ){
- return sqlite3DbMallocRaw(db, n);
- }
if( isLookaside(db, p) ){
- if( n<=db->lookaside.sz ){
- return p;
- }
- pNew = sqlite3DbMallocRaw(db, n);
+ pNew = sqlite3DbMallocRawNN(db, n);
if( pNew ){
memcpy(pNew, p, db->lookaside.sz);
sqlite3DbFree(db, p);
sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
pNew = sqlite3_realloc64(p, n);
if( !pNew ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
sqlite3MemdebugSetType(pNew,
- (db->lookaside.bEnabled ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP));
+ (db->lookaside.bDisable==0 ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP));
}
}
return pNew;
if( z==0 ){
return 0;
}
- n = sqlite3Strlen30(z) + 1;
- assert( (n&0x7fffffff)==n );
- zNew = sqlite3DbMallocRaw(db, (int)n);
+ n = strlen(z) + 1;
+ zNew = sqlite3DbMallocRaw(db, n);
if( zNew ){
memcpy(zNew, z, n);
}
}
SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3 *db, const char *z, u64 n){
char *zNew;
+ assert( db!=0 );
if( z==0 ){
return 0;
}
assert( (n&0x7fffffff)==n );
- zNew = sqlite3DbMallocRaw(db, n+1);
+ zNew = sqlite3DbMallocRawNN(db, n+1);
if( zNew ){
memcpy(zNew, z, (size_t)n);
zNew[n] = 0;
return zNew;
}
+/*
+** The text between zStart and zEnd represents a phrase within a larger
+** SQL statement. Make a copy of this phrase in space obtained form
+** sqlite3DbMalloc(). Omit leading and trailing whitespace.
+*/
+SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){
+ int n;
+ while( sqlite3Isspace(zStart[0]) ) zStart++;
+ n = (int)(zEnd - zStart);
+ while( ALWAYS(n>0) && sqlite3Isspace(zStart[n-1]) ) n--;
+ return sqlite3DbStrNDup(db, zStart, n);
+}
+
/*
** Free any prior content in *pz and replace it with a copy of zNew.
*/
*pz = sqlite3DbStrDup(db, zNew);
}
+/*
+** Call this routine to record the fact that an OOM (out-of-memory) error
+** has happened. This routine will set db->mallocFailed, and also
+** temporarily disable the lookaside memory allocator and interrupt
+** any running VDBEs.
+*/
+SQLITE_PRIVATE void sqlite3OomFault(sqlite3 *db){
+ if( db->mallocFailed==0 && db->bBenignMalloc==0 ){
+ db->mallocFailed = 1;
+ if( db->nVdbeExec>0 ){
+ db->u1.isInterrupted = 1;
+ }
+ db->lookaside.bDisable++;
+ }
+}
+
+/*
+** This routine reactivates the memory allocator and clears the
+** db->mallocFailed flag as necessary.
+**
+** The memory allocator is not restarted if there are running
+** VDBEs.
+*/
+SQLITE_PRIVATE void sqlite3OomClear(sqlite3 *db){
+ if( db->mallocFailed && db->nVdbeExec==0 ){
+ db->mallocFailed = 0;
+ db->u1.isInterrupted = 0;
+ assert( db->lookaside.bDisable>0 );
+ db->lookaside.bDisable--;
+ }
+}
+
/*
** Take actions at the end of an API call to indicate an OOM error
*/
static SQLITE_NOINLINE int apiOomError(sqlite3 *db){
- db->mallocFailed = 0;
+ sqlite3OomClear(db);
sqlite3Error(db, SQLITE_NOMEM);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/*
** Conversion types fall into various categories as defined by the
** following enumeration.
*/
-#define etRADIX 1 /* Integer types. %d, %x, %o, and so forth */
-#define etFLOAT 2 /* Floating point. %f */
-#define etEXP 3 /* Exponentional notation. %e and %E */
-#define etGENERIC 4 /* Floating or exponential, depending on exponent. %g */
-#define etSIZE 5 /* Return number of characters processed so far. %n */
-#define etSTRING 6 /* Strings. %s */
-#define etDYNSTRING 7 /* Dynamically allocated strings. %z */
-#define etPERCENT 8 /* Percent symbol. %% */
-#define etCHARX 9 /* Characters. %c */
+#define etRADIX 0 /* non-decimal integer types. %x %o */
+#define etFLOAT 1 /* Floating point. %f */
+#define etEXP 2 /* Exponentional notation. %e and %E */
+#define etGENERIC 3 /* Floating or exponential, depending on exponent. %g */
+#define etSIZE 4 /* Return number of characters processed so far. %n */
+#define etSTRING 5 /* Strings. %s */
+#define etDYNSTRING 6 /* Dynamically allocated strings. %z */
+#define etPERCENT 7 /* Percent symbol. %% */
+#define etCHARX 8 /* Characters. %c */
/* The rest are extensions, not normally found in printf() */
-#define etSQLESCAPE 10 /* Strings with '\'' doubled. %q */
-#define etSQLESCAPE2 11 /* Strings with '\'' doubled and enclosed in '',
+#define etSQLESCAPE 9 /* Strings with '\'' doubled. %q */
+#define etSQLESCAPE2 10 /* Strings with '\'' doubled and enclosed in '',
NULL pointers replaced by SQL NULL. %Q */
-#define etTOKEN 12 /* a pointer to a Token structure */
-#define etSRCLIST 13 /* a pointer to a SrcList */
-#define etPOINTER 14 /* The %p conversion */
-#define etSQLESCAPE3 15 /* %w -> Strings with '\"' doubled */
-#define etORDINAL 16 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
+#define etTOKEN 11 /* a pointer to a Token structure */
+#define etSRCLIST 12 /* a pointer to a SrcList */
+#define etPOINTER 13 /* The %p conversion */
+#define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */
+#define etORDINAL 15 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
+#define etDECIMAL 16 /* %d or %u, but not %x, %o */
-#define etINVALID 0 /* Any unrecognized conversion type */
+#define etINVALID 17 /* Any unrecognized conversion type */
/*
/*
** Allowed values for et_info.flags
*/
-#define FLAG_SIGNED 1 /* True if the value to convert is signed */
-#define FLAG_INTERN 2 /* True if for internal use only */
-#define FLAG_STRING 4 /* Allow infinity precision */
+#define FLAG_SIGNED 1 /* True if the value to convert is signed */
+#define FLAG_STRING 4 /* Allow infinite precision */
/*
static const char aDigits[] = "0123456789ABCDEF0123456789abcdef";
static const char aPrefix[] = "-x0\000X0";
static const et_info fmtinfo[] = {
- { 'd', 10, 1, etRADIX, 0, 0 },
+ { 'd', 10, 1, etDECIMAL, 0, 0 },
{ 's', 0, 4, etSTRING, 0, 0 },
{ 'g', 0, 1, etGENERIC, 30, 0 },
{ 'z', 0, 4, etDYNSTRING, 0, 0 },
{ 'w', 0, 4, etSQLESCAPE3, 0, 0 },
{ 'c', 0, 0, etCHARX, 0, 0 },
{ 'o', 8, 0, etRADIX, 0, 2 },
- { 'u', 10, 0, etRADIX, 0, 0 },
+ { 'u', 10, 0, etDECIMAL, 0, 0 },
{ 'x', 16, 0, etRADIX, 16, 1 },
{ 'X', 16, 0, etRADIX, 0, 4 },
#ifndef SQLITE_OMIT_FLOATING_POINT
{ 'E', 0, 1, etEXP, 14, 0 },
{ 'G', 0, 1, etGENERIC, 14, 0 },
#endif
- { 'i', 10, 1, etRADIX, 0, 0 },
+ { 'i', 10, 1, etDECIMAL, 0, 0 },
{ 'n', 0, 0, etSIZE, 0, 0 },
{ '%', 0, 0, etPERCENT, 0, 0 },
{ 'p', 16, 0, etPOINTER, 0, 1 },
-/* All the rest have the FLAG_INTERN bit set and are thus for internal
-** use only */
- { 'T', 0, 2, etTOKEN, 0, 0 },
- { 'S', 0, 2, etSRCLIST, 0, 0 },
- { 'r', 10, 3, etORDINAL, 0, 0 },
+ /* All the rest are undocumented and are for internal use only */
+ { 'T', 0, 0, etTOKEN, 0, 0 },
+ { 'S', 0, 0, etSRCLIST, 0, 0 },
+ { 'r', 10, 1, etORDINAL, 0, 0 },
};
/*
*/
SQLITE_PRIVATE void sqlite3VXPrintf(
StrAccum *pAccum, /* Accumulate results here */
- u32 bFlags, /* SQLITE_PRINTF_* flags */
const char *fmt, /* Format string */
va_list ap /* arguments */
){
int idx; /* A general purpose loop counter */
int width; /* Width of the current field */
etByte flag_leftjustify; /* True if "-" flag is present */
- etByte flag_plussign; /* True if "+" flag is present */
- etByte flag_blanksign; /* True if " " flag is present */
+ etByte flag_prefix; /* '+' or ' ' or 0 for prefix */
etByte flag_alternateform; /* True if "#" flag is present */
etByte flag_altform2; /* True if "!" flag is present */
etByte flag_zeropad; /* True if field width constant starts with zero */
- etByte flag_long; /* True if "l" flag is present */
- etByte flag_longlong; /* True if the "ll" flag is present */
+ etByte flag_long; /* 1 for the "l" flag, 2 for "ll", 0 by default */
etByte done; /* Loop termination flag */
- etByte xtype = 0; /* Conversion paradigm */
+ etByte cThousand; /* Thousands separator for %d and %u */
+ etByte xtype = etINVALID; /* Conversion paradigm */
u8 bArgList; /* True for SQLITE_PRINTF_SQLFUNC */
- u8 useIntern; /* Ok to use internal conversions (ex: %T) */
char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */
sqlite_uint64 longvalue; /* Value for integer types */
LONGDOUBLE_TYPE realvalue; /* Value for real types */
PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */
char buf[etBUFSIZE]; /* Conversion buffer */
+ /* pAccum never starts out with an empty buffer that was obtained from
+ ** malloc(). This precondition is required by the mprintf("%z...")
+ ** optimization. */
+ assert( pAccum->nChar>0 || (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 );
+
bufpt = 0;
- if( bFlags ){
- if( (bArgList = (bFlags & SQLITE_PRINTF_SQLFUNC))!=0 ){
- pArgList = va_arg(ap, PrintfArguments*);
- }
- useIntern = bFlags & SQLITE_PRINTF_INTERNAL;
+ if( (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC)!=0 ){
+ pArgList = va_arg(ap, PrintfArguments*);
+ bArgList = 1;
}else{
- bArgList = useIntern = 0;
+ bArgList = 0;
}
for(; (c=(*fmt))!=0; ++fmt){
if( c!='%' ){
break;
}
/* Find out what flags are present */
- flag_leftjustify = flag_plussign = flag_blanksign =
+ flag_leftjustify = flag_prefix = cThousand =
flag_alternateform = flag_altform2 = flag_zeropad = 0;
done = 0;
do{
switch( c ){
case '-': flag_leftjustify = 1; break;
- case '+': flag_plussign = 1; break;
- case ' ': flag_blanksign = 1; break;
+ case '+': flag_prefix = '+'; break;
+ case ' ': flag_prefix = ' '; break;
case '#': flag_alternateform = 1; break;
case '!': flag_altform2 = 1; break;
case '0': flag_zeropad = 1; break;
+ case ',': cThousand = ','; break;
default: done = 1; break;
}
}while( !done && (c=(*++fmt))!=0 );
testcase( wx>0x7fffffff );
width = wx & 0x7fffffff;
}
+ assert( width>=0 );
+#ifdef SQLITE_PRINTF_PRECISION_LIMIT
+ if( width>SQLITE_PRINTF_PRECISION_LIMIT ){
+ width = SQLITE_PRINTF_PRECISION_LIMIT;
+ }
+#endif
/* Get the precision */
if( c=='.' ){
}else{
precision = -1;
}
+ assert( precision>=(-1) );
+#ifdef SQLITE_PRINTF_PRECISION_LIMIT
+ if( precision>SQLITE_PRINTF_PRECISION_LIMIT ){
+ precision = SQLITE_PRINTF_PRECISION_LIMIT;
+ }
+#endif
+
+
/* Get the conversion type modifier */
if( c=='l' ){
flag_long = 1;
c = *++fmt;
if( c=='l' ){
- flag_longlong = 1;
+ flag_long = 2;
c = *++fmt;
- }else{
- flag_longlong = 0;
}
}else{
- flag_long = flag_longlong = 0;
+ flag_long = 0;
}
/* Fetch the info entry for the field */
infop = &fmtinfo[0];
for(idx=0; idx<ArraySize(fmtinfo); idx++){
if( c==fmtinfo[idx].fmttype ){
infop = &fmtinfo[idx];
- if( useIntern || (infop->flags & FLAG_INTERN)==0 ){
- xtype = infop->type;
- }else{
- return;
- }
+ xtype = infop->type;
break;
}
}
**
** flag_alternateform TRUE if a '#' is present.
** flag_altform2 TRUE if a '!' is present.
- ** flag_plussign TRUE if a '+' is present.
+ ** flag_prefix '+' or ' ' or zero
** flag_leftjustify TRUE if a '-' is present or if the
** field width was negative.
** flag_zeropad TRUE if the width began with 0.
- ** flag_long TRUE if the letter 'l' (ell) prefixed
- ** the conversion character.
- ** flag_longlong TRUE if the letter 'll' (ell ell) prefixed
- ** the conversion character.
- ** flag_blanksign TRUE if a ' ' is present.
+ ** flag_long 1 for "l", 2 for "ll"
** width The specified field width. This is
** always non-negative. Zero is the default.
** precision The specified precision. The default
*/
switch( xtype ){
case etPOINTER:
- flag_longlong = sizeof(char*)==sizeof(i64);
- flag_long = sizeof(char*)==sizeof(long int);
+ flag_long = sizeof(char*)==sizeof(i64) ? 2 :
+ sizeof(char*)==sizeof(long int) ? 1 : 0;
/* Fall through into the next case */
case etORDINAL:
- case etRADIX:
+ case etRADIX:
+ cThousand = 0;
+ /* Fall through into the next case */
+ case etDECIMAL:
if( infop->flags & FLAG_SIGNED ){
i64 v;
if( bArgList ){
v = getIntArg(pArgList);
- }else if( flag_longlong ){
- v = va_arg(ap,i64);
}else if( flag_long ){
- v = va_arg(ap,long int);
+ if( flag_long==2 ){
+ v = va_arg(ap,i64) ;
+ }else{
+ v = va_arg(ap,long int);
+ }
}else{
v = va_arg(ap,int);
}
prefix = '-';
}else{
longvalue = v;
- if( flag_plussign ) prefix = '+';
- else if( flag_blanksign ) prefix = ' ';
- else prefix = 0;
+ prefix = flag_prefix;
}
}else{
if( bArgList ){
longvalue = (u64)getIntArg(pArgList);
- }else if( flag_longlong ){
- longvalue = va_arg(ap,u64);
}else if( flag_long ){
- longvalue = va_arg(ap,unsigned long int);
+ if( flag_long==2 ){
+ longvalue = va_arg(ap,u64);
+ }else{
+ longvalue = va_arg(ap,unsigned long int);
+ }
}else{
longvalue = va_arg(ap,unsigned int);
}
if( flag_zeropad && precision<width-(prefix!=0) ){
precision = width-(prefix!=0);
}
- if( precision<etBUFSIZE-10 ){
+ if( precision<etBUFSIZE-10-etBUFSIZE/3 ){
nOut = etBUFSIZE;
zOut = buf;
}else{
- nOut = precision + 10;
- zOut = zExtra = sqlite3Malloc( nOut );
+ u64 n = (u64)precision + 10 + precision/3;
+ zOut = zExtra = sqlite3Malloc( n );
if( zOut==0 ){
setStrAccumError(pAccum, STRACCUM_NOMEM);
return;
}
+ nOut = (int)n;
}
bufpt = &zOut[nOut-1];
if( xtype==etORDINAL ){
}while( longvalue>0 );
}
length = (int)(&zOut[nOut-1]-bufpt);
- for(idx=precision-length; idx>0; idx--){
+ while( precision>length ){
*(--bufpt) = '0'; /* Zero pad */
+ length++;
+ }
+ if( cThousand ){
+ int nn = (length - 1)/3; /* Number of "," to insert */
+ int ix = (length - 1)%3 + 1;
+ bufpt -= nn;
+ for(idx=0; nn>0; idx++){
+ bufpt[idx] = bufpt[idx+nn];
+ ix--;
+ if( ix==0 ){
+ bufpt[++idx] = cThousand;
+ nn--;
+ ix = 3;
+ }
+ }
}
if( prefix ) *(--bufpt) = prefix; /* Add sign */
if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */
realvalue = -realvalue;
prefix = '-';
}else{
- if( flag_plussign ) prefix = '+';
- else if( flag_blanksign ) prefix = ' ';
- else prefix = 0;
+ prefix = flag_prefix;
}
if( xtype==etGENERIC && precision>0 ) precision--;
testcase( precision>0xfff );
case etCHARX:
if( bArgList ){
bufpt = getTextArg(pArgList);
- c = bufpt ? bufpt[0] : 0;
+ length = 1;
+ if( bufpt ){
+ buf[0] = c = *(bufpt++);
+ if( (c&0xc0)==0xc0 ){
+ while( length<4 && (bufpt[0]&0xc0)==0x80 ){
+ buf[length++] = *(bufpt++);
+ }
+ }
+ }else{
+ buf[0] = 0;
+ }
}else{
- c = va_arg(ap,int);
+ unsigned int ch = va_arg(ap,unsigned int);
+ if( ch<0x00080 ){
+ buf[0] = ch & 0xff;
+ length = 1;
+ }else if( ch<0x00800 ){
+ buf[0] = 0xc0 + (u8)((ch>>6)&0x1f);
+ buf[1] = 0x80 + (u8)(ch & 0x3f);
+ length = 2;
+ }else if( ch<0x10000 ){
+ buf[0] = 0xe0 + (u8)((ch>>12)&0x0f);
+ buf[1] = 0x80 + (u8)((ch>>6) & 0x3f);
+ buf[2] = 0x80 + (u8)(ch & 0x3f);
+ length = 3;
+ }else{
+ buf[0] = 0xf0 + (u8)((ch>>18) & 0x07);
+ buf[1] = 0x80 + (u8)((ch>>12) & 0x3f);
+ buf[2] = 0x80 + (u8)((ch>>6) & 0x3f);
+ buf[3] = 0x80 + (u8)(ch & 0x3f);
+ length = 4;
+ }
}
if( precision>1 ){
width -= precision-1;
sqlite3AppendChar(pAccum, width-1, ' ');
width = 0;
}
- sqlite3AppendChar(pAccum, precision-1, c);
+ while( precision-- > 1 ){
+ sqlite3StrAccumAppend(pAccum, buf, length);
+ }
}
- length = 1;
- buf[0] = c;
bufpt = buf;
- break;
+ flag_altform2 = 1;
+ goto adjust_width_for_utf8;
case etSTRING:
case etDYNSTRING:
if( bArgList ){
if( bufpt==0 ){
bufpt = "";
}else if( xtype==etDYNSTRING ){
+ if( pAccum->nChar==0 && pAccum->mxAlloc && width==0 && precision<0 ){
+ /* Special optimization for sqlite3_mprintf("%z..."):
+ ** Extend an existing memory allocation rather than creating
+ ** a new one. */
+ assert( (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 );
+ pAccum->zText = bufpt;
+ pAccum->nAlloc = sqlite3DbMallocSize(pAccum->db, bufpt);
+ pAccum->nChar = 0x7fffffff & (int)strlen(bufpt);
+ pAccum->printfFlags |= SQLITE_PRINTF_MALLOCED;
+ length = 0;
+ break;
+ }
zExtra = bufpt;
}
if( precision>=0 ){
- for(length=0; length<precision && bufpt[length]; length++){}
+ if( flag_altform2 ){
+ /* Set length to the number of bytes needed in order to display
+ ** precision characters */
+ unsigned char *z = (unsigned char*)bufpt;
+ while( precision-- > 0 && z[0] ){
+ SQLITE_SKIP_UTF8(z);
+ }
+ length = (int)(z - (unsigned char*)bufpt);
+ }else{
+ for(length=0; length<precision && bufpt[length]; length++){}
+ }
}else{
- length = sqlite3Strlen30(bufpt);
+ length = 0x7fffffff & (int)strlen(bufpt);
+ }
+ adjust_width_for_utf8:
+ if( flag_altform2 && width>0 ){
+ /* Adjust width to account for extra bytes in UTF-8 characters */
+ int ii = length - 1;
+ while( ii>=0 ) if( (bufpt[ii--] & 0xc0)==0x80 ) width++;
}
break;
- case etSQLESCAPE: /* Escape ' characters */
- case etSQLESCAPE2: /* Escape ' and enclose in '...' */
- case etSQLESCAPE3: { /* Escape " characters */
+ case etSQLESCAPE: /* %q: Escape ' characters */
+ case etSQLESCAPE2: /* %Q: Escape ' and enclose in '...' */
+ case etSQLESCAPE3: { /* %w: Escape " characters */
int i, j, k, n, isnull;
int needQuote;
char ch;
}
isnull = escarg==0;
if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)");
+ /* For %q, %Q, and %w, the precision is the number of byte (or
+ ** characters if the ! flags is present) to use from the input.
+ ** Because of the extra quoting characters inserted, the number
+ ** of output characters may be larger than the precision.
+ */
k = precision;
for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){
if( ch==q ) n++;
+ if( flag_altform2 && (ch&0xc0)==0xc0 ){
+ while( (escarg[i+1]&0xc0)==0x80 ){ i++; }
+ }
}
needQuote = !isnull && xtype==etSQLESCAPE2;
n += i + 3;
if( needQuote ) bufpt[j++] = q;
bufpt[j] = 0;
length = j;
- /* The precision in %q and %Q means how many input characters to
- ** consume, not the length of the output...
- ** if( precision>=0 && precision<length ) length = precision; */
- break;
+ goto adjust_width_for_utf8;
}
case etTOKEN: {
- Token *pToken = va_arg(ap, Token*);
+ Token *pToken;
+ if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return;
+ pToken = va_arg(ap, Token*);
assert( bArgList==0 );
if( pToken && pToken->n ){
sqlite3StrAccumAppend(pAccum, (const char*)pToken->z, pToken->n);
break;
}
case etSRCLIST: {
- SrcList *pSrc = va_arg(ap, SrcList*);
- int k = va_arg(ap, int);
- struct SrcList_item *pItem = &pSrc->a[k];
+ SrcList *pSrc;
+ int k;
+ struct SrcList_item *pItem;
+ if( (pAccum->printfFlags & SQLITE_PRINTF_INTERNAL)==0 ) return;
+ pSrc = va_arg(ap, SrcList*);
+ k = va_arg(ap, int);
+ pItem = &pSrc->a[k];
assert( bArgList==0 );
assert( k>=0 && k<pSrc->nSrc );
if( pItem->zDatabase ){
/*
** The text of the conversion is pointed to by "bufpt" and is
** "length" characters long. The field width is "width". Do
- ** the output.
+ ** the output. Both length and width are in bytes, not characters,
+ ** at this point. If the "!" flag was present on string conversions
+ ** indicating that width and precision should be expressed in characters,
+ ** then the values have been translated prior to reaching this point.
*/
width -= length;
- if( width>0 && !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
- sqlite3StrAccumAppend(pAccum, bufpt, length);
- if( width>0 && flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
+ if( width>0 ){
+ if( !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
+ sqlite3StrAccumAppend(pAccum, bufpt, length);
+ if( flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
+ }else{
+ sqlite3StrAccumAppend(pAccum, bufpt, length);
+ }
if( zExtra ){
- sqlite3_free(zExtra);
+ sqlite3DbFree(pAccum->db, zExtra);
zExtra = 0;
}
}/* End for loop over the format string */
setStrAccumError(p, STRACCUM_TOOBIG);
return N;
}else{
- char *zOld = (p->zText==p->zBase ? 0 : p->zText);
+ char *zOld = isMalloced(p) ? p->zText : 0;
i64 szNew = p->nChar;
szNew += N + 1;
if( szNew+p->nChar<=p->mxAlloc ){
}
if( zNew ){
assert( p->zText!=0 || p->nChar==0 );
- if( zOld==0 && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
+ if( !isMalloced(p) && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
p->zText = zNew;
p->nAlloc = sqlite3DbMallocSize(p->db, zNew);
+ p->printfFlags |= SQLITE_PRINTF_MALLOCED;
}else{
sqlite3StrAccumReset(p);
setStrAccumError(p, STRACCUM_NOMEM);
assert( p->accError==0 || p->nAlloc==0 );
if( p->nChar+N >= p->nAlloc ){
enlargeAndAppend(p,z,N);
- }else{
+ }else if( N ){
assert( p->zText );
p->nChar += N;
memcpy(&p->zText[p->nChar-N], z, N);
** Return a pointer to the resulting string. Return a NULL
** pointer if any kind of error was encountered.
*/
+static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){
+ char *zText;
+ assert( p->mxAlloc>0 && !isMalloced(p) );
+ zText = sqlite3DbMallocRaw(p->db, p->nChar+1 );
+ if( zText ){
+ memcpy(zText, p->zText, p->nChar+1);
+ p->printfFlags |= SQLITE_PRINTF_MALLOCED;
+ }else{
+ setStrAccumError(p, STRACCUM_NOMEM);
+ }
+ p->zText = zText;
+ return zText;
+}
SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){
if( p->zText ){
p->zText[p->nChar] = 0;
- if( p->mxAlloc>0 && p->zText==p->zBase ){
- p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 );
- if( p->zText ){
- memcpy(p->zText, p->zBase, p->nChar+1);
- }else{
- setStrAccumError(p, STRACCUM_NOMEM);
- }
+ if( p->mxAlloc>0 && !isMalloced(p) ){
+ return strAccumFinishRealloc(p);
}
}
return p->zText;
** Reset an StrAccum string. Reclaim all malloced memory.
*/
SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum *p){
- if( p->zText!=p->zBase ){
+ if( isMalloced(p) ){
sqlite3DbFree(p->db, p->zText);
+ p->printfFlags &= ~SQLITE_PRINTF_MALLOCED;
}
p->zText = 0;
}
** allocations will ever occur.
*/
SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){
- p->zText = p->zBase = zBase;
+ p->zText = zBase;
p->db = db;
- p->nChar = 0;
p->nAlloc = n;
p->mxAlloc = mx;
+ p->nChar = 0;
p->accError = 0;
+ p->printfFlags = 0;
}
/*
assert( db!=0 );
sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase),
db->aLimit[SQLITE_LIMIT_LENGTH]);
- sqlite3VXPrintf(&acc, SQLITE_PRINTF_INTERNAL, zFormat, ap);
+ acc.printfFlags = SQLITE_PRINTF_INTERNAL;
+ sqlite3VXPrintf(&acc, zFormat, ap);
z = sqlite3StrAccumFinish(&acc);
if( acc.accError==STRACCUM_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
return z;
}
** Print into memory obtained from sqlite3_malloc(). Omit the internal
** %-conversion extensions.
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vmprintf(const char *zFormat, va_list ap){
char *z;
char zBase[SQLITE_PRINT_BUF_SIZE];
StrAccum acc;
if( sqlite3_initialize() ) return 0;
#endif
sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH);
- sqlite3VXPrintf(&acc, 0, zFormat, ap);
+ sqlite3VXPrintf(&acc, zFormat, ap);
z = sqlite3StrAccumFinish(&acc);
return z;
}
** Print into memory obtained from sqlite3_malloc()(). Omit the internal
** %-conversion extensions.
*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char *zFormat, ...){
+SQLITE_API char *sqlite3_mprintf(const char *zFormat, ...){
va_list ap;
char *z;
#ifndef SQLITE_OMIT_AUTOINIT
**
** sqlite3_vsnprintf() is the varargs version.
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
+SQLITE_API char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
StrAccum acc;
if( n<=0 ) return zBuf;
#ifdef SQLITE_ENABLE_API_ARMOR
}
#endif
sqlite3StrAccumInit(&acc, 0, zBuf, n, 0);
- sqlite3VXPrintf(&acc, 0, zFormat, ap);
- return sqlite3StrAccumFinish(&acc);
+ sqlite3VXPrintf(&acc, zFormat, ap);
+ zBuf[acc.nChar] = 0;
+ return zBuf;
}
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
+SQLITE_API char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
char *z;
va_list ap;
va_start(ap,zFormat);
char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */
sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0);
- sqlite3VXPrintf(&acc, 0, zFormat, ap);
+ sqlite3VXPrintf(&acc, zFormat, ap);
sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode,
sqlite3StrAccumFinish(&acc));
}
/*
** Format and write a message to the log if logging is enabled.
*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...){
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...){
va_list ap; /* Vararg list */
if( sqlite3GlobalConfig.xLog ){
va_start(ap, zFormat);
char zBuf[500];
sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0);
va_start(ap,zFormat);
- sqlite3VXPrintf(&acc, 0, zFormat, ap);
+ sqlite3VXPrintf(&acc, zFormat, ap);
va_end(ap);
sqlite3StrAccumFinish(&acc);
+#ifdef SQLITE_OS_TRACE_PROC
+ {
+ extern void SQLITE_OS_TRACE_PROC(const char *zBuf, int nBuf);
+ SQLITE_OS_TRACE_PROC(zBuf, sizeof(zBuf));
+ }
+#else
fprintf(stdout,"%s", zBuf);
fflush(stdout);
+#endif
}
#endif
** variable-argument wrapper around sqlite3VXPrintf(). The bFlags argument
** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats.
*/
-SQLITE_PRIVATE void sqlite3XPrintf(StrAccum *p, u32 bFlags, const char *zFormat, ...){
+SQLITE_PRIVATE void sqlite3XPrintf(StrAccum *p, const char *zFormat, ...){
va_list ap;
va_start(ap,zFormat);
- sqlite3VXPrintf(p, bFlags, zFormat, ap);
+ sqlite3VXPrintf(p, zFormat, ap);
va_end(ap);
}
sqlite3StrAccumAppend(&acc, p->bLine[i] ? "|-- " : "'-- ", 4);
}
va_start(ap, zFormat);
- sqlite3VXPrintf(&acc, 0, zFormat, ap);
+ sqlite3VXPrintf(&acc, zFormat, ap);
va_end(ap);
+ assert( acc.nChar>0 );
if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1);
sqlite3StrAccumFinish(&acc);
fprintf(stdout,"%s", zBuf);
sqlite3TreeViewLine(p, "%s", zLabel);
}
+/*
+** Generate a human-readable description of a WITH clause.
+*/
+SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView *pView, const With *pWith, u8 moreToFollow){
+ int i;
+ if( pWith==0 ) return;
+ if( pWith->nCte==0 ) return;
+ if( pWith->pOuter ){
+ sqlite3TreeViewLine(pView, "WITH (0x%p, pOuter=0x%p)",pWith,pWith->pOuter);
+ }else{
+ sqlite3TreeViewLine(pView, "WITH (0x%p)", pWith);
+ }
+ if( pWith->nCte>0 ){
+ pView = sqlite3TreeViewPush(pView, 1);
+ for(i=0; i<pWith->nCte; i++){
+ StrAccum x;
+ char zLine[1000];
+ const struct Cte *pCte = &pWith->a[i];
+ sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
+ sqlite3XPrintf(&x, "%s", pCte->zName);
+ if( pCte->pCols && pCte->pCols->nExpr>0 ){
+ char cSep = '(';
+ int j;
+ for(j=0; j<pCte->pCols->nExpr; j++){
+ sqlite3XPrintf(&x, "%c%s", cSep, pCte->pCols->a[j].zName);
+ cSep = ',';
+ }
+ sqlite3XPrintf(&x, ")");
+ }
+ sqlite3XPrintf(&x, " AS");
+ sqlite3StrAccumFinish(&x);
+ sqlite3TreeViewItem(pView, zLine, i<pWith->nCte-1);
+ sqlite3TreeViewSelect(pView, pCte->pSelect, 0);
+ sqlite3TreeViewPop(pView);
+ }
+ sqlite3TreeViewPop(pView);
+ }
+}
+
/*
-** Generate a human-readable description of a the Select object.
+** Generate a human-readable description of a Select object.
*/
SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
int n = 0;
int cnt = 0;
+ if( p==0 ){
+ sqlite3TreeViewLine(pView, "nil-SELECT");
+ return;
+ }
pView = sqlite3TreeViewPush(pView, moreToFollow);
+ if( p->pWith ){
+ sqlite3TreeViewWith(pView, p->pWith, 1);
+ cnt = 1;
+ sqlite3TreeViewPush(pView, 1);
+ }
do{
- sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x",
+#if SELECTTRACE_ENABLED
+ sqlite3TreeViewLine(pView,
+ "SELECT%s%s (%s/%p) selFlags=0x%x nSelectRow=%d",
+ ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""),
+ ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""),
+ p->zSelName, p, p->selFlags,
+ (int)p->nSelectRow
+ );
+#else
+ sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x nSelectRow=%d",
((p->selFlags & SF_Distinct) ? " DISTINCT" : ""),
- ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags
+ ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags,
+ (int)p->nSelectRow
);
+#endif
if( cnt++ ) sqlite3TreeViewPop(pView);
if( p->pPrior ){
n = 1000;
if( p->pHaving ) n++;
if( p->pOrderBy ) n++;
if( p->pLimit ) n++;
- if( p->pOffset ) n++;
}
sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set");
if( p->pSrc && p->pSrc->nSrc ){
StrAccum x;
char zLine[100];
sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
- sqlite3XPrintf(&x, 0, "{%d,*}", pItem->iCursor);
+ sqlite3XPrintf(&x, "{%d,*}", pItem->iCursor);
if( pItem->zDatabase ){
- sqlite3XPrintf(&x, 0, " %s.%s", pItem->zDatabase, pItem->zName);
+ sqlite3XPrintf(&x, " %s.%s", pItem->zDatabase, pItem->zName);
}else if( pItem->zName ){
- sqlite3XPrintf(&x, 0, " %s", pItem->zName);
+ sqlite3XPrintf(&x, " %s", pItem->zName);
}
if( pItem->pTab ){
- sqlite3XPrintf(&x, 0, " tabname=%Q", pItem->pTab->zName);
+ sqlite3XPrintf(&x, " tabname=%Q", pItem->pTab->zName);
}
if( pItem->zAlias ){
- sqlite3XPrintf(&x, 0, " (AS %s)", pItem->zAlias);
+ sqlite3XPrintf(&x, " (AS %s)", pItem->zAlias);
}
if( pItem->fg.jointype & JT_LEFT ){
- sqlite3XPrintf(&x, 0, " LEFT-JOIN");
+ sqlite3XPrintf(&x, " LEFT-JOIN");
}
sqlite3StrAccumFinish(&x);
sqlite3TreeViewItem(pView, zLine, i<p->pSrc->nSrc-1);
}
if( p->pLimit ){
sqlite3TreeViewItem(pView, "LIMIT", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pLimit, 0);
- sqlite3TreeViewPop(pView);
- }
- if( p->pOffset ){
- sqlite3TreeViewItem(pView, "OFFSET", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pOffset, 0);
+ sqlite3TreeViewExpr(pView, p->pLimit->pLeft, p->pLimit->pRight!=0);
+ if( p->pLimit->pRight ){
+ sqlite3TreeViewItem(pView, "OFFSET", (n--)>0);
+ sqlite3TreeViewExpr(pView, p->pLimit->pRight, 0);
+ sqlite3TreeViewPop(pView);
+ }
sqlite3TreeViewPop(pView);
}
if( p->pPrior ){
SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){
const char *zBinOp = 0; /* Binary operator */
const char *zUniOp = 0; /* Unary operator */
- char zFlgs[30];
+ char zFlgs[60];
pView = sqlite3TreeViewPush(pView, moreToFollow);
if( pExpr==0 ){
sqlite3TreeViewLine(pView, "nil");
return;
}
if( pExpr->flags ){
- sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x",pExpr->flags);
+ if( ExprHasProperty(pExpr, EP_FromJoin) ){
+ sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x iRJT=%d",
+ pExpr->flags, pExpr->iRightJoinTable);
+ }else{
+ sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x",pExpr->flags);
+ }
}else{
zFlgs[0] = 0;
}
sqlite3TreeViewLine(pView,"NULL");
break;
}
+ case TK_TRUEFALSE: {
+ sqlite3TreeViewLine(pView,
+ sqlite3ExprTruthValue(pExpr) ? "TRUE" : "FALSE");
+ break;
+ }
#ifndef SQLITE_OMIT_BLOB_LITERAL
case TK_BLOB: {
sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken);
case TK_ISNULL: zUniOp = "ISNULL"; break;
case TK_NOTNULL: zUniOp = "NOTNULL"; break;
+ case TK_TRUTH: {
+ int x;
+ const char *azOp[] = {
+ "IS-FALSE", "IS-TRUE", "IS-NOT-FALSE", "IS-NOT-TRUE"
+ };
+ assert( pExpr->op2==TK_IS || pExpr->op2==TK_ISNOT );
+ assert( pExpr->pRight );
+ assert( pExpr->pRight->op==TK_TRUEFALSE );
+ x = (pExpr->op2==TK_ISNOT)*2 + sqlite3ExprTruthValue(pExpr->pRight);
+ zUniOp = azOp[x];
+ break;
+ }
+
+ case TK_SPAN: {
+ sqlite3TreeViewLine(pView, "SPAN %Q", pExpr->u.zToken);
+ sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
+ break;
+ }
+
case TK_COLLATE: {
sqlite3TreeViewLine(pView, "COLLATE %Q", pExpr->u.zToken);
sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
}
#ifndef SQLITE_OMIT_SUBQUERY
case TK_EXISTS: {
- sqlite3TreeViewLine(pView, "EXISTS-expr");
+ sqlite3TreeViewLine(pView, "EXISTS-expr flags=0x%x", pExpr->flags);
sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
break;
}
case TK_SELECT: {
- sqlite3TreeViewLine(pView, "SELECT-expr");
+ sqlite3TreeViewLine(pView, "SELECT-expr flags=0x%x", pExpr->flags);
sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
break;
}
case TK_IN: {
- sqlite3TreeViewLine(pView, "IN");
+ sqlite3TreeViewLine(pView, "IN flags=0x%x", pExpr->flags);
sqlite3TreeViewExpr(pView, pExpr->pLeft, 1);
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
break;
}
#endif
+ case TK_MATCH: {
+ sqlite3TreeViewLine(pView, "MATCH {%d:%d}%s",
+ pExpr->iTable, pExpr->iColumn, zFlgs);
+ sqlite3TreeViewExpr(pView, pExpr->pRight, 0);
+ break;
+ }
+ case TK_VECTOR: {
+ sqlite3TreeViewBareExprList(pView, pExpr->x.pList, "VECTOR");
+ break;
+ }
+ case TK_SELECT_COLUMN: {
+ sqlite3TreeViewLine(pView, "SELECT-COLUMN %d", pExpr->iColumn);
+ sqlite3TreeViewSelect(pView, pExpr->pLeft->x.pSelect, 0);
+ break;
+ }
+ case TK_IF_NULL_ROW: {
+ sqlite3TreeViewLine(pView, "IF-NULL-ROW %d", pExpr->iTable);
+ sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
+ break;
+ }
default: {
sqlite3TreeViewLine(pView, "op=%d", pExpr->op);
break;
sqlite3TreeViewPop(pView);
}
+
/*
** Generate a human-readable explanation of an expression list.
*/
-SQLITE_PRIVATE void sqlite3TreeViewExprList(
+SQLITE_PRIVATE void sqlite3TreeViewBareExprList(
TreeView *pView,
const ExprList *pList,
- u8 moreToFollow,
const char *zLabel
){
- int i;
- pView = sqlite3TreeViewPush(pView, moreToFollow);
if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST";
if( pList==0 ){
sqlite3TreeViewLine(pView, "%s (empty)", zLabel);
}else{
+ int i;
sqlite3TreeViewLine(pView, "%s", zLabel);
for(i=0; i<pList->nExpr; i++){
int j = pList->a[i].u.x.iOrderByCol;
- if( j ){
+ char *zName = pList->a[i].zName;
+ if( j || zName ){
sqlite3TreeViewPush(pView, 0);
+ }
+ if( zName ){
+ sqlite3TreeViewLine(pView, "AS %s", zName);
+ }
+ if( j ){
sqlite3TreeViewLine(pView, "iOrderByCol=%d", j);
}
sqlite3TreeViewExpr(pView, pList->a[i].pExpr, i<pList->nExpr-1);
- if( j ) sqlite3TreeViewPop(pView);
+ if( j || zName ){
+ sqlite3TreeViewPop(pView);
+ }
}
}
+}
+SQLITE_PRIVATE void sqlite3TreeViewExprList(
+ TreeView *pView,
+ const ExprList *pList,
+ u8 moreToFollow,
+ const char *zLabel
+){
+ pView = sqlite3TreeViewPush(pView, moreToFollow);
+ sqlite3TreeViewBareExprList(pView, pList, zLabel);
sqlite3TreeViewPop(pView);
}
/*
** Return N random bytes.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *pBuf){
+SQLITE_API void sqlite3_randomness(int N, void *pBuf){
unsigned char t;
unsigned char *zBuf = pBuf;
sqlite3_mutex_leave(mutex);
}
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
/*
** For testing purposes, we sometimes want to preserve the state of
** PRNG and restore the PRNG to its saved state at a later time, or
sizeof(sqlite3Prng)
);
}
-#endif /* SQLITE_OMIT_BUILTIN_TEST */
+#endif /* SQLITE_UNTESTABLE */
/************** End of random.c **********************************************/
/************** Begin file threads.c *****************************************/
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
memset(p, 0, sizeof(*p));
p->xTask = xTask;
p->pIn = pIn;
int rc;
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->done ){
*ppOut = p->pOut;
rc = SQLITE_OK;
assert( xTask!=0 );
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
/* If the SQLITE_TESTCTRL_FAULT_INSTALL callback is registered to a
** function that returns SQLITE_ERROR when passed the argument 200, that
** forces worker threads to run sequentially and deterministically
BOOL bRc;
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->xTask==0 ){
/* assert( p->id==GetCurrentThreadId() ); */
rc = WAIT_OBJECT_0;
assert( xTask!=0 );
*ppThread = 0;
p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
if( (SQLITE_PTR_TO_INT(p)/17)&1 ){
p->xTask = xTask;
p->pIn = pIn;
SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){
assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM;
+ if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
if( p->xTask ){
*ppOut = p->xTask(p->pIn);
}else{
#if defined(SQLITE_TEST)
{
void *pTstAlloc = sqlite3Malloc(10);
- if (!pTstAlloc) return SQLITE_NOMEM;
+ if (!pTstAlloc) return SQLITE_NOMEM_BKPT;
sqlite3_free(pTstAlloc);
}
#endif
/* #include <assert.h> */
/* #include "vdbeInt.h" */
-#ifndef SQLITE_AMALGAMATION
+#if !defined(SQLITE_AMALGAMATION) && SQLITE_BYTEORDER==0
/*
** The following constant value is used by the SQLITE_BIGENDIAN and
** SQLITE_LITTLEENDIAN macros.
*/
SQLITE_PRIVATE const int sqlite3one = 1;
-#endif /* SQLITE_AMALGAMATION */
+#endif /* SQLITE_AMALGAMATION && SQLITE_BYTEORDER==0 */
/*
** This lookup table is used to help decode the first byte of
rc = sqlite3VdbeMemMakeWriteable(pMem);
if( rc!=SQLITE_OK ){
assert( rc==SQLITE_NOMEM );
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
zIn = (u8*)pMem->z;
zTerm = &zIn[pMem->n&~1];
zTerm = &zIn[pMem->n];
zOut = sqlite3DbMallocRaw(pMem->db, len);
if( !zOut ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
z = zOut;
c = pMem->flags;
sqlite3VdbeMemRelease(pMem);
- pMem->flags = MEM_Str|MEM_Term|(c&MEM_AffMask);
+ pMem->flags = MEM_Str|MEM_Term|(c&(MEM_AffMask|MEM_Subtype));
pMem->enc = desiredEnc;
pMem->z = (char*)zOut;
pMem->zMalloc = pMem->z;
#endif
return SQLITE_OK;
}
+#endif /* SQLITE_OMIT_UTF16 */
+#ifndef SQLITE_OMIT_UTF16
/*
** This routine checks for a byte-order mark at the beginning of the
** UTF-16 string stored in *pMem. If one is present, it is removed and
** Return whatever integer value the test callback returns, or return
** SQLITE_OK if no test callback is installed.
*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
SQLITE_PRIVATE int sqlite3FaultSim(int iTest){
int (*xCallback)(int) = sqlite3GlobalConfig.xTestCallback;
return xCallback ? xCallback(iTest) : SQLITE_OK;
return 0x3fffffff & (int)strlen(z);
}
+/*
+** Return the declared type of a column. Or return zDflt if the column
+** has no declared type.
+**
+** The column type is an extra string stored after the zero-terminator on
+** the column name if and only if the COLFLAG_HASTYPE flag is set.
+*/
+SQLITE_PRIVATE char *sqlite3ColumnType(Column *pCol, char *zDflt){
+ if( (pCol->colFlags & COLFLAG_HASTYPE)==0 ) return zDflt;
+ return pCol->zName + strlen(pCol->zName) + 1;
+}
+
+/*
+** Helper function for sqlite3Error() - called rarely. Broken out into
+** a separate routine to avoid unnecessary register saves on entry to
+** sqlite3Error().
+*/
+static SQLITE_NOINLINE void sqlite3ErrorFinish(sqlite3 *db, int err_code){
+ if( db->pErr ) sqlite3ValueSetNull(db->pErr);
+ sqlite3SystemError(db, err_code);
+}
+
/*
** Set the current error code to err_code and clear any prior error message.
+** Also set iSysErrno (by calling sqlite3System) if the err_code indicates
+** that would be appropriate.
*/
SQLITE_PRIVATE void sqlite3Error(sqlite3 *db, int err_code){
assert( db!=0 );
db->errCode = err_code;
- if( db->pErr ) sqlite3ValueSetNull(db->pErr);
+ if( err_code || db->pErr ) sqlite3ErrorFinish(db, err_code);
+}
+
+/*
+** Load the sqlite3.iSysErrno field if that is an appropriate thing
+** to do based on the SQLite error code in rc.
+*/
+SQLITE_PRIVATE void sqlite3SystemError(sqlite3 *db, int rc){
+ if( rc==SQLITE_IOERR_NOMEM ) return;
+ rc &= 0xff;
+ if( rc==SQLITE_CANTOPEN || rc==SQLITE_IOERR ){
+ db->iSysErrno = sqlite3OsGetLastError(db->pVfs);
+ }
}
/*
SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3 *db, int err_code, const char *zFormat, ...){
assert( db!=0 );
db->errCode = err_code;
+ sqlite3SystemError(db, err_code);
if( zFormat==0 ){
sqlite3Error(db, err_code);
}else if( db->pErr || (db->pErr = sqlite3ValueNew(db))!=0 ){
** brackets from around identifiers. For example: "[a-b-c]" becomes
** "a-b-c".
*/
-SQLITE_PRIVATE int sqlite3Dequote(char *z){
+SQLITE_PRIVATE void sqlite3Dequote(char *z){
char quote;
int i, j;
- if( z==0 ) return -1;
+ if( z==0 ) return;
quote = z[0];
- switch( quote ){
- case '\'': break;
- case '"': break;
- case '`': break; /* For MySQL compatibility */
- case '[': quote = ']'; break; /* For MS SqlServer compatibility */
- default: return -1;
- }
+ if( !sqlite3Isquote(quote) ) return;
+ if( quote=='[' ) quote = ']';
for(i=1, j=0;; i++){
assert( z[i] );
if( z[i]==quote ){
}
}
z[j] = 0;
- return j;
+}
+
+/*
+** Generate a Token object from a string
+*/
+SQLITE_PRIVATE void sqlite3TokenInit(Token *p, char *z){
+ p->z = z;
+ p->n = sqlite3Strlen30(z);
}
/* Convenient short-hand */
** case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *zLeft, const char *zRight){
- register unsigned char *a, *b;
+SQLITE_API int sqlite3_stricmp(const char *zLeft, const char *zRight){
if( zLeft==0 ){
return zRight ? -1 : 0;
}else if( zRight==0 ){
return 1;
}
+ return sqlite3StrICmp(zLeft, zRight);
+}
+SQLITE_PRIVATE int sqlite3StrICmp(const char *zLeft, const char *zRight){
+ unsigned char *a, *b;
+ int c;
a = (unsigned char *)zLeft;
b = (unsigned char *)zRight;
- while( *a!=0 && UpperToLower[*a]==UpperToLower[*b]){ a++; b++; }
- return UpperToLower[*a] - UpperToLower[*b];
+ for(;;){
+ c = (int)UpperToLower[*a] - (int)UpperToLower[*b];
+ if( c || *a==0 ) break;
+ a++;
+ b++;
+ }
+ return c;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){
+SQLITE_API int sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){
register unsigned char *a, *b;
if( zLeft==0 ){
return zRight ? -1 : 0;
return N<0 ? 0 : UpperToLower[*a] - UpperToLower[*b];
}
+/*
+** Compute 10 to the E-th power. Examples: E==1 results in 10.
+** E==2 results in 100. E==50 results in 1.0e50.
+**
+** This routine only works for values of E between 1 and 341.
+*/
+static LONGDOUBLE_TYPE sqlite3Pow10(int E){
+#if defined(_MSC_VER)
+ static const LONGDOUBLE_TYPE x[] = {
+ 1.0e+001,
+ 1.0e+002,
+ 1.0e+004,
+ 1.0e+008,
+ 1.0e+016,
+ 1.0e+032,
+ 1.0e+064,
+ 1.0e+128,
+ 1.0e+256
+ };
+ LONGDOUBLE_TYPE r = 1.0;
+ int i;
+ assert( E>=0 && E<=307 );
+ for(i=0; E!=0; i++, E >>=1){
+ if( E & 1 ) r *= x[i];
+ }
+ return r;
+#else
+ LONGDOUBLE_TYPE x = 10.0;
+ LONGDOUBLE_TYPE r = 1.0;
+ while(1){
+ if( E & 1 ) r *= x;
+ E >>= 1;
+ if( E==0 ) break;
+ x *= x;
+ }
+ return r;
+#endif
+}
+
/*
** The string z[] is an text representation of a real number.
** Convert this string to a double and write it into *pResult.
int eValid = 1; /* True exponent is either not used or is well-formed */
double result;
int nDigits = 0;
- int nonNum = 0;
+ int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */
assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE );
*pResult = 0.0; /* Default return value, in case of an error */
assert( SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 );
for(i=3-enc; i<length && z[i]==0; i+=2){}
nonNum = i<length;
- zEnd = z+i+enc-3;
+ zEnd = &z[i^1];
z += (enc&1);
}
z+=incr;
}
- /* skip leading zeroes */
- while( z<zEnd && z[0]=='0' ) z+=incr, nDigits++;
-
/* copy max significant digits to significand */
while( z<zEnd && sqlite3Isdigit(*z) && s<((LARGEST_INT64-9)/10) ){
s = s*10 + (*z - '0');
- z+=incr, nDigits++;
+ z+=incr; nDigits++;
}
/* skip non-significant significand digits
** (increase exponent by d to shift decimal left) */
- while( z<zEnd && sqlite3Isdigit(*z) ) z+=incr, nDigits++, d++;
+ while( z<zEnd && sqlite3Isdigit(*z) ){ z+=incr; nDigits++; d++; }
if( z>=zEnd ) goto do_atof_calc;
/* if decimal point is present */
z+=incr;
/* copy digits from after decimal to significand
** (decrease exponent by d to shift decimal right) */
- while( z<zEnd && sqlite3Isdigit(*z) && s<((LARGEST_INT64-9)/10) ){
- s = s*10 + (*z - '0');
- z+=incr, nDigits++, d--;
+ while( z<zEnd && sqlite3Isdigit(*z) ){
+ if( s<((LARGEST_INT64-9)/10) ){
+ s = s*10 + (*z - '0');
+ d--;
+ }
+ z+=incr; nDigits++;
}
- /* skip non-significant digits */
- while( z<zEnd && sqlite3Isdigit(*z) ) z+=incr, nDigits++;
}
if( z>=zEnd ) goto do_atof_calc;
if( *z=='e' || *z=='E' ){
z+=incr;
eValid = 0;
- if( z>=zEnd ) goto do_atof_calc;
+
+ /* This branch is needed to avoid a (harmless) buffer overread. The
+ ** special comment alerts the mutation tester that the correct answer
+ ** is obtained even if the branch is omitted */
+ if( z>=zEnd ) goto do_atof_calc; /*PREVENTS-HARMLESS-OVERREAD*/
+
/* get sign of exponent */
if( *z=='-' ){
esign = -1;
}
/* skip trailing spaces */
- if( nDigits && eValid ){
- while( z<zEnd && sqlite3Isspace(*z) ) z+=incr;
- }
+ while( z<zEnd && sqlite3Isspace(*z) ) z+=incr;
do_atof_calc:
/* adjust exponent by d, and update sign */
esign = 1;
}
- /* if 0 significand */
- if( !s ) {
- /* In the IEEE 754 standard, zero is signed.
- ** Add the sign if we've seen at least one digit */
- result = (sign<0 && nDigits) ? -(double)0 : (double)0;
+ if( s==0 ) {
+ /* In the IEEE 754 standard, zero is signed. */
+ result = sign<0 ? -(double)0 : (double)0;
} else {
- /* attempt to reduce exponent */
- if( esign>0 ){
- while( s<(LARGEST_INT64/10) && e>0 ) e--,s*=10;
- }else{
- while( !(s%10) && e>0 ) e--,s/=10;
+ /* Attempt to reduce exponent.
+ **
+ ** Branches that are not required for the correct answer but which only
+ ** help to obtain the correct answer faster are marked with special
+ ** comments, as a hint to the mutation tester.
+ */
+ while( e>0 ){ /*OPTIMIZATION-IF-TRUE*/
+ if( esign>0 ){
+ if( s>=(LARGEST_INT64/10) ) break; /*OPTIMIZATION-IF-FALSE*/
+ s *= 10;
+ }else{
+ if( s%10!=0 ) break; /*OPTIMIZATION-IF-FALSE*/
+ s /= 10;
+ }
+ e--;
}
/* adjust the sign of significand */
s = sign<0 ? -s : s;
- /* if exponent, scale significand as appropriate
- ** and store in result. */
- if( e ){
- LONGDOUBLE_TYPE scale = 1.0;
+ if( e==0 ){ /*OPTIMIZATION-IF-TRUE*/
+ result = (double)s;
+ }else{
/* attempt to handle extremely small/large numbers better */
- if( e>307 && e<342 ){
- while( e%308 ) { scale *= 1.0e+1; e -= 1; }
- if( esign<0 ){
- result = s / scale;
- result /= 1.0e+308;
- }else{
- result = s * scale;
- result *= 1.0e+308;
- }
- }else if( e>=342 ){
- if( esign<0 ){
- result = 0.0*s;
- }else{
- result = 1e308*1e308*s; /* Infinity */
+ if( e>307 ){ /*OPTIMIZATION-IF-TRUE*/
+ if( e<342 ){ /*OPTIMIZATION-IF-TRUE*/
+ LONGDOUBLE_TYPE scale = sqlite3Pow10(e-308);
+ if( esign<0 ){
+ result = s / scale;
+ result /= 1.0e+308;
+ }else{
+ result = s * scale;
+ result *= 1.0e+308;
+ }
+ }else{ assert( e>=342 );
+ if( esign<0 ){
+ result = 0.0*s;
+ }else{
+#ifdef INFINITY
+ result = INFINITY*s;
+#else
+ result = 1e308*1e308*s; /* Infinity */
+#endif
+ }
}
}else{
- /* 1.0e+22 is the largest power of 10 than can be
- ** represented exactly. */
- while( e%22 ) { scale *= 1.0e+1; e -= 1; }
- while( e>0 ) { scale *= 1.0e+22; e -= 22; }
+ LONGDOUBLE_TYPE scale = sqlite3Pow10(e);
if( esign<0 ){
result = s / scale;
}else{
result = s * scale;
}
}
- } else {
- result = (double)s;
}
}
*pResult = result;
/* return true if number and no extra non-whitespace chracters after */
- return z>=zEnd && nDigits>0 && eValid && nonNum==0;
+ return z==zEnd && nDigits>0 && eValid && nonNum==0;
#else
return !sqlite3Atoi64(z, pResult, length, enc);
#endif /* SQLITE_OMIT_FLOATING_POINT */
** Convert zNum to a 64-bit signed integer. zNum must be decimal. This
** routine does *not* accept hexadecimal notation.
**
-** If the zNum value is representable as a 64-bit twos-complement
-** integer, then write that value into *pNum and return 0.
-**
-** If zNum is exactly 9223372036854775808, return 2. This special
-** case is broken out because while 9223372036854775808 cannot be a
-** signed 64-bit integer, its negative -9223372036854775808 can be.
+** Returns:
**
-** If zNum is too big for a 64-bit integer and is not
-** 9223372036854775808 or if zNum contains any non-numeric text,
-** then return 1.
+** 0 Successful transformation. Fits in a 64-bit signed integer.
+** 1 Excess non-space text after the integer value
+** 2 Integer too large for a 64-bit signed integer or is malformed
+** 3 Special case of 9223372036854775808
**
** length is the number of bytes in the string (bytes, not characters).
** The string is not necessarily zero-terminated. The encoding is
int neg = 0; /* assume positive */
int i;
int c = 0;
- int nonNum = 0;
+ int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */
+ int rc; /* Baseline return code */
const char *zStart;
const char *zEnd = zNum + length;
assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE );
assert( SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 );
for(i=3-enc; i<length && zNum[i]==0; i+=2){}
nonNum = i<length;
- zEnd = zNum+i+enc-3;
+ zEnd = &zNum[i^1];
zNum += (enc&1);
}
while( zNum<zEnd && sqlite3Isspace(*zNum) ) zNum+=incr;
for(i=0; &zNum[i]<zEnd && (c=zNum[i])>='0' && c<='9'; i+=incr){
u = u*10 + c - '0';
}
+ testcase( i==18*incr );
+ testcase( i==19*incr );
+ testcase( i==20*incr );
if( u>LARGEST_INT64 ){
+ /* This test and assignment is needed only to suppress UB warnings
+ ** from clang and -fsanitize=undefined. This test and assignment make
+ ** the code a little larger and slower, and no harm comes from omitting
+ ** them, but we must appaise the undefined-behavior pharisees. */
*pNum = neg ? SMALLEST_INT64 : LARGEST_INT64;
}else if( neg ){
*pNum = -(i64)u;
}else{
*pNum = (i64)u;
}
- testcase( i==18 );
- testcase( i==19 );
- testcase( i==20 );
- if( (c!=0 && &zNum[i]<zEnd) || (i==0 && zStart==zNum) || i>19*incr || nonNum ){
- /* zNum is empty or contains non-numeric text or is longer
- ** than 19 digits (thus guaranteeing that it is too large) */
- return 1;
- }else if( i<19*incr ){
+ rc = 0;
+ if( (i==0 && zStart==zNum) /* No digits */
+ || nonNum /* UTF16 with high-order bytes non-zero */
+ ){
+ rc = 1;
+ }else if( &zNum[i]<zEnd ){ /* Extra bytes at the end */
+ int jj = i;
+ do{
+ if( !sqlite3Isspace(zNum[jj]) ){
+ rc = 1; /* Extra non-space text after the integer */
+ break;
+ }
+ jj += incr;
+ }while( &zNum[jj]<zEnd );
+ }
+ if( i<19*incr ){
/* Less than 19 digits, so we know that it fits in 64 bits */
assert( u<=LARGEST_INT64 );
- return 0;
+ return rc;
}else{
/* zNum is a 19-digit numbers. Compare it against 9223372036854775808. */
- c = compare2pow63(zNum, incr);
+ c = i>19*incr ? 1 : compare2pow63(zNum, incr);
if( c<0 ){
/* zNum is less than 9223372036854775808 so it fits */
assert( u<=LARGEST_INT64 );
- return 0;
- }else if( c>0 ){
- /* zNum is greater than 9223372036854775808 so it overflows */
- return 1;
+ return rc;
}else{
- /* zNum is exactly 9223372036854775808. Fits if negative. The
- ** special case 2 overflow if positive */
- assert( u-1==LARGEST_INT64 );
- return neg ? 0 : 2;
+ *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64;
+ if( c>0 ){
+ /* zNum is greater than 9223372036854775808 so it overflows */
+ return 2;
+ }else{
+ /* zNum is exactly 9223372036854775808. Fits if negative. The
+ ** special case 2 overflow if positive */
+ assert( u-1==LARGEST_INT64 );
+ return neg ? rc : 3;
+ }
}
}
}
** Returns:
**
** 0 Successful transformation. Fits in a 64-bit signed integer.
-** 1 Integer too large for a 64-bit signed integer or is malformed
-** 2 Special case of 9223372036854775808
+** 1 Excess text after the integer value
+** 2 Integer too large for a 64-bit signed integer or is malformed
+** 3 Special case of 9223372036854775808
*/
SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){
#ifndef SQLITE_OMIT_HEX_INTEGER
if( z[0]=='0'
&& (z[1]=='x' || z[1]=='X')
- && sqlite3Isxdigit(z[2])
){
u64 u = 0;
int i, k;
u = u*16 + sqlite3HexToInt(z[k]);
}
memcpy(pOut, &u, 8);
- return (z[k]==0 && k-i<=16) ? 0 : 1;
+ return (z[k]==0 && k-i<=16) ? 0 : 2;
}else
#endif /* SQLITE_OMIT_HEX_INTEGER */
{
}
}
#endif
+ if( !sqlite3Isdigit(zNum[0]) ) return 0;
while( zNum[0]=='0' ) zNum++;
for(i=0; i<11 && (c = zNum[i] - '0')>=0 && c<=9; i++){
v = v*10 + c;
/* a: p0<<28 | p2<<14 | p4 (unmasked) */
if (!(a&0x80))
{
- /* we can skip these cause they were (effectively) done above in calc'ing s */
+ /* we can skip these cause they were (effectively) done above
+ ** while calculating s */
/* a &= (0x7f<<28)|(0x7f<<14)|(0x7f); */
/* b &= (0x7f<<14)|(0x7f); */
b = b<<7;
*/
SQLITE_PRIVATE int sqlite3VarintLen(u64 v){
int i;
- for(i=1; (v >>= 7)!=0; i++){ assert( i<9 ); }
+ for(i=1; (v >>= 7)!=0; i++){ assert( i<10 ); }
return i;
}
u32 x;
memcpy(&x,p,4);
return x;
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(__GNUC__) && GCC_VERSION>=4003000
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
u32 x;
memcpy(&x,p,4);
return __builtin_bswap32(x);
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(_MSC_VER) && _MSC_VER>=1300
+#elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
u32 x;
memcpy(&x,p,4);
return _byteswap_ulong(x);
SQLITE_PRIVATE void sqlite3Put4byte(unsigned char *p, u32 v){
#if SQLITE_BYTEORDER==4321
memcpy(p,&v,4);
-#elif SQLITE_BYTEORDER==1234 && defined(__GNUC__) && GCC_VERSION>=4003000
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
u32 x = __builtin_bswap32(v);
memcpy(p,&x,4);
-#elif SQLITE_BYTEORDER==1234 && defined(_MSC_VER) && _MSC_VER>=1300
+#elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
u32 x = _byteswap_ulong(v);
memcpy(p,&x,4);
#else
char *zBlob;
int i;
- zBlob = (char *)sqlite3DbMallocRaw(db, n/2 + 1);
+ zBlob = (char *)sqlite3DbMallocRawNN(db, n/2 + 1);
n--;
if( zBlob ){
for(i=0; i<n; i+=2){
** overflow, leave *pA unchanged and return 1.
*/
SQLITE_PRIVATE int sqlite3AddInt64(i64 *pA, i64 iB){
+#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER)
+ return __builtin_add_overflow(*pA, iB, pA);
+#else
i64 iA = *pA;
testcase( iA==0 ); testcase( iA==1 );
testcase( iB==-1 ); testcase( iB==0 );
}
*pA += iB;
return 0;
+#endif
}
SQLITE_PRIVATE int sqlite3SubInt64(i64 *pA, i64 iB){
+#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER)
+ return __builtin_sub_overflow(*pA, iB, pA);
+#else
testcase( iB==SMALLEST_INT64+1 );
if( iB==SMALLEST_INT64 ){
testcase( (*pA)==(-1) ); testcase( (*pA)==0 );
}else{
return sqlite3AddInt64(pA, -iB);
}
+#endif
}
-#define TWOPOWER32 (((i64)1)<<32)
-#define TWOPOWER31 (((i64)1)<<31)
SQLITE_PRIVATE int sqlite3MulInt64(i64 *pA, i64 iB){
+#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER)
+ return __builtin_mul_overflow(*pA, iB, pA);
+#else
i64 iA = *pA;
- i64 iA1, iA0, iB1, iB0, r;
-
- iA1 = iA/TWOPOWER32;
- iA0 = iA % TWOPOWER32;
- iB1 = iB/TWOPOWER32;
- iB0 = iB % TWOPOWER32;
- if( iA1==0 ){
- if( iB1==0 ){
- *pA *= iB;
- return 0;
- }
- r = iA0*iB1;
- }else if( iB1==0 ){
- r = iA1*iB0;
- }else{
- /* If both iA1 and iB1 are non-zero, overflow will result */
- return 1;
- }
- testcase( r==(-TWOPOWER31)-1 );
- testcase( r==(-TWOPOWER31) );
- testcase( r==TWOPOWER31 );
- testcase( r==TWOPOWER31-1 );
- if( r<(-TWOPOWER31) || r>=TWOPOWER31 ) return 1;
- r *= TWOPOWER32;
- if( sqlite3AddInt64(&r, iA0*iB0) ) return 1;
- *pA = r;
+ if( iB>0 ){
+ if( iA>LARGEST_INT64/iB ) return 1;
+ if( iA<SMALLEST_INT64/iB ) return 1;
+ }else if( iB<0 ){
+ if( iA>0 ){
+ if( iB<SMALLEST_INT64/iA ) return 1;
+ }else if( iA<0 ){
+ if( iB==SMALLEST_INT64 ) return 1;
+ if( iA==SMALLEST_INT64 ) return 1;
+ if( -iA>LARGEST_INT64/-iB ) return 1;
+ }
+ }
+ *pA = iA*iB;
return 0;
+#endif
}
/*
if( x<2 ) return 0;
while( x<8 ){ y -= 10; x <<= 1; }
}else{
- while( x>255 ){ y += 40; x >>= 4; }
+#if GCC_VERSION>=5004000
+ int i = 60 - __builtin_clzll(x);
+ y += i*10;
+ x >>= i;
+#else
+ while( x>255 ){ y += 40; x >>= 4; } /*OPTIMIZATION-IF-TRUE*/
while( x>15 ){ y += 10; x >>= 1; }
+#endif
}
return a[x&7] + y - 10;
}
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
+#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
+ defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \
+ defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
/*
** Convert a LogEst into an integer.
+**
+** Note that this routine is only used when one or more of various
+** non-standard compile-time options is enabled.
*/
SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst x){
u64 n;
- if( x<10 ) return 1;
n = x%10;
x /= 10;
if( n>=5 ) n -= 2;
else if( n>=1 ) n -= 1;
- if( x>=3 ){
- return x>60 ? (u64)LARGEST_INT64 : (n+8)<<(x-3);
- }
- return (n+8)>>(3-x);
+#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
+ defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
+ if( x>60 ) return (u64)LARGEST_INT64;
+#else
+ /* If only SQLITE_ENABLE_STAT3_OR_STAT4 is on, then the largest input
+ ** possible to this routine is 310, resulting in a maximum x of 31 */
+ assert( x<=60 );
+#endif
+ return x>=3 ? (n+8)<<(x-3) : (n+8)>>(3-x);
+}
+#endif /* defined SCANSTAT or STAT4 or ESTIMATED_ROWS */
+
+/*
+** Add a new name/number pair to a VList. This might require that the
+** VList object be reallocated, so return the new VList. If an OOM
+** error occurs, the original VList returned and the
+** db->mallocFailed flag is set.
+**
+** A VList is really just an array of integers. To destroy a VList,
+** simply pass it to sqlite3DbFree().
+**
+** The first integer is the number of integers allocated for the whole
+** VList. The second integer is the number of integers actually used.
+** Each name/number pair is encoded by subsequent groups of 3 or more
+** integers.
+**
+** Each name/number pair starts with two integers which are the numeric
+** value for the pair and the size of the name/number pair, respectively.
+** The text name overlays one or more following integers. The text name
+** is always zero-terminated.
+**
+** Conceptually:
+**
+** struct VList {
+** int nAlloc; // Number of allocated slots
+** int nUsed; // Number of used slots
+** struct VListEntry {
+** int iValue; // Value for this entry
+** int nSlot; // Slots used by this entry
+** // ... variable name goes here
+** } a[0];
+** }
+**
+** During code generation, pointers to the variable names within the
+** VList are taken. When that happens, nAlloc is set to zero as an
+** indication that the VList may never again be enlarged, since the
+** accompanying realloc() would invalidate the pointers.
+*/
+SQLITE_PRIVATE VList *sqlite3VListAdd(
+ sqlite3 *db, /* The database connection used for malloc() */
+ VList *pIn, /* The input VList. Might be NULL */
+ const char *zName, /* Name of symbol to add */
+ int nName, /* Bytes of text in zName */
+ int iVal /* Value to associate with zName */
+){
+ int nInt; /* number of sizeof(int) objects needed for zName */
+ char *z; /* Pointer to where zName will be stored */
+ int i; /* Index in pIn[] where zName is stored */
+
+ nInt = nName/4 + 3;
+ assert( pIn==0 || pIn[0]>=3 ); /* Verify ok to add new elements */
+ if( pIn==0 || pIn[1]+nInt > pIn[0] ){
+ /* Enlarge the allocation */
+ int nAlloc = (pIn ? pIn[0]*2 : 10) + nInt;
+ VList *pOut = sqlite3DbRealloc(db, pIn, nAlloc*sizeof(int));
+ if( pOut==0 ) return pIn;
+ if( pIn==0 ) pOut[1] = 2;
+ pIn = pOut;
+ pIn[0] = nAlloc;
+ }
+ i = pIn[1];
+ pIn[i] = iVal;
+ pIn[i+1] = nInt;
+ z = (char*)&pIn[i+2];
+ pIn[1] = i+nInt;
+ assert( pIn[1]<=pIn[0] );
+ memcpy(z, zName, nName);
+ z[nName] = 0;
+ return pIn;
+}
+
+/*
+** Return a pointer to the name of a variable in the given VList that
+** has the value iVal. Or return a NULL if there is no such variable in
+** the list
+*/
+SQLITE_PRIVATE const char *sqlite3VListNumToName(VList *pIn, int iVal){
+ int i, mx;
+ if( pIn==0 ) return 0;
+ mx = pIn[1];
+ i = 2;
+ do{
+ if( pIn[i]==iVal ) return (char*)&pIn[i+2];
+ i += pIn[i+1];
+ }while( i<mx );
+ return 0;
+}
+
+/*
+** Return the number of the variable named zName, if it is in VList.
+** or return 0 if there is no such variable.
+*/
+SQLITE_PRIVATE int sqlite3VListNameToNum(VList *pIn, const char *zName, int nName){
+ int i, mx;
+ if( pIn==0 ) return 0;
+ mx = pIn[1];
+ i = 2;
+ do{
+ const char *z = (const char*)&pIn[i+2];
+ if( strncmp(z,zName,nName)==0 && z[nName]==0 ) return pIn[i];
+ i += pIn[i+1];
+ }while( i<mx );
+ return 0;
}
/************** End of util.c ************************************************/
static unsigned int strHash(const char *z){
unsigned int h = 0;
unsigned char c;
- while( (c = (unsigned char)*z++)!=0 ){
- h = (h<<3) ^ h ^ sqlite3UpperToLower[c];
+ while( (c = (unsigned char)*z++)!=0 ){ /*OPTIMIZATION-IF-TRUE*/
+ /* Knuth multiplicative hashing. (Sorting & Searching, p. 510).
+ ** 0x9e3779b1 is 2654435761 which is the closest prime number to
+ ** (2**32)*golden_ratio, where golden_ratio = (sqrt(5) - 1)/2. */
+ h += sqlite3UpperToLower[c];
+ h *= 0x9e3779b1;
}
return h;
}
}
/* This function (for internal use only) locates an element in an
-** hash table that matches the given key. The hash for this key is
-** also computed and returned in the *pH parameter.
+** hash table that matches the given key. If no element is found,
+** a pointer to a static null element with HashElem.data==0 is returned.
+** If pH is not NULL, then the hash for this key is written to *pH.
*/
static HashElem *findElementWithHash(
const Hash *pH, /* The pH to be searched */
HashElem *elem; /* Used to loop thru the element list */
int count; /* Number of elements left to test */
unsigned int h; /* The computed hash */
+ static HashElem nullElement = { 0, 0, 0, 0 };
- if( pH->ht ){
+ if( pH->ht ){ /*OPTIMIZATION-IF-TRUE*/
struct _ht *pEntry;
h = strHash(pKey) % pH->htsize;
pEntry = &pH->ht[h];
elem = pH->first;
count = pH->count;
}
- *pHash = h;
+ if( pHash ) *pHash = h;
while( count-- ){
assert( elem!=0 );
if( sqlite3StrICmp(elem->pKey,pKey)==0 ){
}
elem = elem->next;
}
- return 0;
+ return &nullElement;
}
/* Remove a single entry from the hash table given a pointer to that
** found, or NULL if there is no match.
*/
SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey){
- HashElem *elem; /* The element that matches key */
- unsigned int h; /* A hash on key */
-
assert( pH!=0 );
assert( pKey!=0 );
- elem = findElementWithHash(pH, pKey, &h);
- return elem ? elem->data : 0;
+ return findElementWithHash(pH, pKey, 0)->data;
}
/* Insert an element into the hash table pH. The key is pKey
assert( pH!=0 );
assert( pKey!=0 );
elem = findElementWithHash(pH,pKey,&h);
- if( elem ){
+ if( elem->data ){
void *old_data = elem->data;
if( data==0 ){
removeElementGivenHash(pH,elem,h);
/************** End of hash.c ************************************************/
/************** Begin file opcodes.c *****************************************/
/* Automatically generated. Do not edit */
-/* See the mkopcodec.awk script for details. */
-#if !defined(SQLITE_OMIT_EXPLAIN) || defined(VDBE_PROFILE) || defined(SQLITE_DEBUG)
+/* See the tool/mkopcodec.tcl script for details. */
+#if !defined(SQLITE_OMIT_EXPLAIN) \
+ || defined(VDBE_PROFILE) \
+ || defined(SQLITE_DEBUG)
#if defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) || defined(SQLITE_DEBUG)
# define OpHelp(X) "\0" X
#else
# define OpHelp(X)
#endif
SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
- static const char *const azName[] = { "?",
- /* 1 */ "Savepoint" OpHelp(""),
- /* 2 */ "AutoCommit" OpHelp(""),
- /* 3 */ "Transaction" OpHelp(""),
- /* 4 */ "SorterNext" OpHelp(""),
- /* 5 */ "PrevIfOpen" OpHelp(""),
- /* 6 */ "NextIfOpen" OpHelp(""),
- /* 7 */ "Prev" OpHelp(""),
- /* 8 */ "Next" OpHelp(""),
- /* 9 */ "Checkpoint" OpHelp(""),
- /* 10 */ "JournalMode" OpHelp(""),
- /* 11 */ "Vacuum" OpHelp(""),
- /* 12 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"),
- /* 13 */ "VUpdate" OpHelp("data=r[P3@P2]"),
- /* 14 */ "Goto" OpHelp(""),
- /* 15 */ "Gosub" OpHelp(""),
- /* 16 */ "Return" OpHelp(""),
- /* 17 */ "InitCoroutine" OpHelp(""),
- /* 18 */ "EndCoroutine" OpHelp(""),
- /* 19 */ "Not" OpHelp("r[P2]= !r[P1]"),
- /* 20 */ "Yield" OpHelp(""),
- /* 21 */ "HaltIfNull" OpHelp("if r[P3]=null halt"),
- /* 22 */ "Halt" OpHelp(""),
- /* 23 */ "Integer" OpHelp("r[P2]=P1"),
- /* 24 */ "Int64" OpHelp("r[P2]=P4"),
- /* 25 */ "String" OpHelp("r[P2]='P4' (len=P1)"),
- /* 26 */ "Null" OpHelp("r[P2..P3]=NULL"),
- /* 27 */ "SoftNull" OpHelp("r[P1]=NULL"),
- /* 28 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"),
- /* 29 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"),
- /* 30 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"),
- /* 31 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"),
- /* 32 */ "SCopy" OpHelp("r[P2]=r[P1]"),
- /* 33 */ "ResultRow" OpHelp("output=r[P1@P2]"),
- /* 34 */ "CollSeq" OpHelp(""),
- /* 35 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"),
- /* 36 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"),
- /* 37 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"),
- /* 38 */ "MustBeInt" OpHelp(""),
- /* 39 */ "RealAffinity" OpHelp(""),
- /* 40 */ "Cast" OpHelp("affinity(r[P1])"),
- /* 41 */ "Permutation" OpHelp(""),
- /* 42 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"),
- /* 43 */ "Jump" OpHelp(""),
- /* 44 */ "Once" OpHelp(""),
- /* 45 */ "If" OpHelp(""),
- /* 46 */ "IfNot" OpHelp(""),
- /* 47 */ "Column" OpHelp("r[P3]=PX"),
- /* 48 */ "Affinity" OpHelp("affinity(r[P1@P2])"),
- /* 49 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"),
- /* 50 */ "Count" OpHelp("r[P2]=count()"),
- /* 51 */ "ReadCookie" OpHelp(""),
- /* 52 */ "SetCookie" OpHelp(""),
- /* 53 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"),
- /* 54 */ "OpenRead" OpHelp("root=P2 iDb=P3"),
- /* 55 */ "OpenWrite" OpHelp("root=P2 iDb=P3"),
- /* 56 */ "OpenAutoindex" OpHelp("nColumn=P2"),
- /* 57 */ "OpenEphemeral" OpHelp("nColumn=P2"),
- /* 58 */ "SorterOpen" OpHelp(""),
- /* 59 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"),
- /* 60 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"),
- /* 61 */ "Close" OpHelp(""),
- /* 62 */ "ColumnsUsed" OpHelp(""),
- /* 63 */ "SeekLT" OpHelp("key=r[P3@P4]"),
- /* 64 */ "SeekLE" OpHelp("key=r[P3@P4]"),
- /* 65 */ "SeekGE" OpHelp("key=r[P3@P4]"),
- /* 66 */ "SeekGT" OpHelp("key=r[P3@P4]"),
- /* 67 */ "Seek" OpHelp("intkey=r[P2]"),
- /* 68 */ "NoConflict" OpHelp("key=r[P3@P4]"),
- /* 69 */ "NotFound" OpHelp("key=r[P3@P4]"),
- /* 70 */ "Found" OpHelp("key=r[P3@P4]"),
- /* 71 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"),
- /* 72 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"),
- /* 73 */ "NotExists" OpHelp("intkey=r[P3]"),
- /* 74 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"),
- /* 75 */ "NewRowid" OpHelp("r[P2]=rowid"),
- /* 76 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"),
- /* 77 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"),
- /* 78 */ "Ne" OpHelp("if r[P1]!=r[P3] goto P2"),
- /* 79 */ "Eq" OpHelp("if r[P1]==r[P3] goto P2"),
- /* 80 */ "Gt" OpHelp("if r[P1]>r[P3] goto P2"),
- /* 81 */ "Le" OpHelp("if r[P1]<=r[P3] goto P2"),
- /* 82 */ "Lt" OpHelp("if r[P1]<r[P3] goto P2"),
- /* 83 */ "Ge" OpHelp("if r[P1]>=r[P3] goto P2"),
- /* 84 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"),
- /* 85 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"),
- /* 86 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"),
- /* 87 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<<r[P1]"),
- /* 88 */ "ShiftRight" OpHelp("r[P3]=r[P2]>>r[P1]"),
- /* 89 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"),
- /* 90 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"),
- /* 91 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"),
- /* 92 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"),
- /* 93 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"),
- /* 94 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"),
- /* 95 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"),
- /* 96 */ "BitNot" OpHelp("r[P1]= ~r[P1]"),
- /* 97 */ "String8" OpHelp("r[P2]='P4'"),
- /* 98 */ "Delete" OpHelp(""),
- /* 99 */ "ResetCount" OpHelp(""),
- /* 100 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
- /* 101 */ "SorterData" OpHelp("r[P2]=data"),
- /* 102 */ "RowKey" OpHelp("r[P2]=key"),
- /* 103 */ "RowData" OpHelp("r[P2]=data"),
- /* 104 */ "Rowid" OpHelp("r[P2]=rowid"),
- /* 105 */ "NullRow" OpHelp(""),
- /* 106 */ "Last" OpHelp(""),
- /* 107 */ "SorterSort" OpHelp(""),
- /* 108 */ "Sort" OpHelp(""),
- /* 109 */ "Rewind" OpHelp(""),
- /* 110 */ "SorterInsert" OpHelp(""),
- /* 111 */ "IdxInsert" OpHelp("key=r[P2]"),
- /* 112 */ "IdxDelete" OpHelp("key=r[P2@P3]"),
- /* 113 */ "IdxRowid" OpHelp("r[P2]=rowid"),
- /* 114 */ "IdxLE" OpHelp("key=r[P3@P4]"),
- /* 115 */ "IdxGT" OpHelp("key=r[P3@P4]"),
- /* 116 */ "IdxLT" OpHelp("key=r[P3@P4]"),
- /* 117 */ "IdxGE" OpHelp("key=r[P3@P4]"),
- /* 118 */ "Destroy" OpHelp(""),
- /* 119 */ "Clear" OpHelp(""),
- /* 120 */ "ResetSorter" OpHelp(""),
- /* 121 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"),
- /* 122 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"),
- /* 123 */ "ParseSchema" OpHelp(""),
- /* 124 */ "LoadAnalysis" OpHelp(""),
- /* 125 */ "DropTable" OpHelp(""),
- /* 126 */ "DropIndex" OpHelp(""),
- /* 127 */ "DropTrigger" OpHelp(""),
- /* 128 */ "IntegrityCk" OpHelp(""),
- /* 129 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"),
- /* 130 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"),
- /* 131 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"),
- /* 132 */ "Program" OpHelp(""),
- /* 133 */ "Real" OpHelp("r[P2]=P4"),
- /* 134 */ "Param" OpHelp(""),
- /* 135 */ "FkCounter" OpHelp("fkctr[P1]+=P2"),
- /* 136 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"),
- /* 137 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"),
- /* 138 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"),
- /* 139 */ "SetIfNotPos" OpHelp("if r[P1]<=0 then r[P2]=P3"),
- /* 140 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]-=P3, goto P2"),
- /* 141 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"),
- /* 142 */ "JumpZeroIncr" OpHelp("if (r[P1]++)==0 ) goto P2"),
- /* 143 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"),
- /* 144 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"),
- /* 145 */ "AggFinal" OpHelp("accum=r[P1] N=P2"),
- /* 146 */ "IncrVacuum" OpHelp(""),
- /* 147 */ "Expire" OpHelp(""),
- /* 148 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"),
- /* 149 */ "VBegin" OpHelp(""),
- /* 150 */ "VCreate" OpHelp(""),
- /* 151 */ "VDestroy" OpHelp(""),
- /* 152 */ "VOpen" OpHelp(""),
- /* 153 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"),
- /* 154 */ "VNext" OpHelp(""),
- /* 155 */ "VRename" OpHelp(""),
- /* 156 */ "Pagecount" OpHelp(""),
- /* 157 */ "MaxPgcnt" OpHelp(""),
- /* 158 */ "Init" OpHelp("Start at P2"),
- /* 159 */ "Noop" OpHelp(""),
- /* 160 */ "Explain" OpHelp(""),
+ static const char *const azName[] = {
+ /* 0 */ "Savepoint" OpHelp(""),
+ /* 1 */ "AutoCommit" OpHelp(""),
+ /* 2 */ "Transaction" OpHelp(""),
+ /* 3 */ "SorterNext" OpHelp(""),
+ /* 4 */ "PrevIfOpen" OpHelp(""),
+ /* 5 */ "NextIfOpen" OpHelp(""),
+ /* 6 */ "Prev" OpHelp(""),
+ /* 7 */ "Next" OpHelp(""),
+ /* 8 */ "Checkpoint" OpHelp(""),
+ /* 9 */ "JournalMode" OpHelp(""),
+ /* 10 */ "Vacuum" OpHelp(""),
+ /* 11 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"),
+ /* 12 */ "VUpdate" OpHelp("data=r[P3@P2]"),
+ /* 13 */ "Goto" OpHelp(""),
+ /* 14 */ "Gosub" OpHelp(""),
+ /* 15 */ "InitCoroutine" OpHelp(""),
+ /* 16 */ "Yield" OpHelp(""),
+ /* 17 */ "MustBeInt" OpHelp(""),
+ /* 18 */ "Jump" OpHelp(""),
+ /* 19 */ "Not" OpHelp("r[P2]= !r[P1]"),
+ /* 20 */ "Once" OpHelp(""),
+ /* 21 */ "If" OpHelp(""),
+ /* 22 */ "IfNot" OpHelp(""),
+ /* 23 */ "IfNullRow" OpHelp("if P1.nullRow then r[P3]=NULL, goto P2"),
+ /* 24 */ "SeekLT" OpHelp("key=r[P3@P4]"),
+ /* 25 */ "SeekLE" OpHelp("key=r[P3@P4]"),
+ /* 26 */ "SeekGE" OpHelp("key=r[P3@P4]"),
+ /* 27 */ "SeekGT" OpHelp("key=r[P3@P4]"),
+ /* 28 */ "NoConflict" OpHelp("key=r[P3@P4]"),
+ /* 29 */ "NotFound" OpHelp("key=r[P3@P4]"),
+ /* 30 */ "Found" OpHelp("key=r[P3@P4]"),
+ /* 31 */ "SeekRowid" OpHelp("intkey=r[P3]"),
+ /* 32 */ "NotExists" OpHelp("intkey=r[P3]"),
+ /* 33 */ "Last" OpHelp(""),
+ /* 34 */ "IfSmaller" OpHelp(""),
+ /* 35 */ "SorterSort" OpHelp(""),
+ /* 36 */ "Sort" OpHelp(""),
+ /* 37 */ "Rewind" OpHelp(""),
+ /* 38 */ "IdxLE" OpHelp("key=r[P3@P4]"),
+ /* 39 */ "IdxGT" OpHelp("key=r[P3@P4]"),
+ /* 40 */ "IdxLT" OpHelp("key=r[P3@P4]"),
+ /* 41 */ "IdxGE" OpHelp("key=r[P3@P4]"),
+ /* 42 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"),
+ /* 43 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"),
+ /* 44 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"),
+ /* 45 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"),
+ /* 46 */ "Program" OpHelp(""),
+ /* 47 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"),
+ /* 48 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"),
+ /* 49 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"),
+ /* 50 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"),
+ /* 51 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"),
+ /* 52 */ "Ne" OpHelp("IF r[P3]!=r[P1]"),
+ /* 53 */ "Eq" OpHelp("IF r[P3]==r[P1]"),
+ /* 54 */ "Gt" OpHelp("IF r[P3]>r[P1]"),
+ /* 55 */ "Le" OpHelp("IF r[P3]<=r[P1]"),
+ /* 56 */ "Lt" OpHelp("IF r[P3]<r[P1]"),
+ /* 57 */ "Ge" OpHelp("IF r[P3]>=r[P1]"),
+ /* 58 */ "ElseNotEq" OpHelp(""),
+ /* 59 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"),
+ /* 60 */ "IncrVacuum" OpHelp(""),
+ /* 61 */ "VNext" OpHelp(""),
+ /* 62 */ "Init" OpHelp("Start at P2"),
+ /* 63 */ "Return" OpHelp(""),
+ /* 64 */ "EndCoroutine" OpHelp(""),
+ /* 65 */ "HaltIfNull" OpHelp("if r[P3]=null halt"),
+ /* 66 */ "Halt" OpHelp(""),
+ /* 67 */ "Integer" OpHelp("r[P2]=P1"),
+ /* 68 */ "Int64" OpHelp("r[P2]=P4"),
+ /* 69 */ "String" OpHelp("r[P2]='P4' (len=P1)"),
+ /* 70 */ "Null" OpHelp("r[P2..P3]=NULL"),
+ /* 71 */ "SoftNull" OpHelp("r[P1]=NULL"),
+ /* 72 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"),
+ /* 73 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"),
+ /* 74 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"),
+ /* 75 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"),
+ /* 76 */ "SCopy" OpHelp("r[P2]=r[P1]"),
+ /* 77 */ "IntCopy" OpHelp("r[P2]=r[P1]"),
+ /* 78 */ "ResultRow" OpHelp("output=r[P1@P2]"),
+ /* 79 */ "CollSeq" OpHelp(""),
+ /* 80 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"),
+ /* 81 */ "RealAffinity" OpHelp(""),
+ /* 82 */ "Cast" OpHelp("affinity(r[P1])"),
+ /* 83 */ "Permutation" OpHelp(""),
+ /* 84 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"),
+ /* 85 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"),
+ /* 86 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<<r[P1]"),
+ /* 87 */ "ShiftRight" OpHelp("r[P3]=r[P2]>>r[P1]"),
+ /* 88 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"),
+ /* 89 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"),
+ /* 90 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"),
+ /* 91 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"),
+ /* 92 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"),
+ /* 93 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"),
+ /* 94 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"),
+ /* 95 */ "BitNot" OpHelp("r[P1]= ~r[P1]"),
+ /* 96 */ "IsTrue" OpHelp("r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4"),
+ /* 97 */ "String8" OpHelp("r[P2]='P4'"),
+ /* 98 */ "Offset" OpHelp("r[P3] = sqlite_offset(P1)"),
+ /* 99 */ "Column" OpHelp("r[P3]=PX"),
+ /* 100 */ "Affinity" OpHelp("affinity(r[P1@P2])"),
+ /* 101 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"),
+ /* 102 */ "Count" OpHelp("r[P2]=count()"),
+ /* 103 */ "ReadCookie" OpHelp(""),
+ /* 104 */ "SetCookie" OpHelp(""),
+ /* 105 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"),
+ /* 106 */ "OpenRead" OpHelp("root=P2 iDb=P3"),
+ /* 107 */ "OpenWrite" OpHelp("root=P2 iDb=P3"),
+ /* 108 */ "OpenDup" OpHelp(""),
+ /* 109 */ "OpenAutoindex" OpHelp("nColumn=P2"),
+ /* 110 */ "OpenEphemeral" OpHelp("nColumn=P2"),
+ /* 111 */ "SorterOpen" OpHelp(""),
+ /* 112 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"),
+ /* 113 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"),
+ /* 114 */ "Close" OpHelp(""),
+ /* 115 */ "ColumnsUsed" OpHelp(""),
+ /* 116 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"),
+ /* 117 */ "NewRowid" OpHelp("r[P2]=rowid"),
+ /* 118 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"),
+ /* 119 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"),
+ /* 120 */ "Delete" OpHelp(""),
+ /* 121 */ "ResetCount" OpHelp(""),
+ /* 122 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
+ /* 123 */ "SorterData" OpHelp("r[P2]=data"),
+ /* 124 */ "RowData" OpHelp("r[P2]=data"),
+ /* 125 */ "Rowid" OpHelp("r[P2]=rowid"),
+ /* 126 */ "NullRow" OpHelp(""),
+ /* 127 */ "SeekEnd" OpHelp(""),
+ /* 128 */ "SorterInsert" OpHelp("key=r[P2]"),
+ /* 129 */ "IdxInsert" OpHelp("key=r[P2]"),
+ /* 130 */ "IdxDelete" OpHelp("key=r[P2@P3]"),
+ /* 131 */ "DeferredSeek" OpHelp("Move P3 to P1.rowid if needed"),
+ /* 132 */ "Real" OpHelp("r[P2]=P4"),
+ /* 133 */ "IdxRowid" OpHelp("r[P2]=rowid"),
+ /* 134 */ "Destroy" OpHelp(""),
+ /* 135 */ "Clear" OpHelp(""),
+ /* 136 */ "ResetSorter" OpHelp(""),
+ /* 137 */ "CreateBtree" OpHelp("r[P2]=root iDb=P1 flags=P3"),
+ /* 138 */ "SqlExec" OpHelp(""),
+ /* 139 */ "ParseSchema" OpHelp(""),
+ /* 140 */ "LoadAnalysis" OpHelp(""),
+ /* 141 */ "DropTable" OpHelp(""),
+ /* 142 */ "DropIndex" OpHelp(""),
+ /* 143 */ "DropTrigger" OpHelp(""),
+ /* 144 */ "IntegrityCk" OpHelp(""),
+ /* 145 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"),
+ /* 146 */ "Param" OpHelp(""),
+ /* 147 */ "FkCounter" OpHelp("fkctr[P1]+=P2"),
+ /* 148 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"),
+ /* 149 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"),
+ /* 150 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"),
+ /* 151 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"),
+ /* 152 */ "AggFinal" OpHelp("accum=r[P1] N=P2"),
+ /* 153 */ "Expire" OpHelp(""),
+ /* 154 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"),
+ /* 155 */ "VBegin" OpHelp(""),
+ /* 156 */ "VCreate" OpHelp(""),
+ /* 157 */ "VDestroy" OpHelp(""),
+ /* 158 */ "VOpen" OpHelp(""),
+ /* 159 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"),
+ /* 160 */ "VRename" OpHelp(""),
+ /* 161 */ "Pagecount" OpHelp(""),
+ /* 162 */ "MaxPgcnt" OpHelp(""),
+ /* 163 */ "PureFunc0" OpHelp(""),
+ /* 164 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"),
+ /* 165 */ "PureFunc" OpHelp(""),
+ /* 166 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"),
+ /* 167 */ "Trace" OpHelp(""),
+ /* 168 */ "CursorHint" OpHelp(""),
+ /* 169 */ "Noop" OpHelp(""),
+ /* 170 */ "Explain" OpHelp(""),
};
return azName[i];
}
# endif
#endif
+/* Use pread() and pwrite() if they are available */
+#if defined(__APPLE__)
+# define HAVE_PREAD 1
+# define HAVE_PWRITE 1
+#endif
+#if defined(HAVE_PREAD64) && defined(HAVE_PWRITE64)
+# undef USE_PREAD
+# define USE_PREAD64 1
+#elif defined(HAVE_PREAD) && defined(HAVE_PWRITE)
+# undef USE_PREAD64
+# define USE_PREAD 1
+#endif
+
/*
** standard include files.
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <sys/ioctl.h>
#include <unistd.h>
/* #include <time.h> */
#include <sys/time.h>
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
-# include <sys/ioctl.h>
+/* # include <sys/ioctl.h> */
# include <sys/file.h>
# include <sys/param.h>
#endif /* SQLITE_ENABLE_LOCKING_STYLE */
*/
#define MAX_PATHNAME 512
+/*
+** Maximum supported symbolic links
+*/
+#define SQLITE_MAX_SYMLINKS 100
+
/* Always cast the getpid() return type for compatibility with
** kernel modules in VxWorks. */
#define osGetpid(X) (pid_t)getpid()
unsigned short int ctrlFlags; /* Behavioral bits. UNIXFILE_* flags */
int lastErrno; /* The unix errno from last I/O error */
void *lockingContext; /* Locking style specific state */
- UnixUnusedFd *pUnused; /* Pre-allocated UnixUnusedFd */
+ UnixUnusedFd *pPreallocatedUnused; /* Pre-allocated UnixUnusedFd */
const char *zPath; /* Name of the file */
unixShm *pShm; /* Shared memory segment information */
int szChunk; /* Configured by FCNTL_CHUNK_SIZE */
sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */
void *pMapRegion; /* Memory mapped region */
#endif
-#ifdef __QNXNTO__
int sectorSize; /* Device sector size */
int deviceCharacteristics; /* Precomputed device characteristics */
-#endif
#if SQLITE_ENABLE_LOCKING_STYLE
int openFlags; /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
unsigned fsFlags; /* cached details from statfs() */
#endif
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
+ unsigned iBusyTimeout; /* Wait this many millisec on locks */
+#endif
#if OS_VXWORKS
struct vxworksFileId *pId; /* Unique file ID */
#endif
#define UNIXFILE_DELETE 0x20 /* Delete on close */
#define UNIXFILE_URI 0x40 /* Filename might have query parameters */
#define UNIXFILE_NOLOCK 0x80 /* Do no file locking */
-#define UNIXFILE_WARNED 0x0100 /* verifyDbFile() warnings issued */
-#define UNIXFILE_BLOCK 0x0200 /* Next SHM lock might block */
/*
** Include code that is common to all os_*.c files
*/
#ifdef SQLITE_PERFORMANCE_TRACE
-/*
-** hwtime.h contains inline assembler code for implementing
+/*
+** hwtime.h contains inline assembler code for implementing
** high-performance timing routines.
*/
/************** Include hwtime.h in the middle of os_common.h ****************/
** This file contains inline asm code for retrieving "high-performance"
** counters for x86 class CPUs.
*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
+#ifndef SQLITE_HWTIME_H
+#define SQLITE_HWTIME_H
/*
** The following routine only works on pentium-class (or newer) processors.
#endif
-#endif /* !defined(_HWTIME_H_) */
+#endif /* !defined(SQLITE_HWTIME_H) */
/************** End of hwtime.h **********************************************/
/************** Continuing where we left off in os_common.h ******************/
** of code will give us the ability to simulate a disk I/O error. This
** is used for testing the I/O recovery logic.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */
-SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */
-SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */
-SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */
-SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */
-SQLITE_API int sqlite3_diskfull_pending = 0;
-SQLITE_API int sqlite3_diskfull = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_io_error_hit;
+SQLITE_API extern int sqlite3_io_error_hardhit;
+SQLITE_API extern int sqlite3_io_error_pending;
+SQLITE_API extern int sqlite3_io_error_persist;
+SQLITE_API extern int sqlite3_io_error_benign;
+SQLITE_API extern int sqlite3_diskfull_pending;
+SQLITE_API extern int sqlite3_diskfull;
#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
#define SimulateIOError(CODE) \
if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
#define SimulateIOErrorBenign(X)
#define SimulateIOError(A)
#define SimulateDiskfullError(A)
-#endif
+#endif /* defined(SQLITE_TEST) */
/*
** When testing, keep a count of the number of open files.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_open_file_count = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_open_file_count;
#define OpenCounter(X) sqlite3_open_file_count+=(X)
#else
#define OpenCounter(X)
-#endif
+#endif /* defined(SQLITE_TEST) */
#endif /* !defined(_OS_COMMON_H_) */
# define lseek lseek64
#endif
+#ifdef __linux__
+/*
+** Linux-specific IOCTL magic numbers used for controlling F2FS
+*/
+#define F2FS_IOCTL_MAGIC 0xf5
+#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1)
+#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2)
+#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3)
+#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5)
+#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, u32)
+#define F2FS_FEATURE_ATOMIC_WRITE 0x0004
+#endif /* __linux__ */
+
+
/*
** Different Unix systems declare open() in different ways. Same use
** open(const char*,int,mode_t). Others use open(const char*,int,...).
return open(zFile, flags, mode);
}
-/*
-** On some systems, calls to fchown() will trigger a message in a security
-** log if they come from non-root processes. So avoid calling fchown() if
-** we are not running as root.
-*/
-static int posixFchown(int fd, uid_t uid, gid_t gid){
-#if OS_VXWORKS
- return 0;
-#else
- return geteuid() ? 0 : fchown(fd,uid,gid);
-#endif
-}
-
/* Forward reference */
static int openDirectory(const char*, int*);
static int unixGetpagesize(void);
#else
{ "pread64", (sqlite3_syscall_ptr)0, 0 },
#endif
-#define osPread64 ((ssize_t(*)(int,void*,size_t,off_t))aSyscall[10].pCurrent)
+#define osPread64 ((ssize_t(*)(int,void*,size_t,off64_t))aSyscall[10].pCurrent)
{ "write", (sqlite3_syscall_ptr)write, 0 },
#define osWrite ((ssize_t(*)(int,const void*,size_t))aSyscall[11].pCurrent)
#else
{ "pwrite64", (sqlite3_syscall_ptr)0, 0 },
#endif
-#define osPwrite64 ((ssize_t(*)(int,const void*,size_t,off_t))\
+#define osPwrite64 ((ssize_t(*)(int,const void*,size_t,off64_t))\
aSyscall[13].pCurrent)
- { "fchmod", (sqlite3_syscall_ptr)fchmod, 0 },
+ { "fchmod", (sqlite3_syscall_ptr)fchmod, 0 },
#define osFchmod ((int(*)(int,mode_t))aSyscall[14].pCurrent)
#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
{ "rmdir", (sqlite3_syscall_ptr)rmdir, 0 },
#define osRmdir ((int(*)(const char*))aSyscall[19].pCurrent)
- { "fchown", (sqlite3_syscall_ptr)posixFchown, 0 },
+#if defined(HAVE_FCHOWN)
+ { "fchown", (sqlite3_syscall_ptr)fchown, 0 },
+#else
+ { "fchown", (sqlite3_syscall_ptr)0, 0 },
+#endif
#define osFchown ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent)
+#if defined(HAVE_FCHOWN)
+ { "geteuid", (sqlite3_syscall_ptr)geteuid, 0 },
+#else
+ { "geteuid", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osGeteuid ((uid_t(*)(void))aSyscall[21].pCurrent)
+
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
- { "mmap", (sqlite3_syscall_ptr)mmap, 0 },
-#define osMmap ((void*(*)(void*,size_t,int,int,int,off_t))aSyscall[21].pCurrent)
+ { "mmap", (sqlite3_syscall_ptr)mmap, 0 },
+#else
+ { "mmap", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osMmap ((void*(*)(void*,size_t,int,int,int,off_t))aSyscall[22].pCurrent)
+#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
{ "munmap", (sqlite3_syscall_ptr)munmap, 0 },
-#define osMunmap ((void*(*)(void*,size_t))aSyscall[22].pCurrent)
+#else
+ { "munmap", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osMunmap ((int(*)(void*,size_t))aSyscall[23].pCurrent)
-#if HAVE_MREMAP
+#if HAVE_MREMAP && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
{ "mremap", (sqlite3_syscall_ptr)mremap, 0 },
#else
{ "mremap", (sqlite3_syscall_ptr)0, 0 },
#endif
-#define osMremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[23].pCurrent)
+#define osMremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[24].pCurrent)
+
+#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
{ "getpagesize", (sqlite3_syscall_ptr)unixGetpagesize, 0 },
-#define osGetpagesize ((int(*)(void))aSyscall[24].pCurrent)
+#else
+ { "getpagesize", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osGetpagesize ((int(*)(void))aSyscall[25].pCurrent)
+
+#if defined(HAVE_READLINK)
+ { "readlink", (sqlite3_syscall_ptr)readlink, 0 },
+#else
+ { "readlink", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osReadlink ((ssize_t(*)(const char*,char*,size_t))aSyscall[26].pCurrent)
+#if defined(HAVE_LSTAT)
+ { "lstat", (sqlite3_syscall_ptr)lstat, 0 },
+#else
+ { "lstat", (sqlite3_syscall_ptr)0, 0 },
+#endif
+#define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)
+
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ { "ioctl", (sqlite3_syscall_ptr)ioctl, 0 },
+#else
+ { "ioctl", (sqlite3_syscall_ptr)0, 0 },
#endif
+#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent)
}; /* End of the overrideable system calls */
+
+/*
+** On some systems, calls to fchown() will trigger a message in a security
+** log if they come from non-root processes. So avoid calling fchown() if
+** we are not running as root.
+*/
+static int robustFchown(int fd, uid_t uid, gid_t gid){
+#if defined(HAVE_FCHOWN)
+ return osGeteuid() ? 0 : osFchown(fd,uid,gid);
+#else
+ return 0;
+#endif
+}
+
/*
** This is the xSetSystemCall() method of sqlite3_vfs for all of the
** "unix" VFSes. Return SQLITE_OK opon successfully updating the
** assert( unixMutexHeld() );
** unixEnterLeave()
*/
+static sqlite3_mutex *unixBigLock = 0;
static void unixEnterMutex(void){
- sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ sqlite3_mutex_enter(unixBigLock);
}
static void unixLeaveMutex(void){
- sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ sqlite3_mutex_leave(unixBigLock);
}
#ifdef SQLITE_DEBUG
static int unixMutexHeld(void) {
- return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ return sqlite3_mutex_held(unixBigLock);
}
#endif
** should handle ENOLCK, ENOTSUP, EOPNOTSUPP separately.
*/
static int sqliteErrorFromPosixError(int posixError, int sqliteIOErr) {
+ assert( (sqliteIOErr == SQLITE_IOERR_LOCK) ||
+ (sqliteIOErr == SQLITE_IOERR_UNLOCK) ||
+ (sqliteIOErr == SQLITE_IOERR_RDLOCK) ||
+ (sqliteIOErr == SQLITE_IOERR_CHECKRESERVEDLOCK) );
switch (posixError) {
-#if 0
- /* At one point this code was not commented out. In theory, this branch
- ** should never be hit, as this function should only be called after
- ** a locking-related function (i.e. fcntl()) has returned non-zero with
- ** the value of errno as the first argument. Since a system call has failed,
- ** errno should be non-zero.
- **
- ** Despite this, if errno really is zero, we still don't want to return
- ** SQLITE_OK. The system call failed, and *some* SQLite error should be
- ** propagated back to the caller. Commenting this branch out means errno==0
- ** will be handled by the "default:" case below.
- */
- case 0:
- return SQLITE_OK;
-#endif
-
+ case EACCES:
case EAGAIN:
case ETIMEDOUT:
case EBUSY:
* introspection, in which it actually means what it says */
return SQLITE_BUSY;
- case EACCES:
- /* EACCES is like EAGAIN during locking operations, but not any other time*/
- if( (sqliteIOErr == SQLITE_IOERR_LOCK) ||
- (sqliteIOErr == SQLITE_IOERR_UNLOCK) ||
- (sqliteIOErr == SQLITE_IOERR_RDLOCK) ||
- (sqliteIOErr == SQLITE_IOERR_CHECKRESERVEDLOCK) ){
- return SQLITE_BUSY;
- }
- /* else fall through */
case EPERM:
return SQLITE_PERM;
-#if EOPNOTSUPP!=ENOTSUP
- case EOPNOTSUPP:
- /* something went terribly awry, unless during file system support
- * introspection, in which it actually means what it says */
-#endif
-#ifdef ENOTSUP
- case ENOTSUP:
- /* invalid fd, unless during file system support introspection, in which
- * it actually means what it says */
-#endif
- case EIO:
- case EBADF:
- case EINVAL:
- case ENOTCONN:
- case ENODEV:
- case ENXIO:
- case ENOENT:
-#ifdef ESTALE /* ESTALE is not defined on Interix systems */
- case ESTALE:
-#endif
- case ENOSYS:
- /* these should force the client to close the file and reconnect */
-
default:
return sqliteIOErr;
}
#if OS_VXWORKS
struct vxworksFileId *pId; /* Unique file ID for vxworks. */
#else
- ino_t ino; /* Inode number */
+ /* We are told that some versions of Android contain a bug that
+ ** sizes ino_t at only 32-bits instead of 64-bits. (See
+ ** https://android-review.googlesource.com/#/c/115351/3/dist/sqlite3.c)
+ ** To work around this, always allocate 64-bits for the inode number.
+ ** On small machines that only have 32-bit inodes, this wastes 4 bytes,
+ ** but that should not be a big deal. */
+ /* WAS: ino_t ino; */
+ u64 ino; /* Inode number */
#endif
};
/*
** A lists of all unixInodeInfo objects.
*/
-static unixInodeInfo *inodeList = 0;
+static unixInodeInfo *inodeList = 0; /* All unixInodeInfo objects */
+static unsigned int nUnusedFd = 0; /* Total unused file descriptors */
/*
**
-** This function - unixLogError_x(), is only ever called via the macro
+** This function - unixLogErrorAtLine(), is only ever called via the macro
** unixLogError().
**
** It is invoked after an error occurs in an OS function and errno has been
pNext = p->pNext;
robust_close(pFile, p->fd, __LINE__);
sqlite3_free(p);
+ nUnusedFd--;
}
pInode->pUnused = 0;
}
sqlite3_free(pInode);
}
}
+ assert( inodeList!=0 || nUnusedFd==0 );
}
/*
rc = osFstat(fd, &statbuf);
if( rc!=0 ){
storeLastErrno(pFile, errno);
-#ifdef EOVERFLOW
+#if defined(EOVERFLOW) && defined(SQLITE_DISABLE_LFS)
if( pFile->lastErrno==EOVERFLOW ) return SQLITE_NOLFS;
#endif
return SQLITE_IOERR;
#if OS_VXWORKS
fileId.pId = pFile->pId;
#else
- fileId.ino = statbuf.st_ino;
+ fileId.ino = (u64)statbuf.st_ino;
#endif
+ assert( inodeList!=0 || nUnusedFd==0 );
pInode = inodeList;
while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){
pInode = pInode->pNext;
if( pInode==0 ){
pInode = sqlite3_malloc64( sizeof(*pInode) );
if( pInode==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset(pInode, 0, sizeof(*pInode));
memcpy(&pInode->fileId, &fileId, sizeof(fileId));
#else
struct stat buf;
return pFile->pInode!=0 &&
- (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino);
+ (osStat(pFile->zPath, &buf)!=0
+ || (u64)buf.st_ino!=pFile->pInode->fileId.ino);
#endif
}
static void verifyDbFile(unixFile *pFile){
struct stat buf;
int rc;
- if( pFile->ctrlFlags & UNIXFILE_WARNED ){
- /* One or more of the following warnings have already been issued. Do not
- ** repeat them so as not to clutter the error log */
- return;
- }
+
+ /* These verifications occurs for the main database only */
+ if( pFile->ctrlFlags & UNIXFILE_NOLOCK ) return;
+
rc = osFstat(pFile->h, &buf);
if( rc!=0 ){
sqlite3_log(SQLITE_WARNING, "cannot fstat db file %s", pFile->zPath);
- pFile->ctrlFlags |= UNIXFILE_WARNED;
return;
}
- if( buf.st_nlink==0 && (pFile->ctrlFlags & UNIXFILE_DELETE)==0 ){
+ if( buf.st_nlink==0 ){
sqlite3_log(SQLITE_WARNING, "file unlinked while open: %s", pFile->zPath);
- pFile->ctrlFlags |= UNIXFILE_WARNED;
return;
}
if( buf.st_nlink>1 ){
sqlite3_log(SQLITE_WARNING, "multiple links to file: %s", pFile->zPath);
- pFile->ctrlFlags |= UNIXFILE_WARNED;
return;
}
if( fileHasMoved(pFile) ){
sqlite3_log(SQLITE_WARNING, "file renamed while open: %s", pFile->zPath);
- pFile->ctrlFlags |= UNIXFILE_WARNED;
return;
}
}
SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
assert( pFile );
+ assert( pFile->eFileLock<=SHARED_LOCK );
unixEnterMutex(); /* Because pFile->pInode is shared across threads */
/* Check if a thread in this process holds such a lock */
return rc;
}
+/*
+** Set a posix-advisory-lock.
+**
+** There are two versions of this routine. If compiled with
+** SQLITE_ENABLE_SETLK_TIMEOUT then the routine has an extra parameter
+** which is a pointer to a unixFile. If the unixFile->iBusyTimeout
+** value is set, then it is the number of milliseconds to wait before
+** failing the lock. The iBusyTimeout value is always reset back to
+** zero on each call.
+**
+** If SQLITE_ENABLE_SETLK_TIMEOUT is not defined, then do a non-blocking
+** attempt to set the lock.
+*/
+#ifndef SQLITE_ENABLE_SETLK_TIMEOUT
+# define osSetPosixAdvisoryLock(h,x,t) osFcntl(h,F_SETLK,x)
+#else
+static int osSetPosixAdvisoryLock(
+ int h, /* The file descriptor on which to take the lock */
+ struct flock *pLock, /* The description of the lock */
+ unixFile *pFile /* Structure holding timeout value */
+){
+ int rc = osFcntl(h,F_SETLK,pLock);
+ while( rc<0 && pFile->iBusyTimeout>0 ){
+ /* On systems that support some kind of blocking file lock with a timeout,
+ ** make appropriate changes here to invoke that blocking file lock. On
+ ** generic posix, however, there is no such API. So we simply try the
+ ** lock once every millisecond until either the timeout expires, or until
+ ** the lock is obtained. */
+ usleep(1000);
+ rc = osFcntl(h,F_SETLK,pLock);
+ pFile->iBusyTimeout--;
+ }
+ return rc;
+}
+#endif /* SQLITE_ENABLE_SETLK_TIMEOUT */
+
+
/*
** Attempt to set a system-lock on the file pFile. The lock is
** described by pLock.
unixInodeInfo *pInode = pFile->pInode;
assert( unixMutexHeld() );
assert( pInode!=0 );
- if( ((pFile->ctrlFlags & UNIXFILE_EXCL)!=0 || pInode->bProcessLock)
- && ((pFile->ctrlFlags & UNIXFILE_RDONLY)==0)
- ){
+ if( (pFile->ctrlFlags & (UNIXFILE_EXCL|UNIXFILE_RDONLY))==UNIXFILE_EXCL ){
if( pInode->bProcessLock==0 ){
struct flock lock;
assert( pInode->nLock==0 );
lock.l_start = SHARED_FIRST;
lock.l_len = SHARED_SIZE;
lock.l_type = F_WRLCK;
- rc = osFcntl(pFile->h, F_SETLK, &lock);
+ rc = osSetPosixAdvisoryLock(pFile->h, &lock, pFile);
if( rc<0 ) return rc;
pInode->bProcessLock = 1;
pInode->nLock++;
rc = 0;
}
}else{
- rc = osFcntl(pFile->h, F_SETLK, pLock);
+ rc = osSetPosixAdvisoryLock(pFile->h, pLock, pFile);
}
return rc;
}
** lock transitions in terms of the POSIX advisory shared and exclusive
** lock primitives (called read-locks and write-locks below, to avoid
** confusion with SQLite lock names). The algorithms are complicated
- ** slightly in order to be compatible with windows systems simultaneously
+ ** slightly in order to be compatible with Windows95 systems simultaneously
** accessing the same database file, in case that is ever required.
**
** Symbols defined in os.h indentify the 'pending byte' and the 'reserved
** range', a range of 510 bytes at a well known offset.
**
** To obtain a SHARED lock, a read-lock is obtained on the 'pending
- ** byte'. If this is successful, a random byte from the 'shared byte
- ** range' is read-locked and the lock on the 'pending byte' released.
+ ** byte'. If this is successful, 'shared byte range' is read-locked
+ ** and the lock on the 'pending byte' released. (Legacy note: When
+ ** SQLite was first developed, Windows95 systems were still very common,
+ ** and Widnows95 lacks a shared-lock capability. So on Windows95, a
+ ** single randomly selected by from the 'shared byte range' is locked.
+ ** Windows95 is now pretty much extinct, but this work-around for the
+ ** lack of shared-locks on Windows95 lives on, for backwards
+ ** compatibility.)
**
** A process may only obtain a RESERVED lock after it has a SHARED lock.
** A RESERVED lock is implemented by grabbing a write-lock on the
** range'. Since all other locks require a read-lock on one of the bytes
** within this range, this ensures that no other locks are held on the
** database.
- **
- ** The reason a single byte cannot be used instead of the 'shared byte
- ** range' is that some versions of windows do not support read-locks. By
- ** locking a random byte from a range, concurrent SHARED locks may exist
- ** even if the locking primitive used is always a write-lock.
*/
int rc = SQLITE_OK;
unixFile *pFile = (unixFile*)id;
*/
static void setPendingFd(unixFile *pFile){
unixInodeInfo *pInode = pFile->pInode;
- UnixUnusedFd *p = pFile->pUnused;
+ UnixUnusedFd *p = pFile->pPreallocatedUnused;
p->pNext = pInode->pUnused;
pInode->pUnused = p;
pFile->h = -1;
- pFile->pUnused = 0;
+ pFile->pPreallocatedUnused = 0;
+ nUnusedFd++;
}
/*
if( unixFileLock(pFile, &lock)==(-1) ){
tErrno = errno;
rc = SQLITE_IOERR_UNLOCK;
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
+ storeLastErrno(pFile, tErrno);
goto end_unlock;
}
lock.l_type = F_RDLCK;
if( unixFileLock(pFile, &lock)==(-1) ){
tErrno = errno;
rc = SQLITE_IOERR_UNLOCK;
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
+ storeLastErrno(pFile, tErrno);
goto end_unlock;
}
}else
#endif
OSTRACE(("CLOSE %-3d\n", pFile->h));
OpenCounter(-1);
- sqlite3_free(pFile->pUnused);
+ sqlite3_free(pFile->pPreallocatedUnused);
memset(pFile, 0, sizeof(unixFile));
return SQLITE_OK;
}
SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
assert( pFile );
-
- /* Check if a thread in this process holds such a lock */
- if( pFile->eFileLock>SHARED_LOCK ){
- /* Either this connection or some other connection in the same process
- ** holds a lock on the file. No need to check further. */
- reserved = 1;
- }else{
- /* The lock is held if and only if the lockfile exists */
- const char *zLockFile = (const char*)pFile->lockingContext;
- reserved = osAccess(zLockFile, 0)==0;
- }
+ reserved = osAccess((const char*)pFile->lockingContext, 0)==0;
OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
*pResOut = reserved;
return rc;
rc = SQLITE_BUSY;
} else {
rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- if( IS_LOCK_ERROR(rc) ){
+ if( rc!=SQLITE_BUSY ){
storeLastErrno(pFile, tErrno);
}
}
/* To fully unlock the database, delete the lock file */
assert( eFileLock==NO_LOCK );
rc = osRmdir(zLockFile);
- if( rc<0 && errno==ENOTDIR ) rc = osUnlink(zLockFile);
if( rc<0 ){
int tErrno = errno;
- rc = 0;
- if( ENOENT != tErrno ){
+ if( tErrno==ENOENT ){
+ rc = SQLITE_OK;
+ }else{
rc = SQLITE_IOERR_UNLOCK;
- }
- if( IS_LOCK_ERROR(rc) ){
storeLastErrno(pFile, tErrno);
}
return rc;
** Close a file. Make sure the lock has been released before closing.
*/
static int dotlockClose(sqlite3_file *id) {
- int rc = SQLITE_OK;
- if( id ){
- unixFile *pFile = (unixFile*)id;
- dotlockUnlock(id, NO_LOCK);
- sqlite3_free(pFile->lockingContext);
- rc = closeUnixFile(id);
- }
- return rc;
+ unixFile *pFile = (unixFile*)id;
+ assert( id!=0 );
+ dotlockUnlock(id, NO_LOCK);
+ sqlite3_free(pFile->lockingContext);
+ return closeUnixFile(id);
}
/****************** End of the dot-file lock implementation *******************
******************************************************************************/
int tErrno = errno;
/* unlock failed with an error */
lrc = SQLITE_IOERR_UNLOCK;
- if( IS_LOCK_ERROR(lrc) ){
- storeLastErrno(pFile, tErrno);
- rc = lrc;
- }
+ storeLastErrno(pFile, tErrno);
+ rc = lrc;
}
} else {
int tErrno = errno;
OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved));
#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
+ if( (rc & 0xff) == SQLITE_IOERR ){
rc = SQLITE_OK;
reserved=1;
}
OSTRACE(("LOCK %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock),
rc==SQLITE_OK ? "ok" : "failed"));
#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
+ if( (rc & 0xff) == SQLITE_IOERR ){
rc = SQLITE_BUSY;
}
#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
** Close a file.
*/
static int flockClose(sqlite3_file *id) {
- int rc = SQLITE_OK;
- if( id ){
- flockUnlock(id, NO_LOCK);
- rc = closeUnixFile(id);
- }
- return rc;
+ assert( id!=0 );
+ flockUnlock(id, NO_LOCK);
+ return closeUnixFile(id);
}
#endif /* SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORK */
/* Can't reestablish the shared lock. Sqlite can't deal, this is
** a critical I/O error
*/
- rc = ((failed & SQLITE_IOERR) == SQLITE_IOERR) ? failed2 :
+ rc = ((failed & 0xff) == SQLITE_IOERR) ? failed2 :
SQLITE_IOERR_LOCK;
goto afp_end_lock;
}
*/
static int afpClose(sqlite3_file *id) {
int rc = SQLITE_OK;
- if( id ){
- unixFile *pFile = (unixFile*)id;
- afpUnlock(id, NO_LOCK);
- unixEnterMutex();
- if( pFile->pInode && pFile->pInode->nLock ){
- /* If there are outstanding locks, do not actually close the file just
- ** yet because that would clear those locks. Instead, add the file
- ** descriptor to pInode->aPending. It will be automatically closed when
- ** the last lock is cleared.
- */
- setPendingFd(pFile);
- }
- releaseInodeInfo(pFile);
- sqlite3_free(pFile->lockingContext);
- rc = closeUnixFile(id);
- unixLeaveMutex();
+ unixFile *pFile = (unixFile*)id;
+ assert( id!=0 );
+ afpUnlock(id, NO_LOCK);
+ unixEnterMutex();
+ if( pFile->pInode && pFile->pInode->nLock ){
+ /* If there are outstanding locks, do not actually close the file just
+ ** yet because that would clear those locks. Instead, add the file
+ ** descriptor to pInode->aPending. It will be automatically closed when
+ ** the last lock is cleared.
+ */
+ setPendingFd(pFile);
}
+ releaseInodeInfo(pFile);
+ sqlite3_free(pFile->lockingContext);
+ rc = closeUnixFile(id);
+ unixLeaveMutex();
return rc;
}
SimulateIOError( got = -1 );
#else
newOffset = lseek(id->h, offset, SEEK_SET);
- SimulateIOError( newOffset-- );
- if( newOffset!=offset ){
- if( newOffset == -1 ){
- storeLastErrno((unixFile*)id, errno);
- }else{
- storeLastErrno((unixFile*)id, 0);
- }
+ SimulateIOError( newOffset = -1 );
+ if( newOffset<0 ){
+ storeLastErrno((unixFile*)id, errno);
return -1;
}
got = osRead(id->h, pBuf, cnt);
/* If this is a database file (not a journal, master-journal or temp
** file), the bytes in the locking range should never be read or written. */
#if 0
- assert( pFile->pUnused==0
+ assert( pFile->pPreallocatedUnused==0
|| offset>=PENDING_BYTE+512
|| offset+amt<=PENDING_BYTE
);
assert( nBuf==(nBuf&0x1ffff) );
assert( fd>2 );
+ assert( piErrno!=0 );
nBuf &= 0x1ffff;
TIMER_START;
#else
do{
i64 iSeek = lseek(fd, iOff, SEEK_SET);
- SimulateIOError( iSeek-- );
-
- if( iSeek!=iOff ){
- if( piErrno ) *piErrno = (iSeek==-1 ? errno : 0);
- return -1;
+ SimulateIOError( iSeek = -1 );
+ if( iSeek<0 ){
+ rc = -1;
+ break;
}
rc = osWrite(fd, pBuf, nBuf);
}while( rc<0 && errno==EINTR );
TIMER_END;
OSTRACE(("WRITE %-3d %5d %7lld %llu\n", fd, rc, iOff, TIMER_ELAPSED));
- if( rc<0 && piErrno ) *piErrno = errno;
+ if( rc<0 ) *piErrno = errno;
return rc;
}
/* If this is a database file (not a journal, master-journal or temp
** file), the bytes in the locking range should never be read or written. */
#if 0
- assert( pFile->pUnused==0
+ assert( pFile->pPreallocatedUnused==0
|| offset>=PENDING_BYTE+512
|| offset+amt<=PENDING_BYTE
);
}
#endif
-#if SQLITE_MAX_MMAP_SIZE>0
+#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
/* Deal with as much of this write request as possible by transfering
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
#endif
/* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
- ** no-op
+ ** no-op. But go ahead and call fstat() to validate the file
+ ** descriptor as we need a method to provoke a failure during
+ ** coverate testing.
*/
#ifdef SQLITE_NO_SYNC
- rc = SQLITE_OK;
+ {
+ struct stat buf;
+ rc = osFstat(fd, &buf);
+ }
#elif HAVE_FULLFSYNC
if( fullSync ){
rc = osFcntl(fd, F_FULLFSYNC, 0);
char zDirname[MAX_PATHNAME+1];
sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
- for(ii=(int)strlen(zDirname); ii>1 && zDirname[ii]!='/'; ii--);
+ for(ii=(int)strlen(zDirname); ii>0 && zDirname[ii]!='/'; ii--);
if( ii>0 ){
zDirname[ii] = '\0';
- fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
- if( fd>=0 ){
- OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
- }
+ }else{
+ if( zDirname[0]!='/' ) zDirname[0] = '.';
+ zDirname[1] = 0;
+ }
+ fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
+ if( fd>=0 ){
+ OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
}
*pFd = fd;
- return (fd>=0?SQLITE_OK:unixLogError(SQLITE_CANTOPEN_BKPT, "open", zDirname));
+ if( fd>=0 ) return SQLITE_OK;
+ return unixLogError(SQLITE_CANTOPEN_BKPT, "openDirectory", zDirname);
}
/*
OSTRACE(("DIRSYNC %s (have_fullfsync=%d fullsync=%d)\n", pFile->zPath,
HAVE_FULLFSYNC, isFullsync));
rc = osOpenDirectory(pFile->zPath, &dirfd);
- if( rc==SQLITE_OK && dirfd>=0 ){
+ if( rc==SQLITE_OK ){
full_fsync(dirfd, 0, 0);
robust_close(pFile, dirfd, __LINE__);
- }else if( rc==SQLITE_CANTOPEN ){
+ }else{
+ assert( rc==SQLITE_CANTOPEN );
rc = SQLITE_OK;
}
pFile->ctrlFlags &= ~UNIXFILE_DIRSYNC;
int nWrite = 0; /* Number of bytes written by seekAndWrite */
i64 iWrite; /* Next offset to write to */
- iWrite = ((buf.st_size + 2*nBlk - 1)/nBlk)*nBlk-1;
+ iWrite = (buf.st_size/nBlk)*nBlk + nBlk - 1;
assert( iWrite>=buf.st_size );
- assert( (iWrite/nBlk)==((buf.st_size+nBlk-1)/nBlk) );
assert( ((iWrite+1)%nBlk)==0 );
- for(/*no-op*/; iWrite<nSize; iWrite+=nBlk ){
+ for(/*no-op*/; iWrite<nSize+nBlk-1; iWrite+=nBlk ){
+ if( iWrite>=nSize ) iWrite = nSize - 1;
nWrite = seekAndWrite(pFile, iWrite, "", 1);
if( nWrite!=1 ) return SQLITE_IOERR_WRITE;
}
- if( nWrite==0 || (nSize%nBlk) ){
- nWrite = seekAndWrite(pFile, nSize-1, "", 1);
- if( nWrite!=1 ) return SQLITE_IOERR_WRITE;
- }
#endif
}
}
static int unixFileControl(sqlite3_file *id, int op, void *pArg){
unixFile *pFile = (unixFile*)id;
switch( op ){
- case SQLITE_FCNTL_WAL_BLOCK: {
- /* pFile->ctrlFlags |= UNIXFILE_BLOCK; // Deferred feature */
- return SQLITE_OK;
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE);
+ return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK;
+ }
+ case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: {
+ int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE);
+ return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK;
}
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
case SQLITE_FCNTL_LOCKSTATE: {
*(int*)pArg = pFile->eFileLock;
return SQLITE_OK;
*(int*)pArg = fileHasMoved(pFile);
return SQLITE_OK;
}
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
+ case SQLITE_FCNTL_LOCK_TIMEOUT: {
+ pFile->iBusyTimeout = *(int*)pArg;
+ return SQLITE_OK;
+ }
+#endif
#if SQLITE_MAX_MMAP_SIZE>0
case SQLITE_FCNTL_MMAP_SIZE: {
i64 newLimit = *(i64*)pArg;
if( newLimit>sqlite3GlobalConfig.mxMmap ){
newLimit = sqlite3GlobalConfig.mxMmap;
}
+
+ /* The value of newLimit may be eventually cast to (size_t) and passed
+ ** to mmap(). Restrict its value to 2GB if (size_t) is not at least a
+ ** 64-bit type. */
+ if( newLimit>0 && sizeof(size_t)<8 ){
+ newLimit = (newLimit & 0x7FFFFFFF);
+ }
+
*(i64*)pArg = pFile->mmapSizeMax;
if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){
pFile->mmapSizeMax = newLimit;
}
/*
-** Return the sector size in bytes of the underlying block device for
-** the specified file. This is almost always 512 bytes, but may be
-** larger for some devices.
+** If pFd->sectorSize is non-zero when this function is called, it is a
+** no-op. Otherwise, the values of pFd->sectorSize and
+** pFd->deviceCharacteristics are set according to the file-system
+** characteristics.
**
-** SQLite code assumes this function cannot fail. It also assumes that
-** if two files are created in the same file-system directory (i.e.
-** a database and its journal file) that the sector size will be the
-** same for both.
+** There are two versions of this function. One for QNX and one for all
+** other systems.
*/
-#ifndef __QNXNTO__
-static int unixSectorSize(sqlite3_file *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- return SQLITE_DEFAULT_SECTOR_SIZE;
-}
-#endif
+#ifndef __QNXNTO__
+static void setDeviceCharacteristics(unixFile *pFd){
+ assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 );
+ if( pFd->sectorSize==0 ){
+#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int res;
+ u32 f = 0;
-/*
-** The following version of unixSectorSize() is optimized for QNX.
-*/
-#ifdef __QNXNTO__
+ /* Check for support for F2FS atomic batch writes. */
+ res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f);
+ if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){
+ pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC;
+ }
+#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */
+
+ /* Set the POWERSAFE_OVERWRITE flag if requested. */
+ if( pFd->ctrlFlags & UNIXFILE_PSOW ){
+ pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
+ }
+
+ pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
+ }
+}
+#else
#include <sys/dcmd_blk.h>
#include <sys/statvfs.h>
-static int unixSectorSize(sqlite3_file *id){
- unixFile *pFile = (unixFile*)id;
+static void setDeviceCharacteristics(unixFile *pFile){
if( pFile->sectorSize == 0 ){
struct statvfs fsInfo;
pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
pFile->deviceCharacteristics = 0;
if( fstatvfs(pFile->h, &fsInfo) == -1 ) {
- return pFile->sectorSize;
+ return;
}
if( !strcmp(fsInfo.f_basetype, "tmp") ) {
pFile->deviceCharacteristics = 0;
pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
}
- return pFile->sectorSize;
}
-#endif /* __QNXNTO__ */
+#endif
+
+/*
+** Return the sector size in bytes of the underlying block device for
+** the specified file. This is almost always 512 bytes, but may be
+** larger for some devices.
+**
+** SQLite code assumes this function cannot fail. It also assumes that
+** if two files are created in the same file-system directory (i.e.
+** a database and its journal file) that the sector size will be the
+** same for both.
+*/
+static int unixSectorSize(sqlite3_file *id){
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->sectorSize;
+}
/*
** Return the device characteristics for the file.
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
- unixFile *p = (unixFile*)id;
- int rc = 0;
-#ifdef __QNXNTO__
- if( p->sectorSize==0 ) unixSectorSize(id);
- rc = p->deviceCharacteristics;
-#endif
- if( p->ctrlFlags & UNIXFILE_PSOW ){
- rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
- }
- return rc;
+ unixFile *pFd = (unixFile*)id;
+ setDeviceCharacteristics(pFd);
+ return pFd->deviceCharacteristics;
}
#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
int szRegion; /* Size of shared-memory regions */
u16 nRegion; /* Size of array apRegion */
u8 isReadonly; /* True if read-only */
+ u8 isUnlocked; /* True if no DMS lock held */
char **apRegion; /* Array of mapped shared-memory regions */
int nRef; /* Number of unixShm objects pointing to this */
unixShm *pFirst; /* All unixShm objects pointing to this */
/* Access to the unixShmNode object is serialized by the caller */
pShmNode = pFile->pInode->pShmNode;
- assert( sqlite3_mutex_held(pShmNode->mutex) || pShmNode->nRef==0 );
+ assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->mutex) );
/* Shared locks never span more than one byte */
assert( n==1 || lockType!=F_RDLCK );
/* Locks are within range */
- assert( n>=1 && n<SQLITE_SHM_NLOCK );
+ assert( n>=1 && n<=SQLITE_SHM_NLOCK );
if( pShmNode->h>=0 ){
- int lkType;
/* Initialize the locking parameters */
- memset(&f, 0, sizeof(f));
f.l_type = lockType;
f.l_whence = SEEK_SET;
f.l_start = ofst;
f.l_len = n;
-
- lkType = (pFile->ctrlFlags & UNIXFILE_BLOCK)!=0 ? F_SETLKW : F_SETLK;
- rc = osFcntl(pShmNode->h, lkType, &f);
+ rc = osSetPosixAdvisoryLock(pShmNode->h, &f, pFile);
rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY;
- pFile->ctrlFlags &= ~UNIXFILE_BLOCK;
}
/* Update the global lock state and do debug tracing */
static void unixShmPurge(unixFile *pFd){
unixShmNode *p = pFd->pInode->pShmNode;
assert( unixMutexHeld() );
- if( p && p->nRef==0 ){
+ if( p && ALWAYS(p->nRef==0) ){
int nShmPerMap = unixShmRegionPerMap();
int i;
assert( p->pInode==pFd->pInode );
}
}
+/*
+** The DMS lock has not yet been taken on shm file pShmNode. Attempt to
+** take it now. Return SQLITE_OK if successful, or an SQLite error
+** code otherwise.
+**
+** If the DMS cannot be locked because this is a readonly_shm=1
+** connection and no other process already holds a lock, return
+** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1.
+*/
+static int unixLockSharedMemory(unixFile *pDbFd, unixShmNode *pShmNode){
+ struct flock lock;
+ int rc = SQLITE_OK;
+
+ /* Use F_GETLK to determine the locks other processes are holding
+ ** on the DMS byte. If it indicates that another process is holding
+ ** a SHARED lock, then this process may also take a SHARED lock
+ ** and proceed with opening the *-shm file.
+ **
+ ** Or, if no other process is holding any lock, then this process
+ ** is the first to open it. In this case take an EXCLUSIVE lock on the
+ ** DMS byte and truncate the *-shm file to zero bytes in size. Then
+ ** downgrade to a SHARED lock on the DMS byte.
+ **
+ ** If another process is holding an EXCLUSIVE lock on the DMS byte,
+ ** return SQLITE_BUSY to the caller (it will try again). An earlier
+ ** version of this code attempted the SHARED lock at this point. But
+ ** this introduced a subtle race condition: if the process holding
+ ** EXCLUSIVE failed just before truncating the *-shm file, then this
+ ** process might open and use the *-shm file without truncating it.
+ ** And if the *-shm file has been corrupted by a power failure or
+ ** system crash, the database itself may also become corrupt. */
+ lock.l_whence = SEEK_SET;
+ lock.l_start = UNIX_SHM_DMS;
+ lock.l_len = 1;
+ lock.l_type = F_WRLCK;
+ if( osFcntl(pShmNode->h, F_GETLK, &lock)!=0 ) {
+ rc = SQLITE_IOERR_LOCK;
+ }else if( lock.l_type==F_UNLCK ){
+ if( pShmNode->isReadonly ){
+ pShmNode->isUnlocked = 1;
+ rc = SQLITE_READONLY_CANTINIT;
+ }else{
+ rc = unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1);
+ if( rc==SQLITE_OK && robust_ftruncate(pShmNode->h, 0) ){
+ rc = unixLogError(SQLITE_IOERR_SHMOPEN,"ftruncate",pShmNode->zFilename);
+ }
+ }
+ }else if( lock.l_type==F_WRLCK ){
+ rc = SQLITE_BUSY;
+ }
+
+ if( rc==SQLITE_OK ){
+ assert( lock.l_type==F_UNLCK || lock.l_type==F_RDLCK );
+ rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1);
+ }
+ return rc;
+}
+
/*
** Open a shared-memory area associated with open database file pDbFd.
** This particular implementation uses mmapped files.
static int unixOpenSharedMemory(unixFile *pDbFd){
struct unixShm *p = 0; /* The connection to be opened */
struct unixShmNode *pShmNode; /* The underlying mmapped file */
- int rc; /* Result code */
+ int rc = SQLITE_OK; /* Result code */
unixInodeInfo *pInode; /* The inode of fd */
- char *zShmFilename; /* Name of the file used for SHM */
+ char *zShm; /* Name of the file used for SHM */
int nShmFilename; /* Size of the SHM filename in bytes */
/* Allocate space for the new unixShm object. */
p = sqlite3_malloc64( sizeof(*p) );
- if( p==0 ) return SQLITE_NOMEM;
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
memset(p, 0, sizeof(*p));
assert( pDbFd->pShm==0 );
** a new *-shm file is created, an attempt will be made to create it
** with the same permissions.
*/
- if( osFstat(pDbFd->h, &sStat) && pInode->bProcessLock==0 ){
+ if( osFstat(pDbFd->h, &sStat) ){
rc = SQLITE_IOERR_FSTAT;
goto shm_open_err;
}
#endif
pShmNode = sqlite3_malloc64( sizeof(*pShmNode) + nShmFilename );
if( pShmNode==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto shm_open_err;
}
memset(pShmNode, 0, sizeof(*pShmNode)+nShmFilename);
- zShmFilename = pShmNode->zFilename = (char*)&pShmNode[1];
+ zShm = pShmNode->zFilename = (char*)&pShmNode[1];
#ifdef SQLITE_SHM_DIRECTORY
- sqlite3_snprintf(nShmFilename, zShmFilename,
+ sqlite3_snprintf(nShmFilename, zShm,
SQLITE_SHM_DIRECTORY "/sqlite-shm-%x-%x",
(u32)sStat.st_ino, (u32)sStat.st_dev);
#else
- sqlite3_snprintf(nShmFilename, zShmFilename, "%s-shm", zBasePath);
- sqlite3FileSuffix3(pDbFd->zPath, zShmFilename);
+ sqlite3_snprintf(nShmFilename, zShm, "%s-shm", zBasePath);
+ sqlite3FileSuffix3(pDbFd->zPath, zShm);
#endif
pShmNode->h = -1;
pDbFd->pInode->pShmNode = pShmNode;
pShmNode->pInode = pDbFd->pInode;
- pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
- if( pShmNode->mutex==0 ){
- rc = SQLITE_NOMEM;
- goto shm_open_err;
+ if( sqlite3GlobalConfig.bCoreMutex ){
+ pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
+ if( pShmNode->mutex==0 ){
+ rc = SQLITE_NOMEM_BKPT;
+ goto shm_open_err;
+ }
}
if( pInode->bProcessLock==0 ){
- int openFlags = O_RDWR | O_CREAT;
- if( sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
- openFlags = O_RDONLY;
- pShmNode->isReadonly = 1;
+ if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
+ pShmNode->h = robust_open(zShm, O_RDWR|O_CREAT, (sStat.st_mode&0777));
}
- pShmNode->h = robust_open(zShmFilename, openFlags, (sStat.st_mode&0777));
if( pShmNode->h<0 ){
- rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename);
- goto shm_open_err;
+ pShmNode->h = robust_open(zShm, O_RDONLY, (sStat.st_mode&0777));
+ if( pShmNode->h<0 ){
+ rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShm);
+ goto shm_open_err;
+ }
+ pShmNode->isReadonly = 1;
}
/* If this process is running as root, make sure that the SHM file
** is owned by the same user that owns the original database. Otherwise,
** the original owner will not be able to connect.
*/
- osFchown(pShmNode->h, sStat.st_uid, sStat.st_gid);
-
- /* Check to see if another process is holding the dead-man switch.
- ** If not, truncate the file to zero length.
- */
- rc = SQLITE_OK;
- if( unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){
- if( robust_ftruncate(pShmNode->h, 0) ){
- rc = unixLogError(SQLITE_IOERR_SHMOPEN, "ftruncate", zShmFilename);
- }
- }
- if( rc==SQLITE_OK ){
- rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1);
- }
- if( rc ) goto shm_open_err;
+ robustFchown(pShmNode->h, sStat.st_uid, sStat.st_gid);
+
+ rc = unixLockSharedMemory(pDbFd, pShmNode);
+ if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err;
}
}
p->pNext = pShmNode->pFirst;
pShmNode->pFirst = p;
sqlite3_mutex_leave(pShmNode->mutex);
- return SQLITE_OK;
+ return rc;
/* Jump here on any error */
shm_open_err:
p = pDbFd->pShm;
pShmNode = p->pShmNode;
sqlite3_mutex_enter(pShmNode->mutex);
+ if( pShmNode->isUnlocked ){
+ rc = unixLockSharedMemory(pDbFd, pShmNode);
+ if( rc!=SQLITE_OK ) goto shmpage_out;
+ pShmNode->isUnlocked = 0;
+ }
assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );
assert( pShmNode->pInode==pDbFd->pInode );
assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 );
/* Write to the last byte of each newly allocated or extended page */
assert( (nByte % pgsz)==0 );
for(iPg=(sStat.st_size/pgsz); iPg<(nByte/pgsz); iPg++){
- if( seekAndWriteFd(pShmNode->h, iPg*pgsz + pgsz-1, "", 1, 0)!=1 ){
+ int x = 0;
+ if( seekAndWriteFd(pShmNode->h, iPg*pgsz + pgsz-1, "", 1, &x)!=1 ){
const char *zFile = pShmNode->zFilename;
rc = unixLogError(SQLITE_IOERR_SHMSIZE, "write", zFile);
goto shmpage_out;
pShmNode->apRegion, nReqRegion*sizeof(char *)
);
if( !apNew ){
- rc = SQLITE_IOERR_NOMEM;
+ rc = SQLITE_IOERR_NOMEM_BKPT;
goto shmpage_out;
}
pShmNode->apRegion = apNew;
}else{
pMem = sqlite3_malloc64(szRegion);
if( pMem==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto shmpage_out;
}
memset(pMem, 0, szRegion);
assert( pFd->mmapSizeActual>=pFd->mmapSize );
assert( MAP_FAILED!=0 );
+#ifdef SQLITE_MMAP_READWRITE
if( (pFd->ctrlFlags & UNIXFILE_RDONLY)==0 ) flags |= PROT_WRITE;
+#endif
if( pOrig ){
#if HAVE_MREMAP
** recreated as a result of outstanding references) or an SQLite error
** code otherwise.
*/
-static int unixMapfile(unixFile *pFd, i64 nByte){
- i64 nMap = nByte;
- int rc;
-
+static int unixMapfile(unixFile *pFd, i64 nMap){
assert( nMap>=0 || pFd->nFetchOut==0 );
+ assert( nMap>0 || (pFd->mmapSize==0 && pFd->pMapRegion==0) );
if( pFd->nFetchOut>0 ) return SQLITE_OK;
if( nMap<0 ){
struct stat statbuf; /* Low-level file information */
- rc = osFstat(pFd->h, &statbuf);
- if( rc!=SQLITE_OK ){
+ if( osFstat(pFd->h, &statbuf) ){
return SQLITE_IOERR_FSTAT;
}
nMap = statbuf.st_size;
nMap = pFd->mmapSizeMax;
}
+ assert( nMap>0 || (pFd->mmapSize==0 && pFd->pMapRegion==0) );
if( nMap!=pFd->mmapSize ){
- if( nMap>0 ){
- unixRemapfile(pFd, nMap);
- }else{
- unixUnmapfile(pFd);
- }
+ unixRemapfile(pFd, nMap);
}
return SQLITE_OK;
assert( pNew->pInode==NULL );
- /* Usually the path zFilename should not be a relative pathname. The
- ** exception is when opening the proxy "conch" file in builds that
- ** include the special Apple locking styles.
- */
-#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
- assert( zFilename==0 || zFilename[0]=='/'
- || pVfs->pAppData==(void*)&autolockIoFinder );
-#else
- assert( zFilename==0 || zFilename[0]=='/' );
-#endif
-
/* No locking occurs in temporary files */
assert( zFilename!=0 || (ctrlFlags & UNIXFILE_NOLOCK)!=0 );
pNew->pId = vxworksFindFileId(zFilename);
if( pNew->pId==0 ){
ctrlFlags |= UNIXFILE_NOLOCK;
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
#endif
afpLockingContext *pCtx;
pNew->lockingContext = pCtx = sqlite3_malloc64( sizeof(*pCtx) );
if( pCtx==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
/* NB: zFilename exists and remains valid until the file is closed
** according to requirement F11141. So we do not need to make a
nFilename = (int)strlen(zFilename) + 6;
zLockFile = (char *)sqlite3_malloc64(nFilename);
if( zLockFile==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
sqlite3_snprintf(nFilename, zLockFile, "%s" DOTLOCK_SUFFIX, zFilename);
}
if( zSemName[n]=='/' ) zSemName[n] = '_';
pNew->pInode->pSem = sem_open(zSemName, O_CREAT, 0666, 1);
if( pNew->pInode->pSem == SEM_FAILED ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
pNew->pInode->aSemName[0] = '\0';
}
}
*/
static const char *unixTempFileDir(void){
static const char *azDirs[] = {
- 0,
0,
0,
"/var/tmp",
"/usr/tmp",
"/tmp",
- 0 /* List terminator */
+ "."
};
- unsigned int i;
+ unsigned int i = 0;
struct stat buf;
- const char *zDir = 0;
-
- azDirs[0] = sqlite3_temp_directory;
- if( !azDirs[1] ) azDirs[1] = getenv("SQLITE_TMPDIR");
- if( !azDirs[2] ) azDirs[2] = getenv("TMPDIR");
- for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); zDir=azDirs[i++]){
- if( zDir==0 ) continue;
- if( osStat(zDir, &buf) ) continue;
- if( !S_ISDIR(buf.st_mode) ) continue;
- if( osAccess(zDir, 07) ) continue;
- break;
+ const char *zDir = sqlite3_temp_directory;
+
+ if( !azDirs[0] ) azDirs[0] = getenv("SQLITE_TMPDIR");
+ if( !azDirs[1] ) azDirs[1] = getenv("TMPDIR");
+ while(1){
+ if( zDir!=0
+ && osStat(zDir, &buf)==0
+ && S_ISDIR(buf.st_mode)
+ && osAccess(zDir, 03)==0
+ ){
+ return zDir;
+ }
+ if( i>=sizeof(azDirs)/sizeof(azDirs[0]) ) break;
+ zDir = azDirs[i++];
}
- return zDir;
+ return 0;
}
/*
** pVfs->mxPathname bytes.
*/
static int unixGetTempname(int nBuf, char *zBuf){
- static const unsigned char zChars[] =
- "abcdefghijklmnopqrstuvwxyz"
- "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
- "0123456789";
- unsigned int i, j;
const char *zDir;
+ int iLimit = 0;
/* It's odd to simulate an io-error here, but really this is just
** using the io-error infrastructure to test that SQLite handles this
** function failing.
*/
+ zBuf[0] = 0;
SimulateIOError( return SQLITE_IOERR );
zDir = unixTempFileDir();
- if( zDir==0 ) zDir = ".";
-
- /* Check that the output buffer is large enough for the temporary file
- ** name. If it is not, return SQLITE_ERROR.
- */
- if( (strlen(zDir) + strlen(SQLITE_TEMP_FILE_PREFIX) + 18) >= (size_t)nBuf ){
- return SQLITE_ERROR;
- }
-
+ if( zDir==0 ) return SQLITE_IOERR_GETTEMPPATH;
do{
- sqlite3_snprintf(nBuf-18, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX, zDir);
- j = (int)strlen(zBuf);
- sqlite3_randomness(15, &zBuf[j]);
- for(i=0; i<15; i++, j++){
- zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ];
- }
- zBuf[j] = 0;
- zBuf[j+1] = 0;
+ u64 r;
+ sqlite3_randomness(sizeof(r), &r);
+ assert( nBuf>2 );
+ zBuf[nBuf-2] = 0;
+ sqlite3_snprintf(nBuf, zBuf, "%s/"SQLITE_TEMP_FILE_PREFIX"%llx%c",
+ zDir, r, 0);
+ if( zBuf[nBuf-2]!=0 || (iLimit++)>10 ) return SQLITE_ERROR;
}while( osAccess(zBuf,0)==0 );
return SQLITE_OK;
}
#if !OS_VXWORKS
struct stat sStat; /* Results of stat() call */
+ unixEnterMutex();
+
/* A stat() call may fail for various reasons. If this happens, it is
** almost certain that an open() call on the same path will also fail.
** For this reason, if an error occurs in the stat() call here, it is
**
** Even if a subsequent open() call does succeed, the consequences of
** not searching for a reusable file descriptor are not dire. */
- if( 0==osStat(zPath, &sStat) ){
+ if( nUnusedFd>0 && 0==osStat(zPath, &sStat) ){
unixInodeInfo *pInode;
- unixEnterMutex();
pInode = inodeList;
while( pInode && (pInode->fileId.dev!=sStat.st_dev
- || pInode->fileId.ino!=sStat.st_ino) ){
+ || pInode->fileId.ino!=(u64)sStat.st_ino) ){
pInode = pInode->pNext;
}
if( pInode ){
for(pp=&pInode->pUnused; *pp && (*pp)->flags!=flags; pp=&((*pp)->pNext));
pUnused = *pp;
if( pUnused ){
+ nUnusedFd--;
*pp = pUnused->pNext;
}
}
- unixLeaveMutex();
}
+ unixLeaveMutex();
#endif /* if !OS_VXWORKS */
return pUnused;
}
+/*
+** Find the mode, uid and gid of file zFile.
+*/
+static int getFileMode(
+ const char *zFile, /* File name */
+ mode_t *pMode, /* OUT: Permissions of zFile */
+ uid_t *pUid, /* OUT: uid of zFile. */
+ gid_t *pGid /* OUT: gid of zFile. */
+){
+ struct stat sStat; /* Output of stat() on database file */
+ int rc = SQLITE_OK;
+ if( 0==osStat(zFile, &sStat) ){
+ *pMode = sStat.st_mode & 0777;
+ *pUid = sStat.st_uid;
+ *pGid = sStat.st_gid;
+ }else{
+ rc = SQLITE_IOERR_FSTAT;
+ }
+ return rc;
+}
+
/*
** This function is called by unixOpen() to determine the unix permissions
** to create new files with. If no error occurs, then SQLITE_OK is returned
if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
char zDb[MAX_PATHNAME+1]; /* Database file path */
int nDb; /* Number of valid bytes in zDb */
- struct stat sStat; /* Output of stat() on database file */
/* zPath is a path to a WAL or journal file. The following block derives
** the path to the associated database file from zPath. This block handles
** used by the test_multiplex.c module.
*/
nDb = sqlite3Strlen30(zPath) - 1;
-#ifdef SQLITE_ENABLE_8_3_NAMES
- while( nDb>0 && sqlite3Isalnum(zPath[nDb]) ) nDb--;
- if( nDb==0 || zPath[nDb]!='-' ) return SQLITE_OK;
-#else
while( zPath[nDb]!='-' ){
- assert( nDb>0 );
- assert( zPath[nDb]!='\n' );
+ /* In normal operation, the journal file name will always contain
+ ** a '-' character. However in 8+3 filename mode, or if a corrupt
+ ** rollback journal specifies a master journal with a goofy name, then
+ ** the '-' might be missing. */
+ if( nDb==0 || zPath[nDb]=='.' ) return SQLITE_OK;
nDb--;
}
-#endif
memcpy(zDb, zPath, nDb);
zDb[nDb] = '\0';
- if( 0==osStat(zDb, &sStat) ){
- *pMode = sStat.st_mode & 0777;
- *pUid = sStat.st_uid;
- *pGid = sStat.st_gid;
- }else{
- rc = SQLITE_IOERR_FSTAT;
- }
+ rc = getFileMode(zDb, pMode, pUid, pGid);
}else if( flags & SQLITE_OPEN_DELETEONCLOSE ){
*pMode = 0600;
+ }else if( flags & SQLITE_OPEN_URI ){
+ /* If this is a main database file and the file was opened using a URI
+ ** filename, check for the "modeof" parameter. If present, interpret
+ ** its value as a filename and try to copy the mode, uid and gid from
+ ** that file. */
+ const char *z = sqlite3_uri_parameter(zPath, "modeof");
+ if( z ){
+ rc = getFileMode(z, pMode, pUid, pGid);
+ }
}
return rc;
}
** a file-descriptor on the directory too. The first time unixSync()
** is called the directory file descriptor will be fsync()ed and close()d.
*/
- int syncDir = (isCreate && (
+ int isNewJrnl = (isCreate && (
eType==SQLITE_OPEN_MASTER_JOURNAL
|| eType==SQLITE_OPEN_MAIN_JOURNAL
|| eType==SQLITE_OPEN_WAL
randomnessPid = osGetpid(0);
sqlite3_randomness(0,0);
}
-
memset(p, 0, sizeof(unixFile));
if( eType==SQLITE_OPEN_MAIN_DB ){
}else{
pUnused = sqlite3_malloc64(sizeof(*pUnused));
if( !pUnused ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
}
- p->pUnused = pUnused;
+ p->pPreallocatedUnused = pUnused;
/* Database filenames are double-zero terminated if they are not
** URIs with parameters. Hence, they can always be passed into
}else if( !zName ){
/* If zName is NULL, the upper layer is requesting a temp file. */
- assert(isDelete && !syncDir);
- rc = unixGetTempname(MAX_PATHNAME+2, zTmpname);
+ assert(isDelete && !isNewJrnl);
+ rc = unixGetTempname(pVfs->mxPathname, zTmpname);
if( rc!=SQLITE_OK ){
return rc;
}
gid_t gid; /* Groupid for the file */
rc = findCreateFileMode(zName, flags, &openMode, &uid, &gid);
if( rc!=SQLITE_OK ){
- assert( !p->pUnused );
+ assert( !p->pPreallocatedUnused );
assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL );
return rc;
}
fd = robust_open(zName, openFlags, openMode);
OSTRACE(("OPENX %-3d %s 0%o\n", fd, zName, openFlags));
- if( fd<0 && errno!=EISDIR && isReadWrite && !isExclusive ){
- /* Failed to open the file for read/write access. Try read-only. */
- flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
- openFlags &= ~(O_RDWR|O_CREAT);
- flags |= SQLITE_OPEN_READONLY;
- openFlags |= O_RDONLY;
- isReadonly = 1;
- fd = robust_open(zName, openFlags, openMode);
+ assert( !isExclusive || (openFlags & O_CREAT)!=0 );
+ if( fd<0 ){
+ if( isNewJrnl && errno==EACCES && osAccess(zName, F_OK) ){
+ /* If unable to create a journal because the directory is not
+ ** writable, change the error code to indicate that. */
+ rc = SQLITE_READONLY_DIRECTORY;
+ }else if( errno!=EISDIR && isReadWrite ){
+ /* Failed to open the file for read/write access. Try read-only. */
+ flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
+ openFlags &= ~(O_RDWR|O_CREAT);
+ flags |= SQLITE_OPEN_READONLY;
+ openFlags |= O_RDONLY;
+ isReadonly = 1;
+ fd = robust_open(zName, openFlags, openMode);
+ }
}
if( fd<0 ){
- rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
+ int rc2 = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
+ if( rc==SQLITE_OK ) rc = rc2;
goto open_finished;
}
** the same as the original database.
*/
if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
- osFchown(fd, uid, gid);
+ robustFchown(fd, uid, gid);
}
}
assert( fd>=0 );
*pOutFlags = flags;
}
- if( p->pUnused ){
- p->pUnused->fd = fd;
- p->pUnused->flags = flags;
+ if( p->pPreallocatedUnused ){
+ p->pPreallocatedUnused->fd = fd;
+ p->pPreallocatedUnused->flags = flags;
}
if( isDelete ){
zPath = sqlite3_mprintf("%s", zName);
if( zPath==0 ){
robust_close(p, fd, __LINE__);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
#else
osUnlink(zName);
p->openFlags = openFlags;
}
#endif
-
- noLock = eType!=SQLITE_OPEN_MAIN_DB;
-
#if defined(__APPLE__) || SQLITE_ENABLE_LOCKING_STYLE
if( fstatfs(fd, &fsInfo) == -1 ){
/* Set up appropriate ctrlFlags */
if( isDelete ) ctrlFlags |= UNIXFILE_DELETE;
if( isReadonly ) ctrlFlags |= UNIXFILE_RDONLY;
+ noLock = eType!=SQLITE_OPEN_MAIN_DB;
if( noLock ) ctrlFlags |= UNIXFILE_NOLOCK;
- if( syncDir ) ctrlFlags |= UNIXFILE_DIRSYNC;
+ if( isNewJrnl ) ctrlFlags |= UNIXFILE_DIRSYNC;
if( flags & SQLITE_OPEN_URI ) ctrlFlags |= UNIXFILE_URI;
#if SQLITE_ENABLE_LOCKING_STYLE
}
#endif
+ assert( zPath==0 || zPath[0]=='/'
+ || eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_MAIN_JOURNAL
+ );
rc = fillInUnixFile(pVfs, fd, pFile, zPath, ctrlFlags);
open_finished:
if( rc!=SQLITE_OK ){
- sqlite3_free(p->pUnused);
+ sqlite3_free(p->pPreallocatedUnused);
}
return rc;
}
int fd;
rc = osOpenDirectory(zPath, &fd);
if( rc==SQLITE_OK ){
-#if OS_VXWORKS
- if( fsync(fd)==-1 )
-#else
- if( fsync(fd) )
-#endif
- {
+ if( full_fsync(fd,0,0) ){
rc = unixLogError(SQLITE_IOERR_DIR_FSYNC, "fsync", zPath);
}
robust_close(0, fd, __LINE__);
- }else if( rc==SQLITE_CANTOPEN ){
+ }else{
+ assert( rc==SQLITE_CANTOPEN );
rc = SQLITE_OK;
}
}
int flags, /* What do we want to learn about the zPath file? */
int *pResOut /* Write result boolean here */
){
- int amode = 0;
UNUSED_PARAMETER(NotUsed);
SimulateIOError( return SQLITE_IOERR_ACCESS; );
- switch( flags ){
- case SQLITE_ACCESS_EXISTS:
- amode = F_OK;
- break;
- case SQLITE_ACCESS_READWRITE:
- amode = W_OK|R_OK;
- break;
- case SQLITE_ACCESS_READ:
- amode = R_OK;
- break;
+ assert( pResOut!=0 );
- default:
- assert(!"Invalid flags argument");
- }
- *pResOut = (osAccess(zPath, amode)==0);
- if( flags==SQLITE_ACCESS_EXISTS && *pResOut ){
+ /* The spec says there are three possible values for flags. But only
+ ** two of them are actually used */
+ assert( flags==SQLITE_ACCESS_EXISTS || flags==SQLITE_ACCESS_READWRITE );
+
+ if( flags==SQLITE_ACCESS_EXISTS ){
struct stat buf;
- if( 0==osStat(zPath, &buf) && buf.st_size==0 ){
- *pResOut = 0;
- }
+ *pResOut = (0==osStat(zPath, &buf) && buf.st_size>0);
+ }else{
+ *pResOut = osAccess(zPath, W_OK|R_OK)==0;
}
return SQLITE_OK;
}
+/*
+**
+*/
+static int mkFullPathname(
+ const char *zPath, /* Input path */
+ char *zOut, /* Output buffer */
+ int nOut /* Allocated size of buffer zOut */
+){
+ int nPath = sqlite3Strlen30(zPath);
+ int iOff = 0;
+ if( zPath[0]!='/' ){
+ if( osGetcwd(zOut, nOut-2)==0 ){
+ return unixLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
+ }
+ iOff = sqlite3Strlen30(zOut);
+ zOut[iOff++] = '/';
+ }
+ if( (iOff+nPath+1)>nOut ){
+ /* SQLite assumes that xFullPathname() nul-terminates the output buffer
+ ** even if it returns an error. */
+ zOut[iOff] = '\0';
+ return SQLITE_CANTOPEN_BKPT;
+ }
+ sqlite3_snprintf(nOut-iOff, &zOut[iOff], "%s", zPath);
+ return SQLITE_OK;
+}
/*
** Turn a relative pathname into a full pathname. The relative path
int nOut, /* Size of output buffer in bytes */
char *zOut /* Output buffer */
){
+#if !defined(HAVE_READLINK) || !defined(HAVE_LSTAT)
+ return mkFullPathname(zPath, zOut, nOut);
+#else
+ int rc = SQLITE_OK;
+ int nByte;
+ int nLink = 1; /* Number of symbolic links followed so far */
+ const char *zIn = zPath; /* Input path for each iteration of loop */
+ char *zDel = 0;
+
+ assert( pVfs->mxPathname==MAX_PATHNAME );
+ UNUSED_PARAMETER(pVfs);
/* It's odd to simulate an io-error here, but really this is just
** using the io-error infrastructure to test that SQLite handles this
*/
SimulateIOError( return SQLITE_ERROR );
- assert( pVfs->mxPathname==MAX_PATHNAME );
- UNUSED_PARAMETER(pVfs);
+ do {
- zOut[nOut-1] = '\0';
- if( zPath[0]=='/' ){
- sqlite3_snprintf(nOut, zOut, "%s", zPath);
- }else{
- int nCwd;
- if( osGetcwd(zOut, nOut-1)==0 ){
- return unixLogError(SQLITE_CANTOPEN_BKPT, "getcwd", zPath);
+ /* Call stat() on path zIn. Set bLink to true if the path is a symbolic
+ ** link, or false otherwise. */
+ int bLink = 0;
+ struct stat buf;
+ if( osLstat(zIn, &buf)!=0 ){
+ if( errno!=ENOENT ){
+ rc = unixLogError(SQLITE_CANTOPEN_BKPT, "lstat", zIn);
+ }
+ }else{
+ bLink = S_ISLNK(buf.st_mode);
}
- nCwd = (int)strlen(zOut);
- sqlite3_snprintf(nOut-nCwd, &zOut[nCwd], "/%s", zPath);
- }
- return SQLITE_OK;
+
+ if( bLink ){
+ if( zDel==0 ){
+ zDel = sqlite3_malloc(nOut);
+ if( zDel==0 ) rc = SQLITE_NOMEM_BKPT;
+ }else if( ++nLink>SQLITE_MAX_SYMLINKS ){
+ rc = SQLITE_CANTOPEN_BKPT;
+ }
+
+ if( rc==SQLITE_OK ){
+ nByte = osReadlink(zIn, zDel, nOut-1);
+ if( nByte<0 ){
+ rc = unixLogError(SQLITE_CANTOPEN_BKPT, "readlink", zIn);
+ }else{
+ if( zDel[0]!='/' ){
+ int n;
+ for(n = sqlite3Strlen30(zIn); n>0 && zIn[n-1]!='/'; n--);
+ if( nByte+n+1>nOut ){
+ rc = SQLITE_CANTOPEN_BKPT;
+ }else{
+ memmove(&zDel[n], zDel, nByte+1);
+ memcpy(zDel, zIn, n);
+ nByte += n;
+ }
+ }
+ zDel[nByte] = '\0';
+ }
+ }
+
+ zIn = zDel;
+ }
+
+ assert( rc!=SQLITE_OK || zIn!=zOut || zIn[0]=='/' );
+ if( rc==SQLITE_OK && zIn!=zOut ){
+ rc = mkFullPathname(zIn, zOut, nOut);
+ }
+ if( bLink==0 ) break;
+ zIn = zOut;
+ }while( rc==SQLITE_OK );
+
+ sqlite3_free(zDel);
+ return rc;
+#endif /* HAVE_READLINK && HAVE_LSTAT */
}
*piNow = unixEpoch + 1000*(sqlite3_int64)sNow.tv_sec + sNow.tv_nsec/1000000;
#else
struct timeval sNow;
- if( gettimeofday(&sNow, 0)==0 ){
- *piNow = unixEpoch + 1000*(sqlite3_int64)sNow.tv_sec + sNow.tv_usec/1000;
- }else{
- rc = SQLITE_ERROR;
- }
+ (void)gettimeofday(&sNow, 0); /* Cannot fail given valid arguments */
+ *piNow = unixEpoch + 1000*(sqlite3_int64)sNow.tv_sec + sNow.tv_usec/1000;
#endif
#ifdef SQLITE_TEST
return rc;
}
+#ifndef SQLITE_OMIT_DEPRECATED
/*
** Find the current time (in Universal Coordinated Time). Write the
** current time and date as a Julian Day number into *prNow and
*prNow = i/86400000.0;
return rc;
}
+#else
+# define unixCurrentTime 0
+#endif
/*
-** We added the xGetLastError() method with the intention of providing
-** better low-level error messages when operating-system problems come up
-** during SQLite operation. But so far, none of that has been implemented
-** in the core. So this routine is never called. For now, it is merely
-** a place-holder.
+** The xGetLastError() method is designed to return a better
+** low-level error message when operating-system problems come up
+** during SQLite operation. Only the integer return code is currently
+** used.
*/
static int unixGetLastError(sqlite3_vfs *NotUsed, int NotUsed2, char *NotUsed3){
UNUSED_PARAMETER(NotUsed);
UNUSED_PARAMETER(NotUsed2);
UNUSED_PARAMETER(NotUsed3);
- return 0;
+ return errno;
}
}
buf[i] = lockPath[i];
}
- OSTRACE(("CREATELOCKPATH proxy lock path=%s pid=%d\n", lockPath, osGetpid(0)));
+ OSTRACE(("CREATELOCKPATH proxy lock path=%s pid=%d\n",lockPath,osGetpid(0)));
return 0;
}
}else{
pUnused = sqlite3_malloc64(sizeof(*pUnused));
if( !pUnused ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
}
if( fd<0 ){
pNew = (unixFile *)sqlite3_malloc64(sizeof(*pNew));
if( pNew==NULL ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto end_create_proxy;
}
memset(pNew, 0, sizeof(unixFile));
dummyVfs.zName = "dummy";
pUnused->fd = fd;
pUnused->flags = openFlags;
- pNew->pUnused = pUnused;
+ pNew->pPreallocatedUnused = pUnused;
rc = fillInUnixFile(&dummyVfs, fd, (sqlite3_file*)pNew, path, 0);
if( rc==SQLITE_OK ){
writeSize = PROXY_PATHINDEX + strlen(&writeBuffer[PROXY_PATHINDEX]);
robust_ftruncate(conchFile->h, writeSize);
rc = unixWrite((sqlite3_file *)conchFile, writeBuffer, writeSize, 0);
- fsync(conchFile->h);
+ full_fsync(conchFile->h,0,0);
/* If we created a new conch file (not just updated the contents of a
** valid conch file), try to match the permissions of the database
*/
if( tempLockPath ){
pCtx->lockProxyPath = sqlite3DbStrDup(0, tempLockPath);
if( !pCtx->lockProxyPath ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
}
}
** the name of the original database file. */
*pConchPath = conchPath = (char *)sqlite3_malloc64(len + 8);
if( conchPath==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memcpy(conchPath, dbPath, len+1);
pCtx = sqlite3_malloc64( sizeof(*pCtx) );
if( pCtx==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset(pCtx, 0, sizeof(*pCtx));
if( rc==SQLITE_OK ){
pCtx->dbPath = sqlite3DbStrDup(0, dbPath);
if( pCtx->dbPath==NULL ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
}
if( rc==SQLITE_OK ){
** Close a file that uses proxy locks.
*/
static int proxyClose(sqlite3_file *id) {
- if( id ){
+ if( ALWAYS(id) ){
unixFile *pFile = (unixFile*)id;
proxyLockingContext *pCtx = (proxyLockingContext *)pFile->lockingContext;
unixFile *lockProxy = pCtx->lockProxy;
** necessarily been initialized when this routine is called, and so they
** should not be used.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void){
+SQLITE_API int sqlite3_os_init(void){
/*
** The following macro defines an initializer for an sqlite3_vfs object.
** The name of the VFS is NAME. The pAppData is a pointer to a pointer
/* Double-check that the aSyscall[] array has been constructed
** correctly. See ticket [bb3a86e890c8e96ab] */
- assert( ArraySize(aSyscall)==25 );
+ assert( ArraySize(aSyscall)==29 );
/* Register all VFSes defined in the aVfs[] array */
for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
sqlite3_vfs_register(&aVfs[i], i==0);
}
+ unixBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1);
return SQLITE_OK;
}
** to release dynamically allocated objects. But not on unix.
** This routine is a no-op for unix.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void){
+SQLITE_API int sqlite3_os_end(void){
+ unixBigLock = 0;
return SQLITE_OK;
}
*/
#ifdef SQLITE_PERFORMANCE_TRACE
-/*
-** hwtime.h contains inline assembler code for implementing
+/*
+** hwtime.h contains inline assembler code for implementing
** high-performance timing routines.
*/
/************** Include hwtime.h in the middle of os_common.h ****************/
** This file contains inline asm code for retrieving "high-performance"
** counters for x86 class CPUs.
*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
+#ifndef SQLITE_HWTIME_H
+#define SQLITE_HWTIME_H
/*
** The following routine only works on pentium-class (or newer) processors.
#endif
-#endif /* !defined(_HWTIME_H_) */
+#endif /* !defined(SQLITE_HWTIME_H) */
/************** End of hwtime.h **********************************************/
/************** Continuing where we left off in os_common.h ******************/
** of code will give us the ability to simulate a disk I/O error. This
** is used for testing the I/O recovery logic.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */
-SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */
-SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */
-SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */
-SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */
-SQLITE_API int sqlite3_diskfull_pending = 0;
-SQLITE_API int sqlite3_diskfull = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_io_error_hit;
+SQLITE_API extern int sqlite3_io_error_hardhit;
+SQLITE_API extern int sqlite3_io_error_pending;
+SQLITE_API extern int sqlite3_io_error_persist;
+SQLITE_API extern int sqlite3_io_error_benign;
+SQLITE_API extern int sqlite3_diskfull_pending;
+SQLITE_API extern int sqlite3_diskfull;
#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
#define SimulateIOError(CODE) \
if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
#define SimulateIOErrorBenign(X)
#define SimulateIOError(A)
#define SimulateDiskfullError(A)
-#endif
+#endif /* defined(SQLITE_TEST) */
/*
** When testing, keep a count of the number of open files.
*/
-#ifdef SQLITE_TEST
-SQLITE_API int sqlite3_open_file_count = 0;
+#if defined(SQLITE_TEST)
+SQLITE_API extern int sqlite3_open_file_count;
#define OpenCounter(X) sqlite3_open_file_count+=(X)
#else
#define OpenCounter(X)
-#endif
+#endif /* defined(SQLITE_TEST) */
#endif /* !defined(_OS_COMMON_H_) */
# define NTDDI_WINBLUE 0x06030000
#endif
+#ifndef NTDDI_WINTHRESHOLD
+# define NTDDI_WINTHRESHOLD 0x06040000
+#endif
+
/*
** Check to see if the GetVersionEx[AW] functions are deprecated on the
** target system. GetVersionEx was first deprecated in Win8.1.
# endif
#endif
+/*
+** Check to see if the CreateFileMappingA function is supported on the
+** target system. It is unavailable when using "mincore.lib" on Win10.
+** When compiling for Windows 10, always assume "mincore.lib" is in use.
+*/
+#ifndef SQLITE_WIN32_CREATEFILEMAPPINGA
+# if defined(NTDDI_VERSION) && NTDDI_VERSION >= NTDDI_WINTHRESHOLD
+# define SQLITE_WIN32_CREATEFILEMAPPINGA 0
+# else
+# define SQLITE_WIN32_CREATEFILEMAPPINGA 1
+# endif
+#endif
+
/*
** This constant should already be defined (in the "WinDef.h" SDK file).
*/
#endif
};
+/*
+** The winVfsAppData structure is used for the pAppData member for all of the
+** Win32 VFS variants.
+*/
+typedef struct winVfsAppData winVfsAppData;
+struct winVfsAppData {
+ const sqlite3_io_methods *pMethod; /* The file I/O methods to use. */
+ void *pAppData; /* The extra pAppData, if any. */
+ BOOL bNoLock; /* Non-zero if locking is disabled. */
+};
+
/*
** Allowed values for winFile.ctrlFlags
*/
******************************************************************************
*/
#ifndef SQLITE_WIN32_HEAP_CREATE
-# define SQLITE_WIN32_HEAP_CREATE (TRUE)
+# define SQLITE_WIN32_HEAP_CREATE (TRUE)
+#endif
+
+/*
+ * This is the maximum possible initial size of the Win32-specific heap, in
+ * bytes.
+ */
+#ifndef SQLITE_WIN32_HEAP_MAX_INIT_SIZE
+# define SQLITE_WIN32_HEAP_MAX_INIT_SIZE (4294967295U)
+#endif
+
+/*
+ * This is the extra space for the initial size of the Win32-specific heap,
+ * in bytes. This value may be zero.
+ */
+#ifndef SQLITE_WIN32_HEAP_INIT_EXTRA
+# define SQLITE_WIN32_HEAP_INIT_EXTRA (4194304)
+#endif
+
+/*
+ * Calculate the maximum legal cache size, in pages, based on the maximum
+ * possible initial heap size and the default page size, setting aside the
+ * needed extra space.
+ */
+#ifndef SQLITE_WIN32_MAX_CACHE_SIZE
+# define SQLITE_WIN32_MAX_CACHE_SIZE (((SQLITE_WIN32_HEAP_MAX_INIT_SIZE) - \
+ (SQLITE_WIN32_HEAP_INIT_EXTRA)) / \
+ (SQLITE_DEFAULT_PAGE_SIZE))
+#endif
+
+/*
+ * This is cache size used in the calculation of the initial size of the
+ * Win32-specific heap. It cannot be negative.
+ */
+#ifndef SQLITE_WIN32_CACHE_SIZE
+# if SQLITE_DEFAULT_CACHE_SIZE>=0
+# define SQLITE_WIN32_CACHE_SIZE (SQLITE_DEFAULT_CACHE_SIZE)
+# else
+# define SQLITE_WIN32_CACHE_SIZE (-(SQLITE_DEFAULT_CACHE_SIZE))
+# endif
+#endif
+
+/*
+ * Make sure that the calculated cache size, in pages, cannot cause the
+ * initial size of the Win32-specific heap to exceed the maximum amount
+ * of memory that can be specified in the call to HeapCreate.
+ */
+#if SQLITE_WIN32_CACHE_SIZE>SQLITE_WIN32_MAX_CACHE_SIZE
+# undef SQLITE_WIN32_CACHE_SIZE
+# define SQLITE_WIN32_CACHE_SIZE (2000)
#endif
/*
* The initial size of the Win32-specific heap. This value may be zero.
*/
#ifndef SQLITE_WIN32_HEAP_INIT_SIZE
-# define SQLITE_WIN32_HEAP_INIT_SIZE ((SQLITE_DEFAULT_CACHE_SIZE) * \
- (SQLITE_DEFAULT_PAGE_SIZE) + 4194304)
+# define SQLITE_WIN32_HEAP_INIT_SIZE ((SQLITE_WIN32_CACHE_SIZE) * \
+ (SQLITE_DEFAULT_PAGE_SIZE) + \
+ (SQLITE_WIN32_HEAP_INIT_EXTRA))
#endif
/*
* The maximum size of the Win32-specific heap. This value may be zero.
*/
#ifndef SQLITE_WIN32_HEAP_MAX_SIZE
-# define SQLITE_WIN32_HEAP_MAX_SIZE (0)
+# define SQLITE_WIN32_HEAP_MAX_SIZE (0)
#endif
/*
* zero for the default behavior.
*/
#ifndef SQLITE_WIN32_HEAP_FLAGS
-# define SQLITE_WIN32_HEAP_FLAGS (0)
+# define SQLITE_WIN32_HEAP_FLAGS (0)
#endif
#define osCreateFileW ((HANDLE(WINAPI*)(LPCWSTR,DWORD,DWORD, \
LPSECURITY_ATTRIBUTES,DWORD,DWORD,HANDLE))aSyscall[5].pCurrent)
-#if (!SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_ANSI) && \
- (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0))
+#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_ANSI) && \
+ (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) && \
+ SQLITE_WIN32_CREATEFILEMAPPINGA
{ "CreateFileMappingA", (SYSCALL)CreateFileMappingA, 0 },
#else
{ "CreateFileMappingA", (SYSCALL)0, 0 },
#define osGetTickCount ((DWORD(WINAPI*)(VOID))aSyscall[33].pCurrent)
-#if defined(SQLITE_WIN32_HAS_ANSI) && defined(SQLITE_WIN32_GETVERSIONEX) && \
- SQLITE_WIN32_GETVERSIONEX
+#if defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_GETVERSIONEX
{ "GetVersionExA", (SYSCALL)GetVersionExA, 0 },
#else
{ "GetVersionExA", (SYSCALL)0, 0 },
LPOSVERSIONINFOA))aSyscall[34].pCurrent)
#if !SQLITE_OS_WINRT && defined(SQLITE_WIN32_HAS_WIDE) && \
- defined(SQLITE_WIN32_GETVERSIONEX) && SQLITE_WIN32_GETVERSIONEX
+ SQLITE_WIN32_GETVERSIONEX
{ "GetVersionExW", (SYSCALL)GetVersionExW, 0 },
#else
{ "GetVersionExW", (SYSCALL)0, 0 },
** "pnLargest" argument, if non-zero, will be used to return the size of the
** largest committed free block in the heap, in bytes.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_compact_heap(LPUINT pnLargest){
+SQLITE_API int sqlite3_win32_compact_heap(LPUINT pnLargest){
int rc = SQLITE_OK;
UINT nLargest = 0;
HANDLE hHeap;
if( lastErrno==NO_ERROR ){
sqlite3_log(SQLITE_NOMEM, "failed to HeapCompact (no space), heap=%p",
(void*)hHeap);
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
sqlite3_log(SQLITE_ERROR, "failed to HeapCompact (%lu), heap=%p",
osGetLastError(), (void*)hHeap);
** the sqlite3_memory_used() function does not return zero, SQLITE_BUSY will
** be returned and no changes will be made to the Win32 native heap.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_reset_heap(){
+SQLITE_API int sqlite3_win32_reset_heap(){
int rc;
MUTEX_LOGIC( sqlite3_mutex *pMaster; ) /* The main static mutex */
MUTEX_LOGIC( sqlite3_mutex *pMem; ) /* The memsys static mutex */
- MUTEX_LOGIC( pMaster = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_MASTER); )
- MUTEX_LOGIC( pMem = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_MEM); )
+ MUTEX_LOGIC( pMaster = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); )
+ MUTEX_LOGIC( pMem = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM); )
sqlite3_mutex_enter(pMaster);
sqlite3_mutex_enter(pMem);
winMemAssertMagic();
** (if available).
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_write_debug(const char *zBuf, int nBuf){
+SQLITE_API void sqlite3_win32_write_debug(const char *zBuf, int nBuf){
char zDbgBuf[SQLITE_WIN32_DBG_BUF_SIZE];
int nMin = MIN(nBuf, (SQLITE_WIN32_DBG_BUF_SIZE - 1)); /* may be negative. */
if( nMin<-1 ) nMin = -1; /* all negative values become -1. */
assert( nMin==-1 || nMin==0 || nMin<SQLITE_WIN32_DBG_BUF_SIZE );
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zBuf ){
+ (void)SQLITE_MISUSE_BKPT;
+ return;
+ }
+#endif
#if defined(SQLITE_WIN32_HAS_ANSI)
if( nMin>0 ){
memset(zDbgBuf, 0, SQLITE_WIN32_DBG_BUF_SIZE);
static HANDLE sleepObj = NULL;
#endif
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds){
+SQLITE_API void sqlite3_win32_sleep(DWORD milliseconds){
#if SQLITE_OS_WINRT
if ( sleepObj==NULL ){
sleepObj = osCreateEventExW(NULL, NULL, CREATE_EVENT_MANUAL_RESET,
** the LockFileEx() API.
*/
-#if !defined(SQLITE_WIN32_GETVERSIONEX) || !SQLITE_WIN32_GETVERSIONEX
+#if !SQLITE_WIN32_GETVERSIONEX
# define osIsNT() (1)
#elif SQLITE_OS_WINCE || SQLITE_OS_WINRT || !defined(SQLITE_WIN32_HAS_ANSI)
# define osIsNT() (1)
** This function determines if the machine is running a version of Windows
** based on the NT kernel.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void){
+SQLITE_API int sqlite3_win32_is_nt(void){
#if SQLITE_OS_WINRT
/*
** NOTE: The WinRT sub-platform is always assumed to be based on the NT
** kernel.
*/
return 1;
-#elif defined(SQLITE_WIN32_GETVERSIONEX) && SQLITE_WIN32_GETVERSIONEX
+#elif SQLITE_WIN32_GETVERSIONEX
if( osInterlockedCompareExchange(&sqlite3_os_type, 0, 0)==0 ){
#if defined(SQLITE_WIN32_HAS_ANSI)
OSVERSIONINFOA sInfo;
"failed to HeapCreate (%lu), flags=%u, initSize=%lu, maxSize=%lu",
osGetLastError(), SQLITE_WIN32_HEAP_FLAGS, dwInitialSize,
dwMaximumSize);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pWinMemData->bOwned = TRUE;
assert( pWinMemData->bOwned );
if( !pWinMemData->hHeap ){
sqlite3_log(SQLITE_NOMEM,
"failed to GetProcessHeap (%lu)", osGetLastError());
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pWinMemData->bOwned = FALSE;
assert( !pWinMemData->bOwned );
#endif /* SQLITE_WIN32_MALLOC */
/*
-** Convert a UTF-8 string to Microsoft Unicode (UTF-16?).
+** Convert a UTF-8 string to Microsoft Unicode.
**
-** Space to hold the returned string is obtained from malloc.
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-static LPWSTR winUtf8ToUnicode(const char *zFilename){
+static LPWSTR winUtf8ToUnicode(const char *zText){
int nChar;
- LPWSTR zWideFilename;
+ LPWSTR zWideText;
- nChar = osMultiByteToWideChar(CP_UTF8, 0, zFilename, -1, NULL, 0);
+ nChar = osMultiByteToWideChar(CP_UTF8, 0, zText, -1, NULL, 0);
if( nChar==0 ){
return 0;
}
- zWideFilename = sqlite3MallocZero( nChar*sizeof(zWideFilename[0]) );
- if( zWideFilename==0 ){
+ zWideText = sqlite3MallocZero( nChar*sizeof(WCHAR) );
+ if( zWideText==0 ){
return 0;
}
- nChar = osMultiByteToWideChar(CP_UTF8, 0, zFilename, -1, zWideFilename,
+ nChar = osMultiByteToWideChar(CP_UTF8, 0, zText, -1, zWideText,
nChar);
if( nChar==0 ){
- sqlite3_free(zWideFilename);
- zWideFilename = 0;
+ sqlite3_free(zWideText);
+ zWideText = 0;
}
- return zWideFilename;
+ return zWideText;
}
/*
-** Convert Microsoft Unicode to UTF-8. Space to hold the returned string is
-** obtained from sqlite3_malloc().
+** Convert a Microsoft Unicode string to UTF-8.
+**
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-static char *winUnicodeToUtf8(LPCWSTR zWideFilename){
+static char *winUnicodeToUtf8(LPCWSTR zWideText){
int nByte;
- char *zFilename;
+ char *zText;
- nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideFilename, -1, 0, 0, 0, 0);
+ nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideText, -1, 0, 0, 0, 0);
if( nByte == 0 ){
return 0;
}
- zFilename = sqlite3MallocZero( nByte );
- if( zFilename==0 ){
+ zText = sqlite3MallocZero( nByte );
+ if( zText==0 ){
return 0;
}
- nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideFilename, -1, zFilename, nByte,
+ nByte = osWideCharToMultiByte(CP_UTF8, 0, zWideText, -1, zText, nByte,
0, 0);
if( nByte == 0 ){
- sqlite3_free(zFilename);
- zFilename = 0;
+ sqlite3_free(zText);
+ zText = 0;
}
- return zFilename;
+ return zText;
}
/*
-** Convert an ANSI string to Microsoft Unicode, based on the
-** current codepage settings for file apis.
+** Convert an ANSI string to Microsoft Unicode, using the ANSI or OEM
+** code page.
**
-** Space to hold the returned string is obtained
-** from sqlite3_malloc.
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-static LPWSTR winMbcsToUnicode(const char *zFilename){
+static LPWSTR winMbcsToUnicode(const char *zText, int useAnsi){
int nByte;
- LPWSTR zMbcsFilename;
- int codepage = osAreFileApisANSI() ? CP_ACP : CP_OEMCP;
+ LPWSTR zMbcsText;
+ int codepage = useAnsi ? CP_ACP : CP_OEMCP;
- nByte = osMultiByteToWideChar(codepage, 0, zFilename, -1, NULL,
+ nByte = osMultiByteToWideChar(codepage, 0, zText, -1, NULL,
0)*sizeof(WCHAR);
if( nByte==0 ){
return 0;
}
- zMbcsFilename = sqlite3MallocZero( nByte*sizeof(zMbcsFilename[0]) );
- if( zMbcsFilename==0 ){
+ zMbcsText = sqlite3MallocZero( nByte*sizeof(WCHAR) );
+ if( zMbcsText==0 ){
return 0;
}
- nByte = osMultiByteToWideChar(codepage, 0, zFilename, -1, zMbcsFilename,
+ nByte = osMultiByteToWideChar(codepage, 0, zText, -1, zMbcsText,
nByte);
if( nByte==0 ){
- sqlite3_free(zMbcsFilename);
- zMbcsFilename = 0;
+ sqlite3_free(zMbcsText);
+ zMbcsText = 0;
}
- return zMbcsFilename;
+ return zMbcsText;
}
/*
-** Convert Microsoft Unicode to multi-byte character string, based on the
-** user's ANSI codepage.
+** Convert a Microsoft Unicode string to a multi-byte character string,
+** using the ANSI or OEM code page.
**
-** Space to hold the returned string is obtained from
-** sqlite3_malloc().
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-static char *winUnicodeToMbcs(LPCWSTR zWideFilename){
+static char *winUnicodeToMbcs(LPCWSTR zWideText, int useAnsi){
int nByte;
- char *zFilename;
- int codepage = osAreFileApisANSI() ? CP_ACP : CP_OEMCP;
+ char *zText;
+ int codepage = useAnsi ? CP_ACP : CP_OEMCP;
- nByte = osWideCharToMultiByte(codepage, 0, zWideFilename, -1, 0, 0, 0, 0);
+ nByte = osWideCharToMultiByte(codepage, 0, zWideText, -1, 0, 0, 0, 0);
if( nByte == 0 ){
return 0;
}
- zFilename = sqlite3MallocZero( nByte );
- if( zFilename==0 ){
+ zText = sqlite3MallocZero( nByte );
+ if( zText==0 ){
return 0;
}
- nByte = osWideCharToMultiByte(codepage, 0, zWideFilename, -1, zFilename,
+ nByte = osWideCharToMultiByte(codepage, 0, zWideText, -1, zText,
nByte, 0, 0);
if( nByte == 0 ){
- sqlite3_free(zFilename);
- zFilename = 0;
+ sqlite3_free(zText);
+ zText = 0;
}
- return zFilename;
+ return zText;
}
/*
-** Convert multibyte character string to UTF-8. Space to hold the
-** returned string is obtained from sqlite3_malloc().
+** Convert a multi-byte character string to UTF-8.
+**
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_mbcs_to_utf8(const char *zFilename){
- char *zFilenameUtf8;
+static char *winMbcsToUtf8(const char *zText, int useAnsi){
+ char *zTextUtf8;
LPWSTR zTmpWide;
- zTmpWide = winMbcsToUnicode(zFilename);
+ zTmpWide = winMbcsToUnicode(zText, useAnsi);
if( zTmpWide==0 ){
return 0;
}
- zFilenameUtf8 = winUnicodeToUtf8(zTmpWide);
+ zTextUtf8 = winUnicodeToUtf8(zTmpWide);
sqlite3_free(zTmpWide);
- return zFilenameUtf8;
+ return zTextUtf8;
}
/*
-** Convert UTF-8 to multibyte character string. Space to hold the
-** returned string is obtained from sqlite3_malloc().
+** Convert a UTF-8 string to a multi-byte character string.
+**
+** Space to hold the returned string is obtained from sqlite3_malloc().
*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_win32_utf8_to_mbcs(const char *zFilename){
- char *zFilenameMbcs;
+static char *winUtf8ToMbcs(const char *zText, int useAnsi){
+ char *zTextMbcs;
LPWSTR zTmpWide;
- zTmpWide = winUtf8ToUnicode(zFilename);
+ zTmpWide = winUtf8ToUnicode(zText);
if( zTmpWide==0 ){
return 0;
}
- zFilenameMbcs = winUnicodeToMbcs(zTmpWide);
+ zTextMbcs = winUnicodeToMbcs(zTmpWide, useAnsi);
sqlite3_free(zTmpWide);
- return zFilenameMbcs;
+ return zTextMbcs;
+}
+
+/*
+** This is a public wrapper for the winUtf8ToUnicode() function.
+*/
+SQLITE_API LPWSTR sqlite3_win32_utf8_to_unicode(const char *zText){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winUtf8ToUnicode(zText);
+}
+
+/*
+** This is a public wrapper for the winUnicodeToUtf8() function.
+*/
+SQLITE_API char *sqlite3_win32_unicode_to_utf8(LPCWSTR zWideText){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zWideText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winUnicodeToUtf8(zWideText);
+}
+
+/*
+** This is a public wrapper for the winMbcsToUtf8() function.
+*/
+SQLITE_API char *sqlite3_win32_mbcs_to_utf8(const char *zText){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winMbcsToUtf8(zText, osAreFileApisANSI());
+}
+
+/*
+** This is a public wrapper for the winMbcsToUtf8() function.
+*/
+SQLITE_API char *sqlite3_win32_mbcs_to_utf8_v2(const char *zText, int useAnsi){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winMbcsToUtf8(zText, useAnsi);
+}
+
+/*
+** This is a public wrapper for the winUtf8ToMbcs() function.
+*/
+SQLITE_API char *sqlite3_win32_utf8_to_mbcs(const char *zText){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winUtf8ToMbcs(zText, osAreFileApisANSI());
+}
+
+/*
+** This is a public wrapper for the winUtf8ToMbcs() function.
+*/
+SQLITE_API char *sqlite3_win32_utf8_to_mbcs_v2(const char *zText, int useAnsi){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !zText ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+#ifndef SQLITE_OMIT_AUTOINIT
+ if( sqlite3_initialize() ) return 0;
+#endif
+ return winUtf8ToMbcs(zText, useAnsi);
}
/*
** argument is the name of the directory to use. The return value will be
** SQLITE_OK if successful.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){
+SQLITE_API int sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){
char **ppDirectory = 0;
#ifndef SQLITE_OMIT_AUTOINIT
int rc = sqlite3_initialize();
if( zValue && zValue[0] ){
zValueUtf8 = winUnicodeToUtf8(zValue);
if ( zValueUtf8==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
}
sqlite3_free(*ppDirectory);
if( dwLen > 0 ){
/* allocate a buffer and convert to UTF8 */
sqlite3BeginBenignMalloc();
- zOut = sqlite3_win32_mbcs_to_utf8(zTemp);
+ zOut = winMbcsToUtf8(zTemp, osAreFileApisANSI());
sqlite3EndBenignMalloc();
/* free the system buffer allocated by FormatMessage */
osLocalFree(zTemp);
}
}
-#if SQLITE_OS_WINCE
-/*************************************************************************
-** This section contains code for WinCE only.
+/*
+** This #if does not rely on the SQLITE_OS_WINCE define because the
+** corresponding section in "date.c" cannot use it.
*/
-#if !defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API
+#if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
+ (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
/*
-** The MSVC CRT on Windows CE may not have a localtime() function. So
-** create a substitute.
+** The MSVC CRT on Windows CE may not have a localtime() function.
+** So define a substitute.
*/
-/* #include <time.h> */
+/* # include <time.h> */
struct tm *__cdecl localtime(const time_t *t)
{
static struct tm y;
}
#endif
+#if SQLITE_OS_WINCE
+/*************************************************************************
+** This section contains code for WinCE only.
+*/
#define HANDLE_TO_WINFILE(a) (winFile*)&((char*)a)[-(int)offsetof(winFile,h)]
/*
zName = winUtf8ToUnicode(zFilename);
if( zName==0 ){
/* out of memory */
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
/* Initialize the local lockdata */
}while( rc==0 && ++cnt < MX_CLOSE_ATTEMPT && (sqlite3_win32_sleep(100), 1) );
#if SQLITE_OS_WINCE
#define WINCE_DELETION_ATTEMPTS 3
- winceDestroyLock(pFile);
+ {
+ winVfsAppData *pAppData = (winVfsAppData*)pFile->pVfs->pAppData;
+ if( pAppData==NULL || !pAppData->bNoLock ){
+ winceDestroyLock(pFile);
+ }
+ }
if( pFile->zDeleteOnClose ){
int cnt = 0;
while(
"offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
pFile->h, pBuf, amt, offset, pFile->locktype));
-#if SQLITE_MAX_MMAP_SIZE>0
+#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
/* Deal with as much of this write request as possible by transfering
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
** the PENDING_LOCK byte is temporary.
*/
newLocktype = pFile->locktype;
- if( (pFile->locktype==NO_LOCK)
- || ( (locktype==EXCLUSIVE_LOCK)
- && (pFile->locktype==RESERVED_LOCK))
+ if( pFile->locktype==NO_LOCK
+ || (locktype==EXCLUSIVE_LOCK && pFile->locktype<=RESERVED_LOCK)
){
int cnt = 3;
while( cnt-->0 && (res = winLockFile(&pFile->h, SQLITE_LOCKFILE_FLAGS,
res = 1;
OSTRACE(("TEST-WR-LOCK file=%p, result=%d (local)\n", pFile->h, res));
}else{
- res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE, 0, 1, 0);
+ res = winLockFile(&pFile->h, SQLITE_LOCKFILEEX_FLAGS,RESERVED_BYTE,0,1,0);
if( res ){
winUnlockFile(&pFile->h, RESERVED_BYTE, 0, 1, 0);
}
return rc;
}
+/******************************************************************************
+****************************** No-op Locking **********************************
+**
+** Of the various locking implementations available, this is by far the
+** simplest: locking is ignored. No attempt is made to lock the database
+** file for reading or writing.
+**
+** This locking mode is appropriate for use on read-only databases
+** (ex: databases that are burned into CD-ROM, for example.) It can
+** also be used if the application employs some external mechanism to
+** prevent simultaneous access of the same database by two or more
+** database connections. But there is a serious risk of database
+** corruption if this locking mode is used in situations where multiple
+** database connections are accessing the same database file at the same
+** time and one or more of those connections are writing.
+*/
+
+static int winNolockLock(sqlite3_file *id, int locktype){
+ UNUSED_PARAMETER(id);
+ UNUSED_PARAMETER(locktype);
+ return SQLITE_OK;
+}
+
+static int winNolockCheckReservedLock(sqlite3_file *id, int *pResOut){
+ UNUSED_PARAMETER(id);
+ UNUSED_PARAMETER(pResOut);
+ return SQLITE_OK;
+}
+
+static int winNolockUnlock(sqlite3_file *id, int locktype){
+ UNUSED_PARAMETER(id);
+ UNUSED_PARAMETER(locktype);
+ return SQLITE_OK;
+}
+
+/******************* End of the no-op lock implementation *********************
+******************************************************************************/
+
/*
** If *pArg is initially negative then this is a query. Set *pArg to
** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
return SQLITE_OK;
}
- case SQLITE_LAST_ERRNO: {
+ case SQLITE_FCNTL_LAST_ERRNO: {
*(int*)pArg = (int)pFile->lastErrno;
OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
return SQLITE_OK;
OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
return SQLITE_OK;
}
+ case SQLITE_FCNTL_WIN32_GET_HANDLE: {
+ LPHANDLE phFile = (LPHANDLE)pArg;
+ *phFile = pFile->h;
+ OSTRACE(("FCNTL file=%p, rc=SQLITE_OK\n", pFile->h));
+ return SQLITE_OK;
+ }
#ifdef SQLITE_TEST
case SQLITE_FCNTL_WIN32_SET_HANDLE: {
LPHANDLE phFile = (LPHANDLE)pArg;
if( newLimit>sqlite3GlobalConfig.mxMmap ){
newLimit = sqlite3GlobalConfig.mxMmap;
}
+
+ /* The value of newLimit may be eventually cast to (SIZE_T) and passed
+ ** to MapViewOfFile(). Restrict its value to 2GB if (SIZE_T) is not at
+ ** least a 64-bit type. */
+ if( newLimit>0 && sizeof(SIZE_T)<8 ){
+ newLimit = (newLimit & 0x7FFFFFFF);
+ }
+
*(i64*)pArg = pFile->mmapSizeMax;
if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){
pFile->mmapSizeMax = newLimit;
** assert( winShmMutexHeld() );
** winShmLeaveMutex()
*/
+static sqlite3_mutex *winBigLock = 0;
static void winShmEnterMutex(void){
- sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ sqlite3_mutex_enter(winBigLock);
}
static void winShmLeaveMutex(void){
- sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ sqlite3_mutex_leave(winBigLock);
}
#ifndef NDEBUG
static int winShmMutexHeld(void) {
- return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
+ return sqlite3_mutex_held(winBigLock);
}
#endif
int szRegion; /* Size of shared-memory regions */
int nRegion; /* Size of array apRegion */
+ u8 isReadonly; /* True if read-only */
+ u8 isUnlocked; /* True if no DMS lock held */
+
struct ShmRegion {
HANDLE hMap; /* File handle from CreateFileMapping */
void *pMap;
/*
** Apply advisory locks for all n bytes beginning at ofst.
*/
-#define _SHM_UNLCK 1
-#define _SHM_RDLCK 2
-#define _SHM_WRLCK 3
+#define WINSHM_UNLCK 1
+#define WINSHM_RDLCK 2
+#define WINSHM_WRLCK 3
static int winShmSystemLock(
winShmNode *pFile, /* Apply locks to this open shared-memory segment */
- int lockType, /* _SHM_UNLCK, _SHM_RDLCK, or _SHM_WRLCK */
+ int lockType, /* WINSHM_UNLCK, WINSHM_RDLCK, or WINSHM_WRLCK */
int ofst, /* Offset to first byte to be locked/unlocked */
int nByte /* Number of bytes to lock or unlock */
){
int rc = 0; /* Result code form Lock/UnlockFileEx() */
/* Access to the winShmNode object is serialized by the caller */
- assert( sqlite3_mutex_held(pFile->mutex) || pFile->nRef==0 );
+ assert( pFile->nRef==0 || sqlite3_mutex_held(pFile->mutex) );
OSTRACE(("SHM-LOCK file=%p, lock=%d, offset=%d, size=%d\n",
pFile->hFile.h, lockType, ofst, nByte));
/* Release/Acquire the system-level lock */
- if( lockType==_SHM_UNLCK ){
+ if( lockType==WINSHM_UNLCK ){
rc = winUnlockFile(&pFile->hFile.h, ofst, 0, nByte, 0);
}else{
/* Initialize the locking parameters */
DWORD dwFlags = LOCKFILE_FAIL_IMMEDIATELY;
- if( lockType == _SHM_WRLCK ) dwFlags |= LOCKFILE_EXCLUSIVE_LOCK;
+ if( lockType == WINSHM_WRLCK ) dwFlags |= LOCKFILE_EXCLUSIVE_LOCK;
rc = winLockFile(&pFile->hFile.h, dwFlags, ofst, 0, nByte, 0);
}
}
OSTRACE(("SHM-LOCK file=%p, func=%s, errno=%lu, rc=%s\n",
- pFile->hFile.h, (lockType == _SHM_UNLCK) ? "winUnlockFile" :
+ pFile->hFile.h, (lockType == WINSHM_UNLCK) ? "winUnlockFile" :
"winLockFile", pFile->lastErrno, sqlite3ErrName(rc)));
return rc;
}
}
+/*
+** The DMS lock has not yet been taken on shm file pShmNode. Attempt to
+** take it now. Return SQLITE_OK if successful, or an SQLite error
+** code otherwise.
+**
+** If the DMS cannot be locked because this is a readonly_shm=1
+** connection and no other process already holds a lock, return
+** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1.
+*/
+static int winLockSharedMemory(winShmNode *pShmNode){
+ int rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1);
+
+ if( rc==SQLITE_OK ){
+ if( pShmNode->isReadonly ){
+ pShmNode->isUnlocked = 1;
+ winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
+ return SQLITE_READONLY_CANTINIT;
+ }else if( winTruncate((sqlite3_file*)&pShmNode->hFile, 0) ){
+ winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
+ return winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(),
+ "winLockSharedMemory", pShmNode->zFilename);
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
+ }
+
+ return winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1);
+}
+
/*
** Open the shared-memory area associated with database file pDbFd.
**
*/
static int winOpenSharedMemory(winFile *pDbFd){
struct winShm *p; /* The connection to be opened */
- struct winShmNode *pShmNode = 0; /* The underlying mmapped file */
- int rc; /* Result code */
- struct winShmNode *pNew; /* Newly allocated winShmNode */
+ winShmNode *pShmNode = 0; /* The underlying mmapped file */
+ int rc = SQLITE_OK; /* Result code */
+ winShmNode *pNew; /* Newly allocated winShmNode */
int nName; /* Size of zName in bytes */
assert( pDbFd->pShm==0 ); /* Not previously opened */
** allocate space for a new winShmNode and filename.
*/
p = sqlite3MallocZero( sizeof(*p) );
- if( p==0 ) return SQLITE_IOERR_NOMEM;
+ if( p==0 ) return SQLITE_IOERR_NOMEM_BKPT;
nName = sqlite3Strlen30(pDbFd->zPath);
pNew = sqlite3MallocZero( sizeof(*pShmNode) + nName + 17 );
if( pNew==0 ){
sqlite3_free(p);
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
pNew->zFilename = (char*)&pNew[1];
sqlite3_snprintf(nName+15, pNew->zFilename, "%s-shm", pDbFd->zPath);
if( pShmNode ){
sqlite3_free(pNew);
}else{
+ int inFlags = SQLITE_OPEN_WAL;
+ int outFlags = 0;
+
pShmNode = pNew;
pNew = 0;
((winFile*)(&pShmNode->hFile))->h = INVALID_HANDLE_VALUE;
pShmNode->pNext = winShmNodeList;
winShmNodeList = pShmNode;
- pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
- if( pShmNode->mutex==0 ){
- rc = SQLITE_IOERR_NOMEM;
- goto shm_open_err;
+ if( sqlite3GlobalConfig.bCoreMutex ){
+ pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
+ if( pShmNode->mutex==0 ){
+ rc = SQLITE_IOERR_NOMEM_BKPT;
+ goto shm_open_err;
+ }
}
- rc = winOpen(pDbFd->pVfs,
- pShmNode->zFilename, /* Name of the file (UTF-8) */
- (sqlite3_file*)&pShmNode->hFile, /* File handle here */
- SQLITE_OPEN_WAL | SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE,
- 0);
- if( SQLITE_OK!=rc ){
+ if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
+ inFlags |= SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE;
+ }else{
+ inFlags |= SQLITE_OPEN_READONLY;
+ }
+ rc = winOpen(pDbFd->pVfs, pShmNode->zFilename,
+ (sqlite3_file*)&pShmNode->hFile,
+ inFlags, &outFlags);
+ if( rc!=SQLITE_OK ){
+ rc = winLogError(rc, osGetLastError(), "winOpenShm",
+ pShmNode->zFilename);
goto shm_open_err;
}
+ if( outFlags==SQLITE_OPEN_READONLY ) pShmNode->isReadonly = 1;
- /* Check to see if another process is holding the dead-man switch.
- ** If not, truncate the file to zero length.
- */
- if( winShmSystemLock(pShmNode, _SHM_WRLCK, WIN_SHM_DMS, 1)==SQLITE_OK ){
- rc = winTruncate((sqlite3_file *)&pShmNode->hFile, 0);
- if( rc!=SQLITE_OK ){
- rc = winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(),
- "winOpenShm", pDbFd->zPath);
- }
- }
- if( rc==SQLITE_OK ){
- winShmSystemLock(pShmNode, _SHM_UNLCK, WIN_SHM_DMS, 1);
- rc = winShmSystemLock(pShmNode, _SHM_RDLCK, WIN_SHM_DMS, 1);
- }
- if( rc ) goto shm_open_err;
+ rc = winLockSharedMemory(pShmNode);
+ if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err;
}
/* Make the new connection a child of the winShmNode */
p->pNext = pShmNode->pFirst;
pShmNode->pFirst = p;
sqlite3_mutex_leave(pShmNode->mutex);
- return SQLITE_OK;
+ return rc;
/* Jump here on any error */
shm_open_err:
- winShmSystemLock(pShmNode, _SHM_UNLCK, WIN_SHM_DMS, 1);
+ winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1);
winShmPurge(pDbFd->pVfs, 0); /* This call frees pShmNode if required */
sqlite3_free(p);
sqlite3_free(pNew);
/* Unlock the system-level locks */
if( (mask & allMask)==0 ){
- rc = winShmSystemLock(pShmNode, _SHM_UNLCK, ofst+WIN_SHM_BASE, n);
+ rc = winShmSystemLock(pShmNode, WINSHM_UNLCK, ofst+WIN_SHM_BASE, n);
}else{
rc = SQLITE_OK;
}
/* Get shared locks at the system level, if necessary */
if( rc==SQLITE_OK ){
if( (allShared & mask)==0 ){
- rc = winShmSystemLock(pShmNode, _SHM_RDLCK, ofst+WIN_SHM_BASE, n);
+ rc = winShmSystemLock(pShmNode, WINSHM_RDLCK, ofst+WIN_SHM_BASE, n);
}else{
rc = SQLITE_OK;
}
** also mark the local connection as being locked.
*/
if( rc==SQLITE_OK ){
- rc = winShmSystemLock(pShmNode, _SHM_WRLCK, ofst+WIN_SHM_BASE, n);
+ rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, ofst+WIN_SHM_BASE, n);
if( rc==SQLITE_OK ){
assert( (p->sharedMask & mask)==0 );
p->exclMask |= mask;
winFile *pDbFd = (winFile*)fd;
winShm *pShm = pDbFd->pShm;
winShmNode *pShmNode;
+ DWORD protect = PAGE_READWRITE;
+ DWORD flags = FILE_MAP_WRITE | FILE_MAP_READ;
int rc = SQLITE_OK;
if( !pShm ){
pShmNode = pShm->pShmNode;
sqlite3_mutex_enter(pShmNode->mutex);
+ if( pShmNode->isUnlocked ){
+ rc = winLockSharedMemory(pShmNode);
+ if( rc!=SQLITE_OK ) goto shmpage_out;
+ pShmNode->isUnlocked = 0;
+ }
assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 );
if( pShmNode->nRegion<=iRegion ){
pShmNode->aRegion, (iRegion+1)*sizeof(apNew[0])
);
if( !apNew ){
- rc = SQLITE_IOERR_NOMEM;
+ rc = SQLITE_IOERR_NOMEM_BKPT;
goto shmpage_out;
}
pShmNode->aRegion = apNew;
+ if( pShmNode->isReadonly ){
+ protect = PAGE_READONLY;
+ flags = FILE_MAP_READ;
+ }
+
while( pShmNode->nRegion<=iRegion ){
HANDLE hMap = NULL; /* file-mapping handle */
void *pMap = 0; /* Mapped memory region */
#if SQLITE_OS_WINRT
hMap = osCreateFileMappingFromApp(pShmNode->hFile.h,
- NULL, PAGE_READWRITE, nByte, NULL
+ NULL, protect, nByte, NULL
);
#elif defined(SQLITE_WIN32_HAS_WIDE)
hMap = osCreateFileMappingW(pShmNode->hFile.h,
- NULL, PAGE_READWRITE, 0, nByte, NULL
+ NULL, protect, 0, nByte, NULL
);
-#elif defined(SQLITE_WIN32_HAS_ANSI)
+#elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
hMap = osCreateFileMappingA(pShmNode->hFile.h,
- NULL, PAGE_READWRITE, 0, nByte, NULL
+ NULL, protect, 0, nByte, NULL
);
#endif
OSTRACE(("SHM-MAP-CREATE pid=%lu, region=%d, size=%d, rc=%s\n",
int iOffset = pShmNode->nRegion*szRegion;
int iOffsetShift = iOffset % winSysInfo.dwAllocationGranularity;
#if SQLITE_OS_WINRT
- pMap = osMapViewOfFileFromApp(hMap, FILE_MAP_WRITE | FILE_MAP_READ,
+ pMap = osMapViewOfFileFromApp(hMap, flags,
iOffset - iOffsetShift, szRegion + iOffsetShift
);
#else
- pMap = osMapViewOfFile(hMap, FILE_MAP_WRITE | FILE_MAP_READ,
+ pMap = osMapViewOfFile(hMap, flags,
0, iOffset - iOffsetShift, szRegion + iOffsetShift
);
#endif
}else{
*pp = 0;
}
+ if( pShmNode->isReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY;
sqlite3_mutex_leave(pShmNode->mutex);
return rc;
}
DWORD flags = FILE_MAP_READ;
winUnmapfile(pFd);
+#ifdef SQLITE_MMAP_READWRITE
if( (pFd->ctrlFlags & WINFILE_RDONLY)==0 ){
protect = PAGE_READWRITE;
flags |= FILE_MAP_WRITE;
}
+#endif
#if SQLITE_OS_WINRT
pFd->hMap = osCreateFileMappingFromApp(pFd->h, NULL, protect, nMap, NULL);
#elif defined(SQLITE_WIN32_HAS_WIDE)
pFd->hMap = osCreateFileMappingW(pFd->h, NULL, protect,
(DWORD)((nMap>>32) & 0xffffffff),
(DWORD)(nMap & 0xffffffff), NULL);
-#elif defined(SQLITE_WIN32_HAS_ANSI)
+#elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA
pFd->hMap = osCreateFileMappingA(pFd->h, NULL, protect,
(DWORD)((nMap>>32) & 0xffffffff),
(DWORD)(nMap & 0xffffffff), NULL);
winUnfetch /* xUnfetch */
};
+/*
+** This vector defines all the methods that can operate on an
+** sqlite3_file for win32 without performing any locking.
+*/
+static const sqlite3_io_methods winIoNolockMethod = {
+ 3, /* iVersion */
+ winClose, /* xClose */
+ winRead, /* xRead */
+ winWrite, /* xWrite */
+ winTruncate, /* xTruncate */
+ winSync, /* xSync */
+ winFileSize, /* xFileSize */
+ winNolockLock, /* xLock */
+ winNolockUnlock, /* xUnlock */
+ winNolockCheckReservedLock, /* xCheckReservedLock */
+ winFileControl, /* xFileControl */
+ winSectorSize, /* xSectorSize */
+ winDeviceCharacteristics, /* xDeviceCharacteristics */
+ winShmMap, /* xShmMap */
+ winShmLock, /* xShmLock */
+ winShmBarrier, /* xShmBarrier */
+ winShmUnmap, /* xShmUnmap */
+ winFetch, /* xFetch */
+ winUnfetch /* xUnfetch */
+};
+
+static winVfsAppData winAppData = {
+ &winIoMethod, /* pMethod */
+ 0, /* pAppData */
+ 0 /* bNoLock */
+};
+
+static winVfsAppData winNolockAppData = {
+ &winIoNolockMethod, /* pMethod */
+ 0, /* pAppData */
+ 1 /* bNoLock */
+};
+
/****************************************************************************
**************************** sqlite3_vfs methods ****************************
**
}
#ifdef SQLITE_WIN32_HAS_ANSI
else{
- zConverted = sqlite3_win32_mbcs_to_utf8(zFilename);
+ zConverted = winMbcsToUtf8(zFilename, osAreFileApisANSI());
}
#endif
/* caller will handle out of memory */
}
#ifdef SQLITE_WIN32_HAS_ANSI
else{
- zConverted = sqlite3_win32_utf8_to_mbcs(zFilename);
+ zConverted = winUtf8ToMbcs(zFilename, osAreFileApisANSI());
}
#endif
/* caller will handle out of memory */
zBuf = sqlite3MallocZero( nBuf );
if( !zBuf ){
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
/* Figure out the effective temporary directory. First, check if one
if( !zConverted ){
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( winIsDir(zConverted) ){
sqlite3_snprintf(nMax, zBuf, "%s", zDir);
if( !zConverted ){
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( cygwin_conv_path(
osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A, zDir,
sqlite3_free(zConverted);
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
sqlite3_snprintf(nMax, zBuf, "%s", zUtf8);
sqlite3_free(zUtf8);
if( !zWidePath ){
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( osGetTempPathW(nMax, zWidePath)==0 ){
sqlite3_free(zWidePath);
sqlite3_free(zWidePath);
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
}
#ifdef SQLITE_WIN32_HAS_ANSI
if( !zMbcsPath ){
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( osGetTempPathA(nMax, zMbcsPath)==0 ){
sqlite3_free(zBuf);
return winLogError(SQLITE_IOERR_GETTEMPPATH, osGetLastError(),
"winGetTempname3", 0);
}
- zUtf8 = sqlite3_win32_mbcs_to_utf8(zMbcsPath);
+ zUtf8 = winMbcsToUtf8(zMbcsPath, osAreFileApisANSI());
if( zUtf8 ){
sqlite3_snprintf(nMax, zBuf, "%s", zUtf8);
sqlite3_free(zUtf8);
}else{
sqlite3_free(zBuf);
OSTRACE(("TEMP-FILENAME rc=SQLITE_IOERR_NOMEM\n"));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
}
#endif /* SQLITE_WIN32_HAS_ANSI */
return (attr!=INVALID_FILE_ATTRIBUTES) && (attr&FILE_ATTRIBUTE_DIRECTORY);
}
+/* forward reference */
+static int winAccess(
+ sqlite3_vfs *pVfs, /* Not used on win32 */
+ const char *zFilename, /* Name of file to check */
+ int flags, /* Type of test to make on this file */
+ int *pResOut /* OUT: Result */
+);
+
/*
** Open a file.
*/
static int winOpen(
- sqlite3_vfs *pVfs, /* Used to get maximum path name length */
+ sqlite3_vfs *pVfs, /* Used to get maximum path length and AppData */
const char *zName, /* Name of the file (UTF-8) */
sqlite3_file *id, /* Write the SQLite file handle here */
int flags, /* Open mode flags */
#if SQLITE_OS_WINCE
int isTemp = 0;
#endif
+ winVfsAppData *pAppData;
winFile *pFile = (winFile*)id;
void *zConverted; /* Filename in OS encoding */
const char *zUtf8Name = zName; /* Filename in UTF-8 encoding */
if( zConverted==0 ){
sqlite3_free(zTmpname);
OSTRACE(("OPEN name=%s, rc=SQLITE_IOERR_NOMEM", zUtf8Name));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( winIsDir(zConverted) ){
extendedParameters.dwSecurityQosFlags = SECURITY_ANONYMOUS;
extendedParameters.lpSecurityAttributes = NULL;
extendedParameters.hTemplateFile = NULL;
- while( (h = osCreateFile2((LPCWSTR)zConverted,
- dwDesiredAccess,
- dwShareMode,
- dwCreationDisposition,
- &extendedParameters))==INVALID_HANDLE_VALUE &&
- winRetryIoerr(&cnt, &lastErrno) ){
- /* Noop */
- }
+ do{
+ h = osCreateFile2((LPCWSTR)zConverted,
+ dwDesiredAccess,
+ dwShareMode,
+ dwCreationDisposition,
+ &extendedParameters);
+ if( h!=INVALID_HANDLE_VALUE ) break;
+ if( isReadWrite ){
+ int rc2, isRO = 0;
+ sqlite3BeginBenignMalloc();
+ rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO);
+ sqlite3EndBenignMalloc();
+ if( rc2==SQLITE_OK && isRO ) break;
+ }
+ }while( winRetryIoerr(&cnt, &lastErrno) );
#else
- while( (h = osCreateFileW((LPCWSTR)zConverted,
- dwDesiredAccess,
- dwShareMode, NULL,
- dwCreationDisposition,
- dwFlagsAndAttributes,
- NULL))==INVALID_HANDLE_VALUE &&
- winRetryIoerr(&cnt, &lastErrno) ){
- /* Noop */
- }
+ do{
+ h = osCreateFileW((LPCWSTR)zConverted,
+ dwDesiredAccess,
+ dwShareMode, NULL,
+ dwCreationDisposition,
+ dwFlagsAndAttributes,
+ NULL);
+ if( h!=INVALID_HANDLE_VALUE ) break;
+ if( isReadWrite ){
+ int rc2, isRO = 0;
+ sqlite3BeginBenignMalloc();
+ rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO);
+ sqlite3EndBenignMalloc();
+ if( rc2==SQLITE_OK && isRO ) break;
+ }
+ }while( winRetryIoerr(&cnt, &lastErrno) );
#endif
}
#ifdef SQLITE_WIN32_HAS_ANSI
else{
- while( (h = osCreateFileA((LPCSTR)zConverted,
- dwDesiredAccess,
- dwShareMode, NULL,
- dwCreationDisposition,
- dwFlagsAndAttributes,
- NULL))==INVALID_HANDLE_VALUE &&
- winRetryIoerr(&cnt, &lastErrno) ){
- /* Noop */
- }
+ do{
+ h = osCreateFileA((LPCSTR)zConverted,
+ dwDesiredAccess,
+ dwShareMode, NULL,
+ dwCreationDisposition,
+ dwFlagsAndAttributes,
+ NULL);
+ if( h!=INVALID_HANDLE_VALUE ) break;
+ if( isReadWrite ){
+ int rc2, isRO = 0;
+ sqlite3BeginBenignMalloc();
+ rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO);
+ sqlite3EndBenignMalloc();
+ if( rc2==SQLITE_OK && isRO ) break;
+ }
+ }while( winRetryIoerr(&cnt, &lastErrno) );
}
#endif
winLogIoerr(cnt, __LINE__);
dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));
if( h==INVALID_HANDLE_VALUE ){
- pFile->lastErrno = lastErrno;
- winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name);
sqlite3_free(zConverted);
sqlite3_free(zTmpname);
if( isReadWrite && !isExclusive ){
~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)),
pOutFlags);
}else{
+ pFile->lastErrno = lastErrno;
+ winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name);
return SQLITE_CANTOPEN_BKPT;
}
}
"rc=%s\n", h, zUtf8Name, dwDesiredAccess, pOutFlags, pOutFlags ?
*pOutFlags : 0, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok"));
+ pAppData = (winVfsAppData*)pVfs->pAppData;
+
#if SQLITE_OS_WINCE
- if( isReadWrite && eType==SQLITE_OPEN_MAIN_DB
- && (rc = winceCreateLock(zName, pFile))!=SQLITE_OK
- ){
- osCloseHandle(h);
- sqlite3_free(zConverted);
- sqlite3_free(zTmpname);
- OSTRACE(("OPEN-CE-LOCK name=%s, rc=%s\n", zName, sqlite3ErrName(rc)));
- return rc;
+ {
+ if( isReadWrite && eType==SQLITE_OPEN_MAIN_DB
+ && ((pAppData==NULL) || !pAppData->bNoLock)
+ && (rc = winceCreateLock(zName, pFile))!=SQLITE_OK
+ ){
+ osCloseHandle(h);
+ sqlite3_free(zConverted);
+ sqlite3_free(zTmpname);
+ OSTRACE(("OPEN-CE-LOCK name=%s, rc=%s\n", zName, sqlite3ErrName(rc)));
+ return rc;
+ }
}
if( isTemp ){
pFile->zDeleteOnClose = zConverted;
}
sqlite3_free(zTmpname);
- pFile->pMethod = &winIoMethod;
+ pFile->pMethod = pAppData ? pAppData->pMethod : &winIoMethod;
pFile->pVfs = pVfs;
pFile->h = h;
if( isReadonly ){
zConverted = winConvertFromUtf8Filename(zFilename);
if( zConverted==0 ){
OSTRACE(("DELETE name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( osIsNT() ){
do {
zConverted = winConvertFromUtf8Filename(zFilename);
if( zConverted==0 ){
OSTRACE(("ACCESS name=%s, rc=SQLITE_IOERR_NOMEM\n", zFilename));
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( osIsNT() ){
int cnt = 0;
int nFull, /* Size of output buffer in bytes */
char *zFull /* Output buffer */
){
+#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
+ DWORD nByte;
+ void *zConverted;
+ char *zOut;
+#endif
+
+ /* If this path name begins with "/X:", where "X" is any alphabetic
+ ** character, discard the initial "/" from the pathname.
+ */
+ if( zRelative[0]=='/' && winIsDriveLetterAndColon(zRelative+1) ){
+ zRelative++;
+ }
#if defined(__CYGWIN__)
SimulateIOError( return SQLITE_ERROR );
*/
char *zOut = sqlite3MallocZero( pVfs->mxPathname+1 );
if( !zOut ){
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( cygwin_conv_path(
(osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A) |
char *zUtf8 = winConvertToUtf8Filename(zOut);
if( !zUtf8 ){
sqlite3_free(zOut);
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s%c%s",
sqlite3_data_directory, winGetDirSep(), zUtf8);
}else{
char *zOut = sqlite3MallocZero( pVfs->mxPathname+1 );
if( !zOut ){
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( cygwin_conv_path(
(osIsNT() ? CCP_POSIX_TO_WIN_W : CCP_POSIX_TO_WIN_A),
char *zUtf8 = winConvertToUtf8Filename(zOut);
if( !zUtf8 ){
sqlite3_free(zOut);
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
sqlite3_snprintf(MIN(nFull, pVfs->mxPathname), zFull, "%s", zUtf8);
sqlite3_free(zUtf8);
#endif
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && !defined(__CYGWIN__)
- DWORD nByte;
- void *zConverted;
- char *zOut;
-
- /* If this path name begins with "/X:", where "X" is any alphabetic
- ** character, discard the initial "/" from the pathname.
- */
- if( zRelative[0]=='/' && winIsDriveLetterAndColon(zRelative+1) ){
- zRelative++;
- }
-
/* It's odd to simulate an io-error here, but really this is just
** using the io-error infrastructure to test that SQLite handles this
** function failing. This function could fail if, for example, the
}
zConverted = winConvertFromUtf8Filename(zRelative);
if( zConverted==0 ){
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
if( osIsNT() ){
LPWSTR zTemp;
zTemp = sqlite3MallocZero( nByte*sizeof(zTemp[0]) );
if( zTemp==0 ){
sqlite3_free(zConverted);
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
nByte = osGetFullPathNameW((LPCWSTR)zConverted, nByte, zTemp, 0);
if( nByte==0 ){
zTemp = sqlite3MallocZero( nByte*sizeof(zTemp[0]) );
if( zTemp==0 ){
sqlite3_free(zConverted);
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
nByte = osGetFullPathNameA((char*)zConverted, nByte, zTemp, 0);
if( nByte==0 ){
"winFullPathname4", zRelative);
}
sqlite3_free(zConverted);
- zOut = sqlite3_win32_mbcs_to_utf8(zTemp);
+ zOut = winMbcsToUtf8(zTemp, osAreFileApisANSI());
sqlite3_free(zTemp);
}
#endif
sqlite3_free(zOut);
return SQLITE_OK;
}else{
- return SQLITE_IOERR_NOMEM;
+ return SQLITE_IOERR_NOMEM_BKPT;
}
#endif
}
#define winDlClose 0
#endif
+/* State information for the randomness gatherer. */
+typedef struct EntropyGatherer EntropyGatherer;
+struct EntropyGatherer {
+ unsigned char *a; /* Gather entropy into this buffer */
+ int na; /* Size of a[] in bytes */
+ int i; /* XOR next input into a[i] */
+ int nXor; /* Number of XOR operations done */
+};
+
+#if !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS)
+/* Mix sz bytes of entropy into p. */
+static void xorMemory(EntropyGatherer *p, unsigned char *x, int sz){
+ int j, k;
+ for(j=0, k=p->i; j<sz; j++){
+ p->a[k++] ^= x[j];
+ if( k>=p->na ) k = 0;
+ }
+ p->i = k;
+ p->nXor += sz;
+}
+#endif /* !defined(SQLITE_TEST) && !defined(SQLITE_OMIT_RANDOMNESS) */
/*
** Write up to nBuf bytes of randomness into zBuf.
*/
static int winRandomness(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
- int n = 0;
- UNUSED_PARAMETER(pVfs);
#if defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS)
- n = nBuf;
+ UNUSED_PARAMETER(pVfs);
memset(zBuf, 0, nBuf);
+ return nBuf;
#else
- if( sizeof(SYSTEMTIME)<=nBuf-n ){
+ EntropyGatherer e;
+ UNUSED_PARAMETER(pVfs);
+ memset(zBuf, 0, nBuf);
+ e.a = (unsigned char*)zBuf;
+ e.na = nBuf;
+ e.nXor = 0;
+ e.i = 0;
+ {
SYSTEMTIME x;
osGetSystemTime(&x);
- memcpy(&zBuf[n], &x, sizeof(x));
- n += sizeof(x);
+ xorMemory(&e, (unsigned char*)&x, sizeof(SYSTEMTIME));
}
- if( sizeof(DWORD)<=nBuf-n ){
+ {
DWORD pid = osGetCurrentProcessId();
- memcpy(&zBuf[n], &pid, sizeof(pid));
- n += sizeof(pid);
+ xorMemory(&e, (unsigned char*)&pid, sizeof(DWORD));
}
#if SQLITE_OS_WINRT
- if( sizeof(ULONGLONG)<=nBuf-n ){
+ {
ULONGLONG cnt = osGetTickCount64();
- memcpy(&zBuf[n], &cnt, sizeof(cnt));
- n += sizeof(cnt);
+ xorMemory(&e, (unsigned char*)&cnt, sizeof(ULONGLONG));
}
#else
- if( sizeof(DWORD)<=nBuf-n ){
+ {
DWORD cnt = osGetTickCount();
- memcpy(&zBuf[n], &cnt, sizeof(cnt));
- n += sizeof(cnt);
+ xorMemory(&e, (unsigned char*)&cnt, sizeof(DWORD));
}
-#endif
- if( sizeof(LARGE_INTEGER)<=nBuf-n ){
+#endif /* SQLITE_OS_WINRT */
+ {
LARGE_INTEGER i;
osQueryPerformanceCounter(&i);
- memcpy(&zBuf[n], &i, sizeof(i));
- n += sizeof(i);
+ xorMemory(&e, (unsigned char*)&i, sizeof(LARGE_INTEGER));
}
#if !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID
- if( sizeof(UUID)<=nBuf-n ){
+ {
UUID id;
memset(&id, 0, sizeof(UUID));
osUuidCreate(&id);
- memcpy(&zBuf[n], &id, sizeof(UUID));
- n += sizeof(UUID);
- }
- if( sizeof(UUID)<=nBuf-n ){
- UUID id;
+ xorMemory(&e, (unsigned char*)&id, sizeof(UUID));
memset(&id, 0, sizeof(UUID));
osUuidCreateSequential(&id);
- memcpy(&zBuf[n], &id, sizeof(UUID));
- n += sizeof(UUID);
+ xorMemory(&e, (unsigned char*)&id, sizeof(UUID));
}
-#endif
-#endif /* defined(SQLITE_TEST) || defined(SQLITE_ZERO_PRNG_SEED) */
- return n;
+#endif /* !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && SQLITE_WIN32_USE_UUID */
+ return e.nXor>nBuf ? nBuf : e.nXor;
+#endif /* defined(SQLITE_TEST) || defined(SQLITE_OMIT_RANDOMNESS) */
}
** sqlite3_errmsg(), possibly making IO errors easier to debug.
*/
static int winGetLastError(sqlite3_vfs *pVfs, int nBuf, char *zBuf){
+ DWORD e = osGetLastError();
UNUSED_PARAMETER(pVfs);
- return winGetLastErrorMsg(osGetLastError(), nBuf, zBuf);
+ if( nBuf>0 ) winGetLastErrorMsg(e, nBuf, zBuf);
+ return e;
}
/*
** Initialize and deinitialize the operating system interface.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void){
+SQLITE_API int sqlite3_os_init(void){
static sqlite3_vfs winVfs = {
- 3, /* iVersion */
- sizeof(winFile), /* szOsFile */
+ 3, /* iVersion */
+ sizeof(winFile), /* szOsFile */
SQLITE_WIN32_MAX_PATH_BYTES, /* mxPathname */
- 0, /* pNext */
- "win32", /* zName */
- 0, /* pAppData */
- winOpen, /* xOpen */
- winDelete, /* xDelete */
- winAccess, /* xAccess */
- winFullPathname, /* xFullPathname */
- winDlOpen, /* xDlOpen */
- winDlError, /* xDlError */
- winDlSym, /* xDlSym */
- winDlClose, /* xDlClose */
- winRandomness, /* xRandomness */
- winSleep, /* xSleep */
- winCurrentTime, /* xCurrentTime */
- winGetLastError, /* xGetLastError */
- winCurrentTimeInt64, /* xCurrentTimeInt64 */
- winSetSystemCall, /* xSetSystemCall */
- winGetSystemCall, /* xGetSystemCall */
- winNextSystemCall, /* xNextSystemCall */
+ 0, /* pNext */
+ "win32", /* zName */
+ &winAppData, /* pAppData */
+ winOpen, /* xOpen */
+ winDelete, /* xDelete */
+ winAccess, /* xAccess */
+ winFullPathname, /* xFullPathname */
+ winDlOpen, /* xDlOpen */
+ winDlError, /* xDlError */
+ winDlSym, /* xDlSym */
+ winDlClose, /* xDlClose */
+ winRandomness, /* xRandomness */
+ winSleep, /* xSleep */
+ winCurrentTime, /* xCurrentTime */
+ winGetLastError, /* xGetLastError */
+ winCurrentTimeInt64, /* xCurrentTimeInt64 */
+ winSetSystemCall, /* xSetSystemCall */
+ winGetSystemCall, /* xGetSystemCall */
+ winNextSystemCall, /* xNextSystemCall */
};
#if defined(SQLITE_WIN32_HAS_WIDE)
static sqlite3_vfs winLongPathVfs = {
- 3, /* iVersion */
- sizeof(winFile), /* szOsFile */
+ 3, /* iVersion */
+ sizeof(winFile), /* szOsFile */
+ SQLITE_WINNT_MAX_PATH_BYTES, /* mxPathname */
+ 0, /* pNext */
+ "win32-longpath", /* zName */
+ &winAppData, /* pAppData */
+ winOpen, /* xOpen */
+ winDelete, /* xDelete */
+ winAccess, /* xAccess */
+ winFullPathname, /* xFullPathname */
+ winDlOpen, /* xDlOpen */
+ winDlError, /* xDlError */
+ winDlSym, /* xDlSym */
+ winDlClose, /* xDlClose */
+ winRandomness, /* xRandomness */
+ winSleep, /* xSleep */
+ winCurrentTime, /* xCurrentTime */
+ winGetLastError, /* xGetLastError */
+ winCurrentTimeInt64, /* xCurrentTimeInt64 */
+ winSetSystemCall, /* xSetSystemCall */
+ winGetSystemCall, /* xGetSystemCall */
+ winNextSystemCall, /* xNextSystemCall */
+ };
+#endif
+ static sqlite3_vfs winNolockVfs = {
+ 3, /* iVersion */
+ sizeof(winFile), /* szOsFile */
+ SQLITE_WIN32_MAX_PATH_BYTES, /* mxPathname */
+ 0, /* pNext */
+ "win32-none", /* zName */
+ &winNolockAppData, /* pAppData */
+ winOpen, /* xOpen */
+ winDelete, /* xDelete */
+ winAccess, /* xAccess */
+ winFullPathname, /* xFullPathname */
+ winDlOpen, /* xDlOpen */
+ winDlError, /* xDlError */
+ winDlSym, /* xDlSym */
+ winDlClose, /* xDlClose */
+ winRandomness, /* xRandomness */
+ winSleep, /* xSleep */
+ winCurrentTime, /* xCurrentTime */
+ winGetLastError, /* xGetLastError */
+ winCurrentTimeInt64, /* xCurrentTimeInt64 */
+ winSetSystemCall, /* xSetSystemCall */
+ winGetSystemCall, /* xGetSystemCall */
+ winNextSystemCall, /* xNextSystemCall */
+ };
+#if defined(SQLITE_WIN32_HAS_WIDE)
+ static sqlite3_vfs winLongPathNolockVfs = {
+ 3, /* iVersion */
+ sizeof(winFile), /* szOsFile */
SQLITE_WINNT_MAX_PATH_BYTES, /* mxPathname */
- 0, /* pNext */
- "win32-longpath", /* zName */
- 0, /* pAppData */
- winOpen, /* xOpen */
- winDelete, /* xDelete */
- winAccess, /* xAccess */
- winFullPathname, /* xFullPathname */
- winDlOpen, /* xDlOpen */
- winDlError, /* xDlError */
- winDlSym, /* xDlSym */
- winDlClose, /* xDlClose */
- winRandomness, /* xRandomness */
- winSleep, /* xSleep */
- winCurrentTime, /* xCurrentTime */
- winGetLastError, /* xGetLastError */
- winCurrentTimeInt64, /* xCurrentTimeInt64 */
- winSetSystemCall, /* xSetSystemCall */
- winGetSystemCall, /* xGetSystemCall */
- winNextSystemCall, /* xNextSystemCall */
+ 0, /* pNext */
+ "win32-longpath-none", /* zName */
+ &winNolockAppData, /* pAppData */
+ winOpen, /* xOpen */
+ winDelete, /* xDelete */
+ winAccess, /* xAccess */
+ winFullPathname, /* xFullPathname */
+ winDlOpen, /* xDlOpen */
+ winDlError, /* xDlError */
+ winDlSym, /* xDlSym */
+ winDlClose, /* xDlClose */
+ winRandomness, /* xRandomness */
+ winSleep, /* xSleep */
+ winCurrentTime, /* xCurrentTime */
+ winGetLastError, /* xGetLastError */
+ winCurrentTimeInt64, /* xCurrentTimeInt64 */
+ winSetSystemCall, /* xSetSystemCall */
+ winGetSystemCall, /* xGetSystemCall */
+ winNextSystemCall, /* xNextSystemCall */
};
#endif
sqlite3_vfs_register(&winLongPathVfs, 0);
#endif
+ sqlite3_vfs_register(&winNolockVfs, 0);
+
+#if defined(SQLITE_WIN32_HAS_WIDE)
+ sqlite3_vfs_register(&winLongPathNolockVfs, 0);
+#endif
+
+#ifndef SQLITE_OMIT_WAL
+ winBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1);
+#endif
+
return SQLITE_OK;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void){
+SQLITE_API int sqlite3_os_end(void){
#if SQLITE_OS_WINRT
if( sleepObj!=NULL ){
osCloseHandle(sleepObj);
sleepObj = NULL;
}
#endif
+
+#ifndef SQLITE_OMIT_WAL
+ winBigLock = 0;
+#endif
+
return SQLITE_OK;
}
#endif /* SQLITE_OS_WIN */
/************** End of os_win.c **********************************************/
+/************** Begin file memdb.c *******************************************/
+/*
+** 2016-09-07
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file implements an in-memory VFS. A database is held as a contiguous
+** block of memory.
+**
+** This file also implements interface sqlite3_serialize() and
+** sqlite3_deserialize().
+*/
+#ifdef SQLITE_ENABLE_DESERIALIZE
+/* #include "sqliteInt.h" */
+
+/*
+** Forward declaration of objects used by this utility
+*/
+typedef struct sqlite3_vfs MemVfs;
+typedef struct MemFile MemFile;
+
+/* Access to a lower-level VFS that (might) implement dynamic loading,
+** access to randomness, etc.
+*/
+#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData))
+
+/* An open file */
+struct MemFile {
+ sqlite3_file base; /* IO methods */
+ sqlite3_int64 sz; /* Size of the file */
+ sqlite3_int64 szMax; /* Space allocated to aData */
+ unsigned char *aData; /* content of the file */
+ int nMmap; /* Number of memory mapped pages */
+ unsigned mFlags; /* Flags */
+ int eLock; /* Most recent lock against this file */
+};
+
+/*
+** Methods for MemFile
+*/
+static int memdbClose(sqlite3_file*);
+static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
+static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst);
+static int memdbTruncate(sqlite3_file*, sqlite3_int64 size);
+static int memdbSync(sqlite3_file*, int flags);
+static int memdbFileSize(sqlite3_file*, sqlite3_int64 *pSize);
+static int memdbLock(sqlite3_file*, int);
+/* static int memdbCheckReservedLock(sqlite3_file*, int *pResOut);// not used */
+static int memdbFileControl(sqlite3_file*, int op, void *pArg);
+/* static int memdbSectorSize(sqlite3_file*); // not used */
+static int memdbDeviceCharacteristics(sqlite3_file*);
+static int memdbFetch(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
+static int memdbUnfetch(sqlite3_file*, sqlite3_int64 iOfst, void *p);
+
+/*
+** Methods for MemVfs
+*/
+static int memdbOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *);
+/* static int memdbDelete(sqlite3_vfs*, const char *zName, int syncDir); */
+static int memdbAccess(sqlite3_vfs*, const char *zName, int flags, int *);
+static int memdbFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut);
+static void *memdbDlOpen(sqlite3_vfs*, const char *zFilename);
+static void memdbDlError(sqlite3_vfs*, int nByte, char *zErrMsg);
+static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char*zSym))(void);
+static void memdbDlClose(sqlite3_vfs*, void*);
+static int memdbRandomness(sqlite3_vfs*, int nByte, char *zOut);
+static int memdbSleep(sqlite3_vfs*, int microseconds);
+/* static int memdbCurrentTime(sqlite3_vfs*, double*); */
+static int memdbGetLastError(sqlite3_vfs*, int, char *);
+static int memdbCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*);
+
+static sqlite3_vfs memdb_vfs = {
+ 2, /* iVersion */
+ 0, /* szOsFile (set when registered) */
+ 1024, /* mxPathname */
+ 0, /* pNext */
+ "memdb", /* zName */
+ 0, /* pAppData (set when registered) */
+ memdbOpen, /* xOpen */
+ 0, /* memdbDelete, */ /* xDelete */
+ memdbAccess, /* xAccess */
+ memdbFullPathname, /* xFullPathname */
+ memdbDlOpen, /* xDlOpen */
+ memdbDlError, /* xDlError */
+ memdbDlSym, /* xDlSym */
+ memdbDlClose, /* xDlClose */
+ memdbRandomness, /* xRandomness */
+ memdbSleep, /* xSleep */
+ 0, /* memdbCurrentTime, */ /* xCurrentTime */
+ memdbGetLastError, /* xGetLastError */
+ memdbCurrentTimeInt64 /* xCurrentTimeInt64 */
+};
+
+static const sqlite3_io_methods memdb_io_methods = {
+ 3, /* iVersion */
+ memdbClose, /* xClose */
+ memdbRead, /* xRead */
+ memdbWrite, /* xWrite */
+ memdbTruncate, /* xTruncate */
+ memdbSync, /* xSync */
+ memdbFileSize, /* xFileSize */
+ memdbLock, /* xLock */
+ memdbLock, /* xUnlock - same as xLock in this case */
+ 0, /* memdbCheckReservedLock, */ /* xCheckReservedLock */
+ memdbFileControl, /* xFileControl */
+ 0, /* memdbSectorSize,*/ /* xSectorSize */
+ memdbDeviceCharacteristics, /* xDeviceCharacteristics */
+ 0, /* xShmMap */
+ 0, /* xShmLock */
+ 0, /* xShmBarrier */
+ 0, /* xShmUnmap */
+ memdbFetch, /* xFetch */
+ memdbUnfetch /* xUnfetch */
+};
+
+
+
+/*
+** Close an memdb-file.
+**
+** The pData pointer is owned by the application, so there is nothing
+** to free.
+*/
+static int memdbClose(sqlite3_file *pFile){
+ MemFile *p = (MemFile *)pFile;
+ if( p->mFlags & SQLITE_DESERIALIZE_FREEONCLOSE ) sqlite3_free(p->aData);
+ return SQLITE_OK;
+}
+
+/*
+** Read data from an memdb-file.
+*/
+static int memdbRead(
+ sqlite3_file *pFile,
+ void *zBuf,
+ int iAmt,
+ sqlite_int64 iOfst
+){
+ MemFile *p = (MemFile *)pFile;
+ if( iOfst+iAmt>p->sz ){
+ memset(zBuf, 0, iAmt);
+ if( iOfst<p->sz ) memcpy(zBuf, p->aData+iOfst, p->sz - iOfst);
+ return SQLITE_IOERR_SHORT_READ;
+ }
+ memcpy(zBuf, p->aData+iOfst, iAmt);
+ return SQLITE_OK;
+}
+
+/*
+** Try to enlarge the memory allocation to hold at least sz bytes
+*/
+static int memdbEnlarge(MemFile *p, sqlite3_int64 newSz){
+ unsigned char *pNew;
+ if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || p->nMmap>0 ){
+ return SQLITE_FULL;
+ }
+ pNew = sqlite3_realloc64(p->aData, newSz);
+ if( pNew==0 ) return SQLITE_NOMEM;
+ p->aData = pNew;
+ p->szMax = newSz;
+ return SQLITE_OK;
+}
+
+/*
+** Write data to an memdb-file.
+*/
+static int memdbWrite(
+ sqlite3_file *pFile,
+ const void *z,
+ int iAmt,
+ sqlite_int64 iOfst
+){
+ MemFile *p = (MemFile *)pFile;
+ if( iOfst+iAmt>p->sz ){
+ int rc;
+ if( iOfst+iAmt>p->szMax
+ && (rc = memdbEnlarge(p, (iOfst+iAmt)*2))!=SQLITE_OK
+ ){
+ return rc;
+ }
+ if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz);
+ p->sz = iOfst+iAmt;
+ }
+ memcpy(p->aData+iOfst, z, iAmt);
+ return SQLITE_OK;
+}
+
+/*
+** Truncate an memdb-file.
+**
+** In rollback mode (which is always the case for memdb, as it does not
+** support WAL mode) the truncate() method is only used to reduce
+** the size of a file, never to increase the size.
+*/
+static int memdbTruncate(sqlite3_file *pFile, sqlite_int64 size){
+ MemFile *p = (MemFile *)pFile;
+ if( NEVER(size>p->sz) ) return SQLITE_FULL;
+ p->sz = size;
+ return SQLITE_OK;
+}
+
+/*
+** Sync an memdb-file.
+*/
+static int memdbSync(sqlite3_file *pFile, int flags){
+ return SQLITE_OK;
+}
+
+/*
+** Return the current file-size of an memdb-file.
+*/
+static int memdbFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){
+ MemFile *p = (MemFile *)pFile;
+ *pSize = p->sz;
+ return SQLITE_OK;
+}
+
+/*
+** Lock an memdb-file.
+*/
+static int memdbLock(sqlite3_file *pFile, int eLock){
+ MemFile *p = (MemFile *)pFile;
+ p->eLock = eLock;
+ return SQLITE_OK;
+}
+
+#if 0 /* Never used because memdbAccess() always returns false */
+/*
+** Check if another file-handle holds a RESERVED lock on an memdb-file.
+*/
+static int memdbCheckReservedLock(sqlite3_file *pFile, int *pResOut){
+ *pResOut = 0;
+ return SQLITE_OK;
+}
+#endif
+
+/*
+** File control method. For custom operations on an memdb-file.
+*/
+static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){
+ MemFile *p = (MemFile *)pFile;
+ int rc = SQLITE_NOTFOUND;
+ if( op==SQLITE_FCNTL_VFSNAME ){
+ *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz);
+ rc = SQLITE_OK;
+ }
+ return rc;
+}
+
+#if 0 /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */
+/*
+** Return the sector-size in bytes for an memdb-file.
+*/
+static int memdbSectorSize(sqlite3_file *pFile){
+ return 1024;
+}
+#endif
+
+/*
+** Return the device characteristic flags supported by an memdb-file.
+*/
+static int memdbDeviceCharacteristics(sqlite3_file *pFile){
+ return SQLITE_IOCAP_ATOMIC |
+ SQLITE_IOCAP_POWERSAFE_OVERWRITE |
+ SQLITE_IOCAP_SAFE_APPEND |
+ SQLITE_IOCAP_SEQUENTIAL;
+}
+
+/* Fetch a page of a memory-mapped file */
+static int memdbFetch(
+ sqlite3_file *pFile,
+ sqlite3_int64 iOfst,
+ int iAmt,
+ void **pp
+){
+ MemFile *p = (MemFile *)pFile;
+ p->nMmap++;
+ *pp = (void*)(p->aData + iOfst);
+ return SQLITE_OK;
+}
+
+/* Release a memory-mapped page */
+static int memdbUnfetch(sqlite3_file *pFile, sqlite3_int64 iOfst, void *pPage){
+ MemFile *p = (MemFile *)pFile;
+ p->nMmap--;
+ return SQLITE_OK;
+}
+
+/*
+** Open an mem file handle.
+*/
+static int memdbOpen(
+ sqlite3_vfs *pVfs,
+ const char *zName,
+ sqlite3_file *pFile,
+ int flags,
+ int *pOutFlags
+){
+ MemFile *p = (MemFile*)pFile;
+ if( (flags & SQLITE_OPEN_MAIN_DB)==0 ){
+ return ORIGVFS(pVfs)->xOpen(ORIGVFS(pVfs), zName, pFile, flags, pOutFlags);
+ }
+ memset(p, 0, sizeof(*p));
+ p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE;
+ assert( pOutFlags!=0 ); /* True because flags==SQLITE_OPEN_MAIN_DB */
+ *pOutFlags = flags | SQLITE_OPEN_MEMORY;
+ p->base.pMethods = &memdb_io_methods;
+ return SQLITE_OK;
+}
+
+#if 0 /* Only used to delete rollback journals, master journals, and WAL
+ ** files, none of which exist in memdb. So this routine is never used */
+/*
+** Delete the file located at zPath. If the dirSync argument is true,
+** ensure the file-system modifications are synced to disk before
+** returning.
+*/
+static int memdbDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){
+ return SQLITE_IOERR_DELETE;
+}
+#endif
+
+/*
+** Test for access permissions. Return true if the requested permission
+** is available, or false otherwise.
+**
+** With memdb, no files ever exist on disk. So always return false.
+*/
+static int memdbAccess(
+ sqlite3_vfs *pVfs,
+ const char *zPath,
+ int flags,
+ int *pResOut
+){
+ *pResOut = 0;
+ return SQLITE_OK;
+}
+
+/*
+** Populate buffer zOut with the full canonical pathname corresponding
+** to the pathname in zPath. zOut is guaranteed to point to a buffer
+** of at least (INST_MAX_PATHNAME+1) bytes.
+*/
+static int memdbFullPathname(
+ sqlite3_vfs *pVfs,
+ const char *zPath,
+ int nOut,
+ char *zOut
+){
+ sqlite3_snprintf(nOut, zOut, "%s", zPath);
+ return SQLITE_OK;
+}
+
+/*
+** Open the dynamic library located at zPath and return a handle.
+*/
+static void *memdbDlOpen(sqlite3_vfs *pVfs, const char *zPath){
+ return ORIGVFS(pVfs)->xDlOpen(ORIGVFS(pVfs), zPath);
+}
+
+/*
+** Populate the buffer zErrMsg (size nByte bytes) with a human readable
+** utf-8 string describing the most recent error encountered associated
+** with dynamic libraries.
+*/
+static void memdbDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){
+ ORIGVFS(pVfs)->xDlError(ORIGVFS(pVfs), nByte, zErrMsg);
+}
+
+/*
+** Return a pointer to the symbol zSymbol in the dynamic library pHandle.
+*/
+static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){
+ return ORIGVFS(pVfs)->xDlSym(ORIGVFS(pVfs), p, zSym);
+}
+
+/*
+** Close the dynamic library handle pHandle.
+*/
+static void memdbDlClose(sqlite3_vfs *pVfs, void *pHandle){
+ ORIGVFS(pVfs)->xDlClose(ORIGVFS(pVfs), pHandle);
+}
+
+/*
+** Populate the buffer pointed to by zBufOut with nByte bytes of
+** random data.
+*/
+static int memdbRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){
+ return ORIGVFS(pVfs)->xRandomness(ORIGVFS(pVfs), nByte, zBufOut);
+}
+
+/*
+** Sleep for nMicro microseconds. Return the number of microseconds
+** actually slept.
+*/
+static int memdbSleep(sqlite3_vfs *pVfs, int nMicro){
+ return ORIGVFS(pVfs)->xSleep(ORIGVFS(pVfs), nMicro);
+}
+
+#if 0 /* Never used. Modern cores only call xCurrentTimeInt64() */
+/*
+** Return the current time as a Julian Day number in *pTimeOut.
+*/
+static int memdbCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){
+ return ORIGVFS(pVfs)->xCurrentTime(ORIGVFS(pVfs), pTimeOut);
+}
+#endif
+
+static int memdbGetLastError(sqlite3_vfs *pVfs, int a, char *b){
+ return ORIGVFS(pVfs)->xGetLastError(ORIGVFS(pVfs), a, b);
+}
+static int memdbCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *p){
+ return ORIGVFS(pVfs)->xCurrentTimeInt64(ORIGVFS(pVfs), p);
+}
+
+/*
+** Translate a database connection pointer and schema name into a
+** MemFile pointer.
+*/
+static MemFile *memdbFromDbSchema(sqlite3 *db, const char *zSchema){
+ MemFile *p = 0;
+ int rc = sqlite3_file_control(db, zSchema, SQLITE_FCNTL_FILE_POINTER, &p);
+ if( rc ) return 0;
+ if( p->base.pMethods!=&memdb_io_methods ) return 0;
+ return p;
+}
+
+/*
+** Return the serialization of a database
+*/
+SQLITE_API unsigned char *sqlite3_serialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which database within the connection */
+ sqlite3_int64 *piSize, /* Write size here, if not NULL */
+ unsigned int mFlags /* Maybe SQLITE_SERIALIZE_NOCOPY */
+){
+ MemFile *p;
+ int iDb;
+ Btree *pBt;
+ sqlite3_int64 sz;
+ int szPage = 0;
+ sqlite3_stmt *pStmt = 0;
+ unsigned char *pOut;
+ char *zSql;
+ int rc;
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+
+ if( zSchema==0 ) zSchema = db->aDb[0].zDbSName;
+ p = memdbFromDbSchema(db, zSchema);
+ iDb = sqlite3FindDbName(db, zSchema);
+ if( piSize ) *piSize = -1;
+ if( iDb<0 ) return 0;
+ if( p ){
+ if( piSize ) *piSize = p->sz;
+ if( mFlags & SQLITE_SERIALIZE_NOCOPY ){
+ pOut = p->aData;
+ }else{
+ pOut = sqlite3_malloc64( p->sz );
+ if( pOut ) memcpy(pOut, p->aData, p->sz);
+ }
+ return pOut;
+ }
+ pBt = db->aDb[iDb].pBt;
+ if( pBt==0 ) return 0;
+ szPage = sqlite3BtreeGetPageSize(pBt);
+ zSql = sqlite3_mprintf("PRAGMA \"%w\".page_count", zSchema);
+ rc = zSql ? sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0) : SQLITE_NOMEM;
+ sqlite3_free(zSql);
+ if( rc ) return 0;
+ rc = sqlite3_step(pStmt);
+ if( rc!=SQLITE_ROW ){
+ pOut = 0;
+ }else{
+ sz = sqlite3_column_int64(pStmt, 0)*szPage;
+ if( piSize ) *piSize = sz;
+ if( mFlags & SQLITE_SERIALIZE_NOCOPY ){
+ pOut = 0;
+ }else{
+ pOut = sqlite3_malloc64( sz );
+ if( pOut ){
+ int nPage = sqlite3_column_int(pStmt, 0);
+ Pager *pPager = sqlite3BtreePager(pBt);
+ int pgno;
+ for(pgno=1; pgno<=nPage; pgno++){
+ DbPage *pPage = 0;
+ unsigned char *pTo = pOut + szPage*(sqlite3_int64)(pgno-1);
+ rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pPage, 0);
+ if( rc==SQLITE_OK ){
+ memcpy(pTo, sqlite3PagerGetData(pPage), szPage);
+ }else{
+ memset(pTo, 0, szPage);
+ }
+ sqlite3PagerUnref(pPage);
+ }
+ }
+ }
+ }
+ sqlite3_finalize(pStmt);
+ return pOut;
+}
+
+/* Convert zSchema to a MemDB and initialize its content.
+*/
+SQLITE_API int sqlite3_deserialize(
+ sqlite3 *db, /* The database connection */
+ const char *zSchema, /* Which DB to reopen with the deserialization */
+ unsigned char *pData, /* The serialized database content */
+ sqlite3_int64 szDb, /* Number bytes in the deserialization */
+ sqlite3_int64 szBuf, /* Total size of buffer pData[] */
+ unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */
+){
+ MemFile *p;
+ char *zSql;
+ sqlite3_stmt *pStmt = 0;
+ int rc;
+ int iDb;
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ return SQLITE_MISUSE_BKPT;
+ }
+ if( szDb<0 ) return SQLITE_MISUSE_BKPT;
+ if( szBuf<0 ) return SQLITE_MISUSE_BKPT;
+#endif
+
+ sqlite3_mutex_enter(db->mutex);
+ if( zSchema==0 ) zSchema = db->aDb[0].zDbSName;
+ iDb = sqlite3FindDbName(db, zSchema);
+ if( iDb<0 ){
+ rc = SQLITE_ERROR;
+ goto end_deserialize;
+ }
+ zSql = sqlite3_mprintf("ATTACH x AS %Q", zSchema);
+ rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0);
+ sqlite3_free(zSql);
+ if( rc ) goto end_deserialize;
+ db->init.iDb = (u8)iDb;
+ db->init.reopenMemdb = 1;
+ rc = sqlite3_step(pStmt);
+ db->init.reopenMemdb = 0;
+ if( rc!=SQLITE_DONE ){
+ rc = SQLITE_ERROR;
+ goto end_deserialize;
+ }
+ p = memdbFromDbSchema(db, zSchema);
+ if( p==0 ){
+ rc = SQLITE_ERROR;
+ }else{
+ p->aData = pData;
+ p->sz = szDb;
+ p->szMax = szBuf;
+ p->mFlags = mFlags;
+ rc = SQLITE_OK;
+ }
+
+end_deserialize:
+ sqlite3_finalize(pStmt);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+/*
+** This routine is called when the extension is loaded.
+** Register the new VFS.
+*/
+SQLITE_PRIVATE int sqlite3MemdbInit(void){
+ sqlite3_vfs *pLower = sqlite3_vfs_find(0);
+ int sz = pLower->szOsFile;
+ memdb_vfs.pAppData = pLower;
+ /* In all known configurations of SQLite, the size of a default
+ ** sqlite3_file is greater than the size of a memdb sqlite3_file.
+ ** Should that ever change, remove the following NEVER() */
+ if( NEVER(sz<sizeof(MemFile)) ) sz = sizeof(MemFile);
+ memdb_vfs.szOsFile = sz;
+ return sqlite3_vfs_register(&memdb_vfs, 0);
+}
+#endif /* SQLITE_ENABLE_DESERIALIZE */
+
+/************** End of memdb.c ***********************************************/
/************** Begin file bitvec.c ******************************************/
/*
** 2008 February 16
/* Round the union size down to the nearest pointer boundary, since that's how
** it will be aligned within the Bitvec struct. */
-#define BITVEC_USIZE (((BITVEC_SZ-(3*sizeof(u32)))/sizeof(Bitvec*))*sizeof(Bitvec*))
+#define BITVEC_USIZE \
+ (((BITVEC_SZ-(3*sizeof(u32)))/sizeof(Bitvec*))*sizeof(Bitvec*))
/* Type of the array "element" for the bitmap representation.
** Should be a power of 2, and ideally, evenly divide into BITVEC_USIZE.
i = i%p->iDivisor;
if( p->u.apSub[bin]==0 ){
p->u.apSub[bin] = sqlite3BitvecCreate( p->iDivisor );
- if( p->u.apSub[bin]==0 ) return SQLITE_NOMEM;
+ if( p->u.apSub[bin]==0 ) return SQLITE_NOMEM_BKPT;
}
p = p->u.apSub[bin];
}
int rc;
u32 *aiValues = sqlite3StackAllocRaw(0, sizeof(p->u.aHash));
if( aiValues==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}else{
memcpy(aiValues, p->u.aHash, sizeof(p->u.aHash));
memset(p->u.apSub, 0, sizeof(p->u.apSub));
return p->iSize;
}
-#ifndef SQLITE_OMIT_BUILTIN_TEST
+#ifndef SQLITE_UNTESTABLE
/*
** Let V[] be an array of unsigned characters sufficient to hold
** up to N bits. Let I be an integer between 0 and N. 0<=I<N.
sqlite3BitvecDestroy(pBitvec);
return rc;
}
-#endif /* SQLITE_OMIT_BUILTIN_TEST */
+#endif /* SQLITE_UNTESTABLE */
/************** End of bitvec.c **********************************************/
/************** Begin file pcache.c ******************************************/
/* #include "sqliteInt.h" */
/*
-** A complete page cache is an instance of this structure.
+** A complete page cache is an instance of this structure. Every
+** entry in the cache holds a single page of the database file. The
+** btree layer only operates on the cached copy of the database pages.
+**
+** A page cache entry is "clean" if it exactly matches what is currently
+** on disk. A page is "dirty" if it has been modified and needs to be
+** persisted to disk.
+**
+** pDirty, pDirtyTail, pSynced:
+** All dirty pages are linked into the doubly linked list using
+** PgHdr.pDirtyNext and pDirtyPrev. The list is maintained in LRU order
+** such that p was added to the list more recently than p->pDirtyNext.
+** PCache.pDirty points to the first (newest) element in the list and
+** pDirtyTail to the last (oldest).
+**
+** The PCache.pSynced variable is used to optimize searching for a dirty
+** page to eject from the cache mid-transaction. It is better to eject
+** a page that does not require a journal sync than one that does.
+** Therefore, pSynced is maintained to that it *almost* always points
+** to either the oldest page in the pDirty/pDirtyTail list that has a
+** clear PGHDR_NEED_SYNC flag or to a page that is older than this one
+** (so that the right page to eject can be found by following pDirtyPrev
+** pointers).
*/
struct PCache {
PgHdr *pDirty, *pDirtyTail; /* List of dirty pages in LRU order */
PgHdr *pSynced; /* Last synced page in dirty page list */
int nRefSum; /* Sum of ref counts over all pages */
int szCache; /* Configured cache size */
+ int szSpill; /* Size before spilling occurs */
int szPage; /* Size of every page in this cache */
int szExtra; /* Size of extra space for each page */
u8 bPurgeable; /* True if pages are on backing store */
sqlite3_pcache *pCache; /* Pluggable cache module */
};
+/********************************** Test and Debug Logic **********************/
+/*
+** Debug tracing macros. Enable by by changing the "0" to "1" and
+** recompiling.
+**
+** When sqlite3PcacheTrace is 1, single line trace messages are issued.
+** When sqlite3PcacheTrace is 2, a dump of the pcache showing all cache entries
+** is displayed for many operations, resulting in a lot of output.
+*/
+#if defined(SQLITE_DEBUG) && 0
+ int sqlite3PcacheTrace = 2; /* 0: off 1: simple 2: cache dumps */
+ int sqlite3PcacheMxDump = 9999; /* Max cache entries for pcacheDump() */
+# define pcacheTrace(X) if(sqlite3PcacheTrace){sqlite3DebugPrintf X;}
+ void pcacheDump(PCache *pCache){
+ int N;
+ int i, j;
+ sqlite3_pcache_page *pLower;
+ PgHdr *pPg;
+ unsigned char *a;
+
+ if( sqlite3PcacheTrace<2 ) return;
+ if( pCache->pCache==0 ) return;
+ N = sqlite3PcachePagecount(pCache);
+ if( N>sqlite3PcacheMxDump ) N = sqlite3PcacheMxDump;
+ for(i=1; i<=N; i++){
+ pLower = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, i, 0);
+ if( pLower==0 ) continue;
+ pPg = (PgHdr*)pLower->pExtra;
+ printf("%3d: nRef %2d flgs %02x data ", i, pPg->nRef, pPg->flags);
+ a = (unsigned char *)pLower->pBuf;
+ for(j=0; j<12; j++) printf("%02x", a[j]);
+ printf("\n");
+ if( pPg->pPage==0 ){
+ sqlite3GlobalConfig.pcache2.xUnpin(pCache->pCache, pLower, 0);
+ }
+ }
+ }
+ #else
+# define pcacheTrace(X)
+# define pcacheDump(X)
+#endif
+
+/*
+** Check invariants on a PgHdr entry. Return true if everything is OK.
+** Return false if any invariant is violated.
+**
+** This routine is for use inside of assert() statements only. For
+** example:
+**
+** assert( sqlite3PcachePageSanity(pPg) );
+*/
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3PcachePageSanity(PgHdr *pPg){
+ PCache *pCache;
+ assert( pPg!=0 );
+ assert( pPg->pgno>0 || pPg->pPager==0 ); /* Page number is 1 or more */
+ pCache = pPg->pCache;
+ assert( pCache!=0 ); /* Every page has an associated PCache */
+ if( pPg->flags & PGHDR_CLEAN ){
+ assert( (pPg->flags & PGHDR_DIRTY)==0 );/* Cannot be both CLEAN and DIRTY */
+ assert( pCache->pDirty!=pPg ); /* CLEAN pages not on dirty list */
+ assert( pCache->pDirtyTail!=pPg );
+ }
+ /* WRITEABLE pages must also be DIRTY */
+ if( pPg->flags & PGHDR_WRITEABLE ){
+ assert( pPg->flags & PGHDR_DIRTY ); /* WRITEABLE implies DIRTY */
+ }
+ /* NEED_SYNC can be set independently of WRITEABLE. This can happen,
+ ** for example, when using the sqlite3PagerDontWrite() optimization:
+ ** (1) Page X is journalled, and gets WRITEABLE and NEED_SEEK.
+ ** (2) Page X moved to freelist, WRITEABLE is cleared
+ ** (3) Page X reused, WRITEABLE is set again
+ ** If NEED_SYNC had been cleared in step 2, then it would not be reset
+ ** in step 3, and page might be written into the database without first
+ ** syncing the rollback journal, which might cause corruption on a power
+ ** loss.
+ **
+ ** Another example is when the database page size is smaller than the
+ ** disk sector size. When any page of a sector is journalled, all pages
+ ** in that sector are marked NEED_SYNC even if they are still CLEAN, just
+ ** in case they are later modified, since all pages in the same sector
+ ** must be journalled and synced before any of those pages can be safely
+ ** written.
+ */
+ return 1;
+}
+#endif /* SQLITE_DEBUG */
+
+
/********************************** Linked List Management ********************/
/* Allowed values for second argument to pcacheManageDirtyList() */
static void pcacheManageDirtyList(PgHdr *pPage, u8 addRemove){
PCache *p = pPage->pCache;
+ pcacheTrace(("%p.DIRTYLIST.%s %d\n", p,
+ addRemove==1 ? "REMOVE" : addRemove==2 ? "ADD" : "FRONT",
+ pPage->pgno));
if( addRemove & PCACHE_DIRTYLIST_REMOVE ){
assert( pPage->pDirtyNext || pPage==p->pDirtyTail );
assert( pPage->pDirtyPrev || pPage==p->pDirty );
/* Update the PCache1.pSynced variable if necessary. */
if( p->pSynced==pPage ){
- PgHdr *pSynced = pPage->pDirtyPrev;
- while( pSynced && (pSynced->flags&PGHDR_NEED_SYNC) ){
- pSynced = pSynced->pDirtyPrev;
- }
- p->pSynced = pSynced;
+ p->pSynced = pPage->pDirtyPrev;
}
if( pPage->pDirtyNext ){
if( pPage->pDirtyPrev ){
pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext;
}else{
+ /* If there are now no dirty pages in the cache, set eCreate to 2.
+ ** This is an optimization that allows sqlite3PcacheFetch() to skip
+ ** searching for a dirty page to eject from the cache when it might
+ ** otherwise have to. */
assert( pPage==p->pDirty );
p->pDirty = pPage->pDirtyNext;
- if( p->pDirty==0 && p->bPurgeable ){
- assert( p->eCreate==1 );
+ assert( p->bPurgeable || p->eCreate==2 );
+ if( p->pDirty==0 ){ /*OPTIMIZATION-IF-TRUE*/
+ assert( p->bPurgeable==0 || p->eCreate==1 );
p->eCreate = 2;
}
}
- pPage->pDirtyNext = 0;
- pPage->pDirtyPrev = 0;
}
if( addRemove & PCACHE_DIRTYLIST_ADD ){
- assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage );
-
+ pPage->pDirtyPrev = 0;
pPage->pDirtyNext = p->pDirty;
if( pPage->pDirtyNext ){
assert( pPage->pDirtyNext->pDirtyPrev==0 );
}
}
p->pDirty = pPage;
- if( !p->pSynced && 0==(pPage->flags&PGHDR_NEED_SYNC) ){
+
+ /* If pSynced is NULL and this page has a clear NEED_SYNC flag, set
+ ** pSynced to point to it. Checking the NEED_SYNC flag is an
+ ** optimization, as if pSynced points to a page with the NEED_SYNC
+ ** flag set sqlite3PcacheFetchStress() searches through all newer
+ ** entries of the dirty-list for a page with NEED_SYNC clear anyway. */
+ if( !p->pSynced
+ && 0==(pPage->flags&PGHDR_NEED_SYNC) /*OPTIMIZATION-IF-FALSE*/
+ ){
p->pSynced = pPage;
}
}
+ pcacheDump(p);
}
/*
*/
static void pcacheUnpin(PgHdr *p){
if( p->pCache->bPurgeable ){
+ pcacheTrace(("%p.UNPIN %d\n", p->pCache, p->pgno));
sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 0);
+ pcacheDump(p->pCache);
}
}
/*
-** Compute the number of pages of cache requested. p->szCache is the
+** Compute the number of pages of cache requested. p->szCache is the
** cache size requested by the "PRAGMA cache_size" statement.
-**
-**
*/
static int numberOfCachePages(PCache *p){
if( p->szCache>=0 ){
** has already been allocated and is passed in as the p pointer.
** The caller discovers how much space needs to be allocated by
** calling sqlite3PcacheSize().
+**
+** szExtra is some extra space allocated for each page. The first
+** 8 bytes of the extra space will be zeroed as the page is allocated,
+** but remaining content will be uninitialized. Though it is opaque
+** to this module, the extra space really ends up being the MemPage
+** structure in the pager.
*/
SQLITE_PRIVATE int sqlite3PcacheOpen(
int szPage, /* Size of every page */
memset(p, 0, sizeof(PCache));
p->szPage = 1;
p->szExtra = szExtra;
+ assert( szExtra>=8 ); /* First 8 bytes will be zeroed */
p->bPurgeable = bPurgeable;
p->eCreate = 2;
p->xStress = xStress;
p->pStress = pStress;
p->szCache = 100;
+ p->szSpill = 1;
+ pcacheTrace(("%p.OPEN szPage %d bPurgeable %d\n",p,szPage,bPurgeable));
return sqlite3PcacheSetPageSize(p, szPage);
}
szPage, pCache->szExtra + ROUND8(sizeof(PgHdr)),
pCache->bPurgeable
);
- if( pNew==0 ) return SQLITE_NOMEM;
+ if( pNew==0 ) return SQLITE_NOMEM_BKPT;
sqlite3GlobalConfig.pcache2.xCachesize(pNew, numberOfCachePages(pCache));
if( pCache->pCache ){
sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache);
}
pCache->pCache = pNew;
pCache->szPage = szPage;
+ pcacheTrace(("%p.PAGESIZE %d\n",pCache,szPage));
}
return SQLITE_OK;
}
int createFlag /* If true, create page if it does not exist already */
){
int eCreate;
+ sqlite3_pcache_page *pRes;
assert( pCache!=0 );
assert( pCache->pCache!=0 );
assert( createFlag==3 || createFlag==0 );
- assert( pgno>0 );
+ assert( pCache->eCreate==((pCache->bPurgeable && pCache->pDirty) ? 1 : 2) );
/* eCreate defines what to do if the page does not exist.
** 0 Do not allocate a new page. (createFlag==0)
assert( eCreate==0 || eCreate==1 || eCreate==2 );
assert( createFlag==0 || pCache->eCreate==eCreate );
assert( createFlag==0 || eCreate==1+(!pCache->bPurgeable||!pCache->pDirty) );
- return sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate);
+ pRes = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate);
+ pcacheTrace(("%p.FETCH %d%s (result: %p)\n",pCache,pgno,
+ createFlag?" create":"",pRes));
+ return pRes;
}
/*
** If the sqlite3PcacheFetch() routine is unable to allocate a new
-** page because new clean pages are available for reuse and the cache
+** page because no clean pages are available for reuse and the cache
** size limit has been reached, then this routine can be invoked to
** try harder to allocate a page. This routine might invoke the stress
** callback to spill dirty pages to the journal. It will then try to
PgHdr *pPg;
if( pCache->eCreate==2 ) return 0;
-
- /* Find a dirty page to write-out and recycle. First try to find a
- ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC
- ** cleared), but if that is not possible settle for any other
- ** unreferenced dirty page.
- */
- for(pPg=pCache->pSynced;
- pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC));
- pPg=pPg->pDirtyPrev
- );
- pCache->pSynced = pPg;
- if( !pPg ){
- for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev);
- }
- if( pPg ){
- int rc;
+ if( sqlite3PcachePagecount(pCache)>pCache->szSpill ){
+ /* Find a dirty page to write-out and recycle. First try to find a
+ ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC
+ ** cleared), but if that is not possible settle for any other
+ ** unreferenced dirty page.
+ **
+ ** If the LRU page in the dirty list that has a clear PGHDR_NEED_SYNC
+ ** flag is currently referenced, then the following may leave pSynced
+ ** set incorrectly (pointing to other than the LRU page with NEED_SYNC
+ ** cleared). This is Ok, as pSynced is just an optimization. */
+ for(pPg=pCache->pSynced;
+ pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC));
+ pPg=pPg->pDirtyPrev
+ );
+ pCache->pSynced = pPg;
+ if( !pPg ){
+ for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev);
+ }
+ if( pPg ){
+ int rc;
#ifdef SQLITE_LOG_CACHE_SPILL
- sqlite3_log(SQLITE_FULL,
- "spill page %d making room for %d - cache used: %d/%d",
- pPg->pgno, pgno,
- sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache),
+ sqlite3_log(SQLITE_FULL,
+ "spill page %d making room for %d - cache used: %d/%d",
+ pPg->pgno, pgno,
+ sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache),
numberOfCachePages(pCache));
#endif
- rc = pCache->xStress(pCache->pStress, pPg);
- if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){
- return rc;
+ pcacheTrace(("%p.SPILL %d\n",pCache,pPg->pgno));
+ rc = pCache->xStress(pCache->pStress, pPg);
+ pcacheDump(pCache);
+ if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){
+ return rc;
+ }
}
}
*ppPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2);
- return *ppPage==0 ? SQLITE_NOMEM : SQLITE_OK;
+ return *ppPage==0 ? SQLITE_NOMEM_BKPT : SQLITE_OK;
}
/*
assert( pPage!=0 );
pPgHdr = (PgHdr*)pPage->pExtra;
assert( pPgHdr->pPage==0 );
- memset(pPgHdr, 0, sizeof(PgHdr));
+ memset(&pPgHdr->pDirty, 0, sizeof(PgHdr) - offsetof(PgHdr,pDirty));
pPgHdr->pPage = pPage;
pPgHdr->pData = pPage->pBuf;
pPgHdr->pExtra = (void *)&pPgHdr[1];
- memset(pPgHdr->pExtra, 0, pCache->szExtra);
+ memset(pPgHdr->pExtra, 0, 8);
pPgHdr->pCache = pCache;
pPgHdr->pgno = pgno;
pPgHdr->flags = PGHDR_CLEAN;
}
pCache->nRefSum++;
pPgHdr->nRef++;
+ assert( sqlite3PcachePageSanity(pPgHdr) );
return pPgHdr;
}
if( (--p->nRef)==0 ){
if( p->flags&PGHDR_CLEAN ){
pcacheUnpin(p);
- }else if( p->pDirtyPrev!=0 ){
- /* Move the page to the head of the dirty list. */
+ }else{
pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT);
}
}
*/
SQLITE_PRIVATE void sqlite3PcacheRef(PgHdr *p){
assert(p->nRef>0);
+ assert( sqlite3PcachePageSanity(p) );
p->nRef++;
p->pCache->nRefSum++;
}
*/
SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr *p){
assert( p->nRef==1 );
+ assert( sqlite3PcachePageSanity(p) );
if( p->flags&PGHDR_DIRTY ){
pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE);
}
*/
SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr *p){
assert( p->nRef>0 );
- if( p->flags & (PGHDR_CLEAN|PGHDR_DONT_WRITE) ){
+ assert( sqlite3PcachePageSanity(p) );
+ if( p->flags & (PGHDR_CLEAN|PGHDR_DONT_WRITE) ){ /*OPTIMIZATION-IF-FALSE*/
p->flags &= ~PGHDR_DONT_WRITE;
if( p->flags & PGHDR_CLEAN ){
p->flags ^= (PGHDR_DIRTY|PGHDR_CLEAN);
+ pcacheTrace(("%p.DIRTY %d\n",p->pCache,p->pgno));
assert( (p->flags & (PGHDR_DIRTY|PGHDR_CLEAN))==PGHDR_DIRTY );
pcacheManageDirtyList(p, PCACHE_DIRTYLIST_ADD);
}
+ assert( sqlite3PcachePageSanity(p) );
}
}
** make it so.
*/
SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr *p){
- if( (p->flags & PGHDR_DIRTY) ){
- assert( (p->flags & PGHDR_CLEAN)==0 );
- pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE);
- p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE);
- p->flags |= PGHDR_CLEAN;
- if( p->nRef==0 ){
- pcacheUnpin(p);
- }
+ assert( sqlite3PcachePageSanity(p) );
+ assert( (p->flags & PGHDR_DIRTY)!=0 );
+ assert( (p->flags & PGHDR_CLEAN)==0 );
+ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE);
+ p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE);
+ p->flags |= PGHDR_CLEAN;
+ pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno));
+ assert( sqlite3PcachePageSanity(p) );
+ if( p->nRef==0 ){
+ pcacheUnpin(p);
}
}
*/
SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache *pCache){
PgHdr *p;
+ pcacheTrace(("%p.CLEAN-ALL\n",pCache));
while( (p = pCache->pDirty)!=0 ){
sqlite3PcacheMakeClean(p);
}
}
+/*
+** Clear the PGHDR_NEED_SYNC and PGHDR_WRITEABLE flag from all dirty pages.
+*/
+SQLITE_PRIVATE void sqlite3PcacheClearWritable(PCache *pCache){
+ PgHdr *p;
+ pcacheTrace(("%p.CLEAR-WRITEABLE\n",pCache));
+ for(p=pCache->pDirty; p; p=p->pDirtyNext){
+ p->flags &= ~(PGHDR_NEED_SYNC|PGHDR_WRITEABLE);
+ }
+ pCache->pSynced = pCache->pDirtyTail;
+}
+
/*
** Clear the PGHDR_NEED_SYNC flag from all dirty pages.
*/
PCache *pCache = p->pCache;
assert( p->nRef>0 );
assert( newPgno>0 );
+ assert( sqlite3PcachePageSanity(p) );
+ pcacheTrace(("%p.MOVE %d -> %d\n",pCache,p->pgno,newPgno));
sqlite3GlobalConfig.pcache2.xRekey(pCache->pCache, p->pPage, p->pgno,newPgno);
p->pgno = newPgno;
if( (p->flags&PGHDR_DIRTY) && (p->flags&PGHDR_NEED_SYNC) ){
if( pCache->pCache ){
PgHdr *p;
PgHdr *pNext;
+ pcacheTrace(("%p.TRUNCATE %d\n",pCache,pgno));
for(p=pCache->pDirty; p; p=pNext){
pNext = p->pDirtyNext;
/* This routine never gets call with a positive pgno except right
** it must be that pgno==0.
*/
assert( p->pgno>0 );
- if( ALWAYS(p->pgno>pgno) ){
+ if( p->pgno>pgno ){
assert( p->flags&PGHDR_DIRTY );
sqlite3PcacheMakeClean(p);
}
*/
SQLITE_PRIVATE void sqlite3PcacheClose(PCache *pCache){
assert( pCache->pCache!=0 );
+ pcacheTrace(("%p.CLOSE\n",pCache));
sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache);
}
/*
** Merge two lists of pages connected by pDirty and in pgno order.
-** Do not both fixing the pDirtyPrev pointers.
+** Do not bother fixing the pDirtyPrev pointers.
*/
static PgHdr *pcacheMergeDirtyList(PgHdr *pA, PgHdr *pB){
PgHdr result, *pTail;
pTail = &result;
- while( pA && pB ){
+ assert( pA!=0 && pB!=0 );
+ for(;;){
if( pA->pgno<pB->pgno ){
pTail->pDirty = pA;
pTail = pA;
pA = pA->pDirty;
+ if( pA==0 ){
+ pTail->pDirty = pB;
+ break;
+ }
}else{
pTail->pDirty = pB;
pTail = pB;
pB = pB->pDirty;
+ if( pB==0 ){
+ pTail->pDirty = pA;
+ break;
+ }
}
}
- if( pA ){
- pTail->pDirty = pA;
- }else if( pB ){
- pTail->pDirty = pB;
- }else{
- pTail->pDirty = 0;
- }
return result.pDirty;
}
}
p = a[0];
for(i=1; i<N_SORT_BUCKET; i++){
- p = pcacheMergeDirtyList(p, a[i]);
+ if( a[i]==0 ) continue;
+ p = p ? pcacheMergeDirtyList(p, a[i]) : a[i];
}
return p;
}
numberOfCachePages(pCache));
}
+/*
+** Set the suggested cache-spill value. Make no changes if if the
+** argument is zero. Return the effective cache-spill size, which will
+** be the larger of the szSpill and szCache.
+*/
+SQLITE_PRIVATE int sqlite3PcacheSetSpillsize(PCache *p, int mxPage){
+ int res;
+ assert( p->pCache!=0 );
+ if( mxPage ){
+ if( mxPage<0 ){
+ mxPage = (int)((-1024*(i64)mxPage)/(p->szPage+p->szExtra));
+ }
+ p->szSpill = mxPage;
+ }
+ res = numberOfCachePages(p);
+ if( res<p->szSpill ) res = p->szSpill;
+ return res;
+}
+
/*
** Free up as much memory as possible from the page cache.
*/
*/
SQLITE_PRIVATE int sqlite3HeaderSizePcache(void){ return ROUND8(sizeof(PgHdr)); }
+/*
+** Return the number of dirty pages currently in the cache, as a percentage
+** of the configured cache size.
+*/
+SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache *pCache){
+ PgHdr *pDirty;
+ int nDirty = 0;
+ int nCache = numberOfCachePages(pCache);
+ for(pDirty=pCache->pDirty; pDirty; pDirty=pDirty->pDirtyNext) nDirty++;
+ return nCache ? (int)(((i64)nDirty * 100) / nCache) : 0;
+}
#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG)
/*
** that is allocated when the page cache is created. The size of the local
** bulk allocation can be adjusted using
**
-** sqlite3_config(SQLITE_CONFIG_PAGECACHE, 0, 0, N).
+** sqlite3_config(SQLITE_CONFIG_PAGECACHE, (void*)0, 0, N).
**
** If N is positive, then N pages worth of memory are allocated using a single
** sqlite3Malloc() call and that memory is used for the first N pages allocated.
struct PgHdr1 {
sqlite3_pcache_page page; /* Base class. Must be first. pBuf & pExtra */
unsigned int iKey; /* Key value (page number) */
- u8 isPinned; /* Page in use, not on the LRU list */
u8 isBulkLocal; /* This page from bulk local storage */
u8 isAnchor; /* This is the PGroup.lru element */
PgHdr1 *pNext; /* Next in hash table chain */
PgHdr1 *pLruPrev; /* Previous in LRU list of unpinned pages */
};
+/*
+** A page is pinned if it is no on the LRU list
+*/
+#define PAGE_IS_PINNED(p) ((p)->pLruNext==0)
+#define PAGE_IS_UNPINNED(p) ((p)->pLruNext!=0)
+
/* Each page cache (or PCache) belongs to a PGroup. A PGroup is a set
** of one or more PCaches that are able to recycle each other's unpinned
** pages when they are under memory pressure. A PGroup is an instance of
unsigned int nMaxPage; /* Sum of nMax for purgeable caches */
unsigned int nMinPage; /* Sum of nMin for purgeable caches */
unsigned int mxPinned; /* nMaxpage + 10 - nMinPage */
- unsigned int nCurrentPage; /* Number of purgeable pages allocated */
+ unsigned int nPurgeable; /* Number of purgeable pages allocated */
PgHdr1 lru; /* The beginning and end of the LRU list */
};
*/
struct PCache1 {
/* Cache configuration parameters. Page size (szPage) and the purgeable
- ** flag (bPurgeable) are set when the cache is created. nMax may be
+ ** flag (bPurgeable) and the pnPurgeable pointer are all set when the
+ ** cache is created and are never changed thereafter. nMax may be
** modified at any time by a call to the pcache1Cachesize() method.
** The PGroup mutex must be held when accessing nMax.
*/
PGroup *pGroup; /* PGroup this cache belongs to */
+ unsigned int *pnPurgeable; /* Pointer to pGroup->nPurgeable */
int szPage; /* Size of database content section */
int szExtra; /* sizeof(MemPage)+sizeof(PgHdr) */
int szAlloc; /* Total size of one pcache line */
if( pcache1.isInit ){
PgFreeslot *p;
if( pBuf==0 ) sz = n = 0;
+ if( n==0 ) sz = 0;
sz = ROUNDDOWN8(sz);
pcache1.szSlot = sz;
pcache1.nSlot = pcache1.nFreeSlot = n;
szBulk = -1024 * (i64)pcache1.nInitPage;
}
if( szBulk > pCache->szAlloc*(i64)pCache->nMax ){
- szBulk = pCache->szAlloc*pCache->nMax;
+ szBulk = pCache->szAlloc*(i64)pCache->nMax;
}
zBulk = pCache->pBulk = sqlite3Malloc( szBulk );
sqlite3EndBenignMalloc();
if( zBulk ){
int nBulk = sqlite3MallocSize(zBulk)/pCache->szAlloc;
- int i;
- for(i=0; i<nBulk; i++){
+ do{
PgHdr1 *pX = (PgHdr1*)&zBulk[pCache->szPage];
pX->page.pBuf = zBulk;
pX->page.pExtra = &pX[1];
pX->pNext = pCache->pFree;
pCache->pFree = pX;
zBulk += pCache->szAlloc;
- }
+ }while( --nBulk );
}
return pCache->pFree!=0;
}
pcache1.nFreeSlot--;
pcache1.bUnderPressure = pcache1.nFreeSlot<pcache1.nReserve;
assert( pcache1.nFreeSlot>=0 );
- sqlite3StatusSet(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
+ sqlite3StatusHighwater(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
sqlite3StatusUp(SQLITE_STATUS_PAGECACHE_USED, 1);
}
sqlite3_mutex_leave(pcache1.mutex);
if( p ){
int sz = sqlite3MallocSize(p);
sqlite3_mutex_enter(pcache1.mutex);
- sqlite3StatusSet(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
+ sqlite3StatusHighwater(SQLITE_STATUS_PAGECACHE_SIZE, nByte);
sqlite3StatusUp(SQLITE_STATUS_PAGECACHE_OVERFLOW, sz);
sqlite3_mutex_leave(pcache1.mutex);
}
** Free an allocated buffer obtained from pcache1Alloc().
*/
static void pcache1Free(void *p){
- int nFreed = 0;
if( p==0 ) return;
- if( p>=pcache1.pStart && p<pcache1.pEnd ){
+ if( SQLITE_WITHIN(p, pcache1.pStart, pcache1.pEnd) ){
PgFreeslot *pSlot;
sqlite3_mutex_enter(pcache1.mutex);
sqlite3StatusDown(SQLITE_STATUS_PAGECACHE_USED, 1);
assert( sqlite3MemdebugHasType(p, MEMTYPE_PCACHE) );
sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
#ifndef SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS
- nFreed = sqlite3MallocSize(p);
- sqlite3_mutex_enter(pcache1.mutex);
- sqlite3StatusDown(SQLITE_STATUS_PAGECACHE_OVERFLOW, nFreed);
- sqlite3_mutex_leave(pcache1.mutex);
+ {
+ int nFreed = 0;
+ nFreed = sqlite3MallocSize(p);
+ sqlite3_mutex_enter(pcache1.mutex);
+ sqlite3StatusDown(SQLITE_STATUS_PAGECACHE_OVERFLOW, nFreed);
+ sqlite3_mutex_leave(pcache1.mutex);
+ }
#endif
sqlite3_free(p);
}
p->isBulkLocal = 0;
p->isAnchor = 0;
}
- if( pCache->bPurgeable ){
- pCache->pGroup->nCurrentPage++;
- }
+ (*pCache->pnPurgeable)++;
return p;
}
sqlite3_free(p);
#endif
}
- if( pCache->bPurgeable ){
- pCache->pGroup->nCurrentPage--;
- }
+ (*pCache->pnPurgeable)--;
}
/*
** The PGroup mutex must be held when this function is called.
*/
static PgHdr1 *pcache1PinPage(PgHdr1 *pPage){
- PCache1 *pCache;
-
assert( pPage!=0 );
- assert( pPage->isPinned==0 );
- pCache = pPage->pCache;
+ assert( PAGE_IS_UNPINNED(pPage) );
assert( pPage->pLruNext );
assert( pPage->pLruPrev );
- assert( sqlite3_mutex_held(pCache->pGroup->mutex) );
+ assert( sqlite3_mutex_held(pPage->pCache->pGroup->mutex) );
pPage->pLruPrev->pLruNext = pPage->pLruNext;
pPage->pLruNext->pLruPrev = pPage->pLruPrev;
pPage->pLruNext = 0;
pPage->pLruPrev = 0;
- pPage->isPinned = 1;
assert( pPage->isAnchor==0 );
- assert( pCache->pGroup->lru.isAnchor==1 );
- pCache->nRecyclable--;
+ assert( pPage->pCache->pGroup->lru.isAnchor==1 );
+ pPage->pCache->nRecyclable--;
return pPage;
}
PGroup *pGroup = pCache->pGroup;
PgHdr1 *p;
assert( sqlite3_mutex_held(pGroup->mutex) );
- while( pGroup->nCurrentPage>pGroup->nMaxPage
+ while( pGroup->nPurgeable>pGroup->nMaxPage
&& (p=pGroup->lru.pLruPrev)->isAnchor==0
){
assert( p->pCache->pGroup==pGroup );
- assert( p->isPinned==0 );
+ assert( PAGE_IS_UNPINNED(p) );
pcache1PinPage(p);
pcache1RemoveFromHash(p, 1);
}
PCache1 *pCache, /* The cache to truncate */
unsigned int iLimit /* Drop pages with this pgno or larger */
){
- TESTONLY( unsigned int nPage = 0; ) /* To assert pCache->nPage is correct */
- unsigned int h;
+ TESTONLY( int nPage = 0; ) /* To assert pCache->nPage is correct */
+ unsigned int h, iStop;
assert( sqlite3_mutex_held(pCache->pGroup->mutex) );
- for(h=0; h<pCache->nHash; h++){
- PgHdr1 **pp = &pCache->apHash[h];
+ assert( pCache->iMaxKey >= iLimit );
+ assert( pCache->nHash > 0 );
+ if( pCache->iMaxKey - iLimit < pCache->nHash ){
+ /* If we are just shaving the last few pages off the end of the
+ ** cache, then there is no point in scanning the entire hash table.
+ ** Only scan those hash slots that might contain pages that need to
+ ** be removed. */
+ h = iLimit % pCache->nHash;
+ iStop = pCache->iMaxKey % pCache->nHash;
+ TESTONLY( nPage = -10; ) /* Disable the pCache->nPage validity check */
+ }else{
+ /* This is the general case where many pages are being removed.
+ ** It is necessary to scan the entire hash table */
+ h = pCache->nHash/2;
+ iStop = h - 1;
+ }
+ for(;;){
+ PgHdr1 **pp;
PgHdr1 *pPage;
+ assert( h<pCache->nHash );
+ pp = &pCache->apHash[h];
while( (pPage = *pp)!=0 ){
if( pPage->iKey>=iLimit ){
pCache->nPage--;
*pp = pPage->pNext;
- if( !pPage->isPinned ) pcache1PinPage(pPage);
+ if( PAGE_IS_UNPINNED(pPage) ) pcache1PinPage(pPage);
pcache1FreePage(pPage);
}else{
pp = &pPage->pNext;
- TESTONLY( nPage++; )
+ TESTONLY( if( nPage>=0 ) nPage++; )
}
}
+ if( h==iStop ) break;
+ h = (h+1) % pCache->nHash;
}
- assert( pCache->nPage==nPage );
+ assert( nPage<0 || pCache->nPage==(unsigned)nPage );
}
/******************************************************************************/
#if SQLITE_THREADSAFE
if( sqlite3GlobalConfig.bCoreMutex ){
- pcache1.grp.mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_LRU);
- pcache1.mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_PMEM);
+ pcache1.grp.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_LRU);
+ pcache1.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_PMEM);
}
#endif
if( pcache1.separateCache
pCache->nMin = 10;
pGroup->nMinPage += pCache->nMin;
pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage;
+ pCache->pnPurgeable = &pGroup->nPurgeable;
+ }else{
+ static unsigned int dummyCurrentPage;
+ pCache->pnPurgeable = &dummyCurrentPage;
}
pcache1LeaveMutex(pGroup);
if( pCache->nHash==0 ){
){
PCache1 *pOther;
pPage = pGroup->lru.pLruPrev;
- assert( pPage->isPinned==0 );
+ assert( PAGE_IS_UNPINNED(pPage) );
pcache1RemoveFromHash(pPage, 0);
pcache1PinPage(pPage);
pOther = pPage->pCache;
pcache1FreePage(pPage);
pPage = 0;
}else{
- pGroup->nCurrentPage -= (pOther->bPurgeable - pCache->bPurgeable);
+ pGroup->nPurgeable -= (pOther->bPurgeable - pCache->bPurgeable);
}
}
pPage->pCache = pCache;
pPage->pLruPrev = 0;
pPage->pLruNext = 0;
- pPage->isPinned = 1;
*(void **)pPage->page.pExtra = 0;
pCache->apHash[h] = pPage;
if( iKey>pCache->iMaxKey ){
** Otherwise (page not in hash and createFlag!=0) continue with
** subsequent steps to try to create the page. */
if( pPage ){
- if( !pPage->isPinned ){
+ if( PAGE_IS_UNPINNED(pPage) ){
return pcache1PinPage(pPage);
}else{
return pPage;
** part of the PGroup LRU list.
*/
assert( pPage->pLruPrev==0 && pPage->pLruNext==0 );
- assert( pPage->isPinned==1 );
+ assert( PAGE_IS_PINNED(pPage) );
- if( reuseUnlikely || pGroup->nCurrentPage>pGroup->nMaxPage ){
+ if( reuseUnlikely || pGroup->nPurgeable>pGroup->nMaxPage ){
pcache1RemoveFromHash(pPage, 1);
}else{
/* Add the page to the PGroup LRU list. */
(pPage->pLruNext = *ppFirst)->pLruPrev = pPage;
*ppFirst = pPage;
pCache->nRecyclable++;
- pPage->isPinned = 0;
}
pcache1LeaveMutex(pCache->pGroup);
PGroup *pGroup = pCache->pGroup;
assert( pCache->bPurgeable || (pCache->nMax==0 && pCache->nMin==0) );
pcache1EnterMutex(pGroup);
- pcache1TruncateUnsafe(pCache, 0);
+ if( pCache->nPage ) pcache1TruncateUnsafe(pCache, 0);
assert( pGroup->nMaxPage >= pCache->nMax );
pGroup->nMaxPage -= pCache->nMax;
assert( pGroup->nMinPage >= pCache->nMin );
int nFree = 0;
assert( sqlite3_mutex_notheld(pcache1.grp.mutex) );
assert( sqlite3_mutex_notheld(pcache1.mutex) );
- if( sqlite3GlobalConfig.nPage==0 ){
+ if( sqlite3GlobalConfig.pPage==0 ){
PgHdr1 *p;
pcache1EnterMutex(&pcache1.grp);
while( (nReq<0 || nFree<nReq)
#ifdef SQLITE_PCACHE_SEPARATE_HEADER
nFree += sqlite3MemSize(p);
#endif
- assert( p->isPinned==0 );
+ assert( PAGE_IS_UNPINNED(p) );
pcache1PinPage(p);
pcache1RemoveFromHash(p, 1);
}
PgHdr1 *p;
int nRecyclable = 0;
for(p=pcache1.grp.lru.pLruNext; p && !p->isAnchor; p=p->pLruNext){
- assert( p->isPinned==0 );
+ assert( PAGE_IS_UNPINNED(p) );
nRecyclable++;
}
- *pnCurrent = pcache1.grp.nCurrentPage;
+ *pnCurrent = pcache1.grp.nPurgeable;
*pnMax = (int)pcache1.grp.nMaxPage;
*pnMin = (int)pcache1.grp.nMinPage;
*pnRecyclable = nRecyclable;
** of the first SMALLEST is O(NlogN). Second and subsequent SMALLEST
** primitives are constant time. The cost of DESTROY is O(N).
**
-** There is an added cost of O(N) when switching between TEST and
-** SMALLEST primitives.
+** TEST and SMALLEST may not be used by the same RowSet. This used to
+** be possible, but the feature was not used, so it was removed in order
+** to simplify the code.
*/
/* #include "sqliteInt.h" */
*/
static struct RowSetEntry *rowSetEntryAlloc(RowSet *p){
assert( p!=0 );
- if( p->nFresh==0 ){
+ if( p->nFresh==0 ){ /*OPTIMIZATION-IF-FALSE*/
+ /* We could allocate a fresh RowSetEntry each time one is needed, but it
+ ** is more efficient to pull a preallocated entry from the pool */
struct RowSetChunk *pNew;
- pNew = sqlite3DbMallocRaw(p->db, sizeof(*pNew));
+ pNew = sqlite3DbMallocRawNN(p->db, sizeof(*pNew));
if( pNew==0 ){
return 0;
}
pEntry->pRight = 0;
pLast = p->pLast;
if( pLast ){
- if( (p->rsFlags & ROWSET_SORTED)!=0 && rowid<=pLast->v ){
+ if( rowid<=pLast->v ){ /*OPTIMIZATION-IF-FALSE*/
+ /* Avoid unnecessary sorts by preserving the ROWSET_SORTED flags
+ ** where possible */
p->rsFlags &= ~ROWSET_SORTED;
}
pLast->pRight = pEntry;
struct RowSetEntry *pTail;
pTail = &head;
- while( pA && pB ){
+ assert( pA!=0 && pB!=0 );
+ for(;;){
assert( pA->pRight==0 || pA->v<=pA->pRight->v );
assert( pB->pRight==0 || pB->v<=pB->pRight->v );
- if( pA->v<pB->v ){
- pTail->pRight = pA;
+ if( pA->v<=pB->v ){
+ if( pA->v<pB->v ) pTail = pTail->pRight = pA;
pA = pA->pRight;
- pTail = pTail->pRight;
- }else if( pB->v<pA->v ){
- pTail->pRight = pB;
- pB = pB->pRight;
- pTail = pTail->pRight;
+ if( pA==0 ){
+ pTail->pRight = pB;
+ break;
+ }
}else{
- pA = pA->pRight;
+ pTail = pTail->pRight = pB;
+ pB = pB->pRight;
+ if( pB==0 ){
+ pTail->pRight = pA;
+ break;
+ }
}
}
- if( pA ){
- assert( pA->pRight==0 || pA->v<=pA->pRight->v );
- pTail->pRight = pA;
- }else{
- assert( pB==0 || pB->pRight==0 || pB->v<=pB->pRight->v );
- pTail->pRight = pB;
- }
return head.pRight;
}
aBucket[i] = pIn;
pIn = pNext;
}
- pIn = 0;
- for(i=0; i<sizeof(aBucket)/sizeof(aBucket[0]); i++){
- pIn = rowSetEntryMerge(pIn, aBucket[i]);
+ pIn = aBucket[0];
+ for(i=1; i<sizeof(aBucket)/sizeof(aBucket[0]); i++){
+ if( aBucket[i]==0 ) continue;
+ pIn = pIn ? rowSetEntryMerge(pIn, aBucket[i]) : aBucket[i];
}
return pIn;
}
){
struct RowSetEntry *p; /* Root of the new tree */
struct RowSetEntry *pLeft; /* Left subtree */
- if( *ppList==0 ){
- return 0;
- }
- if( iDepth==1 ){
+ if( *ppList==0 ){ /*OPTIMIZATION-IF-TRUE*/
+ /* Prevent unnecessary deep recursion when we run out of entries */
+ return 0;
+ }
+ if( iDepth>1 ){ /*OPTIMIZATION-IF-TRUE*/
+ /* This branch causes a *balanced* tree to be generated. A valid tree
+ ** is still generated without this branch, but the tree is wildly
+ ** unbalanced and inefficient. */
+ pLeft = rowSetNDeepTree(ppList, iDepth-1);
+ p = *ppList;
+ if( p==0 ){ /*OPTIMIZATION-IF-FALSE*/
+ /* It is safe to always return here, but the resulting tree
+ ** would be unbalanced */
+ return pLeft;
+ }
+ p->pLeft = pLeft;
+ *ppList = p->pRight;
+ p->pRight = rowSetNDeepTree(ppList, iDepth-1);
+ }else{
p = *ppList;
*ppList = p->pRight;
p->pLeft = p->pRight = 0;
- return p;
- }
- pLeft = rowSetNDeepTree(ppList, iDepth-1);
- p = *ppList;
- if( p==0 ){
- return pLeft;
}
- p->pLeft = pLeft;
- *ppList = p->pRight;
- p->pRight = rowSetNDeepTree(ppList, iDepth-1);
return p;
}
return p;
}
-/*
-** Take all the entries on p->pEntry and on the trees in p->pForest and
-** sort them all together into one big ordered list on p->pEntry.
-**
-** This routine should only be called once in the life of a RowSet.
-*/
-static void rowSetToList(RowSet *p){
-
- /* This routine is called only once */
- assert( p!=0 && (p->rsFlags & ROWSET_NEXT)==0 );
-
- if( (p->rsFlags & ROWSET_SORTED)==0 ){
- p->pEntry = rowSetEntrySort(p->pEntry);
- }
-
- /* While this module could theoretically support it, sqlite3RowSetNext()
- ** is never called after sqlite3RowSetText() for the same RowSet. So
- ** there is never a forest to deal with. Should this change, simply
- ** remove the assert() and the #if 0. */
- assert( p->pForest==0 );
-#if 0
- while( p->pForest ){
- struct RowSetEntry *pTree = p->pForest->pLeft;
- if( pTree ){
- struct RowSetEntry *pHead, *pTail;
- rowSetTreeToList(pTree, &pHead, &pTail);
- p->pEntry = rowSetEntryMerge(p->pEntry, pHead);
- }
- p->pForest = p->pForest->pRight;
- }
-#endif
- p->rsFlags |= ROWSET_NEXT; /* Verify this routine is never called again */
-}
-
/*
** Extract the smallest element from the RowSet.
** Write the element into *pRowid. Return 1 on success. Return
** 0 if the RowSet is already empty.
**
** After this routine has been called, the sqlite3RowSetInsert()
-** routine may not be called again.
+** routine may not be called again.
+**
+** This routine may not be called after sqlite3RowSetTest() has
+** been used. Older versions of RowSet allowed that, but as the
+** capability was not used by the code generator, it was removed
+** for code economy.
*/
SQLITE_PRIVATE int sqlite3RowSetNext(RowSet *p, i64 *pRowid){
assert( p!=0 );
+ assert( p->pForest==0 ); /* Cannot be used with sqlite3RowSetText() */
/* Merge the forest into a single sorted list on first call */
- if( (p->rsFlags & ROWSET_NEXT)==0 ) rowSetToList(p);
+ if( (p->rsFlags & ROWSET_NEXT)==0 ){ /*OPTIMIZATION-IF-FALSE*/
+ if( (p->rsFlags & ROWSET_SORTED)==0 ){ /*OPTIMIZATION-IF-FALSE*/
+ p->pEntry = rowSetEntrySort(p->pEntry);
+ }
+ p->rsFlags |= ROWSET_SORTED|ROWSET_NEXT;
+ }
/* Return the next entry on the list */
if( p->pEntry ){
*pRowid = p->pEntry->v;
p->pEntry = p->pEntry->pRight;
- if( p->pEntry==0 ){
+ if( p->pEntry==0 ){ /*OPTIMIZATION-IF-TRUE*/
+ /* Free memory immediately, rather than waiting on sqlite3_finalize() */
sqlite3RowSetClear(p);
}
return 1;
/* This routine is never called after sqlite3RowSetNext() */
assert( pRowSet!=0 && (pRowSet->rsFlags & ROWSET_NEXT)==0 );
- /* Sort entries into the forest on the first test of a new batch
+ /* Sort entries into the forest on the first test of a new batch.
+ ** To save unnecessary work, only do this when the batch number changes.
*/
- if( iBatch!=pRowSet->iBatch ){
+ if( iBatch!=pRowSet->iBatch ){ /*OPTIMIZATION-IF-FALSE*/
p = pRowSet->pEntry;
if( p ){
struct RowSetEntry **ppPrevTree = &pRowSet->pForest;
- if( (pRowSet->rsFlags & ROWSET_SORTED)==0 ){
+ if( (pRowSet->rsFlags & ROWSET_SORTED)==0 ){ /*OPTIMIZATION-IF-FALSE*/
+ /* Only sort the current set of entiries if they need it */
p = rowSetEntrySort(p);
}
for(pTree = pRowSet->pForest; pTree; pTree=pTree->pRight){
** the implementation of each function in log.c for further details.
*/
-#ifndef _WAL_H_
-#define _WAL_H_
+#ifndef SQLITE_WAL_H
+#define SQLITE_WAL_H
/* #include "sqliteInt.h" */
-/* Additional values that can be added to the sync_flags argument of
-** sqlite3WalFrames():
+/* Macros for extracting appropriate sync flags for either transaction
+** commits (WAL_SYNC_FLAGS(X)) or for checkpoint ops (CKPT_SYNC_FLAGS(X)):
*/
-#define WAL_SYNC_TRANSACTIONS 0x20 /* Sync at the end of each transaction */
-#define SQLITE_SYNC_MASK 0x13 /* Mask off the SQLITE_SYNC_* values */
+#define WAL_SYNC_FLAGS(X) ((X)&0x03)
+#define CKPT_SYNC_FLAGS(X) (((X)>>2)&0x03)
#ifdef SQLITE_OMIT_WAL
# define sqlite3WalOpen(x,y,z) 0
# define sqlite3WalLimit(x,y)
-# define sqlite3WalClose(w,x,y,z) 0
+# define sqlite3WalClose(v,w,x,y,z) 0
# define sqlite3WalBeginReadTransaction(y,z) 0
# define sqlite3WalEndReadTransaction(z)
# define sqlite3WalDbsize(y) 0
# define sqlite3WalSavepoint(y,z)
# define sqlite3WalSavepointUndo(y,z) 0
# define sqlite3WalFrames(u,v,w,x,y,z) 0
-# define sqlite3WalCheckpoint(r,s,t,u,v,w,x,y,z) 0
+# define sqlite3WalCheckpoint(q,r,s,t,u,v,w,x,y,z) 0
# define sqlite3WalCallback(z) 0
# define sqlite3WalExclusiveMode(y,z) 0
# define sqlite3WalHeapMemory(z) 0
# define sqlite3WalFramesize(z) 0
# define sqlite3WalFindFrame(x,y,z) 0
+# define sqlite3WalFile(x) 0
#else
#define WAL_SAVEPOINT_NDATA 4
/* Open and close a connection to a write-ahead log. */
SQLITE_PRIVATE int sqlite3WalOpen(sqlite3_vfs*, sqlite3_file*, const char *, int, i64, Wal**);
-SQLITE_PRIVATE int sqlite3WalClose(Wal *pWal, int sync_flags, int, u8 *);
+SQLITE_PRIVATE int sqlite3WalClose(Wal *pWal, sqlite3*, int sync_flags, int, u8 *);
/* Set the limiting size of a WAL file. */
SQLITE_PRIVATE void sqlite3WalLimit(Wal*, i64);
/* Copy pages from the log to the database file */
SQLITE_PRIVATE int sqlite3WalCheckpoint(
Wal *pWal, /* Write-ahead log connection */
+ sqlite3 *db, /* Check this handle's interrupt flag */
int eMode, /* One of PASSIVE, FULL and RESTART */
int (*xBusy)(void*), /* Function to call when busy */
void *pBusyArg, /* Context argument for xBusyHandler */
*/
SQLITE_PRIVATE int sqlite3WalHeapMemory(Wal *pWal);
+#ifdef SQLITE_ENABLE_SNAPSHOT
+SQLITE_PRIVATE int sqlite3WalSnapshotGet(Wal *pWal, sqlite3_snapshot **ppSnapshot);
+SQLITE_PRIVATE void sqlite3WalSnapshotOpen(Wal *pWal, sqlite3_snapshot *pSnapshot);
+SQLITE_PRIVATE int sqlite3WalSnapshotRecover(Wal *pWal);
+#endif
+
#ifdef SQLITE_ENABLE_ZIPVFS
/* If the WAL file is not empty, return the number of bytes of content
** stored in each frame (i.e. the db page-size when the WAL was created).
SQLITE_PRIVATE int sqlite3WalFramesize(Wal *pWal);
#endif
+/* Return the sqlite3_file object for the WAL file */
+SQLITE_PRIVATE sqlite3_file *sqlite3WalFile(Wal *pWal);
+
#endif /* ifndef SQLITE_OMIT_WAL */
-#endif /* _WAL_H_ */
+#endif /* SQLITE_WAL_H */
/************** End of wal.h *************************************************/
/************** Continuing where we left off in pager.c **********************/
** associated file-descriptor is returned. FILEHANDLEID() takes an sqlite3_file
** struct as its argument.
*/
-#define PAGERID(p) ((int)(p->fd))
-#define FILEHANDLEID(fd) ((int)fd)
+#define PAGERID(p) (SQLITE_PTR_TO_INT(p->fd))
+#define FILEHANDLEID(fd) (SQLITE_PTR_TO_INT(fd))
/*
** The Pager.eState variable stores the current 'state' of a pager. A
*/
#define MAX_SECTOR_SIZE 0x10000
+
/*
** An instance of the following structure is allocated for each active
** savepoint and statement transaction in the system. All such structures
** is set to zero in all other states. In PAGER_ERROR state, Pager.errCode
** is always set to SQLITE_FULL, SQLITE_IOERR or one of the SQLITE_IOERR_XXX
** sub-codes.
+**
+** syncFlags, walSyncFlags
+**
+** syncFlags is either SQLITE_SYNC_NORMAL (0x02) or SQLITE_SYNC_FULL (0x03).
+** syncFlags is used for rollback mode. walSyncFlags is used for WAL mode
+** and contains the flags used to sync the checkpoint operations in the
+** lower two bits, and sync flags used for transaction commits in the WAL
+** file in bits 0x04 and 0x08. In other words, to get the correct sync flags
+** for checkpoint operations, use (walSyncFlags&0x03) and to get the correct
+** sync flags for transaction commit, use ((walSyncFlags>>2)&0x03). Note
+** that with synchronous=NORMAL in WAL mode, transaction commit is not synced
+** meaning that the 0x04 and 0x08 bits are both zero.
*/
struct Pager {
sqlite3_vfs *pVfs; /* OS functions to use for IO */
u8 useJournal; /* Use a rollback journal on this file */
u8 noSync; /* Do not sync the journal if true */
u8 fullSync; /* Do extra syncs of the journal for robustness */
- u8 ckptSyncFlags; /* SYNC_NORMAL or SYNC_FULL for checkpoint */
- u8 walSyncFlags; /* SYNC_NORMAL or SYNC_FULL for wal writes */
+ u8 extraSync; /* sync directory after journal delete */
u8 syncFlags; /* SYNC_NORMAL or SYNC_FULL otherwise */
+ u8 walSyncFlags; /* See description above */
u8 tempFile; /* zFilename is a temporary or immutable file */
u8 noLock; /* Do not lock (except in WAL mode) */
u8 readOnly; /* True for a read-only database */
char *zJournal; /* Name of the journal file */
int (*xBusyHandler)(void*); /* Function to call when busy */
void *pBusyHandlerArg; /* Context argument for xBusyHandler */
- int aStat[3]; /* Total cache hits, misses and writes */
+ int aStat[4]; /* Total cache hits, misses, writes, spills */
#ifdef SQLITE_TEST
int nRead; /* Database pages read */
#endif
void (*xReiniter)(DbPage*); /* Call this routine when reloading pages */
+ int (*xGet)(Pager*,Pgno,DbPage**,int); /* Routine to fetch a patch */
#ifdef SQLITE_HAS_CODEC
void *(*xCodec)(void*,void*,Pgno,int); /* Routine for en/decoding data */
void (*xCodecSizeChng)(void*,int,int); /* Notify of page size changes */
#define PAGER_STAT_HIT 0
#define PAGER_STAT_MISS 1
#define PAGER_STAT_WRITE 2
+#define PAGER_STAT_SPILL 3
/*
** The following global variables hold counters used for
#define isOpen(pFd) ((pFd)->pMethods!=0)
/*
-** Return true if this pager uses a write-ahead log instead of the usual
-** rollback journal. Otherwise false.
+** Return true if this pager uses a write-ahead log to read page pgno.
+** Return false if the pager reads pgno directly from the database.
*/
-#ifndef SQLITE_OMIT_WAL
-static int pagerUseWal(Pager *pPager){
- return (pPager->pWal!=0);
+#if !defined(SQLITE_OMIT_WAL) && defined(SQLITE_DIRECT_OVERFLOW_READ)
+SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager, Pgno pgno){
+ u32 iRead = 0;
+ int rc;
+ if( pPager->pWal==0 ) return 0;
+ rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iRead);
+ return rc || iRead;
}
+#endif
+#ifndef SQLITE_OMIT_WAL
+# define pagerUseWal(x) ((x)->pWal!=0)
#else
# define pagerUseWal(x) 0
# define pagerRollbackWal(x) 0
** state.
*/
if( MEMDB ){
+ assert( !isOpen(p->fd) );
assert( p->noSync );
assert( p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_MEMORY
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
assert( pPager->dbOrigSize<=pPager->dbHintSize );
break;
assert( isOpen(p->jfd)
|| p->journalMode==PAGER_JOURNALMODE_OFF
|| p->journalMode==PAGER_JOURNALMODE_WAL
+ || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
);
break;
** back to OPEN state.
*/
assert( pPager->errCode!=SQLITE_OK );
- assert( sqlite3PcacheRefCount(pPager->pPCache)>0 );
+ assert( sqlite3PcacheRefCount(pPager->pPCache)>0 || pPager->tempFile );
break;
}
}
#endif
+/* Forward references to the various page getters */
+static int getPageNormal(Pager*,Pgno,DbPage**,int);
+static int getPageError(Pager*,Pgno,DbPage**,int);
+#if SQLITE_MAX_MMAP_SIZE>0
+static int getPageMMap(Pager*,Pgno,DbPage**,int);
+#endif
+
+/*
+** Set the Pager.xGet method for the appropriate routine used to fetch
+** content from the pager.
+*/
+static void setGetterMethod(Pager *pPager){
+ if( pPager->errCode ){
+ pPager->xGet = getPageError;
+#if SQLITE_MAX_MMAP_SIZE>0
+ }else if( USEFETCH(pPager)
+#ifdef SQLITE_HAS_CODEC
+ && pPager->xCodec==0
+#endif
+ ){
+ pPager->xGet = getPageMMap;
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
+ }else{
+ pPager->xGet = getPageNormal;
+ }
+}
+
/*
** Return true if it is necessary to write page *pPg into the sub-journal.
** A page needs to be written into the sub-journal if there exists one
}
/*
-** This function determines whether or not the atomic-write optimization
-** can be used with this pager. The optimization can be used if:
+** This function determines whether or not the atomic-write or
+** atomic-batch-write optimizations can be used with this pager. The
+** atomic-write optimization can be used if:
**
** (a) the value returned by OsDeviceCharacteristics() indicates that
** a database page may be written atomically, and
** (b) the value returned by OsSectorSize() is less than or equal
** to the page size.
**
-** The optimization is also always enabled for temporary files. It is
-** an error to call this function if pPager is opened on an in-memory
-** database.
+** If it can be used, then the value returned is the size of the journal
+** file when it contains rollback data for exactly one page.
**
-** If the optimization cannot be used, 0 is returned. If it can be used,
-** then the value returned is the size of the journal file when it
-** contains rollback data for exactly one page.
+** The atomic-batch-write optimization can be used if OsDeviceCharacteristics()
+** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is
+** returned in this case.
+**
+** If neither optimization can be used, 0 is returned.
*/
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
static int jrnlBufferSize(Pager *pPager){
assert( !MEMDB );
- if( !pPager->tempFile ){
- int dc; /* Device characteristics */
- int nSector; /* Sector size */
- int szPage; /* Page size */
- assert( isOpen(pPager->fd) );
- dc = sqlite3OsDeviceCharacteristics(pPager->fd);
- nSector = pPager->sectorSize;
- szPage = pPager->pageSize;
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ int dc; /* Device characteristics */
+
+ assert( isOpen(pPager->fd) );
+ dc = sqlite3OsDeviceCharacteristics(pPager->fd);
+#else
+ UNUSED_PARAMETER(pPager);
+#endif
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( pPager->dbSize>0 && (dc&SQLITE_IOCAP_BATCH_ATOMIC) ){
+ return -1;
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ {
+ int nSector = pPager->sectorSize;
+ int szPage = pPager->pageSize;
assert(SQLITE_IOCAP_ATOMIC512==(512>>8));
assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8));
}
return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager);
-}
#endif
+ return 0;
+}
+
/*
** If SQLITE_CHECK_PAGES is defined then we do some sanity checking
** on the cache using a hash function. This is used for testing
|| szJ<16
|| SQLITE_OK!=(rc = read32bits(pJrnl, szJ-16, &len))
|| len>=nMaster
+ || len>szJ-16
|| len==0
|| SQLITE_OK!=(rc = read32bits(pJrnl, szJ-12, &cksum))
|| SQLITE_OK!=(rc = sqlite3OsRead(pJrnl, aMagic, 8, szJ-8))
static int zeroJournalHdr(Pager *pPager, int doTruncate){
int rc = SQLITE_OK; /* Return code */
assert( isOpen(pPager->jfd) );
+ assert( !sqlite3JournalIsInMemory(pPager->jfd) );
if( pPager->journalOff ){
const i64 iLimit = pPager->journalSizeLimit; /* Local cache of jsl */
for(ii=0; ii<pPager->nSavepoint; ii++){
sqlite3BitvecDestroy(pPager->aSavepoint[ii].pInSavepoint);
}
- if( !pPager->exclusiveMode || sqlite3IsMemJournal(pPager->sjfd) ){
+ if( !pPager->exclusiveMode || sqlite3JournalIsInMemory(pPager->sjfd) ){
sqlite3OsClose(pPager->sjfd);
}
sqlite3_free(pPager->aSavepoint);
** it can safely move back to PAGER_OPEN state. This happens in both
** normal and exclusive-locking mode.
*/
+ assert( pPager->errCode==SQLITE_OK || !MEMDB );
if( pPager->errCode ){
- assert( !MEMDB );
- pager_reset(pPager);
- pPager->changeCountDone = pPager->tempFile;
- pPager->eState = PAGER_OPEN;
- pPager->errCode = SQLITE_OK;
+ if( pPager->tempFile==0 ){
+ pager_reset(pPager);
+ pPager->changeCountDone = 0;
+ pPager->eState = PAGER_OPEN;
+ }else{
+ pPager->eState = (isOpen(pPager->jfd) ? PAGER_OPEN : PAGER_READER);
+ }
if( USEFETCH(pPager) ) sqlite3OsUnfetch(pPager->fd, 0, 0);
+ pPager->errCode = SQLITE_OK;
+ setGetterMethod(pPager);
}
pPager->journalOff = 0;
if( rc2==SQLITE_FULL || rc2==SQLITE_IOERR ){
pPager->errCode = rc;
pPager->eState = PAGER_ERROR;
+ setGetterMethod(pPager);
}
return rc;
}
static int pager_truncate(Pager *pPager, Pgno nPage);
+/*
+** The write transaction open on pPager is being committed (bCommit==1)
+** or rolled back (bCommit==0).
+**
+** Return TRUE if and only if all dirty pages should be flushed to disk.
+**
+** Rules:
+**
+** * For non-TEMP databases, always sync to disk. This is necessary
+** for transactions to be durable.
+**
+** * Sync TEMP database only on a COMMIT (not a ROLLBACK) when the backing
+** file has been created already (via a spill on pagerStress()) and
+** when the number of dirty pages in memory exceeds 25% of the total
+** cache size.
+*/
+static int pagerFlushOnCommit(Pager *pPager, int bCommit){
+ if( pPager->tempFile==0 ) return 1;
+ if( !bCommit ) return 0;
+ if( !isOpen(pPager->fd) ) return 0;
+ return (sqlite3PCachePercentDirty(pPager->pPCache)>=25);
+}
+
/*
** This routine ends a transaction. A transaction is usually ended by
** either a COMMIT or a ROLLBACK operation. This routine may be called
}
releaseAllSavepoints(pPager);
- assert( isOpen(pPager->jfd) || pPager->pInJournal==0 );
+ assert( isOpen(pPager->jfd) || pPager->pInJournal==0
+ || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC)
+ );
if( isOpen(pPager->jfd) ){
assert( !pagerUseWal(pPager) );
/* Finalize the journal file. */
- if( sqlite3IsMemJournal(pPager->jfd) ){
- assert( pPager->journalMode==PAGER_JOURNALMODE_MEMORY );
+ if( sqlite3JournalIsInMemory(pPager->jfd) ){
+ /* assert( pPager->journalMode==PAGER_JOURNALMODE_MEMORY ); */
sqlite3OsClose(pPager->jfd);
}else if( pPager->journalMode==PAGER_JOURNALMODE_TRUNCATE ){
if( pPager->journalOff==0 ){
}else if( pPager->journalMode==PAGER_JOURNALMODE_PERSIST
|| (pPager->exclusiveMode && pPager->journalMode!=PAGER_JOURNALMODE_WAL)
){
- rc = zeroJournalHdr(pPager, hasMaster);
+ rc = zeroJournalHdr(pPager, hasMaster||pPager->tempFile);
pPager->journalOff = 0;
}else{
/* This branch may be executed with Pager.journalMode==MEMORY if
** a hot-journal was just rolled back. In this case the journal
** file should be closed and deleted. If this connection writes to
- ** the database file, it will do so using an in-memory journal.
+ ** the database file, it will do so using an in-memory journal.
*/
- int bDelete = (!pPager->tempFile && sqlite3JournalExists(pPager->jfd));
+ int bDelete = !pPager->tempFile;
+ assert( sqlite3JournalIsInMemory(pPager->jfd)==0 );
assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE
|| pPager->journalMode==PAGER_JOURNALMODE_MEMORY
|| pPager->journalMode==PAGER_JOURNALMODE_WAL
);
sqlite3OsClose(pPager->jfd);
if( bDelete ){
- rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, 0);
+ rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, pPager->extraSync);
}
}
}
sqlite3BitvecDestroy(pPager->pInJournal);
pPager->pInJournal = 0;
pPager->nRec = 0;
- sqlite3PcacheCleanAll(pPager->pPCache);
- sqlite3PcacheTruncate(pPager->pPCache, pPager->dbSize);
+ if( rc==SQLITE_OK ){
+ if( MEMDB || pagerFlushOnCommit(pPager, bCommit) ){
+ sqlite3PcacheCleanAll(pPager->pPCache);
+ }else{
+ sqlite3PcacheClearWritable(pPager->pPCache);
+ }
+ sqlite3PcacheTruncate(pPager->pPCache, pPager->dbSize);
+ }
if( pagerUseWal(pPager) ){
/* Drop the WAL write-lock, if any. Also, if the connection was in
rc = pager_truncate(pPager, pPager->dbSize);
}
- if( rc==SQLITE_OK && bCommit && isOpen(pPager->fd) ){
+ if( rc==SQLITE_OK && bCommit ){
rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_COMMIT_PHASETWO, 0);
if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
}
char *aData; /* Temporary storage for the page */
sqlite3_file *jfd; /* The file descriptor for the journal file */
int isSynced; /* True if journal page is synced */
+#ifdef SQLITE_HAS_CODEC
+ /* The jrnlEnc flag is true if Journal pages should be passed through
+ ** the codec. It is false for pure in-memory journals. */
+ const int jrnlEnc = (isMainJrnl || pPager->subjInMemory==0);
+#endif
assert( (isMainJrnl&~1)==0 ); /* isMainJrnl is 0 or 1 */
assert( (isSavepnt&~1)==0 ); /* isSavepnt is 0 or 1 */
pPg = sqlite3PagerLookup(pPager, pgno);
}
assert( pPg || !MEMDB );
- assert( pPager->eState!=PAGER_OPEN || pPg==0 );
+ assert( pPager->eState!=PAGER_OPEN || pPg==0 || pPager->tempFile );
PAGERTRACE(("PLAYBACK %d page %d hash(%08x) %s\n",
PAGERID(pPager), pgno, pager_datahash(pPager->pageSize, (u8*)aData),
(isMainJrnl?"main-journal":"sub-journal")
i64 ofst = (pgno-1)*(i64)pPager->pageSize;
testcase( !isSavepnt && pPg!=0 && (pPg->flags&PGHDR_NEED_SYNC)!=0 );
assert( !pagerUseWal(pPager) );
+
+ /* Write the data read from the journal back into the database file.
+ ** This is usually safe even for an encrypted database - as the data
+ ** was encrypted before it was written to the journal file. The exception
+ ** is if the data was just read from an in-memory sub-journal. In that
+ ** case it must be encrypted here before it is copied into the database
+ ** file. */
+#ifdef SQLITE_HAS_CODEC
+ if( !jrnlEnc ){
+ CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM_BKPT, aData);
+ rc = sqlite3OsWrite(pPager->fd, (u8 *)aData, pPager->pageSize, ofst);
+ CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM_BKPT);
+ }else
+#endif
rc = sqlite3OsWrite(pPager->fd, (u8 *)aData, pPager->pageSize, ofst);
+
if( pgno>pPager->dbFileSize ){
pPager->dbFileSize = pgno;
}
if( pPager->pBackup ){
- CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM);
+#ifdef SQLITE_HAS_CODEC
+ if( jrnlEnc ){
+ CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM_BKPT);
+ sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)aData);
+ CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM_BKPT,aData);
+ }else
+#endif
sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)aData);
- CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM, aData);
}
}else if( !isMainJrnl && pPg==0 ){
/* If this is a rollback of a savepoint and data was not written to
assert( isSavepnt );
assert( (pPager->doNotSpill & SPILLFLAG_ROLLBACK)==0 );
pPager->doNotSpill |= SPILLFLAG_ROLLBACK;
- rc = sqlite3PagerAcquire(pPager, pgno, &pPg, 1);
+ rc = sqlite3PagerGet(pPager, pgno, &pPg, 1);
assert( (pPager->doNotSpill & SPILLFLAG_ROLLBACK)!=0 );
pPager->doNotSpill &= ~SPILLFLAG_ROLLBACK;
if( rc!=SQLITE_OK ) return rc;
- pPg->flags &= ~PGHDR_NEED_READ;
sqlite3PcacheMakeDirty(pPg);
}
if( pPg ){
pData = pPg->pData;
memcpy(pData, (u8*)aData, pPager->pageSize);
pPager->xReiniter(pPg);
- if( isMainJrnl && (!isSavepnt || *pOffset<=pPager->journalHdr) ){
- /* If the contents of this page were just restored from the main
- ** journal file, then its content must be as they were when the
- ** transaction was first opened. In this case we can mark the page
- ** as clean, since there will be no need to write it out to the
- ** database.
- **
- ** There is one exception to this rule. If the page is being rolled
- ** back as part of a savepoint (or statement) rollback from an
- ** unsynced portion of the main journal file, then it is not safe
- ** to mark the page as clean. This is because marking the page as
- ** clean will clear the PGHDR_NEED_SYNC flag. Since the page is
- ** already in the journal file (recorded in Pager.pInJournal) and
- ** the PGHDR_NEED_SYNC flag is cleared, if the page is written to
- ** again within this transaction, it will be marked as dirty but
- ** the PGHDR_NEED_SYNC flag will not be set. It could then potentially
- ** be written out into the database file before its journal file
- ** segment is synced. If a crash occurs during or following this,
- ** database corruption may ensue.
- */
- assert( !pagerUseWal(pPager) );
- sqlite3PcacheMakeClean(pPg);
- }
+ /* It used to be that sqlite3PcacheMakeClean(pPg) was called here. But
+ ** that call was dangerous and had no detectable benefit since the cache
+ ** is normally cleaned by sqlite3PcacheCleanAll() after rollback and so
+ ** has been removed. */
pager_set_pagehash(pPg);
/* If this was page 1, then restore the value of Pager.dbFileVers.
}
/* Decode the page just read from disk */
- CODEC1(pPager, pData, pPg->pgno, 3, rc=SQLITE_NOMEM);
+#if SQLITE_HAS_CODEC
+ if( jrnlEnc ){ CODEC1(pPager, pData, pPg->pgno, 3, rc=SQLITE_NOMEM_BKPT); }
+#endif
sqlite3PcacheRelease(pPg);
}
return rc;
pMaster = (sqlite3_file *)sqlite3MallocZero(pVfs->szOsFile * 2);
pJournal = (sqlite3_file *)(((u8 *)pMaster) + pVfs->szOsFile);
if( !pMaster ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
const int flags = (SQLITE_OPEN_READONLY|SQLITE_OPEN_MASTER_JOURNAL);
rc = sqlite3OsOpen(pVfs, zMaster, pMaster, flags, 0);
nMasterPtr = pVfs->mxPathname+1;
zMasterJournal = sqlite3Malloc(nMasterJournal + nMasterPtr + 1);
if( !zMasterJournal ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto delmaster_out;
}
zMasterPtr = &zMasterJournal[nMasterJournal+1];
char *zMaster = 0; /* Name of master journal file if any */
int needPagerReset; /* True to reset page prior to first page rollback */
int nPlayback = 0; /* Total number of pages restored from journal */
+ u32 savedPageSize = pPager->pageSize;
/* Figure out how many records are in the journal. Abort early if
** the journal is empty.
** TODO: Technically the following is an error because it assumes that
** buffer Pager.pTmpSpace is (mxPathname+1) bytes or larger. i.e. that
** (pPager->pageSize >= pPager->pVfs->mxPathname+1). Using os_unix.c,
- ** mxPathname is 512, which is the same as the minimum allowable value
+ ** mxPathname is 512, which is the same as the minimum allowable value
** for pageSize.
*/
zMaster = pPager->pTmpSpace;
assert( 0 );
end_playback:
+ if( rc==SQLITE_OK ){
+ rc = sqlite3PagerSetPagesize(pPager, &savedPageSize, -1);
+ }
/* Following a rollback, the database file should be back in its original
** state prior to the start of the transaction, so invoke the
** SQLITE_FCNTL_DB_UNCHANGED file-control method to disable the
** assertion that the transaction counter was modified.
*/
#ifdef SQLITE_DEBUG
- if( pPager->fd->pMethods ){
- sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0);
- }
+ sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0);
#endif
/* If this playback is happening automatically as a result of an IO or
/*
-** Read the content for page pPg out of the database file and into
+** Read the content for page pPg out of the database file (or out of
+** the WAL if that is where the most recent copy if found) into
** pPg->pData. A shared lock or greater must be held on the database
** file before this function is called.
**
** If an IO error occurs, then the IO error is returned to the caller.
** Otherwise, SQLITE_OK is returned.
*/
-static int readDbPage(PgHdr *pPg, u32 iFrame){
+static int readDbPage(PgHdr *pPg){
Pager *pPager = pPg->pPager; /* Pager object associated with page pPg */
- Pgno pgno = pPg->pgno; /* Page number to read */
int rc = SQLITE_OK; /* Return code */
- int pgsz = pPager->pageSize; /* Number of bytes to read */
+
+#ifndef SQLITE_OMIT_WAL
+ u32 iFrame = 0; /* Frame of WAL containing pgno */
assert( pPager->eState>=PAGER_READER && !MEMDB );
assert( isOpen(pPager->fd) );
-#ifndef SQLITE_OMIT_WAL
+ if( pagerUseWal(pPager) ){
+ rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame);
+ if( rc ) return rc;
+ }
if( iFrame ){
- /* Try to pull the page from the write-ahead log. */
- rc = sqlite3WalReadFrame(pPager->pWal, iFrame, pgsz, pPg->pData);
+ rc = sqlite3WalReadFrame(pPager->pWal, iFrame,pPager->pageSize,pPg->pData);
}else
#endif
{
- i64 iOffset = (pgno-1)*(i64)pPager->pageSize;
- rc = sqlite3OsRead(pPager->fd, pPg->pData, pgsz, iOffset);
+ i64 iOffset = (pPg->pgno-1)*(i64)pPager->pageSize;
+ rc = sqlite3OsRead(pPager->fd, pPg->pData, pPager->pageSize, iOffset);
if( rc==SQLITE_IOERR_SHORT_READ ){
rc = SQLITE_OK;
}
}
- if( pgno==1 ){
+ if( pPg->pgno==1 ){
if( rc ){
/* If the read is unsuccessful, set the dbFileVers[] to something
** that will never be a valid file version. dbFileVers[] is a copy
memcpy(&pPager->dbFileVers, dbFileVers, sizeof(pPager->dbFileVers));
}
}
- CODEC1(pPager, pPg->pData, pgno, 3, rc = SQLITE_NOMEM);
+ CODEC1(pPager, pPg->pData, pPg->pgno, 3, rc = SQLITE_NOMEM_BKPT);
PAGER_INCR(sqlite3_pager_readdb_count);
PAGER_INCR(pPager->nRead);
- IOTRACE(("PGIN %p %d\n", pPager, pgno));
+ IOTRACE(("PGIN %p %d\n", pPager, pPg->pgno));
PAGERTRACE(("FETCH %d page %d hash(%08x)\n",
- PAGERID(pPager), pgno, pager_pagehash(pPg)));
+ PAGERID(pPager), pPg->pgno, pager_pagehash(pPg)));
return rc;
}
if( sqlite3PcachePageRefcount(pPg)==1 ){
sqlite3PcacheDrop(pPg);
}else{
- u32 iFrame = 0;
- rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame);
- if( rc==SQLITE_OK ){
- rc = readDbPage(pPg, iFrame);
- }
+ rc = readDbPage(pPg);
if( rc==SQLITE_OK ){
pPager->xReiniter(pPg);
}
*/
assert( pPager->eState==PAGER_OPEN );
assert( pPager->eLock>=SHARED_LOCK );
+ assert( isOpen(pPager->fd) );
+ assert( pPager->tempFile==0 );
nPage = sqlite3WalDbsize(pPager->pWal);
/* If the number of pages in the database is not available from the
- ** WAL sub-system, determine the page counte based on the size of
+ ** WAL sub-system, determine the page count based on the size of
** the database file. If the size of the database file is not an
** integer multiple of the page-size, round up the result.
*/
- if( nPage==0 ){
+ if( nPage==0 && ALWAYS(isOpen(pPager->fd)) ){
i64 n = 0; /* Size of db file in bytes */
- assert( isOpen(pPager->fd) || pPager->tempFile );
- if( isOpen(pPager->fd) ){
- int rc = sqlite3OsFileSize(pPager->fd, &n);
- if( rc!=SQLITE_OK ){
- return rc;
- }
+ int rc = sqlite3OsFileSize(pPager->fd, &n);
+ if( rc!=SQLITE_OK ){
+ return rc;
}
nPage = (Pgno)((n+pPager->pageSize-1) / pPager->pageSize);
}
if( !pPager->tempFile ){
int isWal; /* True if WAL file exists */
- Pgno nPage; /* Size of the database file */
-
- rc = pagerPagecount(pPager, &nPage);
- if( rc ) return rc;
- if( nPage==0 ){
- rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
- if( rc==SQLITE_IOERR_DELETE_NOENT ) rc = SQLITE_OK;
- isWal = 0;
- }else{
- rc = sqlite3OsAccess(
- pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal
- );
- }
+ rc = sqlite3OsAccess(
+ pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal
+ );
if( rc==SQLITE_OK ){
if( isWal ){
- testcase( sqlite3PcachePagecount(pPager->pPCache)==0 );
- rc = sqlite3PagerOpenWal(pPager, 0);
+ Pgno nPage; /* Size of the database file */
+
+ rc = pagerPagecount(pPager, &nPage);
+ if( rc ) return rc;
+ if( nPage==0 ){
+ rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
+ }else{
+ testcase( sqlite3PcachePagecount(pPager->pPCache)==0 );
+ rc = sqlite3PagerOpenWal(pPager, 0);
+ }
}else if( pPager->journalMode==PAGER_JOURNALMODE_WAL ){
pPager->journalMode = PAGER_JOURNALMODE_DELETE;
}
if( pSavepoint ){
pDone = sqlite3BitvecCreate(pSavepoint->nOrig);
if( !pDone ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
}
}
/*
-** Change the maximum number of in-memory pages that are allowed.
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to recycle clean and unused pages.
*/
SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager *pPager, int mxPage){
sqlite3PcacheSetCachesize(pPager->pPCache, mxPage);
}
+/*
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to spill pages to journal.
+*/
+SQLITE_PRIVATE int sqlite3PagerSetSpillsize(Pager *pPager, int mxPage){
+ return sqlite3PcacheSetSpillsize(pPager->pPCache, mxPage);
+}
+
/*
** Invoke SQLITE_FCNTL_MMAP_SIZE based on the current value of szMmap.
*/
sqlite3_int64 sz;
sz = pPager->szMmap;
pPager->bUseFetch = (sz>0);
+ setGetterMethod(pPager);
sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_MMAP_SIZE, &sz);
}
#endif
** The "level" in pgFlags & PAGER_SYNCHRONOUS_MASK sets the robustness
** of the database to damage due to OS crashes or power failures by
** changing the number of syncs()s when writing the journals.
-** There are three levels:
+** There are four levels:
**
** OFF sqlite3OsSync() is never called. This is the default
** for temporary and transient files.
** assurance that the journal will not be corrupted to the
** point of causing damage to the database during rollback.
**
+** EXTRA This is like FULL except that is also syncs the directory
+** that contains the rollback journal after the rollback
+** journal is unlinked.
+**
** The above is for a rollback-journal mode. For WAL mode, OFF continues
** to mean that no syncs ever occur. NORMAL means that the WAL is synced
** prior to the start of checkpoint and that the database file is synced
** was written back into the database. But no sync operations occur for
** an ordinary commit in NORMAL mode with WAL. FULL means that the WAL
** file is synced following each commit operation, in addition to the
-** syncs associated with NORMAL.
+** syncs associated with NORMAL. There is no difference between FULL
+** and EXTRA for WAL mode.
**
** Do not confuse synchronous=FULL with SQLITE_SYNC_FULL. The
** SQLITE_SYNC_FULL macro means to use the MacOSX-style full-fsync
unsigned pgFlags /* Various flags */
){
unsigned level = pgFlags & PAGER_SYNCHRONOUS_MASK;
- assert( level>=1 && level<=3 );
- pPager->noSync = (level==1 || pPager->tempFile) ?1:0;
- pPager->fullSync = (level==3 && !pPager->tempFile) ?1:0;
+ if( pPager->tempFile ){
+ pPager->noSync = 1;
+ pPager->fullSync = 0;
+ pPager->extraSync = 0;
+ }else{
+ pPager->noSync = level==PAGER_SYNCHRONOUS_OFF ?1:0;
+ pPager->fullSync = level>=PAGER_SYNCHRONOUS_FULL ?1:0;
+ pPager->extraSync = level==PAGER_SYNCHRONOUS_EXTRA ?1:0;
+ }
if( pPager->noSync ){
pPager->syncFlags = 0;
- pPager->ckptSyncFlags = 0;
}else if( pgFlags & PAGER_FULLFSYNC ){
pPager->syncFlags = SQLITE_SYNC_FULL;
- pPager->ckptSyncFlags = SQLITE_SYNC_FULL;
- }else if( pgFlags & PAGER_CKPT_FULLFSYNC ){
- pPager->syncFlags = SQLITE_SYNC_NORMAL;
- pPager->ckptSyncFlags = SQLITE_SYNC_FULL;
}else{
pPager->syncFlags = SQLITE_SYNC_NORMAL;
- pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL;
}
- pPager->walSyncFlags = pPager->syncFlags;
+ pPager->walSyncFlags = (pPager->syncFlags<<2);
if( pPager->fullSync ){
- pPager->walSyncFlags |= WAL_SYNC_TRANSACTIONS;
+ pPager->walSyncFlags |= pPager->syncFlags;
+ }
+ if( (pgFlags & PAGER_CKPT_FULLFSYNC) && !pPager->noSync ){
+ pPager->walSyncFlags |= (SQLITE_SYNC_FULL<<2);
}
if( pgFlags & PAGER_CACHESPILL ){
pPager->doNotSpill &= ~SPILLFLAG_OFF;
** retried. If it returns zero, then the SQLITE_BUSY error is
** returned to the caller of the pager API function.
*/
-SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(
+SQLITE_PRIVATE void sqlite3PagerSetBusyHandler(
Pager *pPager, /* Pager object */
int (*xBusyHandler)(void *), /* Pointer to busy-handler function */
void *pBusyHandlerArg /* Argument to pass to xBusyHandler */
){
+ void **ap;
pPager->xBusyHandler = xBusyHandler;
pPager->pBusyHandlerArg = pBusyHandlerArg;
-
- if( isOpen(pPager->fd) ){
- void **ap = (void **)&pPager->xBusyHandler;
- assert( ((int(*)(void *))(ap[0]))==xBusyHandler );
- assert( ap[1]==pBusyHandlerArg );
- sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap);
- }
+ ap = (void **)&pPager->xBusyHandler;
+ assert( ((int(*)(void *))(ap[0]))==xBusyHandler );
+ assert( ap[1]==pBusyHandlerArg );
+ sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap);
}
/*
}
if( rc==SQLITE_OK ){
pNew = (char *)sqlite3PageMalloc(pageSize);
- if( !pNew ) rc = SQLITE_NOMEM;
+ if( !pNew ) rc = SQLITE_NOMEM_BKPT;
}
if( rc==SQLITE_OK ){
return rc;
}
+#if SQLITE_MAX_MMAP_SIZE>0
/*
** Obtain a reference to a memory mapped page object for page number pgno.
** The new object will use the pointer pData, obtained from xFetch().
*ppPage = p = pPager->pMmapFreelist;
pPager->pMmapFreelist = p->pDirty;
p->pDirty = 0;
- memset(p->pExtra, 0, pPager->nExtra);
+ assert( pPager->nExtra>=8 );
+ memset(p->pExtra, 0, 8);
}else{
*ppPage = p = (PgHdr *)sqlite3MallocZero(sizeof(PgHdr) + pPager->nExtra);
if( p==0 ){
sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1) * pPager->pageSize, pData);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
p->pExtra = (void *)&p[1];
p->flags = PGHDR_MMAP;
return SQLITE_OK;
}
+#endif
/*
** Release a reference to page pPg. pPg must have been returned by an
}
}
+/* Verify that the database file has not be deleted or renamed out from
+** under the pager. Return SQLITE_OK if the database is still where it ought
+** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error
+** code from sqlite3OsAccess()) if the database has gone missing.
+*/
+static int databaseIsUnmoved(Pager *pPager){
+ int bHasMoved = 0;
+ int rc;
+
+ if( pPager->tempFile ) return SQLITE_OK;
+ if( pPager->dbSize==0 ) return SQLITE_OK;
+ assert( pPager->zFilename && pPager->zFilename[0] );
+ rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved);
+ if( rc==SQLITE_NOTFOUND ){
+ /* If the HAS_MOVED file-control is unimplemented, assume that the file
+ ** has not been moved. That is the historical behavior of SQLite: prior to
+ ** version 3.8.3, it never checked */
+ rc = SQLITE_OK;
+ }else if( rc==SQLITE_OK && bHasMoved ){
+ rc = SQLITE_READONLY_DBMOVED;
+ }
+ return rc;
+}
+
/*
** Shutdown the page cache. Free all memory and close all files.
** a hot journal may be left in the filesystem but no error is returned
** to the caller.
*/
-SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager){
- u8 *pTmp = (u8 *)pPager->pTmpSpace;
-
+SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3 *db){
+ u8 *pTmp = (u8*)pPager->pTmpSpace;
+ assert( db || pagerUseWal(pPager)==0 );
assert( assert_pager_state(pPager) );
disable_simulated_io_errors();
sqlite3BeginBenignMalloc();
/* pPager->errCode = 0; */
pPager->exclusiveMode = 0;
#ifndef SQLITE_OMIT_WAL
- sqlite3WalClose(pPager->pWal, pPager->ckptSyncFlags, pPager->pageSize, pTmp);
- pPager->pWal = 0;
+ {
+ u8 *a = 0;
+ assert( db || pPager->pWal==0 );
+ if( db && 0==(db->flags & SQLITE_NoCkptOnClose)
+ && SQLITE_OK==databaseIsUnmoved(pPager)
+ ){
+ a = pTmp;
+ }
+ sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize,a);
+ pPager->pWal = 0;
+ }
#endif
pager_reset(pPager);
if( MEMDB ){
/* This function is only called for rollback pagers in WRITER_DBMOD state. */
assert( !pagerUseWal(pPager) );
- assert( pPager->eState==PAGER_WRITER_DBMOD );
+ assert( pPager->tempFile || pPager->eState==PAGER_WRITER_DBMOD );
assert( pPager->eLock==EXCLUSIVE_LOCK );
+ assert( isOpen(pPager->fd) || pList->pDirty==0 );
/* If the file is a temp-file has not yet been opened, open it now. It
** is not possible for rc to be other than SQLITE_OK if this branch
if( pList->pgno==1 ) pager_write_changecounter(pList);
/* Encode the database */
- CODEC2(pPager, pList->pData, pgno, 6, return SQLITE_NOMEM, pData);
+ CODEC2(pPager, pList->pData, pgno, 6, return SQLITE_NOMEM_BKPT, pData);
/* Write out the page data. */
rc = sqlite3OsWrite(pPager->fd, pData, pPager->pageSize, offset);
static int openSubJournal(Pager *pPager){
int rc = SQLITE_OK;
if( !isOpen(pPager->sjfd) ){
+ const int flags = SQLITE_OPEN_SUBJOURNAL | SQLITE_OPEN_READWRITE
+ | SQLITE_OPEN_CREATE | SQLITE_OPEN_EXCLUSIVE
+ | SQLITE_OPEN_DELETEONCLOSE;
+ int nStmtSpill = sqlite3Config.nStmtSpill;
if( pPager->journalMode==PAGER_JOURNALMODE_MEMORY || pPager->subjInMemory ){
- sqlite3MemJournalOpen(pPager->sjfd);
- }else{
- rc = pagerOpentemp(pPager, pPager->sjfd, SQLITE_OPEN_SUBJOURNAL);
+ nStmtSpill = -1;
}
+ rc = sqlite3JournalOpen(pPager->pVfs, 0, pPager->sjfd, flags, nStmtSpill);
}
return rc;
}
void *pData = pPg->pData;
i64 offset = (i64)pPager->nSubRec*(4+pPager->pageSize);
char *pData2;
-
- CODEC2(pPager, pData, pPg->pgno, 7, return SQLITE_NOMEM, pData2);
+
+#if SQLITE_HAS_CODEC
+ if( !pPager->subjInMemory ){
+ CODEC2(pPager, pData, pPg->pgno, 7, return SQLITE_NOMEM_BKPT, pData2);
+ }else
+#endif
+ pData2 = pData;
PAGERTRACE(("STMT-JOURNAL %d page %d\n", PAGERID(pPager), pPg->pgno));
rc = write32bits(pPager->sjfd, offset, pPg->pgno);
if( rc==SQLITE_OK ){
return SQLITE_OK;
}
+ pPager->aStat[PAGER_STAT_SPILL]++;
pPg->pDirty = 0;
if( pagerUseWal(pPager) ){
/* Write a single frame for this page to the log. */
rc = pagerWalFrames(pPager, pPg, 0, 0);
}
}else{
+
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( pPager->tempFile==0 ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) return pager_error(pPager, rc);
+ }
+#endif
/* Sync the journal file if required. */
if( pPg->flags&PGHDR_NEED_SYNC
return pager_error(pPager, rc);
}
+/*
+** Flush all unreferenced dirty pages to disk.
+*/
+SQLITE_PRIVATE int sqlite3PagerFlush(Pager *pPager){
+ int rc = pPager->errCode;
+ if( !MEMDB ){
+ PgHdr *pList = sqlite3PcacheDirtyList(pPager->pPCache);
+ assert( assert_pager_state(pPager) );
+ while( rc==SQLITE_OK && pList ){
+ PgHdr *pNext = pList->pDirty;
+ if( pList->nRef==0 ){
+ rc = pagerStress((void*)pPager, pList);
+ }
+ pList = pNext;
+ }
+ }
+
+ return rc;
+}
/*
** Allocate and initialize a new Pager object and put a pointer to it
**
** The nExtra parameter specifies the number of bytes of space allocated
** along with each page reference. This space is available to the user
-** via the sqlite3PagerGetExtra() API.
+** via the sqlite3PagerGetExtra() API. When a new page is allocated, the
+** first 8 bytes of this space are zeroed but the remainder is uninitialized.
+** (The extra space is used by btree as the MemPage object.)
**
** The flags argument is used to specify properties that affect the
** operation of the pager. It should be passed some bitwise combination
int rc = SQLITE_OK; /* Return code */
int tempFile = 0; /* True for temp files (incl. in-memory files) */
int memDb = 0; /* True if this is an in-memory file */
+#ifdef SQLITE_ENABLE_DESERIALIZE
+ int memJM = 0; /* Memory journal mode */
+#else
+# define memJM 0
+#endif
int readOnly = 0; /* True if this is a read-only file */
int journalFileSize; /* Bytes to allocate for each journal fd */
char *zPathname = 0; /* Full path to database file */
int nUri = 0; /* Number of bytes of URI args at *zUri */
/* Figure out how much space is required for each journal file-handle
- ** (there are two of them, the main journal and the sub-journal). This
- ** is the maximum space required for an in-memory journal file handle
- ** and a regular journal file-handle. Note that a "regular journal-handle"
- ** may be a wrapper capable of caching the first portion of the journal
- ** file in memory to implement the atomic-write optimization (see
- ** source file journal.c).
- */
- if( sqlite3JournalSize(pVfs)>sqlite3MemJournalSize() ){
- journalFileSize = ROUND8(sqlite3JournalSize(pVfs));
- }else{
- journalFileSize = ROUND8(sqlite3MemJournalSize());
- }
+ ** (there are two of them, the main journal and the sub-journal). */
+ journalFileSize = ROUND8(sqlite3JournalSize(pVfs));
/* Set the output variable to NULL in case an error occurs. */
*ppPager = 0;
memDb = 1;
if( zFilename && zFilename[0] ){
zPathname = sqlite3DbStrDup(0, zFilename);
- if( zPathname==0 ) return SQLITE_NOMEM;
+ if( zPathname==0 ) return SQLITE_NOMEM_BKPT;
nPathname = sqlite3Strlen30(zPathname);
zFilename = 0;
}
nPathname = pVfs->mxPathname+1;
zPathname = sqlite3DbMallocRaw(0, nPathname*2);
if( zPathname==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
zPathname[0] = 0; /* Make sure initialized even if FullPathname() fails */
rc = sqlite3OsFullPathname(pVfs, zFilename, nPathname, zPathname);
assert( EIGHT_BYTE_ALIGNMENT(SQLITE_INT_TO_PTR(journalFileSize)) );
if( !pPtr ){
sqlite3DbFree(0, zPathname);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pPager = (Pager*)(pPtr);
pPager->pPCache = (PCache*)(pPtr += ROUND8(sizeof(*pPager)));
int fout = 0; /* VFS flags returned by xOpen() */
rc = sqlite3OsOpen(pVfs, pPager->zFilename, pPager->fd, vfsFlags, &fout);
assert( !memDb );
- readOnly = (fout&SQLITE_OPEN_READONLY);
+#ifdef SQLITE_ENABLE_DESERIALIZE
+ memJM = (fout&SQLITE_OPEN_MEMORY)!=0;
+#endif
+ readOnly = (fout&SQLITE_OPEN_READONLY)!=0;
/* If the file was successfully opened for read/write access,
** choose a default page size in case we have to create the
/* Initialize the PCache object. */
if( rc==SQLITE_OK ){
- assert( nExtra<1000 );
nExtra = ROUND8(nExtra);
+ assert( nExtra>=8 && nExtra<1000 );
rc = sqlite3PcacheOpen(szPageDflt, nExtra, !memDb,
!memDb?pagerStress:0, (void *)pPager, pPager->pPCache);
}
pPager->noSync = pPager->tempFile;
if( pPager->noSync ){
assert( pPager->fullSync==0 );
+ assert( pPager->extraSync==0 );
assert( pPager->syncFlags==0 );
assert( pPager->walSyncFlags==0 );
- assert( pPager->ckptSyncFlags==0 );
}else{
pPager->fullSync = 1;
+ pPager->extraSync = 0;
pPager->syncFlags = SQLITE_SYNC_NORMAL;
- pPager->walSyncFlags = SQLITE_SYNC_NORMAL | WAL_SYNC_TRANSACTIONS;
- pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL;
+ pPager->walSyncFlags = SQLITE_SYNC_NORMAL | (SQLITE_SYNC_NORMAL<<2);
}
/* pPager->pFirst = 0; */
/* pPager->pFirstSynced = 0; */
setSectorSize(pPager);
if( !useJournal ){
pPager->journalMode = PAGER_JOURNALMODE_OFF;
- }else if( memDb ){
+ }else if( memDb || memJM ){
pPager->journalMode = PAGER_JOURNALMODE_MEMORY;
}
/* pPager->xBusyHandler = 0; */
/* pPager->pBusyHandlerArg = 0; */
pPager->xReiniter = xReinit;
+ setGetterMethod(pPager);
/* memset(pPager->aHash, 0, sizeof(pPager->aHash)); */
/* pPager->szMmap = SQLITE_DEFAULT_MMAP_SIZE // will be set by btree.c */
}
-/* Verify that the database file has not be deleted or renamed out from
-** under the pager. Return SQLITE_OK if the database is still were it ought
-** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error
-** code from sqlite3OsAccess()) if the database has gone missing.
-*/
-static int databaseIsUnmoved(Pager *pPager){
- int bHasMoved = 0;
- int rc;
-
- if( pPager->tempFile ) return SQLITE_OK;
- if( pPager->dbSize==0 ) return SQLITE_OK;
- assert( pPager->zFilename && pPager->zFilename[0] );
- rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved);
- if( rc==SQLITE_NOTFOUND ){
- /* If the HAS_MOVED file-control is unimplemented, assume that the file
- ** has not been moved. That is the historical behavior of SQLite: prior to
- ** version 3.8.3, it never checked */
- rc = SQLITE_OK;
- }else if( rc==SQLITE_OK && bHasMoved ){
- rc = SQLITE_READONLY_DBMOVED;
- }
- return rc;
-}
-
/*
** This function is called after transitioning from PAGER_UNLOCK to
if( rc==SQLITE_OK && !locked ){
Pgno nPage; /* Number of pages in database file */
+ assert( pPager->tempFile==0 );
rc = pagerPagecount(pPager, &nPage);
if( rc==SQLITE_OK ){
/* If the database is zero pages in size, that means that either (1) the
/*
** This function is called to obtain a shared lock on the database file.
-** It is illegal to call sqlite3PagerAcquire() until after this function
+** It is illegal to call sqlite3PagerGet() until after this function
** has been successfully called. If a shared-lock is already held when
** this function is called, it is a no-op.
**
/* This routine is only called from b-tree and only when there are no
** outstanding pages. This implies that the pager state should either
** be OPEN or READER. READER is only possible if the pager is or was in
- ** exclusive access mode.
- */
+ ** exclusive access mode. */
assert( sqlite3PcacheRefCount(pPager->pPCache)==0 );
assert( assert_pager_state(pPager) );
assert( pPager->eState==PAGER_OPEN || pPager->eState==PAGER_READER );
- if( NEVER(MEMDB && pPager->errCode) ){ return pPager->errCode; }
+ assert( pPager->errCode==SQLITE_OK );
if( !pagerUseWal(pPager) && pPager->eState==PAGER_OPEN ){
int bHotJournal = 1; /* True if there exists a hot journal-file */
assert( !MEMDB );
+ assert( pPager->tempFile==0 || pPager->eLock==EXCLUSIVE_LOCK );
rc = pager_wait_on_lock(pPager, SHARED_LOCK);
if( rc!=SQLITE_OK ){
assert( rc==SQLITE_OK );
rc = pagerSyncHotJournal(pPager);
if( rc==SQLITE_OK ){
- rc = pager_playback(pPager, 1);
+ rc = pager_playback(pPager, !pPager->tempFile);
pPager->eState = PAGER_OPEN;
}
}else if( !pPager->exclusiveMode ){
** detected. The chance of an undetected change is so small that
** it can be neglected.
*/
- Pgno nPage = 0;
char dbFileVers[sizeof(pPager->dbFileVers)];
- rc = pagerPagecount(pPager, &nPage);
- if( rc ) goto failed;
-
- if( nPage>0 ){
- IOTRACE(("CKVERS %p %d\n", pPager, sizeof(dbFileVers)));
- rc = sqlite3OsRead(pPager->fd, &dbFileVers, sizeof(dbFileVers), 24);
- if( rc!=SQLITE_OK && rc!=SQLITE_IOERR_SHORT_READ ){
+ IOTRACE(("CKVERS %p %d\n", pPager, sizeof(dbFileVers)));
+ rc = sqlite3OsRead(pPager->fd, &dbFileVers, sizeof(dbFileVers), 24);
+ if( rc!=SQLITE_OK ){
+ if( rc!=SQLITE_IOERR_SHORT_READ ){
goto failed;
}
- }else{
memset(dbFileVers, 0, sizeof(dbFileVers));
}
rc = pagerBeginReadTransaction(pPager);
}
- if( pPager->eState==PAGER_OPEN && rc==SQLITE_OK ){
+ if( pPager->tempFile==0 && pPager->eState==PAGER_OPEN && rc==SQLITE_OK ){
rc = pagerPagecount(pPager, &pPager->dbSize);
}
** nothing to rollback, so this routine is a no-op.
*/
static void pagerUnlockIfUnused(Pager *pPager){
- if( pPager->nMmapOut==0 && (sqlite3PcacheRefCount(pPager->pPCache)==0) ){
+ if( sqlite3PcacheRefCount(pPager->pPCache)==0 ){
+ assert( pPager->nMmapOut==0 ); /* because page1 is never memory mapped */
pagerUnlockAndRollback(pPager);
}
}
/*
-** Acquire a reference to page number pgno in pager pPager (a page
-** reference has type DbPage*). If the requested reference is
+** The page getter methods each try to acquire a reference to a
+** page with page number pgno. If the requested reference is
** successfully obtained, it is copied to *ppPage and SQLITE_OK returned.
**
+** There are different implementations of the getter method depending
+** on the current state of the pager.
+**
+** getPageNormal() -- The normal getter
+** getPageError() -- Used if the pager is in an error state
+** getPageMmap() -- Used if memory-mapped I/O is enabled
+**
** If the requested page is already in the cache, it is returned.
** Otherwise, a new page object is allocated and populated with data
** read from the database file. In some cases, the pcache module may
** already in the cache when this function is called, then the extra
** data is left as it was when the page object was last used.
**
-** If the database image is smaller than the requested page or if a
-** non-zero value is passed as the noContent parameter and the
+** If the database image is smaller than the requested page or if
+** the flags parameter contains the PAGER_GET_NOCONTENT bit and the
** requested page is not already stored in the cache, then no
** actual disk read occurs. In this case the memory image of the
** page is initialized to all zeros.
**
-** If noContent is true, it means that we do not care about the contents
-** of the page. This occurs in two scenarios:
+** If PAGER_GET_NOCONTENT is true, it means that we do not care about
+** the contents of the page. This occurs in two scenarios:
**
** a) When reading a free-list leaf page from the database, and
**
** a new page into the cache to be filled with the data read
** from the savepoint journal.
**
-** If noContent is true, then the data returned is zeroed instead of
-** being read from the database. Additionally, the bits corresponding
+** If PAGER_GET_NOCONTENT is true, then the data returned is zeroed instead
+** of being read from the database. Additionally, the bits corresponding
** to pgno in Pager.pInJournal (bitvec of pages already written to the
** journal file) and the PagerSavepoint.pInSavepoint bitvecs of any open
** savepoints are set. This means if the page is made writable at any
** Since Lookup() never goes to disk, it never has to deal with locks
** or journal files.
*/
-SQLITE_PRIVATE int sqlite3PagerAcquire(
+static int getPageNormal(
Pager *pPager, /* The pager open on the database file */
Pgno pgno, /* Page number to fetch */
DbPage **ppPage, /* Write a pointer to the page here */
int flags /* PAGER_GET_XXX flags */
){
int rc = SQLITE_OK;
- PgHdr *pPg = 0;
- u32 iFrame = 0; /* Frame to read from WAL file */
- const int noContent = (flags & PAGER_GET_NOCONTENT);
-
- /* It is acceptable to use a read-only (mmap) page for any page except
- ** page 1 if there is no write-transaction open or the ACQUIRE_READONLY
- ** flag was specified by the caller. And so long as the db is not a
- ** temporary or in-memory database. */
- const int bMmapOk = (pgno>1 && USEFETCH(pPager)
- && (pPager->eState==PAGER_READER || (flags & PAGER_GET_READONLY))
-#ifdef SQLITE_HAS_CODEC
- && pPager->xCodec==0
-#endif
- );
+ PgHdr *pPg;
+ u8 noContent; /* True if PAGER_GET_NOCONTENT is set */
+ sqlite3_pcache_page *pBase;
- /* Optimization note: Adding the "pgno<=1" term before "pgno==0" here
- ** allows the compiler optimizer to reuse the results of the "pgno>1"
- ** test in the previous statement, and avoid testing pgno==0 in the
- ** common case where pgno is large. */
- if( pgno<=1 && pgno==0 ){
- return SQLITE_CORRUPT_BKPT;
- }
+ assert( pPager->errCode==SQLITE_OK );
assert( pPager->eState>=PAGER_READER );
assert( assert_pager_state(pPager) );
- assert( noContent==0 || bMmapOk==0 );
-
assert( pPager->hasHeldSharedLock==1 );
- /* If the pager is in the error state, return an error immediately.
- ** Otherwise, request the page from the PCache layer. */
- if( pPager->errCode!=SQLITE_OK ){
- rc = pPager->errCode;
- }else{
- if( bMmapOk && pagerUseWal(pPager) ){
- rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame);
- if( rc!=SQLITE_OK ) goto pager_acquire_err;
- }
-
- if( bMmapOk && iFrame==0 ){
- void *pData = 0;
-
- rc = sqlite3OsFetch(pPager->fd,
- (i64)(pgno-1) * pPager->pageSize, pPager->pageSize, &pData
- );
-
- if( rc==SQLITE_OK && pData ){
- if( pPager->eState>PAGER_READER ){
- pPg = sqlite3PagerLookup(pPager, pgno);
- }
- if( pPg==0 ){
- rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg);
- }else{
- sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData);
- }
- if( pPg ){
- assert( rc==SQLITE_OK );
- *ppPage = pPg;
- return SQLITE_OK;
- }
- }
- if( rc!=SQLITE_OK ){
- goto pager_acquire_err;
- }
- }
-
- {
- sqlite3_pcache_page *pBase;
- pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3);
- if( pBase==0 ){
- rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase);
- if( rc!=SQLITE_OK ) goto pager_acquire_err;
- if( pBase==0 ){
- pPg = *ppPage = 0;
- rc = SQLITE_NOMEM;
- goto pager_acquire_err;
- }
- }
- pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase);
- assert( pPg!=0 );
- }
- }
-
- if( rc!=SQLITE_OK ){
- /* Either the call to sqlite3PcacheFetch() returned an error or the
- ** pager was already in the error-state when this function was called.
- ** Set pPg to 0 and jump to the exception handler. */
+ if( pgno==0 ) return SQLITE_CORRUPT_BKPT;
+ pBase = sqlite3PcacheFetch(pPager->pPCache, pgno, 3);
+ if( pBase==0 ){
pPg = 0;
- goto pager_acquire_err;
+ rc = sqlite3PcacheFetchStress(pPager->pPCache, pgno, &pBase);
+ if( rc!=SQLITE_OK ) goto pager_acquire_err;
+ if( pBase==0 ){
+ rc = SQLITE_NOMEM_BKPT;
+ goto pager_acquire_err;
+ }
}
+ pPg = *ppPage = sqlite3PcacheFetchFinish(pPager->pPCache, pgno, pBase);
assert( pPg==(*ppPage) );
assert( pPg->pgno==pgno );
assert( pPg->pPager==pPager || pPg->pPager==0 );
+ noContent = (flags & PAGER_GET_NOCONTENT)!=0;
if( pPg->pPager && !noContent ){
/* In this case the pcache already contains an initialized copy of
** the page. Return without further ado. */
}else{
/* The pager cache has created a new page. Its content needs to
- ** be initialized. */
-
- pPg->pPager = pPager;
-
- /* The maximum page number is 2^31. Return SQLITE_CORRUPT if a page
- ** number greater than this, or the unused locking-page, is requested. */
+ ** be initialized. But first some error checks:
+ **
+ ** (1) The maximum page number is 2^31
+ ** (2) Never try to fetch the locking page
+ */
if( pgno>PAGER_MAX_PGNO || pgno==PAGER_MJ_PGNO(pPager) ){
rc = SQLITE_CORRUPT_BKPT;
goto pager_acquire_err;
}
- if( MEMDB || pPager->dbSize<pgno || noContent || !isOpen(pPager->fd) ){
+ pPg->pPager = pPager;
+
+ assert( !isOpen(pPager->fd) || !MEMDB );
+ if( !isOpen(pPager->fd) || pPager->dbSize<pgno || noContent ){
if( pgno>pPager->mxPgno ){
rc = SQLITE_FULL;
goto pager_acquire_err;
memset(pPg->pData, 0, pPager->pageSize);
IOTRACE(("ZERO %p %d\n", pPager, pgno));
}else{
- if( pagerUseWal(pPager) && bMmapOk==0 ){
- rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame);
- if( rc!=SQLITE_OK ) goto pager_acquire_err;
- }
assert( pPg->pPager==pPager );
pPager->aStat[PAGER_STAT_MISS]++;
- rc = readDbPage(pPg, iFrame);
+ rc = readDbPage(pPg);
if( rc!=SQLITE_OK ){
goto pager_acquire_err;
}
}
pager_set_pagehash(pPg);
}
-
return SQLITE_OK;
pager_acquire_err:
sqlite3PcacheDrop(pPg);
}
pagerUnlockIfUnused(pPager);
-
*ppPage = 0;
return rc;
}
+#if SQLITE_MAX_MMAP_SIZE>0
+/* The page getter for when memory-mapped I/O is enabled */
+static int getPageMMap(
+ Pager *pPager, /* The pager open on the database file */
+ Pgno pgno, /* Page number to fetch */
+ DbPage **ppPage, /* Write a pointer to the page here */
+ int flags /* PAGER_GET_XXX flags */
+){
+ int rc = SQLITE_OK;
+ PgHdr *pPg = 0;
+ u32 iFrame = 0; /* Frame to read from WAL file */
+
+ /* It is acceptable to use a read-only (mmap) page for any page except
+ ** page 1 if there is no write-transaction open or the ACQUIRE_READONLY
+ ** flag was specified by the caller. And so long as the db is not a
+ ** temporary or in-memory database. */
+ const int bMmapOk = (pgno>1
+ && (pPager->eState==PAGER_READER || (flags & PAGER_GET_READONLY))
+ );
+
+ assert( USEFETCH(pPager) );
+#ifdef SQLITE_HAS_CODEC
+ assert( pPager->xCodec==0 );
+#endif
+
+ /* Optimization note: Adding the "pgno<=1" term before "pgno==0" here
+ ** allows the compiler optimizer to reuse the results of the "pgno>1"
+ ** test in the previous statement, and avoid testing pgno==0 in the
+ ** common case where pgno is large. */
+ if( pgno<=1 && pgno==0 ){
+ return SQLITE_CORRUPT_BKPT;
+ }
+ assert( pPager->eState>=PAGER_READER );
+ assert( assert_pager_state(pPager) );
+ assert( pPager->hasHeldSharedLock==1 );
+ assert( pPager->errCode==SQLITE_OK );
+
+ if( bMmapOk && pagerUseWal(pPager) ){
+ rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame);
+ if( rc!=SQLITE_OK ){
+ *ppPage = 0;
+ return rc;
+ }
+ }
+ if( bMmapOk && iFrame==0 ){
+ void *pData = 0;
+ rc = sqlite3OsFetch(pPager->fd,
+ (i64)(pgno-1) * pPager->pageSize, pPager->pageSize, &pData
+ );
+ if( rc==SQLITE_OK && pData ){
+ if( pPager->eState>PAGER_READER || pPager->tempFile ){
+ pPg = sqlite3PagerLookup(pPager, pgno);
+ }
+ if( pPg==0 ){
+ rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg);
+ }else{
+ sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData);
+ }
+ if( pPg ){
+ assert( rc==SQLITE_OK );
+ *ppPage = pPg;
+ return SQLITE_OK;
+ }
+ }
+ if( rc!=SQLITE_OK ){
+ *ppPage = 0;
+ return rc;
+ }
+ }
+ return getPageNormal(pPager, pgno, ppPage, flags);
+}
+#endif /* SQLITE_MAX_MMAP_SIZE>0 */
+
+/* The page getter method for when the pager is an error state */
+static int getPageError(
+ Pager *pPager, /* The pager open on the database file */
+ Pgno pgno, /* Page number to fetch */
+ DbPage **ppPage, /* Write a pointer to the page here */
+ int flags /* PAGER_GET_XXX flags */
+){
+ UNUSED_PARAMETER(pgno);
+ UNUSED_PARAMETER(flags);
+ assert( pPager->errCode!=SQLITE_OK );
+ *ppPage = 0;
+ return pPager->errCode;
+}
+
+
+/* Dispatch all page fetch requests to the appropriate getter method.
+*/
+SQLITE_PRIVATE int sqlite3PagerGet(
+ Pager *pPager, /* The pager open on the database file */
+ Pgno pgno, /* Page number to fetch */
+ DbPage **ppPage, /* Write a pointer to the page here */
+ int flags /* PAGER_GET_XXX flags */
+){
+ return pPager->xGet(pPager, pgno, ppPage, flags);
+}
+
/*
** Acquire a page if it is already in the in-memory cache. Do
** not read the page from disk. Return a pointer to the page,
/*
** Release a page reference.
**
-** If the number of references to the page drop to zero, then the
-** page is added to the LRU list. When all references to all pages
-** are released, a rollback occurs and the lock on the database is
-** removed.
+** The sqlite3PagerUnref() and sqlite3PagerUnrefNotNull() may only be
+** used if we know that the page being released is not the last page.
+** The btree layer always holds page1 open until the end, so these first
+** to routines can be used to release any page other than BtShared.pPage1.
+**
+** Use sqlite3PagerUnrefPageOne() to release page1. This latter routine
+** checks the total number of outstanding pages and if the number of
+** pages reaches zero it drops the database lock.
*/
SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage *pPg){
- Pager *pPager;
+ TESTONLY( Pager *pPager = pPg->pPager; )
assert( pPg!=0 );
- pPager = pPg->pPager;
if( pPg->flags & PGHDR_MMAP ){
+ assert( pPg->pgno!=1 ); /* Page1 is never memory mapped */
pagerReleaseMapPage(pPg);
}else{
sqlite3PcacheRelease(pPg);
}
- pagerUnlockIfUnused(pPager);
+ /* Do not use this routine to release the last reference to page1 */
+ assert( sqlite3PcacheRefCount(pPager->pPCache)>0 );
}
SQLITE_PRIVATE void sqlite3PagerUnref(DbPage *pPg){
if( pPg ) sqlite3PagerUnrefNotNull(pPg);
}
+SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage *pPg){
+ Pager *pPager;
+ assert( pPg!=0 );
+ assert( pPg->pgno==1 );
+ assert( (pPg->flags & PGHDR_MMAP)==0 ); /* Page1 is never memory mapped */
+ pPager = pPg->pPager;
+ sqlite3PagerResetLockTimeout(pPager);
+ sqlite3PcacheRelease(pPg);
+ pagerUnlockIfUnused(pPager);
+}
/*
** This function is called at the start of every write transaction.
if( !pagerUseWal(pPager) && pPager->journalMode!=PAGER_JOURNALMODE_OFF ){
pPager->pInJournal = sqlite3BitvecCreate(pPager->dbSize);
if( pPager->pInJournal==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/* Open the journal file if it is not already open. */
if( pPager->journalMode==PAGER_JOURNALMODE_MEMORY ){
sqlite3MemJournalOpen(pPager->jfd);
}else{
- const int flags = /* VFS flags to open journal file */
- SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE|
- (pPager->tempFile ?
- (SQLITE_OPEN_DELETEONCLOSE|SQLITE_OPEN_TEMP_JOURNAL):
- (SQLITE_OPEN_MAIN_JOURNAL)
- );
+ int flags = SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE;
+ int nSpill;
+ if( pPager->tempFile ){
+ flags |= (SQLITE_OPEN_DELETEONCLOSE|SQLITE_OPEN_TEMP_JOURNAL);
+ nSpill = sqlite3Config.nStmtSpill;
+ }else{
+ flags |= SQLITE_OPEN_MAIN_JOURNAL;
+ nSpill = jrnlBufferSize(pPager);
+ }
+
/* Verify that the database still has the same name as it did when
** it was originally opened. */
rc = databaseIsUnmoved(pPager);
if( rc==SQLITE_OK ){
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
- rc = sqlite3JournalOpen(
- pVfs, pPager->zJournal, pPager->jfd, flags, jrnlBufferSize(pPager)
+ rc = sqlite3JournalOpen (
+ pVfs, pPager->zJournal, pPager->jfd, flags, nSpill
);
-#else
- rc = sqlite3OsOpen(pVfs, pPager->zJournal, pPager->jfd, flags, 0);
-#endif
}
}
assert( rc!=SQLITE_OK || isOpen(pPager->jfd) );
if( rc!=SQLITE_OK ){
return rc;
}
- sqlite3WalExclusiveMode(pPager->pWal, 1);
+ (void)sqlite3WalExclusiveMode(pPager->pWal, 1);
}
/* Grab the write lock on the log file. If successful, upgrade to
assert( pPg->pgno!=PAGER_MJ_PGNO(pPager) );
assert( pPager->journalHdr<=pPager->journalOff );
- CODEC2(pPager, pPg->pData, pPg->pgno, 7, return SQLITE_NOMEM, pData2);
+ CODEC2(pPager, pPg->pData, pPg->pgno, 7, return SQLITE_NOMEM_BKPT, pData2);
cksum = pager_cksum(pPager, (u8*)pData2);
/* Even if an IO or diskfull error occurs while journalling the
PgHdr *pPage;
if( pg==pPg->pgno || !sqlite3BitvecTest(pPager->pInJournal, pg) ){
if( pg!=PAGER_MJ_PGNO(pPager) ){
- rc = sqlite3PagerGet(pPager, pg, &pPage);
+ rc = sqlite3PagerGet(pPager, pg, &pPage, 0);
if( rc==SQLITE_OK ){
rc = pager_write(pPage);
if( pPage->flags&PGHDR_NEED_SYNC ){
Pager *pPager = pPg->pPager;
assert( (pPg->flags & PGHDR_MMAP)==0 );
assert( pPager->eState>=PAGER_WRITER_LOCKED );
- assert( pPager->eState!=PAGER_ERROR );
assert( assert_pager_state(pPager) );
if( (pPg->flags & PGHDR_WRITEABLE)!=0 && pPager->dbSize>=pPg->pgno ){
if( pPager->nSavepoint ) return subjournalPageIfRequired(pPg);
return SQLITE_OK;
+ }else if( pPager->errCode ){
+ return pPager->errCode;
}else if( pPager->sectorSize > (u32)pPager->pageSize ){
+ assert( pPager->tempFile==0 );
return pagerWriteLargeSector(pPg);
}else{
return pager_write(pPg);
**
** Tests show that this optimization can quadruple the speed of large
** DELETE operations.
+**
+** This optimization cannot be used with a temp-file, as the page may
+** have been dirty at the start of the transaction. In that case, if
+** memory pressure forces page pPg out of the cache, the data does need
+** to be written out to disk so that it may be read back in if the
+** current transaction is rolled back.
*/
SQLITE_PRIVATE void sqlite3PagerDontWrite(PgHdr *pPg){
Pager *pPager = pPg->pPager;
- if( (pPg->flags&PGHDR_DIRTY) && pPager->nSavepoint==0 ){
+ if( !pPager->tempFile && (pPg->flags&PGHDR_DIRTY) && pPager->nSavepoint==0 ){
PAGERTRACE(("DONT_WRITE page %d of %d\n", pPg->pgno, PAGERID(pPager)));
IOTRACE(("CLEAN %p %d\n", pPager, pPg->pgno))
pPg->flags |= PGHDR_DONT_WRITE;
pPg->flags &= ~PGHDR_WRITEABLE;
+ testcase( pPg->flags & PGHDR_NEED_SYNC );
pager_set_pagehash(pPg);
}
}
assert( !pPager->tempFile && isOpen(pPager->fd) );
/* Open page 1 of the file for writing. */
- rc = sqlite3PagerGet(pPager, 1, &pPgHdr);
+ rc = sqlite3PagerGet(pPager, 1, &pPgHdr, 0);
assert( pPgHdr==0 || rc==SQLITE_OK );
/* If page one was fetched successfully, and this function is not
if( DIRECT_MODE ){
const void *zBuf;
assert( pPager->dbFileSize>0 );
- CODEC2(pPager, pPgHdr->pData, 1, 6, rc=SQLITE_NOMEM, zBuf);
+ CODEC2(pPager, pPgHdr->pData, 1, 6, rc=SQLITE_NOMEM_BKPT, zBuf);
if( rc==SQLITE_OK ){
rc = sqlite3OsWrite(pPager->fd, zBuf, pPager->pageSize, 0);
pPager->aStat[PAGER_STAT_WRITE]++;
*/
SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster){
int rc = SQLITE_OK;
-
- if( isOpen(pPager->fd) ){
- void *pArg = (void*)zMaster;
- rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg);
- if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
- }
+ void *pArg = (void*)zMaster;
+ rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg);
+ if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK;
if( rc==SQLITE_OK && !pPager->noSync ){
assert( !MEMDB );
rc = sqlite3OsSync(pPager->fd, pPager->syncFlags);
** returned.
*/
SQLITE_PRIVATE int sqlite3PagerExclusiveLock(Pager *pPager){
- int rc = SQLITE_OK;
- assert( pPager->eState==PAGER_WRITER_CACHEMOD
- || pPager->eState==PAGER_WRITER_DBMOD
- || pPager->eState==PAGER_WRITER_LOCKED
- );
+ int rc = pPager->errCode;
assert( assert_pager_state(pPager) );
- if( 0==pagerUseWal(pPager) ){
- rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
+ if( rc==SQLITE_OK ){
+ assert( pPager->eState==PAGER_WRITER_CACHEMOD
+ || pPager->eState==PAGER_WRITER_DBMOD
+ || pPager->eState==PAGER_WRITER_LOCKED
+ );
+ assert( assert_pager_state(pPager) );
+ if( 0==pagerUseWal(pPager) ){
+ rc = pager_wait_on_lock(pPager, EXCLUSIVE_LOCK);
+ }
}
return rc;
}
/* If a prior error occurred, report that error again. */
if( NEVER(pPager->errCode) ) return pPager->errCode;
+ /* Provide the ability to easily simulate an I/O error during testing */
+ if( sqlite3FaultSim(400) ) return SQLITE_IOERR;
+
PAGERTRACE(("DATABASE SYNC: File=%s zMaster=%s nSize=%d\n",
pPager->zFilename, zMaster, pPager->dbSize));
/* If no database changes have been made, return early. */
if( pPager->eState<PAGER_WRITER_CACHEMOD ) return SQLITE_OK;
- if( MEMDB ){
+ assert( MEMDB==0 || pPager->tempFile );
+ assert( isOpen(pPager->fd) || pPager->tempFile );
+ if( 0==pagerFlushOnCommit(pPager, 1) ){
/* If this is an in-memory db, or no pages have been written to, or this
** function has already been called, it is mostly a no-op. However, any
- ** backup in progress needs to be restarted.
- */
+ ** backup in progress needs to be restarted. */
sqlite3BackupRestart(pPager->pBackup);
}else{
if( pagerUseWal(pPager) ){
if( pList==0 ){
/* Must have at least one page for the WAL commit flag.
** Ticket [2d1a5c67dfc2363e44f29d9bbd57f] 2011-05-18 */
- rc = sqlite3PagerGet(pPager, 1, &pPageOne);
+ rc = sqlite3PagerGet(pPager, 1, &pPageOne, 0);
pList = pPageOne;
pList->pDirty = 0;
}
sqlite3PcacheCleanAll(pPager->pPCache);
}
}else{
+ /* The bBatch boolean is true if the batch-atomic-write commit method
+ ** should be used. No rollback journal is created if batch-atomic-write
+ ** is enabled.
+ */
+ sqlite3_file *fd = pPager->fd;
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ const int bBatch = zMaster==0 /* An SQLITE_IOCAP_BATCH_ATOMIC commit */
+ && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC)
+ && !pPager->noSync
+ && sqlite3JournalIsInMemory(pPager->jfd);
+#else
+# define bBatch 0
+#endif
+
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
/* The following block updates the change-counter. Exactly how it
** does this depends on whether or not the atomic-update optimization
** was enabled at compile time, and if this transaction meets the
** in 'direct' mode. In this case the journal file will never be
** created for this transaction.
*/
- #ifdef SQLITE_ENABLE_ATOMIC_WRITE
- PgHdr *pPg;
- assert( isOpen(pPager->jfd)
- || pPager->journalMode==PAGER_JOURNALMODE_OFF
- || pPager->journalMode==PAGER_JOURNALMODE_WAL
- );
- if( !zMaster && isOpen(pPager->jfd)
- && pPager->journalOff==jrnlBufferSize(pPager)
- && pPager->dbSize>=pPager->dbOrigSize
- && (0==(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
- ){
- /* Update the db file change counter via the direct-write method. The
- ** following call will modify the in-memory representation of page 1
- ** to include the updated change counter and then write page 1
- ** directly to the database file. Because of the atomic-write
- ** property of the host file-system, this is safe.
- */
- rc = pager_incr_changecounter(pPager, 1);
- }else{
- rc = sqlite3JournalCreate(pPager->jfd);
- if( rc==SQLITE_OK ){
- rc = pager_incr_changecounter(pPager, 0);
+ if( bBatch==0 ){
+ PgHdr *pPg;
+ assert( isOpen(pPager->jfd)
+ || pPager->journalMode==PAGER_JOURNALMODE_OFF
+ || pPager->journalMode==PAGER_JOURNALMODE_WAL
+ );
+ if( !zMaster && isOpen(pPager->jfd)
+ && pPager->journalOff==jrnlBufferSize(pPager)
+ && pPager->dbSize>=pPager->dbOrigSize
+ && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty)
+ ){
+ /* Update the db file change counter via the direct-write method. The
+ ** following call will modify the in-memory representation of page 1
+ ** to include the updated change counter and then write page 1
+ ** directly to the database file. Because of the atomic-write
+ ** property of the host file-system, this is safe.
+ */
+ rc = pager_incr_changecounter(pPager, 1);
+ }else{
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc==SQLITE_OK ){
+ rc = pager_incr_changecounter(pPager, 0);
+ }
}
}
- #else
+#else
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ if( zMaster ){
+ rc = sqlite3JournalCreate(pPager->jfd);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
+#endif
rc = pager_incr_changecounter(pPager, 0);
- #endif
+#endif
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
/* Write the master journal name into the journal file. If a master
*/
rc = syncJournal(pPager, 0);
if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
-
+
+ if( bBatch ){
+ /* The pager is now in DBMOD state. But regardless of what happens
+ ** next, attempting to play the journal back into the database would
+ ** be unsafe. Close it now to make sure that does not happen. */
+ sqlite3OsClose(pPager->jfd);
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0);
+ if( rc!=SQLITE_OK ) goto commit_phase_one_exit;
+ }
rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache));
+ if( bBatch ){
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0);
+ }
+ if( rc!=SQLITE_OK ){
+ sqlite3OsFileControlHint(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0);
+ }
+ }
+
if( rc!=SQLITE_OK ){
assert( rc!=SQLITE_IOERR_BLOCKED );
goto commit_phase_one_exit;
*/
pPager->errCode = SQLITE_ABORT;
pPager->eState = PAGER_ERROR;
+ setGetterMethod(pPager);
return rc;
}
}else{
#endif
/*
-** Parameter eStat must be either SQLITE_DBSTATUS_CACHE_HIT or
-** SQLITE_DBSTATUS_CACHE_MISS. Before returning, *pnVal is incremented by the
+** Parameter eStat must be one of SQLITE_DBSTATUS_CACHE_HIT, _MISS, _WRITE,
+** or _WRITE+1. The SQLITE_DBSTATUS_CACHE_WRITE+1 case is a translation
+** of SQLITE_DBSTATUS_CACHE_SPILL. The _SPILL case is not contiguous because
+** it was added later.
+**
+** Before returning, *pnVal is incremented by the
** current cache hit or miss count, according to the value of eStat. If the
** reset parameter is non-zero, the cache hit or miss count is zeroed before
** returning.
assert( eStat==SQLITE_DBSTATUS_CACHE_HIT
|| eStat==SQLITE_DBSTATUS_CACHE_MISS
|| eStat==SQLITE_DBSTATUS_CACHE_WRITE
+ || eStat==SQLITE_DBSTATUS_CACHE_WRITE+1
);
assert( SQLITE_DBSTATUS_CACHE_HIT+1==SQLITE_DBSTATUS_CACHE_MISS );
assert( SQLITE_DBSTATUS_CACHE_HIT+2==SQLITE_DBSTATUS_CACHE_WRITE );
- assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1 && PAGER_STAT_WRITE==2 );
+ assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1
+ && PAGER_STAT_WRITE==2 && PAGER_STAT_SPILL==3 );
- *pnVal += pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT];
+ eStat -= SQLITE_DBSTATUS_CACHE_HIT;
+ *pnVal += pPager->aStat[eStat];
if( reset ){
- pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT] = 0;
+ pPager->aStat[eStat] = 0;
}
}
/*
-** Return true if this is an in-memory pager.
+** Return true if this is an in-memory or temp-file backed pager.
*/
SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager *pPager){
- return MEMDB;
+ return pPager->tempFile;
}
/*
pPager->aSavepoint, sizeof(PagerSavepoint)*nSavepoint
);
if( !aNew ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset(&aNew[nCurrent], 0, (nSavepoint-nCurrent) * sizeof(PagerSavepoint));
pPager->aSavepoint = aNew;
aNew[ii].iSubRec = pPager->nSubRec;
aNew[ii].pInSavepoint = sqlite3BitvecCreate(pPager->dbSize);
if( !aNew[ii].pInSavepoint ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
if( pagerUseWal(pPager) ){
sqlite3WalSavepoint(pPager->pWal, aNew[ii].aWalData);
** savepoint. If no errors occur, SQLITE_OK is returned.
*/
SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint){
- int rc = pPager->errCode; /* Return code */
+ int rc = pPager->errCode;
+
+#ifdef SQLITE_ENABLE_ZIPVFS
+ if( op==SAVEPOINT_RELEASE ) rc = SQLITE_OK;
+#endif
assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
assert( iSavepoint>=0 || op==SAVEPOINT_ROLLBACK );
if( op==SAVEPOINT_RELEASE ){
if( nNew==0 && isOpen(pPager->sjfd) ){
/* Only truncate if it is an in-memory sub-journal. */
- if( sqlite3IsMemJournal(pPager->sjfd) ){
+ if( sqlite3JournalIsInMemory(pPager->sjfd) ){
rc = sqlite3OsTruncate(pPager->sjfd, 0);
assert( rc==SQLITE_OK );
}
rc = pagerPlaybackSavepoint(pPager, pSavepoint);
assert(rc!=SQLITE_DONE);
}
+
+#ifdef SQLITE_ENABLE_ZIPVFS
+ /* If the cache has been modified but the savepoint cannot be rolled
+ ** back journal_mode=off, put the pager in the error state. This way,
+ ** if the VFS used by this pager includes ZipVFS, the entire transaction
+ ** can be rolled back at the ZipVFS level. */
+ else if(
+ pPager->journalMode==PAGER_JOURNALMODE_OFF
+ && pPager->eState>=PAGER_WRITER_CACHEMOD
+ ){
+ pPager->errCode = SQLITE_ABORT;
+ pPager->eState = PAGER_ERROR;
+ setGetterMethod(pPager);
+ }
+#endif
}
return rc;
/*
** Return the VFS structure for the pager.
*/
-SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager *pPager){
+SQLITE_PRIVATE sqlite3_vfs *sqlite3PagerVfs(Pager *pPager){
return pPager->pVfs;
}
return pPager->fd;
}
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
/*
-** Return the full pathname of the journal file.
+** Reset the lock timeout for pager.
*/
-SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager *pPager){
- return pPager->zJournal;
+SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager){
+ int x = 0;
+ sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_LOCK_TIMEOUT, &x);
}
+#endif
/*
-** Return true if fsync() calls are disabled for this pager. Return FALSE
-** if fsync()s are executed normally.
+** Return the file handle for the journal file (if it exists).
+** This will be either the rollback journal or the WAL file.
*/
-SQLITE_PRIVATE int sqlite3PagerNosync(Pager *pPager){
- return pPager->noSync;
+SQLITE_PRIVATE sqlite3_file *sqlite3PagerJrnlFile(Pager *pPager){
+#if SQLITE_OMIT_WAL
+ return pPager->jfd;
+#else
+ return pPager->pWal ? sqlite3WalFile(pPager->pWal) : pPager->jfd;
+#endif
+}
+
+/*
+** Return the full pathname of the journal file.
+*/
+SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager *pPager){
+ return pPager->zJournal;
}
#ifdef SQLITE_HAS_CODEC
pPager->xCodecSizeChng = xCodecSizeChng;
pPager->xCodecFree = xCodecFree;
pPager->pCodec = pCodec;
+ setGetterMethod(pPager);
pagerReportSize(pPager);
}
SQLITE_PRIVATE void *sqlite3PagerGetCodec(Pager *pPager){
/* In order to be able to rollback, an in-memory database must journal
** the page we are moving from.
*/
- if( MEMDB ){
+ assert( pPager->tempFile || !MEMDB );
+ if( pPager->tempFile ){
rc = sqlite3PagerWrite(pPg);
if( rc ) return rc;
}
assert( !pPgOld || pPgOld->nRef==1 );
if( pPgOld ){
pPg->flags |= (pPgOld->flags&PGHDR_NEED_SYNC);
- if( MEMDB ){
+ if( pPager->tempFile ){
/* Do not discard pages from an in-memory database since we might
** need to rollback later. Just move the page out of the way. */
sqlite3PcacheMove(pPgOld, pPager->dbSize+1);
** to exist, in case the transaction needs to roll back. Use pPgOld
** as the original page since it has already been allocated.
*/
- if( MEMDB ){
- assert( pPgOld );
+ if( pPager->tempFile && pPgOld ){
sqlite3PcacheMove(pPgOld, origPgno);
sqlite3PagerUnrefNotNull(pPgOld);
}
** the journal file twice, but that is not a problem.
*/
PgHdr *pPgHdr;
- rc = sqlite3PagerGet(pPager, needSyncPgno, &pPgHdr);
+ rc = sqlite3PagerGet(pPager, needSyncPgno, &pPgHdr, 0);
if( rc!=SQLITE_OK ){
if( needSyncPgno<=pPager->dbOrigSize ){
assert( pPager->pTmpSpace!=0 );
** Unless this is an in-memory or temporary database, clear the pager cache.
*/
SQLITE_PRIVATE void sqlite3PagerClearCache(Pager *pPager){
- if( !MEMDB && pPager->tempFile==0 ) pager_reset(pPager);
+ assert( MEMDB==0 || pPager->tempFile );
+ if( pPager->tempFile==0 ) pager_reset(pPager);
}
#endif
+
#ifndef SQLITE_OMIT_WAL
/*
** This function is called when the user invokes "PRAGMA wal_checkpoint",
**
** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART.
*/
-SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int eMode, int *pnLog, int *pnCkpt){
+SQLITE_PRIVATE int sqlite3PagerCheckpoint(
+ Pager *pPager, /* Checkpoint on this pager */
+ sqlite3 *db, /* Db handle used to check for interrupts */
+ int eMode, /* Type of checkpoint */
+ int *pnLog, /* OUT: Final number of frames in log */
+ int *pnCkpt /* OUT: Final number of checkpointed frames */
+){
int rc = SQLITE_OK;
if( pPager->pWal ){
- rc = sqlite3WalCheckpoint(pPager->pWal, eMode,
+ rc = sqlite3WalCheckpoint(pPager->pWal, db, eMode,
(eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler),
pPager->pBusyHandlerArg,
- pPager->ckptSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace,
+ pPager->walSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace,
pnLog, pnCkpt
);
+ sqlite3PagerResetLockTimeout(pPager);
}
return rc;
}
*/
SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager){
const sqlite3_io_methods *pMethods = pPager->fd->pMethods;
+ if( pPager->noLock ) return 0;
return pPager->exclusiveMode || (pMethods->iVersion>=2 && pMethods->xShmMap);
}
** error (SQLITE_BUSY) is returned and the log connection is not closed.
** If successful, the EXCLUSIVE lock is not released before returning.
*/
-SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager){
+SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){
int rc = SQLITE_OK;
assert( pPager->journalMode==PAGER_JOURNALMODE_WAL );
if( rc==SQLITE_OK && pPager->pWal ){
rc = pagerExclusiveLock(pPager);
if( rc==SQLITE_OK ){
- rc = sqlite3WalClose(pPager->pWal, pPager->ckptSyncFlags,
+ rc = sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags,
pPager->pageSize, (u8*)pPager->pTmpSpace);
pPager->pWal = 0;
pagerFixMaplimit(pPager);
+ if( rc && !pPager->exclusiveMode ) pagerUnlockDb(pPager, SHARED_LOCK);
}
}
return rc;
}
+#ifdef SQLITE_ENABLE_SNAPSHOT
+/*
+** If this is a WAL database, obtain a snapshot handle for the snapshot
+** currently open. Otherwise, return an error.
+*/
+SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot){
+ int rc = SQLITE_ERROR;
+ if( pPager->pWal ){
+ rc = sqlite3WalSnapshotGet(pPager->pWal, ppSnapshot);
+ }
+ return rc;
+}
+
+/*
+** If this is a WAL database, store a pointer to pSnapshot. Next time a
+** read transaction is opened, attempt to read from the snapshot it
+** identifies. If this is not a WAL database, return an error.
+*/
+SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot){
+ int rc = SQLITE_OK;
+ if( pPager->pWal ){
+ sqlite3WalSnapshotOpen(pPager->pWal, pSnapshot);
+ }else{
+ rc = SQLITE_ERROR;
+ }
+ return rc;
+}
+
+/*
+** If this is a WAL database, call sqlite3WalSnapshotRecover(). If this
+** is not a WAL database, return an error.
+*/
+SQLITE_PRIVATE int sqlite3PagerSnapshotRecover(Pager *pPager){
+ int rc;
+ if( pPager->pWal ){
+ rc = sqlite3WalSnapshotRecover(pPager->pWal);
+ }else{
+ rc = SQLITE_ERROR;
+ }
+ return rc;
+}
+#endif /* SQLITE_ENABLE_SNAPSHOT */
#endif /* !SQLITE_OMIT_WAL */
#ifdef SQLITE_ENABLE_ZIPVFS
}
#endif
-
#endif /* SQLITE_OMIT_DISKIO */
/************** End of pager.c ***********************************************/
** on a network filesystem. All users of the database must be able to
** share memory.
**
+** In the default unix and windows implementation, the wal-index is a mmapped
+** file whose name is the database name with a "-shm" suffix added. For that
+** reason, the wal-index is sometimes called the "shm" file.
+**
** The wal-index is transient. After a crash, the wal-index can (and should
** be) reconstructed from the original WAL file. In fact, the VFS is required
** to either truncate or zero the header of the wal-index when the last
#define WALINDEX_MAX_VERSION 3007000
/*
-** Indices of various locking bytes. WAL_NREADER is the number
-** of available reader locks and should be at least 3.
+** Index numbers for various locking bytes. WAL_NREADER is the number
+** of available reader locks and should be at least 3. The default
+** is SQLITE_SHM_NLOCK==8 and WAL_NREADER==5.
+**
+** Technically, the various VFSes are free to implement these locks however
+** they see fit. However, compatibility is encouraged so that VFSes can
+** interoperate. The standard implemention used on both unix and windows
+** is for the index number to indicate a byte offset into the
+** WalCkptInfo.aLock[] array in the wal-index header. In other words, all
+** locks are on the shm file. The WALINDEX_LOCK_OFFSET constant (which
+** should be 120) is the location in the shm file for the first locking
+** byte.
*/
#define WAL_WRITE_LOCK 0
#define WAL_ALL_BUT_WRITE 1
** The following object holds a copy of the wal-index header content.
**
** The actual header in the wal-index consists of two copies of this
-** object.
+** object followed by one instance of the WalCkptInfo object.
+** For all versions of SQLite through 3.10.0 and probably beyond,
+** the locking bytes (WalCkptInfo.aLock) start at offset 120 and
+** the total header size is 136 bytes.
**
** The szPage value can be any power of 2 between 512 and 32768, inclusive.
** Or it can be 1 to represent a 65536-byte page. The latter case was
** However, a WAL_WRITE_LOCK thread can move the value of nBackfill from
** mxFrame back to zero when the WAL is reset.
**
+** nBackfillAttempted is the largest value of nBackfill that a checkpoint
+** has attempted to achieve. Normally nBackfill==nBackfillAtempted, however
+** the nBackfillAttempted is set before any backfilling is done and the
+** nBackfill is only set after all backfilling completes. So if a checkpoint
+** crashes, nBackfillAttempted might be larger than nBackfill. The
+** WalIndexHdr.mxFrame must never be less than nBackfillAttempted.
+**
+** The aLock[] field is a set of bytes used for locking. These bytes should
+** never be read or written.
+**
** There is one entry in aReadMark[] for each reader lock. If a reader
** holds read-lock K, then the value in aReadMark[K] is no greater than
** the mxFrame for that reader. The value READMARK_NOT_USED (0xffffffff)
struct WalCkptInfo {
u32 nBackfill; /* Number of WAL frames backfilled into DB */
u32 aReadMark[WAL_NREADER]; /* Reader marks */
+ u8 aLock[SQLITE_SHM_NLOCK]; /* Reserved space for locks */
+ u32 nBackfillAttempted; /* WAL frames perhaps written, or maybe not */
+ u32 notUsed0; /* Available for future enhancements */
};
#define READMARK_NOT_USED 0xffffffff
** only support mandatory file-locks, we do not read or write data
** from the region of the file on which locks are applied.
*/
-#define WALINDEX_LOCK_OFFSET (sizeof(WalIndexHdr)*2 + sizeof(WalCkptInfo))
-#define WALINDEX_LOCK_RESERVED 16
-#define WALINDEX_HDR_SIZE (WALINDEX_LOCK_OFFSET+WALINDEX_LOCK_RESERVED)
+#define WALINDEX_LOCK_OFFSET (sizeof(WalIndexHdr)*2+offsetof(WalCkptInfo,aLock))
+#define WALINDEX_HDR_SIZE (sizeof(WalIndexHdr)*2+sizeof(WalCkptInfo))
/* Size of header before each frame in wal */
#define WAL_FRAME_HDRSIZE 24
/* Size of write ahead log header, including checksum. */
-/* #define WAL_HDRSIZE 24 */
#define WAL_HDRSIZE 32
/* WAL magic value. Either this value, or the same value with the least
u8 truncateOnCommit; /* True to truncate WAL file on commit */
u8 syncHeader; /* Fsync the WAL header if true */
u8 padToSectorBoundary; /* Pad transactions out to the next sector */
+ u8 bShmUnreliable; /* SHM content is read-only and unreliable */
WalIndexHdr hdr; /* Wal-index header for current transaction */
u32 minFrame; /* Ignore wal frames before this one */
+ u32 iReCksum; /* On commit, recalculate checksums from here */
const char *zWalName; /* Name of WAL file */
u32 nCkpt; /* Checkpoint sequence counter in the wal-header */
#ifdef SQLITE_DEBUG
u8 lockError; /* True if a locking error has occurred */
#endif
+#ifdef SQLITE_ENABLE_SNAPSHOT
+ WalIndexHdr *pSnapshot; /* Start transaction here if not NULL */
+#endif
};
/*
** is broken into pages of WALINDEX_PGSZ bytes. Wal-index pages are
** numbered from zero.
**
+** If the wal-index is currently smaller the iPage pages then the size
+** of the wal-index might be increased, but only if it is safe to do
+** so. It is safe to enlarge the wal-index if pWal->writeLock is true
+** or pWal->exclusiveMode==WAL_HEAPMEMORY_MODE.
+**
** If this call is successful, *ppPage is set to point to the wal-index
** page and SQLITE_OK is returned. If an error (an OOM or VFS error) occurs,
** then an SQLite error code is returned and *ppPage is set to 0.
*/
-static int walIndexPage(Wal *pWal, int iPage, volatile u32 **ppPage){
+static SQLITE_NOINLINE int walIndexPageRealloc(
+ Wal *pWal, /* The WAL context */
+ int iPage, /* The page we seek */
+ volatile u32 **ppPage /* Write the page pointer here */
+){
int rc = SQLITE_OK;
/* Enlarge the pWal->apWiData[] array if required */
apNew = (volatile u32 **)sqlite3_realloc64((void *)pWal->apWiData, nByte);
if( !apNew ){
*ppPage = 0;
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset((void*)&apNew[pWal->nWiData], 0,
sizeof(u32*)*(iPage+1-pWal->nWiData));
}
/* Request a pointer to the required page from the VFS */
- if( pWal->apWiData[iPage]==0 ){
- if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){
- pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ);
- if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM;
- }else{
- rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ,
- pWal->writeLock, (void volatile **)&pWal->apWiData[iPage]
- );
+ assert( pWal->apWiData[iPage]==0 );
+ if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){
+ pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ);
+ if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM_BKPT;
+ }else{
+ rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ,
+ pWal->writeLock, (void volatile **)&pWal->apWiData[iPage]
+ );
+ assert( pWal->apWiData[iPage]!=0 || rc!=SQLITE_OK || pWal->writeLock==0 );
+ testcase( pWal->apWiData[iPage]==0 && rc==SQLITE_OK );
+ if( (rc&0xff)==SQLITE_READONLY ){
+ pWal->readOnly |= WAL_SHM_RDONLY;
if( rc==SQLITE_READONLY ){
- pWal->readOnly |= WAL_SHM_RDONLY;
rc = SQLITE_OK;
}
}
assert( iPage==0 || *ppPage || rc!=SQLITE_OK );
return rc;
}
+static int walIndexPage(
+ Wal *pWal, /* The WAL context */
+ int iPage, /* The page we seek */
+ volatile u32 **ppPage /* Write the page pointer here */
+){
+ if( pWal->nWiData<=iPage || (*ppPage = pWal->apWiData[iPage])==0 ){
+ return walIndexPageRealloc(pWal, iPage, ppPage);
+ }
+ return SQLITE_OK;
+}
/*
** Return a pointer to the WalCkptInfo structure in the wal-index.
assert( WAL_FRAME_HDRSIZE==24 );
sqlite3Put4byte(&aFrame[0], iPage);
sqlite3Put4byte(&aFrame[4], nTruncate);
- memcpy(&aFrame[8], pWal->hdr.aSalt, 8);
+ if( pWal->iReCksum==0 ){
+ memcpy(&aFrame[8], pWal->hdr.aSalt, 8);
- nativeCksum = (pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN);
- walChecksumBytes(nativeCksum, aFrame, 8, aCksum, aCksum);
- walChecksumBytes(nativeCksum, aData, pWal->szPage, aCksum, aCksum);
+ nativeCksum = (pWal->hdr.bigEndCksum==SQLITE_BIGENDIAN);
+ walChecksumBytes(nativeCksum, aFrame, 8, aCksum, aCksum);
+ walChecksumBytes(nativeCksum, aData, pWal->szPage, aCksum, aCksum);
- sqlite3Put4byte(&aFrame[16], aCksum[0]);
- sqlite3Put4byte(&aFrame[20], aCksum[1]);
+ sqlite3Put4byte(&aFrame[16], aCksum[0]);
+ sqlite3Put4byte(&aFrame[20], aCksum[1]);
+ }else{
+ memset(&aFrame[8], 0, 16);
+ }
}
/*
SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED);
WALTRACE(("WAL%p: release SHARED-%s\n", pWal, walLockName(lockIdx)));
}
-static int walLockExclusive(Wal *pWal, int lockIdx, int n, int fBlock){
+static int walLockExclusive(Wal *pWal, int lockIdx, int n){
int rc;
if( pWal->exclusiveMode ) return SQLITE_OK;
- if( fBlock ) sqlite3OsFileControl(pWal->pDbFd, SQLITE_FCNTL_WAL_BLOCK, 0);
rc = sqlite3OsShmLock(pWal->pDbFd, lockIdx, n,
SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE);
WALTRACE(("WAL%p: acquire EXCLUSIVE-%s cnt=%d %s\n", pWal,
i64 nSize; /* Size of log file */
u32 aFrameCksum[2] = {0, 0};
int iLock; /* Lock offset to lock for checkpoint */
- int nLock; /* Number of locks to hold */
/* Obtain an exclusive lock on all byte in the locking range not already
** locked by the caller. The caller is guaranteed to have locked the
assert( WAL_CKPT_LOCK==WAL_ALL_BUT_WRITE );
assert( pWal->writeLock );
iLock = WAL_ALL_BUT_WRITE + pWal->ckptLock;
- nLock = SQLITE_SHM_NLOCK - iLock;
- rc = walLockExclusive(pWal, iLock, nLock, 0);
+ rc = walLockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock);
+ if( rc==SQLITE_OK ){
+ rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
+ if( rc!=SQLITE_OK ){
+ walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock);
+ }
+ }
if( rc ){
return rc;
}
+
WALTRACE(("WAL%p: recovery begin...\n", pWal));
memset(&pWal->hdr, 0, sizeof(WalIndexHdr));
szFrame = szPage + WAL_FRAME_HDRSIZE;
aFrame = (u8 *)sqlite3_malloc64(szFrame);
if( !aFrame ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto recovery_error;
}
aData = &aFrame[WAL_FRAME_HDRSIZE];
*/
pInfo = walCkptInfo(pWal);
pInfo->nBackfill = 0;
+ pInfo->nBackfillAttempted = pWal->hdr.mxFrame;
pInfo->aReadMark[0] = 0;
for(i=1; i<WAL_NREADER; i++) pInfo->aReadMark[i] = READMARK_NOT_USED;
if( pWal->hdr.mxFrame ) pInfo->aReadMark[1] = pWal->hdr.mxFrame;
recovery_error:
WALTRACE(("WAL%p: recovery %s\n", pWal, rc ? "failed" : "ok"));
- walUnlockExclusive(pWal, iLock, nLock);
+ walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock);
+ walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
return rc;
}
** Close an open wal-index.
*/
static void walIndexClose(Wal *pWal, int isDelete){
- if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){
+ if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE || pWal->bShmUnreliable ){
int i;
for(i=0; i<pWal->nWiData; i++){
sqlite3_free((void *)pWal->apWiData[i]);
pWal->apWiData[i] = 0;
}
- }else{
+ }
+ if( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE ){
sqlite3OsShmUnmap(pWal->pDbFd, isDelete);
}
}
/* In the amalgamation, the os_unix.c and os_win.c source files come before
** this source file. Verify that the #defines of the locking byte offsets
** in os_unix.c and os_win.c agree with the WALINDEX_LOCK_OFFSET value.
+ ** For that matter, if the lock offset ever changes from its initial design
+ ** value of 120, we need to know that so there is an assert() to check it.
*/
+ assert( 120==WALINDEX_LOCK_OFFSET );
+ assert( 136==WALINDEX_HDR_SIZE );
#ifdef WIN_SHM_BASE
assert( WIN_SHM_BASE==WALINDEX_LOCK_OFFSET );
#endif
*ppWal = 0;
pRet = (Wal*)sqlite3MallocZero(sizeof(Wal) + pVfs->szOsFile);
if( !pRet ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pRet->pVfs = pVfs;
/*
** Construct a WalInterator object that can be used to loop over all
-** pages in the WAL in ascending order. The caller must hold the checkpoint
-** lock.
+** pages in the WAL following frame nBackfill in ascending order. Frames
+** nBackfill or earlier may be included - excluding them is an optimization
+** only. The caller must hold the checkpoint lock.
**
** On success, make *pp point to the newly allocated WalInterator object
** return SQLITE_OK. Otherwise, return an error code. If this routine
** The calling routine should invoke walIteratorFree() to destroy the
** WalIterator object when it has finished with it.
*/
-static int walIteratorInit(Wal *pWal, WalIterator **pp){
+static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){
WalIterator *p; /* Return value */
int nSegment; /* Number of segments to merge */
u32 iLast; /* Last frame in log */
+ iLast*sizeof(ht_slot);
p = (WalIterator *)sqlite3_malloc64(nByte);
if( !p ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset(p, 0, nByte);
p->nSegment = nSegment;
sizeof(ht_slot) * (iLast>HASHTABLE_NPAGE?HASHTABLE_NPAGE:iLast)
);
if( !aTmp ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
- for(i=0; rc==SQLITE_OK && i<nSegment; i++){
+ for(i=walFramePage(nBackfill+1); rc==SQLITE_OK && i<nSegment; i++){
volatile ht_slot *aHash;
u32 iZero;
volatile u32 *aPgno;
if( rc!=SQLITE_OK ){
walIteratorFree(p);
+ p = 0;
}
*pp = p;
return rc;
){
int rc;
do {
- rc = walLockExclusive(pWal, lockIdx, n, 0);
+ rc = walLockExclusive(pWal, lockIdx, n);
}while( xBusy && rc==SQLITE_BUSY && xBusy(pBusyArg) );
return rc;
}
memcpy(&pWal->hdr.aSalt[1], &salt1, 4);
walIndexWriteHdr(pWal);
pInfo->nBackfill = 0;
+ pInfo->nBackfillAttempted = 0;
pInfo->aReadMark[1] = 0;
for(i=2; i<WAL_NREADER; i++) pInfo->aReadMark[i] = READMARK_NOT_USED;
assert( pInfo->aReadMark[0]==0 );
*/
static int walCheckpoint(
Wal *pWal, /* Wal connection */
+ sqlite3 *db, /* Check for interrupts on this handle */
int eMode, /* One of PASSIVE, FULL or RESTART */
int (*xBusy)(void*), /* Function to call when busy */
void *pBusyArg, /* Context argument for xBusyHandler */
pInfo = walCkptInfo(pWal);
if( pInfo->nBackfill<pWal->hdr.mxFrame ){
- /* Allocate the iterator */
- rc = walIteratorInit(pWal, &pIter);
- if( rc!=SQLITE_OK ){
- return rc;
- }
- assert( pIter );
-
/* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked
** in the SQLITE_CHECKPOINT_PASSIVE mode. */
assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 );
}
}
- if( pInfo->nBackfill<mxSafeFrame
+ /* Allocate the iterator */
+ if( pInfo->nBackfill<mxSafeFrame ){
+ rc = walIteratorInit(pWal, pInfo->nBackfill, &pIter);
+ assert( rc==SQLITE_OK || pIter==0 );
+ }
+
+ if( pIter
&& (rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(0),1))==SQLITE_OK
){
i64 nSize; /* Current size of database file */
u32 nBackfill = pInfo->nBackfill;
+ pInfo->nBackfillAttempted = mxSafeFrame;
+
/* Sync the WAL to disk */
- if( sync_flags ){
- rc = sqlite3OsSync(pWal->pWalFd, sync_flags);
- }
+ rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags));
/* If the database may grow as a result of this checkpoint, hint
** about the eventual size of the db file to the VFS layer.
while( rc==SQLITE_OK && 0==walIteratorNext(pIter, &iDbpage, &iFrame) ){
i64 iOffset;
assert( walFramePgno(pWal, iFrame)==iDbpage );
+ if( db->u1.isInterrupted ){
+ rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_INTERRUPT;
+ break;
+ }
if( iFrame<=nBackfill || iFrame>mxSafeFrame || iDbpage>mxPage ){
continue;
}
i64 szDb = pWal->hdr.nPage*(i64)szPage;
testcase( IS_BIG_INT(szDb) );
rc = sqlite3OsTruncate(pWal->pDbFd, szDb);
- if( rc==SQLITE_OK && sync_flags ){
- rc = sqlite3OsSync(pWal->pDbFd, sync_flags);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsSync(pWal->pDbFd, CKPT_SYNC_FLAGS(sync_flags));
}
}
if( rc==SQLITE_OK ){
*/
SQLITE_PRIVATE int sqlite3WalClose(
Wal *pWal, /* Wal to close */
+ sqlite3 *db, /* For interrupt flag */
int sync_flags, /* Flags to pass to OsSync() (or 0) */
int nBuf,
u8 *zBuf /* Buffer of at least nBuf bytes */
**
** The EXCLUSIVE lock is not released before returning.
*/
- rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE);
- if( rc==SQLITE_OK ){
+ if( zBuf!=0
+ && SQLITE_OK==(rc = sqlite3OsLock(pWal->pDbFd, SQLITE_LOCK_EXCLUSIVE))
+ ){
if( pWal->exclusiveMode==WAL_NORMAL_MODE ){
pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
}
- rc = sqlite3WalCheckpoint(
- pWal, SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0
+ rc = sqlite3WalCheckpoint(pWal, db,
+ SQLITE_CHECKPOINT_PASSIVE, 0, 0, sync_flags, nBuf, zBuf, 0, 0
);
if( rc==SQLITE_OK ){
int bPersist = -1;
return 0;
}
+/*
+** This is the value that walTryBeginRead returns when it needs to
+** be retried.
+*/
+#define WAL_RETRY (-1)
+
/*
** Read the wal-index header from the wal-index and into pWal->hdr.
** If the wal-header appears to be corrupt, try to reconstruct the
assert( pChanged );
rc = walIndexPage(pWal, 0, &page0);
if( rc!=SQLITE_OK ){
- return rc;
- };
- assert( page0 || pWal->writeLock==0 );
+ assert( rc!=SQLITE_READONLY ); /* READONLY changed to OK in walIndexPage */
+ if( rc==SQLITE_READONLY_CANTINIT ){
+ /* The SQLITE_READONLY_CANTINIT return means that the shared-memory
+ ** was openable but is not writable, and this thread is unable to
+ ** confirm that another write-capable connection has the shared-memory
+ ** open, and hence the content of the shared-memory is unreliable,
+ ** since the shared-memory might be inconsistent with the WAL file
+ ** and there is no writer on hand to fix it. */
+ assert( page0==0 );
+ assert( pWal->writeLock==0 );
+ assert( pWal->readOnly & WAL_SHM_RDONLY );
+ pWal->bShmUnreliable = 1;
+ pWal->exclusiveMode = WAL_HEAPMEMORY_MODE;
+ *pChanged = 1;
+ }else{
+ return rc; /* Any other non-OK return is just an error */
+ }
+ }else{
+ /* page0 can be NULL if the SHM is zero bytes in size and pWal->writeLock
+ ** is zero, which prevents the SHM from growing */
+ testcase( page0!=0 );
+ }
+ assert( page0!=0 || pWal->writeLock==0 );
/* If the first page of the wal-index has been mapped, try to read the
** wal-index header immediately, without holding any lock. This usually
*/
assert( badHdr==0 || pWal->writeLock==0 );
if( badHdr ){
- if( pWal->readOnly & WAL_SHM_RDONLY ){
+ if( pWal->bShmUnreliable==0 && (pWal->readOnly & WAL_SHM_RDONLY) ){
if( SQLITE_OK==(rc = walLockShared(pWal, WAL_WRITE_LOCK)) ){
walUnlockShared(pWal, WAL_WRITE_LOCK);
rc = SQLITE_READONLY_RECOVERY;
}
- }else if( SQLITE_OK==(rc = walLockExclusive(pWal, WAL_WRITE_LOCK, 1, 1)) ){
+ }else if( SQLITE_OK==(rc = walLockExclusive(pWal, WAL_WRITE_LOCK, 1)) ){
pWal->writeLock = 1;
if( SQLITE_OK==(rc = walIndexPage(pWal, 0, &page0)) ){
badHdr = walIndexTryHdr(pWal, pChanged);
if( badHdr==0 && pWal->hdr.iVersion!=WALINDEX_MAX_VERSION ){
rc = SQLITE_CANTOPEN_BKPT;
}
+ if( pWal->bShmUnreliable ){
+ if( rc!=SQLITE_OK ){
+ walIndexClose(pWal, 0);
+ pWal->bShmUnreliable = 0;
+ assert( pWal->nWiData>0 && pWal->apWiData[0]==0 );
+ /* walIndexRecover() might have returned SHORT_READ if a concurrent
+ ** writer truncated the WAL out from under it. If that happens, it
+ ** indicates that a writer has fixed the SHM file for us, so retry */
+ if( rc==SQLITE_IOERR_SHORT_READ ) rc = WAL_RETRY;
+ }
+ pWal->exclusiveMode = WAL_NORMAL_MODE;
+ }
return rc;
}
/*
-** This is the value that walTryBeginRead returns when it needs to
-** be retried.
+** Open a transaction in a connection where the shared-memory is read-only
+** and where we cannot verify that there is a separate write-capable connection
+** on hand to keep the shared-memory up-to-date with the WAL file.
+**
+** This can happen, for example, when the shared-memory is implemented by
+** memory-mapping a *-shm file, where a prior writer has shut down and
+** left the *-shm file on disk, and now the present connection is trying
+** to use that database but lacks write permission on the *-shm file.
+** Other scenarios are also possible, depending on the VFS implementation.
+**
+** Precondition:
+**
+** The *-wal file has been read and an appropriate wal-index has been
+** constructed in pWal->apWiData[] using heap memory instead of shared
+** memory.
+**
+** If this function returns SQLITE_OK, then the read transaction has
+** been successfully opened. In this case output variable (*pChanged)
+** is set to true before returning if the caller should discard the
+** contents of the page cache before proceeding. Or, if it returns
+** WAL_RETRY, then the heap memory wal-index has been discarded and
+** the caller should retry opening the read transaction from the
+** beginning (including attempting to map the *-shm file).
+**
+** If an error occurs, an SQLite error code is returned.
*/
-#define WAL_RETRY (-1)
+static int walBeginShmUnreliable(Wal *pWal, int *pChanged){
+ i64 szWal; /* Size of wal file on disk in bytes */
+ i64 iOffset; /* Current offset when reading wal file */
+ u8 aBuf[WAL_HDRSIZE]; /* Buffer to load WAL header into */
+ u8 *aFrame = 0; /* Malloc'd buffer to load entire frame */
+ int szFrame; /* Number of bytes in buffer aFrame[] */
+ u8 *aData; /* Pointer to data part of aFrame buffer */
+ volatile void *pDummy; /* Dummy argument for xShmMap */
+ int rc; /* Return code */
+ u32 aSaveCksum[2]; /* Saved copy of pWal->hdr.aFrameCksum */
+
+ assert( pWal->bShmUnreliable );
+ assert( pWal->readOnly & WAL_SHM_RDONLY );
+ assert( pWal->nWiData>0 && pWal->apWiData[0] );
+
+ /* Take WAL_READ_LOCK(0). This has the effect of preventing any
+ ** writers from running a checkpoint, but does not stop them
+ ** from running recovery. */
+ rc = walLockShared(pWal, WAL_READ_LOCK(0));
+ if( rc!=SQLITE_OK ){
+ if( rc==SQLITE_BUSY ) rc = WAL_RETRY;
+ goto begin_unreliable_shm_out;
+ }
+ pWal->readLock = 0;
+
+ /* Check to see if a separate writer has attached to the shared-memory area,
+ ** thus making the shared-memory "reliable" again. Do this by invoking
+ ** the xShmMap() routine of the VFS and looking to see if the return
+ ** is SQLITE_READONLY instead of SQLITE_READONLY_CANTINIT.
+ **
+ ** If the shared-memory is now "reliable" return WAL_RETRY, which will
+ ** cause the heap-memory WAL-index to be discarded and the actual
+ ** shared memory to be used in its place.
+ **
+ ** This step is important because, even though this connection is holding
+ ** the WAL_READ_LOCK(0) which prevents a checkpoint, a writer might
+ ** have already checkpointed the WAL file and, while the current
+ ** is active, wrap the WAL and start overwriting frames that this
+ ** process wants to use.
+ **
+ ** Once sqlite3OsShmMap() has been called for an sqlite3_file and has
+ ** returned any SQLITE_READONLY value, it must return only SQLITE_READONLY
+ ** or SQLITE_READONLY_CANTINIT or some error for all subsequent invocations,
+ ** even if some external agent does a "chmod" to make the shared-memory
+ ** writable by us, until sqlite3OsShmUnmap() has been called.
+ ** This is a requirement on the VFS implementation.
+ */
+ rc = sqlite3OsShmMap(pWal->pDbFd, 0, WALINDEX_PGSZ, 0, &pDummy);
+ assert( rc!=SQLITE_OK ); /* SQLITE_OK not possible for read-only connection */
+ if( rc!=SQLITE_READONLY_CANTINIT ){
+ rc = (rc==SQLITE_READONLY ? WAL_RETRY : rc);
+ goto begin_unreliable_shm_out;
+ }
+
+ /* We reach this point only if the real shared-memory is still unreliable.
+ ** Assume the in-memory WAL-index substitute is correct and load it
+ ** into pWal->hdr.
+ */
+ memcpy(&pWal->hdr, (void*)walIndexHdr(pWal), sizeof(WalIndexHdr));
+
+ /* Make sure some writer hasn't come in and changed the WAL file out
+ ** from under us, then disconnected, while we were not looking.
+ */
+ rc = sqlite3OsFileSize(pWal->pWalFd, &szWal);
+ if( rc!=SQLITE_OK ){
+ goto begin_unreliable_shm_out;
+ }
+ if( szWal<WAL_HDRSIZE ){
+ /* If the wal file is too small to contain a wal-header and the
+ ** wal-index header has mxFrame==0, then it must be safe to proceed
+ ** reading the database file only. However, the page cache cannot
+ ** be trusted, as a read/write connection may have connected, written
+ ** the db, run a checkpoint, truncated the wal file and disconnected
+ ** since this client's last read transaction. */
+ *pChanged = 1;
+ rc = (pWal->hdr.mxFrame==0 ? SQLITE_OK : WAL_RETRY);
+ goto begin_unreliable_shm_out;
+ }
+
+ /* Check the salt keys at the start of the wal file still match. */
+ rc = sqlite3OsRead(pWal->pWalFd, aBuf, WAL_HDRSIZE, 0);
+ if( rc!=SQLITE_OK ){
+ goto begin_unreliable_shm_out;
+ }
+ if( memcmp(&pWal->hdr.aSalt, &aBuf[16], 8) ){
+ /* Some writer has wrapped the WAL file while we were not looking.
+ ** Return WAL_RETRY which will cause the in-memory WAL-index to be
+ ** rebuilt. */
+ rc = WAL_RETRY;
+ goto begin_unreliable_shm_out;
+ }
+
+ /* Allocate a buffer to read frames into */
+ szFrame = pWal->hdr.szPage + WAL_FRAME_HDRSIZE;
+ aFrame = (u8 *)sqlite3_malloc64(szFrame);
+ if( aFrame==0 ){
+ rc = SQLITE_NOMEM_BKPT;
+ goto begin_unreliable_shm_out;
+ }
+ aData = &aFrame[WAL_FRAME_HDRSIZE];
+
+ /* Check to see if a complete transaction has been appended to the
+ ** wal file since the heap-memory wal-index was created. If so, the
+ ** heap-memory wal-index is discarded and WAL_RETRY returned to
+ ** the caller. */
+ aSaveCksum[0] = pWal->hdr.aFrameCksum[0];
+ aSaveCksum[1] = pWal->hdr.aFrameCksum[1];
+ for(iOffset=walFrameOffset(pWal->hdr.mxFrame+1, pWal->hdr.szPage);
+ iOffset+szFrame<=szWal;
+ iOffset+=szFrame
+ ){
+ u32 pgno; /* Database page number for frame */
+ u32 nTruncate; /* dbsize field from frame header */
+
+ /* Read and decode the next log frame. */
+ rc = sqlite3OsRead(pWal->pWalFd, aFrame, szFrame, iOffset);
+ if( rc!=SQLITE_OK ) break;
+ if( !walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame) ) break;
+
+ /* If nTruncate is non-zero, then a complete transaction has been
+ ** appended to this wal file. Set rc to WAL_RETRY and break out of
+ ** the loop. */
+ if( nTruncate ){
+ rc = WAL_RETRY;
+ break;
+ }
+ }
+ pWal->hdr.aFrameCksum[0] = aSaveCksum[0];
+ pWal->hdr.aFrameCksum[1] = aSaveCksum[1];
+
+ begin_unreliable_shm_out:
+ sqlite3_free(aFrame);
+ if( rc!=SQLITE_OK ){
+ int i;
+ for(i=0; i<pWal->nWiData; i++){
+ sqlite3_free((void*)pWal->apWiData[i]);
+ pWal->apWiData[i] = 0;
+ }
+ pWal->bShmUnreliable = 0;
+ sqlite3WalEndReadTransaction(pWal);
+ *pChanged = 1;
+ }
+ return rc;
+}
/*
** Attempt to start a read transaction. This might fail due to a race or
** checkpointed. If useWal==0 then this routine calls walIndexReadHdr()
** to make a copy of the wal-index header into pWal->hdr. If the
** wal-index header has changed, *pChanged is set to 1 (as an indication
-** to the caller that the local paget cache is obsolete and needs to be
+** to the caller that the local page cache is obsolete and needs to be
** flushed.) When useWal==1, the wal-index header is assumed to already
** be loaded and the pChanged parameter is unused.
**
int mxI; /* Index of largest aReadMark[] value */
int i; /* Loop counter */
int rc = SQLITE_OK; /* Return code */
+ u32 mxFrame; /* Wal frame to lock to */
assert( pWal->readLock<0 ); /* Not currently locked */
+ /* useWal may only be set for read/write connections */
+ assert( (pWal->readOnly & WAL_SHM_RDONLY)==0 || useWal==0 );
+
/* Take steps to avoid spinning forever if there is a protocol error.
**
** Circumstances that cause a RETRY should only last for the briefest
}
if( !useWal ){
- rc = walIndexReadHdr(pWal, pChanged);
+ assert( rc==SQLITE_OK );
+ if( pWal->bShmUnreliable==0 ){
+ rc = walIndexReadHdr(pWal, pChanged);
+ }
if( rc==SQLITE_BUSY ){
/* If there is not a recovery running in another thread or process
** then convert BUSY errors to WAL_RETRY. If recovery is known to
if( rc!=SQLITE_OK ){
return rc;
}
+ else if( pWal->bShmUnreliable ){
+ return walBeginShmUnreliable(pWal, pChanged);
+ }
}
+ assert( pWal->nWiData>0 );
+ assert( pWal->apWiData[0]!=0 );
pInfo = walCkptInfo(pWal);
- if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame ){
+ if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame
+#ifdef SQLITE_ENABLE_SNAPSHOT
+ && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0)
+#endif
+ ){
/* The WAL has been completely backfilled (or it is empty).
** and can be safely ignored.
*/
*/
mxReadMark = 0;
mxI = 0;
+ mxFrame = pWal->hdr.mxFrame;
+#ifdef SQLITE_ENABLE_SNAPSHOT
+ if( pWal->pSnapshot && pWal->pSnapshot->mxFrame<mxFrame ){
+ mxFrame = pWal->pSnapshot->mxFrame;
+ }
+#endif
for(i=1; i<WAL_NREADER; i++){
u32 thisMark = pInfo->aReadMark[i];
- if( mxReadMark<=thisMark && thisMark<=pWal->hdr.mxFrame ){
+ if( mxReadMark<=thisMark && thisMark<=mxFrame ){
assert( thisMark!=READMARK_NOT_USED );
mxReadMark = thisMark;
mxI = i;
}
}
- /* There was once an "if" here. The extra "{" is to preserve indentation. */
- {
- if( (pWal->readOnly & WAL_SHM_RDONLY)==0
- && (mxReadMark<pWal->hdr.mxFrame || mxI==0)
- ){
- for(i=1; i<WAL_NREADER; i++){
- rc = walLockExclusive(pWal, WAL_READ_LOCK(i), 1, 0);
- if( rc==SQLITE_OK ){
- mxReadMark = pInfo->aReadMark[i] = pWal->hdr.mxFrame;
- mxI = i;
- walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
- break;
- }else if( rc!=SQLITE_BUSY ){
- return rc;
- }
+ if( (pWal->readOnly & WAL_SHM_RDONLY)==0
+ && (mxReadMark<mxFrame || mxI==0)
+ ){
+ for(i=1; i<WAL_NREADER; i++){
+ rc = walLockExclusive(pWal, WAL_READ_LOCK(i), 1);
+ if( rc==SQLITE_OK ){
+ mxReadMark = pInfo->aReadMark[i] = mxFrame;
+ mxI = i;
+ walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1);
+ break;
+ }else if( rc!=SQLITE_BUSY ){
+ return rc;
}
}
- if( mxI==0 ){
- assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 );
- return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTLOCK;
- }
+ }
+ if( mxI==0 ){
+ assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 );
+ return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTINIT;
+ }
- rc = walLockShared(pWal, WAL_READ_LOCK(mxI));
- if( rc ){
- return rc==SQLITE_BUSY ? WAL_RETRY : rc;
- }
- /* Now that the read-lock has been obtained, check that neither the
- ** value in the aReadMark[] array or the contents of the wal-index
- ** header have changed.
- **
- ** It is necessary to check that the wal-index header did not change
- ** between the time it was read and when the shared-lock was obtained
- ** on WAL_READ_LOCK(mxI) was obtained to account for the possibility
- ** that the log file may have been wrapped by a writer, or that frames
- ** that occur later in the log than pWal->hdr.mxFrame may have been
- ** copied into the database by a checkpointer. If either of these things
- ** happened, then reading the database with the current value of
- ** pWal->hdr.mxFrame risks reading a corrupted snapshot. So, retry
- ** instead.
- **
- ** Before checking that the live wal-index header has not changed
- ** since it was read, set Wal.minFrame to the first frame in the wal
- ** file that has not yet been checkpointed. This client will not need
- ** to read any frames earlier than minFrame from the wal file - they
- ** can be safely read directly from the database file.
- **
- ** Because a ShmBarrier() call is made between taking the copy of
- ** nBackfill and checking that the wal-header in shared-memory still
- ** matches the one cached in pWal->hdr, it is guaranteed that the
- ** checkpointer that set nBackfill was not working with a wal-index
- ** header newer than that cached in pWal->hdr. If it were, that could
- ** cause a problem. The checkpointer could omit to checkpoint
- ** a version of page X that lies before pWal->minFrame (call that version
- ** A) on the basis that there is a newer version (version B) of the same
- ** page later in the wal file. But if version B happens to like past
- ** frame pWal->hdr.mxFrame - then the client would incorrectly assume
- ** that it can read version A from the database file. However, since
- ** we can guarantee that the checkpointer that set nBackfill could not
- ** see any pages past pWal->hdr.mxFrame, this problem does not come up.
- */
- pWal->minFrame = pInfo->nBackfill+1;
- walShmBarrier(pWal);
- if( pInfo->aReadMark[mxI]!=mxReadMark
- || memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr))
- ){
- walUnlockShared(pWal, WAL_READ_LOCK(mxI));
- return WAL_RETRY;
- }else{
- assert( mxReadMark<=pWal->hdr.mxFrame );
- pWal->readLock = (i16)mxI;
+ rc = walLockShared(pWal, WAL_READ_LOCK(mxI));
+ if( rc ){
+ return rc==SQLITE_BUSY ? WAL_RETRY : rc;
+ }
+ /* Now that the read-lock has been obtained, check that neither the
+ ** value in the aReadMark[] array or the contents of the wal-index
+ ** header have changed.
+ **
+ ** It is necessary to check that the wal-index header did not change
+ ** between the time it was read and when the shared-lock was obtained
+ ** on WAL_READ_LOCK(mxI) was obtained to account for the possibility
+ ** that the log file may have been wrapped by a writer, or that frames
+ ** that occur later in the log than pWal->hdr.mxFrame may have been
+ ** copied into the database by a checkpointer. If either of these things
+ ** happened, then reading the database with the current value of
+ ** pWal->hdr.mxFrame risks reading a corrupted snapshot. So, retry
+ ** instead.
+ **
+ ** Before checking that the live wal-index header has not changed
+ ** since it was read, set Wal.minFrame to the first frame in the wal
+ ** file that has not yet been checkpointed. This client will not need
+ ** to read any frames earlier than minFrame from the wal file - they
+ ** can be safely read directly from the database file.
+ **
+ ** Because a ShmBarrier() call is made between taking the copy of
+ ** nBackfill and checking that the wal-header in shared-memory still
+ ** matches the one cached in pWal->hdr, it is guaranteed that the
+ ** checkpointer that set nBackfill was not working with a wal-index
+ ** header newer than that cached in pWal->hdr. If it were, that could
+ ** cause a problem. The checkpointer could omit to checkpoint
+ ** a version of page X that lies before pWal->minFrame (call that version
+ ** A) on the basis that there is a newer version (version B) of the same
+ ** page later in the wal file. But if version B happens to like past
+ ** frame pWal->hdr.mxFrame - then the client would incorrectly assume
+ ** that it can read version A from the database file. However, since
+ ** we can guarantee that the checkpointer that set nBackfill could not
+ ** see any pages past pWal->hdr.mxFrame, this problem does not come up.
+ */
+ pWal->minFrame = pInfo->nBackfill+1;
+ walShmBarrier(pWal);
+ if( pInfo->aReadMark[mxI]!=mxReadMark
+ || memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr))
+ ){
+ walUnlockShared(pWal, WAL_READ_LOCK(mxI));
+ return WAL_RETRY;
+ }else{
+ assert( mxReadMark<=pWal->hdr.mxFrame );
+ pWal->readLock = (i16)mxI;
+ }
+ return rc;
+}
+
+#ifdef SQLITE_ENABLE_SNAPSHOT
+/*
+** Attempt to reduce the value of the WalCkptInfo.nBackfillAttempted
+** variable so that older snapshots can be accessed. To do this, loop
+** through all wal frames from nBackfillAttempted to (nBackfill+1),
+** comparing their content to the corresponding page with the database
+** file, if any. Set nBackfillAttempted to the frame number of the
+** first frame for which the wal file content matches the db file.
+**
+** This is only really safe if the file-system is such that any page
+** writes made by earlier checkpointers were atomic operations, which
+** is not always true. It is also possible that nBackfillAttempted
+** may be left set to a value larger than expected, if a wal frame
+** contains content that duplicate of an earlier version of the same
+** page.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code if an
+** error occurs. It is not an error if nBackfillAttempted cannot be
+** decreased at all.
+*/
+SQLITE_PRIVATE int sqlite3WalSnapshotRecover(Wal *pWal){
+ int rc;
+
+ assert( pWal->readLock>=0 );
+ rc = walLockExclusive(pWal, WAL_CKPT_LOCK, 1);
+ if( rc==SQLITE_OK ){
+ volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
+ int szPage = (int)pWal->szPage;
+ i64 szDb; /* Size of db file in bytes */
+
+ rc = sqlite3OsFileSize(pWal->pDbFd, &szDb);
+ if( rc==SQLITE_OK ){
+ void *pBuf1 = sqlite3_malloc(szPage);
+ void *pBuf2 = sqlite3_malloc(szPage);
+ if( pBuf1==0 || pBuf2==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ u32 i = pInfo->nBackfillAttempted;
+ for(i=pInfo->nBackfillAttempted; i>pInfo->nBackfill; i--){
+ volatile ht_slot *dummy;
+ volatile u32 *aPgno; /* Array of page numbers */
+ u32 iZero; /* Frame corresponding to aPgno[0] */
+ u32 pgno; /* Page number in db file */
+ i64 iDbOff; /* Offset of db file entry */
+ i64 iWalOff; /* Offset of wal file entry */
+
+ rc = walHashGet(pWal, walFramePage(i), &dummy, &aPgno, &iZero);
+ if( rc!=SQLITE_OK ) break;
+ pgno = aPgno[i-iZero];
+ iDbOff = (i64)(pgno-1) * szPage;
+
+ if( iDbOff+szPage<=szDb ){
+ iWalOff = walFrameOffset(i, szPage) + WAL_FRAME_HDRSIZE;
+ rc = sqlite3OsRead(pWal->pWalFd, pBuf1, szPage, iWalOff);
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsRead(pWal->pDbFd, pBuf2, szPage, iDbOff);
+ }
+
+ if( rc!=SQLITE_OK || 0==memcmp(pBuf1, pBuf2, szPage) ){
+ break;
+ }
+ }
+
+ pInfo->nBackfillAttempted = i-1;
+ }
+ }
+
+ sqlite3_free(pBuf1);
+ sqlite3_free(pBuf2);
}
+ walUnlockExclusive(pWal, WAL_CKPT_LOCK, 1);
}
+
return rc;
}
+#endif /* SQLITE_ENABLE_SNAPSHOT */
/*
** Begin a read transaction on the database.
int rc; /* Return code */
int cnt = 0; /* Number of TryBeginRead attempts */
+#ifdef SQLITE_ENABLE_SNAPSHOT
+ int bChanged = 0;
+ WalIndexHdr *pSnapshot = pWal->pSnapshot;
+ if( pSnapshot && memcmp(pSnapshot, &pWal->hdr, sizeof(WalIndexHdr))!=0 ){
+ bChanged = 1;
+ }
+#endif
+
do{
rc = walTryBeginRead(pWal, pChanged, 0, ++cnt);
}while( rc==WAL_RETRY );
testcase( (rc&0xff)==SQLITE_IOERR );
testcase( rc==SQLITE_PROTOCOL );
testcase( rc==SQLITE_OK );
+
+#ifdef SQLITE_ENABLE_SNAPSHOT
+ if( rc==SQLITE_OK ){
+ if( pSnapshot && memcmp(pSnapshot, &pWal->hdr, sizeof(WalIndexHdr))!=0 ){
+ /* At this point the client has a lock on an aReadMark[] slot holding
+ ** a value equal to or smaller than pSnapshot->mxFrame, but pWal->hdr
+ ** is populated with the wal-index header corresponding to the head
+ ** of the wal file. Verify that pSnapshot is still valid before
+ ** continuing. Reasons why pSnapshot might no longer be valid:
+ **
+ ** (1) The WAL file has been reset since the snapshot was taken.
+ ** In this case, the salt will have changed.
+ **
+ ** (2) A checkpoint as been attempted that wrote frames past
+ ** pSnapshot->mxFrame into the database file. Note that the
+ ** checkpoint need not have completed for this to cause problems.
+ */
+ volatile WalCkptInfo *pInfo = walCkptInfo(pWal);
+
+ assert( pWal->readLock>0 || pWal->hdr.mxFrame==0 );
+ assert( pInfo->aReadMark[pWal->readLock]<=pSnapshot->mxFrame );
+
+ /* It is possible that there is a checkpointer thread running
+ ** concurrent with this code. If this is the case, it may be that the
+ ** checkpointer has already determined that it will checkpoint
+ ** snapshot X, where X is later in the wal file than pSnapshot, but
+ ** has not yet set the pInfo->nBackfillAttempted variable to indicate
+ ** its intent. To avoid the race condition this leads to, ensure that
+ ** there is no checkpointer process by taking a shared CKPT lock
+ ** before checking pInfo->nBackfillAttempted.
+ **
+ ** TODO: Does the aReadMark[] lock prevent a checkpointer from doing
+ ** this already?
+ */
+ rc = walLockShared(pWal, WAL_CKPT_LOCK);
+
+ if( rc==SQLITE_OK ){
+ /* Check that the wal file has not been wrapped. Assuming that it has
+ ** not, also check that no checkpointer has attempted to checkpoint any
+ ** frames beyond pSnapshot->mxFrame. If either of these conditions are
+ ** true, return SQLITE_BUSY_SNAPSHOT. Otherwise, overwrite pWal->hdr
+ ** with *pSnapshot and set *pChanged as appropriate for opening the
+ ** snapshot. */
+ if( !memcmp(pSnapshot->aSalt, pWal->hdr.aSalt, sizeof(pWal->hdr.aSalt))
+ && pSnapshot->mxFrame>=pInfo->nBackfillAttempted
+ ){
+ assert( pWal->readLock>0 );
+ memcpy(&pWal->hdr, pSnapshot, sizeof(WalIndexHdr));
+ *pChanged = bChanged;
+ }else{
+ rc = SQLITE_BUSY_SNAPSHOT;
+ }
+
+ /* Release the shared CKPT lock obtained above. */
+ walUnlockShared(pWal, WAL_CKPT_LOCK);
+ }
+
+
+ if( rc!=SQLITE_OK ){
+ sqlite3WalEndReadTransaction(pWal);
+ }
+ }
+ }
+#endif
return rc;
}
** then the WAL is ignored by the reader so return early, as if the
** WAL were empty.
*/
- if( iLast==0 || pWal->readLock==0 ){
+ if( iLast==0 || (pWal->readLock==0 && pWal->bShmUnreliable==0) ){
*piRead = 0;
return SQLITE_OK;
}
** table after the current read-transaction had started.
*/
iMinHash = walFramePage(pWal->minFrame);
- for(iHash=walFramePage(iLast); iHash>=iMinHash && iRead==0; iHash--){
+ for(iHash=walFramePage(iLast); iHash>=iMinHash; iHash--){
volatile ht_slot *aHash; /* Pointer to hash table */
volatile u32 *aPgno; /* Pointer to array of page numbers */
u32 iZero; /* Frame number corresponding to aPgno[0] */
return SQLITE_CORRUPT_BKPT;
}
}
+ if( iRead ) break;
}
#ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT
{
u32 iRead2 = 0;
u32 iTest;
- assert( pWal->minFrame>0 );
- for(iTest=iLast; iTest>=pWal->minFrame; iTest--){
+ assert( pWal->bShmUnreliable || pWal->minFrame>0 );
+ for(iTest=iLast; iTest>=pWal->minFrame && iTest>0; iTest--){
if( walFramePgno(pWal, iTest)==pgno ){
iRead2 = iTest;
break;
/* Cannot start a write transaction without first holding a read
** transaction. */
assert( pWal->readLock>=0 );
+ assert( pWal->writeLock==0 && pWal->iReCksum==0 );
if( pWal->readOnly ){
return SQLITE_READONLY;
/* Only one writer allowed at a time. Get the write lock. Return
** SQLITE_BUSY if unable.
*/
- rc = walLockExclusive(pWal, WAL_WRITE_LOCK, 1, 0);
+ rc = walLockExclusive(pWal, WAL_WRITE_LOCK, 1);
if( rc ){
return rc;
}
if( pWal->writeLock ){
walUnlockExclusive(pWal, WAL_WRITE_LOCK, 1);
pWal->writeLock = 0;
+ pWal->iReCksum = 0;
pWal->truncateOnCommit = 0;
}
return SQLITE_OK;
if( pInfo->nBackfill>0 ){
u32 salt1;
sqlite3_randomness(4, &salt1);
- rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1, 0);
+ rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1);
if( rc==SQLITE_OK ){
/* If all readers are using WAL_READ_LOCK(0) (in other words if no
** readers are currently using the WAL), then the transactions
iOffset += iFirstAmt;
iAmt -= iFirstAmt;
pContent = (void*)(iFirstAmt + (char*)pContent);
- assert( p->syncFlags & (SQLITE_SYNC_NORMAL|SQLITE_SYNC_FULL) );
- rc = sqlite3OsSync(p->pFd, p->syncFlags & SQLITE_SYNC_MASK);
+ assert( WAL_SYNC_FLAGS(p->syncFlags)!=0 );
+ rc = sqlite3OsSync(p->pFd, WAL_SYNC_FLAGS(p->syncFlags));
if( iAmt==0 || rc ) return rc;
}
rc = sqlite3OsWrite(p->pFd, pContent, iAmt, iOffset);
void *pData; /* Data actually written */
u8 aFrame[WAL_FRAME_HDRSIZE]; /* Buffer to assemble frame-header in */
#if defined(SQLITE_HAS_CODEC)
- if( (pData = sqlite3PagerCodec(pPage))==0 ) return SQLITE_NOMEM;
+ if( (pData = sqlite3PagerCodec(pPage))==0 ) return SQLITE_NOMEM_BKPT;
#else
pData = pPage->pData;
#endif
return rc;
}
+/*
+** This function is called as part of committing a transaction within which
+** one or more frames have been overwritten. It updates the checksums for
+** all frames written to the wal file by the current transaction starting
+** with the earliest to have been overwritten.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+*/
+static int walRewriteChecksums(Wal *pWal, u32 iLast){
+ const int szPage = pWal->szPage;/* Database page size */
+ int rc = SQLITE_OK; /* Return code */
+ u8 *aBuf; /* Buffer to load data from wal file into */
+ u8 aFrame[WAL_FRAME_HDRSIZE]; /* Buffer to assemble frame-headers in */
+ u32 iRead; /* Next frame to read from wal file */
+ i64 iCksumOff;
+
+ aBuf = sqlite3_malloc(szPage + WAL_FRAME_HDRSIZE);
+ if( aBuf==0 ) return SQLITE_NOMEM_BKPT;
+
+ /* Find the checksum values to use as input for the recalculating the
+ ** first checksum. If the first frame is frame 1 (implying that the current
+ ** transaction restarted the wal file), these values must be read from the
+ ** wal-file header. Otherwise, read them from the frame header of the
+ ** previous frame. */
+ assert( pWal->iReCksum>0 );
+ if( pWal->iReCksum==1 ){
+ iCksumOff = 24;
+ }else{
+ iCksumOff = walFrameOffset(pWal->iReCksum-1, szPage) + 16;
+ }
+ rc = sqlite3OsRead(pWal->pWalFd, aBuf, sizeof(u32)*2, iCksumOff);
+ pWal->hdr.aFrameCksum[0] = sqlite3Get4byte(aBuf);
+ pWal->hdr.aFrameCksum[1] = sqlite3Get4byte(&aBuf[sizeof(u32)]);
+
+ iRead = pWal->iReCksum;
+ pWal->iReCksum = 0;
+ for(; rc==SQLITE_OK && iRead<=iLast; iRead++){
+ i64 iOff = walFrameOffset(iRead, szPage);
+ rc = sqlite3OsRead(pWal->pWalFd, aBuf, szPage+WAL_FRAME_HDRSIZE, iOff);
+ if( rc==SQLITE_OK ){
+ u32 iPgno, nDbSize;
+ iPgno = sqlite3Get4byte(aBuf);
+ nDbSize = sqlite3Get4byte(&aBuf[4]);
+
+ walEncodeFrame(pWal, iPgno, nDbSize, &aBuf[WAL_FRAME_HDRSIZE], aFrame);
+ rc = sqlite3OsWrite(pWal->pWalFd, aFrame, sizeof(aFrame), iOff);
+ }
+ }
+
+ sqlite3_free(aBuf);
+ return rc;
+}
+
/*
** Write a set of frames to the log. The caller must hold the write-lock
** on the log file (obtained using sqlite3WalBeginWriteTransaction()).
int szFrame; /* The size of a single frame */
i64 iOffset; /* Next byte to write in WAL file */
WalWriter w; /* The writer */
+ u32 iFirst = 0; /* First frame that may be overwritten */
+ WalIndexHdr *pLive; /* Pointer to shared header */
assert( pList );
assert( pWal->writeLock );
}
#endif
+ pLive = (WalIndexHdr*)walIndexHdr(pWal);
+ if( memcmp(&pWal->hdr, (void *)pLive, sizeof(WalIndexHdr))!=0 ){
+ iFirst = pLive->mxFrame+1;
+ }
+
/* See if it is possible to write these frames into the start of the
** log file, instead of appending to it at pWal->hdr.mxFrame.
*/
** an out-of-order write following a WAL restart could result in
** database corruption. See the ticket:
**
- ** http://localhost:591/sqlite/info/ff5be73dee
+ ** https://sqlite.org/src/info/ff5be73dee
*/
- if( pWal->syncHeader && sync_flags ){
- rc = sqlite3OsSync(pWal->pWalFd, sync_flags & SQLITE_SYNC_MASK);
+ if( pWal->syncHeader ){
+ rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags));
if( rc ) return rc;
}
}
/* Write all frames into the log file exactly once */
for(p=pList; p; p=p->pDirty){
int nDbSize; /* 0 normally. Positive == commit flag */
+
+ /* Check if this page has already been written into the wal file by
+ ** the current transaction. If so, overwrite the existing frame and
+ ** set Wal.writeLock to WAL_WRITELOCK_RECKSUM - indicating that
+ ** checksums must be recomputed when the transaction is committed. */
+ if( iFirst && (p->pDirty || isCommit==0) ){
+ u32 iWrite = 0;
+ VVA_ONLY(rc =) sqlite3WalFindFrame(pWal, p->pgno, &iWrite);
+ assert( rc==SQLITE_OK || iWrite==0 );
+ if( iWrite>=iFirst ){
+ i64 iOff = walFrameOffset(iWrite, szPage) + WAL_FRAME_HDRSIZE;
+ void *pData;
+ if( pWal->iReCksum==0 || iWrite<pWal->iReCksum ){
+ pWal->iReCksum = iWrite;
+ }
+#if defined(SQLITE_HAS_CODEC)
+ if( (pData = sqlite3PagerCodec(p))==0 ) return SQLITE_NOMEM;
+#else
+ pData = p->pData;
+#endif
+ rc = sqlite3OsWrite(pWal->pWalFd, pData, szPage, iOff);
+ if( rc ) return rc;
+ p->flags &= ~PGHDR_WAL_APPEND;
+ continue;
+ }
+ }
+
iFrame++;
assert( iOffset==walFrameOffset(iFrame, szPage) );
nDbSize = (isCommit && p->pDirty==0) ? nTruncate : 0;
if( rc ) return rc;
pLast = p;
iOffset += szFrame;
+ p->flags |= PGHDR_WAL_APPEND;
+ }
+
+ /* Recalculate checksums within the wal file if required. */
+ if( isCommit && pWal->iReCksum ){
+ rc = walRewriteChecksums(pWal, iFrame);
+ if( rc ) return rc;
}
/* If this is the end of a transaction, then we might need to pad
** sector boundary is synced; the part of the last frame that extends
** past the sector boundary is written after the sync.
*/
- if( isCommit && (sync_flags & WAL_SYNC_TRANSACTIONS)!=0 ){
+ if( isCommit && WAL_SYNC_FLAGS(sync_flags)!=0 ){
+ int bSync = 1;
if( pWal->padToSectorBoundary ){
int sectorSize = sqlite3SectorSize(pWal->pWalFd);
w.iSyncPoint = ((iOffset+sectorSize-1)/sectorSize)*sectorSize;
+ bSync = (w.iSyncPoint==iOffset);
+ testcase( bSync );
while( iOffset<w.iSyncPoint ){
rc = walWriteOneFrame(&w, pLast, nTruncate, iOffset);
if( rc ) return rc;
iOffset += szFrame;
nExtra++;
}
- }else{
- rc = sqlite3OsSync(w.pFd, sync_flags & SQLITE_SYNC_MASK);
+ }
+ if( bSync ){
+ assert( rc==SQLITE_OK );
+ rc = sqlite3OsSync(w.pFd, WAL_SYNC_FLAGS(sync_flags));
}
}
*/
iFrame = pWal->hdr.mxFrame;
for(p=pList; p && rc==SQLITE_OK; p=p->pDirty){
+ if( (p->flags & PGHDR_WAL_APPEND)==0 ) continue;
iFrame++;
rc = walIndexAppend(pWal, iFrame, p->pgno);
}
*/
SQLITE_PRIVATE int sqlite3WalCheckpoint(
Wal *pWal, /* Wal connection */
+ sqlite3 *db, /* Check this handle's interrupt flag */
int eMode, /* PASSIVE, FULL, RESTART, or TRUNCATE */
int (*xBusy)(void*), /* Function to call when busy */
void *pBusyArg, /* Context argument for xBusyHandler */
/* IMPLEMENTATION-OF: R-62028-47212 All calls obtain an exclusive
** "checkpoint" lock on the database file. */
- rc = walLockExclusive(pWal, WAL_CKPT_LOCK, 1, 0);
+ rc = walLockExclusive(pWal, WAL_CKPT_LOCK, 1);
if( rc ){
/* EVIDENCE-OF: R-10421-19736 If any other process is running a
** checkpoint operation at the same time, the lock cannot be obtained and
/* Copy data from the log to the database file. */
if( rc==SQLITE_OK ){
+
if( pWal->hdr.mxFrame && walPagesize(pWal)!=nBuf ){
rc = SQLITE_CORRUPT_BKPT;
}else{
- rc = walCheckpoint(pWal, eMode2, xBusy2, pBusyArg, sync_flags, zBuf);
+ rc = walCheckpoint(pWal, db, eMode2, xBusy2, pBusyArg, sync_flags, zBuf);
}
/* If no error occurred, set the output variables. */
assert( pWal->readLock>=0 || (op<=0 && pWal->exclusiveMode==0) );
if( op==0 ){
- if( pWal->exclusiveMode ){
- pWal->exclusiveMode = 0;
+ if( pWal->exclusiveMode!=WAL_NORMAL_MODE ){
+ pWal->exclusiveMode = WAL_NORMAL_MODE;
if( walLockShared(pWal, WAL_READ_LOCK(pWal->readLock))!=SQLITE_OK ){
- pWal->exclusiveMode = 1;
+ pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
}
- rc = pWal->exclusiveMode==0;
+ rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
}else{
/* Already in locking_mode=NORMAL */
rc = 0;
}
}else if( op>0 ){
- assert( pWal->exclusiveMode==0 );
+ assert( pWal->exclusiveMode==WAL_NORMAL_MODE );
assert( pWal->readLock>=0 );
walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock));
- pWal->exclusiveMode = 1;
+ pWal->exclusiveMode = WAL_EXCLUSIVE_MODE;
rc = 1;
}else{
- rc = pWal->exclusiveMode==0;
+ rc = pWal->exclusiveMode==WAL_NORMAL_MODE;
}
return rc;
}
return (pWal && pWal->exclusiveMode==WAL_HEAPMEMORY_MODE );
}
+#ifdef SQLITE_ENABLE_SNAPSHOT
+/* Create a snapshot object. The content of a snapshot is opaque to
+** every other subsystem, so the WAL module can put whatever it needs
+** in the object.
+*/
+SQLITE_PRIVATE int sqlite3WalSnapshotGet(Wal *pWal, sqlite3_snapshot **ppSnapshot){
+ int rc = SQLITE_OK;
+ WalIndexHdr *pRet;
+ static const u32 aZero[4] = { 0, 0, 0, 0 };
+
+ assert( pWal->readLock>=0 && pWal->writeLock==0 );
+
+ if( memcmp(&pWal->hdr.aFrameCksum[0],aZero,16)==0 ){
+ *ppSnapshot = 0;
+ return SQLITE_ERROR;
+ }
+ pRet = (WalIndexHdr*)sqlite3_malloc(sizeof(WalIndexHdr));
+ if( pRet==0 ){
+ rc = SQLITE_NOMEM_BKPT;
+ }else{
+ memcpy(pRet, &pWal->hdr, sizeof(WalIndexHdr));
+ *ppSnapshot = (sqlite3_snapshot*)pRet;
+ }
+
+ return rc;
+}
+
+/* Try to open on pSnapshot when the next read-transaction starts
+*/
+SQLITE_PRIVATE void sqlite3WalSnapshotOpen(Wal *pWal, sqlite3_snapshot *pSnapshot){
+ pWal->pSnapshot = (WalIndexHdr*)pSnapshot;
+}
+
+/*
+** Return a +ve value if snapshot p1 is newer than p2. A -ve value if
+** p1 is older than p2 and zero if p1 and p2 are the same snapshot.
+*/
+SQLITE_API int sqlite3_snapshot_cmp(sqlite3_snapshot *p1, sqlite3_snapshot *p2){
+ WalIndexHdr *pHdr1 = (WalIndexHdr*)p1;
+ WalIndexHdr *pHdr2 = (WalIndexHdr*)p2;
+
+ /* aSalt[0] is a copy of the value stored in the wal file header. It
+ ** is incremented each time the wal file is restarted. */
+ if( pHdr1->aSalt[0]<pHdr2->aSalt[0] ) return -1;
+ if( pHdr1->aSalt[0]>pHdr2->aSalt[0] ) return +1;
+ if( pHdr1->mxFrame<pHdr2->mxFrame ) return -1;
+ if( pHdr1->mxFrame>pHdr2->mxFrame ) return +1;
+ return 0;
+}
+#endif /* SQLITE_ENABLE_SNAPSHOT */
+
#ifdef SQLITE_ENABLE_ZIPVFS
/*
** If the argument is not NULL, it points to a Wal object that holds a
}
#endif
+/* Return the sqlite3_file object for the WAL file
+*/
+SQLITE_PRIVATE sqlite3_file *sqlite3WalFile(Wal *pWal){
+ return pWal->pWalFd;
+}
+
#endif /* #ifndef SQLITE_OMIT_WAL */
/************** End of wal.c *************************************************/
#define PTF_LEAF 0x08
/*
-** As each page of the file is loaded into memory, an instance of the following
-** structure is appended and initialized to zero. This structure stores
-** information about the page that is decoded from the raw file page.
+** An instance of this object stores information about each a single database
+** page that has been loaded into memory. The information in this object
+** is derived from the raw on-disk page content.
**
-** The pParent field points back to the parent page. This allows us to
-** walk up the BTree from any leaf to the root. Care must be taken to
-** unref() the parent page pointer when this page is no longer referenced.
-** The pageDestructor() routine handles that chore.
+** As each database page is loaded into memory, the pager allocats an
+** instance of this object and zeros the first 8 bytes. (This is the
+** "extra" information associated with each page of the pager.)
**
** Access to all fields of this structure is controlled by the mutex
** stored in MemPage.pBt->mutex.
*/
struct MemPage {
u8 isInit; /* True if previously initialized. MUST BE FIRST! */
- u8 nOverflow; /* Number of overflow cell bodies in aCell[] */
+ u8 bBusy; /* Prevent endless loops on corrupt database files */
u8 intKey; /* True if table b-trees. False for index b-trees */
u8 intKeyLeaf; /* True if the leaf of an intKey table */
- u8 noPayload; /* True if internal intKey page (thus w/o data) */
+ Pgno pgno; /* Page number for this page */
+ /* Only the first 8 bytes (above) are zeroed by pager.c when a new page
+ ** is allocated. All fields that follow must be initialized before use */
u8 leaf; /* True if a leaf page */
u8 hdrOffset; /* 100 for page 1. 0 otherwise */
u8 childPtrSize; /* 0 if leaf==1. 4 if leaf==0 */
u8 max1bytePayload; /* min(maxLocal,127) */
- u8 bBusy; /* Prevent endless loops on corrupt database files */
+ u8 nOverflow; /* Number of overflow cell bodies in aCell[] */
u16 maxLocal; /* Copy of BtShared.maxLocal or BtShared.maxLeaf */
u16 minLocal; /* Copy of BtShared.minLocal or BtShared.minLeaf */
u16 cellOffset; /* Index in aData of first cell pointer */
u16 nFree; /* Number of free bytes on the page */
u16 nCell; /* Number of cells on this page, local and ovfl */
u16 maskPage; /* Mask for page offset */
- u16 aiOvfl[5]; /* Insert the i-th overflow cell before the aiOvfl-th
+ u16 aiOvfl[4]; /* Insert the i-th overflow cell before the aiOvfl-th
** non-overflow cell */
- u8 *apOvfl[5]; /* Pointers to the body of overflow cells */
+ u8 *apOvfl[4]; /* Pointers to the body of overflow cells */
BtShared *pBt; /* Pointer to BtShared that this page is part of */
u8 *aData; /* Pointer to disk image of the page data */
u8 *aDataEnd; /* One byte past the end of usable data */
DbPage *pDbPage; /* Pager page handle */
u16 (*xCellSize)(MemPage*,u8*); /* cellSizePtr method */
void (*xParseCell)(MemPage*,u8*,CellInfo*); /* btreeParseCell method */
- Pgno pgno; /* Page number for this page */
};
-/*
-** The in-memory image of a disk page has the auxiliary information appended
-** to the end. EXTRA_SIZE is the number of bytes of space needed to hold
-** that extra information.
-*/
-#define EXTRA_SIZE sizeof(MemPage)
-
/*
** A linked list of the following structures is stored at BtShared.pLock.
** Locks are added (or upgraded from READ_LOCK to WRITE_LOCK) when a cursor
#define BTS_READ_ONLY 0x0001 /* Underlying file is readonly */
#define BTS_PAGESIZE_FIXED 0x0002 /* Page size can no longer be changed */
#define BTS_SECURE_DELETE 0x0004 /* PRAGMA secure_delete is enabled */
-#define BTS_INITIALLY_EMPTY 0x0008 /* Database was empty at trans start */
-#define BTS_NO_WAL 0x0010 /* Do not open write-ahead-log files */
-#define BTS_EXCLUSIVE 0x0020 /* pWriter has an exclusive lock */
-#define BTS_PENDING 0x0040 /* Waiting for read-locks to clear */
+#define BTS_OVERWRITE 0x0008 /* Overwrite deleted content with zeros */
+#define BTS_FAST_SECURE 0x000c /* Combination of the previous two */
+#define BTS_INITIALLY_EMPTY 0x0010 /* Database was empty at trans start */
+#define BTS_NO_WAL 0x0020 /* Do not open write-ahead-log files */
+#define BTS_EXCLUSIVE 0x0040 /* pWriter has an exclusive lock */
+#define BTS_PENDING 0x0080 /* Waiting for read-locks to clear */
/*
** An instance of the following structure is used to hold information
u8 *pPayload; /* Pointer to the start of payload */
u32 nPayload; /* Bytes of payload */
u16 nLocal; /* Amount of payload held locally, not on overflow */
- u16 iOverflow; /* Offset to overflow page number. Zero if no overflow */
u16 nSize; /* Size of the cell content on the main b-tree page */
};
** eState==FAULT: Cursor fault with skipNext as error code.
*/
struct BtCursor {
+ u8 eState; /* One of the CURSOR_XXX constants (see below) */
+ u8 curFlags; /* zero or more BTCF_* flags defined below */
+ u8 curPagerFlags; /* Flags to send to sqlite3PagerGet() */
+ u8 hints; /* As configured by CursorSetHints() */
+ int skipNext; /* Prev() is noop if negative. Next() is noop if positive.
+ ** Error code if eState==CURSOR_FAULT */
Btree *pBtree; /* The Btree to which this cursor belongs */
- BtShared *pBt; /* The BtShared this cursor points to */
- BtCursor *pNext; /* Forms a linked list of all cursors */
Pgno *aOverflow; /* Cache of overflow page locations */
- CellInfo info; /* A parse of the cell we are pointing at */
- i64 nKey; /* Size of pKey, or last integer key */
void *pKey; /* Saved key that was cursor last known position */
- Pgno pgnoRoot; /* The root page of this tree */
- int nOvflAlloc; /* Allocated size of aOverflow[] array */
- int skipNext; /* Prev() is noop if negative. Next() is noop if positive.
- ** Error code if eState==CURSOR_FAULT */
- u8 curFlags; /* zero or more BTCF_* flags defined below */
- u8 curPagerFlags; /* Flags to send to sqlite3PagerAcquire() */
- u8 eState; /* One of the CURSOR_XXX constants (see below) */
- u8 hints; /* As configured by CursorSetHints() */
/* All fields above are zeroed when the cursor is allocated. See
** sqlite3BtreeCursorZero(). Fields that follow must be manually
** initialized. */
+#define BTCURSOR_FIRST_UNINIT pBt /* Name of first uninitialized field */
+ BtShared *pBt; /* The BtShared this cursor points to */
+ BtCursor *pNext; /* Forms a linked list of all cursors */
+ CellInfo info; /* A parse of the cell we are pointing at */
+ i64 nKey; /* Size of pKey, or last integer key */
+ Pgno pgnoRoot; /* The root page of this tree */
i8 iPage; /* Index of current page in apPage */
u8 curIntKey; /* Value of apPage[0]->intKey */
- struct KeyInfo *pKeyInfo; /* Argument passed to comparison function */
- void *padding1; /* Make object size a multiple of 16 */
- u16 aiIdx[BTCURSOR_MAX_DEPTH]; /* Current index in apPage[i] */
- MemPage *apPage[BTCURSOR_MAX_DEPTH]; /* Pages from root to current page */
+ u16 ix; /* Current index for apPage[iPage] */
+ u16 aiIdx[BTCURSOR_MAX_DEPTH-1]; /* Current index in apPage[i] */
+ struct KeyInfo *pKeyInfo; /* Arg passed to comparison function */
+ MemPage *pPage; /* Current page */
+ MemPage *apPage[BTCURSOR_MAX_DEPTH-1]; /* Stack of parents of current page */
};
/*
** Do nothing else with this cursor. Any attempt to use the cursor
** should return the error code stored in BtCursor.skipNext
*/
-#define CURSOR_INVALID 0
-#define CURSOR_VALID 1
+#define CURSOR_VALID 0
+#define CURSOR_INVALID 1
#define CURSOR_SKIPNEXT 2
#define CURSOR_REQUIRESEEK 3
#define CURSOR_FAULT 4
*/
#if SQLITE_BYTEORDER==4321
# define get2byteAligned(x) (*(u16*)(x))
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && GCC_VERSION>=4008000
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4008000
# define get2byteAligned(x) __builtin_bswap16(*(u16*)(x))
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(_MSC_VER) && _MSC_VER>=1300
+#elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
# define get2byteAligned(x) _byteswap_ushort(*(u16*)(x))
#else
# define get2byteAligned(x) ((x)[0]<<8 | (x)[1])
#endif
-#ifndef SQLITE_OMIT_INCRBLOB
-/*
-** Enter and leave a mutex on a Btree given a cursor owned by that
-** Btree. These entry points are used by incremental I/O and can be
-** omitted if that module is not used.
-*/
-SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor *pCur){
- sqlite3BtreeEnter(pCur->pBtree);
-}
-SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor *pCur){
- sqlite3BtreeLeave(pCur->pBtree);
-}
-#endif /* SQLITE_OMIT_INCRBLOB */
-
-
/*
** Enter the mutex on every Btree associated with a database
** connection. This is needed (for example) prior to parsing
** two or more btrees in common both try to lock all their btrees
** at the same instant.
*/
-SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3 *db){
+static void SQLITE_NOINLINE btreeEnterAll(sqlite3 *db){
int i;
+ int skipOk = 1;
Btree *p;
assert( sqlite3_mutex_held(db->mutex) );
for(i=0; i<db->nDb; i++){
p = db->aDb[i].pBt;
- if( p ) sqlite3BtreeEnter(p);
+ if( p && p->sharable ){
+ sqlite3BtreeEnter(p);
+ skipOk = 0;
+ }
}
+ db->skipBtreeMutex = skipOk;
}
-SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3 *db){
+SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3 *db){
+ if( db->skipBtreeMutex==0 ) btreeEnterAll(db);
+}
+static void SQLITE_NOINLINE btreeLeaveAll(sqlite3 *db){
int i;
Btree *p;
assert( sqlite3_mutex_held(db->mutex) );
if( p ) sqlite3BtreeLeave(p);
}
}
-
-/*
-** Return true if a particular Btree requires a lock. Return FALSE if
-** no lock is ever required since it is not sharable.
-*/
-SQLITE_PRIVATE int sqlite3BtreeSharable(Btree *p){
- return p->sharable;
+SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3 *db){
+ if( db->skipBtreeMutex==0 ) btreeLeaveAll(db);
}
#ifndef NDEBUG
}
}
#endif /* if SQLITE_THREADSAFE */
+
+#ifndef SQLITE_OMIT_INCRBLOB
+/*
+** Enter a mutex on a Btree given a cursor owned by that Btree.
+**
+** These entry points are used by incremental I/O only. Enter() is required
+** any time OMIT_SHARED_CACHE is not defined, regardless of whether or not
+** the build is threadsafe. Leave() is only required by threadsafe builds.
+*/
+SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor *pCur){
+ sqlite3BtreeEnter(pCur->pBtree);
+}
+# if SQLITE_THREADSAFE
+SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor *pCur){
+ sqlite3BtreeLeave(pCur->pBtree);
+}
+# endif
+#endif /* ifndef SQLITE_OMIT_INCRBLOB */
+
#endif /* ifndef SQLITE_OMIT_SHARED_CACHE */
/************** End of btmutex.c *********************************************/
** The shared cache setting effects only future calls to
** sqlite3_open(), sqlite3_open16(), or sqlite3_open_v2().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int enable){
+SQLITE_API int sqlite3_enable_shared_cache(int enable){
sqlite3GlobalConfig.sharedCacheEnabled = enable;
return SQLITE_OK;
}
#define hasReadConflicts(a, b) 0
#endif
+/*
+** Implementation of the SQLITE_CORRUPT_PAGE() macro. Takes a single
+** (MemPage*) as an argument. The (MemPage*) must not be NULL.
+**
+** If SQLITE_DEBUG is not defined, then this macro is equivalent to
+** SQLITE_CORRUPT_BKPT. Or, if SQLITE_DEBUG is set, then the log message
+** normally produced as a side-effect of SQLITE_CORRUPT_BKPT is augmented
+** with the page number and filename associated with the (MemPage*).
+*/
+#ifdef SQLITE_DEBUG
+int corruptPageError(int lineno, MemPage *p){
+ char *zMsg;
+ sqlite3BeginBenignMalloc();
+ zMsg = sqlite3_mprintf("database corruption page %d of %s",
+ (int)p->pgno, sqlite3PagerFilename(p->pBt->pPager, 0)
+ );
+ sqlite3EndBenignMalloc();
+ if( zMsg ){
+ sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg);
+ }
+ sqlite3_free(zMsg);
+ return SQLITE_CORRUPT_BKPT;
+}
+# define SQLITE_CORRUPT_PAGE(pMemPage) corruptPageError(__LINE__, pMemPage)
+#else
+# define SQLITE_CORRUPT_PAGE(pMemPage) SQLITE_CORRUPT_PGNO(pMemPage->pgno)
+#endif
+
#ifndef SQLITE_OMIT_SHARED_CACHE
#ifdef SQLITE_DEBUG
** Return true immediately.
*/
if( (pBtree->sharable==0)
- || (eLockType==READ_LOCK && (pBtree->db->flags & SQLITE_ReadUncommitted))
+ || (eLockType==READ_LOCK && (pBtree->db->flags & SQLITE_ReadUncommit))
){
return 1;
}
for(p=pBtree->pBt->pCursor; p; p=p->pNext){
if( p->pgnoRoot==iRoot
&& p->pBtree!=pBtree
- && 0==(p->pBtree->db->flags & SQLITE_ReadUncommitted)
+ && 0==(p->pBtree->db->flags & SQLITE_ReadUncommit)
){
return 1;
}
assert( sqlite3BtreeHoldsMutex(p) );
assert( eLock==READ_LOCK || eLock==WRITE_LOCK );
assert( p->db!=0 );
- assert( !(p->db->flags&SQLITE_ReadUncommitted)||eLock==WRITE_LOCK||iTab==1 );
+ assert( !(p->db->flags&SQLITE_ReadUncommit)||eLock==WRITE_LOCK||iTab==1 );
/* If requesting a write-lock, then the Btree must have an open write
** transaction on this file. And, obviously, for this to be so there
** obtain a read-lock using this function. The only read-lock obtained
** by a connection in read-uncommitted mode is on the sqlite_master
** table, and that lock is obtained in BtreeBeginTrans(). */
- assert( 0==(p->db->flags&SQLITE_ReadUncommitted) || eLock==WRITE_LOCK );
+ assert( 0==(p->db->flags&SQLITE_ReadUncommit) || eLock==WRITE_LOCK );
/* This function should only be called on a sharable b-tree after it
** has been determined that no other b-tree holds a conflicting lock. */
if( !pLock ){
pLock = (BtLock *)sqlite3MallocZero(sizeof(BtLock));
if( !pLock ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pLock->iTable = iTable;
pLock->pBtree = p;
#endif /* SQLITE_OMIT_SHARED_CACHE */
-static void releasePage(MemPage *pPage); /* Forward reference */
+static void releasePage(MemPage *pPage); /* Forward reference */
+static void releasePageOne(MemPage *pPage); /* Forward reference */
+static void releasePageNotNull(MemPage *pPage); /* Forward reference */
/*
***** This routine is used inside of assert() only ****
static int cursorHoldsMutex(BtCursor *p){
return sqlite3_mutex_held(p->pBt->mutex);
}
+
+/* Verify that the cursor and the BtShared agree about what is the current
+** database connetion. This is important in shared-cache mode. If the database
+** connection pointers get out-of-sync, it is possible for routines like
+** btreeInitPage() to reference an stale connection pointer that references a
+** a connection that has already closed. This routine is used inside assert()
+** statements only and for the purpose of double-checking that the btree code
+** does keep the database connection pointers up-to-date.
+*/
+static int cursorOwnsBtShared(BtCursor *p){
+ assert( cursorHoldsMutex(p) );
+ return (p->pBtree->db==p->pBt->db);
+}
#endif
/*
*/
static void invalidateIncrblobCursors(
Btree *pBtree, /* The database file to check */
+ Pgno pgnoRoot, /* The table that might be changing */
i64 iRow, /* The rowid that might be changing */
int isClearTable /* True if all rows are being deleted */
){
for(p=pBtree->pBt->pCursor; p; p=p->pNext){
if( (p->curFlags & BTCF_Incrblob)!=0 ){
pBtree->hasIncrblobCur = 1;
- if( isClearTable || p->info.nKey==iRow ){
+ if( p->pgnoRoot==pgnoRoot && (isClearTable || p->info.nKey==iRow) ){
p->eState = CURSOR_INVALID;
}
}
#else
/* Stub function when INCRBLOB is omitted */
- #define invalidateIncrblobCursors(x,y,z)
+ #define invalidateIncrblobCursors(w,x,y,z)
#endif /* SQLITE_OMIT_INCRBLOB */
/*
assert( pgno<=pBt->nPage );
pBt->pHasContent = sqlite3BitvecCreate(pBt->nPage);
if( !pBt->pHasContent ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
}
if( rc==SQLITE_OK && pgno<=sqlite3BitvecSize(pBt->pHasContent) ){
*/
static void btreeReleaseAllCursorPages(BtCursor *pCur){
int i;
- for(i=0; i<=pCur->iPage; i++){
- releasePage(pCur->apPage[i]);
- pCur->apPage[i] = 0;
+ if( pCur->iPage>=0 ){
+ for(i=0; i<pCur->iPage; i++){
+ releasePageNotNull(pCur->apPage[i]);
+ }
+ releasePageNotNull(pCur->pPage);
+ pCur->iPage = -1;
}
- pCur->iPage = -1;
}
/*
** the key.
*/
static int saveCursorKey(BtCursor *pCur){
- int rc;
+ int rc = SQLITE_OK;
assert( CURSOR_VALID==pCur->eState );
assert( 0==pCur->pKey );
assert( cursorHoldsMutex(pCur) );
- rc = sqlite3BtreeKeySize(pCur, &pCur->nKey);
- assert( rc==SQLITE_OK ); /* KeySize() cannot fail */
-
- /* If this is an intKey table, then the above call to BtreeKeySize()
- ** stores the integer key in pCur->nKey. In this case this value is
- ** all that is required. Otherwise, if pCur is not open on an intKey
- ** table, then malloc space for and store the pCur->nKey bytes of key
- ** data. */
- if( 0==pCur->curIntKey ){
- void *pKey = sqlite3Malloc( pCur->nKey );
+ if( pCur->curIntKey ){
+ /* Only the rowid is required for a table btree */
+ pCur->nKey = sqlite3BtreeIntegerKey(pCur);
+ }else{
+ /* For an index btree, save the complete key content */
+ void *pKey;
+ pCur->nKey = sqlite3BtreePayloadSize(pCur);
+ pKey = sqlite3Malloc( pCur->nKey );
if( pKey ){
- rc = sqlite3BtreeKey(pCur, 0, (int)pCur->nKey, pKey);
+ rc = sqlite3BtreePayload(pCur, 0, (int)pCur->nKey, pKey);
if( rc==SQLITE_OK ){
pCur->pKey = pKey;
}else{
sqlite3_free(pKey);
}
}else{
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
}
assert( !pCur->curIntKey || !pCur->pKey );
return rc;
}
}else{
- testcase( p->iPage>0 );
+ testcase( p->iPage>=0 );
btreeReleaseAllCursorPages(p);
}
}
){
int rc; /* Status code */
UnpackedRecord *pIdxKey; /* Unpacked index key */
- char aSpace[200]; /* Temp space for pIdxKey - to avoid a malloc */
- char *pFree = 0;
if( pKey ){
assert( nKey==(i64)(int)nKey );
- pIdxKey = sqlite3VdbeAllocUnpackedRecord(
- pCur->pKeyInfo, aSpace, sizeof(aSpace), &pFree
- );
- if( pIdxKey==0 ) return SQLITE_NOMEM;
+ pIdxKey = sqlite3VdbeAllocUnpackedRecord(pCur->pKeyInfo);
+ if( pIdxKey==0 ) return SQLITE_NOMEM_BKPT;
sqlite3VdbeRecordUnpack(pCur->pKeyInfo, (int)nKey, pKey, pIdxKey);
if( pIdxKey->nField==0 ){
- sqlite3DbFree(pCur->pKeyInfo->db, pFree);
- return SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_BKPT;
+ goto moveto_done;
}
}else{
pIdxKey = 0;
}
rc = sqlite3BtreeMovetoUnpacked(pCur, pIdxKey, nKey, bias, pRes);
- if( pFree ){
- sqlite3DbFree(pCur->pKeyInfo->db, pFree);
+moveto_done:
+ if( pIdxKey ){
+ sqlite3DbFree(pCur->pKeyInfo->db, pIdxKey);
}
return rc;
}
static int btreeRestoreCursorPosition(BtCursor *pCur){
int rc;
int skipNext;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->eState>=CURSOR_REQUIRESEEK );
if( pCur->eState==CURSOR_FAULT ){
return pCur->skipNext;
return pCur->eState!=CURSOR_VALID;
}
+/*
+** Return a pointer to a fake BtCursor object that will always answer
+** false to the sqlite3BtreeCursorHasMoved() routine above. The fake
+** cursor returned must not be used with any other Btree interface.
+*/
+SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void){
+ static u8 fakeCursor = CURSOR_VALID;
+ assert( offsetof(BtCursor, eState)==0 );
+ return (BtCursor*)&fakeCursor;
+}
+
/*
** This routine restores a cursor back to its original position after it
** has been moved by some outside activity (such as a btree rebalance or
return SQLITE_OK;
}
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+/*
+** Provide hints to the cursor. The particular hint given (and the type
+** and number of the varargs parameters) is determined by the eHintType
+** parameter. See the definitions of the BTREE_HINT_* macros for details.
+*/
+SQLITE_PRIVATE void sqlite3BtreeCursorHint(BtCursor *pCur, int eHintType, ...){
+ /* Used only by system that substitute their own storage engine */
+}
+#endif
+
+/*
+** Provide flag hints to the cursor.
+*/
+SQLITE_PRIVATE void sqlite3BtreeCursorHintFlags(BtCursor *pCur, unsigned x){
+ assert( x==BTREE_SEEK_EQ || x==BTREE_BULKLOAD || x==0 );
+ pCur->hints = x;
+}
+
+
#ifndef SQLITE_OMIT_AUTOVACUUM
/*
** Given a page number of a regular database page, return the page
return;
}
iPtrmap = PTRMAP_PAGENO(pBt, key);
- rc = sqlite3PagerGet(pBt->pPager, iPtrmap, &pDbPage);
+ rc = sqlite3PagerGet(pBt->pPager, iPtrmap, &pDbPage, 0);
if( rc!=SQLITE_OK ){
*pRC = rc;
return;
assert( sqlite3_mutex_held(pBt->mutex) );
iPtrmap = PTRMAP_PAGENO(pBt, key);
- rc = sqlite3PagerGet(pBt->pPager, iPtrmap, &pDbPage);
+ rc = sqlite3PagerGet(pBt->pPager, iPtrmap, &pDbPage, 0);
if( rc!=0 ){
return rc;
}
if( pPgno ) *pPgno = get4byte(&pPtrmap[offset+1]);
sqlite3PagerUnref(pDbPage);
- if( *pEType<1 || *pEType>5 ) return SQLITE_CORRUPT_BKPT;
+ if( *pEType<1 || *pEType>5 ) return SQLITE_CORRUPT_PGNO(iPtrmap);
return SQLITE_OK;
}
}else{
pInfo->nLocal = (u16)minLocal;
}
- pInfo->iOverflow = (u16)(&pInfo->pPayload[pInfo->nLocal] - pCell);
- pInfo->nSize = pInfo->iOverflow + 4;
+ pInfo->nSize = (u16)(&pInfo->pPayload[pInfo->nLocal] - pCell) + 4;
}
/*
){
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
assert( pPage->leaf==0 );
- assert( pPage->noPayload );
assert( pPage->childPtrSize==4 );
#ifndef SQLITE_DEBUG
UNUSED_PARAMETER(pPage);
pInfo->nSize = 4 + getVarint(&pCell[4], (u64*)&pInfo->nKey);
pInfo->nPayload = 0;
pInfo->nLocal = 0;
- pInfo->iOverflow = 0;
pInfo->pPayload = 0;
return;
}
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
assert( pPage->leaf==0 || pPage->leaf==1 );
- assert( pPage->intKeyLeaf || pPage->noPayload );
- assert( pPage->noPayload==0 );
assert( pPage->intKeyLeaf );
assert( pPage->childPtrSize==0 );
pIter = pCell;
pInfo->nSize = nPayload + (u16)(pIter - pCell);
if( pInfo->nSize<4 ) pInfo->nSize = 4;
pInfo->nLocal = (u16)nPayload;
- pInfo->iOverflow = 0;
}else{
btreeParseCellAdjustSizeForOverflow(pPage, pCell, pInfo);
}
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
assert( pPage->leaf==0 || pPage->leaf==1 );
assert( pPage->intKeyLeaf==0 );
- assert( pPage->noPayload==0 );
pIter = pCell + pPage->childPtrSize;
nPayload = *pIter;
if( nPayload>=0x80 ){
pInfo->nSize = nPayload + (u16)(pIter - pCell);
if( pInfo->nSize<4 ) pInfo->nSize = 4;
pInfo->nLocal = (u16)nPayload;
- pInfo->iOverflow = 0;
}else{
btreeParseCellAdjustSizeForOverflow(pPage, pCell, pInfo);
}
pPage->xParseCell(pPage, pCell, &debuginfo);
#endif
- assert( pPage->noPayload==0 );
nSize = *pIter;
if( nSize>=0x80 ){
pEnd = &pIter[8];
if( *pRC ) return;
assert( pCell!=0 );
pPage->xParseCell(pPage, pCell, &info);
- if( info.iOverflow ){
- Pgno ovfl = get4byte(&pCell[info.iOverflow]);
+ if( info.nLocal<info.nPayload ){
+ Pgno ovfl = get4byte(&pCell[info.nSize-4]);
ptrmapPut(pPage->pBt, ovfl, PTRMAP_OVERFLOW1, pPage->pgno, pRC);
}
}
/*
-** Defragment the page given. All Cells are moved to the
-** end of the page and all free space is collected into one
-** big FreeBlk that occurs in between the header and cell
-** pointer array and the cell content area.
+** Defragment the page given. This routine reorganizes cells within the
+** page so that there are no free-blocks on the free-block list.
+**
+** Parameter nMaxFrag is the maximum amount of fragmented space that may be
+** present in the page after this routine returns.
**
** EVIDENCE-OF: R-44582-60138 SQLite may from time to time reorganize a
** b-tree page so that there are no freeblocks or fragment bytes, all
** unused bytes are contained in the unallocated space region, and all
** cells are packed tightly at the end of the page.
*/
-static int defragmentPage(MemPage *pPage){
+static int defragmentPage(MemPage *pPage, int nMaxFrag){
int i; /* Loop counter */
int pc; /* Address of the i-th cell */
int hdr; /* Offset to the page header */
int iCellFirst; /* First allowable cell index */
int iCellLast; /* Last possible cell index */
-
assert( sqlite3PagerIswriteable(pPage->pDbPage) );
assert( pPage->pBt!=0 );
assert( pPage->pBt->usableSize <= SQLITE_MAX_PAGE_SIZE );
cellOffset = pPage->cellOffset;
nCell = pPage->nCell;
assert( nCell==get2byte(&data[hdr+3]) );
+ iCellFirst = cellOffset + 2*nCell;
usableSize = pPage->pBt->usableSize;
+
+ /* This block handles pages with two or fewer free blocks and nMaxFrag
+ ** or fewer fragmented bytes. In this case it is faster to move the
+ ** two (or one) blocks of cells using memmove() and add the required
+ ** offsets to each pointer in the cell-pointer array than it is to
+ ** reconstruct the entire page. */
+ if( (int)data[hdr+7]<=nMaxFrag ){
+ int iFree = get2byte(&data[hdr+1]);
+ if( iFree ){
+ int iFree2 = get2byte(&data[iFree]);
+
+ /* pageFindSlot() has already verified that free blocks are sorted
+ ** in order of offset within the page, and that no block extends
+ ** past the end of the page. Provided the two free slots do not
+ ** overlap, this guarantees that the memmove() calls below will not
+ ** overwrite the usableSize byte buffer, even if the database page
+ ** is corrupt. */
+ assert( iFree2==0 || iFree2>iFree );
+ assert( iFree+get2byte(&data[iFree+2]) <= usableSize );
+ assert( iFree2==0 || iFree2+get2byte(&data[iFree2+2]) <= usableSize );
+
+ if( 0==iFree2 || (data[iFree2]==0 && data[iFree2+1]==0) ){
+ u8 *pEnd = &data[cellOffset + nCell*2];
+ u8 *pAddr;
+ int sz2 = 0;
+ int sz = get2byte(&data[iFree+2]);
+ int top = get2byte(&data[hdr+5]);
+ if( top>=iFree ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ if( iFree2 ){
+ assert( iFree+sz<=iFree2 ); /* Verified by pageFindSlot() */
+ sz2 = get2byte(&data[iFree2+2]);
+ assert( iFree+sz+sz2+iFree2-(iFree+sz) <= usableSize );
+ memmove(&data[iFree+sz+sz2], &data[iFree+sz], iFree2-(iFree+sz));
+ sz += sz2;
+ }
+ cbrk = top+sz;
+ assert( cbrk+(iFree-top) <= usableSize );
+ memmove(&data[cbrk], &data[top], iFree-top);
+ for(pAddr=&data[cellOffset]; pAddr<pEnd; pAddr+=2){
+ pc = get2byte(pAddr);
+ if( pc<iFree ){ put2byte(pAddr, pc+sz); }
+ else if( pc<iFree2 ){ put2byte(pAddr, pc+sz2); }
+ }
+ goto defragment_out;
+ }
+ }
+ }
+
cbrk = usableSize;
- iCellFirst = cellOffset + 2*nCell;
iCellLast = usableSize - 4;
for(i=0; i<nCell; i++){
u8 *pAddr; /* The i-th cell pointer */
** if PRAGMA cell_size_check=ON.
*/
if( pc<iCellFirst || pc>iCellLast ){
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
assert( pc>=iCellFirst && pc<=iCellLast );
size = pPage->xCellSize(pPage, &src[pc]);
cbrk -= size;
if( cbrk<iCellFirst || pc+size>usableSize ){
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
assert( cbrk+size<=usableSize && cbrk>=iCellFirst );
testcase( cbrk+size==usableSize );
}
memcpy(&data[cbrk], &src[pc], size);
}
+ data[hdr+7] = 0;
+
+ defragment_out:
+ if( data[hdr+7]+cbrk-iCellFirst!=pPage->nFree ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
assert( cbrk>=iCellFirst );
put2byte(&data[hdr+5], cbrk);
data[hdr+1] = 0;
data[hdr+2] = 0;
- data[hdr+7] = 0;
memset(&data[iCellFirst], 0, cbrk-iCellFirst);
assert( sqlite3PagerIswriteable(pPage->pDbPage) );
- if( cbrk-iCellFirst!=pPage->nFree ){
- return SQLITE_CORRUPT_BKPT;
- }
return SQLITE_OK;
}
int pc = get2byte(&aData[iAddr]);
int x;
int usableSize = pPg->pBt->usableSize;
+ int size; /* Size of the free slot */
assert( pc>0 );
- do{
- int size; /* Size of the free slot */
- /* EVIDENCE-OF: R-06866-39125 Freeblocks are always connected in order of
- ** increasing offset. */
- if( pc>usableSize-4 || pc<iAddr+4 ){
- *pRc = SQLITE_CORRUPT_BKPT;
- return 0;
- }
+ while( pc<=usableSize-4 ){
/* EVIDENCE-OF: R-22710-53328 The third and fourth bytes of each
** freeblock form a big-endian integer which is the size of the freeblock
** in bytes, including the 4-byte header. */
if( (x = size - nByte)>=0 ){
testcase( x==4 );
testcase( x==3 );
- if( pc < pPg->cellOffset+2*pPg->nCell || size+pc > usableSize ){
- *pRc = SQLITE_CORRUPT_BKPT;
+ if( size+pc > usableSize ){
+ *pRc = SQLITE_CORRUPT_PAGE(pPg);
return 0;
}else if( x<4 ){
/* EVIDENCE-OF: R-11498-58022 In a well-formed b-tree page, the total
}
iAddr = pc;
pc = get2byte(&aData[pc]);
- }while( pc );
+ if( pc<iAddr+size ) break;
+ }
+ if( pc ){
+ *pRc = SQLITE_CORRUPT_PAGE(pPg);
+ }
return 0;
}
if( top==0 && pPage->pBt->usableSize==65536 ){
top = 65536;
}else{
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
}
testcase( gap+2+nByte==top );
if( gap+2+nByte>top ){
assert( pPage->nCell>0 || CORRUPT_DB );
- rc = defragmentPage(pPage);
+ rc = defragmentPage(pPage, MIN(4, pPage->nFree - (2+nByte)));
if( rc ) return rc;
top = get2byteNotZero(&data[hdr+5]);
- assert( gap+nByte<=top );
+ assert( gap+2+nByte<=top );
}
u8 hdr; /* Page header size. 0 or 100 */
u8 nFrag = 0; /* Reduction in fragmentation */
u16 iOrigSize = iSize; /* Original value of iSize */
- u32 iLast = pPage->pBt->usableSize-4; /* Largest possible freeblock offset */
+ u16 x; /* Offset to cell content area */
u32 iEnd = iStart + iSize; /* First byte past the iStart buffer */
unsigned char *data = pPage->aData; /* Page content */
assert( CORRUPT_DB || iEnd <= pPage->pBt->usableSize );
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
assert( iSize>=4 ); /* Minimum cell size is 4 */
- assert( iStart<=iLast );
-
- /* Overwrite deleted information with zeros when the secure_delete
- ** option is enabled */
- if( pPage->pBt->btsFlags & BTS_SECURE_DELETE ){
- memset(&data[iStart], 0, iSize);
- }
+ assert( iStart<=pPage->pBt->usableSize-4 );
/* The list of freeblocks must be in ascending order. Find the
** spot on the list where iStart should be inserted.
if( data[iPtr+1]==0 && data[iPtr]==0 ){
iFreeBlk = 0; /* Shortcut for the case when the freelist is empty */
}else{
- while( (iFreeBlk = get2byte(&data[iPtr]))>0 && iFreeBlk<iStart ){
- if( iFreeBlk<iPtr+4 ) return SQLITE_CORRUPT_BKPT;
+ while( (iFreeBlk = get2byte(&data[iPtr]))<iStart ){
+ if( iFreeBlk<iPtr+4 ){
+ if( iFreeBlk==0 ) break;
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
iPtr = iFreeBlk;
}
- if( iFreeBlk>iLast ) return SQLITE_CORRUPT_BKPT;
+ if( iFreeBlk>pPage->pBt->usableSize-4 ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
assert( iFreeBlk>iPtr || iFreeBlk==0 );
/* At this point:
*/
if( iFreeBlk && iEnd+3>=iFreeBlk ){
nFrag = iFreeBlk - iEnd;
- if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_BKPT;
+ if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_PAGE(pPage);
iEnd = iFreeBlk + get2byte(&data[iFreeBlk+2]);
- if( iEnd > pPage->pBt->usableSize ) return SQLITE_CORRUPT_BKPT;
+ if( iEnd > pPage->pBt->usableSize ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
iSize = iEnd - iStart;
iFreeBlk = get2byte(&data[iFreeBlk]);
}
if( iPtr>hdr+1 ){
int iPtrEnd = iPtr + get2byte(&data[iPtr+2]);
if( iPtrEnd+3>=iStart ){
- if( iPtrEnd>iStart ) return SQLITE_CORRUPT_BKPT;
+ if( iPtrEnd>iStart ) return SQLITE_CORRUPT_PAGE(pPage);
nFrag += iStart - iPtrEnd;
iSize = iEnd - iPtr;
iStart = iPtr;
}
}
- if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_BKPT;
+ if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_PAGE(pPage);
data[hdr+7] -= nFrag;
}
- if( iStart==get2byte(&data[hdr+5]) ){
+ x = get2byte(&data[hdr+5]);
+ if( iStart<=x ){
/* The new freeblock is at the beginning of the cell content area,
** so just extend the cell content area rather than create another
** freelist entry */
- if( iPtr!=hdr+1 ) return SQLITE_CORRUPT_BKPT;
+ if( iStart<x || iPtr!=hdr+1 ) return SQLITE_CORRUPT_PAGE(pPage);
put2byte(&data[hdr+1], iFreeBlk);
put2byte(&data[hdr+5], iEnd);
}else{
/* Insert the new freeblock into the freelist */
put2byte(&data[iPtr], iStart);
- put2byte(&data[iStart], iFreeBlk);
- put2byte(&data[iStart+2], iSize);
}
+ if( pPage->pBt->btsFlags & BTS_FAST_SECURE ){
+ /* Overwrite deleted information with zeros when the secure_delete
+ ** option is enabled */
+ memset(&data[iStart], 0, iSize);
+ }
+ put2byte(&data[iStart], iFreeBlk);
+ put2byte(&data[iStart+2], iSize);
pPage->nFree += iOrigSize;
return SQLITE_OK;
}
pPage->xCellSize = cellSizePtr;
pBt = pPage->pBt;
if( flagByte==(PTF_LEAFDATA | PTF_INTKEY) ){
- /* EVIDENCE-OF: R-03640-13415 A value of 5 means the page is an interior
- ** table b-tree page. */
+ /* EVIDENCE-OF: R-07291-35328 A value of 5 (0x05) means the page is an
+ ** interior table b-tree page. */
assert( (PTF_LEAFDATA|PTF_INTKEY)==5 );
- /* EVIDENCE-OF: R-20501-61796 A value of 13 means the page is a leaf
- ** table b-tree page. */
+ /* EVIDENCE-OF: R-26900-09176 A value of 13 (0x0d) means the page is a
+ ** leaf table b-tree page. */
assert( (PTF_LEAFDATA|PTF_INTKEY|PTF_LEAF)==13 );
pPage->intKey = 1;
if( pPage->leaf ){
pPage->intKeyLeaf = 1;
- pPage->noPayload = 0;
pPage->xParseCell = btreeParseCellPtr;
}else{
pPage->intKeyLeaf = 0;
- pPage->noPayload = 1;
pPage->xCellSize = cellSizePtrNoPayload;
pPage->xParseCell = btreeParseCellPtrNoPayload;
}
pPage->maxLocal = pBt->maxLeaf;
pPage->minLocal = pBt->minLeaf;
}else if( flagByte==PTF_ZERODATA ){
- /* EVIDENCE-OF: R-27225-53936 A value of 2 means the page is an interior
- ** index b-tree page. */
+ /* EVIDENCE-OF: R-43316-37308 A value of 2 (0x02) means the page is an
+ ** interior index b-tree page. */
assert( (PTF_ZERODATA)==2 );
- /* EVIDENCE-OF: R-16571-11615 A value of 10 means the page is a leaf
- ** index b-tree page. */
+ /* EVIDENCE-OF: R-59615-42828 A value of 10 (0x0a) means the page is a
+ ** leaf index b-tree page. */
assert( (PTF_ZERODATA|PTF_LEAF)==10 );
pPage->intKey = 0;
pPage->intKeyLeaf = 0;
- pPage->noPayload = 0;
pPage->xParseCell = btreeParseCellPtrIndex;
pPage->maxLocal = pBt->maxLocal;
pPage->minLocal = pBt->minLocal;
}else{
/* EVIDENCE-OF: R-47608-56469 Any other value for the b-tree page type is
** an error. */
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
pPage->max1bytePayload = pBt->max1bytePayload;
return SQLITE_OK;
** we failed to detect any corruption.
*/
static int btreeInitPage(MemPage *pPage){
+ int pc; /* Address of a freeblock within pPage->aData[] */
+ u8 hdr; /* Offset to beginning of page header */
+ u8 *data; /* Equal to pPage->aData */
+ BtShared *pBt; /* The main btree structure */
+ int usableSize; /* Amount of usable space on each page */
+ u16 cellOffset; /* Offset from start of page to first cell pointer */
+ int nFree; /* Number of unused bytes on the page */
+ int top; /* First byte of the cell content area */
+ int iCellFirst; /* First allowable cell or freeblock offset */
+ int iCellLast; /* Last possible cell or freeblock offset */
assert( pPage->pBt!=0 );
assert( pPage->pBt->db!=0 );
assert( pPage->pgno==sqlite3PagerPagenumber(pPage->pDbPage) );
assert( pPage == sqlite3PagerGetExtra(pPage->pDbPage) );
assert( pPage->aData == sqlite3PagerGetData(pPage->pDbPage) );
+ assert( pPage->isInit==0 );
- if( !pPage->isInit ){
- u16 pc; /* Address of a freeblock within pPage->aData[] */
- u8 hdr; /* Offset to beginning of page header */
- u8 *data; /* Equal to pPage->aData */
- BtShared *pBt; /* The main btree structure */
- int usableSize; /* Amount of usable space on each page */
- u16 cellOffset; /* Offset from start of page to first cell pointer */
- int nFree; /* Number of unused bytes on the page */
- int top; /* First byte of the cell content area */
- int iCellFirst; /* First allowable cell or freeblock offset */
- int iCellLast; /* Last possible cell or freeblock offset */
-
- pBt = pPage->pBt;
-
- hdr = pPage->hdrOffset;
- data = pPage->aData;
- /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating
- ** the b-tree page type. */
- if( decodeFlags(pPage, data[hdr]) ) return SQLITE_CORRUPT_BKPT;
- assert( pBt->pageSize>=512 && pBt->pageSize<=65536 );
- pPage->maskPage = (u16)(pBt->pageSize - 1);
- pPage->nOverflow = 0;
- usableSize = pBt->usableSize;
- pPage->cellOffset = cellOffset = hdr + 8 + pPage->childPtrSize;
- pPage->aDataEnd = &data[usableSize];
- pPage->aCellIdx = &data[cellOffset];
- pPage->aDataOfst = &data[pPage->childPtrSize];
- /* EVIDENCE-OF: R-58015-48175 The two-byte integer at offset 5 designates
- ** the start of the cell content area. A zero value for this integer is
- ** interpreted as 65536. */
- top = get2byteNotZero(&data[hdr+5]);
- /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the
- ** number of cells on the page. */
- pPage->nCell = get2byte(&data[hdr+3]);
- if( pPage->nCell>MX_CELL(pBt) ){
- /* To many cells for a single page. The page must be corrupt */
- return SQLITE_CORRUPT_BKPT;
+ pBt = pPage->pBt;
+ hdr = pPage->hdrOffset;
+ data = pPage->aData;
+ /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating
+ ** the b-tree page type. */
+ if( decodeFlags(pPage, data[hdr]) ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ assert( pBt->pageSize>=512 && pBt->pageSize<=65536 );
+ pPage->maskPage = (u16)(pBt->pageSize - 1);
+ pPage->nOverflow = 0;
+ usableSize = pBt->usableSize;
+ pPage->cellOffset = cellOffset = hdr + 8 + pPage->childPtrSize;
+ pPage->aDataEnd = &data[usableSize];
+ pPage->aCellIdx = &data[cellOffset];
+ pPage->aDataOfst = &data[pPage->childPtrSize];
+ /* EVIDENCE-OF: R-58015-48175 The two-byte integer at offset 5 designates
+ ** the start of the cell content area. A zero value for this integer is
+ ** interpreted as 65536. */
+ top = get2byteNotZero(&data[hdr+5]);
+ /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the
+ ** number of cells on the page. */
+ pPage->nCell = get2byte(&data[hdr+3]);
+ if( pPage->nCell>MX_CELL(pBt) ){
+ /* To many cells for a single page. The page must be corrupt */
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ testcase( pPage->nCell==MX_CELL(pBt) );
+ /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only
+ ** possible for a root page of a table that contains no rows) then the
+ ** offset to the cell content area will equal the page size minus the
+ ** bytes of reserved space. */
+ assert( pPage->nCell>0 || top==usableSize || CORRUPT_DB );
+
+ /* A malformed database page might cause us to read past the end
+ ** of page when parsing a cell.
+ **
+ ** The following block of code checks early to see if a cell extends
+ ** past the end of a page boundary and causes SQLITE_CORRUPT to be
+ ** returned if it does.
+ */
+ iCellFirst = cellOffset + 2*pPage->nCell;
+ iCellLast = usableSize - 4;
+ if( pBt->db->flags & SQLITE_CellSizeCk ){
+ int i; /* Index into the cell pointer array */
+ int sz; /* Size of a cell */
+
+ if( !pPage->leaf ) iCellLast--;
+ for(i=0; i<pPage->nCell; i++){
+ pc = get2byteAligned(&data[cellOffset+i*2]);
+ testcase( pc==iCellFirst );
+ testcase( pc==iCellLast );
+ if( pc<iCellFirst || pc>iCellLast ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ sz = pPage->xCellSize(pPage, &data[pc]);
+ testcase( pc+sz==usableSize );
+ if( pc+sz>usableSize ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
}
- testcase( pPage->nCell==MX_CELL(pBt) );
- /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only
- ** possible for a root page of a table that contains no rows) then the
- ** offset to the cell content area will equal the page size minus the
- ** bytes of reserved space. */
- assert( pPage->nCell>0 || top==usableSize || CORRUPT_DB );
-
- /* A malformed database page might cause us to read past the end
- ** of page when parsing a cell.
- **
- ** The following block of code checks early to see if a cell extends
- ** past the end of a page boundary and causes SQLITE_CORRUPT to be
- ** returned if it does.
- */
- iCellFirst = cellOffset + 2*pPage->nCell;
- iCellLast = usableSize - 4;
- if( pBt->db->flags & SQLITE_CellSizeCk ){
- int i; /* Index into the cell pointer array */
- int sz; /* Size of a cell */
-
- if( !pPage->leaf ) iCellLast--;
- for(i=0; i<pPage->nCell; i++){
- pc = get2byteAligned(&data[cellOffset+i*2]);
- testcase( pc==iCellFirst );
- testcase( pc==iCellLast );
- if( pc<iCellFirst || pc>iCellLast ){
- return SQLITE_CORRUPT_BKPT;
- }
- sz = pPage->xCellSize(pPage, &data[pc]);
- testcase( pc+sz==usableSize );
- if( pc+sz>usableSize ){
- return SQLITE_CORRUPT_BKPT;
- }
- }
- if( !pPage->leaf ) iCellLast++;
- }
+ if( !pPage->leaf ) iCellLast++;
+ }
- /* Compute the total free space on the page
- ** EVIDENCE-OF: R-23588-34450 The two-byte integer at offset 1 gives the
- ** start of the first freeblock on the page, or is zero if there are no
- ** freeblocks. */
- pc = get2byte(&data[hdr+1]);
- nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */
- while( pc>0 ){
- u16 next, size;
- if( pc<iCellFirst || pc>iCellLast ){
- /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will
- ** always be at least one cell before the first freeblock.
- **
- ** Or, the freeblock is off the end of the page
- */
- return SQLITE_CORRUPT_BKPT;
+ /* Compute the total free space on the page
+ ** EVIDENCE-OF: R-23588-34450 The two-byte integer at offset 1 gives the
+ ** start of the first freeblock on the page, or is zero if there are no
+ ** freeblocks. */
+ pc = get2byte(&data[hdr+1]);
+ nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */
+ if( pc>0 ){
+ u32 next, size;
+ if( pc<iCellFirst ){
+ /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will
+ ** always be at least one cell before the first freeblock.
+ */
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ while( 1 ){
+ if( pc>iCellLast ){
+ /* Freeblock off the end of the page */
+ return SQLITE_CORRUPT_PAGE(pPage);
}
next = get2byte(&data[pc]);
size = get2byte(&data[pc+2]);
- if( (next>0 && next<=pc+size+3) || pc+size>usableSize ){
- /* Free blocks must be in ascending order. And the last byte of
- ** the free-block must lie on the database page. */
- return SQLITE_CORRUPT_BKPT;
- }
nFree = nFree + size;
+ if( next<=pc+size+3 ) break;
pc = next;
}
-
- /* At this point, nFree contains the sum of the offset to the start
- ** of the cell-content area plus the number of free bytes within
- ** the cell-content area. If this is greater than the usable-size
- ** of the page, then the page must be corrupted. This check also
- ** serves to verify that the offset to the start of the cell-content
- ** area, according to the page header, lies within the page.
- */
- if( nFree>usableSize ){
- return SQLITE_CORRUPT_BKPT;
+ if( next>0 ){
+ /* Freeblock not in ascending order */
+ return SQLITE_CORRUPT_PAGE(pPage);
}
- pPage->nFree = (u16)(nFree - iCellFirst);
- pPage->isInit = 1;
+ if( pc+size>(unsigned int)usableSize ){
+ /* Last freeblock extends past page end */
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ }
+
+ /* At this point, nFree contains the sum of the offset to the start
+ ** of the cell-content area plus the number of free bytes within
+ ** the cell-content area. If this is greater than the usable-size
+ ** of the page, then the page must be corrupted. This check also
+ ** serves to verify that the offset to the start of the cell-content
+ ** area, according to the page header, lies within the page.
+ */
+ if( nFree>usableSize ){
+ return SQLITE_CORRUPT_PAGE(pPage);
}
+ pPage->nFree = (u16)(nFree - iCellFirst);
+ pPage->isInit = 1;
return SQLITE_OK;
}
assert( sqlite3PagerGetData(pPage->pDbPage) == data );
assert( sqlite3PagerIswriteable(pPage->pDbPage) );
assert( sqlite3_mutex_held(pBt->mutex) );
- if( pBt->btsFlags & BTS_SECURE_DELETE ){
+ if( pBt->btsFlags & BTS_FAST_SECURE ){
memset(&data[hdr], 0, pBt->usableSize - hdr);
}
data[hdr] = (char)flags;
*/
static MemPage *btreePageFromDbPage(DbPage *pDbPage, Pgno pgno, BtShared *pBt){
MemPage *pPage = (MemPage*)sqlite3PagerGetExtra(pDbPage);
- pPage->aData = sqlite3PagerGetData(pDbPage);
- pPage->pDbPage = pDbPage;
- pPage->pBt = pBt;
- pPage->pgno = pgno;
- pPage->hdrOffset = pgno==1 ? 100 : 0;
+ if( pgno!=pPage->pgno ){
+ pPage->aData = sqlite3PagerGetData(pDbPage);
+ pPage->pDbPage = pDbPage;
+ pPage->pBt = pBt;
+ pPage->pgno = pgno;
+ pPage->hdrOffset = pgno==1 ? 100 : 0;
+ }
+ assert( pPage->aData==sqlite3PagerGetData(pDbPage) );
return pPage;
}
assert( flags==0 || flags==PAGER_GET_NOCONTENT || flags==PAGER_GET_READONLY );
assert( sqlite3_mutex_held(pBt->mutex) );
- rc = sqlite3PagerAcquire(pBt->pPager, pgno, (DbPage**)&pDbPage, flags);
+ rc = sqlite3PagerGet(pBt->pPager, pgno, (DbPage**)&pDbPage, flags);
if( rc ) return rc;
*ppPage = btreePageFromDbPage(pDbPage, pgno, pBt);
return SQLITE_OK;
}
SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree *p){
assert( sqlite3BtreeHoldsMutex(p) );
- assert( ((p->pBt->nPage)&0x8000000)==0 );
+ assert( ((p->pBt->nPage)&0x80000000)==0 );
return btreePagecount(p->pBt);
}
int rc;
DbPage *pDbPage;
assert( sqlite3_mutex_held(pBt->mutex) );
- assert( pCur==0 || ppPage==&pCur->apPage[pCur->iPage] );
+ assert( pCur==0 || ppPage==&pCur->pPage );
assert( pCur==0 || bReadOnly==pCur->curPagerFlags );
assert( pCur==0 || pCur->iPage>0 );
rc = SQLITE_CORRUPT_BKPT;
goto getAndInitPage_error;
}
- rc = sqlite3PagerAcquire(pBt->pPager, pgno, (DbPage**)&pDbPage, bReadOnly);
+ rc = sqlite3PagerGet(pBt->pPager, pgno, (DbPage**)&pDbPage, bReadOnly);
if( rc ){
goto getAndInitPage_error;
}
- *ppPage = btreePageFromDbPage(pDbPage, pgno, pBt);
+ *ppPage = (MemPage*)sqlite3PagerGetExtra(pDbPage);
if( (*ppPage)->isInit==0 ){
+ btreePageFromDbPage(pDbPage, pgno, pBt);
rc = btreeInitPage(*ppPage);
if( rc!=SQLITE_OK ){
releasePage(*ppPage);
goto getAndInitPage_error;
}
}
+ assert( (*ppPage)->pgno==pgno );
+ assert( (*ppPage)->aData==sqlite3PagerGetData(pDbPage) );
/* If obtaining a child page for a cursor, we must verify that the page is
** compatible with the root page. */
- if( pCur
- && ((*ppPage)->nCell<1 || (*ppPage)->intKey!=pCur->curIntKey)
- ){
- rc = SQLITE_CORRUPT_BKPT;
+ if( pCur && ((*ppPage)->nCell<1 || (*ppPage)->intKey!=pCur->curIntKey) ){
+ rc = SQLITE_CORRUPT_PGNO(pgno);
releasePage(*ppPage);
goto getAndInitPage_error;
}
return SQLITE_OK;
getAndInitPage_error:
- if( pCur ) pCur->iPage--;
+ if( pCur ){
+ pCur->iPage--;
+ pCur->pPage = pCur->apPage[pCur->iPage];
+ }
testcase( pgno==0 );
assert( pgno!=0 || rc==SQLITE_CORRUPT );
return rc;
/*
** Release a MemPage. This should be called once for each prior
** call to btreeGetPage.
+**
+** Page1 is a special case and must be released using releasePageOne().
*/
static void releasePageNotNull(MemPage *pPage){
assert( pPage->aData );
static void releasePage(MemPage *pPage){
if( pPage ) releasePageNotNull(pPage);
}
+static void releasePageOne(MemPage *pPage){
+ assert( pPage!=0 );
+ assert( pPage->aData );
+ assert( pPage->pBt );
+ assert( pPage->pDbPage!=0 );
+ assert( sqlite3PagerGetExtra(pPage->pDbPage) == (void*)pPage );
+ assert( sqlite3PagerGetData(pPage->pDbPage)==pPage->aData );
+ assert( sqlite3_mutex_held(pPage->pBt->mutex) );
+ sqlite3PagerUnrefPageOne(pPage->pDbPage);
+}
/*
** Get an unused page.
BtShared *pBt = (BtShared*)pArg;
assert( pBt->db );
assert( sqlite3_mutex_held(pBt->db->mutex) );
- return sqlite3InvokeBusyHandler(&pBt->db->busyHandler);
+ return sqlite3InvokeBusyHandler(&pBt->db->busyHandler,
+ sqlite3PagerFile(pBt->pPager));
}
/*
}
p = sqlite3MallocZero(sizeof(Btree));
if( !p ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
p->inTrans = TRANS_NONE;
p->db = db;
p->sharable = 1;
if( !zFullPathname ){
sqlite3_free(p);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
if( isMemdb ){
memcpy(zFullPathname, zFilename, nFilename);
pBt = sqlite3MallocZero( sizeof(*pBt) );
if( pBt==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto btree_open_out;
}
rc = sqlite3PagerOpen(pVfs, &pBt->pPager, zFilename,
- EXTRA_SIZE, flags, vfsFlags, pageReinit);
+ sizeof(MemPage), flags, vfsFlags, pageReinit);
if( rc==SQLITE_OK ){
sqlite3PagerSetMmapLimit(pBt->pPager, db->szMmap);
rc = sqlite3PagerReadFileheader(pBt->pPager,sizeof(zDbHeader),zDbHeader);
}
pBt->openFlags = (u8)flags;
pBt->db = db;
- sqlite3PagerSetBusyhandler(pBt->pPager, btreeInvokeBusyHandler, pBt);
+ sqlite3PagerSetBusyHandler(pBt->pPager, btreeInvokeBusyHandler, pBt);
p->pBt = pBt;
pBt->pCursor = 0;
pBt->pPage1 = 0;
if( sqlite3PagerIsreadonly(pBt->pPager) ) pBt->btsFlags |= BTS_READ_ONLY;
-#ifdef SQLITE_SECURE_DELETE
+#if defined(SQLITE_SECURE_DELETE)
pBt->btsFlags |= BTS_SECURE_DELETE;
+#elif defined(SQLITE_FAST_SECURE_DELETE)
+ pBt->btsFlags |= BTS_OVERWRITE;
#endif
/* EVIDENCE-OF: R-51873-39618 The page size for a database file is
** determined by the 2-byte integer located at an offset of 16 bytes from
#if !defined(SQLITE_OMIT_SHARED_CACHE) && !defined(SQLITE_OMIT_DISKIO)
/* Add the new BtShared object to the linked list sharable BtShareds.
*/
+ pBt->nRef = 1;
if( p->sharable ){
MUTEX_LOGIC( sqlite3_mutex *mutexShared; )
- pBt->nRef = 1;
MUTEX_LOGIC( mutexShared = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);)
if( SQLITE_THREADSAFE && sqlite3GlobalConfig.bCoreMutex ){
pBt->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_FAST);
if( pBt->mutex==0 ){
- rc = SQLITE_NOMEM;
- db->mallocFailed = 0;
+ rc = SQLITE_NOMEM_BKPT;
goto btree_open_out;
}
}
for(i=0; i<db->nDb; i++){
if( (pSib = db->aDb[i].pBt)!=0 && pSib->sharable ){
while( pSib->pPrev ){ pSib = pSib->pPrev; }
- if( p->pBt<pSib->pBt ){
+ if( (uptr)p->pBt<(uptr)pSib->pBt ){
p->pNext = pSib;
p->pPrev = 0;
pSib->pPrev = p;
}else{
- while( pSib->pNext && pSib->pNext->pBt<p->pBt ){
+ while( pSib->pNext && (uptr)pSib->pNext->pBt<(uptr)p->pBt ){
pSib = pSib->pNext;
}
p->pNext = pSib->pNext;
btree_open_out:
if( rc!=SQLITE_OK ){
if( pBt && pBt->pPager ){
- sqlite3PagerClose(pBt->pPager);
+ sqlite3PagerClose(pBt->pPager, 0);
}
sqlite3_free(pBt);
sqlite3_free(p);
*ppBtree = 0;
}else{
+ sqlite3_file *pFile;
+
/* If the B-Tree was successfully opened, set the pager-cache size to the
** default value. Except, when opening on an existing shared pager-cache,
** do not change the pager-cache size.
if( sqlite3BtreeSchema(p, 0, 0)==0 ){
sqlite3PagerSetCachesize(p->pBt->pPager, SQLITE_DEFAULT_CACHE_SIZE);
}
+
+ pFile = sqlite3PagerFile(pBt->pPager);
+ if( pFile->pMethods ){
+ sqlite3OsFileControlHint(pFile, SQLITE_FCNTL_PDB, (void*)&pBt->db);
+ }
}
if( mutexOpen ){
assert( sqlite3_mutex_held(mutexOpen) );
sqlite3_mutex_leave(mutexOpen);
}
+ assert( rc!=SQLITE_OK || sqlite3BtreeConnectionCount(*ppBtree)>0 );
return rc;
}
** Clean out and delete the BtShared object.
*/
assert( !pBt->pCursor );
- sqlite3PagerClose(pBt->pPager);
+ sqlite3PagerClose(pBt->pPager, p->db);
if( pBt->xFreeSchema && pBt->pSchema ){
pBt->xFreeSchema(pBt->pSchema);
}
}
/*
-** Change the limit on the number of pages allowed in the cache.
-**
-** The maximum number of cache pages is set to the absolute
-** value of mxPage. If mxPage is negative, the pager will
-** operate asynchronously - it will not stop to do fsync()s
-** to insure data is written to the disk surface before
-** continuing. Transactions still work if synchronous is off,
-** and the database cannot be corrupted if this program
-** crashes. But if the operating system crashes or there is
-** an abrupt power failure when synchronous is off, the database
-** could be left in an inconsistent and unrecoverable state.
-** Synchronous is on by default so database corruption is not
-** normally a worry.
+** Change the "soft" limit on the number of pages in the cache.
+** Unused and unmodified pages will be recycled when the number of
+** pages in the cache exceeds this soft limit. But the size of the
+** cache is allowed to grow larger than this limit if it contains
+** dirty pages or pages still in active use.
*/
SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree *p, int mxPage){
BtShared *pBt = p->pBt;
return SQLITE_OK;
}
+/*
+** Change the "spill" limit on the number of pages in the cache.
+** If the number of pages exceeds this limit during a write transaction,
+** the pager might attempt to "spill" pages to the journal early in
+** order to free up memory.
+**
+** The value returned is the current spill size. If zero is passed
+** as an argument, no changes are made to the spill size setting, so
+** using mxPage of 0 is a way to query the current spill size.
+*/
+SQLITE_PRIVATE int sqlite3BtreeSetSpillSize(Btree *p, int mxPage){
+ BtShared *pBt = p->pBt;
+ int res;
+ assert( sqlite3_mutex_held(p->db->mutex) );
+ sqlite3BtreeEnter(p);
+ res = sqlite3PagerSetSpillsize(pBt->pPager, mxPage);
+ sqlite3BtreeLeave(p);
+ return res;
+}
+
#if SQLITE_MAX_MMAP_SIZE>0
/*
** Change the limit on the amount of the database file that may be
}
#endif
-/*
-** Return TRUE if the given btree is set to safety level 1. In other
-** words, return TRUE if no sync() occurs on the disk files.
-*/
-SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree *p){
- BtShared *pBt = p->pBt;
- int rc;
- assert( sqlite3_mutex_held(p->db->mutex) );
- sqlite3BtreeEnter(p);
- assert( pBt && pBt->pPager );
- rc = sqlite3PagerNosync(pBt->pPager);
- sqlite3BtreeLeave(p);
- return rc;
-}
-
/*
** Change the default pages size and the number of reserved bytes per page.
** Or, if the page size has already been fixed, return SQLITE_READONLY
}
/*
-** Set the BTS_SECURE_DELETE flag if newFlag is 0 or 1. If newFlag is -1,
-** then make no changes. Always return the value of the BTS_SECURE_DELETE
-** setting after the change.
+** Change the values for the BTS_SECURE_DELETE and BTS_OVERWRITE flags:
+**
+** newFlag==0 Both BTS_SECURE_DELETE and BTS_OVERWRITE are cleared
+** newFlag==1 BTS_SECURE_DELETE set and BTS_OVERWRITE is cleared
+** newFlag==2 BTS_SECURE_DELETE cleared and BTS_OVERWRITE is set
+** newFlag==(-1) No changes
+**
+** This routine acts as a query if newFlag is less than zero
+**
+** With BTS_OVERWRITE set, deleted content is overwritten by zeros, but
+** freelist leaf pages are not written back to the database. Thus in-page
+** deleted content is cleared, but freelist deleted content is not.
+**
+** With BTS_SECURE_DELETE, operation is like BTS_OVERWRITE with the addition
+** that freelist leaf pages are written back into the database, increasing
+** the amount of disk I/O.
*/
SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree *p, int newFlag){
int b;
if( p==0 ) return 0;
sqlite3BtreeEnter(p);
+ assert( BTS_OVERWRITE==BTS_SECURE_DELETE*2 );
+ assert( BTS_FAST_SECURE==(BTS_OVERWRITE|BTS_SECURE_DELETE) );
if( newFlag>=0 ){
- p->pBt->btsFlags &= ~BTS_SECURE_DELETE;
- if( newFlag ) p->pBt->btsFlags |= BTS_SECURE_DELETE;
- }
- b = (p->pBt->btsFlags & BTS_SECURE_DELETE)!=0;
+ p->pBt->btsFlags &= ~BTS_FAST_SECURE;
+ p->pBt->btsFlags |= BTS_SECURE_DELETE*newFlag;
+ }
+ b = (p->pBt->btsFlags & BTS_FAST_SECURE)/BTS_SECURE_DELETE;
sqlite3BtreeLeave(p);
return b;
}
#endif
}
+/*
+** If the user has not set the safety-level for this database connection
+** using "PRAGMA synchronous", and if the safety-level is not already
+** set to the value passed to this function as the second parameter,
+** set it so.
+*/
+#if SQLITE_DEFAULT_SYNCHRONOUS!=SQLITE_DEFAULT_WAL_SYNCHRONOUS \
+ && !defined(SQLITE_OMIT_WAL)
+static void setDefaultSyncFlag(BtShared *pBt, u8 safety_level){
+ sqlite3 *db;
+ Db *pDb;
+ if( (db=pBt->db)!=0 && (pDb=db->aDb)!=0 ){
+ while( pDb->pBt==0 || pDb->pBt->pBt!=pBt ){ pDb++; }
+ if( pDb->bSyncSet==0
+ && pDb->safety_level!=safety_level
+ && pDb!=&db->aDb[1]
+ ){
+ pDb->safety_level = safety_level;
+ sqlite3PagerSetFlags(pBt->pPager,
+ pDb->safety_level | (db->flags & PAGER_FLAGS_MASK));
+ }
+ }
+}
+#else
+# define setDefaultSyncFlag(pBt,safety_level)
+#endif
/*
** Get a reference to pPage1 of the database file. This will
rc = sqlite3PagerOpenWal(pBt->pPager, &isOpen);
if( rc!=SQLITE_OK ){
goto page1_init_failed;
- }else if( isOpen==0 ){
- releasePage(pPage1);
- return SQLITE_OK;
+ }else{
+ setDefaultSyncFlag(pBt, SQLITE_DEFAULT_WAL_SYNCHRONOUS+1);
+ if( isOpen==0 ){
+ releasePageOne(pPage1);
+ return SQLITE_OK;
+ }
}
rc = SQLITE_NOTADB;
+ }else{
+ setDefaultSyncFlag(pBt, SQLITE_DEFAULT_SYNCHRONOUS+1);
}
#endif
** zero and return SQLITE_OK. The caller will call this function
** again with the correct page-size.
*/
- releasePage(pPage1);
+ releasePageOne(pPage1);
pBt->usableSize = usableSize;
pBt->pageSize = pageSize;
freeTempSpace(pBt);
pageSize-usableSize);
return rc;
}
- if( (pBt->db->flags & SQLITE_RecoveryMode)==0 && nPage>nPageFile ){
+ if( (pBt->db->flags & SQLITE_WriteSchema)==0 && nPage>nPageFile ){
rc = SQLITE_CORRUPT_BKPT;
goto page1_init_failed;
}
return SQLITE_OK;
page1_init_failed:
- releasePage(pPage1);
+ releasePageOne(pPage1);
pBt->pPage1 = 0;
return rc;
}
assert( pPage1->aData );
assert( sqlite3PagerRefcount(pBt->pPager)==1 );
pBt->pPage1 = 0;
- releasePageNotNull(pPage1);
+ releasePageOne(pPage1);
}
}
** proceed.
*/
SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree *p, int wrflag){
- sqlite3 *pBlock = 0;
BtShared *pBt = p->pBt;
int rc = SQLITE_OK;
}
#ifndef SQLITE_OMIT_SHARED_CACHE
- /* If another database handle has already opened a write transaction
- ** on this shared-btree structure and a second write transaction is
- ** requested, return SQLITE_LOCKED.
- */
- if( (wrflag && pBt->inTransaction==TRANS_WRITE)
- || (pBt->btsFlags & BTS_PENDING)!=0
- ){
- pBlock = pBt->pWriter->db;
- }else if( wrflag>1 ){
- BtLock *pIter;
- for(pIter=pBt->pLock; pIter; pIter=pIter->pNext){
- if( pIter->pBtree!=p ){
- pBlock = pIter->pBtree->db;
- break;
+ {
+ sqlite3 *pBlock = 0;
+ /* If another database handle has already opened a write transaction
+ ** on this shared-btree structure and a second write transaction is
+ ** requested, return SQLITE_LOCKED.
+ */
+ if( (wrflag && pBt->inTransaction==TRANS_WRITE)
+ || (pBt->btsFlags & BTS_PENDING)!=0
+ ){
+ pBlock = pBt->pWriter->db;
+ }else if( wrflag>1 ){
+ BtLock *pIter;
+ for(pIter=pBt->pLock; pIter; pIter=pIter->pNext){
+ if( pIter->pBtree!=p ){
+ pBlock = pIter->pBtree->db;
+ break;
+ }
}
}
- }
- if( pBlock ){
- sqlite3ConnectionBlocked(p->db, pBlock);
- rc = SQLITE_LOCKED_SHAREDCACHE;
- goto trans_begun;
+ if( pBlock ){
+ sqlite3ConnectionBlocked(p->db, pBlock);
+ rc = SQLITE_LOCKED_SHAREDCACHE;
+ goto trans_begun;
+ }
}
#endif
}
}while( (rc&0xFF)==SQLITE_BUSY && pBt->inTransaction==TRANS_NONE &&
btreeInvokeBusyHandler(pBt) );
+ sqlite3PagerResetLockTimeout(pBt->pPager);
if( rc==SQLITE_OK ){
if( p->inTrans==TRANS_NONE ){
int nCell; /* Number of cells in page pPage */
int rc; /* Return code */
BtShared *pBt = pPage->pBt;
- u8 isInitOrig = pPage->isInit;
Pgno pgno = pPage->pgno;
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
- rc = btreeInitPage(pPage);
- if( rc!=SQLITE_OK ){
- goto set_child_ptrmaps_out;
- }
+ rc = pPage->isInit ? SQLITE_OK : btreeInitPage(pPage);
+ if( rc!=SQLITE_OK ) return rc;
nCell = pPage->nCell;
for(i=0; i<nCell; i++){
ptrmapPut(pBt, childPgno, PTRMAP_BTREE, pgno, &rc);
}
-set_child_ptrmaps_out:
- pPage->isInit = isInitOrig;
return rc;
}
if( eType==PTRMAP_OVERFLOW2 ){
/* The pointer is always the first 4 bytes of the page in this case. */
if( get4byte(pPage->aData)!=iFrom ){
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
put4byte(pPage->aData, iTo);
}else{
- u8 isInitOrig = pPage->isInit;
int i;
int nCell;
int rc;
- rc = btreeInitPage(pPage);
+ rc = pPage->isInit ? SQLITE_OK : btreeInitPage(pPage);
if( rc ) return rc;
nCell = pPage->nCell;
if( eType==PTRMAP_OVERFLOW1 ){
CellInfo info;
pPage->xParseCell(pPage, pCell, &info);
- if( info.iOverflow
- && pCell+info.iOverflow+3<=pPage->aData+pPage->maskPage
- && iFrom==get4byte(&pCell[info.iOverflow])
- ){
- put4byte(&pCell[info.iOverflow], iTo);
- break;
+ if( info.nLocal<info.nPayload ){
+ if( pCell+info.nSize > pPage->aData+pPage->pBt->usableSize ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
+ if( iFrom==get4byte(pCell+info.nSize-4) ){
+ put4byte(pCell+info.nSize-4, iTo);
+ break;
+ }
}
}else{
if( get4byte(pCell)==iFrom ){
if( i==nCell ){
if( eType!=PTRMAP_BTREE ||
get4byte(&pPage->aData[pPage->hdrOffset+8])!=iFrom ){
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pPage);
}
put4byte(&pPage->aData[pPage->hdrOffset+8], iTo);
}
-
- pPage->isInit = isInitOrig;
}
return SQLITE_OK;
}
if( pBtree ){
sqlite3BtreeEnter(pBtree);
for(p=pBtree->pBt->pCursor; p; p=p->pNext){
- int i;
if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){
if( p->eState==CURSOR_VALID || p->eState==CURSOR_SKIPNEXT ){
rc = saveCursorPosition(p);
p->eState = CURSOR_FAULT;
p->skipNext = errCode;
}
- for(i=0; i<=p->iPage; i++){
- releasePage(p->apPage[i]);
- p->apPage[i] = 0;
- }
+ btreeReleaseAllCursorPages(p);
}
sqlite3BtreeLeave(pBtree);
}
if( nPage==0 ) sqlite3PagerPagecount(pBt->pPager, &nPage);
testcase( pBt->nPage!=nPage );
pBt->nPage = nPage;
- releasePage(pPage1);
+ releasePageOne(pPage1);
}
assert( countValidCursors(pBt, 1)==0 );
pBt->inTransaction = TRANS_READ;
assert( op==SAVEPOINT_RELEASE || op==SAVEPOINT_ROLLBACK );
assert( iSavepoint>=0 || (iSavepoint==-1 && op==SAVEPOINT_ROLLBACK) );
sqlite3BtreeEnter(p);
- rc = sqlite3PagerSavepoint(pBt->pPager, op, iSavepoint);
+ if( op==SAVEPOINT_ROLLBACK ){
+ rc = saveAllCursors(pBt, 0, 0);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3PagerSavepoint(pBt->pPager, op, iSavepoint);
+ }
if( rc==SQLITE_OK ){
if( iSavepoint<0 && (pBt->btsFlags & BTS_INITIALLY_EMPTY)!=0 ){
pBt->nPage = 0;
** on the database already. If a write-cursor is requested, then
** the caller is assumed to have an open write transaction.
**
-** If wrFlag==0, then the cursor can only be used for reading.
-** If wrFlag==1, then the cursor can be used for reading or for
-** writing if other conditions for writing are also met. These
-** are the conditions that must be met in order for writing to
-** be allowed:
+** If the BTREE_WRCSR bit of wrFlag is clear, then the cursor can only
+** be used for reading. If the BTREE_WRCSR bit is set, then the cursor
+** can be used for reading or for writing if other conditions for writing
+** are also met. These are the conditions that must be met in order
+** for writing to be allowed:
**
-** 1: The cursor must have been opened with wrFlag==1
+** 1: The cursor must have been opened with wrFlag containing BTREE_WRCSR
**
** 2: Other database connections that share the same pager cache
** but which are not in the READ_UNCOMMITTED state may not have
**
** 4: There must be an active transaction.
**
+** The BTREE_FORDELETE bit of wrFlag may optionally be set if BTREE_WRCSR
+** is set. If FORDELETE is set, that is a hint to the implementation that
+** this cursor will only be used to seek to and delete entries of an index
+** as part of a larger DELETE statement. The FORDELETE hint is not used by
+** this implementation. But in a hypothetical alternative storage engine
+** in which index entries are automatically deleted when corresponding table
+** rows are deleted, the FORDELETE flag is a hint that all SEEK and DELETE
+** operations on this cursor can be no-ops and all READ operations can
+** return a null row (2-bytes: 0x01 0x00).
+**
** No checking is done to make sure that page iTable really is the
** root page of a b-tree. If it is not, then the cursor acquired
** will not work correctly.
BtCursor *pX; /* Looping over other all cursors */
assert( sqlite3BtreeHoldsMutex(p) );
- assert( wrFlag==0 || wrFlag==1 );
+ assert( wrFlag==0
+ || wrFlag==BTREE_WRCSR
+ || wrFlag==(BTREE_WRCSR|BTREE_FORDELETE)
+ );
/* The following assert statements verify that if this is a sharable
** b-tree database, the connection is holding the required table locks,
** and that no other connection has any open cursor that conflicts with
** this lock. */
- assert( hasSharedCacheTableLock(p, iTable, pKeyInfo!=0, wrFlag+1) );
+ assert( hasSharedCacheTableLock(p, iTable, pKeyInfo!=0, (wrFlag?2:1)) );
assert( wrFlag==0 || !hasReadConflicts(p, iTable) );
/* Assert that the caller has opened the required transaction. */
if( wrFlag ){
allocateTempSpace(pBt);
- if( pBt->pTmpSpace==0 ) return SQLITE_NOMEM;
+ if( pBt->pTmpSpace==0 ) return SQLITE_NOMEM_BKPT;
}
if( iTable==1 && btreePagecount(pBt)==0 ){
assert( wrFlag==0 );
pCur->pKeyInfo = pKeyInfo;
pCur->pBtree = p;
pCur->pBt = pBt;
- assert( wrFlag==0 || wrFlag==BTCF_WriteFlag );
- pCur->curFlags = wrFlag;
+ pCur->curFlags = wrFlag ? BTCF_WriteFlag : 0;
pCur->curPagerFlags = wrFlag ? 0 : PAGER_GET_READONLY;
/* If there are two or more cursors on the same btree, then all such
** cursors *must* have the BTCF_Multiple flag set. */
** of run-time by skipping the initialization of those elements.
*/
SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor *p){
- memset(p, 0, offsetof(BtCursor, iPage));
+ memset(p, 0, offsetof(BtCursor, BTCURSOR_FIRST_UNINIT));
}
/*
SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){
Btree *pBtree = pCur->pBtree;
if( pBtree ){
- int i;
BtShared *pBt = pCur->pBt;
sqlite3BtreeEnter(pBtree);
- sqlite3BtreeClearCursor(pCur);
assert( pBt->pCursor!=0 );
if( pBt->pCursor==pCur ){
pBt->pCursor = pCur->pNext;
pPrev = pPrev->pNext;
}while( ALWAYS(pPrev) );
}
- for(i=0; i<=pCur->iPage; i++){
- releasePage(pCur->apPage[i]);
- }
+ btreeReleaseAllCursorPages(pCur);
unlockBtreeIfUnused(pBt);
sqlite3_free(pCur->aOverflow);
- /* sqlite3_free(pCur); */
+ sqlite3_free(pCur->pKey);
sqlite3BtreeLeave(pBtree);
}
return SQLITE_OK;
** Using this cache reduces the number of calls to btreeParseCell().
*/
#ifndef NDEBUG
+ static int cellInfoEqual(CellInfo *a, CellInfo *b){
+ if( a->nKey!=b->nKey ) return 0;
+ if( a->pPayload!=b->pPayload ) return 0;
+ if( a->nPayload!=b->nPayload ) return 0;
+ if( a->nLocal!=b->nLocal ) return 0;
+ if( a->nSize!=b->nSize ) return 0;
+ return 1;
+ }
static void assertCellInfo(BtCursor *pCur){
CellInfo info;
- int iPage = pCur->iPage;
memset(&info, 0, sizeof(info));
- btreeParseCell(pCur->apPage[iPage], pCur->aiIdx[iPage], &info);
- assert( CORRUPT_DB || memcmp(&info, &pCur->info, sizeof(info))==0 );
+ btreeParseCell(pCur->pPage, pCur->ix, &info);
+ assert( CORRUPT_DB || cellInfoEqual(&info, &pCur->info) );
}
#else
#define assertCellInfo(x)
#endif
static SQLITE_NOINLINE void getCellInfo(BtCursor *pCur){
if( pCur->info.nSize==0 ){
- int iPage = pCur->iPage;
pCur->curFlags |= BTCF_ValidNKey;
- btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info);
+ btreeParseCell(pCur->pPage,pCur->ix,&pCur->info);
}else{
assertCellInfo(pCur);
}
return pCur && pCur->eState==CURSOR_VALID;
}
#endif /* NDEBUG */
+SQLITE_PRIVATE int sqlite3BtreeCursorIsValidNN(BtCursor *pCur){
+ assert( pCur!=0 );
+ return pCur->eState==CURSOR_VALID;
+}
/*
-** Set *pSize to the size of the buffer needed to hold the value of
-** the key for the current entry. If the cursor is not pointing
-** to a valid entry, *pSize is set to 0.
-**
-** For a table with the INTKEY flag set, this routine returns the key
-** itself, not the number of bytes in the key.
-**
-** The caller must position the cursor prior to invoking this routine.
-**
-** This routine cannot fail. It always returns SQLITE_OK.
+** Return the value of the integer key or "rowid" for a table btree.
+** This routine is only valid for a cursor that is pointing into a
+** ordinary table btree. If the cursor points to an index btree or
+** is invalid, the result of this routine is undefined.
*/
-SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor *pCur, i64 *pSize){
+SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor *pCur){
assert( cursorHoldsMutex(pCur) );
assert( pCur->eState==CURSOR_VALID );
+ assert( pCur->curIntKey );
getCellInfo(pCur);
- *pSize = pCur->info.nKey;
- return SQLITE_OK;
+ return pCur->info.nKey;
}
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
/*
-** Set *pSize to the number of bytes of data in the entry the
-** cursor currently points to.
+** Return the offset into the database file for the start of the
+** payload to which the cursor is pointing.
+*/
+SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor *pCur){
+ assert( cursorHoldsMutex(pCur) );
+ assert( pCur->eState==CURSOR_VALID );
+ getCellInfo(pCur);
+ return (i64)pCur->pBt->pageSize*((i64)pCur->pPage->pgno - 1) +
+ (i64)(pCur->info.pPayload - pCur->pPage->aData);
+}
+#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */
+
+/*
+** Return the number of bytes of payload for the entry that pCur is
+** currently pointing to. For table btrees, this will be the amount
+** of data. For index btrees, this will be the size of the key.
**
** The caller must guarantee that the cursor is pointing to a non-NULL
** valid entry. In other words, the calling procedure must guarantee
** that the cursor has Cursor.eState==CURSOR_VALID.
-**
-** Failure is not possible. This function always returns SQLITE_OK.
-** It might just as well be a procedure (returning void) but we continue
-** to return an integer result code for historical reasons.
*/
-SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor *pCur, u32 *pSize){
+SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor *pCur){
assert( cursorHoldsMutex(pCur) );
assert( pCur->eState==CURSOR_VALID );
- assert( pCur->iPage>=0 );
- assert( pCur->iPage<BTCURSOR_MAX_DEPTH );
- assert( pCur->apPage[pCur->iPage]->intKeyLeaf==1 );
getCellInfo(pCur);
- *pSize = pCur->info.nPayload;
- return SQLITE_OK;
+ return pCur->info.nPayload;
}
/*
**
** 0: The operation is a read. Populate the overflow cache.
** 1: The operation is a write. Populate the overflow cache.
-** 2: The operation is a read. Do not populate the overflow cache.
**
** A total of "amt" bytes are read or written beginning at "offset".
** Data is read to or from the buffer pBuf.
** The content being read or written might appear on the main page
** or be scattered out on multiple overflow pages.
**
-** If the current cursor entry uses one or more overflow pages and the
-** eOp argument is not 2, this function may allocate space for and lazily
-** populates the overflow page-list cache array (BtCursor.aOverflow).
+** If the current cursor entry uses one or more overflow pages
+** this function may allocate space for and lazily populate
+** the overflow page-list cache array (BtCursor.aOverflow).
** Subsequent calls use this cache to make seeking to the supplied offset
** more efficient.
**
-** Once an overflow page-list cache has been allocated, it may be
+** Once an overflow page-list cache has been allocated, it must be
** invalidated if some other cursor writes to the same table, or if
** the cursor is moved to a different row. Additionally, in auto-vacuum
** mode, the following events may invalidate an overflow page-list cache.
unsigned char *aPayload;
int rc = SQLITE_OK;
int iIdx = 0;
- MemPage *pPage = pCur->apPage[pCur->iPage]; /* Btree page of current entry */
+ MemPage *pPage = pCur->pPage; /* Btree page of current entry */
BtShared *pBt = pCur->pBt; /* Btree this cursor belongs to */
#ifdef SQLITE_DIRECT_OVERFLOW_READ
- unsigned char * const pBufStart = pBuf;
- int bEnd; /* True if reading to end of data */
+ unsigned char * const pBufStart = pBuf; /* Start of original out buffer */
#endif
assert( pPage );
+ assert( eOp==0 || eOp==1 );
assert( pCur->eState==CURSOR_VALID );
- assert( pCur->aiIdx[pCur->iPage]<pPage->nCell );
+ assert( pCur->ix<pPage->nCell );
assert( cursorHoldsMutex(pCur) );
- assert( eOp!=2 || offset==0 ); /* Always start from beginning for eOp==2 */
getCellInfo(pCur);
aPayload = pCur->info.pPayload;
-#ifdef SQLITE_DIRECT_OVERFLOW_READ
- bEnd = offset+amt==pCur->info.nPayload;
-#endif
assert( offset+amt <= pCur->info.nPayload );
- if( &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize] ){
- /* Trying to read or write past the end of the data is an error */
- return SQLITE_CORRUPT_BKPT;
+ assert( aPayload > pPage->aData );
+ if( (uptr)(aPayload - pPage->aData) > (pBt->usableSize - pCur->info.nLocal) ){
+ /* Trying to read or write past the end of the data is an error. The
+ ** conditional above is really:
+ ** &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize]
+ ** but is recast into its current form to avoid integer overflow problems
+ */
+ return SQLITE_CORRUPT_PAGE(pPage);
}
/* Check if data must be read/written to/from the btree page itself. */
if( a+offset>pCur->info.nLocal ){
a = pCur->info.nLocal - offset;
}
- rc = copyPayload(&aPayload[offset], pBuf, a, (eOp & 0x01), pPage->pDbPage);
+ rc = copyPayload(&aPayload[offset], pBuf, a, eOp, pPage->pDbPage);
offset = 0;
pBuf += a;
amt -= a;
nextPage = get4byte(&aPayload[pCur->info.nLocal]);
/* If the BtCursor.aOverflow[] has not been allocated, allocate it now.
- ** Except, do not allocate aOverflow[] for eOp==2.
**
** The aOverflow[] array is sized at one entry for each overflow page
** in the overflow chain. The page number of the first overflow page is
** stored in aOverflow[0], etc. A value of 0 in the aOverflow[] array
** means "not yet known" (the cache is lazily populated).
*/
- if( eOp!=2 && (pCur->curFlags & BTCF_ValidOvfl)==0 ){
+ if( (pCur->curFlags & BTCF_ValidOvfl)==0 ){
int nOvfl = (pCur->info.nPayload-pCur->info.nLocal+ovflSize-1)/ovflSize;
- if( nOvfl>pCur->nOvflAlloc ){
+ if( pCur->aOverflow==0
+ || nOvfl*(int)sizeof(Pgno) > sqlite3MallocSize(pCur->aOverflow)
+ ){
Pgno *aNew = (Pgno*)sqlite3Realloc(
pCur->aOverflow, nOvfl*2*sizeof(Pgno)
);
if( aNew==0 ){
- rc = SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}else{
- pCur->nOvflAlloc = nOvfl*2;
pCur->aOverflow = aNew;
}
}
- if( rc==SQLITE_OK ){
- memset(pCur->aOverflow, 0, nOvfl*sizeof(Pgno));
- pCur->curFlags |= BTCF_ValidOvfl;
+ memset(pCur->aOverflow, 0, nOvfl*sizeof(Pgno));
+ pCur->curFlags |= BTCF_ValidOvfl;
+ }else{
+ /* If the overflow page-list cache has been allocated and the
+ ** entry for the first required overflow page is valid, skip
+ ** directly to it.
+ */
+ if( pCur->aOverflow[offset/ovflSize] ){
+ iIdx = (offset/ovflSize);
+ nextPage = pCur->aOverflow[iIdx];
+ offset = (offset%ovflSize);
}
}
- /* If the overflow page-list cache has been allocated and the
- ** entry for the first required overflow page is valid, skip
- ** directly to it.
- */
- if( (pCur->curFlags & BTCF_ValidOvfl)!=0
- && pCur->aOverflow[offset/ovflSize]
- ){
- iIdx = (offset/ovflSize);
- nextPage = pCur->aOverflow[iIdx];
- offset = (offset%ovflSize);
- }
-
- for( ; rc==SQLITE_OK && amt>0 && nextPage; iIdx++){
-
+ assert( rc==SQLITE_OK && amt>0 );
+ while( nextPage ){
/* If required, populate the overflow page-list cache. */
- if( (pCur->curFlags & BTCF_ValidOvfl)!=0 ){
- assert(!pCur->aOverflow[iIdx] || pCur->aOverflow[iIdx]==nextPage);
- pCur->aOverflow[iIdx] = nextPage;
- }
+ assert( pCur->aOverflow[iIdx]==0
+ || pCur->aOverflow[iIdx]==nextPage
+ || CORRUPT_DB );
+ pCur->aOverflow[iIdx] = nextPage;
if( offset>=ovflSize ){
/* The only reason to read this page is to obtain the page
** data is not required. So first try to lookup the overflow
** page-list cache, if any, then fall back to the getOverflowPage()
** function.
- **
- ** Note that the aOverflow[] array must be allocated because eOp!=2
- ** here. If eOp==2, then offset==0 and this branch is never taken.
*/
- assert( eOp!=2 );
assert( pCur->curFlags & BTCF_ValidOvfl );
assert( pCur->pBtree->db==pBt->db );
if( pCur->aOverflow[iIdx+1] ){
** range of data that is being read (eOp==0) or written (eOp!=0).
*/
#ifdef SQLITE_DIRECT_OVERFLOW_READ
- sqlite3_file *fd;
+ sqlite3_file *fd; /* File from which to do direct overflow read */
#endif
int a = amt;
if( a + offset > ovflSize ){
**
** 1) this is a read operation, and
** 2) data is required from the start of this overflow page, and
- ** 3) the database is file-backed, and
- ** 4) there is no open write-transaction, and
- ** 5) the database is not a WAL database,
- ** 6) all data from the page is being read.
- ** 7) at least 4 bytes have already been read into the output buffer
+ ** 3) there is no open write-transaction, and
+ ** 4) the database is file-backed, and
+ ** 5) the page is not in the WAL file
+ ** 6) at least 4 bytes have already been read into the output buffer
**
** then data can be read directly from the database file into the
** output buffer, bypassing the page-cache altogether. This speeds
** up loading large records that span many overflow pages.
*/
- if( (eOp&0x01)==0 /* (1) */
+ if( eOp==0 /* (1) */
&& offset==0 /* (2) */
- && (bEnd || a==ovflSize) /* (6) */
- && pBt->inTransaction==TRANS_READ /* (4) */
- && (fd = sqlite3PagerFile(pBt->pPager))->pMethods /* (3) */
- && pBt->pPage1->aData[19]==0x01 /* (5) */
- && &pBuf[-4]>=pBufStart /* (7) */
+ && pBt->inTransaction==TRANS_READ /* (3) */
+ && (fd = sqlite3PagerFile(pBt->pPager))->pMethods /* (4) */
+ && 0==sqlite3PagerUseWal(pBt->pPager, nextPage) /* (5) */
+ && &pBuf[-4]>=pBufStart /* (6) */
){
u8 aSave[4];
u8 *aWrite = &pBuf[-4];
- assert( aWrite>=pBufStart ); /* hence (7) */
+ assert( aWrite>=pBufStart ); /* due to (6) */
memcpy(aSave, aWrite, 4);
rc = sqlite3OsRead(fd, aWrite, a+4, (i64)pBt->pageSize*(nextPage-1));
nextPage = get4byte(aWrite);
{
DbPage *pDbPage;
- rc = sqlite3PagerAcquire(pBt->pPager, nextPage, &pDbPage,
- ((eOp&0x01)==0 ? PAGER_GET_READONLY : 0)
+ rc = sqlite3PagerGet(pBt->pPager, nextPage, &pDbPage,
+ (eOp==0 ? PAGER_GET_READONLY : 0)
);
if( rc==SQLITE_OK ){
aPayload = sqlite3PagerGetData(pDbPage);
nextPage = get4byte(aPayload);
- rc = copyPayload(&aPayload[offset+4], pBuf, a, (eOp&0x01), pDbPage);
+ rc = copyPayload(&aPayload[offset+4], pBuf, a, eOp, pDbPage);
sqlite3PagerUnref(pDbPage);
offset = 0;
}
}
amt -= a;
+ if( amt==0 ) return rc;
pBuf += a;
}
+ if( rc ) break;
+ iIdx++;
}
}
if( rc==SQLITE_OK && amt>0 ){
- return SQLITE_CORRUPT_BKPT;
+ /* Overflow chain ends prematurely */
+ return SQLITE_CORRUPT_PAGE(pPage);
}
return rc;
}
/*
-** Read part of the key associated with cursor pCur. Exactly
-** "amt" bytes will be transferred into pBuf[]. The transfer
+** Read part of the payload for the row at which that cursor pCur is currently
+** pointing. "amt" bytes will be transferred into pBuf[]. The transfer
** begins at "offset".
**
-** The caller must ensure that pCur is pointing to a valid row
-** in the table.
+** pCur can be pointing to either a table or an index b-tree.
+** If pointing to a table btree, then the content section is read. If
+** pCur is pointing to an index b-tree then the key section is read.
+**
+** For sqlite3BtreePayload(), the caller must ensure that pCur is pointing
+** to a valid row in the table. For sqlite3BtreePayloadChecked(), the
+** cursor might be invalid or might need to be restored before being read.
**
** Return SQLITE_OK on success or an error code if anything goes
** wrong. An error is returned if "offset+amt" is larger than
** the available payload.
*/
-SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){
+SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){
assert( cursorHoldsMutex(pCur) );
assert( pCur->eState==CURSOR_VALID );
- assert( pCur->iPage>=0 && pCur->apPage[pCur->iPage] );
- assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
+ assert( pCur->iPage>=0 && pCur->pPage );
+ assert( pCur->ix<pCur->pPage->nCell );
return accessPayload(pCur, offset, amt, (unsigned char*)pBuf, 0);
}
/*
-** Read part of the data associated with cursor pCur. Exactly
-** "amt" bytes will be transfered into pBuf[]. The transfer
-** begins at "offset".
-**
-** Return SQLITE_OK on success or an error code if anything goes
-** wrong. An error is returned if "offset+amt" is larger than
-** the available payload.
+** This variant of sqlite3BtreePayload() works even if the cursor has not
+** in the CURSOR_VALID state. It is only used by the sqlite3_blob_read()
+** interface.
*/
-SQLITE_PRIVATE int sqlite3BtreeData(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){
- int rc;
-
#ifndef SQLITE_OMIT_INCRBLOB
+static SQLITE_NOINLINE int accessPayloadChecked(
+ BtCursor *pCur,
+ u32 offset,
+ u32 amt,
+ void *pBuf
+){
+ int rc;
if ( pCur->eState==CURSOR_INVALID ){
return SQLITE_ABORT;
}
-#endif
-
- assert( cursorHoldsMutex(pCur) );
- rc = restoreCursorPosition(pCur);
- if( rc==SQLITE_OK ){
- assert( pCur->eState==CURSOR_VALID );
- assert( pCur->iPage>=0 && pCur->apPage[pCur->iPage] );
- assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
- rc = accessPayload(pCur, offset, amt, pBuf, 0);
+ assert( cursorOwnsBtShared(pCur) );
+ rc = btreeRestoreCursorPosition(pCur);
+ return rc ? rc : accessPayload(pCur, offset, amt, pBuf, 0);
+}
+SQLITE_PRIVATE int sqlite3BtreePayloadChecked(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){
+ if( pCur->eState==CURSOR_VALID ){
+ assert( cursorOwnsBtShared(pCur) );
+ return accessPayload(pCur, offset, amt, pBuf, 0);
+ }else{
+ return accessPayloadChecked(pCur, offset, amt, pBuf);
}
- return rc;
}
+#endif /* SQLITE_OMIT_INCRBLOB */
/*
** Return a pointer to payload information from the entry that the
BtCursor *pCur, /* Cursor pointing to entry to read from */
u32 *pAmt /* Write the number of available bytes here */
){
- u32 amt;
- assert( pCur!=0 && pCur->iPage>=0 && pCur->apPage[pCur->iPage]);
+ int amt;
+ assert( pCur!=0 && pCur->iPage>=0 && pCur->pPage);
assert( pCur->eState==CURSOR_VALID );
assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
- assert( cursorHoldsMutex(pCur) );
- assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
+ assert( cursorOwnsBtShared(pCur) );
+ assert( pCur->ix<pCur->pPage->nCell );
assert( pCur->info.nSize>0 );
- assert( pCur->info.pPayload>pCur->apPage[pCur->iPage]->aData || CORRUPT_DB );
- assert( pCur->info.pPayload<pCur->apPage[pCur->iPage]->aDataEnd ||CORRUPT_DB);
- amt = (int)(pCur->apPage[pCur->iPage]->aDataEnd - pCur->info.pPayload);
- if( pCur->info.nLocal<amt ) amt = pCur->info.nLocal;
- *pAmt = amt;
+ assert( pCur->info.pPayload>pCur->pPage->aData || CORRUPT_DB );
+ assert( pCur->info.pPayload<pCur->pPage->aDataEnd ||CORRUPT_DB);
+ amt = pCur->info.nLocal;
+ if( amt>(int)(pCur->pPage->aDataEnd - pCur->info.pPayload) ){
+ /* There is too little space on the page for the expected amount
+ ** of local content. Database must be corrupt. */
+ assert( CORRUPT_DB );
+ amt = MAX(0, (int)(pCur->pPage->aDataEnd - pCur->info.pPayload));
+ }
+ *pAmt = (u32)amt;
return (void*)pCur->info.pPayload;
}
** These routines is used to get quick access to key and data
** in the common case where no overflow pages are used.
*/
-SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor *pCur, u32 *pAmt){
- return fetchPayload(pCur, pAmt);
-}
-SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor *pCur, u32 *pAmt){
+SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor *pCur, u32 *pAmt){
return fetchPayload(pCur, pAmt);
}
static int moveToChild(BtCursor *pCur, u32 newPgno){
BtShared *pBt = pCur->pBt;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->eState==CURSOR_VALID );
assert( pCur->iPage<BTCURSOR_MAX_DEPTH );
assert( pCur->iPage>=0 );
}
pCur->info.nSize = 0;
pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
+ pCur->aiIdx[pCur->iPage] = pCur->ix;
+ pCur->apPage[pCur->iPage] = pCur->pPage;
+ pCur->ix = 0;
pCur->iPage++;
- pCur->aiIdx[pCur->iPage] = 0;
- return getAndInitPage(pBt, newPgno, &pCur->apPage[pCur->iPage],
- pCur, pCur->curPagerFlags);
+ return getAndInitPage(pBt, newPgno, &pCur->pPage, pCur, pCur->curPagerFlags);
}
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
/*
** Page pParent is an internal (non-leaf) tree page. This function
** asserts that page number iChild is the left-child if the iIdx'th
** the largest cell index.
*/
static void moveToParent(BtCursor *pCur){
- assert( cursorHoldsMutex(pCur) );
+ MemPage *pLeaf;
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->eState==CURSOR_VALID );
assert( pCur->iPage>0 );
- assert( pCur->apPage[pCur->iPage] );
+ assert( pCur->pPage );
assertParentIndex(
pCur->apPage[pCur->iPage-1],
pCur->aiIdx[pCur->iPage-1],
- pCur->apPage[pCur->iPage]->pgno
+ pCur->pPage->pgno
);
testcase( pCur->aiIdx[pCur->iPage-1] > pCur->apPage[pCur->iPage-1]->nCell );
pCur->info.nSize = 0;
pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
- releasePageNotNull(pCur->apPage[pCur->iPage--]);
+ pCur->ix = pCur->aiIdx[pCur->iPage-1];
+ pLeaf = pCur->pPage;
+ pCur->pPage = pCur->apPage[--pCur->iPage];
+ releasePageNotNull(pLeaf);
}
/*
** single child page. This can only happen with the table rooted at page 1.
**
** If the b-tree structure is empty, the cursor state is set to
-** CURSOR_INVALID. Otherwise, the cursor is set to point to the first
-** cell located on the root (or virtual root) page and the cursor state
-** is set to CURSOR_VALID.
+** CURSOR_INVALID and this routine returns SQLITE_EMPTY. Otherwise,
+** the cursor is set to point to the first cell located on the root
+** (or virtual root) page and the cursor state is set to CURSOR_VALID.
**
** If this function returns successfully, it may be assumed that the
** page-header flags indicate that the [virtual] root-page is the expected
MemPage *pRoot;
int rc = SQLITE_OK;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( CURSOR_INVALID < CURSOR_REQUIRESEEK );
assert( CURSOR_VALID < CURSOR_REQUIRESEEK );
assert( CURSOR_FAULT > CURSOR_REQUIRESEEK );
- if( pCur->eState>=CURSOR_REQUIRESEEK ){
- if( pCur->eState==CURSOR_FAULT ){
- assert( pCur->skipNext!=SQLITE_OK );
- return pCur->skipNext;
- }
- sqlite3BtreeClearCursor(pCur);
- }
+ assert( pCur->eState < CURSOR_REQUIRESEEK || pCur->iPage<0 );
+ assert( pCur->pgnoRoot>0 || pCur->iPage<0 );
if( pCur->iPage>=0 ){
- while( pCur->iPage ){
- assert( pCur->apPage[pCur->iPage]!=0 );
- releasePageNotNull(pCur->apPage[pCur->iPage--]);
+ if( pCur->iPage ){
+ releasePageNotNull(pCur->pPage);
+ while( --pCur->iPage ){
+ releasePageNotNull(pCur->apPage[pCur->iPage]);
+ }
+ pCur->pPage = pCur->apPage[0];
+ goto skip_init;
}
}else if( pCur->pgnoRoot==0 ){
pCur->eState = CURSOR_INVALID;
- return SQLITE_OK;
+ return SQLITE_EMPTY;
}else{
assert( pCur->iPage==(-1) );
- rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->apPage[0],
+ if( pCur->eState>=CURSOR_REQUIRESEEK ){
+ if( pCur->eState==CURSOR_FAULT ){
+ assert( pCur->skipNext!=SQLITE_OK );
+ return pCur->skipNext;
+ }
+ sqlite3BtreeClearCursor(pCur);
+ }
+ rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->pPage,
0, pCur->curPagerFlags);
if( rc!=SQLITE_OK ){
pCur->eState = CURSOR_INVALID;
return rc;
}
pCur->iPage = 0;
- pCur->curIntKey = pCur->apPage[0]->intKey;
+ pCur->curIntKey = pCur->pPage->intKey;
}
- pRoot = pCur->apPage[0];
+ pRoot = pCur->pPage;
assert( pRoot->pgno==pCur->pgnoRoot );
/* If pCur->pKeyInfo is not NULL, then the caller that opened this cursor
** (or the freelist). */
assert( pRoot->intKey==1 || pRoot->intKey==0 );
if( pRoot->isInit==0 || (pCur->pKeyInfo==0)!=pRoot->intKey ){
- return SQLITE_CORRUPT_BKPT;
+ return SQLITE_CORRUPT_PAGE(pCur->pPage);
}
- pCur->aiIdx[0] = 0;
+skip_init:
+ pCur->ix = 0;
pCur->info.nSize = 0;
pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl);
+ pRoot = pCur->pPage;
if( pRoot->nCell>0 ){
pCur->eState = CURSOR_VALID;
}else if( !pRoot->leaf ){
rc = moveToChild(pCur, subpage);
}else{
pCur->eState = CURSOR_INVALID;
+ rc = SQLITE_EMPTY;
}
return rc;
}
int rc = SQLITE_OK;
MemPage *pPage;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->eState==CURSOR_VALID );
- while( rc==SQLITE_OK && !(pPage = pCur->apPage[pCur->iPage])->leaf ){
- assert( pCur->aiIdx[pCur->iPage]<pPage->nCell );
- pgno = get4byte(findCell(pPage, pCur->aiIdx[pCur->iPage]));
+ while( rc==SQLITE_OK && !(pPage = pCur->pPage)->leaf ){
+ assert( pCur->ix<pPage->nCell );
+ pgno = get4byte(findCell(pPage, pCur->ix));
rc = moveToChild(pCur, pgno);
}
return rc;
int rc = SQLITE_OK;
MemPage *pPage = 0;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->eState==CURSOR_VALID );
- while( !(pPage = pCur->apPage[pCur->iPage])->leaf ){
+ while( !(pPage = pCur->pPage)->leaf ){
pgno = get4byte(&pPage->aData[pPage->hdrOffset+8]);
- pCur->aiIdx[pCur->iPage] = pPage->nCell;
+ pCur->ix = pPage->nCell;
rc = moveToChild(pCur, pgno);
if( rc ) return rc;
}
- pCur->aiIdx[pCur->iPage] = pPage->nCell-1;
+ pCur->ix = pPage->nCell-1;
assert( pCur->info.nSize==0 );
assert( (pCur->curFlags & BTCF_ValidNKey)==0 );
return SQLITE_OK;
SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor *pCur, int *pRes){
int rc;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
rc = moveToRoot(pCur);
if( rc==SQLITE_OK ){
- if( pCur->eState==CURSOR_INVALID ){
- assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 );
- *pRes = 1;
- }else{
- assert( pCur->apPage[pCur->iPage]->nCell>0 );
- *pRes = 0;
- rc = moveToLeftmost(pCur);
- }
+ assert( pCur->pPage->nCell>0 );
+ *pRes = 0;
+ rc = moveToLeftmost(pCur);
+ }else if( rc==SQLITE_EMPTY ){
+ assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 );
+ *pRes = 1;
+ rc = SQLITE_OK;
}
return rc;
}
SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor *pCur, int *pRes){
int rc;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
/* If the cursor already points to the last entry, this is a no-op. */
for(ii=0; ii<pCur->iPage; ii++){
assert( pCur->aiIdx[ii]==pCur->apPage[ii]->nCell );
}
- assert( pCur->aiIdx[pCur->iPage]==pCur->apPage[pCur->iPage]->nCell-1 );
- assert( pCur->apPage[pCur->iPage]->leaf );
+ assert( pCur->ix==pCur->pPage->nCell-1 );
+ assert( pCur->pPage->leaf );
#endif
return SQLITE_OK;
}
rc = moveToRoot(pCur);
if( rc==SQLITE_OK ){
- if( CURSOR_INVALID==pCur->eState ){
- assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 );
- *pRes = 1;
+ assert( pCur->eState==CURSOR_VALID );
+ *pRes = 0;
+ rc = moveToRightmost(pCur);
+ if( rc==SQLITE_OK ){
+ pCur->curFlags |= BTCF_AtLast;
}else{
- assert( pCur->eState==CURSOR_VALID );
- *pRes = 0;
- rc = moveToRightmost(pCur);
- if( rc==SQLITE_OK ){
- pCur->curFlags |= BTCF_AtLast;
- }else{
- pCur->curFlags &= ~BTCF_AtLast;
- }
-
+ pCur->curFlags &= ~BTCF_AtLast;
}
+ }else if( rc==SQLITE_EMPTY ){
+ assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 );
+ *pRes = 1;
+ rc = SQLITE_OK;
}
return rc;
}
** *pRes>0 The cursor is left pointing at an entry that
** is larger than intKey/pIdxKey.
**
+** For index tables, the pIdxKey->eqSeen field is set to 1 if there
+** exists an entry in the table that exactly matches pIdxKey.
*/
SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
BtCursor *pCur, /* The cursor to be moved */
int rc;
RecordCompare xRecordCompare;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
assert( pRes );
assert( (pIdxKey==0)==(pCur->pKeyInfo==0) );
+ assert( pCur->eState!=CURSOR_VALID || (pIdxKey==0)==(pCur->curIntKey!=0) );
/* If the cursor is already positioned at the point we are trying
** to move to, then just return without doing any work */
- if( pCur->eState==CURSOR_VALID && (pCur->curFlags & BTCF_ValidNKey)!=0
- && pCur->curIntKey
+ if( pIdxKey==0
+ && pCur->eState==CURSOR_VALID && (pCur->curFlags & BTCF_ValidNKey)!=0
){
if( pCur->info.nKey==intKey ){
*pRes = 0;
return SQLITE_OK;
}
- if( (pCur->curFlags & BTCF_AtLast)!=0 && pCur->info.nKey<intKey ){
- *pRes = -1;
- return SQLITE_OK;
+ if( pCur->info.nKey<intKey ){
+ if( (pCur->curFlags & BTCF_AtLast)!=0 ){
+ *pRes = -1;
+ return SQLITE_OK;
+ }
+ /* If the requested key is one more than the previous key, then
+ ** try to get there using sqlite3BtreeNext() rather than a full
+ ** binary search. This is an optimization only. The correct answer
+ ** is still obtained without this case, only a little more slowely */
+ if( pCur->info.nKey+1==intKey && !pCur->skipNext ){
+ *pRes = 0;
+ rc = sqlite3BtreeNext(pCur, 0);
+ if( rc==SQLITE_OK ){
+ getCellInfo(pCur);
+ if( pCur->info.nKey==intKey ){
+ return SQLITE_OK;
+ }
+ }else if( rc==SQLITE_DONE ){
+ rc = SQLITE_OK;
+ }else{
+ return rc;
+ }
+ }
}
}
rc = moveToRoot(pCur);
if( rc ){
+ if( rc==SQLITE_EMPTY ){
+ assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 );
+ *pRes = -1;
+ return SQLITE_OK;
+ }
return rc;
}
- assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage] );
- assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->isInit );
- assert( pCur->eState==CURSOR_INVALID || pCur->apPage[pCur->iPage]->nCell>0 );
- if( pCur->eState==CURSOR_INVALID ){
- *pRes = -1;
- assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 );
- return SQLITE_OK;
- }
- assert( pCur->apPage[0]->intKey==pCur->curIntKey );
+ assert( pCur->pPage );
+ assert( pCur->pPage->isInit );
+ assert( pCur->eState==CURSOR_VALID );
+ assert( pCur->pPage->nCell > 0 );
+ assert( pCur->iPage==0 || pCur->apPage[0]->intKey==pCur->curIntKey );
assert( pCur->curIntKey || pIdxKey );
for(;;){
int lwr, upr, idx, c;
Pgno chldPg;
- MemPage *pPage = pCur->apPage[pCur->iPage];
+ MemPage *pPage = pCur->pPage;
u8 *pCell; /* Pointer to current cell in pPage */
/* pPage->nCell must be greater than zero. If this is the root-page
upr = pPage->nCell-1;
assert( biasRight==0 || biasRight==1 );
idx = upr>>(1-biasRight); /* idx = biasRight ? upr : (lwr+upr)/2; */
- pCur->aiIdx[pCur->iPage] = (u16)idx;
+ pCur->ix = (u16)idx;
if( xRecordCompare==0 ){
for(;;){
i64 nCellKey;
pCell = findCellPastPtr(pPage, idx);
if( pPage->intKeyLeaf ){
while( 0x80 <= *(pCell++) ){
- if( pCell>=pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT;
+ if( pCell>=pPage->aDataEnd ){
+ return SQLITE_CORRUPT_PAGE(pPage);
+ }
}
}
getVarint(pCell, (u64*)&nCellKey);
if( lwr>upr ){ c = +1; break; }
}else{
assert( nCellKey==intKey );
- pCur->curFlags |= BTCF_ValidNKey;
- pCur->info.nKey = nCellKey;
- pCur->aiIdx[pCur->iPage] = (u16)idx;
+ pCur->ix = (u16)idx;
if( !pPage->leaf ){
lwr = idx;
goto moveto_next_layer;
}else{
+ pCur->curFlags |= BTCF_ValidNKey;
+ pCur->info.nKey = nCellKey;
+ pCur->info.nSize = 0;
*pRes = 0;
- rc = SQLITE_OK;
- goto moveto_finish;
+ return SQLITE_OK;
}
}
assert( lwr+upr>=0 );
testcase( nCell==1 ); /* Invalid key size: 0x80 0x80 0x01 */
testcase( nCell==2 ); /* Minimum legal index key size */
if( nCell<2 ){
- rc = SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_PAGE(pPage);
goto moveto_finish;
}
pCellKey = sqlite3Malloc( nCell+18 );
if( pCellKey==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto moveto_finish;
}
- pCur->aiIdx[pCur->iPage] = (u16)idx;
- rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 2);
+ pCur->ix = (u16)idx;
+ rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0);
+ pCur->curFlags &= ~BTCF_ValidOvfl;
if( rc ){
sqlite3_free(pCellKey);
goto moveto_finish;
assert( c==0 );
*pRes = 0;
rc = SQLITE_OK;
- pCur->aiIdx[pCur->iPage] = (u16)idx;
- if( pIdxKey->errCode ) rc = SQLITE_CORRUPT;
+ pCur->ix = (u16)idx;
+ if( pIdxKey->errCode ) rc = SQLITE_CORRUPT_BKPT;
goto moveto_finish;
}
if( lwr>upr ) break;
assert( lwr==upr+1 || (pPage->intKey && !pPage->leaf) );
assert( pPage->isInit );
if( pPage->leaf ){
- assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
- pCur->aiIdx[pCur->iPage] = (u16)idx;
+ assert( pCur->ix<pCur->pPage->nCell );
+ pCur->ix = (u16)idx;
*pRes = c;
rc = SQLITE_OK;
goto moveto_finish;
}else{
chldPg = get4byte(findCell(pPage, lwr));
}
- pCur->aiIdx[pCur->iPage] = (u16)lwr;
+ pCur->ix = (u16)lwr;
rc = moveToChild(pCur, chldPg);
if( rc ) break;
}
moveto_finish:
pCur->info.nSize = 0;
- pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
+ assert( (pCur->curFlags & BTCF_ValidOvfl)==0 );
return rc;
}
}
/*
-** Advance the cursor to the next entry in the database. If
-** successful then set *pRes=0. If the cursor
-** was already pointing to the last entry in the database before
-** this routine was called, then set *pRes=1.
+** Return an estimate for the number of rows in the table that pCur is
+** pointing to. Return a negative number if no estimate is currently
+** available.
+*/
+SQLITE_PRIVATE i64 sqlite3BtreeRowCountEst(BtCursor *pCur){
+ i64 n;
+ u8 i;
+
+ assert( cursorOwnsBtShared(pCur) );
+ assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) );
+
+ /* Currently this interface is only called by the OP_IfSmaller
+ ** opcode, and it that case the cursor will always be valid and
+ ** will always point to a leaf node. */
+ if( NEVER(pCur->eState!=CURSOR_VALID) ) return -1;
+ if( NEVER(pCur->pPage->leaf==0) ) return -1;
+
+ n = pCur->pPage->nCell;
+ for(i=0; i<pCur->iPage; i++){
+ n *= pCur->apPage[i]->nCell;
+ }
+ return n;
+}
+
+/*
+** Advance the cursor to the next entry in the database.
+** Return value:
+**
+** SQLITE_OK success
+** SQLITE_DONE cursor is already pointing at the last element
+** otherwise some kind of error occurred
**
** The main entry point is sqlite3BtreeNext(). That routine is optimized
** for the common case of merely incrementing the cell counter BtCursor.aiIdx
** routine is called when it is necessary to move to a different page or
** to restore the cursor.
**
-** The calling function will set *pRes to 0 or 1. The initial *pRes value
-** will be 1 if the cursor being stepped corresponds to an SQL index and
-** if this routine could have been skipped if that SQL index had been
-** a unique index. Otherwise the caller will have set *pRes to zero.
-** Zero is the common case. The btree implementation is free to use the
-** initial *pRes value as a hint to improve performance, but the current
-** SQLite btree implementation does not. (Note that the comdb2 btree
-** implementation does use this hint, however.)
+** If bit 0x01 of the F argument in sqlite3BtreeNext(C,F) is 1, then the
+** cursor corresponds to an SQL index and this routine could have been
+** skipped if the SQL index had been a unique index. The F argument
+** is a hint to the implement. SQLite btree implementation does not use
+** this hint, but COMDB2 does.
*/
-static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){
+static SQLITE_NOINLINE int btreeNext(BtCursor *pCur){
int rc;
int idx;
MemPage *pPage;
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
- assert( *pRes==0 );
if( pCur->eState!=CURSOR_VALID ){
assert( (pCur->curFlags & BTCF_ValidOvfl)==0 );
rc = restoreCursorPosition(pCur);
return rc;
}
if( CURSOR_INVALID==pCur->eState ){
- *pRes = 1;
- return SQLITE_OK;
+ return SQLITE_DONE;
}
if( pCur->skipNext ){
assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_SKIPNEXT );
}
}
- pPage = pCur->apPage[pCur->iPage];
- idx = ++pCur->aiIdx[pCur->iPage];
+ pPage = pCur->pPage;
+ idx = ++pCur->ix;
assert( pPage->isInit );
/* If the database file is corrupt, it is possible for the value of idx
}
do{
if( pCur->iPage==0 ){
- *pRes = 1;
pCur->eState = CURSOR_INVALID;
- return SQLITE_OK;
+ return SQLITE_DONE;
}
moveToParent(pCur);
- pPage = pCur->apPage[pCur->iPage];
- }while( pCur->aiIdx[pCur->iPage]>=pPage->nCell );
+ pPage = pCur->pPage;
+ }while( pCur->ix>=pPage->nCell );
if( pPage->intKey ){
- return sqlite3BtreeNext(pCur, pRes);
+ return sqlite3BtreeNext(pCur, 0);
}else{
return SQLITE_OK;
}
return moveToLeftmost(pCur);
}
}
-SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){
+SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int flags){
MemPage *pPage;
- assert( cursorHoldsMutex(pCur) );
- assert( pRes!=0 );
- assert( *pRes==0 || *pRes==1 );
+ UNUSED_PARAMETER( flags ); /* Used in COMDB2 but not native SQLite */
+ assert( cursorOwnsBtShared(pCur) );
+ assert( flags==0 || flags==1 );
assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
pCur->info.nSize = 0;
pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl);
- *pRes = 0;
- if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur, pRes);
- pPage = pCur->apPage[pCur->iPage];
- if( (++pCur->aiIdx[pCur->iPage])>=pPage->nCell ){
- pCur->aiIdx[pCur->iPage]--;
- return btreeNext(pCur, pRes);
+ if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur);
+ pPage = pCur->pPage;
+ if( (++pCur->ix)>=pPage->nCell ){
+ pCur->ix--;
+ return btreeNext(pCur);
}
if( pPage->leaf ){
return SQLITE_OK;
}
/*
-** Step the cursor to the back to the previous entry in the database. If
-** successful then set *pRes=0. If the cursor
-** was already pointing to the first entry in the database before
-** this routine was called, then set *pRes=1.
+** Step the cursor to the back to the previous entry in the database.
+** Return values:
+**
+** SQLITE_OK success
+** SQLITE_DONE the cursor is already on the first element of the table
+** otherwise some kind of error occurred
**
** The main entry point is sqlite3BtreePrevious(). That routine is optimized
** for the common case of merely decrementing the cell counter BtCursor.aiIdx
** helper routine is called when it is necessary to move to a different page
** or to restore the cursor.
**
-** The calling function will set *pRes to 0 or 1. The initial *pRes value
-** will be 1 if the cursor being stepped corresponds to an SQL index and
-** if this routine could have been skipped if that SQL index had been
-** a unique index. Otherwise the caller will have set *pRes to zero.
-** Zero is the common case. The btree implementation is free to use the
-** initial *pRes value as a hint to improve performance, but the current
-** SQLite btree implementation does not. (Note that the comdb2 btree
-** implementation does use this hint, however.)
+** If bit 0x01 of the F argument to sqlite3BtreePrevious(C,F) is 1, then
+** the cursor corresponds to an SQL index and this routine could have been
+** skipped if the SQL index had been a unique index. The F argument is a
+** hint to the implement. The native SQLite btree implementation does not
+** use this hint, but COMDB2 does.
*/
-static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur, int *pRes){
+static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur){
int rc;
MemPage *pPage;
- assert( cursorHoldsMutex(pCur) );
- assert( pRes!=0 );
- assert( *pRes==0 );
+ assert( cursorOwnsBtShared(pCur) );
assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
assert( (pCur->curFlags & (BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey))==0 );
assert( pCur->info.nSize==0 );
return rc;
}
if( CURSOR_INVALID==pCur->eState ){
- *pRes = 1;
- return SQLITE_OK;
+ return SQLITE_DONE;
}
if( pCur->skipNext ){
assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_SKIPNEXT );
}
}
- pPage = pCur->apPage[pCur->iPage];
+ pPage = pCur->pPage;
assert( pPage->isInit );
if( !pPage->leaf ){
- int idx = pCur->aiIdx[pCur->iPage];
+ int idx = pCur->ix;
rc = moveToChild(pCur, get4byte(findCell(pPage, idx)));
if( rc ) return rc;
rc = moveToRightmost(pCur);
}else{
- while( pCur->aiIdx[pCur->iPage]==0 ){
+ while( pCur->ix==0 ){
if( pCur->iPage==0 ){
pCur->eState = CURSOR_INVALID;
- *pRes = 1;
- return SQLITE_OK;
+ return SQLITE_DONE;
}
moveToParent(pCur);
}
assert( pCur->info.nSize==0 );
- assert( (pCur->curFlags & (BTCF_ValidNKey|BTCF_ValidOvfl))==0 );
+ assert( (pCur->curFlags & (BTCF_ValidOvfl))==0 );
- pCur->aiIdx[pCur->iPage]--;
- pPage = pCur->apPage[pCur->iPage];
+ pCur->ix--;
+ pPage = pCur->pPage;
if( pPage->intKey && !pPage->leaf ){
- rc = sqlite3BtreePrevious(pCur, pRes);
+ rc = sqlite3BtreePrevious(pCur, 0);
}else{
rc = SQLITE_OK;
}
}
return rc;
}
-SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){
- assert( cursorHoldsMutex(pCur) );
- assert( pRes!=0 );
- assert( *pRes==0 || *pRes==1 );
+SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int flags){
+ assert( cursorOwnsBtShared(pCur) );
+ assert( flags==0 || flags==1 );
assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID );
- *pRes = 0;
+ UNUSED_PARAMETER( flags ); /* Used in COMDB2 but not native SQLite */
pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey);
pCur->info.nSize = 0;
if( pCur->eState!=CURSOR_VALID
- || pCur->aiIdx[pCur->iPage]==0
- || pCur->apPage[pCur->iPage]->leaf==0
+ || pCur->ix==0
+ || pCur->pPage->leaf==0
){
- return btreePrevious(pCur, pRes);
+ return btreePrevious(pCur);
}
- pCur->aiIdx[pCur->iPage]--;
+ pCur->ix--;
return SQLITE_OK;
}
}
testcase( iTrunk==mxPage );
if( iTrunk>mxPage || nSearch++ > n ){
- rc = SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_PGNO(pPrevTrunk ? pPrevTrunk->pgno : 1);
}else{
rc = btreeGetUnusedPage(pBt, iTrunk, &pTrunk, 0);
}
TRACE(("ALLOCATE: %d trunk - %d free pages left\n", *pPgno, n-1));
}else if( k>(u32)(pBt->usableSize/4 - 2) ){
/* Value of k is out of range. Database corruption */
- rc = SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_PGNO(iTrunk);
goto end_allocate_page;
#ifndef SQLITE_OMIT_AUTOVACUUM
}else if( searchList
MemPage *pNewTrunk;
Pgno iNewTrunk = get4byte(&pTrunk->aData[8]);
if( iNewTrunk>mxPage ){
- rc = SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_PGNO(iTrunk);
goto end_allocate_page;
}
testcase( iNewTrunk==mxPage );
iPage = get4byte(&aData[8+closest*4]);
testcase( iPage==mxPage );
if( iPage>mxPage ){
- rc = SQLITE_CORRUPT_BKPT;
+ rc = SQLITE_CORRUPT_PGNO(iTrunk);
goto end_allocate_page;
}
testcase( iPage==mxPage );
}
/*
-** Free any overflow pages associated with the given Cell. Write the
-** local Cell size (the number of bytes on the original page, omitting
-** overflow) into *pnSize.
+** Free any overflow pages associated with the given Cell. Store
+** size information about the cell in pInfo.
*/
static int clearCell(
MemPage *pPage, /* The page that contains the Cell */
unsigned char *pCell, /* First byte of the Cell */
- u16 *pnSize /* Write the size of the Cell here */
+ CellInfo *pInfo /* Size information about the cell */
){
- BtShared *pBt = pPage->pBt;
- CellInfo info;
+ BtShared *pBt;
Pgno ovflPgno;
int rc;
int nOvfl;
u32 ovflPageSize;
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
- pPage->xParseCell(pPage, pCell, &info);
- *pnSize = info.nSize;
- if( info.iOverflow==0 ){
+ pPage->xParseCell(pPage, pCell, pInfo);
+ if( pInfo->nLocal==pInfo->nPayload ){
return SQLITE_OK; /* No overflow pages. Return without doing anything */
}
- if( pCell+info.iOverflow+3 > pPage->aData+pPage->maskPage ){
- return SQLITE_CORRUPT_BKPT; /* Cell extends past end of page */
+ if( pCell+pInfo->nSize-1 > pPage->aData+pPage->maskPage ){
+ /* Cell extends past end of page */
+ return SQLITE_CORRUPT_PAGE(pPage);
}
- ovflPgno = get4byte(&pCell[info.iOverflow]);
+ ovflPgno = get4byte(pCell + pInfo->nSize - 4);
+ pBt = pPage->pBt;
assert( pBt->usableSize > 4 );
ovflPageSize = pBt->usableSize - 4;
- nOvfl = (info.nPayload - info.nLocal + ovflPageSize - 1)/ovflPageSize;
+ nOvfl = (pInfo->nPayload - pInfo->nLocal + ovflPageSize - 1)/ovflPageSize;
assert( nOvfl>0 ||
- (CORRUPT_DB && (info.nPayload + ovflPageSize)<ovflPageSize)
+ (CORRUPT_DB && (pInfo->nPayload + ovflPageSize)<ovflPageSize)
);
while( nOvfl-- ){
Pgno iNext = 0;
static int fillInCell(
MemPage *pPage, /* The page that contains the cell */
unsigned char *pCell, /* Complete text of the cell */
- const void *pKey, i64 nKey, /* The key */
- const void *pData,int nData, /* The data */
- int nZero, /* Extra zero bytes to append to pData */
+ const BtreePayload *pX, /* Payload with which to construct the cell */
int *pnSize /* Write cell size here */
){
int nPayload;
const u8 *pSrc;
- int nSrc, n, rc;
+ int nSrc, n, rc, mn;
int spaceLeft;
- MemPage *pOvfl = 0;
- MemPage *pToRelease = 0;
+ MemPage *pToRelease;
unsigned char *pPrior;
unsigned char *pPayload;
- BtShared *pBt = pPage->pBt;
- Pgno pgnoOvfl = 0;
+ BtShared *pBt;
+ Pgno pgnoOvfl;
int nHeader;
assert( sqlite3_mutex_held(pPage->pBt->mutex) );
/* pPage is not necessarily writeable since pCell might be auxiliary
** buffer space that is separate from the pPage buffer area */
- assert( pCell<pPage->aData || pCell>=&pPage->aData[pBt->pageSize]
+ assert( pCell<pPage->aData || pCell>=&pPage->aData[pPage->pBt->pageSize]
|| sqlite3PagerIswriteable(pPage->pDbPage) );
/* Fill in the header. */
nHeader = pPage->childPtrSize;
- nPayload = nData + nZero;
- if( pPage->intKeyLeaf ){
+ if( pPage->intKey ){
+ nPayload = pX->nData + pX->nZero;
+ pSrc = pX->pData;
+ nSrc = pX->nData;
+ assert( pPage->intKeyLeaf ); /* fillInCell() only called for leaves */
nHeader += putVarint32(&pCell[nHeader], nPayload);
+ nHeader += putVarint(&pCell[nHeader], *(u64*)&pX->nKey);
}else{
- assert( nData==0 );
- assert( nZero==0 );
+ assert( pX->nKey<=0x7fffffff && pX->pKey!=0 );
+ nSrc = nPayload = (int)pX->nKey;
+ pSrc = pX->pKey;
+ nHeader += putVarint32(&pCell[nHeader], nPayload);
}
- nHeader += putVarint(&pCell[nHeader], *(u64*)&nKey);
- /* Fill in the payload size */
- if( pPage->intKey ){
- pSrc = pData;
- nSrc = nData;
- nData = 0;
- }else{
- assert( nKey<=0x7fffffff && pKey!=0 );
- nPayload = (int)nKey;
- pSrc = pKey;
- nSrc = (int)nKey;
- }
+ /* Fill in the payload */
+ pPayload = &pCell[nHeader];
if( nPayload<=pPage->maxLocal ){
+ /* This is the common case where everything fits on the btree page
+ ** and no overflow pages are required. */
n = nHeader + nPayload;
testcase( n==3 );
testcase( n==4 );
if( n<4 ) n = 4;
*pnSize = n;
- spaceLeft = nPayload;
- pPrior = pCell;
- }else{
- int mn = pPage->minLocal;
- n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4);
- testcase( n==pPage->maxLocal );
- testcase( n==pPage->maxLocal+1 );
- if( n > pPage->maxLocal ) n = mn;
- spaceLeft = n;
- *pnSize = n + nHeader + 4;
- pPrior = &pCell[nHeader+n];
+ assert( nSrc<=nPayload );
+ testcase( nSrc<nPayload );
+ memcpy(pPayload, pSrc, nSrc);
+ memset(pPayload+nSrc, 0, nPayload-nSrc);
+ return SQLITE_OK;
}
- pPayload = &pCell[nHeader];
+
+ /* If we reach this point, it means that some of the content will need
+ ** to spill onto overflow pages.
+ */
+ mn = pPage->minLocal;
+ n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4);
+ testcase( n==pPage->maxLocal );
+ testcase( n==pPage->maxLocal+1 );
+ if( n > pPage->maxLocal ) n = mn;
+ spaceLeft = n;
+ *pnSize = n + nHeader + 4;
+ pPrior = &pCell[nHeader+n];
+ pToRelease = 0;
+ pgnoOvfl = 0;
+ pBt = pPage->pBt;
/* At this point variables should be set as follows:
**
** Use a call to btreeParseCellPtr() to verify that the values above
** were computed correctly.
*/
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
{
CellInfo info;
pPage->xParseCell(pPage, pCell, &info);
- assert( nHeader=(int)(info.pPayload - pCell) );
- assert( info.nKey==nKey );
+ assert( nHeader==(int)(info.pPayload - pCell) );
+ assert( info.nKey==pX->nKey );
assert( *pnSize == info.nSize );
assert( spaceLeft == info.nLocal );
- assert( pPrior == &pCell[info.iOverflow] );
}
#endif
/* Write the payload into the local Cell and any extra into overflow pages */
- while( nPayload>0 ){
+ while( 1 ){
+ n = nPayload;
+ if( n>spaceLeft ) n = spaceLeft;
+
+ /* If pToRelease is not zero than pPayload points into the data area
+ ** of pToRelease. Make sure pToRelease is still writeable. */
+ assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) );
+
+ /* If pPayload is part of the data area of pPage, then make sure pPage
+ ** is still writeable */
+ assert( pPayload<pPage->aData || pPayload>=&pPage->aData[pBt->pageSize]
+ || sqlite3PagerIswriteable(pPage->pDbPage) );
+
+ if( nSrc>=n ){
+ memcpy(pPayload, pSrc, n);
+ }else if( nSrc>0 ){
+ n = nSrc;
+ memcpy(pPayload, pSrc, n);
+ }else{
+ memset(pPayload, 0, n);
+ }
+ nPayload -= n;
+ if( nPayload<=0 ) break;
+ pPayload += n;
+ pSrc += n;
+ nSrc -= n;
+ spaceLeft -= n;
if( spaceLeft==0 ){
+ MemPage *pOvfl = 0;
#ifndef SQLITE_OMIT_AUTOVACUUM
Pgno pgnoPtrmap = pgnoOvfl; /* Overflow page pointer-map entry page */
if( pBt->autoVacuum ){
pPayload = &pOvfl->aData[4];
spaceLeft = pBt->usableSize - 4;
}
- n = nPayload;
- if( n>spaceLeft ) n = spaceLeft;
-
- /* If pToRelease is not zero than pPayload points into the data area
- ** of pToRelease. Make sure pToRelease is still writeable. */
- assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) );
-
- /* If pPayload is part of the data area of pPage, then make sure pPage
- ** is still writeable */
- assert( pPayload<pPage->aData || pPayload>=&pPage->aData[pBt->pageSize]
- || sqlite3PagerIswriteable(pPage->pDbPage) );
-
- if( nSrc>0 ){
- if( n>nSrc ) n = nSrc;
- assert( pSrc );
- memcpy(pPayload, pSrc, n);
- }else{
- memset(pPayload, 0, n);
- }
- nPayload -= n;
- pPayload += n;
- pSrc += n;
- nSrc -= n;
- spaceLeft -= n;
- if( nSrc==0 ){
- nSrc = nData;
- pSrc = pData;
- }
}
releasePage(pToRelease);
return SQLITE_OK;
int hdr; /* Beginning of the header. 0 most pages. 100 page 1 */
if( *pRC ) return;
-
assert( idx>=0 && idx<pPage->nCell );
assert( CORRUPT_DB || sz==cellSize(pPage, idx) );
assert( sqlite3PagerIswriteable(pPage->pDbPage) );
hdr = pPage->hdrOffset;
testcase( pc==get2byte(&data[hdr+5]) );
testcase( pc+sz==pPage->pBt->usableSize );
- if( pc < (u32)get2byte(&data[hdr+5]) || pc+sz > pPage->pBt->usableSize ){
+ if( pc+sz > pPage->pBt->usableSize ){
*pRC = SQLITE_CORRUPT_BKPT;
return;
}
** in pTemp or the original pCell) and also record its index.
** Allocating a new entry in pPage->aCell[] implies that
** pPage->nOverflow is incremented.
+**
+** *pRC must be SQLITE_OK when this routine is called.
*/
static void insertCell(
MemPage *pPage, /* Page into which we are copying */
u8 *data; /* The content of the whole page */
u8 *pIns; /* The point in pPage->aCellIdx[] where no cell inserted */
- if( *pRC ) return;
-
+ assert( *pRC==SQLITE_OK );
assert( i>=0 && i<=pPage->nCell+pPage->nOverflow );
assert( MX_CELL(pPage->pBt)<=10921 );
assert( pPage->nCell<=MX_CELL(pPage->pBt) || CORRUPT_DB );
put4byte(pCell, iChild);
}
j = pPage->nOverflow++;
- assert( j<(int)(sizeof(pPage->apOvfl)/sizeof(pPage->apOvfl[0])) );
+ /* Comparison against ArraySize-1 since we hold back one extra slot
+ ** as a contingency. In other words, never need more than 3 overflow
+ ** slots but 4 are allocated, just to be safe. */
+ assert( j < ArraySize(pPage->apOvfl)-1 );
pPage->apOvfl[j] = pCell;
pPage->aiOvfl[j] = (u16)i;
/*
** A CellArray object contains a cache of pointers and sizes for a
-** consecutive sequence of cells that might be held multiple pages.
+** consecutive sequence of cells that might be held on multiple pages.
*/
typedef struct CellArray CellArray;
struct CellArray {
pData = pEnd;
for(i=0; i<nCell; i++){
u8 *pCell = apCell[i];
- if( pCell>aData && pCell<pEnd ){
+ if( SQLITE_WITHIN(pCell,aData,pEnd) ){
pCell = &pTmp[pCell - aData];
}
pData -= szCell[i];
u8 *pSlot;
sz = cachedCellSize(pCArray, i);
if( (aData[1]==0 && aData[2]==0) || (pSlot = pageFindSlot(pPg,sz,&rc))==0 ){
+ if( (pData - pBegin)<sz ) return 1;
pData -= sz;
- if( pData<pBegin ) return 1;
pSlot = pData;
}
/* pSlot and pCArray->apCell[i] will never overlap on a well-formed
for(i=iFirst; i<iEnd; i++){
u8 *pCell = pCArray->apCell[i];
- if( pCell>=pStart && pCell<pEnd ){
+ if( SQLITE_WITHIN(pCell, pStart, pEnd) ){
int sz;
/* No need to use cachedCellSize() here. The sizes of all cells that
** are to be freed have already been computing while deciding which
for(i=0; i<nNew && !CORRUPT_DB; i++){
u8 *pCell = pCArray->apCell[i+iNew];
int iOff = get2byteAligned(&pPg->aCellIdx[i*2]);
- if( pCell>=aData && pCell<&aData[pPg->pBt->usableSize] ){
+ if( SQLITE_WITHIN(pCell, aData, &aData[pPg->pBt->usableSize]) ){
pCell = &pTmp[pCell - aData];
}
assert( 0==memcmp(pCell, &aData[iOff],
while( ((*(pOut++) = *(pCell++))&0x80) && pCell<pStop );
/* Insert the new divider cell into pParent. */
- insertCell(pParent, pParent->nCell, pSpace, (int)(pOut-pSpace),
- 0, pPage->pgno, &rc);
+ if( rc==SQLITE_OK ){
+ insertCell(pParent, pParent->nCell, pSpace, (int)(pOut-pSpace),
+ 0, pPage->pgno, &rc);
+ }
/* Set the right-child pointer of pParent to point to the new page. */
put4byte(&pParent->aData[pParent->hdrOffset+8], pgnoNew);
z = findCell(pPage, j);
pPage->xParseCell(pPage, z, &info);
- if( info.iOverflow ){
- Pgno ovfl = get4byte(&z[info.iOverflow]);
+ if( info.nLocal<info.nPayload ){
+ Pgno ovfl = get4byte(&z[info.nSize-4]);
ptrmapGet(pBt, ovfl, &e, &n);
assert( n==pPage->pgno && e==PTRMAP_OVERFLOW1 );
}
** If aOvflSpace is set to a null pointer, this function returns
** SQLITE_NOMEM.
*/
-#if defined(_MSC_VER) && _MSC_VER >= 1700 && defined(_M_ARM)
-#pragma optimize("", off)
-#endif
static int balance_nonroot(
MemPage *pParent, /* Parent page of siblings being balanced */
int iParentIdx, /* Index of "the page" in pParent */
assert( pParent->nOverflow==0 || pParent->aiOvfl[0]==iParentIdx );
if( !aOvflSpace ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/* Find the sibling pages to balance. Also locate the cells in pParent
nMaxCells += 1+apOld[i]->nCell+apOld[i]->nOverflow;
if( (i--)==0 ) break;
- if( i+nxDiv==pParent->aiOvfl[0] && pParent->nOverflow ){
+ if( pParent->nOverflow && i+nxDiv==pParent->aiOvfl[0] ){
apDiv[i] = pParent->apOvfl[0];
pgno = get4byte(apDiv[i]);
szNew[i] = pParent->xCellSize(pParent, apDiv[i]);
** In this case, temporarily copy the cell into the aOvflSpace[]
** buffer. It will be copied out again as soon as the aSpace[] buffer
** is allocated. */
- if( pBt->btsFlags & BTS_SECURE_DELETE ){
+ if( pBt->btsFlags & BTS_FAST_SECURE ){
int iOff;
iOff = SQLITE_PTR_TO_INT(apDiv[i]) - SQLITE_PTR_TO_INT(pParent->aData);
+ nMaxCells*sizeof(u16) /* b.szCell */
+ pBt->pageSize; /* aSpace1 */
- /* EVIDENCE-OF: R-28375-38319 SQLite will never request a scratch buffer
- ** that is more than 6 times the database page size. */
assert( szScratch<=6*(int)pBt->pageSize );
- b.apCell = sqlite3ScratchMalloc( szScratch );
+ b.apCell = sqlite3StackAllocRaw(0, szScratch );
if( b.apCell==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto balance_cleanup;
}
b.szCell = (u16*)&b.apCell[nMaxCells];
}
/* Load b.apCell[] with pointers to all cells in pOld. If pOld
- ** constains overflow cells, include them in the b.apCell[] array
+ ** contains overflow cells, include them in the b.apCell[] array
** in the correct spot.
**
** Note that when there are multiple overflow cells, it is always the
** long be able to find the cells if a pointer to each cell is not saved
** first.
*/
- memset(&b.szCell[b.nCell], 0, sizeof(b.szCell[0])*limit);
+ memset(&b.szCell[b.nCell], 0, sizeof(b.szCell[0])*(limit+pOld->nOverflow));
if( pOld->nOverflow>0 ){
- memset(&b.szCell[b.nCell+limit], 0, sizeof(b.szCell[0])*pOld->nOverflow);
limit = pOld->aiOvfl[0];
for(j=0; j<limit; j++){
b.apCell[b.nCell] = aData + (maskPage & get2byteAligned(piCell));
for(i=0; i<nOld; i++){
MemPage *p = apOld[i];
szNew[i] = usableSpace - p->nFree;
- if( szNew[i]<0 ){ rc = SQLITE_CORRUPT_BKPT; goto balance_cleanup; }
for(j=0; j<p->nOverflow; j++){
szNew[i] += 2 + p->xCellSize(p, p->apOvfl[j]);
}
assert( r<nMaxCells );
(void)cachedCellSize(&b, r);
if( szRight!=0
- && (bBulk || szRight+b.szCell[d]+2 > szLeft-(b.szCell[r]+2)) ){
+ && (bBulk || szRight+b.szCell[d]+2 > szLeft-(b.szCell[r]+(i==k-1?0:2)))){
break;
}
szRight += b.szCell[d] + 2;
** overflow cell), we can skip updating the pointer map entries. */
if( iOld>=nNew
|| pNew->pgno!=aPgno[iOld]
- || pCell<aOld
- || pCell>=&aOld[usableSize]
+ || !SQLITE_WITHIN(pCell,aOld,&aOld[usableSize])
){
if( !leafCorrection ){
ptrmapPut(pBt, get4byte(pCell), PTRMAP_BTREE, pNew->pgno, &rc);
** any cell). But it is important to pass the correct size to
** insertCell(), so reparse the cell now.
**
- ** Note that this can never happen in an SQLite data file, as all
- ** cells are at least 4 bytes. It only happens in b-trees used
- ** to evaluate "IN (SELECT ...)" and similar clauses.
+ ** This can only happen for b-trees used to evaluate "IN (SELECT ...)"
+ ** and WITHOUT ROWID tables with exactly one column which is the
+ ** primary key.
*/
if( b.szCell[j]==4 ){
assert(leafCorrection==4);
** free space needs to be up front.
*/
assert( nNew==1 || CORRUPT_DB );
- rc = defragmentPage(apNew[0]);
+ rc = defragmentPage(apNew[0], -1);
testcase( rc!=SQLITE_OK );
assert( apNew[0]->nFree ==
(get2byte(&apNew[0]->aData[5])-apNew[0]->cellOffset-apNew[0]->nCell*2)
** Cleanup before returning.
*/
balance_cleanup:
- sqlite3ScratchFree(b.apCell);
+ sqlite3StackFree(0, b.apCell);
for(i=0; i<nOld; i++){
releasePage(apOld[i]);
}
return rc;
}
-#if defined(_MSC_VER) && _MSC_VER >= 1700 && defined(_M_ARM)
-#pragma optimize("", on)
-#endif
/*
u8 aBalanceQuickSpace[13];
u8 *pFree = 0;
- TESTONLY( int balance_quick_called = 0 );
- TESTONLY( int balance_deeper_called = 0 );
+ VVA_ONLY( int balance_quick_called = 0 );
+ VVA_ONLY( int balance_deeper_called = 0 );
do {
int iPage = pCur->iPage;
- MemPage *pPage = pCur->apPage[iPage];
+ MemPage *pPage = pCur->pPage;
if( iPage==0 ){
if( pPage->nOverflow ){
** and copy the current contents of the root-page to it. The
** next iteration of the do-loop will balance the child page.
*/
- assert( (balance_deeper_called++)==0 );
+ assert( balance_deeper_called==0 );
+ VVA_ONLY( balance_deeper_called++ );
rc = balance_deeper(pPage, &pCur->apPage[1]);
if( rc==SQLITE_OK ){
pCur->iPage = 1;
+ pCur->ix = 0;
pCur->aiIdx[0] = 0;
- pCur->aiIdx[1] = 0;
- assert( pCur->apPage[1]->nOverflow );
+ pCur->apPage[0] = pPage;
+ pCur->pPage = pCur->apPage[1];
+ assert( pCur->pPage->nOverflow );
}
}else{
break;
** function. If this were not verified, a subtle bug involving reuse
** of the aBalanceQuickSpace[] might sneak in.
*/
- assert( (balance_quick_called++)==0 );
+ assert( balance_quick_called==0 );
+ VVA_ONLY( balance_quick_called++ );
rc = balance_quick(pParent, pPage, aBalanceQuickSpace);
}else
#endif
releasePage(pPage);
pCur->iPage--;
assert( pCur->iPage>=0 );
+ pCur->pPage = pCur->apPage[pCur->iPage];
}
}while( rc==SQLITE_OK );
/*
-** Insert a new record into the BTree. The key is given by (pKey,nKey)
-** and the data is given by (pData,nData). The cursor is used only to
-** define what table the record should be inserted into. The cursor
-** is left pointing at a random location.
+** Insert a new record into the BTree. The content of the new record
+** is described by the pX object. The pCur cursor is used only to
+** define what table the record should be inserted into, and is left
+** pointing at a random location.
+**
+** For a table btree (used for rowid tables), only the pX.nKey value of
+** the key is used. The pX.pKey value must be NULL. The pX.nKey is the
+** rowid or INTEGER PRIMARY KEY of the row. The pX.nData,pData,nZero fields
+** hold the content of the row.
**
-** For an INTKEY table, only the nKey value of the key is used. pKey is
-** ignored. For a ZERODATA table, the pData and nData are both ignored.
+** For an index btree (used for indexes and WITHOUT ROWID tables), the
+** key is an arbitrary byte sequence stored in pX.pKey,nKey. The
+** pX.pData,nData,nZero fields must be zero.
**
** If the seekResult parameter is non-zero, then a successful call to
-** MovetoUnpacked() to seek cursor pCur to (pKey, nKey) has already
-** been performed. seekResult is the search result returned (a negative
-** number if pCur points at an entry that is smaller than (pKey, nKey), or
-** a positive value if pCur points at an entry that is larger than
-** (pKey, nKey)).
-**
-** If the seekResult parameter is non-zero, then the caller guarantees that
-** cursor pCur is pointing at the existing copy of a row that is to be
-** overwritten. If the seekResult parameter is 0, then cursor pCur may
-** point to any entry or to no entry at all and so this function has to seek
-** the cursor before the new key can be inserted.
+** MovetoUnpacked() to seek cursor pCur to (pKey,nKey) has already
+** been performed. In other words, if seekResult!=0 then the cursor
+** is currently pointing to a cell that will be adjacent to the cell
+** to be inserted. If seekResult<0 then pCur points to a cell that is
+** smaller then (pKey,nKey). If seekResult>0 then pCur points to a cell
+** that is larger than (pKey,nKey).
+**
+** If seekResult==0, that means pCur is pointing at some unknown location.
+** In that case, this routine must seek the cursor to the correct insertion
+** point for (pKey,nKey) before doing the insertion. For index btrees,
+** if pX->nMem is non-zero, then pX->aMem contains pointers to the unpacked
+** key values and pX->aMem can be used instead of pX->pKey to avoid having
+** to decode the key.
*/
SQLITE_PRIVATE int sqlite3BtreeInsert(
BtCursor *pCur, /* Insert data into the table of this cursor */
- const void *pKey, i64 nKey, /* The key of the new record */
- const void *pData, int nData, /* The data of the new record */
- int nZero, /* Number of extra 0 bytes to append to data */
- int appendBias, /* True if this is likely an append */
+ const BtreePayload *pX, /* Content of the row to be inserted */
+ int flags, /* True if this is likely an append */
int seekResult /* Result of prior MovetoUnpacked() call */
){
int rc;
unsigned char *oldCell;
unsigned char *newCell = 0;
+ assert( (flags & (BTREE_SAVEPOSITION|BTREE_APPEND))==flags );
+
if( pCur->eState==CURSOR_FAULT ){
assert( pCur->skipNext!=SQLITE_OK );
return pCur->skipNext;
}
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( (pCur->curFlags & BTCF_WriteFlag)!=0
&& pBt->inTransaction==TRANS_WRITE
&& (pBt->btsFlags & BTS_READ_ONLY)==0 );
** keys with no associated data. If the cursor was opened expecting an
** intkey table, the caller should be inserting integer keys with a
** blob of associated data. */
- assert( (pKey==0)==(pCur->pKeyInfo==0) );
+ assert( (pX->pKey==0)==(pCur->pKeyInfo==0) );
/* Save the positions of any other cursors open on this table.
**
}
if( pCur->pKeyInfo==0 ){
- assert( pKey==0 );
+ assert( pX->pKey==0 );
/* If this is an insert into a table b-tree, invalidate any incrblob
** cursors open on the row being replaced */
- invalidateIncrblobCursors(p, nKey, 0);
+ invalidateIncrblobCursors(p, pCur->pgnoRoot, pX->nKey, 0);
+
+ /* If BTREE_SAVEPOSITION is set, the cursor must already be pointing
+ ** to a row with the same key as the new entry being inserted. */
+ assert( (flags & BTREE_SAVEPOSITION)==0 ||
+ ((pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey) );
/* If the cursor is currently on the last row and we are appending a
** new row onto the end, set the "loc" to avoid an unnecessary
** btreeMoveto() call */
- if( (pCur->curFlags&BTCF_ValidNKey)!=0 && nKey>0
- && pCur->info.nKey==nKey-1 ){
- loc = -1;
+ if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey ){
+ loc = 0;
}else if( loc==0 ){
- rc = sqlite3BtreeMovetoUnpacked(pCur, 0, nKey, appendBias, &loc);
+ rc = sqlite3BtreeMovetoUnpacked(pCur, 0, pX->nKey, flags!=0, &loc);
if( rc ) return rc;
}
- }else if( loc==0 ){
- rc = btreeMoveto(pCur, pKey, nKey, appendBias, &loc);
+ }else if( loc==0 && (flags & BTREE_SAVEPOSITION)==0 ){
+ if( pX->nMem ){
+ UnpackedRecord r;
+ r.pKeyInfo = pCur->pKeyInfo;
+ r.aMem = pX->aMem;
+ r.nField = pX->nMem;
+ r.default_rc = 0;
+ r.errCode = 0;
+ r.r1 = 0;
+ r.r2 = 0;
+ r.eqSeen = 0;
+ rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, flags!=0, &loc);
+ }else{
+ rc = btreeMoveto(pCur, pX->pKey, pX->nKey, flags!=0, &loc);
+ }
if( rc ) return rc;
}
assert( pCur->eState==CURSOR_VALID || (pCur->eState==CURSOR_INVALID && loc) );
- pPage = pCur->apPage[pCur->iPage];
- assert( pPage->intKey || nKey>=0 );
+ pPage = pCur->pPage;
+ assert( pPage->intKey || pX->nKey>=0 );
assert( pPage->leaf || !pPage->intKey );
TRACE(("INSERT: table=%d nkey=%lld ndata=%d page=%d %s\n",
- pCur->pgnoRoot, nKey, nData, pPage->pgno,
+ pCur->pgnoRoot, pX->nKey, pX->nData, pPage->pgno,
loc==0 ? "overwrite" : "new entry"));
assert( pPage->isInit );
newCell = pBt->pTmpSpace;
assert( newCell!=0 );
- rc = fillInCell(pPage, newCell, pKey, nKey, pData, nData, nZero, &szNew);
+ rc = fillInCell(pPage, newCell, pX, &szNew);
if( rc ) goto end_insert;
assert( szNew==pPage->xCellSize(pPage, newCell) );
assert( szNew <= MX_CELL_SIZE(pBt) );
- idx = pCur->aiIdx[pCur->iPage];
+ idx = pCur->ix;
if( loc==0 ){
- u16 szOld;
+ CellInfo info;
assert( idx<pPage->nCell );
rc = sqlite3PagerWrite(pPage->pDbPage);
if( rc ){
if( !pPage->leaf ){
memcpy(newCell, oldCell, 4);
}
- rc = clearCell(pPage, oldCell, &szOld);
- dropCell(pPage, idx, szOld, &rc);
+ rc = clearCell(pPage, oldCell, &info);
+ if( info.nSize==szNew && info.nLocal==info.nPayload
+ && (!ISAUTOVACUUM || szNew<pPage->minLocal)
+ ){
+ /* Overwrite the old cell with the new if they are the same size.
+ ** We could also try to do this if the old cell is smaller, then add
+ ** the leftover space to the free list. But experiments show that
+ ** doing that is no faster then skipping this optimization and just
+ ** calling dropCell() and insertCell().
+ **
+ ** This optimization cannot be used on an autovacuum database if the
+ ** new entry uses overflow pages, as the insertCell() call below is
+ ** necessary to add the PTRMAP_OVERFLOW1 pointer-map entry. */
+ assert( rc==SQLITE_OK ); /* clearCell never fails when nLocal==nPayload */
+ if( oldCell+szNew > pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT;
+ memcpy(oldCell, newCell, szNew);
+ return SQLITE_OK;
+ }
+ dropCell(pPage, idx, info.nSize, &rc);
if( rc ) goto end_insert;
}else if( loc<0 && pPage->nCell>0 ){
assert( pPage->leaf );
- idx = ++pCur->aiIdx[pCur->iPage];
+ idx = ++pCur->ix;
+ pCur->curFlags &= ~BTCF_ValidNKey;
}else{
assert( pPage->leaf );
}
insertCell(pPage, idx, newCell, szNew, 0, 0, &rc);
+ assert( pPage->nOverflow==0 || rc==SQLITE_OK );
assert( rc!=SQLITE_OK || pPage->nCell>0 || pPage->nOverflow>0 );
/* If no error has occurred and pPage has an overflow cell, call balance()
** row without seeking the cursor. This can be a big performance boost.
*/
pCur->info.nSize = 0;
- if( rc==SQLITE_OK && pPage->nOverflow ){
+ if( pPage->nOverflow ){
+ assert( rc==SQLITE_OK );
pCur->curFlags &= ~(BTCF_ValidNKey);
rc = balance(pCur);
** fails. Internal data structure corruption will result otherwise.
** Also, set the cursor state to invalid. This stops saveCursorPosition()
** from trying to save the current position of the cursor. */
- pCur->apPage[pCur->iPage]->nOverflow = 0;
+ pCur->pPage->nOverflow = 0;
pCur->eState = CURSOR_INVALID;
+ if( (flags & BTREE_SAVEPOSITION) && rc==SQLITE_OK ){
+ btreeReleaseAllCursorPages(pCur);
+ if( pCur->pKeyInfo ){
+ assert( pCur->pKey==0 );
+ pCur->pKey = sqlite3Malloc( pX->nKey );
+ if( pCur->pKey==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ memcpy(pCur->pKey, pX->pKey, pX->nKey);
+ }
+ }
+ pCur->eState = CURSOR_REQUIRESEEK;
+ pCur->nKey = pX->nKey;
+ }
}
- assert( pCur->apPage[pCur->iPage]->nOverflow==0 );
+ assert( pCur->iPage<0 || pCur->pPage->nOverflow==0 );
end_insert:
return rc;
/*
** Delete the entry that the cursor is pointing to.
**
-** If the second parameter is zero, then the cursor is left pointing at an
-** arbitrary location after the delete. If it is non-zero, then the cursor
-** is left in a state such that the next call to BtreeNext() or BtreePrev()
-** moves it to the same row as it would if the call to BtreeDelete() had
-** been omitted.
-*/
-SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, int bPreserve){
+** If the BTREE_SAVEPOSITION bit of the flags parameter is zero, then
+** the cursor is left pointing at an arbitrary location after the delete.
+** But if that bit is set, then the cursor is left in a state such that
+** the next call to BtreeNext() or BtreePrev() moves it to the same row
+** as it would have been on if the call to BtreeDelete() had been omitted.
+**
+** The BTREE_AUXDELETE bit of flags indicates that is one of several deletes
+** associated with a single table entry and its indexes. Only one of those
+** deletes is considered the "primary" delete. The primary delete occurs
+** on a cursor that is not a BTREE_FORDELETE cursor. All but one delete
+** operation on non-FORDELETE cursors is tagged with the AUXDELETE flag.
+** The BTREE_AUXDELETE bit is a hint that is not used by this implementation,
+** but which might be used by alternative storage engines.
+*/
+SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){
Btree *p = pCur->pBtree;
BtShared *pBt = p->pBt;
int rc; /* Return code */
unsigned char *pCell; /* Pointer to cell to delete */
int iCellIdx; /* Index of cell to delete */
int iCellDepth; /* Depth of node containing pCell */
- u16 szCell; /* Size of the cell being deleted */
+ CellInfo info; /* Size of the cell being deleted */
int bSkipnext = 0; /* Leaf cursor in SKIPNEXT state */
+ u8 bPreserve = flags & BTREE_SAVEPOSITION; /* Keep cursor valid */
- assert( cursorHoldsMutex(pCur) );
+ assert( cursorOwnsBtShared(pCur) );
assert( pBt->inTransaction==TRANS_WRITE );
assert( (pBt->btsFlags & BTS_READ_ONLY)==0 );
assert( pCur->curFlags & BTCF_WriteFlag );
assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) );
assert( !hasReadConflicts(p, pCur->pgnoRoot) );
- assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell );
+ assert( pCur->ix<pCur->pPage->nCell );
assert( pCur->eState==CURSOR_VALID );
+ assert( (flags & ~(BTREE_SAVEPOSITION | BTREE_AUXDELETE))==0 );
iCellDepth = pCur->iPage;
- iCellIdx = pCur->aiIdx[iCellDepth];
- pPage = pCur->apPage[iCellDepth];
+ iCellIdx = pCur->ix;
+ pPage = pCur->pPage;
pCell = findCell(pPage, iCellIdx);
+ /* If the bPreserve flag is set to true, then the cursor position must
+ ** be preserved following this delete operation. If the current delete
+ ** will cause a b-tree rebalance, then this is done by saving the cursor
+ ** key and leaving the cursor in CURSOR_REQUIRESEEK state before
+ ** returning.
+ **
+ ** Or, if the current delete will not cause a rebalance, then the cursor
+ ** will be left in CURSOR_SKIPNEXT state pointing to the entry immediately
+ ** before or after the deleted entry. In this case set bSkipnext to true. */
+ if( bPreserve ){
+ if( !pPage->leaf
+ || (pPage->nFree+cellSizePtr(pPage,pCell)+2)>(int)(pBt->usableSize*2/3)
+ ){
+ /* A b-tree rebalance will be required after deleting this entry.
+ ** Save the cursor key. */
+ rc = saveCursorKey(pCur);
+ if( rc ) return rc;
+ }else{
+ bSkipnext = 1;
+ }
+ }
+
/* If the page containing the entry to delete is not a leaf page, move
** the cursor to the largest entry in the tree that is smaller than
** the entry being deleted. This cell will replace the cell being deleted
** sub-tree headed by the child page of the cell being deleted. This makes
** balancing the tree following the delete operation easier. */
if( !pPage->leaf ){
- int notUsed = 0;
- rc = sqlite3BtreePrevious(pCur, ¬Used);
+ rc = sqlite3BtreePrevious(pCur, 0);
+ assert( rc!=SQLITE_DONE );
if( rc ) return rc;
}
/* If this is a delete operation to remove a row from a table b-tree,
** invalidate any incrblob cursors open on the row being deleted. */
if( pCur->pKeyInfo==0 ){
- invalidateIncrblobCursors(p, pCur->info.nKey, 0);
- }
-
- /* If the bPreserve flag is set to true, then the cursor position must
- ** be preserved following this delete operation. If the current delete
- ** will cause a b-tree rebalance, then this is done by saving the cursor
- ** key and leaving the cursor in CURSOR_REQUIRESEEK state before
- ** returning.
- **
- ** Or, if the current delete will not cause a rebalance, then the cursor
- ** will be left in CURSOR_SKIPNEXT state pointing to the entry immediately
- ** before or after the deleted entry. In this case set bSkipnext to true. */
- if( bPreserve ){
- if( !pPage->leaf
- || (pPage->nFree+cellSizePtr(pPage,pCell)+2)>(int)(pBt->usableSize*2/3)
- ){
- /* A b-tree rebalance will be required after deleting this entry.
- ** Save the cursor key. */
- rc = saveCursorKey(pCur);
- if( rc ) return rc;
- }else{
- bSkipnext = 1;
- }
+ invalidateIncrblobCursors(p, pCur->pgnoRoot, pCur->info.nKey, 0);
}
/* Make the page containing the entry to be deleted writable. Then free any
** itself from within the page. */
rc = sqlite3PagerWrite(pPage->pDbPage);
if( rc ) return rc;
- rc = clearCell(pPage, pCell, &szCell);
- dropCell(pPage, iCellIdx, szCell, &rc);
+ rc = clearCell(pPage, pCell, &info);
+ dropCell(pPage, iCellIdx, info.nSize, &rc);
if( rc ) return rc;
/* If the cell deleted was not located on a leaf page, then the cursor
** node. The cell from the leaf node needs to be moved to the internal
** node to replace the deleted cell. */
if( !pPage->leaf ){
- MemPage *pLeaf = pCur->apPage[pCur->iPage];
+ MemPage *pLeaf = pCur->pPage;
int nCell;
- Pgno n = pCur->apPage[iCellDepth+1]->pgno;
+ Pgno n;
unsigned char *pTmp;
+ if( iCellDepth<pCur->iPage-1 ){
+ n = pCur->apPage[iCellDepth+1]->pgno;
+ }else{
+ n = pCur->pPage->pgno;
+ }
pCell = findCell(pLeaf, pLeaf->nCell-1);
if( pCell<&pLeaf->aData[4] ) return SQLITE_CORRUPT_BKPT;
nCell = pLeaf->xCellSize(pLeaf, pCell);
pTmp = pBt->pTmpSpace;
assert( pTmp!=0 );
rc = sqlite3PagerWrite(pLeaf->pDbPage);
- insertCell(pPage, iCellIdx, pCell-4, nCell+4, pTmp, n, &rc);
+ if( rc==SQLITE_OK ){
+ insertCell(pPage, iCellIdx, pCell-4, nCell+4, pTmp, n, &rc);
+ }
dropCell(pLeaf, pLeaf->nCell-1, nCell, &rc);
if( rc ) return rc;
}
** well. */
rc = balance(pCur);
if( rc==SQLITE_OK && pCur->iPage>iCellDepth ){
+ releasePageNotNull(pCur->pPage);
+ pCur->iPage--;
while( pCur->iPage>iCellDepth ){
releasePage(pCur->apPage[pCur->iPage--]);
}
+ pCur->pPage = pCur->apPage[pCur->iPage];
rc = balance(pCur);
}
if( rc==SQLITE_OK ){
if( bSkipnext ){
- assert( bPreserve && pCur->iPage==iCellDepth );
- assert( pPage==pCur->apPage[pCur->iPage] );
+ assert( bPreserve && (pCur->iPage==iCellDepth || CORRUPT_DB) );
+ assert( pPage==pCur->pPage || CORRUPT_DB );
assert( (pPage->nCell>0 || CORRUPT_DB) && iCellIdx<=pPage->nCell );
pCur->eState = CURSOR_SKIPNEXT;
if( iCellIdx>=pPage->nCell ){
pCur->skipNext = -1;
- pCur->aiIdx[iCellDepth] = pPage->nCell-1;
+ pCur->ix = pPage->nCell-1;
}else{
pCur->skipNext = 1;
}
}else{
rc = moveToRoot(pCur);
if( bPreserve ){
+ btreeReleaseAllCursorPages(pCur);
pCur->eState = CURSOR_REQUIRESEEK;
}
+ if( rc==SQLITE_EMPTY ) rc = SQLITE_OK;
}
}
return rc;
unsigned char *pCell;
int i;
int hdr;
- u16 szCell;
+ CellInfo info;
assert( sqlite3_mutex_held(pBt->mutex) );
if( pgno>btreePagecount(pBt) ){
rc = clearDatabasePage(pBt, get4byte(pCell), 1, pnChange);
if( rc ) goto cleardatabasepage_out;
}
- rc = clearCell(pPage, pCell, &szCell);
+ rc = clearCell(pPage, pCell, &info);
if( rc ) goto cleardatabasepage_out;
}
if( !pPage->leaf ){
/* Invalidate all incrblob cursors open on table iTable (assuming iTable
** is the root of a table b-tree - if it is not, the following call is
** a no-op). */
- invalidateIncrblobCursors(p, 0, 1);
+ invalidateIncrblobCursors(p, (Pgno)iTable, 0, 1);
rc = clearDatabasePage(pBt, (Pgno)iTable, 0, pnChange);
}
sqlite3BtreeLeave(p);
assert( sqlite3BtreeHoldsMutex(p) );
assert( p->inTrans==TRANS_WRITE );
-
- /* It is illegal to drop a table if any cursors are open on the
- ** database. This is because in auto-vacuum mode the backend may
- ** need to move another root-page to fill a gap left by the deleted
- ** root page. If an open cursor was using this page a problem would
- ** occur.
- **
- ** This error is caught long before control reaches this point.
- */
- if( NEVER(pBt->pCursor) ){
- sqlite3ConnectionBlocked(p->db, pBt->pCursor->pBtree->db);
- return SQLITE_LOCKED_SHAREDCACHE;
- }
+ assert( iTable>=2 );
rc = btreeGetPage(pBt, (Pgno)iTable, &pPage, 0);
if( rc ) return rc;
*piMoved = 0;
- if( iTable>1 ){
#ifdef SQLITE_OMIT_AUTOVACUUM
- freePage(pPage, &rc);
- releasePage(pPage);
+ freePage(pPage, &rc);
+ releasePage(pPage);
#else
- if( pBt->autoVacuum ){
- Pgno maxRootPgno;
- sqlite3BtreeGetMeta(p, BTREE_LARGEST_ROOT_PAGE, &maxRootPgno);
-
- if( iTable==maxRootPgno ){
- /* If the table being dropped is the table with the largest root-page
- ** number in the database, put the root page on the free list.
- */
- freePage(pPage, &rc);
- releasePage(pPage);
- if( rc!=SQLITE_OK ){
- return rc;
- }
- }else{
- /* The table being dropped does not have the largest root-page
- ** number in the database. So move the page that does into the
- ** gap left by the deleted root-page.
- */
- MemPage *pMove;
- releasePage(pPage);
- rc = btreeGetPage(pBt, maxRootPgno, &pMove, 0);
- if( rc!=SQLITE_OK ){
- return rc;
- }
- rc = relocatePage(pBt, pMove, PTRMAP_ROOTPAGE, 0, iTable, 0);
- releasePage(pMove);
- if( rc!=SQLITE_OK ){
- return rc;
- }
- pMove = 0;
- rc = btreeGetPage(pBt, maxRootPgno, &pMove, 0);
- freePage(pMove, &rc);
- releasePage(pMove);
- if( rc!=SQLITE_OK ){
- return rc;
- }
- *piMoved = maxRootPgno;
- }
+ if( pBt->autoVacuum ){
+ Pgno maxRootPgno;
+ sqlite3BtreeGetMeta(p, BTREE_LARGEST_ROOT_PAGE, &maxRootPgno);
- /* Set the new 'max-root-page' value in the database header. This
- ** is the old value less one, less one more if that happens to
- ** be a root-page number, less one again if that is the
- ** PENDING_BYTE_PAGE.
+ if( iTable==maxRootPgno ){
+ /* If the table being dropped is the table with the largest root-page
+ ** number in the database, put the root page on the free list.
*/
- maxRootPgno--;
- while( maxRootPgno==PENDING_BYTE_PAGE(pBt)
- || PTRMAP_ISPAGE(pBt, maxRootPgno) ){
- maxRootPgno--;
+ freePage(pPage, &rc);
+ releasePage(pPage);
+ if( rc!=SQLITE_OK ){
+ return rc;
}
- assert( maxRootPgno!=PENDING_BYTE_PAGE(pBt) );
-
- rc = sqlite3BtreeUpdateMeta(p, 4, maxRootPgno);
}else{
- freePage(pPage, &rc);
+ /* The table being dropped does not have the largest root-page
+ ** number in the database. So move the page that does into the
+ ** gap left by the deleted root-page.
+ */
+ MemPage *pMove;
releasePage(pPage);
+ rc = btreeGetPage(pBt, maxRootPgno, &pMove, 0);
+ if( rc!=SQLITE_OK ){
+ return rc;
+ }
+ rc = relocatePage(pBt, pMove, PTRMAP_ROOTPAGE, 0, iTable, 0);
+ releasePage(pMove);
+ if( rc!=SQLITE_OK ){
+ return rc;
+ }
+ pMove = 0;
+ rc = btreeGetPage(pBt, maxRootPgno, &pMove, 0);
+ freePage(pMove, &rc);
+ releasePage(pMove);
+ if( rc!=SQLITE_OK ){
+ return rc;
+ }
+ *piMoved = maxRootPgno;
}
-#endif
- }else{
- /* If sqlite3BtreeDropTable was called on page 1.
- ** This really never should happen except in a corrupt
- ** database.
+
+ /* Set the new 'max-root-page' value in the database header. This
+ ** is the old value less one, less one more if that happens to
+ ** be a root-page number, less one again if that is the
+ ** PENDING_BYTE_PAGE.
*/
- zeroPage(pPage, PTF_INTKEY|PTF_LEAF );
+ maxRootPgno--;
+ while( maxRootPgno==PENDING_BYTE_PAGE(pBt)
+ || PTRMAP_ISPAGE(pBt, maxRootPgno) ){
+ maxRootPgno--;
+ }
+ assert( maxRootPgno!=PENDING_BYTE_PAGE(pBt) );
+
+ rc = sqlite3BtreeUpdateMeta(p, 4, maxRootPgno);
+ }else{
+ freePage(pPage, &rc);
releasePage(pPage);
}
+#endif
return rc;
}
SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree *p, int iTable, int *piMoved){
i64 nEntry = 0; /* Value to return in *pnEntry */
int rc; /* Return code */
- if( pCur->pgnoRoot==0 ){
+ rc = moveToRoot(pCur);
+ if( rc==SQLITE_EMPTY ){
*pnEntry = 0;
return SQLITE_OK;
}
- rc = moveToRoot(pCur);
/* Unless an error occurs, the following loop runs one iteration for each
** page in the B-Tree structure (not including overflow pages).
** this page contains countable entries. Increment the entry counter
** accordingly.
*/
- pPage = pCur->apPage[pCur->iPage];
+ pPage = pCur->pPage;
if( pPage->leaf || !pPage->intKey ){
nEntry += pPage->nCell;
}
return moveToRoot(pCur);
}
moveToParent(pCur);
- }while ( pCur->aiIdx[pCur->iPage]>=pCur->apPage[pCur->iPage]->nCell );
+ }while ( pCur->ix>=pCur->pPage->nCell );
- pCur->aiIdx[pCur->iPage]++;
- pPage = pCur->apPage[pCur->iPage];
+ pCur->ix++;
+ pPage = pCur->pPage;
}
/* Descend to the child node of the cell that the cursor currently
** points at. This is the right-child if (iIdx==pPage->nCell).
*/
- iIdx = pCur->aiIdx[pCur->iPage];
+ iIdx = pCur->ix;
if( iIdx==pPage->nCell ){
rc = moveToChild(pCur, get4byte(&pPage->aData[pPage->hdrOffset+8]));
}else{
sqlite3StrAccumAppend(&pCheck->errMsg, "\n", 1);
}
if( pCheck->zPfx ){
- sqlite3XPrintf(&pCheck->errMsg, 0, pCheck->zPfx, pCheck->v1, pCheck->v2);
+ sqlite3XPrintf(&pCheck->errMsg, pCheck->zPfx, pCheck->v1, pCheck->v2);
}
- sqlite3VXPrintf(&pCheck->errMsg, 1, zFormat, ap);
+ sqlite3VXPrintf(&pCheck->errMsg, zFormat, ap);
va_end(ap);
if( pCheck->errMsg.accError==STRACCUM_NOMEM ){
pCheck->mallocFailed = 1;
break;
}
if( checkRef(pCheck, iPage) ) break;
- if( sqlite3PagerGet(pCheck->pPager, (Pgno)iPage, &pOvflPage) ){
+ if( sqlite3PagerGet(pCheck->pPager, (Pgno)iPage, &pOvflPage, 0) ){
checkAppendMsg(pCheck, "failed to get page %d", iPage);
break;
}
checkAppendMsg(pCheck, "Rowid %lld out of order", info.nKey);
}
maxKey = info.nKey;
+ keyCanBeEqual = 0; /* Only the first key on the page may ==maxKey */
}
/* Check the content overflow list */
if( info.nPayload>info.nLocal ){
int nPage; /* Number of pages on the overflow chain */
Pgno pgnoOvfl; /* First page of the overflow chain */
- assert( pc + info.iOverflow <= usableSize );
+ assert( pc + info.nSize - 4 <= usableSize );
nPage = (info.nPayload - info.nLocal + usableSize - 5)/(usableSize - 4);
- pgnoOvfl = get4byte(&pCell[info.iOverflow]);
+ pgnoOvfl = get4byte(&pCell[info.nSize - 4]);
#ifndef SQLITE_OMIT_AUTOVACUUM
if( pBt->autoVacuum ){
checkPtrmap(pCheck, pgnoOvfl, PTRMAP_OVERFLOW1, iPage);
sqlite3BtreeEnter(p);
assert( p->inTrans>TRANS_NONE && pBt->inTransaction>TRANS_NONE );
- assert( (nRef = sqlite3PagerRefcount(pBt->pPager))>=0 );
+ VVA_ONLY( nRef = sqlite3PagerRefcount(pBt->pPager) );
+ assert( nRef>=0 );
sCheck.pBt = pBt;
sCheck.pPager = pBt->pPager;
sCheck.nPage = btreePagecount(sCheck.pBt);
sCheck.aPgRef = 0;
sCheck.heap = 0;
sqlite3StrAccumInit(&sCheck.errMsg, 0, zErr, sizeof(zErr), SQLITE_MAX_LENGTH);
+ sCheck.errMsg.printfFlags = SQLITE_PRINTF_INTERNAL;
if( sCheck.nPage==0 ){
goto integrity_ck_cleanup;
}
if( pBt->inTransaction!=TRANS_NONE ){
rc = SQLITE_LOCKED;
}else{
- rc = sqlite3PagerCheckpoint(pBt->pPager, eMode, pnLog, pnCkpt);
+ rc = sqlite3PagerCheckpoint(pBt->pPager, p->db, eMode, pnLog, pnCkpt);
}
sqlite3BtreeLeave(p);
}
*/
SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor *pCsr, u32 offset, u32 amt, void *z){
int rc;
- assert( cursorHoldsMutex(pCsr) );
+ assert( cursorOwnsBtShared(pCsr) );
assert( sqlite3_mutex_held(pCsr->pBtree->db->mutex) );
assert( pCsr->curFlags & BTCF_Incrblob );
&& pCsr->pBt->inTransaction==TRANS_WRITE );
assert( hasSharedCacheTableLock(pCsr->pBtree, pCsr->pgnoRoot, 0, 2) );
assert( !hasReadConflicts(pCsr->pBtree, pCsr->pgnoRoot) );
- assert( pCsr->apPage[pCsr->iPage]->intKey );
+ assert( pCsr->pPage->intKey );
return accessPayload(pCsr, offset, amt, (unsigned char *)z, 1);
}
return rc;
}
-/*
-** set the mask of hint flags for cursor pCsr.
-*/
-SQLITE_PRIVATE void sqlite3BtreeCursorHints(BtCursor *pCsr, unsigned int mask){
- assert( mask==BTREE_BULKLOAD || mask==BTREE_SEEK_EQ || mask==0 );
- pCsr->hints = mask;
-}
-
-#ifdef SQLITE_DEBUG
/*
** Return true if the cursor has a hint specified. This routine is
** only used from within assert() statements
SQLITE_PRIVATE int sqlite3BtreeCursorHasHint(BtCursor *pCsr, unsigned int mask){
return (pCsr->hints & mask)!=0;
}
-#endif
/*
** Return true if the given Btree is read-only.
*/
SQLITE_PRIVATE int sqlite3HeaderSizeBtree(void){ return ROUND8(sizeof(MemPage)); }
+#if !defined(SQLITE_OMIT_SHARED_CACHE)
+/*
+** Return true if the Btree passed as the only argument is sharable.
+*/
+SQLITE_PRIVATE int sqlite3BtreeSharable(Btree *p){
+ return p->sharable;
+}
+
+/*
+** Return the number of connections to the BtShared object accessed by
+** the Btree handle passed as the only argument. For private caches
+** this is always 1. For shared caches it may be 1 or greater.
+*/
+SQLITE_PRIVATE int sqlite3BtreeConnectionCount(Btree *p){
+ testcase( p->sharable );
+ return p->pBt->nRef;
+}
+#endif
+
/************** End of btree.c ***********************************************/
/************** Begin file backup.c ******************************************/
/*
int i = sqlite3FindDbName(pDb, zDb);
if( i==1 ){
- Parse *pParse;
+ Parse sParse;
int rc = 0;
- pParse = sqlite3StackAllocZero(pErrorDb, sizeof(*pParse));
- if( pParse==0 ){
- sqlite3ErrorWithMsg(pErrorDb, SQLITE_NOMEM, "out of memory");
- rc = SQLITE_NOMEM;
- }else{
- pParse->db = pDb;
- if( sqlite3OpenTempDatabase(pParse) ){
- sqlite3ErrorWithMsg(pErrorDb, pParse->rc, "%s", pParse->zErrMsg);
- rc = SQLITE_ERROR;
- }
- sqlite3DbFree(pErrorDb, pParse->zErrMsg);
- sqlite3ParserReset(pParse);
- sqlite3StackFree(pErrorDb, pParse);
+ memset(&sParse, 0, sizeof(sParse));
+ sParse.db = pDb;
+ if( sqlite3OpenTempDatabase(&sParse) ){
+ sqlite3ErrorWithMsg(pErrorDb, sParse.rc, "%s", sParse.zErrMsg);
+ rc = SQLITE_ERROR;
}
+ sqlite3DbFree(pErrorDb, sParse.zErrMsg);
+ sqlite3ParserReset(&sParse);
if( rc ){
return 0;
}
** If an error occurs, NULL is returned and an error code and error message
** stored in database handle pDestDb.
*/
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
sqlite3* pDestDb, /* Database to write to */
const char *zDestDb, /* Name of database within pDestDb */
sqlite3* pSrcDb, /* Database connection to read from */
** sqlite3_backup_finish(). */
p = (sqlite3_backup *)sqlite3MallocZero(sizeof(sqlite3_backup));
if( !p ){
- sqlite3Error(pDestDb, SQLITE_NOMEM);
+ sqlite3Error(pDestDb, SQLITE_NOMEM_BKPT);
}
}
p->isAttached = 0;
if( 0==p->pSrc || 0==p->pDest
- || setDestPgsz(p)==SQLITE_NOMEM
|| checkReadTransaction(pDestDb, p->pDest)!=SQLITE_OK
){
/* One (or both) of the named databases did not exist or an OOM
DbPage *pDestPg = 0;
Pgno iDest = (Pgno)(iOff/nDestPgsz)+1;
if( iDest==PENDING_BYTE_PAGE(p->pDest->pBt) ) continue;
- if( SQLITE_OK==(rc = sqlite3PagerGet(pDestPager, iDest, &pDestPg))
+ if( SQLITE_OK==(rc = sqlite3PagerGet(pDestPager, iDest, &pDestPg, 0))
&& SQLITE_OK==(rc = sqlite3PagerWrite(pDestPg))
){
const u8 *zIn = &zSrcData[iOff%nSrcPgsz];
/*
** Copy nPage pages from the source b-tree to the destination.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage){
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage){
int rc;
int destMode; /* Destination journal mode */
int pgszSrc = 0; /* Source page size */
rc = SQLITE_OK;
}
- /* Lock the destination database, if it is not locked already. */
- if( SQLITE_OK==rc && p->bDestLocked==0
- && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2))
- ){
- p->bDestLocked = 1;
- sqlite3BtreeGetMeta(p->pDest, BTREE_SCHEMA_VERSION, &p->iDestSchema);
- }
-
/* If there is no open read-transaction on the source database, open
** one now. If a transaction is opened here, then it will be closed
** before this function exits.
bCloseTrans = 1;
}
+ /* If the destination database has not yet been locked (i.e. if this
+ ** is the first call to backup_step() for the current backup operation),
+ ** try to set its page size to the same as the source database. This
+ ** is especially important on ZipVFS systems, as in that case it is
+ ** not possible to create a database file that uses one page size by
+ ** writing to it with another. */
+ if( p->bDestLocked==0 && rc==SQLITE_OK && setDestPgsz(p)==SQLITE_NOMEM ){
+ rc = SQLITE_NOMEM;
+ }
+
+ /* Lock the destination database, if it is not locked already. */
+ if( SQLITE_OK==rc && p->bDestLocked==0
+ && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2))
+ ){
+ p->bDestLocked = 1;
+ sqlite3BtreeGetMeta(p->pDest, BTREE_SCHEMA_VERSION, &p->iDestSchema);
+ }
+
/* Do not allow backup if the destination database is in WAL mode
** and the page sizes are different between source and destination */
pgszSrc = sqlite3BtreeGetPageSize(p->pSrc);
const Pgno iSrcPg = p->iNext; /* Source page number */
if( iSrcPg!=PENDING_BYTE_PAGE(p->pSrc->pBt) ){
DbPage *pSrcPg; /* Source page object */
- rc = sqlite3PagerAcquire(pSrcPager, iSrcPg, &pSrcPg,
- PAGER_GET_READONLY);
+ rc = sqlite3PagerGet(pSrcPager, iSrcPg, &pSrcPg,PAGER_GET_READONLY);
if( rc==SQLITE_OK ){
rc = backupOnePage(p, iSrcPg, sqlite3PagerGetData(pSrcPg), 0);
sqlite3PagerUnref(pSrcPg);
for(iPg=nDestTruncate; rc==SQLITE_OK && iPg<=(Pgno)nDstPage; iPg++){
if( iPg!=PENDING_BYTE_PAGE(p->pDest->pBt) ){
DbPage *pPg;
- rc = sqlite3PagerGet(pDestPager, iPg, &pPg);
+ rc = sqlite3PagerGet(pDestPager, iPg, &pPg, 0);
if( rc==SQLITE_OK ){
rc = sqlite3PagerWrite(pPg);
sqlite3PagerUnref(pPg);
){
PgHdr *pSrcPg = 0;
const Pgno iSrcPg = (Pgno)((iOff/pgszSrc)+1);
- rc = sqlite3PagerGet(pSrcPager, iSrcPg, &pSrcPg);
+ rc = sqlite3PagerGet(pSrcPager, iSrcPg, &pSrcPg, 0);
if( rc==SQLITE_OK ){
u8 *zData = sqlite3PagerGetData(pSrcPg);
rc = sqlite3OsWrite(pFile, zData, pgszSrc, iOff);
}
if( rc==SQLITE_IOERR_NOMEM ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
p->rc = rc;
}
/*
** Release all resources associated with an sqlite3_backup* handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p){
sqlite3_backup **pp; /* Ptr to head of pagers backup list */
sqlite3 *pSrcDb; /* Source database connection */
int rc; /* Value to return */
** Return the number of pages still to be backed up as of the most recent
** call to sqlite3_backup_step().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p){
#ifdef SQLITE_ENABLE_API_ARMOR
if( p==0 ){
(void)SQLITE_MISUSE_BKPT;
** Return the total number of pages in the source database as of the most
** recent call to sqlite3_backup_step().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p){
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p){
#ifdef SQLITE_ENABLE_API_ARMOR
if( p==0 ){
(void)SQLITE_MISUSE_BKPT;
** sqlite3_backup_step(), we can guarantee that the copy finishes
** within a single call (unless an error occurs). The assert() statement
** checks this assumption - (p->rc) should be set to either SQLITE_DONE
- ** or an error code.
- */
+ ** or an error code. */
sqlite3_backup_step(&b, 0x7FFFFFFF);
assert( b.rc!=SQLITE_OK );
+
rc = sqlite3_backup_finish(&b);
if( rc==SQLITE_OK ){
pTo->pBt->btsFlags &= ~BTS_PAGESIZE_FIXED;
*/
SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem *p){
/* If MEM_Dyn is set then Mem.xDel!=0.
- ** Mem.xDel is might not be initialized if MEM_Dyn is clear.
+ ** Mem.xDel might not be initialized if MEM_Dyn is clear.
*/
assert( (p->flags & MEM_Dyn)==0 || p->xDel!=0 );
/* Cannot be both MEM_Int and MEM_Real at the same time */
assert( (p->flags & (MEM_Int|MEM_Real))!=(MEM_Int|MEM_Real) );
+ if( p->flags & MEM_Null ){
+ /* Cannot be both MEM_Null and some other type */
+ assert( (p->flags & (MEM_Int|MEM_Real|MEM_Str|MEM_Blob
+ |MEM_RowSet|MEM_Frame|MEM_Agg))==0 );
+
+ /* If MEM_Null is set, then either the value is a pure NULL (the usual
+ ** case) or it is a pointer set using sqlite3_bind_pointer() or
+ ** sqlite3_result_pointer(). If a pointer, then MEM_Term must also be
+ ** set.
+ */
+ if( (p->flags & (MEM_Term|MEM_Subtype))==(MEM_Term|MEM_Subtype) ){
+ /* This is a pointer type. There may be a flag to indicate what to
+ ** do with the pointer. */
+ assert( ((p->flags&MEM_Dyn)!=0 ? 1 : 0) +
+ ((p->flags&MEM_Ephem)!=0 ? 1 : 0) +
+ ((p->flags&MEM_Static)!=0 ? 1 : 0) <= 1 );
+
+ /* No other bits set */
+ assert( (p->flags & ~(MEM_Null|MEM_Term|MEM_Subtype
+ |MEM_Dyn|MEM_Ephem|MEM_Static))==0 );
+ }else{
+ /* A pure NULL might have other flags, such as MEM_Static, MEM_Dyn,
+ ** MEM_Ephem, MEM_Cleared, or MEM_Subtype */
+ }
+ }else{
+ /* The MEM_Cleared bit is only allowed on NULLs */
+ assert( (p->flags & MEM_Cleared)==0 );
+ }
+
/* The szMalloc field holds the correct memory allocation size */
assert( p->szMalloc==0
|| p->szMalloc==sqlite3DbMallocSize(p->db,p->zMalloc) );
}
#endif
+#ifdef SQLITE_DEBUG
+/*
+** Check that string value of pMem agrees with its integer or real value.
+**
+** A single int or real value always converts to the same strings. But
+** many different strings can be converted into the same int or real.
+** If a table contains a numeric value and an index is based on the
+** corresponding string value, then it is important that the string be
+** derived from the numeric value, not the other way around, to ensure
+** that the index and table are consistent. See ticket
+** https://www.sqlite.org/src/info/343634942dd54ab (2018-01-31) for
+** an example.
+**
+** This routine looks at pMem to verify that if it has both a numeric
+** representation and a string representation then the string rep has
+** been derived from the numeric and not the other way around. It returns
+** true if everything is ok and false if there is a problem.
+**
+** This routine is for use inside of assert() statements only.
+*/
+SQLITE_PRIVATE int sqlite3VdbeMemConsistentDualRep(Mem *p){
+ char zBuf[100];
+ char *z;
+ int i, j, incr;
+ if( (p->flags & MEM_Str)==0 ) return 1;
+ if( (p->flags & (MEM_Int|MEM_Real))==0 ) return 1;
+ if( p->flags & MEM_Int ){
+ sqlite3_snprintf(sizeof(zBuf),zBuf,"%lld",p->u.i);
+ }else{
+ sqlite3_snprintf(sizeof(zBuf),zBuf,"%!.15g",p->u.r);
+ }
+ z = p->z;
+ i = j = 0;
+ incr = 1;
+ if( p->enc!=SQLITE_UTF8 ){
+ incr = 2;
+ if( p->enc==SQLITE_UTF16BE ) z++;
+ }
+ while( zBuf[j] ){
+ if( zBuf[j++]!=z[i] ) return 0;
+ i += incr;
+ }
+ return 1;
+}
+#endif /* SQLITE_DEBUG */
/*
** If pMem is an object with a valid string representation, this routine
SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemGrow(Mem *pMem, int n, int bPreserve){
assert( sqlite3VdbeCheckMemInvariants(pMem) );
assert( (pMem->flags&MEM_RowSet)==0 );
+ testcase( pMem->db==0 );
/* If the bPreserve flag is set to true, then the memory cell must already
** contain a valid string or blob value. */
assert( pMem->szMalloc==0
|| pMem->szMalloc==sqlite3DbMallocSize(pMem->db, pMem->zMalloc) );
- if( pMem->szMalloc<n ){
- if( n<32 ) n = 32;
- if( bPreserve && pMem->szMalloc>0 && pMem->z==pMem->zMalloc ){
- pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n);
- bPreserve = 0;
- }else{
- if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc);
- pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n);
- }
- if( pMem->zMalloc==0 ){
- sqlite3VdbeMemSetNull(pMem);
- pMem->z = 0;
- pMem->szMalloc = 0;
- return SQLITE_NOMEM;
- }else{
- pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc);
- }
+ if( n<32 ) n = 32;
+ if( pMem->szMalloc>0 && bPreserve && pMem->z==pMem->zMalloc ){
+ pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n);
+ bPreserve = 0;
+ }else{
+ if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc);
+ pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n);
+ }
+ if( pMem->zMalloc==0 ){
+ sqlite3VdbeMemSetNull(pMem);
+ pMem->z = 0;
+ pMem->szMalloc = 0;
+ return SQLITE_NOMEM_BKPT;
+ }else{
+ pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc);
}
- if( bPreserve && pMem->z && pMem->z!=pMem->zMalloc ){
+ if( bPreserve && pMem->z ){
+ assert( pMem->z!=pMem->zMalloc );
memcpy(pMem->zMalloc, pMem->z, pMem->n);
}
if( (pMem->flags&MEM_Dyn)!=0 ){
return SQLITE_OK;
}
+/*
+** It is already known that pMem contains an unterminated string.
+** Add the zero terminator.
+*/
+static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){
+ if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){
+ return SQLITE_NOMEM_BKPT;
+ }
+ pMem->z[pMem->n] = 0;
+ pMem->z[pMem->n+1] = 0;
+ pMem->flags |= MEM_Term;
+ return SQLITE_OK;
+}
+
/*
** Change pMem so that its MEM_Str or MEM_Blob value is stored in
** MEM.zMalloc, where it can be safely written.
** Return SQLITE_OK on success or SQLITE_NOMEM if malloc fails.
*/
SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem *pMem){
- int f;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
assert( (pMem->flags&MEM_RowSet)==0 );
- ExpandBlob(pMem);
- f = pMem->flags;
- if( (f&(MEM_Str|MEM_Blob)) && (pMem->szMalloc==0 || pMem->z!=pMem->zMalloc) ){
- if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){
- return SQLITE_NOMEM;
+ if( (pMem->flags & (MEM_Str|MEM_Blob))!=0 ){
+ if( ExpandBlob(pMem) ) return SQLITE_NOMEM;
+ if( pMem->szMalloc==0 || pMem->z!=pMem->zMalloc ){
+ int rc = vdbeMemAddTerminator(pMem);
+ if( rc ) return rc;
}
- pMem->z[pMem->n] = 0;
- pMem->z[pMem->n+1] = 0;
- pMem->flags |= MEM_Term;
}
pMem->flags &= ~MEM_Ephem;
#ifdef SQLITE_DEBUG
*/
#ifndef SQLITE_OMIT_INCRBLOB
SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *pMem){
- if( pMem->flags & MEM_Zero ){
- int nByte;
- assert( pMem->flags&MEM_Blob );
- assert( (pMem->flags&MEM_RowSet)==0 );
- assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
-
- /* Set nByte to the number of bytes required to store the expanded blob. */
- nByte = pMem->n + pMem->u.nZero;
- if( nByte<=0 ){
- nByte = 1;
- }
- if( sqlite3VdbeMemGrow(pMem, nByte, 1) ){
- return SQLITE_NOMEM;
- }
+ int nByte;
+ assert( pMem->flags & MEM_Zero );
+ assert( pMem->flags&MEM_Blob );
+ assert( (pMem->flags&MEM_RowSet)==0 );
+ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
- memset(&pMem->z[pMem->n], 0, pMem->u.nZero);
- pMem->n += pMem->u.nZero;
- pMem->flags &= ~(MEM_Zero|MEM_Term);
+ /* Set nByte to the number of bytes required to store the expanded blob. */
+ nByte = pMem->n + pMem->u.nZero;
+ if( nByte<=0 ){
+ nByte = 1;
}
- return SQLITE_OK;
-}
-#endif
-
-/*
-** It is already known that pMem contains an unterminated string.
-** Add the zero terminator.
-*/
-static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){
- if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){
- return SQLITE_NOMEM;
+ if( sqlite3VdbeMemGrow(pMem, nByte, 1) ){
+ return SQLITE_NOMEM_BKPT;
}
- pMem->z[pMem->n] = 0;
- pMem->z[pMem->n+1] = 0;
- pMem->flags |= MEM_Term;
+
+ memset(&pMem->z[pMem->n], 0, pMem->u.nZero);
+ pMem->n += pMem->u.nZero;
+ pMem->flags &= ~(MEM_Zero|MEM_Term);
return SQLITE_OK;
}
+#endif
/*
** Make sure the given Mem is \u0000 terminated.
if( sqlite3VdbeMemClearAndResize(pMem, nByte) ){
- return SQLITE_NOMEM;
+ pMem->enc = 0;
+ return SQLITE_NOMEM_BKPT;
}
/* For a Real or Integer, use sqlite3_snprintf() to produce the UTF-8
** otherwise.
*/
SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem *pMem, FuncDef *pFunc){
- int rc = SQLITE_OK;
- if( ALWAYS(pFunc && pFunc->xFinalize) ){
- sqlite3_context ctx;
- Mem t;
- assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef );
- assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
- memset(&ctx, 0, sizeof(ctx));
- memset(&t, 0, sizeof(t));
- t.flags = MEM_Null;
- t.db = pMem->db;
- ctx.pOut = &t;
- ctx.pMem = pMem;
- ctx.pFunc = pFunc;
- pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */
- assert( (pMem->flags & MEM_Dyn)==0 );
- if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc);
- memcpy(pMem, &t, sizeof(t));
- rc = ctx.isError;
- }
- return rc;
+ sqlite3_context ctx;
+ Mem t;
+ assert( pFunc!=0 );
+ assert( pFunc->xFinalize!=0 );
+ assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef );
+ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
+ memset(&ctx, 0, sizeof(ctx));
+ memset(&t, 0, sizeof(t));
+ t.flags = MEM_Null;
+ t.db = pMem->db;
+ ctx.pOut = &t;
+ ctx.pMem = pMem;
+ ctx.pFunc = pFunc;
+ pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */
+ assert( (pMem->flags & MEM_Dyn)==0 );
+ if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc);
+ memcpy(pMem, &t, sizeof(t));
+ return ctx.isError;
}
/*
vdbeMemClearExternAndSetNull(p);
}
if( p->szMalloc ){
- sqlite3DbFree(p->db, p->zMalloc);
+ sqlite3DbFreeNN(p->db, p->zMalloc);
p->szMalloc = 0;
}
p->z = 0;
** If the double is out of range of a 64-bit signed integer then
** return the closest available 64-bit signed integer.
*/
-static i64 doubleToInt64(double r){
+static SQLITE_NOINLINE i64 doubleToInt64(double r){
#ifdef SQLITE_OMIT_FLOATING_POINT
/* When floating-point is omitted, double and int64 are the same thing */
return r;
**
** If pMem represents a string value, its encoding might be changed.
*/
+static SQLITE_NOINLINE i64 memIntValue(Mem *pMem){
+ i64 value = 0;
+ sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc);
+ return value;
+}
SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem *pMem){
int flags;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
}else if( flags & MEM_Real ){
return doubleToInt64(pMem->u.r);
}else if( flags & (MEM_Str|MEM_Blob) ){
- i64 value = 0;
assert( pMem->z || pMem->n==0 );
- sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc);
- return value;
+ return memIntValue(pMem);
}else{
return 0;
}
** value. If it is a string or blob, try to convert it to a double.
** If it is a NULL, return 0.0.
*/
+static SQLITE_NOINLINE double memRealValue(Mem *pMem){
+ /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
+ double val = (double)0;
+ sqlite3AtoF(pMem->z, &val, pMem->n, pMem->enc);
+ return val;
+}
SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem *pMem){
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
assert( EIGHT_BYTE_ALIGNMENT(pMem) );
}else if( pMem->flags & MEM_Int ){
return (double)pMem->u.i;
}else if( pMem->flags & (MEM_Str|MEM_Blob) ){
- /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
- double val = (double)0;
- sqlite3AtoF(pMem->z, &val, pMem->n, pMem->enc);
- return val;
+ return memRealValue(pMem);
}else{
/* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
return (double)0;
}
}
+/*
+** Return 1 if pMem represents true, and return 0 if pMem represents false.
+** Return the value ifNull if pMem is NULL.
+*/
+SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem *pMem, int ifNull){
+ if( pMem->flags & MEM_Int ) return pMem->u.i!=0;
+ if( pMem->flags & MEM_Null ) return ifNull;
+ return sqlite3VdbeRealValue(pMem)!=0.0;
+}
+
/*
** The MEM structure is already a MEM_Real. Try to also make it a
** MEM_Int if we can.
return SQLITE_OK;
}
+/* Compare a floating point value to an integer. Return true if the two
+** values are the same within the precision of the floating point value.
+**
+** For some versions of GCC on 32-bit machines, if you do the more obvious
+** comparison of "r1==(double)i" you sometimes get an answer of false even
+** though the r1 and (double)i values are bit-for-bit the same.
+*/
+static int sqlite3RealSameAsInt(double r1, sqlite3_int64 i){
+ double r2 = (double)i;
+ return memcmp(&r1, &r2, sizeof(r1))==0;
+}
+
/*
** Convert pMem so that it has types MEM_Real or MEM_Int or both.
** Invalidate any prior representations.
*/
SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem *pMem){
if( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))==0 ){
+ int rc;
assert( (pMem->flags & (MEM_Blob|MEM_Str))!=0 );
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
- if( 0==sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc) ){
+ rc = sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc);
+ if( rc==0 ){
MemSetTypeFlag(pMem, MEM_Int);
}else{
- pMem->u.r = sqlite3VdbeRealValue(pMem);
- MemSetTypeFlag(pMem, MEM_Real);
- sqlite3VdbeIntegerAffinity(pMem);
+ i64 i = pMem->u.i;
+ sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc);
+ if( rc==1 && sqlite3RealSameAsInt(pMem->u.r, i) ){
+ pMem->u.i = i;
+ MemSetTypeFlag(pMem, MEM_Int);
+ }else{
+ MemSetTypeFlag(pMem, MEM_Real);
+ }
}
}
assert( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))!=0 );
- pMem->flags &= ~(MEM_Str|MEM_Blob);
+ pMem->flags &= ~(MEM_Str|MEM_Blob|MEM_Zero);
return SQLITE_OK;
}
if( (pMem->flags & MEM_Blob)==0 ){
sqlite3ValueApplyAffinity(pMem, SQLITE_AFF_TEXT, encoding);
assert( pMem->flags & MEM_Str || pMem->db->mallocFailed );
- MemSetTypeFlag(pMem, MEM_Blob);
+ if( pMem->flags & MEM_Str ) MemSetTypeFlag(pMem, MEM_Blob);
}else{
pMem->flags &= ~(MEM_TypeMask&~MEM_Blob);
}
}
}
+/* A no-op destructor */
+static void sqlite3NoopDestructor(void *p){ UNUSED_PARAMETER(p); }
+
+/*
+** Set the value stored in *pMem should already be a NULL.
+** Also store a pointer to go with it.
+*/
+SQLITE_PRIVATE void sqlite3VdbeMemSetPointer(
+ Mem *pMem,
+ void *pPtr,
+ const char *zPType,
+ void (*xDestructor)(void*)
+){
+ assert( pMem->flags==MEM_Null );
+ pMem->u.zPType = zPType ? zPType : "";
+ pMem->z = pPtr;
+ pMem->flags = MEM_Null|MEM_Dyn|MEM_Subtype|MEM_Term;
+ pMem->eSubtype = 'p';
+ pMem->xDel = xDestructor ? xDestructor : sqlite3NoopDestructor;
+}
+
#ifndef SQLITE_OMIT_FLOATING_POINT
/*
** Delete any previous value and set the value stored in *pMem to val,
assert( db!=0 );
assert( (pMem->flags & MEM_RowSet)==0 );
sqlite3VdbeMemRelease(pMem);
- pMem->zMalloc = sqlite3DbMallocRaw(db, 64);
+ pMem->zMalloc = sqlite3DbMallocRawNN(db, 64);
if( db->mallocFailed ){
pMem->flags = MEM_Null;
pMem->szMalloc = 0;
SQLITE_PRIVATE void sqlite3VdbeMemAboutToChange(Vdbe *pVdbe, Mem *pMem){
int i;
Mem *pX;
- for(i=1, pX=&pVdbe->aMem[1]; i<=pVdbe->nMem; i++, pX++){
+ for(i=0, pX=pVdbe->aMem; i<pVdbe->nMem; i++, pX++){
if( pX->pScopyFrom==pMem ){
pX->flags |= MEM_Undefined;
pX->pScopyFrom = 0;
SQLITE_PRIVATE int sqlite3VdbeMemCopy(Mem *pTo, const Mem *pFrom){
int rc = SQLITE_OK;
- /* The pFrom==0 case in the following assert() is when an sqlite3_value
- ** from sqlite3_value_dup() is used as the argument
- ** to sqlite3_result_value(). */
- assert( pTo->db==pFrom->db || pFrom->db==0 );
assert( (pFrom->flags & MEM_RowSet)==0 );
if( VdbeMemDynamic(pTo) ) vdbeMemClearExternAndSetNull(pTo);
memcpy(pTo, pFrom, MEMCELLSIZE);
if( nByte<0 ){
assert( enc!=0 );
if( enc==SQLITE_UTF8 ){
- nByte = sqlite3Strlen30(z);
+ nByte = 0x7fffffff & (int)strlen(z);
if( nByte>iLimit ) nByte = iLimit+1;
}else{
for(nByte=0; nByte<=iLimit && (z[nByte] | z[nByte+1]); nByte+=2){}
testcase( nAlloc==31 );
testcase( nAlloc==32 );
if( sqlite3VdbeMemClearAndResize(pMem, MAX(nAlloc,32)) ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memcpy(pMem->z, z, nAlloc);
}else if( xDel==SQLITE_DYNAMIC ){
#ifndef SQLITE_OMIT_UTF16
if( pMem->enc!=SQLITE_UTF8 && sqlite3VdbeMemHandleBom(pMem) ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
#endif
/*
** Move data out of a btree key or data field and into a Mem structure.
-** The data or key is taken from the entry that pCur is currently pointing
+** The data is payload from the entry that pCur is currently pointing
** to. offset and amt determine what portion of the data or key to retrieve.
-** key is true to get the key or false to get data. The result is written
-** into the pMem element.
+** The result is written into the pMem element.
**
** The pMem object must have been initialized. This routine will use
** pMem->zMalloc to hold the content from the btree, if possible. New
BtCursor *pCur, /* Cursor pointing at record to retrieve. */
u32 offset, /* Offset from the start of data to return bytes from. */
u32 amt, /* Number of bytes to return. */
- int key, /* If true, retrieve from the btree key, not data. */
Mem *pMem /* OUT: Return data in this Mem structure. */
){
int rc;
pMem->flags = MEM_Null;
- if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+2)) ){
- if( key ){
- rc = sqlite3BtreeKey(pCur, offset, amt, pMem->z);
- }else{
- rc = sqlite3BtreeData(pCur, offset, amt, pMem->z);
- }
+ if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+1)) ){
+ rc = sqlite3BtreePayload(pCur, offset, amt, pMem->z);
if( rc==SQLITE_OK ){
- pMem->z[amt] = 0;
- pMem->z[amt+1] = 0;
- pMem->flags = MEM_Blob|MEM_Term;
+ pMem->z[amt] = 0; /* Overrun area used when reading malformed records */
+ pMem->flags = MEM_Blob;
pMem->n = (int)amt;
}else{
sqlite3VdbeMemRelease(pMem);
BtCursor *pCur, /* Cursor pointing at record to retrieve. */
u32 offset, /* Offset from the start of data to return bytes from. */
u32 amt, /* Number of bytes to return. */
- int key, /* If true, retrieve from the btree key, not data. */
Mem *pMem /* OUT: Return data in this Mem structure. */
){
char *zData; /* Data from the btree layer */
/* Note: the calls to BtreeKeyFetch() and DataFetch() below assert()
** that both the BtShared and database handle mutexes are held. */
assert( (pMem->flags & MEM_RowSet)==0 );
- if( key ){
- zData = (char *)sqlite3BtreeKeyFetch(pCur, &available);
- }else{
- zData = (char *)sqlite3BtreeDataFetch(pCur, &available);
- }
+ zData = (char *)sqlite3BtreePayloadFetch(pCur, &available);
assert( zData!=0 );
if( offset+amt<=available ){
pMem->flags = MEM_Blob|MEM_Ephem;
pMem->n = (int)amt;
}else{
- rc = vdbeMemFromBtreeResize(pCur, offset, amt, key, pMem);
+ rc = vdbeMemFromBtreeResize(pCur, offset, amt, pMem);
}
return rc;
assert( (pVal->flags & MEM_RowSet)==0 );
assert( (pVal->flags & (MEM_Null))==0 );
if( pVal->flags & (MEM_Blob|MEM_Str) ){
+ if( ExpandBlob(pVal) ) return 0;
pVal->flags |= MEM_Str;
- if( pVal->flags & MEM_Zero ){
- sqlite3VdbeMemExpandBlob(pVal);
- }
if( pVal->enc != (enc & ~SQLITE_UTF16_ALIGNED) ){
sqlite3VdbeChangeEncoding(pVal, enc & ~SQLITE_UTF16_ALIGNED);
}
assert(pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) || pVal->db==0
|| pVal->db->mallocFailed );
if( pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) ){
+ assert( sqlite3VdbeMemConsistentDualRep(pVal) );
return pVal->z;
}else{
return 0;
assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) );
assert( (pVal->flags & MEM_RowSet)==0 );
if( (pVal->flags&(MEM_Str|MEM_Term))==(MEM_Str|MEM_Term) && pVal->enc==enc ){
+ assert( sqlite3VdbeMemConsistentDualRep(pVal) );
return pVal->z;
}
if( pVal->flags&MEM_Null ){
if( pRec ){
pRec->pKeyInfo = sqlite3KeyInfoOfIndex(p->pParse, pIdx);
if( pRec->pKeyInfo ){
- assert( pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField==nCol );
+ assert( pRec->pKeyInfo->nAllField==nCol );
assert( pRec->pKeyInfo->enc==ENC(db) );
pRec->aMem = (Mem *)((u8*)pRec + ROUND8(sizeof(UnpackedRecord)));
for(i=0; i<nCol; i++){
pRec->aMem[i].db = db;
}
}else{
- sqlite3DbFree(db, pRec);
+ sqlite3DbFreeNN(db, pRec);
pRec = 0;
}
}
FuncDef *pFunc = 0; /* Function definition */
sqlite3_value *pVal = 0; /* New value */
int rc = SQLITE_OK; /* Return code */
- int nName; /* Size of function name in bytes */
ExprList *pList = 0; /* Function arguments */
int i; /* Iterator variable */
assert( (p->flags & EP_TokenOnly)==0 );
pList = p->x.pList;
if( pList ) nVal = pList->nExpr;
- nName = sqlite3Strlen30(p->u.zToken);
- pFunc = sqlite3FindFunction(db, p->u.zToken, nName, nVal, enc, 0);
+ pFunc = sqlite3FindFunction(db, p->u.zToken, nVal, enc, 0);
assert( pFunc );
if( (pFunc->funcFlags & (SQLITE_FUNC_CONSTANT|SQLITE_FUNC_SLOCHNG))==0
|| (pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL)
if( pList ){
apVal = (sqlite3_value**)sqlite3DbMallocZero(db, sizeof(apVal[0]) * nVal);
if( apVal==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto value_from_function_out;
}
for(i=0; i<nVal; i++){
pVal = valueNew(db, pCtx);
if( pVal==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto value_from_function_out;
}
memset(&ctx, 0, sizeof(ctx));
ctx.pOut = pVal;
ctx.pFunc = pFunc;
- pFunc->xFunc(&ctx, nVal, apVal);
+ pFunc->xSFunc(&ctx, nVal, apVal);
if( ctx.isError ){
rc = ctx.isError;
sqlite3ErrorMsg(pCtx->pParse, "%s", sqlite3_value_text(pVal));
for(i=0; i<nVal; i++){
sqlite3ValueFree(apVal[i]);
}
- sqlite3DbFree(db, apVal);
+ sqlite3DbFreeNN(db, apVal);
}
*ppVal = pVal;
const char *zNeg = "";
int rc = SQLITE_OK;
- if( !pExpr ){
- *ppVal = 0;
- return SQLITE_OK;
- }
- while( (op = pExpr->op)==TK_UPLUS ) pExpr = pExpr->pLeft;
+ assert( pExpr!=0 );
+ while( (op = pExpr->op)==TK_UPLUS || op==TK_SPAN ) pExpr = pExpr->pLeft;
+#if defined(SQLITE_ENABLE_STAT3_OR_STAT4)
+ if( op==TK_REGISTER ) op = pExpr->op2;
+#else
if( NEVER(op==TK_REGISTER) ) op = pExpr->op2;
+#endif
/* Compressed expressions only appear when parsing the DEFAULT clause
** on a table column definition, and hence only when pCtx==0. This
}
}else if( op==TK_UMINUS ) {
/* This branch happens for multiple negative signs. Ex: -(-5) */
- if( SQLITE_OK==sqlite3ValueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal)
+ if( SQLITE_OK==valueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal,pCtx)
&& pVal!=0
){
sqlite3VdbeMemNumerify(pVal);
}else if( op==TK_NULL ){
pVal = valueNew(db, pCtx);
if( pVal==0 ) goto no_mem;
+ sqlite3VdbeMemNumerify(pVal);
}
#ifndef SQLITE_OMIT_BLOB_LITERAL
else if( op==TK_BLOB ){
return rc;
no_mem:
- db->mallocFailed = 1;
+#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
+ if( pCtx==0 || pCtx->pParse->nErr==0 )
+#endif
+ sqlite3OomFault(db);
sqlite3DbFree(db, zVal);
assert( *ppVal==0 );
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
#else
assert( pCtx==0 ); sqlite3ValueFree(pVal);
#endif
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/*
u8 affinity, /* Affinity to use */
sqlite3_value **ppVal /* Write the new value here */
){
- return valueFromExpr(db, pExpr, enc, affinity, ppVal, 0);
+ return pExpr ? valueFromExpr(db, pExpr, enc, affinity, ppVal, 0) : 0;
}
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
sqlite3_value **argv
){
const int file_format = 1;
- int iSerial; /* Serial type */
+ u32 iSerial; /* Serial type */
int nSerial; /* Bytes of space for iSerial as varint */
- int nVal; /* Bytes of space required for argv[0] */
+ u32 nVal; /* Bytes of space required for argv[0] */
int nRet;
sqlite3 *db;
u8 *aRet;
UNUSED_PARAMETER( argc );
- iSerial = sqlite3VdbeSerialType(argv[0], file_format);
+ iSerial = sqlite3VdbeSerialType(argv[0], file_format, &nVal);
nSerial = sqlite3VarintLen(iSerial);
- nVal = sqlite3VdbeSerialTypeLen(iSerial);
db = sqlite3_context_db_handle(context);
nRet = 1 + nSerial + nVal;
- aRet = sqlite3DbMallocRaw(db, nRet);
+ aRet = sqlite3DbMallocRawNN(db, nRet);
if( aRet==0 ){
sqlite3_result_error_nomem(context);
}else{
putVarint32(&aRet[1], iSerial);
sqlite3VdbeSerialPut(&aRet[1+nSerial], argv[0], iSerial);
sqlite3_result_blob(context, aRet, nRet, SQLITE_TRANSIENT);
- sqlite3DbFree(db, aRet);
+ sqlite3DbFreeNN(db, aRet);
}
}
** Register built-in functions used to help read ANALYZE data.
*/
SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void){
- static SQLITE_WSD FuncDef aAnalyzeTableFuncs[] = {
+ static FuncDef aAnalyzeTableFuncs[] = {
FUNCTION(sqlite_record, 1, 0, 0, recordFunc),
};
- int i;
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
- FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aAnalyzeTableFuncs);
- for(i=0; i<ArraySize(aAnalyzeTableFuncs); i++){
- sqlite3FuncDefInsert(pHash, &aFunc[i]);
- }
+ sqlite3InsertBuiltinFuncs(aAnalyzeTableFuncs, ArraySize(aAnalyzeTableFuncs));
}
/*
/* Skip over any TK_COLLATE nodes */
pExpr = sqlite3ExprSkipCollate(pExpr);
+ assert( pExpr==0 || pExpr->op!=TK_REGISTER || pExpr->op2!=TK_VARIABLE );
if( !pExpr ){
pVal = valueNew(db, pAlloc);
if( pVal ){
sqlite3VdbeMemSetNull((Mem*)pVal);
}
- }else if( pExpr->op==TK_VARIABLE
- || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE)
- ){
+ }else if( pExpr->op==TK_VARIABLE && (db->flags & SQLITE_EnableQPSG)==0 ){
Vdbe *v;
int iBindVar = pExpr->iColumn;
sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar);
pVal = valueNew(db, pAlloc);
if( pVal ){
rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]);
- if( rc==SQLITE_OK ){
- sqlite3ValueApplyAffinity(pVal, affinity, ENC(db));
- }
+ sqlite3ValueApplyAffinity(pVal, affinity, ENC(db));
pVal->db = pParse->db;
}
}
** structures intended to be compared against sample index keys stored
** in the sqlite_stat4 table.
**
-** A single call to this function attempts to populates field iVal (leftmost
-** is 0 etc.) of the unpacked record with a value extracted from expression
-** pExpr. Extraction of values is possible if:
+** A single call to this function populates zero or more fields of the
+** record starting with field iVal (fields are numbered from left to
+** right starting with 0). A single field is populated if:
**
** * (pExpr==0). In this case the value is assumed to be an SQL NULL,
**
** * The sqlite3ValueFromExpr() function is able to extract a value
** from the expression (i.e. the expression is a literal value).
**
-** If a value can be extracted, the affinity passed as the 5th argument
-** is applied to it before it is copied into the UnpackedRecord. Output
-** parameter *pbOk is set to true if a value is extracted, or false
-** otherwise.
+** Or, if pExpr is a TK_VECTOR, one field is populated for each of the
+** vector components that match either of the two latter criteria listed
+** above.
+**
+** Before any value is appended to the record, the affinity of the
+** corresponding column within index pIdx is applied to it. Before
+** this function returns, output parameter *pnExtract is set to the
+** number of values appended to the record.
**
** When this function is called, *ppRec must either point to an object
** allocated by an earlier call to this function, or must be NULL. If it
Index *pIdx, /* Index being probed */
UnpackedRecord **ppRec, /* IN/OUT: Probe record */
Expr *pExpr, /* The expression to extract a value from */
- u8 affinity, /* Affinity to use */
+ int nElem, /* Maximum number of values to append */
int iVal, /* Array element to populate */
- int *pbOk /* OUT: True if value was extracted */
+ int *pnExtract /* OUT: Values appended to the record */
){
- int rc;
- sqlite3_value *pVal = 0;
- struct ValueNewStat4Ctx alloc;
+ int rc = SQLITE_OK;
+ int nExtract = 0;
- alloc.pParse = pParse;
- alloc.pIdx = pIdx;
- alloc.ppRec = ppRec;
- alloc.iVal = iVal;
+ if( pExpr==0 || pExpr->op!=TK_SELECT ){
+ int i;
+ struct ValueNewStat4Ctx alloc;
+
+ alloc.pParse = pParse;
+ alloc.pIdx = pIdx;
+ alloc.ppRec = ppRec;
- rc = stat4ValueFromExpr(pParse, pExpr, affinity, &alloc, &pVal);
- assert( pVal==0 || pVal->db==pParse->db );
- *pbOk = (pVal!=0);
+ for(i=0; i<nElem; i++){
+ sqlite3_value *pVal = 0;
+ Expr *pElem = (pExpr ? sqlite3VectorFieldSubexpr(pExpr, i) : 0);
+ u8 aff = sqlite3IndexColumnAffinity(pParse->db, pIdx, iVal+i);
+ alloc.iVal = iVal+i;
+ rc = stat4ValueFromExpr(pParse, pElem, aff, &alloc, &pVal);
+ if( !pVal ) break;
+ nExtract++;
+ }
+ }
+
+ *pnExtract = nExtract;
return rc;
}
if( iField>nRec ) return SQLITE_CORRUPT_BKPT;
if( pMem==0 ){
pMem = *ppVal = sqlite3ValueNew(db);
- if( pMem==0 ) return SQLITE_NOMEM;
+ if( pMem==0 ) return SQLITE_NOMEM_BKPT;
}
sqlite3VdbeSerialGet(&a[iField-szField], t, pMem);
pMem->enc = ENC(db);
SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord *pRec){
if( pRec ){
int i;
- int nCol = pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField;
+ int nCol = pRec->pKeyInfo->nAllField;
Mem *aMem = pRec->aMem;
sqlite3 *db = aMem[0].db;
for(i=0; i<nCol; i++){
sqlite3VdbeMemRelease(&aMem[i]);
}
sqlite3KeyInfoUnref(pRec->pKeyInfo);
- sqlite3DbFree(db, pRec);
+ sqlite3DbFreeNN(db, pRec);
}
}
#endif /* ifdef SQLITE_ENABLE_STAT4 */
SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value *v){
if( !v ) return;
sqlite3VdbeMemRelease((Mem *)v);
- sqlite3DbFree(((Mem*)v)->db, v);
+ sqlite3DbFreeNN(((Mem*)v)->db, v);
}
/*
SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse *pParse){
sqlite3 *db = pParse->db;
Vdbe *p;
- p = sqlite3DbMallocZero(db, sizeof(Vdbe) );
+ p = sqlite3DbMallocRawNN(db, sizeof(Vdbe) );
if( p==0 ) return 0;
+ memset(&p->aOp, 0, sizeof(Vdbe)-offsetof(Vdbe,aOp));
p->db = db;
if( db->pVdbe ){
db->pVdbe->pPrev = p;
db->pVdbe = p;
p->magic = VDBE_MAGIC_INIT;
p->pParse = pParse;
+ pParse->pVdbe = p;
assert( pParse->aLabel==0 );
assert( pParse->nLabel==0 );
assert( pParse->nOpAlloc==0 );
+ assert( pParse->szOpAlloc==0 );
+ sqlite3VdbeAddOp2(p, OP_Init, 0, 1);
return p;
}
/*
** Remember the SQL string for a prepared statement.
*/
-SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, int isPrepareV2){
- assert( isPrepareV2==1 || isPrepareV2==0 );
+SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, u8 prepFlags){
if( p==0 ) return;
-#if defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_ENABLE_SQLLOG)
- if( !isPrepareV2 ) return;
-#endif
+ p->prepFlags = prepFlags;
+ if( (prepFlags & SQLITE_PREPARE_SAVESQL)==0 ){
+ p->expmask = 0;
+ }
assert( p->zSql==0 );
p->zSql = sqlite3DbStrNDup(p->db, z, n);
- p->isPrepareV2 = (u8)isPrepareV2;
-}
-
-/*
-** Return the SQL associated with a prepared statement
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt){
- Vdbe *p = (Vdbe *)pStmt;
- return p ? p->zSql : 0;
}
/*
SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){
Vdbe tmp, *pTmp;
char *zTmp;
+ assert( pA->db==pB->db );
tmp = *pA;
*pA = *pB;
*pB = tmp;
zTmp = pA->zSql;
pA->zSql = pB->zSql;
pB->zSql = zTmp;
- pB->isPrepareV2 = pA->isPrepareV2;
+ pB->expmask = pA->expmask;
+ pB->prepFlags = pA->prepFlags;
+ memcpy(pB->aCounter, pA->aCounter, sizeof(pB->aCounter));
+ pB->aCounter[SQLITE_STMTSTATUS_REPREPARE]++;
}
/*
UNUSED_PARAMETER(nOp);
#endif
+ /* Ensure that the size of a VDBE does not grow too large */
+ if( nNew > p->db->aLimit[SQLITE_LIMIT_VDBE_OP] ){
+ sqlite3OomFault(p->db);
+ return SQLITE_NOMEM;
+ }
+
assert( nOp<=(1024/sizeof(Op)) );
assert( nNew>=(p->nOpAlloc+nOp) );
pNew = sqlite3DbRealloc(p->db, v->aOp, nNew*sizeof(Op));
if( pNew ){
- p->nOpAlloc = sqlite3DbMallocSize(p->db, pNew)/sizeof(Op);
+ p->szOpAlloc = sqlite3DbMallocSize(p->db, pNew);
+ p->nOpAlloc = p->szOpAlloc/sizeof(Op);
v->aOp = pNew;
}
- return (pNew ? SQLITE_OK : SQLITE_NOMEM);
+ return (pNew ? SQLITE_OK : SQLITE_NOMEM_BKPT);
}
#ifdef SQLITE_DEBUG
** the sqlite3VdbeChangeP4() function to change the value of the P4
** operand.
*/
+static SQLITE_NOINLINE int growOp3(Vdbe *p, int op, int p1, int p2, int p3){
+ assert( p->pParse->nOpAlloc<=p->nOp );
+ if( growOpArray(p, 1) ) return 1;
+ assert( p->pParse->nOpAlloc>p->nOp );
+ return sqlite3VdbeAddOp3(p, op, p1, p2, p3);
+}
SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe *p, int op, int p1, int p2, int p3){
int i;
VdbeOp *pOp;
i = p->nOp;
assert( p->magic==VDBE_MAGIC_INIT );
- assert( op>0 && op<0xff );
+ assert( op>=0 && op<0xff );
if( p->pParse->nOpAlloc<=i ){
- if( growOpArray(p, 1) ){
- return 1;
- }
+ return growOp3(p, op, p1, p2, p3);
}
p->nOp++;
pOp = &p->aOp[i];
if( p->db->flags & SQLITE_VdbeAddopTrace ){
int jj, kk;
Parse *pParse = p->pParse;
- for(jj=kk=0; jj<SQLITE_N_COLCACHE; jj++){
+ for(jj=kk=0; jj<pParse->nColCache; jj++){
struct yColCache *x = pParse->aColCache + jj;
- if( x->iLevel>pParse->iCacheLevel || x->iReg==0 ) continue;
printf(" r[%d]={%d:%d}", x->iReg, x->iTable, x->iColumn);
kk++;
}
** "s" character in zTypes[], the register is a string if the argument is
** not NULL, or OP_Null if the value is a null pointer. For each "i" character
** in zTypes[], the register is initialized to an integer.
+**
+** If the input string does not end with "X" then an OP_ResultRow instruction
+** is generated for the values inserted.
*/
SQLITE_PRIVATE void sqlite3VdbeMultiLoad(Vdbe *p, int iDest, const char *zTypes, ...){
va_list ap;
for(i=0; (c = zTypes[i])!=0; i++){
if( c=='s' ){
const char *z = va_arg(ap, const char*);
- int addr = sqlite3VdbeAddOp2(p, z==0 ? OP_Null : OP_String8, 0, iDest++);
- if( z ) sqlite3VdbeChangeP4(p, addr, z, 0);
+ sqlite3VdbeAddOp4(p, z==0 ? OP_Null : OP_String8, 0, iDest+i, 0, z, 0);
+ }else if( c=='i' ){
+ sqlite3VdbeAddOp2(p, OP_Integer, va_arg(ap, int), iDest+i);
}else{
- assert( c=='i' );
- sqlite3VdbeAddOp2(p, OP_Integer, va_arg(ap, int), iDest++);
+ goto skip_op_resultrow;
}
}
+ sqlite3VdbeAddOp2(p, OP_ResultRow, iDest, i);
+skip_op_resultrow:
va_end(ap);
}
const u8 *zP4, /* The P4 operand */
int p4type /* P4 operand type */
){
- char *p4copy = sqlite3DbMallocRaw(sqlite3VdbeDb(p), 8);
+ char *p4copy = sqlite3DbMallocRawNN(sqlite3VdbeDb(p), 8);
if( p4copy ) memcpy(p4copy, zP4, 8);
return sqlite3VdbeAddOp4(p, op, p1, p2, p3, p4copy, p4type);
}
*/
SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe *p, int iDb, char *zWhere){
int j;
- int addr = sqlite3VdbeAddOp3(p, OP_ParseSchema, iDb, 0, 0);
- sqlite3VdbeChangeP4(p, addr, zWhere, P4_DYNAMIC);
+ sqlite3VdbeAddOp4(p, OP_ParseSchema, iDb, 0, 0, zWhere, P4_DYNAMIC);
for(j=0; j<p->db->nDb; j++) sqlite3VdbeUsesBtree(p, j);
}
int p4 /* The P4 operand as an integer */
){
int addr = sqlite3VdbeAddOp3(p, op, p1, p2, p3);
- sqlite3VdbeChangeP4(p, addr, SQLITE_INT_TO_PTR(p4), P4_INT32);
+ if( p->db->mallocFailed==0 ){
+ VdbeOp *pOp = &p->aOp[addr];
+ pOp->p4type = P4_INT32;
+ pOp->p4.i = p4;
+ }
return addr;
}
+/* Insert the end of a co-routine
+*/
+SQLITE_PRIVATE void sqlite3VdbeEndCoroutine(Vdbe *v, int regYield){
+ sqlite3VdbeAddOp1(v, OP_EndCoroutine, regYield);
+
+ /* Clear the temporary register cache, thereby ensuring that each
+ ** co-routine has its own independent set of registers, because co-routines
+ ** might expect their registers to be preserved across an OP_Yield, and
+ ** that could cause problems if two or more co-routines are using the same
+ ** temporary register.
+ */
+ v->pParse->nTempReg = 0;
+ v->pParse->nRangeReg = 0;
+}
+
/*
** Create a new symbolic label for an instruction that has yet to be
** coded. The symbolic label is really just a negative number. The
if( p->aLabel ){
p->aLabel[i] = -1;
}
- return -1-i;
+ return ADDR(i);
}
/*
*/
SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe *v, int x){
Parse *p = v->pParse;
- int j = -1-x;
+ int j = ADDR(x);
assert( v->magic==VDBE_MAGIC_INIT );
assert( j<p->nLabel );
assert( j>=0 );
if( p->aLabel ){
p->aLabel[j] = v->nOp;
}
- p->iFixedOp = v->nOp - 1;
}
/*
p->runOnlyOnce = 1;
}
+/*
+** Mark the VDBE as one that can only be run multiple times.
+*/
+SQLITE_PRIVATE void sqlite3VdbeReusable(Vdbe *p){
+ p->runOnlyOnce = 0;
+}
+
#ifdef SQLITE_DEBUG /* sqlite3AssertMayAbort() logic */
/*
** * OP_VUpdate
** * OP_VRename
** * OP_FkCounter with P2==0 (immediate foreign key constraint)
-** * OP_CreateTable and OP_InitCoroutine (for CREATE TABLE AS SELECT ...)
+** * OP_CreateBtree/BTREE_INTKEY and OP_InitCoroutine
+** (for CREATE TABLE AS SELECT ...)
**
** Then check that the value of Parse.mayAbort is true if an
** ABORT may be thrown, or false otherwise. Return true if it does
hasAbort = 1;
break;
}
- if( opcode==OP_CreateTable ) hasCreateTable = 1;
+ if( opcode==OP_CreateBtree && pOp->p3==BTREE_INTKEY ) hasCreateTable = 1;
if( opcode==OP_InitCoroutine ) hasInitCoroutine = 1;
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( opcode==OP_FkCounter && pOp->p1==0 && pOp->p2==1 ){
** (4) Initialize the p4.xAdvance pointer on opcodes that use it.
**
** (5) Reclaim the memory allocated for storing labels.
+**
+** This routine will only function correctly if the mkopcodeh.tcl generator
+** script numbers the opcodes correctly. Changes to this routine must be
+** coordinated with changes to mkopcodeh.tcl.
*/
static void resolveP2Values(Vdbe *p, int *pMaxFuncArgs){
- int i;
int nMaxArgs = *pMaxFuncArgs;
Op *pOp;
Parse *pParse = p->pParse;
int *aLabel = pParse->aLabel;
p->readOnly = 1;
p->bIsReader = 0;
- for(pOp=p->aOp, i=p->nOp-1; i>=0; i--, pOp++){
- u8 opcode = pOp->opcode;
-
- /* NOTE: Be sure to update mkopcodeh.awk when adding or removing
- ** cases from this switch! */
- switch( opcode ){
- case OP_Transaction: {
- if( pOp->p2!=0 ) p->readOnly = 0;
- /* fall thru */
- }
- case OP_AutoCommit:
- case OP_Savepoint: {
- p->bIsReader = 1;
- break;
- }
+ pOp = &p->aOp[p->nOp-1];
+ while(1){
+
+ /* Only JUMP opcodes and the short list of special opcodes in the switch
+ ** below need to be considered. The mkopcodeh.tcl generator script groups
+ ** all these opcodes together near the front of the opcode list. Skip
+ ** any opcode that does not need processing by virtual of the fact that
+ ** it is larger than SQLITE_MX_JUMP_OPCODE, as a performance optimization.
+ */
+ if( pOp->opcode<=SQLITE_MX_JUMP_OPCODE ){
+ /* NOTE: Be sure to update mkopcodeh.tcl when adding or removing
+ ** cases from this switch! */
+ switch( pOp->opcode ){
+ case OP_Transaction: {
+ if( pOp->p2!=0 ) p->readOnly = 0;
+ /* fall thru */
+ }
+ case OP_AutoCommit:
+ case OP_Savepoint: {
+ p->bIsReader = 1;
+ break;
+ }
#ifndef SQLITE_OMIT_WAL
- case OP_Checkpoint:
+ case OP_Checkpoint:
#endif
- case OP_Vacuum:
- case OP_JournalMode: {
- p->readOnly = 0;
- p->bIsReader = 1;
- break;
- }
+ case OP_Vacuum:
+ case OP_JournalMode: {
+ p->readOnly = 0;
+ p->bIsReader = 1;
+ break;
+ }
+ case OP_Next:
+ case OP_NextIfOpen:
+ case OP_SorterNext: {
+ pOp->p4.xAdvance = sqlite3BtreeNext;
+ pOp->p4type = P4_ADVANCE;
+ /* The code generator never codes any of these opcodes as a jump
+ ** to a label. They are always coded as a jump backwards to a
+ ** known address */
+ assert( pOp->p2>=0 );
+ break;
+ }
+ case OP_Prev:
+ case OP_PrevIfOpen: {
+ pOp->p4.xAdvance = sqlite3BtreePrevious;
+ pOp->p4type = P4_ADVANCE;
+ /* The code generator never codes any of these opcodes as a jump
+ ** to a label. They are always coded as a jump backwards to a
+ ** known address */
+ assert( pOp->p2>=0 );
+ break;
+ }
#ifndef SQLITE_OMIT_VIRTUALTABLE
- case OP_VUpdate: {
- if( pOp->p2>nMaxArgs ) nMaxArgs = pOp->p2;
- break;
- }
- case OP_VFilter: {
- int n;
- assert( p->nOp - i >= 3 );
- assert( pOp[-1].opcode==OP_Integer );
- n = pOp[-1].p1;
- if( n>nMaxArgs ) nMaxArgs = n;
- break;
- }
-#endif
- case OP_Next:
- case OP_NextIfOpen:
- case OP_SorterNext: {
- pOp->p4.xAdvance = sqlite3BtreeNext;
- pOp->p4type = P4_ADVANCE;
- break;
- }
- case OP_Prev:
- case OP_PrevIfOpen: {
- pOp->p4.xAdvance = sqlite3BtreePrevious;
- pOp->p4type = P4_ADVANCE;
- break;
+ case OP_VUpdate: {
+ if( pOp->p2>nMaxArgs ) nMaxArgs = pOp->p2;
+ break;
+ }
+ case OP_VFilter: {
+ int n;
+ assert( (pOp - p->aOp) >= 3 );
+ assert( pOp[-1].opcode==OP_Integer );
+ n = pOp[-1].p1;
+ if( n>nMaxArgs ) nMaxArgs = n;
+ /* Fall through into the default case */
+ }
+#endif
+ default: {
+ if( pOp->p2<0 ){
+ /* The mkopcodeh.tcl script has so arranged things that the only
+ ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to
+ ** have non-negative values for P2. */
+ assert( (sqlite3OpcodeProperty[pOp->opcode] & OPFLG_JUMP)!=0 );
+ assert( ADDR(pOp->p2)<pParse->nLabel );
+ pOp->p2 = aLabel[ADDR(pOp->p2)];
+ }
+ break;
+ }
}
+ /* The mkopcodeh.tcl script has so arranged things that the only
+ ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to
+ ** have non-negative values for P2. */
+ assert( (sqlite3OpcodeProperty[pOp->opcode]&OPFLG_JUMP)==0 || pOp->p2>=0);
}
-
- pOp->opflags = sqlite3OpcodeProperty[opcode];
- if( (pOp->opflags & OPFLG_JUMP)!=0 && pOp->p2<0 ){
- assert( -1-pOp->p2<pParse->nLabel );
- pOp->p2 = aLabel[-1-pOp->p2];
- }
+ if( pOp==p->aOp ) break;
+ pOp--;
}
sqlite3DbFree(p->db, pParse->aLabel);
pParse->aLabel = 0;
return p->nOp;
}
+/*
+** Verify that at least N opcode slots are available in p without
+** having to malloc for more space (except when compiled using
+** SQLITE_TEST_REALLOC_STRESS). This interface is used during testing
+** to verify that certain calls to sqlite3VdbeAddOpList() can never
+** fail due to a OOM fault and hence that the return value from
+** sqlite3VdbeAddOpList() will always be non-NULL.
+*/
+#if defined(SQLITE_DEBUG) && !defined(SQLITE_TEST_REALLOC_STRESS)
+SQLITE_PRIVATE void sqlite3VdbeVerifyNoMallocRequired(Vdbe *p, int N){
+ assert( p->nOp + N <= p->pParse->nOpAlloc );
+}
+#endif
+
+/*
+** Verify that the VM passed as the only argument does not contain
+** an OP_ResultRow opcode. Fail an assert() if it does. This is used
+** by code in pragma.c to ensure that the implementation of certain
+** pragmas comports with the flags specified in the mkpragmatab.tcl
+** script.
+*/
+#if defined(SQLITE_DEBUG) && !defined(SQLITE_TEST_REALLOC_STRESS)
+SQLITE_PRIVATE void sqlite3VdbeVerifyNoResultRow(Vdbe *p){
+ int i;
+ for(i=0; i<p->nOp; i++){
+ assert( p->aOp[i].opcode!=OP_ResultRow );
+ }
+}
+#endif
+
/*
** This function returns a pointer to the array of opcodes associated with
** the Vdbe passed as the first argument. It is the callers responsibility
}
/*
-** Add a whole list of operations to the operation stack. Return the
-** address of the first operation added.
+** Add a whole list of operations to the operation stack. Return a
+** pointer to the first operation inserted.
+**
+** Non-zero P2 arguments to jump instructions are automatically adjusted
+** so that the jump target is relative to the first operation inserted.
*/
-SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe *p, int nOp, VdbeOpList const *aOp, int iLineno){
- int addr, i;
- VdbeOp *pOut;
+SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(
+ Vdbe *p, /* Add opcodes to the prepared statement */
+ int nOp, /* Number of opcodes to add */
+ VdbeOpList const *aOp, /* The opcodes to be added */
+ int iLineno /* Source-file line number of first opcode */
+){
+ int i;
+ VdbeOp *pOut, *pFirst;
assert( nOp>0 );
assert( p->magic==VDBE_MAGIC_INIT );
if( p->nOp + nOp > p->pParse->nOpAlloc && growOpArray(p, nOp) ){
return 0;
}
- addr = p->nOp;
- pOut = &p->aOp[addr];
+ pFirst = pOut = &p->aOp[p->nOp];
for(i=0; i<nOp; i++, aOp++, pOut++){
- int p2 = aOp->p2;
pOut->opcode = aOp->opcode;
pOut->p1 = aOp->p1;
- if( p2<0 ){
- assert( sqlite3OpcodeProperty[pOut->opcode] & OPFLG_JUMP );
- pOut->p2 = addr + ADDR(p2);
- }else{
- pOut->p2 = p2;
+ pOut->p2 = aOp->p2;
+ assert( aOp->p2>=0 );
+ if( (sqlite3OpcodeProperty[aOp->opcode] & OPFLG_JUMP)!=0 && aOp->p2>0 ){
+ pOut->p2 += p->nOp;
}
pOut->p3 = aOp->p3;
pOut->p4type = P4_NOTUSED;
#endif
#ifdef SQLITE_DEBUG
if( p->db->flags & SQLITE_VdbeAddopTrace ){
- sqlite3VdbePrintOp(0, i+addr, &p->aOp[i+addr]);
+ sqlite3VdbePrintOp(0, i+p->nOp, &p->aOp[i+p->nOp]);
}
#endif
}
p->nOp += nOp;
- return addr;
+ return pFirst;
}
#if defined(SQLITE_ENABLE_STMT_SCANSTATUS)
SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe *p, u32 addr, int val){
sqlite3VdbeGetOp(p,addr)->p3 = val;
}
-SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe *p, u8 p5){
- sqlite3VdbeGetOp(p,-1)->p5 = p5;
+SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe *p, u16 p5){
+ assert( p->nOp>0 || p->db->mallocFailed );
+ if( p->nOp>0 ) p->aOp[p->nOp-1].p5 = p5;
}
/*
** the address of the next instruction to be coded.
*/
SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe *p, int addr){
- p->pParse->iFixedOp = p->nOp - 1;
sqlite3VdbeChangeP2(p, addr, p->nOp);
}
** the FuncDef is not ephermal, then do nothing.
*/
static void freeEphemeralFunction(sqlite3 *db, FuncDef *pDef){
- if( ALWAYS(pDef) && (pDef->funcFlags & SQLITE_FUNC_EPHEM)!=0 ){
- sqlite3DbFree(db, pDef);
+ if( (pDef->funcFlags & SQLITE_FUNC_EPHEM)!=0 ){
+ sqlite3DbFreeNN(db, pDef);
}
}
/*
** Delete a P4 value if necessary.
*/
+static SQLITE_NOINLINE void freeP4Mem(sqlite3 *db, Mem *p){
+ if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc);
+ sqlite3DbFreeNN(db, p);
+}
+static SQLITE_NOINLINE void freeP4FuncCtx(sqlite3 *db, sqlite3_context *p){
+ freeEphemeralFunction(db, p->pFunc);
+ sqlite3DbFreeNN(db, p);
+}
static void freeP4(sqlite3 *db, int p4type, void *p4){
- if( p4 ){
- assert( db );
- switch( p4type ){
- case P4_FUNCCTX: {
- freeEphemeralFunction(db, ((sqlite3_context*)p4)->pFunc);
- /* Fall through into the next case */
- }
- case P4_REAL:
- case P4_INT64:
- case P4_DYNAMIC:
- case P4_INTARRAY: {
- sqlite3DbFree(db, p4);
- break;
- }
- case P4_KEYINFO: {
- if( db->pnBytesFreed==0 ) sqlite3KeyInfoUnref((KeyInfo*)p4);
- break;
- }
- case P4_MPRINTF: {
- if( db->pnBytesFreed==0 ) sqlite3_free(p4);
- break;
- }
- case P4_FUNCDEF: {
- freeEphemeralFunction(db, (FuncDef*)p4);
- break;
- }
- case P4_MEM: {
- if( db->pnBytesFreed==0 ){
- sqlite3ValueFree((sqlite3_value*)p4);
- }else{
- Mem *p = (Mem*)p4;
- if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc);
- sqlite3DbFree(db, p);
- }
- break;
- }
- case P4_VTAB : {
- if( db->pnBytesFreed==0 ) sqlite3VtabUnlock((VTable *)p4);
- break;
+ assert( db );
+ switch( p4type ){
+ case P4_FUNCCTX: {
+ freeP4FuncCtx(db, (sqlite3_context*)p4);
+ break;
+ }
+ case P4_REAL:
+ case P4_INT64:
+ case P4_DYNAMIC:
+ case P4_DYNBLOB:
+ case P4_INTARRAY: {
+ sqlite3DbFree(db, p4);
+ break;
+ }
+ case P4_KEYINFO: {
+ if( db->pnBytesFreed==0 ) sqlite3KeyInfoUnref((KeyInfo*)p4);
+ break;
+ }
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+ case P4_EXPR: {
+ sqlite3ExprDelete(db, (Expr*)p4);
+ break;
+ }
+#endif
+ case P4_FUNCDEF: {
+ freeEphemeralFunction(db, (FuncDef*)p4);
+ break;
+ }
+ case P4_MEM: {
+ if( db->pnBytesFreed==0 ){
+ sqlite3ValueFree((sqlite3_value*)p4);
+ }else{
+ freeP4Mem(db, (Mem*)p4);
}
+ break;
+ }
+ case P4_VTAB : {
+ if( db->pnBytesFreed==0 ) sqlite3VtabUnlock((VTable *)p4);
+ break;
}
}
}
static void vdbeFreeOpArray(sqlite3 *db, Op *aOp, int nOp){
if( aOp ){
Op *pOp;
- for(pOp=aOp; pOp<&aOp[nOp]; pOp++){
- freeP4(db, pOp->p4type, pOp->p4.p);
+ for(pOp=&aOp[nOp-1]; pOp>=aOp; pOp--){
+ if( pOp->p4type <= P4_FREE_IF_LE ) freeP4(db, pOp->p4type, pOp->p4.p);
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
sqlite3DbFree(db, pOp->zComment);
#endif
}
+ sqlite3DbFreeNN(db, aOp);
}
- sqlite3DbFree(db, aOp);
}
/*
/*
** Change the opcode at addr into OP_Noop
*/
-SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe *p, int addr){
- if( addr<p->nOp ){
- VdbeOp *pOp = &p->aOp[addr];
- sqlite3 *db = p->db;
- freeP4(db, pOp->p4type, pOp->p4.p);
- memset(pOp, 0, sizeof(pOp[0]));
- pOp->opcode = OP_Noop;
- if( addr==p->nOp-1 ) p->nOp--;
- }
+SQLITE_PRIVATE int sqlite3VdbeChangeToNoop(Vdbe *p, int addr){
+ VdbeOp *pOp;
+ if( p->db->mallocFailed ) return 0;
+ assert( addr>=0 && addr<p->nOp );
+ pOp = &p->aOp[addr];
+ freeP4(p->db, pOp->p4type, pOp->p4.p);
+ pOp->p4type = P4_NOTUSED;
+ pOp->p4.z = 0;
+ pOp->opcode = OP_Noop;
+ return 1;
}
/*
** then remove it. Return true if and only if an opcode was removed.
*/
SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe *p, u8 op){
- if( (p->nOp-1)>(p->pParse->iFixedOp) && p->aOp[p->nOp-1].opcode==op ){
- sqlite3VdbeChangeToNoop(p, p->nOp-1);
- return 1;
+ if( p->nOp>0 && p->aOp[p->nOp-1].opcode==op ){
+ return sqlite3VdbeChangeToNoop(p, p->nOp-1);
}else{
return 0;
}
**
** If addr<0 then change P4 on the most recently inserted instruction.
*/
+static void SQLITE_NOINLINE vdbeChangeP4Full(
+ Vdbe *p,
+ Op *pOp,
+ const char *zP4,
+ int n
+){
+ if( pOp->p4type ){
+ freeP4(p->db, pOp->p4type, pOp->p4.p);
+ pOp->p4type = 0;
+ pOp->p4.p = 0;
+ }
+ if( n<0 ){
+ sqlite3VdbeChangeP4(p, (int)(pOp - p->aOp), zP4, n);
+ }else{
+ if( n==0 ) n = sqlite3Strlen30(zP4);
+ pOp->p4.z = sqlite3DbStrNDup(p->db, zP4, n);
+ pOp->p4type = P4_DYNAMIC;
+ }
+}
SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe *p, int addr, const char *zP4, int n){
Op *pOp;
sqlite3 *db;
assert( p!=0 );
db = p->db;
assert( p->magic==VDBE_MAGIC_INIT );
- if( p->aOp==0 || db->mallocFailed ){
- if( n!=P4_VTAB ){
- freeP4(db, n, (void*)*(char**)&zP4);
- }
+ assert( p->aOp!=0 || db->mallocFailed );
+ if( db->mallocFailed ){
+ if( n!=P4_VTAB ) freeP4(db, n, (void*)*(char**)&zP4);
return;
}
assert( p->nOp>0 );
addr = p->nOp - 1;
}
pOp = &p->aOp[addr];
- assert( pOp->p4type==P4_NOTUSED
- || pOp->p4type==P4_INT32
- || pOp->p4type==P4_KEYINFO );
- freeP4(db, pOp->p4type, pOp->p4.p);
- pOp->p4.p = 0;
+ if( n>=0 || pOp->p4type ){
+ vdbeChangeP4Full(p, pOp, zP4, n);
+ return;
+ }
if( n==P4_INT32 ){
/* Note: this cast is safe, because the origin data point was an int
** that was cast to a (const char *). */
pOp->p4.i = SQLITE_PTR_TO_INT(zP4);
pOp->p4type = P4_INT32;
- }else if( zP4==0 ){
- pOp->p4.p = 0;
- pOp->p4type = P4_NOTUSED;
- }else if( n==P4_KEYINFO ){
- pOp->p4.p = (void*)zP4;
- pOp->p4type = P4_KEYINFO;
- }else if( n==P4_VTAB ){
- pOp->p4.p = (void*)zP4;
- pOp->p4type = P4_VTAB;
- sqlite3VtabLock((VTable *)zP4);
- assert( ((VTable *)zP4)->db==p->db );
- }else if( n<0 ){
+ }else if( zP4!=0 ){
+ assert( n<0 );
pOp->p4.p = (void*)zP4;
pOp->p4type = (signed char)n;
+ if( n==P4_VTAB ) sqlite3VtabLock((VTable*)zP4);
+ }
+}
+
+/*
+** Change the P4 operand of the most recently coded instruction
+** to the value defined by the arguments. This is a high-speed
+** version of sqlite3VdbeChangeP4().
+**
+** The P4 operand must not have been previously defined. And the new
+** P4 must not be P4_INT32. Use sqlite3VdbeChangeP4() in either of
+** those cases.
+*/
+SQLITE_PRIVATE void sqlite3VdbeAppendP4(Vdbe *p, void *pP4, int n){
+ VdbeOp *pOp;
+ assert( n!=P4_INT32 && n!=P4_VTAB );
+ assert( n<=0 );
+ if( p->db->mallocFailed ){
+ freeP4(p->db, n, pP4);
}else{
- if( n==0 ) n = sqlite3Strlen30(zP4);
- pOp->p4.z = sqlite3DbStrNDup(p->db, zP4, n);
- pOp->p4type = P4_DYNAMIC;
+ assert( pP4!=0 );
+ assert( p->nOp>0 );
+ pOp = &p->aOp[p->nOp-1];
+ assert( pOp->p4type==P4_NOTUSED );
+ pOp->p4type = n;
+ pOp->p4.p = pP4;
}
}
*/
SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse *pParse, Index *pIdx){
Vdbe *v = pParse->pVdbe;
+ KeyInfo *pKeyInfo;
assert( v!=0 );
assert( pIdx!=0 );
- sqlite3VdbeChangeP4(v, -1, (char*)sqlite3KeyInfoOfIndex(pParse, pIdx),
- P4_KEYINFO);
+ pKeyInfo = sqlite3KeyInfoOfIndex(pParse, pIdx);
+ if( pKeyInfo ) sqlite3VdbeAppendP4(v, pKeyInfo, P4_KEYINFO);
}
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
const char *zSynopsis;
int nOpName;
int ii, jj;
+ char zAlt[50];
zOpName = sqlite3OpcodeName(pOp->opcode);
nOpName = sqlite3Strlen30(zOpName);
if( zOpName[nOpName+1] ){
int seenCom = 0;
char c;
zSynopsis = zOpName += nOpName + 1;
+ if( strncmp(zSynopsis,"IF ",3)==0 ){
+ if( pOp->p5 & SQLITE_STOREP2 ){
+ sqlite3_snprintf(sizeof(zAlt), zAlt, "r[P2] = (%s)", zSynopsis+3);
+ }else{
+ sqlite3_snprintf(sizeof(zAlt), zAlt, "if %s goto P2", zSynopsis+3);
+ }
+ zSynopsis = zAlt;
+ }
for(ii=jj=0; jj<nTemp-1 && (c = zSynopsis[ii])!=0; ii++){
if( c=='P' ){
c = zSynopsis[++ii];
}
#endif /* SQLITE_DEBUG */
+#if VDBE_DISPLAY_P4 && defined(SQLITE_ENABLE_CURSOR_HINTS)
+/*
+** Translate the P4.pExpr value for an OP_CursorHint opcode into text
+** that can be displayed in the P4 column of EXPLAIN output.
+*/
+static void displayP4Expr(StrAccum *p, Expr *pExpr){
+ const char *zOp = 0;
+ switch( pExpr->op ){
+ case TK_STRING:
+ sqlite3XPrintf(p, "%Q", pExpr->u.zToken);
+ break;
+ case TK_INTEGER:
+ sqlite3XPrintf(p, "%d", pExpr->u.iValue);
+ break;
+ case TK_NULL:
+ sqlite3XPrintf(p, "NULL");
+ break;
+ case TK_REGISTER: {
+ sqlite3XPrintf(p, "r[%d]", pExpr->iTable);
+ break;
+ }
+ case TK_COLUMN: {
+ if( pExpr->iColumn<0 ){
+ sqlite3XPrintf(p, "rowid");
+ }else{
+ sqlite3XPrintf(p, "c%d", (int)pExpr->iColumn);
+ }
+ break;
+ }
+ case TK_LT: zOp = "LT"; break;
+ case TK_LE: zOp = "LE"; break;
+ case TK_GT: zOp = "GT"; break;
+ case TK_GE: zOp = "GE"; break;
+ case TK_NE: zOp = "NE"; break;
+ case TK_EQ: zOp = "EQ"; break;
+ case TK_IS: zOp = "IS"; break;
+ case TK_ISNOT: zOp = "ISNOT"; break;
+ case TK_AND: zOp = "AND"; break;
+ case TK_OR: zOp = "OR"; break;
+ case TK_PLUS: zOp = "ADD"; break;
+ case TK_STAR: zOp = "MUL"; break;
+ case TK_MINUS: zOp = "SUB"; break;
+ case TK_REM: zOp = "REM"; break;
+ case TK_BITAND: zOp = "BITAND"; break;
+ case TK_BITOR: zOp = "BITOR"; break;
+ case TK_SLASH: zOp = "DIV"; break;
+ case TK_LSHIFT: zOp = "LSHIFT"; break;
+ case TK_RSHIFT: zOp = "RSHIFT"; break;
+ case TK_CONCAT: zOp = "CONCAT"; break;
+ case TK_UMINUS: zOp = "MINUS"; break;
+ case TK_UPLUS: zOp = "PLUS"; break;
+ case TK_BITNOT: zOp = "BITNOT"; break;
+ case TK_NOT: zOp = "NOT"; break;
+ case TK_ISNULL: zOp = "ISNULL"; break;
+ case TK_NOTNULL: zOp = "NOTNULL"; break;
-#if !defined(SQLITE_OMIT_EXPLAIN) || !defined(NDEBUG) \
- || defined(VDBE_PROFILE) || defined(SQLITE_DEBUG)
+ default:
+ sqlite3XPrintf(p, "%s", "expr");
+ break;
+ }
+
+ if( zOp ){
+ sqlite3XPrintf(p, "%s(", zOp);
+ displayP4Expr(p, pExpr->pLeft);
+ if( pExpr->pRight ){
+ sqlite3StrAccumAppend(p, ",", 1);
+ displayP4Expr(p, pExpr->pRight);
+ }
+ sqlite3StrAccumAppend(p, ")", 1);
+ }
+}
+#endif /* VDBE_DISPLAY_P4 && defined(SQLITE_ENABLE_CURSOR_HINTS) */
+
+
+#if VDBE_DISPLAY_P4
/*
** Compute a string that describes the P4 parameter for an opcode.
** Use zTemp for any required temporary buffer space.
*/
static char *displayP4(Op *pOp, char *zTemp, int nTemp){
char *zP4 = zTemp;
+ StrAccum x;
assert( nTemp>=20 );
+ sqlite3StrAccumInit(&x, 0, zTemp, nTemp, 0);
switch( pOp->p4type ){
case P4_KEYINFO: {
- int i, j;
+ int j;
KeyInfo *pKeyInfo = pOp->p4.pKeyInfo;
assert( pKeyInfo->aSortOrder!=0 );
- sqlite3_snprintf(nTemp, zTemp, "k(%d", pKeyInfo->nField);
- i = sqlite3Strlen30(zTemp);
- for(j=0; j<pKeyInfo->nField; j++){
+ sqlite3XPrintf(&x, "k(%d", pKeyInfo->nKeyField);
+ for(j=0; j<pKeyInfo->nKeyField; j++){
CollSeq *pColl = pKeyInfo->aColl[j];
- const char *zColl = pColl ? pColl->zName : "nil";
- int n = sqlite3Strlen30(zColl);
- if( n==6 && memcmp(zColl,"BINARY",6)==0 ){
- zColl = "B";
- n = 1;
- }
- if( i+n>nTemp-7 ){
- memcpy(&zTemp[i],",...",4);
- i += 4;
- break;
- }
- zTemp[i++] = ',';
- if( pKeyInfo->aSortOrder[j] ){
- zTemp[i++] = '-';
- }
- memcpy(&zTemp[i], zColl, n+1);
- i += n;
+ const char *zColl = pColl ? pColl->zName : "";
+ if( strcmp(zColl, "BINARY")==0 ) zColl = "B";
+ sqlite3XPrintf(&x, ",%s%s", pKeyInfo->aSortOrder[j] ? "-" : "", zColl);
}
- zTemp[i++] = ')';
- zTemp[i] = 0;
- assert( i<nTemp );
+ sqlite3StrAccumAppend(&x, ")", 1);
+ break;
+ }
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+ case P4_EXPR: {
+ displayP4Expr(&x, pOp->p4.pExpr);
break;
}
+#endif
case P4_COLLSEQ: {
CollSeq *pColl = pOp->p4.pColl;
- sqlite3_snprintf(nTemp, zTemp, "(%.20s)", pColl->zName);
+ sqlite3XPrintf(&x, "(%.20s)", pColl->zName);
break;
}
case P4_FUNCDEF: {
FuncDef *pDef = pOp->p4.pFunc;
- sqlite3_snprintf(nTemp, zTemp, "%s(%d)", pDef->zName, pDef->nArg);
+ sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg);
break;
}
-#ifdef SQLITE_DEBUG
+#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
case P4_FUNCCTX: {
FuncDef *pDef = pOp->p4.pCtx->pFunc;
- sqlite3_snprintf(nTemp, zTemp, "%s(%d)", pDef->zName, pDef->nArg);
+ sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg);
break;
}
#endif
case P4_INT64: {
- sqlite3_snprintf(nTemp, zTemp, "%lld", *pOp->p4.pI64);
+ sqlite3XPrintf(&x, "%lld", *pOp->p4.pI64);
break;
}
case P4_INT32: {
- sqlite3_snprintf(nTemp, zTemp, "%d", pOp->p4.i);
+ sqlite3XPrintf(&x, "%d", pOp->p4.i);
break;
}
case P4_REAL: {
- sqlite3_snprintf(nTemp, zTemp, "%.16g", *pOp->p4.pReal);
+ sqlite3XPrintf(&x, "%.16g", *pOp->p4.pReal);
break;
}
case P4_MEM: {
if( pMem->flags & MEM_Str ){
zP4 = pMem->z;
}else if( pMem->flags & MEM_Int ){
- sqlite3_snprintf(nTemp, zTemp, "%lld", pMem->u.i);
+ sqlite3XPrintf(&x, "%lld", pMem->u.i);
}else if( pMem->flags & MEM_Real ){
- sqlite3_snprintf(nTemp, zTemp, "%.16g", pMem->u.r);
+ sqlite3XPrintf(&x, "%.16g", pMem->u.r);
}else if( pMem->flags & MEM_Null ){
- sqlite3_snprintf(nTemp, zTemp, "NULL");
+ zP4 = "NULL";
}else{
assert( pMem->flags & MEM_Blob );
zP4 = "(blob)";
#ifndef SQLITE_OMIT_VIRTUALTABLE
case P4_VTAB: {
sqlite3_vtab *pVtab = pOp->p4.pVtab->pVtab;
- sqlite3_snprintf(nTemp, zTemp, "vtab:%p", pVtab);
+ sqlite3XPrintf(&x, "vtab:%p", pVtab);
break;
}
#endif
case P4_INTARRAY: {
- sqlite3_snprintf(nTemp, zTemp, "intarray");
+ int i;
+ int *ai = pOp->p4.ai;
+ int n = ai[0]; /* The first element of an INTARRAY is always the
+ ** count of the number of elements to follow */
+ for(i=1; i<=n; i++){
+ sqlite3XPrintf(&x, ",%d", ai[i]);
+ }
+ zTemp[0] = '[';
+ sqlite3StrAccumAppend(&x, "]", 1);
break;
}
case P4_SUBPROGRAM: {
- sqlite3_snprintf(nTemp, zTemp, "program");
+ sqlite3XPrintf(&x, "program");
break;
}
+ case P4_DYNBLOB:
case P4_ADVANCE: {
zTemp[0] = 0;
break;
}
+ case P4_TABLE: {
+ sqlite3XPrintf(&x, "%s", pOp->p4.pTab->zName);
+ break;
+ }
default: {
zP4 = pOp->p4.z;
if( zP4==0 ){
}
}
}
+ sqlite3StrAccumFinish(&x);
assert( zP4!=0 );
return zP4;
}
-#endif
+#endif /* VDBE_DISPLAY_P4 */
/*
** Declare to the Vdbe that the BTree object at db->aDb[i] is used.
}
}
-#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE>0
+#if !defined(SQLITE_OMIT_SHARED_CACHE)
/*
** If SQLite is compiled to support shared-cache mode and to be threadsafe,
** this routine obtains the mutex associated with each BtShared structure
}
#endif
+/*
+** Initialize an array of N Mem element.
+*/
+static void initMemArray(Mem *p, int N, sqlite3 *db, u16 flags){
+ while( (N--)>0 ){
+ p->db = db;
+ p->flags = flags;
+ p->szMalloc = 0;
+#ifdef SQLITE_DEBUG
+ p->pScopyFrom = 0;
+#endif
+ p++;
+ }
+}
+
/*
** Release an array of N Mem elements
*/
if( p && N ){
Mem *pEnd = &p[N];
sqlite3 *db = p->db;
- u8 malloc_failed = db->mallocFailed;
if( db->pnBytesFreed ){
do{
if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc);
if( p->flags&(MEM_Agg|MEM_Dyn|MEM_Frame|MEM_RowSet) ){
sqlite3VdbeMemRelease(p);
}else if( p->szMalloc ){
- sqlite3DbFree(db, p->zMalloc);
+ sqlite3DbFreeNN(db, p->zMalloc);
p->szMalloc = 0;
}
p->flags = MEM_Undefined;
}while( (++p)<pEnd );
- db->mallocFailed = malloc_failed;
}
}
sqlite3VdbeFreeCursor(p->v, apCsr[i]);
}
releaseMemArray(aMem, p->nChildMem);
+ sqlite3VdbeDeleteAuxData(p->v->db, &p->pAuxData, -1, 0);
sqlite3DbFree(p->v->db, p);
}
int i; /* Loop counter */
int rc = SQLITE_OK; /* Return code */
Mem *pMem = &p->aMem[1]; /* First Mem of result set */
+ int bListSubprogs = (p->explain==1 || (db->flags & SQLITE_TriggerEQP)!=0);
+ Op *pOp = 0;
assert( p->explain );
assert( p->magic==VDBE_MAGIC_RUN );
if( p->rc==SQLITE_NOMEM ){
/* This happens if a malloc() inside a call to sqlite3_column_text() or
** sqlite3_column_text16() failed. */
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return SQLITE_ERROR;
}
** encountered, but p->pc will eventually catch up to nRow.
*/
nRow = p->nOp;
- if( p->explain==1 ){
+ if( bListSubprogs ){
/* The first 8 memory cells are used for the result set. So we will
** commandeer the 9th cell to use as storage for an array of pointers
** to trigger subprograms. The VDBE is guaranteed to have at least 9
do{
i = p->pc++;
- }while( i<nRow && p->explain==2 && p->aOp[i].opcode!=OP_Explain );
- if( i>=nRow ){
- p->rc = SQLITE_OK;
- rc = SQLITE_DONE;
- }else if( db->u1.isInterrupted ){
- p->rc = SQLITE_INTERRUPT;
- rc = SQLITE_ERROR;
- sqlite3VdbeError(p, sqlite3ErrStr(p->rc));
- }else{
- char *zP4;
- Op *pOp;
+ if( i>=nRow ){
+ p->rc = SQLITE_OK;
+ rc = SQLITE_DONE;
+ break;
+ }
if( i<p->nOp ){
/* The output line number is small enough that we are still in the
** main program. */
}
pOp = &apSub[j]->aOp[i];
}
- if( p->explain==1 ){
- pMem->flags = MEM_Int;
- pMem->u.i = i; /* Program counter */
- pMem++;
-
- pMem->flags = MEM_Static|MEM_Str|MEM_Term;
- pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */
- assert( pMem->z!=0 );
- pMem->n = sqlite3Strlen30(pMem->z);
- pMem->enc = SQLITE_UTF8;
- pMem++;
- /* When an OP_Program opcode is encounter (the only opcode that has
- ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms
- ** kept in p->aMem[9].z to hold the new program - assuming this subprogram
- ** has not already been seen.
- */
- if( pOp->p4type==P4_SUBPROGRAM ){
- int nByte = (nSub+1)*sizeof(SubProgram*);
- int j;
- for(j=0; j<nSub; j++){
- if( apSub[j]==pOp->p4.pProgram ) break;
- }
- if( j==nSub && SQLITE_OK==sqlite3VdbeMemGrow(pSub, nByte, nSub!=0) ){
- apSub = (SubProgram **)pSub->z;
- apSub[nSub++] = pOp->p4.pProgram;
- pSub->flags |= MEM_Blob;
- pSub->n = nSub*sizeof(SubProgram*);
+ /* When an OP_Program opcode is encounter (the only opcode that has
+ ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms
+ ** kept in p->aMem[9].z to hold the new program - assuming this subprogram
+ ** has not already been seen.
+ */
+ if( bListSubprogs && pOp->p4type==P4_SUBPROGRAM ){
+ int nByte = (nSub+1)*sizeof(SubProgram*);
+ int j;
+ for(j=0; j<nSub; j++){
+ if( apSub[j]==pOp->p4.pProgram ) break;
+ }
+ if( j==nSub ){
+ p->rc = sqlite3VdbeMemGrow(pSub, nByte, nSub!=0);
+ if( p->rc!=SQLITE_OK ){
+ rc = SQLITE_ERROR;
+ break;
}
+ apSub = (SubProgram **)pSub->z;
+ apSub[nSub++] = pOp->p4.pProgram;
+ pSub->flags |= MEM_Blob;
+ pSub->n = nSub*sizeof(SubProgram*);
+ nRow += pOp->p4.pProgram->nOp;
}
}
+ }while( p->explain==2 && pOp->opcode!=OP_Explain );
- pMem->flags = MEM_Int;
- pMem->u.i = pOp->p1; /* P1 */
- pMem++;
+ if( rc==SQLITE_OK ){
+ if( db->u1.isInterrupted ){
+ p->rc = SQLITE_INTERRUPT;
+ rc = SQLITE_ERROR;
+ sqlite3VdbeError(p, sqlite3ErrStr(p->rc));
+ }else{
+ char *zP4;
+ if( p->explain==1 ){
+ pMem->flags = MEM_Int;
+ pMem->u.i = i; /* Program counter */
+ pMem++;
+
+ pMem->flags = MEM_Static|MEM_Str|MEM_Term;
+ pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */
+ assert( pMem->z!=0 );
+ pMem->n = sqlite3Strlen30(pMem->z);
+ pMem->enc = SQLITE_UTF8;
+ pMem++;
+ }
- pMem->flags = MEM_Int;
- pMem->u.i = pOp->p2; /* P2 */
- pMem++;
+ pMem->flags = MEM_Int;
+ pMem->u.i = pOp->p1; /* P1 */
+ pMem++;
- pMem->flags = MEM_Int;
- pMem->u.i = pOp->p3; /* P3 */
- pMem++;
+ pMem->flags = MEM_Int;
+ pMem->u.i = pOp->p2; /* P2 */
+ pMem++;
- if( sqlite3VdbeMemClearAndResize(pMem, 32) ){ /* P4 */
- assert( p->db->mallocFailed );
- return SQLITE_ERROR;
- }
- pMem->flags = MEM_Str|MEM_Term;
- zP4 = displayP4(pOp, pMem->z, 32);
- if( zP4!=pMem->z ){
- sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0);
- }else{
- assert( pMem->z!=0 );
- pMem->n = sqlite3Strlen30(pMem->z);
- pMem->enc = SQLITE_UTF8;
- }
- pMem++;
+ pMem->flags = MEM_Int;
+ pMem->u.i = pOp->p3; /* P3 */
+ pMem++;
- if( p->explain==1 ){
- if( sqlite3VdbeMemClearAndResize(pMem, 4) ){
+ if( sqlite3VdbeMemClearAndResize(pMem, 100) ){ /* P4 */
assert( p->db->mallocFailed );
return SQLITE_ERROR;
}
pMem->flags = MEM_Str|MEM_Term;
- pMem->n = 2;
- sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */
- pMem->enc = SQLITE_UTF8;
+ zP4 = displayP4(pOp, pMem->z, pMem->szMalloc);
+ if( zP4!=pMem->z ){
+ pMem->n = 0;
+ sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0);
+ }else{
+ assert( pMem->z!=0 );
+ pMem->n = sqlite3Strlen30(pMem->z);
+ pMem->enc = SQLITE_UTF8;
+ }
pMem++;
-
+
+ if( p->explain==1 ){
+ if( sqlite3VdbeMemClearAndResize(pMem, 4) ){
+ assert( p->db->mallocFailed );
+ return SQLITE_ERROR;
+ }
+ pMem->flags = MEM_Str|MEM_Term;
+ pMem->n = 2;
+ sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */
+ pMem->enc = SQLITE_UTF8;
+ pMem++;
+
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
- if( sqlite3VdbeMemClearAndResize(pMem, 500) ){
- assert( p->db->mallocFailed );
- return SQLITE_ERROR;
- }
- pMem->flags = MEM_Str|MEM_Term;
- pMem->n = displayComment(pOp, zP4, pMem->z, 500);
- pMem->enc = SQLITE_UTF8;
+ if( sqlite3VdbeMemClearAndResize(pMem, 500) ){
+ assert( p->db->mallocFailed );
+ return SQLITE_ERROR;
+ }
+ pMem->flags = MEM_Str|MEM_Term;
+ pMem->n = displayComment(pOp, zP4, pMem->z, 500);
+ pMem->enc = SQLITE_UTF8;
#else
- pMem->flags = MEM_Null; /* Comment */
+ pMem->flags = MEM_Null; /* Comment */
#endif
- }
+ }
- p->nResColumn = 8 - 4*(p->explain-1);
- p->pResultSet = &p->aMem[1];
- p->rc = SQLITE_OK;
- rc = SQLITE_ROW;
+ p->nResColumn = 8 - 4*(p->explain-1);
+ p->pResultSet = &p->aMem[1];
+ p->rc = SQLITE_OK;
+ rc = SQLITE_ROW;
+ }
}
return rc;
}
}
#endif /* !SQLITE_OMIT_TRACE && SQLITE_ENABLE_IOTRACE */
-/*
-** Allocate space from a fixed size buffer and return a pointer to
-** that space. If insufficient space is available, return NULL.
-**
-** The pBuf parameter is the initial value of a pointer which will
-** receive the new memory. pBuf is normally NULL. If pBuf is not
-** NULL, it means that memory space has already been allocated and that
-** this routine should not allocate any new memory. When pBuf is not
-** NULL simply return pBuf. Only allocate new memory space when pBuf
-** is NULL.
-**
-** nByte is the number of bytes of space needed.
+/* An instance of this object describes bulk memory available for use
+** by subcomponents of a prepared statement. Space is allocated out
+** of a ReusableSpace object by the allocSpace() routine below.
+*/
+struct ReusableSpace {
+ u8 *pSpace; /* Available memory */
+ int nFree; /* Bytes of available memory */
+ int nNeeded; /* Total bytes that could not be allocated */
+};
+
+/* Try to allocate nByte bytes of 8-byte aligned bulk memory for pBuf
+** from the ReusableSpace object. Return a pointer to the allocated
+** memory on success. If insufficient memory is available in the
+** ReusableSpace object, increase the ReusableSpace.nNeeded
+** value by the amount needed and return NULL.
**
-** *ppFrom points to available space and pEnd points to the end of the
-** available space. When space is allocated, *ppFrom is advanced past
-** the end of the allocated space.
+** If pBuf is not initially NULL, that means that the memory has already
+** been allocated by a prior call to this routine, so just return a copy
+** of pBuf and leave ReusableSpace unchanged.
**
-** *pnByte is a counter of the number of bytes of space that have failed
-** to allocate. If there is insufficient space in *ppFrom to satisfy the
-** request, then increment *pnByte by the amount of the request.
+** This allocator is employed to repurpose unused slots at the end of the
+** opcode array of prepared state for other memory needs of the prepared
+** statement.
*/
static void *allocSpace(
- void *pBuf, /* Where return pointer will be stored */
- int nByte, /* Number of bytes to allocate */
- u8 **ppFrom, /* IN/OUT: Allocate from *ppFrom */
- u8 *pEnd, /* Pointer to 1 byte past the end of *ppFrom buffer */
- int *pnByte /* If allocation cannot be made, increment *pnByte */
-){
- assert( EIGHT_BYTE_ALIGNMENT(*ppFrom) );
- if( pBuf ) return pBuf;
- nByte = ROUND8(nByte);
- if( &(*ppFrom)[nByte] <= pEnd ){
- pBuf = (void*)*ppFrom;
- *ppFrom += nByte;
- }else{
- *pnByte += nByte;
+ struct ReusableSpace *p, /* Bulk memory available for allocation */
+ void *pBuf, /* Pointer to a prior allocation */
+ int nByte /* Bytes of memory needed */
+){
+ assert( EIGHT_BYTE_ALIGNMENT(p->pSpace) );
+ if( pBuf==0 ){
+ nByte = ROUND8(nByte);
+ if( nByte <= p->nFree ){
+ p->nFree -= nByte;
+ pBuf = &p->pSpace[p->nFree];
+ }else{
+ p->nNeeded += nByte;
+ }
}
+ assert( EIGHT_BYTE_ALIGNMENT(pBuf) );
return pBuf;
}
int i;
#endif
assert( p!=0 );
- assert( p->magic==VDBE_MAGIC_INIT );
+ assert( p->magic==VDBE_MAGIC_INIT || p->magic==VDBE_MAGIC_RESET );
/* There should be at least one opcode.
*/
p->magic = VDBE_MAGIC_RUN;
#ifdef SQLITE_DEBUG
- for(i=1; i<p->nMem; i++){
+ for(i=0; i<p->nMem; i++){
assert( p->aMem[i].db==p->db );
}
#endif
p->pc = -1;
p->rc = SQLITE_OK;
p->errorAction = OE_Abort;
- p->magic = VDBE_MAGIC_RUN;
p->nChange = 0;
p->cacheCtr = 1;
p->minWriteFileFormat = 255;
int nMem; /* Number of VM memory registers */
int nCursor; /* Number of cursors required */
int nArg; /* Number of arguments in subprograms */
- int nOnce; /* Number of OP_Once instructions */
int n; /* Loop counter */
- u8 *zCsr; /* Memory available for allocation */
- u8 *zEnd; /* First byte past allocated memory */
- int nByte; /* How much extra memory is needed */
+ struct ReusableSpace x; /* Reusable bulk memory */
assert( p!=0 );
assert( p->nOp>0 );
nMem = pParse->nMem;
nCursor = pParse->nTab;
nArg = pParse->nMaxArg;
- nOnce = pParse->nOnce;
- if( nOnce==0 ) nOnce = 1; /* Ensure at least one byte in p->aOnceFlag[] */
- /* For each cursor required, also allocate a memory cell. Memory
- ** cells (nMem+1-nCursor)..nMem, inclusive, will never be used by
- ** the vdbe program. Instead they are used to allocate space for
- ** VdbeCursor/BtCursor structures. The blob of memory associated with
- ** cursor 0 is stored in memory cell nMem. Memory cell (nMem-1)
- ** stores the blob of memory associated with cursor 1, etc.
- **
+ /* Each cursor uses a memory cell. The first cursor (cursor 0) can
+ ** use aMem[0] which is not otherwise used by the VDBE program. Allocate
+ ** space at the end of aMem[] for cursors 1 and greater.
** See also: allocateCursor().
*/
nMem += nCursor;
+ if( nCursor==0 && nMem>0 ) nMem++; /* Space for aMem[0] even if not used */
- /* Allocate space for memory registers, SQL variables, VDBE cursors and
- ** an array to marshal SQL function arguments in.
+ /* Figure out how much reusable memory is available at the end of the
+ ** opcode array. This extra memory will be reallocated for other elements
+ ** of the prepared statement.
*/
- zCsr = (u8*)&p->aOp[p->nOp]; /* Memory avaliable for allocation */
- zEnd = (u8*)&p->aOp[pParse->nOpAlloc]; /* First byte past end of zCsr[] */
+ n = ROUND8(sizeof(Op)*p->nOp); /* Bytes of opcode memory used */
+ x.pSpace = &((u8*)p->aOp)[n]; /* Unused opcode memory */
+ assert( EIGHT_BYTE_ALIGNMENT(x.pSpace) );
+ x.nFree = ROUNDDOWN8(pParse->szOpAlloc - n); /* Bytes of unused memory */
+ assert( x.nFree>=0 );
+ assert( EIGHT_BYTE_ALIGNMENT(&x.pSpace[x.nFree]) );
resolveP2Values(p, &nArg);
p->usesStmtJournal = (u8)(pParse->isMultiWrite && pParse->mayAbort);
if( pParse->explain && nMem<10 ){
nMem = 10;
}
- memset(zCsr, 0, zEnd-zCsr);
- zCsr += (zCsr - (u8*)0)&7;
- assert( EIGHT_BYTE_ALIGNMENT(zCsr) );
p->expired = 0;
- /* Memory for registers, parameters, cursor, etc, is allocated in two
- ** passes. On the first pass, we try to reuse unused space at the
+ /* Memory for registers, parameters, cursor, etc, is allocated in one or two
+ ** passes. On the first pass, we try to reuse unused memory at the
** end of the opcode array. If we are unable to satisfy all memory
** requirements by reusing the opcode array tail, then the second
- ** pass will fill in the rest using a fresh allocation.
+ ** pass will fill in the remainder using a fresh memory allocation.
**
** This two-pass approach that reuses as much memory as possible from
- ** the leftover space at the end of the opcode array can significantly
+ ** the leftover memory at the end of the opcode array. This can significantly
** reduce the amount of memory held by a prepared statement.
*/
do {
- nByte = 0;
- p->aMem = allocSpace(p->aMem, nMem*sizeof(Mem), &zCsr, zEnd, &nByte);
- p->aVar = allocSpace(p->aVar, nVar*sizeof(Mem), &zCsr, zEnd, &nByte);
- p->apArg = allocSpace(p->apArg, nArg*sizeof(Mem*), &zCsr, zEnd, &nByte);
- p->azVar = allocSpace(p->azVar, nVar*sizeof(char*), &zCsr, zEnd, &nByte);
- p->apCsr = allocSpace(p->apCsr, nCursor*sizeof(VdbeCursor*),
- &zCsr, zEnd, &nByte);
- p->aOnceFlag = allocSpace(p->aOnceFlag, nOnce, &zCsr, zEnd, &nByte);
+ x.nNeeded = 0;
+ p->aMem = allocSpace(&x, p->aMem, nMem*sizeof(Mem));
+ p->aVar = allocSpace(&x, p->aVar, nVar*sizeof(Mem));
+ p->apArg = allocSpace(&x, p->apArg, nArg*sizeof(Mem*));
+ p->apCsr = allocSpace(&x, p->apCsr, nCursor*sizeof(VdbeCursor*));
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
- p->anExec = allocSpace(p->anExec, p->nOp*sizeof(i64), &zCsr, zEnd, &nByte);
+ p->anExec = allocSpace(&x, p->anExec, p->nOp*sizeof(i64));
#endif
- if( nByte ){
- p->pFree = sqlite3DbMallocZero(db, nByte);
- }
- zCsr = p->pFree;
- zEnd = &zCsr[nByte];
- }while( nByte && !db->mallocFailed );
+ if( x.nNeeded==0 ) break;
+ x.pSpace = p->pFree = sqlite3DbMallocRawNN(db, x.nNeeded);
+ x.nFree = x.nNeeded;
+ }while( !db->mallocFailed );
- p->nCursor = nCursor;
- p->nOnceFlag = nOnce;
- if( p->aVar ){
+ p->pVList = pParse->pVList;
+ pParse->pVList = 0;
+ p->explain = pParse->explain;
+ if( db->mallocFailed ){
+ p->nVar = 0;
+ p->nCursor = 0;
+ p->nMem = 0;
+ }else{
+ p->nCursor = nCursor;
p->nVar = (ynVar)nVar;
- for(n=0; n<nVar; n++){
- p->aVar[n].flags = MEM_Null;
- p->aVar[n].db = db;
- }
- }
- if( p->azVar && pParse->nzVar>0 ){
- p->nzVar = pParse->nzVar;
- memcpy(p->azVar, pParse->azVar, p->nzVar*sizeof(p->azVar[0]));
- memset(pParse->azVar, 0, pParse->nzVar*sizeof(pParse->azVar[0]));
- }
- if( p->aMem ){
- p->aMem--; /* aMem[] goes from 1..nMem */
- p->nMem = nMem; /* not from 0..nMem-1 */
- for(n=1; n<=nMem; n++){
- p->aMem[n].flags = MEM_Undefined;
- p->aMem[n].db = db;
- }
+ initMemArray(p->aVar, nVar, db, MEM_Null);
+ p->nMem = nMem;
+ initMemArray(p->aMem, nMem, db, MEM_Undefined);
+ memset(p->apCsr, 0, nCursor*sizeof(VdbeCursor*));
+#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
+ memset(p->anExec, 0, p->nOp*sizeof(i64));
+#endif
}
- p->explain = pParse->explain;
sqlite3VdbeRewind(p);
}
if( pCx==0 ){
return;
}
- sqlite3VdbeSorterClose(p->db, pCx);
- if( pCx->pBt ){
- sqlite3BtreeClose(pCx->pBt);
- /* The pCx->pCursor will be close automatically, if it exists, by
- ** the call above. */
- }else if( pCx->pCursor ){
- sqlite3BtreeCloseCursor(pCx->pCursor);
- }
+ assert( pCx->pBtx==0 || pCx->eCurType==CURTYPE_BTREE );
+ switch( pCx->eCurType ){
+ case CURTYPE_SORTER: {
+ sqlite3VdbeSorterClose(p->db, pCx);
+ break;
+ }
+ case CURTYPE_BTREE: {
+ if( pCx->isEphemeral ){
+ if( pCx->pBtx ) sqlite3BtreeClose(pCx->pBtx);
+ /* The pCx->pCursor will be close automatically, if it exists, by
+ ** the call above. */
+ }else{
+ assert( pCx->uc.pCursor!=0 );
+ sqlite3BtreeCloseCursor(pCx->uc.pCursor);
+ }
+ break;
+ }
#ifndef SQLITE_OMIT_VIRTUALTABLE
- else if( pCx->pVtabCursor ){
- sqlite3_vtab_cursor *pVtabCursor = pCx->pVtabCursor;
- const sqlite3_module *pModule = pVtabCursor->pVtab->pModule;
- assert( pVtabCursor->pVtab->nRef>0 );
- pVtabCursor->pVtab->nRef--;
- pModule->xClose(pVtabCursor);
- }
+ case CURTYPE_VTAB: {
+ sqlite3_vtab_cursor *pVCur = pCx->uc.pVCur;
+ const sqlite3_module *pModule = pVCur->pVtab->pModule;
+ assert( pVCur->pVtab->nRef>0 );
+ pVCur->pVtab->nRef--;
+ pModule->xClose(pVCur);
+ break;
+ }
#endif
+ }
}
/*
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
v->anExec = pFrame->anExec;
#endif
- v->aOnceFlag = pFrame->aOnceFlag;
- v->nOnceFlag = pFrame->nOnceFlag;
v->aOp = pFrame->aOp;
v->nOp = pFrame->nOp;
v->aMem = pFrame->aMem;
v->db->lastRowid = pFrame->lastRowid;
v->nChange = pFrame->nChange;
v->db->nChange = pFrame->nDbChange;
+ sqlite3VdbeDeleteAuxData(v->db, &v->pAuxData, -1, 0);
+ v->pAuxData = pFrame->pAuxData;
+ pFrame->pAuxData = 0;
return pFrame->pc;
}
assert( p->nFrame==0 );
closeCursorsInFrame(p);
if( p->aMem ){
- releaseMemArray(&p->aMem[1], p->nMem);
+ releaseMemArray(p->aMem, p->nMem);
}
while( p->pDelFrame ){
VdbeFrame *pDel = p->pDelFrame;
}
/* Delete any auxdata allocations made by the VM */
- if( p->pAuxData ) sqlite3VdbeDeleteAuxData(p, -1, 0);
+ if( p->pAuxData ) sqlite3VdbeDeleteAuxData(p->db, &p->pAuxData, -1, 0);
assert( p->pAuxData==0 );
}
-/*
-** Clean up the VM after a single run.
-*/
-static void Cleanup(Vdbe *p){
- sqlite3 *db = p->db;
-
-#ifdef SQLITE_DEBUG
- /* Execute assert() statements to ensure that the Vdbe.apCsr[] and
- ** Vdbe.aMem[] arrays have already been cleaned up. */
- int i;
- if( p->apCsr ) for(i=0; i<p->nCursor; i++) assert( p->apCsr[i]==0 );
- if( p->aMem ){
- for(i=1; i<=p->nMem; i++) assert( p->aMem[i].flags==MEM_Undefined );
- }
-#endif
-
- sqlite3DbFree(db, p->zErrMsg);
- p->zErrMsg = 0;
- p->pResultSet = 0;
-}
-
/*
** Set the number of result columns that will be returned by this SQL
** statement. This is now set at compile time, rather than during
** be called on an SQL statement before sqlite3_step().
*/
SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe *p, int nResColumn){
- Mem *pColName;
int n;
sqlite3 *db = p->db;
- releaseMemArray(p->aColName, p->nResColumn*COLNAME_N);
- sqlite3DbFree(db, p->aColName);
+ if( p->nResColumn ){
+ releaseMemArray(p->aColName, p->nResColumn*COLNAME_N);
+ sqlite3DbFree(db, p->aColName);
+ }
n = nResColumn*COLNAME_N;
p->nResColumn = (u16)nResColumn;
- p->aColName = pColName = (Mem*)sqlite3DbMallocZero(db, sizeof(Mem)*n );
+ p->aColName = (Mem*)sqlite3DbMallocRawNN(db, sizeof(Mem)*n );
if( p->aColName==0 ) return;
- while( n-- > 0 ){
- pColName->flags = MEM_Null;
- pColName->db = p->db;
- pColName++;
- }
+ initMemArray(p->aColName, n, db, MEM_Null);
}
/*
assert( var<COLNAME_N );
if( p->db->mallocFailed ){
assert( !zName || xDel!=SQLITE_DYNAMIC );
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
assert( p->aColName!=0 );
pColName = &(p->aColName[idx+var*p->nResColumn]);
*/
static int vdbeCommit(sqlite3 *db, Vdbe *p){
int i;
- int nTrans = 0; /* Number of databases with an active write-transaction */
+ int nTrans = 0; /* Number of databases with an active write-transaction
+ ** that are candidates for a two-phase commit using a
+ ** master-journal */
int rc = SQLITE_OK;
int needXcommit = 0;
for(i=0; rc==SQLITE_OK && i<db->nDb; i++){
Btree *pBt = db->aDb[i].pBt;
if( sqlite3BtreeIsInTrans(pBt) ){
+ /* Whether or not a database might need a master journal depends upon
+ ** its journal mode (among other things). This matrix determines which
+ ** journal modes use a master journal and which do not */
+ static const u8 aMJNeeded[] = {
+ /* DELETE */ 1,
+ /* PERSIST */ 1,
+ /* OFF */ 0,
+ /* TRUNCATE */ 1,
+ /* MEMORY */ 0,
+ /* WAL */ 0
+ };
+ Pager *pPager; /* Pager associated with pBt */
needXcommit = 1;
- if( i!=1 ) nTrans++;
sqlite3BtreeEnter(pBt);
- rc = sqlite3PagerExclusiveLock(sqlite3BtreePager(pBt));
+ pPager = sqlite3BtreePager(pBt);
+ if( db->aDb[i].safety_level!=PAGER_SYNCHRONOUS_OFF
+ && aMJNeeded[sqlite3PagerGetJournalMode(pPager)]
+ && sqlite3PagerIsMemdb(pPager)==0
+ ){
+ assert( i!=1 );
+ nTrans++;
+ }
+ rc = sqlite3PagerExclusiveLock(pPager);
sqlite3BtreeLeave(pBt);
}
}
#ifndef SQLITE_OMIT_DISKIO
else{
sqlite3_vfs *pVfs = db->pVfs;
- int needSync = 0;
char *zMaster = 0; /* File-name for the master journal */
char const *zMainFile = sqlite3BtreeGetFilename(db->aDb[0].pBt);
sqlite3_file *pMaster = 0;
/* Select a master journal file name */
nMainFile = sqlite3Strlen30(zMainFile);
zMaster = sqlite3MPrintf(db, "%s-mjXXXXXX9XXz", zMainFile);
- if( zMaster==0 ) return SQLITE_NOMEM;
+ if( zMaster==0 ) return SQLITE_NOMEM_BKPT;
do {
u32 iRandom;
if( retryCount ){
continue; /* Ignore TEMP and :memory: databases */
}
assert( zFile[0]!=0 );
- if( !needSync && !sqlite3BtreeSyncDisabled(pBt) ){
- needSync = 1;
- }
rc = sqlite3OsWrite(pMaster, zFile, sqlite3Strlen30(zFile)+1, offset);
offset += sqlite3Strlen30(zFile)+1;
if( rc!=SQLITE_OK ){
/* Sync the master journal file. If the IOCAP_SEQUENTIAL device
** flag is set this is not required.
*/
- if( needSync
- && 0==(sqlite3OsDeviceCharacteristics(pMaster)&SQLITE_IOCAP_SEQUENTIAL)
+ if( 0==(sqlite3OsDeviceCharacteristics(pMaster)&SQLITE_IOCAP_SEQUENTIAL)
&& SQLITE_OK!=(rc = sqlite3OsSync(pMaster, SQLITE_SYNC_NORMAL))
){
sqlite3OsCloseFree(pMaster);
** doing this the directory is synced again before any individual
** transaction files are deleted.
*/
- rc = sqlite3OsDelete(pVfs, zMaster, needSync);
+ rc = sqlite3OsDelete(pVfs, zMaster, 1);
sqlite3DbFree(db, zMaster);
zMaster = 0;
if( rc ){
** If an IO error occurs, an SQLITE_IOERR_XXX error code is returned.
** Otherwise SQLITE_OK.
*/
-SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *p, int eOp){
+static SQLITE_NOINLINE int vdbeCloseStatement(Vdbe *p, int eOp){
sqlite3 *const db = p->db;
int rc = SQLITE_OK;
+ int i;
+ const int iSavepoint = p->iStatement-1;
- /* If p->iStatement is greater than zero, then this Vdbe opened a
- ** statement transaction that should be closed here. The only exception
- ** is that an IO error may have occurred, causing an emergency rollback.
- ** In this case (db->nStatement==0), and there is nothing to do.
- */
- if( db->nStatement && p->iStatement ){
- int i;
- const int iSavepoint = p->iStatement-1;
-
- assert( eOp==SAVEPOINT_ROLLBACK || eOp==SAVEPOINT_RELEASE);
- assert( db->nStatement>0 );
- assert( p->iStatement==(db->nStatement+db->nSavepoint) );
-
- for(i=0; i<db->nDb; i++){
- int rc2 = SQLITE_OK;
- Btree *pBt = db->aDb[i].pBt;
- if( pBt ){
- if( eOp==SAVEPOINT_ROLLBACK ){
- rc2 = sqlite3BtreeSavepoint(pBt, SAVEPOINT_ROLLBACK, iSavepoint);
- }
- if( rc2==SQLITE_OK ){
- rc2 = sqlite3BtreeSavepoint(pBt, SAVEPOINT_RELEASE, iSavepoint);
- }
- if( rc==SQLITE_OK ){
- rc = rc2;
- }
- }
- }
- db->nStatement--;
- p->iStatement = 0;
+ assert( eOp==SAVEPOINT_ROLLBACK || eOp==SAVEPOINT_RELEASE);
+ assert( db->nStatement>0 );
+ assert( p->iStatement==(db->nStatement+db->nSavepoint) );
- if( rc==SQLITE_OK ){
+ for(i=0; i<db->nDb; i++){
+ int rc2 = SQLITE_OK;
+ Btree *pBt = db->aDb[i].pBt;
+ if( pBt ){
if( eOp==SAVEPOINT_ROLLBACK ){
- rc = sqlite3VtabSavepoint(db, SAVEPOINT_ROLLBACK, iSavepoint);
+ rc2 = sqlite3BtreeSavepoint(pBt, SAVEPOINT_ROLLBACK, iSavepoint);
+ }
+ if( rc2==SQLITE_OK ){
+ rc2 = sqlite3BtreeSavepoint(pBt, SAVEPOINT_RELEASE, iSavepoint);
}
if( rc==SQLITE_OK ){
- rc = sqlite3VtabSavepoint(db, SAVEPOINT_RELEASE, iSavepoint);
+ rc = rc2;
}
}
+ }
+ db->nStatement--;
+ p->iStatement = 0;
- /* If the statement transaction is being rolled back, also restore the
- ** database handles deferred constraint counter to the value it had when
- ** the statement transaction was opened. */
+ if( rc==SQLITE_OK ){
if( eOp==SAVEPOINT_ROLLBACK ){
- db->nDeferredCons = p->nStmtDefCons;
- db->nDeferredImmCons = p->nStmtDefImmCons;
+ rc = sqlite3VtabSavepoint(db, SAVEPOINT_ROLLBACK, iSavepoint);
}
+ if( rc==SQLITE_OK ){
+ rc = sqlite3VtabSavepoint(db, SAVEPOINT_RELEASE, iSavepoint);
+ }
+ }
+
+ /* If the statement transaction is being rolled back, also restore the
+ ** database handles deferred constraint counter to the value it had when
+ ** the statement transaction was opened. */
+ if( eOp==SAVEPOINT_ROLLBACK ){
+ db->nDeferredCons = p->nStmtDefCons;
+ db->nDeferredImmCons = p->nStmtDefImmCons;
}
return rc;
}
+SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *p, int eOp){
+ if( p->db->nStatement && p->iStatement ){
+ return vdbeCloseStatement(p, eOp);
+ }
+ return SQLITE_OK;
+}
+
/*
** This function is called when a transaction opened by the database
** one, or the complete transaction if there is no statement transaction.
*/
- if( p->db->mallocFailed ){
- p->rc = SQLITE_NOMEM;
- }
- if( p->aOnceFlag ) memset(p->aOnceFlag, 0, p->nOnceFlag);
- closeAllCursors(p);
if( p->magic!=VDBE_MAGIC_RUN ){
return SQLITE_OK;
}
+ if( db->mallocFailed ){
+ p->rc = SQLITE_NOMEM_BKPT;
+ }
+ closeAllCursors(p);
checkActiveVdbeCnt(db);
/* No commit or rollback needed if the program never started or if the
}
p->magic = VDBE_MAGIC_HALT;
checkActiveVdbeCnt(db);
- if( p->db->mallocFailed ){
- p->rc = SQLITE_NOMEM;
+ if( db->mallocFailed ){
+ p->rc = SQLITE_NOMEM_BKPT;
}
/* If the auto-commit flag is set to true, then any locks that were held
sqlite3 *db = p->db;
int rc = p->rc;
if( p->zErrMsg ){
- u8 mallocFailed = db->mallocFailed;
+ db->bBenignMalloc++;
sqlite3BeginBenignMalloc();
if( db->pErr==0 ) db->pErr = sqlite3ValueNew(db);
sqlite3ValueSetStr(db->pErr, -1, p->zErrMsg, SQLITE_UTF8, SQLITE_TRANSIENT);
sqlite3EndBenignMalloc();
- db->mallocFailed = mallocFailed;
- db->errCode = rc;
- }else{
- sqlite3Error(db, rc);
+ db->bBenignMalloc--;
+ }else if( db->pErr ){
+ sqlite3ValueSetNull(db->pErr);
}
+ db->errCode = rc;
return rc;
}
** VDBE_MAGIC_INIT.
*/
SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){
+#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
+ int i;
+#endif
+
sqlite3 *db;
db = p->db;
if( p->pc>=0 ){
vdbeInvokeSqllog(p);
sqlite3VdbeTransferError(p);
- sqlite3DbFree(db, p->zErrMsg);
- p->zErrMsg = 0;
if( p->runOnlyOnce ) p->expired = 1;
}else if( p->rc && p->expired ){
/* The expired flag was set on the VDBE before the first call
** called), set the database error in this case as well.
*/
sqlite3ErrorWithMsg(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg);
- sqlite3DbFree(db, p->zErrMsg);
- p->zErrMsg = 0;
}
- /* Reclaim all memory used by the VDBE
+ /* Reset register contents and reclaim error message memory.
*/
- Cleanup(p);
+#ifdef SQLITE_DEBUG
+ /* Execute assert() statements to ensure that the Vdbe.apCsr[] and
+ ** Vdbe.aMem[] arrays have already been cleaned up. */
+ if( p->apCsr ) for(i=0; i<p->nCursor; i++) assert( p->apCsr[i]==0 );
+ if( p->aMem ){
+ for(i=0; i<p->nMem; i++) assert( p->aMem[i].flags==MEM_Undefined );
+ }
+#endif
+ sqlite3DbFree(db, p->zErrMsg);
+ p->zErrMsg = 0;
+ p->pResultSet = 0;
/* Save profiling information from this VDBE run.
*/
{
FILE *out = fopen("vdbe_profile.out", "a");
if( out ){
- int i;
fprintf(out, "---- ");
for(i=0; i<p->nOp; i++){
fprintf(out, "%02x", p->aOp[i].opcode);
}
}
#endif
- p->iCurrentTime = 0;
- p->magic = VDBE_MAGIC_INIT;
+ p->magic = VDBE_MAGIC_RESET;
return p->rc & db->errMask;
}
** * the corresponding bit in argument mask is clear (where the first
** function parameter corresponds to bit 0 etc.).
*/
-SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(Vdbe *pVdbe, int iOp, int mask){
- AuxData **pp = &pVdbe->pAuxData;
+SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3 *db, AuxData **pp, int iOp, int mask){
while( *pp ){
AuxData *pAux = *pp;
if( (iOp<0)
- || (pAux->iOp==iOp && (pAux->iArg>31 || !(mask & MASKBIT32(pAux->iArg))))
+ || (pAux->iAuxOp==iOp
+ && pAux->iAuxArg>=0
+ && (pAux->iAuxArg>31 || !(mask & MASKBIT32(pAux->iAuxArg))))
){
- testcase( pAux->iArg==31 );
- if( pAux->xDelete ){
- pAux->xDelete(pAux->pAux);
+ testcase( pAux->iAuxArg==31 );
+ if( pAux->xDeleteAux ){
+ pAux->xDeleteAux(pAux->pAux);
}
- *pp = pAux->pNext;
- sqlite3DbFree(pVdbe->db, pAux);
+ *pp = pAux->pNextAux;
+ sqlite3DbFree(db, pAux);
}else{
- pp= &pAux->pNext;
+ pp= &pAux->pNextAux;
}
}
}
*/
SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3 *db, Vdbe *p){
SubProgram *pSub, *pNext;
- int i;
assert( p->db==0 || p->db==db );
- releaseMemArray(p->aVar, p->nVar);
releaseMemArray(p->aColName, p->nResColumn*COLNAME_N);
for(pSub=p->pProgram; pSub; pSub=pNext){
pNext = pSub->pNext;
vdbeFreeOpArray(db, pSub->aOp, pSub->nOp);
sqlite3DbFree(db, pSub);
}
- for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]);
+ if( p->magic!=VDBE_MAGIC_INIT ){
+ releaseMemArray(p->aVar, p->nVar);
+ sqlite3DbFree(db, p->pVList);
+ sqlite3DbFree(db, p->pFree);
+ }
vdbeFreeOpArray(db, p->aOp, p->nOp);
sqlite3DbFree(db, p->aColName);
sqlite3DbFree(db, p->zSql);
- sqlite3DbFree(db, p->pFree);
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
- for(i=0; i<p->nScan; i++){
- sqlite3DbFree(db, p->aScan[i].zName);
+ {
+ int i;
+ for(i=0; i<p->nScan; i++){
+ sqlite3DbFree(db, p->aScan[i].zName);
+ }
+ sqlite3DbFree(db, p->aScan);
}
- sqlite3DbFree(db, p->aScan);
#endif
}
SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe *p){
sqlite3 *db;
- if( NEVER(p==0) ) return;
+ assert( p!=0 );
db = p->db;
assert( sqlite3_mutex_held(db->mutex) );
sqlite3VdbeClearObject(db, p);
}
p->magic = VDBE_MAGIC_DEAD;
p->db = 0;
- sqlite3DbFree(db, p);
+ sqlite3DbFreeNN(db, p);
}
/*
#endif
assert( p->deferredMoveto );
assert( p->isTable );
- rc = sqlite3BtreeMovetoUnpacked(p->pCursor, 0, p->movetoTarget, 0, &res);
+ assert( p->eCurType==CURTYPE_BTREE );
+ rc = sqlite3BtreeMovetoUnpacked(p->uc.pCursor, 0, p->movetoTarget, 0, &res);
if( rc ) return rc;
if( res!=0 ) return SQLITE_CORRUPT_BKPT;
#ifdef SQLITE_TEST
*/
static int SQLITE_NOINLINE handleMovedCursor(VdbeCursor *p){
int isDifferentRow, rc;
- assert( p->pCursor!=0 );
- assert( sqlite3BtreeCursorHasMoved(p->pCursor) );
- rc = sqlite3BtreeCursorRestore(p->pCursor, &isDifferentRow);
+ assert( p->eCurType==CURTYPE_BTREE );
+ assert( p->uc.pCursor!=0 );
+ assert( sqlite3BtreeCursorHasMoved(p->uc.pCursor) );
+ rc = sqlite3BtreeCursorRestore(p->uc.pCursor, &isDifferentRow);
p->cacheStatus = CACHE_STALE;
if( isDifferentRow ) p->nullRow = 1;
return rc;
** if need be. Return any I/O error from the restore operation.
*/
SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor *p){
- if( sqlite3BtreeCursorHasMoved(p->pCursor) ){
+ assert( p->eCurType==CURTYPE_BTREE );
+ if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){
return handleMovedCursor(p);
}
return SQLITE_OK;
** If the cursor is already pointing to the correct row and that row has
** not been deleted out from under the cursor, then this routine is a no-op.
*/
-SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor *p){
+SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor **pp, int *piCol){
+ VdbeCursor *p = *pp;
+ assert( p->eCurType==CURTYPE_BTREE || p->eCurType==CURTYPE_PSEUDO );
if( p->deferredMoveto ){
+ int iMap;
+ if( p->aAltMap && (iMap = p->aAltMap[1+*piCol])>0 ){
+ *pp = p->pAltCursor;
+ *piCol = iMap - 1;
+ return SQLITE_OK;
+ }
return handleDeferredMoveto(p);
}
- if( p->pCursor && sqlite3BtreeCursorHasMoved(p->pCursor) ){
+ if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){
return handleMovedCursor(p);
}
return SQLITE_OK;
/*
** Return the serial-type for the value stored in pMem.
*/
-SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem *pMem, int file_format){
+SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem *pMem, int file_format, u32 *pLen){
int flags = pMem->flags;
u32 n;
+ assert( pLen!=0 );
if( flags&MEM_Null ){
+ *pLen = 0;
return 0;
}
if( flags&MEM_Int ){
u = i;
}
if( u<=127 ){
- return ((i&1)==i && file_format>=4) ? 8+(u32)u : 1;
+ if( (i&1)==i && file_format>=4 ){
+ *pLen = 0;
+ return 8+(u32)u;
+ }else{
+ *pLen = 1;
+ return 1;
+ }
}
- if( u<=32767 ) return 2;
- if( u<=8388607 ) return 3;
- if( u<=2147483647 ) return 4;
- if( u<=MAX_6BYTE ) return 5;
+ if( u<=32767 ){ *pLen = 2; return 2; }
+ if( u<=8388607 ){ *pLen = 3; return 3; }
+ if( u<=2147483647 ){ *pLen = 4; return 4; }
+ if( u<=MAX_6BYTE ){ *pLen = 6; return 5; }
+ *pLen = 8;
return 6;
}
if( flags&MEM_Real ){
+ *pLen = 8;
return 7;
}
assert( pMem->db->mallocFailed || flags&(MEM_Str|MEM_Blob) );
if( flags & MEM_Zero ){
n += pMem->u.nZero;
}
+ *pLen = n;
return ((n*2) + 12 + ((flags&MEM_Str)!=0));
}
/*
-** The sizes for serial types less than 12
+** The sizes for serial types less than 128
*/
static const u8 sqlite3SmallTypeSizes[] = {
- 0, 1, 2, 3, 4, 6, 8, 8, 0, 0, 0, 0
+ /* 0 1 2 3 4 5 6 7 8 9 */
+/* 0 */ 0, 1, 2, 3, 4, 6, 8, 8, 0, 0,
+/* 10 */ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3,
+/* 20 */ 4, 4, 5, 5, 6, 6, 7, 7, 8, 8,
+/* 30 */ 9, 9, 10, 10, 11, 11, 12, 12, 13, 13,
+/* 40 */ 14, 14, 15, 15, 16, 16, 17, 17, 18, 18,
+/* 50 */ 19, 19, 20, 20, 21, 21, 22, 22, 23, 23,
+/* 60 */ 24, 24, 25, 25, 26, 26, 27, 27, 28, 28,
+/* 70 */ 29, 29, 30, 30, 31, 31, 32, 32, 33, 33,
+/* 80 */ 34, 34, 35, 35, 36, 36, 37, 37, 38, 38,
+/* 90 */ 39, 39, 40, 40, 41, 41, 42, 42, 43, 43,
+/* 100 */ 44, 44, 45, 45, 46, 46, 47, 47, 48, 48,
+/* 110 */ 49, 49, 50, 50, 51, 51, 52, 52, 53, 53,
+/* 120 */ 54, 54, 55, 55, 56, 56, 57, 57
};
/*
** Return the length of the data corresponding to the supplied serial-type.
*/
SQLITE_PRIVATE u32 sqlite3VdbeSerialTypeLen(u32 serial_type){
- if( serial_type>=12 ){
+ if( serial_type>=128 ){
return (serial_type-12)/2;
}else{
+ assert( serial_type<12
+ || sqlite3SmallTypeSizes[serial_type]==(serial_type - 12)/2 );
return sqlite3SmallTypeSizes[serial_type];
}
}
+SQLITE_PRIVATE u8 sqlite3VdbeOneByteSerialTypeLen(u8 serial_type){
+ assert( serial_type<128 );
+ return sqlite3SmallTypeSizes[serial_type];
+}
/*
** If we are on an architecture with mixed-endian floating
assert( pMem->n + ((pMem->flags & MEM_Zero)?pMem->u.nZero:0)
== (int)sqlite3VdbeSerialTypeLen(serial_type) );
len = pMem->n;
- memcpy(buf, pMem->z, len);
+ if( len>0 ) memcpy(buf, pMem->z, len);
return len;
}
Mem *pMem /* Memory cell to write value into */
){
switch( serial_type ){
- case 10: /* Reserved for future use */
+ case 10: { /* Internal use only: NULL with virtual table
+ ** UPDATE no-change flag set */
+ pMem->flags = MEM_Null|MEM_Zero;
+ pMem->n = 0;
+ pMem->u.nZero = 0;
+ break;
+ }
case 11: /* Reserved for future use */
case 0: { /* Null */
/* EVIDENCE-OF: R-24078-09375 Value is a NULL. */
/* EVIDENCE-OF: R-01849-26079 Value is a big-endian 32-bit
** twos-complement integer. */
pMem->u.i = FOUR_BYTE_INT(buf);
+#ifdef __HP_cc
+ /* Work around a sign-extension bug in the HP compiler for HP/UX */
+ if( buf[0]&0x80 ) pMem->u.i |= 0xffffffff80000000LL;
+#endif
pMem->flags = MEM_Int;
testcase( pMem->u.i<0 );
return 4;
** If an OOM error occurs, NULL is returned.
*/
SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(
- KeyInfo *pKeyInfo, /* Description of the record */
- char *pSpace, /* Unaligned space available */
- int szSpace, /* Size of pSpace[] in bytes */
- char **ppFree /* OUT: Caller should free this pointer */
+ KeyInfo *pKeyInfo /* Description of the record */
){
UnpackedRecord *p; /* Unpacked record to return */
- int nOff; /* Increment pSpace by nOff to align it */
int nByte; /* Number of bytes required for *p */
-
- /* We want to shift the pointer pSpace up such that it is 8-byte aligned.
- ** Thus, we need to calculate a value, nOff, between 0 and 7, to shift
- ** it by. If pSpace is already 8-byte aligned, nOff should be zero.
- */
- nOff = (8 - (SQLITE_PTR_TO_INT(pSpace) & 7)) & 7;
- nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nField+1);
- if( nByte>szSpace+nOff ){
- p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte);
- *ppFree = (char *)p;
- if( !p ) return 0;
- }else{
- p = (UnpackedRecord*)&pSpace[nOff];
- *ppFree = 0;
- }
-
+ nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nKeyField+1);
+ p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte);
+ if( !p ) return 0;
p->aMem = (Mem*)&((char*)p)[ROUND8(sizeof(UnpackedRecord))];
assert( pKeyInfo->aSortOrder!=0 );
p->pKeyInfo = pKeyInfo;
- p->nField = pKeyInfo->nField + 1;
+ p->nField = pKeyInfo->nKeyField + 1;
return p;
}
pMem->db = pKeyInfo->db;
/* pMem->flags = 0; // sqlite3VdbeSerialGet() will set this for us */
pMem->szMalloc = 0;
+ pMem->z = 0;
d += sqlite3VdbeSerialGet(&aKey[d], serial_type, pMem);
pMem++;
if( (++u)>=p->nField ) break;
}
- assert( u<=pKeyInfo->nField + 1 );
+ assert( u<=pKeyInfo->nKeyField + 1 );
p->nField = u;
}
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
/*
** This function compares two index or table record keys in the same way
** as the sqlite3VdbeRecordCompare() routine. Unlike VdbeRecordCompare(),
idx1 = getVarint32(aKey1, szHdr1);
if( szHdr1>98307 ) return SQLITE_CORRUPT;
d1 = szHdr1;
- assert( pKeyInfo->nField+pKeyInfo->nXField>=pPKey2->nField || CORRUPT_DB );
+ assert( pKeyInfo->nAllField>=pPKey2->nField || CORRUPT_DB );
assert( pKeyInfo->aSortOrder!=0 );
- assert( pKeyInfo->nField>0 );
+ assert( pKeyInfo->nKeyField>0 );
assert( idx1<=szHdr1 || CORRUPT_DB );
do{
u32 serial_type1;
}
#endif
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
/*
** Count the number of fields (a.k.a. columns) in the record given by
** pKey,nKey. The verify that this count is less than or equal to the
-** limit given by pKeyInfo->nField + pKeyInfo->nXField.
+** limit given by pKeyInfo->nAllField.
**
** If this constraint is not satisfied, it means that the high-speed
** vdbeRecordCompareInt() and vdbeRecordCompareString() routines will
** not work correctly. If this assert() ever fires, it probably means
-** that the KeyInfo.nField or KeyInfo.nXField values were computed
+** that the KeyInfo.nKeyField or KeyInfo.nAllField values were computed
** incorrectly.
*/
static void vdbeAssertFieldCountWithinLimits(
idx += getVarint32(aKey+idx, notUsed);
nField++;
}
- assert( nField <= pKeyInfo->nField+pKeyInfo->nXField );
+ assert( nField <= pKeyInfo->nAllField );
}
#else
# define vdbeAssertFieldCountWithinLimits(A,B,C)
}else{
int rc;
const void *v1, *v2;
- int n1, n2;
Mem c1;
Mem c2;
sqlite3VdbeMemInit(&c1, pMem1->db, MEM_Null);
sqlite3VdbeMemShallowCopy(&c1, pMem1, MEM_Ephem);
sqlite3VdbeMemShallowCopy(&c2, pMem2, MEM_Ephem);
v1 = sqlite3ValueText((sqlite3_value*)&c1, pColl->enc);
- n1 = v1==0 ? 0 : c1.n;
v2 = sqlite3ValueText((sqlite3_value*)&c2, pColl->enc);
- n2 = v2==0 ? 0 : c2.n;
- rc = pColl->xCmp(pColl->pUser, n1, v1, n2, v2);
+ if( (v1==0 || v2==0) ){
+ if( prcErr ) *prcErr = SQLITE_NOMEM_BKPT;
+ rc = 0;
+ }else{
+ rc = pColl->xCmp(pColl->pUser, c1.n, v1, c2.n, v2);
+ }
sqlite3VdbeMemRelease(&c1);
sqlite3VdbeMemRelease(&c2);
- if( (v1==0 || v2==0) && prcErr ) *prcErr = SQLITE_NOMEM;
return rc;
}
}
+/*
+** The input pBlob is guaranteed to be a Blob that is not marked
+** with MEM_Zero. Return true if it could be a zero-blob.
+*/
+static int isAllZero(const char *z, int n){
+ int i;
+ for(i=0; i<n; i++){
+ if( z[i] ) return 0;
+ }
+ return 1;
+}
+
/*
** Compare two blobs. Return negative, zero, or positive if the first
** is less than, equal to, or greater than the second, respectively.
** If one blob is a prefix of the other, then the shorter is the lessor.
*/
static SQLITE_NOINLINE int sqlite3BlobCompare(const Mem *pB1, const Mem *pB2){
- int c = memcmp(pB1->z, pB2->z, pB1->n>pB2->n ? pB2->n : pB1->n);
+ int c;
+ int n1 = pB1->n;
+ int n2 = pB2->n;
+
+ /* It is possible to have a Blob value that has some non-zero content
+ ** followed by zero content. But that only comes up for Blobs formed
+ ** by the OP_MakeRecord opcode, and such Blobs never get passed into
+ ** sqlite3MemCompare(). */
+ assert( (pB1->flags & MEM_Zero)==0 || n1==0 );
+ assert( (pB2->flags & MEM_Zero)==0 || n2==0 );
+
+ if( (pB1->flags|pB2->flags) & MEM_Zero ){
+ if( pB1->flags & pB2->flags & MEM_Zero ){
+ return pB1->u.nZero - pB2->u.nZero;
+ }else if( pB1->flags & MEM_Zero ){
+ if( !isAllZero(pB2->z, pB2->n) ) return -1;
+ return pB1->u.nZero - n2;
+ }else{
+ if( !isAllZero(pB1->z, pB1->n) ) return +1;
+ return n1 - pB2->u.nZero;
+ }
+ }
+ c = memcmp(pB1->z, pB2->z, n1>n2 ? n2 : n1);
if( c ) return c;
- return pB1->n - pB2->n;
+ return n1 - n2;
}
+/*
+** Do a comparison between a 64-bit signed integer and a 64-bit floating-point
+** number. Return negative, zero, or positive if the first (i64) is less than,
+** equal to, or greater than the second (double).
+*/
+static int sqlite3IntFloatCompare(i64 i, double r){
+ if( sizeof(LONGDOUBLE_TYPE)>8 ){
+ LONGDOUBLE_TYPE x = (LONGDOUBLE_TYPE)i;
+ if( x<r ) return -1;
+ if( x>r ) return +1;
+ return 0;
+ }else{
+ i64 y;
+ double s;
+ if( r<-9223372036854775808.0 ) return +1;
+ if( r>9223372036854775807.0 ) return -1;
+ y = (i64)r;
+ if( i<y ) return -1;
+ if( i>y ){
+ if( y==SMALLEST_INT64 && r>0.0 ) return -1;
+ return +1;
+ }
+ s = (double)i;
+ if( s<r ) return -1;
+ if( s>r ) return +1;
+ return 0;
+ }
+}
/*
** Compare the values contained by the two memory cells, returning
return (f2&MEM_Null) - (f1&MEM_Null);
}
- /* If one value is a number and the other is not, the number is less.
- ** If both are numbers, compare as reals if one is a real, or as integers
- ** if both values are integers.
+ /* At least one of the two values is a number
*/
if( combined_flags&(MEM_Int|MEM_Real) ){
- double r1, r2;
if( (f1 & f2 & MEM_Int)!=0 ){
if( pMem1->u.i < pMem2->u.i ) return -1;
- if( pMem1->u.i > pMem2->u.i ) return 1;
+ if( pMem1->u.i > pMem2->u.i ) return +1;
return 0;
}
- if( (f1&MEM_Real)!=0 ){
- r1 = pMem1->u.r;
- }else if( (f1&MEM_Int)!=0 ){
- r1 = (double)pMem1->u.i;
- }else{
- return 1;
+ if( (f1 & f2 & MEM_Real)!=0 ){
+ if( pMem1->u.r < pMem2->u.r ) return -1;
+ if( pMem1->u.r > pMem2->u.r ) return +1;
+ return 0;
}
- if( (f2&MEM_Real)!=0 ){
- r2 = pMem2->u.r;
- }else if( (f2&MEM_Int)!=0 ){
- r2 = (double)pMem2->u.i;
- }else{
- return -1;
+ if( (f1&MEM_Int)!=0 ){
+ if( (f2&MEM_Real)!=0 ){
+ return sqlite3IntFloatCompare(pMem1->u.i, pMem2->u.r);
+ }else{
+ return -1;
+ }
}
- if( r1<r2 ) return -1;
- if( r1>r2 ) return 1;
- return 0;
+ if( (f1&MEM_Real)!=0 ){
+ if( (f2&MEM_Int)!=0 ){
+ return -sqlite3IntFloatCompare(pMem2->u.i, pMem1->u.r);
+ }else{
+ return -1;
+ }
+ }
+ return +1;
}
/* If one value is a string and the other is a blob, the string is less.
return -1;
}
- assert( pMem1->enc==pMem2->enc );
+ assert( pMem1->enc==pMem2->enc || pMem1->db->mallocFailed );
assert( pMem1->enc==SQLITE_UTF8 ||
pMem1->enc==SQLITE_UTF16LE || pMem1->enc==SQLITE_UTF16BE );
}
VVA_ONLY( mem1.szMalloc = 0; ) /* Only needed by assert() statements */
- assert( pPKey2->pKeyInfo->nField+pPKey2->pKeyInfo->nXField>=pPKey2->nField
+ assert( pPKey2->pKeyInfo->nAllField>=pPKey2->nField
|| CORRUPT_DB );
assert( pPKey2->pKeyInfo->aSortOrder!=0 );
- assert( pPKey2->pKeyInfo->nField>0 );
+ assert( pPKey2->pKeyInfo->nKeyField>0 );
assert( idx1<=szHdr1 || CORRUPT_DB );
do{
u32 serial_type;
}else if( serial_type==0 ){
rc = -1;
}else if( serial_type==7 ){
- double rhs = (double)pRhs->u.i;
sqlite3VdbeSerialGet(&aKey1[d1], serial_type, &mem1);
- if( mem1.u.r<rhs ){
- rc = -1;
- }else if( mem1.u.r>rhs ){
- rc = +1;
- }
+ rc = -sqlite3IntFloatCompare(pRhs->u.i, mem1.u.r);
}else{
i64 lhs = vdbeRecordDecodeInt(serial_type, &aKey1[d1]);
i64 rhs = pRhs->u.i;
}else if( serial_type==0 ){
rc = -1;
}else{
- double rhs = pRhs->u.r;
- double lhs;
sqlite3VdbeSerialGet(&aKey1[d1], serial_type, &mem1);
if( serial_type==7 ){
- lhs = mem1.u.r;
+ if( mem1.u.r<pRhs->u.r ){
+ rc = -1;
+ }else if( mem1.u.r>pRhs->u.r ){
+ rc = +1;
+ }
}else{
- lhs = (double)mem1.u.i;
- }
- if( lhs<rhs ){
- rc = -1;
- }else if( lhs>rhs ){
- rc = +1;
+ rc = sqlite3IntFloatCompare(mem1.u.i, pRhs->u.r);
}
}
}
/* RHS is a blob */
else if( pRhs->flags & MEM_Blob ){
+ assert( (pRhs->flags & MEM_Zero)==0 || pRhs->n==0 );
getVarint32(&aKey1[idx1], serial_type);
testcase( serial_type==12 );
if( serial_type<12 || (serial_type & 0x01) ){
if( (d1+nStr) > (unsigned)nKey1 ){
pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT;
return 0; /* Corruption */
+ }else if( pRhs->flags & MEM_Zero ){
+ if( !isAllZero((const char*)&aKey1[d1],nStr) ){
+ rc = 1;
+ }else{
+ rc = nStr - pRhs->u.nZero;
+ }
}else{
int nCmp = MIN(nStr, pRhs->n);
rc = memcmp(&aKey1[d1], pRhs->z, nCmp);
|| vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, pPKey2->default_rc)
|| pKeyInfo->db->mallocFailed
);
+ pPKey2->eqSeen = 1;
return pPKey2->default_rc;
}
SQLITE_PRIVATE int sqlite3VdbeRecordCompare(
int res;
u32 y;
u64 x;
- i64 v = pPKey2->aMem[0].u.i;
+ i64 v;
i64 lhs;
vdbeAssertFieldCountWithinLimits(nKey1, pKey1, pPKey2->pKeyInfo);
return sqlite3VdbeRecordCompare(nKey1, pKey1, pPKey2);
}
+ v = pPKey2->aMem[0].u.i;
if( v>lhs ){
res = pPKey2->r1;
}else if( v<lhs ){
/* The first fields of the two keys are equal and there are no trailing
** fields. Return pPKey2->default_rc in this case. */
res = pPKey2->default_rc;
+ pPKey2->eqSeen = 1;
}
assert( vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, res) );
int serial_type;
int res;
+ assert( pPKey2->aMem[0].flags & MEM_Str );
vdbeAssertFieldCountWithinLimits(nKey1, pKey1, pPKey2->pKeyInfo);
getVarint32(&aKey1[1], serial_type);
if( serial_type<12 ){
res = sqlite3VdbeRecordCompareWithSkip(nKey1, pKey1, pPKey2, 1);
}else{
res = pPKey2->default_rc;
+ pPKey2->eqSeen = 1;
}
}else if( res>0 ){
res = pPKey2->r2;
** The easiest way to enforce this limit is to consider only records with
** 13 fields or less. If the first field is an integer, the maximum legal
** header size is (12*5 + 1 + 1) bytes. */
- if( (p->pKeyInfo->nField + p->pKeyInfo->nXField)<=13 ){
+ if( p->pKeyInfo->nAllField<=13 ){
int flags = p->aMem[0].flags;
if( p->pKeyInfo->aSortOrder[0] ){
p->r1 = 1;
** this code can safely assume that nCellKey is 32-bits
*/
assert( sqlite3BtreeCursorIsValid(pCur) );
- VVA_ONLY(rc =) sqlite3BtreeKeySize(pCur, &nCellKey);
- assert( rc==SQLITE_OK ); /* pCur is always valid so KeySize cannot fail */
+ nCellKey = sqlite3BtreePayloadSize(pCur);
assert( (nCellKey & SQLITE_MAX_U32)==(u64)nCellKey );
/* Read in the complete content of the index entry */
sqlite3VdbeMemInit(&m, db, 0);
- rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, 1, &m);
+ rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, &m);
if( rc ){
return rc;
}
){
i64 nCellKey = 0;
int rc;
- BtCursor *pCur = pC->pCursor;
+ BtCursor *pCur;
Mem m;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ pCur = pC->uc.pCursor;
assert( sqlite3BtreeCursorIsValid(pCur) );
- VVA_ONLY(rc =) sqlite3BtreeKeySize(pCur, &nCellKey);
- assert( rc==SQLITE_OK ); /* pCur is always valid so KeySize cannot fail */
+ nCellKey = sqlite3BtreePayloadSize(pCur);
/* nCellKey will always be between 0 and 0xffffffff because of the way
** that btreeParseCellPtr() and sqlite3GetVarint32() are implemented */
if( nCellKey<=0 || nCellKey>0x7fffffff ){
return SQLITE_CORRUPT_BKPT;
}
sqlite3VdbeMemInit(&m, db, 0);
- rc = sqlite3VdbeMemFromBtree(pC->pCursor, 0, (u32)nCellKey, 1, &m);
+ rc = sqlite3VdbeMemFromBtree(pCur, 0, (u32)nCellKey, &m);
if( rc ){
return rc;
}
return v->db;
}
+/*
+** Return the SQLITE_PREPARE flags for a Vdbe.
+*/
+SQLITE_PRIVATE u8 sqlite3VdbePrepareFlags(Vdbe *v){
+ return v->prepFlags;
+}
+
/*
** Return a pointer to an sqlite3_value structure containing the value bound
** parameter iVar of VM v. Except, if the value is an SQL NULL, return
assert( iVar>0 );
if( v ){
Mem *pMem = &v->aVar[iVar-1];
+ assert( (v->db->flags & SQLITE_EnableQPSG)==0 );
if( 0==(pMem->flags & MEM_Null) ){
sqlite3_value *pRet = sqlite3ValueNew(v->db);
if( pRet ){
*/
SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe *v, int iVar){
assert( iVar>0 );
- if( iVar>32 ){
- v->expmask = 0xffffffff;
+ assert( (v->db->flags & SQLITE_EnableQPSG)==0 );
+ if( iVar>=32 ){
+ v->expmask |= 0x80000000;
}else{
v->expmask |= ((u32)1 << (iVar-1));
}
}
+/*
+** Cause a function to throw an error if it was call from OP_PureFunc
+** rather than OP_Function.
+**
+** OP_PureFunc means that the function must be deterministic, and should
+** throw an error if it is given inputs that would make it non-deterministic.
+** This routine is invoked by date/time functions that use non-deterministic
+** features such as 'now'.
+*/
+SQLITE_PRIVATE int sqlite3NotPureFunc(sqlite3_context *pCtx){
+#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
+ if( pCtx->pVdbe==0 ) return 1;
+#endif
+ if( pCtx->pVdbe->aOp[pCtx->iOp].opcode==OP_PureFunc ){
+ sqlite3_result_error(pCtx,
+ "non-deterministic function in index expression or CHECK constraint",
+ -1);
+ return 0;
+ }
+ return 1;
+}
+
#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
** Transfer error message text from an sqlite3_vtab.zErrMsg (text stored
** in memory obtained from sqlite3DbMalloc).
*/
SQLITE_PRIVATE void sqlite3VtabImportErrmsg(Vdbe *p, sqlite3_vtab *pVtab){
- sqlite3 *db = p->db;
- sqlite3DbFree(db, p->zErrMsg);
- p->zErrMsg = sqlite3DbStrDup(db, pVtab->zErrMsg);
- sqlite3_free(pVtab->zErrMsg);
- pVtab->zErrMsg = 0;
+ if( pVtab->zErrMsg ){
+ sqlite3 *db = p->db;
+ sqlite3DbFree(db, p->zErrMsg);
+ p->zErrMsg = sqlite3DbStrDup(db, pVtab->zErrMsg);
+ sqlite3_free(pVtab->zErrMsg);
+ pVtab->zErrMsg = 0;
+ }
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+
+/*
+** If the second argument is not NULL, release any allocations associated
+** with the memory cells in the p->aMem[] array. Also free the UnpackedRecord
+** structure itself, using sqlite3DbFree().
+**
+** This function is used to free UnpackedRecord structures allocated by
+** the vdbeUnpackRecord() function found in vdbeapi.c.
+*/
+static void vdbeFreeUnpacked(sqlite3 *db, int nField, UnpackedRecord *p){
+ if( p ){
+ int i;
+ for(i=0; i<nField; i++){
+ Mem *pMem = &p->aMem[i];
+ if( pMem->zMalloc ) sqlite3VdbeMemRelease(pMem);
+ }
+ sqlite3DbFreeNN(db, p);
+ }
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** Invoke the pre-update hook. If this is an UPDATE or DELETE pre-update call,
+** then cursor passed as the second argument should point to the row about
+** to be update or deleted. If the application calls sqlite3_preupdate_old(),
+** the required value will be read from the row the cursor points to.
+*/
+SQLITE_PRIVATE void sqlite3VdbePreUpdateHook(
+ Vdbe *v, /* Vdbe pre-update hook is invoked by */
+ VdbeCursor *pCsr, /* Cursor to grab old.* values from */
+ int op, /* SQLITE_INSERT, UPDATE or DELETE */
+ const char *zDb, /* Database name */
+ Table *pTab, /* Modified table */
+ i64 iKey1, /* Initial key value */
+ int iReg /* Register for new.* record */
+){
+ sqlite3 *db = v->db;
+ i64 iKey2;
+ PreUpdate preupdate;
+ const char *zTbl = pTab->zName;
+ static const u8 fakeSortOrder = 0;
+
+ assert( db->pPreUpdate==0 );
+ memset(&preupdate, 0, sizeof(PreUpdate));
+ if( HasRowid(pTab)==0 ){
+ iKey1 = iKey2 = 0;
+ preupdate.pPk = sqlite3PrimaryKeyIndex(pTab);
+ }else{
+ if( op==SQLITE_UPDATE ){
+ iKey2 = v->aMem[iReg].u.i;
+ }else{
+ iKey2 = iKey1;
+ }
+ }
+
+ assert( pCsr->nField==pTab->nCol
+ || (pCsr->nField==pTab->nCol+1 && op==SQLITE_DELETE && iReg==-1)
+ );
+
+ preupdate.v = v;
+ preupdate.pCsr = pCsr;
+ preupdate.op = op;
+ preupdate.iNewReg = iReg;
+ preupdate.keyinfo.db = db;
+ preupdate.keyinfo.enc = ENC(db);
+ preupdate.keyinfo.nKeyField = pTab->nCol;
+ preupdate.keyinfo.aSortOrder = (u8*)&fakeSortOrder;
+ preupdate.iKey1 = iKey1;
+ preupdate.iKey2 = iKey2;
+ preupdate.pTab = pTab;
+
+ db->pPreUpdate = &preupdate;
+ db->xPreUpdateCallback(db->pPreUpdateArg, db, op, zDb, zTbl, iKey1, iKey2);
+ db->pPreUpdate = 0;
+ sqlite3DbFree(db, preupdate.aRecord);
+ vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pUnpacked);
+ vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pNewUnpacked);
+ if( preupdate.aNew ){
+ int i;
+ for(i=0; i<pCsr->nField; i++){
+ sqlite3VdbeMemRelease(&preupdate.aNew[i]);
+ }
+ sqlite3DbFreeNN(db, preupdate.aNew);
+ }
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
/************** End of vdbeaux.c *********************************************/
/************** Begin file vdbeapi.c *****************************************/
/*
** collating sequences are registered or if an authorizer function is
** added or changed.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_expired(sqlite3_stmt *pStmt){
Vdbe *p = (Vdbe*)pStmt;
return p==0 || p->expired;
}
*/
static SQLITE_NOINLINE void invokeProfileCallback(sqlite3 *db, Vdbe *p){
sqlite3_int64 iNow;
+ sqlite3_int64 iElapse;
assert( p->startTime>0 );
- assert( db->xProfile!=0 );
+ assert( db->xProfile!=0 || (db->mTrace & SQLITE_TRACE_PROFILE)!=0 );
assert( db->init.busy==0 );
assert( p->zSql!=0 );
sqlite3OsCurrentTimeInt64(db->pVfs, &iNow);
- db->xProfile(db->pProfileArg, p->zSql, (iNow - p->startTime)*1000000);
+ iElapse = (iNow - p->startTime)*1000000;
+ if( db->xProfile ){
+ db->xProfile(db->pProfileArg, p->zSql, iElapse);
+ }
+ if( db->mTrace & SQLITE_TRACE_PROFILE ){
+ db->xTrace(SQLITE_TRACE_PROFILE, db->pTraceArg, p, (void*)&iElapse);
+ }
p->startTime = 0;
}
/*
** This routine sets the error code and string returned by
** sqlite3_errcode(), sqlite3_errmsg() and sqlite3_errmsg16().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt){
int rc;
if( pStmt==0 ){
/* IMPLEMENTATION-OF: R-57228-12904 Invoking sqlite3_finalize() on a NULL
** This routine sets the error code and string returned by
** sqlite3_errcode(), sqlite3_errmsg() and sqlite3_errmsg16().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt){
int rc;
if( pStmt==0 ){
rc = SQLITE_OK;
/*
** Set all the parameters in the compiled SQL statement to NULL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt *pStmt){
int i;
int rc = SQLITE_OK;
Vdbe *p = (Vdbe*)pStmt;
sqlite3VdbeMemRelease(&p->aVar[i]);
p->aVar[i].flags = MEM_Null;
}
- if( p->isPrepareV2 && p->expmask ){
+ assert( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || p->expmask==0 );
+ if( p->expmask ){
p->expired = 1;
}
sqlite3_mutex_leave(mutex);
** The following routines extract information from a Mem or sqlite3_value
** structure.
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value *pVal){
Mem *p = (Mem*)pVal;
if( p->flags & (MEM_Blob|MEM_Str) ){
- if( sqlite3VdbeMemExpandBlob(p)!=SQLITE_OK ){
+ if( ExpandBlob(p)!=SQLITE_OK ){
assert( p->flags==MEM_Null && p->z==0 );
return 0;
}
return sqlite3_value_text(pVal);
}
}
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_bytes(sqlite3_value *pVal){
return sqlite3ValueBytes(pVal, SQLITE_UTF8);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value *pVal){
return sqlite3ValueBytes(pVal, SQLITE_UTF16NATIVE);
}
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value *pVal){
+SQLITE_API double sqlite3_value_double(sqlite3_value *pVal){
return sqlite3VdbeRealValue((Mem*)pVal);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_int(sqlite3_value *pVal){
return (int)sqlite3VdbeIntValue((Mem*)pVal);
}
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value *pVal){
+SQLITE_API sqlite_int64 sqlite3_value_int64(sqlite3_value *pVal){
return sqlite3VdbeIntValue((Mem*)pVal);
}
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value *pVal){
- return ((Mem*)pVal)->eSubtype;
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value *pVal){
+ Mem *pMem = (Mem*)pVal;
+ return ((pMem->flags & MEM_Subtype) ? pMem->eSubtype : 0);
}
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value *pVal){
+SQLITE_API void *sqlite3_value_pointer(sqlite3_value *pVal, const char *zPType){
+ Mem *p = (Mem*)pVal;
+ if( (p->flags&(MEM_TypeMask|MEM_Term|MEM_Subtype)) ==
+ (MEM_Null|MEM_Term|MEM_Subtype)
+ && zPType!=0
+ && p->eSubtype=='p'
+ && strcmp(p->u.zPType, zPType)==0
+ ){
+ return (void*)p->z;
+ }else{
+ return 0;
+ }
+}
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value *pVal){
return (const unsigned char *)sqlite3ValueText(pVal, SQLITE_UTF8);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value* pVal){
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value* pVal){
return sqlite3ValueText(pVal, SQLITE_UTF16NATIVE);
}
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value *pVal){
return sqlite3ValueText(pVal, SQLITE_UTF16BE);
}
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value *pVal){
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value *pVal){
return sqlite3ValueText(pVal, SQLITE_UTF16LE);
}
#endif /* SQLITE_OMIT_UTF16 */
** fundamental datatypes: 64-bit signed integer 64-bit IEEE floating
** point number string BLOB NULL
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value* pVal){
+SQLITE_API int sqlite3_value_type(sqlite3_value* pVal){
static const u8 aType[] = {
SQLITE_BLOB, /* 0x00 */
SQLITE_NULL, /* 0x01 */
return aType[pVal->flags&MEM_AffMask];
}
+/* Return true if a parameter to xUpdate represents an unchanged column */
+SQLITE_API int sqlite3_value_nochange(sqlite3_value *pVal){
+ return (pVal->flags&(MEM_Null|MEM_Zero))==(MEM_Null|MEM_Zero);
+}
+
/* Make a copy of an sqlite3_value object
*/
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value *pOrig){
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value *pOrig){
sqlite3_value *pNew;
if( pOrig==0 ) return 0;
pNew = sqlite3_malloc( sizeof(*pNew) );
/* Destroy an sqlite3_value object previously obtained from
** sqlite3_value_dup().
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value *pOld){
+SQLITE_API void sqlite3_value_free(sqlite3_value *pOld){
sqlite3ValueFree(pOld);
}
if( pCtx ) sqlite3_result_error_toobig(pCtx);
return SQLITE_TOOBIG;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(
+SQLITE_API void sqlite3_result_blob(
sqlite3_context *pCtx,
const void *z,
int n,
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
setResultStrOrError(pCtx, z, n, 0, xDel);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(
+SQLITE_API void sqlite3_result_blob64(
sqlite3_context *pCtx,
const void *z,
sqlite3_uint64 n,
setResultStrOrError(pCtx, z, (int)n, 0, xDel);
}
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context *pCtx, double rVal){
+SQLITE_API void sqlite3_result_double(sqlite3_context *pCtx, double rVal){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetDouble(pCtx->pOut, rVal);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){
+SQLITE_API void sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
pCtx->isError = SQLITE_ERROR;
- pCtx->fErrorOrAux = 1;
sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF8, SQLITE_TRANSIENT);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){
+SQLITE_API void sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
pCtx->isError = SQLITE_ERROR;
- pCtx->fErrorOrAux = 1;
sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT);
}
#endif
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context *pCtx, int iVal){
+SQLITE_API void sqlite3_result_int(sqlite3_context *pCtx, int iVal){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetInt64(pCtx->pOut, (i64)iVal);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context *pCtx, i64 iVal){
+SQLITE_API void sqlite3_result_int64(sqlite3_context *pCtx, i64 iVal){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetInt64(pCtx->pOut, iVal);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_null(sqlite3_context *pCtx){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetNull(pCtx->pOut);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){
- assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
- pCtx->pOut->eSubtype = eSubtype & 0xff;
+SQLITE_API void sqlite3_result_pointer(
+ sqlite3_context *pCtx,
+ void *pPtr,
+ const char *zPType,
+ void (*xDestructor)(void*)
+){
+ Mem *pOut = pCtx->pOut;
+ assert( sqlite3_mutex_held(pOut->db->mutex) );
+ sqlite3VdbeMemRelease(pOut);
+ pOut->flags = MEM_Null;
+ sqlite3VdbeMemSetPointer(pOut, pPtr, zPType, xDestructor);
+}
+SQLITE_API void sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){
+ Mem *pOut = pCtx->pOut;
+ assert( sqlite3_mutex_held(pOut->db->mutex) );
+ pOut->eSubtype = eSubtype & 0xff;
+ pOut->flags |= MEM_Subtype;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(
+SQLITE_API void sqlite3_result_text(
sqlite3_context *pCtx,
const char *z,
int n,
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
setResultStrOrError(pCtx, z, n, SQLITE_UTF8, xDel);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(
+SQLITE_API void sqlite3_result_text64(
sqlite3_context *pCtx,
const char *z,
sqlite3_uint64 n,
}
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(
+SQLITE_API void sqlite3_result_text16(
sqlite3_context *pCtx,
const void *z,
int n,
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
setResultStrOrError(pCtx, z, n, SQLITE_UTF16NATIVE, xDel);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(
+SQLITE_API void sqlite3_result_text16be(
sqlite3_context *pCtx,
const void *z,
int n,
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
setResultStrOrError(pCtx, z, n, SQLITE_UTF16BE, xDel);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(
+SQLITE_API void sqlite3_result_text16le(
sqlite3_context *pCtx,
const void *z,
int n,
setResultStrOrError(pCtx, z, n, SQLITE_UTF16LE, xDel);
}
#endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context *pCtx, sqlite3_value *pValue){
+SQLITE_API void sqlite3_result_value(sqlite3_context *pCtx, sqlite3_value *pValue){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemCopy(pCtx->pOut, pValue);
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context *pCtx, int n){
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context *pCtx, int n){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetZeroBlob(pCtx->pOut, n);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context *pCtx, u64 n){
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context *pCtx, u64 n){
Mem *pOut = pCtx->pOut;
assert( sqlite3_mutex_held(pOut->db->mutex) );
if( n>(u64)pOut->db->aLimit[SQLITE_LIMIT_LENGTH] ){
sqlite3VdbeMemSetZeroBlob(pCtx->pOut, (int)n);
return SQLITE_OK;
}
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){
- pCtx->isError = errCode;
- pCtx->fErrorOrAux = 1;
+SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){
+ pCtx->isError = errCode ? errCode : -1;
#ifdef SQLITE_DEBUG
if( pCtx->pVdbe ) pCtx->pVdbe->rcApp = errCode;
#endif
}
/* Force an SQLITE_TOOBIG error. */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context *pCtx){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
pCtx->isError = SQLITE_TOOBIG;
- pCtx->fErrorOrAux = 1;
sqlite3VdbeMemSetStr(pCtx->pOut, "string or blob too big", -1,
SQLITE_UTF8, SQLITE_STATIC);
}
/* An SQLITE_NOMEM error. */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context *pCtx){
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context *pCtx){
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
sqlite3VdbeMemSetNull(pCtx->pOut);
- pCtx->isError = SQLITE_NOMEM;
- pCtx->fErrorOrAux = 1;
- pCtx->pOut->db->mallocFailed = 1;
+ pCtx->isError = SQLITE_NOMEM_BKPT;
+ sqlite3OomFault(pCtx->pOut->db);
}
/*
sqlite3BtreeEnter(pBt);
nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt));
sqlite3BtreeLeave(pBt);
- if( db->xWalCallback && nEntry>0 && rc==SQLITE_OK ){
- rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zName, nEntry);
+ if( nEntry>0 && db->xWalCallback && rc==SQLITE_OK ){
+ rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zDbSName, nEntry);
}
}
}
db = p->db;
if( db->mallocFailed ){
p->rc = SQLITE_NOMEM;
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
if( p->pc<=0 && p->expired ){
);
#ifndef SQLITE_OMIT_TRACE
- if( db->xProfile && !db->init.busy && p->zSql ){
+ if( (db->xProfile || (db->mTrace & SQLITE_TRACE_PROFILE)!=0)
+ && !db->init.busy && p->zSql ){
sqlite3OsCurrentTimeInt64(db->pVfs, &p->startTime);
}else{
assert( p->startTime==0 );
if( rc!=SQLITE_ROW ) checkProfileCallback(db, p);
#endif
- if( rc==SQLITE_DONE ){
+ if( rc==SQLITE_DONE && db->autoCommit ){
assert( p->rc==SQLITE_OK );
p->rc = doWalCallbacks(db);
if( p->rc!=SQLITE_OK ){
db->errCode = rc;
if( SQLITE_NOMEM==sqlite3ApiExit(p->db, p->rc) ){
- p->rc = SQLITE_NOMEM;
+ p->rc = SQLITE_NOMEM_BKPT;
}
end_of_step:
/* At this point local variable rc holds the value that should be
|| (rc&0xff)==SQLITE_BUSY || rc==SQLITE_MISUSE
);
assert( (p->rc!=SQLITE_ROW && p->rc!=SQLITE_DONE) || p->rc==p->rcApp );
- if( p->isPrepareV2 && rc!=SQLITE_ROW && rc!=SQLITE_DONE ){
- /* If this statement was prepared using sqlite3_prepare_v2(), and an
+ if( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0
+ && rc!=SQLITE_ROW
+ && rc!=SQLITE_DONE
+ ){
+ /* If this statement was prepared using saved SQL and an
** error has occurred, then return the error code in p->rc to the
** caller. Set the error code in the database handle to the same value.
*/
** sqlite3Step() to do most of the work. If a schema error occurs,
** call sqlite3Reprepare() and try again.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){
int rc = SQLITE_OK; /* Result from sqlite3Step() */
- int rc2 = SQLITE_OK; /* Result from sqlite3Reprepare() */
Vdbe *v = (Vdbe*)pStmt; /* the prepared statement */
int cnt = 0; /* Counter to prevent infinite loop of reprepares */
sqlite3 *db; /* The database connection */
while( (rc = sqlite3Step(v))==SQLITE_SCHEMA
&& cnt++ < SQLITE_MAX_SCHEMA_RETRY ){
int savedPc = v->pc;
- rc2 = rc = sqlite3Reprepare(v);
- if( rc!=SQLITE_OK) break;
+ rc = sqlite3Reprepare(v);
+ if( rc!=SQLITE_OK ){
+ /* This case occurs after failing to recompile an sql statement.
+ ** The error message from the SQL compiler has already been loaded
+ ** into the database handle. This block copies the error message
+ ** from the database handle into the statement and sets the statement
+ ** program counter to 0 to ensure that when the statement is
+ ** finalized or reset the parser error message is available via
+ ** sqlite3_errmsg() and sqlite3_errcode().
+ */
+ const char *zErr = (const char *)sqlite3_value_text(db->pErr);
+ sqlite3DbFree(db, v->zErrMsg);
+ if( !db->mallocFailed ){
+ v->zErrMsg = sqlite3DbStrDup(db, zErr);
+ v->rc = rc = sqlite3ApiExit(db, rc);
+ } else {
+ v->zErrMsg = 0;
+ v->rc = rc = SQLITE_NOMEM_BKPT;
+ }
+ break;
+ }
sqlite3_reset(pStmt);
if( savedPc>=0 ) v->doingRerun = 1;
assert( v->expired==0 );
}
- if( rc2!=SQLITE_OK ){
- /* This case occurs after failing to recompile an sql statement.
- ** The error message from the SQL compiler has already been loaded
- ** into the database handle. This block copies the error message
- ** from the database handle into the statement and sets the statement
- ** program counter to 0 to ensure that when the statement is
- ** finalized or reset the parser error message is available via
- ** sqlite3_errmsg() and sqlite3_errcode().
- */
- const char *zErr = (const char *)sqlite3_value_text(db->pErr);
- sqlite3DbFree(db, v->zErrMsg);
- if( !db->mallocFailed ){
- v->zErrMsg = sqlite3DbStrDup(db, zErr);
- v->rc = rc2;
- } else {
- v->zErrMsg = 0;
- v->rc = rc = SQLITE_NOMEM;
- }
- }
- rc = sqlite3ApiExit(db, rc);
sqlite3_mutex_leave(db->mutex);
return rc;
}
** Extract the user data from a sqlite3_context structure and return a
** pointer to it.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context *p){
+SQLITE_API void *sqlite3_user_data(sqlite3_context *p){
assert( p && p->pFunc );
return p->pFunc->pUserData;
}
** sqlite3_create_function16() routines that originally registered the
** application defined function.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context *p){
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context *p){
assert( p && p->pOut );
return p->pOut->db;
}
+/*
+** If this routine is invoked from within an xColumn method of a virtual
+** table, then it returns true if and only if the the call is during an
+** UPDATE operation and the value of the column will not be modified
+** by the UPDATE.
+**
+** If this routine is called from any context other than within the
+** xColumn method of a virtual table, then the return value is meaningless
+** and arbitrary.
+**
+** Virtual table implements might use this routine to optimize their
+** performance by substituting a NULL result, or some other light-weight
+** value, as a signal to the xUpdate routine that the column is unchanged.
+*/
+SQLITE_API int sqlite3_vtab_nochange(sqlite3_context *p){
+ assert( p );
+ return sqlite3_value_nochange(p->pOut);
+}
+
/*
** Return the current time for a statement. If the current time
** is requested more than once within the same run of a single prepared
** context is allocated on the first call. Subsequent calls return the
** same context that was returned on prior calls.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context *p, int nByte){
- assert( p && p->pFunc && p->pFunc->xStep );
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){
+ assert( p && p->pFunc && p->pFunc->xFinalize );
assert( sqlite3_mutex_held(p->pOut->db->mutex) );
testcase( nByte<0 );
if( (p->pMem->flags & MEM_Agg)==0 ){
/*
** Return the auxiliary data pointer, if any, for the iArg'th argument to
** the user-function defined by pCtx.
+**
+** The left-most argument is 0.
+**
+** Undocumented behavior: If iArg is negative then access a cache of
+** auxiliary data pointers that is available to all functions within a
+** single prepared statement. The iArg values must match.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){
AuxData *pAuxData;
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
#else
assert( pCtx->pVdbe!=0 );
#endif
- for(pAuxData=pCtx->pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){
- if( pAuxData->iOp==pCtx->iOp && pAuxData->iArg==iArg ) break;
+ for(pAuxData=pCtx->pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNextAux){
+ if( pAuxData->iAuxArg==iArg && (pAuxData->iAuxOp==pCtx->iOp || iArg<0) ){
+ return pAuxData->pAux;
+ }
}
-
- return (pAuxData ? pAuxData->pAux : 0);
+ return 0;
}
/*
** Set the auxiliary data pointer and delete function, for the iArg'th
** argument to the user-function defined by pCtx. Any previous value is
** deleted by calling the delete function specified when it was set.
+**
+** The left-most argument is 0.
+**
+** Undocumented behavior: If iArg is negative then make the data available
+** to all functions within the current prepared statement using iArg as an
+** access code.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(
+SQLITE_API void sqlite3_set_auxdata(
sqlite3_context *pCtx,
int iArg,
void *pAux,
Vdbe *pVdbe = pCtx->pVdbe;
assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) );
- if( iArg<0 ) goto failed;
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
if( pVdbe==0 ) goto failed;
#else
assert( pVdbe!=0 );
#endif
- for(pAuxData=pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){
- if( pAuxData->iOp==pCtx->iOp && pAuxData->iArg==iArg ) break;
+ for(pAuxData=pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNextAux){
+ if( pAuxData->iAuxArg==iArg && (pAuxData->iAuxOp==pCtx->iOp || iArg<0) ){
+ break;
+ }
}
if( pAuxData==0 ){
pAuxData = sqlite3DbMallocZero(pVdbe->db, sizeof(AuxData));
if( !pAuxData ) goto failed;
- pAuxData->iOp = pCtx->iOp;
- pAuxData->iArg = iArg;
- pAuxData->pNext = pVdbe->pAuxData;
+ pAuxData->iAuxOp = pCtx->iOp;
+ pAuxData->iAuxArg = iArg;
+ pAuxData->pNextAux = pVdbe->pAuxData;
pVdbe->pAuxData = pAuxData;
- if( pCtx->fErrorOrAux==0 ){
- pCtx->isError = 0;
- pCtx->fErrorOrAux = 1;
- }
- }else if( pAuxData->xDelete ){
- pAuxData->xDelete(pAuxData->pAux);
+ if( pCtx->isError==0 ) pCtx->isError = -1;
+ }else if( pAuxData->xDeleteAux ){
+ pAuxData->xDeleteAux(pAuxData->pAux);
}
pAuxData->pAux = pAux;
- pAuxData->xDelete = xDelete;
+ pAuxData->xDeleteAux = xDelete;
return;
failed:
** implementations should keep their own counts within their aggregate
** context.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context *p){
- assert( p && p->pMem && p->pFunc && p->pFunc->xStep );
+SQLITE_API int sqlite3_aggregate_count(sqlite3_context *p){
+ assert( p && p->pMem && p->pFunc && p->pFunc->xFinalize );
return p->pMem->n;
}
#endif
/*
** Return the number of columns in the result set for the statement pStmt.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt){
Vdbe *pVm = (Vdbe *)pStmt;
return pVm ? pVm->nResColumn : 0;
}
** Return the number of values available from the current row of the
** currently executing statement pStmt.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt){
Vdbe *pVm = (Vdbe *)pStmt;
if( pVm==0 || pVm->pResultSet==0 ) return 0;
return pVm->nResColumn;
Mem *pOut;
pVm = (Vdbe *)pStmt;
- if( pVm && pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
- sqlite3_mutex_enter(pVm->db->mutex);
+ if( pVm==0 ) return (Mem*)columnNullValue();
+ assert( pVm->db );
+ sqlite3_mutex_enter(pVm->db->mutex);
+ if( pVm->pResultSet!=0 && i<pVm->nResColumn && i>=0 ){
pOut = &pVm->pResultSet[i];
}else{
- if( pVm && ALWAYS(pVm->db) ){
- sqlite3_mutex_enter(pVm->db->mutex);
- sqlite3Error(pVm->db, SQLITE_RANGE);
- }
+ sqlite3Error(pVm->db, SQLITE_RANGE);
pOut = (Mem*)columnNullValue();
}
return pOut;
*/
Vdbe *p = (Vdbe *)pStmt;
if( p ){
+ assert( p->db!=0 );
+ assert( sqlite3_mutex_held(p->db->mutex) );
p->rc = sqlite3ApiExit(p->db, p->rc);
sqlite3_mutex_leave(p->db->mutex);
}
** The following routines are used to access elements of the current row
** in the result set.
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt *pStmt, int i){
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt *pStmt, int i){
const void *val;
val = sqlite3_value_blob( columnMem(pStmt,i) );
/* Even though there is no encoding conversion, value_blob() might
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt *pStmt, int i){
int val = sqlite3_value_bytes( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt *pStmt, int i){
int val = sqlite3_value_bytes16( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt *pStmt, int i){
+SQLITE_API double sqlite3_column_double(sqlite3_stmt *pStmt, int i){
double val = sqlite3_value_double( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_int(sqlite3_stmt *pStmt, int i){
int val = sqlite3_value_int( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt *pStmt, int i){
+SQLITE_API sqlite_int64 sqlite3_column_int64(sqlite3_stmt *pStmt, int i){
sqlite_int64 val = sqlite3_value_int64( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt *pStmt, int i){
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt *pStmt, int i){
const unsigned char *val = sqlite3_value_text( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt *pStmt, int i){
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt *pStmt, int i){
Mem *pOut = columnMem(pStmt, i);
if( pOut->flags&MEM_Static ){
pOut->flags &= ~MEM_Static;
return (sqlite3_value *)pOut;
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt *pStmt, int i){
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt *pStmt, int i){
const void *val = sqlite3_value_text16( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return val;
}
#endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_column_type(sqlite3_stmt *pStmt, int i){
int iType = sqlite3_value_type( columnMem(pStmt,i) );
columnMallocFailure(pStmt);
return iType;
** is the case, clear the mallocFailed flag and return NULL.
*/
if( db->mallocFailed ){
- db->mallocFailed = 0;
+ sqlite3OomClear(db);
ret = 0;
}
sqlite3_mutex_leave(db->mutex);
** Return the name of the Nth column of the result set returned by SQL
** statement pStmt.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_NAME);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_NAME);
}
** Return the column declaration type (if applicable) of the 'i'th column
** of the result set of SQL statement pStmt.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_DECLTYPE);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_DECLTYPE);
}
** NULL is returned if the result column is an expression or constant or
** anything else which is not an unambiguous reference to a database column.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_DATABASE);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_DATABASE);
}
** NULL is returned if the result column is an expression or constant or
** anything else which is not an unambiguous reference to a database column.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_TABLE);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_TABLE);
}
** NULL is returned if the result column is an expression or constant or
** anything else which is not an unambiguous reference to a database column.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt *pStmt, int N){
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text, COLNAME_COLUMN);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt *pStmt, int N){
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt *pStmt, int N){
return columnName(
pStmt, N, (const void*(*)(Mem*))sqlite3_value_text16, COLNAME_COLUMN);
}
** as if there had been a schema change, on the first sqlite3_step() call
** following any change to the bindings of that parameter.
*/
- if( p->isPrepareV2 &&
- ((i<32 && p->expmask & ((u32)1 << i)) || p->expmask==0xffffffff)
- ){
+ assert( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || p->expmask==0 );
+ if( p->expmask!=0 && (p->expmask & (i>=31 ? 0x80000000 : (u32)1<<i))!=0 ){
p->expired = 1;
}
return SQLITE_OK;
if( rc==SQLITE_OK && encoding!=0 ){
rc = sqlite3VdbeChangeEncoding(pVar, ENC(p->db));
}
- sqlite3Error(p->db, rc);
- rc = sqlite3ApiExit(p->db, rc);
+ if( rc ){
+ sqlite3Error(p->db, rc);
+ rc = sqlite3ApiExit(p->db, rc);
+ }
}
sqlite3_mutex_leave(p->db->mutex);
}else if( xDel!=SQLITE_STATIC && xDel!=SQLITE_TRANSIENT ){
/*
** Bind a blob value to an SQL statement variable.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(
+SQLITE_API int sqlite3_bind_blob(
sqlite3_stmt *pStmt,
int i,
const void *zData,
int nData,
void (*xDel)(void*)
){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( nData<0 ) return SQLITE_MISUSE_BKPT;
+#endif
return bindText(pStmt, i, zData, nData, xDel, 0);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(
+SQLITE_API int sqlite3_bind_blob64(
sqlite3_stmt *pStmt,
int i,
const void *zData,
return bindText(pStmt, i, zData, (int)nData, xDel, 0);
}
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt *pStmt, int i, double rValue){
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt *pStmt, int i, double rValue){
int rc;
Vdbe *p = (Vdbe *)pStmt;
rc = vdbeUnbind(p, i);
}
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt *p, int i, int iValue){
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt *p, int i, int iValue){
return sqlite3_bind_int64(p, i, (i64)iValue);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt *pStmt, int i, sqlite_int64 iValue){
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt *pStmt, int i, sqlite_int64 iValue){
int rc;
Vdbe *p = (Vdbe *)pStmt;
rc = vdbeUnbind(p, i);
}
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt *pStmt, int i){
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt *pStmt, int i){
+ int rc;
+ Vdbe *p = (Vdbe*)pStmt;
+ rc = vdbeUnbind(p, i);
+ if( rc==SQLITE_OK ){
+ sqlite3_mutex_leave(p->db->mutex);
+ }
+ return rc;
+}
+SQLITE_API int sqlite3_bind_pointer(
+ sqlite3_stmt *pStmt,
+ int i,
+ void *pPtr,
+ const char *zPTtype,
+ void (*xDestructor)(void*)
+){
int rc;
Vdbe *p = (Vdbe*)pStmt;
rc = vdbeUnbind(p, i);
if( rc==SQLITE_OK ){
+ sqlite3VdbeMemSetPointer(&p->aVar[i-1], pPtr, zPTtype, xDestructor);
sqlite3_mutex_leave(p->db->mutex);
+ }else if( xDestructor ){
+ xDestructor(pPtr);
}
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(
+SQLITE_API int sqlite3_bind_text(
sqlite3_stmt *pStmt,
int i,
const char *zData,
){
return bindText(pStmt, i, zData, nData, xDel, SQLITE_UTF8);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(
+SQLITE_API int sqlite3_bind_text64(
sqlite3_stmt *pStmt,
int i,
const char *zData,
}
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(
+SQLITE_API int sqlite3_bind_text16(
sqlite3_stmt *pStmt,
int i,
const void *zData,
return bindText(pStmt, i, zData, nData, xDel, SQLITE_UTF16NATIVE);
}
#endif /* SQLITE_OMIT_UTF16 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt *pStmt, int i, const sqlite3_value *pValue){
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt *pStmt, int i, const sqlite3_value *pValue){
int rc;
switch( sqlite3_value_type((sqlite3_value*)pValue) ){
case SQLITE_INTEGER: {
}
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt *pStmt, int i, int n){
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt *pStmt, int i, int n){
int rc;
Vdbe *p = (Vdbe *)pStmt;
rc = vdbeUnbind(p, i);
}
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt *pStmt, int i, sqlite3_uint64 n){
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt *pStmt, int i, sqlite3_uint64 n){
int rc;
Vdbe *p = (Vdbe *)pStmt;
sqlite3_mutex_enter(p->db->mutex);
** Return the number of wildcards that can be potentially bound to.
** This routine is added to support DBD::SQLite.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt *pStmt){
Vdbe *p = (Vdbe*)pStmt;
return p ? p->nVar : 0;
}
**
** The result is always UTF-8.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt *pStmt, int i){
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt *pStmt, int i){
Vdbe *p = (Vdbe*)pStmt;
- if( p==0 || i<1 || i>p->nzVar ){
- return 0;
- }
- return p->azVar[i-1];
+ if( p==0 ) return 0;
+ return sqlite3VListNumToName(p->pVList, i);
}
/*
** return 0.
*/
SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe *p, const char *zName, int nName){
- int i;
- if( p==0 ){
- return 0;
- }
- if( zName ){
- for(i=0; i<p->nzVar; i++){
- const char *z = p->azVar[i];
- if( z && strncmp(z,zName,nName)==0 && z[nName]==0 ){
- return i+1;
- }
- }
- }
- return 0;
+ if( p==0 || zName==0 ) return 0;
+ return sqlite3VListNameToNum(p->pVList, zName, nName);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt *pStmt, const char *zName){
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt *pStmt, const char *zName){
return sqlite3VdbeParameterIndex((Vdbe*)pStmt, zName, sqlite3Strlen30(zName));
}
** an SQLITE_ERROR is returned. Nothing else can go wrong, so otherwise
** SQLITE_OK is returned.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt *pFromStmt, sqlite3_stmt *pToStmt){
+SQLITE_API int sqlite3_transfer_bindings(sqlite3_stmt *pFromStmt, sqlite3_stmt *pToStmt){
Vdbe *pFrom = (Vdbe*)pFromStmt;
Vdbe *pTo = (Vdbe*)pToStmt;
if( pFrom->nVar!=pTo->nVar ){
return SQLITE_ERROR;
}
- if( pTo->isPrepareV2 && pTo->expmask ){
+ assert( (pTo->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || pTo->expmask==0 );
+ if( pTo->expmask ){
pTo->expired = 1;
}
- if( pFrom->isPrepareV2 && pFrom->expmask ){
+ assert( (pFrom->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || pFrom->expmask==0 );
+ if( pFrom->expmask ){
pFrom->expired = 1;
}
return sqlite3TransferBindings(pFromStmt, pToStmt);
** the first argument to the sqlite3_prepare() that was used to create
** the statement in the first place.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt *pStmt){
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt *pStmt){
return pStmt ? ((Vdbe*)pStmt)->db : 0;
}
** Return true if the prepared statement is guaranteed to not modify the
** database.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt){
return pStmt ? ((Vdbe*)pStmt)->readOnly : 1;
}
/*
** Return true if the prepared statement is in need of being reset.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt *pStmt){
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt *pStmt){
Vdbe *v = (Vdbe*)pStmt;
- return v!=0 && v->pc>=0 && v->magic==VDBE_MAGIC_RUN;
+ return v!=0 && v->magic==VDBE_MAGIC_RUN && v->pc>=0;
}
/*
** prepared statement for the database connection. Return NULL if there
** are no more.
*/
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt){
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt){
sqlite3_stmt *pNext;
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(pDb) ){
/*
** Return the value of a status counter for a prepared statement
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){
Vdbe *pVdbe = (Vdbe*)pStmt;
u32 v;
#ifdef SQLITE_ENABLE_API_ARMOR
- if( !pStmt ){
+ if( !pStmt
+ || (op!=SQLITE_STMTSTATUS_MEMUSED && (op<0||op>=ArraySize(pVdbe->aCounter)))
+ ){
(void)SQLITE_MISUSE_BKPT;
return 0;
}
#endif
- v = pVdbe->aCounter[op];
- if( resetFlag ) pVdbe->aCounter[op] = 0;
+ if( op==SQLITE_STMTSTATUS_MEMUSED ){
+ sqlite3 *db = pVdbe->db;
+ sqlite3_mutex_enter(db->mutex);
+ v = 0;
+ db->pnBytesFreed = (int*)&v;
+ sqlite3VdbeClearObject(db, pVdbe);
+ sqlite3DbFree(db, pVdbe);
+ db->pnBytesFreed = 0;
+ sqlite3_mutex_leave(db->mutex);
+ }else{
+ v = pVdbe->aCounter[op];
+ if( resetFlag ) pVdbe->aCounter[op] = 0;
+ }
return (int)v;
}
+/*
+** Return the SQL associated with a prepared statement
+*/
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt){
+ Vdbe *p = (Vdbe *)pStmt;
+ return p ? p->zSql : 0;
+}
+
+/*
+** Return the SQL associated with a prepared statement with
+** bound parameters expanded. Space to hold the returned string is
+** obtained from sqlite3_malloc(). The caller is responsible for
+** freeing the returned string by passing it to sqlite3_free().
+**
+** The SQLITE_TRACE_SIZE_LIMIT puts an upper bound on the size of
+** expanded bound parameters.
+*/
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt){
+#ifdef SQLITE_OMIT_TRACE
+ return 0;
+#else
+ char *z = 0;
+ const char *zSql = sqlite3_sql(pStmt);
+ if( zSql ){
+ Vdbe *p = (Vdbe *)pStmt;
+ sqlite3_mutex_enter(p->db->mutex);
+ z = sqlite3VdbeExpandSql(p, zSql);
+ sqlite3_mutex_leave(p->db->mutex);
+ }
+ return z;
+#endif
+}
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** Allocate and populate an UnpackedRecord structure based on the serialized
+** record in nKey/pKey. Return a pointer to the new UnpackedRecord structure
+** if successful, or a NULL pointer if an OOM error is encountered.
+*/
+static UnpackedRecord *vdbeUnpackRecord(
+ KeyInfo *pKeyInfo,
+ int nKey,
+ const void *pKey
+){
+ UnpackedRecord *pRet; /* Return value */
+
+ pRet = sqlite3VdbeAllocUnpackedRecord(pKeyInfo);
+ if( pRet ){
+ memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nKeyField+1));
+ sqlite3VdbeRecordUnpack(pKeyInfo, nKey, pKey, pRet);
+ }
+ return pRet;
+}
+
+/*
+** This function is called from within a pre-update callback to retrieve
+** a field of the row currently being updated or deleted.
+*/
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
+ PreUpdate *p = db->pPreUpdate;
+ Mem *pMem;
+ int rc = SQLITE_OK;
+
+ /* Test that this call is being made from within an SQLITE_DELETE or
+ ** SQLITE_UPDATE pre-update callback, and that iIdx is within range. */
+ if( !p || p->op==SQLITE_INSERT ){
+ rc = SQLITE_MISUSE_BKPT;
+ goto preupdate_old_out;
+ }
+ if( p->pPk ){
+ iIdx = sqlite3ColumnOfIndex(p->pPk, iIdx);
+ }
+ if( iIdx>=p->pCsr->nField || iIdx<0 ){
+ rc = SQLITE_RANGE;
+ goto preupdate_old_out;
+ }
+
+ /* If the old.* record has not yet been loaded into memory, do so now. */
+ if( p->pUnpacked==0 ){
+ u32 nRec;
+ u8 *aRec;
+
+ nRec = sqlite3BtreePayloadSize(p->pCsr->uc.pCursor);
+ aRec = sqlite3DbMallocRaw(db, nRec);
+ if( !aRec ) goto preupdate_old_out;
+ rc = sqlite3BtreePayload(p->pCsr->uc.pCursor, 0, nRec, aRec);
+ if( rc==SQLITE_OK ){
+ p->pUnpacked = vdbeUnpackRecord(&p->keyinfo, nRec, aRec);
+ if( !p->pUnpacked ) rc = SQLITE_NOMEM;
+ }
+ if( rc!=SQLITE_OK ){
+ sqlite3DbFree(db, aRec);
+ goto preupdate_old_out;
+ }
+ p->aRecord = aRec;
+ }
+
+ pMem = *ppValue = &p->pUnpacked->aMem[iIdx];
+ if( iIdx==p->pTab->iPKey ){
+ sqlite3VdbeMemSetInt64(pMem, p->iKey1);
+ }else if( iIdx>=p->pUnpacked->nField ){
+ *ppValue = (sqlite3_value *)columnNullValue();
+ }else if( p->pTab->aCol[iIdx].affinity==SQLITE_AFF_REAL ){
+ if( pMem->flags & MEM_Int ){
+ sqlite3VdbeMemRealify(pMem);
+ }
+ }
+
+ preupdate_old_out:
+ sqlite3Error(db, rc);
+ return sqlite3ApiExit(db, rc);
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** This function is called from within a pre-update callback to retrieve
+** the number of columns in the row being updated, deleted or inserted.
+*/
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *db){
+ PreUpdate *p = db->pPreUpdate;
+ return (p ? p->keyinfo.nKeyField : 0);
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** This function is designed to be called from within a pre-update callback
+** only. It returns zero if the change that caused the callback was made
+** immediately by a user SQL statement. Or, if the change was made by a
+** trigger program, it returns the number of trigger programs currently
+** on the stack (1 for a top-level trigger, 2 for a trigger fired by a
+** top-level trigger etc.).
+**
+** For the purposes of the previous paragraph, a foreign key CASCADE, SET NULL
+** or SET DEFAULT action is considered a trigger.
+*/
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *db){
+ PreUpdate *p = db->pPreUpdate;
+ return (p ? p->v->nFrame : 0);
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** This function is called from within a pre-update callback to retrieve
+** a field of the row currently being updated or inserted.
+*/
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *db, int iIdx, sqlite3_value **ppValue){
+ PreUpdate *p = db->pPreUpdate;
+ int rc = SQLITE_OK;
+ Mem *pMem;
+
+ if( !p || p->op==SQLITE_DELETE ){
+ rc = SQLITE_MISUSE_BKPT;
+ goto preupdate_new_out;
+ }
+ if( p->pPk && p->op!=SQLITE_UPDATE ){
+ iIdx = sqlite3ColumnOfIndex(p->pPk, iIdx);
+ }
+ if( iIdx>=p->pCsr->nField || iIdx<0 ){
+ rc = SQLITE_RANGE;
+ goto preupdate_new_out;
+ }
+
+ if( p->op==SQLITE_INSERT ){
+ /* For an INSERT, memory cell p->iNewReg contains the serialized record
+ ** that is being inserted. Deserialize it. */
+ UnpackedRecord *pUnpack = p->pNewUnpacked;
+ if( !pUnpack ){
+ Mem *pData = &p->v->aMem[p->iNewReg];
+ rc = ExpandBlob(pData);
+ if( rc!=SQLITE_OK ) goto preupdate_new_out;
+ pUnpack = vdbeUnpackRecord(&p->keyinfo, pData->n, pData->z);
+ if( !pUnpack ){
+ rc = SQLITE_NOMEM;
+ goto preupdate_new_out;
+ }
+ p->pNewUnpacked = pUnpack;
+ }
+ pMem = &pUnpack->aMem[iIdx];
+ if( iIdx==p->pTab->iPKey ){
+ sqlite3VdbeMemSetInt64(pMem, p->iKey2);
+ }else if( iIdx>=pUnpack->nField ){
+ pMem = (sqlite3_value *)columnNullValue();
+ }
+ }else{
+ /* For an UPDATE, memory cell (p->iNewReg+1+iIdx) contains the required
+ ** value. Make a copy of the cell contents and return a pointer to it.
+ ** It is not safe to return a pointer to the memory cell itself as the
+ ** caller may modify the value text encoding.
+ */
+ assert( p->op==SQLITE_UPDATE );
+ if( !p->aNew ){
+ p->aNew = (Mem *)sqlite3DbMallocZero(db, sizeof(Mem) * p->pCsr->nField);
+ if( !p->aNew ){
+ rc = SQLITE_NOMEM;
+ goto preupdate_new_out;
+ }
+ }
+ assert( iIdx>=0 && iIdx<p->pCsr->nField );
+ pMem = &p->aNew[iIdx];
+ if( pMem->flags==0 ){
+ if( iIdx==p->pTab->iPKey ){
+ sqlite3VdbeMemSetInt64(pMem, p->iKey2);
+ }else{
+ rc = sqlite3VdbeMemCopy(pMem, &p->v->aMem[p->iNewReg+1+iIdx]);
+ if( rc!=SQLITE_OK ) goto preupdate_new_out;
+ }
+ }
+ }
+ *ppValue = pMem;
+
+ preupdate_new_out:
+ sqlite3Error(db, rc);
+ return sqlite3ApiExit(db, rc);
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
/*
** Return status data for a single loop within query pStmt.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
sqlite3_stmt *pStmt, /* Prepared statement being queried */
int idx, /* Index of loop to report on */
int iScanStatusOp, /* Which metric to return */
/*
** Zero all counters associated with the sqlite3_stmt_scanstatus() data.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt *pStmt){
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt *pStmt){
Vdbe *p = (Vdbe*)pStmt;
memset(p->anExec, 0, p->nOp * sizeof(i64));
}
int i; /* Loop counter */
Mem *pVar; /* Value of a host parameter */
StrAccum out; /* Accumulate the output here */
+#ifndef SQLITE_OMIT_UTF16
+ Mem utf8; /* Used to convert UTF16 into UTF8 for display */
+#endif
char zBase[100]; /* Initial working space */
db = p->db;
- sqlite3StrAccumInit(&out, db, zBase, sizeof(zBase),
+ sqlite3StrAccumInit(&out, 0, zBase, sizeof(zBase),
db->aLimit[SQLITE_LIMIT_LENGTH]);
if( db->nVdbeExec>1 ){
while( *zRawSql ){
if( pVar->flags & MEM_Null ){
sqlite3StrAccumAppend(&out, "NULL", 4);
}else if( pVar->flags & MEM_Int ){
- sqlite3XPrintf(&out, 0, "%lld", pVar->u.i);
+ sqlite3XPrintf(&out, "%lld", pVar->u.i);
}else if( pVar->flags & MEM_Real ){
- sqlite3XPrintf(&out, 0, "%!.15g", pVar->u.r);
+ sqlite3XPrintf(&out, "%!.15g", pVar->u.r);
}else if( pVar->flags & MEM_Str ){
int nOut; /* Number of bytes of the string text to include in output */
#ifndef SQLITE_OMIT_UTF16
u8 enc = ENC(db);
- Mem utf8;
if( enc!=SQLITE_UTF8 ){
memset(&utf8, 0, sizeof(utf8));
utf8.db = db;
sqlite3VdbeMemSetStr(&utf8, pVar->z, pVar->n, enc, SQLITE_STATIC);
- sqlite3VdbeChangeEncoding(&utf8, SQLITE_UTF8);
+ if( SQLITE_NOMEM==sqlite3VdbeChangeEncoding(&utf8, SQLITE_UTF8) ){
+ out.accError = STRACCUM_NOMEM;
+ out.nAlloc = 0;
+ }
pVar = &utf8;
}
#endif
while( nOut<pVar->n && (pVar->z[nOut]&0xc0)==0x80 ){ nOut++; }
}
#endif
- sqlite3XPrintf(&out, 0, "'%.*q'", nOut, pVar->z);
+ sqlite3XPrintf(&out, "'%.*q'", nOut, pVar->z);
#ifdef SQLITE_TRACE_SIZE_LIMIT
if( nOut<pVar->n ){
- sqlite3XPrintf(&out, 0, "/*+%d bytes*/", pVar->n-nOut);
+ sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut);
}
#endif
#ifndef SQLITE_OMIT_UTF16
if( enc!=SQLITE_UTF8 ) sqlite3VdbeMemRelease(&utf8);
#endif
}else if( pVar->flags & MEM_Zero ){
- sqlite3XPrintf(&out, 0, "zeroblob(%d)", pVar->u.nZero);
+ sqlite3XPrintf(&out, "zeroblob(%d)", pVar->u.nZero);
}else{
int nOut; /* Number of bytes of the blob to include in output */
assert( pVar->flags & MEM_Blob );
if( nOut>SQLITE_TRACE_SIZE_LIMIT ) nOut = SQLITE_TRACE_SIZE_LIMIT;
#endif
for(i=0; i<nOut; i++){
- sqlite3XPrintf(&out, 0, "%02x", pVar->z[i]&0xff);
+ sqlite3XPrintf(&out, "%02x", pVar->z[i]&0xff);
}
sqlite3StrAccumAppend(&out, "'", 1);
#ifdef SQLITE_TRACE_SIZE_LIMIT
if( nOut<pVar->n ){
- sqlite3XPrintf(&out, 0, "/*+%d bytes*/", pVar->n-nOut);
+ sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut);
}
#endif
}
}
}
+ if( out.accError ) sqlite3StrAccumReset(&out);
return sqlite3StrAccumFinish(&out);
}
}
#endif
+/*
+** This macro evaluates to true if either the update hook or the preupdate
+** hook are enabled for database connect DB.
+*/
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+# define HAS_UPDATE_HOOK(DB) ((DB)->xPreUpdateCallback||(DB)->xUpdateCallback)
+#else
+# define HAS_UPDATE_HOOK(DB) ((DB)->xUpdateCallback)
+#endif
+
/*
** The next global variable is incremented each time the OP_Found opcode
** is executed. This is used to test whether or not the foreign key
** Test a register to see if it exceeds the current maximum blob size.
** If it does, record the new maximum blob size.
*/
-#if defined(SQLITE_TEST) && !defined(SQLITE_OMIT_BUILTIN_TEST)
+#if defined(SQLITE_TEST) && !defined(SQLITE_UNTESTABLE)
# define UPDATE_MAX_BLOBSIZE(P) updateMaxBlobsize(P)
#else
# define UPDATE_MAX_BLOBSIZE(P)
&& sqlite3VdbeMemMakeWriteable(P) ){ goto no_mem;}
/* Return true if the cursor was opened using the OP_OpenSorter opcode. */
-#define isSorter(x) ((x)->pSorter!=0)
+#define isSorter(x) ((x)->eCurType==CURTYPE_SORTER)
/*
** Allocate VdbeCursor number iCur. Return a pointer to it. Return NULL
int iCur, /* Index of the new VdbeCursor */
int nField, /* Number of fields in the table or index */
int iDb, /* Database the cursor belongs to, or -1 */
- int isBtreeCursor /* True for B-Tree. False for pseudo-table or vtab */
+ u8 eCurType /* Type of the new cursor */
){
/* Find the memory cell that will be used to store the blob of memory
** required for this VdbeCursor structure. It is convenient to use a
** be freed lazily via the sqlite3_release_memory() API. This
** minimizes the number of malloc calls made by the system.
**
- ** Memory cells for cursors are allocated at the top of the address
- ** space. Memory cell (p->nMem) corresponds to cursor 0. Space for
- ** cursor 1 is managed by memory cell (p->nMem-1), etc.
+ ** The memory cell for cursor 0 is aMem[0]. The rest are allocated from
+ ** the top of the register space. Cursor 1 is at Mem[p->nMem-1].
+ ** Cursor 2 is at Mem[p->nMem-2]. And so forth.
*/
- Mem *pMem = &p->aMem[p->nMem-iCur];
+ Mem *pMem = iCur>0 ? &p->aMem[p->nMem-iCur] : p->aMem;
int nByte;
VdbeCursor *pCx = 0;
nByte =
ROUND8(sizeof(VdbeCursor)) + 2*sizeof(u32)*nField +
- (isBtreeCursor?sqlite3BtreeCursorSize():0);
+ (eCurType==CURTYPE_BTREE?sqlite3BtreeCursorSize():0);
- assert( iCur<p->nCursor );
- if( p->apCsr[iCur] ){
+ assert( iCur>=0 && iCur<p->nCursor );
+ if( p->apCsr[iCur] ){ /*OPTIMIZATION-IF-FALSE*/
sqlite3VdbeFreeCursor(p, p->apCsr[iCur]);
p->apCsr[iCur] = 0;
}
if( SQLITE_OK==sqlite3VdbeMemClearAndResize(pMem, nByte) ){
p->apCsr[iCur] = pCx = (VdbeCursor*)pMem->z;
- memset(pCx, 0, sizeof(VdbeCursor));
+ memset(pCx, 0, offsetof(VdbeCursor,pAltCursor));
+ pCx->eCurType = eCurType;
pCx->iDb = iDb;
pCx->nField = nField;
pCx->aOffset = &pCx->aType[nField];
- if( isBtreeCursor ){
- pCx->pCursor = (BtCursor*)
+ if( eCurType==CURTYPE_BTREE ){
+ pCx->uc.pCursor = (BtCursor*)
&pMem->z[ROUND8(sizeof(VdbeCursor))+2*sizeof(u32)*nField];
- sqlite3BtreeCursorZero(pCx->pCursor);
+ sqlite3BtreeCursorZero(pCx->uc.pCursor);
}
}
return pCx;
pRec->flags |= MEM_Real;
if( bTryForInt ) sqlite3VdbeIntegerAffinity(pRec);
}
+ /* TEXT->NUMERIC is many->one. Hence, it is important to invalidate the
+ ** string representation after computing a numeric equivalent, because the
+ ** string representation might not be the canonical representation for the
+ ** numeric value. Ticket [343634942dd54ab57b7024] 2018-01-31. */
+ pRec->flags &= ~MEM_Str;
}
/*
if( affinity>=SQLITE_AFF_NUMERIC ){
assert( affinity==SQLITE_AFF_INTEGER || affinity==SQLITE_AFF_REAL
|| affinity==SQLITE_AFF_NUMERIC );
- if( (pRec->flags & MEM_Int)==0 ){
+ if( (pRec->flags & MEM_Int)==0 ){ /*OPTIMIZATION-IF-FALSE*/
if( (pRec->flags & MEM_Real)==0 ){
if( pRec->flags & MEM_Str ) applyNumericAffinity(pRec,1);
}else{
}else if( affinity==SQLITE_AFF_TEXT ){
/* Only attempt the conversion to TEXT if there is an integer or real
** representation (blob and NULL do not get converted) but no string
- ** representation.
- */
- if( 0==(pRec->flags&MEM_Str) && (pRec->flags&(MEM_Real|MEM_Int)) ){
- sqlite3VdbeMemStringify(pRec, enc, 1);
+ ** representation. It would be harmless to repeat the conversion if
+ ** there is already a string rep, but it is pointless to waste those
+ ** CPU cycles. */
+ if( 0==(pRec->flags&MEM_Str) ){ /*OPTIMIZATION-IF-FALSE*/
+ if( (pRec->flags&(MEM_Real|MEM_Int)) ){
+ sqlite3VdbeMemStringify(pRec, enc, 1);
+ }
}
pRec->flags &= ~(MEM_Real|MEM_Int);
}
** is appropriate. But only do the conversion if it is possible without
** loss of information and return the revised type of the argument.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value *pVal){
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value *pVal){
int eType = sqlite3_value_type(pVal);
if( eType==SQLITE_TEXT ){
Mem *pMem = (Mem*)pVal;
if( sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc)==0 ){
return 0;
}
- if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==SQLITE_OK ){
+ if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==0 ){
return MEM_Int;
}
return MEM_Real;
}else{
c = 's';
}
-
- sqlite3_snprintf(100, zCsr, "%c", c);
- zCsr += sqlite3Strlen30(zCsr);
+ *(zCsr++) = c;
sqlite3_snprintf(100, zCsr, "%d[", pMem->n);
zCsr += sqlite3Strlen30(zCsr);
for(i=0; i<16 && i<pMem->n; i++){
if( z<32 || z>126 ) *zCsr++ = '.';
else *zCsr++ = z;
}
-
- sqlite3_snprintf(100, zCsr, "]%s", encnames[pMem->enc]);
- zCsr += sqlite3Strlen30(zCsr);
+ *(zCsr++) = ']';
if( f & MEM_Zero ){
sqlite3_snprintf(100, zCsr,"+%dz",pMem->u.nZero);
zCsr += sqlite3Strlen30(zCsr);
if( p->flags & MEM_Undefined ){
printf(" undefined");
}else if( p->flags & MEM_Null ){
- printf(" NULL");
+ printf(p->flags & MEM_Zero ? " NULL-nochng" : " NULL");
}else if( (p->flags & (MEM_Int|MEM_Str))==(MEM_Int|MEM_Str) ){
printf(" si:%lld", p->u.i);
}else if( p->flags & MEM_Int ){
sqlite3VdbeMemPrettyPrint(p, zBuf);
printf(" %s", zBuf);
}
+ if( p->flags & MEM_Subtype ) printf(" subtype=0x%02x", p->eSubtype);
}
static void registerTrace(int iReg, Mem *p){
printf("REG[%d] = ", iReg);
memTracePrint(p);
printf("\n");
+ sqlite3VdbeCheckMemInvariants(p);
}
#endif
** This file contains inline asm code for retrieving "high-performance"
** counters for x86 class CPUs.
*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
+#ifndef SQLITE_HWTIME_H
+#define SQLITE_HWTIME_H
/*
** The following routine only works on pentium-class (or newer) processors.
#endif
-#endif /* !defined(_HWTIME_H_) */
+#endif /* !defined(SQLITE_HWTIME_H) */
/************** End of hwtime.h **********************************************/
/************** Continuing where we left off in vdbe.c ***********************/
/*
** Return the register of pOp->p2 after first preparing it to be
** overwritten with an integer value.
-*/
+*/
+static SQLITE_NOINLINE Mem *out2PrereleaseWithClear(Mem *pOut){
+ sqlite3VdbeMemSetNull(pOut);
+ pOut->flags = MEM_Int;
+ return pOut;
+}
static Mem *out2Prerelease(Vdbe *p, VdbeOp *pOp){
Mem *pOut;
assert( pOp->p2>0 );
- assert( pOp->p2<=(p->nMem-p->nCursor) );
+ assert( pOp->p2<=(p->nMem+1 - p->nCursor) );
pOut = &p->aMem[pOp->p2];
memAboutToChange(p, pOut);
- if( VdbeMemDynamic(pOut) ) sqlite3VdbeMemSetNull(pOut);
- pOut->flags = MEM_Int;
- return pOut;
+ if( VdbeMemDynamic(pOut) ){ /*OPTIMIZATION-IF-FALSE*/
+ return out2PrereleaseWithClear(pOut);
+ }else{
+ pOut->flags = MEM_Int;
+ return pOut;
+ }
}
Op *pOp = aOp; /* Current operation */
#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
Op *pOrigOp; /* Value of pOp at the top of the loop */
+#endif
+#ifdef SQLITE_DEBUG
+ int nExtraDelete = 0; /* Verifies FORDELETE and AUXDELETE flags */
#endif
int rc = SQLITE_OK; /* Value to return */
sqlite3 *db = p->db; /* The database */
u8 resetSchemaOnFault = 0; /* Reset schema after an error if positive */
u8 encoding = ENC(db); /* The database encoding */
- int iCompare = 0; /* Result of last OP_Compare operation */
+ int iCompare = 0; /* Result of last comparison */
unsigned nVmStep = 0; /* Number of virtual machine steps */
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
- unsigned nProgressLimit = 0;/* Invoke xProgress() when nVmStep reaches this */
+ unsigned nProgressLimit; /* Invoke xProgress() when nVmStep reaches this */
#endif
Mem *aMem = p->aMem; /* Copy of p->aMem */
Mem *pIn1 = 0; /* 1st input operand */
Mem *pIn2 = 0; /* 2nd input operand */
Mem *pIn3 = 0; /* 3rd input operand */
Mem *pOut = 0; /* Output operand */
- int *aPermute = 0; /* Permutation of columns for OP_Compare */
- i64 lastRowid = db->lastRowid; /* Saved value of the last insert ROWID */
#ifdef VDBE_PROFILE
u64 start; /* CPU clock count at start of opcode */
#endif
}
assert( p->rc==SQLITE_OK || (p->rc&0xff)==SQLITE_BUSY );
assert( p->bIsReader || p->readOnly!=0 );
- p->rc = SQLITE_OK;
p->iCurrentTime = 0;
assert( p->explain==0 );
p->pResultSet = 0;
u32 iPrior = p->aCounter[SQLITE_STMTSTATUS_VM_STEP];
assert( 0 < db->nProgressOps );
nProgressLimit = db->nProgressOps - (iPrior % db->nProgressOps);
+ }else{
+ nProgressLimit = 0xffffffff;
}
#endif
#ifdef SQLITE_DEBUG
}
sqlite3EndBenignMalloc();
#endif
- for(pOp=&aOp[p->pc]; rc==SQLITE_OK; pOp++){
+ for(pOp=&aOp[p->pc]; 1; pOp++){
+ /* Errors are detected by individual opcodes, with an immediate
+ ** jumps to abort_due_to_error. */
+ assert( rc==SQLITE_OK );
+
assert( pOp>=aOp && pOp<&aOp[p->nOp]);
- if( db->mallocFailed ) goto no_mem;
#ifdef VDBE_PROFILE
- start = sqlite3Hwtime();
+ start = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime();
#endif
nVmStep++;
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
/* Sanity checking on other operands */
#ifdef SQLITE_DEBUG
- assert( pOp->opflags==sqlite3OpcodeProperty[pOp->opcode] );
- if( (pOp->opflags & OPFLG_IN1)!=0 ){
- assert( pOp->p1>0 );
- assert( pOp->p1<=(p->nMem-p->nCursor) );
- assert( memIsValid(&aMem[pOp->p1]) );
- assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p1]) );
- REGISTER_TRACE(pOp->p1, &aMem[pOp->p1]);
- }
- if( (pOp->opflags & OPFLG_IN2)!=0 ){
- assert( pOp->p2>0 );
- assert( pOp->p2<=(p->nMem-p->nCursor) );
- assert( memIsValid(&aMem[pOp->p2]) );
- assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p2]) );
- REGISTER_TRACE(pOp->p2, &aMem[pOp->p2]);
- }
- if( (pOp->opflags & OPFLG_IN3)!=0 ){
- assert( pOp->p3>0 );
- assert( pOp->p3<=(p->nMem-p->nCursor) );
- assert( memIsValid(&aMem[pOp->p3]) );
- assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p3]) );
- REGISTER_TRACE(pOp->p3, &aMem[pOp->p3]);
- }
- if( (pOp->opflags & OPFLG_OUT2)!=0 ){
- assert( pOp->p2>0 );
- assert( pOp->p2<=(p->nMem-p->nCursor) );
- memAboutToChange(p, &aMem[pOp->p2]);
- }
- if( (pOp->opflags & OPFLG_OUT3)!=0 ){
- assert( pOp->p3>0 );
- assert( pOp->p3<=(p->nMem-p->nCursor) );
- memAboutToChange(p, &aMem[pOp->p3]);
+ {
+ u8 opProperty = sqlite3OpcodeProperty[pOp->opcode];
+ if( (opProperty & OPFLG_IN1)!=0 ){
+ assert( pOp->p1>0 );
+ assert( pOp->p1<=(p->nMem+1 - p->nCursor) );
+ assert( memIsValid(&aMem[pOp->p1]) );
+ assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p1]) );
+ REGISTER_TRACE(pOp->p1, &aMem[pOp->p1]);
+ }
+ if( (opProperty & OPFLG_IN2)!=0 ){
+ assert( pOp->p2>0 );
+ assert( pOp->p2<=(p->nMem+1 - p->nCursor) );
+ assert( memIsValid(&aMem[pOp->p2]) );
+ assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p2]) );
+ REGISTER_TRACE(pOp->p2, &aMem[pOp->p2]);
+ }
+ if( (opProperty & OPFLG_IN3)!=0 ){
+ assert( pOp->p3>0 );
+ assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
+ assert( memIsValid(&aMem[pOp->p3]) );
+ assert( sqlite3VdbeCheckMemInvariants(&aMem[pOp->p3]) );
+ REGISTER_TRACE(pOp->p3, &aMem[pOp->p3]);
+ }
+ if( (opProperty & OPFLG_OUT2)!=0 ){
+ assert( pOp->p2>0 );
+ assert( pOp->p2<=(p->nMem+1 - p->nCursor) );
+ memAboutToChange(p, &aMem[pOp->p2]);
+ }
+ if( (opProperty & OPFLG_OUT3)!=0 ){
+ assert( pOp->p3>0 );
+ assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
+ memAboutToChange(p, &aMem[pOp->p3]);
+ }
}
#endif
#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
pOp = &aOp[pOp->p2 - 1];
/* Opcodes that are used as the bottom of a loop (OP_Next, OP_Prev,
- ** OP_VNext, OP_RowSetNext, or OP_SorterNext) all jump here upon
+ ** OP_VNext, or OP_SorterNext) all jump here upon
** completion. Check to see if sqlite3_interrupt() has been called
** or if the progress callback needs to be invoked.
**
** If the progress callback returns non-zero, exit the virtual machine with
** a return code SQLITE_ABORT.
*/
- if( db->xProgress!=0 && nVmStep>=nProgressLimit ){
+ if( nVmStep>=nProgressLimit && db->xProgress!=0 ){
assert( db->nProgressOps!=0 );
nProgressLimit = nVmStep + db->nProgressOps - (nVmStep%db->nProgressOps);
if( db->xProgress(db->pProgressArg) ){
rc = SQLITE_INTERRUPT;
- goto vdbe_error_halt;
+ goto abort_due_to_error;
}
}
#endif
** and then jump to address P2.
*/
case OP_Gosub: { /* jump */
- assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) );
+ assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) );
pIn1 = &aMem[pOp->p1];
assert( VdbeMemDynamic(pIn1)==0 );
memAboutToChange(p, pIn1);
** See also: EndCoroutine
*/
case OP_InitCoroutine: { /* jump */
- assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) );
+ assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) );
assert( pOp->p2>=0 && pOp->p2<p->nOp );
assert( pOp->p3>=0 && pOp->p3<p->nOp );
pOut = &aMem[pOp->p1];
}
/* Opcode: HaltIfNull P1 P2 P3 P4 P5
-** Synopsis: if r[P3]=null halt
+** Synopsis: if r[P3]=null halt
**
** Check the value in register P3. If it is NULL then Halt using
** parameter P1, P2, and P4 as if this were a Halt instruction. If the
** is the same as executing Halt.
*/
case OP_Halt: {
- const char *zType;
- const char *zLogFmt;
VdbeFrame *pFrame;
int pcx;
p->nFrame--;
sqlite3VdbeSetChanges(db, p->nChange);
pcx = sqlite3VdbeFrameRestore(pFrame);
- lastRowid = db->lastRowid;
if( pOp->p2==OE_Ignore ){
/* Instruction pcx is the OP_Program that invoked the sub-program
** currently being halted. If the p2 instruction of this OP_Halt
p->rc = pOp->p1;
p->errorAction = (u8)pOp->p2;
p->pc = pcx;
+ assert( pOp->p5<=4 );
if( p->rc ){
if( pOp->p5 ){
static const char * const azType[] = { "NOT NULL", "UNIQUE", "CHECK",
"FOREIGN KEY" };
- assert( pOp->p5>=1 && pOp->p5<=4 );
testcase( pOp->p5==1 );
testcase( pOp->p5==2 );
testcase( pOp->p5==3 );
testcase( pOp->p5==4 );
- zType = azType[pOp->p5-1];
+ sqlite3VdbeError(p, "%s constraint failed", azType[pOp->p5-1]);
+ if( pOp->p4.z ){
+ p->zErrMsg = sqlite3MPrintf(db, "%z: %s", p->zErrMsg, pOp->p4.z);
+ }
}else{
- zType = 0;
- }
- assert( zType!=0 || pOp->p4.z!=0 );
- zLogFmt = "abort at %d in [%s]: %s";
- if( zType && pOp->p4.z ){
- sqlite3VdbeError(p, "%s constraint failed: %s", zType, pOp->p4.z);
- }else if( pOp->p4.z ){
sqlite3VdbeError(p, "%s", pOp->p4.z);
- }else{
- sqlite3VdbeError(p, "%s constraint failed", zType);
}
- sqlite3_log(pOp->p1, zLogFmt, pcx, p->zSql, p->zErrMsg);
+ sqlite3_log(pOp->p1, "abort at %d in [%s]: %s", pcx, p->zSql, p->zErrMsg);
}
rc = sqlite3VdbeHalt(p);
assert( rc==SQLITE_BUSY || rc==SQLITE_OK || rc==SQLITE_ERROR );
if( rc==SQLITE_BUSY ){
- p->rc = rc = SQLITE_BUSY;
+ p->rc = SQLITE_BUSY;
}else{
assert( rc==SQLITE_OK || (p->rc&0xff)==SQLITE_CONSTRAINT );
assert( rc==SQLITE_OK || db->nDeferredCons>0 || db->nDeferredImmCons>0 );
#ifndef SQLITE_OMIT_UTF16
if( encoding!=SQLITE_UTF8 ){
rc = sqlite3VdbeMemSetStr(pOut, pOp->p4.z, -1, SQLITE_UTF8, SQLITE_STATIC);
- if( rc==SQLITE_TOOBIG ) goto too_big;
+ assert( rc==SQLITE_OK || rc==SQLITE_TOOBIG );
if( SQLITE_OK!=sqlite3VdbeChangeEncoding(pOut, encoding) ) goto no_mem;
assert( pOut->szMalloc>0 && pOut->zMalloc==pOut->z );
assert( VdbeMemDynamic(pOut)==0 );
pOp->p4.z = pOut->z;
pOp->p1 = pOut->n;
}
+ testcase( rc==SQLITE_TOOBIG );
#endif
if( pOp->p1>db->aLimit[SQLITE_LIMIT_LENGTH] ){
goto too_big;
}
+ assert( rc==SQLITE_OK );
/* Fall through to the next case, OP_String */
}
**
** The string value P4 of length P1 (bytes) is stored in register P2.
**
-** If P5!=0 and the content of register P3 is greater than zero, then
+** If P3 is not zero and the content of register P3 is equal to P5, then
** the datatype of the register P2 is converted to BLOB. The content is
** the same sequence of bytes, it is merely interpreted as a BLOB instead
-** of a string, as if it had been CAST.
+** of a string, as if it had been CAST. In other words:
+**
+** if( P3!=0 and reg[P3]==P5 ) reg[P2] := CAST(reg[P2] as BLOB)
*/
case OP_String: { /* out2 */
assert( pOp->p4.z!=0 );
pOut->n = pOp->p1;
pOut->enc = encoding;
UPDATE_MAX_BLOBSIZE(pOut);
- if( pOp->p5 ){
- assert( pOp->p3>0 );
- assert( pOp->p3<=(p->nMem-p->nCursor) );
+#ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
+ if( pOp->p3>0 ){
+ assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
pIn3 = &aMem[pOp->p3];
assert( pIn3->flags & MEM_Int );
- if( pIn3->u.i ) pOut->flags = MEM_Blob|MEM_Static|MEM_Term;
+ if( pIn3->u.i==pOp->p5 ) pOut->flags = MEM_Blob|MEM_Static|MEM_Term;
}
+#endif
break;
}
/* Opcode: Null P1 P2 P3 * *
-** Synopsis: r[P2..P3]=NULL
+** Synopsis: r[P2..P3]=NULL
**
** Write a NULL into registers P2. If P3 greater than P2, then also write
** NULL into register P3 and every register in between P2 and P3. If P3
u16 nullFlag;
pOut = out2Prerelease(p, pOp);
cnt = pOp->p3-pOp->p2;
- assert( pOp->p3<=(p->nMem-p->nCursor) );
+ assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
pOut->flags = nullFlag = pOp->p1 ? (MEM_Null|MEM_Cleared) : MEM_Null;
+ pOut->n = 0;
while( cnt>0 ){
pOut++;
memAboutToChange(p, pOut);
sqlite3VdbeMemSetNull(pOut);
pOut->flags = nullFlag;
+ pOut->n = 0;
cnt--;
}
break;
}
/* Opcode: SoftNull P1 * * * *
-** Synopsis: r[P1]=NULL
+** Synopsis: r[P1]=NULL
**
** Set register P1 to have the value NULL as seen by the OP_MakeRecord
** instruction, but do not free any string or blob memory associated with
** previously copied using OP_SCopy, the copies will continue to be valid.
*/
case OP_SoftNull: {
- assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) );
+ assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) );
pOut = &aMem[pOp->p1];
- pOut->flags = (pOut->flags|MEM_Null)&~MEM_Undefined;
+ pOut->flags = (pOut->flags&~(MEM_Undefined|MEM_AffMask))|MEM_Null;
break;
}
Mem *pVar; /* Value being transferred */
assert( pOp->p1>0 && pOp->p1<=p->nVar );
- assert( pOp->p4.z==0 || pOp->p4.z==p->azVar[pOp->p1-1] );
+ assert( pOp->p4.z==0 || pOp->p4.z==sqlite3VListNumToName(p->pVList,pOp->p1) );
pVar = &p->aVar[pOp->p1 - 1];
if( sqlite3VdbeMemTooBig(pVar) ){
goto too_big;
}
- pOut = out2Prerelease(p, pOp);
+ pOut = &aMem[pOp->p2];
sqlite3VdbeMemShallowCopy(pOut, pVar, MEM_Static);
UPDATE_MAX_BLOBSIZE(pOut);
break;
}
/* Opcode: Move P1 P2 P3 * *
-** Synopsis: r[P2@P3]=r[P1@P3]
+** Synopsis: r[P2@P3]=r[P1@P3]
**
** Move the P3 values in register P1..P1+P3-1 over into
** registers P2..P2+P3-1. Registers P1..P1+P3-1 are
pIn1 = &aMem[p1];
pOut = &aMem[p2];
do{
- assert( pOut<=&aMem[(p->nMem-p->nCursor)] );
- assert( pIn1<=&aMem[(p->nMem-p->nCursor)] );
+ assert( pOut<=&aMem[(p->nMem+1 - p->nCursor)] );
+ assert( pIn1<=&aMem[(p->nMem+1 - p->nCursor)] );
assert( memIsValid(pIn1) );
memAboutToChange(p, pOut);
sqlite3VdbeMemMove(pOut, pIn1);
break;
}
+/* Opcode: IntCopy P1 P2 * * *
+** Synopsis: r[P2]=r[P1]
+**
+** Transfer the integer value held in register P1 into register P2.
+**
+** This is an optimized version of SCopy that works only for integer
+** values.
+*/
+case OP_IntCopy: { /* out2 */
+ pIn1 = &aMem[pOp->p1];
+ assert( (pIn1->flags & MEM_Int)!=0 );
+ pOut = &aMem[pOp->p2];
+ sqlite3VdbeMemSetInt64(pOut, pIn1->u.i);
+ break;
+}
+
/* Opcode: ResultRow P1 P2 * * *
-** Synopsis: output=r[P1@P2]
+** Synopsis: output=r[P1@P2]
**
** The registers P1 through P1+P2-1 contain a single row of
** results. This opcode causes the sqlite3_step() call to terminate
int i;
assert( p->nResColumn==pOp->p2 );
assert( pOp->p1>0 );
- assert( pOp->p1+pOp->p2<=(p->nMem-p->nCursor)+1 );
+ assert( pOp->p1+pOp->p2<=(p->nMem+1 - p->nCursor)+1 );
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
/* Run the progress counter just before returning.
*/
if( db->xProgress!=0
- && nVmStep>=nProgressLimit
+ && nVmStep>=nProgressLimit
&& db->xProgress(db->pProgressArg)!=0
){
rc = SQLITE_INTERRUPT;
- goto vdbe_error_halt;
+ goto abort_due_to_error;
}
#endif
if( SQLITE_OK!=(rc = sqlite3VdbeCheckFk(p, 0)) ){
assert( db->flags&SQLITE_CountRows );
assert( p->usesStmtJournal );
- break;
+ goto abort_due_to_error;
}
/* If the SQLITE_CountRows flag is set in sqlite3.flags mask, then
*/
assert( p->iStatement==0 || db->flags&SQLITE_CountRows );
rc = sqlite3VdbeCloseStatement(p, SAVEPOINT_RELEASE);
- if( NEVER(rc!=SQLITE_OK) ){
- break;
- }
+ assert( rc==SQLITE_OK );
/* Invalidate all ephemeral cursor row caches */
p->cacheCtr = (p->cacheCtr + 2)|1;
}
if( db->mallocFailed ) goto no_mem;
+ if( db->mTrace & SQLITE_TRACE_ROW ){
+ db->xTrace(SQLITE_TRACE_ROW, db->pTraceArg, p, 0);
+ }
+
/* Return SQLITE_ROW
*/
p->pc = (int)(pOp - aOp) + 1;
}
/* Opcode: Add P1 P2 P3 * *
-** Synopsis: r[P3]=r[P1]+r[P2]
+** Synopsis: r[P3]=r[P1]+r[P2]
**
** Add the value in register P1 to the value in register P2
** and store the result in register P3.
** If either input is NULL, the result is NULL.
*/
/* Opcode: Multiply P1 P2 P3 * *
-** Synopsis: r[P3]=r[P1]*r[P2]
+** Synopsis: r[P3]=r[P1]*r[P2]
**
**
** Multiply the value in register P1 by the value in register P2
** If either input is NULL, the result is NULL.
*/
/* Opcode: Subtract P1 P2 P3 * *
-** Synopsis: r[P3]=r[P2]-r[P1]
+** Synopsis: r[P3]=r[P2]-r[P1]
**
** Subtract the value in register P1 from the value in register P2
** and store the result in register P3.
** If either input is NULL, the result is NULL.
*/
/* Opcode: Divide P1 P2 P3 * *
-** Synopsis: r[P3]=r[P2]/r[P1]
+** Synopsis: r[P3]=r[P2]/r[P1]
**
** Divide the value in register P1 by the value in register P2
** and store the result in register P3 (P3=P2/P1). If the value in
** NULL, the result is NULL.
*/
/* Opcode: Remainder P1 P2 P3 * *
-** Synopsis: r[P3]=r[P2]%r[P1]
+** Synopsis: r[P3]=r[P2]%r[P1]
**
** Compute the remainder after integer register P2 is divided by
** register P1 and store the result in register P3.
type2 = numericType(pIn2);
pOut = &aMem[pOp->p3];
flags = pIn1->flags | pIn2->flags;
- if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null;
if( (type1 & type2 & MEM_Int)!=0 ){
iA = pIn1->u.i;
iB = pIn2->u.i;
}
pOut->u.i = iB;
MemSetTypeFlag(pOut, MEM_Int);
+ }else if( (flags & MEM_Null)!=0 ){
+ goto arithmetic_result_is_null;
}else{
bIntint = 0;
fp_math:
/* Opcode: CollSeq P1 * * P4
**
-** P4 is a pointer to a CollSeq struct. If the next call to a user function
+** P4 is a pointer to a CollSeq object. If the next call to a user function
** or aggregate calls sqlite3GetFuncCollSeq(), this collation sequence will
** be returned. This is used by the built-in min(), max() and nullif()
** functions.
break;
}
-/* Opcode: Function0 P1 P2 P3 P4 P5
-** Synopsis: r[P3]=func(r[P2@P5])
-**
-** Invoke a user function (P4 is a pointer to a FuncDef object that
-** defines the function) with P5 arguments taken from register P2 and
-** successors. The result of the function is stored in register P3.
-** Register P3 must not be one of the function inputs.
-**
-** P1 is a 32-bit bitmask indicating whether or not each argument to the
-** function was determined to be constant at compile time. If the first
-** argument was constant then bit 0 of P1 is set. This is used to determine
-** whether meta data associated with a user function argument using the
-** sqlite3_set_auxdata() API may be safely retained until the next
-** invocation of this opcode.
-**
-** See also: Function, AggStep, AggFinal
-*/
-/* Opcode: Function P1 P2 P3 P4 P5
-** Synopsis: r[P3]=func(r[P2@P5])
-**
-** Invoke a user function (P4 is a pointer to an sqlite3_context object that
-** contains a pointer to the function to be run) with P5 arguments taken
-** from register P2 and successors. The result of the function is stored
-** in register P3. Register P3 must not be one of the function inputs.
-**
-** P1 is a 32-bit bitmask indicating whether or not each argument to the
-** function was determined to be constant at compile time. If the first
-** argument was constant then bit 0 of P1 is set. This is used to determine
-** whether meta data associated with a user function argument using the
-** sqlite3_set_auxdata() API may be safely retained until the next
-** invocation of this opcode.
-**
-** SQL functions are initially coded as OP_Function0 with P4 pointing
-** to a FuncDef object. But on first evaluation, the P4 operand is
-** automatically converted into an sqlite3_context object and the operation
-** changed to this OP_Function opcode. In this way, the initialization of
-** the sqlite3_context object occurs only once, rather than once for each
-** evaluation of the function.
-**
-** See also: Function0, AggStep, AggFinal
-*/
-case OP_Function0: {
- int n;
- sqlite3_context *pCtx;
-
- assert( pOp->p4type==P4_FUNCDEF );
- n = pOp->p5;
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
- assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem-p->nCursor)+1) );
- assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n );
- pCtx = sqlite3DbMallocRaw(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*));
- if( pCtx==0 ) goto no_mem;
- pCtx->pOut = 0;
- pCtx->pFunc = pOp->p4.pFunc;
- pCtx->iOp = (int)(pOp - aOp);
- pCtx->pVdbe = p;
- pCtx->argc = n;
- pOp->p4type = P4_FUNCCTX;
- pOp->p4.pCtx = pCtx;
- pOp->opcode = OP_Function;
- /* Fall through into OP_Function */
-}
-case OP_Function: {
- int i;
- sqlite3_context *pCtx;
-
- assert( pOp->p4type==P4_FUNCCTX );
- pCtx = pOp->p4.pCtx;
-
- /* If this function is inside of a trigger, the register array in aMem[]
- ** might change from one evaluation to the next. The next block of code
- ** checks to see if the register array has changed, and if so it
- ** reinitializes the relavant parts of the sqlite3_context object */
- pOut = &aMem[pOp->p3];
- if( pCtx->pOut != pOut ){
- pCtx->pOut = pOut;
- for(i=pCtx->argc-1; i>=0; i--) pCtx->argv[i] = &aMem[pOp->p2+i];
- }
-
- memAboutToChange(p, pCtx->pOut);
-#ifdef SQLITE_DEBUG
- for(i=0; i<pCtx->argc; i++){
- assert( memIsValid(pCtx->argv[i]) );
- REGISTER_TRACE(pOp->p2+i, pCtx->argv[i]);
- }
-#endif
- MemSetTypeFlag(pCtx->pOut, MEM_Null);
- pCtx->fErrorOrAux = 0;
- db->lastRowid = lastRowid;
- (*pCtx->pFunc->xFunc)(pCtx, pCtx->argc, pCtx->argv); /* IMP: R-24505-23230 */
- lastRowid = db->lastRowid; /* Remember rowid changes made by xFunc */
-
- /* If the function returned an error, throw an exception */
- if( pCtx->fErrorOrAux ){
- if( pCtx->isError ){
- sqlite3VdbeError(p, "%s", sqlite3_value_text(pCtx->pOut));
- rc = pCtx->isError;
- }
- sqlite3VdbeDeleteAuxData(p, pCtx->iOp, pOp->p1);
- }
-
- /* Copy the result of the function into register P3 */
- if( pOut->flags & (MEM_Str|MEM_Blob) ){
- sqlite3VdbeChangeEncoding(pCtx->pOut, encoding);
- if( sqlite3VdbeMemTooBig(pCtx->pOut) ) goto too_big;
- }
-
- REGISTER_TRACE(pOp->p3, pCtx->pOut);
- UPDATE_MAX_BLOBSIZE(pCtx->pOut);
- break;
-}
-
/* Opcode: BitAnd P1 P2 P3 * *
-** Synopsis: r[P3]=r[P1]&r[P2]
+** Synopsis: r[P3]=r[P1]&r[P2]
**
** Take the bit-wise AND of the values in register P1 and P2 and
** store the result in register P3.
** If either input is NULL, the result is NULL.
*/
/* Opcode: BitOr P1 P2 P3 * *
-** Synopsis: r[P3]=r[P1]|r[P2]
+** Synopsis: r[P3]=r[P1]|r[P2]
**
** Take the bit-wise OR of the values in register P1 and P2 and
** store the result in register P3.
** If either input is NULL, the result is NULL.
*/
/* Opcode: ShiftLeft P1 P2 P3 * *
-** Synopsis: r[P3]=r[P2]<<r[P1]
+** Synopsis: r[P3]=r[P2]<<r[P1]
**
** Shift the integer value in register P2 to the left by the
** number of bits specified by the integer in register P1.
** If either input is NULL, the result is NULL.
*/
/* Opcode: ShiftRight P1 P2 P3 * *
-** Synopsis: r[P3]=r[P2]>>r[P1]
+** Synopsis: r[P3]=r[P2]>>r[P1]
**
** Shift the integer value in register P2 to the right by the
** number of bits specified by the integer in register P1.
}
/* Opcode: AddImm P1 P2 * * *
-** Synopsis: r[P1]=r[P1]+P2
+** Synopsis: r[P1]=r[P1]+P2
**
** Add the constant P2 to the value in register P1.
** The result is always an integer.
** Force the value in register P1 to be the type defined by P2.
**
** <ul>
-** <li value="97"> TEXT
-** <li value="98"> BLOB
-** <li value="99"> NUMERIC
-** <li value="100"> INTEGER
-** <li value="101"> REAL
+** <li> P2=='A' → BLOB
+** <li> P2=='B' → TEXT
+** <li> P2=='C' → NUMERIC
+** <li> P2=='D' → INTEGER
+** <li> P2=='E' → REAL
** </ul>
**
** A NULL value is not changed by this routine. It remains NULL.
rc = ExpandBlob(pIn1);
sqlite3VdbeMemCast(pIn1, pOp->p2, encoding);
UPDATE_MAX_BLOBSIZE(pIn1);
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* SQLITE_OMIT_CAST */
-/* Opcode: Lt P1 P2 P3 P4 P5
-** Synopsis: if r[P1]<r[P3] goto P2
+/* Opcode: Eq P1 P2 P3 P4 P5
+** Synopsis: IF r[P3]==r[P1]
**
-** Compare the values in register P1 and P3. If reg(P3)<reg(P1) then
-** jump to address P2.
-**
-** If the SQLITE_JUMPIFNULL bit of P5 is set and either reg(P1) or
-** reg(P3) is NULL then take the jump. If the SQLITE_JUMPIFNULL
-** bit is clear then fall through if either operand is NULL.
+** Compare the values in register P1 and P3. If reg(P3)==reg(P1) then
+** jump to address P2. Or if the SQLITE_STOREP2 flag is set in P5, then
+** store the result of comparison in register P2.
**
** The SQLITE_AFF_MASK portion of P5 must be an affinity character -
** SQLITE_AFF_TEXT, SQLITE_AFF_INTEGER, and so forth. An attempt is made
** the values are compared. If both values are blobs then memcmp() is
** used to determine the results of the comparison. If both values
** are text, then the appropriate collating function specified in
-** P4 is used to do the comparison. If P4 is not specified then
+** P4 is used to do the comparison. If P4 is not specified then
** memcmp() is used to compare text string. If both values are
** numeric, then a numeric comparison is used. If the two values
** are of different types, then numbers are considered less than
** strings and strings are considered less than blobs.
**
-** If the SQLITE_STOREP2 bit of P5 is set, then do not jump. Instead,
-** store a boolean result (either 0, or 1, or NULL) in register P2.
+** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
+** true or false and is never NULL. If both operands are NULL then the result
+** of comparison is true. If either operand is NULL then the result is false.
+** If neither operand is NULL the result is the same as it would be if
+** the SQLITE_NULLEQ flag were omitted from P5.
**
-** If the SQLITE_NULLEQ bit is set in P5, then NULL values are considered
-** equal to one another, provided that they do not have their MEM_Cleared
-** bit set.
+** If both SQLITE_STOREP2 and SQLITE_KEEPNULL flags are set then the
+** content of r[P2] is only changed if the new value is NULL or 0 (false).
+** In other words, a prior r[P2] value will not be overwritten by 1 (true).
*/
/* Opcode: Ne P1 P2 P3 P4 P5
-** Synopsis: if r[P1]!=r[P3] goto P2
+** Synopsis: IF r[P3]!=r[P1]
**
-** This works just like the Lt opcode except that the jump is taken if
-** the operands in registers P1 and P3 are not equal. See the Lt opcode for
+** This works just like the Eq opcode except that the jump is taken if
+** the operands in registers P1 and P3 are not equal. See the Eq opcode for
** additional information.
**
-** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
-** true or false and is never NULL. If both operands are NULL then the result
-** of comparison is false. If either operand is NULL then the result is true.
-** If neither operand is NULL the result is the same as it would be if
-** the SQLITE_NULLEQ flag were omitted from P5.
+** If both SQLITE_STOREP2 and SQLITE_KEEPNULL flags are set then the
+** content of r[P2] is only changed if the new value is NULL or 1 (true).
+** In other words, a prior r[P2] value will not be overwritten by 0 (false).
*/
-/* Opcode: Eq P1 P2 P3 P4 P5
-** Synopsis: if r[P1]==r[P3] goto P2
+/* Opcode: Lt P1 P2 P3 P4 P5
+** Synopsis: IF r[P3]<r[P1]
**
-** This works just like the Lt opcode except that the jump is taken if
-** the operands in registers P1 and P3 are equal.
-** See the Lt opcode for additional information.
+** Compare the values in register P1 and P3. If reg(P3)<reg(P1) then
+** jump to address P2. Or if the SQLITE_STOREP2 flag is set in P5 store
+** the result of comparison (0 or 1 or NULL) into register P2.
**
-** If SQLITE_NULLEQ is set in P5 then the result of comparison is always either
-** true or false and is never NULL. If both operands are NULL then the result
-** of comparison is true. If either operand is NULL then the result is false.
-** If neither operand is NULL the result is the same as it would be if
-** the SQLITE_NULLEQ flag were omitted from P5.
+** If the SQLITE_JUMPIFNULL bit of P5 is set and either reg(P1) or
+** reg(P3) is NULL then the take the jump. If the SQLITE_JUMPIFNULL
+** bit is clear then fall through if either operand is NULL.
+**
+** The SQLITE_AFF_MASK portion of P5 must be an affinity character -
+** SQLITE_AFF_TEXT, SQLITE_AFF_INTEGER, and so forth. An attempt is made
+** to coerce both inputs according to this affinity before the
+** comparison is made. If the SQLITE_AFF_MASK is 0x00, then numeric
+** affinity is used. Note that the affinity conversions are stored
+** back into the input registers P1 and P3. So this opcode can cause
+** persistent changes to registers P1 and P3.
+**
+** Once any conversions have taken place, and neither value is NULL,
+** the values are compared. If both values are blobs then memcmp() is
+** used to determine the results of the comparison. If both values
+** are text, then the appropriate collating function specified in
+** P4 is used to do the comparison. If P4 is not specified then
+** memcmp() is used to compare text string. If both values are
+** numeric, then a numeric comparison is used. If the two values
+** are of different types, then numbers are considered less than
+** strings and strings are considered less than blobs.
*/
/* Opcode: Le P1 P2 P3 P4 P5
-** Synopsis: if r[P1]<=r[P3] goto P2
+** Synopsis: IF r[P3]<=r[P1]
**
** This works just like the Lt opcode except that the jump is taken if
** the content of register P3 is less than or equal to the content of
** register P1. See the Lt opcode for additional information.
*/
/* Opcode: Gt P1 P2 P3 P4 P5
-** Synopsis: if r[P1]>r[P3] goto P2
+** Synopsis: IF r[P3]>r[P1]
**
** This works just like the Lt opcode except that the jump is taken if
** the content of register P3 is greater than the content of
** register P1. See the Lt opcode for additional information.
*/
/* Opcode: Ge P1 P2 P3 P4 P5
-** Synopsis: if r[P1]>=r[P3] goto P2
+** Synopsis: IF r[P3]>=r[P1]
**
** This works just like the Lt opcode except that the jump is taken if
** the content of register P3 is greater than or equal to the content of
case OP_Le: /* same as TK_LE, jump, in1, in3 */
case OP_Gt: /* same as TK_GT, jump, in1, in3 */
case OP_Ge: { /* same as TK_GE, jump, in1, in3 */
- int res; /* Result of the comparison of pIn1 against pIn3 */
+ int res, res2; /* Result of the comparison of pIn1 against pIn3 */
char affinity; /* Affinity to use for comparison */
u16 flags1; /* Copy of initial value of pIn1->flags */
u16 flags3; /* Copy of initial value of pIn3->flags */
assert( pOp->opcode==OP_Eq || pOp->opcode==OP_Ne );
assert( (flags1 & MEM_Cleared)==0 );
assert( (pOp->p5 & SQLITE_JUMPIFNULL)==0 );
- if( (flags1&MEM_Null)!=0
- && (flags3&MEM_Null)!=0
+ if( (flags1&flags3&MEM_Null)!=0
&& (flags3&MEM_Cleared)==0
){
- res = 0; /* Results are equal */
+ res = 0; /* Operands are equal */
}else{
- res = 1; /* Results are not equal */
+ res = 1; /* Operands are not equal */
}
}else{
/* SQLITE_NULLEQ is clear and at least one operand is NULL,
*/
if( pOp->p5 & SQLITE_STOREP2 ){
pOut = &aMem[pOp->p2];
+ iCompare = 1; /* Operands are not equal */
+ memAboutToChange(p, pOut);
MemSetTypeFlag(pOut, MEM_Null);
REGISTER_TRACE(pOp->p2, pOut);
}else{
/* Neither operand is NULL. Do a comparison. */
affinity = pOp->p5 & SQLITE_AFF_MASK;
if( affinity>=SQLITE_AFF_NUMERIC ){
- if( (pIn1->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
- applyNumericAffinity(pIn1,0);
+ if( (flags1 | flags3)&MEM_Str ){
+ if( (flags1 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
+ applyNumericAffinity(pIn1,0);
+ testcase( flags3!=pIn3->flags ); /* Possible if pIn1==pIn3 */
+ flags3 = pIn3->flags;
+ }
+ if( (flags3 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
+ applyNumericAffinity(pIn3,0);
+ }
}
- if( (pIn3->flags & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){
- applyNumericAffinity(pIn3,0);
+ /* Handle the common case of integer comparison here, as an
+ ** optimization, to avoid a call to sqlite3MemCompare() */
+ if( (pIn1->flags & pIn3->flags & MEM_Int)!=0 ){
+ if( pIn3->u.i > pIn1->u.i ){ res = +1; goto compare_op; }
+ if( pIn3->u.i < pIn1->u.i ){ res = -1; goto compare_op; }
+ res = 0;
+ goto compare_op;
}
}else if( affinity==SQLITE_AFF_TEXT ){
- if( (pIn1->flags & MEM_Str)==0 && (pIn1->flags & (MEM_Int|MEM_Real))!=0 ){
+ if( (flags1 & MEM_Str)==0 && (flags1 & (MEM_Int|MEM_Real))!=0 ){
testcase( pIn1->flags & MEM_Int );
testcase( pIn1->flags & MEM_Real );
sqlite3VdbeMemStringify(pIn1, encoding, 1);
testcase( (flags1&MEM_Dyn) != (pIn1->flags&MEM_Dyn) );
flags1 = (pIn1->flags & ~MEM_TypeMask) | (flags1 & MEM_TypeMask);
+ assert( pIn1!=pIn3 );
}
- if( (pIn3->flags & MEM_Str)==0 && (pIn3->flags & (MEM_Int|MEM_Real))!=0 ){
+ if( (flags3 & MEM_Str)==0 && (flags3 & (MEM_Int|MEM_Real))!=0 ){
testcase( pIn3->flags & MEM_Int );
testcase( pIn3->flags & MEM_Real );
sqlite3VdbeMemStringify(pIn3, encoding, 1);
}
}
assert( pOp->p4type==P4_COLLSEQ || pOp->p4.pColl==0 );
- if( pIn1->flags & MEM_Zero ){
- sqlite3VdbeMemExpandBlob(pIn1);
- flags1 &= ~MEM_Zero;
- }
- if( pIn3->flags & MEM_Zero ){
- sqlite3VdbeMemExpandBlob(pIn3);
- flags3 &= ~MEM_Zero;
- }
- if( db->mallocFailed ) goto no_mem;
res = sqlite3MemCompare(pIn3, pIn1, pOp->p4.pColl);
}
- switch( pOp->opcode ){
- case OP_Eq: res = res==0; break;
- case OP_Ne: res = res!=0; break;
- case OP_Lt: res = res<0; break;
- case OP_Le: res = res<=0; break;
- case OP_Gt: res = res>0; break;
- default: res = res>=0; break;
+compare_op:
+ /* At this point, res is negative, zero, or positive if reg[P1] is
+ ** less than, equal to, or greater than reg[P3], respectively. Compute
+ ** the answer to this operator in res2, depending on what the comparison
+ ** operator actually is. The next block of code depends on the fact
+ ** that the 6 comparison operators are consecutive integers in this
+ ** order: NE, EQ, GT, LE, LT, GE */
+ assert( OP_Eq==OP_Ne+1 ); assert( OP_Gt==OP_Ne+2 ); assert( OP_Le==OP_Ne+3 );
+ assert( OP_Lt==OP_Ne+4 ); assert( OP_Ge==OP_Ne+5 );
+ if( res<0 ){ /* ne, eq, gt, le, lt, ge */
+ static const unsigned char aLTb[] = { 1, 0, 0, 1, 1, 0 };
+ res2 = aLTb[pOp->opcode - OP_Ne];
+ }else if( res==0 ){
+ static const unsigned char aEQb[] = { 0, 1, 0, 1, 0, 1 };
+ res2 = aEQb[pOp->opcode - OP_Ne];
+ }else{
+ static const unsigned char aGTb[] = { 1, 0, 1, 0, 0, 1 };
+ res2 = aGTb[pOp->opcode - OP_Ne];
}
/* Undo any changes made by applyAffinity() to the input registers. */
if( pOp->p5 & SQLITE_STOREP2 ){
pOut = &aMem[pOp->p2];
+ iCompare = res;
+ if( (pOp->p5 & SQLITE_KEEPNULL)!=0 ){
+ /* The KEEPNULL flag prevents OP_Eq from overwriting a NULL with 1
+ ** and prevents OP_Ne from overwriting NULL with 0. This flag
+ ** is only used in contexts where either:
+ ** (1) op==OP_Eq && (r[P2]==NULL || r[P2]==0)
+ ** (2) op==OP_Ne && (r[P2]==NULL || r[P2]==1)
+ ** Therefore it is not necessary to check the content of r[P2] for
+ ** NULL. */
+ assert( pOp->opcode==OP_Ne || pOp->opcode==OP_Eq );
+ assert( res2==0 || res2==1 );
+ testcase( res2==0 && pOp->opcode==OP_Eq );
+ testcase( res2==1 && pOp->opcode==OP_Eq );
+ testcase( res2==0 && pOp->opcode==OP_Ne );
+ testcase( res2==1 && pOp->opcode==OP_Ne );
+ if( (pOp->opcode==OP_Eq)==res2 ) break;
+ }
memAboutToChange(p, pOut);
MemSetTypeFlag(pOut, MEM_Int);
- pOut->u.i = res;
+ pOut->u.i = res2;
REGISTER_TRACE(pOp->p2, pOut);
}else{
VdbeBranchTaken(res!=0, (pOp->p5 & SQLITE_NULLEQ)?2:3);
- if( res ){
+ if( res2 ){
goto jump_to_p2;
}
}
break;
}
+/* Opcode: ElseNotEq * P2 * * *
+**
+** This opcode must immediately follow an OP_Lt or OP_Gt comparison operator.
+** If result of an OP_Eq comparison on the same two operands
+** would have be NULL or false (0), then then jump to P2.
+** If the result of an OP_Eq comparison on the two previous operands
+** would have been true (1), then fall through.
+*/
+case OP_ElseNotEq: { /* same as TK_ESCAPE, jump */
+ assert( pOp>aOp );
+ assert( pOp[-1].opcode==OP_Lt || pOp[-1].opcode==OP_Gt );
+ assert( pOp[-1].p5 & SQLITE_STOREP2 );
+ VdbeBranchTaken(iCompare!=0, 2);
+ if( iCompare!=0 ) goto jump_to_p2;
+ break;
+}
+
+
/* Opcode: Permutation * * * P4 *
**
-** Set the permutation used by the OP_Compare operator to be the array
-** of integers in P4.
+** Set the permutation used by the OP_Compare operator in the next
+** instruction. The permutation is stored in the P4 operand.
**
** The permutation is only valid until the next OP_Compare that has
** the OPFLAG_PERMUTE bit set in P5. Typically the OP_Permutation should
** occur immediately prior to the OP_Compare.
+**
+** The first integer in the P4 integer array is the length of the array
+** and does not become part of the permutation.
*/
case OP_Permutation: {
assert( pOp->p4type==P4_INTARRAY );
assert( pOp->p4.ai );
- aPermute = pOp->p4.ai;
+ assert( pOp[1].opcode==OP_Compare );
+ assert( pOp[1].p5 & OPFLAG_PERMUTE );
break;
}
int idx;
CollSeq *pColl; /* Collating sequence to use on this term */
int bRev; /* True for DESCENDING sort order */
+ int *aPermute; /* The permutation */
- if( (pOp->p5 & OPFLAG_PERMUTE)==0 ) aPermute = 0;
+ if( (pOp->p5 & OPFLAG_PERMUTE)==0 ){
+ aPermute = 0;
+ }else{
+ assert( pOp>aOp );
+ assert( pOp[-1].opcode==OP_Permutation );
+ assert( pOp[-1].p4type==P4_INTARRAY );
+ aPermute = pOp[-1].p4.ai + 1;
+ assert( aPermute!=0 );
+ }
n = pOp->p3;
pKeyInfo = pOp->p4.pKeyInfo;
assert( n>0 );
assert( pKeyInfo!=0 );
p1 = pOp->p1;
p2 = pOp->p2;
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
if( aPermute ){
int k, mx = 0;
for(k=0; k<n; k++) if( aPermute[k]>mx ) mx = aPermute[k];
- assert( p1>0 && p1+mx<=(p->nMem-p->nCursor)+1 );
- assert( p2>0 && p2+mx<=(p->nMem-p->nCursor)+1 );
+ assert( p1>0 && p1+mx<=(p->nMem+1 - p->nCursor)+1 );
+ assert( p2>0 && p2+mx<=(p->nMem+1 - p->nCursor)+1 );
}else{
- assert( p1>0 && p1+n<=(p->nMem-p->nCursor)+1 );
- assert( p2>0 && p2+n<=(p->nMem-p->nCursor)+1 );
+ assert( p1>0 && p1+n<=(p->nMem+1 - p->nCursor)+1 );
+ assert( p2>0 && p2+n<=(p->nMem+1 - p->nCursor)+1 );
}
#endif /* SQLITE_DEBUG */
for(i=0; i<n; i++){
assert( memIsValid(&aMem[p2+idx]) );
REGISTER_TRACE(p1+idx, &aMem[p1+idx]);
REGISTER_TRACE(p2+idx, &aMem[p2+idx]);
- assert( i<pKeyInfo->nField );
+ assert( i<pKeyInfo->nKeyField );
pColl = pKeyInfo->aColl[i];
bRev = pKeyInfo->aSortOrder[i];
iCompare = sqlite3MemCompare(&aMem[p1+idx], &aMem[p2+idx], pColl);
break;
}
}
- aPermute = 0;
break;
}
int v1; /* Left operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */
int v2; /* Right operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */
- pIn1 = &aMem[pOp->p1];
- if( pIn1->flags & MEM_Null ){
- v1 = 2;
- }else{
- v1 = sqlite3VdbeIntValue(pIn1)!=0;
- }
- pIn2 = &aMem[pOp->p2];
- if( pIn2->flags & MEM_Null ){
- v2 = 2;
- }else{
- v2 = sqlite3VdbeIntValue(pIn2)!=0;
- }
+ v1 = sqlite3VdbeBooleanValue(&aMem[pOp->p1], 2);
+ v2 = sqlite3VdbeBooleanValue(&aMem[pOp->p2], 2);
if( pOp->opcode==OP_And ){
static const unsigned char and_logic[] = { 0, 0, 0, 0, 1, 2, 0, 2, 2 };
v1 = and_logic[v1*3+v2];
break;
}
+/* Opcode: IsTrue P1 P2 P3 P4 *
+** Synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4
+**
+** This opcode implements the IS TRUE, IS FALSE, IS NOT TRUE, and
+** IS NOT FALSE operators.
+**
+** Interpret the value in register P1 as a boolean value. Store that
+** boolean (a 0 or 1) in register P2. Or if the value in register P1 is
+** NULL, then the P3 is stored in register P2. Invert the answer if P4
+** is 1.
+**
+** The logic is summarized like this:
+**
+** <ul>
+** <li> If P3==0 and P4==0 then r[P2] := r[P1] IS TRUE
+** <li> If P3==1 and P4==1 then r[P2] := r[P1] IS FALSE
+** <li> If P3==0 and P4==1 then r[P2] := r[P1] IS NOT TRUE
+** <li> If P3==1 and P4==0 then r[P2] := r[P1] IS NOT FALSE
+** </ul>
+*/
+case OP_IsTrue: { /* in1, out2 */
+ assert( pOp->p4type==P4_INT32 );
+ assert( pOp->p4.i==0 || pOp->p4.i==1 );
+ assert( pOp->p3==0 || pOp->p3==1 );
+ sqlite3VdbeMemSetInt64(&aMem[pOp->p2],
+ sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3) ^ pOp->p4.i);
+ break;
+}
+
/* Opcode: Not P1 P2 * * *
** Synopsis: r[P2]= !r[P1]
**
case OP_Not: { /* same as TK_NOT, in1, out2 */
pIn1 = &aMem[pOp->p1];
pOut = &aMem[pOp->p2];
- sqlite3VdbeMemSetNull(pOut);
if( (pIn1->flags & MEM_Null)==0 ){
- pOut->flags = MEM_Int;
- pOut->u.i = !sqlite3VdbeIntValue(pIn1);
+ sqlite3VdbeMemSetInt64(pOut, !sqlite3VdbeBooleanValue(pIn1,0));
+ }else{
+ sqlite3VdbeMemSetNull(pOut);
}
break;
}
/* Opcode: Once P1 P2 * * *
**
-** Check the "once" flag number P1. If it is set, jump to instruction P2.
-** Otherwise, set the flag and fall through to the next instruction.
-** In other words, this opcode causes all following opcodes up through P2
-** (but not including P2) to run just once and to be skipped on subsequent
-** times through the loop.
+** Fall through to the next instruction the first time this opcode is
+** encountered on each invocation of the byte-code program. Jump to P2
+** on the second and all subsequent encounters during the same invocation.
+**
+** Top-level programs determine first invocation by comparing the P1
+** operand against the P1 operand on the OP_Init opcode at the beginning
+** of the program. If the P1 values differ, then fall through and make
+** the P1 of this opcode equal to the P1 of OP_Init. If P1 values are
+** the same then take the jump.
**
-** All "once" flags are initially cleared whenever a prepared statement
-** first begins to run.
+** For subprograms, there is a bitmask in the VdbeFrame that determines
+** whether or not the jump should be taken. The bitmask is necessary
+** because the self-altering code trick does not work for recursive
+** triggers.
*/
case OP_Once: { /* jump */
- assert( pOp->p1<p->nOnceFlag );
- VdbeBranchTaken(p->aOnceFlag[pOp->p1]!=0, 2);
- if( p->aOnceFlag[pOp->p1] ){
- goto jump_to_p2;
+ u32 iAddr; /* Address of this instruction */
+ assert( p->aOp[0].opcode==OP_Init );
+ if( p->pFrame ){
+ iAddr = (int)(pOp - p->aOp);
+ if( (p->pFrame->aOnce[iAddr/8] & (1<<(iAddr & 7)))!=0 ){
+ VdbeBranchTaken(1, 2);
+ goto jump_to_p2;
+ }
+ p->pFrame->aOnce[iAddr/8] |= 1<<(iAddr & 7);
}else{
- p->aOnceFlag[pOp->p1] = 1;
+ if( p->aOp[0].p1==pOp->p1 ){
+ VdbeBranchTaken(1, 2);
+ goto jump_to_p2;
+ }
}
+ VdbeBranchTaken(0, 2);
+ pOp->p1 = p->aOp[0].p1;
break;
}
** is considered true if it is numeric and non-zero. If the value
** in P1 is NULL then take the jump if and only if P3 is non-zero.
*/
+case OP_If: { /* jump, in1 */
+ int c;
+ c = sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3);
+ VdbeBranchTaken(c!=0, 2);
+ if( c ) goto jump_to_p2;
+ break;
+}
+
/* Opcode: IfNot P1 P2 P3 * *
**
** Jump to P2 if the value in register P1 is False. The value
** is considered false if it has a numeric value of zero. If the value
** in P1 is NULL then take the jump if and only if P3 is non-zero.
*/
-case OP_If: /* jump, in1 */
case OP_IfNot: { /* jump, in1 */
int c;
- pIn1 = &aMem[pOp->p1];
- if( pIn1->flags & MEM_Null ){
- c = pOp->p3;
- }else{
-#ifdef SQLITE_OMIT_FLOATING_POINT
- c = sqlite3VdbeIntValue(pIn1)!=0;
-#else
- c = sqlite3VdbeRealValue(pIn1)!=0.0;
-#endif
- if( pOp->opcode==OP_IfNot ) c = !c;
- }
+ c = !sqlite3VdbeBooleanValue(&aMem[pOp->p1], !pOp->p3);
VdbeBranchTaken(c!=0, 2);
- if( c ){
- goto jump_to_p2;
- }
+ if( c ) goto jump_to_p2;
break;
}
/* Opcode: IsNull P1 P2 * * *
-** Synopsis: if r[P1]==NULL goto P2
+** Synopsis: if r[P1]==NULL goto P2
**
** Jump to P2 if the value in register P1 is NULL.
*/
break;
}
+/* Opcode: IfNullRow P1 P2 P3 * *
+** Synopsis: if P1.nullRow then r[P3]=NULL, goto P2
+**
+** Check the cursor P1 to see if it is currently pointing at a NULL row.
+** If it is, then set register P3 to NULL and jump immediately to P2.
+** If P1 is not on a NULL row, then fall through without making any
+** changes.
+*/
+case OP_IfNullRow: { /* jump */
+ assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+ assert( p->apCsr[pOp->p1]!=0 );
+ if( p->apCsr[pOp->p1]->nullRow ){
+ sqlite3VdbeMemSetNull(aMem + pOp->p3);
+ goto jump_to_p2;
+ }
+ break;
+}
+
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
+/* Opcode: Offset P1 P2 P3 * *
+** Synopsis: r[P3] = sqlite_offset(P1)
+**
+** Store in register r[P3] the byte offset into the database file that is the
+** start of the payload for the record at which that cursor P1 is currently
+** pointing.
+**
+** P2 is the column number for the argument to the sqlite_offset() function.
+** This opcode does not use P2 itself, but the P2 value is used by the
+** code generator. The P1, P2, and P3 operands to this opcode are the
+** same as for OP_Column.
+**
+** This opcode is only available if SQLite is compiled with the
+** -DSQLITE_ENABLE_OFFSET_SQL_FUNC option.
+*/
+case OP_Offset: { /* out3 */
+ VdbeCursor *pC; /* The VDBE cursor */
+ assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+ pC = p->apCsr[pOp->p1];
+ pOut = &p->aMem[pOp->p3];
+ if( NEVER(pC==0) || pC->eCurType!=CURTYPE_BTREE ){
+ sqlite3VdbeMemSetNull(pOut);
+ }else{
+ sqlite3VdbeMemSetInt64(pOut, sqlite3BtreeOffset(pC->uc.pCursor));
+ }
+ break;
+}
+#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */
+
/* Opcode: Column P1 P2 P3 P4 P5
-** Synopsis: r[P3]=PX
+** Synopsis: r[P3]=PX
**
** Interpret the data that cursor P1 points to as a structure built using
** the MakeRecord instruction. (See the MakeRecord opcode for additional
**
** The value extracted is stored in register P3.
**
-** If the column contains fewer than P2 fields, then extract a NULL. Or,
+** If the record contains fewer than P2 fields, then extract a NULL. Or,
** if the P4 argument is a P4_MEM use the value of the P4 argument as
** the result.
**
** The first OP_Column against a pseudo-table after the value of the content
** register has changed should have this bit set.
**
-** If the OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG bits are set on P5 when
+** If the OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG bits are set on P5 then
** the result is guaranteed to only be used as the argument of a length()
** or typeof() function, respectively. The loading of large blobs can be
** skipped for length() and all content loading can be skipped for typeof().
*/
case OP_Column: {
- i64 payloadSize64; /* Number of bytes in the record */
int p2; /* column number to retrieve */
VdbeCursor *pC; /* The VDBE cursor */
BtCursor *pCrsr; /* The BTree cursor */
const u8 *zData; /* Part of the record being decoded */
const u8 *zHdr; /* Next unparsed byte of the header */
const u8 *zEndHdr; /* Pointer to first byte after the header */
- u32 offset; /* Offset into the data */
- u32 szField; /* Number of bytes in the content of a field */
- u32 avail; /* Number of bytes of available data */
+ u64 offset64; /* 64-bit offset */
u32 t; /* A type code from the record header */
- u16 fx; /* pDest->flags value */
Mem *pReg; /* PseudoTable input register */
+ pC = p->apCsr[pOp->p1];
p2 = pOp->p2;
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
+
+ /* If the cursor cache is stale (meaning it is not currently point at
+ ** the correct row) then bring it up-to-date by doing the necessary
+ ** B-Tree seek. */
+ rc = sqlite3VdbeCursorMoveto(&pC, &p2);
+ if( rc ) goto abort_due_to_error;
+
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
pDest = &aMem[pOp->p3];
memAboutToChange(p, pDest);
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
- pC = p->apCsr[pOp->p1];
assert( pC!=0 );
assert( p2<pC->nField );
aOffset = pC->aOffset;
-#ifndef SQLITE_OMIT_VIRTUALTABLE
- assert( pC->pVtabCursor==0 ); /* OP_Column never called on virtual table */
-#endif
- pCrsr = pC->pCursor;
- assert( pCrsr!=0 || pC->pseudoTableReg>0 ); /* pCrsr NULL on PseudoTables */
- assert( pCrsr!=0 || pC->nullRow ); /* pC->nullRow on PseudoTables */
+ assert( pC->eCurType!=CURTYPE_VTAB );
+ assert( pC->eCurType!=CURTYPE_PSEUDO || pC->nullRow );
+ assert( pC->eCurType!=CURTYPE_SORTER );
- /* If the cursor cache is stale, bring it up-to-date */
- rc = sqlite3VdbeCursorMoveto(pC);
- if( rc ) goto abort_due_to_error;
- if( pC->cacheStatus!=p->cacheCtr ){
+ if( pC->cacheStatus!=p->cacheCtr ){ /*OPTIMIZATION-IF-FALSE*/
if( pC->nullRow ){
- if( pCrsr==0 ){
- assert( pC->pseudoTableReg>0 );
- pReg = &aMem[pC->pseudoTableReg];
+ if( pC->eCurType==CURTYPE_PSEUDO ){
+ /* For the special case of as pseudo-cursor, the seekResult field
+ ** identifies the register that holds the record */
+ assert( pC->seekResult>0 );
+ pReg = &aMem[pC->seekResult];
assert( pReg->flags & MEM_Blob );
assert( memIsValid(pReg) );
- pC->payloadSize = pC->szRow = avail = pReg->n;
+ pC->payloadSize = pC->szRow = pReg->n;
pC->aRow = (u8*)pReg->z;
}else{
sqlite3VdbeMemSetNull(pDest);
goto op_column_out;
}
}else{
+ pCrsr = pC->uc.pCursor;
+ assert( pC->eCurType==CURTYPE_BTREE );
assert( pCrsr );
- if( pC->isTable==0 ){
- assert( sqlite3BtreeCursorIsValid(pCrsr) );
- VVA_ONLY(rc =) sqlite3BtreeKeySize(pCrsr, &payloadSize64);
- assert( rc==SQLITE_OK ); /* True because of CursorMoveto() call above */
- /* sqlite3BtreeParseCellPtr() uses getVarint32() to extract the
- ** payload size, so it is impossible for payloadSize64 to be
- ** larger than 32 bits. */
- assert( (payloadSize64 & SQLITE_MAX_U32)==(u64)payloadSize64 );
- pC->aRow = sqlite3BtreeKeyFetch(pCrsr, &avail);
- pC->payloadSize = (u32)payloadSize64;
- }else{
- assert( sqlite3BtreeCursorIsValid(pCrsr) );
- VVA_ONLY(rc =) sqlite3BtreeDataSize(pCrsr, &pC->payloadSize);
- assert( rc==SQLITE_OK ); /* DataSize() cannot fail */
- pC->aRow = sqlite3BtreeDataFetch(pCrsr, &avail);
- }
- assert( avail<=65536 ); /* Maximum page size is 64KiB */
- if( pC->payloadSize <= (u32)avail ){
- pC->szRow = pC->payloadSize;
- }else{
- pC->szRow = avail;
- }
+ assert( sqlite3BtreeCursorIsValid(pCrsr) );
+ pC->payloadSize = sqlite3BtreePayloadSize(pCrsr);
+ pC->aRow = sqlite3BtreePayloadFetch(pCrsr, &pC->szRow);
+ assert( pC->szRow<=pC->payloadSize );
+ assert( pC->szRow<=65536 ); /* Maximum page size is 64KiB */
if( pC->payloadSize > (u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){
goto too_big;
}
}
pC->cacheStatus = p->cacheCtr;
- pC->iHdrOffset = getVarint32(pC->aRow, offset);
+ pC->iHdrOffset = getVarint32(pC->aRow, aOffset[0]);
pC->nHdrParsed = 0;
- aOffset[0] = offset;
- /* Make sure a corrupt database has not given us an oversize header.
- ** Do this now to avoid an oversize memory allocation.
- **
- ** Type entries can be between 1 and 5 bytes each. But 4 and 5 byte
- ** types use so much data space that there can only be 4096 and 32 of
- ** them, respectively. So the maximum header length results from a
- ** 3-byte type for each of the maximum of 32768 columns plus three
- ** extra bytes for the header length itself. 32768*3 + 3 = 98307.
- */
- if( offset > 98307 || offset > pC->payloadSize ){
- rc = SQLITE_CORRUPT_BKPT;
- goto op_column_error;
- }
- if( avail<offset ){
+ if( pC->szRow<aOffset[0] ){ /*OPTIMIZATION-IF-FALSE*/
/* pC->aRow does not have to hold the entire row, but it does at least
** need to cover the header of the record. If pC->aRow does not contain
** the complete header, then set it to zero, forcing the header to be
** dynamically allocated. */
pC->aRow = 0;
pC->szRow = 0;
- }
- /* The following goto is an optimization. It can be omitted and
- ** everything will still work. But OP_Column is measurably faster
- ** by skipping the subsequent conditional, which is always true.
- */
- assert( pC->nHdrParsed<=p2 ); /* Conditional skipped */
- goto op_column_read_header;
+ /* Make sure a corrupt database has not given us an oversize header.
+ ** Do this now to avoid an oversize memory allocation.
+ **
+ ** Type entries can be between 1 and 5 bytes each. But 4 and 5 byte
+ ** types use so much data space that there can only be 4096 and 32 of
+ ** them, respectively. So the maximum header length results from a
+ ** 3-byte type for each of the maximum of 32768 columns plus three
+ ** extra bytes for the header length itself. 32768*3 + 3 = 98307.
+ */
+ if( aOffset[0] > 98307 || aOffset[0] > pC->payloadSize ){
+ goto op_column_corrupt;
+ }
+ }else{
+ /* This is an optimization. By skipping over the first few tests
+ ** (ex: pC->nHdrParsed<=p2) in the next section, we achieve a
+ ** measurable performance gain.
+ **
+ ** This branch is taken even if aOffset[0]==0. Such a record is never
+ ** generated by SQLite, and could be considered corruption, but we
+ ** accept it for historical reasons. When aOffset[0]==0, the code this
+ ** branch jumps to reads past the end of the record, but never more
+ ** than a few bytes. Even if the record occurs at the end of the page
+ ** content area, the "page header" comes after the page content and so
+ ** this overread is harmless. Similar overreads can occur for a corrupt
+ ** database file.
+ */
+ zData = pC->aRow;
+ assert( pC->nHdrParsed<=p2 ); /* Conditional skipped */
+ testcase( aOffset[0]==0 );
+ goto op_column_read_header;
+ }
}
/* Make sure at least the first p2+1 entries of the header have been
/* If there is more header available for parsing in the record, try
** to extract additional fields up through the p2+1-th field
*/
- op_column_read_header:
if( pC->iHdrOffset<aOffset[0] ){
/* Make sure zData points to enough of the record to cover the header. */
if( pC->aRow==0 ){
memset(&sMem, 0, sizeof(sMem));
- rc = sqlite3VdbeMemFromBtree(pCrsr, 0, aOffset[0],
- !pC->isTable, &sMem);
- if( rc!=SQLITE_OK ){
- goto op_column_error;
- }
+ rc = sqlite3VdbeMemFromBtree(pC->uc.pCursor, 0, aOffset[0], &sMem);
+ if( rc!=SQLITE_OK ) goto abort_due_to_error;
zData = (u8*)sMem.z;
}else{
zData = pC->aRow;
}
/* Fill in pC->aType[i] and aOffset[i] values through the p2-th field. */
+ op_column_read_header:
i = pC->nHdrParsed;
- offset = aOffset[i];
+ offset64 = aOffset[i];
zHdr = zData + pC->iHdrOffset;
zEndHdr = zData + aOffset[0];
- assert( i<=p2 && zHdr<zEndHdr );
+ testcase( zHdr>=zEndHdr );
do{
- if( zHdr[0]<0x80 ){
- t = zHdr[0];
+ if( (t = zHdr[0])<0x80 ){
zHdr++;
+ offset64 += sqlite3VdbeOneByteSerialTypeLen(t);
}else{
zHdr += sqlite3GetVarint32(zHdr, &t);
+ offset64 += sqlite3VdbeSerialTypeLen(t);
}
- pC->aType[i] = t;
- szField = sqlite3VdbeSerialTypeLen(t);
- offset += szField;
- if( offset<szField ){ /* True if offset overflows */
- zHdr = &zEndHdr[1]; /* Forces SQLITE_CORRUPT return below */
- break;
- }
- i++;
- aOffset[i] = offset;
+ pC->aType[i++] = t;
+ aOffset[i] = (u32)(offset64 & 0xffffffff);
}while( i<=p2 && zHdr<zEndHdr );
- pC->nHdrParsed = i;
- pC->iHdrOffset = (u32)(zHdr - zData);
- if( pC->aRow==0 ){
- sqlite3VdbeMemRelease(&sMem);
- sMem.flags = MEM_Null;
- }
-
+
/* The record is corrupt if any of the following are true:
** (1) the bytes of the header extend past the declared header size
- ** (zHdr>zEndHdr)
** (2) the entire header was used but not all data was used
- ** (zHdr==zEndHdr && offset!=pC->payloadSize)
** (3) the end of the data extends beyond the end of the record.
- ** (offset > pC->payloadSize)
*/
- if( (zHdr>=zEndHdr && (zHdr>zEndHdr || offset!=pC->payloadSize))
- || (offset > pC->payloadSize)
+ if( (zHdr>=zEndHdr && (zHdr>zEndHdr || offset64!=pC->payloadSize))
+ || (offset64 > pC->payloadSize)
){
- rc = SQLITE_CORRUPT_BKPT;
- goto op_column_error;
+ if( aOffset[0]==0 ){
+ i = 0;
+ zHdr = zEndHdr;
+ }else{
+ if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem);
+ goto op_column_corrupt;
+ }
}
+
+ pC->nHdrParsed = i;
+ pC->iHdrOffset = (u32)(zHdr - zData);
+ if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem);
+ }else{
+ t = 0;
}
/* If after trying to extract new entries from the header, nHdrParsed is
}
goto op_column_out;
}
+ }else{
+ t = pC->aType[p2];
}
/* Extract the content for the p2+1-th column. Control can only
assert( p2<pC->nHdrParsed );
assert( rc==SQLITE_OK );
assert( sqlite3VdbeCheckMemInvariants(pDest) );
- if( VdbeMemDynamic(pDest) ) sqlite3VdbeMemSetNull(pDest);
- t = pC->aType[p2];
+ if( VdbeMemDynamic(pDest) ){
+ sqlite3VdbeMemSetNull(pDest);
+ }
+ assert( t==pC->aType[p2] );
if( pC->szRow>=aOffset[p2+1] ){
/* This is the common case where the desired content fits on the original
** page - where the content is not on an overflow page */
- sqlite3VdbeSerialGet(pC->aRow+aOffset[p2], t, pDest);
+ zData = pC->aRow + aOffset[p2];
+ if( t<12 ){
+ sqlite3VdbeSerialGet(zData, t, pDest);
+ }else{
+ /* If the column value is a string, we need a persistent value, not
+ ** a MEM_Ephem value. This branch is a fast short-cut that is equivalent
+ ** to calling sqlite3VdbeSerialGet() and sqlite3VdbeDeephemeralize().
+ */
+ static const u16 aFlag[] = { MEM_Blob, MEM_Str|MEM_Term };
+ pDest->n = len = (t-12)/2;
+ pDest->enc = encoding;
+ if( pDest->szMalloc < len+2 ){
+ pDest->flags = MEM_Null;
+ if( sqlite3VdbeMemGrow(pDest, len+2, 0) ) goto no_mem;
+ }else{
+ pDest->z = pDest->zMalloc;
+ }
+ memcpy(pDest->z, zData, len);
+ pDest->z[len] = 0;
+ pDest->z[len+1] = 0;
+ pDest->flags = aFlag[t&1];
+ }
}else{
+ pDest->enc = encoding;
/* This branch happens only when content is on overflow pages */
if( ((pOp->p5 & (OPFLAG_LENGTHARG|OPFLAG_TYPEOFARG))!=0
&& ((t>=12 && (t&1)==0) || (pOp->p5 & OPFLAG_TYPEOFARG)!=0))
** 2. the length(X) function if X is a blob, and
** 3. if the content length is zero.
** So we might as well use bogus content rather than reading
- ** content from disk. NULL will work for the value for strings
- ** and blobs and whatever is in the payloadSize64 variable
- ** will work for everything else. */
- sqlite3VdbeSerialGet(t<=13 ? (u8*)&payloadSize64 : 0, t, pDest);
+ ** content from disk.
+ **
+ ** Although sqlite3VdbeSerialGet() may read at most 8 bytes from the
+ ** buffer passed to it, debugging function VdbeMemPrettyPrint() may
+ ** read up to 16. So 16 bytes of bogus content is supplied.
+ */
+ static u8 aZero[16]; /* This is the bogus content */
+ sqlite3VdbeSerialGet(aZero, t, pDest);
}else{
- rc = sqlite3VdbeMemFromBtree(pCrsr, aOffset[p2], len, !pC->isTable,
- pDest);
- if( rc!=SQLITE_OK ){
- goto op_column_error;
- }
+ rc = sqlite3VdbeMemFromBtree(pC->uc.pCursor, aOffset[p2], len, pDest);
+ if( rc!=SQLITE_OK ) goto abort_due_to_error;
sqlite3VdbeSerialGet((const u8*)pDest->z, t, pDest);
pDest->flags &= ~MEM_Ephem;
}
}
- pDest->enc = encoding;
op_column_out:
- /* If the column value is an ephemeral string, go ahead and persist
- ** that string in case the cursor moves before the column value is
- ** used. The following code does the equivalent of Deephemeralize()
- ** but does it faster. */
- if( (pDest->flags & MEM_Ephem)!=0 && pDest->z ){
- fx = pDest->flags & (MEM_Str|MEM_Blob);
- assert( fx!=0 );
- zData = (const u8*)pDest->z;
- len = pDest->n;
- if( sqlite3VdbeMemClearAndResize(pDest, len+2) ) goto no_mem;
- memcpy(pDest->z, zData, len);
- pDest->z[len] = 0;
- pDest->z[len+1] = 0;
- pDest->flags = fx|MEM_Term;
- }
-op_column_error:
UPDATE_MAX_BLOBSIZE(pDest);
REGISTER_TRACE(pOp->p3, pDest);
break;
+
+op_column_corrupt:
+ if( aOp[0].p3>0 ){
+ pOp = &aOp[aOp[0].p3-1];
+ break;
+ }else{
+ rc = SQLITE_CORRUPT_BKPT;
+ goto abort_due_to_error;
+ }
}
/* Opcode: Affinity P1 P2 * P4 *
**
** Apply affinities to a range of P2 registers starting with P1.
**
-** P4 is a string that is P2 characters long. The nth character of the
-** string indicates the column affinity that should be used for the nth
+** P4 is a string that is P2 characters long. The N-th character of the
+** string indicates the column affinity that should be used for the N-th
** memory cell in the range.
*/
case OP_Affinity: {
const char *zAffinity; /* The affinity to be applied */
- char cAff; /* A single character of affinity */
zAffinity = pOp->p4.z;
assert( zAffinity!=0 );
+ assert( pOp->p2>0 );
assert( zAffinity[pOp->p2]==0 );
pIn1 = &aMem[pOp->p1];
- while( (cAff = *(zAffinity++))!=0 ){
- assert( pIn1 <= &p->aMem[(p->nMem-p->nCursor)] );
+ do{
+ assert( pIn1 <= &p->aMem[(p->nMem+1 - p->nCursor)] );
assert( memIsValid(pIn1) );
- applyAffinity(pIn1, cAff, encoding);
+ applyAffinity(pIn1, *(zAffinity++), encoding);
pIn1++;
- }
+ }while( zAffinity[0] );
break;
}
** use as a data record in a database table or as a key
** in an index. The OP_Column opcode can decode the record later.
**
-** P4 may be a string that is P2 characters long. The nth character of the
-** string indicates the column affinity that should be used for the nth
+** P4 may be a string that is P2 characters long. The N-th character of the
+** string indicates the column affinity that should be used for the N-th
** field of the index key.
**
** The mapping from character to affinity is given by the SQLITE_AFF_
int file_format; /* File format to use for encoding */
int i; /* Space used in zNewRecord[] header */
int j; /* Space used in zNewRecord[] content */
- int len; /* Length of a field */
+ u32 len; /* Length of a field */
/* Assuming the record contains N fields, the record format looks
** like this:
nZero = 0; /* Number of zero bytes at the end of the record */
nField = pOp->p1;
zAffinity = pOp->p4.z;
- assert( nField>0 && pOp->p2>0 && pOp->p2+nField<=(p->nMem-p->nCursor)+1 );
+ assert( nField>0 && pOp->p2>0 && pOp->p2+nField<=(p->nMem+1 - p->nCursor)+1 );
pData0 = &aMem[nField];
nField = pOp->p2;
pLast = &pData0[nField-1];
}while( zAffinity[0] );
}
+#ifdef SQLITE_ENABLE_NULL_TRIM
+ /* NULLs can be safely trimmed from the end of the record, as long as
+ ** as the schema format is 2 or more and none of the omitted columns
+ ** have a non-NULL default value. Also, the record must be left with
+ ** at least one field. If P5>0 then it will be one more than the
+ ** index of the right-most column with a non-NULL default value */
+ if( pOp->p5 ){
+ while( (pLast->flags & MEM_Null)!=0 && nField>pOp->p5 ){
+ pLast--;
+ nField--;
+ }
+ }
+#endif
+
/* Loop through the elements that will make up the record to figure
** out how much space is required for the new record.
*/
pRec = pLast;
do{
assert( memIsValid(pRec) );
- pRec->uTemp = serial_type = sqlite3VdbeSerialType(pRec, file_format);
- len = sqlite3VdbeSerialTypeLen(serial_type);
+ serial_type = sqlite3VdbeSerialType(pRec, file_format, &len);
if( pRec->flags & MEM_Zero ){
- if( nData ){
+ if( serial_type==0 ){
+ /* Values with MEM_Null and MEM_Zero are created by xColumn virtual
+ ** table methods that never invoke sqlite3_result_xxxxx() while
+ ** computing an unchanging column value in an UPDATE statement.
+ ** Give such values a special internal-use-only serial-type of 10
+ ** so that they can be passed through to xUpdate and have
+ ** a true sqlite3_value_nochange(). */
+ assert( pOp->p5==OPFLAG_NOCHNG_MAGIC || CORRUPT_DB );
+ serial_type = 10;
+ }else if( nData ){
if( sqlite3VdbeMemExpandBlob(pRec) ) goto no_mem;
}else{
nZero += pRec->u.nZero;
testcase( serial_type==127 );
testcase( serial_type==128 );
nHdr += serial_type<=127 ? 1 : sqlite3VarintLen(serial_type);
- }while( (--pRec)>=pData0 );
+ pRec->uTemp = serial_type;
+ if( pRec==pData0 ) break;
+ pRec--;
+ }while(1);
/* EVIDENCE-OF: R-22564-11647 The header begins with a single varint
** which determines the total number of bytes in the header. The varint
assert( i==nHdr );
assert( j==nByte );
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
pOut->n = (int)nByte;
pOut->flags = MEM_Blob;
if( nZero ){
pOut->u.nZero = nZero;
pOut->flags |= MEM_Zero;
}
- pOut->enc = SQLITE_UTF8; /* In case the blob is ever converted to text */
REGISTER_TRACE(pOp->p3, pOut);
UPDATE_MAX_BLOBSIZE(pOut);
break;
i64 nEntry;
BtCursor *pCrsr;
- pCrsr = p->apCsr[pOp->p1]->pCursor;
+ assert( p->apCsr[pOp->p1]->eCurType==CURTYPE_BTREE );
+ pCrsr = p->apCsr[pOp->p1]->uc.pCursor;
assert( pCrsr );
nEntry = 0; /* Not needed. Only used to silence a warning. */
rc = sqlite3BtreeCount(pCrsr, &nEntry);
+ if( rc ) goto abort_due_to_error;
pOut = out2Prerelease(p, pOp);
pOut->u.i = nEntry;
break;
#endif
/* Create a new savepoint structure. */
- pNew = sqlite3DbMallocRaw(db, sizeof(Savepoint)+nName+1);
+ pNew = sqlite3DbMallocRawNN(db, sizeof(Savepoint)+nName+1);
if( pNew ){
pNew->zName = (char *)&pNew[1];
memcpy(pNew->zName, zName, nName+1);
}else{
db->nSavepoint++;
}
-
+
/* Link the new savepoint into the database handle's list. */
pNew->pNext = db->pSavepoint;
db->pSavepoint = pNew;
int isSchemaChange;
iSavepoint = db->nSavepoint - iSavepoint - 1;
if( p1==SAVEPOINT_ROLLBACK ){
- isSchemaChange = (db->flags & SQLITE_InternChanges)!=0;
+ isSchemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0;
for(ii=0; ii<db->nDb; ii++){
rc = sqlite3BtreeTripAllCursors(db->aDb[ii].pBt,
SQLITE_ABORT_ROLLBACK,
if( isSchemaChange ){
sqlite3ExpirePreparedStatements(db);
sqlite3ResetAllSchemasOfConnection(db);
- db->flags = (db->flags | SQLITE_InternChanges);
+ db->mDbFlags |= DBFLAG_SchemaChange;
}
}
}
}
}
+ if( rc ) goto abort_due_to_error;
break;
}
case OP_AutoCommit: {
int desiredAutoCommit;
int iRollback;
- int turnOnAC;
desiredAutoCommit = pOp->p1;
iRollback = pOp->p2;
- turnOnAC = desiredAutoCommit && !db->autoCommit;
assert( desiredAutoCommit==1 || desiredAutoCommit==0 );
assert( desiredAutoCommit==1 || iRollback==0 );
assert( db->nVdbeActive>0 ); /* At least this one VM is active */
assert( p->bIsReader );
- if( turnOnAC && !iRollback && db->nVdbeWrite>0 ){
- /* If this instruction implements a COMMIT and other VMs are writing
- ** return an error indicating that the other VMs must complete first.
- */
- sqlite3VdbeError(p, "cannot commit transaction - "
- "SQL statements in progress");
- rc = SQLITE_BUSY;
- }else if( desiredAutoCommit!=db->autoCommit ){
+ if( desiredAutoCommit!=db->autoCommit ){
if( iRollback ){
assert( desiredAutoCommit==1 );
sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
db->autoCommit = 1;
+ }else if( desiredAutoCommit && db->nVdbeWrite>0 ){
+ /* If this instruction implements a COMMIT and other VMs are writing
+ ** return an error indicating that the other VMs must complete first.
+ */
+ sqlite3VdbeError(p, "cannot commit transaction - "
+ "SQL statements in progress");
+ rc = SQLITE_BUSY;
+ goto abort_due_to_error;
}else if( (rc = sqlite3VdbeCheckFk(p, 1))!=SQLITE_OK ){
goto vdbe_return;
}else{
"cannot commit - no transaction is active"));
rc = SQLITE_ERROR;
+ goto abort_due_to_error;
}
break;
}
rc = sqlite3BtreeBeginTrans(pBt, pOp->p2);
testcase( rc==SQLITE_BUSY_SNAPSHOT );
testcase( rc==SQLITE_BUSY_RECOVERY );
- if( (rc&0xff)==SQLITE_BUSY ){
- p->pc = (int)(pOp - aOp);
- p->rc = rc;
- goto vdbe_return;
- }
if( rc!=SQLITE_OK ){
+ if( (rc&0xff)==SQLITE_BUSY ){
+ p->pc = (int)(pOp - aOp);
+ p->rc = rc;
+ goto vdbe_return;
+ }
goto abort_due_to_error;
}
}
/* Gather the schema version number for checking:
- ** IMPLEMENTATION-OF: R-32195-19465 The schema version is used by SQLite
- ** each time a query is executed to ensure that the internal cache of the
- ** schema used when compiling the SQL query matches the schema of the
- ** database against which the compiled query is actually executed.
+ ** IMPLEMENTATION-OF: R-03189-51135 As each SQL statement runs, the schema
+ ** version is checked to ensure that the schema has not changed since the
+ ** SQL statement was prepared.
*/
sqlite3BtreeGetMeta(pBt, BTREE_SCHEMA_VERSION, (u32 *)&iMeta);
iGen = db->aDb[pOp->p1].pSchema->iGeneration;
p->expired = 1;
rc = SQLITE_SCHEMA;
}
+ if( rc ) goto abort_due_to_error;
break;
}
/* Opcode: SetCookie P1 P2 P3 * *
**
-** Write the content of register P3 (interpreted as an integer)
-** into cookie number P2 of database P1. P2==1 is the schema version.
-** P2==2 is the database format. P2==3 is the recommended pager cache
+** Write the integer value P3 into cookie number P2 of database P1.
+** P2==1 is the schema version. P2==2 is the database format.
+** P2==3 is the recommended pager cache
** size, and so forth. P1==0 is the main database file and P1==1 is the
** database file used to store temporary tables.
**
** A transaction must be started before executing this opcode.
*/
-case OP_SetCookie: { /* in3 */
+case OP_SetCookie: {
Db *pDb;
assert( pOp->p2<SQLITE_N_BTREE_META );
assert( pOp->p1>=0 && pOp->p1<db->nDb );
pDb = &db->aDb[pOp->p1];
assert( pDb->pBt!=0 );
assert( sqlite3SchemaMutexHeld(db, pOp->p1, 0) );
- pIn3 = &aMem[pOp->p3];
- sqlite3VdbeMemIntegerify(pIn3);
/* See note about index shifting on OP_ReadCookie */
- rc = sqlite3BtreeUpdateMeta(pDb->pBt, pOp->p2, (int)pIn3->u.i);
+ rc = sqlite3BtreeUpdateMeta(pDb->pBt, pOp->p2, pOp->p3);
if( pOp->p2==BTREE_SCHEMA_VERSION ){
/* When the schema cookie changes, record the new cookie internally */
- pDb->pSchema->schema_cookie = (int)pIn3->u.i;
- db->flags |= SQLITE_InternChanges;
+ pDb->pSchema->schema_cookie = pOp->p3;
+ db->mDbFlags |= DBFLAG_SchemaChange;
}else if( pOp->p2==BTREE_FILE_FORMAT ){
/* Record changes in the file format */
- pDb->pSchema->file_format = (u8)pIn3->u.i;
+ pDb->pSchema->file_format = pOp->p3;
}
if( pOp->p1==1 ){
/* Invalidate all prepared statements whenever the TEMP database
sqlite3ExpirePreparedStatements(db);
p->expired = 0;
}
+ if( rc ) goto abort_due_to_error;
break;
}
case OP_OpenRead:
case OP_OpenWrite:
- assert( (pOp->p5&(OPFLAG_P2ISREG|OPFLAG_BULKCSR|OPFLAG_SEEKEQ))==pOp->p5 );
assert( pOp->opcode==OP_OpenWrite || pOp->p5==0 || pOp->p5==OPFLAG_SEEKEQ );
assert( p->bIsReader );
assert( pOp->opcode==OP_OpenRead || pOp->opcode==OP_ReopenIdx
if( p->expired ){
rc = SQLITE_ABORT_ROLLBACK;
- break;
+ goto abort_due_to_error;
}
nField = 0;
pX = pDb->pBt;
assert( pX!=0 );
if( pOp->opcode==OP_OpenWrite ){
- wrFlag = 1;
+ assert( OPFLAG_FORDELETE==BTREE_FORDELETE );
+ wrFlag = BTREE_WRCSR | (pOp->p5 & OPFLAG_FORDELETE);
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
if( pDb->pSchema->file_format < p->minWriteFileFormat ){
p->minWriteFileFormat = pDb->pSchema->file_format;
}
if( pOp->p5 & OPFLAG_P2ISREG ){
assert( p2>0 );
- assert( p2<=(p->nMem-p->nCursor) );
+ assert( p2<=(p->nMem+1 - p->nCursor) );
pIn2 = &aMem[p2];
assert( memIsValid(pIn2) );
assert( (pIn2->flags & MEM_Int)!=0 );
sqlite3VdbeMemIntegerify(pIn2);
p2 = (int)pIn2->u.i;
- /* The p2 value always comes from a prior OP_CreateTable opcode and
+ /* The p2 value always comes from a prior OP_CreateBtree opcode and
** that opcode will always set the p2 value to 2 or more or else fail.
** If there were a failure, the prepared statement would have halted
** before reaching this instruction. */
- if( NEVER(p2<2) ) {
- rc = SQLITE_CORRUPT_BKPT;
- goto abort_due_to_error;
- }
+ assert( p2>=2 );
}
if( pOp->p4type==P4_KEYINFO ){
pKeyInfo = pOp->p4.pKeyInfo;
assert( pKeyInfo->enc==ENC(db) );
assert( pKeyInfo->db==db );
- nField = pKeyInfo->nField+pKeyInfo->nXField;
+ nField = pKeyInfo->nAllField;
}else if( pOp->p4type==P4_INT32 ){
nField = pOp->p4.i;
}
assert( pOp->p1>=0 );
assert( nField>=0 );
testcase( nField==0 ); /* Table with INTEGER PRIMARY KEY and nothing else */
- pCur = allocateCursor(p, pOp->p1, nField, iDb, 1);
+ pCur = allocateCursor(p, pOp->p1, nField, iDb, CURTYPE_BTREE);
if( pCur==0 ) goto no_mem;
pCur->nullRow = 1;
pCur->isOrdered = 1;
pCur->pgnoRoot = p2;
- rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->pCursor);
+#ifdef SQLITE_DEBUG
+ pCur->wrFlag = wrFlag;
+#endif
+ rc = sqlite3BtreeCursor(pX, p2, wrFlag, pKeyInfo, pCur->uc.pCursor);
pCur->pKeyInfo = pKeyInfo;
/* Set the VdbeCursor.isTable variable. Previous versions of
** SQLite used to check if the root-page flags were sane at this point
open_cursor_set_hints:
assert( OPFLAG_BULKCSR==BTREE_BULKLOAD );
assert( OPFLAG_SEEKEQ==BTREE_SEEK_EQ );
- sqlite3BtreeCursorHints(pCur->pCursor,
- (pOp->p5 & (OPFLAG_BULKCSR|OPFLAG_SEEKEQ)));
+ testcase( pOp->p5 & OPFLAG_BULKCSR );
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+ testcase( pOp->p2 & OPFLAG_SEEKEQ );
+#endif
+ sqlite3BtreeCursorHintFlags(pCur->uc.pCursor,
+ (pOp->p5 & (OPFLAG_BULKCSR|OPFLAG_SEEKEQ)));
+ if( rc ) goto abort_due_to_error;
break;
}
+/* Opcode: OpenDup P1 P2 * * *
+**
+** Open a new cursor P1 that points to the same ephemeral table as
+** cursor P2. The P2 cursor must have been opened by a prior OP_OpenEphemeral
+** opcode. Only ephemeral cursors may be duplicated.
+**
+** Duplicate ephemeral cursors are used for self-joins of materialized views.
+*/
+case OP_OpenDup: {
+ VdbeCursor *pOrig; /* The original cursor to be duplicated */
+ VdbeCursor *pCx; /* The new cursor */
+
+ pOrig = p->apCsr[pOp->p2];
+ assert( pOrig->pBtx!=0 ); /* Only ephemeral cursors can be duplicated */
+
+ pCx = allocateCursor(p, pOp->p1, pOrig->nField, -1, CURTYPE_BTREE);
+ if( pCx==0 ) goto no_mem;
+ pCx->nullRow = 1;
+ pCx->isEphemeral = 1;
+ pCx->pKeyInfo = pOrig->pKeyInfo;
+ pCx->isTable = pOrig->isTable;
+ rc = sqlite3BtreeCursor(pOrig->pBtx, MASTER_ROOT, BTREE_WRCSR,
+ pCx->pKeyInfo, pCx->uc.pCursor);
+ /* The sqlite3BtreeCursor() routine can only fail for the first cursor
+ ** opened for a database. Since there is already an open cursor when this
+ ** opcode is run, the sqlite3BtreeCursor() cannot fail */
+ assert( rc==SQLITE_OK );
+ break;
+}
+
+
/* Opcode: OpenEphemeral P1 P2 * P4 P5
** Synopsis: nColumn=P2
**
SQLITE_OPEN_TRANSIENT_DB;
assert( pOp->p1>=0 );
assert( pOp->p2>=0 );
- pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, 1);
+ pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, CURTYPE_BTREE);
if( pCx==0 ) goto no_mem;
pCx->nullRow = 1;
pCx->isEphemeral = 1;
- rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBt,
+ rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBtx,
BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5, vfsFlags);
if( rc==SQLITE_OK ){
- rc = sqlite3BtreeBeginTrans(pCx->pBt, 1);
+ rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1);
}
if( rc==SQLITE_OK ){
/* If a transient index is required, create it by calling
** opening it. If a transient table is required, just use the
** automatically created table with root-page 1 (an BLOB_INTKEY table).
*/
- if( (pKeyInfo = pOp->p4.pKeyInfo)!=0 ){
+ if( (pCx->pKeyInfo = pKeyInfo = pOp->p4.pKeyInfo)!=0 ){
int pgno;
assert( pOp->p4type==P4_KEYINFO );
- rc = sqlite3BtreeCreateTable(pCx->pBt, &pgno, BTREE_BLOBKEY | pOp->p5);
+ rc = sqlite3BtreeCreateTable(pCx->pBtx, &pgno, BTREE_BLOBKEY | pOp->p5);
if( rc==SQLITE_OK ){
assert( pgno==MASTER_ROOT+1 );
assert( pKeyInfo->db==db );
assert( pKeyInfo->enc==ENC(db) );
- pCx->pKeyInfo = pKeyInfo;
- rc = sqlite3BtreeCursor(pCx->pBt, pgno, 1, pKeyInfo, pCx->pCursor);
+ rc = sqlite3BtreeCursor(pCx->pBtx, pgno, BTREE_WRCSR,
+ pKeyInfo, pCx->uc.pCursor);
}
pCx->isTable = 0;
}else{
- rc = sqlite3BtreeCursor(pCx->pBt, MASTER_ROOT, 1, 0, pCx->pCursor);
+ rc = sqlite3BtreeCursor(pCx->pBtx, MASTER_ROOT, BTREE_WRCSR,
+ 0, pCx->uc.pCursor);
pCx->isTable = 1;
}
}
+ if( rc ) goto abort_due_to_error;
pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
break;
}
assert( pOp->p1>=0 );
assert( pOp->p2>=0 );
- pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, 1);
+ pCx = allocateCursor(p, pOp->p1, pOp->p2, -1, CURTYPE_SORTER);
if( pCx==0 ) goto no_mem;
pCx->pKeyInfo = pOp->p4.pKeyInfo;
assert( pCx->pKeyInfo->db==db );
assert( pCx->pKeyInfo->enc==ENC(db) );
rc = sqlite3VdbeSorterInit(db, pOp->p3, pCx);
+ if( rc ) goto abort_due_to_error;
break;
}
VdbeCursor *pC;
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
- assert( pC->pSorter );
+ assert( isSorter(pC) );
if( (pC->seqCount++)==0 ){
goto jump_to_p2;
}
assert( pOp->p1>=0 );
assert( pOp->p3>=0 );
- pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, 0);
+ pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, CURTYPE_PSEUDO);
if( pCx==0 ) goto no_mem;
pCx->nullRow = 1;
- pCx->pseudoTableReg = pOp->p2;
+ pCx->seekResult = pOp->p2;
pCx->isTable = 1;
+ /* Give this pseudo-cursor a fake BtCursor pointer so that pCx
+ ** can be safely passed to sqlite3VdbeCursorMoveto(). This avoids a test
+ ** for pCx->eCurType==CURTYPE_BTREE inside of sqlite3VdbeCursorMoveto()
+ ** which is a performance optimization */
+ pCx->uc.pCursor = sqlite3BtreeFakeValidCursor();
assert( pOp->p5==0 );
break;
}
case OP_ColumnsUsed: {
VdbeCursor *pC;
pC = p->apCsr[pOp->p1];
- assert( pC->pCursor );
+ assert( pC->eCurType==CURTYPE_BTREE );
pC->maskUsed = *(u64*)pOp->p4.pI64;
break;
}
** is greater than or equal to the key value. If there are no records
** greater than or equal to the key and P2 is not zero, then jump to P2.
**
+** If the cursor P1 was opened using the OPFLAG_SEEKEQ flag, then this
+** opcode will always land on a record that equally equals the key, or
+** else jump immediately to P2. When the cursor is OPFLAG_SEEKEQ, this
+** opcode must be followed by an IdxLE opcode with the same arguments.
+** The IdxLE opcode will be skipped if this opcode succeeds, but the
+** IdxLE opcode will be used on subsequent loop iterations.
+**
** This opcode leaves the cursor configured to move in forward order,
** from the beginning toward the end. In other words, the cursor is
** configured to use Next, not Prev.
** from the end toward the beginning. In other words, the cursor is
** configured to use Prev, not Next.
**
+** If the cursor P1 was opened using the OPFLAG_SEEKEQ flag, then this
+** opcode will always land on a record that equally equals the key, or
+** else jump immediately to P2. When the cursor is OPFLAG_SEEKEQ, this
+** opcode must be followed by an IdxGE opcode with the same arguments.
+** The IdxGE opcode will be skipped if this opcode succeeds, but the
+** IdxGE opcode will be used on subsequent loop iterations.
+**
** See also: Found, NotFound, SeekGt, SeekGe, SeekLt
*/
case OP_SeekLT: /* jump, in3 */
case OP_SeekLE: /* jump, in3 */
case OP_SeekGE: /* jump, in3 */
case OP_SeekGT: { /* jump, in3 */
- int res;
- int oc;
- VdbeCursor *pC;
- UnpackedRecord r;
- int nField;
- i64 iKey; /* The rowid we are to seek to */
+ int res; /* Comparison result */
+ int oc; /* Opcode */
+ VdbeCursor *pC; /* The cursor to seek */
+ UnpackedRecord r; /* The key to seek for */
+ int nField; /* Number of columns or fields in the key */
+ i64 iKey; /* The rowid we are to seek to */
+ int eqOnly; /* Only interested in == results */
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
assert( pOp->p2!=0 );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- assert( pC->pseudoTableReg==0 );
+ assert( pC->eCurType==CURTYPE_BTREE );
assert( OP_SeekLE == OP_SeekLT+1 );
assert( OP_SeekGE == OP_SeekLT+2 );
assert( OP_SeekGT == OP_SeekLT+3 );
assert( pC->isOrdered );
- assert( pC->pCursor!=0 );
+ assert( pC->uc.pCursor!=0 );
oc = pOp->opcode;
+ eqOnly = 0;
pC->nullRow = 0;
#ifdef SQLITE_DEBUG
pC->seekOp = pOp->opcode;
#endif
- /* For a cursor with the BTREE_SEEK_EQ hint, only the OP_SeekGE and
- ** OP_SeekLE opcodes are allowed, and these must be immediately followed
- ** by an OP_IdxGT or OP_IdxLT opcode, respectively, with the same key.
- */
-#ifdef SQLITE_DEBUG
- if( sqlite3BtreeCursorHasHint(pC->pCursor, BTREE_SEEK_EQ) ){
- assert( pOp->opcode==OP_SeekGE || pOp->opcode==OP_SeekLE );
- assert( pOp[1].opcode==OP_IdxLT || pOp[1].opcode==OP_IdxGT );
- assert( pOp[1].p1==pOp[0].p1 );
- assert( pOp[1].p2==pOp[0].p2 );
- assert( pOp[1].p3==pOp[0].p3 );
- assert( pOp[1].p4.i==pOp[0].p4.i );
- }
-#endif
-
if( pC->isTable ){
+ /* The BTREE_SEEK_EQ flag is only set on index cursors */
+ assert( sqlite3BtreeCursorHasHint(pC->uc.pCursor, BTREE_SEEK_EQ)==0
+ || CORRUPT_DB );
+
/* The input value in P3 might be of any type: integer, real, string,
** blob, or NULL. But it needs to be an integer before we can do
** the seek, so convert it. */
if( (oc & 0x0001)==(OP_SeekLT & 0x0001) ) oc++;
}
}
- rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)iKey, 0, &res);
+ rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, 0, (u64)iKey, 0, &res);
pC->movetoTarget = iKey; /* Used by OP_Delete */
if( rc!=SQLITE_OK ){
goto abort_due_to_error;
}
}else{
+ /* For a cursor with the BTREE_SEEK_EQ hint, only the OP_SeekGE and
+ ** OP_SeekLE opcodes are allowed, and these must be immediately followed
+ ** by an OP_IdxGT or OP_IdxLT opcode, respectively, with the same key.
+ */
+ if( sqlite3BtreeCursorHasHint(pC->uc.pCursor, BTREE_SEEK_EQ) ){
+ eqOnly = 1;
+ assert( pOp->opcode==OP_SeekGE || pOp->opcode==OP_SeekLE );
+ assert( pOp[1].opcode==OP_IdxLT || pOp[1].opcode==OP_IdxGT );
+ assert( pOp[1].p1==pOp[0].p1 );
+ assert( pOp[1].p2==pOp[0].p2 );
+ assert( pOp[1].p3==pOp[0].p3 );
+ assert( pOp[1].p4.i==pOp[0].p4.i );
+ }
+
nField = pOp->p4.i;
assert( pOp->p4type==P4_INT32 );
assert( nField>0 );
#ifdef SQLITE_DEBUG
{ int i; for(i=0; i<r.nField; i++) assert( memIsValid(&r.aMem[i]) ); }
#endif
- ExpandBlob(r.aMem);
- rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, &r, 0, 0, &res);
+ r.eqSeen = 0;
+ rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, &r, 0, 0, &res);
if( rc!=SQLITE_OK ){
goto abort_due_to_error;
}
+ if( eqOnly && r.eqSeen==0 ){
+ assert( res!=0 );
+ goto seek_not_found;
+ }
}
pC->deferredMoveto = 0;
pC->cacheStatus = CACHE_STALE;
if( oc>=OP_SeekGE ){ assert( oc==OP_SeekGE || oc==OP_SeekGT );
if( res<0 || (res==0 && oc==OP_SeekGT) ){
res = 0;
- rc = sqlite3BtreeNext(pC->pCursor, &res);
- if( rc!=SQLITE_OK ) goto abort_due_to_error;
+ rc = sqlite3BtreeNext(pC->uc.pCursor, 0);
+ if( rc!=SQLITE_OK ){
+ if( rc==SQLITE_DONE ){
+ rc = SQLITE_OK;
+ res = 1;
+ }else{
+ goto abort_due_to_error;
+ }
+ }
}else{
res = 0;
}
assert( oc==OP_SeekLT || oc==OP_SeekLE );
if( res>0 || (res==0 && oc==OP_SeekLT) ){
res = 0;
- rc = sqlite3BtreePrevious(pC->pCursor, &res);
- if( rc!=SQLITE_OK ) goto abort_due_to_error;
+ rc = sqlite3BtreePrevious(pC->uc.pCursor, 0);
+ if( rc!=SQLITE_OK ){
+ if( rc==SQLITE_DONE ){
+ rc = SQLITE_OK;
+ res = 1;
+ }else{
+ goto abort_due_to_error;
+ }
+ }
}else{
/* res might be negative because the table is empty. Check to
** see if this is the case.
*/
- res = sqlite3BtreeEof(pC->pCursor);
+ res = sqlite3BtreeEof(pC->uc.pCursor);
}
}
+seek_not_found:
assert( pOp->p2>0 );
VdbeBranchTaken(res!=0,2);
if( res ){
goto jump_to_p2;
+ }else if( eqOnly ){
+ assert( pOp[1].opcode==OP_IdxLT || pOp[1].opcode==OP_IdxGT );
+ pOp++; /* Skip the OP_IdxLt or OP_IdxGT that follows */
}
break;
}
-/* Opcode: Seek P1 P2 * * *
-** Synopsis: intkey=r[P2]
-**
-** P1 is an open table cursor and P2 is a rowid integer. Arrange
-** for P1 to move so that it points to the rowid given by P2.
-**
-** This is actually a deferred seek. Nothing actually happens until
-** the cursor is used to read a record. That way, if no reads
-** occur, no unnecessary I/O happens.
-*/
-case OP_Seek: { /* in2 */
- VdbeCursor *pC;
-
- assert( pOp->p1>=0 && pOp->p1<p->nCursor );
- pC = p->apCsr[pOp->p1];
- assert( pC!=0 );
- assert( pC->pCursor!=0 );
- assert( pC->isTable );
- pC->nullRow = 0;
- pIn2 = &aMem[pOp->p2];
- pC->movetoTarget = sqlite3VdbeIntValue(pIn2);
- pC->deferredMoveto = 1;
- break;
-}
-
-
/* Opcode: Found P1 P2 P3 P4 *
** Synopsis: key=r[P3@P4]
**
int ii;
VdbeCursor *pC;
int res;
- char *pFree;
+ UnpackedRecord *pFree;
UnpackedRecord *pIdxKey;
UnpackedRecord r;
- char aTempRec[ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*4 + 7];
#ifdef SQLITE_TEST
if( pOp->opcode!=OP_NoConflict ) sqlite3_found_count++;
pC->seekOp = pOp->opcode;
#endif
pIn3 = &aMem[pOp->p3];
- assert( pC->pCursor!=0 );
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
assert( pC->isTable==0 );
- pFree = 0;
if( pOp->p4.i>0 ){
r.pKeyInfo = pC->pKeyInfo;
r.nField = (u16)pOp->p4.i;
r.aMem = pIn3;
+#ifdef SQLITE_DEBUG
for(ii=0; ii<r.nField; ii++){
assert( memIsValid(&r.aMem[ii]) );
- ExpandBlob(&r.aMem[ii]);
-#ifdef SQLITE_DEBUG
+ assert( (r.aMem[ii].flags & MEM_Zero)==0 || r.aMem[ii].n==0 );
if( ii ) REGISTER_TRACE(pOp->p3+ii, &r.aMem[ii]);
-#endif
}
+#endif
pIdxKey = &r;
+ pFree = 0;
}else{
- pIdxKey = sqlite3VdbeAllocUnpackedRecord(
- pC->pKeyInfo, aTempRec, sizeof(aTempRec), &pFree
- );
- if( pIdxKey==0 ) goto no_mem;
assert( pIn3->flags & MEM_Blob );
- ExpandBlob(pIn3);
+ rc = ExpandBlob(pIn3);
+ assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
+ if( rc ) goto no_mem;
+ pFree = pIdxKey = sqlite3VdbeAllocUnpackedRecord(pC->pKeyInfo);
+ if( pIdxKey==0 ) goto no_mem;
sqlite3VdbeRecordUnpack(pC->pKeyInfo, pIn3->n, pIn3->z, pIdxKey);
}
pIdxKey->default_rc = 0;
}
}
}
- rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, pIdxKey, 0, 0, &res);
- sqlite3DbFree(db, pFree);
+ rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, pIdxKey, 0, 0, &res);
+ if( pFree ) sqlite3DbFreeNN(db, pFree);
if( rc!=SQLITE_OK ){
- break;
+ goto abort_due_to_error;
}
pC->seekResult = res;
alreadyExists = (res==0);
break;
}
+/* Opcode: SeekRowid P1 P2 P3 * *
+** Synopsis: intkey=r[P3]
+**
+** P1 is the index of a cursor open on an SQL table btree (with integer
+** keys). If register P3 does not contain an integer or if P1 does not
+** contain a record with rowid P3 then jump immediately to P2.
+** Or, if P2 is 0, raise an SQLITE_CORRUPT error. If P1 does contain
+** a record with rowid P3 then
+** leave the cursor pointing at that record and fall through to the next
+** instruction.
+**
+** The OP_NotExists opcode performs the same operation, but with OP_NotExists
+** the P3 register must be guaranteed to contain an integer value. With this
+** opcode, register P3 might not contain an integer.
+**
+** The OP_NotFound opcode performs the same operation on index btrees
+** (with arbitrary multi-value keys).
+**
+** This opcode leaves the cursor in a state where it cannot be advanced
+** in either direction. In other words, the Next and Prev opcodes will
+** not work following this opcode.
+**
+** See also: Found, NotFound, NoConflict, SeekRowid
+*/
/* Opcode: NotExists P1 P2 P3 * *
** Synopsis: intkey=r[P3]
**
** leave the cursor pointing at that record and fall through to the next
** instruction.
**
+** The OP_SeekRowid opcode performs the same operation but also allows the
+** P3 register to contain a non-integer value, in which case the jump is
+** always taken. This opcode requires that P3 always contain an integer.
+**
** The OP_NotFound opcode performs the same operation on index btrees
** (with arbitrary multi-value keys).
**
** in either direction. In other words, the Next and Prev opcodes will
** not work following this opcode.
**
-** See also: Found, NotFound, NoConflict
+** See also: Found, NotFound, NoConflict, SeekRowid
*/
-case OP_NotExists: { /* jump, in3 */
+case OP_SeekRowid: { /* jump, in3 */
VdbeCursor *pC;
BtCursor *pCrsr;
int res;
u64 iKey;
+ pIn3 = &aMem[pOp->p3];
+ if( (pIn3->flags & MEM_Int)==0 ){
+ applyAffinity(pIn3, SQLITE_AFF_NUMERIC, encoding);
+ if( (pIn3->flags & MEM_Int)==0 ) goto jump_to_p2;
+ }
+ /* Fall through into OP_NotExists */
+case OP_NotExists: /* jump, in3 */
pIn3 = &aMem[pOp->p3];
assert( pIn3->flags & MEM_Int );
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC->seekOp = 0;
#endif
assert( pC->isTable );
- assert( pC->pseudoTableReg==0 );
- pCrsr = pC->pCursor;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ pCrsr = pC->uc.pCursor;
assert( pCrsr!=0 );
res = 0;
iKey = pIn3->u.i;
goto jump_to_p2;
}
}
+ if( rc ) goto abort_due_to_error;
break;
}
case OP_Sequence: { /* out2 */
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
assert( p->apCsr[pOp->p1]!=0 );
+ assert( p->apCsr[pOp->p1]->eCurType!=CURTYPE_VTAB );
pOut = out2Prerelease(p, pOp);
pOut->u.i = p->apCsr[pOp->p1]->seqCount++;
break;
pOut = out2Prerelease(p, pOp);
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
+ if( !pC->isTable ){
+ rc = SQLITE_CORRUPT_BKPT;
+ goto abort_due_to_error;
+ }
assert( pC!=0 );
- assert( pC->pCursor!=0 );
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
{
/* The next rowid or record number (different terms for the same
** thing) is obtained in a two-step algorithm.
#endif
if( !pC->useRandomRowid ){
- rc = sqlite3BtreeLast(pC->pCursor, &res);
+ rc = sqlite3BtreeLast(pC->uc.pCursor, &res);
if( rc!=SQLITE_OK ){
goto abort_due_to_error;
}
if( res ){
v = 1; /* IMP: R-61914-48074 */
}else{
- assert( sqlite3BtreeCursorIsValid(pC->pCursor) );
- rc = sqlite3BtreeKeySize(pC->pCursor, &v);
- assert( rc==SQLITE_OK ); /* Cannot fail following BtreeLast() */
+ assert( sqlite3BtreeCursorIsValid(pC->uc.pCursor) );
+ v = sqlite3BtreeIntegerKey(pC->uc.pCursor);
if( v>=MAX_ROWID ){
pC->useRandomRowid = 1;
}else{
pMem = &pFrame->aMem[pOp->p3];
}else{
/* Assert that P3 is a valid memory cell. */
- assert( pOp->p3<=(p->nMem-p->nCursor) );
+ assert( pOp->p3<=(p->nMem+1 - p->nCursor) );
pMem = &aMem[pOp->p3];
memAboutToChange(p, pMem);
}
sqlite3VdbeMemIntegerify(pMem);
assert( (pMem->flags & MEM_Int)!=0 ); /* mem(P3) holds an integer */
if( pMem->u.i==MAX_ROWID || pC->useRandomRowid ){
- rc = SQLITE_FULL; /* IMP: R-12275-61338 */
+ rc = SQLITE_FULL; /* IMP: R-17817-00630 */
goto abort_due_to_error;
}
if( v<pMem->u.i+1 ){
do{
sqlite3_randomness(sizeof(v), &v);
v &= (MAX_ROWID>>1); v++; /* Ensure that v is greater than zero */
- }while( ((rc = sqlite3BtreeMovetoUnpacked(pC->pCursor, 0, (u64)v,
+ }while( ((rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, 0, (u64)v,
0, &res))==SQLITE_OK)
&& (res==0)
&& (++cnt<100));
- if( rc==SQLITE_OK && res==0 ){
+ if( rc ) goto abort_due_to_error;
+ if( res==0 ){
rc = SQLITE_FULL; /* IMP: R-38219-53002 */
goto abort_due_to_error;
}
** then rowid is stored for subsequent return by the
** sqlite3_last_insert_rowid() function (otherwise it is unmodified).
**
-** If the OPFLAG_USESEEKRESULT flag of P5 is set and if the result of
-** the last seek operation (OP_NotExists) was a success, then this
-** operation will not attempt to find the appropriate row before doing
-** the insert but will instead overwrite the row that the cursor is
-** currently pointing to. Presumably, the prior OP_NotExists opcode
-** has already positioned the cursor correctly. This is an optimization
-** that boosts performance by avoiding redundant seeks.
+** If the OPFLAG_USESEEKRESULT flag of P5 is set, the implementation might
+** run faster by avoiding an unnecessary seek on cursor P1. However,
+** the OPFLAG_USESEEKRESULT flag must only be set if there have been no prior
+** seeks on the cursor or if the most recent seek used a key equal to P3.
**
** If the OPFLAG_ISUPDATE flag is set, then this opcode is part of an
** UPDATE operation. Otherwise (if the flag is clear) then this opcode
** is part of an INSERT operation. The difference is only important to
** the update hook.
**
-** Parameter P4 may point to a string containing the table-name, or
-** may be NULL. If it is not NULL, then the update-hook
-** (sqlite3.xUpdateCallback) is invoked following a successful insert.
+** Parameter P4 may point to a Table structure, or may be NULL. If it is
+** not NULL, then the update-hook (sqlite3.xUpdateCallback) is invoked
+** following a successful insert.
**
** (WARNING/TODO: If P1 is a pseudo-cursor and P2 is dynamically
** allocated, then ownership of P2 is transferred to the pseudo-cursor
** for indices is OP_IdxInsert.
*/
/* Opcode: InsertInt P1 P2 P3 P4 P5
-** Synopsis: intkey=P3 data=r[P2]
+** Synopsis: intkey=P3 data=r[P2]
**
** This works exactly like OP_Insert except that the key is the
** integer value P3, not the value of the integer stored in register P3.
case OP_InsertInt: {
Mem *pData; /* MEM cell holding data for the record to be inserted */
Mem *pKey; /* MEM cell holding key for the record */
- i64 iKey; /* The integer ROWID or key for the record to be inserted */
VdbeCursor *pC; /* Cursor to table into which insert is written */
- int nZero; /* Number of zero-bytes to append */
int seekResult; /* Result of prior seek or 0 if no USESEEKRESULT flag */
const char *zDb; /* database name - used by the update hook */
- const char *zTbl; /* Table name - used by the opdate hook */
- int op; /* Opcode for update hook: SQLITE_UPDATE or SQLITE_INSERT */
+ Table *pTab; /* Table structure - used by update and pre-update hooks */
+ BtreePayload x; /* Payload to be inserted */
pData = &aMem[pOp->p2];
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
assert( memIsValid(pData) );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- assert( pC->pCursor!=0 );
- assert( pC->pseudoTableReg==0 );
- assert( pC->isTable );
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
+ assert( (pOp->p5 & OPFLAG_ISNOOP) || pC->isTable );
+ assert( pOp->p4type==P4_TABLE || pOp->p4type>=P4_STATIC );
REGISTER_TRACE(pOp->p2, pData);
if( pOp->opcode==OP_Insert ){
assert( pKey->flags & MEM_Int );
assert( memIsValid(pKey) );
REGISTER_TRACE(pOp->p3, pKey);
- iKey = pKey->u.i;
+ x.nKey = pKey->u.i;
}else{
assert( pOp->opcode==OP_InsertInt );
- iKey = pOp->p3;
+ x.nKey = pOp->p3;
}
- if( pOp->p5 & OPFLAG_NCHANGE ) p->nChange++;
- if( pOp->p5 & OPFLAG_LASTROWID ) db->lastRowid = lastRowid = iKey;
- if( pData->flags & MEM_Null ){
- pData->z = 0;
- pData->n = 0;
+ if( pOp->p4type==P4_TABLE && HAS_UPDATE_HOOK(db) ){
+ assert( pC->iDb>=0 );
+ zDb = db->aDb[pC->iDb].zDbSName;
+ pTab = pOp->p4.pTab;
+ assert( (pOp->p5 & OPFLAG_ISNOOP) || HasRowid(pTab) );
}else{
- assert( pData->flags & (MEM_Blob|MEM_Str) );
+ pTab = 0;
+ zDb = 0; /* Not needed. Silence a compiler warning. */
}
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ /* Invoke the pre-update hook, if any */
+ if( pTab ){
+ if( db->xPreUpdateCallback && !(pOp->p5 & OPFLAG_ISUPDATE) ){
+ sqlite3VdbePreUpdateHook(p, pC, SQLITE_INSERT, zDb, pTab, x.nKey,pOp->p2);
+ }
+ if( db->xUpdateCallback==0 || pTab->aCol==0 ){
+ /* Prevent post-update hook from running in cases when it should not */
+ pTab = 0;
+ }
+ }
+ if( pOp->p5 & OPFLAG_ISNOOP ) break;
+#endif
+
+ if( pOp->p5 & OPFLAG_NCHANGE ) p->nChange++;
+ if( pOp->p5 & OPFLAG_LASTROWID ) db->lastRowid = x.nKey;
+ assert( pData->flags & (MEM_Blob|MEM_Str) );
+ x.pData = pData->z;
+ x.nData = pData->n;
seekResult = ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0);
if( pData->flags & MEM_Zero ){
- nZero = pData->u.nZero;
+ x.nZero = pData->u.nZero;
}else{
- nZero = 0;
+ x.nZero = 0;
}
- rc = sqlite3BtreeInsert(pC->pCursor, 0, iKey,
- pData->z, pData->n, nZero,
- (pOp->p5 & OPFLAG_APPEND)!=0, seekResult
+ x.pKey = 0;
+ rc = sqlite3BtreeInsert(pC->uc.pCursor, &x,
+ (pOp->p5 & (OPFLAG_APPEND|OPFLAG_SAVEPOSITION)), seekResult
);
pC->deferredMoveto = 0;
pC->cacheStatus = CACHE_STALE;
/* Invoke the update-hook if required. */
- if( rc==SQLITE_OK && db->xUpdateCallback && pOp->p4.z ){
- zDb = db->aDb[pC->iDb].zName;
- zTbl = pOp->p4.z;
- op = ((pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT);
- assert( pC->isTable );
- db->xUpdateCallback(db->pUpdateArg, op, zDb, zTbl, iKey);
- assert( pC->iDb>=0 );
+ if( rc ) goto abort_due_to_error;
+ if( pTab ){
+ assert( db->xUpdateCallback!=0 );
+ assert( pTab->aCol!=0 );
+ db->xUpdateCallback(db->pUpdateArg,
+ (pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT,
+ zDb, pTab->zName, x.nKey);
}
break;
}
-/* Opcode: Delete P1 P2 * P4 P5
+/* Opcode: Delete P1 P2 P3 P4 P5
**
** Delete the record at which the P1 cursor is currently pointing.
**
-** If the P5 parameter is non-zero, the cursor will be left pointing at
-** either the next or the previous record in the table. If it is left
-** pointing at the next record, then the next Next instruction will be a
-** no-op. As a result, in this case it is OK to delete a record from within a
-** Next loop. If P5 is zero, then the cursor is left in an undefined state.
+** If the OPFLAG_SAVEPOSITION bit of the P5 parameter is set, then
+** the cursor will be left pointing at either the next or the previous
+** record in the table. If it is left pointing at the next record, then
+** the next Next instruction will be a no-op. As a result, in this case
+** it is ok to delete a record from within a Next loop. If
+** OPFLAG_SAVEPOSITION bit of P5 is clear, then the cursor will be
+** left in an undefined state.
+**
+** If the OPFLAG_AUXDELETE bit is set on P5, that indicates that this
+** delete one of several associated with deleting a table row and all its
+** associated index entries. Exactly one of those deletes is the "primary"
+** delete. The others are all on OPFLAG_FORDELETE cursors or else are
+** marked with the AUXDELETE flag.
**
-** If the OPFLAG_NCHANGE flag of P2 is set, then the row change count is
-** incremented (otherwise not).
+** If the OPFLAG_NCHANGE flag of P2 (NB: P2 not P5) is set, then the row
+** change count is incremented (otherwise not).
**
** P1 must not be pseudo-table. It has to be a real table with
** multiple rows.
**
-** If P4 is not NULL, then it is the name of the table that P1 is
-** pointing to. The update hook will be invoked, if it exists.
-** If P4 is not NULL then the P1 cursor must have been positioned
-** using OP_NotFound prior to invoking this opcode.
+** If P4 is not NULL then it points to a Table object. In this case either
+** the update or pre-update hook, or both, may be invoked. The P1 cursor must
+** have been positioned using OP_NotFound prior to invoking this opcode in
+** this case. Specifically, if one is configured, the pre-update hook is
+** invoked if P4 is not NULL. The update-hook is invoked if one is configured,
+** P4 is not NULL, and the OPFLAG_NCHANGE flag is set in P2.
+**
+** If the OPFLAG_ISUPDATE flag is set in P2, then P3 contains the address
+** of the memory cell that contains the value that the rowid of the row will
+** be set to by the update.
*/
case OP_Delete: {
VdbeCursor *pC;
- u8 hasUpdateCallback;
+ const char *zDb;
+ Table *pTab;
+ int opflags;
+ opflags = pOp->p2;
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- assert( pC->pCursor!=0 ); /* Only valid for real tables, no pseudotables */
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
assert( pC->deferredMoveto==0 );
- hasUpdateCallback = db->xUpdateCallback && pOp->p4.z && pC->isTable;
- if( pOp->p5 && hasUpdateCallback ){
- sqlite3BtreeKeySize(pC->pCursor, &pC->movetoTarget);
+#ifdef SQLITE_DEBUG
+ if( pOp->p4type==P4_TABLE && HasRowid(pOp->p4.pTab) && pOp->p5==0 ){
+ /* If p5 is zero, the seek operation that positioned the cursor prior to
+ ** OP_Delete will have also set the pC->movetoTarget field to the rowid of
+ ** the row that is being deleted */
+ i64 iKey = sqlite3BtreeIntegerKey(pC->uc.pCursor);
+ assert( pC->movetoTarget==iKey );
}
+#endif
-#ifdef SQLITE_DEBUG
- /* The seek operation that positioned the cursor prior to OP_Delete will
- ** have also set the pC->movetoTarget field to the rowid of the row that
- ** is being deleted */
- if( pOp->p4.z && pC->isTable && pOp->p5==0 ){
- i64 iKey = 0;
- sqlite3BtreeKeySize(pC->pCursor, &iKey);
- assert( pC->movetoTarget==iKey );
+ /* If the update-hook or pre-update-hook will be invoked, set zDb to
+ ** the name of the db to pass as to it. Also set local pTab to a copy
+ ** of p4.pTab. Finally, if p5 is true, indicating that this cursor was
+ ** last moved with OP_Next or OP_Prev, not Seek or NotFound, set
+ ** VdbeCursor.movetoTarget to the current rowid. */
+ if( pOp->p4type==P4_TABLE && HAS_UPDATE_HOOK(db) ){
+ assert( pC->iDb>=0 );
+ assert( pOp->p4.pTab!=0 );
+ zDb = db->aDb[pC->iDb].zDbSName;
+ pTab = pOp->p4.pTab;
+ if( (pOp->p5 & OPFLAG_SAVEPOSITION)!=0 && pC->isTable ){
+ pC->movetoTarget = sqlite3BtreeIntegerKey(pC->uc.pCursor);
+ }
+ }else{
+ zDb = 0; /* Not needed. Silence a compiler warning. */
+ pTab = 0; /* Not needed. Silence a compiler warning. */
+ }
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ /* Invoke the pre-update-hook if required. */
+ if( db->xPreUpdateCallback && pOp->p4.pTab ){
+ assert( !(opflags & OPFLAG_ISUPDATE)
+ || HasRowid(pTab)==0
+ || (aMem[pOp->p3].flags & MEM_Int)
+ );
+ sqlite3VdbePreUpdateHook(p, pC,
+ (opflags & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_DELETE,
+ zDb, pTab, pC->movetoTarget,
+ pOp->p3
+ );
}
+ if( opflags & OPFLAG_ISNOOP ) break;
#endif
- rc = sqlite3BtreeDelete(pC->pCursor, pOp->p5);
+ /* Only flags that can be set are SAVEPOISTION and AUXDELETE */
+ assert( (pOp->p5 & ~(OPFLAG_SAVEPOSITION|OPFLAG_AUXDELETE))==0 );
+ assert( OPFLAG_SAVEPOSITION==BTREE_SAVEPOSITION );
+ assert( OPFLAG_AUXDELETE==BTREE_AUXDELETE );
+
+#ifdef SQLITE_DEBUG
+ if( p->pFrame==0 ){
+ if( pC->isEphemeral==0
+ && (pOp->p5 & OPFLAG_AUXDELETE)==0
+ && (pC->wrFlag & OPFLAG_FORDELETE)==0
+ ){
+ nExtraDelete++;
+ }
+ if( pOp->p2 & OPFLAG_NCHANGE ){
+ nExtraDelete--;
+ }
+ }
+#endif
+
+ rc = sqlite3BtreeDelete(pC->uc.pCursor, pOp->p5);
pC->cacheStatus = CACHE_STALE;
+ pC->seekResult = 0;
+ if( rc ) goto abort_due_to_error;
/* Invoke the update-hook if required. */
- if( rc==SQLITE_OK && hasUpdateCallback ){
- db->xUpdateCallback(db->pUpdateArg, SQLITE_DELETE,
- db->aDb[pC->iDb].zName, pOp->p4.z, pC->movetoTarget);
- assert( pC->iDb>=0 );
+ if( opflags & OPFLAG_NCHANGE ){
+ p->nChange++;
+ if( db->xUpdateCallback && HasRowid(pTab) ){
+ db->xUpdateCallback(db->pUpdateArg, SQLITE_DELETE, zDb, pTab->zName,
+ pC->movetoTarget);
+ assert( pC->iDb>=0 );
+ }
}
- if( pOp->p2 & OPFLAG_NCHANGE ) p->nChange++;
+
break;
}
/* Opcode: ResetCount * * * * *
}
/* Opcode: SorterCompare P1 P2 P3 P4
-** Synopsis: if key(P1)!=trim(r[P3],P4) goto P2
+** Synopsis: if key(P1)!=trim(r[P3],P4) goto P2
**
** P1 is a sorter cursor. This instruction compares a prefix of the
** record blob in register P3 against a prefix of the entry that
res = 0;
rc = sqlite3VdbeSorterCompare(pC, pIn3, nKeyCol, &res);
VdbeBranchTaken(res!=0,2);
+ if( rc ) goto abort_due_to_error;
if( res ) goto jump_to_p2;
break;
};
rc = sqlite3VdbeSorterRowkey(pC, pOut);
assert( rc!=SQLITE_OK || (pOut->flags & MEM_Blob) );
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+ if( rc ) goto abort_due_to_error;
p->apCsr[pOp->p3]->cacheStatus = CACHE_STALE;
break;
}
-/* Opcode: RowData P1 P2 * * *
+/* Opcode: RowData P1 P2 P3 * *
** Synopsis: r[P2]=data
**
-** Write into register P2 the complete row data for cursor P1.
+** Write into register P2 the complete row content for the row at
+** which cursor P1 is currently pointing.
** There is no interpretation of the data.
** It is just copied onto the P2 register exactly as
** it is found in the database file.
**
+** If cursor P1 is an index, then the content is the key of the row.
+** If cursor P2 is a table, then the content extracted is the data.
+**
** If the P1 cursor must be pointing to a valid row (not a NULL row)
** of a real table, not a pseudo-table.
-*/
-/* Opcode: RowKey P1 P2 * * *
-** Synopsis: r[P2]=key
**
-** Write into register P2 the complete row key for cursor P1.
-** There is no interpretation of the data.
-** The key is copied onto the P2 register exactly as
-** it is found in the database file.
+** If P3!=0 then this opcode is allowed to make an ephermeral pointer
+** into the database page. That means that the content of the output
+** register will be invalidated as soon as the cursor moves - including
+** moves caused by other cursors that "save" the the current cursors
+** position in order that they can write to the same table. If P3==0
+** then a copy of the data is made into memory. P3!=0 is faster, but
+** P3==0 is safer.
**
-** If the P1 cursor must be pointing to a valid row (not a NULL row)
-** of a real table, not a pseudo-table.
+** If P3!=0 then the content of the P2 register is unsuitable for use
+** in OP_Result and any OP_Result will invalidate the P2 register content.
+** The P2 register content is invalidated by opcodes like OP_Function or
+** by any use of another cursor pointing to the same table.
*/
-case OP_RowKey:
case OP_RowData: {
VdbeCursor *pC;
BtCursor *pCrsr;
u32 n;
- i64 n64;
- pOut = &aMem[pOp->p2];
- memAboutToChange(p, pOut);
+ pOut = out2Prerelease(p, pOp);
- /* Note that RowKey and RowData are really exactly the same instruction */
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
- assert( isSorter(pC)==0 );
- assert( pC->isTable || pOp->opcode!=OP_RowData );
- assert( pC->isTable==0 || pOp->opcode==OP_RowData );
assert( pC!=0 );
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( isSorter(pC)==0 );
assert( pC->nullRow==0 );
- assert( pC->pseudoTableReg==0 );
- assert( pC->pCursor!=0 );
- pCrsr = pC->pCursor;
+ assert( pC->uc.pCursor!=0 );
+ pCrsr = pC->uc.pCursor;
- /* The OP_RowKey and OP_RowData opcodes always follow OP_NotExists or
- ** OP_Rewind/Op_Next with no intervening instructions that might invalidate
- ** the cursor. If this where not the case, on of the following assert()s
+ /* The OP_RowData opcodes always follow OP_NotExists or
+ ** OP_SeekRowid or OP_Rewind/Op_Next with no intervening instructions
+ ** that might invalidate the cursor.
+ ** If this where not the case, on of the following assert()s
** would fail. Should this ever change (because of changes in the code
** generator) then the fix would be to insert a call to
** sqlite3VdbeCursorMoveto().
if( rc!=SQLITE_OK ) goto abort_due_to_error;
#endif
- if( pC->isTable==0 ){
- assert( !pC->isTable );
- VVA_ONLY(rc =) sqlite3BtreeKeySize(pCrsr, &n64);
- assert( rc==SQLITE_OK ); /* True because of CursorMoveto() call above */
- if( n64>db->aLimit[SQLITE_LIMIT_LENGTH] ){
- goto too_big;
- }
- n = (u32)n64;
- }else{
- VVA_ONLY(rc =) sqlite3BtreeDataSize(pCrsr, &n);
- assert( rc==SQLITE_OK ); /* DataSize() cannot fail */
- if( n>(u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){
- goto too_big;
- }
+ n = sqlite3BtreePayloadSize(pCrsr);
+ if( n>(u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){
+ goto too_big;
}
testcase( n==0 );
- if( sqlite3VdbeMemClearAndResize(pOut, MAX(n,32)) ){
- goto no_mem;
- }
- pOut->n = n;
- MemSetTypeFlag(pOut, MEM_Blob);
- if( pC->isTable==0 ){
- rc = sqlite3BtreeKey(pCrsr, 0, n, pOut->z);
- }else{
- rc = sqlite3BtreeData(pCrsr, 0, n, pOut->z);
- }
- pOut->enc = SQLITE_UTF8; /* In case the blob is ever cast to text */
+ rc = sqlite3VdbeMemFromBtree(pCrsr, 0, n, pOut);
+ if( rc ) goto abort_due_to_error;
+ if( !pOp->p3 ) Deephemeralize(pOut);
UPDATE_MAX_BLOBSIZE(pOut);
REGISTER_TRACE(pOp->p2, pOut);
break;
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- assert( pC->pseudoTableReg==0 || pC->nullRow );
+ assert( pC->eCurType!=CURTYPE_PSEUDO || pC->nullRow );
if( pC->nullRow ){
pOut->flags = MEM_Null;
break;
}else if( pC->deferredMoveto ){
v = pC->movetoTarget;
#ifndef SQLITE_OMIT_VIRTUALTABLE
- }else if( pC->pVtabCursor ){
- pVtab = pC->pVtabCursor->pVtab;
+ }else if( pC->eCurType==CURTYPE_VTAB ){
+ assert( pC->uc.pVCur!=0 );
+ pVtab = pC->uc.pVCur->pVtab;
pModule = pVtab->pModule;
assert( pModule->xRowid );
- rc = pModule->xRowid(pC->pVtabCursor, &v);
+ rc = pModule->xRowid(pC->uc.pVCur, &v);
sqlite3VtabImportErrmsg(p, pVtab);
+ if( rc ) goto abort_due_to_error;
#endif /* SQLITE_OMIT_VIRTUALTABLE */
}else{
- assert( pC->pCursor!=0 );
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
rc = sqlite3VdbeCursorRestore(pC);
if( rc ) goto abort_due_to_error;
if( pC->nullRow ){
pOut->flags = MEM_Null;
break;
}
- rc = sqlite3BtreeKeySize(pC->pCursor, &v);
- assert( rc==SQLITE_OK ); /* Always so because of CursorRestore() above */
+ v = sqlite3BtreeIntegerKey(pC->uc.pCursor);
}
pOut->u.i = v;
break;
assert( pC!=0 );
pC->nullRow = 1;
pC->cacheStatus = CACHE_STALE;
- if( pC->pCursor ){
- sqlite3BtreeClearCursor(pC->pCursor);
+ if( pC->eCurType==CURTYPE_BTREE ){
+ assert( pC->uc.pCursor!=0 );
+ sqlite3BtreeClearCursor(pC->uc.pCursor);
}
break;
}
-/* Opcode: Last P1 P2 P3 * *
+/* Opcode: SeekEnd P1 * * * *
+**
+** Position cursor P1 at the end of the btree for the purpose of
+** appending a new entry onto the btree.
+**
+** It is assumed that the cursor is used only for appending and so
+** if the cursor is valid, then the cursor must already be pointing
+** at the end of the btree and so no changes are made to
+** the cursor.
+*/
+/* Opcode: Last P1 P2 * * *
**
** The next use of the Rowid or Column or Prev instruction for P1
** will refer to the last entry in the database table or index.
** from the end toward the beginning. In other words, the cursor is
** configured to use Prev, not Next.
*/
+case OP_SeekEnd:
case OP_Last: { /* jump */
VdbeCursor *pC;
BtCursor *pCrsr;
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- pCrsr = pC->pCursor;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ pCrsr = pC->uc.pCursor;
res = 0;
assert( pCrsr!=0 );
+#ifdef SQLITE_DEBUG
+ pC->seekOp = pOp->opcode;
+#endif
+ if( pOp->opcode==OP_SeekEnd ){
+ assert( pOp->p2==0 );
+ pC->seekResult = -1;
+ if( sqlite3BtreeCursorIsValidNN(pCrsr) ){
+ break;
+ }
+ }
rc = sqlite3BtreeLast(pCrsr, &res);
pC->nullRow = (u8)res;
pC->deferredMoveto = 0;
pC->cacheStatus = CACHE_STALE;
- pC->seekResult = pOp->p3;
-#ifdef SQLITE_DEBUG
- pC->seekOp = OP_Last;
-#endif
+ if( rc ) goto abort_due_to_error;
if( pOp->p2>0 ){
VdbeBranchTaken(res!=0,2);
if( res ) goto jump_to_p2;
break;
}
+/* Opcode: IfSmaller P1 P2 P3 * *
+**
+** Estimate the number of rows in the table P1. Jump to P2 if that
+** estimate is less than approximately 2**(0.1*P3).
+*/
+case OP_IfSmaller: { /* jump */
+ VdbeCursor *pC;
+ BtCursor *pCrsr;
+ int res;
+ i64 sz;
+
+ assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+ pC = p->apCsr[pOp->p1];
+ assert( pC!=0 );
+ pCrsr = pC->uc.pCursor;
+ assert( pCrsr );
+ rc = sqlite3BtreeFirst(pCrsr, &res);
+ if( rc ) goto abort_due_to_error;
+ if( res==0 ){
+ sz = sqlite3BtreeRowCountEst(pCrsr);
+ if( ALWAYS(sz>=0) && sqlite3LogEst((u64)sz)<pOp->p3 ) res = 1;
+ }
+ VdbeBranchTaken(res!=0,2);
+ if( res ) goto jump_to_p2;
+ break;
+}
+
+/* Opcode: SorterSort P1 P2 * * *
+**
+** After all records have been inserted into the Sorter object
+** identified by P1, invoke this opcode to actually do the sorting.
+** Jump to P2 if there are no records to be sorted.
+**
+** This opcode is an alias for OP_Sort and OP_Rewind that is used
+** for Sorter objects.
+*/
/* Opcode: Sort P1 P2 * * *
**
** This opcode does exactly the same thing as OP_Rewind except that
if( isSorter(pC) ){
rc = sqlite3VdbeSorterRewind(pC, &res);
}else{
- pCrsr = pC->pCursor;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ pCrsr = pC->uc.pCursor;
assert( pCrsr );
rc = sqlite3BtreeFirst(pCrsr, &res);
pC->deferredMoveto = 0;
pC->cacheStatus = CACHE_STALE;
}
+ if( rc ) goto abort_due_to_error;
pC->nullRow = (u8)res;
assert( pOp->p2>0 && pOp->p2<p->nOp );
VdbeBranchTaken(res!=0,2);
** This opcode works just like Prev except that if cursor P1 is not
** open it behaves a no-op.
*/
+/* Opcode: SorterNext P1 P2 * * P5
+**
+** This opcode works just like OP_Next except that P1 must be a
+** sorter object for which the OP_SorterSort opcode has been
+** invoked. This opcode advances the cursor to the next sorted
+** record, or jumps to P2 if there are no more sorted records.
+*/
case OP_SorterNext: { /* jump */
VdbeCursor *pC;
- int res;
pC = p->apCsr[pOp->p1];
assert( isSorter(pC) );
- res = 0;
- rc = sqlite3VdbeSorterNext(db, pC, &res);
+ rc = sqlite3VdbeSorterNext(db, pC);
goto next_tail;
case OP_PrevIfOpen: /* jump */
case OP_NextIfOpen: /* jump */
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
assert( pOp->p5<ArraySize(p->aCounter) );
pC = p->apCsr[pOp->p1];
- res = pOp->p3;
assert( pC!=0 );
assert( pC->deferredMoveto==0 );
- assert( pC->pCursor );
- assert( res==0 || (res==1 && pC->isTable==0) );
- testcase( res==1 );
+ assert( pC->eCurType==CURTYPE_BTREE );
assert( pOp->opcode!=OP_Next || pOp->p4.xAdvance==sqlite3BtreeNext );
assert( pOp->opcode!=OP_Prev || pOp->p4.xAdvance==sqlite3BtreePrevious );
assert( pOp->opcode!=OP_NextIfOpen || pOp->p4.xAdvance==sqlite3BtreeNext );
|| pC->seekOp==OP_SeekLT || pC->seekOp==OP_SeekLE
|| pC->seekOp==OP_Last );
- rc = pOp->p4.xAdvance(pC->pCursor, &res);
+ rc = pOp->p4.xAdvance(pC->uc.pCursor, pOp->p3);
next_tail:
pC->cacheStatus = CACHE_STALE;
- VdbeBranchTaken(res==0,2);
- if( res==0 ){
+ VdbeBranchTaken(rc==SQLITE_OK,2);
+ if( rc==SQLITE_OK ){
pC->nullRow = 0;
p->aCounter[pOp->p5]++;
#ifdef SQLITE_TEST
sqlite3_search_count++;
#endif
goto jump_to_p2_and_check_for_interrupt;
- }else{
- pC->nullRow = 1;
}
+ if( rc!=SQLITE_DONE ) goto abort_due_to_error;
+ rc = SQLITE_OK;
+ pC->nullRow = 1;
goto check_for_interrupt;
}
-/* Opcode: IdxInsert P1 P2 P3 * P5
+/* Opcode: IdxInsert P1 P2 P3 P4 P5
** Synopsis: key=r[P2]
**
** Register P2 holds an SQL index key made using the
** MakeRecord instructions. This opcode writes that key
** into the index P1. Data for the entry is nil.
**
-** P3 is a flag that provides a hint to the b-tree layer that this
-** insert is likely to be an append.
+** If P4 is not zero, then it is the number of values in the unpacked
+** key of reg(P2). In that case, P3 is the index of the first register
+** for the unpacked key. The availability of the unpacked key can sometimes
+** be an optimization.
+**
+** If P5 has the OPFLAG_APPEND bit set, that is a hint to the b-tree layer
+** that this insert is likely to be an append.
**
** If P5 has the OPFLAG_NCHANGE bit set, then the change counter is
** incremented by this instruction. If the OPFLAG_NCHANGE bit is clear,
** then the change counter is unchanged.
**
-** If P5 has the OPFLAG_USESEEKRESULT bit set, then the cursor must have
-** just done a seek to the spot where the new entry is to be inserted.
-** This flag avoids doing an extra seek.
+** If the OPFLAG_USESEEKRESULT flag of P5 is set, the implementation might
+** run faster by avoiding an unnecessary seek on cursor P1. However,
+** the OPFLAG_USESEEKRESULT flag must only be set if there have been no prior
+** seeks on the cursor or if the most recent seek used a key equivalent
+** to P2.
**
** This instruction only works for indices. The equivalent instruction
** for tables is OP_Insert.
*/
+/* Opcode: SorterInsert P1 P2 * * *
+** Synopsis: key=r[P2]
+**
+** Register P2 holds an SQL index key made using the
+** MakeRecord instructions. This opcode writes that key
+** into the sorter P1. Data for the entry is nil.
+*/
case OP_SorterInsert: /* in2 */
case OP_IdxInsert: { /* in2 */
VdbeCursor *pC;
- int nKey;
- const char *zKey;
+ BtreePayload x;
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
pIn2 = &aMem[pOp->p2];
assert( pIn2->flags & MEM_Blob );
if( pOp->p5 & OPFLAG_NCHANGE ) p->nChange++;
- assert( pC->pCursor!=0 );
+ assert( pC->eCurType==CURTYPE_BTREE || pOp->opcode==OP_SorterInsert );
assert( pC->isTable==0 );
rc = ExpandBlob(pIn2);
- if( rc==SQLITE_OK ){
- if( pOp->opcode==OP_SorterInsert ){
- rc = sqlite3VdbeSorterWrite(pC, pIn2);
- }else{
- nKey = pIn2->n;
- zKey = pIn2->z;
- rc = sqlite3BtreeInsert(pC->pCursor, zKey, nKey, "", 0, 0, pOp->p3,
- ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0)
- );
- assert( pC->deferredMoveto==0 );
- pC->cacheStatus = CACHE_STALE;
- }
+ if( rc ) goto abort_due_to_error;
+ if( pOp->opcode==OP_SorterInsert ){
+ rc = sqlite3VdbeSorterWrite(pC, pIn2);
+ }else{
+ x.nKey = pIn2->n;
+ x.pKey = pIn2->z;
+ x.aMem = aMem + pOp->p3;
+ x.nMem = (u16)pOp->p4.i;
+ rc = sqlite3BtreeInsert(pC->uc.pCursor, &x,
+ (pOp->p5 & (OPFLAG_APPEND|OPFLAG_SAVEPOSITION)),
+ ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0)
+ );
+ assert( pC->deferredMoveto==0 );
+ pC->cacheStatus = CACHE_STALE;
}
+ if( rc) goto abort_due_to_error;
break;
}
UnpackedRecord r;
assert( pOp->p3>0 );
- assert( pOp->p2>0 && pOp->p2+pOp->p3<=(p->nMem-p->nCursor)+1 );
+ assert( pOp->p2>0 && pOp->p2+pOp->p3<=(p->nMem+1 - p->nCursor)+1 );
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- pCrsr = pC->pCursor;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ pCrsr = pC->uc.pCursor;
assert( pCrsr!=0 );
assert( pOp->p5==0 );
r.pKeyInfo = pC->pKeyInfo;
r.nField = (u16)pOp->p3;
r.default_rc = 0;
r.aMem = &aMem[pOp->p2];
-#ifdef SQLITE_DEBUG
- { int i; for(i=0; i<r.nField; i++) assert( memIsValid(&r.aMem[i]) ); }
-#endif
rc = sqlite3BtreeMovetoUnpacked(pCrsr, &r, 0, 0, &res);
- if( rc==SQLITE_OK && res==0 ){
- rc = sqlite3BtreeDelete(pCrsr, 0);
+ if( rc ) goto abort_due_to_error;
+ if( res==0 ){
+ rc = sqlite3BtreeDelete(pCrsr, BTREE_AUXDELETE);
+ if( rc ) goto abort_due_to_error;
}
assert( pC->deferredMoveto==0 );
pC->cacheStatus = CACHE_STALE;
+ pC->seekResult = 0;
break;
}
+/* Opcode: DeferredSeek P1 * P3 P4 *
+** Synopsis: Move P3 to P1.rowid if needed
+**
+** P1 is an open index cursor and P3 is a cursor on the corresponding
+** table. This opcode does a deferred seek of the P3 table cursor
+** to the row that corresponds to the current row of P1.
+**
+** This is a deferred seek. Nothing actually happens until
+** the cursor is used to read a record. That way, if no reads
+** occur, no unnecessary I/O happens.
+**
+** P4 may be an array of integers (type P4_INTARRAY) containing
+** one entry for each column in the P3 table. If array entry a(i)
+** is non-zero, then reading column a(i)-1 from cursor P3 is
+** equivalent to performing the deferred seek and then reading column i
+** from P1. This information is stored in P3 and used to redirect
+** reads against P3 over to P1, thus possibly avoiding the need to
+** seek and read cursor P3.
+*/
/* Opcode: IdxRowid P1 P2 * * *
** Synopsis: r[P2]=rowid
**
**
** See also: Rowid, MakeRecord.
*/
-case OP_IdxRowid: { /* out2 */
- BtCursor *pCrsr;
- VdbeCursor *pC;
- i64 rowid;
+case OP_DeferredSeek:
+case OP_IdxRowid: { /* out2 */
+ VdbeCursor *pC; /* The P1 index cursor */
+ VdbeCursor *pTabCur; /* The P2 table cursor (OP_DeferredSeek only) */
+ i64 rowid; /* Rowid that P1 current points to */
- pOut = out2Prerelease(p, pOp);
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- pCrsr = pC->pCursor;
- assert( pCrsr!=0 );
- pOut->flags = MEM_Null;
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0 );
assert( pC->isTable==0 );
assert( pC->deferredMoveto==0 );
+ assert( !pC->nullRow || pOp->opcode==OP_IdxRowid );
- /* sqlite3VbeCursorRestore() can only fail if the record has been deleted
- ** out from under the cursor. That will never happend for an IdxRowid
- ** opcode, hence the NEVER() arround the check of the return value.
- */
+ /* The IdxRowid and Seek opcodes are combined because of the commonality
+ ** of sqlite3VdbeCursorRestore() and sqlite3VdbeIdxRowid(). */
rc = sqlite3VdbeCursorRestore(pC);
+
+ /* sqlite3VbeCursorRestore() can only fail if the record has been deleted
+ ** out from under the cursor. That will never happens for an IdxRowid
+ ** or Seek opcode */
if( NEVER(rc!=SQLITE_OK) ) goto abort_due_to_error;
if( !pC->nullRow ){
rowid = 0; /* Not needed. Only used to silence a warning. */
- rc = sqlite3VdbeIdxRowid(db, pCrsr, &rowid);
+ rc = sqlite3VdbeIdxRowid(db, pC->uc.pCursor, &rowid);
if( rc!=SQLITE_OK ){
goto abort_due_to_error;
}
- pOut->u.i = rowid;
- pOut->flags = MEM_Int;
+ if( pOp->opcode==OP_DeferredSeek ){
+ assert( pOp->p3>=0 && pOp->p3<p->nCursor );
+ pTabCur = p->apCsr[pOp->p3];
+ assert( pTabCur!=0 );
+ assert( pTabCur->eCurType==CURTYPE_BTREE );
+ assert( pTabCur->uc.pCursor!=0 );
+ assert( pTabCur->isTable );
+ pTabCur->nullRow = 0;
+ pTabCur->movetoTarget = rowid;
+ pTabCur->deferredMoveto = 1;
+ assert( pOp->p4type==P4_INTARRAY || pOp->p4.ai==0 );
+ pTabCur->aAltMap = pOp->p4.ai;
+ pTabCur->pAltCursor = pC;
+ }else{
+ pOut = out2Prerelease(p, pOp);
+ pOut->u.i = rowid;
+ }
+ }else{
+ assert( pOp->opcode==OP_IdxRowid );
+ sqlite3VdbeMemSetNull(&aMem[pOp->p2]);
}
break;
}
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
assert( pC->isOrdered );
- assert( pC->pCursor!=0);
+ assert( pC->eCurType==CURTYPE_BTREE );
+ assert( pC->uc.pCursor!=0);
assert( pC->deferredMoveto==0 );
assert( pOp->p5==0 || pOp->p5==1 );
assert( pOp->p4type==P4_INT32 );
res++;
}
VdbeBranchTaken(res>0,2);
+ if( rc ) goto abort_due_to_error;
if( res>0 ) goto jump_to_p2;
break;
}
** might be moved into the newly deleted root page in order to keep all
** root pages contiguous at the beginning of the database. The former
** value of the root page that moved - its value before the move occurred -
-** is stored in register P2. If no page
-** movement was required (because the table being dropped was already
-** the last one in the database) then a zero is stored in register P2.
-** If AUTOVACUUM is disabled then a zero is stored in register P2.
+** is stored in register P2. If no page movement was required (because the
+** table being dropped was already the last one in the database) then a
+** zero is stored in register P2. If AUTOVACUUM is disabled then a zero
+** is stored in register P2.
+**
+** This opcode throws an error if there are any active reader VMs when
+** it is invoked. This is done to avoid the difficulty associated with
+** updating existing cursors when a root page is moved in an AUTOVACUUM
+** database. This error is thrown even if the database is not an AUTOVACUUM
+** db in order to avoid introducing an incompatibility between autovacuum
+** and non-autovacuum modes.
**
** See also: Clear
*/
int iDb;
assert( p->readOnly==0 );
+ assert( pOp->p1>1 );
pOut = out2Prerelease(p, pOp);
pOut->flags = MEM_Null;
if( db->nVdbeRead > db->nVDestroy+1 ){
rc = SQLITE_LOCKED;
p->errorAction = OE_Abort;
+ goto abort_due_to_error;
}else{
iDb = pOp->p3;
assert( DbMaskTest(p->btreeMask, iDb) );
rc = sqlite3BtreeDropTable(db->aDb[iDb].pBt, pOp->p1, &iMoved);
pOut->flags = MEM_Int;
pOut->u.i = iMoved;
+ if( rc ) goto abort_due_to_error;
#ifndef SQLITE_OMIT_AUTOVACUUM
- if( rc==SQLITE_OK && iMoved!=0 ){
+ if( iMoved!=0 ){
sqlite3RootPageMoved(db, iDb, iMoved, pOp->p1);
/* All OP_Destroy operations occur on the same btree */
assert( resetSchemaOnFault==0 || resetSchemaOnFault==iDb+1 );
aMem[pOp->p3].u.i += nChange;
}
}
+ if( rc ) goto abort_due_to_error;
break;
}
assert( pOp->p1>=0 && pOp->p1<p->nCursor );
pC = p->apCsr[pOp->p1];
assert( pC!=0 );
- if( pC->pSorter ){
- sqlite3VdbeSorterReset(db, pC->pSorter);
+ if( isSorter(pC) ){
+ sqlite3VdbeSorterReset(db, pC->uc.pSorter);
}else{
+ assert( pC->eCurType==CURTYPE_BTREE );
assert( pC->isEphemeral );
- rc = sqlite3BtreeClearTableOfCursor(pC->pCursor);
+ rc = sqlite3BtreeClearTableOfCursor(pC->uc.pCursor);
+ if( rc ) goto abort_due_to_error;
}
break;
}
-/* Opcode: CreateTable P1 P2 * * *
-** Synopsis: r[P2]=root iDb=P1
-**
-** Allocate a new table in the main database file if P1==0 or in the
-** auxiliary database file if P1==1 or in an attached database if
-** P1>1. Write the root page number of the new table into
-** register P2
+/* Opcode: CreateBtree P1 P2 P3 * *
+** Synopsis: r[P2]=root iDb=P1 flags=P3
**
-** The difference between a table and an index is this: A table must
-** have a 4-byte integer key and can have arbitrary data. An index
-** has an arbitrary key but no data.
-**
-** See also: CreateIndex
+** Allocate a new b-tree in the main database file if P1==0 or in the
+** TEMP database file if P1==1 or in an attached database if
+** P1>1. The P3 argument must be 1 (BTREE_INTKEY) for a rowid table
+** it must be 2 (BTREE_BLOBKEY) for a index or WITHOUT ROWID table.
+** The root page number of the new b-tree is stored in register P2.
*/
-/* Opcode: CreateIndex P1 P2 * * *
-** Synopsis: r[P2]=root iDb=P1
-**
-** Allocate a new index in the main database file if P1==0 or in the
-** auxiliary database file if P1==1 or in an attached database if
-** P1>1. Write the root page number of the new table into
-** register P2.
-**
-** See documentation on OP_CreateTable for additional information.
-*/
-case OP_CreateIndex: /* out2 */
-case OP_CreateTable: { /* out2 */
+case OP_CreateBtree: { /* out2 */
int pgno;
- int flags;
Db *pDb;
pOut = out2Prerelease(p, pOp);
pgno = 0;
+ assert( pOp->p3==BTREE_INTKEY || pOp->p3==BTREE_BLOBKEY );
assert( pOp->p1>=0 && pOp->p1<db->nDb );
assert( DbMaskTest(p->btreeMask, pOp->p1) );
assert( p->readOnly==0 );
pDb = &db->aDb[pOp->p1];
assert( pDb->pBt!=0 );
- if( pOp->opcode==OP_CreateTable ){
- /* flags = BTREE_INTKEY; */
- flags = BTREE_INTKEY;
- }else{
- flags = BTREE_BLOBKEY;
- }
- rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, flags);
+ rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, pOp->p3);
+ if( rc ) goto abort_due_to_error;
pOut->u.i = pgno;
break;
}
+/* Opcode: SqlExec * * * P4 *
+**
+** Run the SQL statement or statements specified in the P4 string.
+*/
+case OP_SqlExec: {
+ db->nSqlExec++;
+ rc = sqlite3_exec(db, pOp->p4.z, 0, 0, 0);
+ db->nSqlExec--;
+ if( rc ) goto abort_due_to_error;
+ break;
+}
+
/* Opcode: ParseSchema P1 * * P4 *
**
** Read and parse all entries from the SQLITE_MASTER table of database P1
assert( iDb>=0 && iDb<db->nDb );
assert( DbHasProperty(db, iDb, DB_SchemaLoaded) );
/* Used to be a conditional */ {
- zMaster = SCHEMA_TABLE(iDb);
+ zMaster = MASTER_NAME;
initData.db = db;
initData.iDb = pOp->p1;
initData.pzErrMsg = &p->zErrMsg;
zSql = sqlite3MPrintf(db,
"SELECT name, rootpage, sql FROM '%q'.%s WHERE %s ORDER BY rowid",
- db->aDb[iDb].zName, zMaster, pOp->p4.z);
+ db->aDb[iDb].zDbSName, zMaster, pOp->p4.z);
if( zSql==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
assert( db->init.busy==0 );
db->init.busy = 1;
assert( !db->mallocFailed );
rc = sqlite3_exec(db, zSql, sqlite3InitCallback, &initData, 0);
if( rc==SQLITE_OK ) rc = initData.rc;
- sqlite3DbFree(db, zSql);
+ sqlite3DbFreeNN(db, zSql);
db->init.busy = 0;
}
}
- if( rc ) sqlite3ResetAllSchemasOfConnection(db);
- if( rc==SQLITE_NOMEM ){
- goto no_mem;
+ if( rc ){
+ sqlite3ResetAllSchemasOfConnection(db);
+ if( rc==SQLITE_NOMEM ){
+ goto no_mem;
+ }
+ goto abort_due_to_error;
}
break;
}
case OP_LoadAnalysis: {
assert( pOp->p1>=0 && pOp->p1<db->nDb );
rc = sqlite3AnalysisLoad(db, pOp->p1);
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* !defined(SQLITE_OMIT_ANALYZE) */
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
-/* Opcode: IntegrityCk P1 P2 P3 * P5
+/* Opcode: IntegrityCk P1 P2 P3 P4 P5
**
** Do an analysis of the currently open database. Store in
** register P1 the text of an error message describing any problems.
** If no problems are found, store a NULL in register P1.
**
-** The register P3 contains the maximum number of allowed errors.
+** The register P3 contains one less than the maximum number of allowed errors.
** At most reg(P3) errors will be reported.
** In other words, the analysis stops as soon as reg(P1) errors are
** seen. Reg(P1) is updated with the number of errors remaining.
**
-** The root page numbers of all tables in the database are integer
-** stored in reg(P1), reg(P1+1), reg(P1+2), .... There are P2 tables
-** total.
+** The root page numbers of all tables in the database are integers
+** stored in P4_INTARRAY argument.
**
** If P5 is not zero, the check is done on the auxiliary database
** file, not the main database file.
case OP_IntegrityCk: {
int nRoot; /* Number of tables to check. (Number of root pages.) */
int *aRoot; /* Array of rootpage numbers for tables to be checked */
- int j; /* Loop counter */
int nErr; /* Number of errors reported */
char *z; /* Text of the error report */
Mem *pnErr; /* Register keeping track of errors remaining */
assert( p->bIsReader );
nRoot = pOp->p2;
+ aRoot = pOp->p4.ai;
assert( nRoot>0 );
- aRoot = sqlite3DbMallocRaw(db, sizeof(int)*(nRoot+1) );
- if( aRoot==0 ) goto no_mem;
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
+ assert( aRoot[0]==nRoot );
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
pnErr = &aMem[pOp->p3];
assert( (pnErr->flags & MEM_Int)!=0 );
assert( (pnErr->flags & (MEM_Str|MEM_Blob))==0 );
pIn1 = &aMem[pOp->p1];
- for(j=0; j<nRoot; j++){
- aRoot[j] = (int)sqlite3VdbeIntValue(&pIn1[j]);
- }
- aRoot[j] = 0;
assert( pOp->p5<db->nDb );
assert( DbMaskTest(p->btreeMask, pOp->p5) );
- z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, aRoot, nRoot,
- (int)pnErr->u.i, &nErr);
- sqlite3DbFree(db, aRoot);
- pnErr->u.i -= nErr;
+ z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, &aRoot[1], nRoot,
+ (int)pnErr->u.i+1, &nErr);
sqlite3VdbeMemSetNull(pIn1);
if( nErr==0 ){
assert( z==0 );
}else if( z==0 ){
goto no_mem;
}else{
+ pnErr->u.i -= nErr-1;
sqlite3VdbeMemSetStr(pIn1, z, -1, SQLITE_UTF8, sqlite3_free);
}
UPDATE_MAX_BLOBSIZE(pIn1);
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
/* Opcode: RowSetAdd P1 P2 * * *
-** Synopsis: rowset(P1)=r[P2]
+** Synopsis: rowset(P1)=r[P2]
**
-** Insert the integer value held by register P2 into a boolean index
+** Insert the integer value held by register P2 into a RowSet object
** held in register P1.
**
** An assertion fails if P2 is not an integer.
}
/* Opcode: RowSetRead P1 P2 P3 * *
-** Synopsis: r[P3]=rowset(P1)
+** Synopsis: r[P3]=rowset(P1)
**
-** Extract the smallest value from boolean index P1 and put that value into
-** register P3. Or, if boolean index P1 is initially empty, leave P3
+** Extract the smallest value from the RowSet object in P1
+** and put that value into register P3.
+** Or, if RowSet object P1 is initially empty, leave P3
** unchanged and jump to instruction P2.
*/
case OP_RowSetRead: { /* jump, in1, out3 */
** integer in P3 into the RowSet and continue on to the
** next opcode.
**
-** The RowSet object is optimized for the case where successive sets
-** of integers, where each set contains no duplicates. Each set
-** of values is identified by a unique P4 value. The first set
-** must have P4==0, the final set P4=-1. P4 must be either -1 or
-** non-negative. For non-negative values of P4 only the lower 4
-** bits are significant.
+** The RowSet object is optimized for the case where sets of integers
+** are inserted in distinct phases, which each set contains no duplicates.
+** Each set is identified by a unique P4 value. The first set
+** must have P4==0, the final set must have P4==-1, and for all other sets
+** must have P4>0.
**
** This allows optimizations: (a) when P4==0 there is no need to test
-** the rowset object for P3, as it is guaranteed not to contain it,
+** the RowSet object for P3, as it is guaranteed not to contain it,
** (b) when P4==-1 there is no need to insert the value, as it will
** never be tested for, and (c) when a value that is part of set X is
** inserted, there is no need to search to see if the same value was
if( p->nFrame>=db->aLimit[SQLITE_LIMIT_TRIGGER_DEPTH] ){
rc = SQLITE_ERROR;
sqlite3VdbeError(p, "too many levels of trigger recursion");
- break;
+ goto abort_due_to_error;
}
/* Register pRt is used to store the memory required to save the state
** variable nMem (and later, VdbeFrame.nChildMem) to this value.
*/
nMem = pProgram->nMem + pProgram->nCsr;
+ assert( nMem>0 );
+ if( pProgram->nCsr==0 ) nMem++;
nByte = ROUND8(sizeof(VdbeFrame))
+ nMem * sizeof(Mem)
- + pProgram->nCsr * sizeof(VdbeCursor *)
- + pProgram->nOnce * sizeof(u8);
+ + pProgram->nCsr * sizeof(VdbeCursor*)
+ + (pProgram->nOp + 7)/8;
pFrame = sqlite3DbMallocZero(db, nByte);
if( !pFrame ){
goto no_mem;
pFrame->aOp = p->aOp;
pFrame->nOp = p->nOp;
pFrame->token = pProgram->token;
- pFrame->aOnceFlag = p->aOnceFlag;
- pFrame->nOnceFlag = p->nOnceFlag;
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
pFrame->anExec = p->anExec;
#endif
}
}else{
pFrame = pRt->u.pFrame;
- assert( pProgram->nMem+pProgram->nCsr==pFrame->nChildMem );
+ assert( pProgram->nMem+pProgram->nCsr==pFrame->nChildMem
+ || (pProgram->nCsr==0 && pProgram->nMem+1==pFrame->nChildMem) );
assert( pProgram->nCsr==pFrame->nChildCsr );
assert( (int)(pOp - aOp)==pFrame->pc );
}
p->nFrame++;
pFrame->pParent = p->pFrame;
- pFrame->lastRowid = lastRowid;
+ pFrame->lastRowid = db->lastRowid;
pFrame->nChange = p->nChange;
pFrame->nDbChange = p->db->nChange;
+ assert( pFrame->pAuxData==0 );
+ pFrame->pAuxData = p->pAuxData;
+ p->pAuxData = 0;
p->nChange = 0;
p->pFrame = pFrame;
- p->aMem = aMem = &VdbeFrameMem(pFrame)[-1];
+ p->aMem = aMem = VdbeFrameMem(pFrame);
p->nMem = pFrame->nChildMem;
p->nCursor = (u16)pFrame->nChildCsr;
- p->apCsr = (VdbeCursor **)&aMem[p->nMem+1];
+ p->apCsr = (VdbeCursor **)&aMem[p->nMem];
+ pFrame->aOnce = (u8*)&p->apCsr[pProgram->nCsr];
+ memset(pFrame->aOnce, 0, (pProgram->nOp + 7)/8);
p->aOp = aOp = pProgram->aOp;
p->nOp = pProgram->nOp;
- p->aOnceFlag = (u8 *)&p->apCsr[p->nCursor];
- p->nOnceFlag = pProgram->nOnce;
#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
p->anExec = 0;
#endif
pOp = &aOp[-1];
- memset(p->aOnceFlag, 0, p->nOnceFlag);
break;
}
break;
}
-/* Opcode: SetIfNotPos P1 P2 P3 * *
-** Synopsis: if r[P1]<=0 then r[P2]=P3
+/* Opcode: OffsetLimit P1 P2 P3 * *
+** Synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)
**
-** Register P1 must contain an integer.
-** If the value of register P1 is not positive (if it is less than 1) then
-** set the value of register P2 to be the integer P3.
+** This opcode performs a commonly used computation associated with
+** LIMIT and OFFSET process. r[P1] holds the limit counter. r[P3]
+** holds the offset counter. The opcode computes the combined value
+** of the LIMIT and OFFSET and stores that value in r[P2]. The r[P2]
+** value computed is the total number of rows that will need to be
+** visited in order to complete the query.
+**
+** If r[P3] is zero or negative, that means there is no OFFSET
+** and r[P2] is set to be the value of the LIMIT, r[P1].
+**
+** if r[P1] is zero or negative, that means there is no LIMIT
+** and r[P2] is set to -1.
+**
+** Otherwise, r[P2] is set to the sum of r[P1] and r[P3].
*/
-case OP_SetIfNotPos: { /* in1, in2 */
+case OP_OffsetLimit: { /* in1, out2, in3 */
+ i64 x;
pIn1 = &aMem[pOp->p1];
- assert( pIn1->flags&MEM_Int );
- if( pIn1->u.i<=0 ){
- pOut = out2Prerelease(p, pOp);
- pOut->u.i = pOp->p3;
+ pIn3 = &aMem[pOp->p3];
+ pOut = out2Prerelease(p, pOp);
+ assert( pIn1->flags & MEM_Int );
+ assert( pIn3->flags & MEM_Int );
+ x = pIn1->u.i;
+ if( x<=0 || sqlite3AddInt64(&x, pIn3->u.i>0?pIn3->u.i:0) ){
+ /* If the LIMIT is less than or equal to zero, loop forever. This
+ ** is documented. But also, if the LIMIT+OFFSET exceeds 2^63 then
+ ** also loop forever. This is undocumented. In fact, one could argue
+ ** that the loop should terminate. But assuming 1 billion iterations
+ ** per second (far exceeding the capabilities of any current hardware)
+ ** it would take nearly 300 years to actually reach the limit. So
+ ** looping forever is a reasonable approximation. */
+ pOut->u.i = -1;
+ }else{
+ pOut->u.i = x;
}
break;
}
-/* Opcode: IfNotZero P1 P2 P3 * *
-** Synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2
+/* Opcode: IfNotZero P1 P2 * * *
+** Synopsis: if r[P1]!=0 then r[P1]--, goto P2
**
** Register P1 must contain an integer. If the content of register P1 is
-** initially nonzero, then subtract P3 from the value in register P1 and
-** jump to P2. If register P1 is initially zero, leave it unchanged
-** and fall through.
+** initially greater than zero, then decrement the value in register P1.
+** If it is non-zero (negative or positive) and then also jump to P2.
+** If register P1 is initially zero, leave it unchanged and fall through.
*/
case OP_IfNotZero: { /* jump, in1 */
pIn1 = &aMem[pOp->p1];
assert( pIn1->flags&MEM_Int );
VdbeBranchTaken(pIn1->u.i<0, 2);
if( pIn1->u.i ){
- pIn1->u.i -= pOp->p3;
+ if( pIn1->u.i>0 ) pIn1->u.i--;
goto jump_to_p2;
}
break;
/* Opcode: DecrJumpZero P1 P2 * * *
** Synopsis: if (--r[P1])==0 goto P2
**
-** Register P1 must hold an integer. Decrement the value in register P1
-** then jump to P2 if the new value is exactly zero.
+** Register P1 must hold an integer. Decrement the value in P1
+** and jump to P2 if the new value is exactly zero.
*/
case OP_DecrJumpZero: { /* jump, in1 */
pIn1 = &aMem[pOp->p1];
assert( pIn1->flags&MEM_Int );
- pIn1->u.i--;
+ if( pIn1->u.i>SMALLEST_INT64 ) pIn1->u.i--;
VdbeBranchTaken(pIn1->u.i==0, 2);
if( pIn1->u.i==0 ) goto jump_to_p2;
break;
}
-/* Opcode: JumpZeroIncr P1 P2 * * *
-** Synopsis: if (r[P1]++)==0 ) goto P2
-**
-** The register P1 must contain an integer. If register P1 is initially
-** zero, then jump to P2. Increment register P1 regardless of whether or
-** not the jump is taken.
-*/
-case OP_JumpZeroIncr: { /* jump, in1 */
- pIn1 = &aMem[pOp->p1];
- assert( pIn1->flags&MEM_Int );
- VdbeBranchTaken(pIn1->u.i==0, 2);
- if( (pIn1->u.i++)==0 ) goto jump_to_p2;
- break;
-}
-
/* Opcode: AggStep0 * P2 P3 P4 P5
** Synopsis: accum=r[P3] step(r[P2@P5])
**
assert( pOp->p4type==P4_FUNCDEF );
n = pOp->p5;
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
- assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem-p->nCursor)+1) );
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
+ assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) );
assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n );
- pCtx = sqlite3DbMallocRaw(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*));
+ pCtx = sqlite3DbMallocRawNN(db, n*sizeof(sqlite3_value*) +
+ (sizeof(pCtx[0]) + sizeof(Mem) - sizeof(sqlite3_value*)));
if( pCtx==0 ) goto no_mem;
pCtx->pMem = 0;
+ pCtx->pOut = (Mem*)&(pCtx->argv[n]);
+ sqlite3VdbeMemInit(pCtx->pOut, db, MEM_Null);
pCtx->pFunc = pOp->p4.pFunc;
pCtx->iOp = (int)(pOp - aOp);
pCtx->pVdbe = p;
+ pCtx->skipFlag = 0;
+ pCtx->isError = 0;
pCtx->argc = n;
pOp->p4type = P4_FUNCCTX;
pOp->p4.pCtx = pCtx;
int i;
sqlite3_context *pCtx;
Mem *pMem;
- Mem t;
assert( pOp->p4type==P4_FUNCCTX );
pCtx = pOp->p4.pCtx;
#endif
pMem->n++;
- sqlite3VdbeMemInit(&t, db, MEM_Null);
- pCtx->pOut = &t;
- pCtx->fErrorOrAux = 0;
- pCtx->skipFlag = 0;
- (pCtx->pFunc->xStep)(pCtx,pCtx->argc,pCtx->argv); /* IMP: R-24505-23230 */
- if( pCtx->fErrorOrAux ){
- if( pCtx->isError ){
- sqlite3VdbeError(p, "%s", sqlite3_value_text(&t));
+ assert( pCtx->pOut->flags==MEM_Null );
+ assert( pCtx->isError==0 );
+ assert( pCtx->skipFlag==0 );
+ (pCtx->pFunc->xSFunc)(pCtx,pCtx->argc,pCtx->argv); /* IMP: R-24505-23230 */
+ if( pCtx->isError ){
+ if( pCtx->isError>0 ){
+ sqlite3VdbeError(p, "%s", sqlite3_value_text(pCtx->pOut));
rc = pCtx->isError;
}
- sqlite3VdbeMemRelease(&t);
- }else{
- assert( t.flags==MEM_Null );
- }
- if( pCtx->skipFlag ){
- assert( pOp[-1].opcode==OP_CollSeq );
- i = pOp[-1].p1;
- if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1);
+ if( pCtx->skipFlag ){
+ assert( pOp[-1].opcode==OP_CollSeq );
+ i = pOp[-1].p1;
+ if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1);
+ pCtx->skipFlag = 0;
+ }
+ sqlite3VdbeMemRelease(pCtx->pOut);
+ pCtx->pOut->flags = MEM_Null;
+ pCtx->isError = 0;
+ if( rc ) goto abort_due_to_error;
}
+ assert( pCtx->pOut->flags==MEM_Null );
+ assert( pCtx->skipFlag==0 );
break;
}
*/
case OP_AggFinal: {
Mem *pMem;
- assert( pOp->p1>0 && pOp->p1<=(p->nMem-p->nCursor) );
+ assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) );
pMem = &aMem[pOp->p1];
assert( (pMem->flags & ~(MEM_Null|MEM_Agg))==0 );
rc = sqlite3VdbeMemFinalize(pMem, pOp->p4.pFunc);
if( rc ){
sqlite3VdbeError(p, "%s", sqlite3_value_text(pMem));
+ goto abort_due_to_error;
}
sqlite3VdbeChangeEncoding(pMem, encoding);
UPDATE_MAX_BLOBSIZE(pMem);
|| pOp->p2==SQLITE_CHECKPOINT_TRUNCATE
);
rc = sqlite3Checkpoint(db, pOp->p1, pOp->p2, &aRes[1], &aRes[2]);
- if( rc==SQLITE_BUSY ){
+ if( rc ){
+ if( rc!=SQLITE_BUSY ) goto abort_due_to_error;
rc = SQLITE_OK;
aRes[0] = 1;
}
"cannot change %s wal mode from within a transaction",
(eNew==PAGER_JOURNALMODE_WAL ? "into" : "out of")
);
- break;
+ goto abort_due_to_error;
}else{
if( eOld==PAGER_JOURNALMODE_WAL ){
** file. An EXCLUSIVE lock may still be held on the database file
** after a successful return.
*/
- rc = sqlite3PagerCloseWal(pPager);
+ rc = sqlite3PagerCloseWal(pPager, db);
if( rc==SQLITE_OK ){
sqlite3PagerSetJournalMode(pPager, eNew);
}
}
#endif /* ifndef SQLITE_OMIT_WAL */
- if( rc ){
- eNew = eOld;
- }
+ if( rc ) eNew = eOld;
eNew = sqlite3PagerSetJournalMode(pPager, eNew);
pOut->flags = MEM_Str|MEM_Static|MEM_Term;
pOut->n = sqlite3Strlen30(pOut->z);
pOut->enc = SQLITE_UTF8;
sqlite3VdbeChangeEncoding(pOut, encoding);
+ if( rc ) goto abort_due_to_error;
break;
};
#endif /* SQLITE_OMIT_PRAGMA */
#if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH)
-/* Opcode: Vacuum * * * * *
+/* Opcode: Vacuum P1 * * * *
**
-** Vacuum the entire database. This opcode will cause other virtual
-** machines to be created and run. It may not be called from within
-** a transaction.
+** Vacuum the entire database P1. P1 is 0 for "main", and 2 or more
+** for an attached database. The "temp" database may not be vacuumed.
*/
case OP_Vacuum: {
assert( p->readOnly==0 );
- rc = sqlite3RunVacuum(&p->zErrMsg, db);
+ rc = sqlite3RunVacuum(&p->zErrMsg, db, pOp->p1);
+ if( rc ) goto abort_due_to_error;
break;
}
#endif
pBt = db->aDb[pOp->p1].pBt;
rc = sqlite3BtreeIncrVacuum(pBt);
VdbeBranchTaken(rc==SQLITE_DONE,2);
- if( rc==SQLITE_DONE ){
+ if( rc ){
+ if( rc!=SQLITE_DONE ) goto abort_due_to_error;
rc = SQLITE_OK;
goto jump_to_p2;
}
*/
case OP_TableLock: {
u8 isWriteLock = (u8)pOp->p3;
- if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommitted) ){
+ if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommit) ){
int p1 = pOp->p1;
assert( p1>=0 && p1<db->nDb );
assert( DbMaskTest(p->btreeMask, p1) );
assert( isWriteLock==0 || isWriteLock==1 );
rc = sqlite3BtreeLockTable(db->aDb[p1].pBt, pOp->p2, isWriteLock);
- if( (rc&0xFF)==SQLITE_LOCKED ){
- const char *z = pOp->p4.z;
- sqlite3VdbeError(p, "database table is locked: %s", z);
+ if( rc ){
+ if( (rc&0xFF)==SQLITE_LOCKED ){
+ const char *z = pOp->p4.z;
+ sqlite3VdbeError(p, "database table is locked: %s", z);
+ }
+ goto abort_due_to_error;
}
}
break;
pVTab = pOp->p4.pVtab;
rc = sqlite3VtabBegin(db, pVTab);
if( pVTab ) sqlite3VtabImportErrmsg(p, pVTab->pVtab);
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
rc = sqlite3VtabCallCreate(db, pOp->p1, zTab, &p->zErrMsg);
}
sqlite3VdbeMemRelease(&sMem);
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
db->nVDestroy++;
rc = sqlite3VtabCallDestroy(db, pOp->p1, pOp->p4.z);
db->nVDestroy--;
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
*/
case OP_VOpen: {
VdbeCursor *pCur;
- sqlite3_vtab_cursor *pVtabCursor;
+ sqlite3_vtab_cursor *pVCur;
sqlite3_vtab *pVtab;
const sqlite3_module *pModule;
assert( p->bIsReader );
pCur = 0;
- pVtabCursor = 0;
+ pVCur = 0;
pVtab = pOp->p4.pVtab->pVtab;
if( pVtab==0 || NEVER(pVtab->pModule==0) ){
rc = SQLITE_LOCKED;
- break;
+ goto abort_due_to_error;
}
pModule = pVtab->pModule;
- rc = pModule->xOpen(pVtab, &pVtabCursor);
+ rc = pModule->xOpen(pVtab, &pVCur);
sqlite3VtabImportErrmsg(p, pVtab);
- if( SQLITE_OK==rc ){
- /* Initialize sqlite3_vtab_cursor base class */
- pVtabCursor->pVtab = pVtab;
+ if( rc ) goto abort_due_to_error;
- /* Initialize vdbe cursor object */
- pCur = allocateCursor(p, pOp->p1, 0, -1, 0);
- if( pCur ){
- pCur->pVtabCursor = pVtabCursor;
- pVtab->nRef++;
- }else{
- assert( db->mallocFailed );
- pModule->xClose(pVtabCursor);
- goto no_mem;
- }
+ /* Initialize sqlite3_vtab_cursor base class */
+ pVCur->pVtab = pVtab;
+
+ /* Initialize vdbe cursor object */
+ pCur = allocateCursor(p, pOp->p1, 0, -1, CURTYPE_VTAB);
+ if( pCur ){
+ pCur->uc.pVCur = pVCur;
+ pVtab->nRef++;
+ }else{
+ assert( db->mallocFailed );
+ pModule->xClose(pVCur);
+ goto no_mem;
}
break;
}
const sqlite3_module *pModule;
Mem *pQuery;
Mem *pArgc;
- sqlite3_vtab_cursor *pVtabCursor;
+ sqlite3_vtab_cursor *pVCur;
sqlite3_vtab *pVtab;
VdbeCursor *pCur;
int res;
pCur = p->apCsr[pOp->p1];
assert( memIsValid(pQuery) );
REGISTER_TRACE(pOp->p3, pQuery);
- assert( pCur->pVtabCursor );
- pVtabCursor = pCur->pVtabCursor;
- pVtab = pVtabCursor->pVtab;
+ assert( pCur->eCurType==CURTYPE_VTAB );
+ pVCur = pCur->uc.pVCur;
+ pVtab = pVCur->pVtab;
pModule = pVtab->pModule;
/* Grab the index number and argc parameters */
for(i = 0; i<nArg; i++){
apArg[i] = &pArgc[i+1];
}
- rc = pModule->xFilter(pVtabCursor, iQuery, pOp->p4.z, nArg, apArg);
+ rc = pModule->xFilter(pVCur, iQuery, pOp->p4.z, nArg, apArg);
sqlite3VtabImportErrmsg(p, pVtab);
- if( rc==SQLITE_OK ){
- res = pModule->xEof(pVtabCursor);
- }
+ if( rc ) goto abort_due_to_error;
+ res = pModule->xEof(pVCur);
pCur->nullRow = 0;
VdbeBranchTaken(res!=0,2);
if( res ) goto jump_to_p2;
#endif /* SQLITE_OMIT_VIRTUALTABLE */
#ifndef SQLITE_OMIT_VIRTUALTABLE
-/* Opcode: VColumn P1 P2 P3 * *
+/* Opcode: VColumn P1 P2 P3 * P5
** Synopsis: r[P3]=vcolumn(P2)
**
-** Store the value of the P2-th column of
-** the row of the virtual-table that the
-** P1 cursor is pointing to into register P3.
+** Store in register P3 the value of the P2-th column of
+** the current row of the virtual-table of cursor P1.
+**
+** If the VColumn opcode is being used to fetch the value of
+** an unchanging column during an UPDATE operation, then the P5
+** value is 1. Otherwise, P5 is 0. The P5 value is returned
+** by sqlite3_vtab_nochange() routine can can be used
+** by virtual table implementations to return special "no-change"
+** marks which can be more efficient, depending on the virtual table.
*/
case OP_VColumn: {
sqlite3_vtab *pVtab;
sqlite3_context sContext;
VdbeCursor *pCur = p->apCsr[pOp->p1];
- assert( pCur->pVtabCursor );
- assert( pOp->p3>0 && pOp->p3<=(p->nMem-p->nCursor) );
+ assert( pCur->eCurType==CURTYPE_VTAB );
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
pDest = &aMem[pOp->p3];
memAboutToChange(p, pDest);
if( pCur->nullRow ){
sqlite3VdbeMemSetNull(pDest);
break;
}
- pVtab = pCur->pVtabCursor->pVtab;
+ pVtab = pCur->uc.pVCur->pVtab;
pModule = pVtab->pModule;
assert( pModule->xColumn );
memset(&sContext, 0, sizeof(sContext));
sContext.pOut = pDest;
- MemSetTypeFlag(pDest, MEM_Null);
- rc = pModule->xColumn(pCur->pVtabCursor, &sContext, pOp->p2);
+ if( pOp->p5 ){
+ sqlite3VdbeMemSetNull(pDest);
+ pDest->flags = MEM_Null|MEM_Zero;
+ pDest->u.nZero = 0;
+ }else{
+ MemSetTypeFlag(pDest, MEM_Null);
+ }
+ rc = pModule->xColumn(pCur->uc.pVCur, &sContext, pOp->p2);
sqlite3VtabImportErrmsg(p, pVtab);
- if( sContext.isError ){
+ if( sContext.isError>0 ){
+ sqlite3VdbeError(p, "%s", sqlite3_value_text(pDest));
rc = sContext.isError;
}
sqlite3VdbeChangeEncoding(pDest, encoding);
if( sqlite3VdbeMemTooBig(pDest) ){
goto too_big;
}
+ if( rc ) goto abort_due_to_error;
break;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
res = 0;
pCur = p->apCsr[pOp->p1];
- assert( pCur->pVtabCursor );
+ assert( pCur->eCurType==CURTYPE_VTAB );
if( pCur->nullRow ){
break;
}
- pVtab = pCur->pVtabCursor->pVtab;
+ pVtab = pCur->uc.pVCur->pVtab;
pModule = pVtab->pModule;
assert( pModule->xNext );
** data is available) and the error code returned when xColumn or
** some other method is next invoked on the save virtual table cursor.
*/
- rc = pModule->xNext(pCur->pVtabCursor);
+ rc = pModule->xNext(pCur->uc.pVCur);
sqlite3VtabImportErrmsg(p, pVtab);
- if( rc==SQLITE_OK ){
- res = pModule->xEof(pCur->pVtabCursor);
- }
+ if( rc ) goto abort_due_to_error;
+ res = pModule->xEof(pCur->uc.pVCur);
VdbeBranchTaken(!res,2);
if( !res ){
/* If there is data, jump to P2 */
testcase( pName->enc==SQLITE_UTF16BE );
testcase( pName->enc==SQLITE_UTF16LE );
rc = sqlite3VdbeChangeEncoding(pName, SQLITE_UTF8);
- if( rc==SQLITE_OK ){
- rc = pVtab->pModule->xRename(pVtab, pName->z);
- sqlite3VtabImportErrmsg(p, pVtab);
- p->expired = 0;
- }
+ if( rc ) goto abort_due_to_error;
+ rc = pVtab->pModule->xRename(pVtab, pName->z);
+ sqlite3VtabImportErrmsg(p, pVtab);
+ p->expired = 0;
+ if( rc ) goto abort_due_to_error;
break;
}
#endif
pVtab = pOp->p4.pVtab->pVtab;
if( pVtab==0 || NEVER(pVtab->pModule==0) ){
rc = SQLITE_LOCKED;
- break;
+ goto abort_due_to_error;
}
pModule = pVtab->pModule;
nArg = pOp->p2;
sqlite3VtabImportErrmsg(p, pVtab);
if( rc==SQLITE_OK && pOp->p1 ){
assert( nArg>1 && apArg[0] && (apArg[0]->flags&MEM_Null) );
- db->lastRowid = lastRowid = rowid;
+ db->lastRowid = rowid;
}
if( (rc&0xff)==SQLITE_CONSTRAINT && pOp->p4.pVtab->bConstraint ){
if( pOp->p5==OE_Ignore ){
}else{
p->nChange++;
}
+ if( rc ) goto abort_due_to_error;
}
break;
}
}
#endif
+/* Opcode: Function0 P1 P2 P3 P4 P5
+** Synopsis: r[P3]=func(r[P2@P5])
+**
+** Invoke a user function (P4 is a pointer to a FuncDef object that
+** defines the function) with P5 arguments taken from register P2 and
+** successors. The result of the function is stored in register P3.
+** Register P3 must not be one of the function inputs.
+**
+** P1 is a 32-bit bitmask indicating whether or not each argument to the
+** function was determined to be constant at compile time. If the first
+** argument was constant then bit 0 of P1 is set. This is used to determine
+** whether meta data associated with a user function argument using the
+** sqlite3_set_auxdata() API may be safely retained until the next
+** invocation of this opcode.
+**
+** See also: Function, AggStep, AggFinal
+*/
+/* Opcode: Function P1 P2 P3 P4 P5
+** Synopsis: r[P3]=func(r[P2@P5])
+**
+** Invoke a user function (P4 is a pointer to an sqlite3_context object that
+** contains a pointer to the function to be run) with P5 arguments taken
+** from register P2 and successors. The result of the function is stored
+** in register P3. Register P3 must not be one of the function inputs.
+**
+** P1 is a 32-bit bitmask indicating whether or not each argument to the
+** function was determined to be constant at compile time. If the first
+** argument was constant then bit 0 of P1 is set. This is used to determine
+** whether meta data associated with a user function argument using the
+** sqlite3_set_auxdata() API may be safely retained until the next
+** invocation of this opcode.
+**
+** SQL functions are initially coded as OP_Function0 with P4 pointing
+** to a FuncDef object. But on first evaluation, the P4 operand is
+** automatically converted into an sqlite3_context object and the operation
+** changed to this OP_Function opcode. In this way, the initialization of
+** the sqlite3_context object occurs only once, rather than once for each
+** evaluation of the function.
+**
+** See also: Function0, AggStep, AggFinal
+*/
+case OP_PureFunc0:
+case OP_Function0: {
+ int n;
+ sqlite3_context *pCtx;
+
+ assert( pOp->p4type==P4_FUNCDEF );
+ n = pOp->p5;
+ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) );
+ assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) );
+ assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n );
+ pCtx = sqlite3DbMallocRawNN(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*));
+ if( pCtx==0 ) goto no_mem;
+ pCtx->pOut = 0;
+ pCtx->pFunc = pOp->p4.pFunc;
+ pCtx->iOp = (int)(pOp - aOp);
+ pCtx->pVdbe = p;
+ pCtx->isError = 0;
+ pCtx->argc = n;
+ pOp->p4type = P4_FUNCCTX;
+ pOp->p4.pCtx = pCtx;
+ assert( OP_PureFunc == OP_PureFunc0+2 );
+ assert( OP_Function == OP_Function0+2 );
+ pOp->opcode += 2;
+ /* Fall through into OP_Function */
+}
+case OP_PureFunc:
+case OP_Function: {
+ int i;
+ sqlite3_context *pCtx;
+
+ assert( pOp->p4type==P4_FUNCCTX );
+ pCtx = pOp->p4.pCtx;
+
+ /* If this function is inside of a trigger, the register array in aMem[]
+ ** might change from one evaluation to the next. The next block of code
+ ** checks to see if the register array has changed, and if so it
+ ** reinitializes the relavant parts of the sqlite3_context object */
+ pOut = &aMem[pOp->p3];
+ if( pCtx->pOut != pOut ){
+ pCtx->pOut = pOut;
+ for(i=pCtx->argc-1; i>=0; i--) pCtx->argv[i] = &aMem[pOp->p2+i];
+ }
+
+ memAboutToChange(p, pOut);
+#ifdef SQLITE_DEBUG
+ for(i=0; i<pCtx->argc; i++){
+ assert( memIsValid(pCtx->argv[i]) );
+ REGISTER_TRACE(pOp->p2+i, pCtx->argv[i]);
+ }
+#endif
+ MemSetTypeFlag(pOut, MEM_Null);
+ assert( pCtx->isError==0 );
+ (*pCtx->pFunc->xSFunc)(pCtx, pCtx->argc, pCtx->argv);/* IMP: R-24505-23230 */
+
+ /* If the function returned an error, throw an exception */
+ if( pCtx->isError ){
+ if( pCtx->isError>0 ){
+ sqlite3VdbeError(p, "%s", sqlite3_value_text(pOut));
+ rc = pCtx->isError;
+ }
+ sqlite3VdbeDeleteAuxData(db, &p->pAuxData, pCtx->iOp, pOp->p1);
+ pCtx->isError = 0;
+ if( rc ) goto abort_due_to_error;
+ }
+
+ /* Copy the result of the function into register P3 */
+ if( pOut->flags & (MEM_Str|MEM_Blob) ){
+ sqlite3VdbeChangeEncoding(pOut, encoding);
+ if( sqlite3VdbeMemTooBig(pOut) ) goto too_big;
+ }
-/* Opcode: Init * P2 * P4 *
-** Synopsis: Start at P2
+ REGISTER_TRACE(pOp->p3, pOut);
+ UPDATE_MAX_BLOBSIZE(pOut);
+ break;
+}
+
+/* Opcode: Trace P1 P2 * P4 *
+**
+** Write P4 on the statement trace output if statement tracing is
+** enabled.
+**
+** Operand P1 must be 0x7fffffff and P2 must positive.
+*/
+/* Opcode: Init P1 P2 P3 P4 *
+** Synopsis: Start at P2
**
** Programs contain a single instance of this opcode as the very first
** opcode.
** Or if P4 is blank, use the string returned by sqlite3_sql().
**
** If P2 is not zero, jump to instruction P2.
+**
+** Increment the value of P1 so that OP_Once opcodes will jump the
+** first time they are evaluated for this run.
+**
+** If P3 is not zero, then it is an address to jump to if an SQLITE_CORRUPT
+** error is encountered.
*/
+case OP_Trace:
case OP_Init: { /* jump */
+ int i;
+#ifndef SQLITE_OMIT_TRACE
char *zTrace;
- char *z;
+#endif
+
+ /* If the P4 argument is not NULL, then it must be an SQL comment string.
+ ** The "--" string is broken up to prevent false-positives with srcck1.c.
+ **
+ ** This assert() provides evidence for:
+ ** EVIDENCE-OF: R-50676-09860 The callback can compute the same text that
+ ** would have been returned by the legacy sqlite3_trace() interface by
+ ** using the X argument when X begins with "--" and invoking
+ ** sqlite3_expanded_sql(P) otherwise.
+ */
+ assert( pOp->p4.z==0 || strncmp(pOp->p4.z, "-" "- ", 3)==0 );
+
+ /* OP_Init is always instruction 0 */
+ assert( pOp==p->aOp || pOp->opcode==OP_Trace );
#ifndef SQLITE_OMIT_TRACE
- if( db->xTrace
+ if( (db->mTrace & (SQLITE_TRACE_STMT|SQLITE_TRACE_LEGACY))!=0
&& !p->doingRerun
&& (zTrace = (pOp->p4.z ? pOp->p4.z : p->zSql))!=0
){
- z = sqlite3VdbeExpandSql(p, zTrace);
- db->xTrace(db->pTraceArg, z);
- sqlite3DbFree(db, z);
+#ifndef SQLITE_OMIT_DEPRECATED
+ if( db->mTrace & SQLITE_TRACE_LEGACY ){
+ void (*x)(void*,const char*) = (void(*)(void*,const char*))db->xTrace;
+ char *z = sqlite3VdbeExpandSql(p, zTrace);
+ x(db->pTraceArg, z);
+ sqlite3_free(z);
+ }else
+#endif
+ if( db->nVdbeExec>1 ){
+ char *z = sqlite3MPrintf(db, "-- %s", zTrace);
+ (void)db->xTrace(SQLITE_TRACE_STMT, db->pTraceArg, p, z);
+ sqlite3DbFree(db, z);
+ }else{
+ (void)db->xTrace(SQLITE_TRACE_STMT, db->pTraceArg, p, zTrace);
+ }
}
#ifdef SQLITE_USE_FCNTL_TRACE
zTrace = (pOp->p4.z ? pOp->p4.z : p->zSql);
if( zTrace ){
- int i;
- for(i=0; i<db->nDb; i++){
- if( DbMaskTest(p->btreeMask, i)==0 ) continue;
- sqlite3_file_control(db, db->aDb[i].zName, SQLITE_FCNTL_TRACE, zTrace);
+ int j;
+ for(j=0; j<db->nDb; j++){
+ if( DbMaskTest(p->btreeMask, j)==0 ) continue;
+ sqlite3_file_control(db, db->aDb[j].zDbSName, SQLITE_FCNTL_TRACE, zTrace);
}
}
#endif /* SQLITE_USE_FCNTL_TRACE */
}
#endif /* SQLITE_DEBUG */
#endif /* SQLITE_OMIT_TRACE */
- if( pOp->p2 ) goto jump_to_p2;
- break;
+ assert( pOp->p2>0 );
+ if( pOp->p1>=sqlite3GlobalConfig.iOnceResetThreshold ){
+ if( pOp->opcode==OP_Trace ) break;
+ for(i=1; i<p->nOp; i++){
+ if( p->aOp[i].opcode==OP_Once ) p->aOp[i].p1 = 0;
+ }
+ pOp->p1 = 0;
+ }
+ pOp->p1++;
+ p->aCounter[SQLITE_STMTSTATUS_RUN]++;
+ goto jump_to_p2;
}
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+/* Opcode: CursorHint P1 * * P4 *
+**
+** Provide a hint to cursor P1 that it only needs to return rows that
+** satisfy the Expr in P4. TK_REGISTER terms in the P4 expression refer
+** to values currently held in registers. TK_COLUMN terms in the P4
+** expression refer to columns in the b-tree to which cursor P1 is pointing.
+*/
+case OP_CursorHint: {
+ VdbeCursor *pC;
+
+ assert( pOp->p1>=0 && pOp->p1<p->nCursor );
+ assert( pOp->p4type==P4_EXPR );
+ pC = p->apCsr[pOp->p1];
+ if( pC ){
+ assert( pC->eCurType==CURTYPE_BTREE );
+ sqlite3BtreeCursorHint(pC->uc.pCursor, BTREE_HINT_RANGE,
+ pOp->p4.pExpr, aMem);
+ }
+ break;
+}
+#endif /* SQLITE_ENABLE_CURSOR_HINTS */
/* Opcode: Noop * * * * *
**
#ifdef VDBE_PROFILE
{
- u64 endTime = sqlite3Hwtime();
+ u64 endTime = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime();
if( endTime>start ) pOrigOp->cycles += endTime - start;
pOrigOp->cnt++;
}
#ifdef SQLITE_DEBUG
if( db->flags & SQLITE_VdbeTrace ){
+ u8 opProperty = sqlite3OpcodeProperty[pOrigOp->opcode];
if( rc!=0 ) printf("rc=%d\n",rc);
- if( pOrigOp->opflags & (OPFLG_OUT2) ){
+ if( opProperty & (OPFLG_OUT2) ){
registerTrace(pOrigOp->p2, &aMem[pOrigOp->p2]);
}
- if( pOrigOp->opflags & OPFLG_OUT3 ){
+ if( opProperty & OPFLG_OUT3 ){
registerTrace(pOrigOp->p3, &aMem[pOrigOp->p3]);
}
}
/* If we reach this point, it means that execution is finished with
** an error of some kind.
*/
-vdbe_error_halt:
+abort_due_to_error:
+ if( db->mallocFailed ) rc = SQLITE_NOMEM_BKPT;
assert( rc );
+ if( p->zErrMsg==0 && rc!=SQLITE_IOERR_NOMEM ){
+ sqlite3VdbeError(p, "%s", sqlite3ErrStr(rc));
+ }
p->rc = rc;
+ sqlite3SystemError(db, rc);
testcase( sqlite3GlobalConfig.xLog!=0 );
sqlite3_log(rc, "statement aborts at %d: [%s] %s",
(int)(pOp - aOp), p->zSql, p->zErrMsg);
sqlite3VdbeHalt(p);
- if( rc==SQLITE_IOERR_NOMEM ) db->mallocFailed = 1;
+ if( rc==SQLITE_IOERR_NOMEM ) sqlite3OomFault(db);
rc = SQLITE_ERROR;
if( resetSchemaOnFault>0 ){
sqlite3ResetOneSchema(db, resetSchemaOnFault-1);
** release the mutexes on btrees that were acquired at the
** top. */
vdbe_return:
- db->lastRowid = lastRowid;
testcase( nVmStep>0 );
p->aCounter[SQLITE_STMTSTATUS_VM_STEP] += (int)nVmStep;
sqlite3VdbeLeave(p);
+ assert( rc!=SQLITE_OK || nExtraDelete==0
+ || sqlite3_strlike("DELETE%",p->zSql,0)!=0
+ );
return rc;
/* Jump to here if a string or blob larger than SQLITE_MAX_LENGTH
too_big:
sqlite3VdbeError(p, "string or blob too big");
rc = SQLITE_TOOBIG;
- goto vdbe_error_halt;
+ goto abort_due_to_error;
/* Jump to here if a malloc() fails.
*/
no_mem:
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
sqlite3VdbeError(p, "out of memory");
- rc = SQLITE_NOMEM;
- goto vdbe_error_halt;
-
- /* Jump to here for any other kind of fatal error. The "rc" variable
- ** should hold the error number.
- */
-abort_due_to_error:
- assert( p->zErrMsg==0 );
- if( db->mallocFailed ) rc = SQLITE_NOMEM;
- if( rc!=SQLITE_IOERR_NOMEM ){
- sqlite3VdbeError(p, "%s", sqlite3ErrStr(rc));
- }
- goto vdbe_error_halt;
+ rc = SQLITE_NOMEM_BKPT;
+ goto abort_due_to_error;
/* Jump to here if the sqlite3_interrupt() API sets the interrupt
** flag.
*/
abort_due_to_interrupt:
assert( db->u1.isInterrupted );
- rc = SQLITE_INTERRUPT;
+ rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_INTERRUPT;
p->rc = rc;
sqlite3VdbeError(p, "%s", sqlite3ErrStr(rc));
- goto vdbe_error_halt;
+ goto abort_due_to_error;
}
*/
typedef struct Incrblob Incrblob;
struct Incrblob {
- int flags; /* Copy of "flags" passed to sqlite3_blob_open() */
int nByte; /* Size of open blob, in bytes */
int iOffset; /* Byte offset of blob in cursor data */
- int iCol; /* Table column this handle is open on */
+ u16 iCol; /* Table column this handle is open on */
BtCursor *pCsr; /* Cursor pointing at blob row */
sqlite3_stmt *pStmt; /* Statement holding cursor open */
sqlite3 *db; /* The associated database */
+ char *zDb; /* Database name */
+ Table *pTab; /* Table object */
};
char *zErr = 0; /* Error message */
Vdbe *v = (Vdbe *)p->pStmt;
- /* Set the value of the SQL statements only variable to integer iRow.
- ** This is done directly instead of using sqlite3_bind_int64() to avoid
- ** triggering asserts related to mutexes.
+ /* Set the value of register r[1] in the SQL statement to integer iRow.
+ ** This is done directly as a performance optimization
*/
- assert( v->aVar[0].flags&MEM_Int );
- v->aVar[0].u.i = iRow;
+ v->aMem[1].flags = MEM_Int;
+ v->aMem[1].u.i = iRow;
- rc = sqlite3_step(p->pStmt);
+ /* If the statement has been run before (and is paused at the OP_ResultRow)
+ ** then back it up to the point where it does the OP_NotExists. This could
+ ** have been down with an extra OP_Goto, but simply setting the program
+ ** counter is faster. */
+ if( v->pc>4 ){
+ v->pc = 4;
+ assert( v->aOp[v->pc].opcode==OP_NotExists );
+ rc = sqlite3VdbeExec(v);
+ }else{
+ rc = sqlite3_step(p->pStmt);
+ }
if( rc==SQLITE_ROW ){
VdbeCursor *pC = v->apCsr[0];
- u32 type = pC->aType[p->iCol];
+ u32 type = pC->nHdrParsed>p->iCol ? pC->aType[p->iCol] : 0;
+ testcase( pC->nHdrParsed==p->iCol );
+ testcase( pC->nHdrParsed==p->iCol+1 );
if( type<12 ){
zErr = sqlite3MPrintf(p->db, "cannot open value of type %s",
type==0?"null": type==7?"real": "integer"
}else{
p->iOffset = pC->aType[p->iCol + pC->nField];
p->nByte = sqlite3VdbeSerialTypeLen(type);
- p->pCsr = pC->pCursor;
+ p->pCsr = pC->uc.pCursor;
sqlite3BtreeIncrblobCursor(p->pCsr);
}
}
/*
** Open a blob handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
sqlite3* db, /* The database connection */
const char *zDb, /* The attached database containing the blob */
const char *zTable, /* The table containing the blob */
const char *zColumn, /* The column containing the blob */
sqlite_int64 iRow, /* The row containing the glob */
- int flags, /* True -> read/write access, false -> read-only */
+ int wrFlag, /* True -> read/write access, false -> read-only */
sqlite3_blob **ppBlob /* Handle for accessing the blob returned here */
){
int nAttempt = 0;
int iCol; /* Index of zColumn in row-record */
-
- /* This VDBE program seeks a btree cursor to the identified
- ** db/table/row entry. The reason for using a vdbe program instead
- ** of writing code to use the b-tree layer directly is that the
- ** vdbe program will take advantage of the various transaction,
- ** locking and error handling infrastructure built into the vdbe.
- **
- ** After seeking the cursor, the vdbe executes an OP_ResultRow.
- ** Code external to the Vdbe then "borrows" the b-tree cursor and
- ** uses it to implement the blob_read(), blob_write() and
- ** blob_bytes() functions.
- **
- ** The sqlite3_blob_close() function finalizes the vdbe program,
- ** which closes the b-tree cursor and (possibly) commits the
- ** transaction.
- */
- static const int iLn = VDBE_OFFSET_LINENO(4);
- static const VdbeOpList openBlob[] = {
- /* {OP_Transaction, 0, 0, 0}, // 0: Inserted separately */
- {OP_TableLock, 0, 0, 0}, /* 1: Acquire a read or write lock */
- /* One of the following two instructions is replaced by an OP_Noop. */
- {OP_OpenRead, 0, 0, 0}, /* 2: Open cursor 0 for reading */
- {OP_OpenWrite, 0, 0, 0}, /* 3: Open cursor 0 for read/write */
- {OP_Variable, 1, 1, 1}, /* 4: Push the rowid to the stack */
- {OP_NotExists, 0, 10, 1}, /* 5: Seek the cursor */
- {OP_Column, 0, 0, 1}, /* 6 */
- {OP_ResultRow, 1, 0, 0}, /* 7 */
- {OP_Goto, 0, 4, 0}, /* 8 */
- {OP_Close, 0, 0, 0}, /* 9 */
- {OP_Halt, 0, 0, 0}, /* 10 */
- };
-
int rc = SQLITE_OK;
char *zErr = 0;
Table *pTab;
- Parse *pParse = 0;
Incrblob *pBlob = 0;
+ Parse sParse;
#ifdef SQLITE_ENABLE_API_ARMOR
if( ppBlob==0 ){
return SQLITE_MISUSE_BKPT;
}
#endif
- flags = !!flags; /* flags = (flags ? 1 : 0); */
+ wrFlag = !!wrFlag; /* wrFlag = (wrFlag ? 1 : 0); */
sqlite3_mutex_enter(db->mutex);
pBlob = (Incrblob *)sqlite3DbMallocZero(db, sizeof(Incrblob));
- if( !pBlob ) goto blob_open_out;
- pParse = sqlite3StackAllocRaw(db, sizeof(*pParse));
- if( !pParse ) goto blob_open_out;
-
do {
- memset(pParse, 0, sizeof(Parse));
- pParse->db = db;
+ memset(&sParse, 0, sizeof(Parse));
+ if( !pBlob ) goto blob_open_out;
+ sParse.db = db;
sqlite3DbFree(db, zErr);
zErr = 0;
sqlite3BtreeEnterAll(db);
- pTab = sqlite3LocateTable(pParse, 0, zTable, zDb);
+ pTab = sqlite3LocateTable(&sParse, 0, zTable, zDb);
if( pTab && IsVirtual(pTab) ){
pTab = 0;
- sqlite3ErrorMsg(pParse, "cannot open virtual table: %s", zTable);
+ sqlite3ErrorMsg(&sParse, "cannot open virtual table: %s", zTable);
}
if( pTab && !HasRowid(pTab) ){
pTab = 0;
- sqlite3ErrorMsg(pParse, "cannot open table without rowid: %s", zTable);
+ sqlite3ErrorMsg(&sParse, "cannot open table without rowid: %s", zTable);
}
#ifndef SQLITE_OMIT_VIEW
if( pTab && pTab->pSelect ){
pTab = 0;
- sqlite3ErrorMsg(pParse, "cannot open view: %s", zTable);
+ sqlite3ErrorMsg(&sParse, "cannot open view: %s", zTable);
}
#endif
if( !pTab ){
- if( pParse->zErrMsg ){
+ if( sParse.zErrMsg ){
sqlite3DbFree(db, zErr);
- zErr = pParse->zErrMsg;
- pParse->zErrMsg = 0;
+ zErr = sParse.zErrMsg;
+ sParse.zErrMsg = 0;
}
rc = SQLITE_ERROR;
sqlite3BtreeLeaveAll(db);
goto blob_open_out;
}
+ pBlob->pTab = pTab;
+ pBlob->zDb = db->aDb[sqlite3SchemaToIndex(db, pTab->pSchema)].zDbSName;
/* Now search pTab for the exact column. */
for(iCol=0; iCol<pTab->nCol; iCol++) {
/* If the value is being opened for writing, check that the
** column is not indexed, and that it is not part of a foreign key.
- ** It is against the rules to open a column to which either of these
- ** descriptions applies for writing. */
- if( flags ){
+ */
+ if( wrFlag ){
const char *zFault = 0;
Index *pIdx;
#ifndef SQLITE_OMIT_FOREIGN_KEY
}
}
- pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(pParse);
+ pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(&sParse);
assert( pBlob->pStmt || db->mallocFailed );
if( pBlob->pStmt ){
+
+ /* This VDBE program seeks a btree cursor to the identified
+ ** db/table/row entry. The reason for using a vdbe program instead
+ ** of writing code to use the b-tree layer directly is that the
+ ** vdbe program will take advantage of the various transaction,
+ ** locking and error handling infrastructure built into the vdbe.
+ **
+ ** After seeking the cursor, the vdbe executes an OP_ResultRow.
+ ** Code external to the Vdbe then "borrows" the b-tree cursor and
+ ** uses it to implement the blob_read(), blob_write() and
+ ** blob_bytes() functions.
+ **
+ ** The sqlite3_blob_close() function finalizes the vdbe program,
+ ** which closes the b-tree cursor and (possibly) commits the
+ ** transaction.
+ */
+ static const int iLn = VDBE_OFFSET_LINENO(2);
+ static const VdbeOpList openBlob[] = {
+ {OP_TableLock, 0, 0, 0}, /* 0: Acquire a read or write lock */
+ {OP_OpenRead, 0, 0, 0}, /* 1: Open a cursor */
+ /* blobSeekToRow() will initialize r[1] to the desired rowid */
+ {OP_NotExists, 0, 5, 1}, /* 2: Seek the cursor to rowid=r[1] */
+ {OP_Column, 0, 0, 1}, /* 3 */
+ {OP_ResultRow, 1, 0, 0}, /* 4 */
+ {OP_Halt, 0, 0, 0}, /* 5 */
+ };
Vdbe *v = (Vdbe *)pBlob->pStmt;
int iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
+ VdbeOp *aOp;
-
- sqlite3VdbeAddOp4Int(v, OP_Transaction, iDb, flags,
+ sqlite3VdbeAddOp4Int(v, OP_Transaction, iDb, wrFlag,
pTab->pSchema->schema_cookie,
pTab->pSchema->iGeneration);
- sqlite3VdbeChangeP5(v, 1);
- sqlite3VdbeAddOpList(v, ArraySize(openBlob), openBlob, iLn);
+ sqlite3VdbeChangeP5(v, 1);
+ assert( sqlite3VdbeCurrentAddr(v)==2 || db->mallocFailed );
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(openBlob), openBlob, iLn);
/* Make sure a mutex is held on the table to be accessed */
sqlite3VdbeUsesBtree(v, iDb);
- /* Configure the OP_TableLock instruction */
+ if( db->mallocFailed==0 ){
+ assert( aOp!=0 );
+ /* Configure the OP_TableLock instruction */
#ifdef SQLITE_OMIT_SHARED_CACHE
- sqlite3VdbeChangeToNoop(v, 1);
+ aOp[0].opcode = OP_Noop;
#else
- sqlite3VdbeChangeP1(v, 1, iDb);
- sqlite3VdbeChangeP2(v, 1, pTab->tnum);
- sqlite3VdbeChangeP3(v, 1, flags);
- sqlite3VdbeChangeP4(v, 1, pTab->zName, P4_TRANSIENT);
-#endif
-
- /* Remove either the OP_OpenWrite or OpenRead. Set the P2
- ** parameter of the other to pTab->tnum. */
- sqlite3VdbeChangeToNoop(v, 3 - flags);
- sqlite3VdbeChangeP2(v, 2 + flags, pTab->tnum);
- sqlite3VdbeChangeP3(v, 2 + flags, iDb);
-
- /* Configure the number of columns. Configure the cursor to
- ** think that the table has one more column than it really
- ** does. An OP_Column to retrieve this imaginary column will
- ** always return an SQL NULL. This is useful because it means
- ** we can invoke OP_Column to fill in the vdbe cursors type
- ** and offset cache without causing any IO.
- */
- sqlite3VdbeChangeP4(v, 2+flags, SQLITE_INT_TO_PTR(pTab->nCol+1),P4_INT32);
- sqlite3VdbeChangeP2(v, 6, pTab->nCol);
- if( !db->mallocFailed ){
- pParse->nVar = 1;
- pParse->nMem = 1;
- pParse->nTab = 1;
- sqlite3VdbeMakeReady(v, pParse);
+ aOp[0].p1 = iDb;
+ aOp[0].p2 = pTab->tnum;
+ aOp[0].p3 = wrFlag;
+ sqlite3VdbeChangeP4(v, 2, pTab->zName, P4_TRANSIENT);
+ }
+ if( db->mallocFailed==0 ){
+#endif
+
+ /* Remove either the OP_OpenWrite or OpenRead. Set the P2
+ ** parameter of the other to pTab->tnum. */
+ if( wrFlag ) aOp[1].opcode = OP_OpenWrite;
+ aOp[1].p2 = pTab->tnum;
+ aOp[1].p3 = iDb;
+
+ /* Configure the number of columns. Configure the cursor to
+ ** think that the table has one more column than it really
+ ** does. An OP_Column to retrieve this imaginary column will
+ ** always return an SQL NULL. This is useful because it means
+ ** we can invoke OP_Column to fill in the vdbe cursors type
+ ** and offset cache without causing any IO.
+ */
+ aOp[1].p4type = P4_INT32;
+ aOp[1].p4.i = pTab->nCol+1;
+ aOp[3].p2 = pTab->nCol;
+
+ sParse.nVar = 0;
+ sParse.nMem = 1;
+ sParse.nTab = 1;
+ sqlite3VdbeMakeReady(v, &sParse);
}
}
- pBlob->flags = flags;
pBlob->iCol = iCol;
pBlob->db = db;
sqlite3BtreeLeaveAll(db);
if( db->mallocFailed ){
goto blob_open_out;
}
- sqlite3_bind_int64(pBlob->pStmt, 1, iRow);
rc = blobSeekToRow(pBlob, iRow, &zErr);
} while( (++nAttempt)<SQLITE_MAX_SCHEMA_RETRY && rc==SQLITE_SCHEMA );
}
sqlite3ErrorWithMsg(db, rc, (zErr ? "%s" : 0), zErr);
sqlite3DbFree(db, zErr);
- sqlite3ParserReset(pParse);
- sqlite3StackFree(db, pParse);
+ sqlite3ParserReset(&sParse);
rc = sqlite3ApiExit(db, rc);
sqlite3_mutex_leave(db->mutex);
return rc;
** Close a blob handle that was previously created using
** sqlite3_blob_open().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *pBlob){
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *pBlob){
Incrblob *p = (Incrblob *)pBlob;
int rc;
sqlite3 *db;
*/
assert( db == v->db );
sqlite3BtreeEnterCursor(p->pCsr);
+
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ if( xCall==sqlite3BtreePutData && db->xPreUpdateCallback ){
+ /* If a pre-update hook is registered and this is a write cursor,
+ ** invoke it here.
+ **
+ ** TODO: The preupdate-hook is passed SQLITE_DELETE, even though this
+ ** operation should really be an SQLITE_UPDATE. This is probably
+ ** incorrect, but is convenient because at this point the new.* values
+ ** are not easily obtainable. And for the sessions module, an
+ ** SQLITE_UPDATE where the PK columns do not change is handled in the
+ ** same way as an SQLITE_DELETE (the SQLITE_DELETE code is actually
+ ** slightly more efficient). Since you cannot write to a PK column
+ ** using the incremental-blob API, this works. For the sessions module
+ ** anyhow.
+ */
+ sqlite3_int64 iKey;
+ iKey = sqlite3BtreeIntegerKey(p->pCsr);
+ sqlite3VdbePreUpdateHook(
+ v, v->apCsr[0], SQLITE_DELETE, p->zDb, p->pTab, iKey, -1
+ );
+ }
+#endif
+
rc = xCall(p->pCsr, iOffset+p->iOffset, n, z);
sqlite3BtreeLeaveCursor(p->pCsr);
if( rc==SQLITE_ABORT ){
/*
** Read data from a blob handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){
- return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreeData);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *pBlob, void *z, int n, int iOffset){
+ return blobReadWrite(pBlob, z, n, iOffset, sqlite3BtreePayloadChecked);
}
/*
** Write data to a blob handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *pBlob, const void *z, int n, int iOffset){
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *pBlob, const void *z, int n, int iOffset){
return blobReadWrite(pBlob, (void *)z, n, iOffset, sqlite3BtreePutData);
}
** The Incrblob.nByte field is fixed for the lifetime of the Incrblob
** so no mutex is required for access.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *pBlob){
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *pBlob){
Incrblob *p = (Incrblob *)pBlob;
return (p && p->pStmt) ? p->nByte : 0;
}
** subsequent calls to sqlite3_blob_xxx() functions (except blob_close())
** immediately return SQLITE_ABORT.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *pBlob, sqlite3_int64 iRow){
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *pBlob, sqlite3_int64 iRow){
int rc;
Incrblob *p = (Incrblob *)pBlob;
sqlite3 *db;
int nNew = MAX(128, p->nAlloc*2);
while( nByte>nNew ) nNew = nNew*2;
aNew = sqlite3Realloc(p->aAlloc, nNew);
- if( !aNew ) return SQLITE_NOMEM;
+ if( !aNew ) return SQLITE_NOMEM_BKPT;
p->nAlloc = nNew;
p->aAlloc = aNew;
}
int iBuf = pReadr->iReadOff % pgsz;
if( pReadr->aBuffer==0 ){
pReadr->aBuffer = (u8*)sqlite3Malloc(pgsz);
- if( pReadr->aBuffer==0 ) rc = SQLITE_NOMEM;
+ if( pReadr->aBuffer==0 ) rc = SQLITE_NOMEM_BKPT;
pReadr->nBuffer = pgsz;
}
if( rc==SQLITE_OK && iBuf ){
rc = vdbePmaReaderSeek(pTask, pReadr, pFile, iStart);
if( rc==SQLITE_OK ){
- u64 nByte; /* Size of PMA in bytes */
+ u64 nByte = 0; /* Size of PMA in bytes */
rc = vdbePmaReadVarint(pReadr, &nByte);
pReadr->iEof = pReadr->iReadOff + nByte;
*pnByte += nByte;
int n2;
int res;
- getVarint32(&p1[1], n1); n1 = (n1 - 13) / 2;
- getVarint32(&p2[1], n2); n2 = (n2 - 13) / 2;
- res = memcmp(v1, v2, MIN(n1, n2));
+ getVarint32(&p1[1], n1);
+ getVarint32(&p2[1], n2);
+ res = memcmp(v1, v2, (MIN(n1, n2) - 13)/2);
if( res==0 ){
res = n1 - n2;
}
if( res==0 ){
- if( pTask->pSorter->pKeyInfo->nField>1 ){
+ if( pTask->pSorter->pKeyInfo->nKeyField>1 ){
res = vdbeSorterCompareTail(
pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2
);
assert( (s1>0 && s1<7) || s1==8 || s1==9 );
assert( (s2>0 && s2<7) || s2==8 || s2==9 );
- if( s1>7 && s2>7 ){
- res = s1 - s2;
- }else{
- if( s1==s2 ){
- if( (*v1 ^ *v2) & 0x80 ){
- /* The two values have different signs */
- res = (*v1 & 0x80) ? -1 : +1;
- }else{
- /* The two values have the same sign. Compare using memcmp(). */
- static const u8 aLen[] = {0, 1, 2, 3, 4, 6, 8 };
- int i;
- res = 0;
- for(i=0; i<aLen[s1]; i++){
- if( (res = v1[i] - v2[i]) ) break;
+ if( s1==s2 ){
+ /* The two values have the same sign. Compare using memcmp(). */
+ static const u8 aLen[] = {0, 1, 2, 3, 4, 6, 8, 0, 0, 0 };
+ const u8 n = aLen[s1];
+ int i;
+ res = 0;
+ for(i=0; i<n; i++){
+ if( (res = v1[i] - v2[i])!=0 ){
+ if( ((v1[0] ^ v2[0]) & 0x80)!=0 ){
+ res = v1[0] & 0x80 ? -1 : +1;
}
+ break;
}
+ }
+ }else if( s1>7 && s2>7 ){
+ res = s1 - s2;
+ }else{
+ if( s2>7 ){
+ res = +1;
+ }else if( s1>7 ){
+ res = -1;
}else{
- if( s2>7 ){
- res = +1;
- }else if( s1>7 ){
- res = -1;
- }else{
- res = s1 - s2;
- }
- assert( res!=0 );
+ res = s1 - s2;
+ }
+ assert( res!=0 );
- if( res>0 ){
- if( *v1 & 0x80 ) res = -1;
- }else{
- if( *v2 & 0x80 ) res = +1;
- }
+ if( res>0 ){
+ if( *v1 & 0x80 ) res = -1;
+ }else{
+ if( *v2 & 0x80 ) res = +1;
}
}
if( res==0 ){
- if( pTask->pSorter->pKeyInfo->nField>1 ){
+ if( pTask->pSorter->pKeyInfo->nKeyField>1 ){
res = vdbeSorterCompareTail(
pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2
);
/*
** Initialize the temporary index cursor just opened as a sorter cursor.
**
-** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nField)
+** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nKeyField)
** to determine the number of fields that should be compared from the
** records being sorted. However, if the value passed as argument nField
** is non-zero and the sorter is able to guarantee a stable sort, nField
){
int pgsz; /* Page size of main database */
int i; /* Used to iterate through aTask[] */
- int mxCache; /* Cache size */
VdbeSorter *pSorter; /* The new sorter */
KeyInfo *pKeyInfo; /* Copy of pCsr->pKeyInfo with db==0 */
int szKeyInfo; /* Size of pCsr->pKeyInfo in bytes */
}
#endif
- assert( pCsr->pKeyInfo && pCsr->pBt==0 );
- szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nField-1)*sizeof(CollSeq*);
+ assert( pCsr->pKeyInfo && pCsr->pBtx==0 );
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nKeyField-1)*sizeof(CollSeq*);
sz = sizeof(VdbeSorter) + nWorker * sizeof(SortSubtask);
pSorter = (VdbeSorter*)sqlite3DbMallocZero(db, sz + szKeyInfo);
- pCsr->pSorter = pSorter;
+ pCsr->uc.pSorter = pSorter;
if( pSorter==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
pSorter->pKeyInfo = pKeyInfo = (KeyInfo*)((u8*)pSorter + sz);
memcpy(pKeyInfo, pCsr->pKeyInfo, szKeyInfo);
pKeyInfo->db = 0;
if( nField && nWorker==0 ){
- pKeyInfo->nXField += (pKeyInfo->nField - nField);
- pKeyInfo->nField = nField;
+ pKeyInfo->nKeyField = nField;
}
pSorter->pgsz = pgsz = sqlite3BtreeGetPageSize(db->aDb[0].pBt);
pSorter->nTask = nWorker + 1;
- pSorter->iPrev = nWorker-1;
+ pSorter->iPrev = (u8)(nWorker - 1);
pSorter->bUseThreads = (pSorter->nTask>1);
pSorter->db = db;
for(i=0; i<pSorter->nTask; i++){
}
if( !sqlite3TempInMemory(db) ){
+ i64 mxCache; /* Cache size in bytes*/
u32 szPma = sqlite3GlobalConfig.szPma;
pSorter->mnPmaSize = szPma * pgsz;
+
mxCache = db->aDb[0].pSchema->cache_size;
- if( mxCache<(int)szPma ) mxCache = (int)szPma;
- pSorter->mxPmaSize = MIN((i64)mxCache*pgsz, SQLITE_MAX_PMASZ);
+ if( mxCache<0 ){
+ /* A negative cache-size value C indicates that the cache is abs(C)
+ ** KiB in size. */
+ mxCache = mxCache * -1024;
+ }else{
+ mxCache = mxCache * pgsz;
+ }
+ mxCache = MIN(mxCache, SQLITE_MAX_PMASZ);
+ pSorter->mxPmaSize = MAX(pSorter->mnPmaSize, (int)mxCache);
- /* EVIDENCE-OF: R-26747-61719 When the application provides any amount of
- ** scratch memory using SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary
- ** large heap allocations.
- */
- if( sqlite3GlobalConfig.pScratch==0 ){
+ /* Avoid large memory allocations if the application has requested
+ ** SQLITE_CONFIG_SMALL_MALLOC. */
+ if( sqlite3GlobalConfig.bSmallMalloc==0 ){
assert( pSorter->iMemory==0 );
pSorter->nMemory = pgsz;
pSorter->list.aMemory = (u8*)sqlite3Malloc(pgsz);
- if( !pSorter->list.aMemory ) rc = SQLITE_NOMEM;
+ if( !pSorter->list.aMemory ) rc = SQLITE_NOMEM_BKPT;
}
}
- if( (pKeyInfo->nField+pKeyInfo->nXField)<13
+ if( pKeyInfo->nAllField<13
&& (pKeyInfo->aColl[0]==0 || pKeyInfo->aColl[0]==db->pDfltColl)
){
pSorter->typeMask = SORTER_TYPE_INTEGER | SORTER_TYPE_TEXT;
** Free any cursor components allocated by sqlite3VdbeSorterXXX routines.
*/
SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *db, VdbeCursor *pCsr){
- VdbeSorter *pSorter = pCsr->pSorter;
+ VdbeSorter *pSorter;
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
if( pSorter ){
sqlite3VdbeSorterReset(db, pSorter);
sqlite3_free(pSorter->list.aMemory);
sqlite3DbFree(db, pSorter);
- pCsr->pSorter = 0;
+ pCsr->uc.pSorter = 0;
}
}
*/
static int vdbeSortAllocUnpacked(SortSubtask *pTask){
if( pTask->pUnpacked==0 ){
- char *pFree;
- pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord(
- pTask->pSorter->pKeyInfo, 0, 0, &pFree
- );
- assert( pTask->pUnpacked==(UnpackedRecord*)pFree );
- if( pFree==0 ) return SQLITE_NOMEM;
- pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nField;
+ pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pTask->pSorter->pKeyInfo);
+ if( pTask->pUnpacked==0 ) return SQLITE_NOMEM_BKPT;
+ pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nKeyField;
pTask->pUnpacked->errCode = 0;
}
return SQLITE_OK;
/*
** Merge the two sorted lists p1 and p2 into a single list.
-** Set *ppOut to the head of the new list.
*/
-static void vdbeSorterMerge(
+static SorterRecord *vdbeSorterMerge(
SortSubtask *pTask, /* Calling thread context */
SorterRecord *p1, /* First list to merge */
- SorterRecord *p2, /* Second list to merge */
- SorterRecord **ppOut /* OUT: Head of merged list */
+ SorterRecord *p2 /* Second list to merge */
){
SorterRecord *pFinal = 0;
SorterRecord **pp = &pFinal;
int bCached = 0;
- while( p1 && p2 ){
+ assert( p1!=0 && p2!=0 );
+ for(;;){
int res;
res = pTask->xCompare(
pTask, &bCached, SRVAL(p1), p1->nVal, SRVAL(p2), p2->nVal
*pp = p1;
pp = &p1->u.pNext;
p1 = p1->u.pNext;
+ if( p1==0 ){
+ *pp = p2;
+ break;
+ }
}else{
*pp = p2;
pp = &p2->u.pNext;
p2 = p2->u.pNext;
bCached = 0;
+ if( p2==0 ){
+ *pp = p1;
+ break;
+ }
}
}
- *pp = p1 ? p1 : p2;
- *ppOut = pFinal;
+ return pFinal;
}
/*
aSlot = (SorterRecord **)sqlite3MallocZero(64 * sizeof(SorterRecord *));
if( !aSlot ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
while( p ){
p->u.pNext = 0;
for(i=0; aSlot[i]; i++){
- vdbeSorterMerge(pTask, p, aSlot[i], &p);
+ p = vdbeSorterMerge(pTask, p, aSlot[i]);
aSlot[i] = 0;
}
aSlot[i] = p;
p = 0;
for(i=0; i<64; i++){
- vdbeSorterMerge(pTask, p, aSlot[i], &p);
+ if( aSlot[i]==0 ) continue;
+ p = p ? vdbeSorterMerge(pTask, p, aSlot[i]) : aSlot[i];
}
pList->pList = p;
memset(p, 0, sizeof(PmaWriter));
p->aBuffer = (u8*)sqlite3Malloc(nBuf);
if( !p->aBuffer ){
- p->eFWErr = SQLITE_NOMEM;
+ p->eFWErr = SQLITE_NOMEM_BKPT;
}else{
p->iBufEnd = p->iBufStart = (iStart % nBuf);
p->iWriteOff = iStart - p->iBufStart;
pSorter->nMemory = sqlite3MallocSize(aMem);
}else if( pSorter->list.aMemory ){
pSorter->list.aMemory = sqlite3Malloc(pSorter->nMemory);
- if( !pSorter->list.aMemory ) return SQLITE_NOMEM;
+ if( !pSorter->list.aMemory ) return SQLITE_NOMEM_BKPT;
}
rc = vdbeSorterCreateThread(pTask, vdbeSorterFlushThread, pCtx);
const VdbeCursor *pCsr, /* Sorter cursor */
Mem *pVal /* Memory cell containing record */
){
- VdbeSorter *pSorter = pCsr->pSorter;
+ VdbeSorter *pSorter;
int rc = SQLITE_OK; /* Return Code */
SorterRecord *pNew; /* New list element */
-
int bFlush; /* True to flush contents of memory to PMA */
int nReq; /* Bytes of memory required */
int nPMA; /* Bytes of PMA space required */
int t; /* serial type of first record field */
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
getVarint32((const u8*)&pVal->z[1], t);
if( t>0 && t<10 && t!=7 ){
pSorter->typeMask &= SORTER_TYPE_INTEGER;
if( nMin>pSorter->nMemory ){
u8 *aNew;
+ int iListOff = (u8*)pSorter->list.pList - pSorter->list.aMemory;
int nNew = pSorter->nMemory * 2;
while( nNew < nMin ) nNew = nNew*2;
if( nNew > pSorter->mxPmaSize ) nNew = pSorter->mxPmaSize;
if( nNew < nMin ) nNew = nMin;
aNew = sqlite3Realloc(pSorter->list.aMemory, nNew);
- if( !aNew ) return SQLITE_NOMEM;
- pSorter->list.pList = (SorterRecord*)(
- aNew + ((u8*)pSorter->list.pList - pSorter->list.aMemory)
- );
+ if( !aNew ) return SQLITE_NOMEM_BKPT;
+ pSorter->list.pList = (SorterRecord*)&aNew[iListOff];
pSorter->list.aMemory = aNew;
pSorter->nMemory = nNew;
}
pNew = (SorterRecord*)&pSorter->list.aMemory[pSorter->iMemory];
pSorter->iMemory += ROUND8(nReq);
- pNew->u.iNext = (int)((u8*)(pSorter->list.pList) - pSorter->list.aMemory);
+ if( pSorter->list.pList ){
+ pNew->u.iNext = (int)((u8*)(pSorter->list.pList) - pSorter->list.aMemory);
+ }
}else{
pNew = (SorterRecord *)sqlite3Malloc(nReq);
if( pNew==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pNew->u.pNext = pSorter->list.pList;
}
pTask->file2.iEof += pIncr->mxSz;
}else{
vdbeMergeEngineFree(pMerger);
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
return rc;
}
int rc = SQLITE_OK;
*ppOut = pNew = vdbeMergeEngineNew(nPMA);
- if( pNew==0 ) rc = SQLITE_NOMEM;
+ if( pNew==0 ) rc = SQLITE_NOMEM_BKPT;
for(i=0; i<nPMA && rc==SQLITE_OK; i++){
- i64 nDummy;
+ i64 nDummy = 0;
PmaReader *pReadr = &pNew->aReadr[i];
rc = vdbePmaReaderInit(pTask, &pTask->file, iOff, pReadr, &nDummy);
iOff = pReadr->iEof;
if( pReadr->pIncr==0 ){
MergeEngine *pNew = vdbeMergeEngineNew(SORTER_MAX_MERGE_COUNT);
if( pNew==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
rc = vdbeIncrMergerNew(pTask, pNew, &pReadr->pIncr);
}
assert( pSorter->bUseThreads || pSorter->nTask==1 );
if( pSorter->nTask>1 ){
pMain = vdbeMergeEngineNew(pSorter->nTask);
- if( pMain==0 ) rc = SQLITE_NOMEM;
+ if( pMain==0 ) rc = SQLITE_NOMEM_BKPT;
}
#endif
int i;
int iSeq = 0;
pRoot = vdbeMergeEngineNew(SORTER_MAX_MERGE_COUNT);
- if( pRoot==0 ) rc = SQLITE_NOMEM;
+ if( pRoot==0 ) rc = SQLITE_NOMEM_BKPT;
for(i=0; i<pTask->nPMA && rc==SQLITE_OK; i += SORTER_MAX_MERGE_COUNT){
MergeEngine *pMerger = 0; /* New level-0 PMA merger */
int nReader; /* Number of level-0 PMAs to merge */
if( rc==SQLITE_OK ){
pReadr = (PmaReader*)sqlite3DbMallocZero(db, sizeof(PmaReader));
pSorter->pReader = pReadr;
- if( pReadr==0 ) rc = SQLITE_NOMEM;
+ if( pReadr==0 ) rc = SQLITE_NOMEM_BKPT;
}
if( rc==SQLITE_OK ){
rc = vdbeIncrMergerNew(pLast, pMain, &pReadr->pIncr);
** in sorted order.
*/
SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *pCsr, int *pbEof){
- VdbeSorter *pSorter = pCsr->pSorter;
+ VdbeSorter *pSorter;
int rc = SQLITE_OK; /* Return code */
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
assert( pSorter );
/* If no data has been written to disk, then do not do so now. Instead,
}
/*
-** Advance to the next element in the sorter.
+** Advance to the next element in the sorter. Return value:
+**
+** SQLITE_OK success
+** SQLITE_DONE end of data
+** otherwise some kind of error.
*/
-SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr, int *pbEof){
- VdbeSorter *pSorter = pCsr->pSorter;
+SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr){
+ VdbeSorter *pSorter;
int rc; /* Return code */
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
assert( pSorter->bUsePMA || (pSorter->pReader==0 && pSorter->pMerger==0) );
if( pSorter->bUsePMA ){
assert( pSorter->pReader==0 || pSorter->pMerger==0 );
#if SQLITE_MAX_WORKER_THREADS>0
if( pSorter->bUseThreads ){
rc = vdbePmaReaderNext(pSorter->pReader);
- *pbEof = (pSorter->pReader->pFd==0);
+ if( rc==SQLITE_OK && pSorter->pReader->pFd==0 ) rc = SQLITE_DONE;
}else
#endif
/*if( !pSorter->bUseThreads )*/ {
+ int res = 0;
assert( pSorter->pMerger!=0 );
assert( pSorter->pMerger->pTask==(&pSorter->aTask[0]) );
- rc = vdbeMergeEngineStep(pSorter->pMerger, pbEof);
+ rc = vdbeMergeEngineStep(pSorter->pMerger, &res);
+ if( rc==SQLITE_OK && res ) rc = SQLITE_DONE;
}
}else{
SorterRecord *pFree = pSorter->list.pList;
pSorter->list.pList = pFree->u.pNext;
pFree->u.pNext = 0;
if( pSorter->list.aMemory==0 ) vdbeSorterRecordFree(db, pFree);
- *pbEof = !pSorter->list.pList;
- rc = SQLITE_OK;
+ rc = pSorter->list.pList ? SQLITE_OK : SQLITE_DONE;
}
return rc;
}
** Copy the current sorter key into the memory cell pOut.
*/
SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *pCsr, Mem *pOut){
- VdbeSorter *pSorter = pCsr->pSorter;
+ VdbeSorter *pSorter;
void *pKey; int nKey; /* Sorter key to copy into pOut */
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
pKey = vdbeSorterRowkey(pSorter, &nKey);
if( sqlite3VdbeMemClearAndResize(pOut, nKey) ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pOut->n = nKey;
MemSetTypeFlag(pOut, MEM_Blob);
int nKeyCol, /* Compare this many columns */
int *pRes /* OUT: Result of comparison */
){
- VdbeSorter *pSorter = pCsr->pSorter;
- UnpackedRecord *r2 = pSorter->pUnpacked;
- KeyInfo *pKeyInfo = pCsr->pKeyInfo;
+ VdbeSorter *pSorter;
+ UnpackedRecord *r2;
+ KeyInfo *pKeyInfo;
int i;
void *pKey; int nKey; /* Sorter key to compare pVal with */
+ assert( pCsr->eCurType==CURTYPE_SORTER );
+ pSorter = pCsr->uc.pSorter;
+ r2 = pSorter->pUnpacked;
+ pKeyInfo = pCsr->pKeyInfo;
if( r2==0 ){
- char *p;
- r2 = pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pKeyInfo,0,0,&p);
- assert( pSorter->pUnpacked==(UnpackedRecord*)p );
- if( r2==0 ) return SQLITE_NOMEM;
+ r2 = pSorter->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pKeyInfo);
+ if( r2==0 ) return SQLITE_NOMEM_BKPT;
r2->nField = nKeyCol;
}
assert( r2->nField==nKeyCol );
}
/************** End of vdbesort.c ********************************************/
-/************** Begin file journal.c *****************************************/
-/*
-** 2007 August 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file implements a special kind of sqlite3_file object used
-** by SQLite to create journal files if the atomic-write optimization
-** is enabled.
-**
-** The distinctive characteristic of this sqlite3_file is that the
-** actual on disk file is created lazily. When the file is created,
-** the caller specifies a buffer size for an in-memory buffer to
-** be used to service read() and write() requests. The actual file
-** on disk is not created or populated until either:
-**
-** 1) The in-memory representation grows too large for the allocated
-** buffer, or
-** 2) The sqlite3JournalCreate() function is called.
-*/
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
-/* #include "sqliteInt.h" */
-
-
-/*
-** A JournalFile object is a subclass of sqlite3_file used by
-** as an open file handle for journal files.
-*/
-struct JournalFile {
- sqlite3_io_methods *pMethod; /* I/O methods on journal files */
- int nBuf; /* Size of zBuf[] in bytes */
- char *zBuf; /* Space to buffer journal writes */
- int iSize; /* Amount of zBuf[] currently used */
- int flags; /* xOpen flags */
- sqlite3_vfs *pVfs; /* The "real" underlying VFS */
- sqlite3_file *pReal; /* The "real" underlying file descriptor */
- const char *zJournal; /* Name of the journal file */
-};
-typedef struct JournalFile JournalFile;
-
-/*
-** If it does not already exists, create and populate the on-disk file
-** for JournalFile p.
-*/
-static int createFile(JournalFile *p){
- int rc = SQLITE_OK;
- if( !p->pReal ){
- sqlite3_file *pReal = (sqlite3_file *)&p[1];
- rc = sqlite3OsOpen(p->pVfs, p->zJournal, pReal, p->flags, 0);
- if( rc==SQLITE_OK ){
- p->pReal = pReal;
- if( p->iSize>0 ){
- assert(p->iSize<=p->nBuf);
- rc = sqlite3OsWrite(p->pReal, p->zBuf, p->iSize, 0);
- }
- if( rc!=SQLITE_OK ){
- /* If an error occurred while writing to the file, close it before
- ** returning. This way, SQLite uses the in-memory journal data to
- ** roll back changes made to the internal page-cache before this
- ** function was called. */
- sqlite3OsClose(pReal);
- p->pReal = 0;
- }
- }
- }
- return rc;
-}
-
-/*
-** Close the file.
-*/
-static int jrnlClose(sqlite3_file *pJfd){
- JournalFile *p = (JournalFile *)pJfd;
- if( p->pReal ){
- sqlite3OsClose(p->pReal);
- }
- sqlite3_free(p->zBuf);
- return SQLITE_OK;
-}
-
-/*
-** Read data from the file.
-*/
-static int jrnlRead(
- sqlite3_file *pJfd, /* The journal file from which to read */
- void *zBuf, /* Put the results here */
- int iAmt, /* Number of bytes to read */
- sqlite_int64 iOfst /* Begin reading at this offset */
-){
- int rc = SQLITE_OK;
- JournalFile *p = (JournalFile *)pJfd;
- if( p->pReal ){
- rc = sqlite3OsRead(p->pReal, zBuf, iAmt, iOfst);
- }else if( (iAmt+iOfst)>p->iSize ){
- rc = SQLITE_IOERR_SHORT_READ;
- }else{
- memcpy(zBuf, &p->zBuf[iOfst], iAmt);
- }
- return rc;
-}
-
-/*
-** Write data to the file.
-*/
-static int jrnlWrite(
- sqlite3_file *pJfd, /* The journal file into which to write */
- const void *zBuf, /* Take data to be written from here */
- int iAmt, /* Number of bytes to write */
- sqlite_int64 iOfst /* Begin writing at this offset into the file */
-){
- int rc = SQLITE_OK;
- JournalFile *p = (JournalFile *)pJfd;
- if( !p->pReal && (iOfst+iAmt)>p->nBuf ){
- rc = createFile(p);
- }
- if( rc==SQLITE_OK ){
- if( p->pReal ){
- rc = sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst);
- }else{
- memcpy(&p->zBuf[iOfst], zBuf, iAmt);
- if( p->iSize<(iOfst+iAmt) ){
- p->iSize = (iOfst+iAmt);
- }
- }
- }
- return rc;
-}
-
-/*
-** Truncate the file.
-*/
-static int jrnlTruncate(sqlite3_file *pJfd, sqlite_int64 size){
- int rc = SQLITE_OK;
- JournalFile *p = (JournalFile *)pJfd;
- if( p->pReal ){
- rc = sqlite3OsTruncate(p->pReal, size);
- }else if( size<p->iSize ){
- p->iSize = size;
- }
- return rc;
-}
-
-/*
-** Sync the file.
-*/
-static int jrnlSync(sqlite3_file *pJfd, int flags){
- int rc;
- JournalFile *p = (JournalFile *)pJfd;
- if( p->pReal ){
- rc = sqlite3OsSync(p->pReal, flags);
- }else{
- rc = SQLITE_OK;
- }
- return rc;
-}
-
-/*
-** Query the size of the file in bytes.
-*/
-static int jrnlFileSize(sqlite3_file *pJfd, sqlite_int64 *pSize){
- int rc = SQLITE_OK;
- JournalFile *p = (JournalFile *)pJfd;
- if( p->pReal ){
- rc = sqlite3OsFileSize(p->pReal, pSize);
- }else{
- *pSize = (sqlite_int64) p->iSize;
- }
- return rc;
-}
-
-/*
-** Table of methods for JournalFile sqlite3_file object.
-*/
-static struct sqlite3_io_methods JournalFileMethods = {
- 1, /* iVersion */
- jrnlClose, /* xClose */
- jrnlRead, /* xRead */
- jrnlWrite, /* xWrite */
- jrnlTruncate, /* xTruncate */
- jrnlSync, /* xSync */
- jrnlFileSize, /* xFileSize */
- 0, /* xLock */
- 0, /* xUnlock */
- 0, /* xCheckReservedLock */
- 0, /* xFileControl */
- 0, /* xSectorSize */
- 0, /* xDeviceCharacteristics */
- 0, /* xShmMap */
- 0, /* xShmLock */
- 0, /* xShmBarrier */
- 0 /* xShmUnmap */
-};
-
-/*
-** Open a journal file.
-*/
-SQLITE_PRIVATE int sqlite3JournalOpen(
- sqlite3_vfs *pVfs, /* The VFS to use for actual file I/O */
- const char *zName, /* Name of the journal file */
- sqlite3_file *pJfd, /* Preallocated, blank file handle */
- int flags, /* Opening flags */
- int nBuf /* Bytes buffered before opening the file */
-){
- JournalFile *p = (JournalFile *)pJfd;
- memset(p, 0, sqlite3JournalSize(pVfs));
- if( nBuf>0 ){
- p->zBuf = sqlite3MallocZero(nBuf);
- if( !p->zBuf ){
- return SQLITE_NOMEM;
- }
- }else{
- return sqlite3OsOpen(pVfs, zName, pJfd, flags, 0);
- }
- p->pMethod = &JournalFileMethods;
- p->nBuf = nBuf;
- p->flags = flags;
- p->zJournal = zName;
- p->pVfs = pVfs;
- return SQLITE_OK;
-}
-
-/*
-** If the argument p points to a JournalFile structure, and the underlying
-** file has not yet been created, create it now.
-*/
-SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){
- if( p->pMethods!=&JournalFileMethods ){
- return SQLITE_OK;
- }
- return createFile((JournalFile *)p);
-}
-
-/*
-** The file-handle passed as the only argument is guaranteed to be an open
-** file. It may or may not be of class JournalFile. If the file is a
-** JournalFile, and the underlying file on disk has not yet been opened,
-** return 0. Otherwise, return 1.
-*/
-SQLITE_PRIVATE int sqlite3JournalExists(sqlite3_file *p){
- return (p->pMethods!=&JournalFileMethods || ((JournalFile *)p)->pReal!=0);
-}
-
-/*
-** Return the number of bytes required to store a JournalFile that uses vfs
-** pVfs to create the underlying on-disk files.
-*/
-SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){
- return (pVfs->szOsFile+sizeof(JournalFile));
-}
-#endif
-
-/************** End of journal.c *********************************************/
/************** Begin file memjournal.c **************************************/
/*
** 2008 October 7
** This file contains code use to implement an in-memory rollback journal.
** The in-memory rollback journal is used to journal transactions for
** ":memory:" databases and when the journal_mode=MEMORY pragma is used.
+**
+** Update: The in-memory journal is also used to temporarily cache
+** smaller journals that are not critical for power-loss recovery.
+** For example, statement journals that are not too big will be held
+** entirely in memory, thus reducing the number of file I/O calls, and
+** more importantly, reducing temporary file creation events. If these
+** journals become too large for memory, they are spilled to disk. But
+** in the common case, they are usually small and no file I/O needs to
+** occur.
*/
/* #include "sqliteInt.h" */
typedef struct FilePoint FilePoint;
typedef struct FileChunk FileChunk;
-/* Space to hold the rollback journal is allocated in increments of
-** this many bytes.
-**
-** The size chosen is a little less than a power of two. That way,
-** the FileChunk object will have a size that almost exactly fills
-** a power-of-two allocation. This minimizes wasted space in power-of-two
-** memory allocators.
-*/
-#define JOURNAL_CHUNKSIZE ((int)(1024-sizeof(FileChunk*)))
-
/*
** The rollback journal is composed of a linked list of these structures.
+**
+** The zChunk array is always at least 8 bytes in size - usually much more.
+** Its actual size is stored in the MemJournal.nChunkSize variable.
*/
struct FileChunk {
FileChunk *pNext; /* Next chunk in the journal */
- u8 zChunk[JOURNAL_CHUNKSIZE]; /* Content of this chunk */
+ u8 zChunk[8]; /* Content of this chunk */
};
+/*
+** By default, allocate this many bytes of memory for each FileChunk object.
+*/
+#define MEMJOURNAL_DFLT_FILECHUNKSIZE 1024
+
+/*
+** For chunk size nChunkSize, return the number of bytes that should
+** be allocated for each FileChunk structure.
+*/
+#define fileChunkSize(nChunkSize) (sizeof(FileChunk) + ((nChunkSize)-8))
+
/*
** An instance of this object serves as a cursor into the rollback journal.
** The cursor can be either for reading or writing.
};
/*
-** This subclass is a subclass of sqlite3_file. Each open memory-journal
+** This structure is a subclass of sqlite3_file. Each open memory-journal
** is an instance of this class.
*/
struct MemJournal {
- sqlite3_io_methods *pMethod; /* Parent class. MUST BE FIRST */
+ const sqlite3_io_methods *pMethod; /* Parent class. MUST BE FIRST */
+ int nChunkSize; /* In-memory chunk-size */
+
+ int nSpill; /* Bytes of data before flushing */
+ int nSize; /* Bytes of data currently in memory */
FileChunk *pFirst; /* Head of in-memory chunk-list */
FilePoint endpoint; /* Pointer to the end of the file */
FilePoint readpoint; /* Pointer to the end of the last xRead() */
+
+ int flags; /* xOpen flags */
+ sqlite3_vfs *pVfs; /* The "real" underlying VFS */
+ const char *zJournal; /* Name of the journal file */
};
/*
int iChunkOffset;
FileChunk *pChunk;
- /* SQLite never tries to read past the end of a rollback journal file */
- assert( iOfst+iAmt<=p->endpoint.iOffset );
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ if( (iAmt+iOfst)>p->endpoint.iOffset ){
+ return SQLITE_IOERR_SHORT_READ;
+ }
+#endif
+ assert( (iAmt+iOfst)<=p->endpoint.iOffset );
+ assert( p->readpoint.iOffset==0 || p->readpoint.pChunk!=0 );
if( p->readpoint.iOffset!=iOfst || iOfst==0 ){
sqlite3_int64 iOff = 0;
for(pChunk=p->pFirst;
- ALWAYS(pChunk) && (iOff+JOURNAL_CHUNKSIZE)<=iOfst;
+ ALWAYS(pChunk) && (iOff+p->nChunkSize)<=iOfst;
pChunk=pChunk->pNext
){
- iOff += JOURNAL_CHUNKSIZE;
+ iOff += p->nChunkSize;
}
}else{
pChunk = p->readpoint.pChunk;
+ assert( pChunk!=0 );
}
- iChunkOffset = (int)(iOfst%JOURNAL_CHUNKSIZE);
+ iChunkOffset = (int)(iOfst%p->nChunkSize);
do {
- int iSpace = JOURNAL_CHUNKSIZE - iChunkOffset;
- int nCopy = MIN(nRead, (JOURNAL_CHUNKSIZE - iChunkOffset));
- memcpy(zOut, &pChunk->zChunk[iChunkOffset], nCopy);
+ int iSpace = p->nChunkSize - iChunkOffset;
+ int nCopy = MIN(nRead, (p->nChunkSize - iChunkOffset));
+ memcpy(zOut, (u8*)pChunk->zChunk + iChunkOffset, nCopy);
zOut += nCopy;
nRead -= iSpace;
iChunkOffset = 0;
} while( nRead>=0 && (pChunk=pChunk->pNext)!=0 && nRead>0 );
- p->readpoint.iOffset = iOfst+iAmt;
+ p->readpoint.iOffset = pChunk ? iOfst+iAmt : 0;
p->readpoint.pChunk = pChunk;
return SQLITE_OK;
}
+/*
+** Free the list of FileChunk structures headed at MemJournal.pFirst.
+*/
+static void memjrnlFreeChunks(MemJournal *p){
+ FileChunk *pIter;
+ FileChunk *pNext;
+ for(pIter=p->pFirst; pIter; pIter=pNext){
+ pNext = pIter->pNext;
+ sqlite3_free(pIter);
+ }
+ p->pFirst = 0;
+}
+
+/*
+** Flush the contents of memory to a real file on disk.
+*/
+static int memjrnlCreateFile(MemJournal *p){
+ int rc;
+ sqlite3_file *pReal = (sqlite3_file*)p;
+ MemJournal copy = *p;
+
+ memset(p, 0, sizeof(MemJournal));
+ rc = sqlite3OsOpen(copy.pVfs, copy.zJournal, pReal, copy.flags, 0);
+ if( rc==SQLITE_OK ){
+ int nChunk = copy.nChunkSize;
+ i64 iOff = 0;
+ FileChunk *pIter;
+ for(pIter=copy.pFirst; pIter; pIter=pIter->pNext){
+ if( iOff + nChunk > copy.endpoint.iOffset ){
+ nChunk = copy.endpoint.iOffset - iOff;
+ }
+ rc = sqlite3OsWrite(pReal, (u8*)pIter->zChunk, nChunk, iOff);
+ if( rc ) break;
+ iOff += nChunk;
+ }
+ if( rc==SQLITE_OK ){
+ /* No error has occurred. Free the in-memory buffers. */
+ memjrnlFreeChunks(©);
+ }
+ }
+ if( rc!=SQLITE_OK ){
+ /* If an error occurred while creating or writing to the file, restore
+ ** the original before returning. This way, SQLite uses the in-memory
+ ** journal data to roll back changes made to the internal page-cache
+ ** before this function was called. */
+ sqlite3OsClose(pReal);
+ *p = copy;
+ }
+ return rc;
+}
+
+
/*
** Write data to the file.
*/
int nWrite = iAmt;
u8 *zWrite = (u8 *)zBuf;
- /* An in-memory journal file should only ever be appended to. Random
- ** access writes are not required by sqlite.
- */
- assert( iOfst==p->endpoint.iOffset );
- UNUSED_PARAMETER(iOfst);
+ /* If the file should be created now, create it and write the new data
+ ** into the file on disk. */
+ if( p->nSpill>0 && (iAmt+iOfst)>p->nSpill ){
+ int rc = memjrnlCreateFile(p);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3OsWrite(pJfd, zBuf, iAmt, iOfst);
+ }
+ return rc;
+ }
- while( nWrite>0 ){
- FileChunk *pChunk = p->endpoint.pChunk;
- int iChunkOffset = (int)(p->endpoint.iOffset%JOURNAL_CHUNKSIZE);
- int iSpace = MIN(nWrite, JOURNAL_CHUNKSIZE - iChunkOffset);
+ /* If the contents of this write should be stored in memory */
+ else{
+ /* An in-memory journal file should only ever be appended to. Random
+ ** access writes are not required. The only exception to this is when
+ ** the in-memory journal is being used by a connection using the
+ ** atomic-write optimization. In this case the first 28 bytes of the
+ ** journal file may be written as part of committing the transaction. */
+ assert( iOfst==p->endpoint.iOffset || iOfst==0 );
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+ if( iOfst==0 && p->pFirst ){
+ assert( p->nChunkSize>iAmt );
+ memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt);
+ }else
+#else
+ assert( iOfst>0 || p->pFirst==0 );
+#endif
+ {
+ while( nWrite>0 ){
+ FileChunk *pChunk = p->endpoint.pChunk;
+ int iChunkOffset = (int)(p->endpoint.iOffset%p->nChunkSize);
+ int iSpace = MIN(nWrite, p->nChunkSize - iChunkOffset);
+
+ if( iChunkOffset==0 ){
+ /* New chunk is required to extend the file. */
+ FileChunk *pNew = sqlite3_malloc(fileChunkSize(p->nChunkSize));
+ if( !pNew ){
+ return SQLITE_IOERR_NOMEM_BKPT;
+ }
+ pNew->pNext = 0;
+ if( pChunk ){
+ assert( p->pFirst );
+ pChunk->pNext = pNew;
+ }else{
+ assert( !p->pFirst );
+ p->pFirst = pNew;
+ }
+ p->endpoint.pChunk = pNew;
+ }
- if( iChunkOffset==0 ){
- /* New chunk is required to extend the file. */
- FileChunk *pNew = sqlite3_malloc(sizeof(FileChunk));
- if( !pNew ){
- return SQLITE_IOERR_NOMEM;
+ memcpy((u8*)p->endpoint.pChunk->zChunk + iChunkOffset, zWrite, iSpace);
+ zWrite += iSpace;
+ nWrite -= iSpace;
+ p->endpoint.iOffset += iSpace;
}
- pNew->pNext = 0;
- if( pChunk ){
- assert( p->pFirst );
- pChunk->pNext = pNew;
- }else{
- assert( !p->pFirst );
- p->pFirst = pNew;
- }
- p->endpoint.pChunk = pNew;
+ p->nSize = iAmt + iOfst;
}
-
- memcpy(&p->endpoint.pChunk->zChunk[iChunkOffset], zWrite, iSpace);
- zWrite += iSpace;
- nWrite -= iSpace;
- p->endpoint.iOffset += iSpace;
}
return SQLITE_OK;
/*
** Truncate the file.
+**
+** If the journal file is already on disk, truncate it there. Or, if it
+** is still in main memory but is being truncated to zero bytes in size,
+** ignore
*/
static int memjrnlTruncate(sqlite3_file *pJfd, sqlite_int64 size){
MemJournal *p = (MemJournal *)pJfd;
- FileChunk *pChunk;
- assert(size==0);
- UNUSED_PARAMETER(size);
- pChunk = p->pFirst;
- while( pChunk ){
- FileChunk *pTmp = pChunk;
- pChunk = pChunk->pNext;
- sqlite3_free(pTmp);
- }
- sqlite3MemJournalOpen(pJfd);
+ if( ALWAYS(size==0) ){
+ memjrnlFreeChunks(p);
+ p->nSize = 0;
+ p->endpoint.pChunk = 0;
+ p->endpoint.iOffset = 0;
+ p->readpoint.pChunk = 0;
+ p->readpoint.iOffset = 0;
+ }
return SQLITE_OK;
}
** Close the file.
*/
static int memjrnlClose(sqlite3_file *pJfd){
- memjrnlTruncate(pJfd, 0);
+ MemJournal *p = (MemJournal *)pJfd;
+ memjrnlFreeChunks(p);
return SQLITE_OK;
}
-
/*
** Sync the file.
**
-** Syncing an in-memory journal is a no-op. And, in fact, this routine
-** is never called in a working implementation. This implementation
-** exists purely as a contingency, in case some malfunction in some other
-** part of SQLite causes Sync to be called by mistake.
+** If the real file has been created, call its xSync method. Otherwise,
+** syncing an in-memory journal is a no-op.
*/
-static int memjrnlSync(sqlite3_file *NotUsed, int NotUsed2){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
+static int memjrnlSync(sqlite3_file *pJfd, int flags){
+ UNUSED_PARAMETER2(pJfd, flags);
return SQLITE_OK;
}
};
/*
-** Open a journal file.
+** Open a journal file.
+**
+** The behaviour of the journal file depends on the value of parameter
+** nSpill. If nSpill is 0, then the journal file is always create and
+** accessed using the underlying VFS. If nSpill is less than zero, then
+** all content is always stored in main-memory. Finally, if nSpill is a
+** positive value, then the journal file is initially created in-memory
+** but may be flushed to disk later on. In this case the journal file is
+** flushed to disk either when it grows larger than nSpill bytes in size,
+** or when sqlite3JournalCreate() is called.
+*/
+SQLITE_PRIVATE int sqlite3JournalOpen(
+ sqlite3_vfs *pVfs, /* The VFS to use for actual file I/O */
+ const char *zName, /* Name of the journal file */
+ sqlite3_file *pJfd, /* Preallocated, blank file handle */
+ int flags, /* Opening flags */
+ int nSpill /* Bytes buffered before opening the file */
+){
+ MemJournal *p = (MemJournal*)pJfd;
+
+ /* Zero the file-handle object. If nSpill was passed zero, initialize
+ ** it using the sqlite3OsOpen() function of the underlying VFS. In this
+ ** case none of the code in this module is executed as a result of calls
+ ** made on the journal file-handle. */
+ memset(p, 0, sizeof(MemJournal));
+ if( nSpill==0 ){
+ return sqlite3OsOpen(pVfs, zName, pJfd, flags, 0);
+ }
+
+ if( nSpill>0 ){
+ p->nChunkSize = nSpill;
+ }else{
+ p->nChunkSize = 8 + MEMJOURNAL_DFLT_FILECHUNKSIZE - sizeof(FileChunk);
+ assert( MEMJOURNAL_DFLT_FILECHUNKSIZE==fileChunkSize(p->nChunkSize) );
+ }
+
+ p->pMethod = (const sqlite3_io_methods*)&MemJournalMethods;
+ p->nSpill = nSpill;
+ p->flags = flags;
+ p->zJournal = zName;
+ p->pVfs = pVfs;
+ return SQLITE_OK;
+}
+
+/*
+** Open an in-memory journal file.
*/
SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *pJfd){
- MemJournal *p = (MemJournal *)pJfd;
- assert( EIGHT_BYTE_ALIGNMENT(p) );
- memset(p, 0, sqlite3MemJournalSize());
- p->pMethod = (sqlite3_io_methods*)&MemJournalMethods;
+ sqlite3JournalOpen(0, 0, pJfd, 0, -1);
+}
+
+#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \
+ || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE)
+/*
+** If the argument p points to a MemJournal structure that is not an
+** in-memory-only journal file (i.e. is one that was opened with a +ve
+** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying
+** file has not yet been created, create it now.
+*/
+SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *pJfd){
+ int rc = SQLITE_OK;
+ MemJournal *p = (MemJournal*)pJfd;
+ if( p->pMethod==&MemJournalMethods && (
+#ifdef SQLITE_ENABLE_ATOMIC_WRITE
+ p->nSpill>0
+#else
+ /* While this appears to not be possible without ATOMIC_WRITE, the
+ ** paths are complex, so it seems prudent to leave the test in as
+ ** a NEVER(), in case our analysis is subtly flawed. */
+ NEVER(p->nSpill>0)
+#endif
+#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE
+ || (p->flags & SQLITE_OPEN_MAIN_JOURNAL)
+#endif
+ )){
+ rc = memjrnlCreateFile(p);
+ }
+ return rc;
}
+#endif
/*
-** Return true if the file-handle passed as an argument is
-** an in-memory journal
+** The file-handle passed as the only argument is open on a journal file.
+** Return true if this "journal file" is currently stored in heap memory,
+** or false otherwise.
*/
-SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *pJfd){
- return pJfd->pMethods==&MemJournalMethods;
+SQLITE_PRIVATE int sqlite3JournalIsInMemory(sqlite3_file *p){
+ return p->pMethods==&MemJournalMethods;
}
/*
-** Return the number of bytes required to store a MemJournal file descriptor.
+** Return the number of bytes required to store a JournalFile that uses vfs
+** pVfs to create the underlying on-disk files.
*/
-SQLITE_PRIVATE int sqlite3MemJournalSize(void){
- return sizeof(MemJournal);
+SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){
+ return MAX(pVfs->szOsFile, (int)sizeof(MemJournal));
}
/************** End of memjournal.c ******************************************/
**
** WRC_Continue Continue descending down the tree.
**
-** WRC_Prune Do not descend into child nodes. But allow
+** WRC_Prune Do not descend into child nodes, but allow
** the walk to continue with sibling nodes.
**
** WRC_Abort Do no more callbacks. Unwind the stack and
-** return the top-level walk call.
+** return from the top-level walk call.
**
** The return value from this routine is WRC_Abort to abandon the tree walk
** and WRC_Continue to continue.
*/
-SQLITE_PRIVATE int sqlite3WalkExpr(Walker *pWalker, Expr *pExpr){
+static SQLITE_NOINLINE int walkExpr(Walker *pWalker, Expr *pExpr){
int rc;
- if( pExpr==0 ) return WRC_Continue;
testcase( ExprHasProperty(pExpr, EP_TokenOnly) );
testcase( ExprHasProperty(pExpr, EP_Reduced) );
- rc = pWalker->xExprCallback(pWalker, pExpr);
- if( rc==WRC_Continue
- && !ExprHasProperty(pExpr,EP_TokenOnly) ){
- if( sqlite3WalkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort;
- if( sqlite3WalkExpr(pWalker, pExpr->pRight) ) return WRC_Abort;
- if( ExprHasProperty(pExpr, EP_xIsSelect) ){
- if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort;
- }else{
- if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort;
+ while(1){
+ rc = pWalker->xExprCallback(pWalker, pExpr);
+ if( rc ) return rc & WRC_Abort;
+ if( !ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){
+ if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort;
+ assert( pExpr->x.pList==0 || pExpr->pRight==0 );
+ if( pExpr->pRight ){
+ pExpr = pExpr->pRight;
+ continue;
+ }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){
+ if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort;
+ }else if( pExpr->x.pList ){
+ if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort;
+ }
}
+ break;
}
- return rc & WRC_Abort;
+ return WRC_Continue;
+}
+SQLITE_PRIVATE int sqlite3WalkExpr(Walker *pWalker, Expr *pExpr){
+ return pExpr ? walkExpr(pWalker,pExpr) : WRC_Continue;
}
/*
if( sqlite3WalkExpr(pWalker, p->pHaving) ) return WRC_Abort;
if( sqlite3WalkExprList(pWalker, p->pOrderBy) ) return WRC_Abort;
if( sqlite3WalkExpr(pWalker, p->pLimit) ) return WRC_Abort;
- if( sqlite3WalkExpr(pWalker, p->pOffset) ) return WRC_Abort;
return WRC_Continue;
}
struct SrcList_item *pItem;
pSrc = p->pSrc;
- if( ALWAYS(pSrc) ){
- for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){
- if( sqlite3WalkSelect(pWalker, pItem->pSelect) ){
- return WRC_Abort;
- }
- if( pItem->fg.isTabFunc
- && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg)
- ){
- return WRC_Abort;
- }
+ assert( pSrc!=0 );
+ for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){
+ if( pItem->pSelect && sqlite3WalkSelect(pWalker, pItem->pSelect) ){
+ return WRC_Abort;
+ }
+ if( pItem->fg.isTabFunc
+ && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg)
+ ){
+ return WRC_Abort;
}
}
return WRC_Continue;
**
** If it is not NULL, the xSelectCallback() callback is invoked before
** the walk of the expressions and FROM clause. The xSelectCallback2()
-** method, if it is not NULL, is invoked following the walk of the
-** expressions and FROM clause.
+** method is invoked following the walk of the expressions and FROM clause,
+** but only if both xSelectCallback and xSelectCallback2 are both non-NULL
+** and if the expressions and FROM clause both return WRC_Continue;
**
** Return WRC_Continue under normal conditions. Return WRC_Abort if
** there is an abort request.
*/
SQLITE_PRIVATE int sqlite3WalkSelect(Walker *pWalker, Select *p){
int rc;
- if( p==0 || (pWalker->xSelectCallback==0 && pWalker->xSelectCallback2==0) ){
- return WRC_Continue;
- }
- rc = WRC_Continue;
- pWalker->walkerDepth++;
- while( p ){
- if( pWalker->xSelectCallback ){
- rc = pWalker->xSelectCallback(pWalker, p);
- if( rc ) break;
- }
+ if( p==0 ) return WRC_Continue;
+ if( pWalker->xSelectCallback==0 ) return WRC_Continue;
+ do{
+ rc = pWalker->xSelectCallback(pWalker, p);
+ if( rc ) return rc & WRC_Abort;
if( sqlite3WalkSelectExpr(pWalker, p)
|| sqlite3WalkSelectFrom(pWalker, p)
){
- pWalker->walkerDepth--;
return WRC_Abort;
}
if( pWalker->xSelectCallback2 ){
pWalker->xSelectCallback2(pWalker, p);
}
p = p->pPrior;
- }
- pWalker->walkerDepth--;
- return rc & WRC_Abort;
+ }while( p!=0 );
+ return WRC_Continue;
}
/************** End of walker.c **********************************************/
** table and column.
*/
/* #include "sqliteInt.h" */
-/* #include <stdlib.h> */
-/* #include <string.h> */
/*
** Walk the expression tree pExpr and increase the aggregate function
zDb = 0;
}else{
for(i=0; i<db->nDb; i++){
- assert( db->aDb[i].zName );
- if( sqlite3StrICmp(db->aDb[i].zName,zDb)==0 ){
+ assert( db->aDb[i].zDbSName );
+ if( sqlite3StrICmp(db->aDb[i].zDbSName,zDb)==0 ){
pSchema = db->aDb[i].pSchema;
break;
}
}
/* Start at the inner-most context and move outward until a match is found */
- while( pNC && cnt==0 ){
+ assert( pNC && cnt==0 );
+ do{
ExprList *pEList;
SrcList *pSrcList = pNC->pSrcList;
}
if( iCol>=pTab->nCol && sqlite3IsRowid(zCol) && VisibleRowid(pTab) ){
/* IMP: R-51414-32910 */
- /* IMP: R-44911-55124 */
iCol = -1;
}
if( iCol<pTab->nCol ){
&& VisibleRowid(pMatch->pTab)
){
cnt = 1;
- pExpr->iColumn = -1; /* IMP: R-44911-55124 */
+ pExpr->iColumn = -1;
pExpr->affinity = SQLITE_AFF_INTEGER;
}
sqlite3ErrorMsg(pParse, "misuse of aliased aggregate %s", zAs);
return WRC_Abort;
}
+ if( sqlite3ExprVectorSize(pOrig)!=1 ){
+ sqlite3ErrorMsg(pParse, "row value misused");
+ return WRC_Abort;
+ }
resolveAlias(pParse, pEList, j, pExpr, "", nSubquery);
cnt = 1;
pMatch = 0;
/* Advance to the next name context. The loop will exit when either
** we have a match (cnt>0) or when we run out of name contexts.
*/
- if( cnt==0 ){
- pNC = pNC->pNext;
- nSubquery++;
- }
- }
+ if( cnt ) break;
+ pNC = pNC->pNext;
+ nSubquery++;
+ }while( pNC );
+
/*
** If X and Y are NULL (in other words if only the column name Z is
** Because no reference was made to outer contexts, the pNC->nRef
** fields are not changed in any context.
*/
- if( cnt==0 && zTab==0 && ExprHasProperty(pExpr,EP_DblQuoted) ){
- pExpr->op = TK_STRING;
- pExpr->pTab = 0;
- return WRC_Prune;
+ if( cnt==0 && zTab==0 ){
+ assert( pExpr->op==TK_ID );
+ if( ExprHasProperty(pExpr,EP_DblQuoted) ){
+ pExpr->op = TK_STRING;
+ pExpr->pTab = 0;
+ return WRC_Prune;
+ }
+ if( sqlite3ExprIdToTrueFalse(pExpr) ){
+ return WRC_Prune;
+ }
}
/*
sqlite3ExprDelete(db, pExpr->pRight);
pExpr->pRight = 0;
pExpr->op = (isTrigger ? TK_TRIGGER : TK_COLUMN);
+ ExprSetProperty(pExpr, EP_Leaf);
lookupname_end:
if( cnt==1 ){
assert( pNC!=0 );
testcase( iCol==BMS-1 );
pItem->colUsed |= ((Bitmask)1)<<(iCol>=BMS ? BMS-1 : iCol);
}
- ExprSetProperty(p, EP_Resolved);
}
return p;
}
pParse = pNC->pParse;
assert( pParse==pWalker->pParse );
- if( ExprHasProperty(pExpr, EP_Resolved) ) return WRC_Prune;
- ExprSetProperty(pExpr, EP_Resolved);
#ifndef NDEBUG
if( pNC->pSrcList && pNC->pSrcList->nAlloc>0 ){
SrcList *pSrcList = pNC->pSrcList;
SrcList *pSrcList = pNC->pSrcList;
struct SrcList_item *pItem;
assert( pSrcList && pSrcList->nSrc==1 );
- pItem = pSrcList->a;
+ pItem = pSrcList->a;
+ assert( HasRowid(pItem->pTab) && pItem->pTab->pSelect==0 );
pExpr->op = TK_COLUMN;
pExpr->pTab = pItem->pTab;
pExpr->iTable = pItem->iCursor;
#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT)
&& !defined(SQLITE_OMIT_SUBQUERY) */
- /* A lone identifier is the name of a column.
- */
- case TK_ID: {
- return lookupName(pParse, 0, 0, pExpr->u.zToken, pNC, pExpr);
- }
-
- /* A table name and column name: ID.ID
+ /* A column name: ID
+ ** Or table name and column name: ID.ID
** Or a database, table and column: ID.ID.ID
+ **
+ ** The TK_ID and TK_OUT cases are combined so that there will only
+ ** be one call to lookupName(). Then the compiler will in-line
+ ** lookupName() for a size reduction and performance increase.
*/
+ case TK_ID:
case TK_DOT: {
const char *zColumn;
const char *zTable;
const char *zDb;
Expr *pRight;
- /* if( pSrcList==0 ) break; */
- notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr);
- /*notValid(pParse, pNC, "the \".\" operator", NC_PartIdx|NC_IsCheck, 1);*/
- pRight = pExpr->pRight;
- if( pRight->op==TK_ID ){
+ if( pExpr->op==TK_ID ){
zDb = 0;
- zTable = pExpr->pLeft->u.zToken;
- zColumn = pRight->u.zToken;
+ zTable = 0;
+ zColumn = pExpr->u.zToken;
}else{
- assert( pRight->op==TK_DOT );
- zDb = pExpr->pLeft->u.zToken;
- zTable = pRight->pLeft->u.zToken;
- zColumn = pRight->pRight->u.zToken;
+ notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr);
+ pRight = pExpr->pRight;
+ if( pRight->op==TK_ID ){
+ zDb = 0;
+ zTable = pExpr->pLeft->u.zToken;
+ zColumn = pRight->u.zToken;
+ }else{
+ assert( pRight->op==TK_DOT );
+ zDb = pExpr->pLeft->u.zToken;
+ zTable = pRight->pLeft->u.zToken;
+ zColumn = pRight->pRight->u.zToken;
+ }
}
return lookupName(pParse, zDb, zTable, zColumn, pNC, pExpr);
}
int no_such_func = 0; /* True if no such function exists */
int wrong_num_args = 0; /* True if wrong number of arguments */
int is_agg = 0; /* True if is an aggregate function */
- int auth; /* Authorization to use the function */
int nId; /* Number of characters in function name */
const char *zId; /* The function name. */
FuncDef *pDef; /* Information about the function */
u8 enc = ENC(pParse->db); /* The database encoding */
assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
- notValid(pParse, pNC, "functions", NC_PartIdx);
zId = pExpr->u.zToken;
nId = sqlite3Strlen30(zId);
- pDef = sqlite3FindFunction(pParse->db, zId, nId, n, enc, 0);
+ pDef = sqlite3FindFunction(pParse->db, zId, n, enc, 0);
if( pDef==0 ){
- pDef = sqlite3FindFunction(pParse->db, zId, nId, -2, enc, 0);
+ pDef = sqlite3FindFunction(pParse->db, zId, -2, enc, 0);
if( pDef==0 ){
no_such_func = 1;
}else{
wrong_num_args = 1;
}
}else{
- is_agg = pDef->xFunc==0;
+ is_agg = pDef->xFinalize!=0;
if( pDef->funcFlags & SQLITE_FUNC_UNLIKELY ){
ExprSetProperty(pExpr, EP_Unlikely|EP_Skip);
if( n==2 ){
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
- auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0, pDef->zName, 0);
- if( auth!=SQLITE_OK ){
- if( auth==SQLITE_DENY ){
- sqlite3ErrorMsg(pParse, "not authorized to use function: %s",
- pDef->zName);
- pNC->nErr++;
+ {
+ int auth = sqlite3AuthCheck(pParse, SQLITE_FUNCTION, 0,pDef->zName,0);
+ if( auth!=SQLITE_OK ){
+ if( auth==SQLITE_DENY ){
+ sqlite3ErrorMsg(pParse, "not authorized to use function: %s",
+ pDef->zName);
+ pNC->nErr++;
+ }
+ pExpr->op = TK_NULL;
+ return WRC_Prune;
}
- pExpr->op = TK_NULL;
- return WRC_Prune;
}
#endif
if( pDef->funcFlags & (SQLITE_FUNC_CONSTANT|SQLITE_FUNC_SLOCHNG) ){
/* Date/time functions that use 'now', and other functions like
** sqlite_version() that might change over time cannot be used
** in an index. */
- notValid(pParse, pNC, "non-deterministic functions", NC_IdxExpr);
+ notValid(pParse, pNC, "non-deterministic functions",
+ NC_IdxExpr|NC_PartIdx);
}
}
if( is_agg && (pNC->ncFlags & NC_AllowAgg)==0 ){
sqlite3ErrorMsg(pParse, "misuse of aggregate function %.*s()", nId,zId);
pNC->nErr++;
is_agg = 0;
- }else if( no_such_func && pParse->db->init.busy==0 ){
+ }else if( no_such_func && pParse->db->init.busy==0
+#ifdef SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION
+ && pParse->explain==0
+#endif
+ ){
sqlite3ErrorMsg(pParse, "no such function: %.*s", nId, zId);
pNC->nErr++;
}else if( wrong_num_args ){
assert( pNC->nRef>=nRef );
if( nRef!=pNC->nRef ){
ExprSetProperty(pExpr, EP_VarSelect);
+ pNC->ncFlags |= NC_VarSelect;
}
}
break;
notValid(pParse, pNC, "parameters", NC_IsCheck|NC_PartIdx|NC_IdxExpr);
break;
}
+ case TK_IS:
+ case TK_ISNOT: {
+ Expr *pRight;
+ assert( !ExprHasProperty(pExpr, EP_Reduced) );
+ /* Handle special cases of "x IS TRUE", "x IS FALSE", "x IS NOT TRUE",
+ ** and "x IS NOT FALSE". */
+ if( (pRight = pExpr->pRight)->op==TK_ID ){
+ int rc = resolveExprStep(pWalker, pRight);
+ if( rc==WRC_Abort ) return WRC_Abort;
+ if( pRight->op==TK_TRUEFALSE ){
+ pExpr->op2 = pExpr->op;
+ pExpr->op = TK_TRUTH;
+ return WRC_Continue;
+ }
+ }
+ /* Fall thru */
+ }
+ case TK_BETWEEN:
+ case TK_EQ:
+ case TK_NE:
+ case TK_LT:
+ case TK_LE:
+ case TK_GT:
+ case TK_GE: {
+ int nLeft, nRight;
+ if( pParse->db->mallocFailed ) break;
+ assert( pExpr->pLeft!=0 );
+ nLeft = sqlite3ExprVectorSize(pExpr->pLeft);
+ if( pExpr->op==TK_BETWEEN ){
+ nRight = sqlite3ExprVectorSize(pExpr->x.pList->a[0].pExpr);
+ if( nRight==nLeft ){
+ nRight = sqlite3ExprVectorSize(pExpr->x.pList->a[1].pExpr);
+ }
+ }else{
+ assert( pExpr->pRight!=0 );
+ nRight = sqlite3ExprVectorSize(pExpr->pRight);
+ }
+ if( nLeft!=nRight ){
+ testcase( pExpr->op==TK_EQ );
+ testcase( pExpr->op==TK_NE );
+ testcase( pExpr->op==TK_LT );
+ testcase( pExpr->op==TK_LE );
+ testcase( pExpr->op==TK_GT );
+ testcase( pExpr->op==TK_GE );
+ testcase( pExpr->op==TK_IS );
+ testcase( pExpr->op==TK_ISNOT );
+ testcase( pExpr->op==TK_BETWEEN );
+ sqlite3ErrorMsg(pParse, "row value misused");
+ }
+ break;
+ }
}
return (pParse->nErr || pParse->db->mallocFailed) ? WRC_Abort : WRC_Continue;
}
** result-set entry.
*/
for(i=0; i<pEList->nExpr; i++){
- if( sqlite3ExprCompare(pEList->a[i].pExpr, pE, -1)<2 ){
+ if( sqlite3ExprCompare(0, pEList->a[i].pExpr, pE, -1)<2 ){
return i+1;
}
}
pOrderBy = pSelect->pOrderBy;
if( pOrderBy==0 ) return 0;
db = pParse->db;
-#if SQLITE_MAX_COLUMN
if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){
sqlite3ErrorMsg(pParse, "too many terms in ORDER BY clause");
return 1;
}
-#endif
for(i=0; i<pOrderBy->nExpr; i++){
pOrderBy->a[i].done = 0;
}
struct ExprList_item *pItem;
if( pOrderBy==0 || pParse->db->mallocFailed ) return 0;
-#if SQLITE_MAX_COLUMN
if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){
sqlite3ErrorMsg(pParse, "too many terms in %s BY clause", zType);
return 1;
}
-#endif
pEList = pSelect->pEList;
assert( pEList!=0 ); /* sqlite3SelectNew() guarantees this */
for(i=0, pItem=pOrderBy->a; i<pOrderBy->nExpr; i++, pItem++){
return 1;
}
for(j=0; j<pSelect->pEList->nExpr; j++){
- if( sqlite3ExprCompare(pE, pSelect->pEList->a[j].pExpr, -1)==0 ){
+ if( sqlite3ExprCompare(0, pE, pSelect->pEList->a[j].pExpr, -1)==0 ){
pItem->u.x.iOrderByCol = j+1;
}
}
*/
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
- if( sqlite3ResolveExprNames(&sNC, p->pLimit) ||
- sqlite3ResolveExprNames(&sNC, p->pOffset) ){
+ if( sqlite3ResolveExprNames(&sNC, p->pLimit) ){
return WRC_Abort;
}
u16 savedHasAgg;
Walker w;
- if( pExpr==0 ) return 0;
-#if SQLITE_MAX_EXPR_DEPTH>0
- {
- Parse *pParse = pNC->pParse;
- if( sqlite3ExprCheckHeight(pParse, pExpr->nHeight+pNC->pParse->nHeight) ){
- return 1;
- }
- pParse->nHeight += pExpr->nHeight;
- }
-#endif
+ if( pExpr==0 ) return SQLITE_OK;
savedHasAgg = pNC->ncFlags & (NC_HasAgg|NC_MinMaxAgg);
pNC->ncFlags &= ~(NC_HasAgg|NC_MinMaxAgg);
- memset(&w, 0, sizeof(w));
+ w.pParse = pNC->pParse;
w.xExprCallback = resolveExprStep;
w.xSelectCallback = resolveSelectStep;
- w.pParse = pNC->pParse;
+ w.xSelectCallback2 = 0;
w.u.pNC = pNC;
+#if SQLITE_MAX_EXPR_DEPTH>0
+ w.pParse->nHeight += pExpr->nHeight;
+ if( sqlite3ExprCheckHeight(w.pParse, w.pParse->nHeight) ){
+ return SQLITE_ERROR;
+ }
+#endif
sqlite3WalkExpr(&w, pExpr);
#if SQLITE_MAX_EXPR_DEPTH>0
- pNC->pParse->nHeight -= pExpr->nHeight;
+ w.pParse->nHeight -= pExpr->nHeight;
#endif
- if( pNC->nErr>0 || w.pParse->nErr>0 ){
- ExprSetProperty(pExpr, EP_Error);
- }
if( pNC->ncFlags & NC_HasAgg ){
ExprSetProperty(pExpr, EP_Agg);
}
pNC->ncFlags |= savedHasAgg;
- return ExprHasProperty(pExpr, EP_Error);
+ return pNC->nErr>0 || w.pParse->nErr>0;
}
/*
ExprList *pList /* The expression list to be analyzed. */
){
int i;
- assert( pList!=0 );
- for(i=0; i<pList->nExpr; i++){
- if( sqlite3ResolveExprNames(pNC, pList->a[i].pExpr) ) return WRC_Abort;
+ if( pList ){
+ for(i=0; i<pList->nExpr; i++){
+ if( sqlite3ResolveExprNames(pNC, pList->a[i].pExpr) ) return WRC_Abort;
+ }
}
return WRC_Continue;
}
Walker w;
assert( p!=0 );
- memset(&w, 0, sizeof(w));
w.xExprCallback = resolveExprStep;
w.xSelectCallback = resolveSelectStep;
+ w.xSelectCallback2 = 0;
w.pParse = pParse;
w.u.pNC = pOuterNC;
sqlite3WalkSelect(&w, p);
*/
/* #include "sqliteInt.h" */
+/* Forward declarations */
+static void exprCodeBetween(Parse*,Expr*,int,void(*)(Parse*,Expr*,int,int),int);
+static int exprCodeVector(Parse *pParse, Expr *p, int *piToFree);
+
+/*
+** Return the affinity character for a single column of a table.
+*/
+SQLITE_PRIVATE char sqlite3TableColumnAffinity(Table *pTab, int iCol){
+ assert( iCol<pTab->nCol );
+ return iCol>=0 ? pTab->aCol[iCol].affinity : SQLITE_AFF_INTEGER;
+}
+
/*
** Return the 'affinity' of the expression pExpr if any.
**
assert( pExpr->flags&EP_xIsSelect );
return sqlite3ExprAffinity(pExpr->x.pSelect->pEList->a[0].pExpr);
}
+ if( op==TK_REGISTER ) op = pExpr->op2;
#ifndef SQLITE_OMIT_CAST
if( op==TK_CAST ){
assert( !ExprHasProperty(pExpr, EP_IntValue) );
return sqlite3AffinityType(pExpr->u.zToken, 0);
}
#endif
- if( (op==TK_AGG_COLUMN || op==TK_COLUMN || op==TK_REGISTER)
- && pExpr->pTab!=0
- ){
- /* op==TK_REGISTER && pExpr->pTab!=0 happens when pExpr was originally
- ** a TK_COLUMN but was previously evaluated and cached in a register */
- int j = pExpr->iColumn;
- if( j<0 ) return SQLITE_AFF_INTEGER;
- assert( pExpr->pTab && j<pExpr->pTab->nCol );
- return pExpr->pTab->aCol[j].affinity;
+ if( (op==TK_AGG_COLUMN || op==TK_COLUMN) && pExpr->pTab ){
+ return sqlite3TableColumnAffinity(pExpr->pTab, pExpr->iColumn);
+ }
+ if( op==TK_SELECT_COLUMN ){
+ assert( pExpr->pLeft->flags&EP_xIsSelect );
+ return sqlite3ExprAffinity(
+ pExpr->pLeft->x.pSelect->pEList->a[pExpr->iColumn].pExpr
+ );
}
return pExpr->affinity;
}
SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse *pParse, Expr *pExpr, const char *zC){
Token s;
assert( zC!=0 );
- s.z = zC;
- s.n = sqlite3Strlen30(s.z);
+ sqlite3TokenInit(&s, (char*)zC);
return sqlite3ExprAddCollateToken(pParse, pExpr, &s, 0);
}
** Return the collation sequence for the expression pExpr. If
** there is no defined collating sequence, return NULL.
**
+** See also: sqlite3ExprNNCollSeq()
+**
+** The sqlite3ExprNNCollSeq() works the same exact that it returns the
+** default collation if pExpr has no defined collation.
+**
** The collating sequence might be determined by a COLLATE operator
** or by the presence of a column with a defined collating sequence.
** COLLATE operators take first precedence. Left operands take
return pColl;
}
+/*
+** Return the collation sequence for the expression pExpr. If
+** there is no defined collating sequence, return a pointer to the
+** defautl collation sequence.
+**
+** See also: sqlite3ExprCollSeq()
+**
+** The sqlite3ExprCollSeq() routine works the same except that it
+** returns NULL if there is no defined collation.
+*/
+SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr){
+ CollSeq *p = sqlite3ExprCollSeq(pParse, pExpr);
+ if( p==0 ) p = pParse->db->pDfltColl;
+ assert( p!=0 );
+ return p;
+}
+
+/*
+** Return TRUE if the two expressions have equivalent collating sequences.
+*/
+SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse *pParse, Expr *pE1, Expr *pE2){
+ CollSeq *pColl1 = sqlite3ExprNNCollSeq(pParse, pE1);
+ CollSeq *pColl2 = sqlite3ExprNNCollSeq(pParse, pE2);
+ return sqlite3StrICmp(pColl1->zName, pColl2->zName)==0;
+}
+
/*
** pExpr is an operand of a comparison operator. aff2 is the
** type affinity of the other operand. This routine returns the
aff = sqlite3CompareAffinity(pExpr->pRight, aff);
}else if( ExprHasProperty(pExpr, EP_xIsSelect) ){
aff = sqlite3CompareAffinity(pExpr->x.pSelect->pEList->a[0].pExpr, aff);
- }else if( !aff ){
+ }else if( aff==0 ){
aff = SQLITE_AFF_BLOB;
}
return aff;
return addr;
}
+/*
+** Return true if expression pExpr is a vector, or false otherwise.
+**
+** A vector is defined as any expression that results in two or more
+** columns of result. Every TK_VECTOR node is an vector because the
+** parser will not generate a TK_VECTOR with fewer than two entries.
+** But a TK_SELECT might be either a vector or a scalar. It is only
+** considered a vector if it has two or more result columns.
+*/
+SQLITE_PRIVATE int sqlite3ExprIsVector(Expr *pExpr){
+ return sqlite3ExprVectorSize(pExpr)>1;
+}
+
+/*
+** If the expression passed as the only argument is of type TK_VECTOR
+** return the number of expressions in the vector. Or, if the expression
+** is a sub-select, return the number of columns in the sub-select. For
+** any other type of expression, return 1.
+*/
+SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr){
+ u8 op = pExpr->op;
+ if( op==TK_REGISTER ) op = pExpr->op2;
+ if( op==TK_VECTOR ){
+ return pExpr->x.pList->nExpr;
+ }else if( op==TK_SELECT ){
+ return pExpr->x.pSelect->pEList->nExpr;
+ }else{
+ return 1;
+ }
+}
+
+/*
+** Return a pointer to a subexpression of pVector that is the i-th
+** column of the vector (numbered starting with 0). The caller must
+** ensure that i is within range.
+**
+** If pVector is really a scalar (and "scalar" here includes subqueries
+** that return a single column!) then return pVector unmodified.
+**
+** pVector retains ownership of the returned subexpression.
+**
+** If the vector is a (SELECT ...) then the expression returned is
+** just the expression for the i-th term of the result set, and may
+** not be ready for evaluation because the table cursor has not yet
+** been positioned.
+*/
+SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr *pVector, int i){
+ assert( i<sqlite3ExprVectorSize(pVector) );
+ if( sqlite3ExprIsVector(pVector) ){
+ assert( pVector->op2==0 || pVector->op==TK_REGISTER );
+ if( pVector->op==TK_SELECT || pVector->op2==TK_SELECT ){
+ return pVector->x.pSelect->pEList->a[i].pExpr;
+ }else{
+ return pVector->x.pList->a[i].pExpr;
+ }
+ }
+ return pVector;
+}
+
+/*
+** Compute and return a new Expr object which when passed to
+** sqlite3ExprCode() will generate all necessary code to compute
+** the iField-th column of the vector expression pVector.
+**
+** It is ok for pVector to be a scalar (as long as iField==0).
+** In that case, this routine works like sqlite3ExprDup().
+**
+** The caller owns the returned Expr object and is responsible for
+** ensuring that the returned value eventually gets freed.
+**
+** The caller retains ownership of pVector. If pVector is a TK_SELECT,
+** then the returned object will reference pVector and so pVector must remain
+** valid for the life of the returned object. If pVector is a TK_VECTOR
+** or a scalar expression, then it can be deleted as soon as this routine
+** returns.
+**
+** A trick to cause a TK_SELECT pVector to be deleted together with
+** the returned Expr object is to attach the pVector to the pRight field
+** of the returned TK_SELECT_COLUMN Expr object.
+*/
+SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(
+ Parse *pParse, /* Parsing context */
+ Expr *pVector, /* The vector. List of expressions or a sub-SELECT */
+ int iField /* Which column of the vector to return */
+){
+ Expr *pRet;
+ if( pVector->op==TK_SELECT ){
+ assert( pVector->flags & EP_xIsSelect );
+ /* The TK_SELECT_COLUMN Expr node:
+ **
+ ** pLeft: pVector containing TK_SELECT. Not deleted.
+ ** pRight: not used. But recursively deleted.
+ ** iColumn: Index of a column in pVector
+ ** iTable: 0 or the number of columns on the LHS of an assignment
+ ** pLeft->iTable: First in an array of register holding result, or 0
+ ** if the result is not yet computed.
+ **
+ ** sqlite3ExprDelete() specifically skips the recursive delete of
+ ** pLeft on TK_SELECT_COLUMN nodes. But pRight is followed, so pVector
+ ** can be attached to pRight to cause this node to take ownership of
+ ** pVector. Typically there will be multiple TK_SELECT_COLUMN nodes
+ ** with the same pLeft pointer to the pVector, but only one of them
+ ** will own the pVector.
+ */
+ pRet = sqlite3PExpr(pParse, TK_SELECT_COLUMN, 0, 0);
+ if( pRet ){
+ pRet->iColumn = iField;
+ pRet->pLeft = pVector;
+ }
+ assert( pRet==0 || pRet->iTable==0 );
+ }else{
+ if( pVector->op==TK_VECTOR ) pVector = pVector->x.pList->a[iField].pExpr;
+ pRet = sqlite3ExprDup(pParse->db, pVector, 0);
+ }
+ return pRet;
+}
+
+/*
+** If expression pExpr is of type TK_SELECT, generate code to evaluate
+** it. Return the register in which the result is stored (or, if the
+** sub-select returns more than one column, the first in an array
+** of registers in which the result is stored).
+**
+** If pExpr is not a TK_SELECT expression, return 0.
+*/
+static int exprCodeSubselect(Parse *pParse, Expr *pExpr){
+ int reg = 0;
+#ifndef SQLITE_OMIT_SUBQUERY
+ if( pExpr->op==TK_SELECT ){
+ reg = sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+ }
+#endif
+ return reg;
+}
+
+/*
+** Argument pVector points to a vector expression - either a TK_VECTOR
+** or TK_SELECT that returns more than one column. This function returns
+** the register number of a register that contains the value of
+** element iField of the vector.
+**
+** If pVector is a TK_SELECT expression, then code for it must have
+** already been generated using the exprCodeSubselect() routine. In this
+** case parameter regSelect should be the first in an array of registers
+** containing the results of the sub-select.
+**
+** If pVector is of type TK_VECTOR, then code for the requested field
+** is generated. In this case (*pRegFree) may be set to the number of
+** a temporary register to be freed by the caller before returning.
+**
+** Before returning, output parameter (*ppExpr) is set to point to the
+** Expr object corresponding to element iElem of the vector.
+*/
+static int exprVectorRegister(
+ Parse *pParse, /* Parse context */
+ Expr *pVector, /* Vector to extract element from */
+ int iField, /* Field to extract from pVector */
+ int regSelect, /* First in array of registers */
+ Expr **ppExpr, /* OUT: Expression element */
+ int *pRegFree /* OUT: Temp register to free */
+){
+ u8 op = pVector->op;
+ assert( op==TK_VECTOR || op==TK_REGISTER || op==TK_SELECT );
+ if( op==TK_REGISTER ){
+ *ppExpr = sqlite3VectorFieldSubexpr(pVector, iField);
+ return pVector->iTable+iField;
+ }
+ if( op==TK_SELECT ){
+ *ppExpr = pVector->x.pSelect->pEList->a[iField].pExpr;
+ return regSelect+iField;
+ }
+ *ppExpr = pVector->x.pList->a[iField].pExpr;
+ return sqlite3ExprCodeTemp(pParse, *ppExpr, pRegFree);
+}
+
+/*
+** Expression pExpr is a comparison between two vector values. Compute
+** the result of the comparison (1, 0, or NULL) and write that
+** result into register dest.
+**
+** The caller must satisfy the following preconditions:
+**
+** if pExpr->op==TK_IS: op==TK_EQ and p5==SQLITE_NULLEQ
+** if pExpr->op==TK_ISNOT: op==TK_NE and p5==SQLITE_NULLEQ
+** otherwise: op==pExpr->op and p5==0
+*/
+static void codeVectorCompare(
+ Parse *pParse, /* Code generator context */
+ Expr *pExpr, /* The comparison operation */
+ int dest, /* Write results into this register */
+ u8 op, /* Comparison operator */
+ u8 p5 /* SQLITE_NULLEQ or zero */
+){
+ Vdbe *v = pParse->pVdbe;
+ Expr *pLeft = pExpr->pLeft;
+ Expr *pRight = pExpr->pRight;
+ int nLeft = sqlite3ExprVectorSize(pLeft);
+ int i;
+ int regLeft = 0;
+ int regRight = 0;
+ u8 opx = op;
+ int addrDone = sqlite3VdbeMakeLabel(v);
+
+ if( nLeft!=sqlite3ExprVectorSize(pRight) ){
+ sqlite3ErrorMsg(pParse, "row value misused");
+ return;
+ }
+ assert( pExpr->op==TK_EQ || pExpr->op==TK_NE
+ || pExpr->op==TK_IS || pExpr->op==TK_ISNOT
+ || pExpr->op==TK_LT || pExpr->op==TK_GT
+ || pExpr->op==TK_LE || pExpr->op==TK_GE
+ );
+ assert( pExpr->op==op || (pExpr->op==TK_IS && op==TK_EQ)
+ || (pExpr->op==TK_ISNOT && op==TK_NE) );
+ assert( p5==0 || pExpr->op!=op );
+ assert( p5==SQLITE_NULLEQ || pExpr->op==op );
+
+ p5 |= SQLITE_STOREP2;
+ if( opx==TK_LE ) opx = TK_LT;
+ if( opx==TK_GE ) opx = TK_GT;
+
+ regLeft = exprCodeSubselect(pParse, pLeft);
+ regRight = exprCodeSubselect(pParse, pRight);
+
+ for(i=0; 1 /*Loop exits by "break"*/; i++){
+ int regFree1 = 0, regFree2 = 0;
+ Expr *pL, *pR;
+ int r1, r2;
+ assert( i>=0 && i<nLeft );
+ if( i>0 ) sqlite3ExprCachePush(pParse);
+ r1 = exprVectorRegister(pParse, pLeft, i, regLeft, &pL, ®Free1);
+ r2 = exprVectorRegister(pParse, pRight, i, regRight, &pR, ®Free2);
+ codeCompare(pParse, pL, pR, opx, r1, r2, dest, p5);
+ testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
+ testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
+ testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
+ testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
+ testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
+ testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
+ sqlite3ReleaseTempReg(pParse, regFree1);
+ sqlite3ReleaseTempReg(pParse, regFree2);
+ if( i>0 ) sqlite3ExprCachePop(pParse);
+ if( i==nLeft-1 ){
+ break;
+ }
+ if( opx==TK_EQ ){
+ sqlite3VdbeAddOp2(v, OP_IfNot, dest, addrDone); VdbeCoverage(v);
+ p5 |= SQLITE_KEEPNULL;
+ }else if( opx==TK_NE ){
+ sqlite3VdbeAddOp2(v, OP_If, dest, addrDone); VdbeCoverage(v);
+ p5 |= SQLITE_KEEPNULL;
+ }else{
+ assert( op==TK_LT || op==TK_GT || op==TK_LE || op==TK_GE );
+ sqlite3VdbeAddOp2(v, OP_ElseNotEq, 0, addrDone);
+ VdbeCoverageIf(v, op==TK_LT);
+ VdbeCoverageIf(v, op==TK_GT);
+ VdbeCoverageIf(v, op==TK_LE);
+ VdbeCoverageIf(v, op==TK_GE);
+ if( i==nLeft-2 ) opx = op;
+ }
+ }
+ sqlite3VdbeResolveLabel(v, addrDone);
+}
+
#if SQLITE_MAX_EXPR_DEPTH>0
/*
** Check that argument nHeight is less than or equal to the maximum
}
}
}
-static void heightOfSelect(Select *p, int *pnHeight){
- if( p ){
+static void heightOfSelect(Select *pSelect, int *pnHeight){
+ Select *p;
+ for(p=pSelect; p; p=p->pPrior){
heightOfExpr(p->pWhere, pnHeight);
heightOfExpr(p->pHaving, pnHeight);
heightOfExpr(p->pLimit, pnHeight);
- heightOfExpr(p->pOffset, pnHeight);
heightOfExprList(p->pEList, pnHeight);
heightOfExprList(p->pGroupBy, pnHeight);
heightOfExprList(p->pOrderBy, pnHeight);
- heightOfSelect(p->pPrior, pnHeight);
}
}
** is allocated to hold the integer text and the dequote flag is ignored.
*/
SQLITE_PRIVATE Expr *sqlite3ExprAlloc(
- sqlite3 *db, /* Handle for sqlite3DbMallocZero() (may be null) */
+ sqlite3 *db, /* Handle for sqlite3DbMallocRawNN() */
int op, /* Expression opcode */
const Token *pToken, /* Token argument. Might be NULL */
int dequote /* True to dequote */
int nExtra = 0;
int iValue = 0;
+ assert( db!=0 );
if( pToken ){
if( op!=TK_INTEGER || pToken->z==0
|| sqlite3GetInt32(pToken->z, &iValue)==0 ){
assert( iValue>=0 );
}
}
- pNew = sqlite3DbMallocZero(db, sizeof(Expr)+nExtra);
+ pNew = sqlite3DbMallocRawNN(db, sizeof(Expr)+nExtra);
if( pNew ){
+ memset(pNew, 0, sizeof(Expr));
pNew->op = (u8)op;
pNew->iAgg = -1;
if( pToken ){
if( nExtra==0 ){
- pNew->flags |= EP_IntValue;
+ pNew->flags |= EP_IntValue|EP_Leaf;
pNew->u.iValue = iValue;
}else{
- int c;
pNew->u.zToken = (char*)&pNew[1];
assert( pToken->z!=0 || pToken->n==0 );
if( pToken->n ) memcpy(pNew->u.zToken, pToken->z, pToken->n);
pNew->u.zToken[pToken->n] = 0;
- if( dequote && nExtra>=3
- && ((c = pToken->z[0])=='\'' || c=='"' || c=='[' || c=='`') ){
+ if( dequote && sqlite3Isquote(pNew->u.zToken[0]) ){
+ if( pNew->u.zToken[0]=='"' ) pNew->flags |= EP_DblQuoted;
sqlite3Dequote(pNew->u.zToken);
- if( c=='"' ) pNew->flags |= EP_DblQuoted;
}
}
}
){
Token x;
x.z = zToken;
- x.n = zToken ? sqlite3Strlen30(zToken) : 0;
+ x.n = sqlite3Strlen30(zToken);
return sqlite3ExprAlloc(db, op, &x, 0);
}
Parse *pParse, /* Parsing context */
int op, /* Expression opcode */
Expr *pLeft, /* Left operand */
- Expr *pRight, /* Right operand */
- const Token *pToken /* Argument token */
+ Expr *pRight /* Right operand */
){
Expr *p;
- if( op==TK_AND && pLeft && pRight && pParse->nErr==0 ){
+ if( op==TK_AND && pParse->nErr==0 ){
/* Take advantage of short-circuit false optimization for AND */
p = sqlite3ExprAnd(pParse->db, pLeft, pRight);
}else{
- p = sqlite3ExprAlloc(pParse->db, op, pToken, 1);
+ p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr));
+ if( p ){
+ memset(p, 0, sizeof(Expr));
+ p->op = op & TKFLG_MASK;
+ p->iAgg = -1;
+ }
sqlite3ExprAttachSubtrees(pParse->db, p, pLeft, pRight);
}
if( p ) {
return p;
}
+/*
+** Add pSelect to the Expr.x.pSelect field. Or, if pExpr is NULL (due
+** do a memory allocation failure) then delete the pSelect object.
+*/
+SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse *pParse, Expr *pExpr, Select *pSelect){
+ if( pExpr ){
+ pExpr->x.pSelect = pSelect;
+ ExprSetProperty(pExpr, EP_xIsSelect|EP_Subquery);
+ sqlite3ExprSetHeightAndFlags(pParse, pExpr);
+ }else{
+ assert( pParse->db->mallocFailed );
+ sqlite3SelectDelete(pParse->db, pSelect);
+ }
+}
+
+
/*
** If the expression is always either TRUE or FALSE (respectively),
** then return 1. If one cannot determine the truth value of the
return 0;
}
pNew->x.pList = pList;
+ ExprSetProperty(pNew, EP_HasFunc);
assert( !ExprHasProperty(pNew, EP_xIsSelect) );
sqlite3ExprSetHeightAndFlags(pParse, pNew);
return pNew;
** variable number.
**
** Wildcards of the form "?nnn" are assigned the number "nnn". We make
-** sure "nnn" is not too be to avoid a denial of service attack when
+** sure "nnn" is not too big to avoid a denial of service attack when
** the SQL statement comes from an external source.
**
** Wildcards of the form ":aaa", "@aaa", or "$aaa" are assigned the same number
** instance of the wildcard, the next sequential variable number is
** assigned.
*/
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr){
+SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr, u32 n){
sqlite3 *db = pParse->db;
const char *z;
+ ynVar x;
if( pExpr==0 ) return;
assert( !ExprHasProperty(pExpr, EP_IntValue|EP_Reduced|EP_TokenOnly) );
z = pExpr->u.zToken;
assert( z!=0 );
assert( z[0]!=0 );
+ assert( n==(u32)sqlite3Strlen30(z) );
if( z[1]==0 ){
/* Wildcard of the form "?". Assign the next variable number */
assert( z[0]=='?' );
- pExpr->iColumn = (ynVar)(++pParse->nVar);
+ x = (ynVar)(++pParse->nVar);
}else{
- ynVar x = 0;
- u32 n = sqlite3Strlen30(z);
+ int doAdd = 0;
if( z[0]=='?' ){
/* Wildcard of the form "?nnn". Convert "nnn" to an integer and
** use it as the variable number */
i64 i;
- int bOk = 0==sqlite3Atoi64(&z[1], &i, n-1, SQLITE_UTF8);
- pExpr->iColumn = x = (ynVar)i;
+ int bOk;
+ if( n==2 ){ /*OPTIMIZATION-IF-TRUE*/
+ i = z[1]-'0'; /* The common case of ?N for a single digit N */
+ bOk = 1;
+ }else{
+ bOk = 0==sqlite3Atoi64(&z[1], &i, n-1, SQLITE_UTF8);
+ }
testcase( i==0 );
testcase( i==1 );
testcase( i==db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]-1 );
if( bOk==0 || i<1 || i>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
sqlite3ErrorMsg(pParse, "variable number must be between ?1 and ?%d",
db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER]);
- x = 0;
+ return;
}
- if( i>pParse->nVar ){
- pParse->nVar = (int)i;
+ x = (ynVar)i;
+ if( x>pParse->nVar ){
+ pParse->nVar = (int)x;
+ doAdd = 1;
+ }else if( sqlite3VListNumToName(pParse->pVList, x)==0 ){
+ doAdd = 1;
}
}else{
/* Wildcards like ":aaa", "$aaa" or "@aaa". Reuse the same variable
** number as the prior appearance of the same name, or if the name
** has never appeared before, reuse the same variable number
*/
- ynVar i;
- for(i=0; i<pParse->nzVar; i++){
- if( pParse->azVar[i] && strcmp(pParse->azVar[i],z)==0 ){
- pExpr->iColumn = x = (ynVar)i+1;
- break;
- }
+ x = (ynVar)sqlite3VListNameToNum(pParse->pVList, z, n);
+ if( x==0 ){
+ x = (ynVar)(++pParse->nVar);
+ doAdd = 1;
}
- if( x==0 ) x = pExpr->iColumn = (ynVar)(++pParse->nVar);
}
- if( x>0 ){
- if( x>pParse->nzVar ){
- char **a;
- a = sqlite3DbRealloc(db, pParse->azVar, x*sizeof(a[0]));
- if( a==0 ) return; /* Error reported through db->mallocFailed */
- pParse->azVar = a;
- memset(&a[pParse->nzVar], 0, (x-pParse->nzVar)*sizeof(a[0]));
- pParse->nzVar = x;
- }
- if( z[0]!='?' || pParse->azVar[x-1]==0 ){
- sqlite3DbFree(db, pParse->azVar[x-1]);
- pParse->azVar[x-1] = sqlite3DbStrNDup(db, z, n);
- }
+ if( doAdd ){
+ pParse->pVList = sqlite3VListAdd(db, pParse->pVList, z, n, x);
}
- }
- if( !pParse->nErr && pParse->nVar>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
+ }
+ pExpr->iColumn = x;
+ if( x>db->aLimit[SQLITE_LIMIT_VARIABLE_NUMBER] ){
sqlite3ErrorMsg(pParse, "too many SQL variables");
}
}
/*
** Recursively delete an expression tree.
*/
-SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3 *db, Expr *p){
- if( p==0 ) return;
+static SQLITE_NOINLINE void sqlite3ExprDeleteNN(sqlite3 *db, Expr *p){
+ assert( p!=0 );
/* Sanity check: Assert that the IntValue is non-negative if it exists */
assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 );
- if( !ExprHasProperty(p, EP_TokenOnly) ){
+#ifdef SQLITE_DEBUG
+ if( ExprHasProperty(p, EP_Leaf) && !ExprHasProperty(p, EP_TokenOnly) ){
+ assert( p->pLeft==0 );
+ assert( p->pRight==0 );
+ assert( p->x.pSelect==0 );
+ }
+#endif
+ if( !ExprHasProperty(p, (EP_TokenOnly|EP_Leaf)) ){
/* The Expr.x union is never used at the same time as Expr.pRight */
assert( p->x.pList==0 || p->pRight==0 );
- sqlite3ExprDelete(db, p->pLeft);
- sqlite3ExprDelete(db, p->pRight);
- if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken);
- if( ExprHasProperty(p, EP_xIsSelect) ){
+ if( p->pLeft && p->op!=TK_SELECT_COLUMN ) sqlite3ExprDeleteNN(db, p->pLeft);
+ if( p->pRight ){
+ sqlite3ExprDeleteNN(db, p->pRight);
+ }else if( ExprHasProperty(p, EP_xIsSelect) ){
sqlite3SelectDelete(db, p->x.pSelect);
}else{
sqlite3ExprListDelete(db, p->x.pList);
}
}
+ if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken);
if( !ExprHasProperty(p, EP_Static) ){
- sqlite3DbFree(db, p);
+ sqlite3DbFreeNN(db, p);
}
}
+SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3 *db, Expr *p){
+ if( p ) sqlite3ExprDeleteNN(db, p);
+}
/*
** Return the number of bytes allocated for the expression structure
assert( flags==EXPRDUP_REDUCE || flags==0 ); /* Only one flag value allowed */
assert( EXPR_FULLSIZE<=0xfff );
assert( (0xfff & (EP_Reduced|EP_TokenOnly))==0 );
- if( 0==(flags&EXPRDUP_REDUCE) ){
+ if( 0==flags || p->op==TK_SELECT_COLUMN ){
nSize = EXPR_FULLSIZE;
}else{
assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) );
** if any. Before returning, *pzBuffer is set to the first byte past the
** portion of the buffer copied into by this function.
*/
-static Expr *exprDup(sqlite3 *db, Expr *p, int flags, u8 **pzBuffer){
- Expr *pNew = 0; /* Value to return */
- if( p ){
- const int isReduced = (flags&EXPRDUP_REDUCE);
- u8 *zAlloc;
- u32 staticFlag = 0;
+static Expr *exprDup(sqlite3 *db, Expr *p, int dupFlags, u8 **pzBuffer){
+ Expr *pNew; /* Value to return */
+ u8 *zAlloc; /* Memory space from which to build Expr object */
+ u32 staticFlag; /* EP_Static if space not obtained from malloc */
- assert( pzBuffer==0 || isReduced );
+ assert( db!=0 );
+ assert( p );
+ assert( dupFlags==0 || dupFlags==EXPRDUP_REDUCE );
+ assert( pzBuffer==0 || dupFlags==EXPRDUP_REDUCE );
- /* Figure out where to write the new Expr structure. */
- if( pzBuffer ){
- zAlloc = *pzBuffer;
- staticFlag = EP_Static;
+ /* Figure out where to write the new Expr structure. */
+ if( pzBuffer ){
+ zAlloc = *pzBuffer;
+ staticFlag = EP_Static;
+ }else{
+ zAlloc = sqlite3DbMallocRawNN(db, dupedExprSize(p, dupFlags));
+ staticFlag = 0;
+ }
+ pNew = (Expr *)zAlloc;
+
+ if( pNew ){
+ /* Set nNewSize to the size allocated for the structure pointed to
+ ** by pNew. This is either EXPR_FULLSIZE, EXPR_REDUCEDSIZE or
+ ** EXPR_TOKENONLYSIZE. nToken is set to the number of bytes consumed
+ ** by the copy of the p->u.zToken string (if any).
+ */
+ const unsigned nStructSize = dupedExprStructSize(p, dupFlags);
+ const int nNewSize = nStructSize & 0xfff;
+ int nToken;
+ if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){
+ nToken = sqlite3Strlen30(p->u.zToken) + 1;
}else{
- zAlloc = sqlite3DbMallocRaw(db, dupedExprSize(p, flags));
+ nToken = 0;
}
- pNew = (Expr *)zAlloc;
-
- if( pNew ){
- /* Set nNewSize to the size allocated for the structure pointed to
- ** by pNew. This is either EXPR_FULLSIZE, EXPR_REDUCEDSIZE or
- ** EXPR_TOKENONLYSIZE. nToken is set to the number of bytes consumed
- ** by the copy of the p->u.zToken string (if any).
- */
- const unsigned nStructSize = dupedExprStructSize(p, flags);
- const int nNewSize = nStructSize & 0xfff;
- int nToken;
- if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){
- nToken = sqlite3Strlen30(p->u.zToken) + 1;
- }else{
- nToken = 0;
- }
- if( isReduced ){
- assert( ExprHasProperty(p, EP_Reduced)==0 );
- memcpy(zAlloc, p, nNewSize);
- }else{
- int nSize = exprStructSize(p);
- memcpy(zAlloc, p, nSize);
+ if( dupFlags ){
+ assert( ExprHasProperty(p, EP_Reduced)==0 );
+ memcpy(zAlloc, p, nNewSize);
+ }else{
+ u32 nSize = (u32)exprStructSize(p);
+ memcpy(zAlloc, p, nSize);
+ if( nSize<EXPR_FULLSIZE ){
memset(&zAlloc[nSize], 0, EXPR_FULLSIZE-nSize);
}
+ }
- /* Set the EP_Reduced, EP_TokenOnly, and EP_Static flags appropriately. */
- pNew->flags &= ~(EP_Reduced|EP_TokenOnly|EP_Static|EP_MemToken);
- pNew->flags |= nStructSize & (EP_Reduced|EP_TokenOnly);
- pNew->flags |= staticFlag;
+ /* Set the EP_Reduced, EP_TokenOnly, and EP_Static flags appropriately. */
+ pNew->flags &= ~(EP_Reduced|EP_TokenOnly|EP_Static|EP_MemToken);
+ pNew->flags |= nStructSize & (EP_Reduced|EP_TokenOnly);
+ pNew->flags |= staticFlag;
- /* Copy the p->u.zToken string, if any. */
- if( nToken ){
- char *zToken = pNew->u.zToken = (char*)&zAlloc[nNewSize];
- memcpy(zToken, p->u.zToken, nToken);
- }
+ /* Copy the p->u.zToken string, if any. */
+ if( nToken ){
+ char *zToken = pNew->u.zToken = (char*)&zAlloc[nNewSize];
+ memcpy(zToken, p->u.zToken, nToken);
+ }
- if( 0==((p->flags|pNew->flags) & EP_TokenOnly) ){
- /* Fill in the pNew->x.pSelect or pNew->x.pList member. */
- if( ExprHasProperty(p, EP_xIsSelect) ){
- pNew->x.pSelect = sqlite3SelectDup(db, p->x.pSelect, isReduced);
- }else{
- pNew->x.pList = sqlite3ExprListDup(db, p->x.pList, isReduced);
- }
+ if( 0==((p->flags|pNew->flags) & (EP_TokenOnly|EP_Leaf)) ){
+ /* Fill in the pNew->x.pSelect or pNew->x.pList member. */
+ if( ExprHasProperty(p, EP_xIsSelect) ){
+ pNew->x.pSelect = sqlite3SelectDup(db, p->x.pSelect, dupFlags);
+ }else{
+ pNew->x.pList = sqlite3ExprListDup(db, p->x.pList, dupFlags);
}
+ }
- /* Fill in pNew->pLeft and pNew->pRight. */
- if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly) ){
- zAlloc += dupedExprNodeSize(p, flags);
- if( ExprHasProperty(pNew, EP_Reduced) ){
- pNew->pLeft = exprDup(db, p->pLeft, EXPRDUP_REDUCE, &zAlloc);
- pNew->pRight = exprDup(db, p->pRight, EXPRDUP_REDUCE, &zAlloc);
- }
- if( pzBuffer ){
- *pzBuffer = zAlloc;
- }
- }else{
- if( !ExprHasProperty(p, EP_TokenOnly) ){
+ /* Fill in pNew->pLeft and pNew->pRight. */
+ if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly) ){
+ zAlloc += dupedExprNodeSize(p, dupFlags);
+ if( !ExprHasProperty(pNew, EP_TokenOnly|EP_Leaf) ){
+ pNew->pLeft = p->pLeft ?
+ exprDup(db, p->pLeft, EXPRDUP_REDUCE, &zAlloc) : 0;
+ pNew->pRight = p->pRight ?
+ exprDup(db, p->pRight, EXPRDUP_REDUCE, &zAlloc) : 0;
+ }
+ if( pzBuffer ){
+ *pzBuffer = zAlloc;
+ }
+ }else{
+ if( !ExprHasProperty(p, EP_TokenOnly|EP_Leaf) ){
+ if( pNew->op==TK_SELECT_COLUMN ){
+ pNew->pLeft = p->pLeft;
+ assert( p->iColumn==0 || p->pRight==0 );
+ assert( p->pRight==0 || p->pRight==p->pLeft );
+ }else{
pNew->pLeft = sqlite3ExprDup(db, p->pLeft, 0);
- pNew->pRight = sqlite3ExprDup(db, p->pRight, 0);
}
+ pNew->pRight = sqlite3ExprDup(db, p->pRight, 0);
}
-
}
}
return pNew;
** part of the in-memory representation of the database schema.
*/
SQLITE_PRIVATE Expr *sqlite3ExprDup(sqlite3 *db, Expr *p, int flags){
- return exprDup(db, p, flags, 0);
+ assert( flags==0 || flags==EXPRDUP_REDUCE );
+ return p ? exprDup(db, p, flags, 0) : 0;
}
SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3 *db, ExprList *p, int flags){
ExprList *pNew;
struct ExprList_item *pItem, *pOldItem;
int i;
+ Expr *pPriorSelectCol = 0;
+ assert( db!=0 );
if( p==0 ) return 0;
- pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) );
+ pNew = sqlite3DbMallocRawNN(db, sqlite3DbMallocSize(db, p));
if( pNew==0 ) return 0;
- pNew->nExpr = i = p->nExpr;
- if( (flags & EXPRDUP_REDUCE)==0 ) for(i=1; i<p->nExpr; i+=i){}
- pNew->a = pItem = sqlite3DbMallocRaw(db, i*sizeof(p->a[0]) );
- if( pItem==0 ){
- sqlite3DbFree(db, pNew);
- return 0;
- }
+ pNew->nExpr = p->nExpr;
+ pItem = pNew->a;
pOldItem = p->a;
for(i=0; i<p->nExpr; i++, pItem++, pOldItem++){
Expr *pOldExpr = pOldItem->pExpr;
+ Expr *pNewExpr;
pItem->pExpr = sqlite3ExprDup(db, pOldExpr, flags);
+ if( pOldExpr
+ && pOldExpr->op==TK_SELECT_COLUMN
+ && (pNewExpr = pItem->pExpr)!=0
+ ){
+ assert( pNewExpr->iColumn==0 || i>0 );
+ if( pNewExpr->iColumn==0 ){
+ assert( pOldExpr->pLeft==pOldExpr->pRight );
+ pPriorSelectCol = pNewExpr->pLeft = pNewExpr->pRight;
+ }else{
+ assert( i>0 );
+ assert( pItem[-1].pExpr!=0 );
+ assert( pNewExpr->iColumn==pItem[-1].pExpr->iColumn+1 );
+ assert( pPriorSelectCol==pItem[-1].pExpr->pLeft );
+ pNewExpr->pLeft = pPriorSelectCol;
+ }
+ }
pItem->zName = sqlite3DbStrDup(db, pOldItem->zName);
pItem->zSpan = sqlite3DbStrDup(db, pOldItem->zSpan);
pItem->sortOrder = pOldItem->sortOrder;
SrcList *pNew;
int i;
int nByte;
+ assert( db!=0 );
if( p==0 ) return 0;
nByte = sizeof(*p) + (p->nSrc>0 ? sizeof(p->a[0]) * (p->nSrc-1) : 0);
- pNew = sqlite3DbMallocRaw(db, nByte );
+ pNew = sqlite3DbMallocRawNN(db, nByte );
if( pNew==0 ) return 0;
pNew->nSrc = pNew->nAlloc = p->nSrc;
for(i=0; i<p->nSrc; i++){
}
pTab = pNewItem->pTab = pOldItem->pTab;
if( pTab ){
- pTab->nRef++;
+ pTab->nTabRef++;
}
pNewItem->pSelect = sqlite3SelectDup(db, pOldItem->pSelect, flags);
pNewItem->pOn = sqlite3ExprDup(db, pOldItem->pOn, flags);
SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3 *db, IdList *p){
IdList *pNew;
int i;
+ assert( db!=0 );
if( p==0 ) return 0;
- pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) );
+ pNew = sqlite3DbMallocRawNN(db, sizeof(*pNew) );
if( pNew==0 ) return 0;
pNew->nId = p->nId;
- pNew->a = sqlite3DbMallocRaw(db, p->nId*sizeof(p->a[0]) );
+ pNew->a = sqlite3DbMallocRawNN(db, p->nId*sizeof(p->a[0]) );
if( pNew->a==0 ){
- sqlite3DbFree(db, pNew);
+ sqlite3DbFreeNN(db, pNew);
return 0;
}
/* Note that because the size of the allocation for p->a[] is not
}
return pNew;
}
-SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){
- Select *pNew, *pPrior;
- if( p==0 ) return 0;
- pNew = sqlite3DbMallocRaw(db, sizeof(*p) );
- if( pNew==0 ) return 0;
- pNew->pEList = sqlite3ExprListDup(db, p->pEList, flags);
- pNew->pSrc = sqlite3SrcListDup(db, p->pSrc, flags);
- pNew->pWhere = sqlite3ExprDup(db, p->pWhere, flags);
- pNew->pGroupBy = sqlite3ExprListDup(db, p->pGroupBy, flags);
- pNew->pHaving = sqlite3ExprDup(db, p->pHaving, flags);
- pNew->pOrderBy = sqlite3ExprListDup(db, p->pOrderBy, flags);
- pNew->op = p->op;
- pNew->pPrior = pPrior = sqlite3SelectDup(db, p->pPrior, flags);
- if( pPrior ) pPrior->pNext = pNew;
- pNew->pNext = 0;
- pNew->pLimit = sqlite3ExprDup(db, p->pLimit, flags);
- pNew->pOffset = sqlite3ExprDup(db, p->pOffset, flags);
- pNew->iLimit = 0;
- pNew->iOffset = 0;
- pNew->selFlags = p->selFlags & ~SF_UsesEphemeral;
- pNew->addrOpenEphm[0] = -1;
- pNew->addrOpenEphm[1] = -1;
- pNew->nSelectRow = p->nSelectRow;
- pNew->pWith = withDup(db, p->pWith);
- sqlite3SelectSetName(pNew, p->zSelName);
- return pNew;
+SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *pDup, int flags){
+ Select *pRet = 0;
+ Select *pNext = 0;
+ Select **pp = &pRet;
+ Select *p;
+
+ assert( db!=0 );
+ for(p=pDup; p; p=p->pPrior){
+ Select *pNew = sqlite3DbMallocRawNN(db, sizeof(*p) );
+ if( pNew==0 ) break;
+ pNew->pEList = sqlite3ExprListDup(db, p->pEList, flags);
+ pNew->pSrc = sqlite3SrcListDup(db, p->pSrc, flags);
+ pNew->pWhere = sqlite3ExprDup(db, p->pWhere, flags);
+ pNew->pGroupBy = sqlite3ExprListDup(db, p->pGroupBy, flags);
+ pNew->pHaving = sqlite3ExprDup(db, p->pHaving, flags);
+ pNew->pOrderBy = sqlite3ExprListDup(db, p->pOrderBy, flags);
+ pNew->op = p->op;
+ pNew->pNext = pNext;
+ pNew->pPrior = 0;
+ pNew->pLimit = sqlite3ExprDup(db, p->pLimit, flags);
+ pNew->iLimit = 0;
+ pNew->iOffset = 0;
+ pNew->selFlags = p->selFlags & ~SF_UsesEphemeral;
+ pNew->addrOpenEphm[0] = -1;
+ pNew->addrOpenEphm[1] = -1;
+ pNew->nSelectRow = p->nSelectRow;
+ pNew->pWith = withDup(db, p->pWith);
+ sqlite3SelectSetName(pNew, p->zSelName);
+ *pp = pNew;
+ pp = &pNew->pPrior;
+ pNext = pNew;
+ }
+
+ return pRet;
}
#else
SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){
** Add a new element to the end of an expression list. If pList is
** initially NULL, then create a new expression list.
**
+** The pList argument must be either NULL or a pointer to an ExprList
+** obtained from a prior call to sqlite3ExprListAppend(). This routine
+** may not be used with an ExprList obtained from sqlite3ExprListDup().
+** Reason: This routine assumes that the number of slots in pList->a[]
+** is a power of two. That is true for sqlite3ExprListAppend() returns
+** but is not necessarily true from the return value of sqlite3ExprListDup().
+**
** If a memory allocation error occurs, the entire list is freed and
** NULL is returned. If non-NULL is returned, then it is guaranteed
** that the new entry was successfully appended.
ExprList *pList, /* List to which to append. Might be NULL */
Expr *pExpr /* Expression to be appended. Might be NULL */
){
+ struct ExprList_item *pItem;
sqlite3 *db = pParse->db;
+ assert( db!=0 );
if( pList==0 ){
- pList = sqlite3DbMallocZero(db, sizeof(ExprList) );
+ pList = sqlite3DbMallocRawNN(db, sizeof(ExprList) );
if( pList==0 ){
goto no_mem;
}
- pList->a = sqlite3DbMallocRaw(db, sizeof(pList->a[0]));
- if( pList->a==0 ) goto no_mem;
+ pList->nExpr = 0;
}else if( (pList->nExpr & (pList->nExpr-1))==0 ){
- struct ExprList_item *a;
- assert( pList->nExpr>0 );
- a = sqlite3DbRealloc(db, pList->a, pList->nExpr*2*sizeof(pList->a[0]));
- if( a==0 ){
+ ExprList *pNew;
+ pNew = sqlite3DbRealloc(db, pList,
+ sizeof(*pList)+(2*pList->nExpr - 1)*sizeof(pList->a[0]));
+ if( pNew==0 ){
goto no_mem;
}
- pList->a = a;
- }
- assert( pList->a!=0 );
- if( 1 ){
- struct ExprList_item *pItem = &pList->a[pList->nExpr++];
- memset(pItem, 0, sizeof(*pItem));
- pItem->pExpr = pExpr;
+ pList = pNew;
}
+ pItem = &pList->a[pList->nExpr++];
+ assert( offsetof(struct ExprList_item,zName)==sizeof(pItem->pExpr) );
+ assert( offsetof(struct ExprList_item,pExpr)==0 );
+ memset(&pItem->zName,0,sizeof(*pItem)-offsetof(struct ExprList_item,zName));
+ pItem->pExpr = pExpr;
return pList;
no_mem:
return 0;
}
+/*
+** pColumns and pExpr form a vector assignment which is part of the SET
+** clause of an UPDATE statement. Like this:
+**
+** (a,b,c) = (expr1,expr2,expr3)
+** Or: (a,b,c) = (SELECT x,y,z FROM ....)
+**
+** For each term of the vector assignment, append new entries to the
+** expression list pList. In the case of a subquery on the RHS, append
+** TK_SELECT_COLUMN expressions.
+*/
+SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(
+ Parse *pParse, /* Parsing context */
+ ExprList *pList, /* List to which to append. Might be NULL */
+ IdList *pColumns, /* List of names of LHS of the assignment */
+ Expr *pExpr /* Vector expression to be appended. Might be NULL */
+){
+ sqlite3 *db = pParse->db;
+ int n;
+ int i;
+ int iFirst = pList ? pList->nExpr : 0;
+ /* pColumns can only be NULL due to an OOM but an OOM will cause an
+ ** exit prior to this routine being invoked */
+ if( NEVER(pColumns==0) ) goto vector_append_error;
+ if( pExpr==0 ) goto vector_append_error;
+
+ /* If the RHS is a vector, then we can immediately check to see that
+ ** the size of the RHS and LHS match. But if the RHS is a SELECT,
+ ** wildcards ("*") in the result set of the SELECT must be expanded before
+ ** we can do the size check, so defer the size check until code generation.
+ */
+ if( pExpr->op!=TK_SELECT && pColumns->nId!=(n=sqlite3ExprVectorSize(pExpr)) ){
+ sqlite3ErrorMsg(pParse, "%d columns assigned %d values",
+ pColumns->nId, n);
+ goto vector_append_error;
+ }
+
+ for(i=0; i<pColumns->nId; i++){
+ Expr *pSubExpr = sqlite3ExprForVectorField(pParse, pExpr, i);
+ pList = sqlite3ExprListAppend(pParse, pList, pSubExpr);
+ if( pList ){
+ assert( pList->nExpr==iFirst+i+1 );
+ pList->a[pList->nExpr-1].zName = pColumns->a[i].zName;
+ pColumns->a[i].zName = 0;
+ }
+ }
+
+ if( !db->mallocFailed && pExpr->op==TK_SELECT && ALWAYS(pList!=0) ){
+ Expr *pFirst = pList->a[iFirst].pExpr;
+ assert( pFirst!=0 );
+ assert( pFirst->op==TK_SELECT_COLUMN );
+
+ /* Store the SELECT statement in pRight so it will be deleted when
+ ** sqlite3ExprListDelete() is called */
+ pFirst->pRight = pExpr;
+ pExpr = 0;
+
+ /* Remember the size of the LHS in iTable so that we can check that
+ ** the RHS and LHS sizes match during code generation. */
+ pFirst->iTable = pColumns->nId;
+ }
+
+vector_append_error:
+ sqlite3ExprDelete(db, pExpr);
+ sqlite3IdListDelete(db, pColumns);
+ return pList;
+}
+
/*
** Set the sort order for the last element on the given ExprList.
*/
pItem = &pList->a[pList->nExpr-1];
assert( pItem->zName==0 );
pItem->zName = sqlite3DbStrNDup(pParse->db, pName->z, pName->n);
- if( dequote && pItem->zName ) sqlite3Dequote(pItem->zName);
+ if( dequote ) sqlite3Dequote(pItem->zName);
}
}
SQLITE_PRIVATE void sqlite3ExprListSetSpan(
Parse *pParse, /* Parsing context */
ExprList *pList, /* List to which to add the span. */
- ExprSpan *pSpan /* The span to be added */
+ const char *zStart, /* Start of the span */
+ const char *zEnd /* End of the span */
){
sqlite3 *db = pParse->db;
assert( pList!=0 || db->mallocFailed!=0 );
if( pList ){
struct ExprList_item *pItem = &pList->a[pList->nExpr-1];
assert( pList->nExpr>0 );
- assert( db->mallocFailed || pItem->pExpr==pSpan->pExpr );
sqlite3DbFree(db, pItem->zSpan);
- pItem->zSpan = sqlite3DbStrNDup(db, (char*)pSpan->zStart,
- (int)(pSpan->zEnd - pSpan->zStart));
+ pItem->zSpan = sqlite3DbSpanDup(db, zStart, zEnd);
}
}
/*
** Delete an entire expression list.
*/
-SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){
- int i;
- struct ExprList_item *pItem;
- if( pList==0 ) return;
- assert( pList->a!=0 || pList->nExpr==0 );
- for(pItem=pList->a, i=0; i<pList->nExpr; i++, pItem++){
+static SQLITE_NOINLINE void exprListDeleteNN(sqlite3 *db, ExprList *pList){
+ int i = pList->nExpr;
+ struct ExprList_item *pItem = pList->a;
+ assert( pList->nExpr>0 );
+ do{
sqlite3ExprDelete(db, pItem->pExpr);
sqlite3DbFree(db, pItem->zName);
sqlite3DbFree(db, pItem->zSpan);
- }
- sqlite3DbFree(db, pList->a);
- sqlite3DbFree(db, pList);
+ pItem++;
+ }while( --i>0 );
+ sqlite3DbFreeNN(db, pList);
+}
+SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){
+ if( pList ) exprListDeleteNN(db, pList);
}
/*
SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList *pList){
int i;
u32 m = 0;
- if( pList ){
- for(i=0; i<pList->nExpr; i++){
- Expr *pExpr = pList->a[i].pExpr;
- if( ALWAYS(pExpr) ) m |= pExpr->flags;
- }
+ assert( pList!=0 );
+ for(i=0; i<pList->nExpr; i++){
+ Expr *pExpr = pList->a[i].pExpr;
+ assert( pExpr!=0 );
+ m |= pExpr->flags;
}
return m;
}
+/*
+** This is a SELECT-node callback for the expression walker that
+** always "fails". By "fail" in this case, we mean set
+** pWalker->eCode to zero and abort.
+**
+** This callback is used by multiple expression walkers.
+*/
+SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker *pWalker, Select *NotUsed){
+ UNUSED_PARAMETER(NotUsed);
+ pWalker->eCode = 0;
+ return WRC_Abort;
+}
+
+/*
+** If the input expression is an ID with the name "true" or "false"
+** then convert it into an TK_TRUEFALSE term. Return non-zero if
+** the conversion happened, and zero if the expression is unaltered.
+*/
+SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr *pExpr){
+ assert( pExpr->op==TK_ID || pExpr->op==TK_STRING );
+ if( sqlite3StrICmp(pExpr->u.zToken, "true")==0
+ || sqlite3StrICmp(pExpr->u.zToken, "false")==0
+ ){
+ pExpr->op = TK_TRUEFALSE;
+ return 1;
+ }
+ return 0;
+}
+
+/*
+** The argument must be a TK_TRUEFALSE Expr node. Return 1 if it is TRUE
+** and 0 if it is FALSE.
+*/
+SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr *pExpr){
+ assert( pExpr->op==TK_TRUEFALSE );
+ assert( sqlite3StrICmp(pExpr->u.zToken,"true")==0
+ || sqlite3StrICmp(pExpr->u.zToken,"false")==0 );
+ return pExpr->u.zToken[4]==0;
+}
+
+
/*
** These routines are Walker callbacks used to check expressions to
** see if they are "constant" for some definition of constant. The
return WRC_Abort;
}
case TK_ID:
+ /* Convert "true" or "false" in a DEFAULT clause into the
+ ** appropriate TK_TRUEFALSE operator */
+ if( sqlite3ExprIdToTrueFalse(pExpr) ){
+ return WRC_Prune;
+ }
+ /* Fall thru */
case TK_COLUMN:
case TK_AGG_FUNCTION:
case TK_AGG_COLUMN:
testcase( pExpr->op==TK_AGG_COLUMN );
if( pWalker->eCode==3 && pExpr->iTable==pWalker->u.iCur ){
return WRC_Continue;
- }else{
- pWalker->eCode = 0;
- return WRC_Abort;
}
+ /* Fall through */
+ case TK_IF_NULL_ROW:
+ testcase( pExpr->op==TK_IF_NULL_ROW );
+ pWalker->eCode = 0;
+ return WRC_Abort;
case TK_VARIABLE:
if( pWalker->eCode==5 ){
/* Silently convert bound parameters that appear inside of CREATE
}
/* Fall through */
default:
- testcase( pExpr->op==TK_SELECT ); /* selectNodeIsConstant will disallow */
- testcase( pExpr->op==TK_EXISTS ); /* selectNodeIsConstant will disallow */
+ testcase( pExpr->op==TK_SELECT ); /* sqlite3SelectWalkFail will disallow */
+ testcase( pExpr->op==TK_EXISTS ); /* sqlite3SelectWalkFail will disallow */
return WRC_Continue;
}
}
-static int selectNodeIsConstant(Walker *pWalker, Select *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- pWalker->eCode = 0;
- return WRC_Abort;
-}
static int exprIsConst(Expr *p, int initFlag, int iCur){
Walker w;
- memset(&w, 0, sizeof(w));
w.eCode = initFlag;
w.xExprCallback = exprNodeIsConstant;
- w.xSelectCallback = selectNodeIsConstant;
+ w.xSelectCallback = sqlite3SelectWalkFail;
+#ifdef SQLITE_DEBUG
+ w.xSelectCallback2 = sqlite3SelectWalkAssert2;
+#endif
w.u.iCur = iCur;
sqlite3WalkExpr(&w, p);
return w.eCode;
return exprIsConst(p, 3, iCur);
}
+
+/*
+** sqlite3WalkExpr() callback used by sqlite3ExprIsConstantOrGroupBy().
+*/
+static int exprNodeIsConstantOrGroupBy(Walker *pWalker, Expr *pExpr){
+ ExprList *pGroupBy = pWalker->u.pGroupBy;
+ int i;
+
+ /* Check if pExpr is identical to any GROUP BY term. If so, consider
+ ** it constant. */
+ for(i=0; i<pGroupBy->nExpr; i++){
+ Expr *p = pGroupBy->a[i].pExpr;
+ if( sqlite3ExprCompare(0, pExpr, p, -1)<2 ){
+ CollSeq *pColl = sqlite3ExprNNCollSeq(pWalker->pParse, p);
+ if( sqlite3_stricmp("BINARY", pColl->zName)==0 ){
+ return WRC_Prune;
+ }
+ }
+ }
+
+ /* Check if pExpr is a sub-select. If so, consider it variable. */
+ if( ExprHasProperty(pExpr, EP_xIsSelect) ){
+ pWalker->eCode = 0;
+ return WRC_Abort;
+ }
+
+ return exprNodeIsConstant(pWalker, pExpr);
+}
+
+/*
+** Walk the expression tree passed as the first argument. Return non-zero
+** if the expression consists entirely of constants or copies of terms
+** in pGroupBy that sort with the BINARY collation sequence.
+**
+** This routine is used to determine if a term of the HAVING clause can
+** be promoted into the WHERE clause. In order for such a promotion to work,
+** the value of the HAVING clause term must be the same for all members of
+** a "group". The requirement that the GROUP BY term must be BINARY
+** assumes that no other collating sequence will have a finer-grained
+** grouping than binary. In other words (A=B COLLATE binary) implies
+** A=B in every other collating sequence. The requirement that the
+** GROUP BY be BINARY is stricter than necessary. It would also work
+** to promote HAVING clauses that use the same alternative collating
+** sequence as the GROUP BY term, but that is much harder to check,
+** alternative collating sequences are uncommon, and this is only an
+** optimization, so we take the easy way out and simply require the
+** GROUP BY to use the BINARY collating sequence.
+*/
+SQLITE_PRIVATE int sqlite3ExprIsConstantOrGroupBy(Parse *pParse, Expr *p, ExprList *pGroupBy){
+ Walker w;
+ w.eCode = 1;
+ w.xExprCallback = exprNodeIsConstantOrGroupBy;
+ w.xSelectCallback = 0;
+ w.u.pGroupBy = pGroupBy;
+ w.pParse = pParse;
+ sqlite3WalkExpr(&w, p);
+ return w.eCode;
+}
+
/*
** Walk an expression tree. Return non-zero if the expression is constant
** or a function call with constant arguments. Return and 0 if there
return exprIsConst(p, 4+isInit, 0);
}
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+/*
+** Walk an expression tree. Return 1 if the expression contains a
+** subquery of some kind. Return 0 if there are no subqueries.
+*/
+SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr *p){
+ Walker w;
+ w.eCode = 1;
+ w.xExprCallback = sqlite3ExprWalkNoop;
+ w.xSelectCallback = sqlite3SelectWalkFail;
+#ifdef SQLITE_DEBUG
+ w.xSelectCallback2 = sqlite3SelectWalkAssert2;
+#endif
+ sqlite3WalkExpr(&w, p);
+ return w.eCode==0;
+}
+#endif
+
/*
** If the expression p codes a constant integer that is small enough
** to fit in a 32-bit integer, return 1 and put the value of the integer
*/
SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr *p, int *pValue){
int rc = 0;
+ if( p==0 ) return 0; /* Can only happen following on OOM */
/* If an expression is an integer literal that fits in a signed 32-bit
** integer, then the EP_IntValue flag will have already been set */
case TK_BLOB:
return 0;
case TK_COLUMN:
- assert( p->pTab!=0 );
return ExprHasProperty(p, EP_CanBeNull) ||
+ p->pTab==0 || /* Reference to column of index on expression */
(p->iColumn>=0 && p->pTab->aCol[p->iColumn].notNull==0);
default:
return 1;
}
/*
-** Return true if we are able to the IN operator optimization on a
-** query of the form
-**
-** x IN (SELECT ...)
-**
-** Where the SELECT... clause is as specified by the parameter to this
-** routine.
-**
-** The Select object passed in has already been preprocessed and no
-** errors have been found.
+** pX is the RHS of an IN operator. If pX is a SELECT statement
+** that can be simplified to a direct table access, then return
+** a pointer to the SELECT statement. If pX is not a SELECT statement,
+** or if the SELECT statement needs to be manifested into a transient
+** table, then return NULL.
*/
#ifndef SQLITE_OMIT_SUBQUERY
-static int isCandidateForInOpt(Select *p){
+static Select *isCandidateForInOpt(Expr *pX){
+ Select *p;
SrcList *pSrc;
ExprList *pEList;
Table *pTab;
- if( p==0 ) return 0; /* right-hand side of IN is SELECT */
+ int i;
+ if( !ExprHasProperty(pX, EP_xIsSelect) ) return 0; /* Not a subquery */
+ if( ExprHasProperty(pX, EP_VarSelect) ) return 0; /* Correlated subq */
+ p = pX->x.pSelect;
if( p->pPrior ) return 0; /* Not a compound SELECT */
if( p->selFlags & (SF_Distinct|SF_Aggregate) ){
testcase( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct );
}
assert( p->pGroupBy==0 ); /* Has no GROUP BY clause */
if( p->pLimit ) return 0; /* Has no LIMIT clause */
- assert( p->pOffset==0 ); /* No LIMIT means no OFFSET */
if( p->pWhere ) return 0; /* Has no WHERE clause */
pSrc = p->pSrc;
assert( pSrc!=0 );
if( pSrc->nSrc!=1 ) return 0; /* Single term in FROM clause */
if( pSrc->a[0].pSelect ) return 0; /* FROM is not a subquery or view */
pTab = pSrc->a[0].pTab;
- if( NEVER(pTab==0) ) return 0;
+ assert( pTab!=0 );
assert( pTab->pSelect==0 ); /* FROM clause is not a view */
if( IsVirtual(pTab) ) return 0; /* FROM clause not a virtual table */
pEList = p->pEList;
- if( pEList->nExpr!=1 ) return 0; /* One column in the result set */
- if( pEList->a[0].pExpr->op!=TK_COLUMN ) return 0; /* Result is a column */
- return 1;
+ assert( pEList!=0 );
+ /* All SELECT results must be columns. */
+ for(i=0; i<pEList->nExpr; i++){
+ Expr *pRes = pEList->a[i].pExpr;
+ if( pRes->op!=TK_COLUMN ) return 0;
+ assert( pRes->iTable==pSrc->a[0].iCursor ); /* Not a correlated subquery */
+ }
+ return p;
}
#endif /* SQLITE_OMIT_SUBQUERY */
-/*
-** Code an OP_Once instruction and allocate space for its flag. Return the
-** address of the new instruction.
-*/
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *pParse){
- Vdbe *v = sqlite3GetVdbe(pParse); /* Virtual machine being coded */
- return sqlite3VdbeAddOp1(v, OP_Once, pParse->nOnce++);
-}
-
+#ifndef SQLITE_OMIT_SUBQUERY
/*
** Generate code that checks the left-most column of index table iCur to see if
** it contains any NULL entries. Cause the register at regHasNull to be set
VdbeComment((v, "first_entry_in(%d)", iCur));
sqlite3VdbeJumpHere(v, addr1);
}
+#endif
#ifndef SQLITE_OMIT_SUBQUERY
** An existing b-tree might be used if the RHS expression pX is a simple
** subquery such as:
**
-** SELECT <column> FROM <table>
+** SELECT <column1>, <column2>... FROM <table>
**
** If the RHS of the IN operator is a list or a more complex subquery, then
** an ephemeral table might need to be generated from the RHS and then
** pX->iTable made to point to the ephemeral table instead of an
** existing table.
**
-** The inFlags parameter must contain exactly one of the bits
-** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP. If inFlags contains
-** IN_INDEX_MEMBERSHIP, then the generated table will be used for a
-** fast membership test. When the IN_INDEX_LOOP bit is set, the
-** IN index will be used to loop over all values of the RHS of the
-** IN operator.
+** The inFlags parameter must contain, at a minimum, one of the bits
+** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP but not both. If inFlags contains
+** IN_INDEX_MEMBERSHIP, then the generated table will be used for a fast
+** membership test. When the IN_INDEX_LOOP bit is set, the IN index will
+** be used to loop over all values of the RHS of the IN operator.
**
** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate
** through the set members) then the b-tree must not contain duplicates.
-** An epheremal table must be used unless the selected <column> is guaranteed
-** to be unique - either because it is an INTEGER PRIMARY KEY or it
-** has a UNIQUE constraint or UNIQUE index.
+** An epheremal table will be created unless the selected columns are guaranteed
+** to be unique - either because it is an INTEGER PRIMARY KEY or due to
+** a UNIQUE constraint or index.
**
** When IN_INDEX_MEMBERSHIP is used (and the b-tree will be used
** for fast set membership tests) then an epheremal table must
-** be used unless <column> is an INTEGER PRIMARY KEY or an index can
-** be found with <column> as its left-most column.
+** be used unless <columns> is a single INTEGER PRIMARY KEY column or an
+** index can be found with the specified <columns> as its left-most.
**
** If the IN_INDEX_NOOP_OK and IN_INDEX_MEMBERSHIP are both set and
** if the RHS of the IN operator is a list (not a subquery) then this
** the value in that register will be NULL if the b-tree contains one or more
** NULL values, and it will be some non-NULL value if the b-tree contains no
** NULL values.
+**
+** If the aiMap parameter is not NULL, it must point to an array containing
+** one element for each column returned by the SELECT statement on the RHS
+** of the IN(...) operator. The i'th entry of the array is populated with the
+** offset of the index column that matches the i'th column returned by the
+** SELECT. For example, if the expression and selected index are:
+**
+** (?,?,?) IN (SELECT a, b, c FROM t1)
+** CREATE INDEX i1 ON t1(b, c, a);
+**
+** then aiMap[] is populated with {2, 0, 1}.
*/
#ifndef SQLITE_OMIT_SUBQUERY
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *pParse, Expr *pX, u32 inFlags, int *prRhsHasNull){
+SQLITE_PRIVATE int sqlite3FindInIndex(
+ Parse *pParse, /* Parsing context */
+ Expr *pX, /* The right-hand side (RHS) of the IN operator */
+ u32 inFlags, /* IN_INDEX_LOOP, _MEMBERSHIP, and/or _NOOP_OK */
+ int *prRhsHasNull, /* Register holding NULL status. See notes */
+ int *aiMap /* Mapping from Index fields to RHS fields */
+){
Select *p; /* SELECT to the right of IN operator */
int eType = 0; /* Type of RHS table. IN_INDEX_* */
int iTab = pParse->nTab++; /* Cursor of the RHS table */
assert( pX->op==TK_IN );
mustBeUnique = (inFlags & IN_INDEX_LOOP)!=0;
+ /* If the RHS of this IN(...) operator is a SELECT, and if it matters
+ ** whether or not the SELECT result contains NULL values, check whether
+ ** or not NULL is actually possible (it may not be, for example, due
+ ** to NOT NULL constraints in the schema). If no NULL values are possible,
+ ** set prRhsHasNull to 0 before continuing. */
+ if( prRhsHasNull && (pX->flags & EP_xIsSelect) ){
+ int i;
+ ExprList *pEList = pX->x.pSelect->pEList;
+ for(i=0; i<pEList->nExpr; i++){
+ if( sqlite3ExprCanBeNull(pEList->a[i].pExpr) ) break;
+ }
+ if( i==pEList->nExpr ){
+ prRhsHasNull = 0;
+ }
+ }
+
/* Check to see if an existing table or index can be used to
** satisfy the query. This is preferable to generating a new
- ** ephemeral table.
- */
- p = (ExprHasProperty(pX, EP_xIsSelect) ? pX->x.pSelect : 0);
- if( pParse->nErr==0 && isCandidateForInOpt(p) ){
+ ** ephemeral table. */
+ if( pParse->nErr==0 && (p = isCandidateForInOpt(pX))!=0 ){
sqlite3 *db = pParse->db; /* Database connection */
Table *pTab; /* Table <table>. */
- Expr *pExpr; /* Expression <column> */
- i16 iCol; /* Index of column <column> */
i16 iDb; /* Database idx for pTab */
+ ExprList *pEList = p->pEList;
+ int nExpr = pEList->nExpr;
- assert( p ); /* Because of isCandidateForInOpt(p) */
assert( p->pEList!=0 ); /* Because of isCandidateForInOpt(p) */
assert( p->pEList->a[0].pExpr!=0 ); /* Because of isCandidateForInOpt(p) */
assert( p->pSrc!=0 ); /* Because of isCandidateForInOpt(p) */
pTab = p->pSrc->a[0].pTab;
- pExpr = p->pEList->a[0].pExpr;
- iCol = (i16)pExpr->iColumn;
-
+
/* Code an OP_Transaction and OP_TableLock for <table>. */
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
sqlite3CodeVerifySchema(pParse, iDb);
sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);
- /* This function is only called from two places. In both cases the vdbe
- ** has already been allocated. So assume sqlite3GetVdbe() is always
- ** successful here.
- */
- assert(v);
- if( iCol<0 ){
- int iAddr = sqlite3CodeOnce(pParse);
+ assert(v); /* sqlite3GetVdbe() has always been previously called */
+ if( nExpr==1 && pEList->a[0].pExpr->iColumn<0 ){
+ /* The "x IN (SELECT rowid FROM table)" case */
+ int iAddr = sqlite3VdbeAddOp0(v, OP_Once);
VdbeCoverage(v);
sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead);
sqlite3VdbeJumpHere(v, iAddr);
}else{
Index *pIdx; /* Iterator variable */
+ int affinity_ok = 1;
+ int i;
- /* The collation sequence used by the comparison. If an index is to
- ** be used in place of a temp-table, it must be ordered according
- ** to this collation sequence. */
- CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pExpr);
-
- /* Check that the affinity that will be used to perform the
- ** comparison is the same as the affinity of the column. If
- ** it is not, it is not possible to use any index.
- */
- int affinity_ok = sqlite3IndexAffinityOk(pX, pTab->aCol[iCol].affinity);
-
- for(pIdx=pTab->pIndex; pIdx && eType==0 && affinity_ok; pIdx=pIdx->pNext){
- if( (pIdx->aiColumn[0]==iCol)
- && sqlite3FindCollSeq(db, ENC(db), pIdx->azColl[0], 0)==pReq
- && (!mustBeUnique || (pIdx->nKeyCol==1 && IsUniqueIndex(pIdx)))
- ){
- int iAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb);
- sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
- VdbeComment((v, "%s", pIdx->zName));
- assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 );
- eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0];
-
- if( prRhsHasNull && !pTab->aCol[iCol].notNull ){
- *prRhsHasNull = ++pParse->nMem;
- sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull);
+ /* Check that the affinity that will be used to perform each
+ ** comparison is the same as the affinity of each column in table
+ ** on the RHS of the IN operator. If it not, it is not possible to
+ ** use any index of the RHS table. */
+ for(i=0; i<nExpr && affinity_ok; i++){
+ Expr *pLhs = sqlite3VectorFieldSubexpr(pX->pLeft, i);
+ int iCol = pEList->a[i].pExpr->iColumn;
+ char idxaff = sqlite3TableColumnAffinity(pTab,iCol); /* RHS table */
+ char cmpaff = sqlite3CompareAffinity(pLhs, idxaff);
+ testcase( cmpaff==SQLITE_AFF_BLOB );
+ testcase( cmpaff==SQLITE_AFF_TEXT );
+ switch( cmpaff ){
+ case SQLITE_AFF_BLOB:
+ break;
+ case SQLITE_AFF_TEXT:
+ /* sqlite3CompareAffinity() only returns TEXT if one side or the
+ ** other has no affinity and the other side is TEXT. Hence,
+ ** the only way for cmpaff to be TEXT is for idxaff to be TEXT
+ ** and for the term on the LHS of the IN to have no affinity. */
+ assert( idxaff==SQLITE_AFF_TEXT );
+ break;
+ default:
+ affinity_ok = sqlite3IsNumericAffinity(idxaff);
+ }
+ }
+
+ if( affinity_ok ){
+ /* Search for an existing index that will work for this IN operator */
+ for(pIdx=pTab->pIndex; pIdx && eType==0; pIdx=pIdx->pNext){
+ Bitmask colUsed; /* Columns of the index used */
+ Bitmask mCol; /* Mask for the current column */
+ if( pIdx->nColumn<nExpr ) continue;
+ /* Maximum nColumn is BMS-2, not BMS-1, so that we can compute
+ ** BITMASK(nExpr) without overflowing */
+ testcase( pIdx->nColumn==BMS-2 );
+ testcase( pIdx->nColumn==BMS-1 );
+ if( pIdx->nColumn>=BMS-1 ) continue;
+ if( mustBeUnique ){
+ if( pIdx->nKeyCol>nExpr
+ ||(pIdx->nColumn>nExpr && !IsUniqueIndex(pIdx))
+ ){
+ continue; /* This index is not unique over the IN RHS columns */
+ }
}
- sqlite3VdbeJumpHere(v, iAddr);
- }
- }
- }
- }
+
+ colUsed = 0; /* Columns of index used so far */
+ for(i=0; i<nExpr; i++){
+ Expr *pLhs = sqlite3VectorFieldSubexpr(pX->pLeft, i);
+ Expr *pRhs = pEList->a[i].pExpr;
+ CollSeq *pReq = sqlite3BinaryCompareCollSeq(pParse, pLhs, pRhs);
+ int j;
+
+ assert( pReq!=0 || pRhs->iColumn==XN_ROWID || pParse->nErr );
+ for(j=0; j<nExpr; j++){
+ if( pIdx->aiColumn[j]!=pRhs->iColumn ) continue;
+ assert( pIdx->azColl[j] );
+ if( pReq!=0 && sqlite3StrICmp(pReq->zName, pIdx->azColl[j])!=0 ){
+ continue;
+ }
+ break;
+ }
+ if( j==nExpr ) break;
+ mCol = MASKBIT(j);
+ if( mCol & colUsed ) break; /* Each column used only once */
+ colUsed |= mCol;
+ if( aiMap ) aiMap[i] = j;
+ }
+
+ assert( i==nExpr || colUsed!=(MASKBIT(nExpr)-1) );
+ if( colUsed==(MASKBIT(nExpr)-1) ){
+ /* If we reach this point, that means the index pIdx is usable */
+ int iAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
+#ifndef SQLITE_OMIT_EXPLAIN
+ sqlite3VdbeAddOp4(v, OP_Explain, 0, 0, 0,
+ sqlite3MPrintf(db, "USING INDEX %s FOR IN-OPERATOR",pIdx->zName),
+ P4_DYNAMIC);
+#endif
+ sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb);
+ sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
+ VdbeComment((v, "%s", pIdx->zName));
+ assert( IN_INDEX_INDEX_DESC == IN_INDEX_INDEX_ASC+1 );
+ eType = IN_INDEX_INDEX_ASC + pIdx->aSortOrder[0];
+
+ if( prRhsHasNull ){
+#ifdef SQLITE_ENABLE_COLUMN_USED_MASK
+ i64 mask = (1<<nExpr)-1;
+ sqlite3VdbeAddOp4Dup8(v, OP_ColumnsUsed,
+ iTab, 0, 0, (u8*)&mask, P4_INT64);
+#endif
+ *prRhsHasNull = ++pParse->nMem;
+ if( nExpr==1 ){
+ sqlite3SetHasNullFlag(v, iTab, *prRhsHasNull);
+ }
+ }
+ sqlite3VdbeJumpHere(v, iAddr);
+ }
+ } /* End loop over indexes */
+ } /* End if( affinity_ok ) */
+ } /* End if not an rowid index */
+ } /* End attempt to optimize using an index */
/* If no preexisting index is available for the IN clause
** and IN_INDEX_NOOP is an allowed reply
** and the RHS of the IN operator is a list, not a subquery
- ** and the RHS is not contant or has two or fewer terms,
+ ** and the RHS is not constant or has two or fewer terms,
** then it is not worth creating an ephemeral table to evaluate
** the IN operator so return IN_INDEX_NOOP.
*/
){
eType = IN_INDEX_NOOP;
}
-
if( eType==0 ){
/* Could not find an existing table or index to use as the RHS b-tree.
}else{
pX->iTable = iTab;
}
+
+ if( aiMap && eType!=IN_INDEX_INDEX_ASC && eType!=IN_INDEX_INDEX_DESC ){
+ int i, n;
+ n = sqlite3ExprVectorSize(pX->pLeft);
+ for(i=0; i<n; i++) aiMap[i] = i;
+ }
return eType;
}
#endif
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Argument pExpr is an (?, ?...) IN(...) expression. This
+** function allocates and returns a nul-terminated string containing
+** the affinities to be used for each column of the comparison.
+**
+** It is the responsibility of the caller to ensure that the returned
+** string is eventually freed using sqlite3DbFree().
+*/
+static char *exprINAffinity(Parse *pParse, Expr *pExpr){
+ Expr *pLeft = pExpr->pLeft;
+ int nVal = sqlite3ExprVectorSize(pLeft);
+ Select *pSelect = (pExpr->flags & EP_xIsSelect) ? pExpr->x.pSelect : 0;
+ char *zRet;
+
+ assert( pExpr->op==TK_IN );
+ zRet = sqlite3DbMallocRaw(pParse->db, nVal+1);
+ if( zRet ){
+ int i;
+ for(i=0; i<nVal; i++){
+ Expr *pA = sqlite3VectorFieldSubexpr(pLeft, i);
+ char a = sqlite3ExprAffinity(pA);
+ if( pSelect ){
+ zRet[i] = sqlite3CompareAffinity(pSelect->pEList->a[i].pExpr, a);
+ }else{
+ zRet[i] = a;
+ }
+ }
+ zRet[nVal] = '\0';
+ }
+ return zRet;
+}
+#endif
+
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Load the Parse object passed as the first argument with an error
+** message of the form:
+**
+** "sub-select returns N columns - expected M"
+*/
+SQLITE_PRIVATE void sqlite3SubselectError(Parse *pParse, int nActual, int nExpect){
+ const char *zFmt = "sub-select returns %d columns - expected %d";
+ sqlite3ErrorMsg(pParse, zFmt, nActual, nExpect);
+}
+#endif
+
+/*
+** Expression pExpr is a vector that has been used in a context where
+** it is not permitted. If pExpr is a sub-select vector, this routine
+** loads the Parse object with a message of the form:
+**
+** "sub-select returns N columns - expected 1"
+**
+** Or, if it is a regular scalar vector:
+**
+** "row value misused"
+*/
+SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse *pParse, Expr *pExpr){
+#ifndef SQLITE_OMIT_SUBQUERY
+ if( pExpr->flags & EP_xIsSelect ){
+ sqlite3SubselectError(pParse, pExpr->x.pSelect->pEList->nExpr, 1);
+ }else
+#endif
+ {
+ sqlite3ErrorMsg(pParse, "row value misused");
+ }
+}
+
/*
** Generate code for scalar subqueries used as a subquery expression, EXISTS,
** or IN operators. Examples:
** value to non-NULL if the RHS is NULL-free.
**
** For a SELECT or EXISTS operator, return the register that holds the
-** result. For IN operators or if an error occurs, the return value is 0.
+** result. For a multi-column SELECT, the result is stored in a contiguous
+** array of registers and the return value is the register of the left-most
+** result column. Return 0 for IN operators or if an error occurs.
*/
#ifndef SQLITE_OMIT_SUBQUERY
SQLITE_PRIVATE int sqlite3CodeSubselect(
if( NEVER(v==0) ) return 0;
sqlite3ExprCachePush(pParse);
- /* This code must be run in its entirety every time it is encountered
- ** if any of the following is true:
+ /* The evaluation of the IN/EXISTS/SELECT must be repeated every time it
+ ** is encountered if any of the following is true:
**
** * The right-hand side is a correlated subquery
** * The right-hand side is an expression list containing variables
** save the results, and reuse the same result on subsequent invocations.
*/
if( !ExprHasProperty(pExpr, EP_VarSelect) ){
- jmpIfDynamic = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+ jmpIfDynamic = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
}
#ifndef SQLITE_OMIT_EXPLAIN
if( pParse->explain==2 ){
- char *zMsg = sqlite3MPrintf(
- pParse->db, "EXECUTE %s%s SUBQUERY %d", jmpIfDynamic>=0?"":"CORRELATED ",
- pExpr->op==TK_IN?"LIST":"SCALAR", pParse->iNextSelectId
+ char *zMsg = sqlite3MPrintf(pParse->db, "EXECUTE %s%s SUBQUERY %d",
+ jmpIfDynamic>=0?"":"CORRELATED ",
+ pExpr->op==TK_IN?"LIST":"SCALAR",
+ pParse->iNextSelectId
);
sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC);
}
switch( pExpr->op ){
case TK_IN: {
- char affinity; /* Affinity of the LHS of the IN */
int addr; /* Address of OP_OpenEphemeral instruction */
Expr *pLeft = pExpr->pLeft; /* the LHS of the IN operator */
KeyInfo *pKeyInfo = 0; /* Key information */
-
- affinity = sqlite3ExprAffinity(pLeft);
+ int nVal; /* Size of vector pLeft */
+
+ nVal = sqlite3ExprVectorSize(pLeft);
+ assert( !isRowid || nVal==1 );
/* Whether this is an 'x IN(SELECT...)' or an 'x IN(<exprlist>)'
** expression it is handled the same way. An ephemeral table is
- ** filled with single-field index keys representing the results
- ** from the SELECT or the <exprlist>.
+ ** filled with index keys representing the results from the
+ ** SELECT or the <exprlist>.
**
** If the 'x' expression is a column value, or the SELECT...
** statement returns a column value, then the affinity of that
** is used.
*/
pExpr->iTable = pParse->nTab++;
- addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pExpr->iTable, !isRowid);
- pKeyInfo = isRowid ? 0 : sqlite3KeyInfoAlloc(pParse->db, 1, 1);
+ addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral,
+ pExpr->iTable, (isRowid?0:nVal));
+ pKeyInfo = isRowid ? 0 : sqlite3KeyInfoAlloc(pParse->db, nVal, 1);
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
/* Case 1: expr IN (SELECT ...)
** table allocated and opened above.
*/
Select *pSelect = pExpr->x.pSelect;
- SelectDest dest;
- ExprList *pEList;
+ ExprList *pEList = pSelect->pEList;
assert( !isRowid );
- sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable);
- dest.affSdst = (u8)affinity;
- assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable );
- pSelect->iLimit = 0;
- testcase( pSelect->selFlags & SF_Distinct );
- testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */
- if( sqlite3Select(pParse, pSelect, &dest) ){
- sqlite3KeyInfoUnref(pKeyInfo);
- return 0;
+ /* If the LHS and RHS of the IN operator do not match, that
+ ** error will have been caught long before we reach this point. */
+ if( ALWAYS(pEList->nExpr==nVal) ){
+ SelectDest dest;
+ int i;
+ sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable);
+ dest.zAffSdst = exprINAffinity(pParse, pExpr);
+ pSelect->iLimit = 0;
+ testcase( pSelect->selFlags & SF_Distinct );
+ testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */
+ if( sqlite3Select(pParse, pSelect, &dest) ){
+ sqlite3DbFree(pParse->db, dest.zAffSdst);
+ sqlite3KeyInfoUnref(pKeyInfo);
+ return 0;
+ }
+ sqlite3DbFree(pParse->db, dest.zAffSdst);
+ assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */
+ assert( pEList!=0 );
+ assert( pEList->nExpr>0 );
+ assert( sqlite3KeyInfoIsWriteable(pKeyInfo) );
+ for(i=0; i<nVal; i++){
+ Expr *p = sqlite3VectorFieldSubexpr(pLeft, i);
+ pKeyInfo->aColl[i] = sqlite3BinaryCompareCollSeq(
+ pParse, p, pEList->a[i].pExpr
+ );
+ }
}
- pEList = pSelect->pEList;
- assert( pKeyInfo!=0 ); /* OOM will cause exit after sqlite3Select() */
- assert( pEList!=0 );
- assert( pEList->nExpr>0 );
- assert( sqlite3KeyInfoIsWriteable(pKeyInfo) );
- pKeyInfo->aColl[0] = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft,
- pEList->a[0].pExpr);
}else if( ALWAYS(pExpr->x.pList!=0) ){
/* Case 2: expr IN (exprlist)
**
** that columns affinity when building index keys. If <expr> is not
** a column, use numeric affinity.
*/
+ char affinity; /* Affinity of the LHS of the IN */
int i;
ExprList *pList = pExpr->x.pList;
struct ExprList_item *pItem;
int r1, r2, r3;
+ affinity = sqlite3ExprAffinity(pLeft);
if( !affinity ){
affinity = SQLITE_AFF_BLOB;
}
/* Loop through each expression in <exprlist>. */
r1 = sqlite3GetTempReg(pParse);
r2 = sqlite3GetTempReg(pParse);
- if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2);
+ if( isRowid ) sqlite3VdbeAddOp4(v, OP_Blob, 0, r2, 0, "", P4_STATIC);
for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){
Expr *pE2 = pItem->pExpr;
int iValToIns;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, r3, 1, r2, &affinity, 1);
sqlite3ExprCacheAffinityChange(pParse, r3, 1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, pExpr->iTable, r2);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pExpr->iTable, r2, r3, 1);
}
}
}
case TK_EXISTS:
case TK_SELECT:
default: {
- /* If this has to be a scalar SELECT. Generate code to put the
- ** value of this select in a memory cell and record the number
- ** of the memory cell in iColumn. If this is an EXISTS, write
- ** an integer 0 (not exists) or 1 (exists) into a memory cell
- ** and record that memory cell in iColumn.
+ /* Case 3: (SELECT ... FROM ...)
+ ** or: EXISTS(SELECT ... FROM ...)
+ **
+ ** For a SELECT, generate code to put the values for all columns of
+ ** the first row into an array of registers and return the index of
+ ** the first register.
+ **
+ ** If this is an EXISTS, write an integer 0 (not exists) or 1 (exists)
+ ** into a register and return that register number.
+ **
+ ** In both cases, the query is augmented with "LIMIT 1". Any
+ ** preexisting limit is discarded in place of the new LIMIT 1.
*/
Select *pSel; /* SELECT statement to encode */
- SelectDest dest; /* How to deal with SELECt result */
+ SelectDest dest; /* How to deal with SELECT result */
+ int nReg; /* Registers to allocate */
+ Expr *pLimit; /* New limit expression */
testcase( pExpr->op==TK_EXISTS );
testcase( pExpr->op==TK_SELECT );
assert( pExpr->op==TK_EXISTS || pExpr->op==TK_SELECT );
-
assert( ExprHasProperty(pExpr, EP_xIsSelect) );
+
pSel = pExpr->x.pSelect;
- sqlite3SelectDestInit(&dest, 0, ++pParse->nMem);
+ nReg = pExpr->op==TK_SELECT ? pSel->pEList->nExpr : 1;
+ sqlite3SelectDestInit(&dest, 0, pParse->nMem+1);
+ pParse->nMem += nReg;
if( pExpr->op==TK_SELECT ){
dest.eDest = SRT_Mem;
dest.iSdst = dest.iSDParm;
- sqlite3VdbeAddOp2(v, OP_Null, 0, dest.iSDParm);
+ dest.nSdst = nReg;
+ sqlite3VdbeAddOp3(v, OP_Null, 0, dest.iSDParm, dest.iSDParm+nReg-1);
VdbeComment((v, "Init subquery result"));
}else{
dest.eDest = SRT_Exists;
sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iSDParm);
VdbeComment((v, "Init EXISTS result"));
}
- sqlite3ExprDelete(pParse->db, pSel->pLimit);
- pSel->pLimit = sqlite3PExpr(pParse, TK_INTEGER, 0, 0,
- &sqlite3IntTokens[1]);
+ pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[1], 0);
+ if( pSel->pLimit ){
+ sqlite3ExprDelete(pParse->db, pSel->pLimit->pLeft);
+ pSel->pLimit->pLeft = pLimit;
+ }else{
+ pSel->pLimit = sqlite3PExpr(pParse, TK_LIMIT, pLimit, 0);
+ }
pSel->iLimit = 0;
- pSel->selFlags &= ~SF_MultiValue;
if( sqlite3Select(pParse, pSel, &dest) ){
return 0;
}
}
#endif /* SQLITE_OMIT_SUBQUERY */
+#ifndef SQLITE_OMIT_SUBQUERY
+/*
+** Expr pIn is an IN(...) expression. This function checks that the
+** sub-select on the RHS of the IN() operator has the same number of
+** columns as the vector on the LHS. Or, if the RHS of the IN() is not
+** a sub-query, that the LHS is a vector of size 1.
+*/
+SQLITE_PRIVATE int sqlite3ExprCheckIN(Parse *pParse, Expr *pIn){
+ int nVector = sqlite3ExprVectorSize(pIn->pLeft);
+ if( (pIn->flags & EP_xIsSelect) ){
+ if( nVector!=pIn->x.pSelect->pEList->nExpr ){
+ sqlite3SubselectError(pParse, pIn->x.pSelect->pEList->nExpr, nVector);
+ return 1;
+ }
+ }else if( nVector!=1 ){
+ sqlite3VectorErrorMsg(pParse, pIn->pLeft);
+ return 1;
+ }
+ return 0;
+}
+#endif
+
#ifndef SQLITE_OMIT_SUBQUERY
/*
** Generate code for an IN expression.
** x IN (SELECT ...)
** x IN (value, value, ...)
**
-** The left-hand side (LHS) is a scalar expression. The right-hand side (RHS)
-** is an array of zero or more values. The expression is true if the LHS is
-** contained within the RHS. The value of the expression is unknown (NULL)
-** if the LHS is NULL or if the LHS is not contained within the RHS and the
-** RHS contains one or more NULL values.
+** The left-hand side (LHS) is a scalar or vector expression. The
+** right-hand side (RHS) is an array of zero or more scalar values, or a
+** subquery. If the RHS is a subquery, the number of result columns must
+** match the number of columns in the vector on the LHS. If the RHS is
+** a list of values, the LHS must be a scalar.
+**
+** The IN operator is true if the LHS value is contained within the RHS.
+** The result is false if the LHS is definitely not in the RHS. The
+** result is NULL if the presence of the LHS in the RHS cannot be
+** determined due to NULLs.
**
** This routine generates code that jumps to destIfFalse if the LHS is not
** contained within the RHS. If due to NULLs we cannot determine if the LHS
** is contained in the RHS then jump to destIfNull. If the LHS is contained
** within the RHS then fall through.
+**
+** See the separate in-operator.md documentation file in the canonical
+** SQLite source tree for additional information.
*/
static void sqlite3ExprCodeIN(
Parse *pParse, /* Parsing and code generating context */
int destIfNull /* Jump here if the results are unknown due to NULLs */
){
int rRhsHasNull = 0; /* Register that is true if RHS contains NULL values */
- char affinity; /* Comparison affinity to use */
int eType; /* Type of the RHS */
- int r1; /* Temporary use register */
+ int rLhs; /* Register(s) holding the LHS values */
+ int rLhsOrig; /* LHS values prior to reordering by aiMap[] */
Vdbe *v; /* Statement under construction */
+ int *aiMap = 0; /* Map from vector field to index column */
+ char *zAff = 0; /* Affinity string for comparisons */
+ int nVector; /* Size of vectors for this IN operator */
+ int iDummy; /* Dummy parameter to exprCodeVector() */
+ Expr *pLeft; /* The LHS of the IN operator */
+ int i; /* loop counter */
+ int destStep2; /* Where to jump when NULLs seen in step 2 */
+ int destStep6 = 0; /* Start of code for Step 6 */
+ int addrTruthOp; /* Address of opcode that determines the IN is true */
+ int destNotNull; /* Jump here if a comparison is not true in step 6 */
+ int addrTop; /* Top of the step-6 loop */
+
+ pLeft = pExpr->pLeft;
+ if( sqlite3ExprCheckIN(pParse, pExpr) ) return;
+ zAff = exprINAffinity(pParse, pExpr);
+ nVector = sqlite3ExprVectorSize(pExpr->pLeft);
+ aiMap = (int*)sqlite3DbMallocZero(
+ pParse->db, nVector*(sizeof(int) + sizeof(char)) + 1
+ );
+ if( pParse->db->mallocFailed ) goto sqlite3ExprCodeIN_oom_error;
- /* Compute the RHS. After this step, the table with cursor
- ** pExpr->iTable will contains the values that make up the RHS.
- */
+ /* Attempt to compute the RHS. After this step, if anything other than
+ ** IN_INDEX_NOOP is returned, the table opened ith cursor pExpr->iTable
+ ** contains the values that make up the RHS. If IN_INDEX_NOOP is returned,
+ ** the RHS has not yet been coded. */
v = pParse->pVdbe;
assert( v!=0 ); /* OOM detected prior to this routine */
VdbeNoopComment((v, "begin IN expr"));
eType = sqlite3FindInIndex(pParse, pExpr,
IN_INDEX_MEMBERSHIP | IN_INDEX_NOOP_OK,
- destIfFalse==destIfNull ? 0 : &rRhsHasNull);
+ destIfFalse==destIfNull ? 0 : &rRhsHasNull, aiMap);
- /* Figure out the affinity to use to create a key from the results
- ** of the expression. affinityStr stores a static string suitable for
- ** P4 of OP_MakeRecord.
- */
- affinity = comparisonAffinity(pExpr);
+ assert( pParse->nErr || nVector==1 || eType==IN_INDEX_EPH
+ || eType==IN_INDEX_INDEX_ASC || eType==IN_INDEX_INDEX_DESC
+ );
+#ifdef SQLITE_DEBUG
+ /* Confirm that aiMap[] contains nVector integer values between 0 and
+ ** nVector-1. */
+ for(i=0; i<nVector; i++){
+ int j, cnt;
+ for(cnt=j=0; j<nVector; j++) if( aiMap[j]==i ) cnt++;
+ assert( cnt==1 );
+ }
+#endif
- /* Code the LHS, the <expr> from "<expr> IN (...)".
+ /* Code the LHS, the <expr> from "<expr> IN (...)". If the LHS is a
+ ** vector, then it is stored in an array of nVector registers starting
+ ** at r1.
+ **
+ ** sqlite3FindInIndex() might have reordered the fields of the LHS vector
+ ** so that the fields are in the same order as an existing index. The
+ ** aiMap[] array contains a mapping from the original LHS field order to
+ ** the field order that matches the RHS index.
*/
sqlite3ExprCachePush(pParse);
- r1 = sqlite3GetTempReg(pParse);
- sqlite3ExprCode(pParse, pExpr->pLeft, r1);
+ rLhsOrig = exprCodeVector(pParse, pLeft, &iDummy);
+ for(i=0; i<nVector && aiMap[i]==i; i++){} /* Are LHS fields reordered? */
+ if( i==nVector ){
+ /* LHS fields are not reordered */
+ rLhs = rLhsOrig;
+ }else{
+ /* Need to reorder the LHS fields according to aiMap */
+ rLhs = sqlite3GetTempRange(pParse, nVector);
+ for(i=0; i<nVector; i++){
+ sqlite3VdbeAddOp3(v, OP_Copy, rLhsOrig+i, rLhs+aiMap[i], 0);
+ }
+ }
/* If sqlite3FindInIndex() did not find or create an index that is
** suitable for evaluating the IN operator, then evaluate using a
** sequence of comparisons.
+ **
+ ** This is step (1) in the in-operator.md optimized algorithm.
*/
if( eType==IN_INDEX_NOOP ){
ExprList *pList = pExpr->x.pList;
assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
if( destIfNull!=destIfFalse ){
regCkNull = sqlite3GetTempReg(pParse);
- sqlite3VdbeAddOp3(v, OP_BitAnd, r1, r1, regCkNull);
+ sqlite3VdbeAddOp3(v, OP_BitAnd, rLhs, rLhs, regCkNull);
}
for(ii=0; ii<pList->nExpr; ii++){
r2 = sqlite3ExprCodeTemp(pParse, pList->a[ii].pExpr, ®ToFree);
sqlite3VdbeAddOp3(v, OP_BitAnd, regCkNull, r2, regCkNull);
}
if( ii<pList->nExpr-1 || destIfNull!=destIfFalse ){
- sqlite3VdbeAddOp4(v, OP_Eq, r1, labelOk, r2,
+ sqlite3VdbeAddOp4(v, OP_Eq, rLhs, labelOk, r2,
(void*)pColl, P4_COLLSEQ);
VdbeCoverageIf(v, ii<pList->nExpr-1);
VdbeCoverageIf(v, ii==pList->nExpr-1);
- sqlite3VdbeChangeP5(v, affinity);
+ sqlite3VdbeChangeP5(v, zAff[0]);
}else{
assert( destIfNull==destIfFalse );
- sqlite3VdbeAddOp4(v, OP_Ne, r1, destIfFalse, r2,
+ sqlite3VdbeAddOp4(v, OP_Ne, rLhs, destIfFalse, r2,
(void*)pColl, P4_COLLSEQ); VdbeCoverage(v);
- sqlite3VdbeChangeP5(v, affinity | SQLITE_JUMPIFNULL);
+ sqlite3VdbeChangeP5(v, zAff[0] | SQLITE_JUMPIFNULL);
}
sqlite3ReleaseTempReg(pParse, regToFree);
}
}
sqlite3VdbeResolveLabel(v, labelOk);
sqlite3ReleaseTempReg(pParse, regCkNull);
+ goto sqlite3ExprCodeIN_finished;
+ }
+
+ /* Step 2: Check to see if the LHS contains any NULL columns. If the
+ ** LHS does contain NULLs then the result must be either FALSE or NULL.
+ ** We will then skip the binary search of the RHS.
+ */
+ if( destIfNull==destIfFalse ){
+ destStep2 = destIfFalse;
}else{
-
- /* If the LHS is NULL, then the result is either false or NULL depending
- ** on whether the RHS is empty or not, respectively.
- */
- if( sqlite3ExprCanBeNull(pExpr->pLeft) ){
- if( destIfNull==destIfFalse ){
- /* Shortcut for the common case where the false and NULL outcomes are
- ** the same. */
- sqlite3VdbeAddOp2(v, OP_IsNull, r1, destIfNull); VdbeCoverage(v);
- }else{
- int addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, r1); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
- VdbeCoverage(v);
- sqlite3VdbeGoto(v, destIfNull);
- sqlite3VdbeJumpHere(v, addr1);
- }
- }
-
- if( eType==IN_INDEX_ROWID ){
- /* In this case, the RHS is the ROWID of table b-tree
- */
- sqlite3VdbeAddOp2(v, OP_MustBeInt, r1, destIfFalse); VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_NotExists, pExpr->iTable, destIfFalse, r1);
+ destStep2 = destStep6 = sqlite3VdbeMakeLabel(v);
+ }
+ for(i=0; i<nVector; i++){
+ Expr *p = sqlite3VectorFieldSubexpr(pExpr->pLeft, i);
+ if( sqlite3ExprCanBeNull(p) ){
+ sqlite3VdbeAddOp2(v, OP_IsNull, rLhs+i, destStep2);
VdbeCoverage(v);
- }else{
- /* In this case, the RHS is an index b-tree.
- */
- sqlite3VdbeAddOp4(v, OP_Affinity, r1, 1, 0, &affinity, 1);
-
- /* If the set membership test fails, then the result of the
- ** "x IN (...)" expression must be either 0 or NULL. If the set
- ** contains no NULL values, then the result is 0. If the set
- ** contains one or more NULL values, then the result of the
- ** expression is also NULL.
- */
- assert( destIfFalse!=destIfNull || rRhsHasNull==0 );
- if( rRhsHasNull==0 ){
- /* This branch runs if it is known at compile time that the RHS
- ** cannot contain NULL values. This happens as the result
- ** of a "NOT NULL" constraint in the database schema.
- **
- ** Also run this branch if NULL is equivalent to FALSE
- ** for this particular IN operator.
- */
- sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse, r1, 1);
- VdbeCoverage(v);
- }else{
- /* In this branch, the RHS of the IN might contain a NULL and
- ** the presence of a NULL on the RHS makes a difference in the
- ** outcome.
- */
- int addr1;
-
- /* First check to see if the LHS is contained in the RHS. If so,
- ** then the answer is TRUE the presence of NULLs in the RHS does
- ** not matter. If the LHS is not contained in the RHS, then the
- ** answer is NULL if the RHS contains NULLs and the answer is
- ** FALSE if the RHS is NULL-free.
- */
- addr1 = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0, r1, 1);
- VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_IsNull, rRhsHasNull, destIfNull);
- VdbeCoverage(v);
- sqlite3VdbeGoto(v, destIfFalse);
- sqlite3VdbeJumpHere(v, addr1);
- }
}
}
- sqlite3ReleaseTempReg(pParse, r1);
+
+ /* Step 3. The LHS is now known to be non-NULL. Do the binary search
+ ** of the RHS using the LHS as a probe. If found, the result is
+ ** true.
+ */
+ if( eType==IN_INDEX_ROWID ){
+ /* In this case, the RHS is the ROWID of table b-tree and so we also
+ ** know that the RHS is non-NULL. Hence, we combine steps 3 and 4
+ ** into a single opcode. */
+ sqlite3VdbeAddOp3(v, OP_SeekRowid, pExpr->iTable, destIfFalse, rLhs);
+ VdbeCoverage(v);
+ addrTruthOp = sqlite3VdbeAddOp0(v, OP_Goto); /* Return True */
+ }else{
+ sqlite3VdbeAddOp4(v, OP_Affinity, rLhs, nVector, 0, zAff, nVector);
+ if( destIfFalse==destIfNull ){
+ /* Combine Step 3 and Step 5 into a single opcode */
+ sqlite3VdbeAddOp4Int(v, OP_NotFound, pExpr->iTable, destIfFalse,
+ rLhs, nVector); VdbeCoverage(v);
+ goto sqlite3ExprCodeIN_finished;
+ }
+ /* Ordinary Step 3, for the case where FALSE and NULL are distinct */
+ addrTruthOp = sqlite3VdbeAddOp4Int(v, OP_Found, pExpr->iTable, 0,
+ rLhs, nVector); VdbeCoverage(v);
+ }
+
+ /* Step 4. If the RHS is known to be non-NULL and we did not find
+ ** an match on the search above, then the result must be FALSE.
+ */
+ if( rRhsHasNull && nVector==1 ){
+ sqlite3VdbeAddOp2(v, OP_NotNull, rRhsHasNull, destIfFalse);
+ VdbeCoverage(v);
+ }
+
+ /* Step 5. If we do not care about the difference between NULL and
+ ** FALSE, then just return false.
+ */
+ if( destIfFalse==destIfNull ) sqlite3VdbeGoto(v, destIfFalse);
+
+ /* Step 6: Loop through rows of the RHS. Compare each row to the LHS.
+ ** If any comparison is NULL, then the result is NULL. If all
+ ** comparisons are FALSE then the final result is FALSE.
+ **
+ ** For a scalar LHS, it is sufficient to check just the first row
+ ** of the RHS.
+ */
+ if( destStep6 ) sqlite3VdbeResolveLabel(v, destStep6);
+ addrTop = sqlite3VdbeAddOp2(v, OP_Rewind, pExpr->iTable, destIfFalse);
+ VdbeCoverage(v);
+ if( nVector>1 ){
+ destNotNull = sqlite3VdbeMakeLabel(v);
+ }else{
+ /* For nVector==1, combine steps 6 and 7 by immediately returning
+ ** FALSE if the first comparison is not NULL */
+ destNotNull = destIfFalse;
+ }
+ for(i=0; i<nVector; i++){
+ Expr *p;
+ CollSeq *pColl;
+ int r3 = sqlite3GetTempReg(pParse);
+ p = sqlite3VectorFieldSubexpr(pLeft, i);
+ pColl = sqlite3ExprCollSeq(pParse, p);
+ sqlite3VdbeAddOp3(v, OP_Column, pExpr->iTable, i, r3);
+ sqlite3VdbeAddOp4(v, OP_Ne, rLhs+i, destNotNull, r3,
+ (void*)pColl, P4_COLLSEQ);
+ VdbeCoverage(v);
+ sqlite3ReleaseTempReg(pParse, r3);
+ }
+ sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfNull);
+ if( nVector>1 ){
+ sqlite3VdbeResolveLabel(v, destNotNull);
+ sqlite3VdbeAddOp2(v, OP_Next, pExpr->iTable, addrTop+1);
+ VdbeCoverage(v);
+
+ /* Step 7: If we reach this point, we know that the result must
+ ** be false. */
+ sqlite3VdbeAddOp2(v, OP_Goto, 0, destIfFalse);
+ }
+
+ /* Jumps here in order to return true. */
+ sqlite3VdbeJumpHere(v, addrTruthOp);
+
+sqlite3ExprCodeIN_finished:
+ if( rLhs!=rLhsOrig ) sqlite3ReleaseTempReg(pParse, rLhs);
sqlite3ExprCachePop(pParse);
VdbeComment((v, "end IN expr"));
+sqlite3ExprCodeIN_oom_error:
+ sqlite3DbFree(pParse->db, aiMap);
+ sqlite3DbFree(pParse->db, zAff);
}
#endif /* SQLITE_OMIT_SUBQUERY */
const char *z = pExpr->u.zToken;
assert( z!=0 );
c = sqlite3DecOrHexToI64(z, &value);
- if( c==0 || (c==2 && negFlag) ){
- if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; }
- sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64);
- }else{
+ if( (c==3 && !negFlag) || (c==2) || (negFlag && value==SMALLEST_INT64)){
#ifdef SQLITE_OMIT_FLOATING_POINT
sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z);
#else
#ifndef SQLITE_OMIT_HEX_INTEGER
if( sqlite3_strnicmp(z,"0x",2)==0 ){
- sqlite3ErrorMsg(pParse, "hex literal too big: %s", z);
+ sqlite3ErrorMsg(pParse, "hex literal too big: %s%s", negFlag?"-":"",z);
}else
#endif
{
codeReal(v, z, negFlag, iMem);
}
#endif
+ }else{
+ if( negFlag ){ value = c==3 ? SMALLEST_INT64 : -value; }
+ sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64);
}
}
}
/*
-** Clear a cache entry.
+** Erase column-cache entry number i
*/
-static void cacheEntryClear(Parse *pParse, struct yColCache *p){
- if( p->tempReg ){
+static void cacheEntryClear(Parse *pParse, int i){
+ if( pParse->aColCache[i].tempReg ){
if( pParse->nTempReg<ArraySize(pParse->aTempReg) ){
- pParse->aTempReg[pParse->nTempReg++] = p->iReg;
+ pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg;
}
- p->tempReg = 0;
+ }
+ pParse->nColCache--;
+ if( i<pParse->nColCache ){
+ pParse->aColCache[i] = pParse->aColCache[pParse->nColCache];
}
}
** that the object will never already be in cache. Verify this guarantee.
*/
#ifndef NDEBUG
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- assert( p->iReg==0 || p->iTable!=iTab || p->iColumn!=iCol );
+ for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
+ assert( p->iTable!=iTab || p->iColumn!=iCol );
}
#endif
- /* Find an empty slot and replace it */
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- if( p->iReg==0 ){
- p->iLevel = pParse->iCacheLevel;
- p->iTable = iTab;
- p->iColumn = iCol;
- p->iReg = iReg;
- p->tempReg = 0;
- p->lru = pParse->iCacheCnt++;
- return;
- }
- }
-
- /* Replace the last recently used */
- minLru = 0x7fffffff;
- idxLru = -1;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- if( p->lru<minLru ){
- idxLru = i;
- minLru = p->lru;
+ /* If the cache is already full, delete the least recently used entry */
+ if( pParse->nColCache>=SQLITE_N_COLCACHE ){
+ minLru = 0x7fffffff;
+ idxLru = -1;
+ for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+ if( p->lru<minLru ){
+ idxLru = i;
+ minLru = p->lru;
+ }
}
- }
- if( ALWAYS(idxLru>=0) ){
p = &pParse->aColCache[idxLru];
- p->iLevel = pParse->iCacheLevel;
- p->iTable = iTab;
- p->iColumn = iCol;
- p->iReg = iReg;
- p->tempReg = 0;
- p->lru = pParse->iCacheCnt++;
- return;
+ }else{
+ p = &pParse->aColCache[pParse->nColCache++];
}
+
+ /* Add the new entry to the end of the cache */
+ p->iLevel = pParse->iCacheLevel;
+ p->iTable = iTab;
+ p->iColumn = iCol;
+ p->iReg = iReg;
+ p->tempReg = 0;
+ p->lru = pParse->iCacheCnt++;
}
/*
** Purge the range of registers from the column cache.
*/
SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse *pParse, int iReg, int nReg){
- int i;
- int iLast = iReg + nReg - 1;
- struct yColCache *p;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- int r = p->iReg;
- if( r>=iReg && r<=iLast ){
- cacheEntryClear(pParse, p);
- p->iReg = 0;
+ int i = 0;
+ while( i<pParse->nColCache ){
+ struct yColCache *p = &pParse->aColCache[i];
+ if( p->iReg >= iReg && p->iReg < iReg+nReg ){
+ cacheEntryClear(pParse, i);
+ }else{
+ i++;
}
}
}
** the cache to the state it was in prior the most recent Push.
*/
SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){
- int i;
- struct yColCache *p;
+ int i = 0;
assert( pParse->iCacheLevel>=1 );
pParse->iCacheLevel--;
#ifdef SQLITE_DEBUG
printf("POP to %d\n", pParse->iCacheLevel);
}
#endif
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- if( p->iReg && p->iLevel>pParse->iCacheLevel ){
- cacheEntryClear(pParse, p);
- p->iReg = 0;
+ while( i<pParse->nColCache ){
+ if( pParse->aColCache[i].iLevel>pParse->iCacheLevel ){
+ cacheEntryClear(pParse, i);
+ }else{
+ i++;
}
}
}
static void sqlite3ExprCachePinRegister(Parse *pParse, int iReg){
int i;
struct yColCache *p;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+ for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
if( p->iReg==iReg ){
p->tempReg = 0;
}
if( iTabCol==XN_EXPR ){
assert( pIdx->aColExpr );
assert( pIdx->aColExpr->nExpr>iIdxCol );
- pParse->iSelfTab = iTabCur;
- sqlite3ExprCode(pParse, pIdx->aColExpr->a[iIdxCol].pExpr, regOut);
+ pParse->iSelfTab = iTabCur + 1;
+ sqlite3ExprCodeCopy(pParse, pIdx->aColExpr->a[iIdxCol].pExpr, regOut);
+ pParse->iSelfTab = 0;
}else{
sqlite3ExprCodeGetColumnOfTable(pParse->pVdbe, pIdx->pTable, iTabCur,
iTabCol, regOut);
int iCol, /* Index of the column to extract */
int regOut /* Extract the value into this register */
){
+ if( pTab==0 ){
+ sqlite3VdbeAddOp3(v, OP_Column, iTabCur, iCol, regOut);
+ return;
+ }
if( iCol<0 || iCol==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Rowid, iTabCur, regOut);
}else{
int op = IsVirtual(pTab) ? OP_VColumn : OP_Column;
int x = iCol;
- if( !HasRowid(pTab) ){
+ if( !HasRowid(pTab) && !IsVirtual(pTab) ){
x = sqlite3ColumnOfIndex(sqlite3PrimaryKeyIndex(pTab), iCol);
}
sqlite3VdbeAddOp3(v, op, iTabCur, x, regOut);
/*
** Generate code that will extract the iColumn-th column from
-** table pTab and store the column value in a register. An effort
-** is made to store the column value in register iReg, but this is
-** not guaranteed. The location of the column value is returned.
+** table pTab and store the column value in a register.
+**
+** An effort is made to store the column value in register iReg. This
+** is not garanteeed for GetColumn() - the result can be stored in
+** any register. But the result is guaranteed to land in register iReg
+** for GetColumnToReg().
**
** There must be an open cursor to pTab in iTable when this routine
** is called. If iColumn<0 then code is generated that extracts the rowid.
int iColumn, /* Index of the table column */
int iTable, /* The cursor pointing to the table */
int iReg, /* Store results here */
- u8 p5 /* P5 value for OP_Column */
+ u8 p5 /* P5 value for OP_Column + FLAGS */
){
Vdbe *v = pParse->pVdbe;
int i;
struct yColCache *p;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- if( p->iReg>0 && p->iTable==iTable && p->iColumn==iColumn ){
+ for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
+ if( p->iTable==iTable && p->iColumn==iColumn ){
p->lru = pParse->iCacheCnt++;
sqlite3ExprCachePinRegister(pParse, p->iReg);
return p->iReg;
}
return iReg;
}
+SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg(
+ Parse *pParse, /* Parsing and code generating context */
+ Table *pTab, /* Description of the table we are reading from */
+ int iColumn, /* Index of the table column */
+ int iTable, /* The cursor pointing to the table */
+ int iReg /* Store results here */
+){
+ int r1 = sqlite3ExprCodeGetColumn(pParse, pTab, iColumn, iTable, iReg, 0);
+ if( r1!=iReg ) sqlite3VdbeAddOp2(pParse->pVdbe, OP_SCopy, r1, iReg);
+}
+
/*
** Clear all column cache entries.
*/
SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){
int i;
- struct yColCache *p;
-#if SQLITE_DEBUG
+#ifdef SQLITE_DEBUG
if( pParse->db->flags & SQLITE_VdbeAddopTrace ){
printf("CLEAR\n");
}
#endif
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
- if( p->iReg ){
- cacheEntryClear(pParse, p);
- p->iReg = 0;
+ for(i=0; i<pParse->nColCache; i++){
+ if( pParse->aColCache[i].tempReg
+ && pParse->nTempReg<ArraySize(pParse->aTempReg)
+ ){
+ pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg;
}
}
+ pParse->nColCache = 0;
}
/*
static int usedAsColumnCache(Parse *pParse, int iFrom, int iTo){
int i;
struct yColCache *p;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+ for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
int r = p->iReg;
if( r>=iFrom && r<=iTo ) return 1; /*NO_TEST*/
}
}
#endif /* SQLITE_DEBUG || SQLITE_COVERAGE_TEST */
+
/*
-** Convert an expression node to a TK_REGISTER
+** Convert a scalar expression node to a TK_REGISTER referencing
+** register iReg. The caller must ensure that iReg already contains
+** the correct value for the expression.
*/
static void exprToRegister(Expr *p, int iReg){
p->op2 = p->op;
ExprClearProperty(p, EP_Skip);
}
+/*
+** Evaluate an expression (either a vector or a scalar expression) and store
+** the result in continguous temporary registers. Return the index of
+** the first register used to store the result.
+**
+** If the returned result register is a temporary scalar, then also write
+** that register number into *piFreeable. If the returned result register
+** is not a temporary or if the expression is a vector set *piFreeable
+** to 0.
+*/
+static int exprCodeVector(Parse *pParse, Expr *p, int *piFreeable){
+ int iResult;
+ int nResult = sqlite3ExprVectorSize(p);
+ if( nResult==1 ){
+ iResult = sqlite3ExprCodeTemp(pParse, p, piFreeable);
+ }else{
+ *piFreeable = 0;
+ if( p->op==TK_SELECT ){
+#if SQLITE_OMIT_SUBQUERY
+ iResult = 0;
+#else
+ iResult = sqlite3CodeSubselect(pParse, p, 0, 0);
+#endif
+ }else{
+ int i;
+ iResult = pParse->nMem+1;
+ pParse->nMem += nResult;
+ for(i=0; i<nResult; i++){
+ sqlite3ExprCodeFactorable(pParse, p->x.pList->a[i].pExpr, i+iResult);
+ }
+ }
+ }
+ return iResult;
+}
+
+
/*
** Generate code into the current Vdbe to evaluate the given
** expression. Attempt to store the results in register "target".
int inReg = target; /* Results stored in register inReg */
int regFree1 = 0; /* If non-zero free this temporary register */
int regFree2 = 0; /* If non-zero free this temporary register */
- int r1, r2, r3, r4; /* Various register numbers */
- sqlite3 *db = pParse->db; /* The database connection */
+ int r1, r2; /* Various register numbers */
Expr tempX; /* Temporary expression node */
+ int p5 = 0;
assert( target>0 && target<=pParse->nMem );
if( v==0 ){
struct AggInfo_col *pCol = &pAggInfo->aCol[pExpr->iAgg];
if( !pAggInfo->directMode ){
assert( pCol->iMem>0 );
- inReg = pCol->iMem;
- break;
+ return pCol->iMem;
}else if( pAggInfo->useSortingIdx ){
sqlite3VdbeAddOp3(v, OP_Column, pAggInfo->sortingIdxPTab,
pCol->iSorterColumn, target);
- break;
+ return target;
}
/* Otherwise, fall thru into the TK_COLUMN case */
}
case TK_COLUMN: {
int iTab = pExpr->iTable;
if( iTab<0 ){
- if( pParse->ckBase>0 ){
+ if( pParse->iSelfTab<0 ){
/* Generating CHECK constraints or inserting into partial index */
- inReg = pExpr->iColumn + pParse->ckBase;
- break;
+ return pExpr->iColumn - pParse->iSelfTab;
}else{
/* Coding an expression that is part of an index where column names
** in the index refer to the table to which the index belongs */
- iTab = pParse->iSelfTab;
+ iTab = pParse->iSelfTab - 1;
}
}
- inReg = sqlite3ExprCodeGetColumn(pParse, pExpr->pTab,
+ return sqlite3ExprCodeGetColumn(pParse, pExpr->pTab,
pExpr->iColumn, iTab, target,
pExpr->op2);
- break;
}
case TK_INTEGER: {
codeInteger(pParse, pExpr, 0, target);
- break;
+ return target;
+ }
+ case TK_TRUEFALSE: {
+ sqlite3VdbeAddOp2(v, OP_Integer, sqlite3ExprTruthValue(pExpr), target);
+ return target;
}
#ifndef SQLITE_OMIT_FLOATING_POINT
case TK_FLOAT: {
assert( !ExprHasProperty(pExpr, EP_IntValue) );
codeReal(v, pExpr->u.zToken, 0, target);
- break;
+ return target;
}
#endif
case TK_STRING: {
assert( !ExprHasProperty(pExpr, EP_IntValue) );
sqlite3VdbeLoadString(v, target, pExpr->u.zToken);
- break;
+ return target;
}
case TK_NULL: {
sqlite3VdbeAddOp2(v, OP_Null, 0, target);
- break;
+ return target;
}
#ifndef SQLITE_OMIT_BLOB_LITERAL
case TK_BLOB: {
assert( z[n]=='\'' );
zBlob = sqlite3HexToBlob(sqlite3VdbeDb(v), z, n);
sqlite3VdbeAddOp4(v, OP_Blob, n/2, target, 0, zBlob, P4_DYNAMIC);
- break;
+ return target;
}
#endif
case TK_VARIABLE: {
assert( pExpr->u.zToken[0]!=0 );
sqlite3VdbeAddOp2(v, OP_Variable, pExpr->iColumn, target);
if( pExpr->u.zToken[1]!=0 ){
- assert( pExpr->u.zToken[0]=='?'
- || strcmp(pExpr->u.zToken, pParse->azVar[pExpr->iColumn-1])==0 );
- sqlite3VdbeChangeP4(v, -1, pParse->azVar[pExpr->iColumn-1], P4_STATIC);
+ const char *z = sqlite3VListNumToName(pParse->pVList, pExpr->iColumn);
+ assert( pExpr->u.zToken[0]=='?' || strcmp(pExpr->u.zToken, z)==0 );
+ pParse->pVList[0] = 0; /* Indicate VList may no longer be enlarged */
+ sqlite3VdbeAppendP4(v, (char*)z, P4_STATIC);
}
- break;
+ return target;
}
case TK_REGISTER: {
- inReg = pExpr->iTable;
- break;
+ return pExpr->iTable;
}
#ifndef SQLITE_OMIT_CAST
case TK_CAST: {
sqlite3AffinityType(pExpr->u.zToken, 0));
testcase( usedAsColumnCache(pParse, inReg, inReg) );
sqlite3ExprCacheAffinityChange(pParse, inReg, 1);
- break;
+ return inReg;
}
#endif /* SQLITE_OMIT_CAST */
+ case TK_IS:
+ case TK_ISNOT:
+ op = (op==TK_IS) ? TK_EQ : TK_NE;
+ p5 = SQLITE_NULLEQ;
+ /* fall-through */
case TK_LT:
case TK_LE:
case TK_GT:
case TK_GE:
case TK_NE:
case TK_EQ: {
- r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
- r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
- codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
- r1, r2, inReg, SQLITE_STOREP2);
- assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
- assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
- assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
- assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
- assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
- assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
- testcase( regFree1==0 );
- testcase( regFree2==0 );
- break;
- }
- case TK_IS:
- case TK_ISNOT: {
- testcase( op==TK_IS );
- testcase( op==TK_ISNOT );
- r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
- r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
- op = (op==TK_IS) ? TK_EQ : TK_NE;
- codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
- r1, r2, inReg, SQLITE_STOREP2 | SQLITE_NULLEQ);
- VdbeCoverageIf(v, op==TK_EQ);
- VdbeCoverageIf(v, op==TK_NE);
- testcase( regFree1==0 );
- testcase( regFree2==0 );
+ Expr *pLeft = pExpr->pLeft;
+ if( sqlite3ExprIsVector(pLeft) ){
+ codeVectorCompare(pParse, pExpr, target, op, p5);
+ }else{
+ r1 = sqlite3ExprCodeTemp(pParse, pLeft, ®Free1);
+ r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
+ codeCompare(pParse, pLeft, pExpr->pRight, op,
+ r1, r2, inReg, SQLITE_STOREP2 | p5);
+ assert(TK_LT==OP_Lt); testcase(op==OP_Lt); VdbeCoverageIf(v,op==OP_Lt);
+ assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
+ assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
+ assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
+ assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
+ assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
+ testcase( regFree1==0 );
+ testcase( regFree2==0 );
+ }
break;
}
case TK_AND:
assert( pLeft );
if( pLeft->op==TK_INTEGER ){
codeInteger(pParse, pLeft, 1, target);
+ return target;
#ifndef SQLITE_OMIT_FLOATING_POINT
}else if( pLeft->op==TK_FLOAT ){
assert( !ExprHasProperty(pExpr, EP_IntValue) );
codeReal(v, pLeft->u.zToken, 1, target);
+ return target;
#endif
}else{
tempX.op = TK_INTEGER;
sqlite3VdbeAddOp3(v, OP_Subtract, r2, r1, target);
testcase( regFree2==0 );
}
- inReg = target;
break;
}
case TK_BITNOT:
assert( TK_NOT==OP_Not ); testcase( op==TK_NOT );
r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
testcase( regFree1==0 );
- inReg = target;
sqlite3VdbeAddOp2(v, op, r1, inReg);
break;
}
+ case TK_TRUTH: {
+ int isTrue; /* IS TRUE or IS NOT TRUE */
+ int bNormal; /* IS TRUE or IS FALSE */
+ r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
+ testcase( regFree1==0 );
+ isTrue = sqlite3ExprTruthValue(pExpr->pRight);
+ bNormal = pExpr->op2==TK_IS;
+ testcase( isTrue && bNormal);
+ testcase( !isTrue && bNormal);
+ sqlite3VdbeAddOp4Int(v, OP_IsTrue, r1, inReg, !isTrue, isTrue ^ bNormal);
+ break;
+ }
case TK_ISNULL:
case TK_NOTNULL: {
int addr;
assert( !ExprHasProperty(pExpr, EP_IntValue) );
sqlite3ErrorMsg(pParse, "misuse of aggregate: %s()", pExpr->u.zToken);
}else{
- inReg = pInfo->aFunc[pExpr->iAgg].iMem;
+ return pInfo->aFunc[pExpr->iAgg].iMem;
}
break;
}
ExprList *pFarg; /* List of function arguments */
int nFarg; /* Number of function arguments */
FuncDef *pDef; /* The function definition object */
- int nId; /* Length of the function name in bytes */
const char *zId; /* The function name */
u32 constMask = 0; /* Mask of function arguments that are constant */
int i; /* Loop counter */
+ sqlite3 *db = pParse->db; /* The database connection */
u8 enc = ENC(db); /* The text encoding used by this database */
CollSeq *pColl = 0; /* A collating sequence */
+ if( ConstFactorOk(pParse) && sqlite3ExprIsConstantNotJoin(pExpr) ){
+ /* SQL functions can be expensive. So try to move constant functions
+ ** out of the inner loop, even if that means an extra OP_Copy. */
+ return sqlite3ExprCodeAtInit(pParse, pExpr, -1);
+ }
assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
if( ExprHasProperty(pExpr, EP_TokenOnly) ){
pFarg = 0;
nFarg = pFarg ? pFarg->nExpr : 0;
assert( !ExprHasProperty(pExpr, EP_IntValue) );
zId = pExpr->u.zToken;
- nId = sqlite3Strlen30(zId);
- pDef = sqlite3FindFunction(db, zId, nId, nFarg, enc, 0);
- if( pDef==0 || pDef->xFunc==0 ){
- sqlite3ErrorMsg(pParse, "unknown function: %.*s()", nId, zId);
+ pDef = sqlite3FindFunction(db, zId, nFarg, enc, 0);
+#ifdef SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION
+ if( pDef==0 && pParse->explain ){
+ pDef = sqlite3FindFunction(db, "unknown", nFarg, enc, 0);
+ }
+#endif
+ if( pDef==0 || pDef->xFinalize!=0 ){
+ sqlite3ErrorMsg(pParse, "unknown function: %s()", zId);
break;
}
*/
if( pDef->funcFlags & SQLITE_FUNC_UNLIKELY ){
assert( nFarg>=1 );
- inReg = sqlite3ExprCodeTarget(pParse, pFarg->a[0].pExpr, target);
- break;
+ return sqlite3ExprCodeTarget(pParse, pFarg->a[0].pExpr, target);
+ }
+
+#ifdef SQLITE_DEBUG
+ /* The AFFINITY() function evaluates to a string that describes
+ ** the type affinity of the argument. This is used for testing of
+ ** the SQLite type logic.
+ */
+ if( pDef->funcFlags & SQLITE_FUNC_AFFINITY ){
+ const char *azAff[] = { "blob", "text", "numeric", "integer", "real" };
+ char aff;
+ assert( nFarg==1 );
+ aff = sqlite3ExprAffinity(pFarg->a[0].pExpr);
+ sqlite3VdbeLoadString(v, target,
+ aff ? azAff[aff-SQLITE_AFF_BLOB] : "none");
+ return target;
}
+#endif
for(i=0; i<nFarg; i++){
if( i<32 && sqlite3ExprIsConstant(pFarg->a[i].pExpr) ){
if( !pColl ) pColl = db->pDfltColl;
sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ);
}
- sqlite3VdbeAddOp4(v, OP_Function0, constMask, r1, target,
- (char*)pDef, P4_FUNCDEF);
- sqlite3VdbeChangeP5(v, (u8)nFarg);
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
+ if( pDef->funcFlags & SQLITE_FUNC_OFFSET ){
+ Expr *pArg = pFarg->a[0].pExpr;
+ if( pArg->op==TK_COLUMN ){
+ sqlite3VdbeAddOp3(v, OP_Offset, pArg->iTable, pArg->iColumn, target);
+ }else{
+ sqlite3VdbeAddOp2(v, OP_Null, 0, target);
+ }
+ }else
+#endif
+ {
+ sqlite3VdbeAddOp4(v, pParse->iSelfTab ? OP_PureFunc0 : OP_Function0,
+ constMask, r1, target, (char*)pDef, P4_FUNCDEF);
+ sqlite3VdbeChangeP5(v, (u8)nFarg);
+ }
if( nFarg && constMask==0 ){
sqlite3ReleaseTempRange(pParse, r1, nFarg);
}
- break;
+ return target;
}
#ifndef SQLITE_OMIT_SUBQUERY
case TK_EXISTS:
case TK_SELECT: {
+ int nCol;
testcase( op==TK_EXISTS );
testcase( op==TK_SELECT );
- inReg = sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+ if( op==TK_SELECT && (nCol = pExpr->x.pSelect->pEList->nExpr)!=1 ){
+ sqlite3SubselectError(pParse, nCol, 1);
+ }else{
+ return sqlite3CodeSubselect(pParse, pExpr, 0, 0);
+ }
break;
}
+ case TK_SELECT_COLUMN: {
+ int n;
+ if( pExpr->pLeft->iTable==0 ){
+ pExpr->pLeft->iTable = sqlite3CodeSubselect(pParse, pExpr->pLeft, 0, 0);
+ }
+ assert( pExpr->iTable==0 || pExpr->pLeft->op==TK_SELECT );
+ if( pExpr->iTable
+ && pExpr->iTable!=(n = sqlite3ExprVectorSize(pExpr->pLeft))
+ ){
+ sqlite3ErrorMsg(pParse, "%d columns assigned %d values",
+ pExpr->iTable, n);
+ }
+ return pExpr->pLeft->iTable + pExpr->iColumn;
+ }
case TK_IN: {
int destIfFalse = sqlite3VdbeMakeLabel(v);
int destIfNull = sqlite3VdbeMakeLabel(v);
sqlite3VdbeResolveLabel(v, destIfFalse);
sqlite3VdbeAddOp2(v, OP_AddImm, target, 0);
sqlite3VdbeResolveLabel(v, destIfNull);
- break;
+ return target;
}
#endif /* SQLITE_OMIT_SUBQUERY */
** Z is stored in pExpr->pList->a[1].pExpr.
*/
case TK_BETWEEN: {
- Expr *pLeft = pExpr->pLeft;
- struct ExprList_item *pLItem = pExpr->x.pList->a;
- Expr *pRight = pLItem->pExpr;
-
- r1 = sqlite3ExprCodeTemp(pParse, pLeft, ®Free1);
- r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2);
- testcase( regFree1==0 );
- testcase( regFree2==0 );
- r3 = sqlite3GetTempReg(pParse);
- r4 = sqlite3GetTempReg(pParse);
- codeCompare(pParse, pLeft, pRight, OP_Ge,
- r1, r2, r3, SQLITE_STOREP2); VdbeCoverage(v);
- pLItem++;
- pRight = pLItem->pExpr;
- sqlite3ReleaseTempReg(pParse, regFree2);
- r2 = sqlite3ExprCodeTemp(pParse, pRight, ®Free2);
- testcase( regFree2==0 );
- codeCompare(pParse, pLeft, pRight, OP_Le, r1, r2, r4, SQLITE_STOREP2);
- VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_And, r3, r4, target);
- sqlite3ReleaseTempReg(pParse, r3);
- sqlite3ReleaseTempReg(pParse, r4);
- break;
+ exprCodeBetween(pParse, pExpr, target, 0, 0);
+ return target;
}
+ case TK_SPAN:
case TK_COLLATE:
case TK_UPLUS: {
- inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target);
- break;
+ return sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target);
}
case TK_TRIGGER: {
break;
}
+ case TK_VECTOR: {
+ sqlite3ErrorMsg(pParse, "row value misused");
+ break;
+ }
+
+ case TK_IF_NULL_ROW: {
+ int addrINR;
+ addrINR = sqlite3VdbeAddOp1(v, OP_IfNullRow, pExpr->iTable);
+ sqlite3ExprCachePush(pParse);
+ inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target);
+ sqlite3ExprCachePop(pParse);
+ sqlite3VdbeJumpHere(v, addrINR);
+ sqlite3VdbeChangeP3(v, addrINR, inReg);
+ break;
+ }
/*
** Form A:
if( (pX = pExpr->pLeft)!=0 ){
tempX = *pX;
testcase( pX->op==TK_COLUMN );
- exprToRegister(&tempX, sqlite3ExprCodeTemp(pParse, pX, ®Free1));
+ exprToRegister(&tempX, exprCodeVector(pParse, &tempX, ®Free1));
testcase( regFree1==0 );
+ memset(&opCompare, 0, sizeof(opCompare));
opCompare.op = TK_EQ;
opCompare.pLeft = &tempX;
pTest = &opCompare;
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, target);
}
- assert( db->mallocFailed || pParse->nErr>0
+ assert( pParse->db->mallocFailed || pParse->nErr>0
|| pParse->iCacheLevel==iCacheLevel );
sqlite3VdbeResolveLabel(v, endLabel);
break;
/*
** Factor out the code of the given expression to initialization time.
+**
+** If regDest>=0 then the result is always stored in that register and the
+** result is not reusable. If regDest<0 then this routine is free to
+** store the value whereever it wants. The register where the expression
+** is stored is returned. When regDest<0, two identical expressions will
+** code to the same register.
*/
-SQLITE_PRIVATE void sqlite3ExprCodeAtInit(
+SQLITE_PRIVATE int sqlite3ExprCodeAtInit(
Parse *pParse, /* Parsing context */
Expr *pExpr, /* The expression to code when the VDBE initializes */
- int regDest, /* Store the value in this register */
- u8 reusable /* True if this expression is reusable */
+ int regDest /* Store the value in this register */
){
ExprList *p;
assert( ConstFactorOk(pParse) );
p = pParse->pConstExpr;
+ if( regDest<0 && p ){
+ struct ExprList_item *pItem;
+ int i;
+ for(pItem=p->a, i=p->nExpr; i>0; pItem++, i--){
+ if( pItem->reusable && sqlite3ExprCompare(0,pItem->pExpr,pExpr,-1)==0 ){
+ return pItem->u.iConstExprReg;
+ }
+ }
+ }
pExpr = sqlite3ExprDup(pParse->db, pExpr, 0);
p = sqlite3ExprListAppend(pParse, p, pExpr);
if( p ){
struct ExprList_item *pItem = &p->a[p->nExpr-1];
+ pItem->reusable = regDest<0;
+ if( regDest<0 ) regDest = ++pParse->nMem;
pItem->u.iConstExprReg = regDest;
- pItem->reusable = reusable;
}
pParse->pConstExpr = p;
+ return regDest;
}
/*
&& pExpr->op!=TK_REGISTER
&& sqlite3ExprIsConstantNotJoin(pExpr)
){
- ExprList *p = pParse->pConstExpr;
- int i;
*pReg = 0;
- if( p ){
- struct ExprList_item *pItem;
- for(pItem=p->a, i=p->nExpr; i>0; pItem++, i--){
- if( pItem->reusable && sqlite3ExprCompare(pItem->pExpr,pExpr,-1)==0 ){
- return pItem->u.iConstExprReg;
- }
- }
- }
- r2 = ++pParse->nMem;
- sqlite3ExprCodeAtInit(pParse, pExpr, r2, 1);
+ r2 = sqlite3ExprCodeAtInit(pParse, pExpr, -1);
}else{
int r1 = sqlite3GetTempReg(pParse);
r2 = sqlite3ExprCodeTarget(pParse, pExpr, r1);
sqlite3VdbeAddOp2(pParse->pVdbe, OP_Copy, pExpr->iTable, target);
}else{
inReg = sqlite3ExprCodeTarget(pParse, pExpr, target);
- assert( pParse->pVdbe || pParse->db->mallocFailed );
+ assert( pParse->pVdbe!=0 || pParse->db->mallocFailed );
if( inReg!=target && pParse->pVdbe ){
sqlite3VdbeAddOp2(pParse->pVdbe, OP_SCopy, inReg, target);
}
}
}
+/*
+** Make a transient copy of expression pExpr and then code it using
+** sqlite3ExprCode(). This routine works just like sqlite3ExprCode()
+** except that the input expression is guaranteed to be unchanged.
+*/
+SQLITE_PRIVATE void sqlite3ExprCodeCopy(Parse *pParse, Expr *pExpr, int target){
+ sqlite3 *db = pParse->db;
+ pExpr = sqlite3ExprDup(db, pExpr, 0);
+ if( !db->mallocFailed ) sqlite3ExprCode(pParse, pExpr, target);
+ sqlite3ExprDelete(db, pExpr);
+}
+
/*
** Generate code that will evaluate expression pExpr and store the
** results in register target. The results are guaranteed to appear
*/
SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse *pParse, Expr *pExpr, int target){
if( pParse->okConstFactor && sqlite3ExprIsConstant(pExpr) ){
- sqlite3ExprCodeAtInit(pParse, pExpr, target, 0);
+ sqlite3ExprCodeAtInit(pParse, pExpr, target);
}else{
sqlite3ExprCode(pParse, pExpr, target);
}
** Generate code that pushes the value of every element of the given
** expression list into a sequence of registers beginning at target.
**
-** Return the number of elements evaluated.
+** Return the number of elements evaluated. The number returned will
+** usually be pList->nExpr but might be reduced if SQLITE_ECEL_OMITREF
+** is defined.
**
** The SQLITE_ECEL_DUP flag prevents the arguments from being
** filled using OP_SCopy. OP_Copy must be used instead.
**
** The SQLITE_ECEL_FACTOR argument allows constant arguments to be
** factored out into initialization code.
+**
+** The SQLITE_ECEL_REF flag means that expressions in the list with
+** ExprList.a[].u.x.iOrderByCol>0 have already been evaluated and stored
+** in registers at srcReg, and so the value can be copied from there.
+** If SQLITE_ECEL_OMITREF is also set, then the values with u.x.iOrderByCol>0
+** are simply omitted rather than being copied from srcReg.
*/
SQLITE_PRIVATE int sqlite3ExprCodeExprList(
Parse *pParse, /* Parsing context */
if( !ConstFactorOk(pParse) ) flags &= ~SQLITE_ECEL_FACTOR;
for(pItem=pList->a, i=0; i<n; i++, pItem++){
Expr *pExpr = pItem->pExpr;
- if( (flags & SQLITE_ECEL_REF)!=0 && (j = pList->a[i].u.x.iOrderByCol)>0 ){
- sqlite3VdbeAddOp2(v, copyOp, j+srcReg-1, target+i);
+ if( (flags & SQLITE_ECEL_REF)!=0 && (j = pItem->u.x.iOrderByCol)>0 ){
+ if( flags & SQLITE_ECEL_OMITREF ){
+ i--;
+ n--;
+ }else{
+ sqlite3VdbeAddOp2(v, copyOp, j+srcReg-1, target+i);
+ }
}else if( (flags & SQLITE_ECEL_FACTOR)!=0 && sqlite3ExprIsConstant(pExpr) ){
- sqlite3ExprCodeAtInit(pParse, pExpr, target+i, 0);
+ sqlite3ExprCodeAtInit(pParse, pExpr, target+i);
}else{
int inReg = sqlite3ExprCodeTarget(pParse, pExpr, target+i);
if( inReg!=target+i ){
**
** Code it as such, taking care to do the common subexpression
** elimination of x.
+**
+** The xJumpIf parameter determines details:
+**
+** NULL: Store the boolean result in reg[dest]
+** sqlite3ExprIfTrue: Jump to dest if true
+** sqlite3ExprIfFalse: Jump to dest if false
+**
+** The jumpIfNull parameter is ignored if xJumpIf is NULL.
*/
static void exprCodeBetween(
Parse *pParse, /* Parsing and code generating context */
Expr *pExpr, /* The BETWEEN expression */
- int dest, /* Jump here if the jump is taken */
- int jumpIfTrue, /* Take the jump if the BETWEEN is true */
+ int dest, /* Jump destination or storage location */
+ void (*xJump)(Parse*,Expr*,int,int), /* Action to take */
int jumpIfNull /* Take the jump if the BETWEEN is NULL */
){
- Expr exprAnd; /* The AND operator in x>=y AND x<=z */
+ Expr exprAnd; /* The AND operator in x>=y AND x<=z */
Expr compLeft; /* The x>=y term */
Expr compRight; /* The x<=z term */
Expr exprX; /* The x subexpression */
int regFree1 = 0; /* Temporary use register */
+
+ memset(&compLeft, 0, sizeof(Expr));
+ memset(&compRight, 0, sizeof(Expr));
+ memset(&exprAnd, 0, sizeof(Expr));
+
assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
exprX = *pExpr->pLeft;
exprAnd.op = TK_AND;
compRight.op = TK_LE;
compRight.pLeft = &exprX;
compRight.pRight = pExpr->x.pList->a[1].pExpr;
- exprToRegister(&exprX, sqlite3ExprCodeTemp(pParse, &exprX, ®Free1));
- if( jumpIfTrue ){
- sqlite3ExprIfTrue(pParse, &exprAnd, dest, jumpIfNull);
- }else{
- sqlite3ExprIfFalse(pParse, &exprAnd, dest, jumpIfNull);
+ exprToRegister(&exprX, exprCodeVector(pParse, &exprX, ®Free1));
+ if( xJump ){
+ xJump(pParse, &exprAnd, dest, jumpIfNull);
+ }else{
+ /* Mark the expression is being from the ON or USING clause of a join
+ ** so that the sqlite3ExprCodeTarget() routine will not attempt to move
+ ** it into the Parse.pConstExpr list. We should use a new bit for this,
+ ** for clarity, but we are out of bits in the Expr.flags field so we
+ ** have to reuse the EP_FromJoin bit. Bummer. */
+ exprX.flags |= EP_FromJoin;
+ sqlite3ExprCodeTarget(pParse, &exprAnd, dest);
}
sqlite3ReleaseTempReg(pParse, regFree1);
/* Ensure adequate test coverage */
- testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1==0 );
- testcase( jumpIfTrue==0 && jumpIfNull==0 && regFree1!=0 );
- testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1==0 );
- testcase( jumpIfTrue==0 && jumpIfNull!=0 && regFree1!=0 );
- testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1==0 );
- testcase( jumpIfTrue!=0 && jumpIfNull==0 && regFree1!=0 );
- testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1==0 );
- testcase( jumpIfTrue!=0 && jumpIfNull!=0 && regFree1!=0 );
+ testcase( xJump==sqlite3ExprIfTrue && jumpIfNull==0 && regFree1==0 );
+ testcase( xJump==sqlite3ExprIfTrue && jumpIfNull==0 && regFree1!=0 );
+ testcase( xJump==sqlite3ExprIfTrue && jumpIfNull!=0 && regFree1==0 );
+ testcase( xJump==sqlite3ExprIfTrue && jumpIfNull!=0 && regFree1!=0 );
+ testcase( xJump==sqlite3ExprIfFalse && jumpIfNull==0 && regFree1==0 );
+ testcase( xJump==sqlite3ExprIfFalse && jumpIfNull==0 && regFree1!=0 );
+ testcase( xJump==sqlite3ExprIfFalse && jumpIfNull!=0 && regFree1==0 );
+ testcase( xJump==sqlite3ExprIfFalse && jumpIfNull!=0 && regFree1!=0 );
+ testcase( xJump==0 );
}
/*
sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull);
break;
}
+ case TK_TRUTH: {
+ int isNot; /* IS NOT TRUE or IS NOT FALSE */
+ int isTrue; /* IS TRUE or IS NOT TRUE */
+ testcase( jumpIfNull==0 );
+ isNot = pExpr->op2==TK_ISNOT;
+ isTrue = sqlite3ExprTruthValue(pExpr->pRight);
+ testcase( isTrue && isNot );
+ testcase( !isTrue && isNot );
+ if( isTrue ^ isNot ){
+ sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest,
+ isNot ? SQLITE_JUMPIFNULL : 0);
+ }else{
+ sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest,
+ isNot ? SQLITE_JUMPIFNULL : 0);
+ }
+ break;
+ }
+ case TK_IS:
+ case TK_ISNOT:
+ testcase( op==TK_IS );
+ testcase( op==TK_ISNOT );
+ op = (op==TK_IS) ? TK_EQ : TK_NE;
+ jumpIfNull = SQLITE_NULLEQ;
+ /* Fall thru */
case TK_LT:
case TK_LE:
case TK_GT:
case TK_GE:
case TK_NE:
case TK_EQ: {
+ if( sqlite3ExprIsVector(pExpr->pLeft) ) goto default_expr;
testcase( jumpIfNull==0 );
r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
- assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
- assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
- testcase( regFree1==0 );
- testcase( regFree2==0 );
- break;
- }
- case TK_IS:
- case TK_ISNOT: {
- testcase( op==TK_IS );
- testcase( op==TK_ISNOT );
- r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
- r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
- op = (op==TK_IS) ? TK_EQ : TK_NE;
- codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
- r1, r2, dest, SQLITE_NULLEQ);
- VdbeCoverageIf(v, op==TK_EQ);
- VdbeCoverageIf(v, op==TK_NE);
+ assert(TK_EQ==OP_Eq); testcase(op==OP_Eq);
+ VdbeCoverageIf(v, op==OP_Eq && jumpIfNull==SQLITE_NULLEQ);
+ VdbeCoverageIf(v, op==OP_Eq && jumpIfNull!=SQLITE_NULLEQ);
+ assert(TK_NE==OP_Ne); testcase(op==OP_Ne);
+ VdbeCoverageIf(v, op==OP_Ne && jumpIfNull==SQLITE_NULLEQ);
+ VdbeCoverageIf(v, op==OP_Ne && jumpIfNull!=SQLITE_NULLEQ);
testcase( regFree1==0 );
testcase( regFree2==0 );
break;
}
case TK_BETWEEN: {
testcase( jumpIfNull==0 );
- exprCodeBetween(pParse, pExpr, dest, 1, jumpIfNull);
+ exprCodeBetween(pParse, pExpr, dest, sqlite3ExprIfTrue, jumpIfNull);
break;
}
#ifndef SQLITE_OMIT_SUBQUERY
}
#endif
default: {
+ default_expr:
if( exprAlwaysTrue(pExpr) ){
sqlite3VdbeGoto(v, dest);
}else if( exprAlwaysFalse(pExpr) ){
sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull);
break;
}
+ case TK_TRUTH: {
+ int isNot; /* IS NOT TRUE or IS NOT FALSE */
+ int isTrue; /* IS TRUE or IS NOT TRUE */
+ testcase( jumpIfNull==0 );
+ isNot = pExpr->op2==TK_ISNOT;
+ isTrue = sqlite3ExprTruthValue(pExpr->pRight);
+ testcase( isTrue && isNot );
+ testcase( !isTrue && isNot );
+ if( isTrue ^ isNot ){
+ /* IS TRUE and IS NOT FALSE */
+ sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest,
+ isNot ? 0 : SQLITE_JUMPIFNULL);
+
+ }else{
+ /* IS FALSE and IS NOT TRUE */
+ sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest,
+ isNot ? 0 : SQLITE_JUMPIFNULL);
+ }
+ break;
+ }
+ case TK_IS:
+ case TK_ISNOT:
+ testcase( pExpr->op==TK_IS );
+ testcase( pExpr->op==TK_ISNOT );
+ op = (pExpr->op==TK_IS) ? TK_NE : TK_EQ;
+ jumpIfNull = SQLITE_NULLEQ;
+ /* Fall thru */
case TK_LT:
case TK_LE:
case TK_GT:
case TK_GE:
case TK_NE:
case TK_EQ: {
+ if( sqlite3ExprIsVector(pExpr->pLeft) ) goto default_expr;
testcase( jumpIfNull==0 );
r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
assert(TK_LE==OP_Le); testcase(op==OP_Le); VdbeCoverageIf(v,op==OP_Le);
assert(TK_GT==OP_Gt); testcase(op==OP_Gt); VdbeCoverageIf(v,op==OP_Gt);
assert(TK_GE==OP_Ge); testcase(op==OP_Ge); VdbeCoverageIf(v,op==OP_Ge);
- assert(TK_EQ==OP_Eq); testcase(op==OP_Eq); VdbeCoverageIf(v,op==OP_Eq);
- assert(TK_NE==OP_Ne); testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne);
- testcase( regFree1==0 );
- testcase( regFree2==0 );
- break;
- }
- case TK_IS:
- case TK_ISNOT: {
- testcase( pExpr->op==TK_IS );
- testcase( pExpr->op==TK_ISNOT );
- r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1);
- r2 = sqlite3ExprCodeTemp(pParse, pExpr->pRight, ®Free2);
- op = (pExpr->op==TK_IS) ? TK_NE : TK_EQ;
- codeCompare(pParse, pExpr->pLeft, pExpr->pRight, op,
- r1, r2, dest, SQLITE_NULLEQ);
- VdbeCoverageIf(v, op==TK_EQ);
- VdbeCoverageIf(v, op==TK_NE);
+ assert(TK_EQ==OP_Eq); testcase(op==OP_Eq);
+ VdbeCoverageIf(v, op==OP_Eq && jumpIfNull!=SQLITE_NULLEQ);
+ VdbeCoverageIf(v, op==OP_Eq && jumpIfNull==SQLITE_NULLEQ);
+ assert(TK_NE==OP_Ne); testcase(op==OP_Ne);
+ VdbeCoverageIf(v, op==OP_Ne && jumpIfNull!=SQLITE_NULLEQ);
+ VdbeCoverageIf(v, op==OP_Ne && jumpIfNull==SQLITE_NULLEQ);
testcase( regFree1==0 );
testcase( regFree2==0 );
break;
}
case TK_BETWEEN: {
testcase( jumpIfNull==0 );
- exprCodeBetween(pParse, pExpr, dest, 0, jumpIfNull);
+ exprCodeBetween(pParse, pExpr, dest, sqlite3ExprIfFalse, jumpIfNull);
break;
}
#ifndef SQLITE_OMIT_SUBQUERY
}
#endif
default: {
+ default_expr:
if( exprAlwaysFalse(pExpr) ){
sqlite3VdbeGoto(v, dest);
}else if( exprAlwaysTrue(pExpr) ){
sqlite3ExprDelete(db, pCopy);
}
+/*
+** Expression pVar is guaranteed to be an SQL variable. pExpr may be any
+** type of expression.
+**
+** If pExpr is a simple SQL value - an integer, real, string, blob
+** or NULL value - then the VDBE currently being prepared is configured
+** to re-prepare each time a new value is bound to variable pVar.
+**
+** Additionally, if pExpr is a simple SQL value and the value is the
+** same as that currently bound to variable pVar, non-zero is returned.
+** Otherwise, if the values are not the same or if pExpr is not a simple
+** SQL value, zero is returned.
+*/
+static int exprCompareVariable(Parse *pParse, Expr *pVar, Expr *pExpr){
+ int res = 0;
+ int iVar;
+ sqlite3_value *pL, *pR = 0;
+
+ sqlite3ValueFromExpr(pParse->db, pExpr, SQLITE_UTF8, SQLITE_AFF_BLOB, &pR);
+ if( pR ){
+ iVar = pVar->iColumn;
+ sqlite3VdbeSetVarmask(pParse->pVdbe, iVar);
+ pL = sqlite3VdbeGetBoundValue(pParse->pReprepare, iVar, SQLITE_AFF_BLOB);
+ if( pL ){
+ if( sqlite3_value_type(pL)==SQLITE_TEXT ){
+ sqlite3_value_text(pL); /* Make sure the encoding is UTF-8 */
+ }
+ res = 0==sqlite3MemCompare(pL, pR, 0);
+ }
+ sqlite3ValueFree(pR);
+ sqlite3ValueFree(pL);
+ }
+
+ return res;
+}
/*
** Do a deep comparison of two expression trees. Return 0 if the two
** this routine is used, it does not hurt to get an extra 2 - that
** just might result in some slightly slower code. But returning
** an incorrect 0 or 1 could lead to a malfunction.
+**
+** If pParse is not NULL then TK_VARIABLE terms in pA with bindings in
+** pParse->pReprepare can be matched against literals in pB. The
+** pParse->pVdbe->expmask bitmask is updated for each variable referenced.
+** If pParse is NULL (the normal case) then any TK_VARIABLE term in
+** Argument pParse should normally be NULL. If it is not NULL and pA or
+** pB causes a return value of 2.
*/
-SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB, int iTab){
+SQLITE_PRIVATE int sqlite3ExprCompare(Parse *pParse, Expr *pA, Expr *pB, int iTab){
u32 combinedFlags;
if( pA==0 || pB==0 ){
return pB==pA ? 0 : 2;
}
+ if( pParse && pA->op==TK_VARIABLE && exprCompareVariable(pParse, pA, pB) ){
+ return 0;
+ }
combinedFlags = pA->flags | pB->flags;
if( combinedFlags & EP_IntValue ){
if( (pA->flags&pB->flags&EP_IntValue)!=0 && pA->u.iValue==pB->u.iValue ){
return 2;
}
if( pA->op!=pB->op ){
- if( pA->op==TK_COLLATE && sqlite3ExprCompare(pA->pLeft, pB, iTab)<2 ){
+ if( pA->op==TK_COLLATE && sqlite3ExprCompare(pParse, pA->pLeft,pB,iTab)<2 ){
return 1;
}
- if( pB->op==TK_COLLATE && sqlite3ExprCompare(pA, pB->pLeft, iTab)<2 ){
+ if( pB->op==TK_COLLATE && sqlite3ExprCompare(pParse, pA,pB->pLeft,iTab)<2 ){
return 1;
}
return 2;
}
- if( pA->op!=TK_COLUMN && ALWAYS(pA->op!=TK_AGG_COLUMN) && pA->u.zToken ){
+ if( pA->op!=TK_COLUMN && pA->op!=TK_AGG_COLUMN && pA->u.zToken ){
if( pA->op==TK_FUNCTION ){
if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2;
}else if( strcmp(pA->u.zToken,pB->u.zToken)!=0 ){
if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2;
if( ALWAYS((combinedFlags & EP_TokenOnly)==0) ){
if( combinedFlags & EP_xIsSelect ) return 2;
- if( sqlite3ExprCompare(pA->pLeft, pB->pLeft, iTab) ) return 2;
- if( sqlite3ExprCompare(pA->pRight, pB->pRight, iTab) ) return 2;
+ if( sqlite3ExprCompare(pParse, pA->pLeft, pB->pLeft, iTab) ) return 2;
+ if( sqlite3ExprCompare(pParse, pA->pRight, pB->pRight, iTab) ) return 2;
if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList, iTab) ) return 2;
if( ALWAYS((combinedFlags & EP_Reduced)==0) && pA->op!=TK_STRING ){
if( pA->iColumn!=pB->iColumn ) return 2;
Expr *pExprA = pA->a[i].pExpr;
Expr *pExprB = pB->a[i].pExpr;
if( pA->a[i].sortOrder!=pB->a[i].sortOrder ) return 1;
- if( sqlite3ExprCompare(pExprA, pExprB, iTab) ) return 1;
+ if( sqlite3ExprCompare(0, pExprA, pExprB, iTab) ) return 1;
}
return 0;
}
+/*
+** Like sqlite3ExprCompare() except COLLATE operators at the top-level
+** are ignored.
+*/
+SQLITE_PRIVATE int sqlite3ExprCompareSkip(Expr *pA, Expr *pB, int iTab){
+ return sqlite3ExprCompare(0,
+ sqlite3ExprSkipCollate(pA),
+ sqlite3ExprSkipCollate(pB),
+ iTab);
+}
+
/*
** Return true if we can prove the pE2 will always be true if pE1 is
** true. Return false if we cannot complete the proof or if pE2 might
** When comparing TK_COLUMN nodes between pE1 and pE2, if pE2 has
** Expr.iTable<0 then assume a table number given by iTab.
**
+** If pParse is not NULL, then the values of bound variables in pE1 are
+** compared against literal values in pE2 and pParse->pVdbe->expmask is
+** modified to record which bound variables are referenced. If pParse
+** is NULL, then false will be returned if pE1 contains any bound variables.
+**
** When in doubt, return false. Returning true might give a performance
** improvement. Returning false might cause a performance reduction, but
** it will always give the correct answer and is hence always safe.
*/
-SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr *pE1, Expr *pE2, int iTab){
- if( sqlite3ExprCompare(pE1, pE2, iTab)==0 ){
+SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Parse *pParse, Expr *pE1, Expr *pE2, int iTab){
+ if( sqlite3ExprCompare(pParse, pE1, pE2, iTab)==0 ){
return 1;
}
if( pE2->op==TK_OR
- && (sqlite3ExprImpliesExpr(pE1, pE2->pLeft, iTab)
- || sqlite3ExprImpliesExpr(pE1, pE2->pRight, iTab) )
+ && (sqlite3ExprImpliesExpr(pParse, pE1, pE2->pLeft, iTab)
+ || sqlite3ExprImpliesExpr(pParse, pE1, pE2->pRight, iTab) )
){
return 1;
}
- if( pE2->op==TK_NOTNULL
- && sqlite3ExprCompare(pE1->pLeft, pE2->pLeft, iTab)==0
- && (pE1->op!=TK_ISNULL && pE1->op!=TK_IS)
- ){
- return 1;
+ if( pE2->op==TK_NOTNULL && pE1->op!=TK_ISNULL && pE1->op!=TK_IS ){
+ Expr *pX = sqlite3ExprSkipCollate(pE1->pLeft);
+ testcase( pX!=pE1->pLeft );
+ if( sqlite3ExprCompare(pParse, pX, pE2->pLeft, iTab)==0 ) return 1;
}
return 0;
}
+/*
+** This is the Expr node callback for sqlite3ExprImpliesNotNullRow().
+** If the expression node requires that the table at pWalker->iCur
+** have a non-NULL column, then set pWalker->eCode to 1 and abort.
+*/
+static int impliesNotNullRow(Walker *pWalker, Expr *pExpr){
+ /* This routine is only called for WHERE clause expressions and so it
+ ** cannot have any TK_AGG_COLUMN entries because those are only found
+ ** in HAVING clauses. We can get a TK_AGG_FUNCTION in a WHERE clause,
+ ** but that is an illegal construct and the query will be rejected at
+ ** a later stage of processing, so the TK_AGG_FUNCTION case does not
+ ** need to be considered here. */
+ assert( pExpr->op!=TK_AGG_COLUMN );
+ testcase( pExpr->op==TK_AGG_FUNCTION );
+
+ if( ExprHasProperty(pExpr, EP_FromJoin) ) return WRC_Prune;
+ switch( pExpr->op ){
+ case TK_ISNULL:
+ case TK_IS:
+ case TK_OR:
+ case TK_CASE:
+ case TK_IN:
+ case TK_FUNCTION:
+ testcase( pExpr->op==TK_ISNULL );
+ testcase( pExpr->op==TK_IS );
+ testcase( pExpr->op==TK_OR );
+ testcase( pExpr->op==TK_CASE );
+ testcase( pExpr->op==TK_IN );
+ testcase( pExpr->op==TK_FUNCTION );
+ return WRC_Prune;
+ case TK_COLUMN:
+ if( pWalker->u.iCur==pExpr->iTable ){
+ pWalker->eCode = 1;
+ return WRC_Abort;
+ }
+ return WRC_Prune;
+ default:
+ return WRC_Continue;
+ }
+}
+
+/*
+** Return true (non-zero) if expression p can only be true if at least
+** one column of table iTab is non-null. In other words, return true
+** if expression p will always be NULL or false if every column of iTab
+** is NULL.
+**
+** False negatives are acceptable. In other words, it is ok to return
+** zero even if expression p will never be true of every column of iTab
+** is NULL. A false negative is merely a missed optimization opportunity.
+**
+** False positives are not allowed, however. A false positive may result
+** in an incorrect answer.
+**
+** Terms of p that are marked with EP_FromJoin (and hence that come from
+** the ON or USING clauses of LEFT JOINS) are excluded from the analysis.
+**
+** This routine is used to check if a LEFT JOIN can be converted into
+** an ordinary JOIN. The p argument is the WHERE clause. If the WHERE
+** clause requires that some column of the right table of the LEFT JOIN
+** be non-NULL, then the LEFT JOIN can be safely converted into an
+** ordinary join.
+*/
+SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr *p, int iTab){
+ Walker w;
+ w.xExprCallback = impliesNotNullRow;
+ w.xSelectCallback = 0;
+ w.xSelectCallback2 = 0;
+ w.eCode = 0;
+ w.u.iCur = iTab;
+ sqlite3WalkExpr(&w, p);
+ return w.eCode;
+}
+
+/*
+** An instance of the following structure is used by the tree walker
+** to determine if an expression can be evaluated by reference to the
+** index only, without having to do a search for the corresponding
+** table entry. The IdxCover.pIdx field is the index. IdxCover.iCur
+** is the cursor for the table.
+*/
+struct IdxCover {
+ Index *pIdx; /* The index to be tested for coverage */
+ int iCur; /* Cursor number for the table corresponding to the index */
+};
+
+/*
+** Check to see if there are references to columns in table
+** pWalker->u.pIdxCover->iCur can be satisfied using the index
+** pWalker->u.pIdxCover->pIdx.
+*/
+static int exprIdxCover(Walker *pWalker, Expr *pExpr){
+ if( pExpr->op==TK_COLUMN
+ && pExpr->iTable==pWalker->u.pIdxCover->iCur
+ && sqlite3ColumnOfIndex(pWalker->u.pIdxCover->pIdx, pExpr->iColumn)<0
+ ){
+ pWalker->eCode = 1;
+ return WRC_Abort;
+ }
+ return WRC_Continue;
+}
+
+/*
+** Determine if an index pIdx on table with cursor iCur contains will
+** the expression pExpr. Return true if the index does cover the
+** expression and false if the pExpr expression references table columns
+** that are not found in the index pIdx.
+**
+** An index covering an expression means that the expression can be
+** evaluated using only the index and without having to lookup the
+** corresponding table entry.
+*/
+SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(
+ Expr *pExpr, /* The index to be tested */
+ int iCur, /* The cursor number for the corresponding table */
+ Index *pIdx /* The index that might be used for coverage */
+){
+ Walker w;
+ struct IdxCover xcov;
+ memset(&w, 0, sizeof(w));
+ xcov.iCur = iCur;
+ xcov.pIdx = pIdx;
+ w.xExprCallback = exprIdxCover;
+ w.u.pIdxCover = &xcov;
+ sqlite3WalkExpr(&w, pExpr);
+ return !w.eCode;
+}
+
+
/*
** An instance of the following structure is used by the tree walker
** to count references to table columns in the arguments of an
Walker w;
struct SrcCount cnt;
assert( pExpr->op==TK_AGG_FUNCTION );
- memset(&w, 0, sizeof(w));
w.xExprCallback = exprSrcCount;
+ w.xSelectCallback = 0;
w.u.pSrcCount = &cnt;
cnt.pSrc = pSrcList;
cnt.nThis = 0;
*/
struct AggInfo_func *pItem = pAggInfo->aFunc;
for(i=0; i<pAggInfo->nFunc; i++, pItem++){
- if( sqlite3ExprCompare(pItem->pExpr, pExpr, -1)==0 ){
+ if( sqlite3ExprCompare(0, pItem->pExpr, pExpr, -1)==0 ){
break;
}
}
pItem->iMem = ++pParse->nMem;
assert( !ExprHasProperty(pExpr, EP_IntValue) );
pItem->pFunc = sqlite3FindFunction(pParse->db,
- pExpr->u.zToken, sqlite3Strlen30(pExpr->u.zToken),
+ pExpr->u.zToken,
pExpr->x.pList ? pExpr->x.pList->nExpr : 0, enc, 0);
if( pExpr->flags & EP_Distinct ){
pItem->iDistinct = pParse->nTab++;
return WRC_Continue;
}
static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){
- UNUSED_PARAMETER(pWalker);
UNUSED_PARAMETER(pSelect);
+ pWalker->walkerDepth++;
return WRC_Continue;
}
+static void analyzeAggregatesInSelectEnd(Walker *pWalker, Select *pSelect){
+ UNUSED_PARAMETER(pSelect);
+ pWalker->walkerDepth--;
+}
/*
** Analyze the pExpr expression looking for aggregate functions and
*/
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){
Walker w;
- memset(&w, 0, sizeof(w));
w.xExprCallback = analyzeAggregate;
w.xSelectCallback = analyzeAggregatesInSelect;
+ w.xSelectCallback2 = analyzeAggregatesInSelectEnd;
+ w.walkerDepth = 0;
w.u.pNC = pNC;
assert( pNC->pSrcList!=0 );
sqlite3WalkExpr(&w, pExpr);
if( iReg && pParse->nTempReg<ArraySize(pParse->aTempReg) ){
int i;
struct yColCache *p;
- for(i=0, p=pParse->aColCache; i<SQLITE_N_COLCACHE; i++, p++){
+ for(i=0, p=pParse->aColCache; i<pParse->nColCache; i++, p++){
if( p->iReg==iReg ){
p->tempReg = 1;
return;
}
/*
-** Allocate or deallocate a block of nReg consecutive registers
+** Allocate or deallocate a block of nReg consecutive registers.
*/
SQLITE_PRIVATE int sqlite3GetTempRange(Parse *pParse, int nReg){
int i, n;
+ if( nReg==1 ) return sqlite3GetTempReg(pParse);
i = pParse->iRangeReg;
n = pParse->nRangeReg;
if( nReg<=n ){
return i;
}
SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse *pParse, int iReg, int nReg){
+ if( nReg==1 ){
+ sqlite3ReleaseTempReg(pParse, iReg);
+ return;
+ }
sqlite3ExprCacheRemove(pParse, iReg, nReg);
if( nReg>pParse->nRangeReg ){
pParse->nRangeReg = nReg;
pParse->nRangeReg = 0;
}
+/*
+** Validate that no temporary register falls within the range of
+** iFirst..iLast, inclusive. This routine is only call from within assert()
+** statements.
+*/
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3NoTempsInRange(Parse *pParse, int iFirst, int iLast){
+ int i;
+ if( pParse->nRangeReg>0
+ && pParse->iRangeReg+pParse->nRangeReg > iFirst
+ && pParse->iRangeReg <= iLast
+ ){
+ return 0;
+ }
+ for(i=0; i<pParse->nTempReg; i++){
+ if( pParse->aTempReg[i]>=iFirst && pParse->aTempReg[i]<=iLast ){
+ return 0;
+ }
+ }
+ return 1;
+}
+#endif /* SQLITE_DEBUG */
+
/************** End of expr.c ************************************************/
/************** Begin file alter.c *******************************************/
/*
** Register built-in functions used to help implement ALTER TABLE
*/
SQLITE_PRIVATE void sqlite3AlterFunctions(void){
- static SQLITE_WSD FuncDef aAlterTableFuncs[] = {
+ static FuncDef aAlterTableFuncs[] = {
FUNCTION(sqlite_rename_table, 2, 0, 0, renameTableFunc),
#ifndef SQLITE_OMIT_TRIGGER
FUNCTION(sqlite_rename_trigger, 2, 0, 0, renameTriggerFunc),
FUNCTION(sqlite_rename_parent, 3, 0, 0, renameParentFunc),
#endif
};
- int i;
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
- FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aAlterTableFuncs);
-
- for(i=0; i<ArraySize(aAlterTableFuncs); i++){
- sqlite3FuncDefInsert(pHash, &aFunc[i]);
- }
+ sqlite3InsertBuiltinFuncs(aAlterTableFuncs, ArraySize(aAlterTableFuncs));
}
/*
** Or, if zName is not a system table, zero is returned.
*/
static int isSystemTable(Parse *pParse, const char *zName){
- if( sqlite3Strlen30(zName)>6 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){
+ if( 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){
sqlite3ErrorMsg(pParse, "table %s may not be altered", zName);
return 1;
}
char *zWhere = 0; /* Where clause to locate temp triggers */
#endif
VTable *pVTab = 0; /* Non-zero if this is a v-tab with an xRename() */
- int savedDbFlags; /* Saved value of db->flags */
+ u32 savedDbFlags; /* Saved value of db->mDbFlags */
- savedDbFlags = db->flags;
+ savedDbFlags = db->mDbFlags;
if( NEVER(db->mallocFailed) ) goto exit_rename_table;
assert( pSrc->nSrc==1 );
assert( sqlite3BtreeHoldsAllMutexes(pParse->db) );
pTab = sqlite3LocateTableItem(pParse, 0, &pSrc->a[0]);
if( !pTab ) goto exit_rename_table;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
- zDb = db->aDb[iDb].zName;
- db->flags |= SQLITE_PreferBuiltin;
+ zDb = db->aDb[iDb].zDbSName;
+ db->mDbFlags |= DBFLAG_PreferBuiltin;
/* Get a NULL terminated version of the new table name. */
zName = sqlite3NameFromToken(db, pName);
sqlite3NestedParse(pParse,
"UPDATE \"%w\".%s SET "
"sql = sqlite_rename_parent(sql, %Q, %Q) "
- "WHERE %s;", zDb, SCHEMA_TABLE(iDb), zTabName, zName, zWhere);
+ "WHERE %s;", zDb, MASTER_NAME, zTabName, zName, zWhere);
sqlite3DbFree(db, zWhere);
}
}
"ELSE name END "
"WHERE tbl_name=%Q COLLATE nocase AND "
"(type='table' OR type='index' OR type='trigger');",
- zDb, SCHEMA_TABLE(iDb), zName, zName, zName,
+ zDb, MASTER_NAME, zName, zName, zName,
#ifndef SQLITE_OMIT_TRIGGER
zName,
#endif
exit_rename_table:
sqlite3SrcListDelete(db, pSrc);
sqlite3DbFree(db, zName);
- db->flags = savedDbFlags;
-}
-
-
-/*
-** Generate code to make sure the file format number is at least minFormat.
-** The generated code will increase the file format number if necessary.
-*/
-SQLITE_PRIVATE void sqlite3MinimumFileFormat(Parse *pParse, int iDb, int minFormat){
- Vdbe *v;
- v = sqlite3GetVdbe(pParse);
- /* The VDBE should have been allocated before this routine is called.
- ** If that allocation failed, we would have quit before reaching this
- ** point */
- if( ALWAYS(v) ){
- int r1 = sqlite3GetTempReg(pParse);
- int r2 = sqlite3GetTempReg(pParse);
- int addr1;
- sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT);
- sqlite3VdbeUsesBtree(v, iDb);
- sqlite3VdbeAddOp2(v, OP_Integer, minFormat, r2);
- addr1 = sqlite3VdbeAddOp3(v, OP_Ge, r2, 0, r1);
- sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, r2);
- sqlite3VdbeJumpHere(v, addr1);
- sqlite3ReleaseTempReg(pParse, r1);
- sqlite3ReleaseTempReg(pParse, r2);
- }
+ db->mDbFlags = savedDbFlags;
}
/*
Column *pCol; /* The new column */
Expr *pDflt; /* Default value for the new column */
sqlite3 *db; /* The database connection; */
+ Vdbe *v = pParse->pVdbe; /* The prepared statement under construction */
+ int r1; /* Temporary registers */
db = pParse->db;
if( pParse->nErr || db->mallocFailed ) return;
+ assert( v!=0 );
pNew = pParse->pNewTable;
assert( pNew );
assert( sqlite3BtreeHoldsAllMutexes(db) );
iDb = sqlite3SchemaToIndex(db, pNew->pSchema);
- zDb = db->aDb[iDb].zName;
+ zDb = db->aDb[iDb].zDbSName;
zTab = &pNew->zName[16]; /* Skip the "sqlite_altertab_" prefix on the name */
pCol = &pNew->aCol[pNew->nCol-1];
pDflt = pCol->pDflt;
** literal NULL, then set pDflt to 0. This simplifies checking
** for an SQL NULL default below.
*/
- if( pDflt && pDflt->op==TK_NULL ){
+ assert( pDflt==0 || pDflt->op==TK_SPAN );
+ if( pDflt && pDflt->pLeft->op==TK_NULL ){
pDflt = 0;
}
rc = sqlite3ValueFromExpr(db, pDflt, SQLITE_UTF8, SQLITE_AFF_BLOB, &pVal);
assert( rc==SQLITE_OK || rc==SQLITE_NOMEM );
if( rc!=SQLITE_OK ){
- db->mallocFailed = 1;
+ assert( db->mallocFailed == 1 );
return;
}
if( !pVal ){
zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n);
if( zCol ){
char *zEnd = &zCol[pColDef->n-1];
- int savedDbFlags = db->flags;
+ u32 savedDbFlags = db->mDbFlags;
while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){
*zEnd-- = '\0';
}
- db->flags |= SQLITE_PreferBuiltin;
+ db->mDbFlags |= DBFLAG_PreferBuiltin;
sqlite3NestedParse(pParse,
"UPDATE \"%w\".%s SET "
"sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) "
"WHERE type = 'table' AND name = %Q",
- zDb, SCHEMA_TABLE(iDb), pNew->addColOffset, zCol, pNew->addColOffset+1,
+ zDb, MASTER_NAME, pNew->addColOffset, zCol, pNew->addColOffset+1,
zTab
);
sqlite3DbFree(db, zCol);
- db->flags = savedDbFlags;
+ db->mDbFlags = savedDbFlags;
}
- /* If the default value of the new column is NULL, then set the file
- ** format to 2. If the default value of the new column is not NULL,
- ** the file format becomes 3.
+ /* Make sure the schema version is at least 3. But do not upgrade
+ ** from less than 3 to 4, as that will corrupt any preexisting DESC
+ ** index.
*/
- sqlite3MinimumFileFormat(pParse, iDb, pDflt ? 3 : 2);
+ r1 = sqlite3GetTempReg(pParse);
+ sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT);
+ sqlite3VdbeUsesBtree(v, iDb);
+ sqlite3VdbeAddOp2(v, OP_AddImm, r1, -2);
+ sqlite3VdbeAddOp2(v, OP_IfPos, r1, sqlite3VdbeCurrentAddr(v)+2);
+ VdbeCoverage(v);
+ sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, 3);
+ sqlite3ReleaseTempReg(pParse, r1);
/* Reload the schema of the modified table. */
reloadTableSchema(pParse, pTab, pTab->zName);
pNew = (Table*)sqlite3DbMallocZero(db, sizeof(Table));
if( !pNew ) goto exit_begin_add_column;
pParse->pNewTable = pNew;
- pNew->nRef = 1;
+ pNew->nTabRef = 1;
pNew->nCol = pTab->nCol;
assert( pNew->nCol>0 );
nAlloc = (((pNew->nCol-1)/8)*8)+8;
pNew->aCol = (Column*)sqlite3DbMallocZero(db, sizeof(Column)*nAlloc);
pNew->zName = sqlite3MPrintf(db, "sqlite_altertab_%s", pTab->zName);
if( !pNew->aCol || !pNew->zName ){
- db->mallocFailed = 1;
+ assert( db->mallocFailed );
goto exit_begin_add_column;
}
memcpy(pNew->aCol, pTab->aCol, sizeof(Column)*pNew->nCol);
Column *pCol = &pNew->aCol[i];
pCol->zName = sqlite3DbStrDup(db, pCol->zName);
pCol->zColl = 0;
- pCol->zType = 0;
pCol->pDflt = 0;
- pCol->zDflt = 0;
}
pNew->pSchema = db->aDb[iDb].pSchema;
pNew->addColOffset = pTab->addColOffset;
- pNew->nRef = 1;
+ pNew->nTabRef = 1;
/* Begin a transaction and increment the schema cookie. */
sqlite3BeginWriteOperation(pParse, 0, iDb);
for(i=0; i<ArraySize(aTable); i++){
const char *zTab = aTable[i].zName;
Table *pStat;
- if( (pStat = sqlite3FindTable(db, zTab, pDb->zName))==0 ){
+ if( (pStat = sqlite3FindTable(db, zTab, pDb->zDbSName))==0 ){
if( aTable[i].zCols ){
/* The sqlite_statN table does not exist. Create it. Note that a
** side-effect of the CREATE TABLE statement is to leave the rootpage
** of the new table in register pParse->regRoot. This is important
** because the OpenWrite opcode below will be needing it. */
sqlite3NestedParse(pParse,
- "CREATE TABLE %Q.%s(%s)", pDb->zName, zTab, aTable[i].zCols
+ "CREATE TABLE %Q.%s(%s)", pDb->zDbSName, zTab, aTable[i].zCols
);
aRoot[i] = pParse->regRoot;
aCreateTbl[i] = OPFLAG_P2ISREG;
if( zWhere ){
sqlite3NestedParse(pParse,
"DELETE FROM %Q.%s WHERE %s=%Q",
- pDb->zName, zTab, zWhereType, zWhere
+ pDb->zDbSName, zTab, zWhereType, zWhere
);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ }else if( db->xPreUpdateCallback ){
+ sqlite3NestedParse(pParse, "DELETE FROM %Q.%s", pDb->zDbSName, zTab);
+#endif
}else{
/* The sqlite_stat[134] table already exists. Delete all rows. */
sqlite3VdbeAddOp2(v, OP_Clear, aRoot[i], iDb);
Stat4Sample *aBest; /* Array of nCol best samples */
int iMin; /* Index in a[] of entry with minimum score */
int nSample; /* Current number of samples */
+ int nMaxEqZero; /* Max leading 0 in anEq[] for any a[] entry */
int iGet; /* Index of current sample accessed by stat_get() */
Stat4Sample *a; /* Array of mxSample Stat4Sample objects */
sqlite3 *db; /* Database connection, for malloc() */
static void sampleSetRowid(sqlite3 *db, Stat4Sample *p, int n, const u8 *pData){
assert( db!=0 );
if( p->nRowid ) sqlite3DbFree(db, p->u.aRowid);
- p->u.aRowid = sqlite3DbMallocRaw(db, n);
+ p->u.aRowid = sqlite3DbMallocRawNN(db, n);
if( p->u.aRowid ){
p->nRowid = n;
memcpy(p->u.aRowid, pData, n);
SQLITE_UTF8, /* funcFlags */
0, /* pUserData */
0, /* pNext */
- statInit, /* xFunc */
- 0, /* xStep */
+ statInit, /* xSFunc */
0, /* xFinalize */
"stat_init", /* zName */
- 0, /* pHash */
- 0 /* pDestructor */
+ {0}
};
#ifdef SQLITE_ENABLE_STAT4
assert( IsStat4 || nEqZero==0 );
#ifdef SQLITE_ENABLE_STAT4
+ /* Stat4Accum.nMaxEqZero is set to the maximum number of leading 0
+ ** values in the anEq[] array of any sample in Stat4Accum.a[]. In
+ ** other words, if nMaxEqZero is n, then it is guaranteed that there
+ ** are no samples with Stat4Sample.anEq[m]==0 for (m>=n). */
+ if( nEqZero>p->nMaxEqZero ){
+ p->nMaxEqZero = nEqZero;
+ }
if( pNew->isPSample==0 ){
Stat4Sample *pUpgrade = 0;
assert( pNew->anEq[pNew->iCol]>0 );
}
}
- /* Update the anEq[] fields of any samples already collected. */
+ /* Check that no sample contains an anEq[] entry with an index of
+ ** p->nMaxEqZero or greater set to zero. */
for(i=p->nSample-1; i>=0; i--){
int j;
- for(j=iChng; j<p->nCol; j++){
- if( p->a[i].anEq[j]==0 ) p->a[i].anEq[j] = p->current.anEq[j];
+ for(j=p->nMaxEqZero; j<p->nCol; j++) assert( p->a[i].anEq[j]>0 );
+ }
+
+ /* Update the anEq[] fields of any samples already collected. */
+ if( iChng<p->nMaxEqZero ){
+ for(i=p->nSample-1; i>=0; i--){
+ int j;
+ for(j=iChng; j<p->nCol; j++){
+ if( p->a[i].anEq[j]==0 ) p->a[i].anEq[j] = p->current.anEq[j];
+ }
}
+ p->nMaxEqZero = iChng;
}
#endif
SQLITE_UTF8, /* funcFlags */
0, /* pUserData */
0, /* pNext */
- statPush, /* xFunc */
- 0, /* xStep */
+ statPush, /* xSFunc */
0, /* xFinalize */
"stat_push", /* zName */
- 0, /* pHash */
- 0 /* pDestructor */
+ {0}
};
#define STAT_GET_STAT1 0 /* "stat" column of stat1 table */
** The content to returned is determined by the parameter J
** which is one of the STAT_GET_xxxx values defined above.
**
+** The stat_get(P,J) function is not available to generic SQL. It is
+** inserted as part of a manually constructed bytecode program. (See
+** the callStatGet() routine below.) It is guaranteed that the P
+** parameter will always be a poiner to a Stat4Accum object, never a
+** NULL.
+**
** If neither STAT3 nor STAT4 are enabled, then J is always
** STAT_GET_STAT1 and is hence omitted and this routine becomes
** a one-parameter function, stat_get(P), that always returns the
SQLITE_UTF8, /* funcFlags */
0, /* pUserData */
0, /* pNext */
- statGet, /* xFunc */
- 0, /* xStep */
+ statGet, /* xSFunc */
0, /* xFinalize */
"stat_get", /* zName */
- 0, /* pHash */
- 0 /* pDestructor */
+ {0}
};
static void callStatGet(Vdbe *v, int regStat4, int iParam, int regOut){
#else
UNUSED_PARAMETER( iParam );
#endif
- sqlite3VdbeAddOp3(v, OP_Function0, 0, regStat4, regOut);
- sqlite3VdbeChangeP4(v, -1, (char*)&statGetFuncdef, P4_FUNCDEF);
+ sqlite3VdbeAddOp4(v, OP_Function0, 0, regStat4, regOut,
+ (char*)&statGetFuncdef, P4_FUNCDEF);
sqlite3VdbeChangeP5(v, 1 + IsStat34);
}
int regIdxname = iMem++; /* Register containing index name */
int regStat1 = iMem++; /* Value for the stat column of sqlite_stat1 */
int regPrev = iMem; /* MUST BE LAST (see below) */
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ Table *pStat1 = 0;
+#endif
pParse->nMem = MAX(pParse->nMem, iMem);
v = sqlite3GetVdbe(pParse);
/* Do not gather statistics on views or virtual tables */
return;
}
- if( sqlite3_strnicmp(pTab->zName, "sqlite_", 7)==0 ){
+ if( sqlite3_strlike("sqlite\\_%", pTab->zName, '\\')==0 ){
/* Do not gather statistics on system tables */
return;
}
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse, SQLITE_ANALYZE, pTab->zName, 0,
- db->aDb[iDb].zName ) ){
+ db->aDb[iDb].zDbSName ) ){
return;
}
#endif
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ if( db->xPreUpdateCallback ){
+ pStat1 = (Table*)sqlite3DbMallocZero(db, sizeof(Table) + 13);
+ if( pStat1==0 ) return;
+ pStat1->zName = (char*)&pStat1[1];
+ memcpy(pStat1->zName, "sqlite_stat1", 13);
+ pStat1->nCol = 3;
+ pStat1->iPKey = -1;
+ sqlite3VdbeAddOp4(pParse->pVdbe, OP_Noop, 0, 0, 0,(char*)pStat1,P4_DYNBLOB);
+ }
+#endif
+
/* Establish a read-lock on the table at the shared-cache level.
** Open a read-only cursor on the table. Also allocate a cursor number
** to use for scanning indexes (iIdxCur). No index cursor is opened at
#endif
sqlite3VdbeAddOp2(v, OP_Integer, nCol, regStat4+1);
sqlite3VdbeAddOp2(v, OP_Integer, pIdx->nKeyCol, regStat4+2);
- sqlite3VdbeAddOp3(v, OP_Function0, 0, regStat4+1, regStat4);
- sqlite3VdbeChangeP4(v, -1, (char*)&statInitFuncdef, P4_FUNCDEF);
+ sqlite3VdbeAddOp4(v, OP_Function0, 0, regStat4+1, regStat4,
+ (char*)&statInitFuncdef, P4_FUNCDEF);
sqlite3VdbeChangeP5(v, 2+IsStat34);
/* Implementation of the following:
if( nColTest>0 ){
int endDistinctTest = sqlite3VdbeMakeLabel(v);
int *aGotoChng; /* Array of jump instruction addresses */
- aGotoChng = sqlite3DbMallocRaw(db, sizeof(int)*nColTest);
+ aGotoChng = sqlite3DbMallocRawNN(db, sizeof(int)*nColTest);
if( aGotoChng==0 ) continue;
/*
regKey = sqlite3GetTempRange(pParse, pPk->nKeyCol);
for(j=0; j<pPk->nKeyCol; j++){
k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[j]);
- assert( k>=0 && k<pTab->nCol );
+ assert( k>=0 && k<pIdx->nColumn );
sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, k, regKey+j);
VdbeComment((v, "%s", pTab->aCol[pPk->aiColumn[j]].zName));
}
}
#endif
assert( regChng==(regStat4+1) );
- sqlite3VdbeAddOp3(v, OP_Function0, 1, regStat4, regTemp);
- sqlite3VdbeChangeP4(v, -1, (char*)&statPushFuncdef, P4_FUNCDEF);
+ sqlite3VdbeAddOp4(v, OP_Function0, 1, regStat4, regTemp,
+ (char*)&statPushFuncdef, P4_FUNCDEF);
sqlite3VdbeChangeP5(v, 2+IsStat34);
sqlite3VdbeAddOp2(v, OP_Next, iIdxCur, addrNextRow); VdbeCoverage(v);
sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0);
sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE);
+#endif
sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
/* Add the entries to the stat3 or stat4 table. */
sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid);
sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE);
+#endif
sqlite3VdbeJumpHere(v, jZeroRows);
}
}
if( i==1 ) continue; /* Do not analyze the TEMP database */
analyzeDatabase(pParse, i);
}
- }else if( pName2->n==0 ){
- /* Form 2: Analyze the database or table named */
- iDb = sqlite3FindDb(db, pName1);
- if( iDb>=0 ){
- analyzeDatabase(pParse, iDb);
- }else{
- z = sqlite3NameFromToken(db, pName1);
- if( z ){
- if( (pIdx = sqlite3FindIndex(db, z, 0))!=0 ){
- analyzeTable(pParse, pIdx->pTable, pIdx);
- }else if( (pTab = sqlite3LocateTable(pParse, 0, z, 0))!=0 ){
- analyzeTable(pParse, pTab, 0);
- }
- sqlite3DbFree(db, z);
- }
- }
+ }else if( pName2->n==0 && (iDb = sqlite3FindDb(db, pName1))>=0 ){
+ /* Analyze the schema named as the argument */
+ analyzeDatabase(pParse, iDb);
}else{
- /* Form 3: Analyze the fully qualified table name */
+ /* Form 3: Analyze the table or index named as an argument */
iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pTableName);
if( iDb>=0 ){
- zDb = db->aDb[iDb].zName;
+ zDb = pName2->n ? db->aDb[iDb].zDbSName : 0;
z = sqlite3NameFromToken(db, pTableName);
if( z ){
if( (pIdx = sqlite3FindIndex(db, z, zDb))!=0 ){
}
sqlite3DbFree(db, z);
}
- }
+ }
+ }
+ if( db->nSqlExec==0 && (v = sqlite3GetVdbe(pParse))!=0 ){
+ sqlite3VdbeAddOp0(v, OP_Expire);
}
- v = sqlite3GetVdbe(pParse);
- if( v ) sqlite3VdbeAddOp0(v, OP_Expire);
}
/*
** the old data with the new instead of allocating a new array. */
if( pIndex->aiRowEst==0 ){
pIndex->aiRowEst = (tRowcnt*)sqlite3MallocZero(sizeof(tRowcnt) * nCol);
- if( pIndex->aiRowEst==0 ) pInfo->db->mallocFailed = 1;
+ if( pIndex->aiRowEst==0 ) sqlite3OomFault(pInfo->db);
}
aiRowEst = pIndex->aiRowEst;
#endif
pIndex->bUnordered = 0;
decodeIntArray((char*)z, nCol, aiRowEst, pIndex->aiRowLogEst, pIndex);
- if( pIndex->pPartIdxWhere==0 ) pTable->nRowLogEst = pIndex->aiRowLogEst[0];
+ pIndex->hasStat1 = 1;
+ if( pIndex->pPartIdxWhere==0 ){
+ pTable->nRowLogEst = pIndex->aiRowLogEst[0];
+ pTable->tabFlags |= TF_HasStat1;
+ }
}else{
Index fakeIdx;
fakeIdx.szIdxRow = pTable->szTabRow;
#endif
decodeIntArray((char*)z, 1, 0, &pTable->nRowLogEst, &fakeIdx);
pTable->szTabRow = fakeIdx.szIdxRow;
+ pTable->tabFlags |= TF_HasStat1;
}
return 0;
}
}
- if( nDist100>nSum100 ){
+ if( nDist100>nSum100 && sumEq<nRow ){
avgEq = ((i64)100 * (nRow - sumEq))/(nDist100 - nSum100);
}
if( avgEq==0 ) avgEq = 1;
Index *pPrevIdx = 0; /* Previous index in the loop */
IndexSample *pSample; /* A slot in pIdx->aSample[] */
- assert( db->lookaside.bEnabled==0 );
+ assert( db->lookaside.bDisable );
zSql = sqlite3MPrintf(db, zSql1, zDb);
if( !zSql ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0);
sqlite3DbFree(db, zSql);
pIdx->aSample = sqlite3DbMallocZero(db, nByte);
if( pIdx->aSample==0 ){
sqlite3_finalize(pStmt);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pSpace = (tRowcnt*)&pIdx->aSample[nSample];
pIdx->aAvgEq = pSpace; pSpace += nIdxCol;
zSql = sqlite3MPrintf(db, zSql2, zDb);
if( !zSql ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0);
sqlite3DbFree(db, zSql);
pSample->p = sqlite3DbMallocZero(db, pSample->n + 2);
if( pSample->p==0 ){
sqlite3_finalize(pStmt);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
+ }
+ if( pSample->n ){
+ memcpy(pSample->p, sqlite3_column_blob(pStmt, 4), pSample->n);
}
- memcpy(pSample->p, sqlite3_column_blob(pStmt, 4), pSample->n);
pIdx->nSample++;
}
rc = sqlite3_finalize(pStmt);
static int loadStat4(sqlite3 *db, const char *zDb){
int rc = SQLITE_OK; /* Result codes from subroutines */
- assert( db->lookaside.bEnabled==0 );
+ assert( db->lookaside.bDisable );
if( sqlite3FindTable(db, "sqlite_stat4", zDb) ){
rc = loadStatTbl(db, 0,
"SELECT idx,count(*) FROM %Q.sqlite_stat4 GROUP BY idx",
analysisInfo sInfo;
HashElem *i;
char *zSql;
- int rc;
+ int rc = SQLITE_OK;
+ Schema *pSchema = db->aDb[iDb].pSchema;
assert( iDb>=0 && iDb<db->nDb );
assert( db->aDb[iDb].pBt!=0 );
/* Clear any prior statistics */
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
- for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){
+ for(i=sqliteHashFirst(&pSchema->tblHash); i; i=sqliteHashNext(i)){
+ Table *pTab = sqliteHashData(i);
+ pTab->tabFlags &= ~TF_HasStat1;
+ }
+ for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){
Index *pIdx = sqliteHashData(i);
- sqlite3DefaultRowEst(pIdx);
+ pIdx->hasStat1 = 0;
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
sqlite3DeleteIndexSamples(db, pIdx);
pIdx->aSample = 0;
#endif
}
- /* Check to make sure the sqlite_stat1 table exists */
+ /* Load new statistics out of the sqlite_stat1 table */
sInfo.db = db;
- sInfo.zDatabase = db->aDb[iDb].zName;
- if( sqlite3FindTable(db, "sqlite_stat1", sInfo.zDatabase)==0 ){
- return SQLITE_ERROR;
+ sInfo.zDatabase = db->aDb[iDb].zDbSName;
+ if( sqlite3FindTable(db, "sqlite_stat1", sInfo.zDatabase)!=0 ){
+ zSql = sqlite3MPrintf(db,
+ "SELECT tbl,idx,stat FROM %Q.sqlite_stat1", sInfo.zDatabase);
+ if( zSql==0 ){
+ rc = SQLITE_NOMEM_BKPT;
+ }else{
+ rc = sqlite3_exec(db, zSql, analysisLoader, &sInfo, 0);
+ sqlite3DbFree(db, zSql);
+ }
}
- /* Load new statistics out of the sqlite_stat1 table */
- zSql = sqlite3MPrintf(db,
- "SELECT tbl,idx,stat FROM %Q.sqlite_stat1", sInfo.zDatabase);
- if( zSql==0 ){
- rc = SQLITE_NOMEM;
- }else{
- rc = sqlite3_exec(db, zSql, analysisLoader, &sInfo, 0);
- sqlite3DbFree(db, zSql);
+ /* Set appropriate defaults on all indexes not in the sqlite_stat1 table */
+ assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+ for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){
+ Index *pIdx = sqliteHashData(i);
+ if( !pIdx->hasStat1 ) sqlite3DefaultRowEst(pIdx);
}
-
/* Load the statistics from the sqlite_stat4 table. */
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
if( rc==SQLITE_OK && OptimizationEnabled(db, SQLITE_Stat34) ){
- int lookasideEnabled = db->lookaside.bEnabled;
- db->lookaside.bEnabled = 0;
+ db->lookaside.bDisable++;
rc = loadStat4(db, sInfo.zDatabase);
- db->lookaside.bEnabled = lookasideEnabled;
+ db->lookaside.bDisable--;
}
- for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){
+ for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){
Index *pIdx = sqliteHashData(i);
sqlite3_free(pIdx->aiRowEst);
pIdx->aiRowEst = 0;
#endif
if( rc==SQLITE_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
return rc;
}
**
** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the
** third argument.
+**
+** If the db->init.reopenMemdb flags is set, then instead of attaching a
+** new database, close the database on db->init.iDb and reopen it as an
+** empty MemDB.
*/
static void attachFunc(
sqlite3_context *context,
char *zPath = 0;
char *zErr = 0;
unsigned int flags;
- Db *aNew;
+ Db *aNew; /* New array of Db pointers */
+ Db *pNew; /* Db object for the newly attached database */
char *zErrDyn = 0;
sqlite3_vfs *pVfs;
UNUSED_PARAMETER(NotUsed);
-
zFile = (const char *)sqlite3_value_text(argv[0]);
zName = (const char *)sqlite3_value_text(argv[1]);
if( zFile==0 ) zFile = "";
if( zName==0 ) zName = "";
- /* Check for the following errors:
- **
- ** * Too many attached databases,
- ** * Transaction currently open
- ** * Specified database name already being used.
- */
- if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){
- zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d",
- db->aLimit[SQLITE_LIMIT_ATTACHED]
- );
- goto attach_error;
- }
- if( !db->autoCommit ){
- zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction");
- goto attach_error;
- }
- for(i=0; i<db->nDb; i++){
- char *z = db->aDb[i].zName;
- assert( z && zName );
- if( sqlite3StrICmp(z, zName)==0 ){
- zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName);
+#ifdef SQLITE_ENABLE_DESERIALIZE
+# define REOPEN_AS_MEMDB(db) (db->init.reopenMemdb)
+#else
+# define REOPEN_AS_MEMDB(db) (0)
+#endif
+
+ if( REOPEN_AS_MEMDB(db) ){
+ /* This is not a real ATTACH. Instead, this routine is being called
+ ** from sqlite3_deserialize() to close database db->init.iDb and
+ ** reopen it as a MemDB */
+ pVfs = sqlite3_vfs_find("memdb");
+ if( pVfs==0 ) return;
+ pNew = &db->aDb[db->init.iDb];
+ if( pNew->pBt ) sqlite3BtreeClose(pNew->pBt);
+ pNew->pBt = 0;
+ pNew->pSchema = 0;
+ rc = sqlite3BtreeOpen(pVfs, "x", db, &pNew->pBt, 0, SQLITE_OPEN_MAIN_DB);
+ }else{
+ /* This is a real ATTACH
+ **
+ ** Check for the following errors:
+ **
+ ** * Too many attached databases,
+ ** * Transaction currently open
+ ** * Specified database name already being used.
+ */
+ if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){
+ zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d",
+ db->aLimit[SQLITE_LIMIT_ATTACHED]
+ );
goto attach_error;
}
+ for(i=0; i<db->nDb; i++){
+ char *z = db->aDb[i].zDbSName;
+ assert( z && zName );
+ if( sqlite3StrICmp(z, zName)==0 ){
+ zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName);
+ goto attach_error;
+ }
+ }
+
+ /* Allocate the new entry in the db->aDb[] array and initialize the schema
+ ** hash tables.
+ */
+ if( db->aDb==db->aDbStatic ){
+ aNew = sqlite3DbMallocRawNN(db, sizeof(db->aDb[0])*3 );
+ if( aNew==0 ) return;
+ memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
+ }else{
+ aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
+ if( aNew==0 ) return;
+ }
+ db->aDb = aNew;
+ pNew = &db->aDb[db->nDb];
+ memset(pNew, 0, sizeof(*pNew));
+
+ /* Open the database file. If the btree is successfully opened, use
+ ** it to obtain the database schema. At this point the schema may
+ ** or may not be initialized.
+ */
+ flags = db->openFlags;
+ rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr);
+ if( rc!=SQLITE_OK ){
+ if( rc==SQLITE_NOMEM ) sqlite3OomFault(db);
+ sqlite3_result_error(context, zErr, -1);
+ sqlite3_free(zErr);
+ return;
+ }
+ assert( pVfs );
+ flags |= SQLITE_OPEN_MAIN_DB;
+ rc = sqlite3BtreeOpen(pVfs, zPath, db, &pNew->pBt, 0, flags);
+ sqlite3_free( zPath );
+ db->nDb++;
}
-
- /* Allocate the new entry in the db->aDb[] array and initialize the schema
- ** hash tables.
- */
- if( db->aDb==db->aDbStatic ){
- aNew = sqlite3DbMallocRaw(db, sizeof(db->aDb[0])*3 );
- if( aNew==0 ) return;
- memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
- }else{
- aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
- if( aNew==0 ) return;
- }
- db->aDb = aNew;
- aNew = &db->aDb[db->nDb];
- memset(aNew, 0, sizeof(*aNew));
-
- /* Open the database file. If the btree is successfully opened, use
- ** it to obtain the database schema. At this point the schema may
- ** or may not be initialized.
- */
- flags = db->openFlags;
- rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr);
- if( rc!=SQLITE_OK ){
- if( rc==SQLITE_NOMEM ) db->mallocFailed = 1;
- sqlite3_result_error(context, zErr, -1);
- sqlite3_free(zErr);
- return;
- }
- assert( pVfs );
- flags |= SQLITE_OPEN_MAIN_DB;
- rc = sqlite3BtreeOpen(pVfs, zPath, db, &aNew->pBt, 0, flags);
- sqlite3_free( zPath );
- db->nDb++;
+ db->skipBtreeMutex = 0;
if( rc==SQLITE_CONSTRAINT ){
rc = SQLITE_ERROR;
zErrDyn = sqlite3MPrintf(db, "database is already attached");
}else if( rc==SQLITE_OK ){
Pager *pPager;
- aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt);
- if( !aNew->pSchema ){
- rc = SQLITE_NOMEM;
- }else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){
+ pNew->pSchema = sqlite3SchemaGet(db, pNew->pBt);
+ if( !pNew->pSchema ){
+ rc = SQLITE_NOMEM_BKPT;
+ }else if( pNew->pSchema->file_format && pNew->pSchema->enc!=ENC(db) ){
zErrDyn = sqlite3MPrintf(db,
"attached databases must use the same text encoding as main database");
rc = SQLITE_ERROR;
}
- sqlite3BtreeEnter(aNew->pBt);
- pPager = sqlite3BtreePager(aNew->pBt);
+ sqlite3BtreeEnter(pNew->pBt);
+ pPager = sqlite3BtreePager(pNew->pBt);
sqlite3PagerLockingMode(pPager, db->dfltLockMode);
- sqlite3BtreeSecureDelete(aNew->pBt,
+ sqlite3BtreeSecureDelete(pNew->pBt,
sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) );
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
- sqlite3BtreeSetPagerFlags(aNew->pBt, 3 | (db->flags & PAGER_FLAGS_MASK));
+ sqlite3BtreeSetPagerFlags(pNew->pBt,
+ PAGER_SYNCHRONOUS_FULL | (db->flags & PAGER_FLAGS_MASK));
#endif
- sqlite3BtreeLeave(aNew->pBt);
+ sqlite3BtreeLeave(pNew->pBt);
}
- aNew->safety_level = 3;
- aNew->zName = sqlite3DbStrDup(db, zName);
- if( rc==SQLITE_OK && aNew->zName==0 ){
- rc = SQLITE_NOMEM;
+ pNew->safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1;
+ if( !REOPEN_AS_MEMDB(db) ) pNew->zDbSName = sqlite3DbStrDup(db, zName);
+ if( rc==SQLITE_OK && pNew->zDbSName==0 ){
+ rc = SQLITE_NOMEM_BKPT;
}
case SQLITE_NULL:
/* No key specified. Use the key from the main database */
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
- if( nKey>0 || sqlite3BtreeGetOptimalReserve(db->aDb[0].pBt)>0 ){
+ if( nKey || sqlite3BtreeGetOptimalReserve(db->aDb[0].pBt)>0 ){
rc = sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
}
break;
/* If the file was opened successfully, read the schema for the new database.
** If this fails, or if opening the file failed, then close the file and
- ** remove the entry from the db->aDb[] array. i.e. put everything back the way
- ** we found it.
+ ** remove the entry from the db->aDb[] array. i.e. put everything back the
+ ** way we found it.
*/
if( rc==SQLITE_OK ){
sqlite3BtreeEnterAll(db);
+ db->init.iDb = 0;
rc = sqlite3Init(db, &zErrDyn);
sqlite3BtreeLeaveAll(db);
+ assert( zErrDyn==0 || rc!=SQLITE_OK );
}
#ifdef SQLITE_USER_AUTHENTICATION
if( rc==SQLITE_OK ){
}
#endif
if( rc ){
- int iDb = db->nDb - 1;
- assert( iDb>=2 );
- if( db->aDb[iDb].pBt ){
- sqlite3BtreeClose(db->aDb[iDb].pBt);
- db->aDb[iDb].pBt = 0;
- db->aDb[iDb].pSchema = 0;
- }
- sqlite3ResetAllSchemasOfConnection(db);
- db->nDb = iDb;
- if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
- db->mallocFailed = 1;
- sqlite3DbFree(db, zErrDyn);
- zErrDyn = sqlite3MPrintf(db, "out of memory");
- }else if( zErrDyn==0 ){
- zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile);
+ if( !REOPEN_AS_MEMDB(db) ){
+ int iDb = db->nDb - 1;
+ assert( iDb>=2 );
+ if( db->aDb[iDb].pBt ){
+ sqlite3BtreeClose(db->aDb[iDb].pBt);
+ db->aDb[iDb].pBt = 0;
+ db->aDb[iDb].pSchema = 0;
+ }
+ sqlite3ResetAllSchemasOfConnection(db);
+ db->nDb = iDb;
+ if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
+ sqlite3OomFault(db);
+ sqlite3DbFree(db, zErrDyn);
+ zErrDyn = sqlite3MPrintf(db, "out of memory");
+ }else if( zErrDyn==0 ){
+ zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile);
+ }
}
goto attach_error;
}
for(i=0; i<db->nDb; i++){
pDb = &db->aDb[i];
if( pDb->pBt==0 ) continue;
- if( sqlite3StrICmp(pDb->zName, zName)==0 ) break;
+ if( sqlite3StrICmp(pDb->zDbSName, zName)==0 ) break;
}
if( i>=db->nDb ){
sqlite3_snprintf(sizeof(zErr),zErr, "cannot detach database %s", zName);
goto detach_error;
}
- if( !db->autoCommit ){
- sqlite3_snprintf(sizeof(zErr), zErr,
- "cannot DETACH database within transaction");
- goto detach_error;
- }
if( sqlite3BtreeIsInReadTrans(pDb->pBt) || sqlite3BtreeIsInBackup(pDb->pBt) ){
sqlite3_snprintf(sizeof(zErr),zErr, "database %s is locked", zName);
goto detach_error;
sqlite3* db = pParse->db;
int regArgs;
+ if( pParse->nErr ) goto attach_end;
memset(&sName, 0, sizeof(NameContext));
sName.pParse = pParse;
assert( v || db->mallocFailed );
if( v ){
- sqlite3VdbeAddOp3(v, OP_Function0, 0, regArgs+3-pFunc->nArg, regArgs+3);
+ sqlite3VdbeAddOp4(v, OP_Function0, 0, regArgs+3-pFunc->nArg, regArgs+3,
+ (char *)pFunc, P4_FUNCDEF);
assert( pFunc->nArg==-1 || (pFunc->nArg&0xff)==pFunc->nArg );
sqlite3VdbeChangeP5(v, (u8)(pFunc->nArg));
- sqlite3VdbeChangeP4(v, -1, (char *)pFunc, P4_FUNCDEF);
-
+
/* Code an OP_Expire. For an ATTACH statement, set P1 to true (expire this
** statement only). For DETACH, set it to false (expire all existing
** statements).
SQLITE_UTF8, /* funcFlags */
0, /* pUserData */
0, /* pNext */
- detachFunc, /* xFunc */
- 0, /* xStep */
+ detachFunc, /* xSFunc */
0, /* xFinalize */
"sqlite_detach", /* zName */
- 0, /* pHash */
- 0 /* pDestructor */
+ {0}
};
codeAttach(pParse, SQLITE_DETACH, &detach_func, pDbname, 0, 0, pDbname);
}
SQLITE_UTF8, /* funcFlags */
0, /* pUserData */
0, /* pNext */
- attachFunc, /* xFunc */
- 0, /* xStep */
+ attachFunc, /* xSFunc */
0, /* xFinalize */
"sqlite_attach", /* zName */
- 0, /* pHash */
- 0 /* pDestructor */
+ {0}
};
codeAttach(pParse, SQLITE_ATTACH, &attach_func, p, p, pDbname, pKey);
}
db = pParse->db;
assert( db->nDb>iDb );
pFix->pParse = pParse;
- pFix->zDb = db->aDb[iDb].zName;
+ pFix->zDb = db->aDb[iDb].zDbSName;
pFix->pSchema = db->aDb[iDb].pSchema;
pFix->zType = zType;
pFix->pName = pName;
if( sqlite3FixExpr(pFix, pSelect->pLimit) ){
return 1;
}
- if( sqlite3FixExpr(pFix, pSelect->pOffset) ){
- return 1;
+ if( pSelect->pWith ){
+ int i;
+ for(i=0; i<pSelect->pWith->nCte; i++){
+ if( sqlite3FixSelect(pFix, pSelect->pWith->a[i].pSelect) ){
+ return 1;
+ }
+ }
}
pSelect = pSelect->pPrior;
}
return 1;
}
}
- if( ExprHasProperty(pExpr, EP_TokenOnly) ) break;
+ if( ExprHasProperty(pExpr, EP_TokenOnly|EP_Leaf) ) break;
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
if( sqlite3FixSelect(pFix, pExpr->x.pSelect) ) return 1;
}else{
** Setting the auth function to NULL disables this hook. The default
** setting of the auth function is NULL.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
sqlite3 *db,
int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
void *pArg
const char *zCol, /* Column name */
int iDb /* Index of containing database. */
){
- sqlite3 *db = pParse->db; /* Database handle */
- char *zDb = db->aDb[iDb].zName; /* Name of attached database */
- int rc; /* Auth callback return code */
+ sqlite3 *db = pParse->db; /* Database handle */
+ char *zDb = db->aDb[iDb].zDbSName; /* Schema name of attached database */
+ int rc; /* Auth callback return code */
+ if( db->init.busy ) return SQLITE_OK;
rc = db->xAuth(db->pAuthArg, SQLITE_READ, zTab,zCol,zDb,pParse->zAuthContext
#ifdef SQLITE_USER_AUTHENTICATION
,db->auth.zAuthUser
#endif
);
if( rc==SQLITE_DENY ){
- if( db->nDb>2 || iDb!=0 ){
- sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol);
- }else{
- sqlite3ErrorMsg(pParse, "access to %s.%s is prohibited", zTab, zCol);
- }
+ char *z = sqlite3_mprintf("%s.%s", zTab, zCol);
+ if( db->nDb>2 || iDb!=0 ) z = sqlite3_mprintf("%s.%z", zDb, z);
+ sqlite3ErrorMsg(pParse, "access to %z is prohibited", z);
pParse->rc = SQLITE_AUTH;
}else if( rc!=SQLITE_IGNORE && rc!=SQLITE_OK ){
sqliteAuthBadReturnCode(pParse);
if( db->xAuth==0 ){
return SQLITE_OK;
}
+
+ /* EVIDENCE-OF: R-43249-19882 The third through sixth parameters to the
+ ** callback are either NULL pointers or zero-terminated strings that
+ ** contain additional details about the action to be authorized.
+ **
+ ** The following testcase() macros show that any of the 3rd through 6th
+ ** parameters can be either NULL or a string. */
+ testcase( zArg1==0 );
+ testcase( zArg2==0 );
+ testcase( zArg3==0 );
+ testcase( pParse->zAuthContext==0 );
+
rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext
#ifdef SQLITE_USER_AUTHENTICATION
,db->auth.zAuthUser
*/
/* #include "sqliteInt.h" */
-/*
-** This routine is called when a new SQL statement is beginning to
-** be parsed. Initialize the pParse structure as needed.
-*/
-SQLITE_PRIVATE void sqlite3BeginParse(Parse *pParse, int explainFlag){
- pParse->explain = (u8)explainFlag;
- pParse->nVar = 0;
-}
-
#ifndef SQLITE_OMIT_SHARED_CACHE
/*
** The TableLock structure is only used by the sqlite3TableLock() and
** codeTableLocks() functions.
*/
struct TableLock {
- int iDb; /* The database containing the table to be locked */
- int iTab; /* The root page of the table to be locked */
- u8 isWriteLock; /* True for write lock. False for a read lock */
- const char *zName; /* Name of the table */
+ int iDb; /* The database containing the table to be locked */
+ int iTab; /* The root page of the table to be locked */
+ u8 isWriteLock; /* True for write lock. False for a read lock */
+ const char *zLockName; /* Name of the table */
};
/*
TableLock *p;
assert( iDb>=0 );
+ if( iDb==1 ) return;
+ if( !sqlite3BtreeSharable(pParse->db->aDb[iDb].pBt) ) return;
for(i=0; i<pToplevel->nTableLock; i++){
p = &pToplevel->aTableLock[i];
if( p->iDb==iDb && p->iTab==iTab ){
p->iDb = iDb;
p->iTab = iTab;
p->isWriteLock = isWriteLock;
- p->zName = zName;
+ p->zLockName = zName;
}else{
pToplevel->nTableLock = 0;
- pToplevel->db->mallocFailed = 1;
+ sqlite3OomFault(pToplevel->db);
}
}
TableLock *p = &pParse->aTableLock[i];
int p1 = p->iDb;
sqlite3VdbeAddOp4(pVdbe, OP_TableLock, p1, p->iTab, p->isWriteLock,
- p->zName, P4_STATIC);
+ p->zLockName, P4_STATIC);
}
}
#else
assert( !pParse->isMultiWrite
|| sqlite3VdbeAssertMayAbort(v, pParse->mayAbort));
if( v ){
- while( sqlite3VdbeDeletePriorOpcode(v, OP_Close) ){}
sqlite3VdbeAddOp0(v, OP_Halt);
#if SQLITE_USER_AUTHENTICATION
if( pParse->nTableLock>0 && db->init.busy==0 ){
sqlite3UserAuthInit(db);
if( db->auth.authLevel<UAUTH_User ){
- pParse->rc = SQLITE_AUTH_USER;
sqlite3ErrorMsg(pParse, "user not authenticated");
+ pParse->rc = SQLITE_AUTH_USER;
return;
}
}
assert( sqlite3VdbeGetOp(v, 0)->opcode==OP_Init );
sqlite3VdbeJumpHere(v, 0);
for(iDb=0; iDb<db->nDb; iDb++){
+ Schema *pSchema;
if( DbMaskTest(pParse->cookieMask, iDb)==0 ) continue;
sqlite3VdbeUsesBtree(v, iDb);
+ pSchema = db->aDb[iDb].pSchema;
sqlite3VdbeAddOp4Int(v,
OP_Transaction, /* Opcode */
iDb, /* P1 */
DbMaskTest(pParse->writeMask,iDb), /* P2 */
- pParse->cookieValue[iDb], /* P3 */
- db->aDb[iDb].pSchema->iGeneration /* P4 */
+ pSchema->schema_cookie, /* P3 */
+ pSchema->iGeneration /* P4 */
);
if( db->init.busy==0 ) sqlite3VdbeChangeP5(v, 1);
VdbeComment((v,
if( pParse->pAinc!=0 && pParse->nTab==0 ) pParse->nTab = 1;
sqlite3VdbeMakeReady(v, pParse);
pParse->rc = SQLITE_DONE;
- pParse->colNamesSet = 0;
}else{
pParse->rc = SQLITE_ERROR;
}
- pParse->nTab = 0;
- pParse->nMem = 0;
- pParse->nSet = 0;
- pParse->nVar = 0;
- DbMaskZero(pParse->cookieMask);
}
/*
char *zSql;
char *zErrMsg = 0;
sqlite3 *db = pParse->db;
-# define SAVE_SZ (sizeof(Parse) - offsetof(Parse,nVar))
- char saveBuf[SAVE_SZ];
+ char saveBuf[PARSE_TAIL_SZ];
if( pParse->nErr ) return;
assert( pParse->nested<10 ); /* Nesting should only be of limited depth */
return; /* A malloc must have failed */
}
pParse->nested++;
- memcpy(saveBuf, &pParse->nVar, SAVE_SZ);
- memset(&pParse->nVar, 0, SAVE_SZ);
+ memcpy(saveBuf, PARSE_TAIL(pParse), PARSE_TAIL_SZ);
+ memset(PARSE_TAIL(pParse), 0, PARSE_TAIL_SZ);
sqlite3RunParser(pParse, zSql, &zErrMsg);
sqlite3DbFree(db, zErrMsg);
sqlite3DbFree(db, zSql);
- memcpy(&pParse->nVar, saveBuf, SAVE_SZ);
+ memcpy(PARSE_TAIL(pParse), saveBuf, PARSE_TAIL_SZ);
pParse->nested--;
}
return 0;
}
#endif
- for(i=OMIT_TEMPDB; i<db->nDb; i++){
- int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */
- if( zDatabase!=0 && sqlite3StrICmp(zDatabase, db->aDb[j].zName) ) continue;
- assert( sqlite3SchemaMutexHeld(db, j, 0) );
- p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName);
- if( p ) break;
+ while(1){
+ for(i=OMIT_TEMPDB; i<db->nDb; i++){
+ int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */
+ if( zDatabase==0 || sqlite3StrICmp(zDatabase, db->aDb[j].zDbSName)==0 ){
+ assert( sqlite3SchemaMutexHeld(db, j, 0) );
+ p = sqlite3HashFind(&db->aDb[j].pSchema->tblHash, zName);
+ if( p ) return p;
+ }
+ }
+ /* Not found. If the name we were looking for was temp.sqlite_master
+ ** then change the name to sqlite_temp_master and try again. */
+ if( sqlite3StrICmp(zName, MASTER_NAME)!=0 ) break;
+ if( sqlite3_stricmp(zDatabase, db->aDb[1].zDbSName)!=0 ) break;
+ zName = TEMP_MASTER_NAME;
}
- return p;
+ return 0;
}
/*
*/
SQLITE_PRIVATE Table *sqlite3LocateTable(
Parse *pParse, /* context in which to report errors */
- int isView, /* True if looking for a VIEW rather than a TABLE */
+ u32 flags, /* LOCATE_VIEW or LOCATE_NOERR */
const char *zName, /* Name of the table we are looking for */
const char *zDbase /* Name of the database. Might be NULL */
){
p = sqlite3FindTable(pParse->db, zName, zDbase);
if( p==0 ){
- const char *zMsg = isView ? "no such view" : "no such table";
+ const char *zMsg = flags & LOCATE_VIEW ? "no such view" : "no such table";
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( sqlite3FindDbName(pParse->db, zDbase)<1 ){
/* If zName is the not the name of a table in the schema created using
** CREATE, then check to see if it is the name of an virtual table that
** can be an eponymous virtual table. */
Module *pMod = (Module*)sqlite3HashFind(&pParse->db->aModule, zName);
+ if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){
+ pMod = sqlite3PragmaVtabRegister(pParse->db, zName);
+ }
if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){
return pMod->pEpoTab;
}
}
#endif
- if( zDbase ){
- sqlite3ErrorMsg(pParse, "%s: %s.%s", zMsg, zDbase, zName);
- }else{
- sqlite3ErrorMsg(pParse, "%s: %s", zMsg, zName);
+ if( (flags & LOCATE_NOERR)==0 ){
+ if( zDbase ){
+ sqlite3ErrorMsg(pParse, "%s: %s.%s", zMsg, zDbase, zName);
+ }else{
+ sqlite3ErrorMsg(pParse, "%s: %s", zMsg, zName);
+ }
+ pParse->checkSchema = 1;
}
- pParse->checkSchema = 1;
- }
-#if SQLITE_USER_AUTHENTICATION
- else if( pParse->db->auth.authLevel<UAUTH_User ){
- sqlite3ErrorMsg(pParse, "user not authenticated");
- p = 0;
}
-#endif
+
return p;
}
*/
SQLITE_PRIVATE Table *sqlite3LocateTableItem(
Parse *pParse,
- int isView,
+ u32 flags,
struct SrcList_item *p
){
const char *zDb;
assert( p->pSchema==0 || p->zDatabase==0 );
if( p->pSchema ){
int iDb = sqlite3SchemaToIndex(pParse->db, p->pSchema);
- zDb = pParse->db->aDb[iDb].zName;
+ zDb = pParse->db->aDb[iDb].zDbSName;
}else{
zDb = p->zDatabase;
}
- return sqlite3LocateTable(pParse, isView, p->zName, zDb);
+ return sqlite3LocateTable(pParse, flags, p->zName, zDb);
}
/*
int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */
Schema *pSchema = db->aDb[j].pSchema;
assert( pSchema );
- if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zName) ) continue;
+ if( zDb && sqlite3StrICmp(zDb, db->aDb[j].zDbSName) ) continue;
assert( sqlite3SchemaMutexHeld(db, j, 0) );
p = sqlite3HashFind(&pSchema->idxHash, zName);
if( p ) break;
sqlite3ExprDelete(db, p->pPartIdxWhere);
sqlite3ExprListDelete(db, p->aColExpr);
sqlite3DbFree(db, p->zColAff);
- if( p->isResized ) sqlite3DbFree(db, p->azColl);
+ if( p->isResized ) sqlite3DbFree(db, (void *)p->azColl);
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
sqlite3_free(p->aiRowEst);
#endif
}
freeIndex(db, pIndex);
}
- db->flags |= SQLITE_InternChanges;
+ db->mDbFlags |= DBFLAG_SchemaChange;
}
/*
for(i=j=2; i<db->nDb; i++){
struct Db *pDb = &db->aDb[i];
if( pDb->pBt==0 ){
- sqlite3DbFree(db, pDb->zName);
- pDb->zName = 0;
+ sqlite3DbFree(db, pDb->zDbSName);
+ pDb->zDbSName = 0;
continue;
}
if( j<i ){
}
j++;
}
- memset(&db->aDb[j], 0, (db->nDb-j)*sizeof(db->aDb[j]));
db->nDb = j;
if( db->nDb<=2 && db->aDb!=db->aDbStatic ){
memcpy(db->aDbStatic, db->aDb, 2*sizeof(db->aDb[0]));
/*
** Reset the schema for the database at index iDb. Also reset the
-** TEMP schema.
+** TEMP schema. The reset is deferred if db->nSchemaLock is not zero.
+** Deferred resets may be run by calling with iDb<0.
*/
SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3 *db, int iDb){
- Db *pDb;
+ int i;
assert( iDb<db->nDb );
- /* Case 1: Reset the single schema identified by iDb */
- pDb = &db->aDb[iDb];
- assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
- assert( pDb->pSchema!=0 );
- sqlite3SchemaClear(pDb->pSchema);
+ if( iDb>=0 ){
+ assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+ DbSetProperty(db, iDb, DB_ResetWanted);
+ DbSetProperty(db, 1, DB_ResetWanted);
+ }
- /* If any database other than TEMP is reset, then also reset TEMP
- ** since TEMP might be holding triggers that reference tables in the
- ** other database.
- */
- if( iDb!=1 ){
- pDb = &db->aDb[1];
- assert( pDb->pSchema!=0 );
- sqlite3SchemaClear(pDb->pSchema);
+ if( db->nSchemaLock==0 ){
+ for(i=0; i<db->nDb; i++){
+ if( DbHasProperty(db, i, DB_ResetWanted) ){
+ sqlite3SchemaClear(db->aDb[i].pSchema);
+ }
+ }
}
- return;
}
/*
SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3 *db){
int i;
sqlite3BtreeEnterAll(db);
+ assert( db->nSchemaLock==0 );
for(i=0; i<db->nDb; i++){
Db *pDb = &db->aDb[i];
if( pDb->pSchema ){
sqlite3SchemaClear(pDb->pSchema);
}
}
- db->flags &= ~SQLITE_InternChanges;
+ db->mDbFlags &= ~DBFLAG_SchemaChange;
sqlite3VtabUnlockList(db);
sqlite3BtreeLeaveAll(db);
sqlite3CollapseDatabaseArray(db);
** This routine is called when a commit occurs.
*/
SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){
- db->flags &= ~SQLITE_InternChanges;
+ db->mDbFlags &= ~DBFLAG_SchemaChange;
}
/*
for(i=0; i<pTable->nCol; i++, pCol++){
sqlite3DbFree(db, pCol->zName);
sqlite3ExprDelete(db, pCol->pDflt);
- sqlite3DbFree(db, pCol->zDflt);
- sqlite3DbFree(db, pCol->zType);
sqlite3DbFree(db, pCol->zColl);
}
sqlite3DbFree(db, pTable->aCol);
** db parameter can be used with db->pnBytesFreed to measure the memory
** used by the Table object.
*/
-SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){
+static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){
Index *pIndex, *pNext;
- TESTONLY( int nLookaside; ) /* Used to verify lookaside not used for schema */
-
- assert( !pTable || pTable->nRef>0 );
-
- /* Do not delete the table until the reference count reaches zero. */
- if( !pTable ) return;
- if( ((!db || db->pnBytesFreed==0) && (--pTable->nRef)>0) ) return;
+#ifdef SQLITE_DEBUG
/* Record the number of outstanding lookaside allocations in schema Tables
** prior to doing any free() operations. Since schema Tables do not use
** lookaside, this number should not change. */
- TESTONLY( nLookaside = (db && (pTable->tabFlags & TF_Ephemeral)==0) ?
- db->lookaside.nOut : 0 );
+ int nLookaside = 0;
+ if( db && (pTable->tabFlags & TF_Ephemeral)==0 ){
+ nLookaside = sqlite3LookasideUsed(db, 0);
+ }
+#endif
/* Delete all indices associated with this table. */
for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){
pNext = pIndex->pNext;
- assert( pIndex->pSchema==pTable->pSchema );
- if( !db || db->pnBytesFreed==0 ){
+ assert( pIndex->pSchema==pTable->pSchema
+ || (IsVirtual(pTable) && pIndex->idxType!=SQLITE_IDXTYPE_APPDEF) );
+ if( (db==0 || db->pnBytesFreed==0) && !IsVirtual(pTable) ){
char *zName = pIndex->zName;
TESTONLY ( Index *pOld = ) sqlite3HashInsert(
&pIndex->pSchema->idxHash, zName, 0
sqlite3DbFree(db, pTable);
/* Verify that no lookaside memory was used by schema tables */
- assert( nLookaside==0 || nLookaside==db->lookaside.nOut );
+ assert( nLookaside==0 || nLookaside==sqlite3LookasideUsed(db,0) );
+}
+SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){
+ /* Do not delete the table until the reference count reaches zero. */
+ if( !pTable ) return;
+ if( ((!db || db->pnBytesFreed==0) && (--pTable->nTabRef)>0) ) return;
+ deleteTable(db, pTable);
}
+
/*
** Unlink the given table from the hash tables and the delete the
** table structure with all its indices and foreign keys.
pDb = &db->aDb[iDb];
p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, 0);
sqlite3DeleteTable(db, p);
- db->flags |= SQLITE_InternChanges;
+ db->mDbFlags |= DBFLAG_SchemaChange;
}
/*
*/
SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *p, int iDb){
Vdbe *v = sqlite3GetVdbe(p);
- sqlite3TableLock(p, iDb, MASTER_ROOT, 1, SCHEMA_TABLE(iDb));
+ sqlite3TableLock(p, iDb, MASTER_ROOT, 1, MASTER_NAME);
sqlite3VdbeAddOp4Int(v, OP_OpenWrite, 0, MASTER_ROOT, iDb, 5);
if( p->nTab==0 ){
p->nTab = 1;
int i = -1; /* Database number */
if( zName ){
Db *pDb;
- int n = sqlite3Strlen30(zName);
for(i=(db->nDb-1), pDb=&db->aDb[i]; i>=0; i--, pDb--){
- if( (!OMIT_TEMPDB || i!=1 ) && n==sqlite3Strlen30(pDb->zName) &&
- 0==sqlite3StrICmp(pDb->zName, zName) ){
- break;
- }
+ if( 0==sqlite3_stricmp(pDb->zDbSName, zName) ) break;
+ /* "main" is always an acceptable alias for the primary database
+ ** even if it has been renamed using SQLITE_DBCONFIG_MAINDBNAME. */
+ if( i==0 && 0==sqlite3_stricmp("main", zName) ) break;
}
}
return i;
int iDb; /* Database holding the object */
sqlite3 *db = pParse->db;
- if( ALWAYS(pName2!=0) && pName2->n>0 ){
+ assert( pName2!=0 );
+ if( pName2->n>0 ){
if( db->init.busy ) {
sqlite3ErrorMsg(pParse, "corrupt database");
return -1;
return -1;
}
}else{
- assert( db->init.iDb==0 || db->init.busy );
+ assert( db->init.iDb==0 || db->init.busy
+ || (db->mDbFlags & DBFLAG_Vacuum)!=0);
iDb = db->init.iDb;
*pUnqual = pName1;
}
int iDb; /* Database number to create the table in */
Token *pName; /* Unqualified name of the table to create */
- /* The table or view name to create is passed to this routine via tokens
- ** pName1 and pName2. If the table name was fully qualified, for example:
- **
- ** CREATE TABLE xxx.yyy (...);
- **
- ** Then pName1 is set to "xxx" and pName2 "yyy". On the other hand if
- ** the table name is not fully qualified, i.e.:
- **
- ** CREATE TABLE yyy(...);
- **
- ** Then pName1 is set to "yyy" and pName2 is "".
- **
- ** The call below sets the pName pointer to point at the token (pName1 or
- ** pName2) that stores the unqualified table name. The variable iDb is
- ** set to the index of the database that the table or view is to be
- ** created in.
- */
- iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName);
- if( iDb<0 ) return;
- if( !OMIT_TEMPDB && isTemp && pName2->n>0 && iDb!=1 ){
- /* If creating a temp table, the name may not be qualified. Unless
- ** the database name is "temp" anyway. */
- sqlite3ErrorMsg(pParse, "temporary table name must be unqualified");
- return;
+ if( db->init.busy && db->init.newTnum==1 ){
+ /* Special case: Parsing the sqlite_master or sqlite_temp_master schema */
+ iDb = db->init.iDb;
+ zName = sqlite3DbStrDup(db, SCHEMA_TABLE(iDb));
+ pName = pName1;
+ }else{
+ /* The common case */
+ iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pName);
+ if( iDb<0 ) return;
+ if( !OMIT_TEMPDB && isTemp && pName2->n>0 && iDb!=1 ){
+ /* If creating a temp table, the name may not be qualified. Unless
+ ** the database name is "temp" anyway. */
+ sqlite3ErrorMsg(pParse, "temporary table name must be unqualified");
+ return;
+ }
+ if( !OMIT_TEMPDB && isTemp ) iDb = 1;
+ zName = sqlite3NameFromToken(db, pName);
}
- if( !OMIT_TEMPDB && isTemp ) iDb = 1;
-
pParse->sNameToken = *pName;
- zName = sqlite3NameFromToken(db, pName);
if( zName==0 ) return;
if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){
goto begin_table_error;
}
if( db->init.iDb==1 ) isTemp = 1;
#ifndef SQLITE_OMIT_AUTHORIZATION
- assert( (isTemp & 1)==isTemp );
+ assert( isTemp==0 || isTemp==1 );
+ assert( isView==0 || isView==1 );
{
- int code;
- char *zDb = db->aDb[iDb].zName;
+ static const u8 aCode[] = {
+ SQLITE_CREATE_TABLE,
+ SQLITE_CREATE_TEMP_TABLE,
+ SQLITE_CREATE_VIEW,
+ SQLITE_CREATE_TEMP_VIEW
+ };
+ char *zDb = db->aDb[iDb].zDbSName;
if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(isTemp), 0, zDb) ){
goto begin_table_error;
}
- if( isView ){
- if( !OMIT_TEMPDB && isTemp ){
- code = SQLITE_CREATE_TEMP_VIEW;
- }else{
- code = SQLITE_CREATE_VIEW;
- }
- }else{
- if( !OMIT_TEMPDB && isTemp ){
- code = SQLITE_CREATE_TEMP_TABLE;
- }else{
- code = SQLITE_CREATE_TABLE;
- }
- }
- if( !isVirtual && sqlite3AuthCheck(pParse, code, zName, 0, zDb) ){
+ if( !isVirtual && sqlite3AuthCheck(pParse, (int)aCode[isTemp+2*isView],
+ zName, 0, zDb) ){
goto begin_table_error;
}
}
** collisions.
*/
if( !IN_DECLARE_VTAB ){
- char *zDb = db->aDb[iDb].zName;
+ char *zDb = db->aDb[iDb].zDbSName;
if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){
goto begin_table_error;
}
pTable = sqlite3DbMallocZero(db, sizeof(Table));
if( pTable==0 ){
- db->mallocFailed = 1;
- pParse->rc = SQLITE_NOMEM;
+ assert( db->mallocFailed );
+ pParse->rc = SQLITE_NOMEM_BKPT;
pParse->nErr++;
goto begin_table_error;
}
pTable->zName = zName;
pTable->iPKey = -1;
pTable->pSchema = db->aDb[iDb].pSchema;
- pTable->nRef = 1;
+ pTable->nTabRef = 1;
+#ifdef SQLITE_DEFAULT_ROWEST
+ pTable->nRowLogEst = sqlite3LogEst(SQLITE_DEFAULT_ROWEST);
+#else
pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
+#endif
assert( pParse->pNewTable==0 );
pParse->pNewTable = pTable;
addr1 = sqlite3VdbeAddOp1(v, OP_If, reg3); VdbeCoverage(v);
fileFormat = (db->flags & SQLITE_LegacyFileFmt)!=0 ?
1 : SQLITE_MAX_FILE_FORMAT;
- sqlite3VdbeAddOp2(v, OP_Integer, fileFormat, reg3);
- sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, reg3);
- sqlite3VdbeAddOp2(v, OP_Integer, ENC(db), reg3);
- sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_TEXT_ENCODING, reg3);
+ sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, fileFormat);
+ sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_TEXT_ENCODING, ENC(db));
sqlite3VdbeJumpHere(v, addr1);
/* This just creates a place-holder record in the sqlite_master table.
}else
#endif
{
- pParse->addrCrTab = sqlite3VdbeAddOp2(v, OP_CreateTable, iDb, reg2);
+ pParse->addrCrTab =
+ sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, reg2, BTREE_INTKEY);
}
sqlite3OpenMasterTable(pParse, iDb);
sqlite3VdbeAddOp2(v, OP_NewRowid, 0, reg1);
return;
}
-/*
-** This macro is used to compare two strings in a case-insensitive manner.
-** It is slightly faster than calling sqlite3StrICmp() directly, but
-** produces larger code.
-**
-** WARNING: This macro is not compatible with the strcmp() family. It
-** returns true if the two strings are equal, otherwise false.
+/* Set properties of a table column based on the (magical)
+** name of the column.
*/
-#define STRICMP(x, y) (\
-sqlite3UpperToLower[*(unsigned char *)(x)]== \
-sqlite3UpperToLower[*(unsigned char *)(y)] \
-&& sqlite3StrICmp((x)+1,(y)+1)==0 )
+#if SQLITE_ENABLE_HIDDEN_COLUMNS
+SQLITE_PRIVATE void sqlite3ColumnPropertiesFromName(Table *pTab, Column *pCol){
+ if( sqlite3_strnicmp(pCol->zName, "__hidden__", 10)==0 ){
+ pCol->colFlags |= COLFLAG_HIDDEN;
+ }else if( pTab && pCol!=pTab->aCol && (pCol[-1].colFlags & COLFLAG_HIDDEN) ){
+ pTab->tabFlags |= TF_OOOHidden;
+ }
+}
+#endif
+
/*
** Add a new column to the table currently being constructed.
** first to get things going. Then this routine is called for each
** column.
*/
-SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName){
+SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName, Token *pType){
Table *p;
int i;
char *z;
+ char *zType;
Column *pCol;
sqlite3 *db = pParse->db;
if( (p = pParse->pNewTable)==0 ) return;
-#if SQLITE_MAX_COLUMN
if( p->nCol+1>db->aLimit[SQLITE_LIMIT_COLUMN] ){
sqlite3ErrorMsg(pParse, "too many columns on %s", p->zName);
return;
}
-#endif
- z = sqlite3NameFromToken(db, pName);
+ z = sqlite3DbMallocRaw(db, pName->n + pType->n + 2);
if( z==0 ) return;
+ memcpy(z, pName->z, pName->n);
+ z[pName->n] = 0;
+ sqlite3Dequote(z);
for(i=0; i<p->nCol; i++){
- if( STRICMP(z, p->aCol[i].zName) ){
+ if( sqlite3_stricmp(z, p->aCol[i].zName)==0 ){
sqlite3ErrorMsg(pParse, "duplicate column name: %s", z);
sqlite3DbFree(db, z);
return;
pCol = &p->aCol[p->nCol];
memset(pCol, 0, sizeof(p->aCol[0]));
pCol->zName = z;
+ sqlite3ColumnPropertiesFromName(p, pCol);
- /* If there is no type specified, columns have the default affinity
- ** 'BLOB'. If there is a type specified, then sqlite3AddColumnType() will
- ** be called next to set pCol->affinity correctly.
- */
- pCol->affinity = SQLITE_AFF_BLOB;
- pCol->szEst = 1;
+ if( pType->n==0 ){
+ /* If there is no type specified, columns have the default affinity
+ ** 'BLOB'. */
+ pCol->affinity = SQLITE_AFF_BLOB;
+ pCol->szEst = 1;
+ }else{
+ zType = z + sqlite3Strlen30(z) + 1;
+ memcpy(zType, pType->z, pType->n);
+ zType[pType->n] = 0;
+ sqlite3Dequote(zType);
+ pCol->affinity = sqlite3AffinityType(zType, &pCol->szEst);
+ pCol->colFlags |= COLFLAG_HASTYPE;
+ }
p->nCol++;
+ pParse->constraintName.n = 0;
}
/*
*/
SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){
Table *p;
+ Column *pCol;
p = pParse->pNewTable;
if( p==0 || NEVER(p->nCol<1) ) return;
- p->aCol[p->nCol-1].notNull = (u8)onError;
+ pCol = &p->aCol[p->nCol-1];
+ pCol->notNull = (u8)onError;
+ p->tabFlags |= TF_HasNotNull;
+
+ /* Set the uniqNotNull flag on any UNIQUE or PK indexes already created
+ ** on this column. */
+ if( pCol->colFlags & COLFLAG_UNIQUE ){
+ Index *pIdx;
+ for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){
+ assert( pIdx->nKeyCol==1 && pIdx->onError!=OE_None );
+ if( pIdx->aiColumn[0]==p->nCol-1 ){
+ pIdx->uniqNotNull = 1;
+ }
+ }
+ }
}
/*
char aff = SQLITE_AFF_NUMERIC;
const char *zChar = 0;
- if( zIn==0 ) return aff;
+ assert( zIn!=0 );
while( zIn[0] ){
h = (h<<8) + sqlite3UpperToLower[(*zIn)&0xff];
zIn++;
return aff;
}
-/*
-** This routine is called by the parser while in the middle of
-** parsing a CREATE TABLE statement. The pFirst token is the first
-** token in the sequence of tokens that describe the type of the
-** column currently under construction. pLast is the last token
-** in the sequence. Use this information to construct a string
-** that contains the typename of the column and store that string
-** in zType.
-*/
-SQLITE_PRIVATE void sqlite3AddColumnType(Parse *pParse, Token *pType){
- Table *p;
- Column *pCol;
-
- p = pParse->pNewTable;
- if( p==0 || NEVER(p->nCol<1) ) return;
- pCol = &p->aCol[p->nCol-1];
- assert( pCol->zType==0 || CORRUPT_DB );
- sqlite3DbFree(pParse->db, pCol->zType);
- pCol->zType = sqlite3NameFromToken(pParse->db, pType);
- pCol->affinity = sqlite3AffinityType(pCol->zType, &pCol->szEst);
-}
-
/*
** The expression is the default value for the most recently added column
** of the table currently under construction.
** This routine is called by the parser while in the middle of
** parsing a CREATE TABLE statement.
*/
-SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse *pParse, ExprSpan *pSpan){
+SQLITE_PRIVATE void sqlite3AddDefaultValue(
+ Parse *pParse, /* Parsing context */
+ Expr *pExpr, /* The parsed expression of the default value */
+ const char *zStart, /* Start of the default value text */
+ const char *zEnd /* First character past end of defaut value text */
+){
Table *p;
Column *pCol;
sqlite3 *db = pParse->db;
p = pParse->pNewTable;
if( p!=0 ){
pCol = &(p->aCol[p->nCol-1]);
- if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr, db->init.busy) ){
+ if( !sqlite3ExprIsConstantOrFunction(pExpr, db->init.busy) ){
sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant",
pCol->zName);
}else{
/* A copy of pExpr is used instead of the original, as pExpr contains
- ** tokens that point to volatile memory. The 'span' of the expression
- ** is required by pragma table_info.
+ ** tokens that point to volatile memory.
*/
+ Expr x;
sqlite3ExprDelete(db, pCol->pDflt);
- pCol->pDflt = sqlite3ExprDup(db, pSpan->pExpr, EXPRDUP_REDUCE);
- sqlite3DbFree(db, pCol->zDflt);
- pCol->zDflt = sqlite3DbStrNDup(db, (char*)pSpan->zStart,
- (int)(pSpan->zEnd - pSpan->zStart));
+ memset(&x, 0, sizeof(x));
+ x.op = TK_SPAN;
+ x.u.zToken = sqlite3DbSpanDup(db, zStart, zEnd);
+ x.pLeft = pExpr;
+ x.flags = EP_Skip;
+ pCol->pDflt = sqlite3ExprDup(db, &x, EXPRDUP_REDUCE);
+ sqlite3DbFree(db, x.u.zToken);
}
}
- sqlite3ExprDelete(db, pSpan->pExpr);
+ sqlite3ExprDelete(db, pExpr);
+}
+
+/*
+** Backwards Compatibility Hack:
+**
+** Historical versions of SQLite accepted strings as column names in
+** indexes and PRIMARY KEY constraints and in UNIQUE constraints. Example:
+**
+** CREATE TABLE xyz(a,b,c,d,e,PRIMARY KEY('a'),UNIQUE('b','c' COLLATE trim)
+** CREATE INDEX abc ON xyz('c','d' DESC,'e' COLLATE nocase DESC);
+**
+** This is goofy. But to preserve backwards compatibility we continue to
+** accept it. This routine does the necessary conversion. It converts
+** the expression given in its argument from a TK_STRING into a TK_ID
+** if the expression is just a TK_STRING with an optional COLLATE clause.
+** If the epxression is anything other than TK_STRING, the expression is
+** unchanged.
+*/
+static void sqlite3StringToId(Expr *p){
+ if( p->op==TK_STRING ){
+ p->op = TK_ID;
+ }else if( p->op==TK_COLLATE && p->pLeft->op==TK_STRING ){
+ p->pLeft->op = TK_ID;
+ }
}
/*
int sortOrder /* SQLITE_SO_ASC or SQLITE_SO_DESC */
){
Table *pTab = pParse->pNewTable;
- char *zType = 0;
+ Column *pCol = 0;
int iCol = -1, i;
int nTerm;
- if( pTab==0 || IN_DECLARE_VTAB ) goto primary_key_exit;
+ if( pTab==0 ) goto primary_key_exit;
if( pTab->tabFlags & TF_HasPrimaryKey ){
sqlite3ErrorMsg(pParse,
"table \"%s\" has more than one primary key", pTab->zName);
pTab->tabFlags |= TF_HasPrimaryKey;
if( pList==0 ){
iCol = pTab->nCol - 1;
- pTab->aCol[iCol].colFlags |= COLFLAG_PRIMKEY;
- zType = pTab->aCol[iCol].zType;
+ pCol = &pTab->aCol[iCol];
+ pCol->colFlags |= COLFLAG_PRIMKEY;
nTerm = 1;
}else{
nTerm = pList->nExpr;
for(i=0; i<nTerm; i++){
Expr *pCExpr = sqlite3ExprSkipCollate(pList->a[i].pExpr);
assert( pCExpr!=0 );
+ sqlite3StringToId(pCExpr);
if( pCExpr->op==TK_ID ){
const char *zCName = pCExpr->u.zToken;
for(iCol=0; iCol<pTab->nCol; iCol++){
if( sqlite3StrICmp(zCName, pTab->aCol[iCol].zName)==0 ){
- pTab->aCol[iCol].colFlags |= COLFLAG_PRIMKEY;
- zType = pTab->aCol[iCol].zType;
+ pCol = &pTab->aCol[iCol];
+ pCol->colFlags |= COLFLAG_PRIMKEY;
break;
}
}
}
}
if( nTerm==1
- && zType && sqlite3StrICmp(zType, "INTEGER")==0
+ && pCol
+ && sqlite3StrICmp(sqlite3ColumnType(pCol,""), "INTEGER")==0
&& sortOrder!=SQLITE_SO_DESC
){
pTab->iPKey = iCol;
"INTEGER PRIMARY KEY");
#endif
}else{
- Index *p;
- p = sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0,
- 0, sortOrder, 0);
- if( p ){
- p->idxType = SQLITE_IDXTYPE_PRIMARYKEY;
- }
+ sqlite3CreateIndex(pParse, 0, 0, 0, pList, onError, 0,
+ 0, sortOrder, 0, SQLITE_IDXTYPE_PRIMARYKEY);
pList = 0;
}
** set back to prior value. But schema changes are infrequent
** and the probability of hitting the same cookie value is only
** 1 chance in 2^32. So we're safe enough.
+**
+** IMPLEMENTATION-OF: R-34230-56049 SQLite automatically increments
+** the schema-version whenever the schema changes.
*/
SQLITE_PRIVATE void sqlite3ChangeCookie(Parse *pParse, int iDb){
- int r1 = sqlite3GetTempReg(pParse);
sqlite3 *db = pParse->db;
Vdbe *v = pParse->pVdbe;
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
- sqlite3VdbeAddOp2(v, OP_Integer, db->aDb[iDb].pSchema->schema_cookie+1, r1);
- sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION, r1);
- sqlite3ReleaseTempReg(pParse, r1);
+ sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION,
+ db->aDb[iDb].pSchema->schema_cookie+1);
}
/*
n += 35 + 6*p->nCol;
zStmt = sqlite3DbMallocRaw(0, n);
if( zStmt==0 ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return 0;
}
sqlite3_snprintf(n, zStmt, "CREATE TABLE ");
assert( pIdx->isResized==0 );
nByte = (sizeof(char*) + sizeof(i16) + 1)*N;
zExtra = sqlite3DbMallocZero(db, nByte);
- if( zExtra==0 ) return SQLITE_NOMEM;
+ if( zExtra==0 ) return SQLITE_NOMEM_BKPT;
memcpy(zExtra, pIdx->azColl, sizeof(char*)*pIdx->nColumn);
- pIdx->azColl = (char**)zExtra;
+ pIdx->azColl = (const char**)zExtra;
zExtra += sizeof(char*)*N;
memcpy(zExtra, pIdx->aiColumn, sizeof(i16)*pIdx->nColumn);
pIdx->aiColumn = (i16*)zExtra;
** are appropriate for a WITHOUT ROWID table instead of a rowid table.
** Changes include:
**
-** (1) Convert the OP_CreateTable into an OP_CreateIndex. There is
-** no rowid btree for a WITHOUT ROWID. Instead, the canonical
-** data storage is a covering index btree.
-** (2) Bypass the creation of the sqlite_master table entry
+** (1) Set all columns of the PRIMARY KEY schema object to be NOT NULL.
+** (2) Convert P3 parameter of the OP_CreateBtree from BTREE_INTKEY
+** into BTREE_BLOBKEY.
+** (3) Bypass the creation of the sqlite_master table entry
** for the PRIMARY KEY as the primary key index is now
** identified by the sqlite_master table entry of the table itself.
-** (3) Set the Index.tnum of the PRIMARY KEY Index object in the
+** (4) Set the Index.tnum of the PRIMARY KEY Index object in the
** schema to the rootpage from the main table.
-** (4) Set all columns of the PRIMARY KEY schema object to be NOT NULL.
** (5) Add all table columns to the PRIMARY KEY Index object
** so that the PRIMARY KEY is a covering index. The surplus
-** columns are part of KeyInfo.nXField and are not used for
+** columns are part of KeyInfo.nAllField and are not used for
** sorting or lookup or uniqueness checks.
** (6) Replace the rowid tail on all automatically generated UNIQUE
** indices with the PRIMARY KEY columns.
+**
+** For virtual tables, only (1) is performed.
*/
static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){
Index *pIdx;
sqlite3 *db = pParse->db;
Vdbe *v = pParse->pVdbe;
- /* Convert the OP_CreateTable opcode that would normally create the
- ** root-page for the table into an OP_CreateIndex opcode. The index
- ** created will become the PRIMARY KEY index.
+ /* Mark every PRIMARY KEY column as NOT NULL (except for imposter tables)
+ */
+ if( !db->init.imposterTable ){
+ for(i=0; i<pTab->nCol; i++){
+ if( (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0 ){
+ pTab->aCol[i].notNull = OE_Abort;
+ }
+ }
+ }
+
+ /* The remaining transformations only apply to b-tree tables, not to
+ ** virtual tables */
+ if( IN_DECLARE_VTAB ) return;
+
+ /* Convert the P3 operand of the OP_CreateBtree opcode from BTREE_INTKEY
+ ** into BTREE_BLOBKEY.
*/
if( pParse->addrCrTab ){
assert( v );
- sqlite3VdbeChangeOpcode(v, pParse->addrCrTab, OP_CreateIndex);
+ sqlite3VdbeChangeP3(v, pParse->addrCrTab, BTREE_BLOBKEY);
}
/* Locate the PRIMARY KEY index. Or, if this table was originally
if( pTab->iPKey>=0 ){
ExprList *pList;
Token ipkToken;
- ipkToken.z = pTab->aCol[pTab->iPKey].zName;
- ipkToken.n = sqlite3Strlen30(ipkToken.z);
+ sqlite3TokenInit(&ipkToken, pTab->aCol[pTab->iPKey].zName);
pList = sqlite3ExprListAppend(pParse, 0,
sqlite3ExprAlloc(db, TK_ID, &ipkToken, 0));
if( pList==0 ) return;
pList->a[0].sortOrder = pParse->iPkSortOrder;
assert( pParse->pNewTable==pTab );
- pPk = sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0);
- if( pPk==0 ) return;
- pPk->idxType = SQLITE_IDXTYPE_PRIMARYKEY;
+ sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0,
+ SQLITE_IDXTYPE_PRIMARYKEY);
+ if( db->mallocFailed ) return;
+ pPk = sqlite3PrimaryKeyIndex(pTab);
pTab->iPKey = -1;
}else{
pPk = sqlite3PrimaryKeyIndex(pTab);
- /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
- ** table entry. This is only required if currently generating VDBE
- ** code for a CREATE TABLE (not when parsing one as part of reading
- ** a database schema). */
- if( v ){
- assert( db->init.busy==0 );
- sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
- }
-
/*
** Remove all redundant columns from the PRIMARY KEY. For example, change
** "PRIMARY KEY(a,b,a,b,c,b,c,d)" into just "PRIMARY KEY(a,b,c,d)". Later
}
pPk->nKeyCol = j;
}
- pPk->isCovering = 1;
assert( pPk!=0 );
+ pPk->isCovering = 1;
+ if( !db->init.imposterTable ) pPk->uniqNotNull = 1;
nPk = pPk->nKeyCol;
- /* Make sure every column of the PRIMARY KEY is NOT NULL. (Except,
- ** do not enforce this for imposter tables.) */
- if( !db->init.imposterTable ){
- for(i=0; i<nPk; i++){
- pTab->aCol[pPk->aiColumn[i]].notNull = 1;
- }
- pPk->uniqNotNull = 1;
+ /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master
+ ** table entry. This is only required if currently generating VDBE
+ ** code for a CREATE TABLE (not when parsing one as part of reading
+ ** a database schema). */
+ if( v && pPk->tnum>0 ){
+ assert( db->init.busy==0 );
+ sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto);
}
/* The root page of the PRIMARY KEY is the table root page */
if( !hasColumn(pPk->aiColumn, j, i) ){
assert( j<pPk->nColumn );
pPk->aiColumn[j] = i;
- pPk->azColl[j] = "BINARY";
+ pPk->azColl[j] = sqlite3StrBINARY;
j++;
}
}
p = pParse->pNewTable;
if( p==0 ) return;
- assert( !db->init.busy || !pSelect );
-
/* If the db->init.busy is 1 it means we are reading the SQL off the
** "sqlite_master" or "sqlite_temp_master" table on the disk.
** So do not write to the disk again. Extract the root page number
** for the table from the db->init.newTnum field. (The page number
** should have been put there by the sqliteOpenCb routine.)
+ **
+ ** If the root page number is 1, that means this is the sqlite_master
+ ** table itself. So mark it read-only.
*/
if( db->init.busy ){
+ if( pSelect ){
+ sqlite3ErrorMsg(pParse, "");
+ return;
+ }
p->tnum = db->init.newTnum;
+ if( p->tnum==1 ) p->tabFlags |= TF_Readonly;
}
/* Special processing for WITHOUT ROWID Tables */
pParse->nTab = 2;
addrTop = sqlite3VdbeCurrentAddr(v) + 1;
sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, addrTop);
- sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield);
- sqlite3Select(pParse, pSelect, &dest);
- sqlite3VdbeAddOp1(v, OP_EndCoroutine, regYield);
- sqlite3VdbeJumpHere(v, addrTop - 1);
if( pParse->nErr ) return;
pSelTab = sqlite3ResultSetOfSelect(pParse, pSelect);
if( pSelTab==0 ) return;
pSelTab->nCol = 0;
pSelTab->aCol = 0;
sqlite3DeleteTable(db, pSelTab);
+ sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield);
+ sqlite3Select(pParse, pSelect, &dest);
+ if( pParse->nErr ) return;
+ sqlite3VdbeEndCoroutine(v, regYield);
+ sqlite3VdbeJumpHere(v, addrTop - 1);
addrInsLoop = sqlite3VdbeAddOp1(v, OP_Yield, dest.iSDParm);
VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_MakeRecord, dest.iSdst, dest.nSdst, regRec);
"UPDATE %Q.%s "
"SET type='%s', name=%Q, tbl_name=%Q, rootpage=#%d, sql=%Q "
"WHERE rowid=#%d",
- db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+ db->aDb[iDb].zDbSName, MASTER_NAME,
zType,
p->zName,
p->zName,
/* Check to see if we need to create an sqlite_sequence table for
** keeping track of autoincrement keys.
*/
- if( p->tabFlags & TF_Autoincrement ){
+ if( (p->tabFlags & TF_Autoincrement)!=0 ){
Db *pDb = &db->aDb[iDb];
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
if( pDb->pSchema->pSeqTab==0 ){
sqlite3NestedParse(pParse,
"CREATE TABLE %Q.sqlite_sequence(name,seq)",
- pDb->zName
+ pDb->zDbSName
);
}
}
pOld = sqlite3HashInsert(&pSchema->tblHash, p->zName, p);
if( pOld ){
assert( p==pOld ); /* Malloc must have failed inside HashInsert() */
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return;
}
pParse->pNewTable = 0;
- db->flags |= SQLITE_InternChanges;
+ db->mDbFlags |= DBFLAG_SchemaChange;
#ifndef SQLITE_OMIT_ALTERTABLE
if( !p->pSelect ){
** the end.
*/
sEnd = pParse->sLastToken;
- assert( sEnd.z[0]!=0 );
+ assert( sEnd.z[0]!=0 || sEnd.n==0 );
if( sEnd.z[0]!=';' ){
sEnd.z += sEnd.n;
}
int nErr = 0; /* Number of errors encountered */
int n; /* Temporarily holds the number of cursors assigned */
sqlite3 *db = pParse->db; /* Database connection for malloc errors */
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ int rc;
+#endif
+#ifndef SQLITE_OMIT_AUTHORIZATION
sqlite3_xauth xAuth; /* Saved xAuth pointer */
- u8 bEnabledLA; /* Saved db->lookaside.bEnabled state */
+#endif
assert( pTable );
#ifndef SQLITE_OMIT_VIRTUALTABLE
- if( sqlite3VtabCallConnect(pParse, pTable) ){
- return SQLITE_ERROR;
+ db->nSchemaLock++;
+ rc = sqlite3VtabCallConnect(pParse, pTable);
+ db->nSchemaLock--;
+ if( rc ){
+ return 1;
}
if( IsVirtual(pTable) ) return 0;
#endif
** statement that defines the view.
*/
assert( pTable->pSelect );
- bEnabledLA = db->lookaside.bEnabled;
- if( pTable->pCheck ){
- db->lookaside.bEnabled = 0;
- sqlite3ColumnsFromExprList(pParse, pTable->pCheck,
- &pTable->nCol, &pTable->aCol);
- }else{
- pSel = sqlite3SelectDup(db, pTable->pSelect, 0);
- if( pSel ){
- n = pParse->nTab;
- sqlite3SrcListAssignCursors(pParse, pSel->pSrc);
- pTable->nCol = -1;
- db->lookaside.bEnabled = 0;
+ pSel = sqlite3SelectDup(db, pTable->pSelect, 0);
+ if( pSel ){
+ n = pParse->nTab;
+ sqlite3SrcListAssignCursors(pParse, pSel->pSrc);
+ pTable->nCol = -1;
+ db->lookaside.bDisable++;
#ifndef SQLITE_OMIT_AUTHORIZATION
- xAuth = db->xAuth;
- db->xAuth = 0;
- pSelTab = sqlite3ResultSetOfSelect(pParse, pSel);
- db->xAuth = xAuth;
+ xAuth = db->xAuth;
+ db->xAuth = 0;
+ pSelTab = sqlite3ResultSetOfSelect(pParse, pSel);
+ db->xAuth = xAuth;
#else
- pSelTab = sqlite3ResultSetOfSelect(pParse, pSel);
-#endif
- pParse->nTab = n;
- if( pSelTab ){
- assert( pTable->aCol==0 );
- pTable->nCol = pSelTab->nCol;
- pTable->aCol = pSelTab->aCol;
- pSelTab->nCol = 0;
- pSelTab->aCol = 0;
- sqlite3DeleteTable(db, pSelTab);
- assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) );
- }else{
- pTable->nCol = 0;
- nErr++;
+ pSelTab = sqlite3ResultSetOfSelect(pParse, pSel);
+#endif
+ pParse->nTab = n;
+ if( pTable->pCheck ){
+ /* CREATE VIEW name(arglist) AS ...
+ ** The names of the columns in the table are taken from
+ ** arglist which is stored in pTable->pCheck. The pCheck field
+ ** normally holds CHECK constraints on an ordinary table, but for
+ ** a VIEW it holds the list of column names.
+ */
+ sqlite3ColumnsFromExprList(pParse, pTable->pCheck,
+ &pTable->nCol, &pTable->aCol);
+ if( db->mallocFailed==0
+ && pParse->nErr==0
+ && pTable->nCol==pSel->pEList->nExpr
+ ){
+ sqlite3SelectAddColumnTypeAndCollation(pParse, pTable, pSel);
}
- sqlite3SelectDelete(db, pSel);
- } else {
+ }else if( pSelTab ){
+ /* CREATE VIEW name AS... without an argument list. Construct
+ ** the column names from the SELECT statement that defines the view.
+ */
+ assert( pTable->aCol==0 );
+ pTable->nCol = pSelTab->nCol;
+ pTable->aCol = pSelTab->aCol;
+ pSelTab->nCol = 0;
+ pSelTab->aCol = 0;
+ assert( sqlite3SchemaMutexHeld(db, 0, pTable->pSchema) );
+ }else{
+ pTable->nCol = 0;
nErr++;
}
+ sqlite3DeleteTable(db, pSelTab);
+ sqlite3SelectDelete(db, pSel);
+ db->lookaside.bDisable--;
+ } else {
+ nErr++;
}
- db->lookaside.bEnabled = bEnabledLA;
pTable->pSchema->schemaFlags |= DB_UnresetViews;
#endif /* SQLITE_OMIT_VIEW */
return nErr;
static void destroyRootPage(Parse *pParse, int iTable, int iDb){
Vdbe *v = sqlite3GetVdbe(pParse);
int r1 = sqlite3GetTempReg(pParse);
+ assert( iTable>1 );
sqlite3VdbeAddOp3(v, OP_Destroy, iTable, r1, iDb);
sqlite3MayAbort(pParse);
#ifndef SQLITE_OMIT_AUTOVACUUM
*/
sqlite3NestedParse(pParse,
"UPDATE %Q.%s SET rootpage=%d WHERE #%d AND rootpage=#%d",
- pParse->db->aDb[iDb].zName, SCHEMA_TABLE(iDb), iTable, r1, r1);
+ pParse->db->aDb[iDb].zDbSName, MASTER_NAME, iTable, r1, r1);
#endif
sqlite3ReleaseTempReg(pParse, r1);
}
** is also added (this can happen with an auto-vacuum database).
*/
static void destroyTable(Parse *pParse, Table *pTab){
-#ifdef SQLITE_OMIT_AUTOVACUUM
- Index *pIdx;
- int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
- destroyRootPage(pParse, pTab->tnum, iDb);
- for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
- destroyRootPage(pParse, pIdx->tnum, iDb);
- }
-#else
/* If the database may be auto-vacuum capable (if SQLITE_OMIT_AUTOVACUUM
** is not defined), then it is important to call OP_Destroy on the
** table and index root-pages in order, starting with the numerically
iDestroyed = iLargest;
}
}
-#endif
}
/*
const char *zName /* Name of index or table */
){
int i;
- const char *zDbName = pParse->db->aDb[iDb].zName;
+ const char *zDbName = pParse->db->aDb[iDb].zDbSName;
for(i=1; i<=4; i++){
char zTab[24];
sqlite3_snprintf(sizeof(zTab),zTab,"sqlite_stat%d",i);
if( pTab->tabFlags & TF_Autoincrement ){
sqlite3NestedParse(pParse,
"DELETE FROM %Q.sqlite_sequence WHERE name=%Q",
- pDb->zName, pTab->zName
+ pDb->zDbSName, pTab->zName
);
}
#endif
*/
sqlite3NestedParse(pParse,
"DELETE FROM %Q.%s WHERE tbl_name=%Q and type!='trigger'",
- pDb->zName, SCHEMA_TABLE(iDb), pTab->zName);
+ pDb->zDbSName, MASTER_NAME, pTab->zName);
if( !isView && !IsVirtual(pTab) ){
destroyTable(pParse, pTab);
}
assert( pName->nSrc==1 );
if( sqlite3ReadSchema(pParse) ) goto exit_drop_table;
if( noErr ) db->suppressErr++;
+ assert( isView==0 || isView==LOCATE_VIEW );
pTab = sqlite3LocateTableItem(pParse, isView, &pName->a[0]);
if( noErr ) db->suppressErr--;
{
int code;
const char *zTab = SCHEMA_TABLE(iDb);
- const char *zDb = db->aDb[iDb].zName;
+ const char *zDb = db->aDb[iDb].zDbSName;
const char *zArg2 = 0;
if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb)){
goto exit_drop_table;
pFKey->zTo, (void *)pFKey
);
if( pNextTo==pFKey ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
goto fk_end;
}
if( pNextTo ){
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse, SQLITE_REINDEX, pIndex->zName, 0,
- db->aDb[iDb].zName ) ){
+ db->aDb[iDb].zDbSName ) ){
return;
}
#endif
tnum = pIndex->tnum;
}
pKey = sqlite3KeyInfoOfIndex(pParse, pIndex);
+ assert( pKey!=0 || db->mallocFailed || pParse->nErr );
/* Open the sorter cursor if we are to use one. */
iSorter = pParse->nTab++;
sqlite3VdbeChangeP5(v, OPFLAG_BULKCSR|((memRootPage>=0)?OPFLAG_P2ISREG:0));
addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v);
- assert( pKey!=0 || db->mallocFailed || pParse->nErr );
- if( IsUniqueIndex(pIndex) && pKey!=0 ){
+ if( IsUniqueIndex(pIndex) ){
int j2 = sqlite3VdbeCurrentAddr(v) + 3;
sqlite3VdbeGoto(v, j2);
addr2 = sqlite3VdbeCurrentAddr(v);
addr2 = sqlite3VdbeCurrentAddr(v);
}
sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx);
- sqlite3VdbeAddOp3(v, OP_Last, iIdx, 0, -1);
- sqlite3VdbeAddOp3(v, OP_IdxInsert, iIdx, regRecord, 0);
+ sqlite3VdbeAddOp1(v, OP_SeekEnd, iIdx);
+ sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdx, regRecord);
sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
sqlite3ReleaseTempReg(pParse, regRecord);
sqlite3VdbeAddOp2(v, OP_SorterNext, iSorter, addr2); VdbeCoverage(v);
p = sqlite3DbMallocZero(db, nByte + nExtra);
if( p ){
char *pExtra = ((char*)p)+ROUND8(sizeof(Index));
- p->azColl = (char**)pExtra; pExtra += ROUND8(sizeof(char*)*nCol);
+ p->azColl = (const char**)pExtra; pExtra += ROUND8(sizeof(char*)*nCol);
p->aiRowLogEst = (LogEst*)pExtra; pExtra += sizeof(LogEst)*(nCol+1);
p->aiColumn = (i16*)pExtra; pExtra += sizeof(i16)*nCol;
p->aSortOrder = (u8*)pExtra;
return p;
}
-/*
-** Backwards Compatibility Hack:
-**
-** Historical versions of SQLite accepted strings as column names in
-** indexes and PRIMARY KEY constraints and in UNIQUE constraints. Example:
-**
-** CREATE TABLE xyz(a,b,c,d,e,PRIMARY KEY('a'),UNIQUE('b','c' COLLATE trim)
-** CREATE INDEX abc ON xyz('c','d' DESC,'e' COLLATE nocase DESC);
-**
-** This is goofy. But to preserve backwards compatibility we continue to
-** accept it. This routine does the necessary conversion. It converts
-** the expression given in its argument from a TK_STRING into a TK_ID
-** if the expression is just a TK_STRING with an optional COLLATE clause.
-** If the epxression is anything other than TK_STRING, the expression is
-** unchanged.
-*/
-static void sqlite3StringToId(Expr *p){
- if( p->op==TK_STRING ){
- p->op = TK_ID;
- }else if( p->op==TK_COLLATE && p->pLeft->op==TK_STRING ){
- p->pLeft->op = TK_ID;
- }
-}
-
/*
** Create a new index for an SQL table. pName1.pName2 is the name of the index
** and pTblList is the name of the table that is to be indexed. Both will
** pList is a list of columns to be indexed. pList will be NULL if this
** is a primary key or unique-constraint on the most recent column added
** to the table currently under construction.
-**
-** If the index is created successfully, return a pointer to the new Index
-** structure. This is used by sqlite3AddPrimaryKey() to mark the index
-** as the tables primary key (Index.idxType==SQLITE_IDXTYPE_PRIMARYKEY)
*/
-SQLITE_PRIVATE Index *sqlite3CreateIndex(
+SQLITE_PRIVATE void sqlite3CreateIndex(
Parse *pParse, /* All information about this parse */
Token *pName1, /* First part of index name. May be NULL */
Token *pName2, /* Second part of index name. May be NULL */
Token *pStart, /* The CREATE token that begins this statement */
Expr *pPIWhere, /* WHERE clause for partial indices */
int sortOrder, /* Sort order of primary key when pList==NULL */
- int ifNotExist /* Omit error if index already exists */
+ int ifNotExist, /* Omit error if index already exists */
+ u8 idxType /* The index type */
){
- Index *pRet = 0; /* Pointer to return */
Table *pTab = 0; /* Table to be indexed */
Index *pIndex = 0; /* The index to be created */
char *zName = 0; /* Name of the index */
char *zExtra = 0; /* Extra space after the Index object */
Index *pPk = 0; /* PRIMARY KEY index for WITHOUT ROWID tables */
- if( db->mallocFailed || IN_DECLARE_VTAB || pParse->nErr>0 ){
+ if( db->mallocFailed || pParse->nErr>0 ){
+ goto exit_create_index;
+ }
+ if( IN_DECLARE_VTAB && idxType!=SQLITE_IDXTYPE_PRIMARYKEY ){
goto exit_create_index;
}
if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){
goto exit_create_index;
}
}
- if( sqlite3FindIndex(db, zName, pDb->zName)!=0 ){
+ if( sqlite3FindIndex(db, zName, pDb->zDbSName)!=0 ){
if( !ifNotExist ){
sqlite3ErrorMsg(pParse, "index %s already exists", zName);
}else{
if( zName==0 ){
goto exit_create_index;
}
+
+ /* Automatic index names generated from within sqlite3_declare_vtab()
+ ** must have names that are distinct from normal automatic index names.
+ ** The following statement converts "sqlite3_autoindex..." into
+ ** "sqlite3_butoindex..." in order to make the names distinct.
+ ** The "vtab_err.test" test demonstrates the need of this statement. */
+ if( IN_DECLARE_VTAB ) zName[7]++;
}
/* Check for authorization to create an index.
*/
#ifndef SQLITE_OMIT_AUTHORIZATION
{
- const char *zDb = pDb->zName;
+ const char *zDb = pDb->zDbSName;
if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iDb), 0, zDb) ){
goto exit_create_index;
}
*/
if( pList==0 ){
Token prevCol;
- prevCol.z = pTab->aCol[pTab->nCol-1].zName;
- prevCol.n = sqlite3Strlen30(prevCol.z);
+ Column *pCol = &pTab->aCol[pTab->nCol-1];
+ pCol->colFlags |= COLFLAG_UNIQUE;
+ sqlite3TokenInit(&prevCol, pCol->zName);
pList = sqlite3ExprListAppend(pParse, 0,
sqlite3ExprAlloc(db, TK_ID, &prevCol, 0));
if( pList==0 ) goto exit_create_index;
pIndex->pTable = pTab;
pIndex->onError = (u8)onError;
pIndex->uniqNotNull = onError!=OE_None;
- pIndex->idxType = pName ? SQLITE_IDXTYPE_APPDEF : SQLITE_IDXTYPE_UNIQUE;
+ pIndex->idxType = idxType;
pIndex->pSchema = db->aDb[iDb].pSchema;
pIndex->nKeyCol = pList->nExpr;
if( pPIWhere ){
for(i=0, pListItem=pList->a; i<pList->nExpr; i++, pListItem++){
Expr *pCExpr; /* The i-th index expression */
int requestedSortOrder; /* ASC or DESC on the i-th expression */
- char *zColl; /* Collation sequence name */
+ const char *zColl; /* Collation sequence name */
sqlite3StringToId(pListItem->pExpr);
sqlite3ResolveSelfReference(pParse, pTab, NC_IdxExpr, pListItem->pExpr, 0);
}else if( j>=0 ){
zColl = pTab->aCol[j].zColl;
}
- if( !zColl ) zColl = "BINARY";
+ if( !zColl ) zColl = sqlite3StrBINARY;
if( !db->init.busy && !sqlite3LocateCollSeq(pParse, zColl) ){
goto exit_create_index;
}
assert( i==pIndex->nColumn );
}else{
pIndex->aiColumn[i] = XN_ROWID;
- pIndex->azColl[i] = "BINARY";
+ pIndex->azColl[i] = sqlite3StrBINARY;
}
sqlite3DefaultRowEst(pIndex);
if( pParse->pNewTable==0 ) estimateIndexWidth(pIndex);
+ /* If this index contains every column of its table, then mark
+ ** it as a covering index */
+ assert( HasRowid(pTab)
+ || pTab->iPKey<0 || sqlite3ColumnOfIndex(pIndex, pTab->iPKey)>=0 );
+ if( pTblName!=0 && pIndex->nColumn>=pTab->nCol ){
+ pIndex->isCovering = 1;
+ for(j=0; j<pTab->nCol; j++){
+ if( j==pTab->iPKey ) continue;
+ if( sqlite3ColumnOfIndex(pIndex,j)>=0 ) continue;
+ pIndex->isCovering = 0;
+ break;
+ }
+ }
+
if( pTab==pParse->pNewTable ){
/* This routine has been called to create an automatic index as a
** result of a PRIMARY KEY or UNIQUE clause on a column definition, or
if( pIdx->aiColumn[k]!=pIndex->aiColumn[k] ) break;
z1 = pIdx->azColl[k];
z2 = pIndex->azColl[k];
- if( z1!=z2 && sqlite3StrICmp(z1, z2) ) break;
+ if( sqlite3StrICmp(z1, z2) ) break;
}
if( k==pIdx->nKeyCol ){
if( pIdx->onError!=pIndex->onError ){
pIdx->onError = pIndex->onError;
}
}
- pRet = pIdx;
+ if( idxType==SQLITE_IDXTYPE_PRIMARYKEY ) pIdx->idxType = idxType;
goto exit_create_index;
}
}
assert( pParse->nErr==0 );
if( db->init.busy ){
Index *p;
+ assert( !IN_DECLARE_VTAB );
assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) );
p = sqlite3HashInsert(&pIndex->pSchema->idxHash,
pIndex->zName, pIndex);
if( p ){
assert( p==pIndex ); /* Malloc must have failed */
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
goto exit_create_index;
}
- db->flags |= SQLITE_InternChanges;
+ db->mDbFlags |= DBFLAG_SchemaChange;
if( pTblName!=0 ){
pIndex->tnum = db->init.newTnum;
}
** that case the convertToWithoutRowidTable() routine will replace
** the Noop with a Goto to jump over the VDBE code generated below. */
pIndex->tnum = sqlite3VdbeAddOp0(v, OP_Noop);
- sqlite3VdbeAddOp2(v, OP_CreateIndex, iDb, iMem);
+ sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, iMem, BTREE_BLOBKEY);
/* Gather the complete text of the CREATE INDEX statement into
** the zStmt variable
*/
sqlite3NestedParse(pParse,
"INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);",
- db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+ db->aDb[iDb].zDbSName, MASTER_NAME,
pIndex->zName,
pTab->zName,
iMem,
sqlite3ChangeCookie(pParse, iDb);
sqlite3VdbeAddParseSchemaOp(v, iDb,
sqlite3MPrintf(db, "name='%q' AND type='index'", pIndex->zName));
- sqlite3VdbeAddOp1(v, OP_Expire, 0);
+ sqlite3VdbeAddOp0(v, OP_Expire);
}
sqlite3VdbeJumpHere(v, pIndex->tnum);
pIndex->pNext = pOther->pNext;
pOther->pNext = pIndex;
}
- pRet = pIndex;
pIndex = 0;
}
sqlite3ExprListDelete(db, pList);
sqlite3SrcListDelete(db, pTblName);
sqlite3DbFree(db, zName);
- return pRet;
}
/*
int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol);
int i;
+ /* Indexes with default row estimates should not have stat1 data */
+ assert( !pIdx->hasStat1 );
+
/* Set the first entry (number of rows in the index) to the estimated
- ** number of rows in the table. Or 10, if the estimated number of rows
- ** in the table is less than that. */
+ ** number of rows in the table, or half the number of rows in the table
+ ** for a partial index. But do not let the estimate drop below 10. */
a[0] = pIdx->pTable->nRowLogEst;
- if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) );
+ if( pIdx->pPartIdxWhere!=0 ) a[0] -= 10; assert( 10==sqlite3LogEst(2) );
+ if( a[0]<33 ) a[0] = 33; assert( 33==sqlite3LogEst(10) );
/* Estimate that a[1] is 10, a[2] is 9, a[3] is 8, a[4] is 7, a[5] is
** 6 and each subsequent value (if any) is 5. */
{
int code = SQLITE_DROP_INDEX;
Table *pTab = pIndex->pTable;
- const char *zDb = db->aDb[iDb].zName;
+ const char *zDb = db->aDb[iDb].zDbSName;
const char *zTab = SCHEMA_TABLE(iDb);
if( sqlite3AuthCheck(pParse, SQLITE_DELETE, zTab, 0, zDb) ){
goto exit_drop_index;
sqlite3BeginWriteOperation(pParse, 1, iDb);
sqlite3NestedParse(pParse,
"DELETE FROM %Q.%s WHERE name=%Q AND type='index'",
- db->aDb[iDb].zName, SCHEMA_TABLE(iDb), pIndex->zName
+ db->aDb[iDb].zDbSName, MASTER_NAME, pIndex->zName
);
sqlite3ClearStatTables(pParse, iDb, "idx", pIndex->zName);
sqlite3ChangeCookie(pParse, iDb);
sqlite3DbFree(db, pList->a[i].zName);
}
sqlite3DbFree(db, pList->a);
- sqlite3DbFree(db, pList);
+ sqlite3DbFreeNN(db, pList);
}
/*
/* Allocate additional space if needed */
if( (u32)pSrc->nSrc+nExtra>pSrc->nAlloc ){
SrcList *pNew;
- int nAlloc = pSrc->nSrc+nExtra;
+ int nAlloc = pSrc->nSrc*2+nExtra;
int nGot;
pNew = sqlite3DbRealloc(db, pSrc,
sizeof(*pSrc) + (nAlloc-1)*sizeof(pSrc->a[0]) );
){
struct SrcList_item *pItem;
assert( pDatabase==0 || pTable!=0 ); /* Cannot have C without B */
+ assert( db!=0 );
if( pList==0 ){
- pList = sqlite3DbMallocZero(db, sizeof(SrcList) );
+ pList = sqlite3DbMallocRawNN(db, sizeof(SrcList) );
if( pList==0 ) return 0;
pList->nAlloc = 1;
+ pList->nSrc = 1;
+ memset(&pList->a[0], 0, sizeof(pList->a[0]));
+ pList->a[0].iCursor = -1;
+ }else{
+ pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc);
}
- pList = sqlite3SrcListEnlarge(db, pList, 1, pList->nSrc);
if( db->mallocFailed ){
sqlite3SrcListDelete(db, pList);
return 0;
pDatabase = 0;
}
if( pDatabase ){
- Token *pTemp = pDatabase;
- pDatabase = pTable;
- pTable = pTemp;
+ pItem->zName = sqlite3NameFromToken(db, pDatabase);
+ pItem->zDatabase = sqlite3NameFromToken(db, pTable);
+ }else{
+ pItem->zName = sqlite3NameFromToken(db, pTable);
+ pItem->zDatabase = 0;
}
- pItem->zName = sqlite3NameFromToken(db, pTable);
- pItem->zDatabase = sqlite3NameFromToken(db, pDatabase);
return pList;
}
sqlite3ExprDelete(db, pItem->pOn);
sqlite3IdListDelete(db, pItem->pUsing);
}
- sqlite3DbFree(db, pList);
+ sqlite3DbFreeNN(db, pList);
}
/*
goto append_from_error;
}
p = sqlite3SrcListAppend(db, p, pTable, pDatabase);
- if( p==0 || NEVER(p->nSrc==0) ){
+ if( p==0 ){
goto append_from_error;
}
+ assert( p->nSrc>0 );
pItem = &p->a[p->nSrc-1];
assert( pAlias!=0 );
if( pAlias->n ){
*/
SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pIndexedBy){
assert( pIndexedBy!=0 );
- if( p && ALWAYS(p->nSrc>0) ){
- struct SrcList_item *pItem = &p->a[p->nSrc-1];
+ if( p && pIndexedBy->n>0 ){
+ struct SrcList_item *pItem;
+ assert( p->nSrc>0 );
+ pItem = &p->a[p->nSrc-1];
assert( pItem->fg.notIndexed==0 );
assert( pItem->fg.isIndexedBy==0 );
assert( pItem->fg.isTabFunc==0 );
pItem->fg.notIndexed = 1;
}else{
pItem->u1.zIndexedBy = sqlite3NameFromToken(pParse->db, pIndexedBy);
- pItem->fg.isIndexedBy = (pItem->u1.zIndexedBy!=0);
+ pItem->fg.isIndexedBy = 1;
}
}
}
** table-valued-function.
*/
SQLITE_PRIVATE void sqlite3SrcListFuncArgs(Parse *pParse, SrcList *p, ExprList *pList){
- if( p && pList ){
+ if( p ){
struct SrcList_item *pItem = &p->a[p->nSrc-1];
assert( pItem->fg.notIndexed==0 );
assert( pItem->fg.isIndexedBy==0 );
}
/*
-** Begin a transaction
+** Generate VDBE code for a BEGIN statement.
*/
SQLITE_PRIVATE void sqlite3BeginTransaction(Parse *pParse, int type){
sqlite3 *db;
assert( pParse!=0 );
db = pParse->db;
assert( db!=0 );
-/* if( db->aDb[0].pBt==0 ) return; */
if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "BEGIN", 0, 0) ){
return;
}
sqlite3VdbeUsesBtree(v, i);
}
}
- sqlite3VdbeAddOp2(v, OP_AutoCommit, 0, 0);
+ sqlite3VdbeAddOp0(v, OP_AutoCommit);
}
/*
-** Commit a transaction
+** Generate VDBE code for a COMMIT or ROLLBACK statement.
+** Code for ROLLBACK is generated if eType==TK_ROLLBACK. Otherwise
+** code is generated for a COMMIT.
*/
-SQLITE_PRIVATE void sqlite3CommitTransaction(Parse *pParse){
+SQLITE_PRIVATE void sqlite3EndTransaction(Parse *pParse, int eType){
Vdbe *v;
+ int isRollback;
assert( pParse!=0 );
assert( pParse->db!=0 );
- if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "COMMIT", 0, 0) ){
+ assert( eType==TK_COMMIT || eType==TK_END || eType==TK_ROLLBACK );
+ isRollback = eType==TK_ROLLBACK;
+ if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION,
+ isRollback ? "ROLLBACK" : "COMMIT", 0, 0) ){
return;
}
v = sqlite3GetVdbe(pParse);
if( v ){
- sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 0);
- }
-}
-
-/*
-** Rollback a transaction
-*/
-SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse *pParse){
- Vdbe *v;
-
- assert( pParse!=0 );
- assert( pParse->db!=0 );
- if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "ROLLBACK", 0, 0) ){
- return;
- }
- v = sqlite3GetVdbe(pParse);
- if( v ){
- sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 1);
+ sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, isRollback);
}
}
db->aDb[1].pBt = pBt;
assert( db->aDb[1].pSchema );
if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1, 0) ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return 1;
}
}
*/
SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse *pParse, int iDb){
Parse *pToplevel = sqlite3ParseToplevel(pParse);
- sqlite3 *db = pToplevel->db;
- assert( iDb>=0 && iDb<db->nDb );
- assert( db->aDb[iDb].pBt!=0 || iDb==1 );
+ assert( iDb>=0 && iDb<pParse->db->nDb );
+ assert( pParse->db->aDb[iDb].pBt!=0 || iDb==1 );
assert( iDb<SQLITE_MAX_ATTACHED+2 );
- assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+ assert( sqlite3SchemaMutexHeld(pParse->db, iDb, 0) );
if( DbMaskTest(pToplevel->cookieMask, iDb)==0 ){
DbMaskSet(pToplevel->cookieMask, iDb);
- pToplevel->cookieValue[iDb] = db->aDb[iDb].pSchema->schema_cookie;
if( !OMIT_TEMPDB && iDb==1 ){
sqlite3OpenTempDatabase(pToplevel);
}
int i;
for(i=0; i<db->nDb; i++){
Db *pDb = &db->aDb[i];
- if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zName)) ){
+ if( pDb->pBt && (!zDb || 0==sqlite3StrICmp(zDb, pDb->zDbSName)) ){
sqlite3CodeVerifySchema(pParse, i);
}
}
sqlite3MayAbort(pParse);
}
sqlite3VdbeAddOp4(v, OP_Halt, errCode, onError, 0, p4, p4type);
- if( p5Errmsg ) sqlite3VdbeChangeP5(v, p5Errmsg);
+ sqlite3VdbeChangeP5(v, p5Errmsg);
}
/*
sqlite3StrAccumInit(&errMsg, pParse->db, 0, 0, 200);
if( pIdx->aColExpr ){
- sqlite3XPrintf(&errMsg, 0, "index '%q'", pIdx->zName);
+ sqlite3XPrintf(&errMsg, "index '%q'", pIdx->zName);
}else{
for(j=0; j<pIdx->nKeyCol; j++){
char *zCol;
assert( pIdx->aiColumn[j]>=0 );
zCol = pTab->aCol[pIdx->aiColumn[j]].zName;
if( j ) sqlite3StrAccumAppend(&errMsg, ", ", 2);
- sqlite3XPrintf(&errMsg, 0, "%s.%s", pTab->zName, zCol);
+ sqlite3StrAccumAppendAll(&errMsg, pTab->zName);
+ sqlite3StrAccumAppend(&errMsg, ".", 1);
+ sqlite3StrAccumAppendAll(&errMsg, zCol);
}
}
zErr = sqlite3StrAccumFinish(&errMsg);
if( iDb<0 ) return;
z = sqlite3NameFromToken(db, pObjName);
if( z==0 ) return;
- zDb = db->aDb[iDb].zName;
+ zDb = db->aDb[iDb].zDbSName;
pTab = sqlite3FindTable(db, z, zDb);
if( pTab ){
reindexTable(pParse, pTab, 0);
/*
** Return a KeyInfo structure that is appropriate for the given Index.
**
-** The KeyInfo structure for an index is cached in the Index object.
-** So there might be multiple references to the returned pointer. The
-** caller should not try to modify the KeyInfo object.
-**
** The caller should invoke sqlite3KeyInfoUnref() on the returned object
** when it has finished using it.
*/
if( pKey ){
assert( sqlite3KeyInfoIsWriteable(pKey) );
for(i=0; i<nCol; i++){
- char *zColl = pIdx->azColl[i];
- assert( zColl!=0 );
- pKey->aColl[i] = strcmp(zColl,"BINARY")==0 ? 0 :
+ const char *zColl = pIdx->azColl[i];
+ pKey->aColl[i] = zColl==sqlite3StrBINARY ? 0 :
sqlite3LocateCollSeq(pParse, zColl);
pKey->aSortOrder[i] = pIdx->aSortOrder[i];
}
if( pParse->nErr ){
+ assert( pParse->rc==SQLITE_ERROR_MISSING_COLLSEQ );
+ if( pIdx->bNoQuery==0 ){
+ /* Deactivate the index because it contains an unknown collating
+ ** sequence. The only way to reactive the index is to reload the
+ ** schema. Adding the missing collating sequence later does not
+ ** reactive the index. The application had the chance to register
+ ** the missing index using the collation-needed callback. For
+ ** simplicity, SQLite will not give the application a second chance.
+ */
+ pIdx->bNoQuery = 1;
+ pParse->rc = SQLITE_ERROR_RETRY;
+ }
sqlite3KeyInfoUnref(pKey);
pKey = 0;
}
}else{
pNew = sqlite3DbMallocZero(db, sizeof(*pWith));
}
- assert( zName!=0 || pNew==0 );
- assert( db->mallocFailed==0 || pNew==0 );
+ assert( (pNew!=0 && zName!=0) || db->mallocFailed );
- if( pNew==0 ){
+ if( db->mallocFailed ){
sqlite3ExprListDelete(db, pArglist);
sqlite3SelectDelete(db, pQuery);
sqlite3DbFree(db, zName);
assert( !p || p->xCmp );
if( p==0 ){
sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName);
+ pParse->rc = SQLITE_ERROR_MISSING_COLLSEQ;
}
return p;
}
** from the main database is substituted, if one is available.
*/
SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *pParse, CollSeq *pColl){
- if( pColl ){
+ if( pColl && pColl->xCmp==0 ){
const char *zName = pColl->zName;
sqlite3 *db = pParse->db;
CollSeq *p = sqlite3GetCollSeq(pParse, ENC(db), pColl, zName);
pColl = sqlite3HashFind(&db->aCollSeq, zName);
if( 0==pColl && create ){
- int nName = sqlite3Strlen30(zName);
- pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1);
+ int nName = sqlite3Strlen30(zName) + 1;
+ pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName);
if( pColl ){
CollSeq *pDel = 0;
pColl[0].zName = (char*)&pColl[3];
pColl[2].zName = (char*)&pColl[3];
pColl[2].enc = SQLITE_UTF16BE;
memcpy(pColl[0].zName, zName, nName);
- pColl[0].zName[nName] = 0;
pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, pColl);
/* If a malloc() failure occurred in sqlite3HashInsert(), it will
*/
assert( pDel==0 || pDel==pColl );
if( pDel!=0 ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
sqlite3DbFree(db, pDel);
pColl = 0;
}
** 5: UTF16 byte order conversion required - argument count matches exactly
** 6: Perfect match: encoding and argument count match exactly.
**
-** If nArg==(-2) then any function with a non-null xStep or xFunc is
-** a perfect match and any function with both xStep and xFunc NULL is
+** If nArg==(-2) then any function with a non-null xSFunc is
+** a perfect match and any function with xSFunc NULL is
** a non-match.
*/
#define FUNC_PERFECT_MATCH 6 /* The score for a perfect match */
int match;
/* nArg of -2 is a special case */
- if( nArg==(-2) ) return (p->xFunc==0 && p->xStep==0) ? 0 : FUNC_PERFECT_MATCH;
+ if( nArg==(-2) ) return (p->xSFunc==0) ? 0 : FUNC_PERFECT_MATCH;
/* Wrong number of arguments means "no match" */
if( p->nArg!=nArg && p->nArg>=0 ) return 0;
** a pointer to the matching FuncDef if found, or 0 if there is no match.
*/
static FuncDef *functionSearch(
- FuncDefHash *pHash, /* Hash table to search */
int h, /* Hash of the name */
- const char *zFunc, /* Name of function */
- int nFunc /* Number of bytes in zFunc */
+ const char *zFunc /* Name of function */
){
FuncDef *p;
- for(p=pHash->a[h]; p; p=p->pHash){
- if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 && p->zName[nFunc]==0 ){
+ for(p=sqlite3BuiltinFunctions.a[h]; p; p=p->u.pHash){
+ if( sqlite3StrICmp(p->zName, zFunc)==0 ){
return p;
}
}
/*
** Insert a new FuncDef into a FuncDefHash hash table.
*/
-SQLITE_PRIVATE void sqlite3FuncDefInsert(
- FuncDefHash *pHash, /* The hash table into which to insert */
- FuncDef *pDef /* The function definition to insert */
+SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(
+ FuncDef *aDef, /* List of global functions to be inserted */
+ int nDef /* Length of the apDef[] list */
){
- FuncDef *pOther;
- int nName = sqlite3Strlen30(pDef->zName);
- u8 c1 = (u8)pDef->zName[0];
- int h = (sqlite3UpperToLower[c1] + nName) % ArraySize(pHash->a);
- pOther = functionSearch(pHash, h, pDef->zName, nName);
- if( pOther ){
- assert( pOther!=pDef && pOther->pNext!=pDef );
- pDef->pNext = pOther->pNext;
- pOther->pNext = pDef;
- }else{
- pDef->pNext = 0;
- pDef->pHash = pHash->a[h];
- pHash->a[h] = pDef;
+ int i;
+ for(i=0; i<nDef; i++){
+ FuncDef *pOther;
+ const char *zName = aDef[i].zName;
+ int nName = sqlite3Strlen30(zName);
+ int h = (zName[0] + nName) % SQLITE_FUNC_HASH_SZ;
+ assert( zName[0]>='a' && zName[0]<='z' );
+ pOther = functionSearch(h, zName);
+ if( pOther ){
+ assert( pOther!=&aDef[i] && pOther->pNext!=&aDef[i] );
+ aDef[i].pNext = pOther->pNext;
+ pOther->pNext = &aDef[i];
+ }else{
+ aDef[i].pNext = 0;
+ aDef[i].u.pHash = sqlite3BuiltinFunctions.a[h];
+ sqlite3BuiltinFunctions.a[h] = &aDef[i];
+ }
}
}
** no matching function previously existed.
**
** If nArg is -2, then the first valid function found is returned. A
-** function is valid if either xFunc or xStep is non-zero. The nArg==(-2)
+** function is valid if xSFunc is non-zero. The nArg==(-2)
** case is used to see if zName is a valid function name for some number
** of arguments. If nArg is -2, then createFlag must be 0.
**
*/
SQLITE_PRIVATE FuncDef *sqlite3FindFunction(
sqlite3 *db, /* An open database */
- const char *zName, /* Name of the function. Not null-terminated */
- int nName, /* Number of characters in the name */
+ const char *zName, /* Name of the function. zero-terminated */
int nArg, /* Number of arguments. -1 means any number */
u8 enc, /* Preferred text encoding */
u8 createFlag /* Create new entry if true and does not otherwise exist */
FuncDef *pBest = 0; /* Best match found so far */
int bestScore = 0; /* Score of best match */
int h; /* Hash value */
+ int nName; /* Length of the name */
assert( nArg>=(-2) );
assert( nArg>=(-1) || createFlag==0 );
- h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % ArraySize(db->aFunc.a);
+ nName = sqlite3Strlen30(zName);
/* First search for a match amongst the application-defined functions.
*/
- p = functionSearch(&db->aFunc, h, zName, nName);
+ p = (FuncDef*)sqlite3HashFind(&db->aFunc, zName);
while( p ){
int score = matchQuality(p, nArg, enc);
if( score>bestScore ){
/* If no match is found, search the built-in functions.
**
- ** If the SQLITE_PreferBuiltin flag is set, then search the built-in
+ ** If the DBFLAG_PreferBuiltin flag is set, then search the built-in
** functions even if a prior app-defined function was found. And give
** priority to built-in functions.
**
** new function. But the FuncDefs for built-in functions are read-only.
** So we must not search for built-ins when creating a new function.
*/
- if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
+ if( !createFlag && (pBest==0 || (db->mDbFlags & DBFLAG_PreferBuiltin)!=0) ){
bestScore = 0;
- p = functionSearch(pHash, h, zName, nName);
+ h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % SQLITE_FUNC_HASH_SZ;
+ p = functionSearch(h, zName);
while( p ){
int score = matchQuality(p, nArg, enc);
if( score>bestScore ){
*/
if( createFlag && bestScore<FUNC_PERFECT_MATCH &&
(pBest = sqlite3DbMallocZero(db, sizeof(*pBest)+nName+1))!=0 ){
- pBest->zName = (char *)&pBest[1];
+ FuncDef *pOther;
+ pBest->zName = (const char*)&pBest[1];
pBest->nArg = (u16)nArg;
pBest->funcFlags = enc;
- memcpy(pBest->zName, zName, nName);
- pBest->zName[nName] = 0;
- sqlite3FuncDefInsert(&db->aFunc, pBest);
+ memcpy((char*)&pBest[1], zName, nName+1);
+ pOther = (FuncDef*)sqlite3HashInsert(&db->aFunc, pBest->zName, pBest);
+ if( pOther==pBest ){
+ sqlite3DbFree(db, pBest);
+ sqlite3OomFault(db);
+ return 0;
+ }else{
+ pBest->pNext = pOther;
+ }
}
- if( pBest && (pBest->xStep || pBest->xFunc || createFlag) ){
+ if( pBest && (pBest->xSFunc || createFlag) ){
return pBest;
}
return 0;
pSchema->pSeqTab = 0;
if( pSchema->schemaFlags & DB_SchemaLoaded ){
pSchema->iGeneration++;
- pSchema->schemaFlags &= ~DB_SchemaLoaded;
}
+ pSchema->schemaFlags &= ~(DB_SchemaLoaded|DB_ResetWanted);
}
/*
p = (Schema *)sqlite3DbMallocZero(0, sizeof(Schema));
}
if( !p ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}else if ( 0==p->file_format ){
sqlite3HashInit(&p->tblHash);
sqlite3HashInit(&p->idxHash);
sqlite3DeleteTable(pParse->db, pItem->pTab);
pItem->pTab = pTab;
if( pTab ){
- pTab->nRef++;
+ pTab->nTabRef++;
}
if( sqlite3IndexedByLookup(pParse, pItem) ){
pTab = 0;
Parse *pParse, /* Parsing context */
Table *pView, /* View definition */
Expr *pWhere, /* Optional WHERE clause to be added */
+ ExprList *pOrderBy, /* Optional ORDER BY clause */
+ Expr *pLimit, /* Optional LIMIT clause */
int iCur /* Cursor number for ephemeral table */
){
SelectDest dest;
if( pFrom ){
assert( pFrom->nSrc==1 );
pFrom->a[0].zName = sqlite3DbStrDup(db, pView->zName);
- pFrom->a[0].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName);
+ pFrom->a[0].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zDbSName);
assert( pFrom->a[0].pOn==0 );
assert( pFrom->a[0].pUsing==0 );
}
- pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0);
+ pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, pOrderBy,
+ SF_IncludeHidden, pLimit);
sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur);
sqlite3Select(pParse, pSel, &dest);
sqlite3SelectDelete(db, pSel);
Expr *pWhere, /* The WHERE clause. May be null */
ExprList *pOrderBy, /* The ORDER BY clause. May be null */
Expr *pLimit, /* The LIMIT clause. May be null */
- Expr *pOffset, /* The OFFSET clause. May be null */
char *zStmtType /* Either DELETE or UPDATE. For err msgs. */
){
- Expr *pWhereRowid = NULL; /* WHERE rowid .. */
+ sqlite3 *db = pParse->db;
+ Expr *pLhs = NULL; /* LHS of IN(SELECT...) operator */
Expr *pInClause = NULL; /* WHERE rowid IN ( select ) */
- Expr *pSelectRowid = NULL; /* SELECT rowid ... */
ExprList *pEList = NULL; /* Expression list contaning only pSelectRowid */
SrcList *pSelectSrc = NULL; /* SELECT rowid FROM x ... (dup of pSrc) */
Select *pSelect = NULL; /* Complete SELECT tree */
+ Table *pTab;
/* Check that there isn't an ORDER BY without a LIMIT clause.
*/
- if( pOrderBy && (pLimit == 0) ) {
+ if( pOrderBy && pLimit==0 ) {
sqlite3ErrorMsg(pParse, "ORDER BY without LIMIT on %s", zStmtType);
- goto limit_where_cleanup_2;
+ sqlite3ExprDelete(pParse->db, pWhere);
+ sqlite3ExprListDelete(pParse->db, pOrderBy);
+ return 0;
}
/* We only need to generate a select expression if there
** is a limit/offset term to enforce.
*/
if( pLimit == 0 ) {
- /* if pLimit is null, pOffset will always be null as well. */
- assert( pOffset == 0 );
return pWhere;
}
** );
*/
- pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0);
- if( pSelectRowid == 0 ) goto limit_where_cleanup_2;
- pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid);
- if( pEList == 0 ) goto limit_where_cleanup_2;
+ pTab = pSrc->a[0].pTab;
+ if( HasRowid(pTab) ){
+ pLhs = sqlite3PExpr(pParse, TK_ROW, 0, 0);
+ pEList = sqlite3ExprListAppend(
+ pParse, 0, sqlite3PExpr(pParse, TK_ROW, 0, 0)
+ );
+ }else{
+ Index *pPk = sqlite3PrimaryKeyIndex(pTab);
+ if( pPk->nKeyCol==1 ){
+ const char *zName = pTab->aCol[pPk->aiColumn[0]].zName;
+ pLhs = sqlite3Expr(db, TK_ID, zName);
+ pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, zName));
+ }else{
+ int i;
+ for(i=0; i<pPk->nKeyCol; i++){
+ Expr *p = sqlite3Expr(db, TK_ID, pTab->aCol[pPk->aiColumn[i]].zName);
+ pEList = sqlite3ExprListAppend(pParse, pEList, p);
+ }
+ pLhs = sqlite3PExpr(pParse, TK_VECTOR, 0, 0);
+ if( pLhs ){
+ pLhs->x.pList = sqlite3ExprListDup(db, pEList, 0);
+ }
+ }
+ }
/* duplicate the FROM clause as it is needed by both the DELETE/UPDATE tree
** and the SELECT subtree. */
+ pSrc->a[0].pTab = 0;
pSelectSrc = sqlite3SrcListDup(pParse->db, pSrc, 0);
- if( pSelectSrc == 0 ) {
- sqlite3ExprListDelete(pParse->db, pEList);
- goto limit_where_cleanup_2;
- }
+ pSrc->a[0].pTab = pTab;
+ pSrc->a[0].pIBIndex = 0;
/* generate the SELECT expression tree. */
- pSelect = sqlite3SelectNew(pParse,pEList,pSelectSrc,pWhere,0,0,
- pOrderBy,0,pLimit,pOffset);
- if( pSelect == 0 ) return 0;
+ pSelect = sqlite3SelectNew(pParse, pEList, pSelectSrc, pWhere, 0 ,0,
+ pOrderBy,0,pLimit
+ );
/* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */
- pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0, 0);
- if( pWhereRowid == 0 ) goto limit_where_cleanup_1;
- pInClause = sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0, 0);
- if( pInClause == 0 ) goto limit_where_cleanup_1;
-
- pInClause->x.pSelect = pSelect;
- pInClause->flags |= EP_xIsSelect;
- sqlite3ExprSetHeightAndFlags(pParse, pInClause);
+ pInClause = sqlite3PExpr(pParse, TK_IN, pLhs, 0);
+ sqlite3PExprAddSelect(pParse, pInClause, pSelect);
return pInClause;
-
- /* something went wrong. clean up anything allocated. */
-limit_where_cleanup_1:
- sqlite3SelectDelete(pParse->db, pSelect);
- return 0;
-
-limit_where_cleanup_2:
- sqlite3ExprDelete(pParse->db, pWhere);
- sqlite3ExprListDelete(pParse->db, pOrderBy);
- sqlite3ExprDelete(pParse->db, pLimit);
- sqlite3ExprDelete(pParse->db, pOffset);
- return 0;
}
#endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) */
/* && !defined(SQLITE_OMIT_SUBQUERY) */
SQLITE_PRIVATE void sqlite3DeleteFrom(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table from which we should delete things */
- Expr *pWhere /* The WHERE clause. May be null */
+ Expr *pWhere, /* The WHERE clause. May be null */
+ ExprList *pOrderBy, /* ORDER BY clause. May be null */
+ Expr *pLimit /* LIMIT clause. May be null */
){
Vdbe *v; /* The virtual database engine */
Table *pTab; /* The table from which records will be deleted */
- const char *zDb; /* Name of database holding pTab */
int i; /* Loop counter */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Index *pIdx; /* For looping over indices of the table */
int addrBypass = 0; /* Address of jump over the delete logic */
int addrLoop = 0; /* Top of the delete loop */
int addrEphOpen = 0; /* Instruction to open the Ephemeral table */
+ int bComplex; /* True if there are triggers or FKs or
+ ** subqueries in the WHERE clause */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True if attempting to delete from a view */
Trigger *pTrigger; /* List of table triggers, if required */
- int bComplex; /* True if there are either triggers or FKs */
#endif
memset(&sContext, 0, sizeof(sContext));
}
assert( pTabList->nSrc==1 );
+
/* Locate the table which we want to delete. This table has to be
** put in an SrcList structure because some of the subroutines we
** will be calling are designed to work with multiple tables and expect
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0);
isView = pTab->pSelect!=0;
- bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0);
#else
# define pTrigger 0
# define isView 0
-# define bComplex 0
#endif
+ bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0);
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
+#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT
+ if( !isView ){
+ pWhere = sqlite3LimitWhere(
+ pParse, pTabList, pWhere, pOrderBy, pLimit, "DELETE"
+ );
+ pOrderBy = 0;
+ pLimit = 0;
+ }
+#endif
+
/* If pTab is really a view, make sure it has been initialized.
*/
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb<db->nDb );
- zDb = db->aDb[iDb].zName;
- rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0, zDb);
+ rcauth = sqlite3AuthCheck(pParse, SQLITE_DELETE, pTab->zName, 0,
+ db->aDb[iDb].zDbSName);
assert( rcauth==SQLITE_OK || rcauth==SQLITE_DENY || rcauth==SQLITE_IGNORE );
if( rcauth==SQLITE_DENY ){
goto delete_from_cleanup;
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
- sqlite3MaterializeView(pParse, pTab, pWhere, iTabCur);
+ sqlite3MaterializeView(pParse, pTab,
+ pWhere, pOrderBy, pLimit, iTabCur
+ );
iDataCur = iIdxCur = iTabCur;
+ pOrderBy = 0;
+ pLimit = 0;
}
#endif
/* Special case: A DELETE without a WHERE clause deletes everything.
** It is easier just to erase the whole table. Prior to version 3.6.5,
** this optimization caused the row change count (the value returned by
- ** API function sqlite3_count_changes) to be set incorrectly. */
+ ** API function sqlite3_count_changes) to be set incorrectly.
+ **
+ ** The "rcauth==SQLITE_OK" terms is the
+ ** IMPLEMENTATION-OF: R-17228-37124 If the action code is SQLITE_DELETE and
+ ** the callback returns SQLITE_IGNORE then the DELETE operation proceeds but
+ ** the truncate optimization is disabled and all rows are deleted
+ ** individually.
+ */
if( rcauth==SQLITE_OK
&& pWhere==0
&& !bComplex
&& !IsVirtual(pTab)
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ && db->xPreUpdateCallback==0
+#endif
){
assert( !isView );
sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName);
}else
#endif /* SQLITE_OMIT_TRUNCATE_OPTIMIZATION */
{
- u16 wcf = WHERE_ONEPASS_DESIRED|WHERE_DUPLICATES_OK;
+ u16 wcf = WHERE_ONEPASS_DESIRED|WHERE_DUPLICATES_OK|WHERE_SEEK_TABLE;
+ if( sNC.ncFlags & NC_VarSelect ) bComplex = 1;
wcf |= (bComplex ? 0 : WHERE_ONEPASS_MULTIROW);
if( HasRowid(pTab) ){
/* For a rowid table, initialize the RowSet to an empty set */
** one, so just keep it in its register(s) and fall through to the
** delete code. */
nKey = nPk; /* OP_Found will use an unpacked key */
- aToOpen = sqlite3DbMallocRaw(db, nIdx+2);
+ aToOpen = sqlite3DbMallocRawNN(db, nIdx+2);
if( aToOpen==0 ){
sqlite3WhereEnd(pWInfo);
goto delete_from_cleanup;
nKey = 0; /* Zero tells OP_Found to use a composite key */
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, iKey,
sqlite3IndexAffinityStr(pParse->db, pPk), nPk);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iEphCur, iKey);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEphCur, iKey, iPk, nPk);
}else{
/* Add the rowid of the row to be deleted to the RowSet */
- nKey = 1; /* OP_Seek always uses a single rowid */
+ nKey = 1; /* OP_DeferredSeek always uses a single rowid */
sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, iKey);
}
}
if( !isView ){
int iAddrOnce = 0;
if( eOnePass==ONEPASS_MULTI ){
- iAddrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+ iAddrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
}
testcase( IsVirtual(pTab) );
- sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iTabCur, aToOpen,
- &iDataCur, &iIdxCur);
+ sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, OPFLAG_FORDELETE,
+ iTabCur, aToOpen, &iDataCur, &iIdxCur);
assert( pPk || IsVirtual(pTab) || iDataCur==iTabCur );
assert( pPk || IsVirtual(pTab) || iIdxCur==iDataCur+1 );
if( eOnePass==ONEPASS_MULTI ) sqlite3VdbeJumpHere(v, iAddrOnce);
}
}else if( pPk ){
addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_RowKey, iEphCur, iKey);
+ if( IsVirtual(pTab) ){
+ sqlite3VdbeAddOp3(v, OP_Column, iEphCur, 0, iKey);
+ }else{
+ sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey);
+ }
assert( nKey==0 ); /* OP_Found will use a composite key */
}else{
addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey);
#endif
{
int count = (pParse->nested==0); /* True to count changes */
- int iIdxNoSeek = -1;
- if( bComplex==0 && aiCurOnePass[1]!=iDataCur ){
- iIdxNoSeek = aiCurOnePass[1];
- }
sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur,
- iKey, nKey, count, OE_Default, eOnePass, iIdxNoSeek);
+ iKey, nKey, count, OE_Default, eOnePass, aiCurOnePass[1]);
}
/* End of the loop over all rowids/primary-keys. */
sqlite3VdbeGoto(v, addrLoop);
sqlite3VdbeJumpHere(v, addrLoop);
}
-
- /* Close the cursors open on the table and its indexes. */
- if( !isView && !IsVirtual(pTab) ){
- if( !pPk ) sqlite3VdbeAddOp1(v, OP_Close, iDataCur);
- for(i=0, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){
- sqlite3VdbeAddOp1(v, OP_Close, iIdxCur + i);
- }
- }
} /* End non-truncate path */
/* Update the sqlite_sequence table by storing the content of the
sqlite3AuthContextPop(&sContext);
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprDelete(db, pWhere);
+#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT)
+ sqlite3ExprListDelete(db, pOrderBy);
+ sqlite3ExprDelete(db, pLimit);
+#endif
sqlite3DbFree(db, aToOpen);
return;
}
**
** If eMode is ONEPASS_MULTI, then this call is being made as part
** of a ONEPASS delete that affects multiple rows. In this case, if
-** iIdxNoSeek is a valid cursor number (>=0), then its position should
-** be preserved following the delete operation. Or, if iIdxNoSeek is not
-** a valid cursor number, the position of iDataCur should be preserved
-** instead.
+** iIdxNoSeek is a valid cursor number (>=0) and is not the same as
+** iDataCur, then its position should be preserved following the delete
+** operation. Or, if iIdxNoSeek is not a valid cursor number, the
+** position of iDataCur should be preserved instead.
**
** iIdxNoSeek:
-** If iIdxNoSeek is a valid cursor number (>=0), then it identifies an
-** index cursor (from within array of cursors starting at iIdxCur) that
-** already points to the index entry to be deleted.
+** If iIdxNoSeek is a valid cursor number (>=0) not equal to iDataCur,
+** then it identifies an index cursor (from within array of cursors
+** starting at iIdxCur) that already points to the index entry to be deleted.
+** Except, this optimization is disabled if there are BEFORE triggers since
+** the trigger body might have moved the cursor.
*/
SQLITE_PRIVATE void sqlite3GenerateRowDelete(
Parse *pParse, /* Parsing context */
/* If any BEFORE triggers were coded, then seek the cursor to the
** row to be deleted again. It may be that the BEFORE triggers moved
- ** the cursor or of already deleted the row that the cursor was
+ ** the cursor or already deleted the row that the cursor was
** pointing to.
+ **
+ ** Also disable the iIdxNoSeek optimization since the BEFORE trigger
+ ** may have moved that cursor.
*/
if( addrStart<sqlite3VdbeCurrentAddr(v) ){
sqlite3VdbeAddOp4Int(v, opSeek, iDataCur, iLabel, iPk, nPk);
VdbeCoverageIf(v, opSeek==OP_NotExists);
VdbeCoverageIf(v, opSeek==OP_NotFound);
+ testcase( iIdxNoSeek>=0 );
+ iIdxNoSeek = -1;
}
/* Do FK processing. This call checks that any FK constraints that
/* Delete the index and table entries. Skip this step if pTab is really
** a view (in which case the only effect of the DELETE statement is to
- ** fire the INSTEAD OF triggers). */
+ ** fire the INSTEAD OF triggers).
+ **
+ ** If variable 'count' is non-zero, then this OP_Delete instruction should
+ ** invoke the update-hook. The pre-update-hook, on the other hand should
+ ** be invoked unless table pTab is a system table. The difference is that
+ ** the update-hook is not invoked for rows removed by REPLACE, but the
+ ** pre-update-hook is.
+ */
if( pTab->pSelect==0 ){
+ u8 p5 = 0;
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek);
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0));
- if( count ){
- sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT);
+ if( pParse->nested==0 || 0==sqlite3_stricmp(pTab->zName, "sqlite_stat1") ){
+ sqlite3VdbeAppendP4(v, (char*)pTab, P4_TABLE);
}
- if( iIdxNoSeek>=0 ){
+ if( eMode!=ONEPASS_OFF ){
+ sqlite3VdbeChangeP5(v, OPFLAG_AUXDELETE);
+ }
+ if( iIdxNoSeek>=0 && iIdxNoSeek!=iDataCur ){
sqlite3VdbeAddOp1(v, OP_Delete, iIdxNoSeek);
}
- sqlite3VdbeChangeP5(v, eMode==ONEPASS_MULTI);
+ if( eMode==ONEPASS_MULTI ) p5 |= OPFLAG_SAVEPOSITION;
+ sqlite3VdbeChangeP5(v, p5);
}
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
if( piPartIdxLabel ){
if( pIdx->pPartIdxWhere ){
*piPartIdxLabel = sqlite3VdbeMakeLabel(v);
- pParse->iSelfTab = iDataCur;
+ pParse->iSelfTab = iDataCur + 1;
sqlite3ExprCachePush(pParse);
sqlite3ExprIfFalseDup(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel,
SQLITE_JUMPIFNULL);
+ pParse->iSelfTab = 0;
}else{
*piPartIdxLabel = 0;
}
}
if( regOut ){
sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol, regOut);
+ if( pIdx->pTable->pSelect ){
+ const char *zAff = sqlite3IndexAffinityStr(pParse->db, pIdx);
+ sqlite3VdbeChangeP4(v, -1, zAff, P4_TRANSIENT);
+ }
}
sqlite3ReleaseTempRange(pParse, regBase, nCol);
return regBase;
** iteration of the aggregate loop.
*/
static void sqlite3SkipAccumulatorLoad(sqlite3_context *context){
+ assert( context->isError<=0 );
+ context->isError = -1;
context->skipFlag = 1;
}
int NotUsed,
sqlite3_value **argv
){
- const char *z = 0;
+ static const char *azType[] = { "integer", "real", "text", "blob", "null" };
+ int i = sqlite3_value_type(argv[0]) - 1;
UNUSED_PARAMETER(NotUsed);
- switch( sqlite3_value_type(argv[0]) ){
- case SQLITE_INTEGER: z = "integer"; break;
- case SQLITE_TEXT: z = "text"; break;
- case SQLITE_FLOAT: z = "real"; break;
- case SQLITE_BLOB: z = "blob"; break;
- default: z = "null"; break;
- }
- sqlite3_result_text(context, z, -1, SQLITE_STATIC);
+ assert( i>=0 && i<ArraySize(azType) );
+ assert( SQLITE_INTEGER==1 );
+ assert( SQLITE_FLOAT==2 );
+ assert( SQLITE_TEXT==3 );
+ assert( SQLITE_BLOB==4 );
+ assert( SQLITE_NULL==5 );
+ /* EVIDENCE-OF: R-01470-60482 The sqlite3_value_type(V) interface returns
+ ** the datatype code for the initial datatype of the sqlite3_value object
+ ** V. The returned value is one of SQLITE_INTEGER, SQLITE_FLOAT,
+ ** SQLITE_TEXT, SQLITE_BLOB, or SQLITE_NULL. */
+ sqlite3_result_text(context, azType[i], -1, SQLITE_STATIC);
}
int argc,
sqlite3_value **argv
){
- int len;
-
assert( argc==1 );
UNUSED_PARAMETER(argc);
switch( sqlite3_value_type(argv[0]) ){
}
case SQLITE_TEXT: {
const unsigned char *z = sqlite3_value_text(argv[0]);
+ const unsigned char *z0;
+ unsigned char c;
if( z==0 ) return;
- len = 0;
- while( *z ){
- len++;
- SQLITE_SKIP_UTF8(z);
+ z0 = z;
+ while( (c = *z)!=0 ){
+ z++;
+ if( c>=0xc0 ){
+ while( (*z & 0xc0)==0x80 ){ z++; z0++; }
+ }
}
- sqlite3_result_int(context, len);
+ sqlite3_result_int(context, (int)(z-z0));
break;
}
default: {
if( typeHaystack==SQLITE_NULL || typeNeedle==SQLITE_NULL ) return;
nHaystack = sqlite3_value_bytes(argv[0]);
nNeedle = sqlite3_value_bytes(argv[1]);
- if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){
- zHaystack = sqlite3_value_blob(argv[0]);
- zNeedle = sqlite3_value_blob(argv[1]);
- isText = 0;
- }else{
- zHaystack = sqlite3_value_text(argv[0]);
- zNeedle = sqlite3_value_text(argv[1]);
- isText = 1;
- }
- while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){
- N++;
- do{
- nHaystack--;
- zHaystack++;
- }while( isText && (zHaystack[0]&0xc0)==0x80 );
+ if( nNeedle>0 ){
+ if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){
+ zHaystack = sqlite3_value_blob(argv[0]);
+ zNeedle = sqlite3_value_blob(argv[1]);
+ isText = 0;
+ }else{
+ zHaystack = sqlite3_value_text(argv[0]);
+ zNeedle = sqlite3_value_text(argv[1]);
+ isText = 1;
+ }
+ if( zNeedle==0 || (nHaystack && zHaystack==0) ) return;
+ while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){
+ N++;
+ do{
+ nHaystack--;
+ zHaystack++;
+ }while( isText && (zHaystack[0]&0xc0)==0x80 );
+ }
+ if( nNeedle>nHaystack ) N = 0;
}
- if( nNeedle>nHaystack ) N = 0;
sqlite3_result_int(context, N);
}
x.nUsed = 0;
x.apArg = argv+1;
sqlite3StrAccumInit(&str, db, 0, 0, db->aLimit[SQLITE_LIMIT_LENGTH]);
- sqlite3XPrintf(&str, SQLITE_PRINTF_SQLFUNC, zFormat, &x);
+ str.printfFlags = SQLITE_PRINTF_SQLFUNC;
+ sqlite3XPrintf(&str, zFormat, &x);
n = str.nChar;
sqlite3_result_text(context, sqlite3StrAccumFinish(&str), n,
SQLITE_DYNAMIC);
** A structure defining how to do GLOB-style comparisons.
*/
struct compareInfo {
- u8 matchAll;
- u8 matchOne;
- u8 matchSet;
- u8 noCase;
+ u8 matchAll; /* "*" or "%" */
+ u8 matchOne; /* "?" or "_" */
+ u8 matchSet; /* "[" or 0 */
+ u8 noCase; /* true to ignore case differences */
};
/*
static const struct compareInfo likeInfoAlt = { '%', '_', 0, 0 };
/*
-** Compare two UTF-8 strings for equality where the first string can
-** potentially be a "glob" or "like" expression. Return true (1) if they
-** are the same and false (0) if they are different.
+** Possible error returns from patternMatch()
+*/
+#define SQLITE_MATCH 0
+#define SQLITE_NOMATCH 1
+#define SQLITE_NOWILDCARDMATCH 2
+
+/*
+** Compare two UTF-8 strings for equality where the first string is
+** a GLOB or LIKE expression. Return values:
+**
+** SQLITE_MATCH: Match
+** SQLITE_NOMATCH: No match
+** SQLITE_NOWILDCARDMATCH: No match in spite of having * or % wildcards.
**
** Globbing rules:
**
const u8 *zPattern, /* The glob pattern */
const u8 *zString, /* The string to compare against the glob */
const struct compareInfo *pInfo, /* Information about how to do the compare */
- u32 esc /* The escape character */
+ u32 matchOther /* The escape char (LIKE) or '[' (GLOB) */
){
u32 c, c2; /* Next pattern and input string chars */
u32 matchOne = pInfo->matchOne; /* "?" or "_" */
u32 matchAll = pInfo->matchAll; /* "*" or "%" */
- u32 matchOther; /* "[" or the escape character */
u8 noCase = pInfo->noCase; /* True if uppercase==lowercase */
const u8 *zEscaped = 0; /* One past the last escaped input char */
- /* The GLOB operator does not have an ESCAPE clause. And LIKE does not
- ** have the matchSet operator. So we either have to look for one or
- ** the other, never both. Hence the single variable matchOther is used
- ** to store the one we have to look for.
- */
- matchOther = esc ? esc : pInfo->matchSet;
-
while( (c = Utf8Read(zPattern))!=0 ){
if( c==matchAll ){ /* Match "*" */
/* Skip over multiple "*" characters in the pattern. If there
** single character of the input string for each "?" skipped */
while( (c=Utf8Read(zPattern)) == matchAll || c == matchOne ){
if( c==matchOne && sqlite3Utf8Read(&zString)==0 ){
- return 0;
+ return SQLITE_NOWILDCARDMATCH;
}
}
if( c==0 ){
- return 1; /* "*" at the end of the pattern matches */
+ return SQLITE_MATCH; /* "*" at the end of the pattern matches */
}else if( c==matchOther ){
- if( esc ){
+ if( pInfo->matchSet==0 ){
c = sqlite3Utf8Read(&zPattern);
- if( c==0 ) return 0;
+ if( c==0 ) return SQLITE_NOWILDCARDMATCH;
}else{
/* "[...]" immediately follows the "*". We have to do a slow
** recursive search in this case, but it is an unusual case. */
assert( matchOther<0x80 ); /* '[' is a single-byte character */
- while( *zString
- && patternCompare(&zPattern[-1],zString,pInfo,esc)==0 ){
+ while( *zString ){
+ int bMatch = patternCompare(&zPattern[-1],zString,pInfo,matchOther);
+ if( bMatch!=SQLITE_NOMATCH ) return bMatch;
SQLITE_SKIP_UTF8(zString);
}
- return *zString!=0;
+ return SQLITE_NOWILDCARDMATCH;
}
}
/* At this point variable c contains the first character of the
** pattern string past the "*". Search in the input string for the
- ** first matching character and recursively contine the match from
+ ** first matching character and recursively continue the match from
** that point.
**
** For a case-insensitive search, set variable cx to be the same as
** c or cx.
*/
if( c<=0x80 ){
- u32 cx;
+ char zStop[3];
+ int bMatch;
if( noCase ){
- cx = sqlite3Toupper(c);
- c = sqlite3Tolower(c);
+ zStop[0] = sqlite3Toupper(c);
+ zStop[1] = sqlite3Tolower(c);
+ zStop[2] = 0;
}else{
- cx = c;
+ zStop[0] = c;
+ zStop[1] = 0;
}
- while( (c2 = *(zString++))!=0 ){
- if( c2!=c && c2!=cx ) continue;
- if( patternCompare(zPattern,zString,pInfo,esc) ) return 1;
+ while(1){
+ zString += strcspn((const char*)zString, zStop);
+ if( zString[0]==0 ) break;
+ zString++;
+ bMatch = patternCompare(zPattern,zString,pInfo,matchOther);
+ if( bMatch!=SQLITE_NOMATCH ) return bMatch;
}
}else{
+ int bMatch;
while( (c2 = Utf8Read(zString))!=0 ){
if( c2!=c ) continue;
- if( patternCompare(zPattern,zString,pInfo,esc) ) return 1;
+ bMatch = patternCompare(zPattern,zString,pInfo,matchOther);
+ if( bMatch!=SQLITE_NOMATCH ) return bMatch;
}
}
- return 0;
+ return SQLITE_NOWILDCARDMATCH;
}
if( c==matchOther ){
- if( esc ){
+ if( pInfo->matchSet==0 ){
c = sqlite3Utf8Read(&zPattern);
- if( c==0 ) return 0;
+ if( c==0 ) return SQLITE_NOMATCH;
zEscaped = zPattern;
}else{
u32 prior_c = 0;
int seen = 0;
int invert = 0;
c = sqlite3Utf8Read(&zString);
- if( c==0 ) return 0;
+ if( c==0 ) return SQLITE_NOMATCH;
c2 = sqlite3Utf8Read(&zPattern);
if( c2=='^' ){
invert = 1;
c2 = sqlite3Utf8Read(&zPattern);
}
if( c2==0 || (seen ^ invert)==0 ){
- return 0;
+ return SQLITE_NOMATCH;
}
continue;
}
}
c2 = Utf8Read(zString);
if( c==c2 ) continue;
- if( noCase && c<0x80 && c2<0x80 && sqlite3Tolower(c)==sqlite3Tolower(c2) ){
+ if( noCase && sqlite3Tolower(c)==sqlite3Tolower(c2) && c<0x80 && c2<0x80 ){
continue;
}
if( c==matchOne && zPattern!=zEscaped && c2!=0 ) continue;
- return 0;
+ return SQLITE_NOMATCH;
}
- return *zString==0;
+ return *zString==0 ? SQLITE_MATCH : SQLITE_NOMATCH;
+}
+
+/*
+** The sqlite3_strglob() interface. Return 0 on a match (like strcmp()) and
+** non-zero if there is no match.
+*/
+SQLITE_API int sqlite3_strglob(const char *zGlobPattern, const char *zString){
+ return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, '[');
}
/*
-** The sqlite3_strglob() interface.
+** The sqlite3_strlike() interface. Return 0 on a match and non-zero for
+** a miss - like strcmp().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlobPattern, const char *zString){
- return patternCompare((u8*)zGlobPattern, (u8*)zString, &globInfo, 0)==0;
+SQLITE_API int sqlite3_strlike(const char *zPattern, const char *zStr, unsigned int esc){
+ return patternCompare((u8*)zPattern, (u8*)zStr, &likeInfoNorm, esc);
}
/*
sqlite3_value **argv
){
const unsigned char *zA, *zB;
- u32 escape = 0;
+ u32 escape;
int nPat;
sqlite3 *db = sqlite3_context_db_handle(context);
+ struct compareInfo *pInfo = sqlite3_user_data(context);
+#ifdef SQLITE_LIKE_DOESNT_MATCH_BLOBS
+ if( sqlite3_value_type(argv[0])==SQLITE_BLOB
+ || sqlite3_value_type(argv[1])==SQLITE_BLOB
+ ){
+#ifdef SQLITE_TEST
+ sqlite3_like_count++;
+#endif
+ sqlite3_result_int(context, 0);
+ return;
+ }
+#endif
zB = sqlite3_value_text(argv[0]);
zA = sqlite3_value_text(argv[1]);
return;
}
escape = sqlite3Utf8Read(&zEsc);
+ }else{
+ escape = pInfo->matchSet;
}
if( zA && zB ){
- struct compareInfo *pInfo = sqlite3_user_data(context);
#ifdef SQLITE_TEST
sqlite3_like_count++;
#endif
-
- sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape));
+ sqlite3_result_int(context,
+ patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH);
}
}
i64 nOut; /* Maximum size of zOut */
int loopLimit; /* Last zStr[] that might match zPattern[] */
int i, j; /* Loop counters */
+ unsigned cntExpand; /* Number zOut expansions */
+ sqlite3 *db = sqlite3_context_db_handle(context);
assert( argc==3 );
UNUSED_PARAMETER(argc);
return;
}
loopLimit = nStr - nPattern;
+ cntExpand = 0;
for(i=j=0; i<=loopLimit; i++){
if( zStr[i]!=zPattern[0] || memcmp(&zStr[i], zPattern, nPattern) ){
zOut[j++] = zStr[i];
}else{
- u8 *zOld;
- sqlite3 *db = sqlite3_context_db_handle(context);
- nOut += nRep - nPattern;
- testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] );
- testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] );
- if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){
- sqlite3_result_error_toobig(context);
- sqlite3_free(zOut);
- return;
- }
- zOld = zOut;
- zOut = sqlite3_realloc64(zOut, (int)nOut);
- if( zOut==0 ){
- sqlite3_result_error_nomem(context);
- sqlite3_free(zOld);
- return;
+ if( nRep>nPattern ){
+ nOut += nRep - nPattern;
+ testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] );
+ testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] );
+ if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){
+ sqlite3_result_error_toobig(context);
+ sqlite3_free(zOut);
+ return;
+ }
+ cntExpand++;
+ if( (cntExpand&(cntExpand-1))==0 ){
+ /* Grow the size of the output buffer only on substitutions
+ ** whose index is a power of two: 1, 2, 4, 8, 16, 32, ... */
+ u8 *zOld;
+ zOld = zOut;
+ zOut = sqlite3_realloc64(zOut, (int)nOut + (nOut - nStr - 1));
+ if( zOut==0 ){
+ sqlite3_result_error_nomem(context);
+ sqlite3_free(zOld);
+ return;
+ }
+ }
}
memcpy(&zOut[j], zRep, nRep);
j += nRep;
i += nPattern-1;
}
}
- assert( j+nStr-i+1==nOut );
+ assert( j+nStr-i+1<=nOut );
memcpy(&zOut[j], &zStr[i], nStr-i);
j += nStr - i;
assert( j<=nOut );
}
+#ifdef SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION
+/*
+** The "unknown" function is automatically substituted in place of
+** any unrecognized function name when doing an EXPLAIN or EXPLAIN QUERY PLAN
+** when the SQLITE_ENABLE_UNKNOWN_FUNCTION compile-time option is used.
+** When the "sqlite3" command-line shell is built using this functionality,
+** that allows an EXPLAIN or EXPLAIN QUERY PLAN for complex queries
+** involving application-defined functions to be examined in a generic
+** sqlite3 shell.
+*/
+static void unknownFunc(
+ sqlite3_context *context,
+ int argc,
+ sqlite3_value **argv
+){
+ /* no-op */
+}
+#endif /*SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION*/
+
+
/* IMP: R-25361-16150 This function is omitted from SQLite by default. It
** is only available if the SQLITE_SOUNDEX compile-time option is used
** when SQLite is built.
sqlite3 *db = sqlite3_context_db_handle(context);
char *zErrMsg = 0;
+ /* Disallow the load_extension() SQL function unless the SQLITE_LoadExtFunc
+ ** flag is set. See the sqlite3_enable_load_extension() API.
+ */
+ if( (db->flags & SQLITE_LoadExtFunc)==0 ){
+ sqlite3_result_error(context, "not authorized", -1);
+ return;
+ }
+
if( argc==2 ){
zProc = (const char *)sqlite3_value_text(argv[1]);
}else{
zSep = ",";
nSep = 1;
}
- if( nSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep);
+ if( zSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep);
}
zVal = (char*)sqlite3_value_text(argv[0]);
nVal = sqlite3_value_bytes(argv[0]);
** of the built-in functions above are part of the global function set.
** This routine only deals with those that are not global.
*/
-SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(sqlite3 *db){
+SQLITE_PRIVATE void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3 *db){
int rc = sqlite3_overload_function(db, "MATCH", 2);
assert( rc==SQLITE_NOMEM || rc==SQLITE_OK );
if( rc==SQLITE_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
}
*/
static void setLikeOptFlag(sqlite3 *db, const char *zName, u8 flagVal){
FuncDef *pDef;
- pDef = sqlite3FindFunction(db, zName, sqlite3Strlen30(zName),
- 2, SQLITE_UTF8, 0);
+ pDef = sqlite3FindFunction(db, zName, 2, SQLITE_UTF8, 0);
if( ALWAYS(pDef) ){
pDef->funcFlags |= flagVal;
}
/*
** pExpr points to an expression which implements a function. If
** it is appropriate to apply the LIKE optimization to that function
-** then set aWc[0] through aWc[2] to the wildcard characters and
-** return TRUE. If the function is not a LIKE-style function then
-** return FALSE.
+** then set aWc[0] through aWc[2] to the wildcard characters and the
+** escape character and then return TRUE. If the function is not a
+** LIKE-style function then return FALSE.
+**
+** The expression "a LIKE b ESCAPE c" is only considered a valid LIKE
+** operator if c is a string literal that is exactly one byte in length.
+** That one byte is stored in aWc[3]. aWc[3] is set to zero if there is
+** no ESCAPE clause.
**
** *pIsNocase is set to true if uppercase and lowercase are equivalent for
** the function (default for LIKE). If the function makes the distinction
*/
SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3 *db, Expr *pExpr, int *pIsNocase, char *aWc){
FuncDef *pDef;
- if( pExpr->op!=TK_FUNCTION
- || !pExpr->x.pList
- || pExpr->x.pList->nExpr!=2
- ){
+ int nExpr;
+ if( pExpr->op!=TK_FUNCTION || !pExpr->x.pList ){
return 0;
}
assert( !ExprHasProperty(pExpr, EP_xIsSelect) );
- pDef = sqlite3FindFunction(db, pExpr->u.zToken,
- sqlite3Strlen30(pExpr->u.zToken),
- 2, SQLITE_UTF8, 0);
+ nExpr = pExpr->x.pList->nExpr;
+ pDef = sqlite3FindFunction(db, pExpr->u.zToken, nExpr, SQLITE_UTF8, 0);
if( NEVER(pDef==0) || (pDef->funcFlags & SQLITE_FUNC_LIKE)==0 ){
return 0;
}
+ if( nExpr<3 ){
+ aWc[3] = 0;
+ }else{
+ Expr *pEscape = pExpr->x.pList->a[2].pExpr;
+ char *zEscape;
+ if( pEscape->op!=TK_STRING ) return 0;
+ zEscape = pEscape->u.zToken;
+ if( zEscape[0]==0 || zEscape[1]!=0 ) return 0;
+ aWc[3] = zEscape[0];
+ }
/* The memcpy() statement assumes that the wildcard characters are
** the first three statements in the compareInfo structure. The
**
** After this routine runs
*/
-SQLITE_PRIVATE void sqlite3RegisterGlobalFunctions(void){
+SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void){
/*
** The following array holds FuncDef structures for all of the functions
** defined in this file.
** The array cannot be constant since changes are made to the
** FuncDef.pHash elements at start-time. The elements of this array
** are read-only after initialization is complete.
+ **
+ ** For peak efficiency, put the most frequently used function last.
*/
- static SQLITE_WSD FuncDef aBuiltinFunc[] = {
+ static FuncDef aBuiltinFunc[] = {
+#ifdef SQLITE_SOUNDEX
+ FUNCTION(soundex, 1, 0, 0, soundexFunc ),
+#endif
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+ VFUNCTION(load_extension, 1, 0, 0, loadExt ),
+ VFUNCTION(load_extension, 2, 0, 0, loadExt ),
+#endif
+#if SQLITE_USER_AUTHENTICATION
+ FUNCTION(sqlite_crypt, 2, 0, 0, sqlite3CryptFunc ),
+#endif
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+ DFUNCTION(sqlite_compileoption_used,1, 0, 0, compileoptionusedFunc ),
+ DFUNCTION(sqlite_compileoption_get, 1, 0, 0, compileoptiongetFunc ),
+#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
+ FUNCTION2(unlikely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
+ FUNCTION2(likelihood, 2, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
+ FUNCTION2(likely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
+#ifdef SQLITE_DEBUG
+ FUNCTION2(affinity, 1, 0, 0, noopFunc, SQLITE_FUNC_AFFINITY),
+#endif
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
+ FUNCTION2(sqlite_offset, 1, 0, 0, noopFunc, SQLITE_FUNC_OFFSET|
+ SQLITE_FUNC_TYPEOF),
+#endif
FUNCTION(ltrim, 1, 1, 0, trimFunc ),
FUNCTION(ltrim, 2, 1, 0, trimFunc ),
FUNCTION(rtrim, 1, 2, 0, trimFunc ),
FUNCTION2(typeof, 1, 0, 0, typeofFunc, SQLITE_FUNC_TYPEOF),
FUNCTION2(length, 1, 0, 0, lengthFunc, SQLITE_FUNC_LENGTH),
FUNCTION(instr, 2, 0, 0, instrFunc ),
- FUNCTION(substr, 2, 0, 0, substrFunc ),
- FUNCTION(substr, 3, 0, 0, substrFunc ),
FUNCTION(printf, -1, 0, 0, printfFunc ),
FUNCTION(unicode, 1, 0, 0, unicodeFunc ),
FUNCTION(char, -1, 0, 0, charFunc ),
#endif
FUNCTION(upper, 1, 0, 0, upperFunc ),
FUNCTION(lower, 1, 0, 0, lowerFunc ),
- FUNCTION(coalesce, 1, 0, 0, 0 ),
- FUNCTION(coalesce, 0, 0, 0, 0 ),
- FUNCTION2(coalesce, -1, 0, 0, noopFunc, SQLITE_FUNC_COALESCE),
FUNCTION(hex, 1, 0, 0, hexFunc ),
FUNCTION2(ifnull, 2, 0, 0, noopFunc, SQLITE_FUNC_COALESCE),
- FUNCTION2(unlikely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
- FUNCTION2(likelihood, 2, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
- FUNCTION2(likely, 1, 0, 0, noopFunc, SQLITE_FUNC_UNLIKELY),
VFUNCTION(random, 0, 0, 0, randomFunc ),
VFUNCTION(randomblob, 1, 0, 0, randomBlob ),
FUNCTION(nullif, 2, 0, 1, nullifFunc ),
DFUNCTION(sqlite_version, 0, 0, 0, versionFunc ),
DFUNCTION(sqlite_source_id, 0, 0, 0, sourceidFunc ),
FUNCTION(sqlite_log, 2, 0, 0, errlogFunc ),
-#if SQLITE_USER_AUTHENTICATION
- FUNCTION(sqlite_crypt, 2, 0, 0, sqlite3CryptFunc ),
-#endif
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
- DFUNCTION(sqlite_compileoption_used,1, 0, 0, compileoptionusedFunc ),
- DFUNCTION(sqlite_compileoption_get, 1, 0, 0, compileoptiongetFunc ),
-#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
FUNCTION(quote, 1, 0, 0, quoteFunc ),
VFUNCTION(last_insert_rowid, 0, 0, 0, last_insert_rowid),
VFUNCTION(changes, 0, 0, 0, changes ),
VFUNCTION(total_changes, 0, 0, 0, total_changes ),
FUNCTION(replace, 3, 0, 0, replaceFunc ),
FUNCTION(zeroblob, 1, 0, 0, zeroblobFunc ),
- #ifdef SQLITE_SOUNDEX
- FUNCTION(soundex, 1, 0, 0, soundexFunc ),
- #endif
- #ifndef SQLITE_OMIT_LOAD_EXTENSION
- VFUNCTION(load_extension, 1, 0, 0, loadExt ),
- VFUNCTION(load_extension, 2, 0, 0, loadExt ),
- #endif
+ FUNCTION(substr, 2, 0, 0, substrFunc ),
+ FUNCTION(substr, 3, 0, 0, substrFunc ),
AGGREGATE(sum, 1, 0, 0, sumStep, sumFinalize ),
AGGREGATE(total, 1, 0, 0, sumStep, totalFinalize ),
AGGREGATE(avg, 1, 0, 0, sumStep, avgFinalize ),
AGGREGATE(group_concat, 2, 0, 0, groupConcatStep, groupConcatFinalize),
LIKEFUNC(glob, 2, &globInfo, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE),
- #ifdef SQLITE_CASE_SENSITIVE_LIKE
+#ifdef SQLITE_CASE_SENSITIVE_LIKE
LIKEFUNC(like, 2, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE),
LIKEFUNC(like, 3, &likeInfoAlt, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE),
- #else
+#else
LIKEFUNC(like, 2, &likeInfoNorm, SQLITE_FUNC_LIKE),
LIKEFUNC(like, 3, &likeInfoNorm, SQLITE_FUNC_LIKE),
- #endif
+#endif
+#ifdef SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION
+ FUNCTION(unknown, -1, 0, 0, unknownFunc ),
+#endif
+ FUNCTION(coalesce, 1, 0, 0, 0 ),
+ FUNCTION(coalesce, 0, 0, 0, 0 ),
+ FUNCTION2(coalesce, -1, 0, 0, noopFunc, SQLITE_FUNC_COALESCE),
};
-
- int i;
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
- FuncDef *aFunc = (FuncDef*)&GLOBAL(FuncDef, aBuiltinFunc);
-
- for(i=0; i<ArraySize(aBuiltinFunc); i++){
- sqlite3FuncDefInsert(pHash, &aFunc[i]);
- }
- sqlite3RegisterDateTimeFunctions();
#ifndef SQLITE_OMIT_ALTERTABLE
sqlite3AlterFunctions();
#endif
#if defined(SQLITE_ENABLE_STAT3) || defined(SQLITE_ENABLE_STAT4)
sqlite3AnalyzeFunctions();
+#endif
+ sqlite3RegisterDateTimeFunctions();
+ sqlite3InsertBuiltinFuncs(aBuiltinFunc, ArraySize(aBuiltinFunc));
+
+#if 0 /* Enable to print out how the built-in functions are hashed */
+ {
+ int i;
+ FuncDef *p;
+ for(i=0; i<SQLITE_FUNC_HASH_SZ; i++){
+ printf("FUNC-HASH %02d:", i);
+ for(p=sqlite3BuiltinFunctions.a[i]; p; p=p->u.pHash){
+ int n = sqlite3Strlen30(p->zName);
+ int h = p->zName[0] + n;
+ printf(" %s(%d)", p->zName, h);
+ }
+ printf("\n");
+ }
+ }
#endif
}
}
}else if( paiCol ){
assert( nCol>1 );
- aiCol = (int *)sqlite3DbMallocRaw(pParse->db, nCol*sizeof(int));
+ aiCol = (int *)sqlite3DbMallocRawNN(pParse->db, nCol*sizeof(int));
if( !aiCol ) return 1;
*paiCol = aiCol;
}
for(pIdx=pParent->pIndex; pIdx; pIdx=pIdx->pNext){
- if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) ){
+ if( pIdx->nKeyCol==nCol && IsUniqueIndex(pIdx) && pIdx->pPartIdxWhere==0 ){
/* pIdx is a UNIQUE index (or a PRIMARY KEY) and has the right number
** of columns. If each indexed column corresponds to a foreign key
** column of pFKey, then this index is a winner. */
int i, j;
for(i=0; i<nCol; i++){
i16 iCol = pIdx->aiColumn[i]; /* Index of column in parent tbl */
- char *zDfltColl; /* Def. collation for column */
+ const char *zDfltColl; /* Def. collation for column */
char *zIdxCol; /* Name of indexed column */
if( iCol<0 ) break; /* No foreign keys against expression indexes */
** the default collation sequence for the column, this index is
** unusable. Bail out early in this case. */
zDfltColl = pParent->aCol[iCol].zColl;
- if( !zDfltColl ){
- zDfltColl = "BINARY";
- }
+ if( !zDfltColl ) zDfltColl = sqlite3StrBINARY;
if( sqlite3StrICmp(pIdx->azColl[i], zDfltColl) ) break;
zIdxCol = pParent->aCol[iCol].zName;
assert( iCol>=0 );
zCol = pFKey->pFrom->aCol[iCol].zName;
pRight = sqlite3Expr(db, TK_ID, zCol);
- pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0);
+ pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight);
pWhere = sqlite3ExprAnd(db, pWhere, pEq);
}
if( HasRowid(pTab) ){
pLeft = exprTableRegister(pParse, pTab, regData, -1);
pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, -1);
- pNe = sqlite3PExpr(pParse, TK_NE, pLeft, pRight, 0);
+ pNe = sqlite3PExpr(pParse, TK_NE, pLeft, pRight);
}else{
Expr *pEq, *pAll = 0;
Index *pPk = sqlite3PrimaryKeyIndex(pTab);
assert( iCol>=0 );
pLeft = exprTableRegister(pParse, pTab, regData, iCol);
pRight = exprTableColumn(db, pTab, pSrc->a[0].iCursor, iCol);
- pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight, 0);
+ pEq = sqlite3PExpr(pParse, TK_EQ, pLeft, pRight);
pAll = sqlite3ExprAnd(db, pAll, pEq);
}
- pNe = sqlite3PExpr(pParse, TK_NOT, pAll, 0, 0);
+ pNe = sqlite3PExpr(pParse, TK_NOT, pAll, 0);
}
pWhere = sqlite3ExprAnd(db, pWhere, pNe);
}
/* Create VDBE to loop through the entries in pSrc that match the WHERE
** clause. For each row found, increment either the deferred or immediate
** foreign key constraint counter. */
- pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0);
- sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr);
- if( pWInfo ){
- sqlite3WhereEnd(pWInfo);
+ if( pParse->nErr==0 ){
+ pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0);
+ sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr);
+ if( pWInfo ){
+ sqlite3WhereEnd(pWInfo);
+ }
}
/* Clean up the WHERE clause constructed above. */
}
pParse->disableTriggers = 1;
- sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0);
+ sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0, 0, 0);
pParse->disableTriggers = 0;
/* If the DELETE has generated immediate foreign key constraint
if( (db->flags&SQLITE_ForeignKeys)==0 ) return;
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
- zDb = db->aDb[iDb].zName;
+ zDb = db->aDb[iDb].zDbSName;
/* Loop through all the foreign key constraints for which pTab is the
** child table (the table that the foreign key definition is part of). */
struct SrcList_item *pItem = pSrc->a;
pItem->pTab = pFKey->pFrom;
pItem->zName = pFKey->pFrom->zName;
- pItem->pTab->nRef++;
+ pItem->pTab->nTabRef++;
pItem->iCursor = pParse->nTab++;
if( regNew!=0 ){
** UPDATE statement modifies the rowid fields of the table.
**
** If any foreign key processing will be required, this function returns
-** true. If there is no foreign key related processing, this function
-** returns false.
+** non-zero. If there is no foreign key related processing, this function
+** returns zero.
+**
+** For an UPDATE, this function returns 2 if:
+**
+** * There are any FKs for which pTab is the child and the parent table, or
+** * the UPDATE modifies one or more parent keys for which the action is
+** not "NO ACTION" (i.e. is CASCADE, SET DEFAULT or SET NULL).
+**
+** Or, assuming some other foreign key processing is required, 1.
*/
SQLITE_PRIVATE int sqlite3FkRequired(
Parse *pParse, /* Parse context */
int *aChange, /* Non-NULL for UPDATE operations */
int chngRowid /* True for UPDATE that affects rowid */
){
+ int eRet = 0;
if( pParse->db->flags&SQLITE_ForeignKeys ){
if( !aChange ){
/* A DELETE operation. Foreign key processing is required if the
** table in question is either the child or parent table for any
** foreign key constraint. */
- return (sqlite3FkReferences(pTab) || pTab->pFKey);
+ eRet = (sqlite3FkReferences(pTab) || pTab->pFKey);
}else{
/* This is an UPDATE. Foreign key processing is only required if the
** operation modifies one or more child or parent key columns. */
/* Check if any child key columns are being modified. */
for(p=pTab->pFKey; p; p=p->pNextFrom){
- if( fkChildIsModified(pTab, p, aChange, chngRowid) ) return 1;
+ if( 0==sqlite3_stricmp(pTab->zName, p->zTo) ) return 2;
+ if( fkChildIsModified(pTab, p, aChange, chngRowid) ){
+ eRet = 1;
+ }
}
/* Check if any parent key columns are being modified. */
for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){
- if( fkParentIsModified(pTab, p, aChange, chngRowid) ) return 1;
+ if( fkParentIsModified(pTab, p, aChange, chngRowid) ){
+ if( p->aAction[1]!=OE_None ) return 2;
+ eRet = 1;
+ }
}
}
}
- return 0;
+ return eRet;
}
/*
int iAction = (pChanges!=0); /* 1 for UPDATE, 0 for DELETE */
action = pFKey->aAction[iAction];
+ if( action==OE_Restrict && (db->flags & SQLITE_DeferFKs) ){
+ return 0;
+ }
pTrigger = pFKey->apTrigger[iAction];
if( action!=OE_None && !pTrigger ){
- u8 enableLookaside; /* Copy of db->lookaside.bEnabled */
char const *zFrom; /* Name of child table */
int nFrom; /* Length in bytes of zFrom */
Index *pIdx = 0; /* Parent key index for this FK */
assert( iFromCol>=0 );
assert( pIdx!=0 || (pTab->iPKey>=0 && pTab->iPKey<pTab->nCol) );
assert( pIdx==0 || pIdx->aiColumn[i]>=0 );
- tToCol.z = pTab->aCol[pIdx ? pIdx->aiColumn[i] : pTab->iPKey].zName;
- tFromCol.z = pFKey->pFrom->aCol[iFromCol].zName;
-
- tToCol.n = sqlite3Strlen30(tToCol.z);
- tFromCol.n = sqlite3Strlen30(tFromCol.z);
+ sqlite3TokenInit(&tToCol,
+ pTab->aCol[pIdx ? pIdx->aiColumn[i] : pTab->iPKey].zName);
+ sqlite3TokenInit(&tFromCol, pFKey->pFrom->aCol[iFromCol].zName);
/* Create the expression "OLD.zToCol = zFromCol". It is important
** that the "OLD.zToCol" term is on the LHS of the = operator, so
pEq = sqlite3PExpr(pParse, TK_EQ,
sqlite3PExpr(pParse, TK_DOT,
sqlite3ExprAlloc(db, TK_ID, &tOld, 0),
- sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)
- , 0),
+ sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)),
sqlite3ExprAlloc(db, TK_ID, &tFromCol, 0)
- , 0);
+ );
pWhere = sqlite3ExprAnd(db, pWhere, pEq);
/* For ON UPDATE, construct the next term of the WHEN clause.
pEq = sqlite3PExpr(pParse, TK_IS,
sqlite3PExpr(pParse, TK_DOT,
sqlite3ExprAlloc(db, TK_ID, &tOld, 0),
- sqlite3ExprAlloc(db, TK_ID, &tToCol, 0),
- 0),
+ sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)),
sqlite3PExpr(pParse, TK_DOT,
sqlite3ExprAlloc(db, TK_ID, &tNew, 0),
- sqlite3ExprAlloc(db, TK_ID, &tToCol, 0),
- 0),
- 0);
+ sqlite3ExprAlloc(db, TK_ID, &tToCol, 0))
+ );
pWhen = sqlite3ExprAnd(db, pWhen, pEq);
}
if( action==OE_Cascade ){
pNew = sqlite3PExpr(pParse, TK_DOT,
sqlite3ExprAlloc(db, TK_ID, &tNew, 0),
- sqlite3ExprAlloc(db, TK_ID, &tToCol, 0)
- , 0);
+ sqlite3ExprAlloc(db, TK_ID, &tToCol, 0));
}else if( action==OE_SetDflt ){
Expr *pDflt = pFKey->pFrom->aCol[iFromCol].pDflt;
if( pDflt ){
pNew = sqlite3ExprDup(db, pDflt, 0);
}else{
- pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0);
+ pNew = sqlite3ExprAlloc(db, TK_NULL, 0, 0);
}
}else{
- pNew = sqlite3PExpr(pParse, TK_NULL, 0, 0, 0);
+ pNew = sqlite3ExprAlloc(db, TK_NULL, 0, 0);
}
pList = sqlite3ExprListAppend(pParse, pList, pNew);
sqlite3ExprListSetName(pParse, pList, &tFromCol, 0);
sqlite3ExprListAppend(pParse, 0, pRaise),
sqlite3SrcListAppend(db, 0, &tFrom, 0),
pWhere,
- 0, 0, 0, 0, 0, 0
+ 0, 0, 0, 0, 0
);
pWhere = 0;
}
/* Disable lookaside memory allocation */
- enableLookaside = db->lookaside.bEnabled;
- db->lookaside.bEnabled = 0;
+ db->lookaside.bDisable++;
pTrigger = (Trigger *)sqlite3DbMallocZero(db,
sizeof(Trigger) + /* struct Trigger */
pStep->pExprList = sqlite3ExprListDup(db, pList, EXPRDUP_REDUCE);
pStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE);
if( pWhen ){
- pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0, 0);
+ pWhen = sqlite3PExpr(pParse, TK_NOT, pWhen, 0);
pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE);
}
}
/* Re-enable the lookaside buffer, if it was disabled earlier. */
- db->lookaside.bEnabled = enableLookaside;
+ db->lookaside.bDisable--;
sqlite3ExprDelete(db, pWhere);
sqlite3ExprDelete(db, pWhen);
FKey *pFKey; /* Iterator variable */
FKey *pNext; /* Copy of pFKey->pNextFrom */
- assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pTab->pSchema) );
+ assert( db==0 || IsVirtual(pTab)
+ || sqlite3SchemaMutexHeld(db, 0, pTab->pSchema) );
for(pFKey=pTab->pFKey; pFKey; pFKey=pNext){
/* Remove the FK from the fkeyHash hash table. */
Table *pTab = pIdx->pTable;
pIdx->zColAff = (char *)sqlite3DbMallocRaw(0, pIdx->nColumn+1);
if( !pIdx->zColAff ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return 0;
}
for(n=0; n<pIdx->nColumn; n++){
sqlite3 *db = sqlite3VdbeDb(v);
zColAff = (char *)sqlite3DbMallocRaw(0, pTab->nCol+1);
if( !zColAff ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
return;
}
/*
** Locate or create an AutoincInfo structure associated with table pTab
** which is in database iDb. Return the register number for the register
-** that holds the maximum rowid.
+** that holds the maximum rowid. Return zero if pTab is not an AUTOINCREMENT
+** table. (Also return zero when doing a VACUUM since we do not want to
+** update the AUTOINCREMENT counters during a VACUUM.)
**
** There is at most one AutoincInfo structure per table even if the
** same table is autoincremented multiple times due to inserts within
** first use of table pTab. On 2nd and subsequent uses, the original
** AutoincInfo structure is used.
**
-** Three memory locations are allocated:
+** Four consecutive registers are allocated:
**
-** (1) Register to hold the name of the pTab table.
-** (2) Register to hold the maximum ROWID of pTab.
-** (3) Register to hold the rowid in sqlite_sequence of pTab
+** (1) The name of the pTab table.
+** (2) The maximum ROWID of pTab.
+** (3) The rowid in sqlite_sequence of pTab
+** (4) The original value of the max ROWID in pTab, or NULL if none
**
** The 2nd register is the one that is returned. That is all the
** insert routine needs to know about.
Table *pTab /* The table we are writing to */
){
int memId = 0; /* Register holding maximum rowid */
- if( pTab->tabFlags & TF_Autoincrement ){
+ if( (pTab->tabFlags & TF_Autoincrement)!=0
+ && (pParse->db->mDbFlags & DBFLAG_Vacuum)==0
+ ){
Parse *pToplevel = sqlite3ParseToplevel(pParse);
AutoincInfo *pInfo;
pInfo = pToplevel->pAinc;
while( pInfo && pInfo->pTab!=pTab ){ pInfo = pInfo->pNext; }
if( pInfo==0 ){
- pInfo = sqlite3DbMallocRaw(pParse->db, sizeof(*pInfo));
+ pInfo = sqlite3DbMallocRawNN(pParse->db, sizeof(*pInfo));
if( pInfo==0 ) return 0;
pInfo->pNext = pToplevel->pAinc;
pToplevel->pAinc = pInfo;
pInfo->iDb = iDb;
pToplevel->nMem++; /* Register to hold name of table */
pInfo->regCtr = ++pToplevel->nMem; /* Max rowid register */
- pToplevel->nMem++; /* Rowid in sqlite_sequence */
+ pToplevel->nMem +=2; /* Rowid in sqlite_sequence + orig max val */
}
memId = pInfo->regCtr;
}
sqlite3 *db = pParse->db; /* The database connection */
Db *pDb; /* Database only autoinc table */
int memId; /* Register holding max rowid */
- int addr; /* A VDBE address */
Vdbe *v = pParse->pVdbe; /* VDBE under construction */
/* This routine is never called during trigger-generation. It is
assert( v ); /* We failed long ago if this is not so */
for(p = pParse->pAinc; p; p = p->pNext){
+ static const int iLn = VDBE_OFFSET_LINENO(2);
+ static const VdbeOpList autoInc[] = {
+ /* 0 */ {OP_Null, 0, 0, 0},
+ /* 1 */ {OP_Rewind, 0, 10, 0},
+ /* 2 */ {OP_Column, 0, 0, 0},
+ /* 3 */ {OP_Ne, 0, 9, 0},
+ /* 4 */ {OP_Rowid, 0, 0, 0},
+ /* 5 */ {OP_Column, 0, 1, 0},
+ /* 6 */ {OP_AddImm, 0, 0, 0},
+ /* 7 */ {OP_Copy, 0, 0, 0},
+ /* 8 */ {OP_Goto, 0, 11, 0},
+ /* 9 */ {OP_Next, 0, 2, 0},
+ /* 10 */ {OP_Integer, 0, 0, 0},
+ /* 11 */ {OP_Close, 0, 0, 0}
+ };
+ VdbeOp *aOp;
pDb = &db->aDb[p->iDb];
memId = p->regCtr;
assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) );
sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenRead);
- sqlite3VdbeAddOp3(v, OP_Null, 0, memId, memId+1);
- addr = sqlite3VdbeCurrentAddr(v);
sqlite3VdbeLoadString(v, memId-1, p->pTab->zName);
- sqlite3VdbeAddOp2(v, OP_Rewind, 0, addr+9); VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_Column, 0, 0, memId);
- sqlite3VdbeAddOp3(v, OP_Ne, memId-1, addr+7, memId); VdbeCoverage(v);
- sqlite3VdbeChangeP5(v, SQLITE_JUMPIFNULL);
- sqlite3VdbeAddOp2(v, OP_Rowid, 0, memId+1);
- sqlite3VdbeAddOp3(v, OP_Column, 0, 1, memId);
- sqlite3VdbeGoto(v, addr+9);
- sqlite3VdbeAddOp2(v, OP_Next, 0, addr+2); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_Integer, 0, memId);
- sqlite3VdbeAddOp0(v, OP_Close);
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(autoInc), autoInc, iLn);
+ if( aOp==0 ) break;
+ aOp[0].p2 = memId;
+ aOp[0].p3 = memId+2;
+ aOp[2].p3 = memId;
+ aOp[3].p1 = memId-1;
+ aOp[3].p3 = memId;
+ aOp[3].p5 = SQLITE_JUMPIFNULL;
+ aOp[4].p2 = memId+1;
+ aOp[5].p3 = memId;
+ aOp[6].p1 = memId;
+ aOp[7].p2 = memId+2;
+ aOp[7].p1 = memId;
+ aOp[10].p2 = memId;
}
}
/*
** Update the maximum rowid for an autoincrement calculation.
**
-** This routine should be called when the top of the stack holds a
+** This routine should be called when the regRowid register holds a
** new rowid that is about to be inserted. If that new rowid is
** larger than the maximum rowid in the memId memory cell, then the
-** memory cell is updated. The stack is unchanged.
+** memory cell is updated.
*/
static void autoIncStep(Parse *pParse, int memId, int regRowid){
if( memId>0 ){
** table (either directly or through triggers) needs to call this
** routine just before the "exit" code.
*/
-SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse){
+static SQLITE_NOINLINE void autoIncrementEnd(Parse *pParse){
AutoincInfo *p;
Vdbe *v = pParse->pVdbe;
sqlite3 *db = pParse->db;
assert( v );
for(p = pParse->pAinc; p; p = p->pNext){
+ static const int iLn = VDBE_OFFSET_LINENO(2);
+ static const VdbeOpList autoIncEnd[] = {
+ /* 0 */ {OP_NotNull, 0, 2, 0},
+ /* 1 */ {OP_NewRowid, 0, 0, 0},
+ /* 2 */ {OP_MakeRecord, 0, 2, 0},
+ /* 3 */ {OP_Insert, 0, 0, 0},
+ /* 4 */ {OP_Close, 0, 0, 0}
+ };
+ VdbeOp *aOp;
Db *pDb = &db->aDb[p->iDb];
- int addr1;
int iRec;
int memId = p->regCtr;
iRec = sqlite3GetTempReg(pParse);
assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) );
+ sqlite3VdbeAddOp3(v, OP_Le, memId+2, sqlite3VdbeCurrentAddr(v)+7, memId);
+ VdbeCoverage(v);
sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenWrite);
- addr1 = sqlite3VdbeAddOp1(v, OP_NotNull, memId+1); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_NewRowid, 0, memId+1);
- sqlite3VdbeJumpHere(v, addr1);
- sqlite3VdbeAddOp3(v, OP_MakeRecord, memId-1, 2, iRec);
- sqlite3VdbeAddOp3(v, OP_Insert, 0, iRec, memId+1);
- sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
- sqlite3VdbeAddOp0(v, OP_Close);
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(autoIncEnd), autoIncEnd, iLn);
+ if( aOp==0 ) break;
+ aOp[0].p1 = memId+1;
+ aOp[1].p2 = memId+1;
+ aOp[2].p1 = memId-1;
+ aOp[2].p3 = iRec;
+ aOp[3].p2 = iRec;
+ aOp[3].p3 = memId+1;
+ aOp[3].p5 = OPFLAG_APPEND;
sqlite3ReleaseTempReg(pParse, iRec);
}
}
+SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse){
+ if( pParse->pAinc ) autoIncrementEnd(pParse);
+}
#else
/*
** If SQLITE_OMIT_AUTOINCREMENT is defined, then the three routines
){
sqlite3 *db; /* The main database structure */
Table *pTab; /* The table to insert into. aka TABLE */
- char *zTab; /* Name of the table into which we are inserting */
- const char *zDb; /* Name of the database holding this table */
- int i, j, idx; /* Loop counters */
+ int i, j; /* Loop counters */
Vdbe *v; /* Generate code into this virtual machine */
Index *pIdx; /* For looping over indices of the table */
int nColumn; /* Number of columns in the data */
int addrCont = 0; /* Top of insert loop. Label "C" in templates 3 and 4 */
SelectDest dest; /* Destination for SELECT on rhs of INSERT */
int iDb; /* Index of database holding TABLE */
- Db *pDb; /* The database containing table being inserted into */
u8 useTempTable = 0; /* Store SELECT results in intermediate table */
u8 appendFlag = 0; /* True if the insert is likely to be an append */
u8 withoutRowid; /* 0 for normal table. 1 for WITHOUT ROWID table */
#endif
db = pParse->db;
- memset(&dest, 0, sizeof(dest));
if( pParse->nErr || db->mallocFailed ){
goto insert_cleanup;
}
+ dest.iSDParm = 0; /* Suppress a harmless compiler warning */
/* If the Select object is really just a simple VALUES() list with a
** single row (the common case) then keep that one row of values
/* Locate the table into which we will be inserting new information.
*/
assert( pTabList->nSrc==1 );
- zTab = pTabList->a[0].zName;
- if( NEVER(zTab==0) ) goto insert_cleanup;
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ){
goto insert_cleanup;
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
assert( iDb<db->nDb );
- pDb = &db->aDb[iDb];
- zDb = pDb->zName;
- if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0, zDb) ){
+ if( sqlite3AuthCheck(pParse, SQLITE_INSERT, pTab->zName, 0,
+ db->aDb[iDb].zDbSName) ){
goto insert_cleanup;
}
withoutRowid = !HasRowid(pTab);
rc = sqlite3Select(pParse, pSelect, &dest);
regFromSelect = dest.iSdst;
if( rc || db->mallocFailed || pParse->nErr ) goto insert_cleanup;
- sqlite3VdbeAddOp1(v, OP_EndCoroutine, regYield);
+ sqlite3VdbeEndCoroutine(v, regYield);
sqlite3VdbeJumpHere(v, addrTop - 1); /* label B: */
assert( pSelect->pEList );
nColumn = pSelect->pEList->nExpr;
/* Make sure the number of columns in the source data matches the number
** of columns to be inserted into the table.
*/
- if( IsVirtual(pTab) ){
- for(i=0; i<pTab->nCol; i++){
- nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0);
- }
+ for(i=0; i<pTab->nCol; i++){
+ nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0);
}
if( pColumn==0 && nColumn && nColumn!=(pTab->nCol-nHidden) ){
sqlite3ErrorMsg(pParse,
/* If this is not a view, open the table and and all indices */
if( !isView ){
int nIdx;
- nIdx = sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, -1, 0,
+ nIdx = sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, -1, 0,
&iDataCur, &iIdxCur);
- aRegIdx = sqlite3DbMallocRaw(db, sizeof(int)*(nIdx+1));
+ aRegIdx = sqlite3DbMallocRawNN(db, sizeof(int)*(nIdx+1));
if( aRegIdx==0 ){
goto insert_cleanup;
}
- for(i=0; i<nIdx; i++){
+ for(i=0, pIdx=pTab->pIndex; i<nIdx; pIdx=pIdx->pNext, i++){
+ assert( pIdx );
aRegIdx[i] = ++pParse->nMem;
+ pParse->nMem += pIdx->nColumn;
}
}
/* Create the new column data
*/
- for(i=0; i<pTab->nCol; i++){
- if( pColumn==0 ){
- j = i;
- }else{
+ for(i=j=0; i<pTab->nCol; i++){
+ if( pColumn ){
for(j=0; j<pColumn->nId; j++){
if( pColumn->a[j].idx==i ) break;
}
}
- if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId) ){
+ if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId)
+ || (pColumn==0 && IsOrdinaryHiddenColumn(&pTab->aCol[i])) ){
sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regCols+i+1);
}else if( useTempTable ){
sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, regCols+i+1);
assert( pSelect==0 ); /* Otherwise useTempTable is true */
sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr, regCols+i+1);
}
+ if( pColumn==0 && !IsOrdinaryHiddenColumn(&pTab->aCol[i]) ) j++;
}
/* If this is an INSERT on a view with an INSTEAD OF INSERT trigger,
VdbeOp *pOp;
sqlite3ExprCode(pParse, pList->a[ipkColumn].pExpr, regRowid);
pOp = sqlite3VdbeGetOp(v, -1);
- if( ALWAYS(pOp) && pOp->opcode==OP_Null && !IsVirtual(pTab) ){
+ assert( pOp!=0 );
+ if( pOp->opcode==OP_Null && !IsVirtual(pTab) ){
appendFlag = 1;
pOp->opcode = OP_NewRowid;
pOp->p1 = iDataCur;
}
if( pColumn==0 ){
if( IsHiddenColumn(&pTab->aCol[i]) ){
- assert( IsVirtual(pTab) );
j = -1;
nHidden++;
}else{
#endif
{
int isReplace; /* Set to true if constraints may cause a replace */
+ int bUseSeek; /* True to use OPFLAG_SEEKRESULT */
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
- regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace
+ regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0
);
sqlite3FkCheck(pParse, pTab, 0, regIns, 0, 0);
+
+ /* Set the OPFLAG_USESEEKRESULT flag if either (a) there are no REPLACE
+ ** constraints or (b) there are no triggers and this table is not a
+ ** parent table in a foreign key constraint. It is safe to set the
+ ** flag in the second case as if any REPLACE constraint is hit, an
+ ** OP_Delete or OP_IdxDelete instruction will be executed on each
+ ** cursor that is disturbed. And these instructions both clear the
+ ** VdbeCursor.seekResult variable, disabling the OPFLAG_USESEEKRESULT
+ ** functionality. */
+ bUseSeek = (isReplace==0 || (pTrigger==0 &&
+ ((db->flags & SQLITE_ForeignKeys)==0 || sqlite3FkReferences(pTab)==0)
+ ));
sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur,
- regIns, aRegIdx, 0, appendFlag, isReplace==0);
+ regIns, aRegIdx, 0, appendFlag, bUseSeek
+ );
}
}
sqlite3VdbeJumpHere(v, addrInsTop);
}
- if( !IsVirtual(pTab) && !isView ){
- /* Close all tables opened */
- if( iDataCur<iIdxCur ) sqlite3VdbeAddOp1(v, OP_Close, iDataCur);
- for(idx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, idx++){
- sqlite3VdbeAddOp1(v, OP_Close, idx+iIdxCur);
- }
- }
-
insert_end:
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
#undef tmask
#endif
+/*
+** Meanings of bits in of pWalker->eCode for checkConstraintUnchanged()
+*/
+#define CKCNSTRNT_COLUMN 0x01 /* CHECK constraint uses a changing column */
+#define CKCNSTRNT_ROWID 0x02 /* CHECK constraint references the ROWID */
+
+/* This is the Walker callback from checkConstraintUnchanged(). Set
+** bit 0x01 of pWalker->eCode if
+** pWalker->eCode to 0 if this expression node references any of the
+** columns that are being modifed by an UPDATE statement.
+*/
+static int checkConstraintExprNode(Walker *pWalker, Expr *pExpr){
+ if( pExpr->op==TK_COLUMN ){
+ assert( pExpr->iColumn>=0 || pExpr->iColumn==-1 );
+ if( pExpr->iColumn>=0 ){
+ if( pWalker->u.aiCol[pExpr->iColumn]>=0 ){
+ pWalker->eCode |= CKCNSTRNT_COLUMN;
+ }
+ }else{
+ pWalker->eCode |= CKCNSTRNT_ROWID;
+ }
+ }
+ return WRC_Continue;
+}
+
+/*
+** pExpr is a CHECK constraint on a row that is being UPDATE-ed. The
+** only columns that are modified by the UPDATE are those for which
+** aiChng[i]>=0, and also the ROWID is modified if chngRowid is true.
+**
+** Return true if CHECK constraint pExpr does not use any of the
+** changing columns (or the rowid if it is changing). In other words,
+** return true if this CHECK constraint can be skipped when validating
+** the new row in the UPDATE statement.
+*/
+static int checkConstraintUnchanged(Expr *pExpr, int *aiChng, int chngRowid){
+ Walker w;
+ memset(&w, 0, sizeof(w));
+ w.eCode = 0;
+ w.xExprCallback = checkConstraintExprNode;
+ w.u.aiCol = aiChng;
+ sqlite3WalkExpr(&w, pExpr);
+ if( !chngRowid ){
+ testcase( (w.eCode & CKCNSTRNT_ROWID)!=0 );
+ w.eCode &= ~CKCNSTRNT_ROWID;
+ }
+ testcase( w.eCode==0 );
+ testcase( w.eCode==CKCNSTRNT_COLUMN );
+ testcase( w.eCode==CKCNSTRNT_ROWID );
+ testcase( w.eCode==(CKCNSTRNT_ROWID|CKCNSTRNT_COLUMN) );
+ return !w.eCode;
+}
+
/*
** Generate code to do constraint checks prior to an INSERT or an UPDATE
** on table pTab.
u8 pkChng, /* Non-zero if the rowid or PRIMARY KEY changed */
u8 overrideError, /* Override onError to this if not OE_Default */
int ignoreDest, /* Jump to this label on an OE_Ignore resolution */
- int *pbMayReplace /* OUT: Set to true if constraint may cause a replace */
+ int *pbMayReplace, /* OUT: Set to true if constraint may cause a replace */
+ int *aiChng /* column i is unchanged if aiChng[i]<0 */
){
Vdbe *v; /* VDBE under constrution */
Index *pIdx; /* Pointer to one of the indices */
int ipkBottom = 0; /* Bottom of the rowid change constraint check */
u8 isUpdate; /* True if this is an UPDATE operation */
u8 bAffinityDone = 0; /* True if the OP_Affinity operation has been run */
- int regRowid = -1; /* Register holding ROWID value */
isUpdate = regOldData!=0;
db = pParse->db;
*/
for(i=0; i<nCol; i++){
if( i==pTab->iPKey ){
+ continue; /* ROWID is never NULL */
+ }
+ if( aiChng && aiChng[i]<0 ){
+ /* Don't bother checking for NOT NULL on columns that do not change */
continue;
}
onError = pTab->aCol[i].notNull;
- if( onError==OE_None ) continue;
+ if( onError==OE_None ) continue; /* This column is allowed to be NULL */
if( overrideError!=OE_Default ){
onError = overrideError;
}else if( onError==OE_Default ){
case OE_Fail: {
char *zMsg = sqlite3MPrintf(db, "%s.%s", pTab->zName,
pTab->aCol[i].zName);
- sqlite3VdbeAddOp4(v, OP_HaltIfNull, SQLITE_CONSTRAINT_NOTNULL, onError,
- regNewData+1+i, zMsg, P4_DYNAMIC);
+ sqlite3VdbeAddOp3(v, OP_HaltIfNull, SQLITE_CONSTRAINT_NOTNULL, onError,
+ regNewData+1+i);
+ sqlite3VdbeAppendP4(v, zMsg, P4_DYNAMIC);
sqlite3VdbeChangeP5(v, P5_ConstraintNotNull);
VdbeCoverage(v);
break;
#ifndef SQLITE_OMIT_CHECK
if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){
ExprList *pCheck = pTab->pCheck;
- pParse->ckBase = regNewData+1;
+ pParse->iSelfTab = -(regNewData+1);
onError = overrideError!=OE_Default ? overrideError : OE_Abort;
for(i=0; i<pCheck->nExpr; i++){
- int allOk = sqlite3VdbeMakeLabel(v);
- sqlite3ExprIfTrue(pParse, pCheck->a[i].pExpr, allOk, SQLITE_JUMPIFNULL);
+ int allOk;
+ Expr *pExpr = pCheck->a[i].pExpr;
+ if( aiChng && checkConstraintUnchanged(pExpr, aiChng, pkChng) ) continue;
+ allOk = sqlite3VdbeMakeLabel(v);
+ sqlite3ExprIfTrue(pParse, pExpr, allOk, SQLITE_JUMPIFNULL);
if( onError==OE_Ignore ){
sqlite3VdbeGoto(v, ignoreDest);
}else{
}
sqlite3VdbeResolveLabel(v, allOk);
}
+ pParse->iSelfTab = 0;
}
#endif /* !defined(SQLITE_OMIT_CHECK) */
}
if( isUpdate ){
- /* pkChng!=0 does not mean that the rowid has change, only that
+ /* pkChng!=0 does not mean that the rowid has changed, only that
** it might have changed. Skip the conflict logic below if the rowid
** is unchanged. */
sqlite3VdbeAddOp3(v, OP_Eq, regNewData, addrRowidOk, regOldData);
if( pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0) ){
sqlite3MultiWrite(pParse);
sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur,
- regNewData, 1, 0, OE_Replace,
- ONEPASS_SINGLE, -1);
+ regNewData, 1, 0, OE_Replace, 1, -1);
}else{
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ if( HasRowid(pTab) ){
+ /* This OP_Delete opcode fires the pre-update-hook only. It does
+ ** not modify the b-tree. It is more efficient to let the coming
+ ** OP_Insert replace the existing entry than it is to delete the
+ ** existing entry and then insert a new one. */
+ sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP);
+ sqlite3VdbeAppendP4(v, pTab, P4_TABLE);
+ }
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
if( pTab->pIndex ){
sqlite3MultiWrite(pParse);
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,-1);
/* Skip partial indices for which the WHERE clause is not true */
if( pIdx->pPartIdxWhere ){
sqlite3VdbeAddOp2(v, OP_Null, 0, aRegIdx[ix]);
- pParse->ckBase = regNewData+1;
+ pParse->iSelfTab = -(regNewData+1);
sqlite3ExprIfFalseDup(pParse, pIdx->pPartIdxWhere, addrUniqueOk,
SQLITE_JUMPIFNULL);
- pParse->ckBase = 0;
+ pParse->iSelfTab = 0;
}
/* Create a record for this index entry as it should appear after
** the insert or update. Store that record in the aRegIdx[ix] register
*/
- regIdx = sqlite3GetTempRange(pParse, pIdx->nColumn);
+ regIdx = aRegIdx[ix]+1;
for(i=0; i<pIdx->nColumn; i++){
int iField = pIdx->aiColumn[i];
int x;
if( iField==XN_EXPR ){
- pParse->ckBase = regNewData+1;
- sqlite3ExprCode(pParse, pIdx->aColExpr->a[i].pExpr, regIdx+i);
- pParse->ckBase = 0;
+ pParse->iSelfTab = -(regNewData+1);
+ sqlite3ExprCodeCopy(pParse, pIdx->aColExpr->a[i].pExpr, regIdx+i);
+ pParse->iSelfTab = 0;
VdbeComment((v, "%s column %d", pIdx->zName, i));
}else{
if( iField==XN_ROWID || iField==pTab->iPKey ){
- if( regRowid==regIdx+i ) continue; /* ROWID already in regIdx+i */
x = regNewData;
- regRowid = pIdx->pPartIdxWhere ? -1 : regIdx+i;
}else{
x = iField + regNewData + 1;
}
- sqlite3VdbeAddOp2(v, OP_SCopy, x, regIdx+i);
+ sqlite3VdbeAddOp2(v, iField<0 ? OP_IntCopy : OP_SCopy, x, regIdx+i);
VdbeComment((v, "%s", iField<0 ? "rowid" : pTab->aCol[iField].zName));
}
}
sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn, aRegIdx[ix]);
VdbeComment((v, "for %s", pIdx->zName));
- sqlite3ExprCacheAffinityChange(pParse, regIdx, pIdx->nColumn);
+#ifdef SQLITE_ENABLE_NULL_TRIM
+ if( pIdx->idxType==2 ) sqlite3SetMakeRecordP5(v, pIdx->pTable);
+#endif
/* In an UPDATE operation, if this index is the PRIMARY KEY index
** of a WITHOUT ROWID table and there has been no change the
/* Find out what action to take in case there is a uniqueness conflict */
onError = pIdx->onError;
if( onError==OE_None ){
- sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn);
sqlite3VdbeResolveLabel(v, addrUniqueOk);
continue; /* pIdx is not a UNIQUE index */
}
}else if( onError==OE_Default ){
onError = OE_Abort;
}
-
+
+ /* Collision detection may be omitted if all of the following are true:
+ ** (1) The conflict resolution algorithm is REPLACE
+ ** (2) The table is a WITHOUT ROWID table
+ ** (3) There are no secondary indexes on the table
+ ** (4) No delete triggers need to be fired if there is a conflict
+ ** (5) No FK constraint counters need to be updated if a conflict occurs.
+ */
+ if( (ix==0 && pIdx->pNext==0) /* Condition 3 */
+ && pPk==pIdx /* Condition 2 */
+ && onError==OE_Replace /* Condition 1 */
+ && ( 0==(db->flags&SQLITE_RecTriggers) || /* Condition 4 */
+ 0==sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0))
+ && ( 0==(db->flags&SQLITE_ForeignKeys) || /* Condition 5 */
+ (0==pTab->pFKey && 0==sqlite3FkReferences(pTab)))
+ ){
+ sqlite3VdbeResolveLabel(v, addrUniqueOk);
+ continue;
+ }
+
/* Check to see if the new index entry will be unique */
+ sqlite3ExprCachePush(pParse);
sqlite3VdbeAddOp4Int(v, OP_NoConflict, iThisCur, addrUniqueOk,
regIdx, pIdx->nKeyCol); VdbeCoverage(v);
}
sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur,
regR, nPkField, 0, OE_Replace,
- (pIdx==pPk ? ONEPASS_SINGLE : ONEPASS_OFF), -1);
+ (pIdx==pPk ? ONEPASS_SINGLE : ONEPASS_OFF), iThisCur);
seenReplace = 1;
break;
}
}
sqlite3VdbeResolveLabel(v, addrUniqueOk);
- sqlite3ReleaseTempRange(pParse, regIdx, pIdx->nColumn);
+ sqlite3ExprCachePop(pParse);
if( regR!=regIdx ) sqlite3ReleaseTempRange(pParse, regR, nPkField);
}
if( ipkTop ){
VdbeModuleComment((v, "END: GenCnstCks(%d)", seenReplace));
}
+#ifdef SQLITE_ENABLE_NULL_TRIM
+/*
+** Change the P5 operand on the last opcode (which should be an OP_MakeRecord)
+** to be the number of columns in table pTab that must not be NULL-trimmed.
+**
+** Or if no columns of pTab may be NULL-trimmed, leave P5 at zero.
+*/
+SQLITE_PRIVATE void sqlite3SetMakeRecordP5(Vdbe *v, Table *pTab){
+ u16 i;
+
+ /* Records with omitted columns are only allowed for schema format
+ ** version 2 and later (SQLite version 3.1.4, 2005-02-20). */
+ if( pTab->pSchema->file_format<2 ) return;
+
+ for(i=pTab->nCol-1; i>0; i--){
+ if( pTab->aCol[i].pDflt!=0 ) break;
+ if( pTab->aCol[i].colFlags & COLFLAG_PRIMKEY ) break;
+ }
+ sqlite3VdbeChangeP5(v, i+1);
+}
+#endif
+
/*
** This routine generates code to finish the INSERT or UPDATE operation
** that was started by a prior call to sqlite3GenerateConstraintChecks.
int iIdxCur, /* First index cursor */
int regNewData, /* Range of content */
int *aRegIdx, /* Register used by each index. 0 for unused indices */
- int isUpdate, /* True for UPDATE, False for INSERT */
+ int update_flags, /* True for UPDATE, False for INSERT */
int appendBias, /* True if this is likely to be an append */
int useSeekResult /* True to set the USESEEKRESULT flag on OP_[Idx]Insert */
){
int i; /* Loop counter */
u8 bAffinityDone = 0; /* True if OP_Affinity has been run already */
+ assert( update_flags==0
+ || update_flags==OPFLAG_ISUPDATE
+ || update_flags==(OPFLAG_ISUPDATE|OPFLAG_SAVEPOSITION)
+ );
+
v = sqlite3GetVdbe(pParse);
assert( v!=0 );
assert( pTab->pSelect==0 ); /* This table is not a VIEW */
sqlite3VdbeAddOp2(v, OP_IsNull, aRegIdx[i], sqlite3VdbeCurrentAddr(v)+2);
VdbeCoverage(v);
}
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i]);
- pik_flags = 0;
- if( useSeekResult ) pik_flags = OPFLAG_USESEEKRESULT;
+ pik_flags = (useSeekResult ? OPFLAG_USESEEKRESULT : 0);
if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
assert( pParse->nested==0 );
pik_flags |= OPFLAG_NCHANGE;
+ pik_flags |= (update_flags & OPFLAG_SAVEPOSITION);
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ if( update_flags==0 ){
+ sqlite3VdbeAddOp4(v, OP_InsertInt,
+ iIdxCur+i, aRegIdx[i], 0, (char*)pTab, P4_TABLE
+ );
+ sqlite3VdbeChangeP5(v, OPFLAG_ISNOOP);
+ }
+#endif
}
- if( pik_flags ) sqlite3VdbeChangeP5(v, pik_flags);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iIdxCur+i, aRegIdx[i],
+ aRegIdx[i]+1,
+ pIdx->uniqNotNull ? pIdx->nKeyCol: pIdx->nColumn);
+ sqlite3VdbeChangeP5(v, pik_flags);
}
if( !HasRowid(pTab) ) return;
regData = regNewData + 1;
regRec = sqlite3GetTempReg(pParse);
sqlite3VdbeAddOp3(v, OP_MakeRecord, regData, pTab->nCol, regRec);
- if( !bAffinityDone ) sqlite3TableAffinity(v, pTab, 0);
- sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol);
+ sqlite3SetMakeRecordP5(v, pTab);
+ if( !bAffinityDone ){
+ sqlite3TableAffinity(v, pTab, 0);
+ sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol);
+ }
if( pParse->nested ){
pik_flags = 0;
}else{
pik_flags = OPFLAG_NCHANGE;
- pik_flags |= (isUpdate?OPFLAG_ISUPDATE:OPFLAG_LASTROWID);
+ pik_flags |= (update_flags?update_flags:OPFLAG_LASTROWID);
}
if( appendBias ){
pik_flags |= OPFLAG_APPEND;
}
sqlite3VdbeAddOp3(v, OP_Insert, iDataCur, regRec, regNewData);
if( !pParse->nested ){
- sqlite3VdbeChangeP4(v, -1, pTab->zName, P4_TRANSIENT);
+ sqlite3VdbeAppendP4(v, pTab, P4_TABLE);
}
sqlite3VdbeChangeP5(v, pik_flags);
}
Parse *pParse, /* Parsing context */
Table *pTab, /* Table to be opened */
int op, /* OP_OpenRead or OP_OpenWrite */
+ u8 p5, /* P5 value for OP_Open* opcodes (except on WITHOUT ROWID) */
int iBase, /* Use this for the table cursor, if there is one */
u8 *aToOpen, /* If not NULL: boolean for each table and index */
int *piDataCur, /* Write the database source cursor number here */
Vdbe *v;
assert( op==OP_OpenRead || op==OP_OpenWrite );
+ assert( op==OP_OpenWrite || p5==0 );
if( IsVirtual(pTab) ){
/* This routine is a no-op for virtual tables. Leave the output
** variables *piDataCur and *piIdxCur uninitialized so that valgrind
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
int iIdxCur = iBase++;
assert( pIdx->pSchema==pTab->pSchema );
- if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) && piDataCur ){
- *piDataCur = iIdxCur;
+ if( IsPrimaryKeyIndex(pIdx) && !HasRowid(pTab) ){
+ if( piDataCur ) *piDataCur = iIdxCur;
+ p5 = 0;
}
if( aToOpen==0 || aToOpen[i+1] ){
sqlite3VdbeAddOp3(v, op, iIdxCur, pIdx->tnum, iDb);
sqlite3VdbeSetP4KeyInfo(pParse, pIdx);
+ sqlite3VdbeChangeP5(v, p5);
VdbeComment((v, "%s", pIdx->zName));
}
}
#ifndef SQLITE_OMIT_XFER_OPT
-/*
-** Check to collation names to see if they are compatible.
-*/
-static int xferCompatibleCollation(const char *z1, const char *z2){
- if( z1==0 ){
- return z2==0;
- }
- if( z2==0 ){
- return 0;
- }
- return sqlite3StrICmp(z1, z2)==0;
-}
-
-
/*
** Check to see if index pSrc is compatible as a source of data
** for index pDest in an insert transfer optimization. The rules
}
if( pSrc->aiColumn[i]==XN_EXPR ){
assert( pSrc->aColExpr!=0 && pDest->aColExpr!=0 );
- if( sqlite3ExprCompare(pSrc->aColExpr->a[i].pExpr,
+ if( sqlite3ExprCompare(0, pSrc->aColExpr->a[i].pExpr,
pDest->aColExpr->a[i].pExpr, -1)!=0 ){
return 0; /* Different expressions in the index */
}
if( pSrc->aSortOrder[i]!=pDest->aSortOrder[i] ){
return 0; /* Different sort orders */
}
- if( !xferCompatibleCollation(pSrc->azColl[i],pDest->azColl[i]) ){
+ if( sqlite3_stricmp(pSrc->azColl[i],pDest->azColl[i])!=0 ){
return 0; /* Different collating sequences */
}
}
- if( sqlite3ExprCompare(pSrc->pPartIdxWhere, pDest->pPartIdxWhere, -1) ){
+ if( sqlite3ExprCompare(0, pSrc->pPartIdxWhere, pDest->pPartIdxWhere, -1) ){
return 0; /* Different WHERE clauses */
}
return 0; /* tab1 must not have triggers */
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
- if( pDest->tabFlags & TF_Virtual ){
+ if( IsVirtual(pDest) ){
return 0; /* tab1 must not be a virtual table */
}
#endif
if( pSelect->pLimit ){
return 0; /* SELECT may not have a LIMIT clause */
}
- assert( pSelect->pOffset==0 ); /* Must be so if pLimit==0 */
if( pSelect->pPrior ){
return 0; /* SELECT may not be a compound query */
}
return 0; /* The result set must have exactly one column */
}
assert( pEList->a[0].pExpr );
- if( pEList->a[0].pExpr->op!=TK_ALL ){
+ if( pEList->a[0].pExpr->op!=TK_ASTERISK ){
return 0; /* The result set must be the special operator "*" */
}
return 0; /* source and destination must both be WITHOUT ROWID or not */
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
- if( pSrc->tabFlags & TF_Virtual ){
+ if( IsVirtual(pSrc) ){
return 0; /* tab2 must not be a virtual table */
}
#endif
for(i=0; i<pDest->nCol; i++){
Column *pDestCol = &pDest->aCol[i];
Column *pSrcCol = &pSrc->aCol[i];
+#ifdef SQLITE_ENABLE_HIDDEN_COLUMNS
+ if( (db->mDbFlags & DBFLAG_Vacuum)==0
+ && (pDestCol->colFlags | pSrcCol->colFlags) & COLFLAG_HIDDEN
+ ){
+ return 0; /* Neither table may have __hidden__ columns */
+ }
+#endif
if( pDestCol->affinity!=pSrcCol->affinity ){
return 0; /* Affinity must be the same on all columns */
}
- if( !xferCompatibleCollation(pDestCol->zColl, pSrcCol->zColl) ){
+ if( sqlite3_stricmp(pDestCol->zColl, pSrcCol->zColl)!=0 ){
return 0; /* Collating sequence must be the same on all columns */
}
if( pDestCol->notNull && !pSrcCol->notNull ){
return 0; /* tab2 must be NOT NULL if tab1 is */
}
/* Default values for second and subsequent columns need to match. */
- if( i>0
- && ((pDestCol->zDflt==0)!=(pSrcCol->zDflt==0)
- || (pDestCol->zDflt && strcmp(pDestCol->zDflt, pSrcCol->zDflt)!=0))
- ){
- return 0; /* Default values must be the same for all columns */
+ if( i>0 ){
+ assert( pDestCol->pDflt==0 || pDestCol->pDflt->op==TK_SPAN );
+ assert( pSrcCol->pDflt==0 || pSrcCol->pDflt->op==TK_SPAN );
+ if( (pDestCol->pDflt==0)!=(pSrcCol->pDflt==0)
+ || (pDestCol->pDflt && strcmp(pDestCol->pDflt->u.zToken,
+ pSrcCol->pDflt->u.zToken)!=0)
+ ){
+ return 0; /* Default values must be the same for all columns */
+ }
}
}
for(pDestIdx=pDest->pIndex; pDestIdx; pDestIdx=pDestIdx->pNext){
regRowid = sqlite3GetTempReg(pParse);
sqlite3OpenTable(pParse, iDest, iDbDest, pDest, OP_OpenWrite);
assert( HasRowid(pDest) || destHasUniqueIdx );
- if( (db->flags & SQLITE_Vacuum)==0 && (
+ if( (db->mDbFlags & DBFLAG_Vacuum)==0 && (
(pDest->iPKey<0 && pDest->pIndex!=0) /* (1) */
|| destHasUniqueIdx /* (2) */
|| (onError!=OE_Abort && onError!=OE_Rollback) /* (3) */
)){
/* In some circumstances, we are able to run the xfer optimization
** only if the destination table is initially empty. Unless the
- ** SQLITE_Vacuum flag is set, this block generates code to make
- ** that determination. If SQLITE_Vacuum is set, then the destination
+ ** DBFLAG_Vacuum flag is set, this block generates code to make
+ ** that determination. If DBFLAG_Vacuum is set, then the destination
** table is always empty.
**
** Conditions under which the destination must be empty:
sqlite3VdbeJumpHere(v, addr1);
}
if( HasRowid(pSrc) ){
+ u8 insFlags;
sqlite3OpenTable(pParse, iSrc, iDbSrc, pSrc, OP_OpenRead);
emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v);
if( pDest->iPKey>=0 ){
addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid);
assert( (pDest->tabFlags & TF_Autoincrement)==0 );
}
- sqlite3VdbeAddOp2(v, OP_RowData, iSrc, regData);
- sqlite3VdbeAddOp3(v, OP_Insert, iDest, regData, regRowid);
- sqlite3VdbeChangeP5(v, OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND);
- sqlite3VdbeChangeP4(v, -1, pDest->zName, 0);
+ sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1);
+ if( db->mDbFlags & DBFLAG_Vacuum ){
+ sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest);
+ insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID|
+ OPFLAG_APPEND|OPFLAG_USESEEKRESULT;
+ }else{
+ insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID|OPFLAG_APPEND;
+ }
+ sqlite3VdbeAddOp4(v, OP_Insert, iDest, regData, regRowid,
+ (char*)pDest, P4_TABLE);
+ sqlite3VdbeChangeP5(v, insFlags);
sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1); VdbeCoverage(v);
sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0);
sqlite3VdbeAddOp2(v, OP_Close, iDest, 0);
sqlite3VdbeChangeP5(v, OPFLAG_BULKCSR);
VdbeComment((v, "%s", pDestIdx->zName));
addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_RowKey, iSrc, regData);
- if( db->flags & SQLITE_Vacuum ){
+ sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1);
+ if( db->mDbFlags & DBFLAG_Vacuum ){
/* This INSERT command is part of a VACUUM operation, which guarantees
** that the destination table is empty. If all indexed columns use
** collation sequence BINARY, then it can also be assumed that the
** index will be populated by inserting keys in strictly sorted
** order. In this case, instead of seeking within the b-tree as part
- ** of every OP_IdxInsert opcode, an OP_Last is added before the
+ ** of every OP_IdxInsert opcode, an OP_SeekEnd is added before the
** OP_IdxInsert to seek to the point within the b-tree where each key
** should be inserted. This is faster.
**
** a VACUUM command. In that case keys may not be written in strictly
** sorted order. */
for(i=0; i<pSrcIdx->nColumn; i++){
- char *zColl = pSrcIdx->azColl[i];
- assert( zColl!=0 );
- if( sqlite3_stricmp("BINARY", zColl) ) break;
+ const char *zColl = pSrcIdx->azColl[i];
+ if( sqlite3_stricmp(sqlite3StrBINARY, zColl) ) break;
}
if( i==pSrcIdx->nColumn ){
idxInsFlags = OPFLAG_USESEEKRESULT;
- sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1);
+ sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest);
}
}
if( !HasRowid(pSrc) && pDestIdx->idxType==2 ){
idxInsFlags |= OPFLAG_NCHANGE;
}
- sqlite3VdbeAddOp3(v, OP_IdxInsert, iDest, regData, 1);
- sqlite3VdbeChangeP5(v, idxInsFlags);
+ sqlite3VdbeAddOp2(v, OP_IdxInsert, iDest, regData);
+ sqlite3VdbeChangeP5(v, idxInsFlags|OPFLAG_APPEND);
sqlite3VdbeAddOp2(v, OP_Next, iSrc, addr1+1); VdbeCoverage(v);
sqlite3VdbeJumpHere(v, addr1);
sqlite3VdbeAddOp2(v, OP_Close, iSrc, 0);
sqlite3ReleaseTempReg(pParse, regRowid);
sqlite3ReleaseTempReg(pParse, regData);
if( emptyDestTest ){
+ sqlite3AutoincrementEnd(pParse);
sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_OK, 0);
sqlite3VdbeJumpHere(v, emptyDestTest);
sqlite3VdbeAddOp2(v, OP_Close, iDest, 0);
** argument to xCallback(). If xCallback=NULL then no callback
** is invoked, even for queries.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
sqlite3 *db, /* The database on which the SQL executes */
const char *zSql, /* The SQL to be executed */
sqlite3_callback xCallback, /* Invoke this callback routine */
(SQLITE_DONE==rc && !callbackIsInit
&& db->flags&SQLITE_NullCallback)) ){
if( !callbackIsInit ){
- azCols = sqlite3DbMallocZero(db, 2*nCol*sizeof(const char*) + 1);
+ azCols = sqlite3DbMallocRaw(db, (2*nCol+1)*sizeof(const char*));
if( azCols==0 ){
goto exec_out;
}
for(i=0; i<nCol; i++){
azVals[i] = (char *)sqlite3_column_text(pStmt, i);
if( !azVals[i] && sqlite3_column_type(pStmt, i)!=SQLITE_NULL ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
goto exec_out;
}
}
+ azVals[i] = 0;
}
if( xCallback(pArg, nCol, azVals, azCols) ){
/* EVIDENCE-OF: R-38229-40159 If the callback function to
rc = sqlite3ApiExit(db, rc);
if( rc!=SQLITE_OK && pzErrMsg ){
- int nErrMsg = 1 + sqlite3Strlen30(sqlite3_errmsg(db));
- *pzErrMsg = sqlite3Malloc(nErrMsg);
- if( *pzErrMsg ){
- memcpy(*pzErrMsg, sqlite3_errmsg(db), nErrMsg);
- }else{
- rc = SQLITE_NOMEM;
+ *pzErrMsg = sqlite3DbStrDup(0, sqlite3_errmsg(db));
+ if( *pzErrMsg==0 ){
+ rc = SQLITE_NOMEM_BKPT;
sqlite3Error(db, SQLITE_NOMEM);
}
}else if( pzErrMsg ){
** as extensions by SQLite should #include this file instead of
** sqlite3.h.
*/
-#ifndef _SQLITE3EXT_H_
-#define _SQLITE3EXT_H_
+#ifndef SQLITE3EXT_H
+#define SQLITE3EXT_H
/* #include "sqlite3.h" */
-typedef struct sqlite3_api_routines sqlite3_api_routines;
-
/*
** The following structure holds pointers to all of the SQLite API
** routines.
int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*,
const char*,const char*),void*);
void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*));
- char * (*snprintf)(int,char*,const char*,...);
+ char * (*xsnprintf)(int,char*,const char*,...);
int (*step)(sqlite3_stmt*);
int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*,
char const**,char const**,int*,int*,int*);
int (*uri_boolean)(const char*,const char*,int);
sqlite3_int64 (*uri_int64)(const char*,const char*,sqlite3_int64);
const char *(*uri_parameter)(const char*,const char*);
- char *(*vsnprintf)(int,char*,const char*,va_list);
+ char *(*xvsnprintf)(int,char*,const char*,va_list);
int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*);
/* Version 3.8.7 and later */
int (*auto_extension)(void(*)(void));
/* Version 3.9.0 and later */
unsigned int (*value_subtype)(sqlite3_value*);
void (*result_subtype)(sqlite3_context*,unsigned int);
+ /* Version 3.10.0 and later */
+ int (*status64)(int,sqlite3_int64*,sqlite3_int64*,int);
+ int (*strlike)(const char*,const char*,unsigned int);
+ int (*db_cacheflush)(sqlite3*);
+ /* Version 3.12.0 and later */
+ int (*system_errno)(sqlite3*);
+ /* Version 3.14.0 and later */
+ int (*trace_v2)(sqlite3*,unsigned,int(*)(unsigned,void*,void*,void*),void*);
+ char *(*expanded_sql)(sqlite3_stmt*);
+ /* Version 3.18.0 and later */
+ void (*set_last_insert_rowid)(sqlite3*,sqlite3_int64);
+ /* Version 3.20.0 and later */
+ int (*prepare_v3)(sqlite3*,const char*,int,unsigned int,
+ sqlite3_stmt**,const char**);
+ int (*prepare16_v3)(sqlite3*,const void*,int,unsigned int,
+ sqlite3_stmt**,const void**);
+ int (*bind_pointer)(sqlite3_stmt*,int,void*,const char*,void(*)(void*));
+ void (*result_pointer)(sqlite3_context*,void*,const char*,void(*)(void*));
+ void *(*value_pointer)(sqlite3_value*,const char*);
+ int (*vtab_nochange)(sqlite3_context*);
+ int (*value_nochange)(sqlite3_value*);
+ const char *(*vtab_collation)(sqlite3_index_info*,int);
};
+/*
+** This is the function signature used for all extension entry points. It
+** is also defined in the file "loadext.c".
+*/
+typedef int (*sqlite3_loadext_entry)(
+ sqlite3 *db, /* Handle to the database. */
+ char **pzErrMsg, /* Used to set error string on failure. */
+ const sqlite3_api_routines *pThunk /* Extension API function pointers. */
+);
+
/*
** The following macros redefine the API routines so that they are
** redirected through the global sqlite3_api structure.
#define sqlite3_rollback_hook sqlite3_api->rollback_hook
#define sqlite3_set_authorizer sqlite3_api->set_authorizer
#define sqlite3_set_auxdata sqlite3_api->set_auxdata
-#define sqlite3_snprintf sqlite3_api->snprintf
+#define sqlite3_snprintf sqlite3_api->xsnprintf
#define sqlite3_step sqlite3_api->step
#define sqlite3_table_column_metadata sqlite3_api->table_column_metadata
#define sqlite3_thread_cleanup sqlite3_api->thread_cleanup
#define sqlite3_value_text16le sqlite3_api->value_text16le
#define sqlite3_value_type sqlite3_api->value_type
#define sqlite3_vmprintf sqlite3_api->vmprintf
-#define sqlite3_vsnprintf sqlite3_api->vsnprintf
+#define sqlite3_vsnprintf sqlite3_api->xvsnprintf
#define sqlite3_overload_function sqlite3_api->overload_function
#define sqlite3_prepare_v2 sqlite3_api->prepare_v2
#define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2
#define sqlite3_uri_boolean sqlite3_api->uri_boolean
#define sqlite3_uri_int64 sqlite3_api->uri_int64
#define sqlite3_uri_parameter sqlite3_api->uri_parameter
-#define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf
+#define sqlite3_uri_vsnprintf sqlite3_api->xvsnprintf
#define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2
/* Version 3.8.7 and later */
#define sqlite3_auto_extension sqlite3_api->auto_extension
/* Version 3.9.0 and later */
#define sqlite3_value_subtype sqlite3_api->value_subtype
#define sqlite3_result_subtype sqlite3_api->result_subtype
+/* Version 3.10.0 and later */
+#define sqlite3_status64 sqlite3_api->status64
+#define sqlite3_strlike sqlite3_api->strlike
+#define sqlite3_db_cacheflush sqlite3_api->db_cacheflush
+/* Version 3.12.0 and later */
+#define sqlite3_system_errno sqlite3_api->system_errno
+/* Version 3.14.0 and later */
+#define sqlite3_trace_v2 sqlite3_api->trace_v2
+#define sqlite3_expanded_sql sqlite3_api->expanded_sql
+/* Version 3.18.0 and later */
+#define sqlite3_set_last_insert_rowid sqlite3_api->set_last_insert_rowid
+/* Version 3.20.0 and later */
+#define sqlite3_prepare_v3 sqlite3_api->prepare_v3
+#define sqlite3_prepare16_v3 sqlite3_api->prepare16_v3
+#define sqlite3_bind_pointer sqlite3_api->bind_pointer
+#define sqlite3_result_pointer sqlite3_api->result_pointer
+#define sqlite3_value_pointer sqlite3_api->value_pointer
+/* Version 3.22.0 and later */
+#define sqlite3_vtab_nochange sqlite3_api->vtab_nochange
+#define sqlite3_value_nochange sqlite3_api->value_nochange
+#define sqlite3_vtab_collation sqlite3_api->vtab_collation
#endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */
#if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION)
# define SQLITE_EXTENSION_INIT3 /*no-op*/
#endif
-#endif /* _SQLITE3EXT_H_ */
+#endif /* SQLITE3EXT_H */
/************** End of sqlite3ext.h ******************************************/
/************** Continuing where we left off in loadext.c ********************/
/* #include "sqliteInt.h" */
-/* #include <string.h> */
#ifndef SQLITE_OMIT_LOAD_EXTENSION
-
/*
** Some API routines are omitted when various features are
** excluded from a build of SQLite. Substitute a NULL pointer
# define sqlite3_open16 0
# define sqlite3_prepare16 0
# define sqlite3_prepare16_v2 0
+# define sqlite3_prepare16_v3 0
# define sqlite3_result_error16 0
# define sqlite3_result_text16 0
# define sqlite3_result_text16be 0
# define sqlite3_enable_shared_cache 0
#endif
-#ifdef SQLITE_OMIT_TRACE
+#if defined(SQLITE_OMIT_TRACE) || defined(SQLITE_OMIT_DEPRECATED)
# define sqlite3_profile 0
# define sqlite3_trace 0
#endif
#define sqlite3_blob_reopen 0
#endif
+#if defined(SQLITE_OMIT_TRACE)
+# define sqlite3_trace_v2 0
+#endif
+
/*
** The following structure contains pointers to all SQLite API routines.
** A pointer to this structure is passed into extensions when they are
sqlite3_bind_zeroblob64,
/* Version 3.9.0 and later */
sqlite3_value_subtype,
- sqlite3_result_subtype
+ sqlite3_result_subtype,
+ /* Version 3.10.0 and later */
+ sqlite3_status64,
+ sqlite3_strlike,
+ sqlite3_db_cacheflush,
+ /* Version 3.12.0 and later */
+ sqlite3_system_errno,
+ /* Version 3.14.0 and later */
+ sqlite3_trace_v2,
+ sqlite3_expanded_sql,
+ /* Version 3.18.0 and later */
+ sqlite3_set_last_insert_rowid,
+ /* Version 3.20.0 and later */
+ sqlite3_prepare_v3,
+ sqlite3_prepare16_v3,
+ sqlite3_bind_pointer,
+ sqlite3_result_pointer,
+ sqlite3_value_pointer,
+ /* Version 3.22.0 and later */
+ sqlite3_vtab_nochange,
+ sqlite3_value_nochange,
+ sqlite3_vtab_collation
};
/*
){
sqlite3_vfs *pVfs = db->pVfs;
void *handle;
- int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*);
+ sqlite3_loadext_entry xInit;
char *zErrmsg = 0;
const char *zEntry;
char *zAltEntry = 0;
void **aHandle;
u64 nMsg = 300 + sqlite3Strlen30(zFile);
int ii;
+ int rc;
/* Shared library endings to try if zFile cannot be loaded as written */
static const char *azEndings[] = {
/* Ticket #1863. To avoid a creating security problems for older
** applications that relink against newer versions of SQLite, the
** ability to run load_extension is turned off by default. One
- ** must call sqlite3_enable_load_extension() to turn on extension
- ** loading. Otherwise you get the following error.
+ ** must call either sqlite3_enable_load_extension(db) or
+ ** sqlite3_db_config(db, SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, 1, 0)
+ ** to turn on extension loading.
*/
if( (db->flags & SQLITE_LoadExtension)==0 ){
if( pzErrMsg ){
#if SQLITE_OS_UNIX || SQLITE_OS_WIN
for(ii=0; ii<ArraySize(azEndings) && handle==0; ii++){
char *zAltFile = sqlite3_mprintf("%s.%s", zFile, azEndings[ii]);
- if( zAltFile==0 ) return SQLITE_NOMEM;
- handle = sqlite3OsDlOpen(pVfs, zAltFile);
+ int bExists = 0;
+ if( zAltFile==0 ) return SQLITE_NOMEM_BKPT;
+ sqlite3OsAccess(pVfs, zAltFile, SQLITE_ACCESS_EXISTS, &bExists);
+ if( bExists ) handle = sqlite3OsDlOpen(pVfs, zAltFile);
sqlite3_free(zAltFile);
}
#endif
}
return SQLITE_ERROR;
}
- xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*))
- sqlite3OsDlSym(pVfs, handle, zEntry);
+ xInit = (sqlite3_loadext_entry)sqlite3OsDlSym(pVfs, handle, zEntry);
/* If no entry point was specified and the default legacy
** entry point name "sqlite3_extension_init" was not found, then
zAltEntry = sqlite3_malloc64(ncFile+30);
if( zAltEntry==0 ){
sqlite3OsDlClose(pVfs, handle);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memcpy(zAltEntry, "sqlite3_", 8);
for(iFile=ncFile-1; iFile>=0 && zFile[iFile]!='/'; iFile--){}
}
memcpy(zAltEntry+iEntry, "_init", 6);
zEntry = zAltEntry;
- xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*))
- sqlite3OsDlSym(pVfs, handle, zEntry);
+ xInit = (sqlite3_loadext_entry)sqlite3OsDlSym(pVfs, handle, zEntry);
}
if( xInit==0 ){
if( pzErrMsg ){
return SQLITE_ERROR;
}
sqlite3_free(zAltEntry);
- if( xInit(db, &zErrmsg, &sqlite3Apis) ){
+ rc = xInit(db, &zErrmsg, &sqlite3Apis);
+ if( rc ){
+ if( rc==SQLITE_OK_LOAD_PERMANENTLY ) return SQLITE_OK;
if( pzErrMsg ){
*pzErrMsg = sqlite3_mprintf("error during initialization: %s", zErrmsg);
}
/* Append the new shared library handle to the db->aExtension array. */
aHandle = sqlite3DbMallocZero(db, sizeof(handle)*(db->nExtension+1));
if( aHandle==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
if( db->nExtension>0 ){
memcpy(aHandle, db->aExtension, sizeof(handle)*db->nExtension);
db->aExtension[db->nExtension++] = handle;
return SQLITE_OK;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */
** Enable or disable extension loading. Extension loading is disabled by
** default so as not to open security holes in older applications.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff){
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff){
sqlite3_mutex_enter(db->mutex);
if( onoff ){
- db->flags |= SQLITE_LoadExtension;
+ db->flags |= SQLITE_LoadExtension|SQLITE_LoadExtFunc;
}else{
- db->flags &= ~SQLITE_LoadExtension;
+ db->flags &= ~(SQLITE_LoadExtension|SQLITE_LoadExtFunc);
}
sqlite3_mutex_leave(db->mutex);
return SQLITE_OK;
}
-#endif /* SQLITE_OMIT_LOAD_EXTENSION */
-
-/*
-** The auto-extension code added regardless of whether or not extension
-** loading is supported. We need a dummy sqlite3Apis pointer for that
-** code if regular extension loading is not available. This is that
-** dummy pointer.
-*/
-#ifdef SQLITE_OMIT_LOAD_EXTENSION
-static const sqlite3_api_routines sqlite3Apis;
-#endif
-
+#endif /* !defined(SQLITE_OMIT_LOAD_EXTENSION) */
/*
** The following object holds the list of automatically loaded
** Register a statically linked extension that is automatically
** loaded by every new database connection.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xInit)(void)){
+SQLITE_API int sqlite3_auto_extension(
+ void (*xInit)(void)
+){
int rc = SQLITE_OK;
#ifndef SQLITE_OMIT_AUTOINIT
rc = sqlite3_initialize();
void (**aNew)(void);
aNew = sqlite3_realloc64(wsdAutoext.aExt, nByte);
if( aNew==0 ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}else{
wsdAutoext.aExt = aNew;
wsdAutoext.aExt[wsdAutoext.nExt] = xInit;
** Return 1 if xInit was found on the list and removed. Return 0 if xInit
** was not on the list.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xInit)(void)){
+SQLITE_API int sqlite3_cancel_auto_extension(
+ void (*xInit)(void)
+){
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
#endif
/*
** Reset the automatic extension loading mechanism.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void){
+SQLITE_API void sqlite3_reset_auto_extension(void){
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize()==SQLITE_OK )
#endif
u32 i;
int go = 1;
int rc;
- int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*);
+ sqlite3_loadext_entry xInit;
wsdAutoextInit;
if( wsdAutoext.nExt==0 ){
char *zErrmsg;
#if SQLITE_THREADSAFE
sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
+#endif
+#ifdef SQLITE_OMIT_LOAD_EXTENSION
+ const sqlite3_api_routines *pThunk = 0;
+#else
+ const sqlite3_api_routines *pThunk = &sqlite3Apis;
#endif
sqlite3_mutex_enter(mutex);
if( i>=wsdAutoext.nExt ){
xInit = 0;
go = 0;
}else{
- xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*))
- wsdAutoext.aExt[i];
+ xInit = (sqlite3_loadext_entry)wsdAutoext.aExt[i];
}
sqlite3_mutex_leave(mutex);
zErrmsg = 0;
- if( xInit && (rc = xInit(db, &zErrmsg, &sqlite3Apis))!=0 ){
+ if( xInit && (rc = xInit(db, &zErrmsg, pThunk))!=0 ){
sqlite3ErrorWithMsg(db, rc,
"automatic extension loading failed: %s", zErrmsg);
go = 0;
** ../tool/mkpragmatab.tcl. To update the set of pragmas, edit
** that script and rerun it.
*/
+
+/* The various pragma types */
#define PragTyp_HEADER_VALUE 0
#define PragTyp_AUTO_VACUUM 1
#define PragTyp_FLAG 2
#define PragTyp_BUSY_TIMEOUT 3
#define PragTyp_CACHE_SIZE 4
-#define PragTyp_CASE_SENSITIVE_LIKE 5
-#define PragTyp_COLLATION_LIST 6
-#define PragTyp_COMPILE_OPTIONS 7
-#define PragTyp_DATA_STORE_DIRECTORY 8
-#define PragTyp_DATABASE_LIST 9
-#define PragTyp_DEFAULT_CACHE_SIZE 10
-#define PragTyp_ENCODING 11
-#define PragTyp_FOREIGN_KEY_CHECK 12
-#define PragTyp_FOREIGN_KEY_LIST 13
-#define PragTyp_INCREMENTAL_VACUUM 14
-#define PragTyp_INDEX_INFO 15
-#define PragTyp_INDEX_LIST 16
-#define PragTyp_INTEGRITY_CHECK 17
-#define PragTyp_JOURNAL_MODE 18
-#define PragTyp_JOURNAL_SIZE_LIMIT 19
-#define PragTyp_LOCK_PROXY_FILE 20
-#define PragTyp_LOCKING_MODE 21
-#define PragTyp_PAGE_COUNT 22
-#define PragTyp_MMAP_SIZE 23
-#define PragTyp_PAGE_SIZE 24
-#define PragTyp_SECURE_DELETE 25
-#define PragTyp_SHRINK_MEMORY 26
-#define PragTyp_SOFT_HEAP_LIMIT 27
-#define PragTyp_STATS 28
-#define PragTyp_SYNCHRONOUS 29
-#define PragTyp_TABLE_INFO 30
-#define PragTyp_TEMP_STORE 31
-#define PragTyp_TEMP_STORE_DIRECTORY 32
-#define PragTyp_THREADS 33
-#define PragTyp_WAL_AUTOCHECKPOINT 34
-#define PragTyp_WAL_CHECKPOINT 35
-#define PragTyp_ACTIVATE_EXTENSIONS 36
-#define PragTyp_HEXKEY 37
-#define PragTyp_KEY 38
-#define PragTyp_REKEY 39
-#define PragTyp_LOCK_STATUS 40
-#define PragTyp_PARSER_TRACE 41
-#define PragFlag_NeedSchema 0x01
-#define PragFlag_ReadOnly 0x02
-static const struct sPragmaNames {
- const char *const zName; /* Name of pragma */
- u8 ePragTyp; /* PragTyp_XXX value */
- u8 mPragFlag; /* Zero or more PragFlag_XXX values */
- u32 iArg; /* Extra argument */
-} aPragmaNames[] = {
+#define PragTyp_CACHE_SPILL 5
+#define PragTyp_CASE_SENSITIVE_LIKE 6
+#define PragTyp_COLLATION_LIST 7
+#define PragTyp_COMPILE_OPTIONS 8
+#define PragTyp_DATA_STORE_DIRECTORY 9
+#define PragTyp_DATABASE_LIST 10
+#define PragTyp_DEFAULT_CACHE_SIZE 11
+#define PragTyp_ENCODING 12
+#define PragTyp_FOREIGN_KEY_CHECK 13
+#define PragTyp_FOREIGN_KEY_LIST 14
+#define PragTyp_FUNCTION_LIST 15
+#define PragTyp_INCREMENTAL_VACUUM 16
+#define PragTyp_INDEX_INFO 17
+#define PragTyp_INDEX_LIST 18
+#define PragTyp_INTEGRITY_CHECK 19
+#define PragTyp_JOURNAL_MODE 20
+#define PragTyp_JOURNAL_SIZE_LIMIT 21
+#define PragTyp_LOCK_PROXY_FILE 22
+#define PragTyp_LOCKING_MODE 23
+#define PragTyp_PAGE_COUNT 24
+#define PragTyp_MMAP_SIZE 25
+#define PragTyp_MODULE_LIST 26
+#define PragTyp_OPTIMIZE 27
+#define PragTyp_PAGE_SIZE 28
+#define PragTyp_PRAGMA_LIST 29
+#define PragTyp_SECURE_DELETE 30
+#define PragTyp_SHRINK_MEMORY 31
+#define PragTyp_SOFT_HEAP_LIMIT 32
+#define PragTyp_SYNCHRONOUS 33
+#define PragTyp_TABLE_INFO 34
+#define PragTyp_TEMP_STORE 35
+#define PragTyp_TEMP_STORE_DIRECTORY 36
+#define PragTyp_THREADS 37
+#define PragTyp_WAL_AUTOCHECKPOINT 38
+#define PragTyp_WAL_CHECKPOINT 39
+#define PragTyp_ACTIVATE_EXTENSIONS 40
+#define PragTyp_HEXKEY 41
+#define PragTyp_KEY 42
+#define PragTyp_REKEY 43
+#define PragTyp_LOCK_STATUS 44
+#define PragTyp_PARSER_TRACE 45
+#define PragTyp_STATS 46
+
+/* Property flags associated with various pragma. */
+#define PragFlg_NeedSchema 0x01 /* Force schema load before running */
+#define PragFlg_NoColumns 0x02 /* OP_ResultRow called with zero columns */
+#define PragFlg_NoColumns1 0x04 /* zero columns if RHS argument is present */
+#define PragFlg_ReadOnly 0x08 /* Read-only HEADER_VALUE */
+#define PragFlg_Result0 0x10 /* Acts as query when no argument */
+#define PragFlg_Result1 0x20 /* Acts as query when has one argument */
+#define PragFlg_SchemaOpt 0x40 /* Schema restricts name search if present */
+#define PragFlg_SchemaReq 0x80 /* Schema required - "main" is default */
+
+/* Names of columns for pragmas that return multi-column result
+** or that return single-column results where the name of the
+** result column is different from the name of the pragma
+*/
+static const char *const pragCName[] = {
+ /* 0 */ "cache_size", /* Used by: default_cache_size */
+ /* 1 */ "cid", /* Used by: table_info */
+ /* 2 */ "name",
+ /* 3 */ "type",
+ /* 4 */ "notnull",
+ /* 5 */ "dflt_value",
+ /* 6 */ "pk",
+ /* 7 */ "tbl", /* Used by: stats */
+ /* 8 */ "idx",
+ /* 9 */ "wdth",
+ /* 10 */ "hght",
+ /* 11 */ "flgs",
+ /* 12 */ "seqno", /* Used by: index_info */
+ /* 13 */ "cid",
+ /* 14 */ "name",
+ /* 15 */ "seqno", /* Used by: index_xinfo */
+ /* 16 */ "cid",
+ /* 17 */ "name",
+ /* 18 */ "desc",
+ /* 19 */ "coll",
+ /* 20 */ "key",
+ /* 21 */ "seq", /* Used by: index_list */
+ /* 22 */ "name",
+ /* 23 */ "unique",
+ /* 24 */ "origin",
+ /* 25 */ "partial",
+ /* 26 */ "seq", /* Used by: database_list */
+ /* 27 */ "name",
+ /* 28 */ "file",
+ /* 29 */ "name", /* Used by: function_list */
+ /* 30 */ "builtin",
+ /* 31 */ "name", /* Used by: module_list pragma_list */
+ /* 32 */ "seq", /* Used by: collation_list */
+ /* 33 */ "name",
+ /* 34 */ "id", /* Used by: foreign_key_list */
+ /* 35 */ "seq",
+ /* 36 */ "table",
+ /* 37 */ "from",
+ /* 38 */ "to",
+ /* 39 */ "on_update",
+ /* 40 */ "on_delete",
+ /* 41 */ "match",
+ /* 42 */ "table", /* Used by: foreign_key_check */
+ /* 43 */ "rowid",
+ /* 44 */ "parent",
+ /* 45 */ "fkid",
+ /* 46 */ "busy", /* Used by: wal_checkpoint */
+ /* 47 */ "log",
+ /* 48 */ "checkpointed",
+ /* 49 */ "timeout", /* Used by: busy_timeout */
+ /* 50 */ "database", /* Used by: lock_status */
+ /* 51 */ "status",
+};
+
+/* Definitions of all built-in pragmas */
+typedef struct PragmaName {
+ const char *const zName; /* Name of pragma */
+ u8 ePragTyp; /* PragTyp_XXX value */
+ u8 mPragFlg; /* Zero or more PragFlg_XXX values */
+ u8 iPragCName; /* Start of column names in pragCName[] */
+ u8 nPragCName; /* Num of col names. 0 means use pragma name */
+ u32 iArg; /* Extra argument */
+} PragmaName;
+static const PragmaName aPragmaName[] = {
#if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD)
- { /* zName: */ "activate_extensions",
- /* ePragTyp: */ PragTyp_ACTIVATE_EXTENSIONS,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "activate_extensions",
+ /* ePragTyp: */ PragTyp_ACTIVATE_EXTENSIONS,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
- { /* zName: */ "application_id",
- /* ePragTyp: */ PragTyp_HEADER_VALUE,
- /* ePragFlag: */ 0,
- /* iArg: */ BTREE_APPLICATION_ID },
+ {/* zName: */ "application_id",
+ /* ePragTyp: */ PragTyp_HEADER_VALUE,
+ /* ePragFlg: */ PragFlg_NoColumns1|PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ BTREE_APPLICATION_ID },
#endif
#if !defined(SQLITE_OMIT_AUTOVACUUM)
- { /* zName: */ "auto_vacuum",
- /* ePragTyp: */ PragTyp_AUTO_VACUUM,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "auto_vacuum",
+ /* ePragTyp: */ PragTyp_AUTO_VACUUM,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_AUTOMATIC_INDEX)
- { /* zName: */ "automatic_index",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_AutoIndex },
-#endif
-#endif
- { /* zName: */ "busy_timeout",
- /* ePragTyp: */ PragTyp_BUSY_TIMEOUT,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "automatic_index",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_AutoIndex },
+#endif
+#endif
+ {/* zName: */ "busy_timeout",
+ /* ePragTyp: */ PragTyp_BUSY_TIMEOUT,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 49, 1,
+ /* iArg: */ 0 },
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "cache_size",
- /* ePragTyp: */ PragTyp_CACHE_SIZE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "cache_size",
+ /* ePragTyp: */ PragTyp_CACHE_SIZE,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "cache_spill",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_CacheSpill },
-#endif
- { /* zName: */ "case_sensitive_like",
- /* ePragTyp: */ PragTyp_CASE_SENSITIVE_LIKE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "cell_size_check",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_CellSizeCk },
+ {/* zName: */ "cache_spill",
+ /* ePragTyp: */ PragTyp_CACHE_SPILL,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#endif
+ {/* zName: */ "case_sensitive_like",
+ /* ePragTyp: */ PragTyp_CASE_SENSITIVE_LIKE,
+ /* ePragFlg: */ PragFlg_NoColumns,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "cell_size_check",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_CellSizeCk },
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "checkpoint_fullfsync",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_CkptFullFSync },
+ {/* zName: */ "checkpoint_fullfsync",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_CkptFullFSync },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
- { /* zName: */ "collation_list",
- /* ePragTyp: */ PragTyp_COLLATION_LIST,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "collation_list",
+ /* ePragTyp: */ PragTyp_COLLATION_LIST,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 32, 2,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS)
- { /* zName: */ "compile_options",
- /* ePragTyp: */ PragTyp_COMPILE_OPTIONS,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "compile_options",
+ /* ePragTyp: */ PragTyp_COMPILE_OPTIONS,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "count_changes",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_CountRows },
+ {/* zName: */ "count_changes",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_CountRows },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_OS_WIN
- { /* zName: */ "data_store_directory",
- /* ePragTyp: */ PragTyp_DATA_STORE_DIRECTORY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "data_store_directory",
+ /* ePragTyp: */ PragTyp_DATA_STORE_DIRECTORY,
+ /* ePragFlg: */ PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
- { /* zName: */ "data_version",
- /* ePragTyp: */ PragTyp_HEADER_VALUE,
- /* ePragFlag: */ PragFlag_ReadOnly,
- /* iArg: */ BTREE_DATA_VERSION },
+ {/* zName: */ "data_version",
+ /* ePragTyp: */ PragTyp_HEADER_VALUE,
+ /* ePragFlg: */ PragFlg_ReadOnly|PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ BTREE_DATA_VERSION },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
- { /* zName: */ "database_list",
- /* ePragTyp: */ PragTyp_DATABASE_LIST,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "database_list",
+ /* ePragTyp: */ PragTyp_DATABASE_LIST,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0,
+ /* ColNames: */ 26, 3,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED)
- { /* zName: */ "default_cache_size",
- /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "default_cache_size",
+ /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 1,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
- { /* zName: */ "defer_foreign_keys",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_DeferFKs },
+ {/* zName: */ "defer_foreign_keys",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_DeferFKs },
#endif
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "empty_result_callbacks",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_NullCallback },
+ {/* zName: */ "empty_result_callbacks",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_NullCallback },
#endif
#if !defined(SQLITE_OMIT_UTF16)
- { /* zName: */ "encoding",
- /* ePragTyp: */ PragTyp_ENCODING,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "encoding",
+ /* ePragTyp: */ PragTyp_ENCODING,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
- { /* zName: */ "foreign_key_check",
- /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "foreign_key_check",
+ /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0,
+ /* ColNames: */ 42, 4,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FOREIGN_KEY)
- { /* zName: */ "foreign_key_list",
- /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "foreign_key_list",
+ /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
+ /* ColNames: */ 34, 8,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
- { /* zName: */ "foreign_keys",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_ForeignKeys },
+ {/* zName: */ "foreign_keys",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_ForeignKeys },
#endif
#endif
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
- { /* zName: */ "freelist_count",
- /* ePragTyp: */ PragTyp_HEADER_VALUE,
- /* ePragFlag: */ PragFlag_ReadOnly,
- /* iArg: */ BTREE_FREE_PAGE_COUNT },
+ {/* zName: */ "freelist_count",
+ /* ePragTyp: */ PragTyp_HEADER_VALUE,
+ /* ePragFlg: */ PragFlg_ReadOnly|PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ BTREE_FREE_PAGE_COUNT },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "full_column_names",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_FullColNames },
- { /* zName: */ "fullfsync",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_FullFSync },
+ {/* zName: */ "full_column_names",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_FullColNames },
+ {/* zName: */ "fullfsync",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_FullFSync },
+#endif
+#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
+#if defined(SQLITE_INTROSPECTION_PRAGMAS)
+ {/* zName: */ "function_list",
+ /* ePragTyp: */ PragTyp_FUNCTION_LIST,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 29, 2,
+ /* iArg: */ 0 },
+#endif
#endif
#if defined(SQLITE_HAS_CODEC)
- { /* zName: */ "hexkey",
- /* ePragTyp: */ PragTyp_HEXKEY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "hexrekey",
- /* ePragTyp: */ PragTyp_HEXKEY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "hexkey",
+ /* ePragTyp: */ PragTyp_HEXKEY,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "hexrekey",
+ /* ePragTyp: */ PragTyp_HEXKEY,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if !defined(SQLITE_OMIT_CHECK)
- { /* zName: */ "ignore_check_constraints",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_IgnoreChecks },
+ {/* zName: */ "ignore_check_constraints",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_IgnoreChecks },
#endif
#endif
#if !defined(SQLITE_OMIT_AUTOVACUUM)
- { /* zName: */ "incremental_vacuum",
- /* ePragTyp: */ PragTyp_INCREMENTAL_VACUUM,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "incremental_vacuum",
+ /* ePragTyp: */ PragTyp_INCREMENTAL_VACUUM,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_NoColumns,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
- { /* zName: */ "index_info",
- /* ePragTyp: */ PragTyp_INDEX_INFO,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
- { /* zName: */ "index_list",
- /* ePragTyp: */ PragTyp_INDEX_LIST,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
- { /* zName: */ "index_xinfo",
- /* ePragTyp: */ PragTyp_INDEX_INFO,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 1 },
+ {/* zName: */ "index_info",
+ /* ePragTyp: */ PragTyp_INDEX_INFO,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
+ /* ColNames: */ 12, 3,
+ /* iArg: */ 0 },
+ {/* zName: */ "index_list",
+ /* ePragTyp: */ PragTyp_INDEX_LIST,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
+ /* ColNames: */ 21, 5,
+ /* iArg: */ 0 },
+ {/* zName: */ "index_xinfo",
+ /* ePragTyp: */ PragTyp_INDEX_INFO,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
+ /* ColNames: */ 15, 6,
+ /* iArg: */ 1 },
#endif
#if !defined(SQLITE_OMIT_INTEGRITY_CHECK)
- { /* zName: */ "integrity_check",
- /* ePragTyp: */ PragTyp_INTEGRITY_CHECK,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "integrity_check",
+ /* ePragTyp: */ PragTyp_INTEGRITY_CHECK,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_Result1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "journal_mode",
- /* ePragTyp: */ PragTyp_JOURNAL_MODE,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
- { /* zName: */ "journal_size_limit",
- /* ePragTyp: */ PragTyp_JOURNAL_SIZE_LIMIT,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "journal_mode",
+ /* ePragTyp: */ PragTyp_JOURNAL_MODE,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "journal_size_limit",
+ /* ePragTyp: */ PragTyp_JOURNAL_SIZE_LIMIT,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if defined(SQLITE_HAS_CODEC)
- { /* zName: */ "key",
- /* ePragTyp: */ PragTyp_KEY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "key",
+ /* ePragTyp: */ PragTyp_KEY,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "legacy_file_format",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_LegacyFileFmt },
+ {/* zName: */ "legacy_file_format",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_LegacyFileFmt },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && SQLITE_ENABLE_LOCKING_STYLE
- { /* zName: */ "lock_proxy_file",
- /* ePragTyp: */ PragTyp_LOCK_PROXY_FILE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "lock_proxy_file",
+ /* ePragTyp: */ PragTyp_LOCK_PROXY_FILE,
+ /* ePragFlg: */ PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- { /* zName: */ "lock_status",
- /* ePragTyp: */ PragTyp_LOCK_STATUS,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "lock_status",
+ /* ePragTyp: */ PragTyp_LOCK_STATUS,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 50, 2,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "locking_mode",
- /* ePragTyp: */ PragTyp_LOCKING_MODE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "max_page_count",
- /* ePragTyp: */ PragTyp_PAGE_COUNT,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
- { /* zName: */ "mmap_size",
- /* ePragTyp: */ PragTyp_MMAP_SIZE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "page_count",
- /* ePragTyp: */ PragTyp_PAGE_COUNT,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
- { /* zName: */ "page_size",
- /* ePragTyp: */ PragTyp_PAGE_SIZE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "locking_mode",
+ /* ePragTyp: */ PragTyp_LOCKING_MODE,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "max_page_count",
+ /* ePragTyp: */ PragTyp_PAGE_COUNT,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "mmap_size",
+ /* ePragTyp: */ PragTyp_MMAP_SIZE,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#endif
+#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
+#if !defined(SQLITE_OMIT_VIRTUALTABLE)
+#if defined(SQLITE_INTROSPECTION_PRAGMAS)
+ {/* zName: */ "module_list",
+ /* ePragTyp: */ PragTyp_MODULE_LIST,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 31, 1,
+ /* iArg: */ 0 },
#endif
-#if defined(SQLITE_DEBUG)
- { /* zName: */ "parser_trace",
- /* ePragTyp: */ PragTyp_PARSER_TRACE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+#endif
+#endif
+ {/* zName: */ "optimize",
+ /* ePragTyp: */ PragTyp_OPTIMIZE,
+ /* ePragFlg: */ PragFlg_Result1|PragFlg_NeedSchema,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
+ {/* zName: */ "page_count",
+ /* ePragTyp: */ PragTyp_PAGE_COUNT,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "page_size",
+ /* ePragTyp: */ PragTyp_PAGE_SIZE,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#endif
+#if defined(SQLITE_DEBUG) && !defined(SQLITE_OMIT_PARSER_TRACE)
+ {/* zName: */ "parser_trace",
+ /* ePragTyp: */ PragTyp_PARSER_TRACE,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#endif
+#if defined(SQLITE_INTROSPECTION_PRAGMAS)
+ {/* zName: */ "pragma_list",
+ /* ePragTyp: */ PragTyp_PRAGMA_LIST,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 31, 1,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "query_only",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_QueryOnly },
+ {/* zName: */ "query_only",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_QueryOnly },
#endif
#if !defined(SQLITE_OMIT_INTEGRITY_CHECK)
- { /* zName: */ "quick_check",
- /* ePragTyp: */ PragTyp_INTEGRITY_CHECK,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "quick_check",
+ /* ePragTyp: */ PragTyp_INTEGRITY_CHECK,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_Result1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "read_uncommitted",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_ReadUncommitted },
- { /* zName: */ "recursive_triggers",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_RecTriggers },
+ {/* zName: */ "read_uncommitted",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_ReadUncommit },
+ {/* zName: */ "recursive_triggers",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_RecTriggers },
#endif
#if defined(SQLITE_HAS_CODEC)
- { /* zName: */ "rekey",
- /* ePragTyp: */ PragTyp_REKEY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "rekey",
+ /* ePragTyp: */ PragTyp_REKEY,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "reverse_unordered_selects",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_ReverseOrder },
+ {/* zName: */ "reverse_unordered_selects",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_ReverseOrder },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
- { /* zName: */ "schema_version",
- /* ePragTyp: */ PragTyp_HEADER_VALUE,
- /* ePragFlag: */ 0,
- /* iArg: */ BTREE_SCHEMA_VERSION },
+ {/* zName: */ "schema_version",
+ /* ePragTyp: */ PragTyp_HEADER_VALUE,
+ /* ePragFlg: */ PragFlg_NoColumns1|PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ BTREE_SCHEMA_VERSION },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "secure_delete",
- /* ePragTyp: */ PragTyp_SECURE_DELETE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "secure_delete",
+ /* ePragTyp: */ PragTyp_SECURE_DELETE,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "short_column_names",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_ShortColNames },
-#endif
- { /* zName: */ "shrink_memory",
- /* ePragTyp: */ PragTyp_SHRINK_MEMORY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "soft_heap_limit",
- /* ePragTyp: */ PragTyp_SOFT_HEAP_LIMIT,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "short_column_names",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_ShortColNames },
+#endif
+ {/* zName: */ "shrink_memory",
+ /* ePragTyp: */ PragTyp_SHRINK_MEMORY,
+ /* ePragFlg: */ PragFlg_NoColumns,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "soft_heap_limit",
+ /* ePragTyp: */ PragTyp_SOFT_HEAP_LIMIT,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if defined(SQLITE_DEBUG)
- { /* zName: */ "sql_trace",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_SqlTrace },
+ {/* zName: */ "sql_trace",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_SqlTrace },
#endif
#endif
-#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
- { /* zName: */ "stats",
- /* ePragTyp: */ PragTyp_STATS,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) && defined(SQLITE_DEBUG)
+ {/* zName: */ "stats",
+ /* ePragTyp: */ PragTyp_STATS,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq,
+ /* ColNames: */ 7, 5,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "synchronous",
- /* ePragTyp: */ PragTyp_SYNCHRONOUS,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "synchronous",
+ /* ePragTyp: */ PragTyp_SYNCHRONOUS,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS)
- { /* zName: */ "table_info",
- /* ePragTyp: */ PragTyp_TABLE_INFO,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "table_info",
+ /* ePragTyp: */ PragTyp_TABLE_INFO,
+ /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt,
+ /* ColNames: */ 1, 6,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
- { /* zName: */ "temp_store",
- /* ePragTyp: */ PragTyp_TEMP_STORE,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "temp_store_directory",
- /* ePragTyp: */ PragTyp_TEMP_STORE_DIRECTORY,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
-#endif
- { /* zName: */ "threads",
- /* ePragTyp: */ PragTyp_THREADS,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
+ {/* zName: */ "temp_store",
+ /* ePragTyp: */ PragTyp_TEMP_STORE,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "temp_store_directory",
+ /* ePragTyp: */ PragTyp_TEMP_STORE_DIRECTORY,
+ /* ePragFlg: */ PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+#endif
+ {/* zName: */ "threads",
+ /* ePragTyp: */ PragTyp_THREADS,
+ /* ePragFlg: */ PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
#if !defined(SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS)
- { /* zName: */ "user_version",
- /* ePragTyp: */ PragTyp_HEADER_VALUE,
- /* ePragFlag: */ 0,
- /* iArg: */ BTREE_USER_VERSION },
+ {/* zName: */ "user_version",
+ /* ePragTyp: */ PragTyp_HEADER_VALUE,
+ /* ePragFlg: */ PragFlg_NoColumns1|PragFlg_Result0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ BTREE_USER_VERSION },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
#if defined(SQLITE_DEBUG)
- { /* zName: */ "vdbe_addoptrace",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_VdbeAddopTrace },
- { /* zName: */ "vdbe_debug",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_SqlTrace|SQLITE_VdbeListing|SQLITE_VdbeTrace },
- { /* zName: */ "vdbe_eqp",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_VdbeEQP },
- { /* zName: */ "vdbe_listing",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_VdbeListing },
- { /* zName: */ "vdbe_trace",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_VdbeTrace },
+ {/* zName: */ "vdbe_addoptrace",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_VdbeAddopTrace },
+ {/* zName: */ "vdbe_debug",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_SqlTrace|SQLITE_VdbeListing|SQLITE_VdbeTrace },
+ {/* zName: */ "vdbe_eqp",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_VdbeEQP },
+ {/* zName: */ "vdbe_listing",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_VdbeListing },
+ {/* zName: */ "vdbe_trace",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_VdbeTrace },
#endif
#endif
#if !defined(SQLITE_OMIT_WAL)
- { /* zName: */ "wal_autocheckpoint",
- /* ePragTyp: */ PragTyp_WAL_AUTOCHECKPOINT,
- /* ePragFlag: */ 0,
- /* iArg: */ 0 },
- { /* zName: */ "wal_checkpoint",
- /* ePragTyp: */ PragTyp_WAL_CHECKPOINT,
- /* ePragFlag: */ PragFlag_NeedSchema,
- /* iArg: */ 0 },
+ {/* zName: */ "wal_autocheckpoint",
+ /* ePragTyp: */ PragTyp_WAL_AUTOCHECKPOINT,
+ /* ePragFlg: */ 0,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ 0 },
+ {/* zName: */ "wal_checkpoint",
+ /* ePragTyp: */ PragTyp_WAL_CHECKPOINT,
+ /* ePragFlg: */ PragFlg_NeedSchema,
+ /* ColNames: */ 46, 3,
+ /* iArg: */ 0 },
#endif
#if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
- { /* zName: */ "writable_schema",
- /* ePragTyp: */ PragTyp_FLAG,
- /* ePragFlag: */ 0,
- /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode },
+ {/* zName: */ "writable_schema",
+ /* ePragTyp: */ PragTyp_FLAG,
+ /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1,
+ /* ColNames: */ 0, 0,
+ /* iArg: */ SQLITE_WriteSchema },
#endif
};
-/* Number of pragmas: 60 on by default, 73 total. */
+/* Number of pragmas: 60 on by default, 77 total. */
/************** End of pragma.h **********************************************/
/************** Continuing where we left off in pragma.c *********************/
/*
** Interpret the given string as a safety level. Return 0 for OFF,
-** 1 for ON or NORMAL and 2 for FULL. Return 1 for an empty or
-** unrecognized string argument. The FULL option is disallowed
+** 1 for ON or NORMAL, 2 for FULL, and 3 for EXTRA. Return 1 for an empty or
+** unrecognized string argument. The FULL and EXTRA option is disallowed
** if the omitFull parameter it 1.
**
** Note that the values returned are one less that the values that
** and older scripts may have used numbers 0 for OFF and 1 for ON.
*/
static u8 getSafetyLevel(const char *z, int omitFull, u8 dflt){
- /* 123456789 123456789 */
- static const char zText[] = "onoffalseyestruefull";
- static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16};
- static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 4};
- static const u8 iValue[] = {1, 0, 0, 0, 1, 1, 2};
+ /* 123456789 123456789 123 */
+ static const char zText[] = "onoffalseyestruextrafull";
+ static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 15, 20};
+ static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 5, 4};
+ static const u8 iValue[] = {1, 0, 0, 0, 1, 1, 3, 2};
+ /* on no off false yes true extra full */
int i, n;
if( sqlite3Isdigit(*z) ){
return (u8)sqlite3Atoi(z);
}
n = sqlite3Strlen30(z);
- for(i=0; i<ArraySize(iLength)-omitFull; i++){
- if( iLength[i]==n && sqlite3StrNICmp(&zText[iOffset[i]],z,n)==0 ){
+ for(i=0; i<ArraySize(iLength); i++){
+ if( iLength[i]==n && sqlite3StrNICmp(&zText[iOffset[i]],z,n)==0
+ && (!omitFull || iValue[i]<=1)
+ ){
return iValue[i];
}
}
#endif /* SQLITE_PAGER_PRAGMAS */
/*
-** Set the names of the first N columns to the values in azCol[]
+** Set result column names for a pragma.
*/
-static void setAllColumnNames(
- Vdbe *v, /* The query under construction */
- int N, /* Number of columns */
- const char **azCol /* Names of columns */
+static void setPragmaResultColumnNames(
+ Vdbe *v, /* The query under construction */
+ const PragmaName *pPragma /* The pragma */
){
- int i;
- sqlite3VdbeSetNumCols(v, N);
- for(i=0; i<N; i++){
- sqlite3VdbeSetColName(v, i, COLNAME_NAME, azCol[i], SQLITE_STATIC);
+ u8 n = pPragma->nPragCName;
+ sqlite3VdbeSetNumCols(v, n==0 ? 1 : n);
+ if( n==0 ){
+ sqlite3VdbeSetColName(v, 0, COLNAME_NAME, pPragma->zName, SQLITE_STATIC);
+ }else{
+ int i, j;
+ for(i=0, j=pPragma->iPragCName; i<n; i++, j++){
+ sqlite3VdbeSetColName(v, i, COLNAME_NAME, pragCName[j], SQLITE_STATIC);
+ }
}
}
-static void setOneColumnName(Vdbe *v, const char *z){
- setAllColumnNames(v, 1, &z);
-}
/*
** Generate code to return a single integer value.
*/
-static void returnSingleInt(Vdbe *v, const char *zLabel, i64 value){
+static void returnSingleInt(Vdbe *v, i64 value){
sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, 1, 0, (const u8*)&value, P4_INT64);
- setOneColumnName(v, zLabel);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}
*/
static void returnSingleText(
Vdbe *v, /* Prepared statement under construction */
- const char *zLabel, /* Name of the result column */
const char *zValue /* Value to be returned */
){
if( zValue ){
sqlite3VdbeLoadString(v, 1, (const char*)zValue);
- setOneColumnName(v, zLabel);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}
}
return azModeName[eMode];
}
+/*
+** Locate a pragma in the aPragmaName[] array.
+*/
+static const PragmaName *pragmaLocate(const char *zName){
+ int upr, lwr, mid = 0, rc;
+ lwr = 0;
+ upr = ArraySize(aPragmaName)-1;
+ while( lwr<=upr ){
+ mid = (lwr+upr)/2;
+ rc = sqlite3_stricmp(zName, aPragmaName[mid].zName);
+ if( rc==0 ) break;
+ if( rc<0 ){
+ upr = mid - 1;
+ }else{
+ lwr = mid + 1;
+ }
+ }
+ return lwr>upr ? 0 : &aPragmaName[mid];
+}
+
+/*
+** Helper subroutine for PRAGMA integrity_check:
+**
+** Generate code to output a single-column result row with a value of the
+** string held in register 3. Decrement the result count in register 1
+** and halt if the maximum number of result rows have been issued.
+*/
+static int integrityCheckResultRow(Vdbe *v){
+ int addr;
+ sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1);
+ addr = sqlite3VdbeAddOp3(v, OP_IfPos, 1, sqlite3VdbeCurrentAddr(v)+2, 1);
+ VdbeCoverage(v);
+ sqlite3VdbeAddOp0(v, OP_Halt);
+ return addr;
+}
+
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
-** PRAGMA [database.]id [= value]
+** PRAGMA [schema.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
*/
SQLITE_PRIVATE void sqlite3Pragma(
Parse *pParse,
- Token *pId1, /* First part of [database.]id field */
- Token *pId2, /* Second part of [database.]id field, or NULL */
+ Token *pId1, /* First part of [schema.]id field */
+ Token *pId2, /* Second part of [schema.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
Token *pId; /* Pointer to <id> token */
char *aFcntl[4]; /* Argument to SQLITE_FCNTL_PRAGMA */
int iDb; /* Database index for <database> */
- int lwr, upr, mid = 0; /* Binary search bounds */
int rc; /* return value form SQLITE_FCNTL_PRAGMA */
sqlite3 *db = pParse->db; /* The database connection */
Db *pDb; /* The specific database being pragmaed */
Vdbe *v = sqlite3GetVdbe(pParse); /* Prepared statement */
- const struct sPragmaNames *pPragma;
+ const PragmaName *pPragma; /* The pragma */
if( v==0 ) return;
sqlite3VdbeRunOnlyOnce(v);
pParse->nMem = 2;
- /* Interpret the [database.] part of the pragma statement. iDb is the
+ /* Interpret the [schema.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
}
assert( pId2 );
- zDb = pId2->n>0 ? pDb->zName : 0;
+ zDb = pId2->n>0 ? pDb->zDbSName : 0;
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
db->busyHandler.nBusy = 0;
rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl);
if( rc==SQLITE_OK ){
- returnSingleText(v, "result", aFcntl[0]);
+ sqlite3VdbeSetNumCols(v, 1);
+ sqlite3VdbeSetColName(v, 0, COLNAME_NAME, aFcntl[0], SQLITE_TRANSIENT);
+ returnSingleText(v, aFcntl[0]);
sqlite3_free(aFcntl[0]);
goto pragma_out;
}
}
/* Locate the pragma in the lookup table */
- lwr = 0;
- upr = ArraySize(aPragmaNames)-1;
- while( lwr<=upr ){
- mid = (lwr+upr)/2;
- rc = sqlite3_stricmp(zLeft, aPragmaNames[mid].zName);
- if( rc==0 ) break;
- if( rc<0 ){
- upr = mid - 1;
- }else{
- lwr = mid + 1;
- }
- }
- if( lwr>upr ) goto pragma_out;
- pPragma = &aPragmaNames[mid];
+ pPragma = pragmaLocate(zLeft);
+ if( pPragma==0 ) goto pragma_out;
/* Make sure the database schema is loaded if the pragma requires that */
- if( (pPragma->mPragFlag & PragFlag_NeedSchema)!=0 ){
+ if( (pPragma->mPragFlg & PragFlg_NeedSchema)!=0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
}
+ /* Register the result column names for pragmas that return results */
+ if( (pPragma->mPragFlg & PragFlg_NoColumns)==0
+ && ((pPragma->mPragFlg & PragFlg_NoColumns1)==0 || zRight==0)
+ ){
+ setPragmaResultColumnNames(v, pPragma);
+ }
+
/* Jump to the appropriate pragma handler */
switch( pPragma->ePragTyp ){
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED)
/*
- ** PRAGMA [database.]default_cache_size
- ** PRAGMA [database.]default_cache_size=N
+ ** PRAGMA [schema.]default_cache_size
+ ** PRAGMA [schema.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
{ OP_Noop, 0, 0, 0},
{ OP_ResultRow, 1, 1, 0},
};
- int addr;
+ VdbeOp *aOp;
sqlite3VdbeUsesBtree(v, iDb);
if( !zRight ){
- setOneColumnName(v, "cache_size");
pParse->nMem += 2;
- addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize,iLn);
- sqlite3VdbeChangeP1(v, addr, iDb);
- sqlite3VdbeChangeP1(v, addr+1, iDb);
- sqlite3VdbeChangeP1(v, addr+6, SQLITE_DEFAULT_CACHE_SIZE);
+ sqlite3VdbeVerifyNoMallocRequired(v, ArraySize(getCacheSize));
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize, iLn);
+ if( ONLY_IF_REALLOC_STRESS(aOp==0) ) break;
+ aOp[0].p1 = iDb;
+ aOp[1].p1 = iDb;
+ aOp[6].p1 = SQLITE_DEFAULT_CACHE_SIZE;
}else{
int size = sqlite3AbsInt32(sqlite3Atoi(zRight));
sqlite3BeginWriteOperation(pParse, 0, iDb);
- sqlite3VdbeAddOp2(v, OP_Integer, size, 1);
- sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, 1);
+ sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_DEFAULT_CACHE_SIZE, size);
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
/*
- ** PRAGMA [database.]page_size
- ** PRAGMA [database.]page_size=N
+ ** PRAGMA [schema.]page_size
+ ** PRAGMA [schema.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
assert( pBt!=0 );
if( !zRight ){
int size = ALWAYS(pBt) ? sqlite3BtreeGetPageSize(pBt) : 0;
- returnSingleInt(v, "page_size", size);
+ returnSingleInt(v, size);
}else{
/* Malloc may fail when setting the page-size, as there is an internal
** buffer that the pager module resizes using sqlite3_realloc().
*/
db->nextPagesize = sqlite3Atoi(zRight);
if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize,-1,0) ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
}
break;
}
/*
- ** PRAGMA [database.]secure_delete
- ** PRAGMA [database.]secure_delete=ON/OFF
+ ** PRAGMA [schema.]secure_delete
+ ** PRAGMA [schema.]secure_delete=ON/OFF/FAST
**
** The first form reports the current setting for the
** secure_delete flag. The second form changes the secure_delete
- ** flag setting and reports thenew value.
+ ** flag setting and reports the new value.
*/
case PragTyp_SECURE_DELETE: {
Btree *pBt = pDb->pBt;
int b = -1;
assert( pBt!=0 );
if( zRight ){
- b = sqlite3GetBoolean(zRight, 0);
+ if( sqlite3_stricmp(zRight, "fast")==0 ){
+ b = 2;
+ }else{
+ b = sqlite3GetBoolean(zRight, 0);
+ }
}
if( pId2->n==0 && b>=0 ){
int ii;
}
}
b = sqlite3BtreeSecureDelete(pBt, b);
- returnSingleInt(v, "secure_delete", b);
+ returnSingleInt(v, b);
break;
}
/*
- ** PRAGMA [database.]max_page_count
- ** PRAGMA [database.]max_page_count=N
+ ** PRAGMA [schema.]max_page_count
+ ** PRAGMA [schema.]max_page_count=N
**
** The first form reports the current setting for the
** maximum number of pages in the database file. The
** change. The only purpose is to provide an easy way to test
** the sqlite3AbsInt32() function.
**
- ** PRAGMA [database.]page_count
+ ** PRAGMA [schema.]page_count
**
** Return the number of pages in the specified database.
*/
sqlite3AbsInt32(sqlite3Atoi(zRight)));
}
sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1);
- sqlite3VdbeSetNumCols(v, 1);
- sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT);
break;
}
/*
- ** PRAGMA [database.]locking_mode
- ** PRAGMA [database.]locking_mode = (normal|exclusive)
+ ** PRAGMA [schema.]locking_mode
+ ** PRAGMA [schema.]locking_mode = (normal|exclusive)
*/
case PragTyp_LOCKING_MODE: {
const char *zRet = "normal";
if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){
zRet = "exclusive";
}
- returnSingleText(v, "locking_mode", zRet);
+ returnSingleText(v, zRet);
break;
}
/*
- ** PRAGMA [database.]journal_mode
- ** PRAGMA [database.]journal_mode =
+ ** PRAGMA [schema.]journal_mode
+ ** PRAGMA [schema.]journal_mode =
** (delete|persist|off|truncate|memory|wal|off)
*/
case PragTyp_JOURNAL_MODE: {
int eMode; /* One of the PAGER_JOURNALMODE_XXX symbols */
int ii; /* Loop counter */
- setOneColumnName(v, "journal_mode");
if( zRight==0 ){
/* If there is no "=MODE" part of the pragma, do a query for the
** current mode */
}
/*
- ** PRAGMA [database.]journal_size_limit
- ** PRAGMA [database.]journal_size_limit=N
+ ** PRAGMA [schema.]journal_size_limit
+ ** PRAGMA [schema.]journal_size_limit=N
**
** Get or set the size limit on rollback journal files.
*/
if( iLimit<-1 ) iLimit = -1;
}
iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit);
- returnSingleInt(v, "journal_size_limit", iLimit);
+ returnSingleInt(v, iLimit);
break;
}
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
- ** PRAGMA [database.]auto_vacuum
- ** PRAGMA [database.]auto_vacuum=N
+ ** PRAGMA [schema.]auto_vacuum
+ ** PRAGMA [schema.]auto_vacuum=N
**
** Get or set the value of the database 'auto-vacuum' parameter.
** The value is one of: 0 NONE 1 FULL 2 INCREMENTAL
Btree *pBt = pDb->pBt;
assert( pBt!=0 );
if( !zRight ){
- returnSingleInt(v, "auto_vacuum", sqlite3BtreeGetAutoVacuum(pBt));
+ returnSingleInt(v, sqlite3BtreeGetAutoVacuum(pBt));
}else{
int eAuto = getAutoVacuum(zRight);
assert( eAuto>=0 && eAuto<=2 );
{ OP_ReadCookie, 0, 1, BTREE_LARGEST_ROOT_PAGE},
{ OP_If, 1, 0, 0}, /* 2 */
{ OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */
- { OP_Integer, 0, 1, 0}, /* 4 */
- { OP_SetCookie, 0, BTREE_INCR_VACUUM, 1}, /* 5 */
+ { OP_SetCookie, 0, BTREE_INCR_VACUUM, 0}, /* 4 */
};
- int iAddr;
- iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6, iLn);
- sqlite3VdbeChangeP1(v, iAddr, iDb);
- sqlite3VdbeChangeP1(v, iAddr+1, iDb);
- sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4);
- sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1);
- sqlite3VdbeChangeP1(v, iAddr+5, iDb);
+ VdbeOp *aOp;
+ int iAddr = sqlite3VdbeCurrentAddr(v);
+ sqlite3VdbeVerifyNoMallocRequired(v, ArraySize(setMeta6));
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6, iLn);
+ if( ONLY_IF_REALLOC_STRESS(aOp==0) ) break;
+ aOp[0].p1 = iDb;
+ aOp[1].p1 = iDb;
+ aOp[2].p2 = iAddr+4;
+ aOp[4].p1 = iDb;
+ aOp[4].p3 = eAuto - 1;
sqlite3VdbeUsesBtree(v, iDb);
}
}
#endif
/*
- ** PRAGMA [database.]incremental_vacuum(N)
+ ** PRAGMA [schema.]incremental_vacuum(N)
**
** Do N steps of incremental vacuuming on a database.
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
- ** PRAGMA [database.]cache_size
- ** PRAGMA [database.]cache_size=N
+ ** PRAGMA [schema.]cache_size
+ ** PRAGMA [schema.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The second form sets the local
case PragTyp_CACHE_SIZE: {
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
if( !zRight ){
- if( sqlite3ReadSchema(pParse) ) goto pragma_out;
- returnSingleInt(v, "cache_size", pDb->pSchema->cache_size);
+ returnSingleInt(v, pDb->pSchema->cache_size);
}else{
int size = sqlite3Atoi(zRight);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
- if( sqlite3ReadSchema(pParse) ) goto pragma_out;
}
break;
}
/*
- ** PRAGMA [database.]mmap_size(N)
+ ** PRAGMA [schema.]cache_spill
+ ** PRAGMA cache_spill=BOOLEAN
+ ** PRAGMA [schema.]cache_spill=N
+ **
+ ** The first form reports the current local setting for the
+ ** page cache spill size. The second form turns cache spill on
+ ** or off. When turnning cache spill on, the size is set to the
+ ** current cache_size. The third form sets a spill size that
+ ** may be different form the cache size.
+ ** If N is positive then that is the
+ ** number of pages in the cache. If N is negative, then the
+ ** number of pages is adjusted so that the cache uses -N kibibytes
+ ** of memory.
+ **
+ ** If the number of cache_spill pages is less then the number of
+ ** cache_size pages, no spilling occurs until the page count exceeds
+ ** the number of cache_size pages.
+ **
+ ** The cache_spill=BOOLEAN setting applies to all attached schemas,
+ ** not just the schema specified.
+ */
+ case PragTyp_CACHE_SPILL: {
+ assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+ if( !zRight ){
+ returnSingleInt(v,
+ (db->flags & SQLITE_CacheSpill)==0 ? 0 :
+ sqlite3BtreeSetSpillSize(pDb->pBt,0));
+ }else{
+ int size = 1;
+ if( sqlite3GetInt32(zRight, &size) ){
+ sqlite3BtreeSetSpillSize(pDb->pBt, size);
+ }
+ if( sqlite3GetBoolean(zRight, size!=0) ){
+ db->flags |= SQLITE_CacheSpill;
+ }else{
+ db->flags &= ~SQLITE_CacheSpill;
+ }
+ setAllPagerFlags(db);
+ }
+ break;
+ }
+
+ /*
+ ** PRAGMA [schema.]mmap_size(N)
**
** Used to set mapping size limit. The mapping size limit is
** used to limit the aggregate size of all memory mapped regions of the
rc = SQLITE_OK;
#endif
if( rc==SQLITE_OK ){
- returnSingleInt(v, "mmap_size", sz);
+ returnSingleInt(v, sz);
}else if( rc!=SQLITE_NOTFOUND ){
pParse->nErr++;
pParse->rc = rc;
*/
case PragTyp_TEMP_STORE: {
if( !zRight ){
- returnSingleInt(v, "temp_store", db->temp_store);
+ returnSingleInt(v, db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
*/
case PragTyp_TEMP_STORE_DIRECTORY: {
if( !zRight ){
- returnSingleText(v, "temp_store_directory", sqlite3_temp_directory);
+ returnSingleText(v, sqlite3_temp_directory);
}else{
#ifndef SQLITE_OMIT_WSD
if( zRight[0] ){
*/
case PragTyp_DATA_STORE_DIRECTORY: {
if( !zRight ){
- returnSingleText(v, "data_store_directory", sqlite3_data_directory);
+ returnSingleText(v, sqlite3_data_directory);
}else{
#ifndef SQLITE_OMIT_WSD
if( zRight[0] ){
#if SQLITE_ENABLE_LOCKING_STYLE
/*
- ** PRAGMA [database.]lock_proxy_file
- ** PRAGMA [database.]lock_proxy_file = ":auto:"|"lock_file_path"
+ ** PRAGMA [schema.]lock_proxy_file
+ ** PRAGMA [schema.]lock_proxy_file = ":auto:"|"lock_file_path"
**
** Return or set the value of the lock_proxy_file flag. Changing
** the value sets a specific file to be used for database access locks.
sqlite3_file *pFile = sqlite3PagerFile(pPager);
sqlite3OsFileControlHint(pFile, SQLITE_GET_LOCKPROXYFILE,
&proxy_file_path);
- returnSingleText(v, "lock_proxy_file", proxy_file_path);
+ returnSingleText(v, proxy_file_path);
}else{
Pager *pPager = sqlite3BtreePager(pDb->pBt);
sqlite3_file *pFile = sqlite3PagerFile(pPager);
#endif /* SQLITE_ENABLE_LOCKING_STYLE */
/*
- ** PRAGMA [database.]synchronous
- ** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
+ ** PRAGMA [schema.]synchronous
+ ** PRAGMA [schema.]synchronous=OFF|ON|NORMAL|FULL|EXTRA
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
*/
case PragTyp_SYNCHRONOUS: {
if( !zRight ){
- returnSingleInt(v, "synchronous", pDb->safety_level-1);
+ returnSingleInt(v, pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
- }else{
+ }else if( iDb!=1 ){
int iLevel = (getSafetyLevel(zRight,0,1)+1) & PAGER_SYNCHRONOUS_MASK;
if( iLevel==0 ) iLevel = 1;
pDb->safety_level = iLevel;
+ pDb->bSyncSet = 1;
setAllPagerFlags(db);
}
}
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
case PragTyp_FLAG: {
if( zRight==0 ){
- returnSingleInt(v, pPragma->zName, (db->flags & pPragma->iArg)!=0 );
+ setPragmaResultColumnNames(v, pPragma);
+ returnSingleInt(v, (db->flags & pPragma->iArg)!=0 );
}else{
int mask = pPragma->iArg; /* Mask of bits to set or clear. */
if( db->autoCommit==0 ){
** compiler (eg. count_changes). So add an opcode to expire all
** compiled SQL statements after modifying a pragma value.
*/
- sqlite3VdbeAddOp2(v, OP_Expire, 0, 0);
+ sqlite3VdbeAddOp0(v, OP_Expire);
setAllPagerFlags(db);
}
break;
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
+ ** pk: Non-zero for PK fields.
*/
case PragTyp_TABLE_INFO: if( zRight ){
Table *pTab;
- pTab = sqlite3FindTable(db, zRight, zDb);
+ pTab = sqlite3LocateTable(pParse, LOCATE_NOERR, zRight, zDb);
if( pTab ){
- static const char *azCol[] = {
- "cid", "name", "type", "notnull", "dflt_value", "pk"
- };
int i, k;
int nHidden = 0;
Column *pCol;
Index *pPk = sqlite3PrimaryKeyIndex(pTab);
pParse->nMem = 6;
sqlite3CodeVerifySchema(pParse, iDb);
- setAllColumnNames(v, 6, azCol); assert( 6==ArraySize(azCol) );
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
if( IsHiddenColumn(pCol) ){
}else{
for(k=1; k<=pTab->nCol && pPk->aiColumn[k-1]!=i; k++){}
}
+ assert( pCol->pDflt==0 || pCol->pDflt->op==TK_SPAN );
sqlite3VdbeMultiLoad(v, 1, "issisi",
i-nHidden,
pCol->zName,
- pCol->zType ? pCol->zType : "",
+ sqlite3ColumnType(pCol,""),
pCol->notNull ? 1 : 0,
- pCol->zDflt,
+ pCol->pDflt ? pCol->pDflt->u.zToken : 0,
k);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6);
}
}
}
break;
+#ifdef SQLITE_DEBUG
case PragTyp_STATS: {
- static const char *azCol[] = { "table", "index", "width", "height" };
Index *pIdx;
HashElem *i;
- v = sqlite3GetVdbe(pParse);
- pParse->nMem = 4;
+ pParse->nMem = 5;
sqlite3CodeVerifySchema(pParse, iDb);
- setAllColumnNames(v, 4, azCol); assert( 4==ArraySize(azCol) );
for(i=sqliteHashFirst(&pDb->pSchema->tblHash); i; i=sqliteHashNext(i)){
Table *pTab = sqliteHashData(i);
- sqlite3VdbeMultiLoad(v, 1, "ssii",
+ sqlite3VdbeMultiLoad(v, 1, "ssiii",
pTab->zName,
0,
- (int)sqlite3LogEstToInt(pTab->szTabRow),
- (int)sqlite3LogEstToInt(pTab->nRowLogEst));
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4);
+ pTab->szTabRow,
+ pTab->nRowLogEst,
+ pTab->tabFlags);
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
- sqlite3VdbeMultiLoad(v, 2, "sii",
+ sqlite3VdbeMultiLoad(v, 2, "siiiX",
pIdx->zName,
- (int)sqlite3LogEstToInt(pIdx->szIdxRow),
- (int)sqlite3LogEstToInt(pIdx->aiRowLogEst[0]));
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4);
+ pIdx->szIdxRow,
+ pIdx->aiRowLogEst[0],
+ pIdx->hasStat1);
+ sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5);
}
}
}
break;
+#endif
case PragTyp_INDEX_INFO: if( zRight ){
Index *pIdx;
Table *pTab;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
- static const char *azCol[] = {
- "seqno", "cid", "name", "desc", "coll", "key"
- };
int i;
int mx;
if( pPragma->iArg ){
}
pTab = pIdx->pTable;
sqlite3CodeVerifySchema(pParse, iDb);
- assert( pParse->nMem<=ArraySize(azCol) );
- setAllColumnNames(v, pParse->nMem, azCol);
+ assert( pParse->nMem<=pPragma->nPragCName );
for(i=0; i<mx; i++){
i16 cnum = pIdx->aiColumn[i];
- sqlite3VdbeMultiLoad(v, 1, "iis", i, cnum,
+ sqlite3VdbeMultiLoad(v, 1, "iisX", i, cnum,
cnum<0 ? 0 : pTab->aCol[cnum].zName);
if( pPragma->iArg ){
- sqlite3VdbeMultiLoad(v, 4, "isi",
+ sqlite3VdbeMultiLoad(v, 4, "isiX",
pIdx->aSortOrder[i],
pIdx->azColl[i],
i<pIdx->nKeyCol);
int i;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
- static const char *azCol[] = {
- "seq", "name", "unique", "origin", "partial"
- };
- v = sqlite3GetVdbe(pParse);
pParse->nMem = 5;
sqlite3CodeVerifySchema(pParse, iDb);
- setAllColumnNames(v, 5, azCol); assert( 5==ArraySize(azCol) );
for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){
const char *azOrigin[] = { "c", "u", "pk" };
sqlite3VdbeMultiLoad(v, 1, "isisi",
IsUniqueIndex(pIdx),
azOrigin[pIdx->idxType],
pIdx->pPartIdxWhere!=0);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5);
}
}
}
break;
case PragTyp_DATABASE_LIST: {
- static const char *azCol[] = { "seq", "name", "file" };
int i;
pParse->nMem = 3;
- setAllColumnNames(v, 3, azCol); assert( 3==ArraySize(azCol) );
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
- assert( db->aDb[i].zName!=0 );
+ assert( db->aDb[i].zDbSName!=0 );
sqlite3VdbeMultiLoad(v, 1, "iss",
i,
- db->aDb[i].zName,
+ db->aDb[i].zDbSName,
sqlite3BtreeGetFilename(db->aDb[i].pBt));
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
}
}
break;
case PragTyp_COLLATION_LIST: {
- static const char *azCol[] = { "seq", "name" };
int i = 0;
HashElem *p;
pParse->nMem = 2;
- setAllColumnNames(v, 2, azCol); assert( 2==ArraySize(azCol) );
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeMultiLoad(v, 1, "is", i++, pColl->zName);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
}
}
break;
+
+#ifdef SQLITE_INTROSPECTION_PRAGMAS
+ case PragTyp_FUNCTION_LIST: {
+ int i;
+ HashElem *j;
+ FuncDef *p;
+ pParse->nMem = 2;
+ for(i=0; i<SQLITE_FUNC_HASH_SZ; i++){
+ for(p=sqlite3BuiltinFunctions.a[i]; p; p=p->u.pHash ){
+ sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 1);
+ }
+ }
+ for(j=sqliteHashFirst(&db->aFunc); j; j=sqliteHashNext(j)){
+ p = (FuncDef*)sqliteHashData(j);
+ sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 0);
+ }
+ }
+ break;
+
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ case PragTyp_MODULE_LIST: {
+ HashElem *j;
+ pParse->nMem = 1;
+ for(j=sqliteHashFirst(&db->aModule); j; j=sqliteHashNext(j)){
+ Module *pMod = (Module*)sqliteHashData(j);
+ sqlite3VdbeMultiLoad(v, 1, "s", pMod->zName);
+ }
+ }
+ break;
+#endif /* SQLITE_OMIT_VIRTUALTABLE */
+
+ case PragTyp_PRAGMA_LIST: {
+ int i;
+ for(i=0; i<ArraySize(aPragmaName); i++){
+ sqlite3VdbeMultiLoad(v, 1, "s", aPragmaName[i].zName);
+ }
+ }
+ break;
+#endif /* SQLITE_INTROSPECTION_PRAGMAS */
+
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
Table *pTab;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
- v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
- static const char *azCol[] = {
- "id", "seq", "table", "from", "to", "on_update", "on_delete",
- "match"
- };
int i = 0;
pParse->nMem = 8;
sqlite3CodeVerifySchema(pParse, iDb);
- setAllColumnNames(v, 8, azCol); assert( 8==ArraySize(azCol) );
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
actionName(pFK->aAction[1]), /* ON UPDATE */
actionName(pFK->aAction[0]), /* ON DELETE */
"NONE");
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 8);
}
++i;
pFK = pFK->pNextFrom;
int addrTop; /* Top of a loop checking foreign keys */
int addrOk; /* Jump here if the key is OK */
int *aiCols; /* child to parent column mapping */
- static const char *azCol[] = { "table", "rowid", "parent", "fkid" };
regResult = pParse->nMem+1;
pParse->nMem += 4;
regKey = ++pParse->nMem;
regRow = ++pParse->nMem;
- v = sqlite3GetVdbe(pParse);
- setAllColumnNames(v, 4, azCol); assert( 4==ArraySize(azCol) );
sqlite3CodeVerifySchema(pParse, iDb);
k = sqliteHashFirst(&db->aDb[iDb].pSchema->tblHash);
while( k ){
assert( x==0 );
}
addrOk = sqlite3VdbeMakeLabel(v);
- if( pParent && pIdx==0 ){
- int iKey = pFK->aCol[0].iFrom;
- assert( iKey>=0 && iKey<pTab->nCol );
- if( iKey!=pTab->iPKey ){
- sqlite3VdbeAddOp3(v, OP_Column, 0, iKey, regRow);
- sqlite3ColumnDefault(v, pTab, iKey, regRow);
- sqlite3VdbeAddOp2(v, OP_IsNull, regRow, addrOk); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_MustBeInt, regRow,
- sqlite3VdbeCurrentAddr(v)+3); VdbeCoverage(v);
- }else{
- sqlite3VdbeAddOp2(v, OP_Rowid, 0, regRow);
- }
- sqlite3VdbeAddOp3(v, OP_NotExists, i, 0, regRow); VdbeCoverage(v);
+
+ /* Generate code to read the child key values into registers
+ ** regRow..regRow+n. If any of the child key values are NULL, this
+ ** row cannot cause an FK violation. Jump directly to addrOk in
+ ** this case. */
+ for(j=0; j<pFK->nCol; j++){
+ int iCol = aiCols ? aiCols[j] : pFK->aCol[j].iFrom;
+ sqlite3ExprCodeGetColumnOfTable(v, pTab, 0, iCol, regRow+j);
+ sqlite3VdbeAddOp2(v, OP_IsNull, regRow+j, addrOk); VdbeCoverage(v);
+ }
+
+ /* Generate code to query the parent index for a matching parent
+ ** key. If a match is found, jump to addrOk. */
+ if( pIdx ){
+ sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, pFK->nCol, regKey,
+ sqlite3IndexAffinityStr(db,pIdx), pFK->nCol);
+ sqlite3VdbeAddOp4Int(v, OP_Found, i, addrOk, regKey, 0);
+ VdbeCoverage(v);
+ }else if( pParent ){
+ int jmp = sqlite3VdbeCurrentAddr(v)+2;
+ sqlite3VdbeAddOp3(v, OP_SeekRowid, i, jmp, regRow); VdbeCoverage(v);
sqlite3VdbeGoto(v, addrOk);
- sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2);
+ assert( pFK->nCol==1 );
+ }
+
+ /* Generate code to report an FK violation to the caller. */
+ if( HasRowid(pTab) ){
+ sqlite3VdbeAddOp2(v, OP_Rowid, 0, regResult+1);
}else{
- for(j=0; j<pFK->nCol; j++){
- sqlite3ExprCodeGetColumnOfTable(v, pTab, 0,
- aiCols ? aiCols[j] : pFK->aCol[j].iFrom, regRow+j);
- sqlite3VdbeAddOp2(v, OP_IsNull, regRow+j, addrOk); VdbeCoverage(v);
- }
- if( pParent ){
- sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, pFK->nCol, regKey,
- sqlite3IndexAffinityStr(db,pIdx), pFK->nCol);
- sqlite3VdbeAddOp4Int(v, OP_Found, i, addrOk, regKey, 0);
- VdbeCoverage(v);
- }
+ sqlite3VdbeAddOp2(v, OP_Null, 0, regResult+1);
}
- sqlite3VdbeAddOp2(v, OP_Rowid, 0, regResult+1);
- sqlite3VdbeMultiLoad(v, regResult+2, "si", pFK->zTo, i-1);
+ sqlite3VdbeMultiLoad(v, regResult+2, "siX", pFK->zTo, i-1);
sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, 4);
sqlite3VdbeResolveLabel(v, addrOk);
sqlite3DbFree(db, aiCols);
case PragTyp_PARSER_TRACE: {
if( zRight ){
if( sqlite3GetBoolean(zRight, 0) ){
- sqlite3ParserTrace(stderr, "parser: ");
+ sqlite3ParserTrace(stdout, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
#endif
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
- /* Pragma "quick_check" is reduced version of
+ /* PRAGMA integrity_check
+ ** PRAGMA integrity_check(N)
+ ** PRAGMA quick_check
+ ** PRAGMA quick_check(N)
+ **
+ ** Verify the integrity of the database.
+ **
+ ** The "quick_check" is reduced version of
** integrity_check designed to detect most database corruption
- ** without most of the overhead of a full integrity-check.
+ ** without the overhead of cross-checking indexes. Quick_check
+ ** is linear time wherease integrity_check is O(NlogN).
*/
case PragTyp_INTEGRITY_CHECK: {
int i, j, addr, mxErr;
- /* Code that appears at the end of the integrity check. If no error
- ** messages have been generated, output OK. Otherwise output the
- ** error message
- */
- static const int iLn = VDBE_OFFSET_LINENO(2);
- static const VdbeOpList endCode[] = {
- { OP_AddImm, 1, 0, 0}, /* 0 */
- { OP_If, 1, 0, 0}, /* 1 */
- { OP_String8, 0, 3, 0}, /* 2 */
- { OP_ResultRow, 3, 1, 0},
- };
-
int isQuick = (sqlite3Tolower(zLeft[0])=='q');
/* If the PRAGMA command was of the form "PRAGMA <db>.integrity_check",
/* Initialize the VDBE program */
pParse->nMem = 6;
- setOneColumnName(v, "integrity_check");
/* Set the maximum error count */
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
}
}
- sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */
+ sqlite3VdbeAddOp2(v, OP_Integer, mxErr-1, 1); /* reg[1] holds errors left */
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
- HashElem *x;
- Hash *pTbls;
- int cnt = 0;
+ HashElem *x; /* For looping over tables in the schema */
+ Hash *pTbls; /* Set of all tables in the schema */
+ int *aRoot; /* Array of root page numbers of all btrees */
+ int cnt = 0; /* Number of entries in aRoot[] */
+ int mxIdx = 0; /* Maximum number of indexes for any table */
if( OMIT_TEMPDB && i==1 ) continue;
if( iDb>=0 && i!=iDb ) continue;
sqlite3CodeVerifySchema(pParse, i);
- addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */
- VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
- sqlite3VdbeJumpHere(v, addr);
/* Do an integrity check of the B-Tree
**
- ** Begin by filling registers 2, 3, ... with the root pages numbers
+ ** Begin by finding the root pages numbers
** for all tables and indices in the database.
*/
assert( sqlite3SchemaMutexHeld(db, i, 0) );
pTbls = &db->aDb[i].pSchema->tblHash;
- for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
+ for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
+ Table *pTab = sqliteHashData(x); /* Current table */
+ Index *pIdx; /* An index on pTab */
+ int nIdx; /* Number of indexes on pTab */
+ if( HasRowid(pTab) ) cnt++;
+ for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ cnt++; }
+ if( nIdx>mxIdx ) mxIdx = nIdx;
+ }
+ aRoot = sqlite3DbMallocRawNN(db, sizeof(int)*(cnt+1));
+ if( aRoot==0 ) break;
+ for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
- if( HasRowid(pTab) ){
- sqlite3VdbeAddOp2(v, OP_Integer, pTab->tnum, 2+cnt);
- VdbeComment((v, "%s", pTab->zName));
- cnt++;
- }
+ if( HasRowid(pTab) ) aRoot[++cnt] = pTab->tnum;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
- sqlite3VdbeAddOp2(v, OP_Integer, pIdx->tnum, 2+cnt);
- VdbeComment((v, "%s", pIdx->zName));
- cnt++;
+ aRoot[++cnt] = pIdx->tnum;
}
}
+ aRoot[0] = cnt;
/* Make sure sufficient number of registers have been allocated */
- pParse->nMem = MAX( pParse->nMem, cnt+8 );
+ pParse->nMem = MAX( pParse->nMem, 8+mxIdx );
+ sqlite3ClearTempRegCache(pParse);
/* Do the b-tree integrity checks */
- sqlite3VdbeAddOp3(v, OP_IntegrityCk, 2, cnt, 1);
+ sqlite3VdbeAddOp4(v, OP_IntegrityCk, 2, cnt, 1, (char*)aRoot,P4_INTARRAY);
sqlite3VdbeChangeP5(v, (u8)i);
addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2); VdbeCoverage(v);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
- sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
+ sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zDbSName),
P4_DYNAMIC);
- sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1);
- sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1);
+ sqlite3VdbeAddOp3(v, OP_Concat, 2, 3, 3);
+ integrityCheckResultRow(v);
sqlite3VdbeJumpHere(v, addr);
/* Make sure all the indices are constructed correctly.
*/
- for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){
+ for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx, *pPk;
Index *pPrior = 0;
int iDataCur, iIdxCur;
int r1 = -1;
- if( pTab->pIndex==0 ) continue;
+ if( pTab->tnum<1 ) continue; /* Skip VIEWs or VIRTUAL TABLEs */
pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
- addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */
- VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
- sqlite3VdbeJumpHere(v, addr);
sqlite3ExprCacheClear(pParse);
- sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenRead,
+ sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenRead, 0,
1, 0, &iDataCur, &iIdxCur);
+ /* reg[7] counts the number of entries in the table.
+ ** reg[8+i] counts the number of entries in the i-th index
+ */
sqlite3VdbeAddOp2(v, OP_Integer, 0, 7);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
sqlite3VdbeAddOp2(v, OP_Integer, 0, 8+j); /* index entries counter */
}
- pParse->nMem = MAX(pParse->nMem, 8+j);
+ assert( pParse->nMem>=8+j );
+ assert( sqlite3NoTempsInRange(pParse,1,7+j) );
sqlite3VdbeAddOp2(v, OP_Rewind, iDataCur, 0); VdbeCoverage(v);
loopTop = sqlite3VdbeAddOp2(v, OP_AddImm, 7, 1);
/* Verify that all NOT NULL columns really are NOT NULL */
for(j=0; j<pTab->nCol; j++){
char *zErr;
- int jmp2, jmp3;
+ int jmp2;
if( j==pTab->iPKey ) continue;
if( pTab->aCol[j].notNull==0 ) continue;
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, j, 3);
sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG);
jmp2 = sqlite3VdbeAddOp1(v, OP_NotNull, 3); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName,
pTab->aCol[j].zName);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1);
- jmp3 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v);
- sqlite3VdbeAddOp0(v, OP_Halt);
+ integrityCheckResultRow(v);
sqlite3VdbeJumpHere(v, jmp2);
- sqlite3VdbeJumpHere(v, jmp3);
}
- /* Validate index entries for the current row */
- for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
- int jmp2, jmp3, jmp4, jmp5;
- int ckUniq = sqlite3VdbeMakeLabel(v);
- if( pPk==pIdx ) continue;
- r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3,
- pPrior, r1);
- pPrior = pIdx;
- sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1); /* increment entry count */
- /* Verify that an index entry exists for the current table row */
- jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1,
- pIdx->nColumn); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
- sqlite3VdbeLoadString(v, 3, "row ");
- sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3);
- sqlite3VdbeLoadString(v, 4, " missing from index ");
- sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
- jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName);
- sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1);
- jmp4 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v);
- sqlite3VdbeAddOp0(v, OP_Halt);
- sqlite3VdbeJumpHere(v, jmp2);
- /* For UNIQUE indexes, verify that only one entry exists with the
- ** current key. The entry is unique if (1) any column is NULL
- ** or (2) the next entry has a different key */
- if( IsUniqueIndex(pIdx) ){
- int uniqOk = sqlite3VdbeMakeLabel(v);
- int jmp6;
- int kk;
- for(kk=0; kk<pIdx->nKeyCol; kk++){
- int iCol = pIdx->aiColumn[kk];
- assert( iCol!=XN_ROWID && iCol<pTab->nCol );
- if( iCol>=0 && pTab->aCol[iCol].notNull ) continue;
- sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk);
- VdbeCoverage(v);
+ /* Verify CHECK constraints */
+ if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){
+ ExprList *pCheck = sqlite3ExprListDup(db, pTab->pCheck, 0);
+ if( db->mallocFailed==0 ){
+ int addrCkFault = sqlite3VdbeMakeLabel(v);
+ int addrCkOk = sqlite3VdbeMakeLabel(v);
+ char *zErr;
+ int k;
+ pParse->iSelfTab = iDataCur + 1;
+ sqlite3ExprCachePush(pParse);
+ for(k=pCheck->nExpr-1; k>0; k--){
+ sqlite3ExprIfFalse(pParse, pCheck->a[k].pExpr, addrCkFault, 0);
}
- jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v);
- sqlite3VdbeGoto(v, uniqOk);
- sqlite3VdbeJumpHere(v, jmp6);
- sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1,
- pIdx->nKeyCol); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */
- sqlite3VdbeLoadString(v, 3, "non-unique entry in index ");
- sqlite3VdbeGoto(v, jmp5);
- sqlite3VdbeResolveLabel(v, uniqOk);
+ sqlite3ExprIfTrue(pParse, pCheck->a[0].pExpr, addrCkOk,
+ SQLITE_JUMPIFNULL);
+ sqlite3VdbeResolveLabel(v, addrCkFault);
+ pParse->iSelfTab = 0;
+ zErr = sqlite3MPrintf(db, "CHECK constraint failed in %s",
+ pTab->zName);
+ sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC);
+ integrityCheckResultRow(v);
+ sqlite3VdbeResolveLabel(v, addrCkOk);
+ sqlite3ExprCachePop(pParse);
+ }
+ sqlite3ExprListDelete(db, pCheck);
+ }
+ if( !isQuick ){ /* Omit the remaining tests for quick_check */
+ /* Sanity check on record header decoding */
+ sqlite3VdbeAddOp3(v, OP_Column, iDataCur, pTab->nCol-1, 3);
+ sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG);
+ /* Validate index entries for the current row */
+ for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
+ int jmp2, jmp3, jmp4, jmp5;
+ int ckUniq = sqlite3VdbeMakeLabel(v);
+ if( pPk==pIdx ) continue;
+ r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3,
+ pPrior, r1);
+ pPrior = pIdx;
+ sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1);/* increment entry count */
+ /* Verify that an index entry exists for the current table row */
+ jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1,
+ pIdx->nColumn); VdbeCoverage(v);
+ sqlite3VdbeLoadString(v, 3, "row ");
+ sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3);
+ sqlite3VdbeLoadString(v, 4, " missing from index ");
+ sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
+ jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName);
+ sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3);
+ jmp4 = integrityCheckResultRow(v);
+ sqlite3VdbeJumpHere(v, jmp2);
+ /* For UNIQUE indexes, verify that only one entry exists with the
+ ** current key. The entry is unique if (1) any column is NULL
+ ** or (2) the next entry has a different key */
+ if( IsUniqueIndex(pIdx) ){
+ int uniqOk = sqlite3VdbeMakeLabel(v);
+ int jmp6;
+ int kk;
+ for(kk=0; kk<pIdx->nKeyCol; kk++){
+ int iCol = pIdx->aiColumn[kk];
+ assert( iCol!=XN_ROWID && iCol<pTab->nCol );
+ if( iCol>=0 && pTab->aCol[iCol].notNull ) continue;
+ sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk);
+ VdbeCoverage(v);
+ }
+ jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v);
+ sqlite3VdbeGoto(v, uniqOk);
+ sqlite3VdbeJumpHere(v, jmp6);
+ sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1,
+ pIdx->nKeyCol); VdbeCoverage(v);
+ sqlite3VdbeLoadString(v, 3, "non-unique entry in index ");
+ sqlite3VdbeGoto(v, jmp5);
+ sqlite3VdbeResolveLabel(v, uniqOk);
+ }
+ sqlite3VdbeJumpHere(v, jmp4);
+ sqlite3ResolvePartIdxLabel(pParse, jmp3);
}
- sqlite3VdbeJumpHere(v, jmp4);
- sqlite3ResolvePartIdxLabel(pParse, jmp3);
}
sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v);
sqlite3VdbeJumpHere(v, loopTop-1);
#ifndef SQLITE_OMIT_BTREECOUNT
- sqlite3VdbeLoadString(v, 2, "wrong # of entries in index ");
- for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
- if( pPk==pIdx ) continue;
- addr = sqlite3VdbeCurrentAddr(v);
- sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr+2); VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
- sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3);
- sqlite3VdbeAddOp3(v, OP_Eq, 8+j, addr+8, 3); VdbeCoverage(v);
- sqlite3VdbeChangeP5(v, SQLITE_NOTNULL);
- sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1);
- sqlite3VdbeLoadString(v, 3, pIdx->zName);
- sqlite3VdbeAddOp3(v, OP_Concat, 3, 2, 7);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 7, 1);
+ if( !isQuick ){
+ sqlite3VdbeLoadString(v, 2, "wrong # of entries in index ");
+ for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
+ if( pPk==pIdx ) continue;
+ sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3);
+ addr = sqlite3VdbeAddOp3(v, OP_Eq, 8+j, 0, 3); VdbeCoverage(v);
+ sqlite3VdbeChangeP5(v, SQLITE_NOTNULL);
+ sqlite3VdbeLoadString(v, 4, pIdx->zName);
+ sqlite3VdbeAddOp3(v, OP_Concat, 4, 2, 3);
+ integrityCheckResultRow(v);
+ sqlite3VdbeJumpHere(v, addr);
+ }
}
#endif /* SQLITE_OMIT_BTREECOUNT */
}
}
- addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn);
- sqlite3VdbeChangeP2(v, addr, -mxErr);
- sqlite3VdbeJumpHere(v, addr+1);
- sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC);
+ {
+ static const int iLn = VDBE_OFFSET_LINENO(2);
+ static const VdbeOpList endCode[] = {
+ { OP_AddImm, 1, 0, 0}, /* 0 */
+ { OP_IfNotZero, 1, 4, 0}, /* 1 */
+ { OP_String8, 0, 3, 0}, /* 2 */
+ { OP_ResultRow, 3, 1, 0}, /* 3 */
+ { OP_Halt, 0, 0, 0}, /* 4 */
+ { OP_String8, 0, 3, 0}, /* 5 */
+ { OP_Goto, 0, 3, 0}, /* 6 */
+ };
+ VdbeOp *aOp;
+
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn);
+ if( aOp ){
+ aOp[0].p2 = 1-mxErr;
+ aOp[2].p4type = P4_STATIC;
+ aOp[2].p4.z = "ok";
+ aOp[5].p4type = P4_STATIC;
+ aOp[5].p4.z = (char*)sqlite3ErrStr(SQLITE_CORRUPT);
+ }
+ sqlite3VdbeChangeP3(v, 0, sqlite3VdbeCurrentAddr(v)-2);
+ }
}
break;
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
assert( encnames[SQLITE_UTF8].enc==SQLITE_UTF8 );
assert( encnames[SQLITE_UTF16LE].enc==SQLITE_UTF16LE );
assert( encnames[SQLITE_UTF16BE].enc==SQLITE_UTF16BE );
- returnSingleText(v, "encoding", encnames[ENC(pParse->db)].zName);
+ returnSingleText(v, encnames[ENC(pParse->db)].zName);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
- ** PRAGMA [database.]schema_version
- ** PRAGMA [database.]schema_version = <integer>
+ ** PRAGMA [schema.]schema_version
+ ** PRAGMA [schema.]schema_version = <integer>
**
- ** PRAGMA [database.]user_version
- ** PRAGMA [database.]user_version = <integer>
+ ** PRAGMA [schema.]user_version
+ ** PRAGMA [schema.]user_version = <integer>
**
- ** PRAGMA [database.]freelist_count = <integer>
+ ** PRAGMA [schema.]freelist_count
**
- ** PRAGMA [database.]application_id
- ** PRAGMA [database.]application_id = <integer>
+ ** PRAGMA [schema.]data_version
+ **
+ ** PRAGMA [schema.]application_id
+ ** PRAGMA [schema.]application_id = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
case PragTyp_HEADER_VALUE: {
int iCookie = pPragma->iArg; /* Which cookie to read or write */
sqlite3VdbeUsesBtree(v, iDb);
- if( zRight && (pPragma->mPragFlag & PragFlag_ReadOnly)==0 ){
+ if( zRight && (pPragma->mPragFlg & PragFlg_ReadOnly)==0 ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
- { OP_Integer, 0, 1, 0}, /* 1 */
- { OP_SetCookie, 0, 0, 1}, /* 2 */
+ { OP_SetCookie, 0, 0, 0}, /* 1 */
};
- int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie, 0);
- sqlite3VdbeChangeP1(v, addr, iDb);
- sqlite3VdbeChangeP1(v, addr+1, sqlite3Atoi(zRight));
- sqlite3VdbeChangeP1(v, addr+2, iDb);
- sqlite3VdbeChangeP2(v, addr+2, iCookie);
+ VdbeOp *aOp;
+ sqlite3VdbeVerifyNoMallocRequired(v, ArraySize(setCookie));
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie, 0);
+ if( ONLY_IF_REALLOC_STRESS(aOp==0) ) break;
+ aOp[0].p1 = iDb;
+ aOp[1].p1 = iDb;
+ aOp[1].p2 = iCookie;
+ aOp[1].p3 = sqlite3Atoi(zRight);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 1, 0}, /* 1 */
{ OP_ResultRow, 1, 1, 0}
};
- int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie, 0);
- sqlite3VdbeChangeP1(v, addr, iDb);
- sqlite3VdbeChangeP1(v, addr+1, iDb);
- sqlite3VdbeChangeP3(v, addr+1, iCookie);
- sqlite3VdbeSetNumCols(v, 1);
- sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, SQLITE_TRANSIENT);
+ VdbeOp *aOp;
+ sqlite3VdbeVerifyNoMallocRequired(v, ArraySize(readCookie));
+ aOp = sqlite3VdbeAddOpList(v, ArraySize(readCookie),readCookie,0);
+ if( ONLY_IF_REALLOC_STRESS(aOp==0) ) break;
+ aOp[0].p1 = iDb;
+ aOp[1].p1 = iDb;
+ aOp[1].p3 = iCookie;
+ sqlite3VdbeReusable(v);
}
}
break;
int i = 0;
const char *zOpt;
pParse->nMem = 1;
- setOneColumnName(v, "compile_option");
while( (zOpt = sqlite3_compileoption_get(i++))!=0 ){
sqlite3VdbeLoadString(v, 1, zOpt);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}
+ sqlite3VdbeReusable(v);
}
break;
#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
#ifndef SQLITE_OMIT_WAL
/*
- ** PRAGMA [database.]wal_checkpoint = passive|full|restart|truncate
+ ** PRAGMA [schema.]wal_checkpoint = passive|full|restart|truncate
**
** Checkpoint the database.
*/
case PragTyp_WAL_CHECKPOINT: {
- static const char *azCol[] = { "busy", "log", "checkpointed" };
int iBt = (pId2->z?iDb:SQLITE_MAX_ATTACHED);
int eMode = SQLITE_CHECKPOINT_PASSIVE;
if( zRight ){
eMode = SQLITE_CHECKPOINT_TRUNCATE;
}
}
- setAllColumnNames(v, 3, azCol); assert( 3==ArraySize(azCol) );
pParse->nMem = 3;
sqlite3VdbeAddOp3(v, OP_Checkpoint, iBt, eMode, 1);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
if( zRight ){
sqlite3_wal_autocheckpoint(db, sqlite3Atoi(zRight));
}
- returnSingleInt(v, "wal_autocheckpoint",
+ returnSingleInt(v,
db->xWalCallback==sqlite3WalDefaultHook ?
SQLITE_PTR_TO_INT(db->pWalArg) : 0);
}
break;
}
+ /*
+ ** PRAGMA optimize
+ ** PRAGMA optimize(MASK)
+ ** PRAGMA schema.optimize
+ ** PRAGMA schema.optimize(MASK)
+ **
+ ** Attempt to optimize the database. All schemas are optimized in the first
+ ** two forms, and only the specified schema is optimized in the latter two.
+ **
+ ** The details of optimizations performed by this pragma are expected
+ ** to change and improve over time. Applications should anticipate that
+ ** this pragma will perform new optimizations in future releases.
+ **
+ ** The optional argument is a bitmask of optimizations to perform:
+ **
+ ** 0x0001 Debugging mode. Do not actually perform any optimizations
+ ** but instead return one line of text for each optimization
+ ** that would have been done. Off by default.
+ **
+ ** 0x0002 Run ANALYZE on tables that might benefit. On by default.
+ ** See below for additional information.
+ **
+ ** 0x0004 (Not yet implemented) Record usage and performance
+ ** information from the current session in the
+ ** database file so that it will be available to "optimize"
+ ** pragmas run by future database connections.
+ **
+ ** 0x0008 (Not yet implemented) Create indexes that might have
+ ** been helpful to recent queries
+ **
+ ** The default MASK is and always shall be 0xfffe. 0xfffe means perform all
+ ** of the optimizations listed above except Debug Mode, including new
+ ** optimizations that have not yet been invented. If new optimizations are
+ ** ever added that should be off by default, those off-by-default
+ ** optimizations will have bitmasks of 0x10000 or larger.
+ **
+ ** DETERMINATION OF WHEN TO RUN ANALYZE
+ **
+ ** In the current implementation, a table is analyzed if only if all of
+ ** the following are true:
+ **
+ ** (1) MASK bit 0x02 is set.
+ **
+ ** (2) The query planner used sqlite_stat1-style statistics for one or
+ ** more indexes of the table at some point during the lifetime of
+ ** the current connection.
+ **
+ ** (3) One or more indexes of the table are currently unanalyzed OR
+ ** the number of rows in the table has increased by 25 times or more
+ ** since the last time ANALYZE was run.
+ **
+ ** The rules for when tables are analyzed are likely to change in
+ ** future releases.
+ */
+ case PragTyp_OPTIMIZE: {
+ int iDbLast; /* Loop termination point for the schema loop */
+ int iTabCur; /* Cursor for a table whose size needs checking */
+ HashElem *k; /* Loop over tables of a schema */
+ Schema *pSchema; /* The current schema */
+ Table *pTab; /* A table in the schema */
+ Index *pIdx; /* An index of the table */
+ LogEst szThreshold; /* Size threshold above which reanalysis is needd */
+ char *zSubSql; /* SQL statement for the OP_SqlExec opcode */
+ u32 opMask; /* Mask of operations to perform */
+
+ if( zRight ){
+ opMask = (u32)sqlite3Atoi(zRight);
+ if( (opMask & 0x02)==0 ) break;
+ }else{
+ opMask = 0xfffe;
+ }
+ iTabCur = pParse->nTab++;
+ for(iDbLast = zDb?iDb:db->nDb-1; iDb<=iDbLast; iDb++){
+ if( iDb==1 ) continue;
+ sqlite3CodeVerifySchema(pParse, iDb);
+ pSchema = db->aDb[iDb].pSchema;
+ for(k=sqliteHashFirst(&pSchema->tblHash); k; k=sqliteHashNext(k)){
+ pTab = (Table*)sqliteHashData(k);
+
+ /* If table pTab has not been used in a way that would benefit from
+ ** having analysis statistics during the current session, then skip it.
+ ** This also has the effect of skipping virtual tables and views */
+ if( (pTab->tabFlags & TF_StatsUsed)==0 ) continue;
+
+ /* Reanalyze if the table is 25 times larger than the last analysis */
+ szThreshold = pTab->nRowLogEst + 46; assert( sqlite3LogEst(25)==46 );
+ for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
+ if( !pIdx->hasStat1 ){
+ szThreshold = 0; /* Always analyze if any index lacks statistics */
+ break;
+ }
+ }
+ if( szThreshold ){
+ sqlite3OpenTable(pParse, iTabCur, iDb, pTab, OP_OpenRead);
+ sqlite3VdbeAddOp3(v, OP_IfSmaller, iTabCur,
+ sqlite3VdbeCurrentAddr(v)+2+(opMask&1), szThreshold);
+ VdbeCoverage(v);
+ }
+ zSubSql = sqlite3MPrintf(db, "ANALYZE \"%w\".\"%w\"",
+ db->aDb[iDb].zDbSName, pTab->zName);
+ if( opMask & 0x01 ){
+ int r1 = sqlite3GetTempReg(pParse);
+ sqlite3VdbeAddOp4(v, OP_String8, 0, r1, 0, zSubSql, P4_DYNAMIC);
+ sqlite3VdbeAddOp2(v, OP_ResultRow, r1, 1);
+ }else{
+ sqlite3VdbeAddOp4(v, OP_SqlExec, 0, 0, 0, zSubSql, P4_DYNAMIC);
+ }
+ }
+ }
+ sqlite3VdbeAddOp0(v, OP_Expire);
+ break;
+ }
+
/*
** PRAGMA busy_timeout
** PRAGMA busy_timeout = N
if( zRight ){
sqlite3_busy_timeout(db, sqlite3Atoi(zRight));
}
- returnSingleInt(v, "timeout", db->busyTimeout);
+ returnSingleInt(v, db->busyTimeout);
break;
}
if( zRight && sqlite3DecOrHexToI64(zRight, &N)==SQLITE_OK ){
sqlite3_soft_heap_limit64(N);
}
- returnSingleInt(v, "soft_heap_limit", sqlite3_soft_heap_limit64(-1));
+ returnSingleInt(v, sqlite3_soft_heap_limit64(-1));
break;
}
){
sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, (int)(N&0x7fffffff));
}
- returnSingleInt(v, "threads",
- sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1));
+ returnSingleInt(v, sqlite3_limit(db, SQLITE_LIMIT_WORKER_THREADS, -1));
break;
}
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
- static const char *azCol[] = { "database", "status" };
int i;
- setAllColumnNames(v, 2, azCol); assert( 2==ArraySize(azCol) );
pParse->nMem = 2;
for(i=0; i<db->nDb; i++){
Btree *pBt;
const char *zState = "unknown";
int j;
- if( db->aDb[i].zName==0 ) continue;
+ if( db->aDb[i].zDbSName==0 ) continue;
pBt = db->aDb[i].pBt;
if( pBt==0 || sqlite3BtreePager(pBt)==0 ){
zState = "closed";
- }else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0,
+ }else if( sqlite3_file_control(db, i ? db->aDb[i].zDbSName : 0,
SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){
zState = azLockName[j];
}
- sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zName, zState);
- sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
+ sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zDbSName, zState);
}
break;
}
} /* End of the PRAGMA switch */
+ /* The following block is a no-op unless SQLITE_DEBUG is defined. Its only
+ ** purpose is to execute assert() statements to verify that if the
+ ** PragFlg_NoColumns1 flag is set and the caller specified an argument
+ ** to the PRAGMA, the implementation has not added any OP_ResultRow
+ ** instructions to the VM. */
+ if( (pPragma->mPragFlg & PragFlg_NoColumns1) && zRight ){
+ sqlite3VdbeVerifyNoResultRow(v);
+ }
+
pragma_out:
sqlite3DbFree(db, zLeft);
sqlite3DbFree(db, zRight);
}
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+/*****************************************************************************
+** Implementation of an eponymous virtual table that runs a pragma.
+**
+*/
+typedef struct PragmaVtab PragmaVtab;
+typedef struct PragmaVtabCursor PragmaVtabCursor;
+struct PragmaVtab {
+ sqlite3_vtab base; /* Base class. Must be first */
+ sqlite3 *db; /* The database connection to which it belongs */
+ const PragmaName *pName; /* Name of the pragma */
+ u8 nHidden; /* Number of hidden columns */
+ u8 iHidden; /* Index of the first hidden column */
+};
+struct PragmaVtabCursor {
+ sqlite3_vtab_cursor base; /* Base class. Must be first */
+ sqlite3_stmt *pPragma; /* The pragma statement to run */
+ sqlite_int64 iRowid; /* Current rowid */
+ char *azArg[2]; /* Value of the argument and schema */
+};
+
+/*
+** Pragma virtual table module xConnect method.
+*/
+static int pragmaVtabConnect(
+ sqlite3 *db,
+ void *pAux,
+ int argc, const char *const*argv,
+ sqlite3_vtab **ppVtab,
+ char **pzErr
+){
+ const PragmaName *pPragma = (const PragmaName*)pAux;
+ PragmaVtab *pTab = 0;
+ int rc;
+ int i, j;
+ char cSep = '(';
+ StrAccum acc;
+ char zBuf[200];
+
+ UNUSED_PARAMETER(argc);
+ UNUSED_PARAMETER(argv);
+ sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0);
+ sqlite3StrAccumAppendAll(&acc, "CREATE TABLE x");
+ for(i=0, j=pPragma->iPragCName; i<pPragma->nPragCName; i++, j++){
+ sqlite3XPrintf(&acc, "%c\"%s\"", cSep, pragCName[j]);
+ cSep = ',';
+ }
+ if( i==0 ){
+ sqlite3XPrintf(&acc, "(\"%s\"", pPragma->zName);
+ cSep = ',';
+ i++;
+ }
+ j = 0;
+ if( pPragma->mPragFlg & PragFlg_Result1 ){
+ sqlite3StrAccumAppendAll(&acc, ",arg HIDDEN");
+ j++;
+ }
+ if( pPragma->mPragFlg & (PragFlg_SchemaOpt|PragFlg_SchemaReq) ){
+ sqlite3StrAccumAppendAll(&acc, ",schema HIDDEN");
+ j++;
+ }
+ sqlite3StrAccumAppend(&acc, ")", 1);
+ sqlite3StrAccumFinish(&acc);
+ assert( strlen(zBuf) < sizeof(zBuf)-1 );
+ rc = sqlite3_declare_vtab(db, zBuf);
+ if( rc==SQLITE_OK ){
+ pTab = (PragmaVtab*)sqlite3_malloc(sizeof(PragmaVtab));
+ if( pTab==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ memset(pTab, 0, sizeof(PragmaVtab));
+ pTab->pName = pPragma;
+ pTab->db = db;
+ pTab->iHidden = i;
+ pTab->nHidden = j;
+ }
+ }else{
+ *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db));
+ }
+
+ *ppVtab = (sqlite3_vtab*)pTab;
+ return rc;
+}
+
+/*
+** Pragma virtual table module xDisconnect method.
+*/
+static int pragmaVtabDisconnect(sqlite3_vtab *pVtab){
+ PragmaVtab *pTab = (PragmaVtab*)pVtab;
+ sqlite3_free(pTab);
+ return SQLITE_OK;
+}
+
+/* Figure out the best index to use to search a pragma virtual table.
+**
+** There are not really any index choices. But we want to encourage the
+** query planner to give == constraints on as many hidden parameters as
+** possible, and especially on the first hidden parameter. So return a
+** high cost if hidden parameters are unconstrained.
+*/
+static int pragmaVtabBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){
+ PragmaVtab *pTab = (PragmaVtab*)tab;
+ const struct sqlite3_index_constraint *pConstraint;
+ int i, j;
+ int seen[2];
+
+ pIdxInfo->estimatedCost = (double)1;
+ if( pTab->nHidden==0 ){ return SQLITE_OK; }
+ pConstraint = pIdxInfo->aConstraint;
+ seen[0] = 0;
+ seen[1] = 0;
+ for(i=0; i<pIdxInfo->nConstraint; i++, pConstraint++){
+ if( pConstraint->usable==0 ) continue;
+ if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;
+ if( pConstraint->iColumn < pTab->iHidden ) continue;
+ j = pConstraint->iColumn - pTab->iHidden;
+ assert( j < 2 );
+ seen[j] = i+1;
+ }
+ if( seen[0]==0 ){
+ pIdxInfo->estimatedCost = (double)2147483647;
+ pIdxInfo->estimatedRows = 2147483647;
+ return SQLITE_OK;
+ }
+ j = seen[0]-1;
+ pIdxInfo->aConstraintUsage[j].argvIndex = 1;
+ pIdxInfo->aConstraintUsage[j].omit = 1;
+ if( seen[1]==0 ) return SQLITE_OK;
+ pIdxInfo->estimatedCost = (double)20;
+ pIdxInfo->estimatedRows = 20;
+ j = seen[1]-1;
+ pIdxInfo->aConstraintUsage[j].argvIndex = 2;
+ pIdxInfo->aConstraintUsage[j].omit = 1;
+ return SQLITE_OK;
+}
+
+/* Create a new cursor for the pragma virtual table */
+static int pragmaVtabOpen(sqlite3_vtab *pVtab, sqlite3_vtab_cursor **ppCursor){
+ PragmaVtabCursor *pCsr;
+ pCsr = (PragmaVtabCursor*)sqlite3_malloc(sizeof(*pCsr));
+ if( pCsr==0 ) return SQLITE_NOMEM;
+ memset(pCsr, 0, sizeof(PragmaVtabCursor));
+ pCsr->base.pVtab = pVtab;
+ *ppCursor = &pCsr->base;
+ return SQLITE_OK;
+}
+
+/* Clear all content from pragma virtual table cursor. */
+static void pragmaVtabCursorClear(PragmaVtabCursor *pCsr){
+ int i;
+ sqlite3_finalize(pCsr->pPragma);
+ pCsr->pPragma = 0;
+ for(i=0; i<ArraySize(pCsr->azArg); i++){
+ sqlite3_free(pCsr->azArg[i]);
+ pCsr->azArg[i] = 0;
+ }
+}
+
+/* Close a pragma virtual table cursor */
+static int pragmaVtabClose(sqlite3_vtab_cursor *cur){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)cur;
+ pragmaVtabCursorClear(pCsr);
+ sqlite3_free(pCsr);
+ return SQLITE_OK;
+}
+
+/* Advance the pragma virtual table cursor to the next row */
+static int pragmaVtabNext(sqlite3_vtab_cursor *pVtabCursor){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor;
+ int rc = SQLITE_OK;
+
+ /* Increment the xRowid value */
+ pCsr->iRowid++;
+ assert( pCsr->pPragma );
+ if( SQLITE_ROW!=sqlite3_step(pCsr->pPragma) ){
+ rc = sqlite3_finalize(pCsr->pPragma);
+ pCsr->pPragma = 0;
+ pragmaVtabCursorClear(pCsr);
+ }
+ return rc;
+}
+
+/*
+** Pragma virtual table module xFilter method.
+*/
+static int pragmaVtabFilter(
+ sqlite3_vtab_cursor *pVtabCursor,
+ int idxNum, const char *idxStr,
+ int argc, sqlite3_value **argv
+){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor;
+ PragmaVtab *pTab = (PragmaVtab*)(pVtabCursor->pVtab);
+ int rc;
+ int i, j;
+ StrAccum acc;
+ char *zSql;
+
+ UNUSED_PARAMETER(idxNum);
+ UNUSED_PARAMETER(idxStr);
+ pragmaVtabCursorClear(pCsr);
+ j = (pTab->pName->mPragFlg & PragFlg_Result1)!=0 ? 0 : 1;
+ for(i=0; i<argc; i++, j++){
+ const char *zText = (const char*)sqlite3_value_text(argv[i]);
+ assert( j<ArraySize(pCsr->azArg) );
+ assert( pCsr->azArg[j]==0 );
+ if( zText ){
+ pCsr->azArg[j] = sqlite3_mprintf("%s", zText);
+ if( pCsr->azArg[j]==0 ){
+ return SQLITE_NOMEM;
+ }
+ }
+ }
+ sqlite3StrAccumInit(&acc, 0, 0, 0, pTab->db->aLimit[SQLITE_LIMIT_SQL_LENGTH]);
+ sqlite3StrAccumAppendAll(&acc, "PRAGMA ");
+ if( pCsr->azArg[1] ){
+ sqlite3XPrintf(&acc, "%Q.", pCsr->azArg[1]);
+ }
+ sqlite3StrAccumAppendAll(&acc, pTab->pName->zName);
+ if( pCsr->azArg[0] ){
+ sqlite3XPrintf(&acc, "=%Q", pCsr->azArg[0]);
+ }
+ zSql = sqlite3StrAccumFinish(&acc);
+ if( zSql==0 ) return SQLITE_NOMEM;
+ rc = sqlite3_prepare_v2(pTab->db, zSql, -1, &pCsr->pPragma, 0);
+ sqlite3_free(zSql);
+ if( rc!=SQLITE_OK ){
+ pTab->base.zErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pTab->db));
+ return rc;
+ }
+ return pragmaVtabNext(pVtabCursor);
+}
+
+/*
+** Pragma virtual table module xEof method.
+*/
+static int pragmaVtabEof(sqlite3_vtab_cursor *pVtabCursor){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor;
+ return (pCsr->pPragma==0);
+}
+
+/* The xColumn method simply returns the corresponding column from
+** the PRAGMA.
+*/
+static int pragmaVtabColumn(
+ sqlite3_vtab_cursor *pVtabCursor,
+ sqlite3_context *ctx,
+ int i
+){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor;
+ PragmaVtab *pTab = (PragmaVtab*)(pVtabCursor->pVtab);
+ if( i<pTab->iHidden ){
+ sqlite3_result_value(ctx, sqlite3_column_value(pCsr->pPragma, i));
+ }else{
+ sqlite3_result_text(ctx, pCsr->azArg[i-pTab->iHidden],-1,SQLITE_TRANSIENT);
+ }
+ return SQLITE_OK;
+}
+
+/*
+** Pragma virtual table module xRowid method.
+*/
+static int pragmaVtabRowid(sqlite3_vtab_cursor *pVtabCursor, sqlite_int64 *p){
+ PragmaVtabCursor *pCsr = (PragmaVtabCursor*)pVtabCursor;
+ *p = pCsr->iRowid;
+ return SQLITE_OK;
+}
+
+/* The pragma virtual table object */
+static const sqlite3_module pragmaVtabModule = {
+ 0, /* iVersion */
+ 0, /* xCreate - create a table */
+ pragmaVtabConnect, /* xConnect - connect to an existing table */
+ pragmaVtabBestIndex, /* xBestIndex - Determine search strategy */
+ pragmaVtabDisconnect, /* xDisconnect - Disconnect from a table */
+ 0, /* xDestroy - Drop a table */
+ pragmaVtabOpen, /* xOpen - open a cursor */
+ pragmaVtabClose, /* xClose - close a cursor */
+ pragmaVtabFilter, /* xFilter - configure scan constraints */
+ pragmaVtabNext, /* xNext - advance a cursor */
+ pragmaVtabEof, /* xEof */
+ pragmaVtabColumn, /* xColumn - read data */
+ pragmaVtabRowid, /* xRowid - read data */
+ 0, /* xUpdate - write data */
+ 0, /* xBegin - begin transaction */
+ 0, /* xSync - sync transaction */
+ 0, /* xCommit - commit transaction */
+ 0, /* xRollback - rollback transaction */
+ 0, /* xFindFunction - function overloading */
+ 0, /* xRename - rename the table */
+ 0, /* xSavepoint */
+ 0, /* xRelease */
+ 0 /* xRollbackTo */
+};
+
+/*
+** Check to see if zTabName is really the name of a pragma. If it is,
+** then register an eponymous virtual table for that pragma and return
+** a pointer to the Module object for the new virtual table.
+*/
+SQLITE_PRIVATE Module *sqlite3PragmaVtabRegister(sqlite3 *db, const char *zName){
+ const PragmaName *pName;
+ assert( sqlite3_strnicmp(zName, "pragma_", 7)==0 );
+ pName = pragmaLocate(zName+7);
+ if( pName==0 ) return 0;
+ if( (pName->mPragFlg & (PragFlg_Result0|PragFlg_Result1))==0 ) return 0;
+ assert( sqlite3HashFind(&db->aModule, zName)==0 );
+ return sqlite3VtabCreateModule(db, zName, &pragmaVtabModule, (void*)pName, 0);
+}
+
+#endif /* SQLITE_OMIT_VIRTUALTABLE */
#endif /* SQLITE_OMIT_PRAGMA */
const char *zExtra /* Error information */
){
sqlite3 *db = pData->db;
- if( !db->mallocFailed && (db->flags & SQLITE_RecoveryMode)==0 ){
+ if( !db->mallocFailed && (db->flags & SQLITE_WriteSchema)==0 ){
char *z;
if( zObj==0 ) zObj = "?";
- z = sqlite3_mprintf("malformed database schema (%s)", zObj);
- if( z && zExtra ) z = sqlite3_mprintf("%z - %s", z, zExtra);
+ z = sqlite3MPrintf(db, "malformed database schema (%s)", zObj);
+ if( zExtra && zExtra[0] ) z = sqlite3MPrintf(db, "%z - %s", z, zExtra);
sqlite3DbFree(db, *pData->pzErrMsg);
*pData->pzErrMsg = z;
- if( z==0 ) db->mallocFailed = 1;
}
- pData->rc = db->mallocFailed ? SQLITE_NOMEM : SQLITE_CORRUPT_BKPT;
+ pData->rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_CORRUPT_BKPT;
}
/*
** structures that describe the table, index, or view.
*/
int rc;
+ u8 saved_iDb = db->init.iDb;
sqlite3_stmt *pStmt;
TESTONLY(int rcp); /* Return code from sqlite3_prepare() */
TESTONLY(rcp = ) sqlite3_prepare(db, argv[2], -1, &pStmt, 0);
rc = db->errCode;
assert( (rc&0xFF)==(rcp&0xFF) );
- db->init.iDb = 0;
+ db->init.iDb = saved_iDb;
+ assert( saved_iDb==0 || (db->mDbFlags & DBFLAG_Vacuum)!=0 );
if( SQLITE_OK!=rc ){
if( db->init.orphanTrigger ){
assert( iDb==1 );
}else{
pData->rc = rc;
if( rc==SQLITE_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}else if( rc!=SQLITE_INTERRUPT && (rc&0xFF)!=SQLITE_LOCKED ){
corruptSchema(pData, argv[0], sqlite3_errmsg(db));
}
** to do here is record the root page number for that index.
*/
Index *pIndex;
- pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zName);
+ pIndex = sqlite3FindIndex(db, argv[0], db->aDb[iDb].zDbSName);
if( pIndex==0 ){
/* This can occur if there exists an index on a TEMP table which
** has the same name as another index on a permanent index. Since
#ifndef SQLITE_OMIT_DEPRECATED
int size;
#endif
- Table *pTab;
Db *pDb;
char const *azArg[4];
int meta[5];
InitData initData;
- char const *zMasterSchema;
- char const *zMasterName;
+ const char *zMasterName;
int openedTransaction = 0;
- /*
- ** The master database table has a structure like this
- */
- static const char master_schema[] =
- "CREATE TABLE sqlite_master(\n"
- " type text,\n"
- " name text,\n"
- " tbl_name text,\n"
- " rootpage integer,\n"
- " sql text\n"
- ")"
- ;
-#ifndef SQLITE_OMIT_TEMPDB
- static const char temp_master_schema[] =
- "CREATE TEMP TABLE sqlite_temp_master(\n"
- " type text,\n"
- " name text,\n"
- " tbl_name text,\n"
- " rootpage integer,\n"
- " sql text\n"
- ")"
- ;
-#else
- #define temp_master_schema 0
-#endif
-
assert( iDb>=0 && iDb<db->nDb );
assert( db->aDb[iDb].pSchema );
assert( sqlite3_mutex_held(db->mutex) );
assert( iDb==1 || sqlite3BtreeHoldsMutex(db->aDb[iDb].pBt) );
- /* zMasterSchema and zInitScript are set to point at the master schema
- ** and initialisation script appropriate for the database being
- ** initialized. zMasterName is the name of the master table.
- */
- if( !OMIT_TEMPDB && iDb==1 ){
- zMasterSchema = temp_master_schema;
- }else{
- zMasterSchema = master_schema;
- }
- zMasterName = SCHEMA_TABLE(iDb);
+ db->init.busy = 1;
- /* Construct the schema tables. */
- azArg[0] = zMasterName;
+ /* Construct the in-memory representation schema tables (sqlite_master or
+ ** sqlite_temp_master) by invoking the parser directly. The appropriate
+ ** table name will be inserted automatically by the parser so we can just
+ ** use the abbreviation "x" here. The parser will also automatically tag
+ ** the schema table as read-only. */
+ azArg[0] = zMasterName = SCHEMA_TABLE(iDb);
azArg[1] = "1";
- azArg[2] = zMasterSchema;
+ azArg[2] = "CREATE TABLE x(type text,name text,tbl_name text,"
+ "rootpage int,sql text)";
azArg[3] = 0;
initData.db = db;
initData.iDb = iDb;
rc = initData.rc;
goto error_out;
}
- pTab = sqlite3FindTable(db, zMasterName, db->aDb[iDb].zName);
- if( ALWAYS(pTab) ){
- pTab->tabFlags |= TF_Readonly;
- }
/* Create a cursor to hold the database open
*/
pDb = &db->aDb[iDb];
if( pDb->pBt==0 ){
- if( !OMIT_TEMPDB && ALWAYS(iDb==1) ){
- DbSetProperty(db, 1, DB_SchemaLoaded);
- }
- return SQLITE_OK;
+ assert( iDb==1 );
+ DbSetProperty(db, 1, DB_SchemaLoaded);
+ rc = SQLITE_OK;
+ goto error_out;
}
/* If there is not already a read-only (or read-write) transaction opened
{
char *zSql;
zSql = sqlite3MPrintf(db,
- "SELECT name, rootpage, sql FROM '%q'.%s ORDER BY rowid",
- db->aDb[iDb].zName, zMasterName);
+ "SELECT name, rootpage, sql FROM \"%w\".%s ORDER BY rowid",
+ db->aDb[iDb].zDbSName, zMasterName);
#ifndef SQLITE_OMIT_AUTHORIZATION
{
sqlite3_xauth xAuth;
#endif
}
if( db->mallocFailed ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
sqlite3ResetAllSchemasOfConnection(db);
}
- if( rc==SQLITE_OK || (db->flags&SQLITE_RecoveryMode)){
- /* Black magic: If the SQLITE_RecoveryMode flag is set, then consider
+ if( rc==SQLITE_OK || (db->flags&SQLITE_WriteSchema)){
+ /* Black magic: If the SQLITE_WriteSchema flag is set, then consider
** the schema loaded, even if errors occurred. In this situation the
** current sqlite3_prepare() operation will fail, but the following one
** will attempt to compile the supplied statement against whatever subset
sqlite3BtreeLeave(pDb->pBt);
error_out:
- if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
- db->mallocFailed = 1;
+ if( rc ){
+ if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
+ sqlite3OomFault(db);
+ }
+ sqlite3ResetOneSchema(db, iDb);
}
+ db->init.busy = 0;
return rc;
}
*/
SQLITE_PRIVATE int sqlite3Init(sqlite3 *db, char **pzErrMsg){
int i, rc;
- int commit_internal = !(db->flags&SQLITE_InternChanges);
+ int commit_internal = !(db->mDbFlags&DBFLAG_SchemaChange);
assert( sqlite3_mutex_held(db->mutex) );
assert( sqlite3BtreeHoldsMutex(db->aDb[0].pBt) );
assert( db->init.busy==0 );
- rc = SQLITE_OK;
- db->init.busy = 1;
ENC(db) = SCHEMA_ENC(db);
- for(i=0; rc==SQLITE_OK && i<db->nDb; i++){
- if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue;
- rc = sqlite3InitOne(db, i, pzErrMsg);
- if( rc ){
- sqlite3ResetOneSchema(db, i);
- }
+ assert( db->nDb>0 );
+ /* Do the main schema first */
+ if( !DbHasProperty(db, 0, DB_SchemaLoaded) ){
+ rc = sqlite3InitOne(db, 0, pzErrMsg);
+ if( rc ) return rc;
}
-
- /* Once all the other databases have been initialized, load the schema
- ** for the TEMP database. This is loaded last, as the TEMP database
- ** schema may contain references to objects in other databases.
- */
-#ifndef SQLITE_OMIT_TEMPDB
- assert( db->nDb>1 );
- if( rc==SQLITE_OK && !DbHasProperty(db, 1, DB_SchemaLoaded) ){
- rc = sqlite3InitOne(db, 1, pzErrMsg);
- if( rc ){
- sqlite3ResetOneSchema(db, 1);
+ /* All other schemas after the main schema. The "temp" schema must be last */
+ for(i=db->nDb-1; i>0; i--){
+ if( !DbHasProperty(db, i, DB_SchemaLoaded) ){
+ rc = sqlite3InitOne(db, i, pzErrMsg);
+ if( rc ) return rc;
}
}
-#endif
-
- db->init.busy = 0;
- if( rc==SQLITE_OK && commit_internal ){
+ if( commit_internal ){
sqlite3CommitInternalChanges(db);
}
-
- return rc;
+ return SQLITE_OK;
}
/*
if( !sqlite3BtreeIsInReadTrans(pBt) ){
rc = sqlite3BtreeBeginTrans(pBt, 0);
if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
if( rc!=SQLITE_OK ) return;
openedTransaction = 1;
*/
assert( sqlite3_mutex_held(db->mutex) );
if( pSchema ){
- for(i=0; ALWAYS(i<db->nDb); i++){
+ for(i=0; 1; i++){
+ assert( i<db->nDb );
if( db->aDb[i].pSchema==pSchema ){
break;
}
** Free all memory allocations in the pParse object
*/
SQLITE_PRIVATE void sqlite3ParserReset(Parse *pParse){
- if( pParse ){
- sqlite3 *db = pParse->db;
- sqlite3DbFree(db, pParse->aLabel);
- sqlite3ExprListDelete(db, pParse->pConstExpr);
+ sqlite3 *db = pParse->db;
+ sqlite3DbFree(db, pParse->aLabel);
+ sqlite3ExprListDelete(db, pParse->pConstExpr);
+ if( db ){
+ assert( db->lookaside.bDisable >= pParse->disableLookaside );
+ db->lookaside.bDisable -= pParse->disableLookaside;
}
+ pParse->disableLookaside = 0;
}
/*
sqlite3 *db, /* Database handle. */
const char *zSql, /* UTF-8 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
- int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */
+ u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */
Vdbe *pReprepare, /* VM being reprepared */
sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */
const char **pzTail /* OUT: End of parsed string */
){
- Parse *pParse; /* Parsing context */
char *zErrMsg = 0; /* Error message */
int rc = SQLITE_OK; /* Result code */
int i; /* Loop counter */
+ Parse sParse; /* Parsing context */
- /* Allocate the parsing context */
- pParse = sqlite3StackAllocZero(db, sizeof(*pParse));
- if( pParse==0 ){
- rc = SQLITE_NOMEM;
- goto end_prepare;
- }
- pParse->pReprepare = pReprepare;
+ memset(&sParse, 0, PARSE_HDR_SZ);
+ memset(PARSE_TAIL(&sParse), 0, PARSE_TAIL_SZ);
+ sParse.pReprepare = pReprepare;
assert( ppStmt && *ppStmt==0 );
- assert( !db->mallocFailed );
+ /* assert( !db->mallocFailed ); // not true with SQLITE_USE_ALLOCA */
assert( sqlite3_mutex_held(db->mutex) );
+ /* For a long-term use prepared statement avoid the use of
+ ** lookaside memory.
+ */
+ if( prepFlags & SQLITE_PREPARE_PERSISTENT ){
+ sParse.disableLookaside++;
+ db->lookaside.bDisable++;
+ }
+
/* Check to verify that it is possible to get a read lock on all
** database schemas. The inability to get a read lock indicates that
** some other database connection is holding a write-lock, which in
assert( sqlite3BtreeHoldsMutex(pBt) );
rc = sqlite3BtreeSchemaLocked(pBt);
if( rc ){
- const char *zDb = db->aDb[i].zName;
+ const char *zDb = db->aDb[i].zDbSName;
sqlite3ErrorWithMsg(db, rc, "database schema is locked: %s", zDb);
- testcase( db->flags & SQLITE_ReadUncommitted );
+ testcase( db->flags & SQLITE_ReadUncommit );
goto end_prepare;
}
}
sqlite3VtabUnlockList(db);
- pParse->db = db;
- pParse->nQueryLoop = 0; /* Logarithmic, so 0 really means 1 */
+ sParse.db = db;
if( nBytes>=0 && (nBytes==0 || zSql[nBytes-1]!=0) ){
char *zSqlCopy;
int mxLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH];
}
zSqlCopy = sqlite3DbStrNDup(db, zSql, nBytes);
if( zSqlCopy ){
- sqlite3RunParser(pParse, zSqlCopy, &zErrMsg);
+ sqlite3RunParser(&sParse, zSqlCopy, &zErrMsg);
+ sParse.zTail = &zSql[sParse.zTail-zSqlCopy];
sqlite3DbFree(db, zSqlCopy);
- pParse->zTail = &zSql[pParse->zTail-zSqlCopy];
}else{
- pParse->zTail = &zSql[nBytes];
+ sParse.zTail = &zSql[nBytes];
}
}else{
- sqlite3RunParser(pParse, zSql, &zErrMsg);
+ sqlite3RunParser(&sParse, zSql, &zErrMsg);
}
- assert( 0==pParse->nQueryLoop );
+ assert( 0==sParse.nQueryLoop );
- if( db->mallocFailed ){
- pParse->rc = SQLITE_NOMEM;
- }
- if( pParse->rc==SQLITE_DONE ) pParse->rc = SQLITE_OK;
- if( pParse->checkSchema ){
- schemaIsValid(pParse);
+ if( sParse.rc==SQLITE_DONE ) sParse.rc = SQLITE_OK;
+ if( sParse.checkSchema ){
+ schemaIsValid(&sParse);
}
if( db->mallocFailed ){
- pParse->rc = SQLITE_NOMEM;
+ sParse.rc = SQLITE_NOMEM_BKPT;
}
if( pzTail ){
- *pzTail = pParse->zTail;
+ *pzTail = sParse.zTail;
}
- rc = pParse->rc;
+ rc = sParse.rc;
#ifndef SQLITE_OMIT_EXPLAIN
- if( rc==SQLITE_OK && pParse->pVdbe && pParse->explain ){
+ if( rc==SQLITE_OK && sParse.pVdbe && sParse.explain ){
static const char * const azColName[] = {
"addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment",
"selectid", "order", "from", "detail"
};
int iFirst, mx;
- if( pParse->explain==2 ){
- sqlite3VdbeSetNumCols(pParse->pVdbe, 4);
+ if( sParse.explain==2 ){
+ sqlite3VdbeSetNumCols(sParse.pVdbe, 4);
iFirst = 8;
mx = 12;
}else{
- sqlite3VdbeSetNumCols(pParse->pVdbe, 8);
+ sqlite3VdbeSetNumCols(sParse.pVdbe, 8);
iFirst = 0;
mx = 8;
}
for(i=iFirst; i<mx; i++){
- sqlite3VdbeSetColName(pParse->pVdbe, i-iFirst, COLNAME_NAME,
+ sqlite3VdbeSetColName(sParse.pVdbe, i-iFirst, COLNAME_NAME,
azColName[i], SQLITE_STATIC);
}
}
#endif
if( db->init.busy==0 ){
- Vdbe *pVdbe = pParse->pVdbe;
- sqlite3VdbeSetSql(pVdbe, zSql, (int)(pParse->zTail-zSql), saveSqlFlag);
+ sqlite3VdbeSetSql(sParse.pVdbe, zSql, (int)(sParse.zTail-zSql), prepFlags);
}
- if( pParse->pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){
- sqlite3VdbeFinalize(pParse->pVdbe);
+ if( sParse.pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){
+ sqlite3VdbeFinalize(sParse.pVdbe);
assert(!(*ppStmt));
}else{
- *ppStmt = (sqlite3_stmt*)pParse->pVdbe;
+ *ppStmt = (sqlite3_stmt*)sParse.pVdbe;
}
if( zErrMsg ){
}
/* Delete any TriggerPrg structures allocated while parsing this statement. */
- while( pParse->pTriggerPrg ){
- TriggerPrg *pT = pParse->pTriggerPrg;
- pParse->pTriggerPrg = pT->pNext;
+ while( sParse.pTriggerPrg ){
+ TriggerPrg *pT = sParse.pTriggerPrg;
+ sParse.pTriggerPrg = pT->pNext;
sqlite3DbFree(db, pT);
}
end_prepare:
- sqlite3ParserReset(pParse);
- sqlite3StackFree(db, pParse);
- rc = sqlite3ApiExit(db, rc);
- assert( (rc&db->errMask)==rc );
+ sqlite3ParserReset(&sParse);
return rc;
}
static int sqlite3LockAndPrepare(
sqlite3 *db, /* Database handle. */
const char *zSql, /* UTF-8 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
- int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */
+ u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */
Vdbe *pOld, /* VM being reprepared */
sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */
const char **pzTail /* OUT: End of parsed string */
){
int rc;
+ int cnt = 0;
#ifdef SQLITE_ENABLE_API_ARMOR
if( ppStmt==0 ) return SQLITE_MISUSE_BKPT;
}
sqlite3_mutex_enter(db->mutex);
sqlite3BtreeEnterAll(db);
- rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail);
- if( rc==SQLITE_SCHEMA ){
- sqlite3_finalize(*ppStmt);
- rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail);
- }
+ do{
+ /* Make multiple attempts to compile the SQL, until it either succeeds
+ ** or encounters a permanent error. A schema problem after one schema
+ ** reset is considered a permanent error. */
+ rc = sqlite3Prepare(db, zSql, nBytes, prepFlags, pOld, ppStmt, pzTail);
+ assert( rc==SQLITE_OK || *ppStmt==0 );
+ }while( rc==SQLITE_ERROR_RETRY
+ || (rc==SQLITE_SCHEMA && (sqlite3ResetOneSchema(db,-1), cnt++)==0) );
sqlite3BtreeLeaveAll(db);
+ rc = sqlite3ApiExit(db, rc);
+ assert( (rc&db->errMask)==rc );
sqlite3_mutex_leave(db->mutex);
- assert( rc==SQLITE_OK || *ppStmt==0 );
return rc;
}
sqlite3_stmt *pNew;
const char *zSql;
sqlite3 *db;
+ u8 prepFlags;
assert( sqlite3_mutex_held(sqlite3VdbeDb(p)->mutex) );
zSql = sqlite3_sql((sqlite3_stmt *)p);
assert( zSql!=0 ); /* Reprepare only called for prepare_v2() statements */
db = sqlite3VdbeDb(p);
assert( sqlite3_mutex_held(db->mutex) );
- rc = sqlite3LockAndPrepare(db, zSql, -1, 0, p, &pNew, 0);
+ prepFlags = sqlite3VdbePrepareFlags(p);
+ rc = sqlite3LockAndPrepare(db, zSql, -1, prepFlags, p, &pNew, 0);
if( rc ){
if( rc==SQLITE_NOMEM ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
assert( pNew==0 );
return rc;
** and the statement is automatically recompiled if an schema change
** occurs.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
sqlite3 *db, /* Database handle. */
const char *zSql, /* UTF-8 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
sqlite3 *db, /* Database handle. */
const char *zSql, /* UTF-8 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
const char **pzTail /* OUT: End of parsed string */
){
int rc;
- rc = sqlite3LockAndPrepare(db,zSql,nBytes,1,0,ppStmt,pzTail);
- assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */
+ /* EVIDENCE-OF: R-37923-12173 The sqlite3_prepare_v2() interface works
+ ** exactly the same as sqlite3_prepare_v3() with a zero prepFlags
+ ** parameter.
+ **
+ ** Proof in that the 5th parameter to sqlite3LockAndPrepare is 0 */
+ rc = sqlite3LockAndPrepare(db,zSql,nBytes,SQLITE_PREPARE_SAVESQL,0,
+ ppStmt,pzTail);
+ assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 );
+ return rc;
+}
+SQLITE_API int sqlite3_prepare_v3(
+ sqlite3 *db, /* Database handle. */
+ const char *zSql, /* UTF-8 encoded SQL statement. */
+ int nBytes, /* Length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_* flags */
+ sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */
+ const char **pzTail /* OUT: End of parsed string */
+){
+ int rc;
+ /* EVIDENCE-OF: R-56861-42673 sqlite3_prepare_v3() differs from
+ ** sqlite3_prepare_v2() only in having the extra prepFlags parameter,
+ ** which is a bit array consisting of zero or more of the
+ ** SQLITE_PREPARE_* flags.
+ **
+ ** Proof by comparison to the implementation of sqlite3_prepare_v2()
+ ** directly above. */
+ rc = sqlite3LockAndPrepare(db,zSql,nBytes,
+ SQLITE_PREPARE_SAVESQL|(prepFlags&SQLITE_PREPARE_MASK),
+ 0,ppStmt,pzTail);
+ assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 );
return rc;
}
sqlite3 *db, /* Database handle. */
const void *zSql, /* UTF-16 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
- int saveSqlFlag, /* True to save SQL text into the sqlite3_stmt */
+ u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */
sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */
const void **pzTail /* OUT: End of parsed string */
){
sqlite3_mutex_enter(db->mutex);
zSql8 = sqlite3Utf16to8(db, zSql, nBytes, SQLITE_UTF16NATIVE);
if( zSql8 ){
- rc = sqlite3LockAndPrepare(db, zSql8, -1, saveSqlFlag, 0, ppStmt, &zTail8);
+ rc = sqlite3LockAndPrepare(db, zSql8, -1, prepFlags, 0, ppStmt, &zTail8);
}
if( zTail8 && pzTail ){
** and the statement is automatically recompiled if an schema change
** occurs.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
sqlite3 *db, /* Database handle. */
const void *zSql, /* UTF-16 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */
return rc;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
sqlite3 *db, /* Database handle. */
const void *zSql, /* UTF-16 encoded SQL statement. */
int nBytes, /* Length of zSql in bytes. */
const void **pzTail /* OUT: End of parsed string */
){
int rc;
- rc = sqlite3Prepare16(db,zSql,nBytes,1,ppStmt,pzTail);
+ rc = sqlite3Prepare16(db,zSql,nBytes,SQLITE_PREPARE_SAVESQL,ppStmt,pzTail);
+ assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */
+ return rc;
+}
+SQLITE_API int sqlite3_prepare16_v3(
+ sqlite3 *db, /* Database handle. */
+ const void *zSql, /* UTF-16 encoded SQL statement. */
+ int nBytes, /* Length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_* flags */
+ sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */
+ const void **pzTail /* OUT: End of parsed string */
+){
+ int rc;
+ rc = sqlite3Prepare16(db,zSql,nBytes,
+ SQLITE_PREPARE_SAVESQL|(prepFlags&SQLITE_PREPARE_MASK),
+ ppStmt,pzTail);
assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */
return rc;
}
/***/ int sqlite3SelectTrace = 0;
# define SELECTTRACE(K,P,S,X) \
if(sqlite3SelectTrace&(K)) \
- sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",\
- (S)->zSelName,(S)),\
+ sqlite3DebugPrintf("%s/%p: ",(S)->zSelName,(S)),\
sqlite3DebugPrintf X
#else
# define SELECTTRACE(K,P,S,X)
int regReturn; /* Register holding block-output return address */
int labelBkOut; /* Start label for the block-output subroutine */
int addrSortIndex; /* Address of the OP_SorterOpen or OP_OpenEphemeral */
+ int labelDone; /* Jump here when done, ex: LIMIT reached */
u8 sortFlags; /* Zero or more SORTFLAG_* bits */
+ u8 bOrderedInnerLoop; /* ORDER BY correctly sorts the inner loop */
};
#define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */
sqlite3ExprDelete(db, p->pHaving);
sqlite3ExprListDelete(db, p->pOrderBy);
sqlite3ExprDelete(db, p->pLimit);
- sqlite3ExprDelete(db, p->pOffset);
- sqlite3WithDelete(db, p->pWith);
- if( bFree ) sqlite3DbFree(db, p);
+ if( OK_IF_ALWAYS_TRUE(p->pWith) ) sqlite3WithDelete(db, p->pWith);
+ if( bFree ) sqlite3DbFreeNN(db, p);
p = pPrior;
bFree = 1;
}
SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){
pDest->eDest = (u8)eDest;
pDest->iSDParm = iParm;
- pDest->affSdst = 0;
+ pDest->zAffSdst = 0;
pDest->iSdst = 0;
pDest->nSdst = 0;
}
ExprList *pGroupBy, /* the GROUP BY clause */
Expr *pHaving, /* the HAVING clause */
ExprList *pOrderBy, /* the ORDER BY clause */
- u16 selFlags, /* Flag parameters, such as SF_Distinct */
- Expr *pLimit, /* LIMIT value. NULL means not used */
- Expr *pOffset /* OFFSET value. NULL means no offset */
+ u32 selFlags, /* Flag parameters, such as SF_Distinct */
+ Expr *pLimit /* LIMIT value. NULL means not used */
){
Select *pNew;
Select standin;
- sqlite3 *db = pParse->db;
- pNew = sqlite3DbMallocZero(db, sizeof(*pNew) );
+ pNew = sqlite3DbMallocRawNN(pParse->db, sizeof(*pNew) );
if( pNew==0 ){
- assert( db->mallocFailed );
+ assert( pParse->db->mallocFailed );
pNew = &standin;
- memset(pNew, 0, sizeof(*pNew));
}
if( pEList==0 ){
- pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ALL,0));
+ pEList = sqlite3ExprListAppend(pParse, 0,
+ sqlite3Expr(pParse->db,TK_ASTERISK,0));
}
pNew->pEList = pEList;
- if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc));
+ pNew->op = TK_SELECT;
+ pNew->selFlags = selFlags;
+ pNew->iLimit = 0;
+ pNew->iOffset = 0;
+#if SELECTTRACE_ENABLED
+ pNew->zSelName[0] = 0;
+#endif
+ pNew->addrOpenEphm[0] = -1;
+ pNew->addrOpenEphm[1] = -1;
+ pNew->nSelectRow = 0;
+ if( pSrc==0 ) pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*pSrc));
pNew->pSrc = pSrc;
pNew->pWhere = pWhere;
pNew->pGroupBy = pGroupBy;
pNew->pHaving = pHaving;
pNew->pOrderBy = pOrderBy;
- pNew->selFlags = selFlags;
- pNew->op = TK_SELECT;
+ pNew->pPrior = 0;
+ pNew->pNext = 0;
pNew->pLimit = pLimit;
- pNew->pOffset = pOffset;
- assert( pOffset==0 || pLimit!=0 || pParse->nErr>0 || db->mallocFailed!=0 );
- pNew->addrOpenEphm[0] = -1;
- pNew->addrOpenEphm[1] = -1;
- if( db->mallocFailed ) {
- clearSelect(db, pNew, pNew!=&standin);
+ pNew->pWith = 0;
+ if( pParse->db->mallocFailed ) {
+ clearSelect(pParse->db, pNew, pNew!=&standin);
pNew = 0;
}else{
assert( pNew->pSrc!=0 || pParse->nErr>0 );
** Delete the given Select structure and all of its substructures.
*/
SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){
- clearSelect(db, p, 1);
+ if( OK_IF_ALWAYS_TRUE(p) ) clearSelect(db, p, 1);
}
/*
pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft);
pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight);
- pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2, 0);
+ pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2);
if( pEq && isOuterJoin ){
ExprSetProperty(pEq, EP_FromJoin);
assert( !ExprHasProperty(pEq, EP_TokenOnly|EP_Reduced) );
}
}
+/* Undo the work of setJoinExpr(). In the expression tree p, convert every
+** term that is marked with EP_FromJoin and iRightJoinTable==iTable into
+** an ordinary term that omits the EP_FromJoin mark.
+**
+** This happens when a LEFT JOIN is simplified into an ordinary JOIN.
+*/
+static void unsetJoinExpr(Expr *p, int iTable){
+ while( p ){
+ if( ExprHasProperty(p, EP_FromJoin)
+ && (iTable<0 || p->iRightJoinTable==iTable) ){
+ ExprClearProperty(p, EP_FromJoin);
+ }
+ if( p->op==TK_FUNCTION && p->x.pList ){
+ int i;
+ for(i=0; i<p->x.pList->nExpr; i++){
+ unsetJoinExpr(p->x.pList->a[i].pExpr, iTable);
+ }
+ }
+ unsetJoinExpr(p->pLeft, iTable);
+ p = p->pRight;
+ }
+}
+
/*
** This routine processes the join information for a SELECT statement.
** ON and USING clauses are converted into extra terms of the WHERE clause.
pLeft = &pSrc->a[0];
pRight = &pLeft[1];
for(i=0; i<pSrc->nSrc-1; i++, pRight++, pLeft++){
- Table *pLeftTab = pLeft->pTab;
Table *pRightTab = pRight->pTab;
int isOuter;
- if( NEVER(pLeftTab==0 || pRightTab==0) ) continue;
+ if( NEVER(pLeft->pTab==0 || pRightTab==0) ) continue;
isOuter = (pRight->fg.jointype & JT_OUTER)!=0;
/* When the NATURAL keyword is present, add WHERE clause terms for
int regRecord = ++pParse->nMem; /* Assembled sorter record */
int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */
int op; /* Opcode to add sorter record to sorter */
+ int iLimit; /* LIMIT counter */
assert( bSeq==0 || bSeq==1 );
- assert( nData==1 || regData==regOrigData );
+ assert( nData==1 || regData==regOrigData || regOrigData==0 );
if( nPrefixReg ){
assert( nPrefixReg==nExpr+bSeq );
regBase = regData - nExpr - bSeq;
regBase = pParse->nMem + 1;
pParse->nMem += nBase;
}
+ assert( pSelect->iOffset==0 || pSelect->iLimit!=0 );
+ iLimit = pSelect->iOffset ? pSelect->iOffset+1 : pSelect->iLimit;
+ pSort->labelDone = sqlite3VdbeMakeLabel(v);
sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, regOrigData,
- SQLITE_ECEL_DUP|SQLITE_ECEL_REF);
+ SQLITE_ECEL_DUP | (regOrigData? SQLITE_ECEL_REF : 0));
if( bSeq ){
sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr);
}
- if( nPrefixReg==0 ){
+ if( nPrefixReg==0 && nData>0 ){
sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData);
}
-
sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord);
if( nOBSat>0 ){
int regPrevKey; /* The first nOBSat columns of the previous row */
if( pParse->db->mallocFailed ) return;
pOp->p2 = nKey + nData;
pKI = pOp->p4.pKeyInfo;
- memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */
+ memset(pKI->aSortOrder, 0, pKI->nKeyField); /* Makes OP_Jump testable */
sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO);
- testcase( pKI->nXField>2 );
+ testcase( pKI->nAllField > pKI->nKeyField+2 );
pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat,
- pKI->nXField-1);
+ pKI->nAllField-pKI->nKeyField-1);
addrJmp = sqlite3VdbeCurrentAddr(v);
sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v);
pSort->labelBkOut = sqlite3VdbeMakeLabel(v);
pSort->regReturn = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor);
+ if( iLimit ){
+ sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, pSort->labelDone);
+ VdbeCoverage(v);
+ }
sqlite3VdbeJumpHere(v, addrFirst);
sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat);
sqlite3VdbeJumpHere(v, addrJmp);
}else{
op = OP_IdxInsert;
}
- sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord);
- if( pSelect->iLimit ){
+ sqlite3VdbeAddOp4Int(v, op, pSort->iECursor, regRecord,
+ regBase+nOBSat, nBase-nOBSat);
+ if( iLimit ){
int addr;
- int iLimit;
- if( pSelect->iOffset ){
- iLimit = pSelect->iOffset+1;
- }else{
- iLimit = pSelect->iLimit;
- }
- addr = sqlite3VdbeAddOp3(v, OP_IfNotZero, iLimit, 0, 1); VdbeCoverage(v);
+ int r1 = 0;
+ /* Fill the sorter until it contains LIMIT+OFFSET entries. (The iLimit
+ ** register is initialized with value of LIMIT+OFFSET.) After the sorter
+ ** fills up, delete the least entry in the sorter after each insert.
+ ** Thus we never hold more than the LIMIT+OFFSET rows in memory at once */
+ addr = sqlite3VdbeAddOp1(v, OP_IfNotZero, iLimit); VdbeCoverage(v);
sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor);
+ if( pSort->bOrderedInnerLoop ){
+ r1 = ++pParse->nMem;
+ sqlite3VdbeAddOp3(v, OP_Column, pSort->iECursor, nExpr, r1);
+ VdbeComment((v, "seq"));
+ }
sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor);
+ if( pSort->bOrderedInnerLoop ){
+ /* If the inner loop is driven by an index such that values from
+ ** the same iteration of the inner loop are in sorted order, then
+ ** immediately jump to the next iteration of an inner loop if the
+ ** entry from the current iteration does not fit into the top
+ ** LIMIT+OFFSET entries of the sorter. */
+ int iBrk = sqlite3VdbeCurrentAddr(v) + 2;
+ sqlite3VdbeAddOp3(v, OP_Eq, regBase+nExpr, iBrk, r1);
+ sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
+ VdbeCoverage(v);
+ }
sqlite3VdbeJumpHere(v, addr);
}
}
r1 = sqlite3GetTempReg(pParse);
sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iTab, r1);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iTab, r1, iMem, N);
+ sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
sqlite3ReleaseTempReg(pParse, r1);
}
-#ifndef SQLITE_OMIT_SUBQUERY
-/*
-** Generate an error message when a SELECT is used within a subexpression
-** (example: "a IN (SELECT * FROM table)") but it has more than 1 result
-** column. We do this in a subroutine because the error used to occur
-** in multiple places. (The error only occurs in one place now, but we
-** retain the subroutine to minimize code disruption.)
-*/
-static int checkForMultiColumnSelectError(
- Parse *pParse, /* Parse context. */
- SelectDest *pDest, /* Destination of SELECT results */
- int nExpr /* Number of result columns returned by SELECT */
-){
- int eDest = pDest->eDest;
- if( nExpr>1 && (eDest==SRT_Mem || eDest==SRT_Set) ){
- sqlite3ErrorMsg(pParse, "only a single result allowed for "
- "a SELECT that is part of an expression");
- return 1;
- }else{
- return 0;
- }
-}
-#endif
-
/*
** This routine generates the code for the inside of the inner loop
** of a SELECT.
**
-** If srcTab is negative, then the pEList expressions
+** If srcTab is negative, then the p->pEList expressions
** are evaluated in order to get the data for this row. If srcTab is
-** zero or more, then data is pulled from srcTab and pEList is used only
-** to get number columns and the datatype for each column.
+** zero or more, then data is pulled from srcTab and p->pEList is used only
+** to get the number of columns and the collation sequence for each column.
*/
static void selectInnerLoop(
Parse *pParse, /* The parser context */
Select *p, /* The complete select statement being coded */
- ExprList *pEList, /* List of values being extracted */
- int srcTab, /* Pull data from this table */
+ int srcTab, /* Pull data from this table if non-negative */
SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */
DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */
SelectDest *pDest, /* How to dispose of the results */
){
Vdbe *v = pParse->pVdbe;
int i;
- int hasDistinct; /* True if the DISTINCT keyword is present */
- int regResult; /* Start of memory holding result set */
+ int hasDistinct; /* True if the DISTINCT keyword is present */
int eDest = pDest->eDest; /* How to dispose of results */
int iParm = pDest->iSDParm; /* First argument to disposal method */
int nResultCol; /* Number of result columns */
int nPrefixReg = 0; /* Number of extra registers before regResult */
+ /* Usually, regResult is the first cell in an array of memory cells
+ ** containing the current result row. In this case regOrig is set to the
+ ** same value. However, if the results are being sent to the sorter, the
+ ** values for any expressions that are also part of the sort-key are omitted
+ ** from this array. In this case regOrig is set to zero. */
+ int regResult; /* Start of memory holding current results */
+ int regOrig; /* Start of memory holding full result (or 0) */
+
assert( v );
- assert( pEList!=0 );
+ assert( p->pEList!=0 );
hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP;
if( pSort && pSort->pOrderBy==0 ) pSort = 0;
if( pSort==0 && !hasDistinct ){
/* Pull the requested columns.
*/
- nResultCol = pEList->nExpr;
+ nResultCol = p->pEList->nExpr;
if( pDest->iSdst==0 ){
if( pSort ){
pParse->nMem += nResultCol;
}
pDest->nSdst = nResultCol;
- regResult = pDest->iSdst;
+ regOrig = regResult = pDest->iSdst;
if( srcTab>=0 ){
for(i=0; i<nResultCol; i++){
sqlite3VdbeAddOp3(v, OP_Column, srcTab, i, regResult+i);
- VdbeComment((v, "%s", pEList->a[i].zName));
+ VdbeComment((v, "%s", p->pEList->a[i].zName));
}
}else if( eDest!=SRT_Exists ){
/* If the destination is an EXISTS(...) expression, the actual
}else{
ecelFlags = 0;
}
- sqlite3ExprCodeExprList(pParse, pEList, regResult, 0, ecelFlags);
+ if( pSort && hasDistinct==0 && eDest!=SRT_EphemTab && eDest!=SRT_Table ){
+ /* For each expression in p->pEList that is a copy of an expression in
+ ** the ORDER BY clause (pSort->pOrderBy), set the associated
+ ** iOrderByCol value to one more than the index of the ORDER BY
+ ** expression within the sort-key that pushOntoSorter() will generate.
+ ** This allows the p->pEList field to be omitted from the sorted record,
+ ** saving space and CPU cycles. */
+ ecelFlags |= (SQLITE_ECEL_OMITREF|SQLITE_ECEL_REF);
+ for(i=pSort->nOBSat; i<pSort->pOrderBy->nExpr; i++){
+ int j;
+ if( (j = pSort->pOrderBy->a[i].u.x.iOrderByCol)>0 ){
+ p->pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat;
+ }
+ }
+ regOrig = 0;
+ assert( eDest==SRT_Set || eDest==SRT_Mem
+ || eDest==SRT_Coroutine || eDest==SRT_Output );
+ }
+ nResultCol = sqlite3ExprCodeExprList(pParse,p->pEList,regResult,
+ 0,ecelFlags);
}
/* If the DISTINCT keyword was present on the SELECT statement
iJump = sqlite3VdbeCurrentAddr(v) + nResultCol;
for(i=0; i<nResultCol; i++){
- CollSeq *pColl = sqlite3ExprCollSeq(pParse, pEList->a[i].pExpr);
+ CollSeq *pColl = sqlite3ExprCollSeq(pParse, p->pEList->a[i].pExpr);
if( i<nResultCol-1 ){
sqlite3VdbeAddOp3(v, OP_Ne, regResult+i, iJump, regPrev+i);
VdbeCoverage(v);
int r1;
r1 = sqlite3GetTempReg(pParse);
sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol);
sqlite3ReleaseTempReg(pParse, r1);
break;
}
int addr = sqlite3VdbeCurrentAddr(v) + 4;
sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0);
VdbeCoverage(v);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm+1, r1,regResult,nResultCol);
assert( pSort==0 );
}
#endif
** item into the set table with bogus data.
*/
case SRT_Set: {
- assert( nResultCol==1 );
- pDest->affSdst =
- sqlite3CompareAffinity(pEList->a[0].pExpr, pDest->affSdst);
if( pSort ){
/* At first glance you would think we could optimize out the
** ORDER BY in this case since the order of entries in the set
** does not matter. But there might be a LIMIT clause, in which
** case the order does matter */
- pushOntoSorter(pParse, pSort, p, regResult, regResult, 1, nPrefixReg);
+ pushOntoSorter(
+ pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg);
}else{
int r1 = sqlite3GetTempReg(pParse);
- sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult,1,r1, &pDest->affSdst, 1);
- sqlite3ExprCacheAffinityChange(pParse, regResult, 1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
+ assert( sqlite3Strlen30(pDest->zAffSdst)==nResultCol );
+ sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol,
+ r1, pDest->zAffSdst, nResultCol);
+ sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol);
sqlite3ReleaseTempReg(pParse, r1);
}
break;
}
/* If this is a scalar select that is part of an expression, then
- ** store the results in the appropriate memory cell and break out
- ** of the scan loop.
+ ** store the results in the appropriate memory cell or array of
+ ** memory cells and break out of the scan loop.
*/
case SRT_Mem: {
- assert( nResultCol==1 );
if( pSort ){
- pushOntoSorter(pParse, pSort, p, regResult, regResult, 1, nPrefixReg);
+ assert( nResultCol<=pDest->nSdst );
+ pushOntoSorter(
+ pParse, pSort, p, regResult, regOrig, nResultCol, nPrefixReg);
}else{
+ assert( nResultCol==pDest->nSdst );
assert( regResult==iParm );
/* The LIMIT clause will jump out of the loop for us */
}
testcase( eDest==SRT_Coroutine );
testcase( eDest==SRT_Output );
if( pSort ){
- pushOntoSorter(pParse, pSort, p, regResult, regResult, nResultCol,
+ pushOntoSorter(pParse, pSort, p, regResult, regOrig, nResultCol,
nPrefixReg);
}else if( eDest==SRT_Coroutine ){
sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm);
}
sqlite3VdbeAddOp2(v, OP_Sequence, iParm, r2+nKey);
sqlite3VdbeAddOp3(v, OP_MakeRecord, r2, nKey+2, r1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, r2, nKey+2);
if( addrTest ) sqlite3VdbeJumpHere(v, addrTest);
sqlite3ReleaseTempReg(pParse, r1);
sqlite3ReleaseTempRange(pParse, r2, nKey+2);
** X extra columns.
*/
SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){
- KeyInfo *p = sqlite3DbMallocZero(0,
- sizeof(KeyInfo) + (N+X)*(sizeof(CollSeq*)+1));
+ int nExtra = (N+X)*(sizeof(CollSeq*)+1) - sizeof(CollSeq*);
+ KeyInfo *p = sqlite3DbMallocRawNN(db, sizeof(KeyInfo) + nExtra);
if( p ){
p->aSortOrder = (u8*)&p->aColl[N+X];
- p->nField = (u16)N;
- p->nXField = (u16)X;
+ p->nKeyField = (u16)N;
+ p->nAllField = (u16)(N+X);
p->enc = ENC(db);
p->db = db;
p->nRef = 1;
+ memset(&p[1], 0, nExtra);
}else{
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}
return p;
}
if( p ){
assert( p->nRef>0 );
p->nRef--;
- if( p->nRef==0 ) sqlite3DbFree(0, p);
+ if( p->nRef==0 ) sqlite3DbFreeNN(p->db, p);
}
}
if( pInfo ){
assert( sqlite3KeyInfoIsWriteable(pInfo) );
for(i=iStart, pItem=pList->a+iStart; i<nExpr; i++, pItem++){
- CollSeq *pColl;
- pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr);
- if( !pColl ) pColl = db->pDfltColl;
- pInfo->aColl[i-iStart] = pColl;
+ pInfo->aColl[i-iStart] = sqlite3ExprNNCollSeq(pParse, pItem->pExpr);
pInfo->aSortOrder[i-iStart] = pItem->sortOrder;
}
}
SelectDest *pDest /* Write the sorted results here */
){
Vdbe *v = pParse->pVdbe; /* The prepared statement */
- int addrBreak = sqlite3VdbeMakeLabel(v); /* Jump here to exit loop */
+ int addrBreak = pSort->labelDone; /* Jump here to exit loop */
int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */
int addr;
int addrOnce = 0;
int iParm = pDest->iSDParm;
int regRow;
int regRowid;
+ int iCol;
int nKey;
int iSortTab; /* Sorter cursor to read from */
int nSortData; /* Trailing values to read from sorter */
int i;
int bSeq; /* True if sorter record includes seq. no. */
-#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
struct ExprList_item *aOutEx = p->pEList->a;
-#endif
+ assert( addrBreak<0 );
if( pSort->labelBkOut ){
sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
sqlite3VdbeGoto(v, addrBreak);
sqlite3VdbeResolveLabel(v, pSort->labelBkOut);
}
iTab = pSort->iECursor;
- if( eDest==SRT_Output || eDest==SRT_Coroutine ){
+ if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){
regRowid = 0;
regRow = pDest->iSdst;
nSortData = nColumn;
}else{
regRowid = sqlite3GetTempReg(pParse);
- regRow = sqlite3GetTempReg(pParse);
- nSortData = 1;
+ regRow = sqlite3GetTempRange(pParse, nColumn);
+ nSortData = nColumn;
}
nKey = pOrderBy->nExpr - pSort->nOBSat;
if( pSort->sortFlags & SORTFLAG_UseSorter ){
int regSortOut = ++pParse->nMem;
iSortTab = pParse->nTab++;
if( pSort->labelBkOut ){
- addrOnce = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+ addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
}
sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData);
if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
iSortTab = iTab;
bSeq = 1;
}
- for(i=0; i<nSortData; i++){
- sqlite3VdbeAddOp3(v, OP_Column, iSortTab, nKey+bSeq+i, regRow+i);
+ for(i=0, iCol=nKey+bSeq-1; i<nSortData; i++){
+ if( aOutEx[i].u.x.iOrderByCol==0 ) iCol++;
+ }
+ for(i=nSortData-1; i>=0; i--){
+ int iRead;
+ if( aOutEx[i].u.x.iOrderByCol ){
+ iRead = aOutEx[i].u.x.iOrderByCol-1;
+ }else{
+ iRead = iCol--;
+ }
+ sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iRead, regRow+i);
VdbeComment((v, "%s", aOutEx[i].zName ? aOutEx[i].zName : aOutEx[i].zSpan));
}
switch( eDest ){
+ case SRT_Table:
case SRT_EphemTab: {
sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, iParm, regRow, regRowid);
}
#ifndef SQLITE_OMIT_SUBQUERY
case SRT_Set: {
- assert( nColumn==1 );
- sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, 1, regRowid,
- &pDest->affSdst, 1);
- sqlite3ExprCacheAffinityChange(pParse, regRow, 1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid);
+ assert( nColumn==sqlite3Strlen30(pDest->zAffSdst) );
+ sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, nColumn, regRowid,
+ pDest->zAffSdst, nColumn);
+ sqlite3ExprCacheAffinityChange(pParse, regRow, nColumn);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, regRowid, regRow, nColumn);
break;
}
case SRT_Mem: {
- assert( nColumn==1 );
- sqlite3ExprCodeMove(pParse, regRow, iParm, 1);
/* The LIMIT clause will terminate the loop for us */
break;
}
}
}
if( regRowid ){
- sqlite3ReleaseTempReg(pParse, regRow);
+ if( eDest==SRT_Set ){
+ sqlite3ReleaseTempRange(pParse, regRow, nColumn);
+ }else{
+ sqlite3ReleaseTempReg(pParse, regRow);
+ }
sqlite3ReleaseTempReg(pParse, regRowid);
}
/* The bottom of the loop
** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used.
*/
#ifdef SQLITE_ENABLE_COLUMN_METADATA
-# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,C,D,E,F)
+# define columnType(A,B,C,D,E) columnTypeImpl(A,B,C,D,E)
#else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */
-# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,F)
+# define columnType(A,B,C,D,E) columnTypeImpl(A,B)
#endif
static const char *columnTypeImpl(
NameContext *pNC,
+#ifndef SQLITE_ENABLE_COLUMN_METADATA
+ Expr *pExpr
+#else
Expr *pExpr,
-#ifdef SQLITE_ENABLE_COLUMN_METADATA
const char **pzOrigDb,
const char **pzOrigTab,
- const char **pzOrigCol,
+ const char **pzOrigCol
#endif
- u8 *pEstWidth
){
char const *zType = 0;
int j;
- u8 estWidth = 1;
#ifdef SQLITE_ENABLE_COLUMN_METADATA
char const *zOrigDb = 0;
char const *zOrigTab = 0;
char const *zOrigCol = 0;
#endif
- if( NEVER(pExpr==0) || pNC->pSrcList==0 ) return 0;
+ assert( pExpr!=0 );
+ assert( pNC->pSrcList!=0 );
+ assert( pExpr->op!=TK_AGG_COLUMN ); /* This routine runes before aggregates
+ ** are processed */
switch( pExpr->op ){
- case TK_AGG_COLUMN:
case TK_COLUMN: {
/* The expression is a column. Locate the table the column is being
** extracted from in NameContext.pSrcList. This table may be real
Table *pTab = 0; /* Table structure column is extracted from */
Select *pS = 0; /* Select the column is extracted from */
int iCol = pExpr->iColumn; /* Index of column in pTab */
- testcase( pExpr->op==TK_AGG_COLUMN );
- testcase( pExpr->op==TK_COLUMN );
while( pNC && !pTab ){
SrcList *pTabList = pNC->pSrcList;
for(j=0;j<pTabList->nSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++);
** of the SELECT statement. Return the declaration type and origin
** data for the result-set column of the sub-select.
*/
- if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){
+ if( iCol>=0 && iCol<pS->pEList->nExpr ){
/* If iCol is less than zero, then the expression requests the
** rowid of the sub-select or view. This expression is legal (see
** test case misc2.2.2) - it always evaluates to NULL.
- **
- ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been
- ** caught already by name resolution.
*/
NameContext sNC;
Expr *p = pS->pEList->a[iCol].pExpr;
sNC.pSrcList = pS->pSrc;
sNC.pNext = pNC;
sNC.pParse = pNC->pParse;
- zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth);
+ zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol);
}
- }else if( pTab->pSchema ){
- /* A real table */
+ }else{
+ /* A real table or a CTE table */
assert( !pS );
- if( iCol<0 ) iCol = pTab->iPKey;
- assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
#ifdef SQLITE_ENABLE_COLUMN_METADATA
+ if( iCol<0 ) iCol = pTab->iPKey;
+ assert( iCol==XN_ROWID || (iCol>=0 && iCol<pTab->nCol) );
if( iCol<0 ){
zType = "INTEGER";
zOrigCol = "rowid";
}else{
- zType = pTab->aCol[iCol].zType;
zOrigCol = pTab->aCol[iCol].zName;
- estWidth = pTab->aCol[iCol].szEst;
+ zType = sqlite3ColumnType(&pTab->aCol[iCol],0);
}
zOrigTab = pTab->zName;
- if( pNC->pParse ){
+ if( pNC->pParse && pTab->pSchema ){
int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema);
- zOrigDb = pNC->pParse->db->aDb[iDb].zName;
+ zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName;
}
#else
+ assert( iCol==XN_ROWID || (iCol>=0 && iCol<pTab->nCol) );
if( iCol<0 ){
zType = "INTEGER";
}else{
- zType = pTab->aCol[iCol].zType;
- estWidth = pTab->aCol[iCol].szEst;
+ zType = sqlite3ColumnType(&pTab->aCol[iCol],0);
}
#endif
}
sNC.pSrcList = pS->pSrc;
sNC.pNext = pNC;
sNC.pParse = pNC->pParse;
- zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, &estWidth);
+ zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol);
break;
}
#endif
*pzOrigCol = zOrigCol;
}
#endif
- if( pEstWidth ) *pEstWidth = estWidth;
return zType;
}
NameContext sNC;
sNC.pSrcList = pTabList;
sNC.pParse = pParse;
+ sNC.pNext = 0;
for(i=0; i<pEList->nExpr; i++){
Expr *p = pEList->a[i].pExpr;
const char *zType;
const char *zOrigDb = 0;
const char *zOrigTab = 0;
const char *zOrigCol = 0;
- zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, 0);
+ zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol);
/* The vdbe must make its own copy of the column-type and other
** column specific strings, in case the schema is reset before this
sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT);
sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT);
#else
- zType = columnType(&sNC, p, 0, 0, 0, 0);
+ zType = columnType(&sNC, p, 0, 0, 0);
#endif
sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT);
}
#endif /* !defined(SQLITE_OMIT_DECLTYPE) */
}
+
/*
-** Generate code that will tell the VDBE the names of columns
-** in the result set. This information is used to provide the
-** azCol[] values in the callback.
+** Compute the column names for a SELECT statement.
+**
+** The only guarantee that SQLite makes about column names is that if the
+** column has an AS clause assigning it a name, that will be the name used.
+** That is the only documented guarantee. However, countless applications
+** developed over the years have made baseless assumptions about column names
+** and will break if those assumptions changes. Hence, use extreme caution
+** when modifying this routine to avoid breaking legacy.
+**
+** See Also: sqlite3ColumnsFromExprList()
+**
+** The PRAGMA short_column_names and PRAGMA full_column_names settings are
+** deprecated. The default setting is short=ON, full=OFF. 99.9% of all
+** applications should operate this way. Nevertheless, we need to support the
+** other modes for legacy:
+**
+** short=OFF, full=OFF: Column name is the text of the expression has it
+** originally appears in the SELECT statement. In
+** other words, the zSpan of the result expression.
+**
+** short=ON, full=OFF: (This is the default setting). If the result
+** refers directly to a table column, then the
+** result column name is just the table column
+** name: COLUMN. Otherwise use zSpan.
+**
+** full=ON, short=ANY: If the result refers directly to a table column,
+** then the result column name with the table name
+** prefix, ex: TABLE.COLUMN. Otherwise use zSpan.
*/
static void generateColumnNames(
Parse *pParse, /* Parser context */
- SrcList *pTabList, /* List of tables */
- ExprList *pEList /* Expressions defining the result set */
+ Select *pSelect /* Generate column names for this SELECT statement */
){
Vdbe *v = pParse->pVdbe;
- int i, j;
+ int i;
+ Table *pTab;
+ SrcList *pTabList;
+ ExprList *pEList;
sqlite3 *db = pParse->db;
- int fullNames, shortNames;
+ int fullName; /* TABLE.COLUMN if no AS clause and is a direct table ref */
+ int srcName; /* COLUMN or TABLE.COLUMN if no AS clause and is direct */
#ifndef SQLITE_OMIT_EXPLAIN
/* If this is an EXPLAIN, skip this step */
}
#endif
- if( pParse->colNamesSet || NEVER(v==0) || db->mallocFailed ) return;
+ if( pParse->colNamesSet || db->mallocFailed ) return;
+ /* Column names are determined by the left-most term of a compound select */
+ while( pSelect->pPrior ) pSelect = pSelect->pPrior;
+ SELECTTRACE(1,pParse,pSelect,("generating column names\n"));
+ pTabList = pSelect->pSrc;
+ pEList = pSelect->pEList;
+ assert( v!=0 );
+ assert( pTabList!=0 );
pParse->colNamesSet = 1;
- fullNames = (db->flags & SQLITE_FullColNames)!=0;
- shortNames = (db->flags & SQLITE_ShortColNames)!=0;
+ fullName = (db->flags & SQLITE_FullColNames)!=0;
+ srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName;
sqlite3VdbeSetNumCols(v, pEList->nExpr);
for(i=0; i<pEList->nExpr; i++){
- Expr *p;
- p = pEList->a[i].pExpr;
- if( NEVER(p==0) ) continue;
+ Expr *p = pEList->a[i].pExpr;
+
+ assert( p!=0 );
+ assert( p->op!=TK_AGG_COLUMN ); /* Agg processing has not run yet */
+ assert( p->op!=TK_COLUMN || p->pTab!=0 ); /* Covering idx not yet coded */
if( pEList->a[i].zName ){
+ /* An AS clause always takes first priority */
char *zName = pEList->a[i].zName;
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT);
- }else if( (p->op==TK_COLUMN || p->op==TK_AGG_COLUMN) && pTabList ){
- Table *pTab;
+ }else if( srcName && p->op==TK_COLUMN ){
char *zCol;
int iCol = p->iColumn;
- for(j=0; ALWAYS(j<pTabList->nSrc); j++){
- if( pTabList->a[j].iCursor==p->iTable ) break;
- }
- assert( j<pTabList->nSrc );
- pTab = pTabList->a[j].pTab;
+ pTab = p->pTab;
+ assert( pTab!=0 );
if( iCol<0 ) iCol = pTab->iPKey;
assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
if( iCol<0 ){
}else{
zCol = pTab->aCol[iCol].zName;
}
- if( !shortNames && !fullNames ){
- sqlite3VdbeSetColName(v, i, COLNAME_NAME,
- sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC);
- }else if( fullNames ){
+ if( fullName ){
char *zName = 0;
zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol);
sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC);
**
** Return SQLITE_OK on success. If a memory allocation error occurs,
** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM.
+**
+** The only guarantee that SQLite makes about column names is that if the
+** column has an AS clause assigning it a name, that will be the name used.
+** That is the only documented guarantee. However, countless applications
+** developed over the years have made baseless assumptions about column names
+** and will break if those assumptions changes. Hence, use extreme caution
+** when modifying this routine to avoid breaking legacy.
+**
+** See Also: generateColumnNames()
*/
SQLITE_PRIVATE int sqlite3ColumnsFromExprList(
Parse *pParse, /* Parsing context */
){
sqlite3 *db = pParse->db; /* Database connection */
int i, j; /* Loop counters */
- int cnt; /* Index added to make the name unique */
+ u32 cnt; /* Index added to make the name unique */
Column *aCol, *pCol; /* For looping over result columns */
int nCol; /* Number of columns in the result set */
- Expr *p; /* Expression for a single result column */
char *zName; /* Column name */
int nName; /* Size of name in zName[] */
+ Hash ht; /* Hash table of column names */
+ sqlite3HashInit(&ht);
if( pEList ){
nCol = pEList->nExpr;
aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol);
testcase( aCol==0 );
+ if( nCol>32767 ) nCol = 32767;
}else{
nCol = 0;
aCol = 0;
}
+ assert( nCol==(i16)nCol );
*pnCol = nCol;
*paCol = aCol;
- for(i=0, pCol=aCol; i<nCol; i++, pCol++){
+ for(i=0, pCol=aCol; i<nCol && !db->mallocFailed; i++, pCol++){
/* Get an appropriate name for the column
*/
- p = sqlite3ExprSkipCollate(pEList->a[i].pExpr);
if( (zName = pEList->a[i].zName)!=0 ){
/* If the column contains an "AS <name>" phrase, use <name> as the name */
- zName = sqlite3DbStrDup(db, zName);
}else{
- Expr *pColExpr = p; /* The expression that is the result column name */
- Table *pTab; /* Table associated with this expression */
+ Expr *pColExpr = sqlite3ExprSkipCollate(pEList->a[i].pExpr);
while( pColExpr->op==TK_DOT ){
pColExpr = pColExpr->pRight;
assert( pColExpr!=0 );
}
- if( pColExpr->op==TK_COLUMN && ALWAYS(pColExpr->pTab!=0) ){
+ assert( pColExpr->op!=TK_AGG_COLUMN );
+ if( pColExpr->op==TK_COLUMN ){
/* For columns use the column name name */
int iCol = pColExpr->iColumn;
- pTab = pColExpr->pTab;
+ Table *pTab = pColExpr->pTab;
+ assert( pTab!=0 );
if( iCol<0 ) iCol = pTab->iPKey;
- zName = sqlite3MPrintf(db, "%s",
- iCol>=0 ? pTab->aCol[iCol].zName : "rowid");
+ zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid";
}else if( pColExpr->op==TK_ID ){
assert( !ExprHasProperty(pColExpr, EP_IntValue) );
- zName = sqlite3MPrintf(db, "%s", pColExpr->u.zToken);
+ zName = pColExpr->u.zToken;
}else{
/* Use the original text of the column expression as its name */
- zName = sqlite3MPrintf(db, "%s", pEList->a[i].zSpan);
+ zName = pEList->a[i].zSpan;
}
}
- if( db->mallocFailed ){
- sqlite3DbFree(db, zName);
- break;
+ if( zName ){
+ zName = sqlite3DbStrDup(db, zName);
+ }else{
+ zName = sqlite3MPrintf(db,"column%d",i+1);
}
/* Make sure the column name is unique. If the name is not unique,
** append an integer to the name so that it becomes unique.
*/
- nName = sqlite3Strlen30(zName);
- for(j=cnt=0; j<i; j++){
- if( sqlite3StrICmp(aCol[j].zName, zName)==0 ){
- char *zNewName;
- int k;
- for(k=nName-1; k>1 && sqlite3Isdigit(zName[k]); k--){}
- if( k>=0 && zName[k]==':' ) nName = k;
- zName[nName] = 0;
- zNewName = sqlite3MPrintf(db, "%s:%d", zName, ++cnt);
- sqlite3DbFree(db, zName);
- zName = zNewName;
- j = -1;
- if( zName==0 ) break;
+ cnt = 0;
+ while( zName && sqlite3HashFind(&ht, zName)!=0 ){
+ nName = sqlite3Strlen30(zName);
+ if( nName>0 ){
+ for(j=nName-1; j>0 && sqlite3Isdigit(zName[j]); j--){}
+ if( zName[j]==':' ) nName = j;
}
+ zName = sqlite3MPrintf(db, "%.*z:%u", nName, zName, ++cnt);
+ if( cnt>3 ) sqlite3_randomness(sizeof(cnt), &cnt);
}
pCol->zName = zName;
+ sqlite3ColumnPropertiesFromName(0, pCol);
+ if( zName && sqlite3HashInsert(&ht, zName, pCol)==pCol ){
+ sqlite3OomFault(db);
+ }
}
+ sqlite3HashClear(&ht);
if( db->mallocFailed ){
for(j=0; j<i; j++){
sqlite3DbFree(db, aCol[j].zName);
sqlite3DbFree(db, aCol);
*paCol = 0;
*pnCol = 0;
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
return SQLITE_OK;
}
** This routine requires that all identifiers in the SELECT
** statement be resolved.
*/
-static void selectAddColumnTypeAndCollation(
+SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation(
Parse *pParse, /* Parsing contexts */
Table *pTab, /* Add column type information to this table */
Select *pSelect /* SELECT used to determine types and collations */
int i;
Expr *p;
struct ExprList_item *a;
- u64 szAll = 0;
assert( pSelect!=0 );
assert( (pSelect->selFlags & SF_Resolved)!=0 );
sNC.pSrcList = pSelect->pSrc;
a = pSelect->pEList->a;
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
+ const char *zType;
+ int n, m;
p = a[i].pExpr;
- if( pCol->zType==0 ){
- pCol->zType = sqlite3DbStrDup(db,
- columnType(&sNC, p,0,0,0, &pCol->szEst));
- }
- szAll += pCol->szEst;
+ zType = columnType(&sNC, p, 0, 0, 0);
+ /* pCol->szEst = ... // Column size est for SELECT tables never used */
pCol->affinity = sqlite3ExprAffinity(p);
+ if( zType ){
+ m = sqlite3Strlen30(zType);
+ n = sqlite3Strlen30(pCol->zName);
+ pCol->zName = sqlite3DbReallocOrFree(db, pCol->zName, n+m+2);
+ if( pCol->zName ){
+ memcpy(&pCol->zName[n+1], zType, m+1);
+ pCol->colFlags |= COLFLAG_HASTYPE;
+ }
+ }
if( pCol->affinity==0 ) pCol->affinity = SQLITE_AFF_BLOB;
pColl = sqlite3ExprCollSeq(pParse, p);
if( pColl && pCol->zColl==0 ){
pCol->zColl = sqlite3DbStrDup(db, pColl->zName);
}
}
- pTab->szTabRow = sqlite3LogEst(szAll*4);
+ pTab->szTabRow = 1; /* Any non-zero value works */
}
/*
}
/* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside
** is disabled */
- assert( db->lookaside.bEnabled==0 );
- pTab->nRef = 1;
+ assert( db->lookaside.bDisable );
+ pTab->nTabRef = 1;
pTab->zName = 0;
pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol);
- selectAddColumnTypeAndCollation(pParse, pTab, pSelect);
+ sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSelect);
pTab->iPKey = -1;
if( db->mallocFailed ){
sqlite3DeleteTable(db, pTab);
** If an error occurs, return NULL and leave a message in pParse.
*/
SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){
- Vdbe *v = pParse->pVdbe;
- if( v==0 ){
- v = pParse->pVdbe = sqlite3VdbeCreate(pParse);
- if( v ) sqlite3VdbeAddOp0(v, OP_Init);
- if( pParse->pToplevel==0
- && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst)
- ){
- pParse->okConstFactor = 1;
- }
-
+ if( pParse->pVdbe ){
+ return pParse->pVdbe;
}
- return v;
+ if( pParse->pToplevel==0
+ && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst)
+ ){
+ pParse->okConstFactor = 1;
+ }
+ return sqlite3VdbeCreate(pParse);
}
/*
** Compute the iLimit and iOffset fields of the SELECT based on the
-** pLimit and pOffset expressions. pLimit and pOffset hold the expressions
+** pLimit expressions. pLimit->pLeft and pLimit->pRight hold the expressions
** that appear in the original SQL statement after the LIMIT and OFFSET
** keywords. Or NULL if those keywords are omitted. iLimit and iOffset
** are the integer memory register numbers for counters used to compute
** iLimit and iOffset are negative.
**
** This routine changes the values of iLimit and iOffset only if
-** a limit or offset is defined by pLimit and pOffset. iLimit and
-** iOffset should have been preset to appropriate default values (zero)
+** a limit or offset is defined by pLimit->pLeft and pLimit->pRight. iLimit
+** and iOffset should have been preset to appropriate default values (zero)
** prior to calling this routine.
**
** The iOffset register (if it exists) is initialized to the value
** of the OFFSET. The iLimit register is initialized to LIMIT. Register
** iOffset+1 is initialized to LIMIT+OFFSET.
**
-** Only if pLimit!=0 or pOffset!=0 do the limit registers get
+** Only if pLimit->pLeft!=0 do the limit registers get
** redefined. The UNION ALL operator uses this property to force
** the reuse of the same limit and offset registers across multiple
** SELECT statements.
int iLimit = 0;
int iOffset;
int n;
+ Expr *pLimit = p->pLimit;
+
if( p->iLimit ) return;
/*
** no rows.
*/
sqlite3ExprCacheClear(pParse);
- assert( p->pOffset==0 || p->pLimit!=0 );
- if( p->pLimit ){
+ if( pLimit ){
+ assert( pLimit->op==TK_LIMIT );
+ assert( pLimit->pLeft!=0 );
p->iLimit = iLimit = ++pParse->nMem;
v = sqlite3GetVdbe(pParse);
assert( v!=0 );
- if( sqlite3ExprIsInteger(p->pLimit, &n) ){
+ if( sqlite3ExprIsInteger(pLimit->pLeft, &n) ){
sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit);
VdbeComment((v, "LIMIT counter"));
if( n==0 ){
sqlite3VdbeGoto(v, iBreak);
- }else if( n>=0 && p->nSelectRow>(u64)n ){
- p->nSelectRow = n;
+ }else if( n>=0 && p->nSelectRow>sqlite3LogEst((u64)n) ){
+ p->nSelectRow = sqlite3LogEst((u64)n);
+ p->selFlags |= SF_FixedLimit;
}
}else{
- sqlite3ExprCode(pParse, p->pLimit, iLimit);
+ sqlite3ExprCode(pParse, pLimit->pLeft, iLimit);
sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v);
VdbeComment((v, "LIMIT counter"));
sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, iBreak); VdbeCoverage(v);
}
- if( p->pOffset ){
+ if( pLimit->pRight ){
p->iOffset = iOffset = ++pParse->nMem;
pParse->nMem++; /* Allocate an extra register for limit+offset */
- sqlite3ExprCode(pParse, p->pOffset, iOffset);
+ sqlite3ExprCode(pParse, pLimit->pRight, iOffset);
sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v);
VdbeComment((v, "OFFSET counter"));
- sqlite3VdbeAddOp3(v, OP_SetIfNotPos, iOffset, iOffset, 0);
- sqlite3VdbeAddOp3(v, OP_Add, iLimit, iOffset, iOffset+1);
+ sqlite3VdbeAddOp3(v, OP_OffsetLimit, iLimit, iOffset+1, iOffset);
VdbeComment((v, "LIMIT+OFFSET"));
- sqlite3VdbeAddOp3(v, OP_SetIfNotPos, iLimit, iOffset+1, -1);
}
}
}
int i; /* Loop counter */
int rc; /* Result code */
ExprList *pOrderBy; /* The ORDER BY clause */
- Expr *pLimit, *pOffset; /* Saved LIMIT and OFFSET */
+ Expr *pLimit; /* Saved LIMIT and OFFSET */
int regLimit, regOffset; /* Registers used by LIMIT and OFFSET */
/* Obtain authorization to do a recursive query */
/* Process the LIMIT and OFFSET clauses, if they exist */
addrBreak = sqlite3VdbeMakeLabel(v);
+ p->nSelectRow = 320; /* 4 billion rows */
computeLimitRegisters(pParse, p, addrBreak);
pLimit = p->pLimit;
- pOffset = p->pOffset;
regLimit = p->iLimit;
regOffset = p->iOffset;
- p->pLimit = p->pOffset = 0;
+ p->pLimit = 0;
p->iLimit = p->iOffset = 0;
pOrderBy = p->pOrderBy;
/* Output the single row in Current */
addrCont = sqlite3VdbeMakeLabel(v);
codeOffset(v, regOffset, addrCont);
- selectInnerLoop(pParse, p, p->pEList, iCurrent,
+ selectInnerLoop(pParse, p, iCurrent,
0, 0, pDest, addrCont, addrBreak);
if( regLimit ){
sqlite3VdbeAddOp2(v, OP_DecrJumpZero, regLimit, addrBreak);
sqlite3ExprListDelete(pParse->db, p->pOrderBy);
p->pOrderBy = pOrderBy;
p->pLimit = pLimit;
- p->pOffset = pOffset;
return;
}
#endif /* SQLITE_OMIT_CTE */
** on a VALUES clause.
**
** Because the Select object originates from a VALUES clause:
-** (1) It has no LIMIT or OFFSET
+** (1) There is no LIMIT or OFFSET or else there is a LIMIT of exactly 1
** (2) All terms are UNION ALL
** (3) There is no ORDER BY clause
+**
+** The "LIMIT of exactly 1" case of condition (1) comes about when a VALUES
+** clause occurs within scalar expression (ex: "SELECT (VALUES(1),(2),(3))").
+** The sqlite3CodeSubselect will have added the LIMIT 1 clause in tht case.
+** Since the limit is exactly 1, we only need to evalutes the left-most VALUES.
*/
static int multiSelectValues(
Parse *pParse, /* Parsing context */
SelectDest *pDest /* What to do with query results */
){
Select *pPrior;
+ Select *pRightmost = p;
int nRow = 1;
int rc = 0;
assert( p->selFlags & SF_MultiValue );
do{
assert( p->selFlags & SF_Values );
assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) );
- assert( p->pLimit==0 );
- assert( p->pOffset==0 );
assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr );
if( p->pPrior==0 ) break;
assert( p->pPrior->pNext==p );
p->pPrior = 0;
rc = sqlite3Select(pParse, p, pDest);
p->pPrior = pPrior;
- if( rc ) break;
+ if( rc || pRightmost->pLimit ) break;
p->nSelectRow = nRow;
p = p->pNext;
}
db = pParse->db;
pPrior = p->pPrior;
dest = *pDest;
- if( pPrior->pOrderBy ){
- sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before",
- selectOpName(p->op));
- rc = 1;
- goto multi_select_end;
- }
- if( pPrior->pLimit ){
- sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before",
- selectOpName(p->op));
+ if( pPrior->pOrderBy || pPrior->pLimit ){
+ sqlite3ErrorMsg(pParse,"%s clause should come after %s not before",
+ pPrior->pOrderBy!=0 ? "ORDER BY" : "LIMIT", selectOpName(p->op));
rc = 1;
goto multi_select_end;
}
if( dest.eDest==SRT_EphemTab ){
assert( p->pEList );
sqlite3VdbeAddOp2(v, OP_OpenEphemeral, dest.iSDParm, p->pEList->nExpr);
- sqlite3VdbeChangeP5(v, BTREE_UNORDERED);
dest.eDest = SRT_Table;
}
pPrior->iLimit = p->iLimit;
pPrior->iOffset = p->iOffset;
pPrior->pLimit = p->pLimit;
- pPrior->pOffset = p->pOffset;
explainSetInteger(iSub1, pParse->iNextSelectId);
rc = sqlite3Select(pParse, pPrior, &dest);
p->pLimit = 0;
- p->pOffset = 0;
if( rc ){
goto multi_select_end;
}
addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v);
VdbeComment((v, "Jump ahead if LIMIT reached"));
if( p->iOffset ){
- sqlite3VdbeAddOp3(v, OP_SetIfNotPos, p->iOffset, p->iOffset, 0);
- sqlite3VdbeAddOp3(v, OP_Add, p->iLimit, p->iOffset, p->iOffset+1);
- sqlite3VdbeAddOp3(v, OP_SetIfNotPos, p->iLimit, p->iOffset+1, -1);
+ sqlite3VdbeAddOp3(v, OP_OffsetLimit,
+ p->iLimit, p->iOffset+1, p->iOffset);
}
}
explainSetInteger(iSub2, pParse->iNextSelectId);
testcase( rc!=SQLITE_OK );
pDelete = p->pPrior;
p->pPrior = pPrior;
- p->nSelectRow += pPrior->nSelectRow;
+ p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
if( pPrior->pLimit
- && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit)
- && nLimit>0 && p->nSelectRow > (u64)nLimit
+ && sqlite3ExprIsInteger(pPrior->pLimit->pLeft, &nLimit)
+ && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit)
){
- p->nSelectRow = nLimit;
+ p->nSelectRow = sqlite3LogEst((u64)nLimit);
}
if( addr ){
sqlite3VdbeJumpHere(v, addr);
int unionTab; /* Cursor number of the temporary table holding result */
u8 op = 0; /* One of the SRT_ operations to apply to self */
int priorOp; /* The SRT_ operation to apply to prior selects */
- Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */
+ Expr *pLimit; /* Saved values of p->nLimit */
int addr;
SelectDest uniondest;
** right.
*/
assert( p->pLimit==0 ); /* Not allowed on leftward elements */
- assert( p->pOffset==0 ); /* Not allowed on leftward elements */
unionTab = dest.iSDParm;
}else{
/* We will need to create our own temporary table to hold the
p->pPrior = 0;
pLimit = p->pLimit;
p->pLimit = 0;
- pOffset = p->pOffset;
- p->pOffset = 0;
uniondest.eDest = op;
explainSetInteger(iSub2, pParse->iNextSelectId);
rc = sqlite3Select(pParse, p, &uniondest);
pDelete = p->pPrior;
p->pPrior = pPrior;
p->pOrderBy = 0;
- if( p->op==TK_UNION ) p->nSelectRow += pPrior->nSelectRow;
+ if( p->op==TK_UNION ){
+ p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
+ }
sqlite3ExprDelete(db, p->pLimit);
p->pLimit = pLimit;
- p->pOffset = pOffset;
p->iLimit = 0;
p->iOffset = 0;
if( dest.eDest!=priorOp ){
int iCont, iBreak, iStart;
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, 0, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v);
iStart = sqlite3VdbeCurrentAddr(v);
- selectInnerLoop(pParse, p, p->pEList, unionTab,
+ selectInnerLoop(pParse, p, unionTab,
0, 0, &dest, iCont, iBreak);
sqlite3VdbeResolveLabel(v, iCont);
sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v);
default: assert( p->op==TK_INTERSECT ); {
int tab1, tab2;
int iCont, iBreak, iStart;
- Expr *pLimit, *pOffset;
+ Expr *pLimit;
int addr;
SelectDest intersectdest;
int r1;
p->pPrior = 0;
pLimit = p->pLimit;
p->pLimit = 0;
- pOffset = p->pOffset;
- p->pOffset = 0;
intersectdest.iSDParm = tab2;
explainSetInteger(iSub2, pParse->iNextSelectId);
rc = sqlite3Select(pParse, p, &intersectdest);
if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow;
sqlite3ExprDelete(db, p->pLimit);
p->pLimit = pLimit;
- p->pOffset = pOffset;
/* Generate code to take the intersection of the two temporary
** tables.
*/
assert( p->pEList );
- if( dest.eDest==SRT_Output ){
- Select *pFirst = p;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, 0, pFirst->pEList);
- }
iBreak = sqlite3VdbeMakeLabel(v);
iCont = sqlite3VdbeMakeLabel(v);
computeLimitRegisters(pParse, p, iBreak);
sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v);
r1 = sqlite3GetTempReg(pParse);
- iStart = sqlite3VdbeAddOp2(v, OP_RowKey, tab1, r1);
+ iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1);
sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v);
sqlite3ReleaseTempReg(pParse, r1);
- selectInnerLoop(pParse, p, p->pEList, tab1,
+ selectInnerLoop(pParse, p, tab1,
0, 0, &dest, iCont, iBreak);
sqlite3VdbeResolveLabel(v, iCont);
sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v);
nCol = p->pEList->nExpr;
pKeyInfo = sqlite3KeyInfoAlloc(db, nCol, 1);
if( !pKeyInfo ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto multi_select_end;
}
for(i=0, apColl=pKeyInfo->aColl; i<nCol; i++, apColl++){
}
#ifndef SQLITE_OMIT_SUBQUERY
- /* If we are creating a set for an "expr IN (SELECT ...)" construct,
- ** then there should be a single item on the stack. Write this
- ** item into the set table with bogus data.
+ /* If we are creating a set for an "expr IN (SELECT ...)".
*/
case SRT_Set: {
int r1;
- assert( pIn->nSdst==1 || pParse->nErr>0 );
- pDest->affSdst =
- sqlite3CompareAffinity(p->pEList->a[0].pExpr, pDest->affSdst);
+ testcase( pIn->nSdst>1 );
r1 = sqlite3GetTempReg(pParse);
- sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, 1, r1, &pDest->affSdst,1);
- sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, 1);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iSDParm, r1);
+ sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst,
+ r1, pDest->zAffSdst, pIn->nSdst);
+ sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pDest->iSDParm, r1,
+ pIn->iSdst, pIn->nSdst);
sqlite3ReleaseTempReg(pParse, r1);
break;
}
}
if( j==nOrderBy ){
Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0);
- if( pNew==0 ) return SQLITE_NOMEM;
+ if( pNew==0 ) return SQLITE_NOMEM_BKPT;
pNew->flags |= EP_IntValue;
pNew->u.iValue = i;
- pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew);
+ p->pOrderBy = pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew);
if( pOrderBy ) pOrderBy->a[nOrderBy++].u.x.iOrderByCol = (u16)i;
}
}
** to the right and the left are evaluated, they use the correct
** collation.
*/
- aPermute = sqlite3DbMallocRaw(db, sizeof(int)*nOrderBy);
+ aPermute = sqlite3DbMallocRawNN(db, sizeof(int)*(nOrderBy + 1));
if( aPermute ){
struct ExprList_item *pItem;
- for(i=0, pItem=pOrderBy->a; i<nOrderBy; i++, pItem++){
+ aPermute[0] = nOrderBy;
+ for(i=1, pItem=pOrderBy->a; i<=nOrderBy; i++, pItem++){
assert( pItem->u.x.iOrderByCol>0 );
assert( pItem->u.x.iOrderByCol<=p->pEList->nExpr );
aPermute[i] = pItem->u.x.iOrderByCol - 1;
}
sqlite3ExprDelete(db, p->pLimit);
p->pLimit = 0;
- sqlite3ExprDelete(db, p->pOffset);
- p->pOffset = 0;
regAddrA = ++pParse->nMem;
regAddrB = ++pParse->nMem;
pPrior->iLimit = regLimitA;
explainSetInteger(iSub1, pParse->iNextSelectId);
sqlite3Select(pParse, pPrior, &destA);
- sqlite3VdbeAddOp1(v, OP_EndCoroutine, regAddrA);
+ sqlite3VdbeEndCoroutine(v, regAddrA);
sqlite3VdbeJumpHere(v, addr1);
/* Generate a coroutine to evaluate the SELECT statement on
sqlite3Select(pParse, p, &destB);
p->iLimit = savedLimit;
p->iOffset = savedOffset;
- sqlite3VdbeAddOp1(v, OP_EndCoroutine, regAddrB);
+ sqlite3VdbeEndCoroutine(v, regAddrB);
/* Generate a subroutine that outputs the current row of the A
** select as the next output row of the compound select.
addrEofA_noB = sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, labelEnd);
VdbeCoverage(v);
sqlite3VdbeGoto(v, addrEofA);
- p->nSelectRow += pPrior->nSelectRow;
+ p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
}
/* Generate a subroutine to run when the results from select B
*/
sqlite3VdbeResolveLabel(v, labelEnd);
- /* Set the number of output columns
- */
- if( pDest->eDest==SRT_Output ){
- Select *pFirst = pPrior;
- while( pFirst->pPrior ) pFirst = pFirst->pPrior;
- generateColumnNames(pParse, 0, pFirst->pEList);
- }
-
/* Reassembly the compound query so that it will be freed correctly
** by the calling function */
if( p->pPrior ){
#endif
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
+
+/* An instance of the SubstContext object describes an substitution edit
+** to be performed on a parse tree.
+**
+** All references to columns in table iTable are to be replaced by corresponding
+** expressions in pEList.
+*/
+typedef struct SubstContext {
+ Parse *pParse; /* The parsing context */
+ int iTable; /* Replace references to this table */
+ int iNewTable; /* New table number */
+ int isLeftJoin; /* Add TK_IF_NULL_ROW opcodes on each replacement */
+ ExprList *pEList; /* Replacement expressions */
+} SubstContext;
+
/* Forward Declarations */
-static void substExprList(sqlite3*, ExprList*, int, ExprList*);
-static void substSelect(sqlite3*, Select *, int, ExprList*, int);
+static void substExprList(SubstContext*, ExprList*);
+static void substSelect(SubstContext*, Select*, int);
/*
** Scan through the expression pExpr. Replace every reference to
** This routine is part of the flattening procedure. A subquery
** whose result set is defined by pEList appears as entry in the
** FROM clause of a SELECT such that the VDBE cursor assigned to that
-** FORM clause entry is iTable. This routine make the necessary
+** FORM clause entry is iTable. This routine makes the necessary
** changes to pExpr so that it refers directly to the source table
** of the subquery rather the result set of the subquery.
*/
static Expr *substExpr(
- sqlite3 *db, /* Report malloc errors to this connection */
- Expr *pExpr, /* Expr in which substitution occurs */
- int iTable, /* Table to be substituted */
- ExprList *pEList /* Substitute expressions */
+ SubstContext *pSubst, /* Description of the substitution */
+ Expr *pExpr /* Expr in which substitution occurs */
){
if( pExpr==0 ) return 0;
- if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){
+ if( ExprHasProperty(pExpr, EP_FromJoin)
+ && pExpr->iRightJoinTable==pSubst->iTable
+ ){
+ pExpr->iRightJoinTable = pSubst->iNewTable;
+ }
+ if( pExpr->op==TK_COLUMN && pExpr->iTable==pSubst->iTable ){
if( pExpr->iColumn<0 ){
pExpr->op = TK_NULL;
}else{
Expr *pNew;
- assert( pEList!=0 && pExpr->iColumn<pEList->nExpr );
+ Expr *pCopy = pSubst->pEList->a[pExpr->iColumn].pExpr;
+ Expr ifNullRow;
+ assert( pSubst->pEList!=0 && pExpr->iColumn<pSubst->pEList->nExpr );
assert( pExpr->pLeft==0 && pExpr->pRight==0 );
- pNew = sqlite3ExprDup(db, pEList->a[pExpr->iColumn].pExpr, 0);
- sqlite3ExprDelete(db, pExpr);
- pExpr = pNew;
+ if( sqlite3ExprIsVector(pCopy) ){
+ sqlite3VectorErrorMsg(pSubst->pParse, pCopy);
+ }else{
+ sqlite3 *db = pSubst->pParse->db;
+ if( pSubst->isLeftJoin && pCopy->op!=TK_COLUMN ){
+ memset(&ifNullRow, 0, sizeof(ifNullRow));
+ ifNullRow.op = TK_IF_NULL_ROW;
+ ifNullRow.pLeft = pCopy;
+ ifNullRow.iTable = pSubst->iNewTable;
+ pCopy = &ifNullRow;
+ }
+ pNew = sqlite3ExprDup(db, pCopy, 0);
+ if( pNew && pSubst->isLeftJoin ){
+ ExprSetProperty(pNew, EP_CanBeNull);
+ }
+ if( pNew && ExprHasProperty(pExpr,EP_FromJoin) ){
+ pNew->iRightJoinTable = pExpr->iRightJoinTable;
+ ExprSetProperty(pNew, EP_FromJoin);
+ }
+ sqlite3ExprDelete(db, pExpr);
+ pExpr = pNew;
+ }
}
}else{
- pExpr->pLeft = substExpr(db, pExpr->pLeft, iTable, pEList);
- pExpr->pRight = substExpr(db, pExpr->pRight, iTable, pEList);
+ if( pExpr->op==TK_IF_NULL_ROW && pExpr->iTable==pSubst->iTable ){
+ pExpr->iTable = pSubst->iNewTable;
+ }
+ pExpr->pLeft = substExpr(pSubst, pExpr->pLeft);
+ pExpr->pRight = substExpr(pSubst, pExpr->pRight);
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
- substSelect(db, pExpr->x.pSelect, iTable, pEList, 1);
+ substSelect(pSubst, pExpr->x.pSelect, 1);
}else{
- substExprList(db, pExpr->x.pList, iTable, pEList);
+ substExprList(pSubst, pExpr->x.pList);
}
}
return pExpr;
}
static void substExprList(
- sqlite3 *db, /* Report malloc errors here */
- ExprList *pList, /* List to scan and in which to make substitutes */
- int iTable, /* Table to be substituted */
- ExprList *pEList /* Substitute values */
+ SubstContext *pSubst, /* Description of the substitution */
+ ExprList *pList /* List to scan and in which to make substitutes */
){
int i;
if( pList==0 ) return;
for(i=0; i<pList->nExpr; i++){
- pList->a[i].pExpr = substExpr(db, pList->a[i].pExpr, iTable, pEList);
+ pList->a[i].pExpr = substExpr(pSubst, pList->a[i].pExpr);
}
}
static void substSelect(
- sqlite3 *db, /* Report malloc errors here */
- Select *p, /* SELECT statement in which to make substitutions */
- int iTable, /* Table to be replaced */
- ExprList *pEList, /* Substitute values */
- int doPrior /* Do substitutes on p->pPrior too */
+ SubstContext *pSubst, /* Description of the substitution */
+ Select *p, /* SELECT statement in which to make substitutions */
+ int doPrior /* Do substitutes on p->pPrior too */
){
SrcList *pSrc;
struct SrcList_item *pItem;
int i;
if( !p ) return;
do{
- substExprList(db, p->pEList, iTable, pEList);
- substExprList(db, p->pGroupBy, iTable, pEList);
- substExprList(db, p->pOrderBy, iTable, pEList);
- p->pHaving = substExpr(db, p->pHaving, iTable, pEList);
- p->pWhere = substExpr(db, p->pWhere, iTable, pEList);
+ substExprList(pSubst, p->pEList);
+ substExprList(pSubst, p->pGroupBy);
+ substExprList(pSubst, p->pOrderBy);
+ p->pHaving = substExpr(pSubst, p->pHaving);
+ p->pWhere = substExpr(pSubst, p->pWhere);
pSrc = p->pSrc;
assert( pSrc!=0 );
for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){
- substSelect(db, pItem->pSelect, iTable, pEList, 1);
+ substSelect(pSubst, pItem->pSelect, 1);
if( pItem->fg.isTabFunc ){
- substExprList(db, pItem->u1.pFuncArg, iTable, pEList);
+ substExprList(pSubst, pItem->u1.pFuncArg);
}
}
}while( doPrior && (p = p->pPrior)!=0 );
** exist on the table t1, a complete scan of the data might be
** avoided.
**
-** Flattening is only attempted if all of the following are true:
+** Flattening is subject to the following constraints:
**
-** (1) The subquery and the outer query do not both use aggregates.
+** (**) We no longer attempt to flatten aggregate subqueries. Was:
+** The subquery and the outer query cannot both be aggregates.
**
-** (2) The subquery is not an aggregate or (2a) the outer query is not a join
-** and (2b) the outer query does not use subqueries other than the one
-** FROM-clause subquery that is a candidate for flattening. (2b is
-** due to ticket [2f7170d73bf9abf80] from 2015-02-09.)
+** (**) We no longer attempt to flatten aggregate subqueries. Was:
+** (2) If the subquery is an aggregate then
+** (2a) the outer query must not be a join and
+** (2b) the outer query must not use subqueries
+** other than the one FROM-clause subquery that is a candidate
+** for flattening. (This is due to ticket [2f7170d73bf9abf80]
+** from 2015-02-09.)
**
-** (3) The subquery is not the right operand of a left outer join
-** (Originally ticket #306. Strengthened by ticket #3300)
+** (3) If the subquery is the right operand of a LEFT JOIN then
+** (3a) the subquery may not be a join and
+** (3b) the FROM clause of the subquery may not contain a virtual
+** table and
+** (3c) the outer query may not be an aggregate.
**
-** (4) The subquery is not DISTINCT.
+** (4) The subquery can not be DISTINCT.
**
** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT
** sub-queries that were excluded from this optimization. Restriction
** (4) has since been expanded to exclude all DISTINCT subqueries.
**
-** (6) The subquery does not use aggregates or the outer query is not
-** DISTINCT.
+** (**) We no longer attempt to flatten aggregate subqueries. Was:
+** If the subquery is aggregate, the outer query may not be DISTINCT.
**
-** (7) The subquery has a FROM clause. TODO: For subqueries without
-** A FROM clause, consider adding a FROM close with the special
+** (7) The subquery must have a FROM clause. TODO: For subqueries without
+** A FROM clause, consider adding a FROM clause with the special
** table sqlite_once that consists of a single row containing a
** single NULL.
**
-** (8) The subquery does not use LIMIT or the outer query is not a join.
+** (8) If the subquery uses LIMIT then the outer query may not be a join.
**
-** (9) The subquery does not use LIMIT or the outer query does not use
-** aggregates.
+** (9) If the subquery uses LIMIT then the outer query may not be aggregate.
**
** (**) Restriction (10) was removed from the code on 2005-02-05 but we
** accidently carried the comment forward until 2014-09-15. Original
-** text: "The subquery does not use aggregates or the outer query
-** does not use LIMIT."
+** constraint: "If the subquery is aggregate then the outer query
+** may not use LIMIT."
**
-** (11) The subquery and the outer query do not both have ORDER BY clauses.
+** (11) The subquery and the outer query may not both have ORDER BY clauses.
**
** (**) Not implemented. Subsumed into restriction (3). Was previously
** a separate restriction deriving from ticket #350.
**
-** (13) The subquery and outer query do not both use LIMIT.
+** (13) The subquery and outer query may not both use LIMIT.
**
-** (14) The subquery does not use OFFSET.
+** (14) The subquery may not use OFFSET.
**
-** (15) The outer query is not part of a compound select or the
-** subquery does not have a LIMIT clause.
+** (15) If the outer query is part of a compound select, then the
+** subquery may not use LIMIT.
** (See ticket #2339 and ticket [02a8e81d44]).
**
-** (16) The outer query is not an aggregate or the subquery does
-** not contain ORDER BY. (Ticket #2942) This used to not matter
+** (16) If the outer query is aggregate, then the subquery may not
+** use ORDER BY. (Ticket #2942) This used to not matter
** until we introduced the group_concat() function.
**
-** (17) The sub-query is not a compound select, or it is a UNION ALL
-** compound clause made up entirely of non-aggregate queries, and
-** the parent query:
-**
-** * is not itself part of a compound select,
-** * is not an aggregate or DISTINCT query, and
-** * is not a join
+** (17) If the subquery is a compound select, then
+** (17a) all compound operators must be a UNION ALL, and
+** (17b) no terms within the subquery compound may be aggregate
+** or DISTINCT, and
+** (17c) every term within the subquery compound must have a FROM clause
+** (17d) the outer query may not be
+** (17d1) aggregate, or
+** (17d2) DISTINCT, or
+** (17d3) a join.
**
** The parent and sub-query may contain WHERE clauses. Subject to
** rules (11), (13) and (14), they may also contain ORDER BY,
** syntax error and return a detailed message.
**
** (18) If the sub-query is a compound select, then all terms of the
-** ORDER by clause of the parent must be simple references to
+** ORDER BY clause of the parent must be simple references to
** columns of the sub-query.
**
-** (19) The subquery does not use LIMIT or the outer query does not
+** (19) If the subquery uses LIMIT then the outer query may not
** have a WHERE clause.
**
** (20) If the sub-query is a compound select, then it must not use
** appear as unmodified result columns in the outer query. But we
** have other optimizations in mind to deal with that case.
**
-** (21) The subquery does not use LIMIT or the outer query is not
+** (21) If the subquery uses LIMIT then the outer query may not be
** DISTINCT. (See ticket [752e1646fc]).
**
-** (22) The subquery is not a recursive CTE.
+** (22) The subquery may not be a recursive CTE.
**
-** (23) The parent is not a recursive CTE, or the sub-query is not a
-** compound query. This restriction is because transforming the
+** (**) Subsumed into restriction (17d3). Was: If the outer query is
+** a recursive CTE, then the sub-query may not be a compound query.
+** This restriction is because transforming the
** parent to a compound query confuses the code that handles
** recursive queries in multiSelect().
**
-** (24) The subquery is not an aggregate that uses the built-in min() or
+** (**) We no longer attempt to flatten aggregate subqueries. Was:
+** The subquery may not be an aggregate that uses the built-in min() or
** or max() functions. (Without this restriction, a query like:
** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily
** return the value X for which Y was maximal.)
**
** In this routine, the "p" parameter is a pointer to the outer query.
** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query
-** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates.
+** uses aggregates.
**
** If flattening is not attempted, this routine is a no-op and returns 0.
** If flattening is attempted this routine returns 1.
Parse *pParse, /* Parsing context */
Select *p, /* The parent or outer SELECT statement */
int iFrom, /* Index in p->pSrc->a[] of the inner subquery */
- int isAgg, /* True if outer SELECT uses aggregate functions */
- int subqueryIsAgg /* True if the subquery uses aggregate functions */
+ int isAgg /* True if outer SELECT uses aggregate functions */
){
const char *zSavedAuthContext = pParse->zAuthContext;
Select *pParent; /* Current UNION ALL term of the other query */
Select *pSub1; /* Pointer to the rightmost select in sub-query */
SrcList *pSrc; /* The FROM clause of the outer query */
SrcList *pSubSrc; /* The FROM clause of the subquery */
- ExprList *pList; /* The result set of the outer query */
int iParent; /* VDBE cursor number of the pSub result set temp table */
+ int iNewParent = -1;/* Replacement table for iParent */
+ int isLeftJoin = 0; /* True if pSub is the right side of a LEFT JOIN */
int i; /* Loop counter */
Expr *pWhere; /* The WHERE clause */
struct SrcList_item *pSubitem; /* The subquery */
/* Check to see if flattening is permitted. Return 0 if not.
*/
assert( p!=0 );
- assert( p->pPrior==0 ); /* Unable to flatten compound queries */
+ assert( p->pPrior==0 );
if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0;
pSrc = p->pSrc;
assert( pSrc && iFrom>=0 && iFrom<pSrc->nSrc );
iParent = pSubitem->iCursor;
pSub = pSubitem->pSelect;
assert( pSub!=0 );
- if( subqueryIsAgg ){
- if( isAgg ) return 0; /* Restriction (1) */
- if( pSrc->nSrc>1 ) return 0; /* Restriction (2a) */
- if( (p->pWhere && ExprHasProperty(p->pWhere,EP_Subquery))
- || (sqlite3ExprListFlags(p->pEList) & EP_Subquery)!=0
- || (sqlite3ExprListFlags(p->pOrderBy) & EP_Subquery)!=0
- ){
- return 0; /* Restriction (2b) */
- }
- }
-
+
pSubSrc = pSub->pSrc;
assert( pSubSrc );
/* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants,
** became arbitrary expressions, we were forced to add restrictions (13)
** and (14). */
if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */
- if( pSub->pOffset ) return 0; /* Restriction (14) */
+ if( pSub->pLimit && pSub->pLimit->pRight ) return 0; /* Restriction (14) */
if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){
return 0; /* Restriction (15) */
}
if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */
- if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (5) */
+ if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (4) */
if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){
return 0; /* Restrictions (8)(9) */
}
- if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){
- return 0; /* Restriction (6) */
- }
if( p->pOrderBy && pSub->pOrderBy ){
return 0; /* Restriction (11) */
}
if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){
return 0; /* Restriction (21) */
}
- testcase( pSub->selFlags & SF_Recursive );
- testcase( pSub->selFlags & SF_MinMaxAgg );
- if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){
- return 0; /* Restrictions (22) and (24) */
- }
- if( (p->selFlags & SF_Recursive) && pSub->pPrior ){
- return 0; /* Restriction (23) */
+ if( pSub->selFlags & (SF_Recursive) ){
+ return 0; /* Restrictions (22) */
}
- /* OBSOLETE COMMENT 1:
- ** Restriction 3: If the subquery is a join, make sure the subquery is
- ** not used as the right operand of an outer join. Examples of why this
- ** is not allowed:
+ /*
+ ** If the subquery is the right operand of a LEFT JOIN, then the
+ ** subquery may not be a join itself (3a). Example of why this is not
+ ** allowed:
**
** t1 LEFT OUTER JOIN (t2 JOIN t3)
**
**
** which is not at all the same thing.
**
- ** OBSOLETE COMMENT 2:
- ** Restriction 12: If the subquery is the right operand of a left outer
- ** join, make sure the subquery has no WHERE clause.
- ** An examples of why this is not allowed:
- **
- ** t1 LEFT OUTER JOIN (SELECT * FROM t2 WHERE t2.x>0)
- **
- ** If we flatten the above, we would get
- **
- ** (t1 LEFT OUTER JOIN t2) WHERE t2.x>0
- **
- ** But the t2.x>0 test will always fail on a NULL row of t2, which
- ** effectively converts the OUTER JOIN into an INNER JOIN.
+ ** If the subquery is the right operand of a LEFT JOIN, then the outer
+ ** query cannot be an aggregate. (3c) This is an artifact of the way
+ ** aggregates are processed - there is no mechanism to determine if
+ ** the LEFT JOIN table should be all-NULL.
**
- ** THIS OVERRIDES OBSOLETE COMMENTS 1 AND 2 ABOVE:
- ** Ticket #3300 shows that flattening the right term of a LEFT JOIN
- ** is fraught with danger. Best to avoid the whole thing. If the
- ** subquery is the right term of a LEFT JOIN, then do not flatten.
+ ** See also tickets #306, #350, and #3300.
*/
if( (pSubitem->fg.jointype & JT_OUTER)!=0 ){
- return 0;
+ isLeftJoin = 1;
+ if( pSubSrc->nSrc>1 || isAgg || IsVirtual(pSubSrc->a[0].pTab) ){
+ /* (3a) (3c) (3b) */
+ return 0;
+ }
}
+#ifdef SQLITE_EXTRA_IFNULLROW
+ else if( iFrom>0 && !isAgg ){
+ /* Setting isLeftJoin to -1 causes OP_IfNullRow opcodes to be generated for
+ ** every reference to any result column from subquery in a join, even
+ ** though they are not necessary. This will stress-test the OP_IfNullRow
+ ** opcode. */
+ isLeftJoin = -1;
+ }
+#endif
- /* Restriction 17: If the sub-query is a compound SELECT, then it must
+ /* Restriction (17): If the sub-query is a compound SELECT, then it must
** use only the UNION ALL operator. And none of the simple select queries
** that make up the compound SELECT are allowed to be aggregate or distinct
** queries.
*/
if( pSub->pPrior ){
if( pSub->pOrderBy ){
- return 0; /* Restriction 20 */
+ return 0; /* Restriction (20) */
}
if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){
- return 0;
+ return 0; /* (17d1), (17d2), or (17d3) */
}
for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){
testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct );
testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate );
assert( pSub->pSrc!=0 );
assert( pSub->pEList->nExpr==pSub1->pEList->nExpr );
- if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0
- || (pSub1->pPrior && pSub1->op!=TK_ALL)
- || pSub1->pSrc->nSrc<1
+ if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 /* (17b) */
+ || (pSub1->pPrior && pSub1->op!=TK_ALL) /* (17a) */
+ || pSub1->pSrc->nSrc<1 /* (17c) */
){
return 0;
}
testcase( pSub1->pSrc->nSrc>1 );
}
- /* Restriction 18. */
+ /* Restriction (18). */
if( p->pOrderBy ){
int ii;
for(ii=0; ii<p->pOrderBy->nExpr; ii++){
}
}
+ /* Ex-restriction (23):
+ ** The only way that the recursive part of a CTE can contain a compound
+ ** subquery is for the subquery to be one term of a join. But if the
+ ** subquery is a join, then the flattening has already been stopped by
+ ** restriction (17d3)
+ */
+ assert( (p->selFlags & SF_Recursive)==0 || pSub->pPrior==0 );
+
/***** If we reach this point, flattening is permitted. *****/
SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n",
pSub->zSelName, pSub, iFrom));
Select *pNew;
ExprList *pOrderBy = p->pOrderBy;
Expr *pLimit = p->pLimit;
- Expr *pOffset = p->pOffset;
Select *pPrior = p->pPrior;
p->pOrderBy = 0;
p->pSrc = 0;
p->pPrior = 0;
p->pLimit = 0;
- p->pOffset = 0;
pNew = sqlite3SelectDup(db, p, 0);
sqlite3SelectSetName(pNew, pSub->zSelName);
- p->pOffset = pOffset;
p->pLimit = pLimit;
p->pOrderBy = pOrderBy;
p->pSrc = pSrc;
*/
if( ALWAYS(pSubitem->pTab!=0) ){
Table *pTabToDel = pSubitem->pTab;
- if( pTabToDel->nRef==1 ){
+ if( pTabToDel->nTabRef==1 ){
Parse *pToplevel = sqlite3ParseToplevel(pParse);
pTabToDel->pNextZombie = pToplevel->pZombieTab;
pToplevel->pZombieTab = pTabToDel;
}else{
- pTabToDel->nRef--;
+ pTabToDel->nTabRef--;
}
pSubitem->pTab = 0;
}
*/
for(i=0; i<nSubSrc; i++){
sqlite3IdListDelete(db, pSrc->a[i+iFrom].pUsing);
+ assert( pSrc->a[i+iFrom].fg.isTabFunc==0 );
pSrc->a[i+iFrom] = pSubSrc->a[i];
+ iNewParent = pSubSrc->a[i].iCursor;
memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i]));
}
pSrc->a[iFrom].fg.jointype = jointype;
** We look at every expression in the outer query and every place we see
** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
*/
- pList = pParent->pEList;
- for(i=0; i<pList->nExpr; i++){
- if( pList->a[i].zName==0 ){
- char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan);
- sqlite3Dequote(zName);
- pList->a[i].zName = zName;
- }
- }
if( pSub->pOrderBy ){
/* At this point, any non-zero iOrderByCol values indicate that the
** ORDER BY column expression is identical to the iOrderByCol'th
pOrderBy->a[i].u.x.iOrderByCol = 0;
}
assert( pParent->pOrderBy==0 );
- assert( pSub->pPrior==0 );
pParent->pOrderBy = pOrderBy;
pSub->pOrderBy = 0;
}
pWhere = sqlite3ExprDup(db, pSub->pWhere, 0);
- if( subqueryIsAgg ){
- assert( pParent->pHaving==0 );
- pParent->pHaving = pParent->pWhere;
- pParent->pWhere = pWhere;
- pParent->pHaving = sqlite3ExprAnd(db, pParent->pHaving,
- sqlite3ExprDup(db, pSub->pHaving, 0));
- assert( pParent->pGroupBy==0 );
- pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0);
- }else{
- pParent->pWhere = sqlite3ExprAnd(db, pParent->pWhere, pWhere);
- }
- substSelect(db, pParent, iParent, pSub->pEList, 0);
+ if( isLeftJoin>0 ){
+ setJoinExpr(pWhere, iNewParent);
+ }
+ pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere);
+ if( db->mallocFailed==0 ){
+ SubstContext x;
+ x.pParse = pParse;
+ x.iTable = iParent;
+ x.iNewTable = iNewParent;
+ x.isLeftJoin = isLeftJoin;
+ x.pEList = pSub->pEList;
+ substSelect(&x, pParent, 0);
+ }
/* The flattened query is distinct if either the inner or the
** outer query is distinct.
**
** Do not attempt this optimization if:
**
-** (1) The inner query is an aggregate. (In that case, we'd really want
-** to copy the outer WHERE-clause terms onto the HAVING clause of the
-** inner query. But they probably won't help there so do not bother.)
+** (1) (** This restriction was removed on 2017-09-29. We used to
+** disallow this optimization for aggregate subqueries, but now
+** it is allowed by putting the extra terms on the HAVING clause.
+** The added HAVING clause is pointless if the subquery lacks
+** a GROUP BY clause. But such a HAVING clause is also harmless
+** so there does not appear to be any reason to add extra logic
+** to suppress it. **)
**
** (2) The inner query is the recursive part of a common table expression.
**
** (3) The inner query has a LIMIT clause (since the changes to the WHERE
** close would change the meaning of the LIMIT).
**
-** (4) The inner query is the right operand of a LEFT JOIN. (The caller
-** enforces this restriction since this routine does not have enough
-** information to know.)
+** (4) The inner query is the right operand of a LEFT JOIN and the
+** expression to be pushed down does not come from the ON clause
+** on that LEFT JOIN.
**
** (5) The WHERE clause expression originates in the ON or USING clause
-** of a LEFT JOIN.
+** of a LEFT JOIN where iCursor is not the right-hand table of that
+** left join. An example:
+**
+** SELECT *
+** FROM (SELECT 1 AS a1 UNION ALL SELECT 2) AS aa
+** JOIN (SELECT 1 AS b2 UNION ALL SELECT 2) AS bb ON (a1=b2)
+** LEFT JOIN (SELECT 8 AS c3 UNION ALL SELECT 9) AS cc ON (b2=2);
+**
+** The correct answer is three rows: (1,1,NULL),(2,2,8),(2,2,9).
+** But if the (b2=2) term were to be pushed down into the bb subquery,
+** then the (1,1,NULL) row would be suppressed.
**
** Return 0 if no changes are made and non-zero if one or more WHERE clause
** terms are duplicated into the subquery.
*/
static int pushDownWhereTerms(
- sqlite3 *db, /* The database connection (for malloc()) */
+ Parse *pParse, /* Parse context (for malloc() and error reporting) */
Select *pSubq, /* The subquery whose WHERE clause is to be augmented */
Expr *pWhere, /* The WHERE clause of the outer query */
- int iCursor /* Cursor number of the subquery */
+ int iCursor, /* Cursor number of the subquery */
+ int isLeftJoin /* True if pSubq is the right term of a LEFT JOIN */
){
Expr *pNew;
int nChng = 0;
if( pWhere==0 ) return 0;
- if( (pSubq->selFlags & (SF_Aggregate|SF_Recursive))!=0 ){
- return 0; /* restrictions (1) and (2) */
+ if( pSubq->selFlags & SF_Recursive ) return 0; /* restriction (2) */
+
+#ifdef SQLITE_DEBUG
+ /* Only the first term of a compound can have a WITH clause. But make
+ ** sure no other terms are marked SF_Recursive in case something changes
+ ** in the future.
+ */
+ {
+ Select *pX;
+ for(pX=pSubq; pX; pX=pX->pPrior){
+ assert( (pX->selFlags & (SF_Recursive))==0 );
+ }
}
+#endif
+
if( pSubq->pLimit!=0 ){
- return 0; /* restriction (3) */
+ return 0; /* restriction (3) */
}
while( pWhere->op==TK_AND ){
- nChng += pushDownWhereTerms(db, pSubq, pWhere->pRight, iCursor);
+ nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight,
+ iCursor, isLeftJoin);
pWhere = pWhere->pLeft;
}
- if( ExprHasProperty(pWhere,EP_FromJoin) ) return 0; /* restriction 5 */
+ if( isLeftJoin
+ && (ExprHasProperty(pWhere,EP_FromJoin)==0
+ || pWhere->iRightJoinTable!=iCursor)
+ ){
+ return 0; /* restriction (4) */
+ }
+ if( ExprHasProperty(pWhere,EP_FromJoin) && pWhere->iRightJoinTable!=iCursor ){
+ return 0; /* restriction (5) */
+ }
if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){
nChng++;
while( pSubq ){
- pNew = sqlite3ExprDup(db, pWhere, 0);
- pNew = substExpr(db, pNew, iCursor, pSubq->pEList);
- pSubq->pWhere = sqlite3ExprAnd(db, pSubq->pWhere, pNew);
+ SubstContext x;
+ pNew = sqlite3ExprDup(pParse->db, pWhere, 0);
+ unsetJoinExpr(pNew, -1);
+ x.pParse = pParse;
+ x.iTable = iCursor;
+ x.iNewTable = iCursor;
+ x.isLeftJoin = 0;
+ x.pEList = pSubq->pEList;
+ pNew = substExpr(&x, pNew);
+ if( pSubq->selFlags & SF_Aggregate ){
+ pSubq->pHaving = sqlite3ExprAnd(pParse->db, pSubq->pHaving, pNew);
+ }else{
+ pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew);
+ }
pSubq = pSubq->pPrior;
}
}
#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */
/*
-** Based on the contents of the AggInfo structure indicated by the first
-** argument, this function checks if the following are true:
+** The pFunc is the only aggregate function in the query. Check to see
+** if the query is a candidate for the min/max optimization.
**
-** * the query contains just a single aggregate function,
-** * the aggregate function is either min() or max(), and
-** * the argument to the aggregate function is a column value.
+** If the query is a candidate for the min/max optimization, then set
+** *ppMinMax to be an ORDER BY clause to be used for the optimization
+** and return either WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX depending on
+** whether pFunc is a min() or max() function.
**
-** If all of the above are true, then WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX
-** is returned as appropriate. Also, *ppMinMax is set to point to the
-** list of arguments passed to the aggregate before returning.
+** If the query is not a candidate for the min/max optimization, return
+** WHERE_ORDERBY_NORMAL (which must be zero).
**
-** Or, if the conditions above are not met, *ppMinMax is set to 0 and
-** WHERE_ORDERBY_NORMAL is returned.
+** This routine must be called after aggregate functions have been
+** located but before their arguments have been subjected to aggregate
+** analysis.
*/
-static u8 minMaxQuery(AggInfo *pAggInfo, ExprList **ppMinMax){
- int eRet = WHERE_ORDERBY_NORMAL; /* Return value */
-
- *ppMinMax = 0;
- if( pAggInfo->nFunc==1 ){
- Expr *pExpr = pAggInfo->aFunc[0].pExpr; /* Aggregate function */
- ExprList *pEList = pExpr->x.pList; /* Arguments to agg function */
-
- assert( pExpr->op==TK_AGG_FUNCTION );
- if( pEList && pEList->nExpr==1 && pEList->a[0].pExpr->op==TK_AGG_COLUMN ){
- const char *zFunc = pExpr->u.zToken;
- if( sqlite3StrICmp(zFunc, "min")==0 ){
- eRet = WHERE_ORDERBY_MIN;
- *ppMinMax = pEList;
- }else if( sqlite3StrICmp(zFunc, "max")==0 ){
- eRet = WHERE_ORDERBY_MAX;
- *ppMinMax = pEList;
- }
- }
- }
-
- assert( *ppMinMax==0 || (*ppMinMax)->nExpr==1 );
+static u8 minMaxQuery(sqlite3 *db, Expr *pFunc, ExprList **ppMinMax){
+ int eRet = WHERE_ORDERBY_NORMAL; /* Return value */
+ ExprList *pEList = pFunc->x.pList; /* Arguments to agg function */
+ const char *zFunc; /* Name of aggregate function pFunc */
+ ExprList *pOrderBy;
+ u8 sortOrder;
+
+ assert( *ppMinMax==0 );
+ assert( pFunc->op==TK_AGG_FUNCTION );
+ if( pEList==0 || pEList->nExpr!=1 ) return eRet;
+ zFunc = pFunc->u.zToken;
+ if( sqlite3StrICmp(zFunc, "min")==0 ){
+ eRet = WHERE_ORDERBY_MIN;
+ sortOrder = SQLITE_SO_ASC;
+ }else if( sqlite3StrICmp(zFunc, "max")==0 ){
+ eRet = WHERE_ORDERBY_MAX;
+ sortOrder = SQLITE_SO_DESC;
+ }else{
+ return eRet;
+ }
+ *ppMinMax = pOrderBy = sqlite3ExprListDup(db, pEList, 0);
+ assert( pOrderBy!=0 || db->mallocFailed );
+ if( pOrderBy ) pOrderBy->a[0].sortOrder = sortOrder;
return eRet;
}
if( pNewSrc==0 ) return WRC_Abort;
*pNew = *p;
p->pSrc = pNewSrc;
- p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ALL, 0));
+ p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ASTERISK, 0));
p->op = TK_SELECT;
p->pWhere = 0;
pNew->pGroupBy = 0;
assert( pNew->pPrior!=0 );
pNew->pPrior->pNext = pNew;
pNew->pLimit = 0;
- pNew->pOffset = 0;
return WRC_Continue;
}
+/*
+** Check to see if the FROM clause term pFrom has table-valued function
+** arguments. If it does, leave an error message in pParse and return
+** non-zero, since pFrom is not allowed to be a table-valued function.
+*/
+static int cannotBeFunction(Parse *pParse, struct SrcList_item *pFrom){
+ if( pFrom->fg.isTabFunc ){
+ sqlite3ErrorMsg(pParse, "'%s' is not a function", pFrom->zName);
+ return 1;
+ }
+ return 0;
+}
+
#ifndef SQLITE_OMIT_CTE
/*
** Argument pWith (which may be NULL) points to a linked list of nested
** object that the returned CTE belongs to.
*/
static struct Cte *searchWith(
- With *pWith, /* Current outermost WITH clause */
+ With *pWith, /* Current innermost WITH clause */
struct SrcList_item *pItem, /* FROM clause element to resolve */
With **ppContext /* OUT: WITH clause return value belongs to */
){
** statement with which it is associated.
*/
SQLITE_PRIVATE void sqlite3WithPush(Parse *pParse, With *pWith, u8 bFree){
- assert( bFree==0 || pParse->pWith==0 );
+ assert( bFree==0 || (pParse->pWith==0 && pParse->pWithToFree==0) );
if( pWith ){
+ assert( pParse->pWith!=pWith );
pWith->pOuter = pParse->pWith;
pParse->pWith = pWith;
- pParse->bFreeWith = bFree;
+ if( bFree ) pParse->pWithToFree = pWith;
}
}
sqlite3ErrorMsg(pParse, pCte->zCteErr, pCte->zName);
return SQLITE_ERROR;
}
+ if( cannotBeFunction(pParse, pFrom) ) return SQLITE_ERROR;
assert( pFrom->pTab==0 );
pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table));
if( pTab==0 ) return WRC_Abort;
- pTab->nRef = 1;
+ pTab->nTabRef = 1;
pTab->zName = sqlite3DbStrDup(db, pCte->zName);
pTab->iPKey = -1;
pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
pTab->tabFlags |= TF_Ephemeral | TF_NoVisibleRowid;
pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0);
- if( db->mallocFailed ) return SQLITE_NOMEM;
+ if( db->mallocFailed ) return SQLITE_NOMEM_BKPT;
assert( pFrom->pSelect );
/* Check if this is a recursive CTE. */
){
pItem->pTab = pTab;
pItem->fg.isRecursive = 1;
- pTab->nRef++;
+ pTab->nTabRef++;
pSel->selFlags |= SF_Recursive;
}
}
}
/* Only one recursive reference is permitted. */
- if( pTab->nRef>2 ){
+ if( pTab->nTabRef>2 ){
sqlite3ErrorMsg(
pParse, "multiple references to recursive table: %s", pCte->zName
);
return SQLITE_ERROR;
}
- assert( pTab->nRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nRef==2 ));
+ assert( pTab->nTabRef==1 ||
+ ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 ));
pCte->zCteErr = "circular reference: %s";
pSavedWith = pParse->pWith;
pParse->pWith = pWith;
- sqlite3WalkSelect(pWalker, bMayRecursive ? pSel->pPrior : pSel);
+ if( bMayRecursive ){
+ Select *pPrior = pSel->pPrior;
+ assert( pPrior->pWith==0 );
+ pPrior->pWith = pSel->pWith;
+ sqlite3WalkSelect(pWalker, pPrior);
+ pPrior->pWith = 0;
+ }else{
+ sqlite3WalkSelect(pWalker, pSel);
+ }
+ pParse->pWith = pWith;
for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior);
pEList = pLeft->pEList;
*/
static void selectPopWith(Walker *pWalker, Select *p){
Parse *pParse = pWalker->pParse;
- With *pWith = findRightmost(p)->pWith;
- if( pWith!=0 ){
- assert( pParse->pWith==pWith );
- pParse->pWith = pWith->pOuter;
+ if( OK_IF_ALWAYS_TRUE(pParse->pWith) && p->pPrior==0 ){
+ With *pWith = findRightmost(p)->pWith;
+ if( pWith!=0 ){
+ assert( pParse->pWith==pWith );
+ pParse->pWith = pWith->pOuter;
+ }
}
}
#else
sqlite3 *db = pParse->db;
Expr *pE, *pRight, *pExpr;
u16 selFlags = p->selFlags;
+ u32 elistFlags = 0;
p->selFlags |= SF_Expanded;
if( db->mallocFailed ){
return WRC_Abort;
}
- if( NEVER(p->pSrc==0) || (selFlags & SF_Expanded)!=0 ){
+ assert( p->pSrc!=0 );
+ if( (selFlags & SF_Expanded)!=0 ){
return WRC_Prune;
}
pTabList = p->pSrc;
pEList = p->pEList;
- if( pWalker->xSelectCallback2==selectPopWith ){
- sqlite3WithPush(pParse, findRightmost(p)->pWith, 0);
+ if( OK_IF_ALWAYS_TRUE(p->pWith) ){
+ sqlite3WithPush(pParse, p->pWith, 0);
}
/* Make sure cursor numbers have been assigned to all entries in
if( sqlite3WalkSelect(pWalker, pSel) ) return WRC_Abort;
pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table));
if( pTab==0 ) return WRC_Abort;
- pTab->nRef = 1;
- pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab);
+ pTab->nTabRef = 1;
+ if( pFrom->zAlias ){
+ pTab->zName = sqlite3DbStrDup(db, pFrom->zAlias);
+ }else{
+ pTab->zName = sqlite3MPrintf(db, "subquery_%p", (void*)pTab);
+ }
while( pSel->pPrior ){ pSel = pSel->pPrior; }
sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol);
pTab->iPKey = -1;
assert( pFrom->pTab==0 );
pFrom->pTab = pTab = sqlite3LocateTableItem(pParse, 0, pFrom);
if( pTab==0 ) return WRC_Abort;
- if( pTab->nRef==0xffff ){
+ if( pTab->nTabRef>=0xffff ){
sqlite3ErrorMsg(pParse, "too many references to \"%s\": max 65535",
pTab->zName);
pFrom->pTab = 0;
return WRC_Abort;
}
- pTab->nRef++;
+ pTab->nTabRef++;
+ if( !IsVirtual(pTab) && cannotBeFunction(pParse, pFrom) ){
+ return WRC_Abort;
+ }
#if !defined(SQLITE_OMIT_VIEW) || !defined (SQLITE_OMIT_VIRTUALTABLE)
- if( pTab->pSelect || IsVirtual(pTab) ){
+ if( IsVirtual(pTab) || pTab->pSelect ){
i16 nCol;
if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort;
assert( pFrom->pSelect==0 );
- if( pFrom->fg.isTabFunc && !IsVirtual(pTab) ){
- sqlite3ErrorMsg(pParse, "'%s' is not a function", pTab->zName);
- return WRC_Abort;
- }
pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0);
sqlite3SelectSetName(pFrom->pSelect, pTab->zName);
nCol = pTab->nCol;
/* For every "*" that occurs in the column list, insert the names of
** all columns in all tables. And for every TABLE.* insert the names
** of all columns in TABLE. The parser inserted a special expression
- ** with the TK_ALL operator for each "*" that it found in the column list.
- ** The following code just has to locate the TK_ALL expressions and expand
- ** each one to the list of all columns in all tables.
+ ** with the TK_ASTERISK operator for each "*" that it found in the column
+ ** list. The following code just has to locate the TK_ASTERISK
+ ** expressions and expand each one to the list of all columns in
+ ** all tables.
**
** The first loop just checks to see if there are any "*" operators
** that need expanding.
*/
for(k=0; k<pEList->nExpr; k++){
pE = pEList->a[k].pExpr;
- if( pE->op==TK_ALL ) break;
+ if( pE->op==TK_ASTERISK ) break;
assert( pE->op!=TK_DOT || pE->pRight!=0 );
assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) );
- if( pE->op==TK_DOT && pE->pRight->op==TK_ALL ) break;
+ if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break;
+ elistFlags |= pE->flags;
}
if( k<pEList->nExpr ){
/*
for(k=0; k<pEList->nExpr; k++){
pE = a[k].pExpr;
+ elistFlags |= pE->flags;
pRight = pE->pRight;
assert( pE->op!=TK_DOT || pRight!=0 );
- if( pE->op!=TK_ALL && (pE->op!=TK_DOT || pRight->op!=TK_ALL) ){
+ if( pE->op!=TK_ASTERISK
+ && (pE->op!=TK_DOT || pRight->op!=TK_ASTERISK)
+ ){
/* This particular expression does not need to be expanded.
*/
pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr);
continue;
}
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
- zSchemaName = iDb>=0 ? db->aDb[iDb].zName : "*";
+ zSchemaName = iDb>=0 ? db->aDb[iDb].zDbSName : "*";
}
for(j=0; j<pTab->nCol; j++){
char *zName = pTab->aCol[j].zName;
continue;
}
- /* If a column is marked as 'hidden' (currently only possible
- ** for virtual tables), do not include it in the expanded
- ** result-set list.
+ /* If a column is marked as 'hidden', omit it from the expanded
+ ** result-set list unless the SELECT has the SF_IncludeHidden
+ ** bit set.
*/
- if( IsHiddenColumn(&pTab->aCol[j]) ){
- assert(IsVirtual(pTab));
+ if( (p->selFlags & SF_IncludeHidden)==0
+ && IsHiddenColumn(&pTab->aCol[j])
+ ){
continue;
}
tableSeen = 1;
if( longNames || pTabList->nSrc>1 ){
Expr *pLeft;
pLeft = sqlite3Expr(db, TK_ID, zTabName);
- pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
+ pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight);
if( zSchemaName ){
pLeft = sqlite3Expr(db, TK_ID, zSchemaName);
- pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr, 0);
+ pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr);
}
if( longNames ){
zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName);
pExpr = pRight;
}
pNew = sqlite3ExprListAppend(pParse, pNew, pExpr);
- sColname.z = zColname;
- sColname.n = sqlite3Strlen30(zColname);
+ sqlite3TokenInit(&sColname, zColname);
sqlite3ExprListSetName(pParse, pNew, &sColname, 0);
if( pNew && (p->selFlags & SF_NestedFrom)!=0 ){
struct ExprList_item *pX = &pNew->a[pNew->nExpr-1];
sqlite3ExprListDelete(db, pEList);
p->pEList = pNew;
}
-#if SQLITE_MAX_COLUMN
- if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){
- sqlite3ErrorMsg(pParse, "too many columns in result set");
+ if( p->pEList ){
+ if( p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){
+ sqlite3ErrorMsg(pParse, "too many columns in result set");
+ return WRC_Abort;
+ }
+ if( (elistFlags & (EP_HasFunc|EP_Subquery))!=0 ){
+ p->selFlags |= SF_ComplexResult;
+ }
}
-#endif
return WRC_Continue;
}
** Walker.xSelectCallback is set to do something useful for every
** subquery in the parser tree.
*/
-static int exprWalkNoop(Walker *NotUsed, Expr *NotUsed2){
+SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker *NotUsed, Expr *NotUsed2){
UNUSED_PARAMETER2(NotUsed, NotUsed2);
return WRC_Continue;
}
+/*
+** No-op routine for the parse-tree walker for SELECT statements.
+** subquery in the parser tree.
+*/
+SQLITE_PRIVATE int sqlite3SelectWalkNoop(Walker *NotUsed, Select *NotUsed2){
+ UNUSED_PARAMETER2(NotUsed, NotUsed2);
+ return WRC_Continue;
+}
+
+#if SQLITE_DEBUG
+/*
+** Always assert. This xSelectCallback2 implementation proves that the
+** xSelectCallback2 is never invoked.
+*/
+SQLITE_PRIVATE void sqlite3SelectWalkAssert2(Walker *NotUsed, Select *NotUsed2){
+ UNUSED_PARAMETER2(NotUsed, NotUsed2);
+ assert( 0 );
+}
+#endif
/*
** This routine "expands" a SELECT statement and all of its subqueries.
** For additional information on what it means to "expand" a SELECT
*/
static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){
Walker w;
- memset(&w, 0, sizeof(w));
- w.xExprCallback = exprWalkNoop;
+ w.xExprCallback = sqlite3ExprWalkNoop;
w.pParse = pParse;
- if( pParse->hasCompound ){
+ if( OK_IF_ALWAYS_TRUE(pParse->hasCompound) ){
w.xSelectCallback = convertCompoundSelectToSubquery;
+ w.xSelectCallback2 = 0;
sqlite3WalkSelect(&w, pSelect);
}
w.xSelectCallback = selectExpander;
- if( (pSelect->selFlags & SF_MultiValue)==0 ){
- w.xSelectCallback2 = selectPopWith;
- }
+ w.xSelectCallback2 = selectPopWith;
sqlite3WalkSelect(&w, pSelect);
}
Select *pSel = pFrom->pSelect;
if( pSel ){
while( pSel->pPrior ) pSel = pSel->pPrior;
- selectAddColumnTypeAndCollation(pParse, pTab, pSel);
+ sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSel);
}
}
}
static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){
#ifndef SQLITE_OMIT_SUBQUERY
Walker w;
- memset(&w, 0, sizeof(w));
+ w.xSelectCallback = sqlite3SelectWalkNoop;
w.xSelectCallback2 = selectAddSubqueryTypeInfo;
- w.xExprCallback = exprWalkNoop;
+ w.xExprCallback = sqlite3ExprWalkNoop;
w.pParse = pParse;
sqlite3WalkSelect(&w, pSelect);
#endif
Select *p, /* The SELECT statement being coded. */
NameContext *pOuterNC /* Name context for container */
){
- sqlite3 *db;
- if( NEVER(p==0) ) return;
- db = pParse->db;
- if( db->mallocFailed ) return;
+ assert( p!=0 || pParse->db->mallocFailed );
+ if( pParse->db->mallocFailed ) return;
if( p->selFlags & SF_HasTypeInfo ) return;
sqlite3SelectExpand(pParse, p);
- if( pParse->nErr || db->mallocFailed ) return;
+ if( pParse->nErr || pParse->db->mallocFailed ) return;
sqlite3ResolveSelectNames(pParse, p, pOuterNC);
- if( pParse->nErr || db->mallocFailed ) return;
+ if( pParse->nErr || pParse->db->mallocFailed ) return;
sqlite3SelectAddTypeInfo(pParse, p);
}
for(i=0, pF=pAggInfo->aFunc; i<pAggInfo->nFunc; i++, pF++){
ExprList *pList = pF->pExpr->x.pList;
assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) );
- sqlite3VdbeAddOp4(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0, 0,
- (void*)pF->pFunc, P4_FUNCDEF);
+ sqlite3VdbeAddOp2(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0);
+ sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF);
}
}
if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem;
sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ);
}
- sqlite3VdbeAddOp4(v, OP_AggStep0, 0, regAgg, pF->iMem,
- (void*)pF->pFunc, P4_FUNCDEF);
+ sqlite3VdbeAddOp3(v, OP_AggStep0, 0, regAgg, pF->iMem);
+ sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF);
sqlite3VdbeChangeP5(v, (u8)nArg);
sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg);
sqlite3ReleaseTempRange(pParse, regAgg, nArg);
# define explainSimpleCount(a,b,c)
#endif
+/*
+** sqlite3WalkExpr() callback used by havingToWhere().
+**
+** If the node passed to the callback is a TK_AND node, return
+** WRC_Continue to tell sqlite3WalkExpr() to iterate through child nodes.
+**
+** Otherwise, return WRC_Prune. In this case, also check if the
+** sub-expression matches the criteria for being moved to the WHERE
+** clause. If so, add it to the WHERE clause and replace the sub-expression
+** within the HAVING expression with a constant "1".
+*/
+static int havingToWhereExprCb(Walker *pWalker, Expr *pExpr){
+ if( pExpr->op!=TK_AND ){
+ Select *pS = pWalker->u.pSelect;
+ if( sqlite3ExprIsConstantOrGroupBy(pWalker->pParse, pExpr, pS->pGroupBy) ){
+ sqlite3 *db = pWalker->pParse->db;
+ Expr *pNew = sqlite3ExprAlloc(db, TK_INTEGER, &sqlite3IntTokens[1], 0);
+ if( pNew ){
+ Expr *pWhere = pS->pWhere;
+ SWAP(Expr, *pNew, *pExpr);
+ pNew = sqlite3ExprAnd(db, pWhere, pNew);
+ pS->pWhere = pNew;
+ pWalker->eCode = 1;
+ }
+ }
+ return WRC_Prune;
+ }
+ return WRC_Continue;
+}
+
+/*
+** Transfer eligible terms from the HAVING clause of a query, which is
+** processed after grouping, to the WHERE clause, which is processed before
+** grouping. For example, the query:
+**
+** SELECT * FROM <tables> WHERE a=? GROUP BY b HAVING b=? AND c=?
+**
+** can be rewritten as:
+**
+** SELECT * FROM <tables> WHERE a=? AND b=? GROUP BY b HAVING c=?
+**
+** A term of the HAVING expression is eligible for transfer if it consists
+** entirely of constants and expressions that are also GROUP BY terms that
+** use the "BINARY" collation sequence.
+*/
+static void havingToWhere(Parse *pParse, Select *p){
+ Walker sWalker;
+ memset(&sWalker, 0, sizeof(sWalker));
+ sWalker.pParse = pParse;
+ sWalker.xExprCallback = havingToWhereExprCb;
+ sWalker.u.pSelect = p;
+ sqlite3WalkExpr(&sWalker, p->pHaving);
+#if SELECTTRACE_ENABLED
+ if( sWalker.eCode && (sqlite3SelectTrace & 0x100)!=0 ){
+ SELECTTRACE(0x100,pParse,p,("Move HAVING terms into WHERE:\n"));
+ sqlite3TreeViewSelect(0, p, 0);
+ }
+#endif
+}
+
+/*
+** Check to see if the pThis entry of pTabList is a self-join of a prior view.
+** If it is, then return the SrcList_item for the prior view. If it is not,
+** then return 0.
+*/
+static struct SrcList_item *isSelfJoinView(
+ SrcList *pTabList, /* Search for self-joins in this FROM clause */
+ struct SrcList_item *pThis /* Search for prior reference to this subquery */
+){
+ struct SrcList_item *pItem;
+ for(pItem = pTabList->a; pItem<pThis; pItem++){
+ if( pItem->pSelect==0 ) continue;
+ if( pItem->fg.viaCoroutine ) continue;
+ if( pItem->zName==0 ) continue;
+ if( sqlite3_stricmp(pItem->zDatabase, pThis->zDatabase)!=0 ) continue;
+ if( sqlite3_stricmp(pItem->zName, pThis->zName)!=0 ) continue;
+ if( sqlite3ExprCompare(0,
+ pThis->pSelect->pWhere, pItem->pSelect->pWhere, -1)
+ ){
+ /* The view was modified by some other optimization such as
+ ** pushDownWhereTerms() */
+ continue;
+ }
+ return pItem;
+ }
+ return 0;
+}
+
+#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION
+/*
+** Attempt to transform a query of the form
+**
+** SELECT count(*) FROM (SELECT x FROM t1 UNION ALL SELECT y FROM t2)
+**
+** Into this:
+**
+** SELECT (SELECT count(*) FROM t1)+(SELECT count(*) FROM t2)
+**
+** The transformation only works if all of the following are true:
+**
+** * The subquery is a UNION ALL of two or more terms
+** * There is no WHERE or GROUP BY or HAVING clauses on the subqueries
+** * The outer query is a simple count(*)
+**
+** Return TRUE if the optimization is undertaken.
+*/
+static int countOfViewOptimization(Parse *pParse, Select *p){
+ Select *pSub, *pPrior;
+ Expr *pExpr;
+ Expr *pCount;
+ sqlite3 *db;
+ if( (p->selFlags & SF_Aggregate)==0 ) return 0; /* This is an aggregate */
+ if( p->pEList->nExpr!=1 ) return 0; /* Single result column */
+ pExpr = p->pEList->a[0].pExpr;
+ if( pExpr->op!=TK_AGG_FUNCTION ) return 0; /* Result is an aggregate */
+ if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0; /* Is count() */
+ if( pExpr->x.pList!=0 ) return 0; /* Must be count(*) */
+ if( p->pSrc->nSrc!=1 ) return 0; /* One table in FROM */
+ pSub = p->pSrc->a[0].pSelect;
+ if( pSub==0 ) return 0; /* The FROM is a subquery */
+ if( pSub->pPrior==0 ) return 0; /* Must be a compound ry */
+ do{
+ if( pSub->op!=TK_ALL && pSub->pPrior ) return 0; /* Must be UNION ALL */
+ if( pSub->pWhere ) return 0; /* No WHERE clause */
+ if( pSub->selFlags & SF_Aggregate ) return 0; /* Not an aggregate */
+ pSub = pSub->pPrior; /* Repeat over compound */
+ }while( pSub );
+
+ /* If we reach this point then it is OK to perform the transformation */
+
+ db = pParse->db;
+ pCount = pExpr;
+ pExpr = 0;
+ pSub = p->pSrc->a[0].pSelect;
+ p->pSrc->a[0].pSelect = 0;
+ sqlite3SrcListDelete(db, p->pSrc);
+ p->pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*p->pSrc));
+ while( pSub ){
+ Expr *pTerm;
+ pPrior = pSub->pPrior;
+ pSub->pPrior = 0;
+ pSub->pNext = 0;
+ pSub->selFlags |= SF_Aggregate;
+ pSub->selFlags &= ~SF_Compound;
+ pSub->nSelectRow = 0;
+ sqlite3ExprListDelete(db, pSub->pEList);
+ pTerm = pPrior ? sqlite3ExprDup(db, pCount, 0) : pCount;
+ pSub->pEList = sqlite3ExprListAppend(pParse, 0, pTerm);
+ pTerm = sqlite3PExpr(pParse, TK_SELECT, 0, 0);
+ sqlite3PExprAddSelect(pParse, pTerm, pSub);
+ if( pExpr==0 ){
+ pExpr = pTerm;
+ }else{
+ pExpr = sqlite3PExpr(pParse, TK_PLUS, pTerm, pExpr);
+ }
+ pSub = pPrior;
+ }
+ p->pEList->a[0].pExpr = pExpr;
+ p->selFlags &= ~SF_Aggregate;
+
+#if SELECTTRACE_ENABLED
+ if( sqlite3SelectTrace & 0x400 ){
+ SELECTTRACE(0x400,pParse,p,("After count-of-view optimization:\n"));
+ sqlite3TreeViewSelect(0, p, 0);
+ }
+#endif
+ return 1;
+}
+#endif /* SQLITE_COUNTOFVIEW_OPTIMIZATION */
+
/*
** Generate code for the SELECT statement given in the p argument.
**
AggInfo sAggInfo; /* Information used by aggregate queries */
int iEnd; /* Address of the end of the query */
sqlite3 *db; /* The database connection */
+ ExprList *pMinMaxOrderBy = 0; /* Added ORDER BY for min/max queries */
+ u8 minMaxFlag; /* Flag for min/max queries */
#ifndef SQLITE_OMIT_EXPLAIN
int iRestoreSelectId = pParse->iSelectId;
if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1;
memset(&sAggInfo, 0, sizeof(sAggInfo));
#if SELECTTRACE_ENABLED
- pParse->nSelectIndent++;
SELECTTRACE(1,pParse,p, ("begin processing:\n"));
if( sqlite3SelectTrace & 0x100 ){
sqlite3TreeViewSelect(0, p, 0);
}
#endif
-
- /* If writing to memory or generating a set
- ** only a single column may be output.
- */
-#ifndef SQLITE_OMIT_SUBQUERY
- if( checkForMultiColumnSelectError(pParse, pDest, p->pEList->nExpr) ){
- goto select_end;
+ /* Get a pointer the VDBE under construction, allocating a new VDBE if one
+ ** does not already exist */
+ v = sqlite3GetVdbe(pParse);
+ if( v==0 ) goto select_end;
+ if( pDest->eDest==SRT_Output ){
+ generateColumnNames(pParse, p);
}
-#endif
- /* Try to flatten subqueries in the FROM clause up into the main query
+ /* Try to various optimizations (flattening subqueries, and strength
+ ** reduction of join operators) in the FROM clause up into the main query
*/
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
for(i=0; !p->pPrior && i<pTabList->nSrc; i++){
struct SrcList_item *pItem = &pTabList->a[i];
Select *pSub = pItem->pSelect;
- int isAggSub;
Table *pTab = pItem->pTab;
+
+ /* Convert LEFT JOIN into JOIN if there are terms of the right table
+ ** of the LEFT JOIN used in the WHERE clause.
+ */
+ if( (pItem->fg.jointype & JT_LEFT)!=0
+ && sqlite3ExprImpliesNonNullRow(p->pWhere, pItem->iCursor)
+ && OptimizationEnabled(db, SQLITE_SimplifyJoin)
+ ){
+ SELECTTRACE(0x100,pParse,p,
+ ("LEFT-JOIN simplifies to JOIN on term %d\n",i));
+ pItem->fg.jointype &= ~(JT_LEFT|JT_OUTER);
+ unsetJoinExpr(p->pWhere, pItem->iCursor);
+ }
+
+ /* No futher action if this term of the FROM clause is no a subquery */
if( pSub==0 ) continue;
/* Catch mismatch in the declared columns of a view and the number of
goto select_end;
}
- isAggSub = (pSub->selFlags & SF_Aggregate)!=0;
- if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){
+ /* Do not try to flatten an aggregate subquery.
+ **
+ ** Flattening an aggregate subquery is only possible if the outer query
+ ** is not a join. But if the outer query is not a join, then the subquery
+ ** will be implemented as a co-routine and there is no advantage to
+ ** flattening in that case.
+ */
+ if( (pSub->selFlags & SF_Aggregate)!=0 ) continue;
+ assert( pSub->pGroupBy==0 );
+
+ /* If the outer query contains a "complex" result set (that is,
+ ** if the result set of the outer query uses functions or subqueries)
+ ** and if the subquery contains an ORDER BY clause and if
+ ** it will be implemented as a co-routine, then do not flatten. This
+ ** restriction allows SQL constructs like this:
+ **
+ ** SELECT expensive_function(x)
+ ** FROM (SELECT x FROM tab ORDER BY y LIMIT 10);
+ **
+ ** The expensive_function() is only computed on the 10 rows that
+ ** are output, rather than every row of the table.
+ **
+ ** The requirement that the outer query have a complex result set
+ ** means that flattening does occur on simpler SQL constraints without
+ ** the expensive_function() like:
+ **
+ ** SELECT x FROM (SELECT x FROM tab ORDER BY y LIMIT 10);
+ */
+ if( pSub->pOrderBy!=0
+ && i==0
+ && (p->selFlags & SF_ComplexResult)!=0
+ && (pTabList->nSrc==1
+ || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0)
+ ){
+ continue;
+ }
+
+ if( flattenSubquery(pParse, p, i, isAgg) ){
/* This subquery can be absorbed into its parent. */
- if( isAggSub ){
- isAgg = 1;
- p->selFlags |= SF_Aggregate;
- }
i = -1;
}
pTabList = p->pSrc;
}
#endif
- /* Get a pointer the VDBE under construction, allocating a new VDBE if one
- ** does not already exist */
- v = sqlite3GetVdbe(pParse);
- if( v==0 ) goto select_end;
-
#ifndef SQLITE_OMIT_COMPOUND_SELECT
/* Handle compound SELECT statements using the separate multiSelect()
** procedure.
explainSetInteger(pParse->iSelectId, iRestoreSelectId);
#if SELECTTRACE_ENABLED
SELECTTRACE(1,pParse,p,("end compound-select processing\n"));
- pParse->nSelectIndent--;
#endif
return rc;
}
#endif
- /* Generate code for all sub-queries in the FROM clause
+ /* For each term in the FROM clause, do two things:
+ ** (1) Authorized unreferenced tables
+ ** (2) Generate code for all sub-queries
*/
-#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
for(i=0; i<pTabList->nSrc; i++){
struct SrcList_item *pItem = &pTabList->a[i];
SelectDest dest;
- Select *pSub = pItem->pSelect;
+ Select *pSub;
+#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
+ const char *zSavedAuthContext;
+#endif
+
+ /* Issue SQLITE_READ authorizations with a fake column name for any
+ ** tables that are referenced but from which no values are extracted.
+ ** Examples of where these kinds of null SQLITE_READ authorizations
+ ** would occur:
+ **
+ ** SELECT count(*) FROM t1; -- SQLITE_READ t1.""
+ ** SELECT t1.* FROM t1, t2; -- SQLITE_READ t2.""
+ **
+ ** The fake column name is an empty string. It is possible for a table to
+ ** have a column named by the empty string, in which case there is no way to
+ ** distinguish between an unreferenced table and an actual reference to the
+ ** "" column. The original design was for the fake column name to be a NULL,
+ ** which would be unambiguous. But legacy authorization callbacks might
+ ** assume the column name is non-NULL and segfault. The use of an empty
+ ** string for the fake column name seems safer.
+ */
+ if( pItem->colUsed==0 ){
+ sqlite3AuthCheck(pParse, SQLITE_READ, pItem->zName, "", pItem->zDatabase);
+ }
+
+#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
+ /* Generate code for all sub-queries in the FROM clause
+ */
+ pSub = pItem->pSelect;
if( pSub==0 ) continue;
/* Sometimes the code for a subquery will be generated more than
** to be invoked again. */
if( pItem->addrFillSub ){
if( pItem->fg.viaCoroutine==0 ){
+ /* The subroutine that manifests the view might be a one-time routine,
+ ** or it might need to be rerun on each iteration because it
+ ** encodes a correlated subquery. */
+ testcase( sqlite3VdbeGetOp(v, pItem->addrFillSub)->opcode==OP_Once );
sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub);
}
continue;
/* Make copies of constant WHERE-clause terms in the outer query down
** inside the subquery. This can help the subquery to run more efficiently.
*/
- if( (pItem->fg.jointype & JT_OUTER)==0
- && pushDownWhereTerms(db, pSub, p->pWhere, pItem->iCursor)
+ if( OptimizationEnabled(db, SQLITE_PushDown)
+ && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor,
+ (pItem->fg.jointype & JT_OUTER)!=0)
){
#if SELECTTRACE_ENABLED
if( sqlite3SelectTrace & 0x100 ){
sqlite3TreeViewSelect(0, p, 0);
}
#endif
+ }else{
+ SELECTTRACE(0x100,pParse,p,("Push-down not possible\n"));
}
+ zSavedAuthContext = pParse->zAuthContext;
+ pParse->zAuthContext = pItem->zName;
+
/* Generate code to implement the subquery
+ **
+ ** The subquery is implemented as a co-routine if the subquery is
+ ** guaranteed to be the outer loop (so that it does not need to be
+ ** computed more than once)
+ **
+ ** TODO: Are there other reasons beside (1) to use a co-routine
+ ** implementation?
*/
- if( pTabList->nSrc==1
- && (p->selFlags & SF_All)==0
- && OptimizationEnabled(db, SQLITE_SubqCoroutine)
+ if( i==0
+ && (pTabList->nSrc==1
+ || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) /* (1) */
){
/* Implement a co-routine that will return a single row of the result
** set on each invocation.
*/
int addrTop = sqlite3VdbeCurrentAddr(v)+1;
+
pItem->regReturn = ++pParse->nMem;
sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop);
VdbeComment((v, "%s", pItem->pTab->zName));
sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn);
explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
sqlite3Select(pParse, pSub, &dest);
- pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow);
+ pItem->pTab->nRowLogEst = pSub->nSelectRow;
pItem->fg.viaCoroutine = 1;
pItem->regResult = dest.iSdst;
- sqlite3VdbeAddOp1(v, OP_EndCoroutine, pItem->regReturn);
+ sqlite3VdbeEndCoroutine(v, pItem->regReturn);
sqlite3VdbeJumpHere(v, addrTop-1);
sqlite3ClearTempRegCache(pParse);
}else{
int topAddr;
int onceAddr = 0;
int retAddr;
+ struct SrcList_item *pPrior;
+
assert( pItem->addrFillSub==0 );
pItem->regReturn = ++pParse->nMem;
topAddr = sqlite3VdbeAddOp2(v, OP_Integer, 0, pItem->regReturn);
/* If the subquery is not correlated and if we are not inside of
** a trigger, then we only need to compute the value of the subquery
** once. */
- onceAddr = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+ onceAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
VdbeComment((v, "materialize \"%s\"", pItem->pTab->zName));
}else{
VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName));
}
- sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor);
- explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
- sqlite3Select(pParse, pSub, &dest);
- pItem->pTab->nRowLogEst = sqlite3LogEst(pSub->nSelectRow);
+ pPrior = isSelfJoinView(pTabList, pItem);
+ if( pPrior ){
+ sqlite3VdbeAddOp2(v, OP_OpenDup, pItem->iCursor, pPrior->iCursor);
+ explainSetInteger(pItem->iSelectId, pPrior->iSelectId);
+ assert( pPrior->pSelect!=0 );
+ pSub->nSelectRow = pPrior->pSelect->nSelectRow;
+ }else{
+ sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor);
+ explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
+ sqlite3Select(pParse, pSub, &dest);
+ }
+ pItem->pTab->nRowLogEst = pSub->nSelectRow;
if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr);
retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn);
VdbeComment((v, "end %s", pItem->pTab->zName));
}
if( db->mallocFailed ) goto select_end;
pParse->nHeight -= sqlite3SelectExprHeight(p);
- }
+ pParse->zAuthContext = zSavedAuthContext;
#endif
+ }
/* Various elements of the SELECT copied into local variables for
** convenience */
}
#endif
+#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION
+ if( OptimizationEnabled(db, SQLITE_QueryFlattener|SQLITE_CountOfView)
+ && countOfViewOptimization(pParse, p)
+ ){
+ if( db->mallocFailed ) goto select_end;
+ pEList = p->pEList;
+ pTabList = p->pSrc;
+ }
+#endif
+
/* If the query is DISTINCT with an ORDER BY but is not an aggregate, and
** if the select-list is the same as the ORDER BY list, then this query
** can be rewritten as a GROUP BY. In other words, this:
** the sDistinct.isTnct is still set. Hence, isTnct represents the
** original setting of the SF_Distinct flag, not the current setting */
assert( sDistinct.isTnct );
+
+#if SELECTTRACE_ENABLED
+ if( sqlite3SelectTrace & 0x400 ){
+ SELECTTRACE(0x400,pParse,p,("Transform DISTINCT into GROUP BY:\n"));
+ sqlite3TreeViewSelect(0, p, 0);
+ }
+#endif
}
/* If there is an ORDER BY clause, then create an ephemeral index to
/* Set the limiter.
*/
iEnd = sqlite3VdbeMakeLabel(v);
- p->nSelectRow = LARGEST_INT64;
+ if( (p->selFlags & SF_FixedLimit)==0 ){
+ p->nSelectRow = 320; /* 4 billion rows */
+ }
computeLimitRegisters(pParse, p, iEnd);
if( p->iLimit==0 && sSort.addrSortIndex>=0 ){
sqlite3VdbeChangeOpcode(v, sSort.addrSortIndex, OP_SorterOpen);
if( !isAgg && pGroupBy==0 ){
/* No aggregate functions and no GROUP BY clause */
u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0);
+ assert( WHERE_USE_LIMIT==SF_FixedLimit );
+ wctrlFlags |= p->selFlags & SF_FixedLimit;
/* Begin the database scan. */
+ SELECTTRACE(1,pParse,p,("WhereBegin\n"));
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy,
- p->pEList, wctrlFlags, 0);
+ p->pEList, wctrlFlags, p->nSelectRow);
if( pWInfo==0 ) goto select_end;
if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){
p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo);
}
if( sSort.pOrderBy ){
sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo);
+ sSort.bOrderedInnerLoop = sqlite3WhereOrderedInnerLoop(pWInfo);
if( sSort.nOBSat==sSort.pOrderBy->nExpr ){
sSort.pOrderBy = 0;
}
}
/* Use the standard inner loop. */
- selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest,
+ assert( p->pEList==pEList );
+ selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest,
sqlite3WhereContinueLabel(pWInfo),
sqlite3WhereBreakLabel(pWInfo));
for(k=pGroupBy->nExpr, pItem=pGroupBy->a; k>0; k--, pItem++){
pItem->u.x.iAlias = 0;
}
- if( p->nSelectRow>100 ) p->nSelectRow = 100;
+ assert( 66==sqlite3LogEst(100) );
+ if( p->nSelectRow>66 ) p->nSelectRow = 66;
}else{
- p->nSelectRow = 1;
+ assert( 0==sqlite3LogEst(1) );
+ p->nSelectRow = 0;
}
/* If there is both a GROUP BY and an ORDER BY clause and they are
sqlite3ExprAnalyzeAggList(&sNC, pEList);
sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy);
if( pHaving ){
+ if( pGroupBy ){
+ assert( pWhere==p->pWhere );
+ assert( pHaving==p->pHaving );
+ assert( pGroupBy==p->pGroupBy );
+ havingToWhere(pParse, p);
+ pWhere = p->pWhere;
+ }
sqlite3ExprAnalyzeAggregates(&sNC, pHaving);
}
sAggInfo.nAccumulator = sAggInfo.nColumn;
+ if( p->pGroupBy==0 && p->pHaving==0 && sAggInfo.nFunc==1 ){
+ minMaxFlag = minMaxQuery(db, sAggInfo.aFunc[0].pExpr, &pMinMaxOrderBy);
+ }else{
+ minMaxFlag = WHERE_ORDERBY_NORMAL;
+ }
for(i=0; i<sAggInfo.nFunc; i++){
assert( !ExprHasProperty(sAggInfo.aFunc[i].pExpr, EP_xIsSelect) );
sNC.ncFlags |= NC_InAggFunc;
}
sAggInfo.mxReg = pParse->nMem;
if( db->mallocFailed ) goto select_end;
+#if SELECTTRACE_ENABLED
+ if( sqlite3SelectTrace & 0x400 ){
+ int ii;
+ SELECTTRACE(0x400,pParse,p,("After aggregate analysis:\n"));
+ sqlite3TreeViewSelect(0, p, 0);
+ for(ii=0; ii<sAggInfo.nColumn; ii++){
+ sqlite3DebugPrintf("agg-column[%d] iMem=%d\n",
+ ii, sAggInfo.aCol[ii].iMem);
+ sqlite3TreeViewExpr(0, sAggInfo.aCol[ii].pExpr, 0);
+ }
+ for(ii=0; ii<sAggInfo.nFunc; ii++){
+ sqlite3DebugPrintf("agg-func[%d]: iMem=%d\n",
+ ii, sAggInfo.aFunc[ii].iMem);
+ sqlite3TreeViewExpr(0, sAggInfo.aFunc[ii].pExpr, 0);
+ }
+ }
+#endif
+
/* Processing for aggregates with GROUP BY is very different and
** much more complex than aggregates without a GROUP BY.
** in the right order to begin with.
*/
sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset);
+ SELECTTRACE(1,pParse,p,("WhereBegin\n"));
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0,
WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0
);
struct AggInfo_col *pCol = &sAggInfo.aCol[i];
if( pCol->iSorterColumn>=j ){
int r1 = j + regBase;
- int r2;
-
- r2 = sqlite3ExprCodeGetColumn(pParse,
- pCol->pTab, pCol->iColumn, pCol->iTable, r1, 0);
- if( r1!=r2 ){
- sqlite3VdbeAddOp2(v, OP_SCopy, r2, r1);
- }
+ sqlite3ExprCodeGetColumnToReg(pParse,
+ pCol->pTab, pCol->iColumn, pCol->iTable, r1);
j++;
}
}
sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
finalizeAggFunctions(pParse, &sAggInfo);
sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL);
- selectInnerLoop(pParse, p, p->pEList, -1, &sSort,
+ selectInnerLoop(pParse, p, -1, &sSort,
&sDistinct, pDest,
addrOutputRow+1, addrSetAbort);
sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
} /* endif pGroupBy. Begin aggregate queries without GROUP BY: */
else {
- ExprList *pDel = 0;
#ifndef SQLITE_OMIT_BTREECOUNT
Table *pTab;
if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){
}else
#endif /* SQLITE_OMIT_BTREECOUNT */
{
- /* Check if the query is of one of the following forms:
- **
- ** SELECT min(x) FROM ...
- ** SELECT max(x) FROM ...
- **
- ** If it is, then ask the code in where.c to attempt to sort results
- ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause.
- ** If where.c is able to produce results sorted in this order, then
- ** add vdbe code to break out of the processing loop after the
- ** first iteration (since the first iteration of the loop is
- ** guaranteed to operate on the row with the minimum or maximum
- ** value of x, the only row required).
- **
- ** A special flag must be passed to sqlite3WhereBegin() to slightly
- ** modify behavior as follows:
- **
- ** + If the query is a "SELECT min(x)", then the loop coded by
- ** where.c should not iterate over any values with a NULL value
- ** for x.
- **
- ** + The optimizer code in where.c (the thing that decides which
- ** index or indices to use) should place a different priority on
- ** satisfying the 'ORDER BY' clause than it does in other cases.
- ** Refer to code and comments in where.c for details.
- */
- ExprList *pMinMax = 0;
- u8 flag = WHERE_ORDERBY_NORMAL;
-
- assert( p->pGroupBy==0 );
- assert( flag==0 );
- if( p->pHaving==0 ){
- flag = minMaxQuery(&sAggInfo, &pMinMax);
- }
- assert( flag==0 || (pMinMax!=0 && pMinMax->nExpr==1) );
-
- if( flag ){
- pMinMax = sqlite3ExprListDup(db, pMinMax, 0);
- pDel = pMinMax;
- if( pMinMax && !db->mallocFailed ){
- pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0;
- pMinMax->a[0].pExpr->op = TK_COLUMN;
- }
- }
-
/* This case runs if the aggregate has no GROUP BY clause. The
** processing is much simpler since there is only a single row
** of output.
*/
+ assert( p->pGroupBy==0 );
resetAccumulator(pParse, &sAggInfo);
- pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMax,0,flag,0);
+
+ /* If this query is a candidate for the min/max optimization, then
+ ** minMaxFlag will have been previously set to either
+ ** WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX and pMinMaxOrderBy will
+ ** be an appropriate ORDER BY expression for the optimization.
+ */
+ assert( minMaxFlag==WHERE_ORDERBY_NORMAL || pMinMaxOrderBy!=0 );
+ assert( pMinMaxOrderBy==0 || pMinMaxOrderBy->nExpr==1 );
+
+ SELECTTRACE(1,pParse,p,("WhereBegin\n"));
+ pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMaxOrderBy,
+ 0, minMaxFlag, 0);
if( pWInfo==0 ){
- sqlite3ExprListDelete(db, pDel);
goto select_end;
}
updateAccumulator(pParse, &sAggInfo);
- assert( pMinMax==0 || pMinMax->nExpr==1 );
if( sqlite3WhereIsOrdered(pWInfo)>0 ){
sqlite3VdbeGoto(v, sqlite3WhereBreakLabel(pWInfo));
VdbeComment((v, "%s() by index",
- (flag==WHERE_ORDERBY_MIN?"min":"max")));
+ (minMaxFlag==WHERE_ORDERBY_MIN?"min":"max")));
}
sqlite3WhereEnd(pWInfo);
finalizeAggFunctions(pParse, &sAggInfo);
sSort.pOrderBy = 0;
sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL);
- selectInnerLoop(pParse, p, p->pEList, -1, 0, 0,
+ selectInnerLoop(pParse, p, -1, 0, 0,
pDest, addrEnd, addrEnd);
- sqlite3ExprListDelete(db, pDel);
}
sqlite3VdbeResolveLabel(v, addrEnd);
*/
select_end:
explainSetInteger(pParse->iSelectId, iRestoreSelectId);
-
- /* Identify column names if results of the SELECT are to be output.
- */
- if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){
- generateColumnNames(pParse, pTabList, pEList);
- }
-
+ sqlite3ExprListDelete(db, pMinMaxOrderBy);
sqlite3DbFree(db, sAggInfo.aCol);
sqlite3DbFree(db, sAggInfo.aFunc);
#if SELECTTRACE_ENABLED
SELECTTRACE(1,pParse,p,("end processing\n"));
- pParse->nSelectIndent--;
#endif
return rc;
}
** if they are not used.
*/
/* #include "sqliteInt.h" */
-/* #include <stdlib.h> */
-/* #include <string.h> */
#ifndef SQLITE_OMIT_GET_TABLE
return 0;
malloc_failed:
- p->rc = SQLITE_NOMEM;
+ p->rc = SQLITE_NOMEM_BKPT;
return 1;
}
** Instead, the entire table should be passed to sqlite3_free_table() when
** the calling procedure is finished using it.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
sqlite3 *db, /* The database on which the SQL executes */
const char *zSql, /* The SQL to be executed */
char ***pazResult, /* Write the result table here */
res.azResult = sqlite3_malloc64(sizeof(char*)*res.nAlloc );
if( res.azResult==0 ){
db->errCode = SQLITE_NOMEM;
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
res.azResult[0] = 0;
rc = sqlite3_exec(db, zSql, sqlite3_get_table_cb, &res, pzErrMsg);
if( azNew==0 ){
sqlite3_free_table(&res.azResult[1]);
db->errCode = SQLITE_NOMEM;
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
res.azResult = azNew;
}
/*
** This routine frees the space the sqlite3_get_table() malloced.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(
+SQLITE_API void sqlite3_free_table(
char **azResult /* Result returned from sqlite3_get_table() */
){
if( azResult ){
sqlite3ExprListDelete(db, pTmp->pExprList);
sqlite3SelectDelete(db, pTmp->pSelect);
sqlite3IdListDelete(db, pTmp->pIdList);
+ sqlite3DbFree(db, pTmp->zSpan);
sqlite3DbFree(db, pTmp);
}
int iDb; /* The database to store the trigger in */
Token *pName; /* The unqualified db name */
DbFixer sFix; /* State vector for the DB fixer */
- int iTabDb; /* Index of the database holding pTab */
assert( pName1!=0 ); /* pName1->z might be NULL, but not pName1 itself */
assert( pName2!=0 );
" trigger on table: %S", pTableName, 0);
goto trigger_cleanup;
}
- iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
#ifndef SQLITE_OMIT_AUTHORIZATION
{
+ int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema);
int code = SQLITE_CREATE_TRIGGER;
- const char *zDb = db->aDb[iTabDb].zName;
- const char *zDbTrig = isTemp ? db->aDb[1].zName : zDb;
+ const char *zDb = db->aDb[iTabDb].zDbSName;
+ const char *zDbTrig = isTemp ? db->aDb[1].zDbSName : zDb;
if( iTabDb==1 || isTemp ) code = SQLITE_CREATE_TEMP_TRIGGER;
if( sqlite3AuthCheck(pParse, code, zName, pTab->zName, zDbTrig) ){
goto trigger_cleanup;
pStepList->pTrig = pTrig;
pStepList = pStepList->pNext;
}
- nameToken.z = pTrig->zName;
- nameToken.n = sqlite3Strlen30(nameToken.z);
+ sqlite3TokenInit(&nameToken, pTrig->zName);
sqlite3FixInit(&sFix, pParse, iDb, "trigger", &nameToken);
if( sqlite3FixTriggerStep(&sFix, pTrig->step_list)
|| sqlite3FixExpr(&sFix, pTrig->pWhen)
if( v==0 ) goto triggerfinish_cleanup;
sqlite3BeginWriteOperation(pParse, 0, iDb);
z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n);
+ testcase( z==0 );
sqlite3NestedParse(pParse,
"INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')",
- db->aDb[iDb].zName, SCHEMA_TABLE(iDb), zName,
+ db->aDb[iDb].zDbSName, MASTER_NAME, zName,
pTrig->table, z);
sqlite3DbFree(db, z);
sqlite3ChangeCookie(pParse, iDb);
assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
pTrig = sqlite3HashInsert(pHash, zName, pTrig);
if( pTrig ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
}else if( pLink->pSchema==pLink->pTabSchema ){
Table *pTab;
pTab = sqlite3HashFind(&pLink->pTabSchema->tblHash, pLink->table);
sqlite3DeleteTriggerStep(db, pStepList);
}
+/*
+** Duplicate a range of text from an SQL statement, then convert all
+** whitespace characters into ordinary space characters.
+*/
+static char *triggerSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){
+ char *z = sqlite3DbSpanDup(db, zStart, zEnd);
+ int i;
+ if( z ) for(i=0; z[i]; i++) if( sqlite3Isspace(z[i]) ) z[i] = ' ';
+ return z;
+}
+
/*
** Turn a SELECT statement (that the pSelect parameter points to) into
** a trigger step. Return a pointer to a TriggerStep structure.
** The parser calls this routine when it finds a SELECT statement in
** body of a TRIGGER.
*/
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelect){
+SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(
+ sqlite3 *db, /* Database connection */
+ Select *pSelect, /* The SELECT statement */
+ const char *zStart, /* Start of SQL text */
+ const char *zEnd /* End of SQL text */
+){
TriggerStep *pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep));
if( pTriggerStep==0 ) {
sqlite3SelectDelete(db, pSelect);
pTriggerStep->op = TK_SELECT;
pTriggerStep->pSelect = pSelect;
pTriggerStep->orconf = OE_Default;
+ pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd);
return pTriggerStep;
}
static TriggerStep *triggerStepAllocate(
sqlite3 *db, /* Database connection */
u8 op, /* Trigger opcode */
- Token *pName /* The target name */
+ Token *pName, /* The target name */
+ const char *zStart, /* Start of SQL text */
+ const char *zEnd /* End of SQL text */
){
TriggerStep *pTriggerStep;
sqlite3Dequote(z);
pTriggerStep->zTarget = z;
pTriggerStep->op = op;
+ pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd);
}
return pTriggerStep;
}
Token *pTableName, /* Name of the table into which we insert */
IdList *pColumn, /* List of columns in pTableName to insert into */
Select *pSelect, /* A SELECT statement that supplies values */
- u8 orconf /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */
+ u8 orconf, /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */
+ const char *zStart, /* Start of SQL text */
+ const char *zEnd /* End of SQL text */
){
TriggerStep *pTriggerStep;
assert(pSelect != 0 || db->mallocFailed);
- pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName);
+ pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName, zStart, zEnd);
if( pTriggerStep ){
pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE);
pTriggerStep->pIdList = pColumn;
Token *pTableName, /* Name of the table to be updated */
ExprList *pEList, /* The SET clause: list of column and new values */
Expr *pWhere, /* The WHERE clause */
- u8 orconf /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */
+ u8 orconf, /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */
+ const char *zStart, /* Start of SQL text */
+ const char *zEnd /* End of SQL text */
){
TriggerStep *pTriggerStep;
- pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName);
+ pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName, zStart, zEnd);
if( pTriggerStep ){
pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE);
pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE);
SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(
sqlite3 *db, /* Database connection */
Token *pTableName, /* The table from which rows are deleted */
- Expr *pWhere /* The WHERE clause */
+ Expr *pWhere, /* The WHERE clause */
+ const char *zStart, /* Start of SQL text */
+ const char *zEnd /* End of SQL text */
){
TriggerStep *pTriggerStep;
- pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName);
+ pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName, zStart, zEnd);
if( pTriggerStep ){
pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE);
pTriggerStep->orconf = OE_Default;
assert( zDb!=0 || sqlite3BtreeHoldsAllMutexes(db) );
for(i=OMIT_TEMPDB; i<db->nDb; i++){
int j = (i<2) ? i^1 : i; /* Search TEMP before MAIN */
- if( zDb && sqlite3StrICmp(db->aDb[j].zName, zDb) ) continue;
+ if( zDb && sqlite3StrICmp(db->aDb[j].zDbSName, zDb) ) continue;
assert( sqlite3SchemaMutexHeld(db, j, 0) );
pTrigger = sqlite3HashFind(&(db->aDb[j].pSchema->trigHash), zName);
if( pTrigger ) break;
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int code = SQLITE_DROP_TRIGGER;
- const char *zDb = db->aDb[iDb].zName;
+ const char *zDb = db->aDb[iDb].zDbSName;
const char *zTab = SCHEMA_TABLE(iDb);
if( iDb==1 ) code = SQLITE_DROP_TEMP_TRIGGER;
if( sqlite3AuthCheck(pParse, code, pTrigger->zName, pTable->zName, zDb) ||
*/
assert( pTable!=0 );
if( (v = sqlite3GetVdbe(pParse))!=0 ){
- int base;
- static const int iLn = VDBE_OFFSET_LINENO(2);
- static const VdbeOpList dropTrigger[] = {
- { OP_Rewind, 0, ADDR(9), 0},
- { OP_String8, 0, 1, 0}, /* 1 */
- { OP_Column, 0, 1, 2},
- { OP_Ne, 2, ADDR(8), 1},
- { OP_String8, 0, 1, 0}, /* 4: "trigger" */
- { OP_Column, 0, 0, 2},
- { OP_Ne, 2, ADDR(8), 1},
- { OP_Delete, 0, 0, 0},
- { OP_Next, 0, ADDR(1), 0}, /* 8 */
- };
-
- sqlite3BeginWriteOperation(pParse, 0, iDb);
- sqlite3OpenMasterTable(pParse, iDb);
- base = sqlite3VdbeAddOpList(v, ArraySize(dropTrigger), dropTrigger, iLn);
- sqlite3VdbeChangeP4(v, base+1, pTrigger->zName, P4_TRANSIENT);
- sqlite3VdbeChangeP4(v, base+4, "trigger", P4_STATIC);
+ sqlite3NestedParse(pParse,
+ "DELETE FROM %Q.%s WHERE name=%Q AND type='trigger'",
+ db->aDb[iDb].zDbSName, MASTER_NAME, pTrigger->zName
+ );
sqlite3ChangeCookie(pParse, iDb);
- sqlite3VdbeAddOp2(v, OP_Close, 0, 0);
sqlite3VdbeAddOp4(v, OP_DropTrigger, iDb, 0, 0, pTrigger->zName, 0);
- if( pParse->nMem<3 ){
- pParse->nMem = 3;
- }
}
}
*pp = (*pp)->pNext;
}
sqlite3DeleteTrigger(db, pTrigger);
- db->flags |= SQLITE_InternChanges;
+ db->mDbFlags |= DBFLAG_SchemaChange;
}
}
pSrc->a[pSrc->nSrc-1].zName = sqlite3DbStrDup(db, pStep->zTarget);
iDb = sqlite3SchemaToIndex(db, pStep->pTrig->pSchema);
if( iDb==0 || iDb>=2 ){
+ const char *zDb;
assert( iDb<db->nDb );
- pSrc->a[pSrc->nSrc-1].zDatabase = sqlite3DbStrDup(db, db->aDb[iDb].zName);
+ zDb = db->aDb[iDb].zDbSName;
+ pSrc->a[pSrc->nSrc-1].zDatabase = sqlite3DbStrDup(db, zDb);
}
}
return pSrc;
pParse->eOrconf = (orconf==OE_Default)?pStep->orconf:(u8)orconf;
assert( pParse->okConstFactor==0 );
+#ifndef SQLITE_OMIT_TRACE
+ if( pStep->zSpan ){
+ sqlite3VdbeAddOp4(v, OP_Trace, 0x7fffffff, 1, 0,
+ sqlite3MPrintf(db, "-- %s", pStep->zSpan),
+ P4_DYNAMIC);
+ }
+#endif
+
switch( pStep->op ){
case TK_UPDATE: {
sqlite3Update(pParse,
targetSrcList(pParse, pStep),
sqlite3ExprListDup(db, pStep->pExprList, 0),
sqlite3ExprDup(db, pStep->pWhere, 0),
- pParse->eOrconf
+ pParse->eOrconf, 0, 0
);
break;
}
case TK_DELETE: {
sqlite3DeleteFrom(pParse,
targetSrcList(pParse, pStep),
- sqlite3ExprDup(db, pStep->pWhere, 0)
+ sqlite3ExprDup(db, pStep->pWhere, 0), 0, 0
);
break;
}
pTab->zName
));
#ifndef SQLITE_OMIT_TRACE
- sqlite3VdbeChangeP4(v, -1,
- sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC
- );
+ if( pTrigger->zName ){
+ sqlite3VdbeChangeP4(v, -1,
+ sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC
+ );
+ }
#endif
/* If one was specified, code the WHEN clause. If it evaluates to false
VdbeComment((v, "End: %s.%s", pTrigger->zName, onErrorText(orconf)));
transferParseError(pParse, pSubParse);
- if( db->mallocFailed==0 ){
+ if( db->mallocFailed==0 && pParse->nErr==0 ){
pProgram->aOp = sqlite3VdbeTakeOpArray(v, &pProgram->nOp, &pTop->nMaxArg);
}
pProgram->nMem = pSubParse->nMem;
pProgram->nCsr = pSubParse->nTab;
- pProgram->nOnce = pSubParse->nOnce;
pProgram->token = (void *)pTrigger;
pPrg->aColmask[0] = pSubParse->oldmask;
pPrg->aColmask[1] = pSubParse->newmask;
if( pPrg ){
int bRecursive = (p->zName && 0==(pParse->db->flags&SQLITE_RecTriggers));
- sqlite3VdbeAddOp3(v, OP_Program, reg, ignoreJump, ++pParse->nMem);
- sqlite3VdbeChangeP4(v, -1, (const char *)pPrg->pProgram, P4_SUBPROGRAM);
+ sqlite3VdbeAddOp4(v, OP_Program, reg, ignoreJump, ++pParse->nMem,
+ (const char *)pPrg->pProgram, P4_SUBPROGRAM);
VdbeComment(
(v, "Call: %s.%s", (p->zName?p->zName:"fkey"), onErrorText(orconf)));
sqlite3ValueFromExpr(sqlite3VdbeDb(v), pCol->pDflt, enc,
pCol->affinity, &pValue);
if( pValue ){
- sqlite3VdbeChangeP4(v, -1, (const char *)pValue, P4_MEM);
+ sqlite3VdbeAppendP4(v, pValue, P4_MEM);
}
+ }
#ifndef SQLITE_OMIT_FLOATING_POINT
- if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){
- sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg);
- }
-#endif
+ if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){
+ sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg);
}
+#endif
}
/*
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
- int onError /* How to handle constraint errors */
+ int onError, /* How to handle constraint errors */
+ ExprList *pOrderBy, /* ORDER BY clause. May be null */
+ Expr *pLimit /* LIMIT clause. May be null */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int iDataCur; /* Cursor for the canonical data btree */
int iIdxCur; /* Cursor for the first index */
sqlite3 *db; /* The database structure */
- int *aRegIdx = 0; /* One register assigned to each index to be updated */
+ int *aRegIdx = 0; /* First register in array assigned to each index */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
- int okOnePass; /* True for one-pass algorithm without the FIFO */
+ int eOnePass; /* ONEPASS_XXX value from where.c */
int hasFK; /* True if foreign key processing is required */
int labelBreak; /* Jump here to break out of UPDATE loop */
int labelContinue; /* Jump here to continue next step of UPDATE loop */
+ int flags; /* Flags for sqlite3WhereBegin() */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
int iEph = 0; /* Ephemeral table holding all primary key values */
int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
+ int addrOpen = 0; /* Address of OP_OpenEphemeral */
+ int iPk = 0; /* First of nPk cells holding PRIMARY KEY value */
+ i16 nPk = 0; /* Number of components of the PRIMARY KEY */
+ int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
# define isView 0
#endif
+#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT
+ if( !isView ){
+ pWhere = sqlite3LimitWhere(
+ pParse, pTabList, pWhere, pOrderBy, pLimit, "UPDATE"
+ );
+ pOrderBy = 0;
+ pLimit = 0;
+ }
+#endif
+
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
/* Allocate space for aXRef[], aRegIdx[], and aToOpen[].
** Initialize aXRef[] and aToOpen[] to their default values.
*/
- aXRef = sqlite3DbMallocRaw(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
+ aXRef = sqlite3DbMallocRawNN(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
if( aXRef==0 ) goto update_cleanup;
aRegIdx = aXRef+pTab->nCol;
aToOpen = (u8*)(aRegIdx+nIdx);
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
j<0 ? "ROWID" : pTab->aCol[j].zName,
- db->aDb[iDb].zName);
+ db->aDb[iDb].zDbSName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
assert( chngPk==0 || chngPk==1 );
chngKey = chngRowid + chngPk;
- /* The SET expressions are not actually used inside the WHERE loop.
- ** So reset the colUsed mask
+ /* The SET expressions are not actually used inside the WHERE loop.
+ ** So reset the colUsed mask. Unless this is a virtual table. In that
+ ** case, set all bits of the colUsed mask (to ensure that the virtual
+ ** table implementation makes all columns available).
*/
- pTabList->a[0].colUsed = 0;
+ pTabList->a[0].colUsed = IsVirtual(pTab) ? ALLBITS : 0;
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);
*/
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
- if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){
+ if( chngKey || hasFK>1 || pIdx->pPartIdxWhere || pIdx==pPk ){
reg = ++pParse->nMem;
+ pParse->nMem += pIdx->nColumn;
}else{
reg = 0;
for(i=0; i<pIdx->nKeyCol; i++){
i16 iIdxCol = pIdx->aiColumn[i];
if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){
reg = ++pParse->nMem;
+ pParse->nMem += pIdx->nColumn;
+ if( (onError==OE_Replace)
+ || (onError==OE_Default && pIdx->onError==OE_Replace)
+ ){
+ bReplace = 1;
+ }
break;
}
}
if( reg==0 ) aToOpen[j+1] = 0;
aRegIdx[j] = reg;
}
+ if( bReplace ){
+ /* If REPLACE conflict resolution might be invoked, open cursors on all
+ ** indexes in case they are needed to delete records. */
+ memset(aToOpen, 1, nIdx+1);
+ }
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
- sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur);
+ sqlite3MaterializeView(pParse, pTab,
+ pWhere, pOrderBy, pLimit, iDataCur
+ );
+ pOrderBy = 0;
+ pLimit = 0;
}
#endif
}
#endif
- /* Begin the database scan
- */
+ /* Initialize the count of updated rows */
+ if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
+ regRowCount = ++pParse->nMem;
+ sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
+ }
+
if( HasRowid(pTab) ){
sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid);
- pWInfo = sqlite3WhereBegin(
- pParse, pTabList, pWhere, 0, 0, WHERE_ONEPASS_DESIRED, iIdxCur
- );
- if( pWInfo==0 ) goto update_cleanup;
- okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
-
- /* Remember the rowid of every item to be updated.
- */
- sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
- if( !okOnePass ){
- sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
- }
-
- /* End the database scan loop.
- */
- sqlite3WhereEnd(pWInfo);
}else{
- int iPk; /* First of nPk memory cells holding PRIMARY KEY value */
- i16 nPk; /* Number of components of the PRIMARY KEY */
- int addrOpen; /* Address of the OpenEphemeral instruction */
-
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
regKey = ++pParse->nMem;
iEph = pParse->nTab++;
+
sqlite3VdbeAddOp2(v, OP_Null, 0, iPk);
addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
- pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0,
- WHERE_ONEPASS_DESIRED, iIdxCur);
- if( pWInfo==0 ) goto update_cleanup;
- okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
+ }
+
+ /* Begin the database scan.
+ **
+ ** Do not consider a single-pass strategy for a multi-row update if
+ ** there are any triggers or foreign keys to process, or rows may
+ ** be deleted as a result of REPLACE conflict handling. Any of these
+ ** things might disturb a cursor being used to scan through the table
+ ** or index, causing a single-pass approach to malfunction. */
+ flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE;
+ if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){
+ flags |= WHERE_ONEPASS_MULTIROW;
+ }
+ pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur);
+ if( pWInfo==0 ) goto update_cleanup;
+
+ /* A one-pass strategy that might update more than one row may not
+ ** be used if any column of the index used for the scan is being
+ ** updated. Otherwise, if there is an index on "b", statements like
+ ** the following could create an infinite loop:
+ **
+ ** UPDATE t1 SET b=b+1 WHERE b>?
+ **
+ ** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI
+ ** strategy that uses an index for which one or more columns are being
+ ** updated. */
+ eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
+ if( eOnePass==ONEPASS_MULTI ){
+ int iCur = aiCurOnePass[1];
+ if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){
+ eOnePass = ONEPASS_OFF;
+ }
+ assert( iCur!=iDataCur || !HasRowid(pTab) );
+ }
+
+ if( HasRowid(pTab) ){
+ /* Read the rowid of the current row of the WHERE scan. In ONEPASS_OFF
+ ** mode, write the rowid into the FIFO. In either of the one-pass modes,
+ ** leave it in register regOldRowid. */
+ sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
+ if( eOnePass==ONEPASS_OFF ){
+ sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
+ }
+ }else{
+ /* Read the PK of the current row into an array of registers. In
+ ** ONEPASS_OFF mode, serialize the array into a record and store it in
+ ** the ephemeral table. Or, in ONEPASS_SINGLE or MULTI mode, change
+ ** the OP_OpenEphemeral instruction to a Noop (the ephemeral table
+ ** is not required) and leave the PK fields in the array of registers. */
for(i=0; i<nPk; i++){
assert( pPk->aiColumn[i]>=0 );
- sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pPk->aiColumn[i],
- iPk+i);
+ sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur,pPk->aiColumn[i],iPk+i);
}
- if( okOnePass ){
+ if( eOnePass ){
sqlite3VdbeChangeToNoop(v, addrOpen);
nKey = nPk;
regKey = iPk;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey,
sqlite3IndexAffinityStr(db, pPk), nPk);
- sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEph, regKey, iPk, nPk);
}
- sqlite3WhereEnd(pWInfo);
}
- /* Initialize the count of updated rows
- */
- if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
- regRowCount = ++pParse->nMem;
- sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
+ if( eOnePass!=ONEPASS_MULTI ){
+ sqlite3WhereEnd(pWInfo);
}
labelBreak = sqlite3VdbeMakeLabel(v);
if( !isView ){
- /*
- ** Open every index that needs updating. Note that if any
- ** index could potentially invoke a REPLACE conflict resolution
- ** action, then we need to open all indices because we might need
- ** to be deleting some records.
- */
- if( onError==OE_Replace ){
- memset(aToOpen, 1, nIdx+1);
- }else{
- for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
- if( pIdx->onError==OE_Replace ){
- memset(aToOpen, 1, nIdx+1);
- break;
- }
- }
- }
- if( okOnePass ){
+ int addrOnce = 0;
+
+ /* Open every index that needs updating. */
+ if( eOnePass!=ONEPASS_OFF ){
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0;
}
- sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, iBaseCur, aToOpen,
+
+ if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){
+ addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
+ }
+ sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen,
0, 0);
+ if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
}
/* Top of the update loop */
- if( okOnePass ){
- if( aToOpen[iDataCur-iBaseCur] && !isView ){
+ if( eOnePass!=ONEPASS_OFF ){
+ if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){
assert( pPk );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey);
VdbeCoverageNeverTaken(v);
}
- labelContinue = labelBreak;
+ if( eOnePass==ONEPASS_SINGLE ){
+ labelContinue = labelBreak;
+ }else{
+ labelContinue = sqlite3VdbeMakeLabel(v);
+ }
sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
VdbeCoverageIf(v, pPk==0);
VdbeCoverageIf(v, pPk!=0);
}else if( pPk ){
labelContinue = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
- addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey);
+ addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey);
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0);
VdbeCoverage(v);
}else{
*/
testcase( i==31 );
testcase( i==32 );
- sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
+ sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}
if( !isView ){
int addr1 = 0; /* Address of jump instruction */
- int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Do constraint checks. */
assert( regOldRowid>0 );
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
- regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace);
+ regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace,
+ aXRef);
/* Do FK constraint checks. */
if( hasFK ){
VdbeCoverageNeverTaken(v);
}
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1);
-
- /* If changing the record number, delete the old record. */
- if( hasFK || chngKey || pPk!=0 ){
+
+ /* If changing the rowid value, or if there are foreign key constraints
+ ** to process, delete the old record. Otherwise, add a noop OP_Delete
+ ** to invoke the pre-update hook.
+ **
+ ** That (regNew==regnewRowid+1) is true is also important for the
+ ** pre-update hook. If the caller invokes preupdate_new(), the returned
+ ** value is copied from memory cell (regNewRowid+1+iCol), where iCol
+ ** is the column index supplied by the user.
+ */
+ assert( regNew==regNewRowid+1 );
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+ sqlite3VdbeAddOp3(v, OP_Delete, iDataCur,
+ OPFLAG_ISUPDATE | ((hasFK>1 || chngKey) ? 0 : OPFLAG_ISNOOP),
+ regNewRowid
+ );
+ if( eOnePass==ONEPASS_MULTI ){
+ assert( hasFK==0 && chngKey==0 );
+ sqlite3VdbeChangeP5(v, OPFLAG_SAVEPOSITION);
+ }
+ if( !pParse->nested ){
+ sqlite3VdbeAppendP4(v, pTab, P4_TABLE);
+ }
+#else
+ if( hasFK>1 || chngKey ){
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0);
}
+#endif
if( bReplace || chngKey ){
sqlite3VdbeJumpHere(v, addr1);
}
}
/* Insert the new index entries and the new record. */
- sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur,
- regNewRowid, aRegIdx, 1, 0, 0);
+ sqlite3CompleteInsertion(
+ pParse, pTab, iDataCur, iIdxCur, regNewRowid, aRegIdx,
+ OPFLAG_ISUPDATE | (eOnePass==ONEPASS_MULTI ? OPFLAG_SAVEPOSITION : 0),
+ 0, 0
+ );
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
- if( okOnePass ){
+ if( eOnePass==ONEPASS_SINGLE ){
/* Nothing to do at end-of-loop for a single-pass */
+ }else if( eOnePass==ONEPASS_MULTI ){
+ sqlite3VdbeResolveLabel(v, labelContinue);
+ sqlite3WhereEnd(pWInfo);
}else if( pPk ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v);
}
sqlite3VdbeResolveLabel(v, labelBreak);
- /* Close all tables */
- for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
- assert( aRegIdx );
- if( aToOpen[i+1] ){
- sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0);
- }
- }
- if( iDataCur<iIdxCur ) sqlite3VdbeAddOp2(v, OP_Close, iDataCur, 0);
-
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
+#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT)
+ sqlite3ExprListDelete(db, pOrderBy);
+ sqlite3ExprDelete(db, pLimit);
+#endif
return;
}
/* Make sure "isView" and other macros defined above are undefined. Otherwise
int bOnePass; /* True to use onepass strategy */
int addr; /* Address of OP_OpenEphemeral */
- /* Allocate nArg registers to martial the arguments to VUpdate. Then
+ /* Allocate nArg registers in which to gather the arguments for VUpdate. Then
** create and open the ephemeral table in which the records created from
** these arguments will be temporarily stored. */
assert( v );
if( pWInfo==0 ) return;
/* Populate the argument registers. */
- sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg);
- if( pRowid ){
- sqlite3ExprCode(pParse, pRowid, regArg+1);
- }else{
- sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1);
- }
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]>=0 ){
sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i);
}else{
sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i);
+ sqlite3VdbeChangeP5(v, 1); /* Enable sqlite3_vtab_nochange() */
}
}
+ if( HasRowid(pTab) ){
+ sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg);
+ if( pRowid ){
+ sqlite3ExprCode(pParse, pRowid, regArg+1);
+ }else{
+ sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1);
+ }
+ }else{
+ Index *pPk; /* PRIMARY KEY index */
+ i16 iPk; /* PRIMARY KEY column */
+ pPk = sqlite3PrimaryKeyIndex(pTab);
+ assert( pPk!=0 );
+ assert( pPk->nKeyCol==1 );
+ iPk = pPk->aiColumn[0];
+ sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, iPk, regArg);
+ sqlite3VdbeAddOp2(v, OP_SCopy, regArg+2+iPk, regArg+1);
+ }
bOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy);
/* Create a record from the argument register contents and insert it into
** the ephemeral table. */
sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec);
+#ifdef SQLITE_DEBUG
+ /* Signal an assert() within OP_MakeRecord that it is allowed to
+ ** accept no-change records with serial_type 10 */
+ sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG_MAGIC);
+#endif
sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid);
sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid);
}
/* #include "vdbeInt.h" */
#if !defined(SQLITE_OMIT_VACUUM) && !defined(SQLITE_OMIT_ATTACH)
-/*
-** Finalize a prepared statement. If there was an error, store the
-** text of the error message in *pzErrMsg. Return the result code.
-*/
-static int vacuumFinalize(sqlite3 *db, sqlite3_stmt *pStmt, char **pzErrMsg){
- int rc;
- rc = sqlite3VdbeFinalize((Vdbe*)pStmt);
- if( rc ){
- sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
- }
- return rc;
-}
/*
-** Execute zSql on database db. Return an error code.
+** Execute zSql on database db.
+**
+** If zSql returns rows, then each row will have exactly one
+** column. (This will only happen if zSql begins with "SELECT".)
+** Take each row of result and call execSql() again recursively.
+**
+** The execSqlF() routine does the same thing, except it accepts
+** a format string as its third argument
*/
static int execSql(sqlite3 *db, char **pzErrMsg, const char *zSql){
- sqlite3_stmt *pStmt;
- VVA_ONLY( int rc; )
- if( !zSql ){
- return SQLITE_NOMEM;
- }
- if( SQLITE_OK!=sqlite3_prepare(db, zSql, -1, &pStmt, 0) ){
- sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
- return sqlite3_errcode(db);
- }
- VVA_ONLY( rc = ) sqlite3_step(pStmt);
- assert( rc!=SQLITE_ROW || (db->flags&SQLITE_CountRows) );
- return vacuumFinalize(db, pStmt, pzErrMsg);
-}
-
-/*
-** Execute zSql on database db. The statement returns exactly
-** one column. Execute this as SQL on the same database.
-*/
-static int execExecSql(sqlite3 *db, char **pzErrMsg, const char *zSql){
sqlite3_stmt *pStmt;
int rc;
- rc = sqlite3_prepare(db, zSql, -1, &pStmt, 0);
+ /* printf("SQL: [%s]\n", zSql); fflush(stdout); */
+ rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0);
if( rc!=SQLITE_OK ) return rc;
-
- while( SQLITE_ROW==sqlite3_step(pStmt) ){
- rc = execSql(db, pzErrMsg, (char*)sqlite3_column_text(pStmt, 0));
- if( rc!=SQLITE_OK ){
- vacuumFinalize(db, pStmt, pzErrMsg);
- return rc;
+ while( SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){
+ const char *zSubSql = (const char*)sqlite3_column_text(pStmt,0);
+ assert( sqlite3_strnicmp(zSql,"SELECT",6)==0 );
+ assert( sqlite3_strnicmp(zSubSql,"SELECT",6)!=0 || CORRUPT_DB );
+ if( zSubSql && zSubSql[0]!='S' ){
+ rc = execSql(db, pzErrMsg, zSubSql);
+ if( rc!=SQLITE_OK ) break;
}
}
-
- return vacuumFinalize(db, pStmt, pzErrMsg);
+ assert( rc!=SQLITE_ROW );
+ if( rc==SQLITE_DONE ) rc = SQLITE_OK;
+ if( rc ){
+ sqlite3SetString(pzErrMsg, db, sqlite3_errmsg(db));
+ }
+ (void)sqlite3_finalize(pStmt);
+ return rc;
+}
+static int execSqlF(sqlite3 *db, char **pzErrMsg, const char *zSql, ...){
+ char *z;
+ va_list ap;
+ int rc;
+ va_start(ap, zSql);
+ z = sqlite3VMPrintf(db, zSql, ap);
+ va_end(ap);
+ if( z==0 ) return SQLITE_NOMEM;
+ rc = execSql(db, pzErrMsg, z);
+ sqlite3DbFree(db, z);
+ return rc;
}
/*
** transient would cause the database file to appear to be deleted
** following reboot.
*/
-SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){
+SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse, Token *pNm){
Vdbe *v = sqlite3GetVdbe(pParse);
- if( v ){
- sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0);
- sqlite3VdbeUsesBtree(v, 0);
+ int iDb = 0;
+ if( v==0 ) return;
+ if( pNm ){
+#ifndef SQLITE_BUG_COMPATIBLE_20160819
+ /* Default behavior: Report an error if the argument to VACUUM is
+ ** not recognized */
+ iDb = sqlite3TwoPartName(pParse, pNm, pNm, &pNm);
+ if( iDb<0 ) return;
+#else
+ /* When SQLITE_BUG_COMPATIBLE_20160819 is defined, unrecognized arguments
+ ** to VACUUM are silently ignored. This is a back-out of a bug fix that
+ ** occurred on 2016-08-19 (https://www.sqlite.org/src/info/083f9e6270).
+ ** The buggy behavior is required for binary compatibility with some
+ ** legacy applications. */
+ iDb = sqlite3FindDb(pParse->db, pNm);
+ if( iDb<0 ) iDb = 0;
+#endif
+ }
+ if( iDb!=1 ){
+ sqlite3VdbeAddOp1(v, OP_Vacuum, iDb);
+ sqlite3VdbeUsesBtree(v, iDb);
}
return;
}
/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/
-SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){
+SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){
int rc = SQLITE_OK; /* Return code from service routines */
Btree *pMain; /* The database being vacuumed */
Btree *pTemp; /* The temporary database we vacuum into */
- char *zSql = 0; /* SQL statements */
- int saved_flags; /* Saved value of the db->flags */
+ u16 saved_mDbFlags; /* Saved value of db->mDbFlags */
+ u32 saved_flags; /* Saved value of db->flags */
int saved_nChange; /* Saved value of db->nChange */
int saved_nTotalChange; /* Saved value of db->nTotalChange */
- void (*saved_xTrace)(void*,const char*); /* Saved db->xTrace */
+ u8 saved_mTrace; /* Saved trace settings */
Db *pDb = 0; /* Database to detach at end of vacuum */
int isMemDb; /* True if vacuuming a :memory: database */
int nRes; /* Bytes of reserved space at the end of each page */
int nDb; /* Number of attached databases */
+ const char *zDbMain; /* Schema name of database to vacuum */
if( !db->autoCommit ){
sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
** restored before returning. Then set the writable-schema flag, and
** disable CHECK and foreign key constraints. */
saved_flags = db->flags;
+ saved_mDbFlags = db->mDbFlags;
saved_nChange = db->nChange;
saved_nTotalChange = db->nTotalChange;
- saved_xTrace = db->xTrace;
- db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks | SQLITE_PreferBuiltin;
- db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder);
- db->xTrace = 0;
-
- pMain = db->aDb[0].pBt;
+ saved_mTrace = db->mTrace;
+ db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks;
+ db->mDbFlags |= DBFLAG_PreferBuiltin | DBFLAG_Vacuum;
+ db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder | SQLITE_CountRows);
+ db->mTrace = 0;
+
+ zDbMain = db->aDb[iDb].zDbSName;
+ pMain = db->aDb[iDb].pBt;
isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain));
/* Attach the temporary database as 'vacuum_db'. The synchronous pragma
** to write the journal header file.
*/
nDb = db->nDb;
- if( sqlite3TempInMemory(db) ){
- zSql = "ATTACH ':memory:' AS vacuum_db;";
- }else{
- zSql = "ATTACH '' AS vacuum_db;";
- }
- rc = execSql(db, pzErrMsg, zSql);
- if( db->nDb>nDb ){
- pDb = &db->aDb[db->nDb-1];
- assert( strcmp(pDb->zName,"vacuum_db")==0 );
- }
+ rc = execSql(db, pzErrMsg, "ATTACH''AS vacuum_db");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
- pTemp = db->aDb[db->nDb-1].pBt;
+ assert( (db->nDb-1)==nDb );
+ pDb = &db->aDb[nDb];
+ assert( strcmp(pDb->zDbSName,"vacuum_db")==0 );
+ pTemp = pDb->pBt;
/* The call to execSql() to attach the temp database has left the file
** locked (as there was more than one active statement when the transaction
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
- sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
+ sqlite3CodecGetKey(db, iDb, (void**)&zKey, &nKey);
if( nKey ) db->nextPagesize = 0;
}
#endif
- rc = execSql(db, pzErrMsg, "PRAGMA vacuum_db.synchronous=OFF");
- if( rc!=SQLITE_OK ) goto end_of_vacuum;
+ sqlite3BtreeSetCacheSize(pTemp, db->aDb[iDb].pSchema->cache_size);
+ sqlite3BtreeSetSpillSize(pTemp, sqlite3BtreeSetSpillSize(pMain,0));
+ sqlite3BtreeSetPagerFlags(pTemp, PAGER_SYNCHRONOUS_OFF|PAGER_CACHESPILL);
/* Begin a transaction and take an exclusive lock on the main database
** file. This is done before the sqlite3BtreeGetPageSize(pMain) call below,
** to ensure that we do not try to change the page-size on a WAL database.
*/
- rc = execSql(db, pzErrMsg, "BEGIN;");
+ rc = execSql(db, pzErrMsg, "BEGIN");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeBeginTrans(pMain, 2);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
|| (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes, 0))
|| NEVER(db->mallocFailed)
){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
goto end_of_vacuum;
}
/* Query the schema of the main database. Create a mirror schema
** in the temporary database.
*/
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) "
- " FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'"
- " AND coalesce(rootpage,1)>0"
+ db->init.iDb = nDb; /* force new CREATE statements into vacuum_db */
+ rc = execSqlF(db, pzErrMsg,
+ "SELECT sql FROM \"%w\".sqlite_master"
+ " WHERE type='table'AND name<>'sqlite_sequence'"
+ " AND coalesce(rootpage,1)>0",
+ zDbMain
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14)"
- " FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' ");
- if( rc!=SQLITE_OK ) goto end_of_vacuum;
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21) "
- " FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'");
+ rc = execSqlF(db, pzErrMsg,
+ "SELECT sql FROM \"%w\".sqlite_master"
+ " WHERE type='index' AND length(sql)>10",
+ zDbMain
+ );
if( rc!=SQLITE_OK ) goto end_of_vacuum;
+ db->init.iDb = 0;
/* Loop through the tables in the main database. For each, do
** an "INSERT INTO vacuum_db.xxx SELECT * FROM main.xxx;" to copy
** the contents to the temporary database.
*/
- assert( (db->flags & SQLITE_Vacuum)==0 );
- db->flags |= SQLITE_Vacuum;
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'INSERT INTO vacuum_db.' || quote(name) "
- "|| ' SELECT * FROM main.' || quote(name) || ';'"
- "FROM main.sqlite_master "
- "WHERE type = 'table' AND name!='sqlite_sequence' "
- " AND coalesce(rootpage,1)>0"
- );
- assert( (db->flags & SQLITE_Vacuum)!=0 );
- db->flags &= ~SQLITE_Vacuum;
- if( rc!=SQLITE_OK ) goto end_of_vacuum;
-
- /* Copy over the sequence table
- */
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' "
- "FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' "
- );
- if( rc!=SQLITE_OK ) goto end_of_vacuum;
- rc = execExecSql(db, pzErrMsg,
- "SELECT 'INSERT INTO vacuum_db.' || quote(name) "
- "|| ' SELECT * FROM main.' || quote(name) || ';' "
- "FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';"
+ rc = execSqlF(db, pzErrMsg,
+ "SELECT'INSERT INTO vacuum_db.'||quote(name)"
+ "||' SELECT*FROM\"%w\".'||quote(name)"
+ "FROM vacuum_db.sqlite_master "
+ "WHERE type='table'AND coalesce(rootpage,1)>0",
+ zDbMain
);
+ assert( (db->mDbFlags & DBFLAG_Vacuum)!=0 );
+ db->mDbFlags &= ~DBFLAG_Vacuum;
if( rc!=SQLITE_OK ) goto end_of_vacuum;
-
/* Copy the triggers, views, and virtual tables from the main database
** over to the temporary database. None of these objects has any
** associated storage, so all we have to do is copy their entries
** from the SQLITE_MASTER table.
*/
- rc = execSql(db, pzErrMsg,
- "INSERT INTO vacuum_db.sqlite_master "
- " SELECT type, name, tbl_name, rootpage, sql"
- " FROM main.sqlite_master"
- " WHERE type='view' OR type='trigger'"
- " OR (type='table' AND rootpage=0)"
+ rc = execSqlF(db, pzErrMsg,
+ "INSERT INTO vacuum_db.sqlite_master"
+ " SELECT*FROM \"%w\".sqlite_master"
+ " WHERE type IN('view','trigger')"
+ " OR(type='table'AND rootpage=0)",
+ zDbMain
);
if( rc ) goto end_of_vacuum;
end_of_vacuum:
/* Restore the original value of db->flags */
+ db->init.iDb = 0;
+ db->mDbFlags = saved_mDbFlags;
db->flags = saved_flags;
db->nChange = saved_nChange;
db->nTotalChange = saved_nTotalChange;
- db->xTrace = saved_xTrace;
+ db->mTrace = saved_mTrace;
sqlite3BtreeSetPageSize(pMain, -1, -1, 1);
/* Currently there is an SQL level transaction open on the vacuum
int bDeclared; /* True after sqlite3_declare_vtab() is called */
};
+/*
+** Construct and install a Module object for a virtual table. When this
+** routine is called, it is guaranteed that all appropriate locks are held
+** and the module is not already part of the connection.
+*/
+SQLITE_PRIVATE Module *sqlite3VtabCreateModule(
+ sqlite3 *db, /* Database in which module is registered */
+ const char *zName, /* Name assigned to this module */
+ const sqlite3_module *pModule, /* The definition of the module */
+ void *pAux, /* Context pointer for xCreate/xConnect */
+ void (*xDestroy)(void *) /* Module destructor function */
+){
+ Module *pMod;
+ int nName = sqlite3Strlen30(zName);
+ pMod = (Module *)sqlite3Malloc(sizeof(Module) + nName + 1);
+ if( pMod==0 ){
+ sqlite3OomFault(db);
+ }else{
+ Module *pDel;
+ char *zCopy = (char *)(&pMod[1]);
+ memcpy(zCopy, zName, nName+1);
+ pMod->zName = zCopy;
+ pMod->pModule = pModule;
+ pMod->pAux = pAux;
+ pMod->xDestroy = xDestroy;
+ pMod->pEpoTab = 0;
+ pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod);
+ assert( pDel==0 || pDel==pMod );
+ if( pDel ){
+ sqlite3OomFault(db);
+ sqlite3DbFree(db, pDel);
+ pMod = 0;
+ }
+ }
+ return pMod;
+}
+
/*
** The actual function that does the work of creating a new module.
** This function implements the sqlite3_create_module() and
void (*xDestroy)(void *) /* Module destructor function */
){
int rc = SQLITE_OK;
- int nName;
sqlite3_mutex_enter(db->mutex);
- nName = sqlite3Strlen30(zName);
if( sqlite3HashFind(&db->aModule, zName) ){
rc = SQLITE_MISUSE_BKPT;
}else{
- Module *pMod;
- pMod = (Module *)sqlite3DbMallocRaw(db, sizeof(Module) + nName + 1);
- if( pMod ){
- Module *pDel;
- char *zCopy = (char *)(&pMod[1]);
- memcpy(zCopy, zName, nName+1);
- pMod->zName = zCopy;
- pMod->pModule = pModule;
- pMod->pAux = pAux;
- pMod->xDestroy = xDestroy;
- pMod->pEpoTab = 0;
- pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod);
- assert( pDel==0 || pDel==pMod );
- if( pDel ){
- db->mallocFailed = 1;
- sqlite3DbFree(db, pDel);
- }
- }
+ (void)sqlite3VtabCreateModule(db, zName, pModule, pAux, xDestroy);
}
rc = sqlite3ApiExit(db, rc);
if( rc!=SQLITE_OK && xDestroy ) xDestroy(pAux);
-
sqlite3_mutex_leave(db->mutex);
return rc;
}
/*
** External API function used to create a new virtual-table module.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
sqlite3 *db, /* Database in which module is registered */
const char *zName, /* Name assigned to this module */
const sqlite3_module *pModule, /* The definition of the module */
/*
** External API function used to create a new virtual-table module.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
sqlite3 *db, /* Database in which module is registered */
const char *zName, /* Name assigned to this module */
const sqlite3_module *pModule, /* The definition of the module */
iDb = sqlite3SchemaToIndex(db, pTable->pSchema);
assert( iDb>=0 );
- pTable->tabFlags |= TF_Virtual;
- pTable->nModuleArg = 0;
+ assert( pTable->nModuleArg==0 );
addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName));
addModuleArgument(db, pTable, 0);
addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName));
*/
if( pTable->azModuleArg ){
sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName,
- pTable->azModuleArg[0], pParse->db->aDb[iDb].zName);
+ pTable->azModuleArg[0], pParse->db->aDb[iDb].zDbSName);
}
#endif
}
"UPDATE %Q.%s "
"SET type='table', name=%Q, tbl_name=%Q, rootpage=0, sql=%Q "
"WHERE rowid=#%d",
- db->aDb[iDb].zName, SCHEMA_TABLE(iDb),
+ db->aDb[iDb].zDbSName, MASTER_NAME,
pTab->zName,
pTab->zName,
zStmt,
v = sqlite3GetVdbe(pParse);
sqlite3ChangeCookie(pParse, iDb);
- sqlite3VdbeAddOp2(v, OP_Expire, 0, 0);
+ sqlite3VdbeAddOp0(v, OP_Expire);
zWhere = sqlite3MPrintf(db, "name='%q' AND type='table'", pTab->zName);
sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere);
assert( sqlite3SchemaMutexHeld(db, 0, pSchema) );
pOld = sqlite3HashInsert(&pSchema->tblHash, zName, pTab);
if( pOld ){
- db->mallocFailed = 1;
+ sqlite3OomFault(db);
assert( pTab==pOld ); /* Malloc must have failed inside HashInsert() */
return;
}
}
}
- zModuleName = sqlite3MPrintf(db, "%s", pTab->zName);
+ zModuleName = sqlite3DbStrDup(db, pTab->zName);
if( !zModuleName ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
- pVTable = sqlite3DbMallocZero(db, sizeof(VTable));
+ pVTable = sqlite3MallocZero(sizeof(VTable));
if( !pVTable ){
+ sqlite3OomFault(db);
sqlite3DbFree(db, zModuleName);
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
pVTable->db = db;
pVTable->pMod = pMod;
iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
- pTab->azModuleArg[1] = db->aDb[iDb].zName;
+ pTab->azModuleArg[1] = db->aDb[iDb].zDbSName;
/* Invoke the virtual table constructor */
assert( &db->pVtabCtx );
db->pVtabCtx = &sCtx;
rc = xConstruct(db, pMod->pAux, nArg, azArg, &pVTable->pVtab, &zErr);
db->pVtabCtx = sCtx.pPrior;
- if( rc==SQLITE_NOMEM ) db->mallocFailed = 1;
+ if( rc==SQLITE_NOMEM ) sqlite3OomFault(db);
assert( sCtx.pTab==pTab );
if( SQLITE_OK!=rc ){
pTab->pVTable = pVTable;
for(iCol=0; iCol<pTab->nCol; iCol++){
- char *zType = pTab->aCol[iCol].zType;
+ char *zType = sqlite3ColumnType(&pTab->aCol[iCol], "");
int nType;
int i = 0;
- if( !zType ){
- pTab->tabFlags |= oooHidden;
- continue;
- }
nType = sqlite3Strlen30(zType);
- if( sqlite3StrNICmp("hidden", zType, 6)||(zType[6] && zType[6]!=' ') ){
- for(i=0; i<nType; i++){
- if( (0==sqlite3StrNICmp(" hidden", &zType[i], 7))
- && (zType[i+7]=='\0' || zType[i+7]==' ')
- ){
- i++;
- break;
- }
+ for(i=0; i<nType; i++){
+ if( 0==sqlite3StrNICmp("hidden", &zType[i], 6)
+ && (i==0 || zType[i-1]==' ')
+ && (zType[i+6]=='\0' || zType[i+6]==' ')
+ ){
+ break;
}
}
if( i<nType ){
int rc;
assert( pTab );
- if( (pTab->tabFlags & TF_Virtual)==0 || sqlite3GetVTable(db, pTab) ){
+ if( !IsVirtual(pTab) || sqlite3GetVTable(db, pTab) ){
return SQLITE_OK;
}
rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xConnect, &zErr);
if( rc!=SQLITE_OK ){
sqlite3ErrorMsg(pParse, "%s", zErr);
+ pParse->rc = rc;
}
sqlite3DbFree(db, zErr);
}
int nBytes = sizeof(sqlite3_vtab *) * (db->nVTrans + ARRAY_INCR);
aVTrans = sqlite3DbRealloc(db, (void *)db->aVTrans, nBytes);
if( !aVTrans ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memset(&aVTrans[db->nVTrans], 0, sizeof(sqlite3_vtab *)*ARRAY_INCR);
db->aVTrans = aVTrans;
** This function is invoked by the vdbe to call the xCreate method
** of the virtual table named zTab in database iDb.
**
-** If an error occurs, *pzErr is set to point an an English language
+** If an error occurs, *pzErr is set to point to an English language
** description of the error and an SQLITE_XXX error code is returned.
** In this case the caller must call sqlite3DbFree(db, ) on *pzErr.
*/
Module *pMod;
const char *zMod;
- pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName);
- assert( pTab && (pTab->tabFlags & TF_Virtual)!=0 && !pTab->pVTable );
+ pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zDbSName);
+ assert( pTab && IsVirtual(pTab) && !pTab->pVTable );
/* Locate the required virtual table module */
zMod = pTab->azModuleArg[0];
** valid to call this function from within the xCreate() or xConnect() of a
** virtual table module.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){
+SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){
VtabCtx *pCtx;
- Parse *pParse;
int rc = SQLITE_OK;
Table *pTab;
char *zErr = 0;
+ Parse sParse;
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) || zCreateTable==0 ){
return SQLITE_MISUSE_BKPT;
}
pTab = pCtx->pTab;
- assert( (pTab->tabFlags & TF_Virtual)!=0 );
+ assert( IsVirtual(pTab) );
- pParse = sqlite3StackAllocZero(db, sizeof(*pParse));
- if( pParse==0 ){
- rc = SQLITE_NOMEM;
- }else{
- pParse->declareVtab = 1;
- pParse->db = db;
- pParse->nQueryLoop = 1;
-
- if( SQLITE_OK==sqlite3RunParser(pParse, zCreateTable, &zErr)
- && pParse->pNewTable
- && !db->mallocFailed
- && !pParse->pNewTable->pSelect
- && (pParse->pNewTable->tabFlags & TF_Virtual)==0
- ){
- if( !pTab->aCol ){
- pTab->aCol = pParse->pNewTable->aCol;
- pTab->nCol = pParse->pNewTable->nCol;
- pParse->pNewTable->nCol = 0;
- pParse->pNewTable->aCol = 0;
+ memset(&sParse, 0, sizeof(sParse));
+ sParse.declareVtab = 1;
+ sParse.db = db;
+ sParse.nQueryLoop = 1;
+ if( SQLITE_OK==sqlite3RunParser(&sParse, zCreateTable, &zErr)
+ && sParse.pNewTable
+ && !db->mallocFailed
+ && !sParse.pNewTable->pSelect
+ && !IsVirtual(sParse.pNewTable)
+ ){
+ if( !pTab->aCol ){
+ Table *pNew = sParse.pNewTable;
+ Index *pIdx;
+ pTab->aCol = pNew->aCol;
+ pTab->nCol = pNew->nCol;
+ pTab->tabFlags |= pNew->tabFlags & (TF_WithoutRowid|TF_NoVisibleRowid);
+ pNew->nCol = 0;
+ pNew->aCol = 0;
+ assert( pTab->pIndex==0 );
+ assert( HasRowid(pNew) || sqlite3PrimaryKeyIndex(pNew)!=0 );
+ if( !HasRowid(pNew)
+ && pCtx->pVTable->pMod->pModule->xUpdate!=0
+ && sqlite3PrimaryKeyIndex(pNew)->nKeyCol!=1
+ ){
+ /* WITHOUT ROWID virtual tables must either be read-only (xUpdate==0)
+ ** or else must have a single-column PRIMARY KEY */
+ rc = SQLITE_ERROR;
+ }
+ pIdx = pNew->pIndex;
+ if( pIdx ){
+ assert( pIdx->pNext==0 );
+ pTab->pIndex = pIdx;
+ pNew->pIndex = 0;
+ pIdx->pTable = pTab;
}
- pCtx->bDeclared = 1;
- }else{
- sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr);
- sqlite3DbFree(db, zErr);
- rc = SQLITE_ERROR;
- }
- pParse->declareVtab = 0;
-
- if( pParse->pVdbe ){
- sqlite3VdbeFinalize(pParse->pVdbe);
}
- sqlite3DeleteTable(db, pParse->pNewTable);
- sqlite3ParserReset(pParse);
- sqlite3StackFree(db, pParse);
+ pCtx->bDeclared = 1;
+ }else{
+ sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr);
+ sqlite3DbFree(db, zErr);
+ rc = SQLITE_ERROR;
+ }
+ sParse.declareVtab = 0;
+
+ if( sParse.pVdbe ){
+ sqlite3VdbeFinalize(sParse.pVdbe);
}
+ sqlite3DeleteTable(db, sParse.pNewTable);
+ sqlite3ParserReset(&sParse);
assert( (rc&0xff)==rc );
rc = sqlite3ApiExit(db, rc);
int rc = SQLITE_OK;
Table *pTab;
- pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zName);
- if( ALWAYS(pTab!=0 && pTab->pVTable!=0) ){
+ pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zDbSName);
+ if( pTab!=0 && ALWAYS(pTab->pVTable!=0) ){
VTable *p;
int (*xDestroy)(sqlite3_vtab *);
for(p=pTab->pVTable; p; p=p->pNext){
if( rc==SQLITE_OK ){
int iSvpt = db->nStatement + db->nSavepoint;
addToVTrans(db, pVTab);
- if( iSvpt ) rc = sqlite3VtabSavepoint(db, SAVEPOINT_BEGIN, iSvpt-1);
+ if( iSvpt && pModule->xSavepoint ){
+ pVTab->iSavepoint = iSvpt;
+ rc = pModule->xSavepoint(pVTab->pVtab, iSvpt-1);
+ }
}
}
}
Table *pTab;
sqlite3_vtab *pVtab;
sqlite3_module *pMod;
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**) = 0;
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value**) = 0;
void *pArg = 0;
FuncDef *pNew;
int rc = 0;
if( NEVER(pExpr==0) ) return pDef;
if( pExpr->op!=TK_COLUMN ) return pDef;
pTab = pExpr->pTab;
- if( NEVER(pTab==0) ) return pDef;
- if( (pTab->tabFlags & TF_Virtual)==0 ) return pDef;
+ if( pTab==0 ) return pDef;
+ if( !IsVirtual(pTab) ) return pDef;
pVtab = sqlite3GetVTable(db, pTab)->pVtab;
assert( pVtab!=0 );
assert( pVtab->pModule!=0 );
for(z=(unsigned char*)zLowerName; *z; z++){
*z = sqlite3UpperToLower[*z];
}
- rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xFunc, &pArg);
+ rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xSFunc, &pArg);
sqlite3DbFree(db, zLowerName);
}
if( rc==0 ){
return pDef;
}
*pNew = *pDef;
- pNew->zName = (char *)&pNew[1];
- memcpy(pNew->zName, pDef->zName, sqlite3Strlen30(pDef->zName)+1);
- pNew->xFunc = xFunc;
+ pNew->zName = (const char*)&pNew[1];
+ memcpy((char*)&pNew[1], pDef->zName, sqlite3Strlen30(pDef->zName)+1);
+ pNew->xSFunc = xSFunc;
pNew->pUserData = pArg;
pNew->funcFlags |= SQLITE_FUNC_EPHEM;
return pNew;
pToplevel->apVtabLock = apVtabLock;
pToplevel->apVtabLock[pToplevel->nVtabLock++] = pTab;
}else{
- pToplevel->db->mallocFailed = 1;
+ sqlite3OomFault(pToplevel->db);
}
}
/*
-** Check to see if virtual tale module pMod can be have an eponymous
+** Check to see if virtual table module pMod can be have an eponymous
** virtual table instance. If it can, create one if one does not already
** exist. Return non-zero if the eponymous virtual table instance exists
** when this routine returns, and return zero if it does not exist.
const sqlite3_module *pModule = pMod->pModule;
Table *pTab;
char *zErr = 0;
- int nName;
int rc;
sqlite3 *db = pParse->db;
if( pMod->pEpoTab ) return 1;
if( pModule->xCreate!=0 && pModule->xCreate!=pModule->xConnect ) return 0;
- nName = sqlite3Strlen30(pMod->zName) + 1;
- pTab = sqlite3DbMallocZero(db, sizeof(Table) + nName);
+ pTab = sqlite3DbMallocZero(db, sizeof(Table));
if( pTab==0 ) return 0;
+ pTab->zName = sqlite3DbStrDup(db, pMod->zName);
+ if( pTab->zName==0 ){
+ sqlite3DbFree(db, pTab);
+ return 0;
+ }
pMod->pEpoTab = pTab;
- pTab->zName = (char*)&pTab[1];
- memcpy(pTab->zName, pMod->zName, nName);
- pTab->nRef = 1;
+ pTab->nTabRef = 1;
pTab->pSchema = db->aDb[0].pSchema;
- pTab->tabFlags |= TF_Virtual;
- pTab->nModuleArg = 0;
+ assert( pTab->nModuleArg==0 );
pTab->iPKey = -1;
addModuleArgument(db, pTab, sqlite3DbStrDup(db, pTab->zName));
addModuleArgument(db, pTab, 0);
SQLITE_PRIVATE void sqlite3VtabEponymousTableClear(sqlite3 *db, Module *pMod){
Table *pTab = pMod->pEpoTab;
if( pTab!=0 ){
- sqlite3DeleteColumnNames(db, pTab);
- sqlite3VtabClear(db, pTab);
- sqlite3DbFree(db, pTab);
+ /* Mark the table as Ephemeral prior to deleting it, so that the
+ ** sqlite3DeleteTable() routine will know that it is not stored in
+ ** the schema. */
+ pTab->tabFlags |= TF_Ephemeral;
+ sqlite3DeleteTable(db, pTab);
pMod->pEpoTab = 0;
}
}
** The results of this routine are undefined unless it is called from
** within an xUpdate method.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *db){
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *db){
static const unsigned char aMap[] = {
SQLITE_ROLLBACK, SQLITE_ABORT, SQLITE_FAIL, SQLITE_IGNORE, SQLITE_REPLACE
};
** the SQLite core with additional information about the behavior
** of the virtual table being implemented.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3 *db, int op, ...){
+SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){
va_list ap;
int rc = SQLITE_OK;
if( !p ){
rc = SQLITE_MISUSE_BKPT;
}else{
- assert( p->pTab==0 || (p->pTab->tabFlags & TF_Virtual)!=0 );
+ assert( p->pTab==0 || IsVirtual(p->pTab) );
p->pVTable->bConstraint = (u8)va_arg(ap, int);
}
break;
int addrCont; /* Jump here to continue with the next loop cycle */
int addrFirst; /* First instruction of interior of the loop */
int addrBody; /* Beginning of the body of this loop */
- int iLikeRepCntr; /* LIKE range processing counter register */
+#ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
+ u32 iLikeRepCntr; /* LIKE range processing counter register (times 2) */
int addrLikeRep; /* LIKE range processing address */
+#endif
u8 iFrom; /* Which entry in the FROM clause */
u8 op, p3, p5; /* Opcode, P3 & P5 of the opcode that ends the loop */
int p1, p2; /* Operands of the opcode used to ends the loop */
union {
struct { /* Information for internal btree tables */
u16 nEq; /* Number of equality constraints */
+ u16 nBtm; /* Size of BTM vector */
+ u16 nTop; /* Size of TOP vector */
+ u16 nIdxCol; /* Index column used for ORDER BY */
Index *pIndex; /* Index used, or NULL */
} btree;
struct { /* Information for virtual tables */
*/
struct WhereTerm {
Expr *pExpr; /* Pointer to the subexpression that is this term */
+ WhereClause *pWC; /* The clause this term is part of */
+ LogEst truthProb; /* Probability of truth for this expression */
+ u16 wtFlags; /* TERM_xxx bit flags. See below */
+ u16 eOperator; /* A WO_xx value describing <op> */
+ u8 nChild; /* Number of children that must disable us */
+ u8 eMatchOp; /* Op for vtab MATCH/LIKE/GLOB/REGEXP terms */
int iParent; /* Disable pWC->a[iParent] when this term disabled */
int leftCursor; /* Cursor number of X in "X <op> <expr>" */
+ int iField; /* Field in (?,?,?) IN (SELECT...) vector */
union {
int leftColumn; /* Column number of X in "X <op> <expr>" */
WhereOrInfo *pOrInfo; /* Extra information if (eOperator & WO_OR)!=0 */
WhereAndInfo *pAndInfo; /* Extra information if (eOperator& WO_AND)!=0 */
} u;
- LogEst truthProb; /* Probability of truth for this expression */
- u16 eOperator; /* A WO_xx value describing <op> */
- u16 wtFlags; /* TERM_xxx bit flags. See below */
- u8 nChild; /* Number of children that must disable us */
- WhereClause *pWC; /* The clause this term is part of */
Bitmask prereqRight; /* Bitmask of tables used by pExpr->pRight */
Bitmask prereqAll; /* Bitmask of tables referenced by pExpr */
};
#define TERM_LIKECOND 0x200 /* Conditionally this LIKE operator term */
#define TERM_LIKE 0x400 /* The original LIKE operator */
#define TERM_IS 0x800 /* Term.pExpr is an IS operator */
+#define TERM_VARSELECT 0x1000 /* Term.pExpr contains a correlated sub-query */
/*
** An instance of the WhereScan object is used as an iterator for locating
struct WhereScan {
WhereClause *pOrigWC; /* Original, innermost WhereClause */
WhereClause *pWC; /* WhereClause currently being scanned */
- char *zCollName; /* Required collating sequence, if not NULL */
+ const char *zCollName; /* Required collating sequence, if not NULL */
Expr *pIdxExpr; /* Search for this index expression */
char idxaff; /* Must match this affinity, if zCollName!=NULL */
unsigned char nEquiv; /* Number of entries in aEquiv[] */
** no gaps.
*/
struct WhereMaskSet {
+ int bVarSelect; /* Used by sqlite3WhereExprUsage() */
int n; /* Number of assigned cursor values */
int ix[BMS]; /* Cursor assigned to each bit */
};
UnpackedRecord *pRec; /* Probe for stat4 (if required) */
int nRecValid; /* Number of valid fields currently in pRec */
#endif
+ unsigned int bldFlags; /* SQLITE_BLDF_* flags */
};
+/* Allowed values for WhereLoopBuider.bldFlags */
+#define SQLITE_BLDF_INDEXED 0x0001 /* An index is used */
+#define SQLITE_BLDF_UNIQUE 0x0002 /* All keys of a UNIQUE index used */
+
/*
** The WHERE clause processing routine has two halves. The
** first part does the start of the WHERE loop and the second
Parse *pParse; /* Parsing and code generating context */
SrcList *pTabList; /* List of tables in the join */
ExprList *pOrderBy; /* The ORDER BY clause or NULL */
- ExprList *pResultSet; /* Result set. DISTINCT operates on these */
- WhereLoop *pLoops; /* List of all WhereLoop objects */
- Bitmask revMask; /* Mask of ORDER BY terms that need reversing */
- LogEst nRowOut; /* Estimated number of output rows */
+ ExprList *pResultSet; /* Result set of the query */
+ Expr *pWhere; /* The complete WHERE clause */
+ LogEst iLimit; /* LIMIT if wctrlFlags has WHERE_USE_LIMIT */
+ int aiCurOnePass[2]; /* OP_OpenWrite cursors for the ONEPASS opt */
+ int iContinue; /* Jump here to continue with next record */
+ int iBreak; /* Jump here to break out of the loop */
+ int savedNQueryLoop; /* pParse->nQueryLoop outside the WHERE loop */
u16 wctrlFlags; /* Flags originally passed to sqlite3WhereBegin() */
+ u8 nLevel; /* Number of nested loop */
i8 nOBSat; /* Number of ORDER BY terms satisfied by indices */
u8 sorted; /* True if really sorted (not just grouped) */
u8 eOnePass; /* ONEPASS_OFF, or _SINGLE, or _MULTI */
u8 untestedTerms; /* Not all WHERE terms resolved by outer loop */
- u8 eDistinct; /* One of the WHERE_DISTINCT_* values below */
- u8 nLevel; /* Number of nested loop */
+ u8 eDistinct; /* One of the WHERE_DISTINCT_* values */
+ u8 bOrderedInnerLoop; /* True if only the inner-most loop is ordered */
int iTop; /* The very beginning of the WHERE loop */
- int iContinue; /* Jump here to continue with next record */
- int iBreak; /* Jump here to break out of the loop */
- int savedNQueryLoop; /* pParse->nQueryLoop outside the WHERE loop */
- int aiCurOnePass[2]; /* OP_OpenWrite cursors for the ONEPASS opt */
- WhereMaskSet sMaskSet; /* Map cursor numbers to bitmasks */
+ WhereLoop *pLoops; /* List of all WhereLoop objects */
+ Bitmask revMask; /* Mask of ORDER BY terms that need reversing */
+ LogEst nRowOut; /* Estimated number of output rows */
WhereClause sWC; /* Decomposition of the WHERE clause */
+ WhereMaskSet sMaskSet; /* Map cursor numbers to bitmasks */
WhereLevel a[1]; /* Information about each nest loop in WHERE */
};
** where.c:
*/
SQLITE_PRIVATE Bitmask sqlite3WhereGetMask(WhereMaskSet*,int);
+#ifdef WHERETRACE_ENABLED
+SQLITE_PRIVATE void sqlite3WhereClausePrint(WhereClause *pWC);
+#endif
SQLITE_PRIVATE WhereTerm *sqlite3WhereFindTerm(
WhereClause *pWC, /* The WHERE clause to be searched */
int iCur, /* Cursor number of LHS */
** operators that are of interest to the query planner. An
** OR-ed combination of these values can be used when searching for
** particular WhereTerms within a WhereClause.
+**
+** Value constraints:
+** WO_EQ == SQLITE_INDEX_CONSTRAINT_EQ
+** WO_LT == SQLITE_INDEX_CONSTRAINT_LT
+** WO_LE == SQLITE_INDEX_CONSTRAINT_LE
+** WO_GT == SQLITE_INDEX_CONSTRAINT_GT
+** WO_GE == SQLITE_INDEX_CONSTRAINT_GE
*/
#define WO_IN 0x0001
#define WO_EQ 0x0002
#define WO_LE (WO_EQ<<(TK_LE-TK_EQ))
#define WO_GT (WO_EQ<<(TK_GT-TK_EQ))
#define WO_GE (WO_EQ<<(TK_GE-TK_EQ))
-#define WO_MATCH 0x0040
+#define WO_AUX 0x0040 /* Op useful to virtual tables only */
#define WO_IS 0x0080
#define WO_ISNULL 0x0100
#define WO_OR 0x0200 /* Two or more OR-connected terms */
/************** Continuing where we left off in wherecode.c ******************/
#ifndef SQLITE_OMIT_EXPLAIN
+
+/*
+** Return the name of the i-th column of the pIdx index.
+*/
+static const char *explainIndexColumnName(Index *pIdx, int i){
+ i = pIdx->aiColumn[i];
+ if( i==XN_EXPR ) return "<expr>";
+ if( i==XN_ROWID ) return "rowid";
+ return pIdx->pTable->aCol[i].zName;
+}
+
/*
** This routine is a helper for explainIndexRange() below
**
*/
static void explainAppendTerm(
StrAccum *pStr, /* The text expression being built */
- int iTerm, /* Index of this term. First is zero */
- const char *zColumn, /* Name of the column */
+ Index *pIdx, /* Index to read column names from */
+ int nTerm, /* Number of terms */
+ int iTerm, /* Zero-based index of first term. */
+ int bAnd, /* Non-zero to append " AND " */
const char *zOp /* Name of the operator */
){
- if( iTerm ) sqlite3StrAccumAppend(pStr, " AND ", 5);
- sqlite3StrAccumAppendAll(pStr, zColumn);
+ int i;
+
+ assert( nTerm>=1 );
+ if( bAnd ) sqlite3StrAccumAppend(pStr, " AND ", 5);
+
+ if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1);
+ for(i=0; i<nTerm; i++){
+ if( i ) sqlite3StrAccumAppend(pStr, ",", 1);
+ sqlite3StrAccumAppendAll(pStr, explainIndexColumnName(pIdx, iTerm+i));
+ }
+ if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1);
+
sqlite3StrAccumAppend(pStr, zOp, 1);
- sqlite3StrAccumAppend(pStr, "?", 1);
-}
-/*
-** Return the name of the i-th column of the pIdx index.
-*/
-static const char *explainIndexColumnName(Index *pIdx, int i){
- i = pIdx->aiColumn[i];
- if( i==XN_EXPR ) return "<expr>";
- if( i==XN_ROWID ) return "rowid";
- return pIdx->pTable->aCol[i].zName;
+ if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1);
+ for(i=0; i<nTerm; i++){
+ if( i ) sqlite3StrAccumAppend(pStr, ",", 1);
+ sqlite3StrAccumAppend(pStr, "?", 1);
+ }
+ if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1);
}
/*
for(i=0; i<nEq; i++){
const char *z = explainIndexColumnName(pIndex, i);
if( i ) sqlite3StrAccumAppend(pStr, " AND ", 5);
- sqlite3XPrintf(pStr, 0, i>=nSkip ? "%s=?" : "ANY(%s)", z);
+ sqlite3XPrintf(pStr, i>=nSkip ? "%s=?" : "ANY(%s)", z);
}
j = i;
if( pLoop->wsFlags&WHERE_BTM_LIMIT ){
- const char *z = explainIndexColumnName(pIndex, i);
- explainAppendTerm(pStr, i++, z, ">");
+ explainAppendTerm(pStr, pIndex, pLoop->u.btree.nBtm, j, i, ">");
+ i = 1;
}
if( pLoop->wsFlags&WHERE_TOP_LIMIT ){
- const char *z = explainIndexColumnName(pIndex, j);
- explainAppendTerm(pStr, i, z, "<");
+ explainAppendTerm(pStr, pIndex, pLoop->u.btree.nTop, j, i, "<");
}
sqlite3StrAccumAppend(pStr, ")", 1);
}
){
int ret = 0;
#if !defined(SQLITE_DEBUG) && !defined(SQLITE_ENABLE_STMT_SCANSTATUS)
- if( pParse->explain==2 )
+ if( sqlite3ParseToplevel(pParse)->explain==2 )
#endif
{
struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom];
pLoop = pLevel->pWLoop;
flags = pLoop->wsFlags;
- if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_ONETABLE_ONLY) ) return 0;
+ if( (flags&WHERE_MULTI_OR) || (wctrlFlags&WHERE_OR_SUBCLAUSE) ) return 0;
isSearch = (flags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))!=0
|| ((flags&WHERE_VIRTUALTABLE)==0 && (pLoop->u.btree.nEq>0))
sqlite3StrAccumInit(&str, db, zBuf, sizeof(zBuf), SQLITE_MAX_LENGTH);
sqlite3StrAccumAppendAll(&str, isSearch ? "SEARCH" : "SCAN");
if( pItem->pSelect ){
- sqlite3XPrintf(&str, 0, " SUBQUERY %d", pItem->iSelectId);
+ sqlite3XPrintf(&str, " SUBQUERY %d", pItem->iSelectId);
}else{
- sqlite3XPrintf(&str, 0, " TABLE %s", pItem->zName);
+ sqlite3XPrintf(&str, " TABLE %s", pItem->zName);
}
if( pItem->zAlias ){
- sqlite3XPrintf(&str, 0, " AS %s", pItem->zAlias);
+ sqlite3XPrintf(&str, " AS %s", pItem->zAlias);
}
if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){
const char *zFmt = 0;
}
if( zFmt ){
sqlite3StrAccumAppend(&str, " USING ", 7);
- sqlite3XPrintf(&str, 0, zFmt, pIdx->zName);
+ sqlite3XPrintf(&str, zFmt, pIdx->zName);
explainIndexRange(&str, pLoop);
}
}else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){
assert( flags&WHERE_TOP_LIMIT);
zRangeOp = "<";
}
- sqlite3XPrintf(&str, 0, " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp);
+ sqlite3XPrintf(&str, " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp);
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
else if( (flags & WHERE_VIRTUALTABLE)!=0 ){
- sqlite3XPrintf(&str, 0, " VIRTUAL TABLE INDEX %d:%s",
+ sqlite3XPrintf(&str, " VIRTUAL TABLE INDEX %d:%s",
pLoop->u.vtab.idxNum, pLoop->u.vtab.idxStr);
}
#endif
#ifdef SQLITE_EXPLAIN_ESTIMATED_ROWS
if( pLoop->nOut>=10 ){
- sqlite3XPrintf(&str, 0, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut));
+ sqlite3XPrintf(&str, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut));
}else{
sqlite3StrAccumAppend(&str, " (~1 row)", 9);
}
*/
static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){
int nLoop = 0;
- while( pTerm
- && (pTerm->wtFlags & TERM_CODED)==0
+ assert( pTerm!=0 );
+ while( (pTerm->wtFlags & TERM_CODED)==0
&& (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin))
&& (pLevel->notReady & pTerm->prereqAll)==0
){
}
if( pTerm->iParent<0 ) break;
pTerm = &pTerm->pWC->a[pTerm->iParent];
+ assert( pTerm!=0 );
pTerm->nChild--;
if( pTerm->nChild!=0 ) break;
nLoop++;
/* Code the OP_Affinity opcode if there is anything left to do. */
if( n>0 ){
- sqlite3VdbeAddOp2(v, OP_Affinity, base, n);
- sqlite3VdbeChangeP4(v, -1, zAff, n);
+ sqlite3VdbeAddOp4(v, OP_Affinity, base, n, 0, zAff, n);
sqlite3ExprCacheAffinityChange(pParse, base, n);
}
}
+/*
+** Expression pRight, which is the RHS of a comparison operation, is
+** either a vector of n elements or, if n==1, a scalar expression.
+** Before the comparison operation, affinity zAff is to be applied
+** to the pRight values. This function modifies characters within the
+** affinity string to SQLITE_AFF_BLOB if either:
+**
+** * the comparison will be performed with no affinity, or
+** * the affinity change in zAff is guaranteed not to change the value.
+*/
+static void updateRangeAffinityStr(
+ Expr *pRight, /* RHS of comparison */
+ int n, /* Number of vector elements in comparison */
+ char *zAff /* Affinity string to modify */
+){
+ int i;
+ for(i=0; i<n; i++){
+ Expr *p = sqlite3VectorFieldSubexpr(pRight, i);
+ if( sqlite3CompareAffinity(p, zAff[i])==SQLITE_AFF_BLOB
+ || sqlite3ExprNeedsNoAffinityChange(p, zAff[i])
+ ){
+ zAff[i] = SQLITE_AFF_BLOB;
+ }
+ }
+}
+
+
+/*
+** pX is an expression of the form: (vector) IN (SELECT ...)
+** In other words, it is a vector IN operator with a SELECT clause on the
+** LHS. But not all terms in the vector are indexable and the terms might
+** not be in the correct order for indexing.
+**
+** This routine makes a copy of the input pX expression and then adjusts
+** the vector on the LHS with corresponding changes to the SELECT so that
+** the vector contains only index terms and those terms are in the correct
+** order. The modified IN expression is returned. The caller is responsible
+** for deleting the returned expression.
+**
+** Example:
+**
+** CREATE TABLE t1(a,b,c,d,e,f);
+** CREATE INDEX t1x1 ON t1(e,c);
+** SELECT * FROM t1 WHERE (a,b,c,d,e) IN (SELECT v,w,x,y,z FROM t2)
+** \_______________________________________/
+** The pX expression
+**
+** Since only columns e and c can be used with the index, in that order,
+** the modified IN expression that is returned will be:
+**
+** (e,c) IN (SELECT z,x FROM t2)
+**
+** The reduced pX is different from the original (obviously) and thus is
+** only used for indexing, to improve performance. The original unaltered
+** IN expression must also be run on each output row for correctness.
+*/
+static Expr *removeUnindexableInClauseTerms(
+ Parse *pParse, /* The parsing context */
+ int iEq, /* Look at loop terms starting here */
+ WhereLoop *pLoop, /* The current loop */
+ Expr *pX /* The IN expression to be reduced */
+){
+ sqlite3 *db = pParse->db;
+ Expr *pNew = sqlite3ExprDup(db, pX, 0);
+ if( db->mallocFailed==0 ){
+ ExprList *pOrigRhs = pNew->x.pSelect->pEList; /* Original unmodified RHS */
+ ExprList *pOrigLhs = pNew->pLeft->x.pList; /* Original unmodified LHS */
+ ExprList *pRhs = 0; /* New RHS after modifications */
+ ExprList *pLhs = 0; /* New LHS after mods */
+ int i; /* Loop counter */
+ Select *pSelect; /* Pointer to the SELECT on the RHS */
+
+ for(i=iEq; i<pLoop->nLTerm; i++){
+ if( pLoop->aLTerm[i]->pExpr==pX ){
+ int iField = pLoop->aLTerm[i]->iField - 1;
+ assert( pOrigRhs->a[iField].pExpr!=0 );
+ pRhs = sqlite3ExprListAppend(pParse, pRhs, pOrigRhs->a[iField].pExpr);
+ pOrigRhs->a[iField].pExpr = 0;
+ assert( pOrigLhs->a[iField].pExpr!=0 );
+ pLhs = sqlite3ExprListAppend(pParse, pLhs, pOrigLhs->a[iField].pExpr);
+ pOrigLhs->a[iField].pExpr = 0;
+ }
+ }
+ sqlite3ExprListDelete(db, pOrigRhs);
+ sqlite3ExprListDelete(db, pOrigLhs);
+ pNew->pLeft->x.pList = pLhs;
+ pNew->x.pSelect->pEList = pRhs;
+ if( pLhs && pLhs->nExpr==1 ){
+ /* Take care here not to generate a TK_VECTOR containing only a
+ ** single value. Since the parser never creates such a vector, some
+ ** of the subroutines do not handle this case. */
+ Expr *p = pLhs->a[0].pExpr;
+ pLhs->a[0].pExpr = 0;
+ sqlite3ExprDelete(db, pNew->pLeft);
+ pNew->pLeft = p;
+ }
+ pSelect = pNew->x.pSelect;
+ if( pSelect->pOrderBy ){
+ /* If the SELECT statement has an ORDER BY clause, zero the
+ ** iOrderByCol variables. These are set to non-zero when an
+ ** ORDER BY term exactly matches one of the terms of the
+ ** result-set. Since the result-set of the SELECT statement may
+ ** have been modified or reordered, these variables are no longer
+ ** set correctly. Since setting them is just an optimization,
+ ** it's easiest just to zero them here. */
+ ExprList *pOrderBy = pSelect->pOrderBy;
+ for(i=0; i<pOrderBy->nExpr; i++){
+ pOrderBy->a[i].u.x.iOrderByCol = 0;
+ }
+ }
+
+#if 0
+ printf("For indexing, change the IN expr:\n");
+ sqlite3TreeViewExpr(0, pX, 0);
+ printf("Into:\n");
+ sqlite3TreeViewExpr(0, pNew, 0);
+#endif
+ }
+ return pNew;
+}
+
/*
** Generate code for a single equality term of the WHERE clause. An equality
** term can be either X=expr or X IN (...). pTerm is the term to be
** coded.
**
-** The current value for the constraint is left in register iReg.
+** The current value for the constraint is left in a register, the index
+** of which is returned. An attempt is made store the result in iTarget but
+** this is only guaranteed for TK_ISNULL and TK_IN constraints. If the
+** constraint is a TK_EQ or TK_IS, then the current value might be left in
+** some other register and it is the caller's responsibility to compensate.
**
-** For a constraint of the form X=expr, the expression is evaluated and its
-** result is left on the stack. For constraints of the form X IN (...)
+** For a constraint of the form X=expr, the expression is evaluated in
+** straight-line code. For constraints of the form X IN (...)
** this routine sets up a loop that will iterate over all values of X.
*/
static int codeEqualityTerm(
Vdbe *v = pParse->pVdbe;
int iReg; /* Register holding results */
+ assert( pLevel->pWLoop->aLTerm[iEq]==pTerm );
assert( iTarget>0 );
if( pX->op==TK_EQ || pX->op==TK_IS ){
iReg = sqlite3ExprCodeTarget(pParse, pX->pRight, iTarget);
sqlite3VdbeAddOp2(v, OP_Null, 0, iReg);
#ifndef SQLITE_OMIT_SUBQUERY
}else{
- int eType;
+ int eType = IN_INDEX_NOOP;
int iTab;
struct InLoop *pIn;
WhereLoop *pLoop = pLevel->pWLoop;
+ int i;
+ int nEq = 0;
+ int *aiMap = 0;
if( (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0
&& pLoop->u.btree.pIndex!=0
}
assert( pX->op==TK_IN );
iReg = iTarget;
- eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0);
+
+ for(i=0; i<iEq; i++){
+ if( pLoop->aLTerm[i] && pLoop->aLTerm[i]->pExpr==pX ){
+ disableTerm(pLevel, pTerm);
+ return iTarget;
+ }
+ }
+ for(i=iEq;i<pLoop->nLTerm; i++){
+ assert( pLoop->aLTerm[i]!=0 );
+ if( pLoop->aLTerm[i]->pExpr==pX ) nEq++;
+ }
+
+ if( (pX->flags & EP_xIsSelect)==0 || pX->x.pSelect->pEList->nExpr==1 ){
+ eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, 0);
+ }else{
+ sqlite3 *db = pParse->db;
+ pX = removeUnindexableInClauseTerms(pParse, iEq, pLoop, pX);
+
+ if( !db->mallocFailed ){
+ aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int)*nEq);
+ eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, aiMap);
+ pTerm->pExpr->iTable = pX->iTable;
+ }
+ sqlite3ExprDelete(db, pX);
+ pX = pTerm->pExpr;
+ }
+
if( eType==IN_INDEX_INDEX_DESC ){
testcase( bRev );
bRev = !bRev;
VdbeCoverageIf(v, bRev);
VdbeCoverageIf(v, !bRev);
assert( (pLoop->wsFlags & WHERE_MULTI_OR)==0 );
+
pLoop->wsFlags |= WHERE_IN_ABLE;
if( pLevel->u.in.nIn==0 ){
pLevel->addrNxt = sqlite3VdbeMakeLabel(v);
}
- pLevel->u.in.nIn++;
+
+ i = pLevel->u.in.nIn;
+ pLevel->u.in.nIn += nEq;
pLevel->u.in.aInLoop =
sqlite3DbReallocOrFree(pParse->db, pLevel->u.in.aInLoop,
sizeof(pLevel->u.in.aInLoop[0])*pLevel->u.in.nIn);
pIn = pLevel->u.in.aInLoop;
if( pIn ){
- pIn += pLevel->u.in.nIn - 1;
- pIn->iCur = iTab;
- if( eType==IN_INDEX_ROWID ){
- pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iReg);
- }else{
- pIn->addrInTop = sqlite3VdbeAddOp3(v, OP_Column, iTab, 0, iReg);
+ int iMap = 0; /* Index in aiMap[] */
+ pIn += i;
+ for(i=iEq;i<pLoop->nLTerm; i++){
+ if( pLoop->aLTerm[i]->pExpr==pX ){
+ int iOut = iReg + i - iEq;
+ if( eType==IN_INDEX_ROWID ){
+ testcase( nEq>1 ); /* Happens with a UNIQUE index on ROWID */
+ pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iOut);
+ }else{
+ int iCol = aiMap ? aiMap[iMap++] : 0;
+ pIn->addrInTop = sqlite3VdbeAddOp3(v,OP_Column,iTab, iCol, iOut);
+ }
+ sqlite3VdbeAddOp1(v, OP_IsNull, iOut); VdbeCoverage(v);
+ if( i==iEq ){
+ pIn->iCur = iTab;
+ pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen;
+ }else{
+ pIn->eEndLoopOp = OP_Noop;
+ }
+ pIn++;
+ }
}
- pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen;
- sqlite3VdbeAddOp1(v, OP_IsNull, iReg); VdbeCoverage(v);
}else{
pLevel->u.in.nIn = 0;
}
+ sqlite3DbFree(pParse->db, aiMap);
#endif
}
disableTerm(pLevel, pTerm);
pParse->nMem += nReg;
zAff = sqlite3DbStrDup(pParse->db,sqlite3IndexAffinityStr(pParse->db,pIdx));
- if( !zAff ){
- pParse->db->mallocFailed = 1;
- }
+ assert( zAff!=0 || pParse->db->mallocFailed );
if( nSkip ){
int iIdxCur = pLevel->iIdxCur;
sqlite3VdbeAddOp2(v, OP_SCopy, r1, regBase+j);
}
}
- testcase( pTerm->eOperator & WO_ISNULL );
- testcase( pTerm->eOperator & WO_IN );
- if( (pTerm->eOperator & (WO_ISNULL|WO_IN))==0 ){
+ if( pTerm->eOperator & WO_IN ){
+ if( pTerm->pExpr->flags & EP_xIsSelect ){
+ /* No affinity ever needs to be (or should be) applied to a value
+ ** from the RHS of an "? IN (SELECT ...)" expression. The
+ ** sqlite3FindInIndex() routine has already ensured that the
+ ** affinity of the comparison has been applied to the value. */
+ if( zAff ) zAff[j] = SQLITE_AFF_BLOB;
+ }
+ }else if( (pTerm->eOperator & WO_ISNULL)==0 ){
Expr *pRight = pTerm->pExpr->pRight;
if( (pTerm->wtFlags & TERM_IS)==0 && sqlite3ExprCanBeNull(pRight) ){
sqlite3VdbeAddOp2(v, OP_IsNull, regBase+j, pLevel->addrBrk);
return regBase;
}
+#ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
/*
-** If the most recently coded instruction is a constant range contraint
-** that originated from the LIKE optimization, then change the P3 to be
-** pLoop->iLikeRepCntr and set P5.
+** If the most recently coded instruction is a constant range constraint
+** (a string literal) that originated from the LIKE optimization, then
+** set P3 and P5 on the OP_String opcode so that the string will be cast
+** to a BLOB at appropriate times.
**
** The LIKE optimization trys to evaluate "x LIKE 'abc%'" as a range
** expression: "x>='ABC' AND x<'abd'". But this requires that the range
** scan loop run twice, once for strings and a second time for BLOBs.
** The OP_String opcodes on the second pass convert the upper and lower
-** bound string contants to blobs. This routine makes the necessary changes
+** bound string constants to blobs. This routine makes the necessary changes
** to the OP_String opcodes for that to happen.
+**
+** Except, of course, if SQLITE_LIKE_DOESNT_MATCH_BLOBS is defined, then
+** only the one pass through the string space is required, so this routine
+** becomes a no-op.
*/
static void whereLikeOptimizationStringFixup(
Vdbe *v, /* prepared statement under construction */
assert( pOp!=0 );
assert( pOp->opcode==OP_String8
|| pTerm->pWC->pWInfo->pParse->db->mallocFailed );
- pOp->p3 = pLevel->iLikeRepCntr;
- pOp->p5 = 1;
+ pOp->p3 = (int)(pLevel->iLikeRepCntr>>1); /* Register holding counter */
+ pOp->p5 = (u8)(pLevel->iLikeRepCntr&1); /* ASC or DESC */
+ }
+}
+#else
+# define whereLikeOptimizationStringFixup(A,B,C)
+#endif
+
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+/*
+** Information is passed from codeCursorHint() down to individual nodes of
+** the expression tree (by sqlite3WalkExpr()) using an instance of this
+** structure.
+*/
+struct CCurHint {
+ int iTabCur; /* Cursor for the main table */
+ int iIdxCur; /* Cursor for the index, if pIdx!=0. Unused otherwise */
+ Index *pIdx; /* The index used to access the table */
+};
+
+/*
+** This function is called for every node of an expression that is a candidate
+** for a cursor hint on an index cursor. For TK_COLUMN nodes that reference
+** the table CCurHint.iTabCur, verify that the same column can be
+** accessed through the index. If it cannot, then set pWalker->eCode to 1.
+*/
+static int codeCursorHintCheckExpr(Walker *pWalker, Expr *pExpr){
+ struct CCurHint *pHint = pWalker->u.pCCurHint;
+ assert( pHint->pIdx!=0 );
+ if( pExpr->op==TK_COLUMN
+ && pExpr->iTable==pHint->iTabCur
+ && sqlite3ColumnOfIndex(pHint->pIdx, pExpr->iColumn)<0
+ ){
+ pWalker->eCode = 1;
+ }
+ return WRC_Continue;
+}
+
+/*
+** Test whether or not expression pExpr, which was part of a WHERE clause,
+** should be included in the cursor-hint for a table that is on the rhs
+** of a LEFT JOIN. Set Walker.eCode to non-zero before returning if the
+** expression is not suitable.
+**
+** An expression is unsuitable if it might evaluate to non NULL even if
+** a TK_COLUMN node that does affect the value of the expression is set
+** to NULL. For example:
+**
+** col IS NULL
+** col IS NOT NULL
+** coalesce(col, 1)
+** CASE WHEN col THEN 0 ELSE 1 END
+*/
+static int codeCursorHintIsOrFunction(Walker *pWalker, Expr *pExpr){
+ if( pExpr->op==TK_IS
+ || pExpr->op==TK_ISNULL || pExpr->op==TK_ISNOT
+ || pExpr->op==TK_NOTNULL || pExpr->op==TK_CASE
+ ){
+ pWalker->eCode = 1;
+ }else if( pExpr->op==TK_FUNCTION ){
+ int d1;
+ char d2[4];
+ if( 0==sqlite3IsLikeFunction(pWalker->pParse->db, pExpr, &d1, d2) ){
+ pWalker->eCode = 1;
+ }
}
+
+ return WRC_Continue;
}
+/*
+** This function is called on every node of an expression tree used as an
+** argument to the OP_CursorHint instruction. If the node is a TK_COLUMN
+** that accesses any table other than the one identified by
+** CCurHint.iTabCur, then do the following:
+**
+** 1) allocate a register and code an OP_Column instruction to read
+** the specified column into the new register, and
+**
+** 2) transform the expression node to a TK_REGISTER node that reads
+** from the newly populated register.
+**
+** Also, if the node is a TK_COLUMN that does access the table idenified
+** by pCCurHint.iTabCur, and an index is being used (which we will
+** know because CCurHint.pIdx!=0) then transform the TK_COLUMN into
+** an access of the index rather than the original table.
+*/
+static int codeCursorHintFixExpr(Walker *pWalker, Expr *pExpr){
+ int rc = WRC_Continue;
+ struct CCurHint *pHint = pWalker->u.pCCurHint;
+ if( pExpr->op==TK_COLUMN ){
+ if( pExpr->iTable!=pHint->iTabCur ){
+ Vdbe *v = pWalker->pParse->pVdbe;
+ int reg = ++pWalker->pParse->nMem; /* Register for column value */
+ sqlite3ExprCodeGetColumnOfTable(
+ v, pExpr->pTab, pExpr->iTable, pExpr->iColumn, reg
+ );
+ pExpr->op = TK_REGISTER;
+ pExpr->iTable = reg;
+ }else if( pHint->pIdx!=0 ){
+ pExpr->iTable = pHint->iIdxCur;
+ pExpr->iColumn = sqlite3ColumnOfIndex(pHint->pIdx, pExpr->iColumn);
+ assert( pExpr->iColumn>=0 );
+ }
+ }else if( pExpr->op==TK_AGG_FUNCTION ){
+ /* An aggregate function in the WHERE clause of a query means this must
+ ** be a correlated sub-query, and expression pExpr is an aggregate from
+ ** the parent context. Do not walk the function arguments in this case.
+ **
+ ** todo: It should be possible to replace this node with a TK_REGISTER
+ ** expression, as the result of the expression must be stored in a
+ ** register at this point. The same holds for TK_AGG_COLUMN nodes. */
+ rc = WRC_Prune;
+ }
+ return rc;
+}
+
+/*
+** Insert an OP_CursorHint instruction if it is appropriate to do so.
+*/
+static void codeCursorHint(
+ struct SrcList_item *pTabItem, /* FROM clause item */
+ WhereInfo *pWInfo, /* The where clause */
+ WhereLevel *pLevel, /* Which loop to provide hints for */
+ WhereTerm *pEndRange /* Hint this end-of-scan boundary term if not NULL */
+){
+ Parse *pParse = pWInfo->pParse;
+ sqlite3 *db = pParse->db;
+ Vdbe *v = pParse->pVdbe;
+ Expr *pExpr = 0;
+ WhereLoop *pLoop = pLevel->pWLoop;
+ int iCur;
+ WhereClause *pWC;
+ WhereTerm *pTerm;
+ int i, j;
+ struct CCurHint sHint;
+ Walker sWalker;
+
+ if( OptimizationDisabled(db, SQLITE_CursorHints) ) return;
+ iCur = pLevel->iTabCur;
+ assert( iCur==pWInfo->pTabList->a[pLevel->iFrom].iCursor );
+ sHint.iTabCur = iCur;
+ sHint.iIdxCur = pLevel->iIdxCur;
+ sHint.pIdx = pLoop->u.btree.pIndex;
+ memset(&sWalker, 0, sizeof(sWalker));
+ sWalker.pParse = pParse;
+ sWalker.u.pCCurHint = &sHint;
+ pWC = &pWInfo->sWC;
+ for(i=0; i<pWC->nTerm; i++){
+ pTerm = &pWC->a[i];
+ if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
+ if( pTerm->prereqAll & pLevel->notReady ) continue;
+
+ /* Any terms specified as part of the ON(...) clause for any LEFT
+ ** JOIN for which the current table is not the rhs are omitted
+ ** from the cursor-hint.
+ **
+ ** If this table is the rhs of a LEFT JOIN, "IS" or "IS NULL" terms
+ ** that were specified as part of the WHERE clause must be excluded.
+ ** This is to address the following:
+ **
+ ** SELECT ... t1 LEFT JOIN t2 ON (t1.a=t2.b) WHERE t2.c IS NULL;
+ **
+ ** Say there is a single row in t2 that matches (t1.a=t2.b), but its
+ ** t2.c values is not NULL. If the (t2.c IS NULL) constraint is
+ ** pushed down to the cursor, this row is filtered out, causing
+ ** SQLite to synthesize a row of NULL values. Which does match the
+ ** WHERE clause, and so the query returns a row. Which is incorrect.
+ **
+ ** For the same reason, WHERE terms such as:
+ **
+ ** WHERE 1 = (t2.c IS NULL)
+ **
+ ** are also excluded. See codeCursorHintIsOrFunction() for details.
+ */
+ if( pTabItem->fg.jointype & JT_LEFT ){
+ Expr *pExpr = pTerm->pExpr;
+ if( !ExprHasProperty(pExpr, EP_FromJoin)
+ || pExpr->iRightJoinTable!=pTabItem->iCursor
+ ){
+ sWalker.eCode = 0;
+ sWalker.xExprCallback = codeCursorHintIsOrFunction;
+ sqlite3WalkExpr(&sWalker, pTerm->pExpr);
+ if( sWalker.eCode ) continue;
+ }
+ }else{
+ if( ExprHasProperty(pTerm->pExpr, EP_FromJoin) ) continue;
+ }
+
+ /* All terms in pWLoop->aLTerm[] except pEndRange are used to initialize
+ ** the cursor. These terms are not needed as hints for a pure range
+ ** scan (that has no == terms) so omit them. */
+ if( pLoop->u.btree.nEq==0 && pTerm!=pEndRange ){
+ for(j=0; j<pLoop->nLTerm && pLoop->aLTerm[j]!=pTerm; j++){}
+ if( j<pLoop->nLTerm ) continue;
+ }
+
+ /* No subqueries or non-deterministic functions allowed */
+ if( sqlite3ExprContainsSubquery(pTerm->pExpr) ) continue;
+
+ /* For an index scan, make sure referenced columns are actually in
+ ** the index. */
+ if( sHint.pIdx!=0 ){
+ sWalker.eCode = 0;
+ sWalker.xExprCallback = codeCursorHintCheckExpr;
+ sqlite3WalkExpr(&sWalker, pTerm->pExpr);
+ if( sWalker.eCode ) continue;
+ }
+
+ /* If we survive all prior tests, that means this term is worth hinting */
+ pExpr = sqlite3ExprAnd(db, pExpr, sqlite3ExprDup(db, pTerm->pExpr, 0));
+ }
+ if( pExpr!=0 ){
+ sWalker.xExprCallback = codeCursorHintFixExpr;
+ sqlite3WalkExpr(&sWalker, pExpr);
+ sqlite3VdbeAddOp4(v, OP_CursorHint,
+ (sHint.pIdx ? sHint.iIdxCur : sHint.iTabCur), 0, 0,
+ (const char*)pExpr, P4_EXPR);
+ }
+}
+#else
+# define codeCursorHint(A,B,C,D) /* No-op */
+#endif /* SQLITE_ENABLE_CURSOR_HINTS */
+
+/*
+** Cursor iCur is open on an intkey b-tree (a table). Register iRowid contains
+** a rowid value just read from cursor iIdxCur, open on index pIdx. This
+** function generates code to do a deferred seek of cursor iCur to the
+** rowid stored in register iRowid.
+**
+** Normally, this is just:
+**
+** OP_DeferredSeek $iCur $iRowid
+**
+** However, if the scan currently being coded is a branch of an OR-loop and
+** the statement currently being coded is a SELECT, then P3 of OP_DeferredSeek
+** is set to iIdxCur and P4 is set to point to an array of integers
+** containing one entry for each column of the table cursor iCur is open
+** on. For each table column, if the column is the i'th column of the
+** index, then the corresponding array entry is set to (i+1). If the column
+** does not appear in the index at all, the array entry is set to 0.
+*/
+static void codeDeferredSeek(
+ WhereInfo *pWInfo, /* Where clause context */
+ Index *pIdx, /* Index scan is using */
+ int iCur, /* Cursor for IPK b-tree */
+ int iIdxCur /* Index cursor */
+){
+ Parse *pParse = pWInfo->pParse; /* Parse context */
+ Vdbe *v = pParse->pVdbe; /* Vdbe to generate code within */
+
+ assert( iIdxCur>0 );
+ assert( pIdx->aiColumn[pIdx->nColumn-1]==-1 );
+
+ sqlite3VdbeAddOp3(v, OP_DeferredSeek, iIdxCur, 0, iCur);
+ if( (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)
+ && DbMaskAllZero(sqlite3ParseToplevel(pParse)->writeMask)
+ ){
+ int i;
+ Table *pTab = pIdx->pTable;
+ int *ai = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int)*(pTab->nCol+1));
+ if( ai ){
+ ai[0] = pTab->nCol;
+ for(i=0; i<pIdx->nColumn-1; i++){
+ assert( pIdx->aiColumn[i]<pTab->nCol );
+ if( pIdx->aiColumn[i]>=0 ) ai[pIdx->aiColumn[i]+1] = i+1;
+ }
+ sqlite3VdbeChangeP4(v, -1, (char*)ai, P4_INTARRAY);
+ }
+ }
+}
+
+/*
+** If the expression passed as the second argument is a vector, generate
+** code to write the first nReg elements of the vector into an array
+** of registers starting with iReg.
+**
+** If the expression is not a vector, then nReg must be passed 1. In
+** this case, generate code to evaluate the expression and leave the
+** result in register iReg.
+*/
+static void codeExprOrVector(Parse *pParse, Expr *p, int iReg, int nReg){
+ assert( nReg>0 );
+ if( p && sqlite3ExprIsVector(p) ){
+#ifndef SQLITE_OMIT_SUBQUERY
+ if( (p->flags & EP_xIsSelect) ){
+ Vdbe *v = pParse->pVdbe;
+ int iSelect = sqlite3CodeSubselect(pParse, p, 0, 0);
+ sqlite3VdbeAddOp3(v, OP_Copy, iSelect, iReg, nReg-1);
+ }else
+#endif
+ {
+ int i;
+ ExprList *pList = p->x.pList;
+ assert( nReg<=pList->nExpr );
+ for(i=0; i<nReg; i++){
+ sqlite3ExprCode(pParse, pList->a[i].pExpr, iReg+i);
+ }
+ }
+ }else{
+ assert( nReg==1 );
+ sqlite3ExprCode(pParse, p, iReg);
+ }
+}
+
+/* An instance of the IdxExprTrans object carries information about a
+** mapping from an expression on table columns into a column in an index
+** down through the Walker.
+*/
+typedef struct IdxExprTrans {
+ Expr *pIdxExpr; /* The index expression */
+ int iTabCur; /* The cursor of the corresponding table */
+ int iIdxCur; /* The cursor for the index */
+ int iIdxCol; /* The column for the index */
+} IdxExprTrans;
+
+/* The walker node callback used to transform matching expressions into
+** a reference to an index column for an index on an expression.
+**
+** If pExpr matches, then transform it into a reference to the index column
+** that contains the value of pExpr.
+*/
+static int whereIndexExprTransNode(Walker *p, Expr *pExpr){
+ IdxExprTrans *pX = p->u.pIdxTrans;
+ if( sqlite3ExprCompare(0, pExpr, pX->pIdxExpr, pX->iTabCur)==0 ){
+ pExpr->op = TK_COLUMN;
+ pExpr->iTable = pX->iIdxCur;
+ pExpr->iColumn = pX->iIdxCol;
+ pExpr->pTab = 0;
+ return WRC_Prune;
+ }else{
+ return WRC_Continue;
+ }
+}
+
+/*
+** For an indexes on expression X, locate every instance of expression X
+** in pExpr and change that subexpression into a reference to the appropriate
+** column of the index.
+*/
+static void whereIndexExprTrans(
+ Index *pIdx, /* The Index */
+ int iTabCur, /* Cursor of the table that is being indexed */
+ int iIdxCur, /* Cursor of the index itself */
+ WhereInfo *pWInfo /* Transform expressions in this WHERE clause */
+){
+ int iIdxCol; /* Column number of the index */
+ ExprList *aColExpr; /* Expressions that are indexed */
+ Walker w;
+ IdxExprTrans x;
+ aColExpr = pIdx->aColExpr;
+ if( aColExpr==0 ) return; /* Not an index on expressions */
+ memset(&w, 0, sizeof(w));
+ w.xExprCallback = whereIndexExprTransNode;
+ w.u.pIdxTrans = &x;
+ x.iTabCur = iTabCur;
+ x.iIdxCur = iIdxCur;
+ for(iIdxCol=0; iIdxCol<aColExpr->nExpr; iIdxCol++){
+ if( pIdx->aiColumn[iIdxCol]!=XN_EXPR ) continue;
+ assert( aColExpr->a[iIdxCol].pExpr!=0 );
+ x.iIdxCol = iIdxCol;
+ x.pIdxExpr = aColExpr->a[iIdxCol].pExpr;
+ sqlite3WalkExpr(&w, pWInfo->pWhere);
+ sqlite3WalkExprList(&w, pWInfo->pOrderBy);
+ sqlite3WalkExprList(&w, pWInfo->pResultSet);
+ }
+}
+
/*
** Generate code for the start of the iLevel-th loop in the WHERE clause
** implementation described by pWInfo.
Vdbe *v; /* The prepared stmt under constructions */
struct SrcList_item *pTabItem; /* FROM clause term being coded */
int addrBrk; /* Jump here to break out of the loop */
+ int addrHalt; /* addrBrk for the outermost loop */
int addrCont; /* Jump here to continue with next cycle */
int iRowidReg = 0; /* Rowid is stored in this register, if not zero */
int iReleaseReg = 0; /* Temp register to free before returning */
+ Index *pIdx = 0; /* Index used by loop (if any) */
+ int iLoop; /* Iteration of constraint generator loop */
pParse = pWInfo->pParse;
v = pParse->pVdbe;
pLevel->notReady = notReady & ~sqlite3WhereGetMask(&pWInfo->sMaskSet, iCur);
bRev = (pWInfo->revMask>>iLevel)&1;
omitTable = (pLoop->wsFlags & WHERE_IDX_ONLY)!=0
- && (pWInfo->wctrlFlags & WHERE_FORCE_TABLE)==0;
+ && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)==0;
VdbeModuleComment((v, "Begin WHERE-loop%d: %s",iLevel,pTabItem->pTab->zName));
/* Create labels for the "break" and "continue" instructions
VdbeComment((v, "init LEFT JOIN no-match flag"));
}
+ /* Compute a safe address to jump to if we discover that the table for
+ ** this loop is empty and can never contribute content. */
+ for(j=iLevel; j>0 && pWInfo->a[j].iLeftJoin==0; j--){}
+ addrHalt = pWInfo->a[j].addrBrk;
+
/* Special case of a FROM clause subquery implemented as a co-routine */
if( pTabItem->fg.viaCoroutine ){
int regYield = pTabItem->regReturn;
int iReg; /* P3 Value for OP_VFilter */
int addrNotFound;
int nConstraint = pLoop->nLTerm;
+ int iIn; /* Counter for IN constraints */
sqlite3ExprCachePush(pParse);
iReg = sqlite3GetTempRange(pParse, nConstraint+2);
for(j=0; j<nConstraint; j++){
int iTarget = iReg+j+2;
pTerm = pLoop->aLTerm[j];
- if( pTerm==0 ) continue;
+ if( NEVER(pTerm==0) ) continue;
if( pTerm->eOperator & WO_IN ){
codeEqualityTerm(pParse, pTerm, pLevel, j, bRev, iTarget);
addrNotFound = pLevel->addrNxt;
}else{
- sqlite3ExprCode(pParse, pTerm->pExpr->pRight, iTarget);
+ Expr *pRight = pTerm->pExpr->pRight;
+ codeExprOrVector(pParse, pRight, iTarget, 1);
}
}
sqlite3VdbeAddOp2(v, OP_Integer, pLoop->u.vtab.idxNum, iReg);
sqlite3VdbeAddOp2(v, OP_Integer, nConstraint, iReg+1);
sqlite3VdbeAddOp4(v, OP_VFilter, iCur, addrNotFound, iReg,
pLoop->u.vtab.idxStr,
- pLoop->u.vtab.needFree ? P4_MPRINTF : P4_STATIC);
+ pLoop->u.vtab.needFree ? P4_DYNAMIC : P4_STATIC);
VdbeCoverage(v);
pLoop->u.vtab.needFree = 0;
- for(j=0; j<nConstraint && j<16; j++){
- if( (pLoop->u.vtab.omitMask>>j)&1 ){
- disableTerm(pLevel, pLoop->aLTerm[j]);
- }
- }
pLevel->p1 = iCur;
pLevel->op = pWInfo->eOnePass ? OP_Noop : OP_VNext;
pLevel->p2 = sqlite3VdbeCurrentAddr(v);
- sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2);
+ iIn = pLevel->u.in.nIn;
+ for(j=nConstraint-1; j>=0; j--){
+ pTerm = pLoop->aLTerm[j];
+ if( j<16 && (pLoop->u.vtab.omitMask>>j)&1 ){
+ disableTerm(pLevel, pTerm);
+ }else if( (pTerm->eOperator & WO_IN)!=0 ){
+ Expr *pCompare; /* The comparison operator */
+ Expr *pRight; /* RHS of the comparison */
+ VdbeOp *pOp; /* Opcode to access the value of the IN constraint */
+
+ /* Reload the constraint value into reg[iReg+j+2]. The same value
+ ** was loaded into the same register prior to the OP_VFilter, but
+ ** the xFilter implementation might have changed the datatype or
+ ** encoding of the value in the register, so it *must* be reloaded. */
+ assert( pLevel->u.in.aInLoop!=0 || db->mallocFailed );
+ if( !db->mallocFailed ){
+ assert( iIn>0 );
+ pOp = sqlite3VdbeGetOp(v, pLevel->u.in.aInLoop[--iIn].addrInTop);
+ assert( pOp->opcode==OP_Column || pOp->opcode==OP_Rowid );
+ assert( pOp->opcode!=OP_Column || pOp->p3==iReg+j+2 );
+ assert( pOp->opcode!=OP_Rowid || pOp->p2==iReg+j+2 );
+ testcase( pOp->opcode==OP_Rowid );
+ sqlite3VdbeAddOp3(v, pOp->opcode, pOp->p1, pOp->p2, pOp->p3);
+ }
+
+ /* Generate code that will continue to the next row if
+ ** the IN constraint is not satisfied */
+ pCompare = sqlite3PExpr(pParse, TK_EQ, 0, 0);
+ assert( pCompare!=0 || db->mallocFailed );
+ if( pCompare ){
+ pCompare->pLeft = pTerm->pExpr->pLeft;
+ pCompare->pRight = pRight = sqlite3Expr(db, TK_REGISTER, 0);
+ if( pRight ){
+ pRight->iTable = iReg+j+2;
+ sqlite3ExprIfFalse(pParse, pCompare, pLevel->addrCont, 0);
+ }
+ pCompare->pLeft = 0;
+ sqlite3ExprDelete(db, pCompare);
+ }
+ }
+ }
+ /* These registers need to be preserved in case there is an IN operator
+ ** loop. So we could deallocate the registers here (and potentially
+ ** reuse them later) if (pLoop->wsFlags & WHERE_IN_ABLE)==0. But it seems
+ ** simpler and safer to simply not reuse the registers.
+ **
+ ** sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2);
+ */
sqlite3ExprCachePop(pParse);
}else
#endif /* SQLITE_OMIT_VIRTUALTABLE */
iRowidReg = codeEqualityTerm(pParse, pTerm, pLevel, 0, bRev, iReleaseReg);
if( iRowidReg!=iReleaseReg ) sqlite3ReleaseTempReg(pParse, iReleaseReg);
addrNxt = pLevel->addrNxt;
- sqlite3VdbeAddOp2(v, OP_MustBeInt, iRowidReg, addrNxt); VdbeCoverage(v);
- sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addrNxt, iRowidReg);
+ sqlite3VdbeAddOp3(v, OP_SeekRowid, iCur, addrNxt, iRowidReg);
VdbeCoverage(v);
sqlite3ExprCacheAffinityChange(pParse, iRowidReg, 1);
sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
pStart = pEnd;
pEnd = pTerm;
}
+ codeCursorHint(pTabItem, pWInfo, pLevel, pEnd);
if( pStart ){
Expr *pX; /* The expression that defines the start bound */
int r1, rTemp; /* Registers for holding the start boundary */
+ int op; /* Cursor seek operation */
/* The following constant maps TK_xx codes into corresponding
** seek opcodes. It depends on a particular ordering of TK_xx
pX = pStart->pExpr;
assert( pX!=0 );
testcase( pStart->leftCursor!=iCur ); /* transitive constraints */
- r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp);
- sqlite3VdbeAddOp3(v, aMoveOp[pX->op-TK_GT], iCur, addrBrk, r1);
+ if( sqlite3ExprIsVector(pX->pRight) ){
+ r1 = rTemp = sqlite3GetTempReg(pParse);
+ codeExprOrVector(pParse, pX->pRight, r1, 1);
+ testcase( pX->op==TK_GT );
+ testcase( pX->op==TK_GE );
+ testcase( pX->op==TK_LT );
+ testcase( pX->op==TK_LE );
+ op = aMoveOp[((pX->op - TK_GT - 1) & 0x3) | 0x1];
+ assert( pX->op!=TK_GT || op==OP_SeekGE );
+ assert( pX->op!=TK_GE || op==OP_SeekGE );
+ assert( pX->op!=TK_LT || op==OP_SeekLE );
+ assert( pX->op!=TK_LE || op==OP_SeekLE );
+ }else{
+ r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp);
+ disableTerm(pLevel, pStart);
+ op = aMoveOp[(pX->op - TK_GT)];
+ }
+ sqlite3VdbeAddOp3(v, op, iCur, addrBrk, r1);
VdbeComment((v, "pk"));
VdbeCoverageIf(v, pX->op==TK_GT);
VdbeCoverageIf(v, pX->op==TK_LE);
VdbeCoverageIf(v, pX->op==TK_GE);
sqlite3ExprCacheAffinityChange(pParse, r1, 1);
sqlite3ReleaseTempReg(pParse, rTemp);
- disableTerm(pLevel, pStart);
}else{
- sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk);
+ sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrHalt);
VdbeCoverageIf(v, bRev==0);
VdbeCoverageIf(v, bRev!=0);
}
testcase( pEnd->leftCursor!=iCur ); /* Transitive constraints */
testcase( pEnd->wtFlags & TERM_VIRTUAL );
memEndValue = ++pParse->nMem;
- sqlite3ExprCode(pParse, pX->pRight, memEndValue);
- if( pX->op==TK_LT || pX->op==TK_GT ){
+ codeExprOrVector(pParse, pX->pRight, memEndValue, 1);
+ if( 0==sqlite3ExprIsVector(pX->pRight)
+ && (pX->op==TK_LT || pX->op==TK_GT)
+ ){
testOp = bRev ? OP_Le : OP_Ge;
}else{
testOp = bRev ? OP_Lt : OP_Gt;
}
- disableTerm(pLevel, pEnd);
+ if( 0==sqlite3ExprIsVector(pX->pRight) ){
+ disableTerm(pLevel, pEnd);
+ }
}
start = sqlite3VdbeCurrentAddr(v);
pLevel->op = bRev ? OP_Prev : OP_Next;
OP_IdxLT, /* 3: (end_constraints && bRev && endEq) */
};
u16 nEq = pLoop->u.btree.nEq; /* Number of == or IN terms */
+ u16 nBtm = pLoop->u.btree.nBtm; /* Length of BTM vector */
+ u16 nTop = pLoop->u.btree.nTop; /* Length of TOP vector */
int regBase; /* Base register holding constraint values */
WhereTerm *pRangeStart = 0; /* Inequality constraint at range start */
WhereTerm *pRangeEnd = 0; /* Inequality constraint at range end */
int endEq; /* True if range end uses ==, >= or <= */
int start_constraints; /* Start of range is constrained */
int nConstraint; /* Number of constraint terms */
- Index *pIdx; /* The index we will be using */
int iIdxCur; /* The VDBE cursor for the index */
int nExtraReg = 0; /* Number of extra registers needed */
int op; /* Instruction opcode */
char *zStartAff; /* Affinity for start of range constraint */
- char cEndAff = 0; /* Affinity for end of range constraint */
+ char *zEndAff = 0; /* Affinity for end of range constraint */
u8 bSeekPastNull = 0; /* True to seek past initial nulls */
u8 bStopAtNull = 0; /* Add condition to terminate at NULLs */
j = nEq;
if( pLoop->wsFlags & WHERE_BTM_LIMIT ){
pRangeStart = pLoop->aLTerm[j++];
- nExtraReg = 1;
+ nExtraReg = MAX(nExtraReg, pLoop->u.btree.nBtm);
/* Like optimization range constraints always occur in pairs */
assert( (pRangeStart->wtFlags & TERM_LIKEOPT)==0 ||
(pLoop->wsFlags & WHERE_TOP_LIMIT)!=0 );
}
if( pLoop->wsFlags & WHERE_TOP_LIMIT ){
pRangeEnd = pLoop->aLTerm[j++];
- nExtraReg = 1;
+ nExtraReg = MAX(nExtraReg, pLoop->u.btree.nTop);
+#ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
if( (pRangeEnd->wtFlags & TERM_LIKEOPT)!=0 ){
assert( pRangeStart!=0 ); /* LIKE opt constraints */
assert( pRangeStart->wtFlags & TERM_LIKEOPT ); /* occur in pairs */
- pLevel->iLikeRepCntr = ++pParse->nMem;
- testcase( bRev );
- testcase( pIdx->aSortOrder[nEq]==SQLITE_SO_DESC );
- sqlite3VdbeAddOp2(v, OP_Integer,
- bRev ^ (pIdx->aSortOrder[nEq]==SQLITE_SO_DESC),
- pLevel->iLikeRepCntr);
+ pLevel->iLikeRepCntr = (u32)++pParse->nMem;
+ sqlite3VdbeAddOp2(v, OP_Integer, 1, (int)pLevel->iLikeRepCntr);
VdbeComment((v, "LIKE loop counter"));
pLevel->addrLikeRep = sqlite3VdbeCurrentAddr(v);
+ /* iLikeRepCntr actually stores 2x the counter register number. The
+ ** bottom bit indicates whether the search order is ASC or DESC. */
+ testcase( bRev );
+ testcase( pIdx->aSortOrder[nEq]==SQLITE_SO_DESC );
+ assert( (bRev & ~1)==0 );
+ pLevel->iLikeRepCntr <<=1;
+ pLevel->iLikeRepCntr |= bRev ^ (pIdx->aSortOrder[nEq]==SQLITE_SO_DESC);
}
- if( pRangeStart==0
- && (j = pIdx->aiColumn[nEq])>=0
- && pIdx->pTable->aCol[j].notNull==0
- ){
- bSeekPastNull = 1;
+#endif
+ if( pRangeStart==0 ){
+ j = pIdx->aiColumn[nEq];
+ if( (j>=0 && pIdx->pTable->aCol[j].notNull==0) || j==XN_EXPR ){
+ bSeekPastNull = 1;
+ }
}
}
assert( pRangeEnd==0 || (pRangeEnd->wtFlags & TERM_VNULL)==0 );
- /* Generate code to evaluate all constraint terms using == or IN
- ** and store the values of those terms in an array of registers
- ** starting at regBase.
- */
- regBase = codeAllEqualityTerms(pParse,pLevel,bRev,nExtraReg,&zStartAff);
- assert( zStartAff==0 || sqlite3Strlen30(zStartAff)>=nEq );
- if( zStartAff ) cEndAff = zStartAff[nEq];
- addrNxt = pLevel->addrNxt;
-
/* If we are doing a reverse order scan on an ascending index, or
** a forward order scan on a descending index, interchange the
** start and end terms (pRangeStart and pRangeEnd).
){
SWAP(WhereTerm *, pRangeEnd, pRangeStart);
SWAP(u8, bSeekPastNull, bStopAtNull);
+ SWAP(u8, nBtm, nTop);
}
+ /* Generate code to evaluate all constraint terms using == or IN
+ ** and store the values of those terms in an array of registers
+ ** starting at regBase.
+ */
+ codeCursorHint(pTabItem, pWInfo, pLevel, pRangeEnd);
+ regBase = codeAllEqualityTerms(pParse,pLevel,bRev,nExtraReg,&zStartAff);
+ assert( zStartAff==0 || sqlite3Strlen30(zStartAff)>=nEq );
+ if( zStartAff && nTop ){
+ zEndAff = sqlite3DbStrDup(db, &zStartAff[nEq]);
+ }
+ addrNxt = pLevel->addrNxt;
+
testcase( pRangeStart && (pRangeStart->eOperator & WO_LE)!=0 );
testcase( pRangeStart && (pRangeStart->eOperator & WO_GE)!=0 );
testcase( pRangeEnd && (pRangeEnd->eOperator & WO_LE)!=0 );
nConstraint = nEq;
if( pRangeStart ){
Expr *pRight = pRangeStart->pExpr->pRight;
- sqlite3ExprCode(pParse, pRight, regBase+nEq);
+ codeExprOrVector(pParse, pRight, regBase+nEq, nBtm);
whereLikeOptimizationStringFixup(v, pLevel, pRangeStart);
if( (pRangeStart->wtFlags & TERM_VNULL)==0
&& sqlite3ExprCanBeNull(pRight)
VdbeCoverage(v);
}
if( zStartAff ){
- if( sqlite3CompareAffinity(pRight, zStartAff[nEq])==SQLITE_AFF_BLOB){
- /* Since the comparison is to be performed with no conversions
- ** applied to the operands, set the affinity to apply to pRight to
- ** SQLITE_AFF_BLOB. */
- zStartAff[nEq] = SQLITE_AFF_BLOB;
- }
- if( sqlite3ExprNeedsNoAffinityChange(pRight, zStartAff[nEq]) ){
- zStartAff[nEq] = SQLITE_AFF_BLOB;
- }
+ updateRangeAffinityStr(pRight, nBtm, &zStartAff[nEq]);
}
- nConstraint++;
+ nConstraint += nBtm;
testcase( pRangeStart->wtFlags & TERM_VIRTUAL );
+ if( sqlite3ExprIsVector(pRight)==0 ){
+ disableTerm(pLevel, pRangeStart);
+ }else{
+ startEq = 1;
+ }
+ bSeekPastNull = 0;
}else if( bSeekPastNull ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq);
nConstraint++;
start_constraints = 1;
}
codeApplyAffinity(pParse, regBase, nConstraint - bSeekPastNull, zStartAff);
- op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev];
- assert( op!=0 );
- sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint);
- VdbeCoverage(v);
- VdbeCoverageIf(v, op==OP_Rewind); testcase( op==OP_Rewind );
- VdbeCoverageIf(v, op==OP_Last); testcase( op==OP_Last );
- VdbeCoverageIf(v, op==OP_SeekGT); testcase( op==OP_SeekGT );
- VdbeCoverageIf(v, op==OP_SeekGE); testcase( op==OP_SeekGE );
- VdbeCoverageIf(v, op==OP_SeekLE); testcase( op==OP_SeekLE );
- VdbeCoverageIf(v, op==OP_SeekLT); testcase( op==OP_SeekLT );
+ if( pLoop->nSkip>0 && nConstraint==pLoop->nSkip ){
+ /* The skip-scan logic inside the call to codeAllEqualityConstraints()
+ ** above has already left the cursor sitting on the correct row,
+ ** so no further seeking is needed */
+ }else{
+ op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev];
+ assert( op!=0 );
+ sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint);
+ VdbeCoverage(v);
+ VdbeCoverageIf(v, op==OP_Rewind); testcase( op==OP_Rewind );
+ VdbeCoverageIf(v, op==OP_Last); testcase( op==OP_Last );
+ VdbeCoverageIf(v, op==OP_SeekGT); testcase( op==OP_SeekGT );
+ VdbeCoverageIf(v, op==OP_SeekGE); testcase( op==OP_SeekGE );
+ VdbeCoverageIf(v, op==OP_SeekLE); testcase( op==OP_SeekLE );
+ VdbeCoverageIf(v, op==OP_SeekLT); testcase( op==OP_SeekLT );
+ }
/* Load the value for the inequality constraint at the end of the
** range (if any).
if( pRangeEnd ){
Expr *pRight = pRangeEnd->pExpr->pRight;
sqlite3ExprCacheRemove(pParse, regBase+nEq, 1);
- sqlite3ExprCode(pParse, pRight, regBase+nEq);
+ codeExprOrVector(pParse, pRight, regBase+nEq, nTop);
whereLikeOptimizationStringFixup(v, pLevel, pRangeEnd);
if( (pRangeEnd->wtFlags & TERM_VNULL)==0
&& sqlite3ExprCanBeNull(pRight)
sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt);
VdbeCoverage(v);
}
- if( sqlite3CompareAffinity(pRight, cEndAff)!=SQLITE_AFF_BLOB
- && !sqlite3ExprNeedsNoAffinityChange(pRight, cEndAff)
- ){
- codeApplyAffinity(pParse, regBase+nEq, 1, &cEndAff);
+ if( zEndAff ){
+ updateRangeAffinityStr(pRight, nTop, zEndAff);
+ codeApplyAffinity(pParse, regBase+nEq, nTop, zEndAff);
+ }else{
+ assert( pParse->db->mallocFailed );
}
- nConstraint++;
+ nConstraint += nTop;
testcase( pRangeEnd->wtFlags & TERM_VIRTUAL );
+
+ if( sqlite3ExprIsVector(pRight)==0 ){
+ disableTerm(pLevel, pRangeEnd);
+ }else{
+ endEq = 1;
+ }
}else if( bStopAtNull ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq);
+ sqlite3ExprCacheRemove(pParse, regBase+nEq, 1);
endEq = 0;
nConstraint++;
}
sqlite3DbFree(db, zStartAff);
+ sqlite3DbFree(db, zEndAff);
/* Top of the loop body */
pLevel->p2 = sqlite3VdbeCurrentAddr(v);
}
/* Seek the table cursor, if required */
- disableTerm(pLevel, pRangeStart);
- disableTerm(pLevel, pRangeEnd);
if( omitTable ){
/* pIdx is a covering index. No need to access the main table. */
}else if( HasRowid(pIdx->pTable) ){
- iRowidReg = ++pParse->nMem;
- sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg);
- sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
- if( pWInfo->eOnePass!=ONEPASS_OFF ){
+ if( (pWInfo->wctrlFlags & WHERE_SEEK_TABLE) || (
+ (pWInfo->wctrlFlags & WHERE_SEEK_UNIQ_TABLE)
+ && (pWInfo->eOnePass==ONEPASS_SINGLE)
+ )){
+ iRowidReg = ++pParse->nMem;
+ sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg);
+ sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, iRowidReg);
VdbeCoverage(v);
}else{
- sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg); /* Deferred seek */
+ codeDeferredSeek(pWInfo, pIdx, iCur, iIdxCur);
}
}else if( iCur!=iIdxCur ){
Index *pPk = sqlite3PrimaryKeyIndex(pIdx->pTable);
iRowidReg, pPk->nKeyCol); VdbeCoverage(v);
}
- /* Record the instruction used to terminate the loop. Disable
- ** WHERE clause terms made redundant by the index range scan.
+ /* If pIdx is an index on one or more expressions, then look through
+ ** all the expressions in pWInfo and try to transform matching expressions
+ ** into reference to index columns.
*/
+ whereIndexExprTrans(pIdx, iCur, iIdxCur, pWInfo);
+
+
+ /* Record the instruction used to terminate the loop. */
if( pLoop->wsFlags & WHERE_ONEROW ){
pLevel->op = OP_Noop;
}else if( bRev ){
}else{
assert( pLevel->p5==0 );
}
+ if( omitTable ) pIdx = 0;
}else
#ifndef SQLITE_OMIT_OR_OPTIMIZATION
u16 wctrlFlags; /* Flags for sub-WHERE clause */
Expr *pAndExpr = 0; /* An ".. AND (...)" expression */
Table *pTab = pTabItem->pTab;
-
+
pTerm = pLoop->aLTerm[0];
assert( pTerm!=0 );
assert( pTerm->eOperator & WO_OR );
Expr *pExpr = pWC->a[iTerm].pExpr;
if( &pWC->a[iTerm] == pTerm ) continue;
if( ExprHasProperty(pExpr, EP_FromJoin) ) continue;
- if( (pWC->a[iTerm].wtFlags & TERM_VIRTUAL)!=0 ) continue;
+ testcase( pWC->a[iTerm].wtFlags & TERM_VIRTUAL );
+ testcase( pWC->a[iTerm].wtFlags & TERM_CODED );
+ if( (pWC->a[iTerm].wtFlags & (TERM_VIRTUAL|TERM_CODED))!=0 ) continue;
if( (pWC->a[iTerm].eOperator & WO_ALL)==0 ) continue;
testcase( pWC->a[iTerm].wtFlags & TERM_ORINFO );
pExpr = sqlite3ExprDup(db, pExpr, 0);
pAndExpr = sqlite3ExprAnd(db, pAndExpr, pExpr);
}
if( pAndExpr ){
- pAndExpr = sqlite3PExpr(pParse, TK_AND, 0, pAndExpr, 0);
+ pAndExpr = sqlite3PExpr(pParse, TK_AND|TKFLG_DONTFOLD, 0, pAndExpr);
}
}
** eliminating duplicates from other WHERE clauses, the action for each
** sub-WHERE clause is to to invoke the main loop body as a subroutine.
*/
- wctrlFlags = WHERE_OMIT_OPEN_CLOSE
- | WHERE_FORCE_TABLE
- | WHERE_ONETABLE_ONLY
- | WHERE_NO_AUTOINDEX;
+ wctrlFlags = WHERE_OR_SUBCLAUSE | (pWInfo->wctrlFlags & WHERE_SEEK_TABLE);
for(ii=0; ii<pOrWc->nTerm; ii++){
WhereTerm *pOrTerm = &pOrWc->a[ii];
if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){
r = sqlite3GetTempRange(pParse, nPk);
for(iPk=0; iPk<nPk; iPk++){
int iCol = pPk->aiColumn[iPk];
- int rx;
- rx = sqlite3ExprCodeGetColumn(pParse, pTab, iCol, iCur,r+iPk,0);
- if( rx!=r+iPk ){
- sqlite3VdbeAddOp2(v, OP_SCopy, rx, r+iPk);
- }
+ sqlite3ExprCodeGetColumnToReg(pParse, pTab, iCol, iCur, r+iPk);
}
/* Check if the temp table already contains this key. If so,
}
if( iSet>=0 ){
sqlite3VdbeAddOp3(v, OP_MakeRecord, r, nPk, regRowid);
- sqlite3VdbeAddOp3(v, OP_IdxInsert, regRowset, regRowid, 0);
+ sqlite3VdbeAddOp4Int(v, OP_IdxInsert, regRowset, regRowid,
+ r, nPk);
if( iSet ) sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
}
){
assert( pSubWInfo->a[0].iIdxCur==iCovCur );
pCov = pSubLoop->u.btree.pIndex;
- wctrlFlags |= WHERE_REOPEN_IDX;
}else{
pCov = 0;
}
** a pseudo-cursor. No need to Rewind or Next such cursors. */
pLevel->op = OP_Noop;
}else{
+ codeCursorHint(pTabItem, pWInfo, pLevel, 0);
pLevel->op = aStep[bRev];
pLevel->p1 = iCur;
- pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrBrk);
+ pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrHalt);
VdbeCoverageIf(v, bRev==0);
VdbeCoverageIf(v, bRev!=0);
pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP;
/* Insert code to test every subexpression that can be completely
** computed using the current set of tables.
+ **
+ ** This loop may run between one and three times, depending on the
+ ** constraints to be generated. The value of stack variable iLoop
+ ** determines the constraints coded by each iteration, as follows:
+ **
+ ** iLoop==1: Code only expressions that are entirely covered by pIdx.
+ ** iLoop==2: Code remaining expressions that do not contain correlated
+ ** sub-queries.
+ ** iLoop==3: Code all remaining expressions.
+ **
+ ** An effort is made to skip unnecessary iterations of the loop.
*/
- for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
- Expr *pE;
- int skipLikeAddr = 0;
- testcase( pTerm->wtFlags & TERM_VIRTUAL );
- testcase( pTerm->wtFlags & TERM_CODED );
- if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
- if( (pTerm->prereqAll & pLevel->notReady)!=0 ){
- testcase( pWInfo->untestedTerms==0
- && (pWInfo->wctrlFlags & WHERE_ONETABLE_ONLY)!=0 );
- pWInfo->untestedTerms = 1;
- continue;
- }
- pE = pTerm->pExpr;
- assert( pE!=0 );
- if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){
- continue;
- }
- if( pTerm->wtFlags & TERM_LIKECOND ){
- assert( pLevel->iLikeRepCntr>0 );
- skipLikeAddr = sqlite3VdbeAddOp1(v, OP_IfNot, pLevel->iLikeRepCntr);
- VdbeCoverage(v);
+ iLoop = (pIdx ? 1 : 2);
+ do{
+ int iNext = 0; /* Next value for iLoop */
+ for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
+ Expr *pE;
+ int skipLikeAddr = 0;
+ testcase( pTerm->wtFlags & TERM_VIRTUAL );
+ testcase( pTerm->wtFlags & TERM_CODED );
+ if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
+ if( (pTerm->prereqAll & pLevel->notReady)!=0 ){
+ testcase( pWInfo->untestedTerms==0
+ && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 );
+ pWInfo->untestedTerms = 1;
+ continue;
+ }
+ pE = pTerm->pExpr;
+ assert( pE!=0 );
+ if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){
+ continue;
+ }
+
+ if( iLoop==1 && !sqlite3ExprCoveredByIndex(pE, pLevel->iTabCur, pIdx) ){
+ iNext = 2;
+ continue;
+ }
+ if( iLoop<3 && (pTerm->wtFlags & TERM_VARSELECT) ){
+ if( iNext==0 ) iNext = 3;
+ continue;
+ }
+
+ if( (pTerm->wtFlags & TERM_LIKECOND)!=0 ){
+ /* If the TERM_LIKECOND flag is set, that means that the range search
+ ** is sufficient to guarantee that the LIKE operator is true, so we
+ ** can skip the call to the like(A,B) function. But this only works
+ ** for strings. So do not skip the call to the function on the pass
+ ** that compares BLOBs. */
+#ifdef SQLITE_LIKE_DOESNT_MATCH_BLOBS
+ continue;
+#else
+ u32 x = pLevel->iLikeRepCntr;
+ if( x>0 ){
+ skipLikeAddr = sqlite3VdbeAddOp1(v, (x&1)?OP_IfNot:OP_If,(int)(x>>1));
+ }
+ VdbeCoverage(v);
+#endif
+ }
+#ifdef WHERETRACE_ENABLED /* 0xffff */
+ if( sqlite3WhereTrace ){
+ VdbeNoopComment((v, "WhereTerm[%d] (%p) priority=%d",
+ pWC->nTerm-j, pTerm, iLoop));
+ }
+#endif
+ sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL);
+ if( skipLikeAddr ) sqlite3VdbeJumpHere(v, skipLikeAddr);
+ pTerm->wtFlags |= TERM_CODED;
}
- sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL);
- if( skipLikeAddr ) sqlite3VdbeJumpHere(v, skipLikeAddr);
- pTerm->wtFlags |= TERM_CODED;
- }
+ iLoop = iNext;
+ }while( iLoop>0 );
/* Insert code to test for implied constraints based on transitivity
** of the "==" operator.
** the implied "t1.a=123" constraint.
*/
for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
- Expr *pE, *pEAlt;
+ Expr *pE, sEAlt;
WhereTerm *pAlt;
if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
if( (pTerm->eOperator & (WO_EQ|WO_IS))==0 ) continue;
WO_EQ|WO_IN|WO_IS, 0);
if( pAlt==0 ) continue;
if( pAlt->wtFlags & (TERM_CODED) ) continue;
+ if( (pAlt->eOperator & WO_IN)
+ && (pAlt->pExpr->flags & EP_xIsSelect)
+ && (pAlt->pExpr->x.pSelect->pEList->nExpr>1)
+ ){
+ continue;
+ }
testcase( pAlt->eOperator & WO_EQ );
testcase( pAlt->eOperator & WO_IS );
testcase( pAlt->eOperator & WO_IN );
VdbeModuleComment((v, "begin transitive constraint"));
- pEAlt = sqlite3StackAllocRaw(db, sizeof(*pEAlt));
- if( pEAlt ){
- *pEAlt = *pAlt->pExpr;
- pEAlt->pLeft = pE->pLeft;
- sqlite3ExprIfFalse(pParse, pEAlt, addrCont, SQLITE_JUMPIFNULL);
- sqlite3StackFree(db, pEAlt);
- }
+ sEAlt = *pAlt->pExpr;
+ sEAlt.pLeft = pE->pLeft;
+ sqlite3ExprIfFalse(pParse, &sEAlt, addrCont, SQLITE_JUMPIFNULL);
}
/* For a LEFT OUTER JOIN, generate code that will record the fact that
if( pWC->nTerm>=pWC->nSlot ){
WhereTerm *pOld = pWC->a;
sqlite3 *db = pWC->pWInfo->pParse->db;
- pWC->a = sqlite3DbMallocRaw(db, sizeof(pWC->a[0])*pWC->nSlot*2 );
+ pWC->a = sqlite3DbMallocRawNN(db, sizeof(pWC->a[0])*pWC->nSlot*2 );
if( pWC->a==0 ){
if( wtFlags & TERM_DYNAMIC ){
sqlite3ExprDelete(db, p);
sqlite3DbFree(db, pOld);
}
pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]);
- memset(&pWC->a[pWC->nTerm], 0, sizeof(pWC->a[0])*(pWC->nSlot-pWC->nTerm));
}
pTerm = &pWC->a[idx = pWC->nTerm++];
if( p && ExprHasProperty(p, EP_Unlikely) ){
pTerm->wtFlags = wtFlags;
pTerm->pWC = pWC;
pTerm->iParent = -1;
+ memset(&pTerm->eOperator, 0,
+ sizeof(WhereTerm) - offsetof(WhereTerm,eOperator));
return idx;
}
/*
** Return TRUE if the given operator is one of the operators that is
** allowed for an indexable WHERE clause term. The allowed operators are
-** "=", "<", ">", "<=", ">=", "IN", and "IS NULL"
+** "=", "<", ">", "<=", ">=", "IN", "IS", and "IS NULL"
*/
static int allowedOp(int op){
assert( TK_GT>TK_EQ && TK_GT<TK_GE );
int *pisComplete, /* True if the only wildcard is % in the last character */
int *pnoCase /* True if uppercase is equivalent to lowercase */
){
- const char *z = 0; /* String on RHS of LIKE operator */
+ const u8 *z = 0; /* String on RHS of LIKE operator */
Expr *pRight, *pLeft; /* Right and left size of LIKE operator */
ExprList *pList; /* List of operands to the LIKE operator */
int c; /* One character in z[] */
int cnt; /* Number of non-wildcard prefix characters */
- char wc[3]; /* Wildcard characters */
+ char wc[4]; /* Wildcard characters */
sqlite3 *db = pParse->db; /* Database connection */
sqlite3_value *pVal = 0;
int op; /* Opcode of pRight */
+ int rc; /* Result code to return */
if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, wc) ){
return 0;
#endif
pList = pExpr->x.pList;
pLeft = pList->a[1].pExpr;
- if( pLeft->op!=TK_COLUMN
- || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT
- || IsVirtual(pLeft->pTab) /* Value might be numeric */
- ){
- /* IMP: R-02065-49465 The left-hand side of the LIKE or GLOB operator must
- ** be the name of an indexed column with TEXT affinity. */
- return 0;
- }
- assert( pLeft->iColumn!=(-1) ); /* Because IPK never has AFF_TEXT */
pRight = sqlite3ExprSkipCollate(pList->a[0].pExpr);
op = pRight->op;
- if( op==TK_VARIABLE ){
+ if( op==TK_VARIABLE && (db->flags & SQLITE_EnableQPSG)==0 ){
Vdbe *pReprepare = pParse->pReprepare;
int iCol = pRight->iColumn;
pVal = sqlite3VdbeGetBoundValue(pReprepare, iCol, SQLITE_AFF_BLOB);
if( pVal && sqlite3_value_type(pVal)==SQLITE_TEXT ){
- z = (char *)sqlite3_value_text(pVal);
+ z = sqlite3_value_text(pVal);
}
sqlite3VdbeSetVarmask(pParse->pVdbe, iCol);
assert( pRight->op==TK_VARIABLE || pRight->op==TK_REGISTER );
}else if( op==TK_STRING ){
- z = pRight->u.zToken;
+ z = (u8*)pRight->u.zToken;
}
if( z ){
+
+ /* If the RHS begins with a digit or a minus sign, then the LHS must
+ ** be an ordinary column (not a virtual table column) with TEXT affinity.
+ ** Otherwise the LHS might be numeric and "lhs >= rhs" would be false
+ ** even though "lhs LIKE rhs" is true. But if the RHS does not start
+ ** with a digit or '-', then "lhs LIKE rhs" will always be false if
+ ** the LHS is numeric and so the optimization still works.
+ */
+ if( sqlite3Isdigit(z[0]) || z[0]=='-' ){
+ if( pLeft->op!=TK_COLUMN
+ || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT
+ || IsVirtual(pLeft->pTab) /* Value might be numeric */
+ ){
+ sqlite3ValueFree(pVal);
+ return 0;
+ }
+ }
+
+ /* Count the number of prefix characters prior to the first wildcard */
cnt = 0;
while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){
cnt++;
+ if( c==wc[3] && z[cnt]!=0 ) cnt++;
}
+
+ /* The optimization is possible only if (1) the pattern does not begin
+ ** with a wildcard and if (2) the non-wildcard prefix does not end with
+ ** an (illegal 0xff) character. The second condition is necessary so
+ ** that we can increment the prefix key to find an upper bound for the
+ ** range search.
+ */
if( cnt!=0 && 255!=(u8)z[cnt-1] ){
Expr *pPrefix;
+
+ /* A "complete" match if the pattern ends with "*" or "%" */
*pisComplete = c==wc[0] && z[cnt+1]==0;
- pPrefix = sqlite3Expr(db, TK_STRING, z);
- if( pPrefix ) pPrefix->u.zToken[cnt] = 0;
+
+ /* Get the pattern prefix. Remove all escapes from the prefix. */
+ pPrefix = sqlite3Expr(db, TK_STRING, (char*)z);
+ if( pPrefix ){
+ int iFrom, iTo;
+ char *zNew = pPrefix->u.zToken;
+ zNew[cnt] = 0;
+ for(iFrom=iTo=0; iFrom<cnt; iFrom++){
+ if( zNew[iFrom]==wc[3] ) iFrom++;
+ zNew[iTo++] = zNew[iFrom];
+ }
+ zNew[iTo] = 0;
+ }
*ppPrefix = pPrefix;
+
+ /* If the RHS pattern is a bound parameter, make arrangements to
+ ** reprepare the statement when that parameter is rebound */
if( op==TK_VARIABLE ){
Vdbe *v = pParse->pVdbe;
sqlite3VdbeSetVarmask(v, pRight->iColumn);
}
}
+ rc = (z!=0);
sqlite3ValueFree(pVal);
- return (z!=0);
+ return rc;
}
#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */
#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
-** Check to see if the given expression is of the form
-**
-** column MATCH expr
-**
-** If it is then return TRUE. If not, return FALSE.
-*/
-static int isMatchOfColumn(
- Expr *pExpr /* Test this expression */
-){
- ExprList *pList;
+** Check to see if the pExpr expression is a form that needs to be passed
+** to the xBestIndex method of virtual tables. Forms of interest include:
+**
+** Expression Virtual Table Operator
+** ----------------------- ---------------------------------
+** 1. column MATCH expr SQLITE_INDEX_CONSTRAINT_MATCH
+** 2. column GLOB expr SQLITE_INDEX_CONSTRAINT_GLOB
+** 3. column LIKE expr SQLITE_INDEX_CONSTRAINT_LIKE
+** 4. column REGEXP expr SQLITE_INDEX_CONSTRAINT_REGEXP
+** 5. column != expr SQLITE_INDEX_CONSTRAINT_NE
+** 6. expr != column SQLITE_INDEX_CONSTRAINT_NE
+** 7. column IS NOT expr SQLITE_INDEX_CONSTRAINT_ISNOT
+** 8. expr IS NOT column SQLITE_INDEX_CONSTRAINT_ISNOT
+** 9. column IS NOT NULL SQLITE_INDEX_CONSTRAINT_ISNOTNULL
+**
+** In every case, "column" must be a column of a virtual table. If there
+** is a match, set *ppLeft to the "column" expression, set *ppRight to the
+** "expr" expression (even though in forms (6) and (8) the column is on the
+** right and the expression is on the left). Also set *peOp2 to the
+** appropriate virtual table operator. The return value is 1 or 2 if there
+** is a match. The usual return is 1, but if the RHS is also a column
+** of virtual table in forms (5) or (7) then return 2.
+**
+** If the expression matches none of the patterns above, return 0.
+*/
+static int isAuxiliaryVtabOperator(
+ Expr *pExpr, /* Test this expression */
+ unsigned char *peOp2, /* OUT: 0 for MATCH, or else an op2 value */
+ Expr **ppLeft, /* Column expression to left of MATCH/op2 */
+ Expr **ppRight /* Expression to left of MATCH/op2 */
+){
+ if( pExpr->op==TK_FUNCTION ){
+ static const struct Op2 {
+ const char *zOp;
+ unsigned char eOp2;
+ } aOp[] = {
+ { "match", SQLITE_INDEX_CONSTRAINT_MATCH },
+ { "glob", SQLITE_INDEX_CONSTRAINT_GLOB },
+ { "like", SQLITE_INDEX_CONSTRAINT_LIKE },
+ { "regexp", SQLITE_INDEX_CONSTRAINT_REGEXP }
+ };
+ ExprList *pList;
+ Expr *pCol; /* Column reference */
+ int i;
- if( pExpr->op!=TK_FUNCTION ){
- return 0;
- }
- if( sqlite3StrICmp(pExpr->u.zToken,"match")!=0 ){
- return 0;
- }
- pList = pExpr->x.pList;
- if( pList->nExpr!=2 ){
- return 0;
- }
- if( pList->a[1].pExpr->op != TK_COLUMN ){
- return 0;
+ pList = pExpr->x.pList;
+ if( pList==0 || pList->nExpr!=2 ){
+ return 0;
+ }
+ pCol = pList->a[1].pExpr;
+ if( pCol->op!=TK_COLUMN || !IsVirtual(pCol->pTab) ){
+ return 0;
+ }
+ for(i=0; i<ArraySize(aOp); i++){
+ if( sqlite3StrICmp(pExpr->u.zToken, aOp[i].zOp)==0 ){
+ *peOp2 = aOp[i].eOp2;
+ *ppRight = pList->a[0].pExpr;
+ *ppLeft = pCol;
+ return 1;
+ }
+ }
+ }else if( pExpr->op==TK_NE || pExpr->op==TK_ISNOT || pExpr->op==TK_NOTNULL ){
+ int res = 0;
+ Expr *pLeft = pExpr->pLeft;
+ Expr *pRight = pExpr->pRight;
+ if( pLeft->op==TK_COLUMN && IsVirtual(pLeft->pTab) ){
+ res++;
+ }
+ if( pRight && pRight->op==TK_COLUMN && IsVirtual(pRight->pTab) ){
+ res++;
+ SWAP(Expr*, pLeft, pRight);
+ }
+ *ppLeft = pLeft;
+ *ppRight = pRight;
+ if( pExpr->op==TK_NE ) *peOp2 = SQLITE_INDEX_CONSTRAINT_NE;
+ if( pExpr->op==TK_ISNOT ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOT;
+ if( pExpr->op==TK_NOTNULL ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOTNULL;
+ return res;
}
- return 1;
+ return 0;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
&& (eOp & (WO_EQ|WO_GT|WO_GE))!=eOp ) return;
assert( pOne->pExpr->pLeft!=0 && pOne->pExpr->pRight!=0 );
assert( pTwo->pExpr->pLeft!=0 && pTwo->pExpr->pRight!=0 );
- if( sqlite3ExprCompare(pOne->pExpr->pLeft, pTwo->pExpr->pLeft, -1) ) return;
- if( sqlite3ExprCompare(pOne->pExpr->pRight, pTwo->pExpr->pRight, -1) )return;
+ if( sqlite3ExprCompare(0,pOne->pExpr->pLeft, pTwo->pExpr->pLeft, -1) ) return;
+ if( sqlite3ExprCompare(0,pOne->pExpr->pRight, pTwo->pExpr->pRight,-1) )return;
/* If we reach this point, it means the two subterms can be combined */
if( (eOp & (eOp-1))!=0 ){
if( eOp & (WO_LT|WO_LE) ){
if( pOrInfo==0 ) return;
pTerm->wtFlags |= TERM_ORINFO;
pOrWc = &pOrInfo->wc;
+ memset(pOrWc->aStatic, 0, sizeof(pOrWc->aStatic));
sqlite3WhereClauseInit(pOrWc, pWInfo);
sqlite3WhereSplit(pOrWc, pExpr, TK_OR);
sqlite3WhereExprAnalyze(pSrc, pOrWc);
WhereAndInfo *pAndInfo;
assert( (pOrTerm->wtFlags & (TERM_ANDINFO|TERM_ORINFO))==0 );
chngToIN = 0;
- pAndInfo = sqlite3DbMallocRaw(db, sizeof(*pAndInfo));
+ pAndInfo = sqlite3DbMallocRawNN(db, sizeof(*pAndInfo));
if( pAndInfo ){
WhereClause *pAndWC;
WhereTerm *pAndTerm;
pOrTerm->wtFlags |= TERM_ANDINFO;
pOrTerm->eOperator = WO_AND;
pAndWC = &pAndInfo->wc;
+ memset(pAndWC->aStatic, 0, sizeof(pAndWC->aStatic));
sqlite3WhereClauseInit(pAndWC, pWC->pWInfo);
sqlite3WhereSplit(pAndWC, pOrTerm->pExpr, TK_AND);
sqlite3WhereExprAnalyze(pSrc, pAndWC);
pAndWC->pOuter = pWC;
- testcase( db->mallocFailed );
if( !db->mallocFailed ){
for(j=0, pAndTerm=pAndWC->a; j<pAndWC->nTerm; j++, pAndTerm++){
assert( pAndTerm->pExpr );
- if( allowedOp(pAndTerm->pExpr->op) ){
+ if( allowedOp(pAndTerm->pExpr->op)
+ || pAndTerm->eOperator==WO_AUX
+ ){
b |= sqlite3WhereGetMask(&pWInfo->sMaskSet, pAndTerm->leftCursor);
}
}
}
assert( pLeft!=0 );
pDup = sqlite3ExprDup(db, pLeft, 0);
- pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0, 0);
+ pNew = sqlite3PExpr(pParse, TK_IN, pDup, 0);
if( pNew ){
int idxNew;
transferJoinMarkings(pNew, pExpr);
static int termIsEquivalence(Parse *pParse, Expr *pExpr){
char aff1, aff2;
CollSeq *pColl;
- const char *zColl1, *zColl2;
if( !OptimizationEnabled(pParse->db, SQLITE_Transitive) ) return 0;
if( pExpr->op!=TK_EQ && pExpr->op!=TK_IS ) return 0;
if( ExprHasProperty(pExpr, EP_FromJoin) ) return 0;
}
pColl = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft, pExpr->pRight);
if( pColl==0 || sqlite3StrICmp(pColl->zName, "BINARY")==0 ) return 1;
- pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft);
- /* Since pLeft and pRight are both a column references, their collating
- ** sequence should always be defined. */
- zColl1 = ALWAYS(pColl) ? pColl->zName : 0;
- pColl = sqlite3ExprCollSeq(pParse, pExpr->pRight);
- zColl2 = ALWAYS(pColl) ? pColl->zName : 0;
- return sqlite3StrICmp(zColl1, zColl2)==0;
+ return sqlite3ExprCollSeqMatch(pParse, pExpr->pLeft, pExpr->pRight);
}
/*
for(i=0; i<pSrc->nSrc; i++){
mask |= exprSelectUsage(pMaskSet, pSrc->a[i].pSelect);
mask |= sqlite3WhereExprUsage(pMaskSet, pSrc->a[i].pOn);
+ if( pSrc->a[i].fg.isTabFunc ){
+ mask |= sqlite3WhereExprListUsage(pMaskSet, pSrc->a[i].u1.pFuncArg);
+ }
}
}
pS = pS->pPrior;
** Expression pExpr is one operand of a comparison operator that might
** be useful for indexing. This routine checks to see if pExpr appears
** in any index. Return TRUE (1) if pExpr is an indexed term and return
-** FALSE (0) if not. If TRUE is returned, also set *piCur to the cursor
-** number of the table that is indexed and *piColumn to the column number
-** of the column that is indexed, or -2 if an expression is being indexed.
+** FALSE (0) if not. If TRUE is returned, also set aiCurCol[0] to the cursor
+** number of the table that is indexed and aiCurCol[1] to the column number
+** of the column that is indexed, or XN_EXPR (-2) if an expression is being
+** indexed.
**
** If pExpr is a TK_COLUMN column reference, then this routine always returns
** true even if that particular column is not indexed, because the column
** might be added to an automatic index later.
*/
-static int exprMightBeIndexed(
+static SQLITE_NOINLINE int exprMightBeIndexed2(
SrcList *pFrom, /* The FROM clause */
Bitmask mPrereq, /* Bitmask of FROM clause terms referenced by pExpr */
- Expr *pExpr, /* An operand of a comparison operator */
- int *piCur, /* Write the referenced table cursor number here */
- int *piColumn /* Write the referenced table column number here */
+ int *aiCurCol, /* Write the referenced table cursor and column here */
+ Expr *pExpr /* An operand of a comparison operator */
){
Index *pIdx;
int i;
int iCur;
- if( pExpr->op==TK_COLUMN ){
- *piCur = pExpr->iTable;
- *piColumn = pExpr->iColumn;
- return 1;
- }
- if( mPrereq==0 ) return 0; /* No table references */
- if( (mPrereq&(mPrereq-1))!=0 ) return 0; /* Refs more than one table */
for(i=0; mPrereq>1; i++, mPrereq>>=1){}
iCur = pFrom->a[i].iCursor;
for(pIdx=pFrom->a[i].pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->aColExpr==0 ) continue;
for(i=0; i<pIdx->nKeyCol; i++){
- if( pIdx->aiColumn[i]!=(-2) ) continue;
- if( sqlite3ExprCompare(pExpr, pIdx->aColExpr->a[i].pExpr, iCur)==0 ){
- *piCur = iCur;
- *piColumn = -2;
+ if( pIdx->aiColumn[i]!=XN_EXPR ) continue;
+ if( sqlite3ExprCompareSkip(pExpr, pIdx->aColExpr->a[i].pExpr, iCur)==0 ){
+ aiCurCol[0] = iCur;
+ aiCurCol[1] = XN_EXPR;
return 1;
}
}
}
return 0;
}
+static int exprMightBeIndexed(
+ SrcList *pFrom, /* The FROM clause */
+ Bitmask mPrereq, /* Bitmask of FROM clause terms referenced by pExpr */
+ int *aiCurCol, /* Write the referenced table cursor & column here */
+ Expr *pExpr, /* An operand of a comparison operator */
+ int op /* The specific comparison operator */
+){
+ /* If this expression is a vector to the left or right of a
+ ** inequality constraint (>, <, >= or <=), perform the processing
+ ** on the first element of the vector. */
+ assert( TK_GT+1==TK_LE && TK_GT+2==TK_LT && TK_GT+3==TK_GE );
+ assert( TK_IS<TK_GE && TK_ISNULL<TK_GE && TK_IN<TK_GE );
+ assert( op<=TK_GE );
+ if( pExpr->op==TK_VECTOR && (op>=TK_GT && ALWAYS(op<=TK_GE)) ){
+ pExpr = pExpr->x.pList->a[0].pExpr;
+ }
+
+ if( pExpr->op==TK_COLUMN ){
+ aiCurCol[0] = pExpr->iTable;
+ aiCurCol[1] = pExpr->iColumn;
+ return 1;
+ }
+ if( mPrereq==0 ) return 0; /* No table references */
+ if( (mPrereq&(mPrereq-1))!=0 ) return 0; /* Refs more than one table */
+ return exprMightBeIndexed2(pFrom,mPrereq,aiCurCol,pExpr);
+}
/*
** The input to this routine is an WhereTerm structure with only the
int op; /* Top-level operator. pExpr->op */
Parse *pParse = pWInfo->pParse; /* Parsing context */
sqlite3 *db = pParse->db; /* Database connection */
+ unsigned char eOp2 = 0; /* op2 value for LIKE/REGEXP/GLOB */
+ int nLeft; /* Number of elements on left side vector */
if( db->mallocFailed ){
return;
op = pExpr->op;
if( op==TK_IN ){
assert( pExpr->pRight==0 );
+ if( sqlite3ExprCheckIN(pParse, pExpr) ) return;
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
pTerm->prereqRight = exprSelectUsage(pMaskSet, pExpr->x.pSelect);
}else{
}else{
pTerm->prereqRight = sqlite3WhereExprUsage(pMaskSet, pExpr->pRight);
}
+ pMaskSet->bVarSelect = 0;
prereqAll = sqlite3WhereExprUsage(pMaskSet, pExpr);
+ if( pMaskSet->bVarSelect ) pTerm->wtFlags |= TERM_VARSELECT;
if( ExprHasProperty(pExpr, EP_FromJoin) ){
Bitmask x = sqlite3WhereGetMask(pMaskSet, pExpr->iRightJoinTable);
prereqAll |= x;
extraRight = x-1; /* ON clause terms may not be used with an index
** on left table of a LEFT JOIN. Ticket #3015 */
+ if( (prereqAll>>1)>=x ){
+ sqlite3ErrorMsg(pParse, "ON clause references tables to its right");
+ return;
+ }
}
pTerm->prereqAll = prereqAll;
pTerm->leftCursor = -1;
pTerm->iParent = -1;
pTerm->eOperator = 0;
if( allowedOp(op) ){
- int iCur, iColumn;
+ int aiCurCol[2];
Expr *pLeft = sqlite3ExprSkipCollate(pExpr->pLeft);
Expr *pRight = sqlite3ExprSkipCollate(pExpr->pRight);
u16 opMask = (pTerm->prereqRight & prereqLeft)==0 ? WO_ALL : WO_EQUIV;
- if( exprMightBeIndexed(pSrc, prereqLeft, pLeft, &iCur, &iColumn) ){
- pTerm->leftCursor = iCur;
- pTerm->u.leftColumn = iColumn;
+
+ if( pTerm->iField>0 ){
+ assert( op==TK_IN );
+ assert( pLeft->op==TK_VECTOR );
+ pLeft = pLeft->x.pList->a[pTerm->iField-1].pExpr;
+ }
+
+ if( exprMightBeIndexed(pSrc, prereqLeft, aiCurCol, pLeft, op) ){
+ pTerm->leftCursor = aiCurCol[0];
+ pTerm->u.leftColumn = aiCurCol[1];
pTerm->eOperator = operatorMask(op) & opMask;
}
if( op==TK_IS ) pTerm->wtFlags |= TERM_IS;
if( pRight
- && exprMightBeIndexed(pSrc, pTerm->prereqRight, pRight, &iCur, &iColumn)
+ && exprMightBeIndexed(pSrc, pTerm->prereqRight, aiCurCol, pRight, op)
){
WhereTerm *pNew;
Expr *pDup;
u16 eExtraOp = 0; /* Extra bits for pNew->eOperator */
+ assert( pTerm->iField==0 );
if( pTerm->leftCursor>=0 ){
int idxNew;
pDup = sqlite3ExprDup(db, pExpr, 0);
pNew = pTerm;
}
exprCommute(pParse, pDup);
- pNew->leftCursor = iCur;
- pNew->u.leftColumn = iColumn;
+ pNew->leftCursor = aiCurCol[0];
+ pNew->u.leftColumn = aiCurCol[1];
testcase( (prereqLeft | extraRight) != prereqLeft );
pNew->prereqRight = prereqLeft | extraRight;
pNew->prereqAll = prereqAll;
int idxNew;
pNewExpr = sqlite3PExpr(pParse, ops[i],
sqlite3ExprDup(db, pExpr->pLeft, 0),
- sqlite3ExprDup(db, pList->a[i].pExpr, 0), 0);
+ sqlite3ExprDup(db, pList->a[i].pExpr, 0));
transferJoinMarkings(pNewExpr, pExpr);
idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC);
testcase( idxNew==0 );
pNewExpr1 = sqlite3ExprDup(db, pLeft, 0);
pNewExpr1 = sqlite3PExpr(pParse, TK_GE,
sqlite3ExprAddCollateString(pParse,pNewExpr1,zCollSeqName),
- pStr1, 0);
+ pStr1);
transferJoinMarkings(pNewExpr1, pExpr);
idxNew1 = whereClauseInsert(pWC, pNewExpr1, wtFlags);
testcase( idxNew1==0 );
pNewExpr2 = sqlite3ExprDup(db, pLeft, 0);
pNewExpr2 = sqlite3PExpr(pParse, TK_LT,
sqlite3ExprAddCollateString(pParse,pNewExpr2,zCollSeqName),
- pStr2, 0);
+ pStr2);
transferJoinMarkings(pNewExpr2, pExpr);
idxNew2 = whereClauseInsert(pWC, pNewExpr2, wtFlags);
testcase( idxNew2==0 );
#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */
#ifndef SQLITE_OMIT_VIRTUALTABLE
- /* Add a WO_MATCH auxiliary term to the constraint set if the
- ** current expression is of the form: column MATCH expr.
+ /* Add a WO_AUX auxiliary term to the constraint set if the
+ ** current expression is of the form "column OP expr" where OP
+ ** is an operator that gets passed into virtual tables but which is
+ ** not normally optimized for ordinary tables. In other words, OP
+ ** is one of MATCH, LIKE, GLOB, REGEXP, !=, IS, IS NOT, or NOT NULL.
** This information is used by the xBestIndex methods of
** virtual tables. The native query optimizer does not attempt
** to do anything with MATCH functions.
*/
- if( isMatchOfColumn(pExpr) ){
- int idxNew;
- Expr *pRight, *pLeft;
- WhereTerm *pNewTerm;
- Bitmask prereqColumn, prereqExpr;
+ if( pWC->op==TK_AND ){
+ Expr *pRight = 0, *pLeft = 0;
+ int res = isAuxiliaryVtabOperator(pExpr, &eOp2, &pLeft, &pRight);
+ while( res-- > 0 ){
+ int idxNew;
+ WhereTerm *pNewTerm;
+ Bitmask prereqColumn, prereqExpr;
+
+ prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight);
+ prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft);
+ if( (prereqExpr & prereqColumn)==0 ){
+ Expr *pNewExpr;
+ pNewExpr = sqlite3PExpr(pParse, TK_MATCH,
+ 0, sqlite3ExprDup(db, pRight, 0));
+ if( ExprHasProperty(pExpr, EP_FromJoin) && pNewExpr ){
+ ExprSetProperty(pNewExpr, EP_FromJoin);
+ }
+ idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC);
+ testcase( idxNew==0 );
+ pNewTerm = &pWC->a[idxNew];
+ pNewTerm->prereqRight = prereqExpr;
+ pNewTerm->leftCursor = pLeft->iTable;
+ pNewTerm->u.leftColumn = pLeft->iColumn;
+ pNewTerm->eOperator = WO_AUX;
+ pNewTerm->eMatchOp = eOp2;
+ markTermAsChild(pWC, idxNew, idxTerm);
+ pTerm = &pWC->a[idxTerm];
+ pTerm->wtFlags |= TERM_COPIED;
+ pNewTerm->prereqAll = pTerm->prereqAll;
+ }
+ SWAP(Expr*, pLeft, pRight);
+ }
+ }
+#endif /* SQLITE_OMIT_VIRTUALTABLE */
- pRight = pExpr->x.pList->a[0].pExpr;
- pLeft = pExpr->x.pList->a[1].pExpr;
- prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight);
- prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft);
- if( (prereqExpr & prereqColumn)==0 ){
- Expr *pNewExpr;
- pNewExpr = sqlite3PExpr(pParse, TK_MATCH,
- 0, sqlite3ExprDup(db, pRight, 0), 0);
- idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC);
- testcase( idxNew==0 );
- pNewTerm = &pWC->a[idxNew];
- pNewTerm->prereqRight = prereqExpr;
- pNewTerm->leftCursor = pLeft->iTable;
- pNewTerm->u.leftColumn = pLeft->iColumn;
- pNewTerm->eOperator = WO_MATCH;
+ /* If there is a vector == or IS term - e.g. "(a, b) == (?, ?)" - create
+ ** new terms for each component comparison - "a = ?" and "b = ?". The
+ ** new terms completely replace the original vector comparison, which is
+ ** no longer used.
+ **
+ ** This is only required if at least one side of the comparison operation
+ ** is not a sub-select. */
+ if( pWC->op==TK_AND
+ && (pExpr->op==TK_EQ || pExpr->op==TK_IS)
+ && (nLeft = sqlite3ExprVectorSize(pExpr->pLeft))>1
+ && sqlite3ExprVectorSize(pExpr->pRight)==nLeft
+ && ( (pExpr->pLeft->flags & EP_xIsSelect)==0
+ || (pExpr->pRight->flags & EP_xIsSelect)==0)
+ ){
+ int i;
+ for(i=0; i<nLeft; i++){
+ int idxNew;
+ Expr *pNew;
+ Expr *pLeft = sqlite3ExprForVectorField(pParse, pExpr->pLeft, i);
+ Expr *pRight = sqlite3ExprForVectorField(pParse, pExpr->pRight, i);
+
+ pNew = sqlite3PExpr(pParse, pExpr->op, pLeft, pRight);
+ transferJoinMarkings(pNew, pExpr);
+ idxNew = whereClauseInsert(pWC, pNew, TERM_DYNAMIC);
+ exprAnalyze(pSrc, pWC, idxNew);
+ }
+ pTerm = &pWC->a[idxTerm];
+ pTerm->wtFlags |= TERM_CODED|TERM_VIRTUAL; /* Disable the original */
+ pTerm->eOperator = 0;
+ }
+
+ /* If there is a vector IN term - e.g. "(a, b) IN (SELECT ...)" - create
+ ** a virtual term for each vector component. The expression object
+ ** used by each such virtual term is pExpr (the full vector IN(...)
+ ** expression). The WhereTerm.iField variable identifies the index within
+ ** the vector on the LHS that the virtual term represents.
+ **
+ ** This only works if the RHS is a simple SELECT, not a compound
+ */
+ if( pWC->op==TK_AND && pExpr->op==TK_IN && pTerm->iField==0
+ && pExpr->pLeft->op==TK_VECTOR
+ && pExpr->x.pSelect->pPrior==0
+ ){
+ int i;
+ for(i=0; i<sqlite3ExprVectorSize(pExpr->pLeft); i++){
+ int idxNew;
+ idxNew = whereClauseInsert(pWC, pExpr, TERM_VIRTUAL);
+ pWC->a[idxNew].iField = i+1;
+ exprAnalyze(pSrc, pWC, idxNew);
markTermAsChild(pWC, idxNew, idxTerm);
- pTerm = &pWC->a[idxTerm];
- pTerm->wtFlags |= TERM_COPIED;
- pNewTerm->prereqAll = pTerm->prereqAll;
}
}
-#endif /* SQLITE_OMIT_VIRTUALTABLE */
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
/* When sqlite_stat3 histogram data is available an operator of the
pNewExpr = sqlite3PExpr(pParse, TK_GT,
sqlite3ExprDup(db, pLeft, 0),
- sqlite3PExpr(pParse, TK_NULL, 0, 0, 0), 0);
+ sqlite3ExprAlloc(db, TK_NULL, 0, 0));
idxNew = whereClauseInsert(pWC, pNewExpr,
TERM_VIRTUAL|TERM_DYNAMIC|TERM_VNULL);
/* Prevent ON clause terms of a LEFT JOIN from being used to drive
** an index for tables to the left of the join.
*/
+ testcase( pTerm!=&pWC->a[idxTerm] );
+ pTerm = &pWC->a[idxTerm];
pTerm->prereqRight |= extraRight;
}
/*
** Deallocate a WhereClause structure. The WhereClause structure
-** itself is not freed. This routine is the inverse of sqlite3WhereClauseInit().
+** itself is not freed. This routine is the inverse of
+** sqlite3WhereClauseInit().
*/
SQLITE_PRIVATE void sqlite3WhereClauseClear(WhereClause *pWC){
int i;
** tree.
*/
SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){
- Bitmask mask = 0;
+ Bitmask mask;
if( p==0 ) return 0;
if( p->op==TK_COLUMN ){
- mask = sqlite3WhereGetMask(pMaskSet, p->iTable);
- return mask;
- }
- mask = sqlite3WhereExprUsage(pMaskSet, p->pRight);
- mask |= sqlite3WhereExprUsage(pMaskSet, p->pLeft);
- if( ExprHasProperty(p, EP_xIsSelect) ){
+ return sqlite3WhereGetMask(pMaskSet, p->iTable);
+ }
+ mask = (p->op==TK_IF_NULL_ROW) ? sqlite3WhereGetMask(pMaskSet, p->iTable) : 0;
+ assert( !ExprHasProperty(p, EP_TokenOnly) );
+ if( p->pLeft ) mask |= sqlite3WhereExprUsage(pMaskSet, p->pLeft);
+ if( p->pRight ){
+ mask |= sqlite3WhereExprUsage(pMaskSet, p->pRight);
+ assert( p->x.pList==0 );
+ }else if( ExprHasProperty(p, EP_xIsSelect) ){
+ if( ExprHasProperty(p, EP_VarSelect) ) pMaskSet->bVarSelect = 1;
mask |= exprSelectUsage(pMaskSet, p->x.pSelect);
- }else{
+ }else if( p->x.pList ){
mask |= sqlite3WhereExprListUsage(pMaskSet, p->x.pList);
}
return mask;
pTab = pItem->pTab;
assert( pTab!=0 );
pArgs = pItem->u1.pFuncArg;
- assert( pArgs!=0 );
+ if( pArgs==0 ) return;
for(j=k=0; j<pArgs->nExpr; j++){
- while( k<pTab->nCol && (pTab->aCol[k].colFlags & COLFLAG_HIDDEN)==0 ){ k++; }
+ while( k<pTab->nCol && (pTab->aCol[k].colFlags & COLFLAG_HIDDEN)==0 ){k++;}
if( k>=pTab->nCol ){
sqlite3ErrorMsg(pParse, "too many arguments on %s() - max %d",
pTab->zName, j);
return;
}
- pColRef = sqlite3PExpr(pParse, TK_COLUMN, 0, 0, 0);
+ pColRef = sqlite3ExprAlloc(pParse->db, TK_COLUMN, 0, 0);
if( pColRef==0 ) return;
pColRef->iTable = pItem->iCursor;
pColRef->iColumn = k++;
pColRef->pTab = pTab;
pTerm = sqlite3PExpr(pParse, TK_EQ, pColRef,
- sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0), 0);
+ sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0));
whereClauseInsert(pWC, pTerm, TERM_DYNAMIC);
}
}
/* #include "sqliteInt.h" */
/* #include "whereInt.h" */
+/*
+** Extra information appended to the end of sqlite3_index_info but not
+** visible to the xBestIndex function, at least not directly. The
+** sqlite3_vtab_collation() interface knows how to reach it, however.
+**
+** This object is not an API and can be changed from one release to the
+** next. As long as allocateIndexInfo() and sqlite3_vtab_collation()
+** agree on the structure, all will be well.
+*/
+typedef struct HiddenIndexInfo HiddenIndexInfo;
+struct HiddenIndexInfo {
+ WhereClause *pWC; /* The Where clause being analyzed */
+ Parse *pParse; /* The parsing context */
+};
+
/* Forward declaration of methods */
static int whereLoopResize(sqlite3*, WhereLoop*, int);
/*
** Return the estimated number of output rows from a WHERE clause
*/
-SQLITE_PRIVATE u64 sqlite3WhereOutputRowCount(WhereInfo *pWInfo){
- return sqlite3LogEstToInt(pWInfo->nRowOut);
+SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo *pWInfo){
+ return pWInfo->nRowOut;
}
/*
return pWInfo->nOBSat;
}
+/*
+** Return TRUE if the innermost loop of the WHERE clause implementation
+** returns rows in ORDER BY order for complete run of the inner loop.
+**
+** Across multiple iterations of outer loops, the output rows need not be
+** sorted. As long as rows are sorted for just the innermost loop, this
+** routine can return TRUE.
+*/
+SQLITE_PRIVATE int sqlite3WhereOrderedInnerLoop(WhereInfo *pWInfo){
+ return pWInfo->bOrderedInnerLoop;
+}
+
/*
** Return the VDBE address or label to jump to in order to continue
** immediately with the next row of a WHERE clause.
WhereTerm *pTerm; /* The term being tested */
int k = pScan->k; /* Where to start scanning */
- while( pScan->iEquiv<=pScan->nEquiv ){
- iCur = pScan->aiCur[pScan->iEquiv-1];
+ assert( pScan->iEquiv<=pScan->nEquiv );
+ pWC = pScan->pWC;
+ while(1){
iColumn = pScan->aiColumn[pScan->iEquiv-1];
- if( iColumn==XN_EXPR && pScan->pIdxExpr==0 ) return 0;
- while( (pWC = pScan->pWC)!=0 ){
+ iCur = pScan->aiCur[pScan->iEquiv-1];
+ assert( pWC!=0 );
+ do{
for(pTerm=pWC->a+k; k<pWC->nTerm; k++, pTerm++){
if( pTerm->leftCursor==iCur
&& pTerm->u.leftColumn==iColumn
&& (iColumn!=XN_EXPR
- || sqlite3ExprCompare(pTerm->pExpr->pLeft,pScan->pIdxExpr,iCur)==0)
+ || sqlite3ExprCompareSkip(pTerm->pExpr->pLeft,
+ pScan->pIdxExpr,iCur)==0)
&& (pScan->iEquiv<=1 || !ExprHasProperty(pTerm->pExpr, EP_FromJoin))
){
if( (pTerm->eOperator & WO_EQUIV)!=0
testcase( pTerm->eOperator & WO_IS );
continue;
}
+ pScan->pWC = pWC;
pScan->k = k+1;
return pTerm;
}
}
}
- pScan->pWC = pScan->pWC->pOuter;
+ pWC = pWC->pOuter;
k = 0;
- }
- pScan->pWC = pScan->pOrigWC;
+ }while( pWC!=0 );
+ if( pScan->iEquiv>=pScan->nEquiv ) break;
+ pWC = pScan->pOrigWC;
k = 0;
pScan->iEquiv++;
}
**
** The scanner will be searching the WHERE clause pWC. It will look
** for terms of the form "X <op> <expr>" where X is column iColumn of table
-** iCur. The <op> must be one of the operators described by opMask.
+** iCur. Or if pIdx!=0 then X is column iColumn of index pIdx. pIdx
+** must be one of the indexes of table iCur.
+**
+** The <op> must be one of the operators described by opMask.
**
** If the search is for X and the WHERE clause contains terms of the
** form X=Y then this routine might also return terms of the form
u32 opMask, /* Operator(s) to scan for */
Index *pIdx /* Must be compatible with this index */
){
- int j = 0;
-
- /* memset(pScan, 0, sizeof(*pScan)); */
pScan->pOrigWC = pWC;
pScan->pWC = pWC;
pScan->pIdxExpr = 0;
+ pScan->idxaff = 0;
+ pScan->zCollName = 0;
if( pIdx ){
- j = iColumn;
+ int j = iColumn;
iColumn = pIdx->aiColumn[j];
- if( iColumn==XN_EXPR ) pScan->pIdxExpr = pIdx->aColExpr->a[j].pExpr;
- }
- if( pIdx && iColumn>=0 ){
- pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity;
- pScan->zCollName = pIdx->azColl[j];
- }else{
- pScan->idxaff = 0;
- pScan->zCollName = 0;
+ if( iColumn==XN_EXPR ){
+ pScan->pIdxExpr = pIdx->aColExpr->a[j].pExpr;
+ pScan->zCollName = pIdx->azColl[j];
+ }else if( iColumn==pIdx->pTable->iPKey ){
+ iColumn = XN_ROWID;
+ }else if( iColumn>=0 ){
+ pScan->idxaff = pIdx->pTable->aCol[iColumn].affinity;
+ pScan->zCollName = pIdx->azColl[j];
+ }
+ }else if( iColumn==XN_EXPR ){
+ return 0;
}
pScan->opMask = opMask;
pScan->k = 0;
/*
** Search for a term in the WHERE clause that is of the form "X <op> <expr>"
-** where X is a reference to the iColumn of table iCur and <op> is one of
-** the WO_xx operator codes specified by the op parameter.
-** Return a pointer to the term. Return 0 if not found.
+** where X is a reference to the iColumn of table iCur or of index pIdx
+** if pIdx!=0 and <op> is one of the WO_xx operator codes specified by
+** the op parameter. Return a pointer to the term. Return 0 if not found.
**
-** If pIdx!=0 then search for terms matching the iColumn-th column of pIdx
+** If pIdx!=0 then it must be one of the indexes of table iCur.
+** Search for terms matching the iColumn-th column of pIdx
** rather than the iColumn-th column of table iCur.
**
** The term returned might by Y=<expr> if there is another constraint in
&& p->iColumn==pIdx->aiColumn[iCol]
&& p->iTable==iBase
){
- CollSeq *pColl = sqlite3ExprCollSeq(pParse, pList->a[i].pExpr);
- if( pColl && 0==sqlite3StrICmp(pColl->zName, zColl) ){
+ CollSeq *pColl = sqlite3ExprNNCollSeq(pParse, pList->a[i].pExpr);
+ if( 0==sqlite3StrICmp(pColl->zName, zColl) ){
return i;
}
}
** Convert OP_Column opcodes to OP_Copy in previously generated code.
**
** This routine runs over generated VDBE code and translates OP_Column
-** opcodes into OP_Copy, and OP_Rowid into OP_Null, when the table is being
-** accessed via co-routine instead of via table lookup.
+** opcodes into OP_Copy when the table is being accessed via co-routine
+** instead of via table lookup.
+**
+** If the bIncrRowid parameter is 0, then any OP_Rowid instructions on
+** cursor iTabCur are transformed into OP_Null. Or, if bIncrRowid is non-zero,
+** then each OP_Rowid is transformed into an instruction to increment the
+** value stored in its output register.
*/
static void translateColumnToCopy(
- Vdbe *v, /* The VDBE containing code to translate */
+ Parse *pParse, /* Parsing context */
int iStart, /* Translate from this opcode to the end */
int iTabCur, /* OP_Column/OP_Rowid references to this table */
- int iRegister /* The first column is in this register */
+ int iRegister, /* The first column is in this register */
+ int bIncrRowid /* If non-zero, transform OP_rowid to OP_AddImm(1) */
){
+ Vdbe *v = pParse->pVdbe;
VdbeOp *pOp = sqlite3VdbeGetOp(v, iStart);
int iEnd = sqlite3VdbeCurrentAddr(v);
+ if( pParse->db->mallocFailed ) return;
for(; iStart<iEnd; iStart++, pOp++){
if( pOp->p1!=iTabCur ) continue;
if( pOp->opcode==OP_Column ){
pOp->p2 = pOp->p3;
pOp->p3 = 0;
}else if( pOp->opcode==OP_Rowid ){
- pOp->opcode = OP_Null;
- pOp->p1 = 0;
- pOp->p3 = 0;
+ if( bIncrRowid ){
+ /* Increment the value stored in the P2 operand of the OP_Rowid. */
+ pOp->opcode = OP_AddImm;
+ pOp->p1 = pOp->p2;
+ pOp->p2 = 1;
+ }else{
+ pOp->opcode = OP_Null;
+ pOp->p1 = 0;
+ pOp->p3 = 0;
+ }
}
}
}
char aff;
if( pTerm->leftCursor!=pSrc->iCursor ) return 0;
if( (pTerm->eOperator & (WO_EQ|WO_IS))==0 ) return 0;
+ if( (pSrc->fg.jointype & JT_LEFT)
+ && !ExprHasProperty(pTerm->pExpr, EP_FromJoin)
+ && (pTerm->eOperator & WO_IS)
+ ){
+ /* Cannot use an IS term from the WHERE clause as an index driver for
+ ** the RHS of a LEFT JOIN. Such a term can only be used if it is from
+ ** the ON clause. */
+ return 0;
+ }
if( (pTerm->prereqRight & notReady)!=0 ) return 0;
if( pTerm->u.leftColumn<0 ) return 0;
aff = pSrc->pTab->aCol[pTerm->u.leftColumn].affinity;
Expr *pPartial = 0; /* Partial Index Expression */
int iContinue = 0; /* Jump here to skip excluded rows */
struct SrcList_item *pTabItem; /* FROM clause term being indexed */
+ int addrCounter = 0; /* Address where integer counter is initialized */
+ int regBase; /* Array of registers where record is assembled */
/* Generate code to skip over the creation and initialization of the
** transient index on 2nd and subsequent iterations of the loop. */
v = pParse->pVdbe;
assert( v!=0 );
- addrInit = sqlite3CodeOnce(pParse); VdbeCoverage(v);
+ addrInit = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
/* Count the number of columns that will be added to the index
** and used to match WHERE clause constraints */
idxCols |= cMask;
pIdx->aiColumn[n] = pTerm->u.leftColumn;
pColl = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pX->pRight);
- pIdx->azColl[n] = pColl ? pColl->zName : "BINARY";
+ pIdx->azColl[n] = pColl ? pColl->zName : sqlite3StrBINARY;
n++;
}
}
for(i=0; i<mxBitCol; i++){
if( extraCols & MASKBIT(i) ){
pIdx->aiColumn[n] = i;
- pIdx->azColl[n] = "BINARY";
+ pIdx->azColl[n] = sqlite3StrBINARY;
n++;
}
}
if( pSrc->colUsed & MASKBIT(BMS-1) ){
for(i=BMS-1; i<pTable->nCol; i++){
pIdx->aiColumn[n] = i;
- pIdx->azColl[n] = "BINARY";
+ pIdx->azColl[n] = sqlite3StrBINARY;
n++;
}
}
assert( n==nKeyCol );
pIdx->aiColumn[n] = XN_ROWID;
- pIdx->azColl[n] = "BINARY";
+ pIdx->azColl[n] = sqlite3StrBINARY;
/* Create the automatic index */
assert( pLevel->iIdxCur>=0 );
pTabItem = &pWC->pWInfo->pTabList->a[pLevel->iFrom];
if( pTabItem->fg.viaCoroutine ){
int regYield = pTabItem->regReturn;
+ addrCounter = sqlite3VdbeAddOp2(v, OP_Integer, 0, 0);
sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, pTabItem->addrFillSub);
addrTop = sqlite3VdbeAddOp1(v, OP_Yield, regYield);
VdbeCoverage(v);
pLoop->wsFlags |= WHERE_PARTIALIDX;
}
regRecord = sqlite3GetTempReg(pParse);
- sqlite3GenerateIndexKey(pParse, pIdx, pLevel->iTabCur, regRecord, 0, 0, 0, 0);
+ regBase = sqlite3GenerateIndexKey(
+ pParse, pIdx, pLevel->iTabCur, regRecord, 0, 0, 0, 0
+ );
sqlite3VdbeAddOp2(v, OP_IdxInsert, pLevel->iIdxCur, regRecord);
sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue);
if( pTabItem->fg.viaCoroutine ){
- translateColumnToCopy(v, addrTop, pLevel->iTabCur, pTabItem->regResult);
+ sqlite3VdbeChangeP2(v, addrCounter, regBase+n);
+ testcase( pParse->db->mallocFailed );
+ translateColumnToCopy(pParse, addrTop, pLevel->iTabCur,
+ pTabItem->regResult, 1);
sqlite3VdbeGoto(v, addrTop);
pTabItem->fg.viaCoroutine = 0;
}else{
** by passing the pointer returned by this function to sqlite3_free().
*/
static sqlite3_index_info *allocateIndexInfo(
- Parse *pParse,
- WhereClause *pWC,
+ Parse *pParse, /* The parsing context */
+ WhereClause *pWC, /* The WHERE clause being analyzed */
Bitmask mUnusable, /* Ignore terms with these prereqs */
- struct SrcList_item *pSrc,
- ExprList *pOrderBy
+ struct SrcList_item *pSrc, /* The FROM clause term that is the vtab */
+ ExprList *pOrderBy, /* The ORDER BY clause */
+ u16 *pmNoOmit /* Mask of terms not to omit */
){
int i, j;
int nTerm;
struct sqlite3_index_constraint *pIdxCons;
struct sqlite3_index_orderby *pIdxOrderBy;
struct sqlite3_index_constraint_usage *pUsage;
+ struct HiddenIndexInfo *pHidden;
WhereTerm *pTerm;
int nOrderBy;
sqlite3_index_info *pIdxInfo;
+ u16 mNoOmit = 0;
/* Count the number of possible WHERE clause constraints referring
** to this virtual table */
testcase( pTerm->eOperator & WO_ISNULL );
testcase( pTerm->eOperator & WO_IS );
testcase( pTerm->eOperator & WO_ALL );
- if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue;
+ if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue;
if( pTerm->wtFlags & TERM_VNULL ) continue;
assert( pTerm->u.leftColumn>=(-1) );
nTerm++;
*/
pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo)
+ (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm
- + sizeof(*pIdxOrderBy)*nOrderBy );
+ + sizeof(*pIdxOrderBy)*nOrderBy + sizeof(*pHidden) );
if( pIdxInfo==0 ){
sqlite3ErrorMsg(pParse, "out of memory");
return 0;
** changing them. We have to do some funky casting in order to
** initialize those fields.
*/
- pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1];
+ pHidden = (struct HiddenIndexInfo*)&pIdxInfo[1];
+ pIdxCons = (struct sqlite3_index_constraint*)&pHidden[1];
pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm];
pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy];
*(int*)&pIdxInfo->nConstraint = nTerm;
*(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage =
pUsage;
+ pHidden->pWC = pWC;
+ pHidden->pParse = pParse;
for(i=j=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){
- u8 op;
+ u16 op;
if( pTerm->leftCursor != pSrc->iCursor ) continue;
if( pTerm->prereqRight & mUnusable ) continue;
assert( IsPowerOfTwo(pTerm->eOperator & ~WO_EQUIV) );
testcase( pTerm->eOperator & WO_IS );
testcase( pTerm->eOperator & WO_ISNULL );
testcase( pTerm->eOperator & WO_ALL );
- if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue;
+ if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue;
if( pTerm->wtFlags & TERM_VNULL ) continue;
assert( pTerm->u.leftColumn>=(-1) );
pIdxCons[j].iColumn = pTerm->u.leftColumn;
pIdxCons[j].iTermOffset = i;
- op = (u8)pTerm->eOperator & WO_ALL;
+ op = pTerm->eOperator & WO_ALL;
if( op==WO_IN ) op = WO_EQ;
- pIdxCons[j].op = op;
- /* The direct assignment in the previous line is possible only because
- ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The
- ** following asserts verify this fact. */
- assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ );
- assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT );
- assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE );
- assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT );
- assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE );
- assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH );
- assert( pTerm->eOperator & (WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) );
+ if( op==WO_AUX ){
+ pIdxCons[j].op = pTerm->eMatchOp;
+ }else if( op & (WO_ISNULL|WO_IS) ){
+ if( op==WO_ISNULL ){
+ pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_ISNULL;
+ }else{
+ pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_IS;
+ }
+ }else{
+ pIdxCons[j].op = (u8)op;
+ /* The direct assignment in the previous line is possible only because
+ ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The
+ ** following asserts verify this fact. */
+ assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ );
+ assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT );
+ assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE );
+ assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT );
+ assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE );
+ assert( pTerm->eOperator&(WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_AUX) );
+
+ if( op & (WO_LT|WO_LE|WO_GT|WO_GE)
+ && sqlite3ExprIsVector(pTerm->pExpr->pRight)
+ ){
+ if( i<16 ) mNoOmit |= (1 << i);
+ if( op==WO_LT ) pIdxCons[j].op = WO_LE;
+ if( op==WO_GT ) pIdxCons[j].op = WO_GE;
+ }
+ }
+
j++;
}
for(i=0; i<nOrderBy; i++){
pIdxOrderBy[i].desc = pOrderBy->a[i].sortOrder;
}
+ *pmNoOmit = mNoOmit;
return pIdxInfo;
}
*/
static int vtabBestIndex(Parse *pParse, Table *pTab, sqlite3_index_info *p){
sqlite3_vtab *pVtab = sqlite3GetVTable(pParse->db, pTab)->pVtab;
- int i;
int rc;
TRACE_IDX_INPUTS(p);
if( rc!=SQLITE_OK ){
if( rc==SQLITE_NOMEM ){
- pParse->db->mallocFailed = 1;
+ sqlite3OomFault(pParse->db);
}else if( !pVtab->zErrMsg ){
sqlite3ErrorMsg(pParse, "%s", sqlite3ErrStr(rc));
}else{
sqlite3_free(pVtab->zErrMsg);
pVtab->zErrMsg = 0;
+#if 0
+ /* This error is now caught by the caller.
+ ** Search for "xBestIndex malfunction" below */
for(i=0; i<p->nConstraint; i++){
if( !p->aConstraint[i].usable && p->aConstraintUsage[i].argvIndex>0 ){
sqlite3ErrorMsg(pParse,
"table %s: xBestIndex returned an invalid plan", pTab->zName);
}
}
+#endif
return pParse->nErr;
}
iGap = iGap/3;
}
aStat[0] = iLower + iGap;
- aStat[1] = pIdx->aAvgEq[iCol];
+ aStat[1] = pIdx->aAvgEq[nField-1];
}
/* Restore the pRec->nField value before returning. */
/*
** Return the affinity for a single column of an index.
*/
-static char sqlite3IndexColumnAffinity(sqlite3 *db, Index *pIdx, int iCol){
+SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3 *db, Index *pIdx, int iCol){
assert( iCol>=0 && iCol<pIdx->nColumn );
if( !pIdx->zColAff ){
if( sqlite3IndexAffinityStr(db, pIdx)==0 ) return SQLITE_AFF_BLOB;
if( nEq==pBuilder->nRecValid ){
UnpackedRecord *pRec = pBuilder->pRec;
tRowcnt a[2];
- u8 aff;
+ int nBtm = pLoop->u.btree.nBtm;
+ int nTop = pLoop->u.btree.nTop;
/* Variable iLower will be set to the estimate of the number of rows in
** the index that are less than the lower bound of the range query. The
testcase( pRec->nField!=pBuilder->nRecValid );
pRec->nField = pBuilder->nRecValid;
}
- aff = sqlite3IndexColumnAffinity(pParse->db, p, nEq);
- assert( nEq!=p->nKeyCol || aff==SQLITE_AFF_INTEGER );
/* Determine iLower and iUpper using ($P) only. */
if( nEq==0 ){
iLower = 0;
if( p->aSortOrder[nEq] ){
/* The roles of pLower and pUpper are swapped for a DESC index */
SWAP(WhereTerm*, pLower, pUpper);
+ SWAP(int, nBtm, nTop);
}
/* If possible, improve on the iLower estimate using ($P:$L). */
if( pLower ){
- int bOk; /* True if value is extracted from pExpr */
+ int n; /* Values extracted from pExpr */
Expr *pExpr = pLower->pExpr->pRight;
- rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
- if( rc==SQLITE_OK && bOk ){
+ rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, nBtm, nEq, &n);
+ if( rc==SQLITE_OK && n ){
tRowcnt iNew;
+ u16 mask = WO_GT|WO_LE;
+ if( sqlite3ExprVectorSize(pExpr)>n ) mask = (WO_LE|WO_LT);
iLwrIdx = whereKeyStats(pParse, p, pRec, 0, a);
- iNew = a[0] + ((pLower->eOperator & (WO_GT|WO_LE)) ? a[1] : 0);
+ iNew = a[0] + ((pLower->eOperator & mask) ? a[1] : 0);
if( iNew>iLower ) iLower = iNew;
nOut--;
pLower = 0;
/* If possible, improve on the iUpper estimate using ($P:$U). */
if( pUpper ){
- int bOk; /* True if value is extracted from pExpr */
+ int n; /* Values extracted from pExpr */
Expr *pExpr = pUpper->pExpr->pRight;
- rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq, &bOk);
- if( rc==SQLITE_OK && bOk ){
+ rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, nTop, nEq, &n);
+ if( rc==SQLITE_OK && n ){
tRowcnt iNew;
+ u16 mask = WO_GT|WO_LE;
+ if( sqlite3ExprVectorSize(pExpr)>n ) mask = (WO_LE|WO_LT);
iUprIdx = whereKeyStats(pParse, p, pRec, 1, a);
- iNew = a[0] + ((pUpper->eOperator & (WO_GT|WO_LE)) ? a[1] : 0);
+ iNew = a[0] + ((pUpper->eOperator & mask) ? a[1] : 0);
if( iNew<iUpper ) iUpper = iNew;
nOut--;
pUpper = 0;
Index *p = pBuilder->pNew->u.btree.pIndex;
int nEq = pBuilder->pNew->u.btree.nEq;
UnpackedRecord *pRec = pBuilder->pRec;
- u8 aff; /* Column affinity */
int rc; /* Subfunction return code */
tRowcnt a[2]; /* Statistics */
int bOk;
return SQLITE_OK;
}
- aff = sqlite3IndexColumnAffinity(pParse->db, p, nEq-1);
- rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, aff, nEq-1, &bOk);
+ rc = sqlite3Stat4ProbeSetValue(pParse, p, &pRec, pExpr, 1, nEq-1, &bOk);
pBuilder->pRec = pRec;
if( rc!=SQLITE_OK ) return rc;
if( bOk==0 ) return SQLITE_NOTFOUND;
pBuilder->nRecValid = nEq;
whereKeyStats(pParse, p, pRec, 0, a);
- WHERETRACE(0x10,("equality scan regions: %d\n", (int)a[1]));
+ WHERETRACE(0x10,("equality scan regions %s(%d): %d\n",
+ p->zName, nEq-1, (int)a[1]));
*pnRow = a[1];
return rc;
sqlite3DebugPrintf("TERM-%-3d NULL\n", iTerm);
}else{
char zType[4];
+ char zLeft[50];
memcpy(zType, "...", 4);
if( pTerm->wtFlags & TERM_VIRTUAL ) zType[0] = 'V';
if( pTerm->eOperator & WO_EQUIV ) zType[1] = 'E';
if( ExprHasProperty(pTerm->pExpr, EP_FromJoin) ) zType[2] = 'L';
+ if( pTerm->eOperator & WO_SINGLE ){
+ sqlite3_snprintf(sizeof(zLeft),zLeft,"left={%d:%d}",
+ pTerm->leftCursor, pTerm->u.leftColumn);
+ }else if( (pTerm->eOperator & WO_OR)!=0 && pTerm->u.pOrInfo!=0 ){
+ sqlite3_snprintf(sizeof(zLeft),zLeft,"indexable=0x%lld",
+ pTerm->u.pOrInfo->indexable);
+ }else{
+ sqlite3_snprintf(sizeof(zLeft),zLeft,"left=%d", pTerm->leftCursor);
+ }
sqlite3DebugPrintf(
- "TERM-%-3d %p %s cursor=%-3d prob=%-3d op=0x%03x wtFlags=0x%04x\n",
- iTerm, pTerm, zType, pTerm->leftCursor, pTerm->truthProb,
+ "TERM-%-3d %p %s %-12s prob=%-3d op=0x%03x wtFlags=0x%04x",
+ iTerm, pTerm, zType, zLeft, pTerm->truthProb,
pTerm->eOperator, pTerm->wtFlags);
+ if( pTerm->iField ){
+ sqlite3DebugPrintf(" iField=%d\n", pTerm->iField);
+ }else{
+ sqlite3DebugPrintf("\n");
+ }
sqlite3TreeViewExpr(0, pTerm->pExpr, 0);
}
}
#endif
+#ifdef WHERETRACE_ENABLED
+/*
+** Show the complete content of a WhereClause
+*/
+SQLITE_PRIVATE void sqlite3WhereClausePrint(WhereClause *pWC){
+ int i;
+ for(i=0; i<pWC->nTerm; i++){
+ whereTermPrint(&pWC->a[i], i);
+ }
+}
+#endif
+
#ifdef WHERETRACE_ENABLED
/*
** Print a WhereLoop object for debugging purposes
*/
static void whereLoopPrint(WhereLoop *p, WhereClause *pWC){
WhereInfo *pWInfo = pWC->pWInfo;
- int nb = 1+(pWInfo->pTabList->nSrc+7)/8;
+ int nb = 1+(pWInfo->pTabList->nSrc+3)/4;
struct SrcList_item *pItem = pWInfo->pTabList->a + p->iTab;
Table *pTab = pItem->pTab;
+ Bitmask mAll = (((Bitmask)1)<<(nb*4)) - 1;
sqlite3DebugPrintf("%c%2d.%0*llx.%0*llx", p->cId,
- p->iTab, nb, p->maskSelf, nb, p->prereq);
+ p->iTab, nb, p->maskSelf, nb, p->prereq & mAll);
sqlite3DebugPrintf(" %12s",
pItem->zAlias ? pItem->zAlias : pTab->zName);
if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){
p->u.vtab.idxStr = 0;
}else if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 && p->u.btree.pIndex!=0 ){
sqlite3DbFree(db, p->u.btree.pIndex->zColAff);
- sqlite3DbFree(db, p->u.btree.pIndex);
+ sqlite3DbFreeNN(db, p->u.btree.pIndex);
p->u.btree.pIndex = 0;
}
}
** Deallocate internal memory used by a WhereLoop object
*/
static void whereLoopClear(sqlite3 *db, WhereLoop *p){
- if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm);
+ if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFreeNN(db, p->aLTerm);
whereLoopClearUnion(db, p);
whereLoopInit(p);
}
WhereTerm **paNew;
if( p->nLSlot>=n ) return SQLITE_OK;
n = (n+7)&~7;
- paNew = sqlite3DbMallocRaw(db, sizeof(p->aLTerm[0])*n);
- if( paNew==0 ) return SQLITE_NOMEM;
+ paNew = sqlite3DbMallocRawNN(db, sizeof(p->aLTerm[0])*n);
+ if( paNew==0 ) return SQLITE_NOMEM_BKPT;
memcpy(paNew, p->aLTerm, sizeof(p->aLTerm[0])*p->nLSlot);
- if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm);
+ if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFreeNN(db, p->aLTerm);
p->aLTerm = paNew;
p->nLSlot = n;
return SQLITE_OK;
whereLoopClearUnion(db, pTo);
if( whereLoopResize(db, pTo, pFrom->nLTerm) ){
memset(&pTo->u, 0, sizeof(pTo->u));
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
memcpy(pTo, pFrom, WHERE_LOOP_XFER_SZ);
memcpy(pTo->aLTerm, pFrom->aLTerm, pTo->nLTerm*sizeof(pTo->aLTerm[0]));
*/
static void whereLoopDelete(sqlite3 *db, WhereLoop *p){
whereLoopClear(db, p);
- sqlite3DbFree(db, p);
+ sqlite3DbFreeNN(db, p);
}
/*
** Free a WhereInfo structure
*/
static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){
- if( ALWAYS(pWInfo) ){
- int i;
- for(i=0; i<pWInfo->nLevel; i++){
- WhereLevel *pLevel = &pWInfo->a[i];
- if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){
- sqlite3DbFree(db, pLevel->u.in.aInLoop);
- }
- }
- sqlite3WhereClauseClear(&pWInfo->sWC);
- while( pWInfo->pLoops ){
- WhereLoop *p = pWInfo->pLoops;
- pWInfo->pLoops = p->pNextLoop;
- whereLoopDelete(db, p);
+ int i;
+ assert( pWInfo!=0 );
+ for(i=0; i<pWInfo->nLevel; i++){
+ WhereLevel *pLevel = &pWInfo->a[i];
+ if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){
+ sqlite3DbFree(db, pLevel->u.in.aInLoop);
}
- sqlite3DbFree(db, pWInfo);
}
+ sqlite3WhereClauseClear(&pWInfo->sWC);
+ while( pWInfo->pLoops ){
+ WhereLoop *p = pWInfo->pLoops;
+ pWInfo->pLoops = p->pNextLoop;
+ whereLoopDelete(db, p);
+ }
+ sqlite3DbFreeNN(db, pWInfo);
}
/*
** Return TRUE if all of the following are true:
**
** (1) X has the same or lower cost that Y
-** (2) X is a proper subset of Y
-** (3) X skips at least as many columns as Y
-**
-** By "proper subset" we mean that X uses fewer WHERE clause terms
-** than Y and that every WHERE clause term used by X is also used
-** by Y.
+** (2) X uses fewer WHERE clause terms than Y
+** (3) Every WHERE clause term used by X is also used by Y
+** (4) X skips at least as many columns as Y
+** (5) If X is a covering index, than Y is too
**
+** Conditions (2) and (3) mean that X is a "proper subset" of Y.
** If X is a proper subset of Y then Y is a better choice and ought
** to have a lower cost. This routine returns TRUE when that cost
-** relationship is inverted and needs to be adjusted. The third rule
+** relationship is inverted and needs to be adjusted. Constraint (4)
** was added because if X uses skip-scan less than Y it still might
-** deserve a lower cost even if it is a proper subset of Y.
+** deserve a lower cost even if it is a proper subset of Y. Constraint (5)
+** was added because a covering index probably deserves to have a lower cost
+** than a non-covering index even if it is a proper subset.
*/
static int whereLoopCheaperProperSubset(
const WhereLoop *pX, /* First WhereLoop to compare */
}
if( j<0 ) return 0; /* X not a subset of Y since term X[i] not used by Y */
}
+ if( (pX->wsFlags&WHERE_IDX_ONLY)!=0
+ && (pY->wsFlags&WHERE_IDX_ONLY)==0 ){
+ return 0; /* Constraint (5) */
+ }
return 1; /* All conditions meet */
}
/*
** Search the list of WhereLoops in *ppPrev looking for one that can be
-** supplanted by pTemplate.
+** replaced by pTemplate.
**
-** Return NULL if the WhereLoop list contains an entry that can supplant
-** pTemplate, in other words if pTemplate does not belong on the list.
+** Return NULL if pTemplate does not belong on the WhereLoop list.
+** In other words if pTemplate ought to be dropped from further consideration.
**
-** If pX is a WhereLoop that pTemplate can supplant, then return the
+** If pX is a WhereLoop that pTemplate can replace, then return the
** link that points to pX.
**
-** If pTemplate cannot supplant any existing element of the list but needs
-** to be added to the list, then return a pointer to the tail of the list.
+** If pTemplate cannot replace any existing element of the list but needs
+** to be added to the list as a new entry, then return a pointer to the
+** tail of the list.
*/
static WhereLoop **whereLoopFindLesser(
WhereLoop **ppPrev,
WhereLoop **ppPrev, *p;
WhereInfo *pWInfo = pBuilder->pWInfo;
sqlite3 *db = pWInfo->pParse->db;
+ int rc;
/* If pBuilder->pOrSet is defined, then only keep track of the costs
** and prereqs.
if( p!=0 ){
sqlite3DebugPrintf("replace: ");
whereLoopPrint(p, pBuilder->pWC);
+ sqlite3DebugPrintf(" with: ");
+ }else{
+ sqlite3DebugPrintf(" add: ");
}
- sqlite3DebugPrintf(" add: ");
whereLoopPrint(pTemplate, pBuilder->pWC);
}
#endif
if( p==0 ){
/* Allocate a new WhereLoop to add to the end of the list */
- *ppPrev = p = sqlite3DbMallocRaw(db, sizeof(WhereLoop));
- if( p==0 ) return SQLITE_NOMEM;
+ *ppPrev = p = sqlite3DbMallocRawNN(db, sizeof(WhereLoop));
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
whereLoopInit(p);
p->pNextLoop = 0;
}else{
whereLoopDelete(db, pToDel);
}
}
- whereLoopXfer(db, p, pTemplate);
+ rc = whereLoopXfer(db, p, pTemplate);
if( (p->wsFlags & WHERE_VIRTUALTABLE)==0 ){
Index *pIndex = p->u.btree.pIndex;
if( pIndex && pIndex->tnum==0 ){
p->u.btree.pIndex = 0;
}
}
- return SQLITE_OK;
+ return rc;
}
/*
if( pLoop->nOut > nRow-iReduce ) pLoop->nOut = nRow - iReduce;
}
+/*
+** Term pTerm is a vector range comparison operation. The first comparison
+** in the vector can be optimized using column nEq of the index. This
+** function returns the total number of vector elements that can be used
+** as part of the range comparison.
+**
+** For example, if the query is:
+**
+** WHERE a = ? AND (b, c, d) > (?, ?, ?)
+**
+** and the index:
+**
+** CREATE INDEX ... ON (a, b, c, d, e)
+**
+** then this function would be invoked with nEq=1. The value returned in
+** this case is 3.
+*/
+static int whereRangeVectorLen(
+ Parse *pParse, /* Parsing context */
+ int iCur, /* Cursor open on pIdx */
+ Index *pIdx, /* The index to be used for a inequality constraint */
+ int nEq, /* Number of prior equality constraints on same index */
+ WhereTerm *pTerm /* The vector inequality constraint */
+){
+ int nCmp = sqlite3ExprVectorSize(pTerm->pExpr->pLeft);
+ int i;
+
+ nCmp = MIN(nCmp, (pIdx->nColumn - nEq));
+ for(i=1; i<nCmp; i++){
+ /* Test if comparison i of pTerm is compatible with column (i+nEq)
+ ** of the index. If not, exit the loop. */
+ char aff; /* Comparison affinity */
+ char idxaff = 0; /* Indexed columns affinity */
+ CollSeq *pColl; /* Comparison collation sequence */
+ Expr *pLhs = pTerm->pExpr->pLeft->x.pList->a[i].pExpr;
+ Expr *pRhs = pTerm->pExpr->pRight;
+ if( pRhs->flags & EP_xIsSelect ){
+ pRhs = pRhs->x.pSelect->pEList->a[i].pExpr;
+ }else{
+ pRhs = pRhs->x.pList->a[i].pExpr;
+ }
+
+ /* Check that the LHS of the comparison is a column reference to
+ ** the right column of the right source table. And that the sort
+ ** order of the index column is the same as the sort order of the
+ ** leftmost index column. */
+ if( pLhs->op!=TK_COLUMN
+ || pLhs->iTable!=iCur
+ || pLhs->iColumn!=pIdx->aiColumn[i+nEq]
+ || pIdx->aSortOrder[i+nEq]!=pIdx->aSortOrder[nEq]
+ ){
+ break;
+ }
+
+ testcase( pLhs->iColumn==XN_ROWID );
+ aff = sqlite3CompareAffinity(pRhs, sqlite3ExprAffinity(pLhs));
+ idxaff = sqlite3TableColumnAffinity(pIdx->pTable, pLhs->iColumn);
+ if( aff!=idxaff ) break;
+
+ pColl = sqlite3BinaryCompareCollSeq(pParse, pLhs, pRhs);
+ if( pColl==0 ) break;
+ if( sqlite3StrICmp(pColl->zName, pIdx->azColl[i+nEq]) ) break;
+ }
+ return i;
+}
+
/*
** Adjust the cost C by the costMult facter T. This only occurs if
** compiled with -DSQLITE_ENABLE_COSTMULT
Bitmask saved_prereq; /* Original value of pNew->prereq */
u16 saved_nLTerm; /* Original value of pNew->nLTerm */
u16 saved_nEq; /* Original value of pNew->u.btree.nEq */
+ u16 saved_nBtm; /* Original value of pNew->u.btree.nBtm */
+ u16 saved_nTop; /* Original value of pNew->u.btree.nTop */
u16 saved_nSkip; /* Original value of pNew->nSkip */
u32 saved_wsFlags; /* Original value of pNew->wsFlags */
LogEst saved_nOut; /* Original value of pNew->nOut */
WhereTerm *pTop = 0, *pBtm = 0; /* Top and bottom range constraints */
pNew = pBuilder->pNew;
- if( db->mallocFailed ) return SQLITE_NOMEM;
+ if( db->mallocFailed ) return SQLITE_NOMEM_BKPT;
+ WHERETRACE(0x800, ("BEGIN addBtreeIdx(%s), nEq=%d\n",
+ pProbe->zName, pNew->u.btree.nEq));
assert( (pNew->wsFlags & WHERE_VIRTUALTABLE)==0 );
assert( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 );
if( pNew->wsFlags & WHERE_BTM_LIMIT ){
opMask = WO_LT|WO_LE;
- }else if( /*pProbe->tnum<=0 ||*/ (pSrc->fg.jointype & JT_LEFT)!=0 ){
- opMask = WO_EQ|WO_IN|WO_GT|WO_GE|WO_LT|WO_LE;
}else{
+ assert( pNew->u.btree.nBtm==0 );
opMask = WO_EQ|WO_IN|WO_GT|WO_GE|WO_LT|WO_LE|WO_ISNULL|WO_IS;
}
if( pProbe->bUnordered ) opMask &= ~(WO_GT|WO_GE|WO_LT|WO_LE);
assert( pNew->u.btree.nEq<pProbe->nColumn );
saved_nEq = pNew->u.btree.nEq;
+ saved_nBtm = pNew->u.btree.nBtm;
+ saved_nTop = pNew->u.btree.nTop;
saved_nSkip = pNew->nSkip;
saved_nLTerm = pNew->nLTerm;
saved_wsFlags = pNew->wsFlags;
** to mix with a lower range bound from some other source */
if( pTerm->wtFlags & TERM_LIKEOPT && pTerm->eOperator==WO_LT ) continue;
+ /* Do not allow IS constraints from the WHERE clause to be used by the
+ ** right table of a LEFT JOIN. Only constraints in the ON clause are
+ ** allowed */
+ if( (pSrc->fg.jointype & JT_LEFT)!=0
+ && !ExprHasProperty(pTerm->pExpr, EP_FromJoin)
+ && (eOp & (WO_IS|WO_ISNULL))!=0
+ ){
+ testcase( eOp & WO_IS );
+ testcase( eOp & WO_ISNULL );
+ continue;
+ }
+
+ if( IsUniqueIndex(pProbe) && saved_nEq==pProbe->nKeyCol-1 ){
+ pBuilder->bldFlags |= SQLITE_BLDF_UNIQUE;
+ }else{
+ pBuilder->bldFlags |= SQLITE_BLDF_INDEXED;
+ }
pNew->wsFlags = saved_wsFlags;
pNew->u.btree.nEq = saved_nEq;
+ pNew->u.btree.nBtm = saved_nBtm;
+ pNew->u.btree.nTop = saved_nTop;
pNew->nLTerm = saved_nLTerm;
if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */
pNew->aLTerm[pNew->nLTerm++] = pTerm;
pNew->wsFlags |= WHERE_COLUMN_IN;
if( ExprHasProperty(pExpr, EP_xIsSelect) ){
/* "x IN (SELECT ...)": TUNING: the SELECT returns 25 rows */
+ int i;
nIn = 46; assert( 46==sqlite3LogEst(25) );
+
+ /* The expression may actually be of the form (x, y) IN (SELECT...).
+ ** In this case there is a separate term for each of (x) and (y).
+ ** However, the nIn multiplier should only be applied once, not once
+ ** for each such term. The following loop checks that pTerm is the
+ ** first such term in use, and sets nIn back to 0 if it is not. */
+ for(i=0; i<pNew->nLTerm-1; i++){
+ if( pNew->aLTerm[i] && pNew->aLTerm[i]->pExpr==pExpr ) nIn = 0;
+ }
}else if( ALWAYS(pExpr->x.pList && pExpr->x.pList->nExpr) ){
/* "x IN (value, value, ...)" */
nIn = sqlite3LogEst(pExpr->x.pList->nExpr);
+ assert( nIn>0 ); /* RHS always has 2 or more terms... The parser
+ ** changes "x IN (?)" into "x=?". */
}
- assert( nIn>0 ); /* RHS always has 2 or more terms... The parser
- ** changes "x IN (?)" into "x=?". */
-
}else if( eOp & (WO_EQ|WO_IS) ){
int iCol = pProbe->aiColumn[saved_nEq];
pNew->wsFlags |= WHERE_COLUMN_EQ;
assert( saved_nEq==pNew->u.btree.nEq );
if( iCol==XN_ROWID
- || (iCol>0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1)
+ || (iCol>=0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1)
){
- if( iCol>=0 && pProbe->uniqNotNull==0 ){
- pNew->wsFlags |= WHERE_UNQ_WANTED;
- }else{
+ if( iCol==XN_ROWID || pProbe->uniqNotNull
+ || (pProbe->nKeyCol==1 && pProbe->onError && eOp==WO_EQ)
+ ){
pNew->wsFlags |= WHERE_ONEROW;
+ }else{
+ pNew->wsFlags |= WHERE_UNQ_WANTED;
}
}
}else if( eOp & WO_ISNULL ){
testcase( eOp & WO_GT );
testcase( eOp & WO_GE );
pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_BTM_LIMIT;
+ pNew->u.btree.nBtm = whereRangeVectorLen(
+ pParse, pSrc->iCursor, pProbe, saved_nEq, pTerm
+ );
pBtm = pTerm;
pTop = 0;
if( pTerm->wtFlags & TERM_LIKEOPT ){
if( whereLoopResize(db, pNew, pNew->nLTerm+1) ) break; /* OOM */
pNew->aLTerm[pNew->nLTerm++] = pTop;
pNew->wsFlags |= WHERE_TOP_LIMIT;
+ pNew->u.btree.nTop = 1;
}
}else{
assert( eOp & (WO_LT|WO_LE) );
testcase( eOp & WO_LT );
testcase( eOp & WO_LE );
pNew->wsFlags |= WHERE_COLUMN_RANGE|WHERE_TOP_LIMIT;
+ pNew->u.btree.nTop = whereRangeVectorLen(
+ pParse, pSrc->iCursor, pProbe, saved_nEq, pTerm
+ );
pTop = pTerm;
pBtm = (pNew->wsFlags & WHERE_BTM_LIMIT)!=0 ?
pNew->aLTerm[pNew->nLTerm-2] : 0;
}
pNew->prereq = saved_prereq;
pNew->u.btree.nEq = saved_nEq;
+ pNew->u.btree.nBtm = saved_nBtm;
+ pNew->u.btree.nTop = saved_nTop;
pNew->nSkip = saved_nSkip;
pNew->wsFlags = saved_wsFlags;
pNew->nOut = saved_nOut;
pNew->wsFlags = saved_wsFlags;
}
+ WHERETRACE(0x800, ("END addBtreeIdx(%s), nEq=%d, rc=%d\n",
+ pProbe->zName, saved_nEq, rc));
return rc;
}
}else if( (aColExpr = pIndex->aColExpr)!=0 ){
for(jj=0; jj<pIndex->nKeyCol; jj++){
if( pIndex->aiColumn[jj]!=XN_EXPR ) continue;
- if( sqlite3ExprCompare(pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){
+ if( sqlite3ExprCompareSkip(pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){
return 1;
}
}
static int whereUsablePartialIndex(int iTab, WhereClause *pWC, Expr *pWhere){
int i;
WhereTerm *pTerm;
+ Parse *pParse = pWC->pWInfo->pParse;
while( pWhere->op==TK_AND ){
if( !whereUsablePartialIndex(iTab,pWC,pWhere->pLeft) ) return 0;
pWhere = pWhere->pRight;
}
+ if( pParse->db->flags & SQLITE_EnableQPSG ) pParse = 0;
for(i=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){
Expr *pExpr = pTerm->pExpr;
- if( sqlite3ExprImpliesExpr(pExpr, pWhere, iTab)
- && (!ExprHasProperty(pExpr, EP_FromJoin) || pExpr->iRightJoinTable==iTab)
+ if( (!ExprHasProperty(pExpr, EP_FromJoin) || pExpr->iRightJoinTable==iTab)
+ && sqlite3ExprImpliesExpr(pParse, pExpr, pWhere, iTab)
){
return 1;
}
/*
** Add all WhereLoop objects for a single table of the join where the table
-** is idenfied by pBuilder->pNew->iTab. That table is guaranteed to be
+** is identified by pBuilder->pNew->iTab. That table is guaranteed to be
** a b-tree table, not a virtual table.
**
** The costs (WhereLoop.rRun) of the b-tree loops added by this function
*/
static int whereLoopAddBtree(
WhereLoopBuilder *pBuilder, /* WHERE clause information */
- Bitmask mExtra /* Extra prerequesites for using this table */
+ Bitmask mPrereq /* Extra prerequesites for using this table */
){
WhereInfo *pWInfo; /* WHERE analysis context */
Index *pProbe; /* An index we are evaluating */
#ifndef SQLITE_OMIT_AUTOMATIC_INDEX
/* Automatic indexes */
if( !pBuilder->pOrSet /* Not part of an OR optimization */
- && (pWInfo->wctrlFlags & WHERE_NO_AUTOINDEX)==0
+ && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)==0
&& (pWInfo->pParse->db->flags & SQLITE_AutoIndex)!=0
&& pSrc->pIBIndex==0 /* Has no INDEXED BY clause */
&& !pSrc->fg.notIndexed /* Has no NOT INDEXED clause */
pNew->rSetup += 24;
}
ApplyCostMultiplier(pNew->rSetup, pTab->costMult);
+ if( pNew->rSetup<0 ) pNew->rSetup = 0;
/* TUNING: Each index lookup yields 20 rows in the table. This
** is more than the usual guess of 10 rows, since we have no way
** of knowing how selective the index will ultimately be. It would
pNew->nOut = 43; assert( 43==sqlite3LogEst(20) );
pNew->rRun = sqlite3LogEstAdd(rLogSize,pNew->nOut);
pNew->wsFlags = WHERE_AUTO_INDEX;
- pNew->prereq = mExtra | pTerm->prereqRight;
+ pNew->prereq = mPrereq | pTerm->prereqRight;
rc = whereLoopInsert(pBuilder, pNew);
}
}
}
#endif /* SQLITE_OMIT_AUTOMATIC_INDEX */
- /* Loop over all indices
- */
- for(; rc==SQLITE_OK && pProbe; pProbe=pProbe->pNext, iSortIdx++){
+ /* Loop over all indices. If there was an INDEXED BY clause, then only
+ ** consider index pProbe. */
+ for(; rc==SQLITE_OK && pProbe;
+ pProbe=(pSrc->pIBIndex ? 0 : pProbe->pNext), iSortIdx++
+ ){
if( pProbe->pPartIdxWhere!=0
&& !whereUsablePartialIndex(pSrc->iCursor, pWC, pProbe->pPartIdxWhere) ){
testcase( pNew->iTab!=pSrc->iCursor ); /* See ticket [98d973b8f5] */
continue; /* Partial index inappropriate for this query */
}
+ if( pProbe->bNoQuery ) continue;
rSize = pProbe->aiRowLogEst[0];
pNew->u.btree.nEq = 0;
+ pNew->u.btree.nBtm = 0;
+ pNew->u.btree.nTop = 0;
pNew->nSkip = 0;
pNew->nLTerm = 0;
pNew->iSortIdx = 0;
pNew->rSetup = 0;
- pNew->prereq = mExtra;
+ pNew->prereq = mPrereq;
pNew->nOut = rSize;
pNew->u.btree.pIndex = pProbe;
b = indexMightHelpWithOrderBy(pBuilder, pProbe, pSrc->iCursor);
/* Full scan via index */
if( b
|| !HasRowid(pTab)
+ || pProbe->pPartIdxWhere!=0
|| ( m==0
&& pProbe->bUnordered==0
&& (pProbe->szIdxRow<pTab->szTabRow)
/* The cost of visiting the index rows is N*K, where K is
** between 1.1 and 3.0, depending on the relative sizes of the
- ** index and table rows. If this is a non-covering index scan,
- ** also add the cost of visiting table rows (N*3.0). */
+ ** index and table rows. */
pNew->rRun = rSize + 1 + (15*pProbe->szIdxRow)/pTab->szTabRow;
if( m!=0 ){
- pNew->rRun = sqlite3LogEstAdd(pNew->rRun, rSize+16);
+ /* If this is a non-covering index scan, add in the cost of
+ ** doing table lookups. The cost will be 3x the number of
+ ** lookups. Take into account WHERE clause terms that can be
+ ** satisfied using just the index, and that do not require a
+ ** table lookup. */
+ LogEst nLookup = rSize + 16; /* Base cost: N*3 */
+ int ii;
+ int iCur = pSrc->iCursor;
+ WhereClause *pWC2 = &pWInfo->sWC;
+ for(ii=0; ii<pWC2->nTerm; ii++){
+ WhereTerm *pTerm = &pWC2->a[ii];
+ if( !sqlite3ExprCoveredByIndex(pTerm->pExpr, iCur, pProbe) ){
+ break;
+ }
+ /* pTerm can be evaluated using just the index. So reduce
+ ** the expected number of table lookups accordingly */
+ if( pTerm->truthProb<=0 ){
+ nLookup += pTerm->truthProb;
+ }else{
+ nLookup--;
+ if( pTerm->eOperator & (WO_EQ|WO_IS) ) nLookup -= 19;
+ }
+ }
+
+ pNew->rRun = sqlite3LogEstAdd(pNew->rRun, nLookup);
}
ApplyCostMultiplier(pNew->rRun, pTab->costMult);
whereLoopOutputAdjust(pWC, pNew, rSize);
}
}
+ pBuilder->bldFlags = 0;
rc = whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, 0);
+ if( pBuilder->bldFlags==SQLITE_BLDF_INDEXED ){
+ /* If a non-unique index is used, or if a prefix of the key for
+ ** unique index is used (making the index functionally non-unique)
+ ** then the sqlite_stat1 data becomes important for scoring the
+ ** plan */
+ pTab->tabFlags |= TF_StatsUsed;
+ }
#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
sqlite3Stat4ProbeFree(pBuilder->pRec);
pBuilder->nRecValid = 0;
pBuilder->pRec = 0;
#endif
-
- /* If there was an INDEXED BY clause, then only that one index is
- ** considered. */
- if( pSrc->pIBIndex ) break;
}
return rc;
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
+
+/*
+** Argument pIdxInfo is already populated with all constraints that may
+** be used by the virtual table identified by pBuilder->pNew->iTab. This
+** function marks a subset of those constraints usable, invokes the
+** xBestIndex method and adds the returned plan to pBuilder.
+**
+** A constraint is marked usable if:
+**
+** * Argument mUsable indicates that its prerequisites are available, and
+**
+** * It is not one of the operators specified in the mExclude mask passed
+** as the fourth argument (which in practice is either WO_IN or 0).
+**
+** Argument mPrereq is a mask of tables that must be scanned before the
+** virtual table in question. These are added to the plans prerequisites
+** before it is added to pBuilder.
+**
+** Output parameter *pbIn is set to true if the plan added to pBuilder
+** uses one or more WO_IN terms, or false otherwise.
+*/
+static int whereLoopAddVirtualOne(
+ WhereLoopBuilder *pBuilder,
+ Bitmask mPrereq, /* Mask of tables that must be used. */
+ Bitmask mUsable, /* Mask of usable tables */
+ u16 mExclude, /* Exclude terms using these operators */
+ sqlite3_index_info *pIdxInfo, /* Populated object for xBestIndex */
+ u16 mNoOmit, /* Do not omit these constraints */
+ int *pbIn /* OUT: True if plan uses an IN(...) op */
+){
+ WhereClause *pWC = pBuilder->pWC;
+ struct sqlite3_index_constraint *pIdxCons;
+ struct sqlite3_index_constraint_usage *pUsage = pIdxInfo->aConstraintUsage;
+ int i;
+ int mxTerm;
+ int rc = SQLITE_OK;
+ WhereLoop *pNew = pBuilder->pNew;
+ Parse *pParse = pBuilder->pWInfo->pParse;
+ struct SrcList_item *pSrc = &pBuilder->pWInfo->pTabList->a[pNew->iTab];
+ int nConstraint = pIdxInfo->nConstraint;
+
+ assert( (mUsable & mPrereq)==mPrereq );
+ *pbIn = 0;
+ pNew->prereq = mPrereq;
+
+ /* Set the usable flag on the subset of constraints identified by
+ ** arguments mUsable and mExclude. */
+ pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
+ for(i=0; i<nConstraint; i++, pIdxCons++){
+ WhereTerm *pTerm = &pWC->a[pIdxCons->iTermOffset];
+ pIdxCons->usable = 0;
+ if( (pTerm->prereqRight & mUsable)==pTerm->prereqRight
+ && (pTerm->eOperator & mExclude)==0
+ ){
+ pIdxCons->usable = 1;
+ }
+ }
+
+ /* Initialize the output fields of the sqlite3_index_info structure */
+ memset(pUsage, 0, sizeof(pUsage[0])*nConstraint);
+ assert( pIdxInfo->needToFreeIdxStr==0 );
+ pIdxInfo->idxStr = 0;
+ pIdxInfo->idxNum = 0;
+ pIdxInfo->orderByConsumed = 0;
+ pIdxInfo->estimatedCost = SQLITE_BIG_DBL / (double)2;
+ pIdxInfo->estimatedRows = 25;
+ pIdxInfo->idxFlags = 0;
+ pIdxInfo->colUsed = (sqlite3_int64)pSrc->colUsed;
+
+ /* Invoke the virtual table xBestIndex() method */
+ rc = vtabBestIndex(pParse, pSrc->pTab, pIdxInfo);
+ if( rc ) return rc;
+
+ mxTerm = -1;
+ assert( pNew->nLSlot>=nConstraint );
+ for(i=0; i<nConstraint; i++) pNew->aLTerm[i] = 0;
+ pNew->u.vtab.omitMask = 0;
+ pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
+ for(i=0; i<nConstraint; i++, pIdxCons++){
+ int iTerm;
+ if( (iTerm = pUsage[i].argvIndex - 1)>=0 ){
+ WhereTerm *pTerm;
+ int j = pIdxCons->iTermOffset;
+ if( iTerm>=nConstraint
+ || j<0
+ || j>=pWC->nTerm
+ || pNew->aLTerm[iTerm]!=0
+ || pIdxCons->usable==0
+ ){
+ rc = SQLITE_ERROR;
+ sqlite3ErrorMsg(pParse,"%s.xBestIndex malfunction",pSrc->pTab->zName);
+ return rc;
+ }
+ testcase( iTerm==nConstraint-1 );
+ testcase( j==0 );
+ testcase( j==pWC->nTerm-1 );
+ pTerm = &pWC->a[j];
+ pNew->prereq |= pTerm->prereqRight;
+ assert( iTerm<pNew->nLSlot );
+ pNew->aLTerm[iTerm] = pTerm;
+ if( iTerm>mxTerm ) mxTerm = iTerm;
+ testcase( iTerm==15 );
+ testcase( iTerm==16 );
+ if( iTerm<16 && pUsage[i].omit ) pNew->u.vtab.omitMask |= 1<<iTerm;
+ if( (pTerm->eOperator & WO_IN)!=0 ){
+ /* A virtual table that is constrained by an IN clause may not
+ ** consume the ORDER BY clause because (1) the order of IN terms
+ ** is not necessarily related to the order of output terms and
+ ** (2) Multiple outputs from a single IN value will not merge
+ ** together. */
+ pIdxInfo->orderByConsumed = 0;
+ pIdxInfo->idxFlags &= ~SQLITE_INDEX_SCAN_UNIQUE;
+ *pbIn = 1; assert( (mExclude & WO_IN)==0 );
+ }
+ }
+ }
+ pNew->u.vtab.omitMask &= ~mNoOmit;
+
+ pNew->nLTerm = mxTerm+1;
+ assert( pNew->nLTerm<=pNew->nLSlot );
+ pNew->u.vtab.idxNum = pIdxInfo->idxNum;
+ pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr;
+ pIdxInfo->needToFreeIdxStr = 0;
+ pNew->u.vtab.idxStr = pIdxInfo->idxStr;
+ pNew->u.vtab.isOrdered = (i8)(pIdxInfo->orderByConsumed ?
+ pIdxInfo->nOrderBy : 0);
+ pNew->rSetup = 0;
+ pNew->rRun = sqlite3LogEstFromDouble(pIdxInfo->estimatedCost);
+ pNew->nOut = sqlite3LogEst(pIdxInfo->estimatedRows);
+
+ /* Set the WHERE_ONEROW flag if the xBestIndex() method indicated
+ ** that the scan will visit at most one row. Clear it otherwise. */
+ if( pIdxInfo->idxFlags & SQLITE_INDEX_SCAN_UNIQUE ){
+ pNew->wsFlags |= WHERE_ONEROW;
+ }else{
+ pNew->wsFlags &= ~WHERE_ONEROW;
+ }
+ rc = whereLoopInsert(pBuilder, pNew);
+ if( pNew->u.vtab.needFree ){
+ sqlite3_free(pNew->u.vtab.idxStr);
+ pNew->u.vtab.needFree = 0;
+ }
+ WHERETRACE(0xffff, (" bIn=%d prereqIn=%04llx prereqOut=%04llx\n",
+ *pbIn, (sqlite3_uint64)mPrereq,
+ (sqlite3_uint64)(pNew->prereq & ~mPrereq)));
+
+ return rc;
+}
+
+/*
+** If this function is invoked from within an xBestIndex() callback, it
+** returns a pointer to a buffer containing the name of the collation
+** sequence associated with element iCons of the sqlite3_index_info.aConstraint
+** array. Or, if iCons is out of range or there is no active xBestIndex
+** call, return NULL.
+*/
+SQLITE_API const char *sqlite3_vtab_collation(sqlite3_index_info *pIdxInfo, int iCons){
+ HiddenIndexInfo *pHidden = (HiddenIndexInfo*)&pIdxInfo[1];
+ const char *zRet = 0;
+ if( iCons>=0 && iCons<pIdxInfo->nConstraint ){
+ CollSeq *pC = 0;
+ int iTerm = pIdxInfo->aConstraint[iCons].iTermOffset;
+ Expr *pX = pHidden->pWC->a[iTerm].pExpr;
+ if( pX->pLeft ){
+ pC = sqlite3BinaryCompareCollSeq(pHidden->pParse, pX->pLeft, pX->pRight);
+ }
+ zRet = (pC ? pC->zName : "BINARY");
+ }
+ return zRet;
+}
+
/*
** Add all WhereLoop objects for a table of the join identified by
** pBuilder->pNew->iTab. That table is guaranteed to be a virtual table.
**
-** If there are no LEFT or CROSS JOIN joins in the query, both mExtra and
-** mUnusable are set to 0. Otherwise, mExtra is a mask of all FROM clause
+** If there are no LEFT or CROSS JOIN joins in the query, both mPrereq and
+** mUnusable are set to 0. Otherwise, mPrereq is a mask of all FROM clause
** entries that occur before the virtual table in the FROM clause and are
** separated from it by at least one LEFT or CROSS JOIN. Similarly, the
** mUnusable mask contains all FROM clause entries that occur after the
**
** ... FROM t1, t2 LEFT JOIN t3, t4, vt CROSS JOIN t5, t6;
**
-** then mExtra corresponds to (t1, t2) and mUnusable to (t5, t6).
+** then mPrereq corresponds to (t1, t2) and mUnusable to (t5, t6).
**
-** All the tables in mExtra must be scanned before the current virtual
+** All the tables in mPrereq must be scanned before the current virtual
** table. So any terms for which all prerequisites are satisfied by
-** mExtra may be specified as "usable" in all calls to xBestIndex.
+** mPrereq may be specified as "usable" in all calls to xBestIndex.
** Conversely, all tables in mUnusable must be scanned after the current
** virtual table, so any terms for which the prerequisites overlap with
** mUnusable should always be configured as "not-usable" for xBestIndex.
*/
static int whereLoopAddVirtual(
WhereLoopBuilder *pBuilder, /* WHERE clause information */
- Bitmask mExtra, /* Tables that must be scanned before this one */
+ Bitmask mPrereq, /* Tables that must be scanned before this one */
Bitmask mUnusable /* Tables that must be scanned after this one */
){
+ int rc = SQLITE_OK; /* Return code */
WhereInfo *pWInfo; /* WHERE analysis context */
Parse *pParse; /* The parsing context */
WhereClause *pWC; /* The WHERE clause */
struct SrcList_item *pSrc; /* The FROM clause term to search */
- Table *pTab;
- sqlite3 *db;
- sqlite3_index_info *pIdxInfo;
- struct sqlite3_index_constraint *pIdxCons;
- struct sqlite3_index_constraint_usage *pUsage;
- WhereTerm *pTerm;
- int i, j;
- int iTerm, mxTerm;
- int nConstraint;
- int seenIn = 0; /* True if an IN operator is seen */
- int seenVar = 0; /* True if a non-constant constraint is seen */
- int iPhase; /* 0: const w/o IN, 1: const, 2: no IN, 2: IN */
+ sqlite3_index_info *p; /* Object to pass to xBestIndex() */
+ int nConstraint; /* Number of constraints in p */
+ int bIn; /* True if plan uses IN(...) operator */
WhereLoop *pNew;
- int rc = SQLITE_OK;
+ Bitmask mBest; /* Tables used by best possible plan */
+ u16 mNoOmit;
- assert( (mExtra & mUnusable)==0 );
+ assert( (mPrereq & mUnusable)==0 );
pWInfo = pBuilder->pWInfo;
pParse = pWInfo->pParse;
- db = pParse->db;
pWC = pBuilder->pWC;
pNew = pBuilder->pNew;
pSrc = &pWInfo->pTabList->a[pNew->iTab];
- pTab = pSrc->pTab;
- assert( IsVirtual(pTab) );
- pIdxInfo = allocateIndexInfo(pParse, pWC, mUnusable, pSrc,pBuilder->pOrderBy);
- if( pIdxInfo==0 ) return SQLITE_NOMEM;
- pNew->prereq = 0;
+ assert( IsVirtual(pSrc->pTab) );
+ p = allocateIndexInfo(pParse, pWC, mUnusable, pSrc, pBuilder->pOrderBy,
+ &mNoOmit);
+ if( p==0 ) return SQLITE_NOMEM_BKPT;
pNew->rSetup = 0;
pNew->wsFlags = WHERE_VIRTUALTABLE;
pNew->nLTerm = 0;
pNew->u.vtab.needFree = 0;
- pUsage = pIdxInfo->aConstraintUsage;
- nConstraint = pIdxInfo->nConstraint;
- if( whereLoopResize(db, pNew, nConstraint) ){
- sqlite3DbFree(db, pIdxInfo);
- return SQLITE_NOMEM;
- }
-
- for(iPhase=0; iPhase<=3; iPhase++){
- if( !seenIn && (iPhase&1)!=0 ){
- iPhase++;
- if( iPhase>3 ) break;
- }
- if( !seenVar && iPhase>1 ) break;
- pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
- for(i=0; i<pIdxInfo->nConstraint; i++, pIdxCons++){
- j = pIdxCons->iTermOffset;
- pTerm = &pWC->a[j];
- switch( iPhase ){
- case 0: /* Constants without IN operator */
- pIdxCons->usable = 0;
- if( (pTerm->eOperator & WO_IN)!=0 ){
- seenIn = 1;
- }
- if( (pTerm->prereqRight & ~mExtra)!=0 ){
- seenVar = 1;
- }else if( (pTerm->eOperator & WO_IN)==0 ){
- pIdxCons->usable = 1;
- }
- break;
- case 1: /* Constants with IN operators */
- assert( seenIn );
- pIdxCons->usable = (pTerm->prereqRight & ~mExtra)==0;
- break;
- case 2: /* Variables without IN */
- assert( seenVar );
- pIdxCons->usable = (pTerm->eOperator & WO_IN)==0;
- break;
- default: /* Variables with IN */
- assert( seenVar && seenIn );
- pIdxCons->usable = 1;
- break;
+ nConstraint = p->nConstraint;
+ if( whereLoopResize(pParse->db, pNew, nConstraint) ){
+ sqlite3DbFree(pParse->db, p);
+ return SQLITE_NOMEM_BKPT;
+ }
+
+ /* First call xBestIndex() with all constraints usable. */
+ WHERETRACE(0x40, (" VirtualOne: all usable\n"));
+ rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, 0, p, mNoOmit, &bIn);
+
+ /* If the call to xBestIndex() with all terms enabled produced a plan
+ ** that does not require any source tables (IOW: a plan with mBest==0),
+ ** then there is no point in making any further calls to xBestIndex()
+ ** since they will all return the same result (if the xBestIndex()
+ ** implementation is sane). */
+ if( rc==SQLITE_OK && (mBest = (pNew->prereq & ~mPrereq))!=0 ){
+ int seenZero = 0; /* True if a plan with no prereqs seen */
+ int seenZeroNoIN = 0; /* Plan with no prereqs and no IN(...) seen */
+ Bitmask mPrev = 0;
+ Bitmask mBestNoIn = 0;
+
+ /* If the plan produced by the earlier call uses an IN(...) term, call
+ ** xBestIndex again, this time with IN(...) terms disabled. */
+ if( bIn ){
+ WHERETRACE(0x40, (" VirtualOne: all usable w/o IN\n"));
+ rc = whereLoopAddVirtualOne(
+ pBuilder, mPrereq, ALLBITS, WO_IN, p, mNoOmit, &bIn);
+ assert( bIn==0 );
+ mBestNoIn = pNew->prereq & ~mPrereq;
+ if( mBestNoIn==0 ){
+ seenZero = 1;
+ seenZeroNoIN = 1;
+ }
+ }
+
+ /* Call xBestIndex once for each distinct value of (prereqRight & ~mPrereq)
+ ** in the set of terms that apply to the current virtual table. */
+ while( rc==SQLITE_OK ){
+ int i;
+ Bitmask mNext = ALLBITS;
+ assert( mNext>0 );
+ for(i=0; i<nConstraint; i++){
+ Bitmask mThis = (
+ pWC->a[p->aConstraint[i].iTermOffset].prereqRight & ~mPrereq
+ );
+ if( mThis>mPrev && mThis<mNext ) mNext = mThis;
+ }
+ mPrev = mNext;
+ if( mNext==ALLBITS ) break;
+ if( mNext==mBest || mNext==mBestNoIn ) continue;
+ WHERETRACE(0x40, (" VirtualOne: mPrev=%04llx mNext=%04llx\n",
+ (sqlite3_uint64)mPrev, (sqlite3_uint64)mNext));
+ rc = whereLoopAddVirtualOne(
+ pBuilder, mPrereq, mNext|mPrereq, 0, p, mNoOmit, &bIn);
+ if( pNew->prereq==mPrereq ){
+ seenZero = 1;
+ if( bIn==0 ) seenZeroNoIN = 1;
}
}
- memset(pUsage, 0, sizeof(pUsage[0])*pIdxInfo->nConstraint);
- if( pIdxInfo->needToFreeIdxStr ) sqlite3_free(pIdxInfo->idxStr);
- pIdxInfo->idxStr = 0;
- pIdxInfo->idxNum = 0;
- pIdxInfo->needToFreeIdxStr = 0;
- pIdxInfo->orderByConsumed = 0;
- pIdxInfo->estimatedCost = SQLITE_BIG_DBL / (double)2;
- pIdxInfo->estimatedRows = 25;
- pIdxInfo->idxFlags = 0;
- rc = vtabBestIndex(pParse, pTab, pIdxInfo);
- if( rc ) goto whereLoopAddVtab_exit;
- pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
- pNew->prereq = mExtra;
- mxTerm = -1;
- assert( pNew->nLSlot>=nConstraint );
- for(i=0; i<nConstraint; i++) pNew->aLTerm[i] = 0;
- pNew->u.vtab.omitMask = 0;
- for(i=0; i<nConstraint; i++, pIdxCons++){
- if( (iTerm = pUsage[i].argvIndex - 1)>=0 ){
- j = pIdxCons->iTermOffset;
- if( iTerm>=nConstraint
- || j<0
- || j>=pWC->nTerm
- || pNew->aLTerm[iTerm]!=0
- ){
- rc = SQLITE_ERROR;
- sqlite3ErrorMsg(pParse, "%s.xBestIndex() malfunction", pTab->zName);
- goto whereLoopAddVtab_exit;
- }
- testcase( iTerm==nConstraint-1 );
- testcase( j==0 );
- testcase( j==pWC->nTerm-1 );
- pTerm = &pWC->a[j];
- pNew->prereq |= pTerm->prereqRight;
- assert( iTerm<pNew->nLSlot );
- pNew->aLTerm[iTerm] = pTerm;
- if( iTerm>mxTerm ) mxTerm = iTerm;
- testcase( iTerm==15 );
- testcase( iTerm==16 );
- if( iTerm<16 && pUsage[i].omit ) pNew->u.vtab.omitMask |= 1<<iTerm;
- if( (pTerm->eOperator & WO_IN)!=0 ){
- if( pUsage[i].omit==0 ){
- /* Do not attempt to use an IN constraint if the virtual table
- ** says that the equivalent EQ constraint cannot be safely omitted.
- ** If we do attempt to use such a constraint, some rows might be
- ** repeated in the output. */
- break;
- }
- /* A virtual table that is constrained by an IN clause may not
- ** consume the ORDER BY clause because (1) the order of IN terms
- ** is not necessarily related to the order of output terms and
- ** (2) Multiple outputs from a single IN value will not merge
- ** together. */
- pIdxInfo->orderByConsumed = 0;
- pIdxInfo->idxFlags &= ~SQLITE_INDEX_SCAN_UNIQUE;
- }
- }
- }
- if( i>=nConstraint ){
- pNew->nLTerm = mxTerm+1;
- assert( pNew->nLTerm<=pNew->nLSlot );
- pNew->u.vtab.idxNum = pIdxInfo->idxNum;
- pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr;
- pIdxInfo->needToFreeIdxStr = 0;
- pNew->u.vtab.idxStr = pIdxInfo->idxStr;
- pNew->u.vtab.isOrdered = (i8)(pIdxInfo->orderByConsumed ?
- pIdxInfo->nOrderBy : 0);
- pNew->rSetup = 0;
- pNew->rRun = sqlite3LogEstFromDouble(pIdxInfo->estimatedCost);
- pNew->nOut = sqlite3LogEst(pIdxInfo->estimatedRows);
- /* Set the WHERE_ONEROW flag if the xBestIndex() method indicated
- ** that the scan will visit at most one row. Clear it otherwise. */
- if( pIdxInfo->idxFlags & SQLITE_INDEX_SCAN_UNIQUE ){
- pNew->wsFlags |= WHERE_ONEROW;
- }else{
- pNew->wsFlags &= ~WHERE_ONEROW;
- }
- whereLoopInsert(pBuilder, pNew);
- if( pNew->u.vtab.needFree ){
- sqlite3_free(pNew->u.vtab.idxStr);
- pNew->u.vtab.needFree = 0;
- }
+ /* If the calls to xBestIndex() in the above loop did not find a plan
+ ** that requires no source tables at all (i.e. one guaranteed to be
+ ** usable), make a call here with all source tables disabled */
+ if( rc==SQLITE_OK && seenZero==0 ){
+ WHERETRACE(0x40, (" VirtualOne: all disabled\n"));
+ rc = whereLoopAddVirtualOne(
+ pBuilder, mPrereq, mPrereq, 0, p, mNoOmit, &bIn);
+ if( bIn==0 ) seenZeroNoIN = 1;
}
- }
-whereLoopAddVtab_exit:
- if( pIdxInfo->needToFreeIdxStr ) sqlite3_free(pIdxInfo->idxStr);
- sqlite3DbFree(db, pIdxInfo);
+ /* If the calls to xBestIndex() have so far failed to find a plan
+ ** that requires no source tables at all and does not use an IN(...)
+ ** operator, make a final call to obtain one here. */
+ if( rc==SQLITE_OK && seenZeroNoIN==0 ){
+ WHERETRACE(0x40, (" VirtualOne: all disabled and w/o IN\n"));
+ rc = whereLoopAddVirtualOne(
+ pBuilder, mPrereq, mPrereq, WO_IN, p, mNoOmit, &bIn);
+ }
+ }
+
+ if( p->needToFreeIdxStr ) sqlite3_free(p->idxStr);
+ sqlite3DbFreeNN(pParse->db, p);
return rc;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */
*/
static int whereLoopAddOr(
WhereLoopBuilder *pBuilder,
- Bitmask mExtra,
+ Bitmask mPrereq,
Bitmask mUnusable
){
WhereInfo *pWInfo = pBuilder->pWInfo;
WHERETRACE(0x200, ("OR-term %d of %p has %d subterms:\n",
(int)(pOrTerm-pOrWC->a), pTerm, sSubBuild.pWC->nTerm));
if( sqlite3WhereTrace & 0x400 ){
- for(i=0; i<sSubBuild.pWC->nTerm; i++){
- whereTermPrint(&sSubBuild.pWC->a[i], i);
- }
+ sqlite3WhereClausePrint(sSubBuild.pWC);
}
#endif
#ifndef SQLITE_OMIT_VIRTUALTABLE
if( IsVirtual(pItem->pTab) ){
- rc = whereLoopAddVirtual(&sSubBuild, mExtra, mUnusable);
+ rc = whereLoopAddVirtual(&sSubBuild, mPrereq, mUnusable);
}else
#endif
{
- rc = whereLoopAddBtree(&sSubBuild, mExtra);
+ rc = whereLoopAddBtree(&sSubBuild, mPrereq);
}
if( rc==SQLITE_OK ){
- rc = whereLoopAddOr(&sSubBuild, mExtra, mUnusable);
+ rc = whereLoopAddOr(&sSubBuild, mPrereq, mUnusable);
}
assert( rc==SQLITE_OK || sCur.n==0 );
if( sCur.n==0 ){
*/
static int whereLoopAddAll(WhereLoopBuilder *pBuilder){
WhereInfo *pWInfo = pBuilder->pWInfo;
- Bitmask mExtra = 0;
+ Bitmask mPrereq = 0;
Bitmask mPrior = 0;
int iTab;
SrcList *pTabList = pWInfo->pTabList;
if( ((pItem->fg.jointype|priorJointype) & (JT_LEFT|JT_CROSS))!=0 ){
/* This condition is true when pItem is the FROM clause term on the
** right-hand-side of a LEFT or CROSS JOIN. */
- mExtra = mPrior;
+ mPrereq = mPrior;
}
priorJointype = pItem->fg.jointype;
+#ifndef SQLITE_OMIT_VIRTUALTABLE
if( IsVirtual(pItem->pTab) ){
struct SrcList_item *p;
for(p=&pItem[1]; p<pEnd; p++){
mUnusable |= sqlite3WhereGetMask(&pWInfo->sMaskSet, p->iCursor);
}
}
- rc = whereLoopAddVirtual(pBuilder, mExtra, mUnusable);
- }else{
- rc = whereLoopAddBtree(pBuilder, mExtra);
+ rc = whereLoopAddVirtual(pBuilder, mPrereq, mUnusable);
+ }else
+#endif /* SQLITE_OMIT_VIRTUALTABLE */
+ {
+ rc = whereLoopAddBtree(pBuilder, mPrereq);
}
if( rc==SQLITE_OK ){
- rc = whereLoopAddOr(pBuilder, mExtra, mUnusable);
+ rc = whereLoopAddOr(pBuilder, mPrereq, mUnusable);
}
mPrior |= pNew->maskSelf;
if( rc || db->mallocFailed ) break;
}
/*
-** Examine a WherePath (with the addition of the extra WhereLoop of the 5th
+** Examine a WherePath (with the addition of the extra WhereLoop of the 6th
** parameters) to see if it outputs rows in the requested ORDER BY
** (or GROUP BY) without requiring a separate sort operation. Return N:
**
WhereInfo *pWInfo, /* The WHERE clause */
ExprList *pOrderBy, /* ORDER BY or GROUP BY or DISTINCT clause to check */
WherePath *pPath, /* The WherePath to check */
- u16 wctrlFlags, /* Might contain WHERE_GROUPBY or WHERE_DISTINCTBY */
+ u16 wctrlFlags, /* WHERE_GROUPBY or _DISTINCTBY or _ORDERBY_LIMIT */
u16 nLoop, /* Number of entries in pPath->aLoop[] */
WhereLoop *pLast, /* Add this WhereLoop to the end of pPath->aLoop[] */
Bitmask *pRevMask /* OUT: Mask of WhereLoops to run in reverse order */
u8 isOrderDistinct; /* All prior WhereLoops are order-distinct */
u8 distinctColumns; /* True if the loop has UNIQUE NOT NULL columns */
u8 isMatch; /* iColumn matches a term of the ORDER BY clause */
+ u16 eqOpMask; /* Allowed equality operators */
u16 nKeyCol; /* Number of key columns in pIndex */
u16 nColumn; /* Total number of ordered columns in the index */
u16 nOrderBy; /* Number terms in the ORDER BY clause */
obDone = MASKBIT(nOrderBy)-1;
orderDistinctMask = 0;
ready = 0;
+ eqOpMask = WO_EQ | WO_IS | WO_ISNULL;
+ if( wctrlFlags & WHERE_ORDERBY_LIMIT ) eqOpMask |= WO_IN;
for(iLoop=0; isOrderDistinct && obSat<obDone && iLoop<=nLoop; iLoop++){
if( iLoop>0 ) ready |= pLoop->maskSelf;
- pLoop = iLoop<nLoop ? pPath->aLoop[iLoop] : pLast;
+ if( iLoop<nLoop ){
+ pLoop = pPath->aLoop[iLoop];
+ if( wctrlFlags & WHERE_ORDERBY_LIMIT ) continue;
+ }else{
+ pLoop = pLast;
+ }
if( pLoop->wsFlags & WHERE_VIRTUALTABLE ){
if( pLoop->u.vtab.isOrdered ) obSat = obDone;
break;
+ }else{
+ pLoop->u.btree.nIdxCol = 0;
}
iCur = pWInfo->pTabList->a[pLoop->iTab].iCursor;
if( pOBExpr->op!=TK_COLUMN ) continue;
if( pOBExpr->iTable!=iCur ) continue;
pTerm = sqlite3WhereFindTerm(&pWInfo->sWC, iCur, pOBExpr->iColumn,
- ~ready, WO_EQ|WO_ISNULL|WO_IS, 0);
+ ~ready, eqOpMask, 0);
if( pTerm==0 ) continue;
+ if( pTerm->eOperator==WO_IN ){
+ /* IN terms are only valid for sorting in the ORDER BY LIMIT
+ ** optimization, and then only if they are actually used
+ ** by the query plan */
+ assert( wctrlFlags & WHERE_ORDERBY_LIMIT );
+ for(j=0; j<pLoop->nLTerm && pTerm!=pLoop->aLTerm[j]; j++){}
+ if( j>=pLoop->nLTerm ) continue;
+ }
if( (pTerm->eOperator&(WO_EQ|WO_IS))!=0 && pOBExpr->iColumn>=0 ){
- const char *z1, *z2;
- pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr);
- if( !pColl ) pColl = db->pDfltColl;
- z1 = pColl->zName;
- pColl = sqlite3ExprCollSeq(pWInfo->pParse, pTerm->pExpr);
- if( !pColl ) pColl = db->pDfltColl;
- z2 = pColl->zName;
- if( sqlite3StrICmp(z1, z2)!=0 ) continue;
+ if( sqlite3ExprCollSeqMatch(pWInfo->pParse,
+ pOrderBy->a[i].pExpr, pTerm->pExpr)==0 ){
+ continue;
+ }
testcase( pTerm->pExpr->op==TK_IS );
}
obSat |= MASKBIT(i);
rev = revSet = 0;
distinctColumns = 0;
for(j=0; j<nColumn; j++){
- u8 bOnce; /* True to run the ORDER BY search loop */
+ u8 bOnce = 1; /* True to run the ORDER BY search loop */
- /* Skip over == and IS NULL terms */
- if( j<pLoop->u.btree.nEq
- && pLoop->nSkip==0
- && ((i = pLoop->aLTerm[j]->eOperator) & (WO_EQ|WO_ISNULL|WO_IS))!=0
- ){
- if( i & WO_ISNULL ){
- testcase( isOrderDistinct );
- isOrderDistinct = 0;
+ assert( j>=pLoop->u.btree.nEq
+ || (pLoop->aLTerm[j]==0)==(j<pLoop->nSkip)
+ );
+ if( j<pLoop->u.btree.nEq && j>=pLoop->nSkip ){
+ u16 eOp = pLoop->aLTerm[j]->eOperator;
+
+ /* Skip over == and IS and ISNULL terms. (Also skip IN terms when
+ ** doing WHERE_ORDERBY_LIMIT processing).
+ **
+ ** If the current term is a column of an ((?,?) IN (SELECT...))
+ ** expression for which the SELECT returns more than one column,
+ ** check that it is the only column used by this loop. Otherwise,
+ ** if it is one of two or more, none of the columns can be
+ ** considered to match an ORDER BY term. */
+ if( (eOp & eqOpMask)!=0 ){
+ if( eOp & WO_ISNULL ){
+ testcase( isOrderDistinct );
+ isOrderDistinct = 0;
+ }
+ continue;
+ }else if( ALWAYS(eOp & WO_IN) ){
+ /* ALWAYS() justification: eOp is an equality operator due to the
+ ** j<pLoop->u.btree.nEq constraint above. Any equality other
+ ** than WO_IN is captured by the previous "if". So this one
+ ** always has to be WO_IN. */
+ Expr *pX = pLoop->aLTerm[j]->pExpr;
+ for(i=j+1; i<pLoop->u.btree.nEq; i++){
+ if( pLoop->aLTerm[i]->pExpr==pX ){
+ assert( (pLoop->aLTerm[i]->eOperator & WO_IN) );
+ bOnce = 0;
+ break;
+ }
+ }
}
- continue;
}
/* Get the column number in the table (iColumn) and sort order
if( pIndex ){
iColumn = pIndex->aiColumn[j];
revIdx = pIndex->aSortOrder[j];
- if( iColumn==pIndex->pTable->iPKey ) iColumn = -1;
+ if( iColumn==pIndex->pTable->iPKey ) iColumn = XN_ROWID;
}else{
iColumn = XN_ROWID;
revIdx = 0;
/* Find the ORDER BY term that corresponds to the j-th column
** of the index and mark that ORDER BY term off
*/
- bOnce = 1;
isMatch = 0;
for(i=0; bOnce && i<nOrderBy; i++){
if( MASKBIT(i) & obSat ) continue;
testcase( wctrlFlags & WHERE_GROUPBY );
testcase( wctrlFlags & WHERE_DISTINCTBY );
if( (wctrlFlags & (WHERE_GROUPBY|WHERE_DISTINCTBY))==0 ) bOnce = 0;
- if( iColumn>=(-1) ){
+ if( iColumn>=XN_ROWID ){
if( pOBExpr->op!=TK_COLUMN ) continue;
if( pOBExpr->iTable!=iCur ) continue;
if( pOBExpr->iColumn!=iColumn ) continue;
}else{
- if( sqlite3ExprCompare(pOBExpr,pIndex->aColExpr->a[j].pExpr,iCur) ){
+ Expr *pIdxExpr = pIndex->aColExpr->a[j].pExpr;
+ if( sqlite3ExprCompareSkip(pOBExpr, pIdxExpr, iCur) ){
continue;
}
}
- if( iColumn>=0 ){
- pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr);
- if( !pColl ) pColl = db->pDfltColl;
+ if( iColumn!=XN_ROWID ){
+ pColl = sqlite3ExprNNCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr);
if( sqlite3StrICmp(pColl->zName, pIndex->azColl[j])!=0 ) continue;
}
+ pLoop->u.btree.nIdxCol = j+1;
isMatch = 1;
break;
}
}
}
if( isMatch ){
- if( iColumn<0 ){
+ if( iColumn==XN_ROWID ){
testcase( distinctColumns==0 );
distinctColumns = 1;
}
LogEst rScale, rSortCost;
assert( nOrderBy>0 && 66==sqlite3LogEst(100) );
rScale = sqlite3LogEst((nOrderBy-nSorted)*100/nOrderBy) - 66;
- rSortCost = nRow + estLog(nRow) + rScale + 16;
+ rSortCost = nRow + rScale + 16;
- /* TUNING: The cost of implementing DISTINCT using a B-TREE is
- ** similar but with a larger constant of proportionality.
- ** Multiply by an additional factor of 3.0. */
- if( pWInfo->wctrlFlags & WHERE_WANT_DISTINCT ){
- rSortCost += 16;
+ /* Multiple by log(M) where M is the number of output rows.
+ ** Use the LIMIT for M if it is smaller */
+ if( (pWInfo->wctrlFlags & WHERE_USE_LIMIT)!=0 && pWInfo->iLimit<nRow ){
+ nRow = pWInfo->iLimit;
}
-
+ rSortCost += estLog(nRow);
return rSortCost;
}
/* Allocate and initialize space for aTo, aFrom and aSortCost[] */
nSpace = (sizeof(WherePath)+sizeof(WhereLoop*)*nLoop)*mxChoice*2;
nSpace += sizeof(LogEst) * nOrderBy;
- pSpace = sqlite3DbMallocRaw(db, nSpace);
- if( pSpace==0 ) return SQLITE_NOMEM;
+ pSpace = sqlite3DbMallocRawNN(db, nSpace);
+ if( pSpace==0 ) return SQLITE_NOMEM_BKPT;
aTo = (WherePath*)pSpace;
aFrom = aTo+mxChoice;
memset(aFrom, 0, sizeof(aFrom[0]));
if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue;
if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue;
+ if( (pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 && pFrom->nRow<10 ){
+ /* Do not use an automatic index if the this loop is expected
+ ** to run less than 2 times. */
+ assert( 10==sqlite3LogEst(2) );
+ continue;
+ }
/* At this point, pWLoop is a candidate to be the next loop.
** Compute its cost */
rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow);
rUnsorted, rCost));
}else{
rCost = rUnsorted;
+ rUnsorted -= 2; /* TUNING: Slight bias in favor of no-sort plans */
}
/* Check to see if pWLoop should be added to the set of
** this candidate as not viable. */
#ifdef WHERETRACE_ENABLED /* 0x4 */
if( sqlite3WhereTrace&0x4 ){
- sqlite3DebugPrintf("Skip %s cost=%-3d,%3d order=%c\n",
- wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
+ sqlite3DebugPrintf("Skip %s cost=%-3d,%3d,%3d order=%c\n",
+ wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted,
isOrdered>=0 ? isOrdered+'0' : '?');
}
#endif
pTo = &aTo[jj];
#ifdef WHERETRACE_ENABLED /* 0x4 */
if( sqlite3WhereTrace&0x4 ){
- sqlite3DebugPrintf("New %s cost=%-3d,%3d order=%c\n",
- wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
+ sqlite3DebugPrintf("New %s cost=%-3d,%3d,%3d order=%c\n",
+ wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted,
isOrdered>=0 ? isOrdered+'0' : '?');
}
#endif
}else{
/* Control reaches here if best-so-far path pTo=aTo[jj] covers the
- ** same set of loops and has the sam isOrdered setting as the
+ ** same set of loops and has the same isOrdered setting as the
** candidate path. Check to see if the candidate should replace
- ** pTo or if the candidate should be skipped */
- if( pTo->rCost<rCost || (pTo->rCost==rCost && pTo->nRow<=nOut) ){
+ ** pTo or if the candidate should be skipped.
+ **
+ ** The conditional is an expanded vector comparison equivalent to:
+ ** (pTo->rCost,pTo->nRow,pTo->rUnsorted) <= (rCost,nOut,rUnsorted)
+ */
+ if( pTo->rCost<rCost
+ || (pTo->rCost==rCost
+ && (pTo->nRow<nOut
+ || (pTo->nRow==nOut && pTo->rUnsorted<=rUnsorted)
+ )
+ )
+ ){
#ifdef WHERETRACE_ENABLED /* 0x4 */
if( sqlite3WhereTrace&0x4 ){
sqlite3DebugPrintf(
- "Skip %s cost=%-3d,%3d order=%c",
- wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
+ "Skip %s cost=%-3d,%3d,%3d order=%c",
+ wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted,
isOrdered>=0 ? isOrdered+'0' : '?');
- sqlite3DebugPrintf(" vs %s cost=%-3d,%d order=%c\n",
+ sqlite3DebugPrintf(" vs %s cost=%-3d,%3d,%3d order=%c\n",
wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow,
- pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
+ pTo->rUnsorted, pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
}
#endif
/* Discard the candidate path from further consideration */
#ifdef WHERETRACE_ENABLED /* 0x4 */
if( sqlite3WhereTrace&0x4 ){
sqlite3DebugPrintf(
- "Update %s cost=%-3d,%3d order=%c",
- wherePathName(pFrom, iLoop, pWLoop), rCost, nOut,
+ "Update %s cost=%-3d,%3d,%3d order=%c",
+ wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted,
isOrdered>=0 ? isOrdered+'0' : '?');
- sqlite3DebugPrintf(" was %s cost=%-3d,%3d order=%c\n",
+ sqlite3DebugPrintf(" was %s cost=%-3d,%3d,%3d order=%c\n",
wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow,
- pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
+ pTo->rUnsorted, pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?');
}
#endif
}
if( nFrom==0 ){
sqlite3ErrorMsg(pParse, "no query solution");
- sqlite3DbFree(db, pSpace);
+ sqlite3DbFreeNN(db, pSpace);
return SQLITE_ERROR;
}
}
}else{
pWInfo->nOBSat = pFrom->isOrdered;
- if( pWInfo->nOBSat<0 ) pWInfo->nOBSat = 0;
pWInfo->revMask = pFrom->revLoop;
+ if( pWInfo->nOBSat<=0 ){
+ pWInfo->nOBSat = 0;
+ if( nLoop>0 ){
+ u32 wsFlags = pFrom->aLoop[nLoop-1]->wsFlags;
+ if( (wsFlags & WHERE_ONEROW)==0
+ && (wsFlags&(WHERE_IPK|WHERE_COLUMN_IN))!=(WHERE_IPK|WHERE_COLUMN_IN)
+ ){
+ Bitmask m = 0;
+ int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pOrderBy, pFrom,
+ WHERE_ORDERBY_LIMIT, nLoop-1, pFrom->aLoop[nLoop-1], &m);
+ testcase( wsFlags & WHERE_IPK );
+ testcase( wsFlags & WHERE_COLUMN_IN );
+ if( rc==pWInfo->pOrderBy->nExpr ){
+ pWInfo->bOrderedInnerLoop = 1;
+ pWInfo->revMask = m;
+ }
+ }
+ }
+ }
}
if( (pWInfo->wctrlFlags & WHERE_SORTBYGROUP)
&& pWInfo->nOBSat==pWInfo->pOrderBy->nExpr && nLoop>0
pWInfo->nRowOut = pFrom->nRow;
/* Free temporary memory and return success */
- sqlite3DbFree(db, pSpace);
+ sqlite3DbFreeNN(db, pSpace);
return SQLITE_OK;
}
int j;
Table *pTab;
Index *pIdx;
-
+
pWInfo = pBuilder->pWInfo;
- if( pWInfo->wctrlFlags & WHERE_FORCE_TABLE ) return 0;
+ if( pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE ) return 0;
assert( pWInfo->pTabList->nSrc>=1 );
pItem = pWInfo->pTabList->a;
pTab = pItem->pTab;
if( pLoop->wsFlags ){
pLoop->nOut = (LogEst)1;
pWInfo->a[0].pWLoop = pLoop;
- pLoop->maskSelf = sqlite3WhereGetMask(&pWInfo->sMaskSet, iCur);
+ assert( pWInfo->sMaskSet.n==1 && iCur==pWInfo->sMaskSet.ix[0] );
+ pLoop->maskSelf = 1; /* sqlite3WhereGetMask(&pWInfo->sMaskSet, iCur); */
pWInfo->a[0].iTabCur = iCur;
pWInfo->nRowOut = 1;
if( pWInfo->pOrderBy ) pWInfo->nOBSat = pWInfo->pOrderBy->nExpr;
return 0;
}
+/*
+** Helper function for exprIsDeterministic().
+*/
+static int exprNodeIsDeterministic(Walker *pWalker, Expr *pExpr){
+ if( pExpr->op==TK_FUNCTION && ExprHasProperty(pExpr, EP_ConstFunc)==0 ){
+ pWalker->eCode = 0;
+ return WRC_Abort;
+ }
+ return WRC_Continue;
+}
+
+/*
+** Return true if the expression contains no non-deterministic SQL
+** functions. Do not consider non-deterministic SQL functions that are
+** part of sub-select statements.
+*/
+static int exprIsDeterministic(Expr *p){
+ Walker w;
+ memset(&w, 0, sizeof(w));
+ w.eCode = 1;
+ w.xExprCallback = exprNodeIsDeterministic;
+ w.xSelectCallback = sqlite3SelectWalkFail;
+ sqlite3WalkExpr(&w, p);
+ return w.eCode;
+}
+
/*
** Generate the beginning of the loop used for WHERE clause processing.
** The return value is a pointer to an opaque structure that contains
** is called from an UPDATE or DELETE statement, then pOrderBy is NULL.
**
** The iIdxCur parameter is the cursor number of an index. If
-** WHERE_ONETABLE_ONLY is set, iIdxCur is the cursor number of an index
+** WHERE_OR_SUBCLAUSE is set, iIdxCur is the cursor number of an index
** to use for OR clause processing. The WHERE clause should use this
** specific cursor. If WHERE_ONEPASS_DESIRED is set, then iIdxCur is
** the first cursor in an array of cursors for all indices. iIdxCur should
** used.
*/
SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(
- Parse *pParse, /* The parser context */
- SrcList *pTabList, /* FROM clause: A list of all tables to be scanned */
- Expr *pWhere, /* The WHERE clause */
- ExprList *pOrderBy, /* An ORDER BY (or GROUP BY) clause, or NULL */
- ExprList *pResultSet, /* Result set of the query */
- u16 wctrlFlags, /* One of the WHERE_* flags defined in sqliteInt.h */
- int iIdxCur /* If WHERE_ONETABLE_ONLY is set, index cursor number */
+ Parse *pParse, /* The parser context */
+ SrcList *pTabList, /* FROM clause: A list of all tables to be scanned */
+ Expr *pWhere, /* The WHERE clause */
+ ExprList *pOrderBy, /* An ORDER BY (or GROUP BY) clause, or NULL */
+ ExprList *pResultSet, /* Query result set. Req'd for DISTINCT */
+ u16 wctrlFlags, /* The WHERE_* flags defined in sqliteInt.h */
+ int iAuxArg /* If WHERE_OR_SUBCLAUSE is set, index cursor number
+ ** If WHERE_USE_LIMIT, then the limit amount */
){
int nByteWInfo; /* Num. bytes allocated for WhereInfo struct */
int nTabList; /* Number of elements in pTabList */
int ii; /* Loop counter */
sqlite3 *db; /* Database connection */
int rc; /* Return code */
+ u8 bFordelete = 0; /* OPFLAG_FORDELETE or zero, as appropriate */
assert( (wctrlFlags & WHERE_ONEPASS_MULTIROW)==0 || (
(wctrlFlags & WHERE_ONEPASS_DESIRED)!=0
- && (wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0
+ && (wctrlFlags & WHERE_OR_SUBCLAUSE)==0
));
+ /* Only one of WHERE_OR_SUBCLAUSE or WHERE_USE_LIMIT */
+ assert( (wctrlFlags & WHERE_OR_SUBCLAUSE)==0
+ || (wctrlFlags & WHERE_USE_LIMIT)==0 );
+
/* Variable initialization */
db = pParse->db;
memset(&sWLB, 0, sizeof(sWLB));
}
/* This function normally generates a nested loop for all tables in
- ** pTabList. But if the WHERE_ONETABLE_ONLY flag is set, then we should
+ ** pTabList. But if the WHERE_OR_SUBCLAUSE flag is set, then we should
** only generate code for the first table in pTabList and assume that
** any cursors associated with subsequent tables are uninitialized.
*/
- nTabList = (wctrlFlags & WHERE_ONETABLE_ONLY) ? 1 : pTabList->nSrc;
+ nTabList = (wctrlFlags & WHERE_OR_SUBCLAUSE) ? 1 : pTabList->nSrc;
/* Allocate and initialize the WhereInfo structure that will become the
** return value. A single allocation is used to store the WhereInfo
** some architectures. Hence the ROUND8() below.
*/
nByteWInfo = ROUND8(sizeof(WhereInfo)+(nTabList-1)*sizeof(WhereLevel));
- pWInfo = sqlite3DbMallocZero(db, nByteWInfo + sizeof(WhereLoop));
+ pWInfo = sqlite3DbMallocRawNN(db, nByteWInfo + sizeof(WhereLoop));
if( db->mallocFailed ){
sqlite3DbFree(db, pWInfo);
pWInfo = 0;
goto whereBeginError;
}
- pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1;
- pWInfo->nLevel = nTabList;
pWInfo->pParse = pParse;
pWInfo->pTabList = pTabList;
pWInfo->pOrderBy = pOrderBy;
+ pWInfo->pWhere = pWhere;
pWInfo->pResultSet = pResultSet;
+ pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1;
+ pWInfo->nLevel = nTabList;
pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v);
pWInfo->wctrlFlags = wctrlFlags;
+ pWInfo->iLimit = iAuxArg;
pWInfo->savedNQueryLoop = pParse->nQueryLoop;
+ memset(&pWInfo->nOBSat, 0,
+ offsetof(WhereInfo,sWC) - offsetof(WhereInfo,nOBSat));
+ memset(&pWInfo->a[0], 0, sizeof(WhereLoop)+nTabList*sizeof(WhereLevel));
assert( pWInfo->eOnePass==ONEPASS_OFF ); /* ONEPASS defaults to OFF */
pMaskSet = &pWInfo->sMaskSet;
sWLB.pWInfo = pWInfo;
sqlite3WhereClauseInit(&pWInfo->sWC, pWInfo);
sqlite3WhereSplit(&pWInfo->sWC, pWhere, TK_AND);
- /* Special case: a WHERE clause that is constant. Evaluate the
- ** expression and either jump over all of the code or fall thru.
- */
- for(ii=0; ii<sWLB.pWC->nTerm; ii++){
- if( nTabList==0 || sqlite3ExprIsConstantNotJoin(sWLB.pWC->a[ii].pExpr) ){
- sqlite3ExprIfFalse(pParse, sWLB.pWC->a[ii].pExpr, pWInfo->iBreak,
- SQLITE_JUMPIFNULL);
- sWLB.pWC->a[ii].wtFlags |= TERM_CODED;
- }
- }
-
/* Special case: No FROM clause
*/
if( nTabList==0 ){
if( wctrlFlags & WHERE_WANT_DISTINCT ){
pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE;
}
+ }else{
+ /* Assign a bit from the bitmask to every term in the FROM clause.
+ **
+ ** The N-th term of the FROM clause is assigned a bitmask of 1<<N.
+ **
+ ** The rule of the previous sentence ensures thta if X is the bitmask for
+ ** a table T, then X-1 is the bitmask for all other tables to the left of T.
+ ** Knowing the bitmask for all tables to the left of a left join is
+ ** important. Ticket #3015.
+ **
+ ** Note that bitmasks are created for all pTabList->nSrc tables in
+ ** pTabList, not just the first nTabList tables. nTabList is normally
+ ** equal to pTabList->nSrc but might be shortened to 1 if the
+ ** WHERE_OR_SUBCLAUSE flag is set.
+ */
+ ii = 0;
+ do{
+ createMask(pMaskSet, pTabList->a[ii].iCursor);
+ sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC);
+ }while( (++ii)<pTabList->nSrc );
+ #ifdef SQLITE_DEBUG
+ {
+ Bitmask mx = 0;
+ for(ii=0; ii<pTabList->nSrc; ii++){
+ Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor);
+ assert( m>=mx );
+ mx = m;
+ }
+ }
+ #endif
}
+
+ /* Analyze all of the subexpressions. */
+ sqlite3WhereExprAnalyze(pTabList, &pWInfo->sWC);
+ if( db->mallocFailed ) goto whereBeginError;
- /* Assign a bit from the bitmask to every term in the FROM clause.
+ /* Special case: WHERE terms that do not refer to any tables in the join
+ ** (constant expressions). Evaluate each such term, and jump over all the
+ ** generated code if the result is not true.
**
- ** The N-th term of the FROM clause is assigned a bitmask of 1<<N.
+ ** Do not do this if the expression contains non-deterministic functions
+ ** that are not within a sub-select. This is not strictly required, but
+ ** preserves SQLite's legacy behaviour in the following two cases:
**
- ** The rule of the previous sentence ensures thta if X is the bitmask for
- ** a table T, then X-1 is the bitmask for all other tables to the left of T.
- ** Knowing the bitmask for all tables to the left of a left join is
- ** important. Ticket #3015.
- **
- ** Note that bitmasks are created for all pTabList->nSrc tables in
- ** pTabList, not just the first nTabList tables. nTabList is normally
- ** equal to pTabList->nSrc but might be shortened to 1 if the
- ** WHERE_ONETABLE_ONLY flag is set.
+ ** FROM ... WHERE random()>0; -- eval random() once per row
+ ** FROM ... WHERE (SELECT random())>0; -- eval random() once overall
*/
- for(ii=0; ii<pTabList->nSrc; ii++){
- createMask(pMaskSet, pTabList->a[ii].iCursor);
- sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC);
- }
-#ifdef SQLITE_DEBUG
- for(ii=0; ii<pTabList->nSrc; ii++){
- Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor);
- assert( m==MASKBIT(ii) );
+ for(ii=0; ii<sWLB.pWC->nTerm; ii++){
+ WhereTerm *pT = &sWLB.pWC->a[ii];
+ if( pT->wtFlags & TERM_VIRTUAL ) continue;
+ if( pT->prereqAll==0 && (nTabList==0 || exprIsDeterministic(pT->pExpr)) ){
+ sqlite3ExprIfFalse(pParse, pT->pExpr, pWInfo->iBreak, SQLITE_JUMPIFNULL);
+ pT->wtFlags |= TERM_CODED;
+ }
}
-#endif
-
- /* Analyze all of the subexpressions. */
- sqlite3WhereExprAnalyze(pTabList, &pWInfo->sWC);
- if( db->mallocFailed ) goto whereBeginError;
if( wctrlFlags & WHERE_WANT_DISTINCT ){
if( isDistinctRedundant(pParse, pTabList, &pWInfo->sWC, pResultSet) ){
}
/* Construct the WhereLoop objects */
- WHERETRACE(0xffff,("*** Optimizer Start *** (wctrlFlags: 0x%x)\n",
- wctrlFlags));
#if defined(WHERETRACE_ENABLED)
- if( sqlite3WhereTrace & 0x100 ){ /* Display all terms of the WHERE clause */
- int i;
- for(i=0; i<sWLB.pWC->nTerm; i++){
- whereTermPrint(&sWLB.pWC->a[i], i);
+ if( sqlite3WhereTrace & 0xffff ){
+ sqlite3DebugPrintf("*** Optimizer Start *** (wctrlFlags: 0x%x",wctrlFlags);
+ if( wctrlFlags & WHERE_USE_LIMIT ){
+ sqlite3DebugPrintf(", limit: %d", iAuxArg);
}
+ sqlite3DebugPrintf(")\n");
+ }
+ if( sqlite3WhereTrace & 0x100 ){ /* Display all terms of the WHERE clause */
+ sqlite3WhereClausePrint(sWLB.pWC);
}
#endif
static const char zLabel[] = "0123456789abcdefghijklmnopqrstuvwyxz"
"ABCDEFGHIJKLMNOPQRSTUVWYXZ";
for(p=pWInfo->pLoops, i=0; p; p=p->pNextLoop, i++){
- p->cId = zLabel[i%sizeof(zLabel)];
+ p->cId = zLabel[i%(sizeof(zLabel)-1)];
whereLoopPrint(p, sWLB.pWC);
}
}
}
}
if( pWInfo->pOrderBy==0 && (db->flags & SQLITE_ReverseOrder)!=0 ){
- pWInfo->revMask = (Bitmask)(-1);
+ pWInfo->revMask = ALLBITS;
}
if( pParse->nErr || NEVER(db->mallocFailed) ){
goto whereBeginError;
}
}
#endif
- /* Attempt to omit tables from the join that do not effect the result */
+
+ /* Attempt to omit tables from the join that do not affect the result.
+ ** For a table to not affect the result, the following must be true:
+ **
+ ** 1) The query must not be an aggregate.
+ ** 2) The table must be the RHS of a LEFT JOIN.
+ ** 3) Either the query must be DISTINCT, or else the ON or USING clause
+ ** must contain a constraint that limits the scan of the table to
+ ** at most a single row.
+ ** 4) The table must not be referenced by any part of the query apart
+ ** from its own USING or ON clause.
+ **
+ ** For example, given:
+ **
+ ** CREATE TABLE t1(ipk INTEGER PRIMARY KEY, v1);
+ ** CREATE TABLE t2(ipk INTEGER PRIMARY KEY, v2);
+ ** CREATE TABLE t3(ipk INTEGER PRIMARY KEY, v3);
+ **
+ ** then table t2 can be omitted from the following:
+ **
+ ** SELECT v1, v3 FROM t1
+ ** LEFT JOIN t2 USING (t1.ipk=t2.ipk)
+ ** LEFT JOIN t3 USING (t1.ipk=t3.ipk)
+ **
+ ** or from:
+ **
+ ** SELECT DISTINCT v1, v3 FROM t1
+ ** LEFT JOIN t2
+ ** LEFT JOIN t3 USING (t1.ipk=t3.ipk)
+ */
+ notReady = ~(Bitmask)0;
if( pWInfo->nLevel>=2
- && pResultSet!=0
+ && pResultSet!=0 /* guarantees condition (1) above */
&& OptimizationEnabled(db, SQLITE_OmitNoopJoin)
){
+ int i;
Bitmask tabUsed = sqlite3WhereExprListUsage(pMaskSet, pResultSet);
if( sWLB.pOrderBy ){
tabUsed |= sqlite3WhereExprListUsage(pMaskSet, sWLB.pOrderBy);
}
- while( pWInfo->nLevel>=2 ){
+ for(i=pWInfo->nLevel-1; i>=1; i--){
WhereTerm *pTerm, *pEnd;
- pLoop = pWInfo->a[pWInfo->nLevel-1].pWLoop;
- if( (pWInfo->pTabList->a[pLoop->iTab].fg.jointype & JT_LEFT)==0 ) break;
+ struct SrcList_item *pItem;
+ pLoop = pWInfo->a[i].pWLoop;
+ pItem = &pWInfo->pTabList->a[pLoop->iTab];
+ if( (pItem->fg.jointype & JT_LEFT)==0 ) continue;
if( (wctrlFlags & WHERE_WANT_DISTINCT)==0
&& (pLoop->wsFlags & WHERE_ONEROW)==0
){
- break;
+ continue;
}
- if( (tabUsed & pLoop->maskSelf)!=0 ) break;
+ if( (tabUsed & pLoop->maskSelf)!=0 ) continue;
pEnd = sWLB.pWC->a + sWLB.pWC->nTerm;
for(pTerm=sWLB.pWC->a; pTerm<pEnd; pTerm++){
- if( (pTerm->prereqAll & pLoop->maskSelf)!=0
- && !ExprHasProperty(pTerm->pExpr, EP_FromJoin)
- ){
- break;
+ if( (pTerm->prereqAll & pLoop->maskSelf)!=0 ){
+ if( !ExprHasProperty(pTerm->pExpr, EP_FromJoin)
+ || pTerm->pExpr->iRightJoinTable!=pItem->iCursor
+ ){
+ break;
+ }
}
}
- if( pTerm<pEnd ) break;
+ if( pTerm<pEnd ) continue;
WHERETRACE(0xffff, ("-> drop loop %c not used\n", pLoop->cId));
+ notReady &= ~pLoop->maskSelf;
+ for(pTerm=sWLB.pWC->a; pTerm<pEnd; pTerm++){
+ if( (pTerm->prereqAll & pLoop->maskSelf)!=0 ){
+ pTerm->wtFlags |= TERM_CODED;
+ }
+ }
+ if( i!=pWInfo->nLevel-1 ){
+ int nByte = (pWInfo->nLevel-1-i) * sizeof(WhereLevel);
+ memmove(&pWInfo->a[i], &pWInfo->a[i+1], nByte);
+ }
pWInfo->nLevel--;
nTabList--;
}
/* If the caller is an UPDATE or DELETE statement that is requesting
** to use a one-pass algorithm, determine if this is appropriate.
- ** The one-pass algorithm only works if the WHERE clause constrains
- ** the statement to update or delete a single row.
+ **
+ ** A one-pass approach can be used if the caller has requested one
+ ** and either (a) the scan visits at most one row or (b) each
+ ** of the following are true:
+ **
+ ** * the caller has indicated that a one-pass approach can be used
+ ** with multiple rows (by setting WHERE_ONEPASS_MULTIROW), and
+ ** * the table is not a virtual table, and
+ ** * either the scan does not use the OR optimization or the caller
+ ** is a DELETE operation (WHERE_DUPLICATES_OK is only specified
+ ** for DELETE).
+ **
+ ** The last qualification is because an UPDATE statement uses
+ ** WhereInfo.aiCurOnePass[1] to determine whether or not it really can
+ ** use a one-pass approach, and this is not set accurately for scans
+ ** that use the OR optimization.
*/
assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 );
if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 ){
int wsFlags = pWInfo->a[0].pWLoop->wsFlags;
int bOnerow = (wsFlags & WHERE_ONEROW)!=0;
- if( bOnerow || ( (wctrlFlags & WHERE_ONEPASS_MULTIROW)
- && 0==(wsFlags & WHERE_VIRTUALTABLE)
+ if( bOnerow || (
+ 0!=(wctrlFlags & WHERE_ONEPASS_MULTIROW)
+ && 0==(wsFlags & WHERE_VIRTUALTABLE)
+ && (0==(wsFlags & WHERE_MULTI_OR) || (wctrlFlags & WHERE_DUPLICATES_OK))
)){
pWInfo->eOnePass = bOnerow ? ONEPASS_SINGLE : ONEPASS_MULTI;
- if( HasRowid(pTabList->a[0].pTab) ){
- pWInfo->a[0].pWLoop->wsFlags &= ~WHERE_IDX_ONLY;
+ if( HasRowid(pTabList->a[0].pTab) && (wsFlags & WHERE_IDX_ONLY) ){
+ if( wctrlFlags & WHERE_ONEPASS_MULTIROW ){
+ bFordelete = OPFLAG_FORDELETE;
+ }
+ pWInfo->a[0].pWLoop->wsFlags = (wsFlags & ~WHERE_IDX_ONLY);
}
}
}
}else
#endif
if( (pLoop->wsFlags & WHERE_IDX_ONLY)==0
- && (wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0 ){
+ && (wctrlFlags & WHERE_OR_SUBCLAUSE)==0 ){
int op = OP_OpenRead;
if( pWInfo->eOnePass!=ONEPASS_OFF ){
op = OP_OpenWrite;
Bitmask b = pTabItem->colUsed;
int n = 0;
for(; b; b=b>>1, n++){}
- sqlite3VdbeChangeP4(v, sqlite3VdbeCurrentAddr(v)-1,
- SQLITE_INT_TO_PTR(n), P4_INT32);
+ sqlite3VdbeChangeP4(v, -1, SQLITE_INT_TO_PTR(n), P4_INT32);
assert( n<=pTab->nCol );
}
+#ifdef SQLITE_ENABLE_CURSOR_HINTS
+ if( pLoop->u.btree.pIndex!=0 ){
+ sqlite3VdbeChangeP5(v, OPFLAG_SEEKEQ|bFordelete);
+ }else
+#endif
+ {
+ sqlite3VdbeChangeP5(v, bFordelete);
+ }
#ifdef SQLITE_ENABLE_COLUMN_USED_MASK
sqlite3VdbeAddOp4Dup8(v, OP_ColumnsUsed, pTabItem->iCursor, 0, 0,
(const u8*)&pTabItem->colUsed, P4_INT64);
Index *pIx = pLoop->u.btree.pIndex;
int iIndexCur;
int op = OP_OpenRead;
- /* iIdxCur is always set if to a positive value if ONEPASS is possible */
- assert( iIdxCur!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 );
+ /* iAuxArg is always set to a positive value if ONEPASS is possible */
+ assert( iAuxArg!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 );
if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx)
- && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0
+ && (wctrlFlags & WHERE_OR_SUBCLAUSE)!=0
){
/* This is one term of an OR-optimization using the PRIMARY KEY of a
** WITHOUT ROWID table. No need for a separate index */
op = 0;
}else if( pWInfo->eOnePass!=ONEPASS_OFF ){
Index *pJ = pTabItem->pTab->pIndex;
- iIndexCur = iIdxCur;
+ iIndexCur = iAuxArg;
assert( wctrlFlags & WHERE_ONEPASS_DESIRED );
while( ALWAYS(pJ) && pJ!=pIx ){
iIndexCur++;
}
op = OP_OpenWrite;
pWInfo->aiCurOnePass[1] = iIndexCur;
- }else if( iIdxCur && (wctrlFlags & WHERE_ONETABLE_ONLY)!=0 ){
- iIndexCur = iIdxCur;
- if( wctrlFlags & WHERE_REOPEN_IDX ) op = OP_ReopenIdx;
+ }else if( iAuxArg && (wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 ){
+ iIndexCur = iAuxArg;
+ op = OP_ReopenIdx;
}else{
iIndexCur = pParse->nTab++;
}
if( (pLoop->wsFlags & WHERE_CONSTRAINT)!=0
&& (pLoop->wsFlags & (WHERE_COLUMN_RANGE|WHERE_SKIPSCAN))==0
&& (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0
+ && pWInfo->eDistinct!=WHERE_DISTINCT_ORDERED
){
sqlite3VdbeChangeP5(v, OPFLAG_SEEKEQ); /* Hint to COMDB2 */
}
** loop below generates code for a single nested loop of the VM
** program.
*/
- notReady = ~(Bitmask)0;
for(ii=0; ii<nTabList; ii++){
int addrExplain;
int wsFlags;
pLevel->addrBody = sqlite3VdbeCurrentAddr(v);
notReady = sqlite3WhereCodeOneLoopStart(pWInfo, ii, notReady);
pWInfo->iContinue = pLevel->addrCont;
- if( (wsFlags&WHERE_MULTI_OR)==0 && (wctrlFlags&WHERE_ONETABLE_ONLY)==0 ){
+ if( (wsFlags&WHERE_MULTI_OR)==0 && (wctrlFlags&WHERE_OR_SUBCLAUSE)==0 ){
sqlite3WhereAddScanStatus(v, pTabList, pLevel, addrExplain);
}
}
int addr;
pLevel = &pWInfo->a[i];
pLoop = pLevel->pWLoop;
- sqlite3VdbeResolveLabel(v, pLevel->addrCont);
if( pLevel->op!=OP_Noop ){
+#ifndef SQLITE_DISABLE_SKIPAHEAD_DISTINCT
+ int addrSeek = 0;
+ Index *pIdx;
+ int n;
+ if( pWInfo->eDistinct==WHERE_DISTINCT_ORDERED
+ && i==pWInfo->nLevel-1 /* Ticket [ef9318757b152e3] 2017-10-21 */
+ && (pLoop->wsFlags & WHERE_INDEXED)!=0
+ && (pIdx = pLoop->u.btree.pIndex)->hasStat1
+ && (n = pLoop->u.btree.nIdxCol)>0
+ && pIdx->aiRowLogEst[n]>=36
+ ){
+ int r1 = pParse->nMem+1;
+ int j, op;
+ for(j=0; j<n; j++){
+ sqlite3VdbeAddOp3(v, OP_Column, pLevel->iIdxCur, j, r1+j);
+ }
+ pParse->nMem += n+1;
+ op = pLevel->op==OP_Prev ? OP_SeekLT : OP_SeekGT;
+ addrSeek = sqlite3VdbeAddOp4Int(v, op, pLevel->iIdxCur, 0, r1, n);
+ VdbeCoverageIf(v, op==OP_SeekLT);
+ VdbeCoverageIf(v, op==OP_SeekGT);
+ sqlite3VdbeAddOp2(v, OP_Goto, 1, pLevel->p2);
+ }
+#endif /* SQLITE_DISABLE_SKIPAHEAD_DISTINCT */
+ /* The common case: Advance to the next row */
+ sqlite3VdbeResolveLabel(v, pLevel->addrCont);
sqlite3VdbeAddOp3(v, pLevel->op, pLevel->p1, pLevel->p2, pLevel->p3);
sqlite3VdbeChangeP5(v, pLevel->p5);
VdbeCoverage(v);
VdbeCoverageIf(v, pLevel->op==OP_Next);
VdbeCoverageIf(v, pLevel->op==OP_Prev);
VdbeCoverageIf(v, pLevel->op==OP_VNext);
+#ifndef SQLITE_DISABLE_SKIPAHEAD_DISTINCT
+ if( addrSeek ) sqlite3VdbeJumpHere(v, addrSeek);
+#endif
+ }else{
+ sqlite3VdbeResolveLabel(v, pLevel->addrCont);
}
if( pLoop->wsFlags & WHERE_IN_ABLE && pLevel->u.in.nIn>0 ){
struct InLoop *pIn;
sqlite3VdbeResolveLabel(v, pLevel->addrNxt);
for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){
sqlite3VdbeJumpHere(v, pIn->addrInTop+1);
- sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop);
- VdbeCoverage(v);
- VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen);
- VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen);
+ if( pIn->eEndLoopOp!=OP_Noop ){
+ sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop);
+ VdbeCoverage(v);
+ VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen);
+ VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen);
+ }
sqlite3VdbeJumpHere(v, pIn->addrInTop-1);
}
}
sqlite3VdbeJumpHere(v, pLevel->addrSkip);
sqlite3VdbeJumpHere(v, pLevel->addrSkip-2);
}
+#ifndef SQLITE_LIKE_DOESNT_MATCH_BLOBS
if( pLevel->addrLikeRep ){
- int op;
- if( sqlite3VdbeGetOp(v, pLevel->addrLikeRep-1)->p1 ){
- op = OP_DecrJumpZero;
- }else{
- op = OP_JumpZeroIncr;
- }
- sqlite3VdbeAddOp2(v, op, pLevel->iLikeRepCntr, pLevel->addrLikeRep);
+ sqlite3VdbeAddOp2(v, OP_DecrJumpZero, (int)(pLevel->iLikeRepCntr>>1),
+ pLevel->addrLikeRep);
VdbeCoverage(v);
}
+#endif
if( pLevel->iLeftJoin ){
+ int ws = pLoop->wsFlags;
addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin); VdbeCoverage(v);
- assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0
- || (pLoop->wsFlags & WHERE_INDEXED)!=0 );
- if( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 ){
- sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor);
+ assert( (ws & WHERE_IDX_ONLY)==0 || (ws & WHERE_INDEXED)!=0 );
+ if( (ws & WHERE_IDX_ONLY)==0 ){
+ assert( pLevel->iTabCur==pTabList->a[pLevel->iFrom].iCursor );
+ sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iTabCur);
}
- if( pLoop->wsFlags & WHERE_INDEXED ){
+ if( (ws & WHERE_INDEXED)
+ || ((ws & WHERE_MULTI_OR) && pLevel->u.pCovidx)
+ ){
sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iIdxCur);
}
if( pLevel->op==OP_Return ){
** the co-routine into OP_Copy of result contained in a register.
** OP_Rowid becomes OP_Null.
*/
- if( pTabItem->fg.viaCoroutine && !db->mallocFailed ){
- translateColumnToCopy(v, pLevel->addrBody, pLevel->iTabCur,
- pTabItem->regResult);
+ if( pTabItem->fg.viaCoroutine ){
+ testcase( pParse->db->mallocFailed );
+ translateColumnToCopy(pParse, pLevel->addrBody, pLevel->iTabCur,
+ pTabItem->regResult, 0);
continue;
}
- /* Close all of the cursors that were opened by sqlite3WhereBegin.
- ** Except, do not close cursors that will be reused by the OR optimization
- ** (WHERE_OMIT_OPEN_CLOSE). And do not close the OP_OpenWrite cursors
- ** created for the ONEPASS optimization.
- */
- if( (pTab->tabFlags & TF_Ephemeral)==0
- && pTab->pSelect==0
- && (pWInfo->wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0
- ){
- int ws = pLoop->wsFlags;
- if( pWInfo->eOnePass==ONEPASS_OFF && (ws & WHERE_IDX_ONLY)==0 ){
- sqlite3VdbeAddOp1(v, OP_Close, pTabItem->iCursor);
- }
- if( (ws & WHERE_INDEXED)!=0
- && (ws & (WHERE_IPK|WHERE_AUTO_INDEX))==0
- && pLevel->iIdxCur!=pWInfo->aiCurOnePass[1]
- ){
- sqlite3VdbeAddOp1(v, OP_Close, pLevel->iIdxCur);
- }
- }
-
/* If this scan uses an index, make VDBE code substitutions to read data
** from the index instead of from the table where possible. In some cases
** this optimization prevents the table from ever being read, which can
pOp = sqlite3VdbeGetOp(v, k);
for(; k<last; k++, pOp++){
if( pOp->p1!=pLevel->iTabCur ) continue;
- if( pOp->opcode==OP_Column ){
+ if( pOp->opcode==OP_Column
+#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC
+ || pOp->opcode==OP_Offset
+#endif
+ ){
int x = pOp->p2;
assert( pIdx->pTable==pTab );
if( !HasRowid(pTab) ){
pOp->p2 = x;
pOp->p1 = pLevel->iIdxCur;
}
- assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 || x>=0 );
+ assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 || x>=0
+ || pWInfo->eOnePass );
}else if( pOp->opcode==OP_Rowid ){
pOp->p1 = pLevel->iIdxCur;
pOp->opcode = OP_IdxRowid;
+ }else if( pOp->opcode==OP_IfNullRow ){
+ pOp->p1 = pLevel->iIdxCur;
}
}
}
/************** End of where.c ***********************************************/
/************** Begin file parse.c *******************************************/
-/* Driver template for the LEMON parser generator.
-** The author disclaims copyright to this source code.
+/*
+** 2000-05-29
**
-** This version of "lempar.c" is modified, slightly, for use by SQLite.
-** The only modifications are the addition of a couple of NEVER()
-** macros to disable tests that are needed in the case of a general
-** LALR(1) grammar but which are always false in the
-** specific grammar used by SQLite.
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Driver template for the LEMON parser generator.
+**
+** The "lemon" program processes an LALR(1) input grammar file, then uses
+** this template to construct a parser. The "lemon" program inserts text
+** at each "%%" line. Also, any "P-a-r-s-e" identifer prefix (without the
+** interstitial "-" characters) contained in this template is changed into
+** the value of the %name directive from the grammar. Otherwise, the content
+** of this template is copied straight through into the generate parser
+** source file.
+**
+** The following is the concatenation of all %include directives from the
+** input grammar file:
*/
-/* First off, code is included that follows the "include" declaration
-** in the input grammar file. */
/* #include <stdio.h> */
+/************ Begin %include sections from the grammar ************************/
/* #include "sqliteInt.h" */
#define yytestcase(X) testcase(X)
/*
-** An instance of this structure holds information about the
-** LIMIT clause of a SELECT statement.
+** Indicate that sqlite3ParserFree() will never be called with a null
+** pointer.
*/
-struct LimitVal {
- Expr *pLimit; /* The LIMIT expression. NULL if there is no limit */
- Expr *pOffset; /* The OFFSET expression. NULL if there is none */
-};
+#define YYPARSEFREENEVERNULL 1
/*
-** An instance of this structure is used to store the LIKE,
-** GLOB, NOT LIKE, and NOT GLOB operators.
+** In the amalgamation, the parse.c file generated by lemon and the
+** tokenize.c file are concatenated. In that case, sqlite3RunParser()
+** has access to the the size of the yyParser object and so the parser
+** engine can be allocated from stack. In that case, only the
+** sqlite3ParserInit() and sqlite3ParserFinalize() routines are invoked
+** and the sqlite3ParserAlloc() and sqlite3ParserFree() routines can be
+** omitted.
*/
-struct LikeOp {
- Token eOperator; /* "like" or "glob" or "regexp" */
- int bNot; /* True if the NOT keyword is present */
-};
+#ifdef SQLITE_AMALGAMATION
+# define sqlite3Parser_ENGINEALWAYSONSTACK 1
+#endif
+
+/*
+** Alternative datatype for the argument to the malloc() routine passed
+** into sqlite3ParserAlloc(). The default is size_t.
+*/
+#define YYMALLOCARGTYPE u64
/*
** An instance of the following structure describes the event of a
struct TrigEvent { int a; IdList * b; };
/*
-** An instance of this structure holds the ATTACH key and the key type.
+** Disable lookaside memory allocation for objects that might be
+** shared across database connections.
*/
-struct AttachKey { int type; Token key; };
+static void disableLookaside(Parse *pParse){
+ pParse->disableLookaside++;
+ pParse->db->lookaside.bDisable++;
+}
/*
}
}
- /* This is a utility routine used to set the ExprSpan.zStart and
- ** ExprSpan.zEnd values of pOut so that the span covers the complete
- ** range of text beginning with pStart and going to the end of pEnd.
- */
- static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){
- pOut->zStart = pStart->z;
- pOut->zEnd = &pEnd->z[pEnd->n];
- }
/* Construct a new Expr object from a single identifier. Use the
** new Expr to populate pOut. Set the span of pOut to be the identifier
** that created the expression.
*/
- static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token *pValue){
- pOut->pExpr = sqlite3PExpr(pParse, op, 0, 0, pValue);
- pOut->zStart = pValue->z;
- pOut->zEnd = &pValue->z[pValue->n];
- }
-
- /* This routine constructs a binary expression node out of two ExprSpan
- ** objects and uses the result to populate a new ExprSpan object.
- */
- static void spanBinaryExpr(
- ExprSpan *pOut, /* Write the result here */
- Parse *pParse, /* The parsing context. Errors accumulate here */
- int op, /* The binary operation */
- ExprSpan *pLeft, /* The left operand */
- ExprSpan *pRight /* The right operand */
- ){
- pOut->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr, 0);
- pOut->zStart = pLeft->zStart;
- pOut->zEnd = pRight->zEnd;
+ static Expr *tokenExpr(Parse *pParse, int op, Token t){
+ Expr *p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr)+t.n+1);
+ if( p ){
+ memset(p, 0, sizeof(Expr));
+ p->op = (u8)op;
+ p->flags = EP_Leaf;
+ p->iAgg = -1;
+ p->u.zToken = (char*)&p[1];
+ memcpy(p->u.zToken, t.z, t.n);
+ p->u.zToken[t.n] = 0;
+ if( sqlite3Isquote(p->u.zToken[0]) ){
+ if( p->u.zToken[0]=='"' ) p->flags |= EP_DblQuoted;
+ sqlite3Dequote(p->u.zToken);
+ }
+#if SQLITE_MAX_EXPR_DEPTH>0
+ p->nHeight = 1;
+#endif
+ }
+ return p;
}
- /* Construct an expression node for a unary postfix operator
- */
- static void spanUnaryPostfix(
- ExprSpan *pOut, /* Write the new expression node here */
- Parse *pParse, /* Parsing context to record errors */
- int op, /* The operator */
- ExprSpan *pOperand, /* The operand */
- Token *pPostOp /* The operand token for setting the span */
- ){
- pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0);
- pOut->zStart = pOperand->zStart;
- pOut->zEnd = &pPostOp->z[pPostOp->n];
- }
-
/* A routine to convert a binary TK_IS or TK_ISNOT expression into a
** unary TK_ISNULL or TK_NOTNULL expression. */
static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){
sqlite3 *db = pParse->db;
- if( pY && pA && pY->op==TK_NULL ){
+ if( pA && pY && pY->op==TK_NULL ){
pA->op = (u8)op;
sqlite3ExprDelete(db, pA->pRight);
pA->pRight = 0;
}
}
- /* Construct an expression node for a unary prefix operator
- */
- static void spanUnaryPrefix(
- ExprSpan *pOut, /* Write the new expression node here */
- Parse *pParse, /* Parsing context to record errors */
- int op, /* The operator */
- ExprSpan *pOperand, /* The operand */
- Token *pPreOp /* The operand token for setting the span */
- ){
- pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0, 0);
- pOut->zStart = pPreOp->z;
- pOut->zEnd = pOperand->zEnd;
- }
-
/* Add a single new term to an ExprList that is used to store a
** list of identifiers. Report an error if the ID list contains
** a COLLATE clause or an ASC or DESC keyword, except ignore the
sqlite3ExprListSetName(pParse, p, pIdToken, 1);
return p;
}
-/* Next is all token values, in a form suitable for use by makeheaders.
-** This section will be null unless lemon is run with the -m switch.
-*/
-/*
-** These constants (all generated automatically by the parser generator)
-** specify the various kinds of tokens (terminals) that the parser
-** understands.
-**
-** Each symbol here is a terminal symbol in the grammar.
-*/
-/* Make sure the INTERFACE macro is defined.
-*/
-#ifndef INTERFACE
-# define INTERFACE 1
-#endif
-/* The next thing included is series of defines which control
+/**************** End of %include directives **********************************/
+/* These constants specify the various numeric values for terminal symbols
+** in a format understandable to "makeheaders". This section is blank unless
+** "lemon" is run with the "-m" command-line option.
+***************** Begin makeheaders token definitions *************************/
+/**************** End makeheaders token definitions ***************************/
+
+/* The next sections is a series of control #defines.
** various aspects of the generated parser.
-** YYCODETYPE is the data type used for storing terminal
-** and nonterminal numbers. "unsigned char" is
-** used if there are fewer than 250 terminals
-** and nonterminals. "int" is used otherwise.
-** YYNOCODE is a number of type YYCODETYPE which corresponds
-** to no legal terminal or nonterminal number. This
-** number is used to fill in empty slots of the hash
-** table.
+** YYCODETYPE is the data type used to store the integer codes
+** that represent terminal and non-terminal symbols.
+** "unsigned char" is used if there are fewer than
+** 256 symbols. Larger types otherwise.
+** YYNOCODE is a number of type YYCODETYPE that is not used for
+** any terminal or nonterminal symbol.
** YYFALLBACK If defined, this indicates that one or more tokens
-** have fall-back values which should be used if the
-** original value of the token will not parse.
-** YYACTIONTYPE is the data type used for storing terminal
-** and nonterminal numbers. "unsigned char" is
-** used if there are fewer than 250 rules and
-** states combined. "int" is used otherwise.
-** sqlite3ParserTOKENTYPE is the data type used for minor tokens given
-** directly to the parser from the tokenizer.
-** YYMINORTYPE is the data type used for all minor tokens.
+** (also known as: "terminal symbols") have fall-back
+** values which should be used if the original symbol
+** would not parse. This permits keywords to sometimes
+** be used as identifiers, for example.
+** YYACTIONTYPE is the data type used for "action codes" - numbers
+** that indicate what to do in response to the next
+** token.
+** sqlite3ParserTOKENTYPE is the data type used for minor type for terminal
+** symbols. Background: A "minor type" is a semantic
+** value associated with a terminal or non-terminal
+** symbols. For example, for an "ID" terminal symbol,
+** the minor type might be the name of the identifier.
+** Each non-terminal can have a different minor type.
+** Terminal symbols all have the same minor type, though.
+** This macros defines the minor type for terminal
+** symbols.
+** YYMINORTYPE is the data type used for all minor types.
** This is typically a union of many types, one of
** which is sqlite3ParserTOKENTYPE. The entry in the union
-** for base tokens is called "yy0".
+** for terminal symbols is called "yy0".
** YYSTACKDEPTH is the maximum depth of the parser's stack. If
** zero the stack is dynamically sized using realloc()
** sqlite3ParserARG_SDECL A static variable declaration for the %extra_argument
** defined, then do no error processing.
** YYNSTATE the combined number of states.
** YYNRULE the number of rules in the grammar
+** YYNTOKEN Number of terminal symbols
** YY_MAX_SHIFT Maximum value for shift actions
** YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions
** YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions
-** YY_MIN_REDUCE Maximum value for reduce actions
** YY_ERROR_ACTION The yy_action[] code for syntax error
** YY_ACCEPT_ACTION The yy_action[] code for accept
** YY_NO_ACTION The yy_action[] code for no-op
+** YY_MIN_REDUCE Minimum value for reduce actions
+** YY_MAX_REDUCE Maximum value for reduce actions
*/
+#ifndef INTERFACE
+# define INTERFACE 1
+#endif
+/************* Begin control #defines *****************************************/
#define YYCODETYPE unsigned char
-#define YYNOCODE 254
+#define YYNOCODE 253
#define YYACTIONTYPE unsigned short int
-#define YYWILDCARD 70
+#define YYWILDCARD 83
#define sqlite3ParserTOKENTYPE Token
typedef union {
int yyinit;
sqlite3ParserTOKENTYPE yy0;
- Select* yy3;
- ExprList* yy14;
- With* yy59;
- SrcList* yy65;
- struct LikeOp yy96;
- Expr* yy132;
- u8 yy186;
- int yy328;
- ExprSpan yy346;
- struct TrigEvent yy378;
- u16 yy381;
- IdList* yy408;
- struct {int value; int mask;} yy429;
- TriggerStep* yy473;
- struct LimitVal yy476;
+ int yy4;
+ struct TrigEvent yy90;
+ TriggerStep* yy203;
+ struct {int value; int mask;} yy215;
+ SrcList* yy259;
+ Expr* yy314;
+ ExprList* yy322;
+ const char* yy336;
+ IdList* yy384;
+ Select* yy387;
+ With* yy451;
} YYMINORTYPE;
#ifndef YYSTACKDEPTH
#define YYSTACKDEPTH 100
#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse
#define sqlite3ParserARG_STORE yypParser->pParse = pParse
#define YYFALLBACK 1
-#define YYNSTATE 436
-#define YYNRULE 328
-#define YY_MAX_SHIFT 435
-#define YY_MIN_SHIFTREDUCE 649
-#define YY_MAX_SHIFTREDUCE 976
-#define YY_MIN_REDUCE 977
-#define YY_MAX_REDUCE 1304
-#define YY_ERROR_ACTION 1305
-#define YY_ACCEPT_ACTION 1306
-#define YY_NO_ACTION 1307
-
-/* The yyzerominor constant is used to initialize instances of
-** YYMINORTYPE objects to zero. */
-static const YYMINORTYPE yyzerominor = { 0 };
+#define YYNSTATE 466
+#define YYNRULE 330
+#define YYNTOKEN 143
+#define YY_MAX_SHIFT 465
+#define YY_MIN_SHIFTREDUCE 675
+#define YY_MAX_SHIFTREDUCE 1004
+#define YY_ERROR_ACTION 1005
+#define YY_ACCEPT_ACTION 1006
+#define YY_NO_ACTION 1007
+#define YY_MIN_REDUCE 1008
+#define YY_MAX_REDUCE 1337
+/************* End control #defines *******************************************/
/* Define the yytestcase() macro to be a no-op if is not already defined
** otherwise.
** N between YY_MIN_SHIFTREDUCE Shift to an arbitrary state then
** and YY_MAX_SHIFTREDUCE reduce by rule N-YY_MIN_SHIFTREDUCE.
**
-** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE
-** and YY_MAX_REDUCE
-
** N == YY_ERROR_ACTION A syntax error has occurred.
**
** N == YY_ACCEPT_ACTION The parser accepts its input.
** N == YY_NO_ACTION No such action. Denotes unused
** slots in the yy_action[] table.
**
+** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE
+** and YY_MAX_REDUCE
+**
** The action table is constructed as a single large table named yy_action[].
-** Given state S and lookahead X, the action is computed as
+** Given state S and lookahead X, the action is computed as either:
**
-** yy_action[ yy_shift_ofst[S] + X ]
+** (A) N = yy_action[ yy_shift_ofst[S] + X ]
+** (B) N = yy_default[S]
**
-** If the index value yy_shift_ofst[S]+X is out of range or if the value
-** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X or if yy_shift_ofst[S]
-** is equal to YY_SHIFT_USE_DFLT, it means that the action is not in the table
-** and that yy_default[S] should be used instead.
+** The (A) formula is preferred. The B formula is used instead if
+** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X.
**
-** The formula above is for computing the action when the lookahead is
+** The formulas above are for computing the action when the lookahead is
** a terminal symbol. If the lookahead is a non-terminal (as occurs after
** a reduce action) then the yy_reduce_ofst[] array is used in place of
-** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of
-** YY_SHIFT_USE_DFLT.
+** the yy_shift_ofst[] array.
**
** The following are the tables generated in this section:
**
** yy_reduce_ofst[] For each state, the offset into yy_action for
** shifting non-terminals after a reduce.
** yy_default[] Default action for each state.
-*/
-#define YY_ACTTAB_COUNT (1501)
+**
+*********** Begin parsing tables **********************************************/
+#define YY_ACTTAB_COUNT (1541)
static const YYACTIONTYPE yy_action[] = {
- /* 0 */ 311, 1306, 145, 651, 2, 192, 652, 338, 780, 92,
- /* 10 */ 92, 92, 92, 85, 90, 90, 90, 90, 89, 89,
- /* 20 */ 88, 88, 88, 87, 335, 88, 88, 88, 87, 335,
- /* 30 */ 327, 856, 856, 92, 92, 92, 92, 776, 90, 90,
- /* 40 */ 90, 90, 89, 89, 88, 88, 88, 87, 335, 86,
- /* 50 */ 83, 166, 93, 94, 84, 868, 871, 860, 860, 91,
- /* 60 */ 91, 92, 92, 92, 92, 335, 90, 90, 90, 90,
- /* 70 */ 89, 89, 88, 88, 88, 87, 335, 311, 780, 90,
- /* 80 */ 90, 90, 90, 89, 89, 88, 88, 88, 87, 335,
- /* 90 */ 123, 808, 689, 689, 689, 689, 112, 230, 430, 257,
- /* 100 */ 809, 698, 430, 86, 83, 166, 324, 55, 856, 856,
- /* 110 */ 201, 158, 276, 387, 271, 386, 188, 689, 689, 828,
- /* 120 */ 833, 49, 944, 269, 833, 49, 123, 87, 335, 93,
- /* 130 */ 94, 84, 868, 871, 860, 860, 91, 91, 92, 92,
- /* 140 */ 92, 92, 342, 90, 90, 90, 90, 89, 89, 88,
- /* 150 */ 88, 88, 87, 335, 311, 328, 333, 332, 701, 408,
- /* 160 */ 394, 69, 690, 691, 690, 691, 715, 910, 251, 354,
- /* 170 */ 250, 698, 704, 430, 908, 430, 909, 89, 89, 88,
- /* 180 */ 88, 88, 87, 335, 391, 856, 856, 690, 691, 183,
- /* 190 */ 95, 340, 384, 381, 380, 833, 31, 833, 49, 912,
- /* 200 */ 912, 333, 332, 379, 123, 311, 93, 94, 84, 868,
- /* 210 */ 871, 860, 860, 91, 91, 92, 92, 92, 92, 114,
- /* 220 */ 90, 90, 90, 90, 89, 89, 88, 88, 88, 87,
- /* 230 */ 335, 430, 408, 399, 435, 657, 856, 856, 346, 57,
- /* 240 */ 232, 828, 109, 20, 912, 912, 231, 393, 937, 760,
- /* 250 */ 97, 751, 752, 833, 49, 708, 708, 93, 94, 84,
- /* 260 */ 868, 871, 860, 860, 91, 91, 92, 92, 92, 92,
- /* 270 */ 707, 90, 90, 90, 90, 89, 89, 88, 88, 88,
- /* 280 */ 87, 335, 311, 114, 22, 706, 688, 58, 408, 390,
- /* 290 */ 251, 349, 240, 749, 752, 689, 689, 847, 685, 115,
- /* 300 */ 21, 231, 393, 689, 689, 697, 183, 355, 430, 384,
- /* 310 */ 381, 380, 192, 856, 856, 780, 123, 160, 159, 223,
- /* 320 */ 379, 738, 25, 315, 362, 841, 143, 689, 689, 835,
- /* 330 */ 833, 48, 339, 937, 93, 94, 84, 868, 871, 860,
- /* 340 */ 860, 91, 91, 92, 92, 92, 92, 914, 90, 90,
- /* 350 */ 90, 90, 89, 89, 88, 88, 88, 87, 335, 311,
- /* 360 */ 840, 840, 840, 266, 430, 690, 691, 778, 114, 1300,
- /* 370 */ 1300, 430, 1, 690, 691, 697, 688, 689, 689, 689,
- /* 380 */ 689, 689, 689, 287, 298, 780, 833, 10, 686, 115,
- /* 390 */ 856, 856, 355, 833, 10, 828, 366, 690, 691, 363,
- /* 400 */ 321, 76, 123, 74, 23, 737, 807, 323, 356, 353,
- /* 410 */ 847, 93, 94, 84, 868, 871, 860, 860, 91, 91,
- /* 420 */ 92, 92, 92, 92, 940, 90, 90, 90, 90, 89,
- /* 430 */ 89, 88, 88, 88, 87, 335, 311, 806, 841, 429,
- /* 440 */ 713, 941, 835, 430, 251, 354, 250, 690, 691, 690,
- /* 450 */ 691, 690, 691, 86, 83, 166, 24, 942, 151, 753,
- /* 460 */ 285, 907, 403, 907, 164, 833, 10, 856, 856, 965,
- /* 470 */ 306, 754, 679, 840, 840, 840, 795, 216, 794, 222,
- /* 480 */ 906, 344, 906, 904, 86, 83, 166, 286, 93, 94,
- /* 490 */ 84, 868, 871, 860, 860, 91, 91, 92, 92, 92,
- /* 500 */ 92, 430, 90, 90, 90, 90, 89, 89, 88, 88,
- /* 510 */ 88, 87, 335, 311, 430, 724, 352, 705, 427, 699,
- /* 520 */ 700, 376, 210, 833, 49, 793, 397, 857, 857, 940,
- /* 530 */ 213, 762, 727, 334, 699, 700, 833, 10, 86, 83,
- /* 540 */ 166, 345, 396, 902, 856, 856, 941, 385, 833, 9,
- /* 550 */ 406, 869, 872, 187, 890, 728, 347, 398, 404, 977,
- /* 560 */ 652, 338, 942, 954, 413, 93, 94, 84, 868, 871,
- /* 570 */ 860, 860, 91, 91, 92, 92, 92, 92, 861, 90,
- /* 580 */ 90, 90, 90, 89, 89, 88, 88, 88, 87, 335,
- /* 590 */ 311, 1219, 114, 430, 834, 430, 5, 165, 192, 688,
- /* 600 */ 832, 780, 430, 723, 430, 234, 325, 189, 163, 316,
- /* 610 */ 356, 955, 115, 235, 269, 833, 35, 833, 36, 747,
- /* 620 */ 720, 856, 856, 793, 833, 12, 833, 27, 745, 174,
- /* 630 */ 968, 1290, 968, 1291, 1290, 310, 1291, 693, 317, 245,
- /* 640 */ 264, 311, 93, 94, 84, 868, 871, 860, 860, 91,
- /* 650 */ 91, 92, 92, 92, 92, 832, 90, 90, 90, 90,
- /* 660 */ 89, 89, 88, 88, 88, 87, 335, 430, 320, 213,
- /* 670 */ 762, 780, 856, 856, 920, 920, 369, 257, 966, 220,
- /* 680 */ 966, 396, 663, 664, 665, 242, 259, 244, 262, 833,
- /* 690 */ 37, 650, 2, 93, 94, 84, 868, 871, 860, 860,
- /* 700 */ 91, 91, 92, 92, 92, 92, 430, 90, 90, 90,
- /* 710 */ 90, 89, 89, 88, 88, 88, 87, 335, 311, 430,
- /* 720 */ 239, 430, 917, 368, 430, 238, 916, 793, 833, 38,
- /* 730 */ 430, 825, 430, 66, 430, 392, 430, 766, 766, 430,
- /* 740 */ 367, 833, 39, 833, 28, 430, 833, 29, 68, 856,
- /* 750 */ 856, 900, 833, 40, 833, 41, 833, 42, 833, 11,
- /* 760 */ 72, 833, 43, 243, 305, 970, 114, 833, 99, 961,
- /* 770 */ 93, 94, 84, 868, 871, 860, 860, 91, 91, 92,
- /* 780 */ 92, 92, 92, 430, 90, 90, 90, 90, 89, 89,
- /* 790 */ 88, 88, 88, 87, 335, 311, 430, 361, 430, 165,
- /* 800 */ 147, 430, 186, 185, 184, 833, 44, 430, 289, 430,
- /* 810 */ 246, 430, 971, 430, 212, 163, 430, 357, 833, 45,
- /* 820 */ 833, 32, 932, 833, 46, 793, 856, 856, 718, 833,
- /* 830 */ 47, 833, 33, 833, 117, 833, 118, 75, 833, 119,
- /* 840 */ 288, 305, 967, 214, 935, 322, 311, 93, 94, 84,
- /* 850 */ 868, 871, 860, 860, 91, 91, 92, 92, 92, 92,
- /* 860 */ 430, 90, 90, 90, 90, 89, 89, 88, 88, 88,
- /* 870 */ 87, 335, 430, 832, 426, 317, 288, 856, 856, 114,
- /* 880 */ 763, 257, 833, 53, 930, 219, 364, 257, 257, 971,
- /* 890 */ 361, 396, 257, 257, 833, 34, 257, 311, 93, 94,
- /* 900 */ 84, 868, 871, 860, 860, 91, 91, 92, 92, 92,
- /* 910 */ 92, 430, 90, 90, 90, 90, 89, 89, 88, 88,
- /* 920 */ 88, 87, 335, 430, 217, 318, 124, 253, 856, 856,
- /* 930 */ 218, 943, 257, 833, 100, 898, 759, 774, 361, 755,
- /* 940 */ 423, 329, 758, 1017, 289, 833, 50, 682, 311, 93,
- /* 950 */ 82, 84, 868, 871, 860, 860, 91, 91, 92, 92,
- /* 960 */ 92, 92, 430, 90, 90, 90, 90, 89, 89, 88,
- /* 970 */ 88, 88, 87, 335, 430, 256, 419, 114, 249, 856,
- /* 980 */ 856, 331, 114, 400, 833, 101, 359, 187, 1064, 726,
- /* 990 */ 725, 739, 401, 416, 420, 360, 833, 102, 424, 311,
- /* 1000 */ 258, 94, 84, 868, 871, 860, 860, 91, 91, 92,
- /* 1010 */ 92, 92, 92, 430, 90, 90, 90, 90, 89, 89,
- /* 1020 */ 88, 88, 88, 87, 335, 430, 221, 261, 114, 114,
- /* 1030 */ 856, 856, 808, 114, 156, 833, 98, 772, 733, 734,
- /* 1040 */ 275, 809, 771, 316, 263, 265, 960, 833, 116, 307,
- /* 1050 */ 741, 274, 722, 84, 868, 871, 860, 860, 91, 91,
- /* 1060 */ 92, 92, 92, 92, 430, 90, 90, 90, 90, 89,
- /* 1070 */ 89, 88, 88, 88, 87, 335, 80, 425, 830, 3,
- /* 1080 */ 1214, 191, 430, 721, 336, 336, 833, 113, 252, 80,
- /* 1090 */ 425, 68, 3, 913, 913, 428, 270, 336, 336, 430,
- /* 1100 */ 377, 784, 430, 197, 833, 106, 430, 716, 428, 430,
- /* 1110 */ 267, 430, 897, 68, 414, 430, 769, 409, 430, 71,
- /* 1120 */ 430, 833, 105, 123, 833, 103, 847, 414, 833, 49,
- /* 1130 */ 843, 833, 104, 833, 52, 800, 123, 833, 54, 847,
- /* 1140 */ 833, 51, 833, 26, 831, 802, 77, 78, 191, 389,
- /* 1150 */ 430, 372, 114, 79, 432, 431, 911, 911, 835, 77,
- /* 1160 */ 78, 779, 893, 408, 410, 197, 79, 432, 431, 791,
- /* 1170 */ 226, 835, 833, 30, 772, 80, 425, 716, 3, 771,
- /* 1180 */ 411, 412, 897, 336, 336, 290, 291, 839, 703, 840,
- /* 1190 */ 840, 840, 842, 19, 428, 695, 684, 672, 111, 671,
- /* 1200 */ 843, 673, 840, 840, 840, 842, 19, 207, 661, 278,
- /* 1210 */ 148, 304, 280, 414, 282, 6, 822, 348, 248, 241,
- /* 1220 */ 358, 934, 720, 80, 425, 847, 3, 161, 382, 273,
- /* 1230 */ 284, 336, 336, 415, 296, 958, 895, 894, 157, 674,
- /* 1240 */ 107, 194, 428, 948, 135, 77, 78, 777, 953, 951,
- /* 1250 */ 56, 319, 79, 432, 431, 121, 66, 835, 59, 128,
- /* 1260 */ 146, 414, 350, 130, 351, 819, 131, 132, 133, 375,
- /* 1270 */ 173, 149, 138, 847, 936, 365, 178, 70, 425, 827,
- /* 1280 */ 3, 889, 62, 371, 915, 336, 336, 792, 840, 840,
- /* 1290 */ 840, 842, 19, 77, 78, 208, 428, 144, 179, 373,
- /* 1300 */ 79, 432, 431, 255, 180, 835, 260, 675, 181, 308,
- /* 1310 */ 388, 744, 326, 743, 742, 414, 731, 718, 712, 402,
- /* 1320 */ 309, 711, 788, 65, 277, 272, 789, 847, 730, 710,
- /* 1330 */ 709, 279, 193, 787, 281, 876, 840, 840, 840, 842,
- /* 1340 */ 19, 786, 283, 73, 418, 330, 422, 77, 78, 227,
- /* 1350 */ 96, 407, 67, 405, 79, 432, 431, 292, 228, 835,
- /* 1360 */ 215, 202, 229, 293, 767, 303, 302, 301, 204, 299,
- /* 1370 */ 294, 295, 676, 7, 681, 433, 669, 206, 110, 224,
- /* 1380 */ 203, 205, 434, 667, 666, 658, 120, 168, 656, 237,
- /* 1390 */ 840, 840, 840, 842, 19, 337, 155, 233, 236, 341,
- /* 1400 */ 167, 905, 108, 313, 903, 826, 314, 125, 126, 127,
- /* 1410 */ 129, 170, 247, 756, 172, 928, 134, 136, 171, 60,
- /* 1420 */ 61, 123, 169, 137, 175, 933, 176, 927, 8, 13,
- /* 1430 */ 177, 254, 191, 918, 139, 370, 924, 140, 678, 150,
- /* 1440 */ 374, 274, 182, 378, 141, 122, 63, 14, 383, 729,
- /* 1450 */ 268, 15, 64, 225, 846, 845, 874, 16, 765, 770,
- /* 1460 */ 4, 162, 209, 395, 211, 142, 878, 796, 801, 312,
- /* 1470 */ 190, 71, 68, 875, 873, 939, 199, 938, 17, 195,
- /* 1480 */ 18, 196, 417, 975, 152, 653, 976, 198, 153, 421,
- /* 1490 */ 877, 154, 200, 844, 696, 81, 343, 297, 1019, 1018,
- /* 1500 */ 300,
+ /* 0 */ 1006, 156, 156, 2, 1302, 90, 87, 179, 90, 87,
+ /* 10 */ 179, 460, 1048, 460, 465, 1010, 460, 333, 1130, 335,
+ /* 20 */ 246, 330, 112, 303, 439, 1258, 304, 419, 1129, 1087,
+ /* 30 */ 72, 798, 50, 50, 50, 50, 331, 30, 30, 799,
+ /* 40 */ 951, 364, 371, 97, 98, 88, 983, 983, 859, 862,
+ /* 50 */ 851, 851, 95, 95, 96, 96, 96, 96, 120, 371,
+ /* 60 */ 370, 120, 348, 22, 90, 87, 179, 438, 423, 438,
+ /* 70 */ 440, 335, 420, 385, 90, 87, 179, 116, 73, 163,
+ /* 80 */ 848, 848, 860, 863, 94, 94, 94, 94, 93, 93,
+ /* 90 */ 92, 92, 92, 91, 361, 97, 98, 88, 983, 983,
+ /* 100 */ 859, 862, 851, 851, 95, 95, 96, 96, 96, 96,
+ /* 110 */ 718, 365, 339, 93, 93, 92, 92, 92, 91, 361,
+ /* 120 */ 99, 371, 453, 335, 94, 94, 94, 94, 93, 93,
+ /* 130 */ 92, 92, 92, 91, 361, 852, 94, 94, 94, 94,
+ /* 140 */ 93, 93, 92, 92, 92, 91, 361, 97, 98, 88,
+ /* 150 */ 983, 983, 859, 862, 851, 851, 95, 95, 96, 96,
+ /* 160 */ 96, 96, 92, 92, 92, 91, 361, 838, 132, 195,
+ /* 170 */ 58, 244, 412, 409, 408, 335, 457, 457, 457, 304,
+ /* 180 */ 59, 332, 831, 407, 394, 962, 830, 391, 94, 94,
+ /* 190 */ 94, 94, 93, 93, 92, 92, 92, 91, 361, 97,
+ /* 200 */ 98, 88, 983, 983, 859, 862, 851, 851, 95, 95,
+ /* 210 */ 96, 96, 96, 96, 426, 357, 460, 830, 830, 832,
+ /* 220 */ 91, 361, 962, 963, 964, 195, 459, 335, 412, 409,
+ /* 230 */ 408, 280, 361, 820, 132, 11, 11, 50, 50, 407,
+ /* 240 */ 94, 94, 94, 94, 93, 93, 92, 92, 92, 91,
+ /* 250 */ 361, 97, 98, 88, 983, 983, 859, 862, 851, 851,
+ /* 260 */ 95, 95, 96, 96, 96, 96, 460, 221, 460, 264,
+ /* 270 */ 375, 254, 438, 428, 1276, 1276, 383, 1074, 1053, 335,
+ /* 280 */ 245, 422, 299, 713, 271, 271, 1074, 50, 50, 50,
+ /* 290 */ 50, 962, 94, 94, 94, 94, 93, 93, 92, 92,
+ /* 300 */ 92, 91, 361, 97, 98, 88, 983, 983, 859, 862,
+ /* 310 */ 851, 851, 95, 95, 96, 96, 96, 96, 90, 87,
+ /* 320 */ 179, 1306, 438, 437, 438, 418, 368, 253, 962, 963,
+ /* 330 */ 964, 335, 360, 360, 360, 706, 359, 358, 324, 962,
+ /* 340 */ 1281, 951, 364, 230, 94, 94, 94, 94, 93, 93,
+ /* 350 */ 92, 92, 92, 91, 361, 97, 98, 88, 983, 983,
+ /* 360 */ 859, 862, 851, 851, 95, 95, 96, 96, 96, 96,
+ /* 370 */ 769, 460, 120, 226, 226, 366, 962, 963, 964, 1089,
+ /* 380 */ 990, 900, 990, 335, 1057, 425, 421, 839, 759, 759,
+ /* 390 */ 425, 427, 50, 50, 432, 381, 94, 94, 94, 94,
+ /* 400 */ 93, 93, 92, 92, 92, 91, 361, 97, 98, 88,
+ /* 410 */ 983, 983, 859, 862, 851, 851, 95, 95, 96, 96,
+ /* 420 */ 96, 96, 460, 259, 460, 120, 117, 354, 942, 1332,
+ /* 430 */ 942, 1333, 1332, 278, 1333, 335, 680, 681, 682, 825,
+ /* 440 */ 201, 176, 303, 50, 50, 49, 49, 404, 94, 94,
+ /* 450 */ 94, 94, 93, 93, 92, 92, 92, 91, 361, 97,
+ /* 460 */ 98, 88, 983, 983, 859, 862, 851, 851, 95, 95,
+ /* 470 */ 96, 96, 96, 96, 199, 460, 380, 265, 433, 380,
+ /* 480 */ 265, 383, 256, 158, 258, 319, 1003, 335, 155, 940,
+ /* 490 */ 177, 940, 273, 379, 276, 322, 34, 34, 302, 962,
+ /* 500 */ 94, 94, 94, 94, 93, 93, 92, 92, 92, 91,
+ /* 510 */ 361, 97, 98, 88, 983, 983, 859, 862, 851, 851,
+ /* 520 */ 95, 95, 96, 96, 96, 96, 905, 905, 397, 460,
+ /* 530 */ 301, 158, 101, 319, 941, 340, 962, 963, 964, 313,
+ /* 540 */ 283, 449, 335, 327, 146, 1266, 1004, 257, 234, 248,
+ /* 550 */ 35, 35, 94, 94, 94, 94, 93, 93, 92, 92,
+ /* 560 */ 92, 91, 361, 709, 785, 1227, 97, 98, 88, 983,
+ /* 570 */ 983, 859, 862, 851, 851, 95, 95, 96, 96, 96,
+ /* 580 */ 96, 962, 1227, 1229, 245, 422, 838, 198, 197, 196,
+ /* 590 */ 1079, 1079, 1077, 1077, 1004, 1334, 320, 335, 172, 171,
+ /* 600 */ 709, 831, 159, 271, 271, 830, 76, 94, 94, 94,
+ /* 610 */ 94, 93, 93, 92, 92, 92, 91, 361, 962, 963,
+ /* 620 */ 964, 97, 98, 88, 983, 983, 859, 862, 851, 851,
+ /* 630 */ 95, 95, 96, 96, 96, 96, 830, 830, 832, 1157,
+ /* 640 */ 1157, 199, 1157, 173, 1227, 231, 232, 1282, 2, 335,
+ /* 650 */ 271, 764, 271, 820, 271, 271, 763, 389, 389, 389,
+ /* 660 */ 132, 79, 94, 94, 94, 94, 93, 93, 92, 92,
+ /* 670 */ 92, 91, 361, 97, 98, 88, 983, 983, 859, 862,
+ /* 680 */ 851, 851, 95, 95, 96, 96, 96, 96, 460, 264,
+ /* 690 */ 223, 460, 1257, 783, 1223, 1157, 1086, 1082, 80, 271,
+ /* 700 */ 78, 335, 340, 1031, 341, 344, 345, 902, 346, 10,
+ /* 710 */ 10, 902, 25, 25, 94, 94, 94, 94, 93, 93,
+ /* 720 */ 92, 92, 92, 91, 361, 97, 86, 88, 983, 983,
+ /* 730 */ 859, 862, 851, 851, 95, 95, 96, 96, 96, 96,
+ /* 740 */ 1157, 270, 395, 117, 233, 263, 235, 70, 456, 341,
+ /* 750 */ 225, 176, 335, 1305, 342, 133, 736, 966, 980, 249,
+ /* 760 */ 1150, 396, 325, 1085, 1028, 178, 94, 94, 94, 94,
+ /* 770 */ 93, 93, 92, 92, 92, 91, 361, 98, 88, 983,
+ /* 780 */ 983, 859, 862, 851, 851, 95, 95, 96, 96, 96,
+ /* 790 */ 96, 783, 783, 132, 120, 966, 120, 120, 120, 798,
+ /* 800 */ 252, 937, 335, 353, 321, 429, 355, 799, 822, 692,
+ /* 810 */ 390, 203, 446, 450, 372, 716, 454, 94, 94, 94,
+ /* 820 */ 94, 93, 93, 92, 92, 92, 91, 361, 88, 983,
+ /* 830 */ 983, 859, 862, 851, 851, 95, 95, 96, 96, 96,
+ /* 840 */ 96, 84, 455, 1225, 3, 1209, 120, 120, 382, 387,
+ /* 850 */ 120, 203, 1271, 716, 384, 168, 266, 203, 458, 72,
+ /* 860 */ 260, 1246, 84, 455, 178, 3, 378, 94, 94, 94,
+ /* 870 */ 94, 93, 93, 92, 92, 92, 91, 361, 350, 458,
+ /* 880 */ 1245, 362, 430, 213, 228, 290, 415, 285, 414, 200,
+ /* 890 */ 783, 882, 444, 726, 725, 405, 283, 921, 209, 921,
+ /* 900 */ 281, 132, 362, 72, 838, 289, 147, 733, 734, 392,
+ /* 910 */ 81, 82, 922, 444, 922, 267, 288, 83, 362, 462,
+ /* 920 */ 461, 272, 132, 830, 23, 838, 388, 923, 1216, 923,
+ /* 930 */ 1056, 81, 82, 84, 455, 899, 3, 899, 83, 362,
+ /* 940 */ 462, 461, 761, 962, 830, 75, 1, 443, 275, 747,
+ /* 950 */ 458, 5, 962, 204, 830, 830, 832, 833, 18, 748,
+ /* 960 */ 229, 962, 277, 19, 153, 317, 317, 316, 216, 314,
+ /* 970 */ 279, 460, 689, 362, 1055, 830, 830, 832, 833, 18,
+ /* 980 */ 962, 963, 964, 962, 444, 181, 460, 251, 981, 962,
+ /* 990 */ 963, 964, 8, 8, 20, 250, 838, 1070, 962, 963,
+ /* 1000 */ 964, 417, 81, 82, 768, 204, 347, 36, 36, 83,
+ /* 1010 */ 362, 462, 461, 1054, 284, 830, 84, 455, 1123, 3,
+ /* 1020 */ 962, 963, 964, 460, 183, 962, 981, 764, 889, 1107,
+ /* 1030 */ 460, 184, 763, 458, 132, 182, 74, 455, 460, 3,
+ /* 1040 */ 981, 898, 834, 898, 8, 8, 830, 830, 832, 833,
+ /* 1050 */ 18, 8, 8, 458, 219, 1156, 362, 1103, 349, 8,
+ /* 1060 */ 8, 240, 962, 963, 964, 236, 889, 444, 792, 336,
+ /* 1070 */ 158, 203, 885, 435, 700, 209, 362, 114, 981, 838,
+ /* 1080 */ 834, 227, 334, 1114, 441, 81, 82, 444, 442, 305,
+ /* 1090 */ 784, 306, 83, 362, 462, 461, 369, 1162, 830, 838,
+ /* 1100 */ 460, 1037, 237, 1030, 237, 81, 82, 7, 96, 96,
+ /* 1110 */ 96, 96, 83, 362, 462, 461, 1019, 1018, 830, 1020,
+ /* 1120 */ 1289, 37, 37, 400, 96, 96, 96, 96, 89, 830,
+ /* 1130 */ 830, 832, 833, 18, 1100, 318, 962, 292, 94, 94,
+ /* 1140 */ 94, 94, 93, 93, 92, 92, 92, 91, 361, 830,
+ /* 1150 */ 830, 832, 833, 18, 94, 94, 94, 94, 93, 93,
+ /* 1160 */ 92, 92, 92, 91, 361, 359, 358, 226, 226, 727,
+ /* 1170 */ 294, 296, 460, 962, 963, 964, 460, 989, 160, 425,
+ /* 1180 */ 170, 1295, 262, 460, 987, 374, 988, 386, 1145, 255,
+ /* 1190 */ 326, 460, 373, 38, 38, 410, 174, 39, 39, 413,
+ /* 1200 */ 460, 287, 460, 1053, 40, 40, 298, 728, 1220, 990,
+ /* 1210 */ 445, 990, 26, 26, 1219, 460, 311, 460, 169, 1292,
+ /* 1220 */ 460, 27, 27, 29, 29, 998, 460, 206, 135, 995,
+ /* 1230 */ 1265, 1263, 460, 57, 60, 460, 41, 41, 42, 42,
+ /* 1240 */ 460, 43, 43, 460, 343, 351, 460, 9, 9, 460,
+ /* 1250 */ 144, 460, 130, 44, 44, 460, 103, 103, 460, 137,
+ /* 1260 */ 70, 45, 45, 460, 46, 46, 460, 31, 31, 1142,
+ /* 1270 */ 47, 47, 48, 48, 460, 376, 32, 32, 460, 122,
+ /* 1280 */ 122, 460, 157, 460, 123, 123, 139, 124, 124, 460,
+ /* 1290 */ 186, 460, 377, 460, 115, 54, 54, 460, 403, 33,
+ /* 1300 */ 33, 460, 104, 104, 51, 51, 460, 161, 460, 140,
+ /* 1310 */ 105, 105, 106, 106, 102, 102, 460, 141, 121, 121,
+ /* 1320 */ 460, 142, 119, 119, 190, 460, 1152, 110, 110, 109,
+ /* 1330 */ 109, 702, 460, 148, 393, 65, 460, 107, 107, 460,
+ /* 1340 */ 323, 108, 108, 399, 460, 1234, 53, 53, 1214, 269,
+ /* 1350 */ 154, 416, 1115, 55, 55, 220, 401, 52, 52, 191,
+ /* 1360 */ 24, 24, 274, 192, 193, 28, 28, 1021, 328, 702,
+ /* 1370 */ 1073, 352, 1072, 718, 1071, 431, 1111, 1064, 329, 1045,
+ /* 1380 */ 69, 205, 6, 291, 1044, 286, 1112, 1043, 1304, 1110,
+ /* 1390 */ 293, 300, 295, 297, 1063, 1200, 1109, 77, 241, 448,
+ /* 1400 */ 356, 452, 436, 100, 214, 71, 434, 1027, 1093, 21,
+ /* 1410 */ 463, 242, 243, 957, 215, 217, 218, 464, 309, 307,
+ /* 1420 */ 308, 310, 1016, 125, 1250, 1251, 1011, 1249, 126, 127,
+ /* 1430 */ 1248, 113, 676, 337, 238, 338, 134, 363, 167, 1041,
+ /* 1440 */ 1040, 56, 247, 367, 180, 897, 111, 895, 136, 1038,
+ /* 1450 */ 818, 128, 138, 750, 261, 911, 185, 143, 145, 61,
+ /* 1460 */ 62, 63, 64, 129, 914, 187, 188, 910, 118, 12,
+ /* 1470 */ 189, 903, 268, 992, 203, 162, 398, 150, 149, 691,
+ /* 1480 */ 402, 288, 194, 406, 151, 411, 66, 13, 729, 239,
+ /* 1490 */ 282, 14, 67, 131, 837, 836, 865, 758, 15, 4,
+ /* 1500 */ 68, 762, 175, 222, 224, 424, 152, 869, 791, 202,
+ /* 1510 */ 786, 75, 72, 880, 866, 864, 16, 17, 920, 207,
+ /* 1520 */ 919, 208, 447, 946, 164, 211, 947, 210, 165, 451,
+ /* 1530 */ 868, 166, 315, 835, 701, 85, 212, 1297, 312, 952,
+ /* 1540 */ 1296,
};
static const YYCODETYPE yy_lookahead[] = {
- /* 0 */ 19, 144, 145, 146, 147, 24, 1, 2, 27, 80,
- /* 10 */ 81, 82, 83, 84, 85, 86, 87, 88, 89, 90,
- /* 20 */ 91, 92, 93, 94, 95, 91, 92, 93, 94, 95,
- /* 30 */ 19, 50, 51, 80, 81, 82, 83, 212, 85, 86,
- /* 40 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 224,
- /* 50 */ 225, 226, 71, 72, 73, 74, 75, 76, 77, 78,
- /* 60 */ 79, 80, 81, 82, 83, 95, 85, 86, 87, 88,
- /* 70 */ 89, 90, 91, 92, 93, 94, 95, 19, 97, 85,
- /* 80 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
- /* 90 */ 66, 33, 27, 28, 27, 28, 22, 201, 152, 152,
- /* 100 */ 42, 27, 152, 224, 225, 226, 95, 211, 50, 51,
- /* 110 */ 99, 100, 101, 102, 103, 104, 105, 27, 28, 59,
- /* 120 */ 174, 175, 243, 112, 174, 175, 66, 94, 95, 71,
- /* 130 */ 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,
- /* 140 */ 82, 83, 195, 85, 86, 87, 88, 89, 90, 91,
- /* 150 */ 92, 93, 94, 95, 19, 209, 89, 90, 173, 209,
- /* 160 */ 210, 26, 97, 98, 97, 98, 181, 100, 108, 109,
- /* 170 */ 110, 97, 174, 152, 107, 152, 109, 89, 90, 91,
- /* 180 */ 92, 93, 94, 95, 163, 50, 51, 97, 98, 99,
- /* 190 */ 55, 244, 102, 103, 104, 174, 175, 174, 175, 132,
- /* 200 */ 133, 89, 90, 113, 66, 19, 71, 72, 73, 74,
- /* 210 */ 75, 76, 77, 78, 79, 80, 81, 82, 83, 198,
- /* 220 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94,
- /* 230 */ 95, 152, 209, 210, 148, 149, 50, 51, 100, 53,
- /* 240 */ 154, 59, 156, 22, 132, 133, 119, 120, 163, 163,
- /* 250 */ 22, 192, 193, 174, 175, 27, 28, 71, 72, 73,
- /* 260 */ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
- /* 270 */ 174, 85, 86, 87, 88, 89, 90, 91, 92, 93,
- /* 280 */ 94, 95, 19, 198, 198, 174, 152, 24, 209, 210,
- /* 290 */ 108, 109, 110, 192, 193, 27, 28, 69, 164, 165,
- /* 300 */ 79, 119, 120, 27, 28, 27, 99, 222, 152, 102,
- /* 310 */ 103, 104, 24, 50, 51, 27, 66, 89, 90, 185,
- /* 320 */ 113, 187, 22, 157, 239, 97, 58, 27, 28, 101,
- /* 330 */ 174, 175, 246, 163, 71, 72, 73, 74, 75, 76,
- /* 340 */ 77, 78, 79, 80, 81, 82, 83, 11, 85, 86,
- /* 350 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 19,
- /* 360 */ 132, 133, 134, 23, 152, 97, 98, 91, 198, 119,
- /* 370 */ 120, 152, 22, 97, 98, 97, 152, 27, 28, 27,
- /* 380 */ 28, 27, 28, 227, 160, 97, 174, 175, 164, 165,
- /* 390 */ 50, 51, 222, 174, 175, 59, 230, 97, 98, 233,
- /* 400 */ 188, 137, 66, 139, 234, 187, 177, 188, 152, 239,
- /* 410 */ 69, 71, 72, 73, 74, 75, 76, 77, 78, 79,
- /* 420 */ 80, 81, 82, 83, 12, 85, 86, 87, 88, 89,
- /* 430 */ 90, 91, 92, 93, 94, 95, 19, 177, 97, 152,
- /* 440 */ 23, 29, 101, 152, 108, 109, 110, 97, 98, 97,
- /* 450 */ 98, 97, 98, 224, 225, 226, 22, 45, 24, 47,
- /* 460 */ 152, 152, 152, 152, 152, 174, 175, 50, 51, 249,
- /* 470 */ 250, 59, 21, 132, 133, 134, 124, 221, 124, 188,
- /* 480 */ 171, 172, 171, 172, 224, 225, 226, 152, 71, 72,
- /* 490 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82,
- /* 500 */ 83, 152, 85, 86, 87, 88, 89, 90, 91, 92,
- /* 510 */ 93, 94, 95, 19, 152, 183, 65, 23, 170, 171,
- /* 520 */ 172, 19, 23, 174, 175, 26, 152, 50, 51, 12,
- /* 530 */ 196, 197, 37, 170, 171, 172, 174, 175, 224, 225,
- /* 540 */ 226, 232, 208, 232, 50, 51, 29, 52, 174, 175,
- /* 550 */ 188, 74, 75, 51, 103, 60, 222, 163, 209, 0,
- /* 560 */ 1, 2, 45, 152, 47, 71, 72, 73, 74, 75,
- /* 570 */ 76, 77, 78, 79, 80, 81, 82, 83, 101, 85,
- /* 580 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
- /* 590 */ 19, 140, 198, 152, 23, 152, 22, 98, 24, 152,
- /* 600 */ 152, 27, 152, 183, 152, 152, 111, 213, 214, 107,
- /* 610 */ 152, 164, 165, 152, 112, 174, 175, 174, 175, 181,
- /* 620 */ 182, 50, 51, 124, 174, 175, 174, 175, 190, 26,
- /* 630 */ 22, 23, 22, 23, 26, 166, 26, 168, 169, 16,
- /* 640 */ 16, 19, 71, 72, 73, 74, 75, 76, 77, 78,
- /* 650 */ 79, 80, 81, 82, 83, 152, 85, 86, 87, 88,
- /* 660 */ 89, 90, 91, 92, 93, 94, 95, 152, 220, 196,
- /* 670 */ 197, 97, 50, 51, 108, 109, 110, 152, 70, 221,
- /* 680 */ 70, 208, 7, 8, 9, 62, 62, 64, 64, 174,
- /* 690 */ 175, 146, 147, 71, 72, 73, 74, 75, 76, 77,
- /* 700 */ 78, 79, 80, 81, 82, 83, 152, 85, 86, 87,
- /* 710 */ 88, 89, 90, 91, 92, 93, 94, 95, 19, 152,
- /* 720 */ 195, 152, 31, 220, 152, 152, 35, 26, 174, 175,
- /* 730 */ 152, 163, 152, 130, 152, 115, 152, 117, 118, 152,
- /* 740 */ 49, 174, 175, 174, 175, 152, 174, 175, 26, 50,
- /* 750 */ 51, 152, 174, 175, 174, 175, 174, 175, 174, 175,
- /* 760 */ 138, 174, 175, 140, 22, 23, 198, 174, 175, 152,
- /* 770 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80,
- /* 780 */ 81, 82, 83, 152, 85, 86, 87, 88, 89, 90,
- /* 790 */ 91, 92, 93, 94, 95, 19, 152, 152, 152, 98,
- /* 800 */ 24, 152, 108, 109, 110, 174, 175, 152, 152, 152,
- /* 810 */ 152, 152, 70, 152, 213, 214, 152, 152, 174, 175,
- /* 820 */ 174, 175, 152, 174, 175, 124, 50, 51, 106, 174,
- /* 830 */ 175, 174, 175, 174, 175, 174, 175, 138, 174, 175,
- /* 840 */ 152, 22, 23, 22, 163, 189, 19, 71, 72, 73,
- /* 850 */ 74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
- /* 860 */ 152, 85, 86, 87, 88, 89, 90, 91, 92, 93,
- /* 870 */ 94, 95, 152, 152, 168, 169, 152, 50, 51, 198,
- /* 880 */ 197, 152, 174, 175, 152, 240, 152, 152, 152, 70,
- /* 890 */ 152, 208, 152, 152, 174, 175, 152, 19, 71, 72,
- /* 900 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82,
- /* 910 */ 83, 152, 85, 86, 87, 88, 89, 90, 91, 92,
- /* 920 */ 93, 94, 95, 152, 195, 247, 248, 152, 50, 51,
- /* 930 */ 195, 195, 152, 174, 175, 195, 195, 26, 152, 195,
- /* 940 */ 252, 220, 163, 122, 152, 174, 175, 163, 19, 71,
- /* 950 */ 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,
- /* 960 */ 82, 83, 152, 85, 86, 87, 88, 89, 90, 91,
- /* 970 */ 92, 93, 94, 95, 152, 195, 252, 198, 240, 50,
- /* 980 */ 51, 189, 198, 19, 174, 175, 19, 51, 23, 100,
- /* 990 */ 101, 26, 28, 163, 163, 28, 174, 175, 163, 19,
- /* 1000 */ 152, 72, 73, 74, 75, 76, 77, 78, 79, 80,
- /* 1010 */ 81, 82, 83, 152, 85, 86, 87, 88, 89, 90,
- /* 1020 */ 91, 92, 93, 94, 95, 152, 240, 152, 198, 198,
- /* 1030 */ 50, 51, 33, 198, 123, 174, 175, 116, 7, 8,
- /* 1040 */ 101, 42, 121, 107, 152, 152, 23, 174, 175, 26,
- /* 1050 */ 152, 112, 183, 73, 74, 75, 76, 77, 78, 79,
- /* 1060 */ 80, 81, 82, 83, 152, 85, 86, 87, 88, 89,
- /* 1070 */ 90, 91, 92, 93, 94, 95, 19, 20, 23, 22,
- /* 1080 */ 23, 26, 152, 152, 27, 28, 174, 175, 23, 19,
- /* 1090 */ 20, 26, 22, 132, 133, 38, 152, 27, 28, 152,
- /* 1100 */ 23, 215, 152, 26, 174, 175, 152, 27, 38, 152,
- /* 1110 */ 23, 152, 27, 26, 57, 152, 23, 163, 152, 26,
- /* 1120 */ 152, 174, 175, 66, 174, 175, 69, 57, 174, 175,
- /* 1130 */ 27, 174, 175, 174, 175, 152, 66, 174, 175, 69,
- /* 1140 */ 174, 175, 174, 175, 152, 23, 89, 90, 26, 91,
- /* 1150 */ 152, 236, 198, 96, 97, 98, 132, 133, 101, 89,
- /* 1160 */ 90, 152, 23, 209, 210, 26, 96, 97, 98, 152,
- /* 1170 */ 212, 101, 174, 175, 116, 19, 20, 97, 22, 121,
- /* 1180 */ 152, 193, 97, 27, 28, 152, 152, 152, 152, 132,
- /* 1190 */ 133, 134, 135, 136, 38, 23, 152, 152, 26, 152,
- /* 1200 */ 97, 152, 132, 133, 134, 135, 136, 235, 152, 212,
- /* 1210 */ 199, 150, 212, 57, 212, 200, 203, 216, 241, 216,
- /* 1220 */ 241, 203, 182, 19, 20, 69, 22, 186, 178, 177,
- /* 1230 */ 216, 27, 28, 229, 202, 39, 177, 177, 200, 155,
- /* 1240 */ 245, 122, 38, 41, 22, 89, 90, 91, 159, 159,
- /* 1250 */ 242, 159, 96, 97, 98, 71, 130, 101, 242, 191,
- /* 1260 */ 223, 57, 18, 194, 159, 203, 194, 194, 194, 18,
- /* 1270 */ 158, 223, 191, 69, 203, 159, 158, 19, 20, 191,
- /* 1280 */ 22, 203, 137, 46, 238, 27, 28, 159, 132, 133,
- /* 1290 */ 134, 135, 136, 89, 90, 159, 38, 22, 158, 179,
- /* 1300 */ 96, 97, 98, 237, 158, 101, 159, 159, 158, 179,
- /* 1310 */ 107, 176, 48, 176, 176, 57, 184, 106, 176, 125,
- /* 1320 */ 179, 178, 218, 107, 217, 176, 218, 69, 184, 176,
- /* 1330 */ 176, 217, 159, 218, 217, 159, 132, 133, 134, 135,
- /* 1340 */ 136, 218, 217, 137, 179, 95, 179, 89, 90, 228,
- /* 1350 */ 129, 126, 128, 127, 96, 97, 98, 206, 231, 101,
- /* 1360 */ 5, 25, 231, 205, 207, 10, 11, 12, 13, 14,
- /* 1370 */ 204, 203, 17, 26, 162, 161, 13, 6, 180, 180,
- /* 1380 */ 153, 153, 151, 151, 151, 151, 167, 32, 4, 34,
- /* 1390 */ 132, 133, 134, 135, 136, 3, 22, 142, 43, 68,
- /* 1400 */ 15, 23, 16, 251, 23, 120, 251, 248, 131, 111,
- /* 1410 */ 123, 56, 16, 20, 125, 1, 123, 131, 63, 79,
- /* 1420 */ 79, 66, 67, 111, 36, 28, 122, 1, 5, 22,
- /* 1430 */ 107, 140, 26, 54, 54, 44, 61, 107, 20, 24,
- /* 1440 */ 19, 112, 105, 53, 22, 40, 22, 22, 53, 30,
- /* 1450 */ 23, 22, 22, 53, 23, 23, 23, 22, 116, 23,
- /* 1460 */ 22, 122, 23, 26, 23, 22, 11, 124, 28, 114,
- /* 1470 */ 36, 26, 26, 23, 23, 23, 122, 23, 36, 26,
- /* 1480 */ 36, 22, 24, 23, 22, 1, 23, 26, 22, 24,
- /* 1490 */ 23, 22, 122, 23, 23, 22, 141, 23, 122, 122,
- /* 1500 */ 15,
+ /* 0 */ 144, 145, 146, 147, 172, 222, 223, 224, 222, 223,
+ /* 10 */ 224, 152, 180, 152, 148, 149, 152, 173, 176, 19,
+ /* 20 */ 154, 173, 156, 152, 163, 242, 152, 163, 176, 163,
+ /* 30 */ 26, 31, 173, 174, 173, 174, 173, 173, 174, 39,
+ /* 40 */ 1, 2, 152, 43, 44, 45, 46, 47, 48, 49,
+ /* 50 */ 50, 51, 52, 53, 54, 55, 56, 57, 197, 169,
+ /* 60 */ 170, 197, 188, 197, 222, 223, 224, 208, 209, 208,
+ /* 70 */ 209, 19, 208, 152, 222, 223, 224, 22, 26, 24,
+ /* 80 */ 46, 47, 48, 49, 84, 85, 86, 87, 88, 89,
+ /* 90 */ 90, 91, 92, 93, 94, 43, 44, 45, 46, 47,
+ /* 100 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+ /* 110 */ 106, 245, 157, 88, 89, 90, 91, 92, 93, 94,
+ /* 120 */ 68, 231, 251, 19, 84, 85, 86, 87, 88, 89,
+ /* 130 */ 90, 91, 92, 93, 94, 101, 84, 85, 86, 87,
+ /* 140 */ 88, 89, 90, 91, 92, 93, 94, 43, 44, 45,
+ /* 150 */ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55,
+ /* 160 */ 56, 57, 90, 91, 92, 93, 94, 82, 79, 99,
+ /* 170 */ 66, 200, 102, 103, 104, 19, 168, 169, 170, 152,
+ /* 180 */ 24, 210, 97, 113, 229, 59, 101, 232, 84, 85,
+ /* 190 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 43,
+ /* 200 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+ /* 210 */ 54, 55, 56, 57, 152, 188, 152, 132, 133, 134,
+ /* 220 */ 93, 94, 96, 97, 98, 99, 152, 19, 102, 103,
+ /* 230 */ 104, 23, 94, 72, 79, 173, 174, 173, 174, 113,
+ /* 240 */ 84, 85, 86, 87, 88, 89, 90, 91, 92, 93,
+ /* 250 */ 94, 43, 44, 45, 46, 47, 48, 49, 50, 51,
+ /* 260 */ 52, 53, 54, 55, 56, 57, 152, 171, 152, 108,
+ /* 270 */ 109, 110, 208, 209, 119, 120, 152, 180, 181, 19,
+ /* 280 */ 119, 120, 152, 23, 152, 152, 189, 173, 174, 173,
+ /* 290 */ 174, 59, 84, 85, 86, 87, 88, 89, 90, 91,
+ /* 300 */ 92, 93, 94, 43, 44, 45, 46, 47, 48, 49,
+ /* 310 */ 50, 51, 52, 53, 54, 55, 56, 57, 222, 223,
+ /* 320 */ 224, 186, 208, 209, 208, 209, 194, 194, 96, 97,
+ /* 330 */ 98, 19, 168, 169, 170, 23, 88, 89, 163, 59,
+ /* 340 */ 0, 1, 2, 219, 84, 85, 86, 87, 88, 89,
+ /* 350 */ 90, 91, 92, 93, 94, 43, 44, 45, 46, 47,
+ /* 360 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+ /* 370 */ 90, 152, 197, 195, 196, 243, 96, 97, 98, 196,
+ /* 380 */ 132, 11, 134, 19, 182, 207, 115, 23, 117, 118,
+ /* 390 */ 207, 163, 173, 174, 152, 220, 84, 85, 86, 87,
+ /* 400 */ 88, 89, 90, 91, 92, 93, 94, 43, 44, 45,
+ /* 410 */ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55,
+ /* 420 */ 56, 57, 152, 16, 152, 197, 171, 208, 22, 23,
+ /* 430 */ 22, 23, 26, 16, 26, 19, 7, 8, 9, 23,
+ /* 440 */ 212, 213, 152, 173, 174, 173, 174, 19, 84, 85,
+ /* 450 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 43,
+ /* 460 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+ /* 470 */ 54, 55, 56, 57, 46, 152, 109, 110, 208, 109,
+ /* 480 */ 110, 152, 75, 152, 77, 22, 23, 19, 233, 83,
+ /* 490 */ 152, 83, 75, 238, 77, 164, 173, 174, 226, 59,
+ /* 500 */ 84, 85, 86, 87, 88, 89, 90, 91, 92, 93,
+ /* 510 */ 94, 43, 44, 45, 46, 47, 48, 49, 50, 51,
+ /* 520 */ 52, 53, 54, 55, 56, 57, 108, 109, 110, 152,
+ /* 530 */ 152, 152, 22, 22, 23, 107, 96, 97, 98, 160,
+ /* 540 */ 112, 251, 19, 164, 22, 152, 83, 140, 219, 152,
+ /* 550 */ 173, 174, 84, 85, 86, 87, 88, 89, 90, 91,
+ /* 560 */ 92, 93, 94, 59, 124, 152, 43, 44, 45, 46,
+ /* 570 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56,
+ /* 580 */ 57, 59, 169, 170, 119, 120, 82, 108, 109, 110,
+ /* 590 */ 191, 192, 191, 192, 83, 248, 249, 19, 88, 89,
+ /* 600 */ 96, 97, 24, 152, 152, 101, 138, 84, 85, 86,
+ /* 610 */ 87, 88, 89, 90, 91, 92, 93, 94, 96, 97,
+ /* 620 */ 98, 43, 44, 45, 46, 47, 48, 49, 50, 51,
+ /* 630 */ 52, 53, 54, 55, 56, 57, 132, 133, 134, 152,
+ /* 640 */ 152, 46, 152, 26, 231, 194, 194, 146, 147, 19,
+ /* 650 */ 152, 116, 152, 72, 152, 152, 121, 152, 152, 152,
+ /* 660 */ 79, 138, 84, 85, 86, 87, 88, 89, 90, 91,
+ /* 670 */ 92, 93, 94, 43, 44, 45, 46, 47, 48, 49,
+ /* 680 */ 50, 51, 52, 53, 54, 55, 56, 57, 152, 108,
+ /* 690 */ 23, 152, 194, 26, 194, 152, 194, 194, 137, 152,
+ /* 700 */ 139, 19, 107, 166, 167, 218, 218, 29, 218, 173,
+ /* 710 */ 174, 33, 173, 174, 84, 85, 86, 87, 88, 89,
+ /* 720 */ 90, 91, 92, 93, 94, 43, 44, 45, 46, 47,
+ /* 730 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+ /* 740 */ 152, 194, 64, 171, 239, 239, 239, 130, 166, 167,
+ /* 750 */ 212, 213, 19, 23, 246, 247, 26, 59, 26, 152,
+ /* 760 */ 163, 218, 163, 163, 163, 98, 84, 85, 86, 87,
+ /* 770 */ 88, 89, 90, 91, 92, 93, 94, 44, 45, 46,
+ /* 780 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56,
+ /* 790 */ 57, 124, 26, 79, 197, 97, 197, 197, 197, 31,
+ /* 800 */ 152, 23, 19, 19, 26, 19, 218, 39, 23, 21,
+ /* 810 */ 238, 26, 163, 163, 100, 59, 163, 84, 85, 86,
+ /* 820 */ 87, 88, 89, 90, 91, 92, 93, 94, 45, 46,
+ /* 830 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56,
+ /* 840 */ 57, 19, 20, 152, 22, 23, 197, 197, 23, 19,
+ /* 850 */ 197, 26, 152, 97, 23, 123, 23, 26, 36, 26,
+ /* 860 */ 152, 152, 19, 20, 98, 22, 78, 84, 85, 86,
+ /* 870 */ 87, 88, 89, 90, 91, 92, 93, 94, 94, 36,
+ /* 880 */ 152, 59, 96, 99, 100, 101, 102, 103, 104, 105,
+ /* 890 */ 124, 103, 70, 100, 101, 23, 112, 12, 26, 12,
+ /* 900 */ 23, 79, 59, 26, 82, 101, 22, 7, 8, 152,
+ /* 910 */ 88, 89, 27, 70, 27, 152, 112, 95, 96, 97,
+ /* 920 */ 98, 152, 79, 101, 22, 82, 96, 42, 140, 42,
+ /* 930 */ 182, 88, 89, 19, 20, 132, 22, 134, 95, 96,
+ /* 940 */ 97, 98, 23, 59, 101, 26, 22, 62, 152, 62,
+ /* 950 */ 36, 22, 59, 24, 132, 133, 134, 135, 136, 72,
+ /* 960 */ 5, 59, 152, 22, 71, 10, 11, 12, 13, 14,
+ /* 970 */ 152, 152, 17, 59, 182, 132, 133, 134, 135, 136,
+ /* 980 */ 96, 97, 98, 59, 70, 30, 152, 32, 59, 96,
+ /* 990 */ 97, 98, 173, 174, 53, 40, 82, 152, 96, 97,
+ /* 1000 */ 98, 90, 88, 89, 90, 24, 187, 173, 174, 95,
+ /* 1010 */ 96, 97, 98, 152, 152, 101, 19, 20, 152, 22,
+ /* 1020 */ 96, 97, 98, 152, 69, 59, 97, 116, 59, 214,
+ /* 1030 */ 152, 76, 121, 36, 79, 80, 19, 20, 152, 22,
+ /* 1040 */ 59, 132, 59, 134, 173, 174, 132, 133, 134, 135,
+ /* 1050 */ 136, 173, 174, 36, 234, 152, 59, 152, 187, 173,
+ /* 1060 */ 174, 211, 96, 97, 98, 187, 97, 70, 23, 114,
+ /* 1070 */ 152, 26, 23, 187, 23, 26, 59, 26, 97, 82,
+ /* 1080 */ 97, 22, 164, 152, 152, 88, 89, 70, 192, 152,
+ /* 1090 */ 124, 152, 95, 96, 97, 98, 141, 152, 101, 82,
+ /* 1100 */ 152, 152, 184, 152, 186, 88, 89, 199, 54, 55,
+ /* 1110 */ 56, 57, 95, 96, 97, 98, 152, 152, 101, 152,
+ /* 1120 */ 152, 173, 174, 235, 54, 55, 56, 57, 58, 132,
+ /* 1130 */ 133, 134, 135, 136, 211, 150, 59, 211, 84, 85,
+ /* 1140 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 132,
+ /* 1150 */ 133, 134, 135, 136, 84, 85, 86, 87, 88, 89,
+ /* 1160 */ 90, 91, 92, 93, 94, 88, 89, 195, 196, 35,
+ /* 1170 */ 211, 211, 152, 96, 97, 98, 152, 100, 198, 207,
+ /* 1180 */ 171, 122, 240, 152, 107, 215, 109, 240, 202, 215,
+ /* 1190 */ 202, 152, 220, 173, 174, 177, 185, 173, 174, 65,
+ /* 1200 */ 152, 176, 152, 181, 173, 174, 215, 73, 176, 132,
+ /* 1210 */ 228, 134, 173, 174, 176, 152, 201, 152, 199, 155,
+ /* 1220 */ 152, 173, 174, 173, 174, 60, 152, 122, 244, 38,
+ /* 1230 */ 159, 159, 152, 241, 241, 152, 173, 174, 173, 174,
+ /* 1240 */ 152, 173, 174, 152, 159, 111, 152, 173, 174, 152,
+ /* 1250 */ 22, 152, 43, 173, 174, 152, 173, 174, 152, 190,
+ /* 1260 */ 130, 173, 174, 152, 173, 174, 152, 173, 174, 202,
+ /* 1270 */ 173, 174, 173, 174, 152, 18, 173, 174, 152, 173,
+ /* 1280 */ 174, 152, 221, 152, 173, 174, 193, 173, 174, 152,
+ /* 1290 */ 158, 152, 159, 152, 22, 173, 174, 152, 18, 173,
+ /* 1300 */ 174, 152, 173, 174, 173, 174, 152, 221, 152, 193,
+ /* 1310 */ 173, 174, 173, 174, 173, 174, 152, 193, 173, 174,
+ /* 1320 */ 152, 193, 173, 174, 158, 152, 190, 173, 174, 173,
+ /* 1330 */ 174, 59, 152, 190, 159, 137, 152, 173, 174, 152,
+ /* 1340 */ 202, 173, 174, 61, 152, 237, 173, 174, 202, 236,
+ /* 1350 */ 22, 107, 159, 173, 174, 159, 178, 173, 174, 158,
+ /* 1360 */ 173, 174, 159, 158, 158, 173, 174, 159, 178, 97,
+ /* 1370 */ 175, 63, 175, 106, 175, 125, 217, 183, 178, 175,
+ /* 1380 */ 107, 159, 22, 216, 177, 175, 217, 175, 175, 217,
+ /* 1390 */ 216, 159, 216, 216, 183, 225, 217, 137, 227, 178,
+ /* 1400 */ 94, 178, 126, 129, 25, 128, 127, 162, 206, 26,
+ /* 1410 */ 161, 230, 230, 13, 153, 153, 6, 151, 203, 205,
+ /* 1420 */ 204, 202, 151, 165, 171, 171, 151, 171, 165, 165,
+ /* 1430 */ 171, 179, 4, 250, 179, 250, 247, 3, 22, 171,
+ /* 1440 */ 171, 171, 142, 81, 15, 23, 16, 23, 131, 171,
+ /* 1450 */ 120, 111, 123, 20, 16, 1, 125, 123, 131, 53,
+ /* 1460 */ 53, 53, 53, 111, 96, 34, 122, 1, 5, 22,
+ /* 1470 */ 107, 67, 140, 74, 26, 24, 41, 107, 67, 20,
+ /* 1480 */ 19, 112, 105, 66, 22, 66, 22, 22, 28, 66,
+ /* 1490 */ 23, 22, 22, 37, 23, 23, 23, 116, 22, 22,
+ /* 1500 */ 26, 23, 122, 23, 23, 26, 22, 11, 96, 34,
+ /* 1510 */ 124, 26, 26, 23, 23, 23, 34, 34, 23, 26,
+ /* 1520 */ 23, 22, 24, 23, 22, 122, 23, 26, 22, 24,
+ /* 1530 */ 23, 22, 15, 23, 23, 22, 122, 122, 23, 1,
+ /* 1540 */ 122, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1550 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1560 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1570 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1580 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1590 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1600 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1610 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1620 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1630 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1640 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1650 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1660 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1670 */ 252, 252, 252, 252, 252, 252, 252, 252, 252, 252,
+ /* 1680 */ 252, 252, 252, 252,
};
-#define YY_SHIFT_USE_DFLT (-72)
-#define YY_SHIFT_COUNT (435)
-#define YY_SHIFT_MIN (-71)
-#define YY_SHIFT_MAX (1485)
-static const short yy_shift_ofst[] = {
- /* 0 */ 5, 1057, 1355, 1070, 1204, 1204, 1204, 90, 60, -19,
- /* 10 */ 58, 58, 186, 1204, 1204, 1204, 1204, 1204, 1204, 1204,
- /* 20 */ 67, 67, 182, 336, 65, 250, 135, 263, 340, 417,
- /* 30 */ 494, 571, 622, 699, 776, 827, 827, 827, 827, 827,
- /* 40 */ 827, 827, 827, 827, 827, 827, 827, 827, 827, 827,
- /* 50 */ 878, 827, 929, 980, 980, 1156, 1204, 1204, 1204, 1204,
- /* 60 */ 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204,
- /* 70 */ 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204,
- /* 80 */ 1204, 1204, 1204, 1204, 1258, 1204, 1204, 1204, 1204, 1204,
- /* 90 */ 1204, 1204, 1204, 1204, 1204, 1204, 1204, 1204, -71, -47,
- /* 100 */ -47, -47, -47, -47, -6, 88, -66, 65, 65, 451,
- /* 110 */ 502, 112, 112, 33, 127, 278, -30, -72, -72, -72,
- /* 120 */ 11, 412, 412, 268, 608, 610, 65, 65, 65, 65,
- /* 130 */ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
- /* 140 */ 65, 65, 65, 65, 65, 559, 138, 278, 127, 24,
- /* 150 */ 24, 24, 24, 24, 24, -72, -72, -72, 228, 341,
- /* 160 */ 341, 207, 276, 300, 352, 354, 350, 65, 65, 65,
- /* 170 */ 65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
- /* 180 */ 65, 65, 65, 65, 495, 495, 495, 65, 65, 499,
- /* 190 */ 65, 65, 65, 574, 65, 65, 517, 65, 65, 65,
- /* 200 */ 65, 65, 65, 65, 65, 65, 65, 566, 691, 288,
- /* 210 */ 288, 288, 701, 620, 1058, 675, 603, 964, 964, 967,
- /* 220 */ 603, 967, 722, 965, 936, 999, 964, 264, 999, 999,
- /* 230 */ 911, 921, 434, 1196, 1119, 1119, 1202, 1202, 1119, 1222,
- /* 240 */ 1184, 1126, 1244, 1244, 1244, 1244, 1119, 1251, 1126, 1222,
- /* 250 */ 1184, 1184, 1126, 1119, 1251, 1145, 1237, 1119, 1119, 1251,
- /* 260 */ 1275, 1119, 1251, 1119, 1251, 1275, 1203, 1203, 1203, 1264,
- /* 270 */ 1275, 1203, 1211, 1203, 1264, 1203, 1203, 1194, 1216, 1194,
- /* 280 */ 1216, 1194, 1216, 1194, 1216, 1119, 1119, 1206, 1275, 1250,
- /* 290 */ 1250, 1275, 1221, 1225, 1224, 1226, 1126, 1336, 1347, 1363,
- /* 300 */ 1363, 1371, 1371, 1371, 1371, -72, -72, -72, -72, -72,
- /* 310 */ -72, 477, 623, 742, 819, 624, 694, 74, 1023, 221,
- /* 320 */ 1055, 1065, 1077, 1087, 1080, 889, 1031, 939, 1093, 1122,
- /* 330 */ 1085, 1139, 961, 1024, 1172, 1103, 821, 1384, 1392, 1374,
- /* 340 */ 1255, 1385, 1331, 1386, 1378, 1381, 1285, 1277, 1298, 1287,
- /* 350 */ 1393, 1289, 1396, 1414, 1293, 1286, 1340, 1341, 1312, 1397,
- /* 360 */ 1388, 1304, 1426, 1423, 1407, 1323, 1291, 1379, 1406, 1380,
- /* 370 */ 1375, 1391, 1330, 1415, 1418, 1421, 1329, 1337, 1422, 1390,
- /* 380 */ 1424, 1425, 1427, 1429, 1395, 1419, 1430, 1400, 1405, 1431,
- /* 390 */ 1432, 1433, 1342, 1435, 1436, 1438, 1437, 1339, 1439, 1441,
- /* 400 */ 1440, 1434, 1443, 1343, 1445, 1442, 1446, 1444, 1445, 1450,
- /* 410 */ 1451, 1452, 1453, 1454, 1459, 1455, 1460, 1462, 1458, 1461,
- /* 420 */ 1463, 1466, 1465, 1461, 1467, 1469, 1470, 1471, 1473, 1354,
- /* 430 */ 1370, 1376, 1377, 1474, 1485, 1484,
+#define YY_SHIFT_COUNT (465)
+#define YY_SHIFT_MIN (0)
+#define YY_SHIFT_MAX (1538)
+static const unsigned short int yy_shift_ofst[] = {
+ /* 0 */ 39, 822, 955, 843, 997, 997, 997, 997, 0, 0,
+ /* 10 */ 104, 630, 997, 997, 997, 997, 997, 997, 997, 1077,
+ /* 20 */ 1077, 126, 161, 155, 52, 156, 208, 260, 312, 364,
+ /* 30 */ 416, 468, 523, 578, 630, 630, 630, 630, 630, 630,
+ /* 40 */ 630, 630, 630, 630, 630, 630, 630, 630, 630, 630,
+ /* 50 */ 630, 682, 630, 733, 783, 783, 914, 997, 997, 997,
+ /* 60 */ 997, 997, 997, 997, 997, 997, 997, 997, 997, 997,
+ /* 70 */ 997, 997, 997, 997, 997, 997, 997, 997, 997, 997,
+ /* 80 */ 997, 997, 997, 997, 997, 997, 997, 997, 1017, 997,
+ /* 90 */ 997, 997, 997, 997, 997, 997, 997, 997, 997, 997,
+ /* 100 */ 997, 997, 1070, 1054, 1054, 1054, 1054, 1054, 40, 25,
+ /* 110 */ 72, 232, 788, 428, 248, 248, 232, 581, 367, 127,
+ /* 120 */ 465, 138, 1541, 1541, 1541, 784, 784, 784, 522, 522,
+ /* 130 */ 887, 887, 893, 406, 408, 232, 232, 232, 232, 232,
+ /* 140 */ 232, 232, 232, 232, 232, 232, 232, 232, 232, 232,
+ /* 150 */ 232, 232, 232, 232, 232, 370, 340, 714, 698, 698,
+ /* 160 */ 465, 89, 89, 89, 89, 89, 89, 1541, 1541, 1541,
+ /* 170 */ 504, 85, 85, 884, 70, 280, 902, 440, 966, 924,
+ /* 180 */ 232, 232, 232, 232, 232, 232, 232, 232, 232, 232,
+ /* 190 */ 232, 232, 232, 232, 232, 232, 1134, 1134, 1134, 232,
+ /* 200 */ 232, 667, 232, 232, 232, 929, 232, 232, 885, 232,
+ /* 210 */ 232, 232, 232, 232, 232, 232, 232, 232, 232, 418,
+ /* 220 */ 678, 981, 981, 981, 981, 766, 271, 911, 510, 429,
+ /* 230 */ 617, 786, 786, 830, 617, 830, 4, 730, 595, 768,
+ /* 240 */ 786, 561, 768, 768, 732, 535, 55, 1165, 1105, 1105,
+ /* 250 */ 1191, 1191, 1105, 1228, 1209, 1130, 1257, 1257, 1257, 1257,
+ /* 260 */ 1105, 1280, 1130, 1228, 1209, 1209, 1130, 1105, 1280, 1198,
+ /* 270 */ 1282, 1105, 1105, 1280, 1328, 1105, 1280, 1105, 1280, 1328,
+ /* 280 */ 1244, 1244, 1244, 1308, 1328, 1244, 1267, 1244, 1308, 1244,
+ /* 290 */ 1244, 1250, 1273, 1250, 1273, 1250, 1273, 1250, 1273, 1105,
+ /* 300 */ 1360, 1105, 1260, 1328, 1306, 1306, 1328, 1274, 1276, 1277,
+ /* 310 */ 1279, 1130, 1379, 1383, 1400, 1400, 1410, 1410, 1410, 1541,
+ /* 320 */ 1541, 1541, 1541, 1541, 1541, 1541, 1541, 1541, 1541, 1541,
+ /* 330 */ 1541, 1541, 1541, 1541, 1541, 34, 407, 463, 511, 417,
+ /* 340 */ 479, 1272, 778, 941, 785, 825, 831, 833, 872, 877,
+ /* 350 */ 756, 793, 900, 804, 919, 1045, 969, 1049, 803, 909,
+ /* 360 */ 1051, 983, 1059, 1428, 1434, 1416, 1300, 1429, 1362, 1430,
+ /* 370 */ 1422, 1424, 1330, 1317, 1340, 1329, 1433, 1331, 1438, 1454,
+ /* 380 */ 1334, 1327, 1406, 1407, 1408, 1409, 1352, 1368, 1431, 1344,
+ /* 390 */ 1466, 1463, 1447, 1363, 1332, 1404, 1448, 1411, 1399, 1435,
+ /* 400 */ 1370, 1451, 1459, 1461, 1369, 1377, 1462, 1417, 1464, 1465,
+ /* 410 */ 1467, 1469, 1419, 1460, 1470, 1423, 1456, 1471, 1472, 1473,
+ /* 420 */ 1474, 1381, 1476, 1478, 1477, 1479, 1380, 1480, 1481, 1412,
+ /* 430 */ 1475, 1484, 1386, 1485, 1482, 1486, 1483, 1490, 1485, 1491,
+ /* 440 */ 1492, 1495, 1493, 1497, 1499, 1496, 1500, 1502, 1498, 1501,
+ /* 450 */ 1503, 1506, 1505, 1501, 1507, 1509, 1510, 1511, 1513, 1403,
+ /* 460 */ 1414, 1415, 1418, 1515, 1517, 1538,
};
-#define YY_REDUCE_USE_DFLT (-176)
-#define YY_REDUCE_COUNT (310)
-#define YY_REDUCE_MIN (-175)
-#define YY_REDUCE_MAX (1234)
+#define YY_REDUCE_COUNT (334)
+#define YY_REDUCE_MIN (-217)
+#define YY_REDUCE_MAX (1278)
static const short yy_reduce_ofst[] = {
- /* 0 */ -143, 954, 86, 21, -50, 23, 79, 134, 170, -175,
- /* 10 */ 229, 260, -121, 212, 219, 291, -54, 349, 362, 156,
- /* 20 */ 309, 311, 334, 85, 224, 394, 314, 314, 314, 314,
- /* 30 */ 314, 314, 314, 314, 314, 314, 314, 314, 314, 314,
- /* 40 */ 314, 314, 314, 314, 314, 314, 314, 314, 314, 314,
- /* 50 */ 314, 314, 314, 314, 314, 374, 441, 443, 450, 452,
- /* 60 */ 515, 554, 567, 569, 572, 578, 580, 582, 584, 587,
- /* 70 */ 593, 631, 644, 646, 649, 655, 657, 659, 661, 664,
- /* 80 */ 708, 720, 759, 771, 810, 822, 861, 873, 912, 930,
- /* 90 */ 947, 950, 957, 959, 963, 966, 968, 998, 314, 314,
- /* 100 */ 314, 314, 314, 314, 314, 314, 314, 447, -53, 166,
- /* 110 */ 438, 348, 363, 314, 473, 469, 314, 314, 314, 314,
- /* 120 */ -15, 59, 101, 688, 220, 220, 525, 256, 729, 735,
- /* 130 */ 736, 740, 741, 744, 645, 448, 738, 458, 786, 503,
- /* 140 */ 780, 656, 721, 724, 792, 545, 568, 706, 683, 681,
- /* 150 */ 779, 784, 830, 831, 835, 678, 601, -104, -2, 96,
- /* 160 */ 111, 218, 287, 308, 310, 312, 335, 411, 453, 461,
- /* 170 */ 573, 599, 617, 658, 665, 670, 732, 734, 775, 848,
- /* 180 */ 875, 892, 893, 898, 332, 420, 869, 931, 944, 886,
- /* 190 */ 983, 992, 1009, 958, 1017, 1028, 988, 1033, 1034, 1035,
- /* 200 */ 287, 1036, 1044, 1045, 1047, 1049, 1056, 915, 972, 997,
- /* 210 */ 1000, 1002, 886, 1011, 1015, 1061, 1013, 1001, 1003, 977,
- /* 220 */ 1018, 979, 1050, 1041, 1040, 1052, 1014, 1004, 1059, 1060,
- /* 230 */ 1032, 1038, 1084, 995, 1089, 1090, 1008, 1016, 1092, 1037,
- /* 240 */ 1068, 1062, 1069, 1072, 1073, 1074, 1105, 1112, 1071, 1048,
- /* 250 */ 1081, 1088, 1078, 1116, 1118, 1046, 1066, 1128, 1136, 1140,
- /* 260 */ 1120, 1147, 1146, 1148, 1150, 1130, 1135, 1137, 1138, 1132,
- /* 270 */ 1141, 1142, 1143, 1149, 1144, 1153, 1154, 1104, 1107, 1108,
- /* 280 */ 1114, 1115, 1117, 1123, 1125, 1173, 1176, 1121, 1165, 1127,
- /* 290 */ 1131, 1167, 1157, 1151, 1158, 1166, 1168, 1212, 1214, 1227,
- /* 300 */ 1228, 1231, 1232, 1233, 1234, 1152, 1155, 1159, 1198, 1199,
- /* 310 */ 1219,
+ /* 0 */ -144, -139, -134, -136, -141, 64, 114, 116, -158, -148,
+ /* 10 */ -217, 96, 819, 871, 878, 219, 270, 886, 272, -110,
+ /* 20 */ 413, 918, 972, 228, -214, -214, -214, -214, -214, -214,
+ /* 30 */ -214, -214, -214, -214, -214, -214, -214, -214, -214, -214,
+ /* 40 */ -214, -214, -214, -214, -214, -214, -214, -214, -214, -214,
+ /* 50 */ -214, -214, -214, -214, -214, -214, 62, 323, 377, 536,
+ /* 60 */ 539, 834, 948, 1020, 1024, 1031, 1039, 1048, 1050, 1063,
+ /* 70 */ 1065, 1068, 1074, 1080, 1083, 1088, 1091, 1094, 1097, 1099,
+ /* 80 */ 1103, 1106, 1111, 1114, 1122, 1126, 1129, 1131, 1137, 1139,
+ /* 90 */ 1141, 1145, 1149, 1154, 1156, 1164, 1168, 1173, 1180, 1184,
+ /* 100 */ 1187, 1192, -214, -214, -214, -214, -214, -214, -214, -214,
+ /* 110 */ -214, 132, -45, 97, 8, 164, 379, 175, 255, -214,
+ /* 120 */ 178, -214, -214, -214, -214, -168, -168, -168, 124, 329,
+ /* 130 */ 399, 401, -129, 347, 347, 331, 133, 451, 452, 498,
+ /* 140 */ 500, 502, 503, 505, 487, 506, 488, 490, 507, 543,
+ /* 150 */ 547, -126, 588, 290, 27, 572, 501, 597, 537, 582,
+ /* 160 */ 183, 599, 600, 601, 649, 650, 653, 508, 538, -29,
+ /* 170 */ -156, -152, -137, -79, 135, 74, 130, 242, 338, 378,
+ /* 180 */ 393, 397, 607, 648, 691, 700, 708, 709, 728, 757,
+ /* 190 */ 763, 769, 796, 810, 818, 845, 202, 748, 792, 861,
+ /* 200 */ 862, 815, 866, 903, 905, 850, 931, 932, 896, 937,
+ /* 210 */ 939, 945, 74, 949, 951, 964, 965, 967, 968, 888,
+ /* 220 */ 820, 923, 926, 959, 960, 815, 980, 908, 1009, 985,
+ /* 230 */ 986, 970, 974, 942, 988, 947, 1018, 1011, 1022, 1025,
+ /* 240 */ 991, 982, 1032, 1038, 1015, 1019, 1064, 984, 1071, 1072,
+ /* 250 */ 992, 993, 1085, 1061, 1069, 1067, 1093, 1116, 1124, 1128,
+ /* 260 */ 1133, 1132, 1138, 1086, 1136, 1143, 1146, 1175, 1166, 1108,
+ /* 270 */ 1113, 1193, 1196, 1201, 1178, 1203, 1205, 1208, 1206, 1190,
+ /* 280 */ 1195, 1197, 1199, 1194, 1200, 1204, 1207, 1210, 1211, 1212,
+ /* 290 */ 1213, 1159, 1167, 1169, 1174, 1172, 1176, 1179, 1177, 1222,
+ /* 300 */ 1170, 1232, 1171, 1221, 1181, 1182, 1223, 1202, 1214, 1216,
+ /* 310 */ 1215, 1219, 1245, 1249, 1261, 1262, 1266, 1271, 1275, 1183,
+ /* 320 */ 1185, 1189, 1258, 1253, 1254, 1256, 1259, 1263, 1252, 1255,
+ /* 330 */ 1268, 1269, 1270, 1278, 1264,
};
static const YYACTIONTYPE yy_default[] = {
- /* 0 */ 982, 1300, 1300, 1300, 1214, 1214, 1214, 1305, 1300, 1109,
- /* 10 */ 1138, 1138, 1274, 1305, 1305, 1305, 1305, 1305, 1305, 1212,
- /* 20 */ 1305, 1305, 1305, 1300, 1305, 1113, 1144, 1305, 1305, 1305,
- /* 30 */ 1305, 1305, 1305, 1305, 1305, 1273, 1275, 1152, 1151, 1254,
- /* 40 */ 1125, 1149, 1142, 1146, 1215, 1208, 1209, 1207, 1211, 1216,
- /* 50 */ 1305, 1145, 1177, 1192, 1176, 1305, 1305, 1305, 1305, 1305,
- /* 60 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 70 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 80 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 90 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1186, 1191,
- /* 100 */ 1198, 1190, 1187, 1179, 1178, 1180, 1181, 1305, 1305, 1008,
- /* 110 */ 1074, 1305, 1305, 1182, 1305, 1020, 1183, 1195, 1194, 1193,
- /* 120 */ 1015, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 130 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 140 */ 1305, 1305, 1305, 1305, 1305, 982, 1300, 1305, 1305, 1300,
- /* 150 */ 1300, 1300, 1300, 1300, 1300, 1292, 1113, 1103, 1305, 1305,
- /* 160 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1280, 1278,
- /* 170 */ 1305, 1227, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 180 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 190 */ 1305, 1305, 1305, 1109, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 200 */ 1305, 1305, 1305, 1305, 1305, 1305, 988, 1305, 1247, 1109,
- /* 210 */ 1109, 1109, 1111, 1089, 1101, 990, 1148, 1127, 1127, 1259,
- /* 220 */ 1148, 1259, 1045, 1068, 1042, 1138, 1127, 1210, 1138, 1138,
- /* 230 */ 1110, 1101, 1305, 1285, 1118, 1118, 1277, 1277, 1118, 1157,
- /* 240 */ 1078, 1148, 1085, 1085, 1085, 1085, 1118, 1005, 1148, 1157,
- /* 250 */ 1078, 1078, 1148, 1118, 1005, 1253, 1251, 1118, 1118, 1005,
- /* 260 */ 1220, 1118, 1005, 1118, 1005, 1220, 1076, 1076, 1076, 1060,
- /* 270 */ 1220, 1076, 1045, 1076, 1060, 1076, 1076, 1131, 1126, 1131,
- /* 280 */ 1126, 1131, 1126, 1131, 1126, 1118, 1118, 1305, 1220, 1224,
- /* 290 */ 1224, 1220, 1143, 1132, 1141, 1139, 1148, 1011, 1063, 998,
- /* 300 */ 998, 987, 987, 987, 987, 1297, 1297, 1292, 1047, 1047,
- /* 310 */ 1030, 1305, 1305, 1305, 1305, 1305, 1305, 1022, 1305, 1229,
- /* 320 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 330 */ 1305, 1305, 1305, 1305, 1305, 1305, 1164, 1305, 983, 1287,
- /* 340 */ 1305, 1305, 1284, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 350 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 360 */ 1305, 1257, 1305, 1305, 1305, 1305, 1305, 1305, 1250, 1249,
- /* 370 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 380 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305,
- /* 390 */ 1305, 1305, 1092, 1305, 1305, 1305, 1096, 1305, 1305, 1305,
- /* 400 */ 1305, 1305, 1305, 1305, 1140, 1305, 1133, 1305, 1213, 1305,
- /* 410 */ 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1305, 1302,
- /* 420 */ 1305, 1305, 1305, 1301, 1305, 1305, 1305, 1305, 1305, 1166,
- /* 430 */ 1305, 1165, 1169, 1305, 996, 1305,
+ /* 0 */ 1286, 1276, 1276, 1276, 1209, 1209, 1209, 1209, 1133, 1133,
+ /* 10 */ 1260, 1036, 1005, 1005, 1005, 1005, 1005, 1005, 1208, 1005,
+ /* 20 */ 1005, 1005, 1005, 1108, 1139, 1005, 1005, 1005, 1005, 1210,
+ /* 30 */ 1211, 1005, 1005, 1005, 1259, 1261, 1149, 1148, 1147, 1146,
+ /* 40 */ 1242, 1120, 1144, 1137, 1141, 1210, 1204, 1205, 1203, 1207,
+ /* 50 */ 1211, 1005, 1140, 1174, 1188, 1173, 1005, 1005, 1005, 1005,
+ /* 60 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 70 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 80 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 90 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 100 */ 1005, 1005, 1182, 1187, 1194, 1186, 1183, 1176, 1175, 1177,
+ /* 110 */ 1178, 1005, 1026, 1075, 1005, 1005, 1005, 1276, 1036, 1179,
+ /* 120 */ 1005, 1180, 1191, 1190, 1189, 1267, 1294, 1293, 1005, 1005,
+ /* 130 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 140 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 150 */ 1005, 1005, 1005, 1005, 1005, 1036, 1286, 1276, 1032, 1032,
+ /* 160 */ 1005, 1276, 1276, 1276, 1276, 1276, 1276, 1272, 1108, 1099,
+ /* 170 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 180 */ 1005, 1264, 1262, 1005, 1224, 1005, 1005, 1005, 1005, 1005,
+ /* 190 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 200 */ 1005, 1005, 1005, 1005, 1005, 1104, 1005, 1005, 1005, 1005,
+ /* 210 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1288, 1005,
+ /* 220 */ 1237, 1104, 1104, 1104, 1104, 1106, 1088, 1098, 1036, 1012,
+ /* 230 */ 1143, 1122, 1122, 1327, 1143, 1327, 1050, 1308, 1047, 1133,
+ /* 240 */ 1122, 1206, 1133, 1133, 1105, 1098, 1005, 1330, 1113, 1113,
+ /* 250 */ 1329, 1329, 1113, 1154, 1078, 1143, 1084, 1084, 1084, 1084,
+ /* 260 */ 1113, 1023, 1143, 1154, 1078, 1078, 1143, 1113, 1023, 1241,
+ /* 270 */ 1324, 1113, 1113, 1023, 1217, 1113, 1023, 1113, 1023, 1217,
+ /* 280 */ 1076, 1076, 1076, 1065, 1217, 1076, 1050, 1076, 1065, 1076,
+ /* 290 */ 1076, 1126, 1121, 1126, 1121, 1126, 1121, 1126, 1121, 1113,
+ /* 300 */ 1212, 1113, 1005, 1217, 1221, 1221, 1217, 1138, 1127, 1136,
+ /* 310 */ 1134, 1143, 1029, 1068, 1291, 1291, 1287, 1287, 1287, 1335,
+ /* 320 */ 1335, 1272, 1303, 1036, 1036, 1036, 1036, 1303, 1052, 1052,
+ /* 330 */ 1036, 1036, 1036, 1036, 1303, 1005, 1005, 1005, 1005, 1005,
+ /* 340 */ 1005, 1298, 1005, 1226, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 350 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 360 */ 1005, 1005, 1159, 1005, 1008, 1269, 1005, 1005, 1268, 1005,
+ /* 370 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 380 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1326,
+ /* 390 */ 1005, 1005, 1005, 1005, 1005, 1005, 1240, 1239, 1005, 1005,
+ /* 400 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 410 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005,
+ /* 420 */ 1005, 1090, 1005, 1005, 1005, 1312, 1005, 1005, 1005, 1005,
+ /* 430 */ 1005, 1005, 1005, 1135, 1005, 1128, 1005, 1005, 1317, 1005,
+ /* 440 */ 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1278,
+ /* 450 */ 1005, 1005, 1005, 1277, 1005, 1005, 1005, 1005, 1005, 1161,
+ /* 460 */ 1005, 1160, 1164, 1005, 1017, 1005,
};
+/********** End of lemon-generated parsing tables *****************************/
-/* The next table maps tokens into fallback tokens. If a construct
-** like the following:
+/* The next table maps tokens (terminal symbols) into fallback tokens.
+** If a construct like the following:
**
** %fallback ID X Y Z.
**
** and Z. Whenever one of the tokens X, Y, or Z is input to the parser
** but it does not parse, the type of the token is changed to ID and
** the parse is retried before an error is thrown.
+**
+** This feature can be used, for example, to cause some keywords in a language
+** to revert to identifiers if they keyword does not apply in the context where
+** it appears.
*/
#ifdef YYFALLBACK
static const YYCODETYPE yyFallback[] = {
0, /* $ => nothing */
0, /* SEMI => nothing */
- 27, /* EXPLAIN => ID */
- 27, /* QUERY => ID */
- 27, /* PLAN => ID */
- 27, /* BEGIN => ID */
+ 59, /* EXPLAIN => ID */
+ 59, /* QUERY => ID */
+ 59, /* PLAN => ID */
+ 59, /* BEGIN => ID */
0, /* TRANSACTION => nothing */
- 27, /* DEFERRED => ID */
- 27, /* IMMEDIATE => ID */
- 27, /* EXCLUSIVE => ID */
+ 59, /* DEFERRED => ID */
+ 59, /* IMMEDIATE => ID */
+ 59, /* EXCLUSIVE => ID */
0, /* COMMIT => nothing */
- 27, /* END => ID */
- 27, /* ROLLBACK => ID */
- 27, /* SAVEPOINT => ID */
- 27, /* RELEASE => ID */
+ 59, /* END => ID */
+ 59, /* ROLLBACK => ID */
+ 59, /* SAVEPOINT => ID */
+ 59, /* RELEASE => ID */
0, /* TO => nothing */
0, /* TABLE => nothing */
0, /* CREATE => nothing */
- 27, /* IF => ID */
+ 59, /* IF => ID */
0, /* NOT => nothing */
0, /* EXISTS => nothing */
- 27, /* TEMP => ID */
+ 59, /* TEMP => ID */
0, /* LP => nothing */
0, /* RP => nothing */
0, /* AS => nothing */
- 27, /* WITHOUT => ID */
+ 59, /* WITHOUT => ID */
0, /* COMMA => nothing */
+ 59, /* ABORT => ID */
+ 59, /* ACTION => ID */
+ 59, /* AFTER => ID */
+ 59, /* ANALYZE => ID */
+ 59, /* ASC => ID */
+ 59, /* ATTACH => ID */
+ 59, /* BEFORE => ID */
+ 59, /* BY => ID */
+ 59, /* CASCADE => ID */
+ 59, /* CAST => ID */
+ 59, /* CONFLICT => ID */
+ 59, /* DATABASE => ID */
+ 59, /* DESC => ID */
+ 59, /* DETACH => ID */
+ 59, /* EACH => ID */
+ 59, /* FAIL => ID */
+ 0, /* OR => nothing */
+ 0, /* AND => nothing */
+ 0, /* IS => nothing */
+ 59, /* MATCH => ID */
+ 59, /* LIKE_KW => ID */
+ 0, /* BETWEEN => nothing */
+ 0, /* IN => nothing */
+ 0, /* ISNULL => nothing */
+ 0, /* NOTNULL => nothing */
+ 0, /* NE => nothing */
+ 0, /* EQ => nothing */
+ 0, /* GT => nothing */
+ 0, /* LE => nothing */
+ 0, /* LT => nothing */
+ 0, /* GE => nothing */
+ 0, /* ESCAPE => nothing */
0, /* ID => nothing */
- 0, /* INDEXED => nothing */
- 27, /* ABORT => ID */
- 27, /* ACTION => ID */
- 27, /* AFTER => ID */
- 27, /* ANALYZE => ID */
- 27, /* ASC => ID */
- 27, /* ATTACH => ID */
- 27, /* BEFORE => ID */
- 27, /* BY => ID */
- 27, /* CASCADE => ID */
- 27, /* CAST => ID */
- 27, /* COLUMNKW => ID */
- 27, /* CONFLICT => ID */
- 27, /* DATABASE => ID */
- 27, /* DESC => ID */
- 27, /* DETACH => ID */
- 27, /* EACH => ID */
- 27, /* FAIL => ID */
- 27, /* FOR => ID */
- 27, /* IGNORE => ID */
- 27, /* INITIALLY => ID */
- 27, /* INSTEAD => ID */
- 27, /* LIKE_KW => ID */
- 27, /* MATCH => ID */
- 27, /* NO => ID */
- 27, /* KEY => ID */
- 27, /* OF => ID */
- 27, /* OFFSET => ID */
- 27, /* PRAGMA => ID */
- 27, /* RAISE => ID */
- 27, /* RECURSIVE => ID */
- 27, /* REPLACE => ID */
- 27, /* RESTRICT => ID */
- 27, /* ROW => ID */
- 27, /* TRIGGER => ID */
- 27, /* VACUUM => ID */
- 27, /* VIEW => ID */
- 27, /* VIRTUAL => ID */
- 27, /* WITH => ID */
- 27, /* REINDEX => ID */
- 27, /* RENAME => ID */
- 27, /* CTIME_KW => ID */
+ 59, /* COLUMNKW => ID */
+ 59, /* FOR => ID */
+ 59, /* IGNORE => ID */
+ 59, /* INITIALLY => ID */
+ 59, /* INSTEAD => ID */
+ 59, /* NO => ID */
+ 59, /* KEY => ID */
+ 59, /* OF => ID */
+ 59, /* OFFSET => ID */
+ 59, /* PRAGMA => ID */
+ 59, /* RAISE => ID */
+ 59, /* RECURSIVE => ID */
+ 59, /* REPLACE => ID */
+ 59, /* RESTRICT => ID */
+ 59, /* ROW => ID */
+ 59, /* TRIGGER => ID */
+ 59, /* VACUUM => ID */
+ 59, /* VIEW => ID */
+ 59, /* VIRTUAL => ID */
+ 59, /* WITH => ID */
+ 59, /* REINDEX => ID */
+ 59, /* RENAME => ID */
+ 59, /* CTIME_KW => ID */
};
#endif /* YYFALLBACK */
/* The state of the parser is completely contained in an instance of
** the following structure */
struct yyParser {
- int yyidx; /* Index of top element in stack */
+ yyStackEntry *yytos; /* Pointer to top element of the stack */
#ifdef YYTRACKMAXSTACKDEPTH
- int yyidxMax; /* Maximum value of yyidx */
+ int yyhwm; /* High-water mark of the stack */
#endif
+#ifndef YYNOERRORRECOVERY
int yyerrcnt; /* Shifts left before out of the error */
+#endif
sqlite3ParserARG_SDECL /* A place to hold %extra_argument */
#if YYSTACKDEPTH<=0
int yystksz; /* Current side of the stack */
yyStackEntry *yystack; /* The parser's stack */
+ yyStackEntry yystk0; /* First stack entry */
#else
yyStackEntry yystack[YYSTACKDEPTH]; /* The parser's stack */
+ yyStackEntry *yystackEnd; /* Last entry in the stack */
#endif
};
typedef struct yyParser yyParser;
}
#endif /* NDEBUG */
-#ifndef NDEBUG
+#if defined(YYCOVERAGE) || !defined(NDEBUG)
/* For tracing shifts, the names of all terminals and nonterminals
** are required. The following table supplies these names */
static const char *const yyTokenName[] = {
- "$", "SEMI", "EXPLAIN", "QUERY",
- "PLAN", "BEGIN", "TRANSACTION", "DEFERRED",
- "IMMEDIATE", "EXCLUSIVE", "COMMIT", "END",
- "ROLLBACK", "SAVEPOINT", "RELEASE", "TO",
- "TABLE", "CREATE", "IF", "NOT",
- "EXISTS", "TEMP", "LP", "RP",
- "AS", "WITHOUT", "COMMA", "ID",
- "INDEXED", "ABORT", "ACTION", "AFTER",
- "ANALYZE", "ASC", "ATTACH", "BEFORE",
- "BY", "CASCADE", "CAST", "COLUMNKW",
- "CONFLICT", "DATABASE", "DESC", "DETACH",
- "EACH", "FAIL", "FOR", "IGNORE",
- "INITIALLY", "INSTEAD", "LIKE_KW", "MATCH",
- "NO", "KEY", "OF", "OFFSET",
- "PRAGMA", "RAISE", "RECURSIVE", "REPLACE",
- "RESTRICT", "ROW", "TRIGGER", "VACUUM",
- "VIEW", "VIRTUAL", "WITH", "REINDEX",
- "RENAME", "CTIME_KW", "ANY", "OR",
- "AND", "IS", "BETWEEN", "IN",
- "ISNULL", "NOTNULL", "NE", "EQ",
- "GT", "LE", "LT", "GE",
- "ESCAPE", "BITAND", "BITOR", "LSHIFT",
- "RSHIFT", "PLUS", "MINUS", "STAR",
- "SLASH", "REM", "CONCAT", "COLLATE",
- "BITNOT", "STRING", "JOIN_KW", "CONSTRAINT",
- "DEFAULT", "NULL", "PRIMARY", "UNIQUE",
- "CHECK", "REFERENCES", "AUTOINCR", "ON",
- "INSERT", "DELETE", "UPDATE", "SET",
- "DEFERRABLE", "FOREIGN", "DROP", "UNION",
- "ALL", "EXCEPT", "INTERSECT", "SELECT",
- "VALUES", "DISTINCT", "DOT", "FROM",
- "JOIN", "USING", "ORDER", "GROUP",
- "HAVING", "LIMIT", "WHERE", "INTO",
- "INTEGER", "FLOAT", "BLOB", "VARIABLE",
- "CASE", "WHEN", "THEN", "ELSE",
- "INDEX", "ALTER", "ADD", "error",
- "input", "cmdlist", "ecmd", "explain",
- "cmdx", "cmd", "transtype", "trans_opt",
- "nm", "savepoint_opt", "create_table", "create_table_args",
- "createkw", "temp", "ifnotexists", "dbnm",
- "columnlist", "conslist_opt", "table_options", "select",
- "column", "columnid", "type", "carglist",
- "typetoken", "typename", "signed", "plus_num",
- "minus_num", "ccons", "term", "expr",
- "onconf", "sortorder", "autoinc", "eidlist_opt",
- "refargs", "defer_subclause", "refarg", "refact",
- "init_deferred_pred_opt", "conslist", "tconscomma", "tcons",
- "sortlist", "eidlist", "defer_subclause_opt", "orconf",
- "resolvetype", "raisetype", "ifexists", "fullname",
- "selectnowith", "oneselect", "with", "multiselect_op",
- "distinct", "selcollist", "from", "where_opt",
- "groupby_opt", "having_opt", "orderby_opt", "limit_opt",
- "values", "nexprlist", "exprlist", "sclp",
- "as", "seltablist", "stl_prefix", "joinop",
- "indexed_opt", "on_opt", "using_opt", "joinop2",
- "idlist", "setlist", "insert_cmd", "idlist_opt",
- "likeop", "between_op", "in_op", "case_operand",
- "case_exprlist", "case_else", "uniqueflag", "collate",
- "nmnum", "trigger_decl", "trigger_cmd_list", "trigger_time",
- "trigger_event", "foreach_clause", "when_clause", "trigger_cmd",
- "trnm", "tridxby", "database_kw_opt", "key_opt",
- "add_column_fullname", "kwcolumn_opt", "create_vtab", "vtabarglist",
- "vtabarg", "vtabargtoken", "lp", "anylist",
- "wqlist",
+ /* 0 */ "$",
+ /* 1 */ "SEMI",
+ /* 2 */ "EXPLAIN",
+ /* 3 */ "QUERY",
+ /* 4 */ "PLAN",
+ /* 5 */ "BEGIN",
+ /* 6 */ "TRANSACTION",
+ /* 7 */ "DEFERRED",
+ /* 8 */ "IMMEDIATE",
+ /* 9 */ "EXCLUSIVE",
+ /* 10 */ "COMMIT",
+ /* 11 */ "END",
+ /* 12 */ "ROLLBACK",
+ /* 13 */ "SAVEPOINT",
+ /* 14 */ "RELEASE",
+ /* 15 */ "TO",
+ /* 16 */ "TABLE",
+ /* 17 */ "CREATE",
+ /* 18 */ "IF",
+ /* 19 */ "NOT",
+ /* 20 */ "EXISTS",
+ /* 21 */ "TEMP",
+ /* 22 */ "LP",
+ /* 23 */ "RP",
+ /* 24 */ "AS",
+ /* 25 */ "WITHOUT",
+ /* 26 */ "COMMA",
+ /* 27 */ "ABORT",
+ /* 28 */ "ACTION",
+ /* 29 */ "AFTER",
+ /* 30 */ "ANALYZE",
+ /* 31 */ "ASC",
+ /* 32 */ "ATTACH",
+ /* 33 */ "BEFORE",
+ /* 34 */ "BY",
+ /* 35 */ "CASCADE",
+ /* 36 */ "CAST",
+ /* 37 */ "CONFLICT",
+ /* 38 */ "DATABASE",
+ /* 39 */ "DESC",
+ /* 40 */ "DETACH",
+ /* 41 */ "EACH",
+ /* 42 */ "FAIL",
+ /* 43 */ "OR",
+ /* 44 */ "AND",
+ /* 45 */ "IS",
+ /* 46 */ "MATCH",
+ /* 47 */ "LIKE_KW",
+ /* 48 */ "BETWEEN",
+ /* 49 */ "IN",
+ /* 50 */ "ISNULL",
+ /* 51 */ "NOTNULL",
+ /* 52 */ "NE",
+ /* 53 */ "EQ",
+ /* 54 */ "GT",
+ /* 55 */ "LE",
+ /* 56 */ "LT",
+ /* 57 */ "GE",
+ /* 58 */ "ESCAPE",
+ /* 59 */ "ID",
+ /* 60 */ "COLUMNKW",
+ /* 61 */ "FOR",
+ /* 62 */ "IGNORE",
+ /* 63 */ "INITIALLY",
+ /* 64 */ "INSTEAD",
+ /* 65 */ "NO",
+ /* 66 */ "KEY",
+ /* 67 */ "OF",
+ /* 68 */ "OFFSET",
+ /* 69 */ "PRAGMA",
+ /* 70 */ "RAISE",
+ /* 71 */ "RECURSIVE",
+ /* 72 */ "REPLACE",
+ /* 73 */ "RESTRICT",
+ /* 74 */ "ROW",
+ /* 75 */ "TRIGGER",
+ /* 76 */ "VACUUM",
+ /* 77 */ "VIEW",
+ /* 78 */ "VIRTUAL",
+ /* 79 */ "WITH",
+ /* 80 */ "REINDEX",
+ /* 81 */ "RENAME",
+ /* 82 */ "CTIME_KW",
+ /* 83 */ "ANY",
+ /* 84 */ "BITAND",
+ /* 85 */ "BITOR",
+ /* 86 */ "LSHIFT",
+ /* 87 */ "RSHIFT",
+ /* 88 */ "PLUS",
+ /* 89 */ "MINUS",
+ /* 90 */ "STAR",
+ /* 91 */ "SLASH",
+ /* 92 */ "REM",
+ /* 93 */ "CONCAT",
+ /* 94 */ "COLLATE",
+ /* 95 */ "BITNOT",
+ /* 96 */ "INDEXED",
+ /* 97 */ "STRING",
+ /* 98 */ "JOIN_KW",
+ /* 99 */ "CONSTRAINT",
+ /* 100 */ "DEFAULT",
+ /* 101 */ "NULL",
+ /* 102 */ "PRIMARY",
+ /* 103 */ "UNIQUE",
+ /* 104 */ "CHECK",
+ /* 105 */ "REFERENCES",
+ /* 106 */ "AUTOINCR",
+ /* 107 */ "ON",
+ /* 108 */ "INSERT",
+ /* 109 */ "DELETE",
+ /* 110 */ "UPDATE",
+ /* 111 */ "SET",
+ /* 112 */ "DEFERRABLE",
+ /* 113 */ "FOREIGN",
+ /* 114 */ "DROP",
+ /* 115 */ "UNION",
+ /* 116 */ "ALL",
+ /* 117 */ "EXCEPT",
+ /* 118 */ "INTERSECT",
+ /* 119 */ "SELECT",
+ /* 120 */ "VALUES",
+ /* 121 */ "DISTINCT",
+ /* 122 */ "DOT",
+ /* 123 */ "FROM",
+ /* 124 */ "JOIN",
+ /* 125 */ "USING",
+ /* 126 */ "ORDER",
+ /* 127 */ "GROUP",
+ /* 128 */ "HAVING",
+ /* 129 */ "LIMIT",
+ /* 130 */ "WHERE",
+ /* 131 */ "INTO",
+ /* 132 */ "FLOAT",
+ /* 133 */ "BLOB",
+ /* 134 */ "INTEGER",
+ /* 135 */ "VARIABLE",
+ /* 136 */ "CASE",
+ /* 137 */ "WHEN",
+ /* 138 */ "THEN",
+ /* 139 */ "ELSE",
+ /* 140 */ "INDEX",
+ /* 141 */ "ALTER",
+ /* 142 */ "ADD",
+ /* 143 */ "error",
+ /* 144 */ "input",
+ /* 145 */ "cmdlist",
+ /* 146 */ "ecmd",
+ /* 147 */ "explain",
+ /* 148 */ "cmdx",
+ /* 149 */ "cmd",
+ /* 150 */ "transtype",
+ /* 151 */ "trans_opt",
+ /* 152 */ "nm",
+ /* 153 */ "savepoint_opt",
+ /* 154 */ "create_table",
+ /* 155 */ "create_table_args",
+ /* 156 */ "createkw",
+ /* 157 */ "temp",
+ /* 158 */ "ifnotexists",
+ /* 159 */ "dbnm",
+ /* 160 */ "columnlist",
+ /* 161 */ "conslist_opt",
+ /* 162 */ "table_options",
+ /* 163 */ "select",
+ /* 164 */ "columnname",
+ /* 165 */ "carglist",
+ /* 166 */ "typetoken",
+ /* 167 */ "typename",
+ /* 168 */ "signed",
+ /* 169 */ "plus_num",
+ /* 170 */ "minus_num",
+ /* 171 */ "scanpt",
+ /* 172 */ "ccons",
+ /* 173 */ "term",
+ /* 174 */ "expr",
+ /* 175 */ "onconf",
+ /* 176 */ "sortorder",
+ /* 177 */ "autoinc",
+ /* 178 */ "eidlist_opt",
+ /* 179 */ "refargs",
+ /* 180 */ "defer_subclause",
+ /* 181 */ "refarg",
+ /* 182 */ "refact",
+ /* 183 */ "init_deferred_pred_opt",
+ /* 184 */ "conslist",
+ /* 185 */ "tconscomma",
+ /* 186 */ "tcons",
+ /* 187 */ "sortlist",
+ /* 188 */ "eidlist",
+ /* 189 */ "defer_subclause_opt",
+ /* 190 */ "orconf",
+ /* 191 */ "resolvetype",
+ /* 192 */ "raisetype",
+ /* 193 */ "ifexists",
+ /* 194 */ "fullname",
+ /* 195 */ "selectnowith",
+ /* 196 */ "oneselect",
+ /* 197 */ "with",
+ /* 198 */ "multiselect_op",
+ /* 199 */ "distinct",
+ /* 200 */ "selcollist",
+ /* 201 */ "from",
+ /* 202 */ "where_opt",
+ /* 203 */ "groupby_opt",
+ /* 204 */ "having_opt",
+ /* 205 */ "orderby_opt",
+ /* 206 */ "limit_opt",
+ /* 207 */ "values",
+ /* 208 */ "nexprlist",
+ /* 209 */ "exprlist",
+ /* 210 */ "sclp",
+ /* 211 */ "as",
+ /* 212 */ "seltablist",
+ /* 213 */ "stl_prefix",
+ /* 214 */ "joinop",
+ /* 215 */ "indexed_opt",
+ /* 216 */ "on_opt",
+ /* 217 */ "using_opt",
+ /* 218 */ "idlist",
+ /* 219 */ "setlist",
+ /* 220 */ "insert_cmd",
+ /* 221 */ "idlist_opt",
+ /* 222 */ "likeop",
+ /* 223 */ "between_op",
+ /* 224 */ "in_op",
+ /* 225 */ "paren_exprlist",
+ /* 226 */ "case_operand",
+ /* 227 */ "case_exprlist",
+ /* 228 */ "case_else",
+ /* 229 */ "uniqueflag",
+ /* 230 */ "collate",
+ /* 231 */ "nmnum",
+ /* 232 */ "trigger_decl",
+ /* 233 */ "trigger_cmd_list",
+ /* 234 */ "trigger_time",
+ /* 235 */ "trigger_event",
+ /* 236 */ "foreach_clause",
+ /* 237 */ "when_clause",
+ /* 238 */ "trigger_cmd",
+ /* 239 */ "trnm",
+ /* 240 */ "tridxby",
+ /* 241 */ "database_kw_opt",
+ /* 242 */ "key_opt",
+ /* 243 */ "add_column_fullname",
+ /* 244 */ "kwcolumn_opt",
+ /* 245 */ "create_vtab",
+ /* 246 */ "vtabarglist",
+ /* 247 */ "vtabarg",
+ /* 248 */ "vtabargtoken",
+ /* 249 */ "lp",
+ /* 250 */ "anylist",
+ /* 251 */ "wqlist",
};
-#endif /* NDEBUG */
+#endif /* defined(YYCOVERAGE) || !defined(NDEBUG) */
#ifndef NDEBUG
/* For tracing reduce actions, the names of all rules are required.
*/
static const char *const yyRuleName[] = {
- /* 0 */ "input ::= cmdlist",
- /* 1 */ "cmdlist ::= cmdlist ecmd",
- /* 2 */ "cmdlist ::= ecmd",
- /* 3 */ "ecmd ::= SEMI",
- /* 4 */ "ecmd ::= explain cmdx SEMI",
- /* 5 */ "explain ::=",
- /* 6 */ "explain ::= EXPLAIN",
- /* 7 */ "explain ::= EXPLAIN QUERY PLAN",
- /* 8 */ "cmdx ::= cmd",
- /* 9 */ "cmd ::= BEGIN transtype trans_opt",
- /* 10 */ "trans_opt ::=",
- /* 11 */ "trans_opt ::= TRANSACTION",
- /* 12 */ "trans_opt ::= TRANSACTION nm",
- /* 13 */ "transtype ::=",
- /* 14 */ "transtype ::= DEFERRED",
- /* 15 */ "transtype ::= IMMEDIATE",
- /* 16 */ "transtype ::= EXCLUSIVE",
- /* 17 */ "cmd ::= COMMIT trans_opt",
- /* 18 */ "cmd ::= END trans_opt",
- /* 19 */ "cmd ::= ROLLBACK trans_opt",
- /* 20 */ "savepoint_opt ::= SAVEPOINT",
- /* 21 */ "savepoint_opt ::=",
- /* 22 */ "cmd ::= SAVEPOINT nm",
- /* 23 */ "cmd ::= RELEASE savepoint_opt nm",
- /* 24 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm",
- /* 25 */ "cmd ::= create_table create_table_args",
- /* 26 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm",
- /* 27 */ "createkw ::= CREATE",
- /* 28 */ "ifnotexists ::=",
- /* 29 */ "ifnotexists ::= IF NOT EXISTS",
- /* 30 */ "temp ::= TEMP",
- /* 31 */ "temp ::=",
- /* 32 */ "create_table_args ::= LP columnlist conslist_opt RP table_options",
- /* 33 */ "create_table_args ::= AS select",
- /* 34 */ "table_options ::=",
- /* 35 */ "table_options ::= WITHOUT nm",
- /* 36 */ "columnlist ::= columnlist COMMA column",
- /* 37 */ "columnlist ::= column",
- /* 38 */ "column ::= columnid type carglist",
- /* 39 */ "columnid ::= nm",
- /* 40 */ "nm ::= ID|INDEXED",
- /* 41 */ "nm ::= STRING",
- /* 42 */ "nm ::= JOIN_KW",
- /* 43 */ "type ::=",
- /* 44 */ "type ::= typetoken",
- /* 45 */ "typetoken ::= typename",
- /* 46 */ "typetoken ::= typename LP signed RP",
- /* 47 */ "typetoken ::= typename LP signed COMMA signed RP",
- /* 48 */ "typename ::= ID|STRING",
- /* 49 */ "typename ::= typename ID|STRING",
- /* 50 */ "signed ::= plus_num",
- /* 51 */ "signed ::= minus_num",
- /* 52 */ "carglist ::= carglist ccons",
- /* 53 */ "carglist ::=",
- /* 54 */ "ccons ::= CONSTRAINT nm",
- /* 55 */ "ccons ::= DEFAULT term",
- /* 56 */ "ccons ::= DEFAULT LP expr RP",
- /* 57 */ "ccons ::= DEFAULT PLUS term",
- /* 58 */ "ccons ::= DEFAULT MINUS term",
- /* 59 */ "ccons ::= DEFAULT ID|INDEXED",
- /* 60 */ "ccons ::= NULL onconf",
- /* 61 */ "ccons ::= NOT NULL onconf",
- /* 62 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc",
- /* 63 */ "ccons ::= UNIQUE onconf",
- /* 64 */ "ccons ::= CHECK LP expr RP",
- /* 65 */ "ccons ::= REFERENCES nm eidlist_opt refargs",
- /* 66 */ "ccons ::= defer_subclause",
- /* 67 */ "ccons ::= COLLATE ID|STRING",
- /* 68 */ "autoinc ::=",
- /* 69 */ "autoinc ::= AUTOINCR",
- /* 70 */ "refargs ::=",
- /* 71 */ "refargs ::= refargs refarg",
- /* 72 */ "refarg ::= MATCH nm",
- /* 73 */ "refarg ::= ON INSERT refact",
- /* 74 */ "refarg ::= ON DELETE refact",
- /* 75 */ "refarg ::= ON UPDATE refact",
- /* 76 */ "refact ::= SET NULL",
- /* 77 */ "refact ::= SET DEFAULT",
- /* 78 */ "refact ::= CASCADE",
- /* 79 */ "refact ::= RESTRICT",
- /* 80 */ "refact ::= NO ACTION",
- /* 81 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt",
- /* 82 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt",
- /* 83 */ "init_deferred_pred_opt ::=",
- /* 84 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED",
- /* 85 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE",
- /* 86 */ "conslist_opt ::=",
- /* 87 */ "conslist_opt ::= COMMA conslist",
- /* 88 */ "conslist ::= conslist tconscomma tcons",
- /* 89 */ "conslist ::= tcons",
- /* 90 */ "tconscomma ::= COMMA",
- /* 91 */ "tconscomma ::=",
- /* 92 */ "tcons ::= CONSTRAINT nm",
- /* 93 */ "tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf",
- /* 94 */ "tcons ::= UNIQUE LP sortlist RP onconf",
- /* 95 */ "tcons ::= CHECK LP expr RP onconf",
- /* 96 */ "tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt",
- /* 97 */ "defer_subclause_opt ::=",
- /* 98 */ "defer_subclause_opt ::= defer_subclause",
- /* 99 */ "onconf ::=",
- /* 100 */ "onconf ::= ON CONFLICT resolvetype",
- /* 101 */ "orconf ::=",
- /* 102 */ "orconf ::= OR resolvetype",
- /* 103 */ "resolvetype ::= raisetype",
- /* 104 */ "resolvetype ::= IGNORE",
- /* 105 */ "resolvetype ::= REPLACE",
- /* 106 */ "cmd ::= DROP TABLE ifexists fullname",
- /* 107 */ "ifexists ::= IF EXISTS",
- /* 108 */ "ifexists ::=",
- /* 109 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select",
- /* 110 */ "cmd ::= DROP VIEW ifexists fullname",
- /* 111 */ "cmd ::= select",
- /* 112 */ "select ::= with selectnowith",
- /* 113 */ "selectnowith ::= oneselect",
- /* 114 */ "selectnowith ::= selectnowith multiselect_op oneselect",
- /* 115 */ "multiselect_op ::= UNION",
- /* 116 */ "multiselect_op ::= UNION ALL",
- /* 117 */ "multiselect_op ::= EXCEPT|INTERSECT",
- /* 118 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt",
- /* 119 */ "oneselect ::= values",
- /* 120 */ "values ::= VALUES LP nexprlist RP",
- /* 121 */ "values ::= values COMMA LP exprlist RP",
- /* 122 */ "distinct ::= DISTINCT",
- /* 123 */ "distinct ::= ALL",
- /* 124 */ "distinct ::=",
- /* 125 */ "sclp ::= selcollist COMMA",
- /* 126 */ "sclp ::=",
- /* 127 */ "selcollist ::= sclp expr as",
- /* 128 */ "selcollist ::= sclp STAR",
- /* 129 */ "selcollist ::= sclp nm DOT STAR",
- /* 130 */ "as ::= AS nm",
- /* 131 */ "as ::= ID|STRING",
- /* 132 */ "as ::=",
- /* 133 */ "from ::=",
- /* 134 */ "from ::= FROM seltablist",
- /* 135 */ "stl_prefix ::= seltablist joinop",
- /* 136 */ "stl_prefix ::=",
- /* 137 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt",
- /* 138 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt",
- /* 139 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt",
- /* 140 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt",
- /* 141 */ "dbnm ::=",
- /* 142 */ "dbnm ::= DOT nm",
- /* 143 */ "fullname ::= nm dbnm",
- /* 144 */ "joinop ::= COMMA|JOIN",
- /* 145 */ "joinop ::= JOIN_KW JOIN",
- /* 146 */ "joinop ::= JOIN_KW nm JOIN",
- /* 147 */ "joinop ::= JOIN_KW nm nm JOIN",
- /* 148 */ "on_opt ::= ON expr",
- /* 149 */ "on_opt ::=",
- /* 150 */ "indexed_opt ::=",
- /* 151 */ "indexed_opt ::= INDEXED BY nm",
- /* 152 */ "indexed_opt ::= NOT INDEXED",
- /* 153 */ "using_opt ::= USING LP idlist RP",
- /* 154 */ "using_opt ::=",
- /* 155 */ "orderby_opt ::=",
- /* 156 */ "orderby_opt ::= ORDER BY sortlist",
- /* 157 */ "sortlist ::= sortlist COMMA expr sortorder",
- /* 158 */ "sortlist ::= expr sortorder",
- /* 159 */ "sortorder ::= ASC",
- /* 160 */ "sortorder ::= DESC",
- /* 161 */ "sortorder ::=",
- /* 162 */ "groupby_opt ::=",
- /* 163 */ "groupby_opt ::= GROUP BY nexprlist",
- /* 164 */ "having_opt ::=",
- /* 165 */ "having_opt ::= HAVING expr",
- /* 166 */ "limit_opt ::=",
- /* 167 */ "limit_opt ::= LIMIT expr",
- /* 168 */ "limit_opt ::= LIMIT expr OFFSET expr",
- /* 169 */ "limit_opt ::= LIMIT expr COMMA expr",
- /* 170 */ "cmd ::= with DELETE FROM fullname indexed_opt where_opt",
- /* 171 */ "where_opt ::=",
- /* 172 */ "where_opt ::= WHERE expr",
- /* 173 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt",
- /* 174 */ "setlist ::= setlist COMMA nm EQ expr",
- /* 175 */ "setlist ::= nm EQ expr",
- /* 176 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select",
- /* 177 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES",
- /* 178 */ "insert_cmd ::= INSERT orconf",
- /* 179 */ "insert_cmd ::= REPLACE",
- /* 180 */ "idlist_opt ::=",
- /* 181 */ "idlist_opt ::= LP idlist RP",
- /* 182 */ "idlist ::= idlist COMMA nm",
- /* 183 */ "idlist ::= nm",
- /* 184 */ "expr ::= term",
- /* 185 */ "expr ::= LP expr RP",
- /* 186 */ "term ::= NULL",
- /* 187 */ "expr ::= ID|INDEXED",
- /* 188 */ "expr ::= JOIN_KW",
- /* 189 */ "expr ::= nm DOT nm",
- /* 190 */ "expr ::= nm DOT nm DOT nm",
- /* 191 */ "term ::= INTEGER|FLOAT|BLOB",
- /* 192 */ "term ::= STRING",
- /* 193 */ "expr ::= VARIABLE",
- /* 194 */ "expr ::= expr COLLATE ID|STRING",
- /* 195 */ "expr ::= CAST LP expr AS typetoken RP",
- /* 196 */ "expr ::= ID|INDEXED LP distinct exprlist RP",
- /* 197 */ "expr ::= ID|INDEXED LP STAR RP",
- /* 198 */ "term ::= CTIME_KW",
- /* 199 */ "expr ::= expr AND expr",
- /* 200 */ "expr ::= expr OR expr",
- /* 201 */ "expr ::= expr LT|GT|GE|LE expr",
- /* 202 */ "expr ::= expr EQ|NE expr",
- /* 203 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr",
- /* 204 */ "expr ::= expr PLUS|MINUS expr",
- /* 205 */ "expr ::= expr STAR|SLASH|REM expr",
- /* 206 */ "expr ::= expr CONCAT expr",
- /* 207 */ "likeop ::= LIKE_KW|MATCH",
- /* 208 */ "likeop ::= NOT LIKE_KW|MATCH",
- /* 209 */ "expr ::= expr likeop expr",
- /* 210 */ "expr ::= expr likeop expr ESCAPE expr",
- /* 211 */ "expr ::= expr ISNULL|NOTNULL",
- /* 212 */ "expr ::= expr NOT NULL",
- /* 213 */ "expr ::= expr IS expr",
- /* 214 */ "expr ::= expr IS NOT expr",
- /* 215 */ "expr ::= NOT expr",
- /* 216 */ "expr ::= BITNOT expr",
- /* 217 */ "expr ::= MINUS expr",
- /* 218 */ "expr ::= PLUS expr",
- /* 219 */ "between_op ::= BETWEEN",
- /* 220 */ "between_op ::= NOT BETWEEN",
- /* 221 */ "expr ::= expr between_op expr AND expr",
- /* 222 */ "in_op ::= IN",
- /* 223 */ "in_op ::= NOT IN",
- /* 224 */ "expr ::= expr in_op LP exprlist RP",
- /* 225 */ "expr ::= LP select RP",
- /* 226 */ "expr ::= expr in_op LP select RP",
- /* 227 */ "expr ::= expr in_op nm dbnm",
- /* 228 */ "expr ::= EXISTS LP select RP",
- /* 229 */ "expr ::= CASE case_operand case_exprlist case_else END",
- /* 230 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr",
- /* 231 */ "case_exprlist ::= WHEN expr THEN expr",
- /* 232 */ "case_else ::= ELSE expr",
- /* 233 */ "case_else ::=",
- /* 234 */ "case_operand ::= expr",
- /* 235 */ "case_operand ::=",
- /* 236 */ "exprlist ::= nexprlist",
- /* 237 */ "exprlist ::=",
- /* 238 */ "nexprlist ::= nexprlist COMMA expr",
- /* 239 */ "nexprlist ::= expr",
- /* 240 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt",
- /* 241 */ "uniqueflag ::= UNIQUE",
- /* 242 */ "uniqueflag ::=",
- /* 243 */ "eidlist_opt ::=",
- /* 244 */ "eidlist_opt ::= LP eidlist RP",
- /* 245 */ "eidlist ::= eidlist COMMA nm collate sortorder",
- /* 246 */ "eidlist ::= nm collate sortorder",
- /* 247 */ "collate ::=",
- /* 248 */ "collate ::= COLLATE ID|STRING",
- /* 249 */ "cmd ::= DROP INDEX ifexists fullname",
- /* 250 */ "cmd ::= VACUUM",
- /* 251 */ "cmd ::= VACUUM nm",
- /* 252 */ "cmd ::= PRAGMA nm dbnm",
- /* 253 */ "cmd ::= PRAGMA nm dbnm EQ nmnum",
- /* 254 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP",
- /* 255 */ "cmd ::= PRAGMA nm dbnm EQ minus_num",
- /* 256 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP",
- /* 257 */ "nmnum ::= plus_num",
- /* 258 */ "nmnum ::= nm",
- /* 259 */ "nmnum ::= ON",
- /* 260 */ "nmnum ::= DELETE",
- /* 261 */ "nmnum ::= DEFAULT",
- /* 262 */ "plus_num ::= PLUS INTEGER|FLOAT",
- /* 263 */ "plus_num ::= INTEGER|FLOAT",
- /* 264 */ "minus_num ::= MINUS INTEGER|FLOAT",
- /* 265 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END",
- /* 266 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause",
- /* 267 */ "trigger_time ::= BEFORE",
- /* 268 */ "trigger_time ::= AFTER",
- /* 269 */ "trigger_time ::= INSTEAD OF",
- /* 270 */ "trigger_time ::=",
- /* 271 */ "trigger_event ::= DELETE|INSERT",
- /* 272 */ "trigger_event ::= UPDATE",
- /* 273 */ "trigger_event ::= UPDATE OF idlist",
- /* 274 */ "foreach_clause ::=",
- /* 275 */ "foreach_clause ::= FOR EACH ROW",
- /* 276 */ "when_clause ::=",
- /* 277 */ "when_clause ::= WHEN expr",
- /* 278 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI",
- /* 279 */ "trigger_cmd_list ::= trigger_cmd SEMI",
- /* 280 */ "trnm ::= nm",
- /* 281 */ "trnm ::= nm DOT nm",
- /* 282 */ "tridxby ::=",
- /* 283 */ "tridxby ::= INDEXED BY nm",
- /* 284 */ "tridxby ::= NOT INDEXED",
- /* 285 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt",
- /* 286 */ "trigger_cmd ::= insert_cmd INTO trnm idlist_opt select",
- /* 287 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt",
- /* 288 */ "trigger_cmd ::= select",
- /* 289 */ "expr ::= RAISE LP IGNORE RP",
- /* 290 */ "expr ::= RAISE LP raisetype COMMA nm RP",
- /* 291 */ "raisetype ::= ROLLBACK",
- /* 292 */ "raisetype ::= ABORT",
- /* 293 */ "raisetype ::= FAIL",
- /* 294 */ "cmd ::= DROP TRIGGER ifexists fullname",
- /* 295 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt",
- /* 296 */ "cmd ::= DETACH database_kw_opt expr",
- /* 297 */ "key_opt ::=",
- /* 298 */ "key_opt ::= KEY expr",
- /* 299 */ "database_kw_opt ::= DATABASE",
- /* 300 */ "database_kw_opt ::=",
- /* 301 */ "cmd ::= REINDEX",
- /* 302 */ "cmd ::= REINDEX nm dbnm",
- /* 303 */ "cmd ::= ANALYZE",
- /* 304 */ "cmd ::= ANALYZE nm dbnm",
- /* 305 */ "cmd ::= ALTER TABLE fullname RENAME TO nm",
- /* 306 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column",
- /* 307 */ "add_column_fullname ::= fullname",
- /* 308 */ "kwcolumn_opt ::=",
- /* 309 */ "kwcolumn_opt ::= COLUMNKW",
- /* 310 */ "cmd ::= create_vtab",
- /* 311 */ "cmd ::= create_vtab LP vtabarglist RP",
- /* 312 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm",
- /* 313 */ "vtabarglist ::= vtabarg",
- /* 314 */ "vtabarglist ::= vtabarglist COMMA vtabarg",
- /* 315 */ "vtabarg ::=",
- /* 316 */ "vtabarg ::= vtabarg vtabargtoken",
- /* 317 */ "vtabargtoken ::= ANY",
- /* 318 */ "vtabargtoken ::= lp anylist RP",
- /* 319 */ "lp ::= LP",
- /* 320 */ "anylist ::=",
- /* 321 */ "anylist ::= anylist LP anylist RP",
- /* 322 */ "anylist ::= anylist ANY",
- /* 323 */ "with ::=",
- /* 324 */ "with ::= WITH wqlist",
- /* 325 */ "with ::= WITH RECURSIVE wqlist",
- /* 326 */ "wqlist ::= nm eidlist_opt AS LP select RP",
- /* 327 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP",
+ /* 0 */ "explain ::= EXPLAIN",
+ /* 1 */ "explain ::= EXPLAIN QUERY PLAN",
+ /* 2 */ "cmdx ::= cmd",
+ /* 3 */ "cmd ::= BEGIN transtype trans_opt",
+ /* 4 */ "transtype ::=",
+ /* 5 */ "transtype ::= DEFERRED",
+ /* 6 */ "transtype ::= IMMEDIATE",
+ /* 7 */ "transtype ::= EXCLUSIVE",
+ /* 8 */ "cmd ::= COMMIT|END trans_opt",
+ /* 9 */ "cmd ::= ROLLBACK trans_opt",
+ /* 10 */ "cmd ::= SAVEPOINT nm",
+ /* 11 */ "cmd ::= RELEASE savepoint_opt nm",
+ /* 12 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm",
+ /* 13 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm",
+ /* 14 */ "createkw ::= CREATE",
+ /* 15 */ "ifnotexists ::=",
+ /* 16 */ "ifnotexists ::= IF NOT EXISTS",
+ /* 17 */ "temp ::= TEMP",
+ /* 18 */ "temp ::=",
+ /* 19 */ "create_table_args ::= LP columnlist conslist_opt RP table_options",
+ /* 20 */ "create_table_args ::= AS select",
+ /* 21 */ "table_options ::=",
+ /* 22 */ "table_options ::= WITHOUT nm",
+ /* 23 */ "columnname ::= nm typetoken",
+ /* 24 */ "typetoken ::=",
+ /* 25 */ "typetoken ::= typename LP signed RP",
+ /* 26 */ "typetoken ::= typename LP signed COMMA signed RP",
+ /* 27 */ "typename ::= typename ID|STRING",
+ /* 28 */ "scanpt ::=",
+ /* 29 */ "ccons ::= CONSTRAINT nm",
+ /* 30 */ "ccons ::= DEFAULT scanpt term scanpt",
+ /* 31 */ "ccons ::= DEFAULT LP expr RP",
+ /* 32 */ "ccons ::= DEFAULT PLUS term scanpt",
+ /* 33 */ "ccons ::= DEFAULT MINUS term scanpt",
+ /* 34 */ "ccons ::= DEFAULT scanpt ID|INDEXED",
+ /* 35 */ "ccons ::= NOT NULL onconf",
+ /* 36 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc",
+ /* 37 */ "ccons ::= UNIQUE onconf",
+ /* 38 */ "ccons ::= CHECK LP expr RP",
+ /* 39 */ "ccons ::= REFERENCES nm eidlist_opt refargs",
+ /* 40 */ "ccons ::= defer_subclause",
+ /* 41 */ "ccons ::= COLLATE ID|STRING",
+ /* 42 */ "autoinc ::=",
+ /* 43 */ "autoinc ::= AUTOINCR",
+ /* 44 */ "refargs ::=",
+ /* 45 */ "refargs ::= refargs refarg",
+ /* 46 */ "refarg ::= MATCH nm",
+ /* 47 */ "refarg ::= ON INSERT refact",
+ /* 48 */ "refarg ::= ON DELETE refact",
+ /* 49 */ "refarg ::= ON UPDATE refact",
+ /* 50 */ "refact ::= SET NULL",
+ /* 51 */ "refact ::= SET DEFAULT",
+ /* 52 */ "refact ::= CASCADE",
+ /* 53 */ "refact ::= RESTRICT",
+ /* 54 */ "refact ::= NO ACTION",
+ /* 55 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt",
+ /* 56 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt",
+ /* 57 */ "init_deferred_pred_opt ::=",
+ /* 58 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED",
+ /* 59 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE",
+ /* 60 */ "conslist_opt ::=",
+ /* 61 */ "tconscomma ::= COMMA",
+ /* 62 */ "tcons ::= CONSTRAINT nm",
+ /* 63 */ "tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf",
+ /* 64 */ "tcons ::= UNIQUE LP sortlist RP onconf",
+ /* 65 */ "tcons ::= CHECK LP expr RP onconf",
+ /* 66 */ "tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt",
+ /* 67 */ "defer_subclause_opt ::=",
+ /* 68 */ "onconf ::=",
+ /* 69 */ "onconf ::= ON CONFLICT resolvetype",
+ /* 70 */ "orconf ::=",
+ /* 71 */ "orconf ::= OR resolvetype",
+ /* 72 */ "resolvetype ::= IGNORE",
+ /* 73 */ "resolvetype ::= REPLACE",
+ /* 74 */ "cmd ::= DROP TABLE ifexists fullname",
+ /* 75 */ "ifexists ::= IF EXISTS",
+ /* 76 */ "ifexists ::=",
+ /* 77 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select",
+ /* 78 */ "cmd ::= DROP VIEW ifexists fullname",
+ /* 79 */ "cmd ::= select",
+ /* 80 */ "select ::= with selectnowith",
+ /* 81 */ "selectnowith ::= selectnowith multiselect_op oneselect",
+ /* 82 */ "multiselect_op ::= UNION",
+ /* 83 */ "multiselect_op ::= UNION ALL",
+ /* 84 */ "multiselect_op ::= EXCEPT|INTERSECT",
+ /* 85 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt",
+ /* 86 */ "values ::= VALUES LP nexprlist RP",
+ /* 87 */ "values ::= values COMMA LP exprlist RP",
+ /* 88 */ "distinct ::= DISTINCT",
+ /* 89 */ "distinct ::= ALL",
+ /* 90 */ "distinct ::=",
+ /* 91 */ "sclp ::=",
+ /* 92 */ "selcollist ::= sclp scanpt expr scanpt as",
+ /* 93 */ "selcollist ::= sclp scanpt STAR",
+ /* 94 */ "selcollist ::= sclp scanpt nm DOT STAR",
+ /* 95 */ "as ::= AS nm",
+ /* 96 */ "as ::=",
+ /* 97 */ "from ::=",
+ /* 98 */ "from ::= FROM seltablist",
+ /* 99 */ "stl_prefix ::= seltablist joinop",
+ /* 100 */ "stl_prefix ::=",
+ /* 101 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt",
+ /* 102 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt",
+ /* 103 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt",
+ /* 104 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt",
+ /* 105 */ "dbnm ::=",
+ /* 106 */ "dbnm ::= DOT nm",
+ /* 107 */ "fullname ::= nm dbnm",
+ /* 108 */ "joinop ::= COMMA|JOIN",
+ /* 109 */ "joinop ::= JOIN_KW JOIN",
+ /* 110 */ "joinop ::= JOIN_KW nm JOIN",
+ /* 111 */ "joinop ::= JOIN_KW nm nm JOIN",
+ /* 112 */ "on_opt ::= ON expr",
+ /* 113 */ "on_opt ::=",
+ /* 114 */ "indexed_opt ::=",
+ /* 115 */ "indexed_opt ::= INDEXED BY nm",
+ /* 116 */ "indexed_opt ::= NOT INDEXED",
+ /* 117 */ "using_opt ::= USING LP idlist RP",
+ /* 118 */ "using_opt ::=",
+ /* 119 */ "orderby_opt ::=",
+ /* 120 */ "orderby_opt ::= ORDER BY sortlist",
+ /* 121 */ "sortlist ::= sortlist COMMA expr sortorder",
+ /* 122 */ "sortlist ::= expr sortorder",
+ /* 123 */ "sortorder ::= ASC",
+ /* 124 */ "sortorder ::= DESC",
+ /* 125 */ "sortorder ::=",
+ /* 126 */ "groupby_opt ::=",
+ /* 127 */ "groupby_opt ::= GROUP BY nexprlist",
+ /* 128 */ "having_opt ::=",
+ /* 129 */ "having_opt ::= HAVING expr",
+ /* 130 */ "limit_opt ::=",
+ /* 131 */ "limit_opt ::= LIMIT expr",
+ /* 132 */ "limit_opt ::= LIMIT expr OFFSET expr",
+ /* 133 */ "limit_opt ::= LIMIT expr COMMA expr",
+ /* 134 */ "cmd ::= with DELETE FROM fullname indexed_opt where_opt",
+ /* 135 */ "where_opt ::=",
+ /* 136 */ "where_opt ::= WHERE expr",
+ /* 137 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt",
+ /* 138 */ "setlist ::= setlist COMMA nm EQ expr",
+ /* 139 */ "setlist ::= setlist COMMA LP idlist RP EQ expr",
+ /* 140 */ "setlist ::= nm EQ expr",
+ /* 141 */ "setlist ::= LP idlist RP EQ expr",
+ /* 142 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select",
+ /* 143 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES",
+ /* 144 */ "insert_cmd ::= INSERT orconf",
+ /* 145 */ "insert_cmd ::= REPLACE",
+ /* 146 */ "idlist_opt ::=",
+ /* 147 */ "idlist_opt ::= LP idlist RP",
+ /* 148 */ "idlist ::= idlist COMMA nm",
+ /* 149 */ "idlist ::= nm",
+ /* 150 */ "expr ::= LP expr RP",
+ /* 151 */ "expr ::= ID|INDEXED",
+ /* 152 */ "expr ::= JOIN_KW",
+ /* 153 */ "expr ::= nm DOT nm",
+ /* 154 */ "expr ::= nm DOT nm DOT nm",
+ /* 155 */ "term ::= NULL|FLOAT|BLOB",
+ /* 156 */ "term ::= STRING",
+ /* 157 */ "term ::= INTEGER",
+ /* 158 */ "expr ::= VARIABLE",
+ /* 159 */ "expr ::= expr COLLATE ID|STRING",
+ /* 160 */ "expr ::= CAST LP expr AS typetoken RP",
+ /* 161 */ "expr ::= ID|INDEXED LP distinct exprlist RP",
+ /* 162 */ "expr ::= ID|INDEXED LP STAR RP",
+ /* 163 */ "term ::= CTIME_KW",
+ /* 164 */ "expr ::= LP nexprlist COMMA expr RP",
+ /* 165 */ "expr ::= expr AND expr",
+ /* 166 */ "expr ::= expr OR expr",
+ /* 167 */ "expr ::= expr LT|GT|GE|LE expr",
+ /* 168 */ "expr ::= expr EQ|NE expr",
+ /* 169 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr",
+ /* 170 */ "expr ::= expr PLUS|MINUS expr",
+ /* 171 */ "expr ::= expr STAR|SLASH|REM expr",
+ /* 172 */ "expr ::= expr CONCAT expr",
+ /* 173 */ "likeop ::= NOT LIKE_KW|MATCH",
+ /* 174 */ "expr ::= expr likeop expr",
+ /* 175 */ "expr ::= expr likeop expr ESCAPE expr",
+ /* 176 */ "expr ::= expr ISNULL|NOTNULL",
+ /* 177 */ "expr ::= expr NOT NULL",
+ /* 178 */ "expr ::= expr IS expr",
+ /* 179 */ "expr ::= expr IS NOT expr",
+ /* 180 */ "expr ::= NOT expr",
+ /* 181 */ "expr ::= BITNOT expr",
+ /* 182 */ "expr ::= MINUS expr",
+ /* 183 */ "expr ::= PLUS expr",
+ /* 184 */ "between_op ::= BETWEEN",
+ /* 185 */ "between_op ::= NOT BETWEEN",
+ /* 186 */ "expr ::= expr between_op expr AND expr",
+ /* 187 */ "in_op ::= IN",
+ /* 188 */ "in_op ::= NOT IN",
+ /* 189 */ "expr ::= expr in_op LP exprlist RP",
+ /* 190 */ "expr ::= LP select RP",
+ /* 191 */ "expr ::= expr in_op LP select RP",
+ /* 192 */ "expr ::= expr in_op nm dbnm paren_exprlist",
+ /* 193 */ "expr ::= EXISTS LP select RP",
+ /* 194 */ "expr ::= CASE case_operand case_exprlist case_else END",
+ /* 195 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr",
+ /* 196 */ "case_exprlist ::= WHEN expr THEN expr",
+ /* 197 */ "case_else ::= ELSE expr",
+ /* 198 */ "case_else ::=",
+ /* 199 */ "case_operand ::= expr",
+ /* 200 */ "case_operand ::=",
+ /* 201 */ "exprlist ::=",
+ /* 202 */ "nexprlist ::= nexprlist COMMA expr",
+ /* 203 */ "nexprlist ::= expr",
+ /* 204 */ "paren_exprlist ::=",
+ /* 205 */ "paren_exprlist ::= LP exprlist RP",
+ /* 206 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt",
+ /* 207 */ "uniqueflag ::= UNIQUE",
+ /* 208 */ "uniqueflag ::=",
+ /* 209 */ "eidlist_opt ::=",
+ /* 210 */ "eidlist_opt ::= LP eidlist RP",
+ /* 211 */ "eidlist ::= eidlist COMMA nm collate sortorder",
+ /* 212 */ "eidlist ::= nm collate sortorder",
+ /* 213 */ "collate ::=",
+ /* 214 */ "collate ::= COLLATE ID|STRING",
+ /* 215 */ "cmd ::= DROP INDEX ifexists fullname",
+ /* 216 */ "cmd ::= VACUUM",
+ /* 217 */ "cmd ::= VACUUM nm",
+ /* 218 */ "cmd ::= PRAGMA nm dbnm",
+ /* 219 */ "cmd ::= PRAGMA nm dbnm EQ nmnum",
+ /* 220 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP",
+ /* 221 */ "cmd ::= PRAGMA nm dbnm EQ minus_num",
+ /* 222 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP",
+ /* 223 */ "plus_num ::= PLUS INTEGER|FLOAT",
+ /* 224 */ "minus_num ::= MINUS INTEGER|FLOAT",
+ /* 225 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END",
+ /* 226 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause",
+ /* 227 */ "trigger_time ::= BEFORE|AFTER",
+ /* 228 */ "trigger_time ::= INSTEAD OF",
+ /* 229 */ "trigger_time ::=",
+ /* 230 */ "trigger_event ::= DELETE|INSERT",
+ /* 231 */ "trigger_event ::= UPDATE",
+ /* 232 */ "trigger_event ::= UPDATE OF idlist",
+ /* 233 */ "when_clause ::=",
+ /* 234 */ "when_clause ::= WHEN expr",
+ /* 235 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI",
+ /* 236 */ "trigger_cmd_list ::= trigger_cmd SEMI",
+ /* 237 */ "trnm ::= nm DOT nm",
+ /* 238 */ "tridxby ::= INDEXED BY nm",
+ /* 239 */ "tridxby ::= NOT INDEXED",
+ /* 240 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt",
+ /* 241 */ "trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select scanpt",
+ /* 242 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt",
+ /* 243 */ "trigger_cmd ::= scanpt select scanpt",
+ /* 244 */ "expr ::= RAISE LP IGNORE RP",
+ /* 245 */ "expr ::= RAISE LP raisetype COMMA nm RP",
+ /* 246 */ "raisetype ::= ROLLBACK",
+ /* 247 */ "raisetype ::= ABORT",
+ /* 248 */ "raisetype ::= FAIL",
+ /* 249 */ "cmd ::= DROP TRIGGER ifexists fullname",
+ /* 250 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt",
+ /* 251 */ "cmd ::= DETACH database_kw_opt expr",
+ /* 252 */ "key_opt ::=",
+ /* 253 */ "key_opt ::= KEY expr",
+ /* 254 */ "cmd ::= REINDEX",
+ /* 255 */ "cmd ::= REINDEX nm dbnm",
+ /* 256 */ "cmd ::= ANALYZE",
+ /* 257 */ "cmd ::= ANALYZE nm dbnm",
+ /* 258 */ "cmd ::= ALTER TABLE fullname RENAME TO nm",
+ /* 259 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist",
+ /* 260 */ "add_column_fullname ::= fullname",
+ /* 261 */ "cmd ::= create_vtab",
+ /* 262 */ "cmd ::= create_vtab LP vtabarglist RP",
+ /* 263 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm",
+ /* 264 */ "vtabarg ::=",
+ /* 265 */ "vtabargtoken ::= ANY",
+ /* 266 */ "vtabargtoken ::= lp anylist RP",
+ /* 267 */ "lp ::= LP",
+ /* 268 */ "with ::=",
+ /* 269 */ "with ::= WITH wqlist",
+ /* 270 */ "with ::= WITH RECURSIVE wqlist",
+ /* 271 */ "wqlist ::= nm eidlist_opt AS LP select RP",
+ /* 272 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP",
+ /* 273 */ "input ::= cmdlist",
+ /* 274 */ "cmdlist ::= cmdlist ecmd",
+ /* 275 */ "cmdlist ::= ecmd",
+ /* 276 */ "ecmd ::= SEMI",
+ /* 277 */ "ecmd ::= explain cmdx SEMI",
+ /* 278 */ "explain ::=",
+ /* 279 */ "trans_opt ::=",
+ /* 280 */ "trans_opt ::= TRANSACTION",
+ /* 281 */ "trans_opt ::= TRANSACTION nm",
+ /* 282 */ "savepoint_opt ::= SAVEPOINT",
+ /* 283 */ "savepoint_opt ::=",
+ /* 284 */ "cmd ::= create_table create_table_args",
+ /* 285 */ "columnlist ::= columnlist COMMA columnname carglist",
+ /* 286 */ "columnlist ::= columnname carglist",
+ /* 287 */ "nm ::= ID|INDEXED",
+ /* 288 */ "nm ::= STRING",
+ /* 289 */ "nm ::= JOIN_KW",
+ /* 290 */ "typetoken ::= typename",
+ /* 291 */ "typename ::= ID|STRING",
+ /* 292 */ "signed ::= plus_num",
+ /* 293 */ "signed ::= minus_num",
+ /* 294 */ "carglist ::= carglist ccons",
+ /* 295 */ "carglist ::=",
+ /* 296 */ "ccons ::= NULL onconf",
+ /* 297 */ "conslist_opt ::= COMMA conslist",
+ /* 298 */ "conslist ::= conslist tconscomma tcons",
+ /* 299 */ "conslist ::= tcons",
+ /* 300 */ "tconscomma ::=",
+ /* 301 */ "defer_subclause_opt ::= defer_subclause",
+ /* 302 */ "resolvetype ::= raisetype",
+ /* 303 */ "selectnowith ::= oneselect",
+ /* 304 */ "oneselect ::= values",
+ /* 305 */ "sclp ::= selcollist COMMA",
+ /* 306 */ "as ::= ID|STRING",
+ /* 307 */ "expr ::= term",
+ /* 308 */ "likeop ::= LIKE_KW|MATCH",
+ /* 309 */ "exprlist ::= nexprlist",
+ /* 310 */ "nmnum ::= plus_num",
+ /* 311 */ "nmnum ::= nm",
+ /* 312 */ "nmnum ::= ON",
+ /* 313 */ "nmnum ::= DELETE",
+ /* 314 */ "nmnum ::= DEFAULT",
+ /* 315 */ "plus_num ::= INTEGER|FLOAT",
+ /* 316 */ "foreach_clause ::=",
+ /* 317 */ "foreach_clause ::= FOR EACH ROW",
+ /* 318 */ "trnm ::= nm",
+ /* 319 */ "tridxby ::=",
+ /* 320 */ "database_kw_opt ::= DATABASE",
+ /* 321 */ "database_kw_opt ::=",
+ /* 322 */ "kwcolumn_opt ::=",
+ /* 323 */ "kwcolumn_opt ::= COLUMNKW",
+ /* 324 */ "vtabarglist ::= vtabarg",
+ /* 325 */ "vtabarglist ::= vtabarglist COMMA vtabarg",
+ /* 326 */ "vtabarg ::= vtabarg vtabargtoken",
+ /* 327 */ "anylist ::=",
+ /* 328 */ "anylist ::= anylist LP anylist RP",
+ /* 329 */ "anylist ::= anylist ANY",
};
#endif /* NDEBUG */
#if YYSTACKDEPTH<=0
/*
-** Try to increase the size of the parser stack.
+** Try to increase the size of the parser stack. Return the number
+** of errors. Return 0 on success.
*/
-static void yyGrowStack(yyParser *p){
+static int yyGrowStack(yyParser *p){
int newSize;
+ int idx;
yyStackEntry *pNew;
newSize = p->yystksz*2 + 100;
- pNew = realloc(p->yystack, newSize*sizeof(pNew[0]));
+ idx = p->yytos ? (int)(p->yytos - p->yystack) : 0;
+ if( p->yystack==&p->yystk0 ){
+ pNew = malloc(newSize*sizeof(pNew[0]));
+ if( pNew ) pNew[0] = p->yystk0;
+ }else{
+ pNew = realloc(p->yystack, newSize*sizeof(pNew[0]));
+ }
if( pNew ){
p->yystack = pNew;
- p->yystksz = newSize;
+ p->yytos = &p->yystack[idx];
#ifndef NDEBUG
if( yyTraceFILE ){
- fprintf(yyTraceFILE,"%sStack grows to %d entries!\n",
- yyTracePrompt, p->yystksz);
+ fprintf(yyTraceFILE,"%sStack grows from %d to %d entries.\n",
+ yyTracePrompt, p->yystksz, newSize);
}
#endif
+ p->yystksz = newSize;
}
+ return pNew==0;
}
#endif
+/* Datatype of the argument to the memory allocated passed as the
+** second argument to sqlite3ParserAlloc() below. This can be changed by
+** putting an appropriate #define in the %include section of the input
+** grammar.
+*/
+#ifndef YYMALLOCARGTYPE
+# define YYMALLOCARGTYPE size_t
+#endif
+
+/* Initialize a new parser that has already been allocated.
+*/
+SQLITE_PRIVATE void sqlite3ParserInit(void *yypParser){
+ yyParser *pParser = (yyParser*)yypParser;
+#ifdef YYTRACKMAXSTACKDEPTH
+ pParser->yyhwm = 0;
+#endif
+#if YYSTACKDEPTH<=0
+ pParser->yytos = NULL;
+ pParser->yystack = NULL;
+ pParser->yystksz = 0;
+ if( yyGrowStack(pParser) ){
+ pParser->yystack = &pParser->yystk0;
+ pParser->yystksz = 1;
+ }
+#endif
+#ifndef YYNOERRORRECOVERY
+ pParser->yyerrcnt = -1;
+#endif
+ pParser->yytos = pParser->yystack;
+ pParser->yystack[0].stateno = 0;
+ pParser->yystack[0].major = 0;
+#if YYSTACKDEPTH>0
+ pParser->yystackEnd = &pParser->yystack[YYSTACKDEPTH-1];
+#endif
+}
+
+#ifndef sqlite3Parser_ENGINEALWAYSONSTACK
/*
** This function allocates a new parser.
** The only argument is a pointer to a function which works like
** A pointer to a parser. This pointer is used in subsequent calls
** to sqlite3Parser and sqlite3ParserFree.
*/
-SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(u64)){
+SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(YYMALLOCARGTYPE)){
yyParser *pParser;
- pParser = (yyParser*)(*mallocProc)( (u64)sizeof(yyParser) );
- if( pParser ){
- pParser->yyidx = -1;
-#ifdef YYTRACKMAXSTACKDEPTH
- pParser->yyidxMax = 0;
-#endif
-#if YYSTACKDEPTH<=0
- pParser->yystack = NULL;
- pParser->yystksz = 0;
- yyGrowStack(pParser);
-#endif
- }
+ pParser = (yyParser*)(*mallocProc)( (YYMALLOCARGTYPE)sizeof(yyParser) );
+ if( pParser ) sqlite3ParserInit(pParser);
return pParser;
}
+#endif /* sqlite3Parser_ENGINEALWAYSONSTACK */
-/* The following function deletes the value associated with a
-** symbol. The symbol can be either a terminal or nonterminal.
-** "yymajor" is the symbol code, and "yypminor" is a pointer to
-** the value.
+
+/* The following function deletes the "minor type" or semantic value
+** associated with a symbol. The symbol can be either a terminal
+** or nonterminal. "yymajor" is the symbol code, and "yypminor" is
+** a pointer to the value to be deleted. The code used to do the
+** deletions is derived from the %destructor and/or %token_destructor
+** directives of the input grammar.
*/
static void yy_destructor(
yyParser *yypParser, /* The parser */
** being destroyed before it is finished parsing.
**
** Note: during a reduce, the only symbols destroyed are those
- ** which appear on the RHS of the rule, but which are not used
+ ** which appear on the RHS of the rule, but which are *not* used
** inside the C code.
*/
+/********* Begin destructor definitions ***************************************/
case 163: /* select */
- case 196: /* selectnowith */
- case 197: /* oneselect */
- case 208: /* values */
-{
-sqlite3SelectDelete(pParse->db, (yypminor->yy3));
-}
- break;
- case 174: /* term */
- case 175: /* expr */
+ case 195: /* selectnowith */
+ case 196: /* oneselect */
+ case 207: /* values */
{
-sqlite3ExprDelete(pParse->db, (yypminor->yy346).pExpr);
+sqlite3SelectDelete(pParse->db, (yypminor->yy387));
}
break;
- case 179: /* eidlist_opt */
- case 188: /* sortlist */
- case 189: /* eidlist */
- case 201: /* selcollist */
- case 204: /* groupby_opt */
- case 206: /* orderby_opt */
- case 209: /* nexprlist */
- case 210: /* exprlist */
- case 211: /* sclp */
- case 221: /* setlist */
- case 228: /* case_exprlist */
+ case 173: /* term */
+ case 174: /* expr */
+ case 202: /* where_opt */
+ case 204: /* having_opt */
+ case 216: /* on_opt */
+ case 226: /* case_operand */
+ case 228: /* case_else */
+ case 237: /* when_clause */
+ case 242: /* key_opt */
{
-sqlite3ExprListDelete(pParse->db, (yypminor->yy14));
+sqlite3ExprDelete(pParse->db, (yypminor->yy314));
}
break;
- case 195: /* fullname */
- case 202: /* from */
- case 213: /* seltablist */
- case 214: /* stl_prefix */
+ case 178: /* eidlist_opt */
+ case 187: /* sortlist */
+ case 188: /* eidlist */
+ case 200: /* selcollist */
+ case 203: /* groupby_opt */
+ case 205: /* orderby_opt */
+ case 208: /* nexprlist */
+ case 209: /* exprlist */
+ case 210: /* sclp */
+ case 219: /* setlist */
+ case 225: /* paren_exprlist */
+ case 227: /* case_exprlist */
{
-sqlite3SrcListDelete(pParse->db, (yypminor->yy65));
+sqlite3ExprListDelete(pParse->db, (yypminor->yy322));
}
break;
- case 198: /* with */
- case 252: /* wqlist */
+ case 194: /* fullname */
+ case 201: /* from */
+ case 212: /* seltablist */
+ case 213: /* stl_prefix */
{
-sqlite3WithDelete(pParse->db, (yypminor->yy59));
+sqlite3SrcListDelete(pParse->db, (yypminor->yy259));
}
break;
- case 203: /* where_opt */
- case 205: /* having_opt */
- case 217: /* on_opt */
- case 227: /* case_operand */
- case 229: /* case_else */
- case 238: /* when_clause */
- case 243: /* key_opt */
+ case 197: /* with */
+ case 251: /* wqlist */
{
-sqlite3ExprDelete(pParse->db, (yypminor->yy132));
+sqlite3WithDelete(pParse->db, (yypminor->yy451));
}
break;
- case 218: /* using_opt */
- case 220: /* idlist */
- case 223: /* idlist_opt */
+ case 217: /* using_opt */
+ case 218: /* idlist */
+ case 221: /* idlist_opt */
{
-sqlite3IdListDelete(pParse->db, (yypminor->yy408));
+sqlite3IdListDelete(pParse->db, (yypminor->yy384));
}
break;
- case 234: /* trigger_cmd_list */
- case 239: /* trigger_cmd */
+ case 233: /* trigger_cmd_list */
+ case 238: /* trigger_cmd */
{
-sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy473));
+sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy203));
}
break;
- case 236: /* trigger_event */
+ case 235: /* trigger_event */
{
-sqlite3IdListDelete(pParse->db, (yypminor->yy378).b);
+sqlite3IdListDelete(pParse->db, (yypminor->yy90).b);
}
break;
+/********* End destructor definitions *****************************************/
default: break; /* If no destructor action specified: do nothing */
}
}
**
** If there is a destructor routine associated with the token which
** is popped from the stack, then call it.
-**
-** Return the major token number for the symbol popped.
*/
-static int yy_pop_parser_stack(yyParser *pParser){
- YYCODETYPE yymajor;
- yyStackEntry *yytos = &pParser->yystack[pParser->yyidx];
-
- /* There is no mechanism by which the parser stack can be popped below
- ** empty in SQLite. */
- assert( pParser->yyidx>=0 );
+static void yy_pop_parser_stack(yyParser *pParser){
+ yyStackEntry *yytos;
+ assert( pParser->yytos!=0 );
+ assert( pParser->yytos > pParser->yystack );
+ yytos = pParser->yytos--;
#ifndef NDEBUG
- if( yyTraceFILE && pParser->yyidx>=0 ){
+ if( yyTraceFILE ){
fprintf(yyTraceFILE,"%sPopping %s\n",
yyTracePrompt,
yyTokenName[yytos->major]);
}
#endif
- yymajor = yytos->major;
- yy_destructor(pParser, yymajor, &yytos->minor);
- pParser->yyidx--;
- return yymajor;
+ yy_destructor(pParser, yytos->major, &yytos->minor);
}
+/*
+** Clear all secondary memory allocations from the parser
+*/
+SQLITE_PRIVATE void sqlite3ParserFinalize(void *p){
+ yyParser *pParser = (yyParser*)p;
+ while( pParser->yytos>pParser->yystack ) yy_pop_parser_stack(pParser);
+#if YYSTACKDEPTH<=0
+ if( pParser->yystack!=&pParser->yystk0 ) free(pParser->yystack);
+#endif
+}
+
+#ifndef sqlite3Parser_ENGINEALWAYSONSTACK
/*
-** Deallocate and destroy a parser. Destructors are all called for
+** Deallocate and destroy a parser. Destructors are called for
** all stack elements before shutting the parser down.
**
-** Inputs:
-** <ul>
-** <li> A pointer to the parser. This should be a pointer
-** obtained from sqlite3ParserAlloc.
-** <li> A pointer to a function used to reclaim memory obtained
-** from malloc.
-** </ul>
+** If the YYPARSEFREENEVERNULL macro exists (for example because it
+** is defined in a %include section of the input grammar) then it is
+** assumed that the input pointer is never NULL.
*/
SQLITE_PRIVATE void sqlite3ParserFree(
void *p, /* The parser to be deleted */
void (*freeProc)(void*) /* Function used to reclaim memory */
){
- yyParser *pParser = (yyParser*)p;
- /* In SQLite, we never try to destroy a parser that was not successfully
- ** created in the first place. */
- if( NEVER(pParser==0) ) return;
- while( pParser->yyidx>=0 ) yy_pop_parser_stack(pParser);
-#if YYSTACKDEPTH<=0
- free(pParser->yystack);
+#ifndef YYPARSEFREENEVERNULL
+ if( p==0 ) return;
#endif
- (*freeProc)((void*)pParser);
+ sqlite3ParserFinalize(p);
+ (*freeProc)(p);
}
+#endif /* sqlite3Parser_ENGINEALWAYSONSTACK */
/*
** Return the peak depth of the stack for a parser.
#ifdef YYTRACKMAXSTACKDEPTH
SQLITE_PRIVATE int sqlite3ParserStackPeak(void *p){
yyParser *pParser = (yyParser*)p;
- return pParser->yyidxMax;
+ return pParser->yyhwm;
+}
+#endif
+
+/* This array of booleans keeps track of the parser statement
+** coverage. The element yycoverage[X][Y] is set when the parser
+** is in state X and has a lookahead token Y. In a well-tested
+** systems, every element of this matrix should end up being set.
+*/
+#if defined(YYCOVERAGE)
+static unsigned char yycoverage[YYNSTATE][YYNTOKEN];
+#endif
+
+/*
+** Write into out a description of every state/lookahead combination that
+**
+** (1) has not been used by the parser, and
+** (2) is not a syntax error.
+**
+** Return the number of missed state/lookahead combinations.
+*/
+#if defined(YYCOVERAGE)
+SQLITE_PRIVATE int sqlite3ParserCoverage(FILE *out){
+ int stateno, iLookAhead, i;
+ int nMissed = 0;
+ for(stateno=0; stateno<YYNSTATE; stateno++){
+ i = yy_shift_ofst[stateno];
+ for(iLookAhead=0; iLookAhead<YYNTOKEN; iLookAhead++){
+ if( yy_lookahead[i+iLookAhead]!=iLookAhead ) continue;
+ if( yycoverage[stateno][iLookAhead]==0 ) nMissed++;
+ if( out ){
+ fprintf(out,"State %d lookahead %s %s\n", stateno,
+ yyTokenName[iLookAhead],
+ yycoverage[stateno][iLookAhead] ? "ok" : "missed");
+ }
+ }
+ }
+ return nMissed;
}
#endif
/*
** Find the appropriate action for a parser given the terminal
** look-ahead token iLookAhead.
-**
-** If the look-ahead token is YYNOCODE, then check to see if the action is
-** independent of the look-ahead. If it is, return the action, otherwise
-** return YY_NO_ACTION.
*/
-static int yy_find_shift_action(
+static unsigned int yy_find_shift_action(
yyParser *pParser, /* The parser */
YYCODETYPE iLookAhead /* The look-ahead token */
){
int i;
- int stateno = pParser->yystack[pParser->yyidx].stateno;
+ int stateno = pParser->yytos->stateno;
- if( stateno>=YY_MIN_REDUCE ) return stateno;
+ if( stateno>YY_MAX_SHIFT ) return stateno;
assert( stateno <= YY_SHIFT_COUNT );
- i = yy_shift_ofst[stateno];
- if( i==YY_SHIFT_USE_DFLT ) return yy_default[stateno];
- assert( iLookAhead!=YYNOCODE );
- i += iLookAhead;
- if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){
- if( iLookAhead>0 ){
+#if defined(YYCOVERAGE)
+ yycoverage[stateno][iLookAhead] = 1;
+#endif
+ do{
+ i = yy_shift_ofst[stateno];
+ assert( i>=0 );
+ assert( i+YYNTOKEN<=(int)sizeof(yy_lookahead)/sizeof(yy_lookahead[0]) );
+ assert( iLookAhead!=YYNOCODE );
+ assert( iLookAhead < YYNTOKEN );
+ i += iLookAhead;
+ if( yy_lookahead[i]!=iLookAhead ){
#ifdef YYFALLBACK
YYCODETYPE iFallback; /* Fallback token */
if( iLookAhead<sizeof(yyFallback)/sizeof(yyFallback[0])
yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]);
}
#endif
- return yy_find_shift_action(pParser, iFallback);
+ assert( yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
+ iLookAhead = iFallback;
+ continue;
}
#endif
#ifdef YYWILDCARD
#if YY_SHIFT_MAX+YYWILDCARD>=YY_ACTTAB_COUNT
j<YY_ACTTAB_COUNT &&
#endif
- yy_lookahead[j]==YYWILDCARD
+ yy_lookahead[j]==YYWILDCARD && iLookAhead>0
){
#ifndef NDEBUG
if( yyTraceFILE ){
fprintf(yyTraceFILE, "%sWILDCARD %s => %s\n",
- yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[YYWILDCARD]);
+ yyTracePrompt, yyTokenName[iLookAhead],
+ yyTokenName[YYWILDCARD]);
}
#endif /* NDEBUG */
return yy_action[j];
}
}
#endif /* YYWILDCARD */
+ return yy_default[stateno];
+ }else{
+ return yy_action[i];
}
- return yy_default[stateno];
- }else{
- return yy_action[i];
- }
+ }while(1);
}
/*
** Find the appropriate action for a parser given the non-terminal
** look-ahead token iLookAhead.
-**
-** If the look-ahead token is YYNOCODE, then check to see if the action is
-** independent of the look-ahead. If it is, return the action, otherwise
-** return YY_NO_ACTION.
*/
static int yy_find_reduce_action(
int stateno, /* Current state number */
assert( stateno<=YY_REDUCE_COUNT );
#endif
i = yy_reduce_ofst[stateno];
- assert( i!=YY_REDUCE_USE_DFLT );
assert( iLookAhead!=YYNOCODE );
i += iLookAhead;
#ifdef YYERRORSYMBOL
/*
** The following routine is called if the stack overflows.
*/
-static void yyStackOverflow(yyParser *yypParser, YYMINORTYPE *yypMinor){
+static void yyStackOverflow(yyParser *yypParser){
sqlite3ParserARG_FETCH;
- yypParser->yyidx--;
#ifndef NDEBUG
if( yyTraceFILE ){
fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt);
}
#endif
- while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
+ while( yypParser->yytos>yypParser->yystack ) yy_pop_parser_stack(yypParser);
/* Here code is inserted which will execute if the parser
** stack every overflows */
+/******** Begin %stack_overflow code ******************************************/
- UNUSED_PARAMETER(yypMinor); /* Silence some compiler warnings */
sqlite3ErrorMsg(pParse, "parser stack overflow");
+/******** End %stack_overflow code ********************************************/
sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument var */
}
** Print tracing information for a SHIFT action
*/
#ifndef NDEBUG
-static void yyTraceShift(yyParser *yypParser, int yyNewState){
+static void yyTraceShift(yyParser *yypParser, int yyNewState, const char *zTag){
if( yyTraceFILE ){
- int i;
if( yyNewState<YYNSTATE ){
- fprintf(yyTraceFILE,"%sShift %d\n",yyTracePrompt,yyNewState);
- fprintf(yyTraceFILE,"%sStack:",yyTracePrompt);
- for(i=1; i<=yypParser->yyidx; i++)
- fprintf(yyTraceFILE," %s",yyTokenName[yypParser->yystack[i].major]);
- fprintf(yyTraceFILE,"\n");
+ fprintf(yyTraceFILE,"%s%s '%s', go to state %d\n",
+ yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major],
+ yyNewState);
}else{
- fprintf(yyTraceFILE,"%sShift *\n",yyTracePrompt);
+ fprintf(yyTraceFILE,"%s%s '%s', pending reduce %d\n",
+ yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major],
+ yyNewState - YY_MIN_REDUCE);
}
}
}
#else
-# define yyTraceShift(X,Y)
+# define yyTraceShift(X,Y,Z)
#endif
/*
-** Perform a shift action. Return the number of errors.
+** Perform a shift action.
*/
static void yy_shift(
yyParser *yypParser, /* The parser to be shifted */
int yyNewState, /* The new state to shift in */
int yyMajor, /* The major token to shift in */
- YYMINORTYPE *yypMinor /* Pointer to the minor token to shift in */
+ sqlite3ParserTOKENTYPE yyMinor /* The minor token to shift in */
){
yyStackEntry *yytos;
- yypParser->yyidx++;
+ yypParser->yytos++;
#ifdef YYTRACKMAXSTACKDEPTH
- if( yypParser->yyidx>yypParser->yyidxMax ){
- yypParser->yyidxMax = yypParser->yyidx;
+ if( (int)(yypParser->yytos - yypParser->yystack)>yypParser->yyhwm ){
+ yypParser->yyhwm++;
+ assert( yypParser->yyhwm == (int)(yypParser->yytos - yypParser->yystack) );
}
#endif
#if YYSTACKDEPTH>0
- if( yypParser->yyidx>=YYSTACKDEPTH ){
- yyStackOverflow(yypParser, yypMinor);
+ if( yypParser->yytos>yypParser->yystackEnd ){
+ yypParser->yytos--;
+ yyStackOverflow(yypParser);
return;
}
#else
- if( yypParser->yyidx>=yypParser->yystksz ){
- yyGrowStack(yypParser);
- if( yypParser->yyidx>=yypParser->yystksz ){
- yyStackOverflow(yypParser, yypMinor);
+ if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz] ){
+ if( yyGrowStack(yypParser) ){
+ yypParser->yytos--;
+ yyStackOverflow(yypParser);
return;
}
}
#endif
- yytos = &yypParser->yystack[yypParser->yyidx];
+ if( yyNewState > YY_MAX_SHIFT ){
+ yyNewState += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE;
+ }
+ yytos = yypParser->yytos;
yytos->stateno = (YYACTIONTYPE)yyNewState;
yytos->major = (YYCODETYPE)yyMajor;
- yytos->minor = *yypMinor;
- yyTraceShift(yypParser, yyNewState);
+ yytos->minor.yy0 = yyMinor;
+ yyTraceShift(yypParser, yyNewState, "Shift");
}
/* The following table contains information about every rule that
** is used during the reduce.
*/
static const struct {
- YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */
- unsigned char nrhs; /* Number of right-hand side symbols in the rule */
+ YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */
+ signed char nrhs; /* Negative of the number of RHS symbols in the rule */
} yyRuleInfo[] = {
- { 144, 1 },
- { 145, 2 },
- { 145, 1 },
- { 146, 1 },
- { 146, 3 },
- { 147, 0 },
- { 147, 1 },
- { 147, 3 },
- { 148, 1 },
- { 149, 3 },
- { 151, 0 },
- { 151, 1 },
- { 151, 2 },
- { 150, 0 },
- { 150, 1 },
- { 150, 1 },
- { 150, 1 },
- { 149, 2 },
- { 149, 2 },
- { 149, 2 },
- { 153, 1 },
- { 153, 0 },
- { 149, 2 },
- { 149, 3 },
- { 149, 5 },
- { 149, 2 },
- { 154, 6 },
- { 156, 1 },
- { 158, 0 },
- { 158, 3 },
- { 157, 1 },
- { 157, 0 },
- { 155, 5 },
- { 155, 2 },
- { 162, 0 },
- { 162, 2 },
- { 160, 3 },
- { 160, 1 },
- { 164, 3 },
- { 165, 1 },
- { 152, 1 },
- { 152, 1 },
- { 152, 1 },
- { 166, 0 },
- { 166, 1 },
- { 168, 1 },
- { 168, 4 },
- { 168, 6 },
- { 169, 1 },
- { 169, 2 },
- { 170, 1 },
- { 170, 1 },
- { 167, 2 },
- { 167, 0 },
- { 173, 2 },
- { 173, 2 },
- { 173, 4 },
- { 173, 3 },
- { 173, 3 },
- { 173, 2 },
- { 173, 2 },
- { 173, 3 },
- { 173, 5 },
- { 173, 2 },
- { 173, 4 },
- { 173, 4 },
- { 173, 1 },
- { 173, 2 },
- { 178, 0 },
- { 178, 1 },
- { 180, 0 },
- { 180, 2 },
- { 182, 2 },
- { 182, 3 },
- { 182, 3 },
- { 182, 3 },
- { 183, 2 },
- { 183, 2 },
- { 183, 1 },
- { 183, 1 },
- { 183, 2 },
- { 181, 3 },
- { 181, 2 },
- { 184, 0 },
- { 184, 2 },
- { 184, 2 },
- { 161, 0 },
- { 161, 2 },
- { 185, 3 },
- { 185, 1 },
- { 186, 1 },
- { 186, 0 },
- { 187, 2 },
- { 187, 7 },
- { 187, 5 },
- { 187, 5 },
- { 187, 10 },
- { 190, 0 },
- { 190, 1 },
- { 176, 0 },
- { 176, 3 },
- { 191, 0 },
- { 191, 2 },
- { 192, 1 },
- { 192, 1 },
- { 192, 1 },
- { 149, 4 },
- { 194, 2 },
- { 194, 0 },
- { 149, 9 },
- { 149, 4 },
- { 149, 1 },
- { 163, 2 },
- { 196, 1 },
- { 196, 3 },
- { 199, 1 },
- { 199, 2 },
- { 199, 1 },
- { 197, 9 },
- { 197, 1 },
- { 208, 4 },
- { 208, 5 },
- { 200, 1 },
- { 200, 1 },
- { 200, 0 },
- { 211, 2 },
- { 211, 0 },
- { 201, 3 },
- { 201, 2 },
- { 201, 4 },
- { 212, 2 },
- { 212, 1 },
- { 212, 0 },
- { 202, 0 },
- { 202, 2 },
- { 214, 2 },
- { 214, 0 },
- { 213, 7 },
- { 213, 9 },
- { 213, 7 },
- { 213, 7 },
- { 159, 0 },
- { 159, 2 },
- { 195, 2 },
- { 215, 1 },
- { 215, 2 },
- { 215, 3 },
- { 215, 4 },
- { 217, 2 },
- { 217, 0 },
- { 216, 0 },
- { 216, 3 },
- { 216, 2 },
- { 218, 4 },
- { 218, 0 },
- { 206, 0 },
- { 206, 3 },
- { 188, 4 },
- { 188, 2 },
- { 177, 1 },
- { 177, 1 },
- { 177, 0 },
- { 204, 0 },
- { 204, 3 },
- { 205, 0 },
- { 205, 2 },
- { 207, 0 },
- { 207, 2 },
- { 207, 4 },
- { 207, 4 },
- { 149, 6 },
- { 203, 0 },
- { 203, 2 },
- { 149, 8 },
- { 221, 5 },
- { 221, 3 },
- { 149, 6 },
- { 149, 7 },
- { 222, 2 },
- { 222, 1 },
- { 223, 0 },
- { 223, 3 },
- { 220, 3 },
- { 220, 1 },
- { 175, 1 },
- { 175, 3 },
- { 174, 1 },
- { 175, 1 },
- { 175, 1 },
- { 175, 3 },
- { 175, 5 },
- { 174, 1 },
- { 174, 1 },
- { 175, 1 },
- { 175, 3 },
- { 175, 6 },
- { 175, 5 },
- { 175, 4 },
- { 174, 1 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 175, 3 },
- { 224, 1 },
- { 224, 2 },
- { 175, 3 },
- { 175, 5 },
- { 175, 2 },
- { 175, 3 },
- { 175, 3 },
- { 175, 4 },
- { 175, 2 },
- { 175, 2 },
- { 175, 2 },
- { 175, 2 },
- { 225, 1 },
- { 225, 2 },
- { 175, 5 },
- { 226, 1 },
- { 226, 2 },
- { 175, 5 },
- { 175, 3 },
- { 175, 5 },
- { 175, 4 },
- { 175, 4 },
- { 175, 5 },
- { 228, 5 },
- { 228, 4 },
- { 229, 2 },
- { 229, 0 },
- { 227, 1 },
- { 227, 0 },
- { 210, 1 },
- { 210, 0 },
- { 209, 3 },
- { 209, 1 },
- { 149, 12 },
- { 230, 1 },
- { 230, 0 },
- { 179, 0 },
- { 179, 3 },
- { 189, 5 },
- { 189, 3 },
- { 231, 0 },
- { 231, 2 },
- { 149, 4 },
- { 149, 1 },
- { 149, 2 },
- { 149, 3 },
- { 149, 5 },
- { 149, 6 },
- { 149, 5 },
- { 149, 6 },
- { 232, 1 },
- { 232, 1 },
- { 232, 1 },
- { 232, 1 },
- { 232, 1 },
- { 171, 2 },
- { 171, 1 },
- { 172, 2 },
- { 149, 5 },
- { 233, 11 },
- { 235, 1 },
- { 235, 1 },
- { 235, 2 },
- { 235, 0 },
- { 236, 1 },
- { 236, 1 },
- { 236, 3 },
- { 237, 0 },
- { 237, 3 },
- { 238, 0 },
- { 238, 2 },
- { 234, 3 },
- { 234, 2 },
- { 240, 1 },
- { 240, 3 },
- { 241, 0 },
- { 241, 3 },
- { 241, 2 },
- { 239, 7 },
- { 239, 5 },
- { 239, 5 },
- { 239, 1 },
- { 175, 4 },
- { 175, 6 },
- { 193, 1 },
- { 193, 1 },
- { 193, 1 },
- { 149, 4 },
- { 149, 6 },
- { 149, 3 },
- { 243, 0 },
- { 243, 2 },
- { 242, 1 },
- { 242, 0 },
- { 149, 1 },
- { 149, 3 },
- { 149, 1 },
- { 149, 3 },
- { 149, 6 },
- { 149, 6 },
- { 244, 1 },
- { 245, 0 },
- { 245, 1 },
- { 149, 1 },
- { 149, 4 },
- { 246, 8 },
- { 247, 1 },
- { 247, 3 },
- { 248, 0 },
- { 248, 2 },
- { 249, 1 },
- { 249, 3 },
- { 250, 1 },
- { 251, 0 },
- { 251, 4 },
- { 251, 2 },
- { 198, 0 },
- { 198, 2 },
- { 198, 3 },
- { 252, 6 },
- { 252, 8 },
+ { 147, -1 }, /* (0) explain ::= EXPLAIN */
+ { 147, -3 }, /* (1) explain ::= EXPLAIN QUERY PLAN */
+ { 148, -1 }, /* (2) cmdx ::= cmd */
+ { 149, -3 }, /* (3) cmd ::= BEGIN transtype trans_opt */
+ { 150, 0 }, /* (4) transtype ::= */
+ { 150, -1 }, /* (5) transtype ::= DEFERRED */
+ { 150, -1 }, /* (6) transtype ::= IMMEDIATE */
+ { 150, -1 }, /* (7) transtype ::= EXCLUSIVE */
+ { 149, -2 }, /* (8) cmd ::= COMMIT|END trans_opt */
+ { 149, -2 }, /* (9) cmd ::= ROLLBACK trans_opt */
+ { 149, -2 }, /* (10) cmd ::= SAVEPOINT nm */
+ { 149, -3 }, /* (11) cmd ::= RELEASE savepoint_opt nm */
+ { 149, -5 }, /* (12) cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */
+ { 154, -6 }, /* (13) create_table ::= createkw temp TABLE ifnotexists nm dbnm */
+ { 156, -1 }, /* (14) createkw ::= CREATE */
+ { 158, 0 }, /* (15) ifnotexists ::= */
+ { 158, -3 }, /* (16) ifnotexists ::= IF NOT EXISTS */
+ { 157, -1 }, /* (17) temp ::= TEMP */
+ { 157, 0 }, /* (18) temp ::= */
+ { 155, -5 }, /* (19) create_table_args ::= LP columnlist conslist_opt RP table_options */
+ { 155, -2 }, /* (20) create_table_args ::= AS select */
+ { 162, 0 }, /* (21) table_options ::= */
+ { 162, -2 }, /* (22) table_options ::= WITHOUT nm */
+ { 164, -2 }, /* (23) columnname ::= nm typetoken */
+ { 166, 0 }, /* (24) typetoken ::= */
+ { 166, -4 }, /* (25) typetoken ::= typename LP signed RP */
+ { 166, -6 }, /* (26) typetoken ::= typename LP signed COMMA signed RP */
+ { 167, -2 }, /* (27) typename ::= typename ID|STRING */
+ { 171, 0 }, /* (28) scanpt ::= */
+ { 172, -2 }, /* (29) ccons ::= CONSTRAINT nm */
+ { 172, -4 }, /* (30) ccons ::= DEFAULT scanpt term scanpt */
+ { 172, -4 }, /* (31) ccons ::= DEFAULT LP expr RP */
+ { 172, -4 }, /* (32) ccons ::= DEFAULT PLUS term scanpt */
+ { 172, -4 }, /* (33) ccons ::= DEFAULT MINUS term scanpt */
+ { 172, -3 }, /* (34) ccons ::= DEFAULT scanpt ID|INDEXED */
+ { 172, -3 }, /* (35) ccons ::= NOT NULL onconf */
+ { 172, -5 }, /* (36) ccons ::= PRIMARY KEY sortorder onconf autoinc */
+ { 172, -2 }, /* (37) ccons ::= UNIQUE onconf */
+ { 172, -4 }, /* (38) ccons ::= CHECK LP expr RP */
+ { 172, -4 }, /* (39) ccons ::= REFERENCES nm eidlist_opt refargs */
+ { 172, -1 }, /* (40) ccons ::= defer_subclause */
+ { 172, -2 }, /* (41) ccons ::= COLLATE ID|STRING */
+ { 177, 0 }, /* (42) autoinc ::= */
+ { 177, -1 }, /* (43) autoinc ::= AUTOINCR */
+ { 179, 0 }, /* (44) refargs ::= */
+ { 179, -2 }, /* (45) refargs ::= refargs refarg */
+ { 181, -2 }, /* (46) refarg ::= MATCH nm */
+ { 181, -3 }, /* (47) refarg ::= ON INSERT refact */
+ { 181, -3 }, /* (48) refarg ::= ON DELETE refact */
+ { 181, -3 }, /* (49) refarg ::= ON UPDATE refact */
+ { 182, -2 }, /* (50) refact ::= SET NULL */
+ { 182, -2 }, /* (51) refact ::= SET DEFAULT */
+ { 182, -1 }, /* (52) refact ::= CASCADE */
+ { 182, -1 }, /* (53) refact ::= RESTRICT */
+ { 182, -2 }, /* (54) refact ::= NO ACTION */
+ { 180, -3 }, /* (55) defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */
+ { 180, -2 }, /* (56) defer_subclause ::= DEFERRABLE init_deferred_pred_opt */
+ { 183, 0 }, /* (57) init_deferred_pred_opt ::= */
+ { 183, -2 }, /* (58) init_deferred_pred_opt ::= INITIALLY DEFERRED */
+ { 183, -2 }, /* (59) init_deferred_pred_opt ::= INITIALLY IMMEDIATE */
+ { 161, 0 }, /* (60) conslist_opt ::= */
+ { 185, -1 }, /* (61) tconscomma ::= COMMA */
+ { 186, -2 }, /* (62) tcons ::= CONSTRAINT nm */
+ { 186, -7 }, /* (63) tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */
+ { 186, -5 }, /* (64) tcons ::= UNIQUE LP sortlist RP onconf */
+ { 186, -5 }, /* (65) tcons ::= CHECK LP expr RP onconf */
+ { 186, -10 }, /* (66) tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */
+ { 189, 0 }, /* (67) defer_subclause_opt ::= */
+ { 175, 0 }, /* (68) onconf ::= */
+ { 175, -3 }, /* (69) onconf ::= ON CONFLICT resolvetype */
+ { 190, 0 }, /* (70) orconf ::= */
+ { 190, -2 }, /* (71) orconf ::= OR resolvetype */
+ { 191, -1 }, /* (72) resolvetype ::= IGNORE */
+ { 191, -1 }, /* (73) resolvetype ::= REPLACE */
+ { 149, -4 }, /* (74) cmd ::= DROP TABLE ifexists fullname */
+ { 193, -2 }, /* (75) ifexists ::= IF EXISTS */
+ { 193, 0 }, /* (76) ifexists ::= */
+ { 149, -9 }, /* (77) cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */
+ { 149, -4 }, /* (78) cmd ::= DROP VIEW ifexists fullname */
+ { 149, -1 }, /* (79) cmd ::= select */
+ { 163, -2 }, /* (80) select ::= with selectnowith */
+ { 195, -3 }, /* (81) selectnowith ::= selectnowith multiselect_op oneselect */
+ { 198, -1 }, /* (82) multiselect_op ::= UNION */
+ { 198, -2 }, /* (83) multiselect_op ::= UNION ALL */
+ { 198, -1 }, /* (84) multiselect_op ::= EXCEPT|INTERSECT */
+ { 196, -9 }, /* (85) oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */
+ { 207, -4 }, /* (86) values ::= VALUES LP nexprlist RP */
+ { 207, -5 }, /* (87) values ::= values COMMA LP exprlist RP */
+ { 199, -1 }, /* (88) distinct ::= DISTINCT */
+ { 199, -1 }, /* (89) distinct ::= ALL */
+ { 199, 0 }, /* (90) distinct ::= */
+ { 210, 0 }, /* (91) sclp ::= */
+ { 200, -5 }, /* (92) selcollist ::= sclp scanpt expr scanpt as */
+ { 200, -3 }, /* (93) selcollist ::= sclp scanpt STAR */
+ { 200, -5 }, /* (94) selcollist ::= sclp scanpt nm DOT STAR */
+ { 211, -2 }, /* (95) as ::= AS nm */
+ { 211, 0 }, /* (96) as ::= */
+ { 201, 0 }, /* (97) from ::= */
+ { 201, -2 }, /* (98) from ::= FROM seltablist */
+ { 213, -2 }, /* (99) stl_prefix ::= seltablist joinop */
+ { 213, 0 }, /* (100) stl_prefix ::= */
+ { 212, -7 }, /* (101) seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */
+ { 212, -9 }, /* (102) seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */
+ { 212, -7 }, /* (103) seltablist ::= stl_prefix LP select RP as on_opt using_opt */
+ { 212, -7 }, /* (104) seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */
+ { 159, 0 }, /* (105) dbnm ::= */
+ { 159, -2 }, /* (106) dbnm ::= DOT nm */
+ { 194, -2 }, /* (107) fullname ::= nm dbnm */
+ { 214, -1 }, /* (108) joinop ::= COMMA|JOIN */
+ { 214, -2 }, /* (109) joinop ::= JOIN_KW JOIN */
+ { 214, -3 }, /* (110) joinop ::= JOIN_KW nm JOIN */
+ { 214, -4 }, /* (111) joinop ::= JOIN_KW nm nm JOIN */
+ { 216, -2 }, /* (112) on_opt ::= ON expr */
+ { 216, 0 }, /* (113) on_opt ::= */
+ { 215, 0 }, /* (114) indexed_opt ::= */
+ { 215, -3 }, /* (115) indexed_opt ::= INDEXED BY nm */
+ { 215, -2 }, /* (116) indexed_opt ::= NOT INDEXED */
+ { 217, -4 }, /* (117) using_opt ::= USING LP idlist RP */
+ { 217, 0 }, /* (118) using_opt ::= */
+ { 205, 0 }, /* (119) orderby_opt ::= */
+ { 205, -3 }, /* (120) orderby_opt ::= ORDER BY sortlist */
+ { 187, -4 }, /* (121) sortlist ::= sortlist COMMA expr sortorder */
+ { 187, -2 }, /* (122) sortlist ::= expr sortorder */
+ { 176, -1 }, /* (123) sortorder ::= ASC */
+ { 176, -1 }, /* (124) sortorder ::= DESC */
+ { 176, 0 }, /* (125) sortorder ::= */
+ { 203, 0 }, /* (126) groupby_opt ::= */
+ { 203, -3 }, /* (127) groupby_opt ::= GROUP BY nexprlist */
+ { 204, 0 }, /* (128) having_opt ::= */
+ { 204, -2 }, /* (129) having_opt ::= HAVING expr */
+ { 206, 0 }, /* (130) limit_opt ::= */
+ { 206, -2 }, /* (131) limit_opt ::= LIMIT expr */
+ { 206, -4 }, /* (132) limit_opt ::= LIMIT expr OFFSET expr */
+ { 206, -4 }, /* (133) limit_opt ::= LIMIT expr COMMA expr */
+ { 149, -6 }, /* (134) cmd ::= with DELETE FROM fullname indexed_opt where_opt */
+ { 202, 0 }, /* (135) where_opt ::= */
+ { 202, -2 }, /* (136) where_opt ::= WHERE expr */
+ { 149, -8 }, /* (137) cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt */
+ { 219, -5 }, /* (138) setlist ::= setlist COMMA nm EQ expr */
+ { 219, -7 }, /* (139) setlist ::= setlist COMMA LP idlist RP EQ expr */
+ { 219, -3 }, /* (140) setlist ::= nm EQ expr */
+ { 219, -5 }, /* (141) setlist ::= LP idlist RP EQ expr */
+ { 149, -6 }, /* (142) cmd ::= with insert_cmd INTO fullname idlist_opt select */
+ { 149, -7 }, /* (143) cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */
+ { 220, -2 }, /* (144) insert_cmd ::= INSERT orconf */
+ { 220, -1 }, /* (145) insert_cmd ::= REPLACE */
+ { 221, 0 }, /* (146) idlist_opt ::= */
+ { 221, -3 }, /* (147) idlist_opt ::= LP idlist RP */
+ { 218, -3 }, /* (148) idlist ::= idlist COMMA nm */
+ { 218, -1 }, /* (149) idlist ::= nm */
+ { 174, -3 }, /* (150) expr ::= LP expr RP */
+ { 174, -1 }, /* (151) expr ::= ID|INDEXED */
+ { 174, -1 }, /* (152) expr ::= JOIN_KW */
+ { 174, -3 }, /* (153) expr ::= nm DOT nm */
+ { 174, -5 }, /* (154) expr ::= nm DOT nm DOT nm */
+ { 173, -1 }, /* (155) term ::= NULL|FLOAT|BLOB */
+ { 173, -1 }, /* (156) term ::= STRING */
+ { 173, -1 }, /* (157) term ::= INTEGER */
+ { 174, -1 }, /* (158) expr ::= VARIABLE */
+ { 174, -3 }, /* (159) expr ::= expr COLLATE ID|STRING */
+ { 174, -6 }, /* (160) expr ::= CAST LP expr AS typetoken RP */
+ { 174, -5 }, /* (161) expr ::= ID|INDEXED LP distinct exprlist RP */
+ { 174, -4 }, /* (162) expr ::= ID|INDEXED LP STAR RP */
+ { 173, -1 }, /* (163) term ::= CTIME_KW */
+ { 174, -5 }, /* (164) expr ::= LP nexprlist COMMA expr RP */
+ { 174, -3 }, /* (165) expr ::= expr AND expr */
+ { 174, -3 }, /* (166) expr ::= expr OR expr */
+ { 174, -3 }, /* (167) expr ::= expr LT|GT|GE|LE expr */
+ { 174, -3 }, /* (168) expr ::= expr EQ|NE expr */
+ { 174, -3 }, /* (169) expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */
+ { 174, -3 }, /* (170) expr ::= expr PLUS|MINUS expr */
+ { 174, -3 }, /* (171) expr ::= expr STAR|SLASH|REM expr */
+ { 174, -3 }, /* (172) expr ::= expr CONCAT expr */
+ { 222, -2 }, /* (173) likeop ::= NOT LIKE_KW|MATCH */
+ { 174, -3 }, /* (174) expr ::= expr likeop expr */
+ { 174, -5 }, /* (175) expr ::= expr likeop expr ESCAPE expr */
+ { 174, -2 }, /* (176) expr ::= expr ISNULL|NOTNULL */
+ { 174, -3 }, /* (177) expr ::= expr NOT NULL */
+ { 174, -3 }, /* (178) expr ::= expr IS expr */
+ { 174, -4 }, /* (179) expr ::= expr IS NOT expr */
+ { 174, -2 }, /* (180) expr ::= NOT expr */
+ { 174, -2 }, /* (181) expr ::= BITNOT expr */
+ { 174, -2 }, /* (182) expr ::= MINUS expr */
+ { 174, -2 }, /* (183) expr ::= PLUS expr */
+ { 223, -1 }, /* (184) between_op ::= BETWEEN */
+ { 223, -2 }, /* (185) between_op ::= NOT BETWEEN */
+ { 174, -5 }, /* (186) expr ::= expr between_op expr AND expr */
+ { 224, -1 }, /* (187) in_op ::= IN */
+ { 224, -2 }, /* (188) in_op ::= NOT IN */
+ { 174, -5 }, /* (189) expr ::= expr in_op LP exprlist RP */
+ { 174, -3 }, /* (190) expr ::= LP select RP */
+ { 174, -5 }, /* (191) expr ::= expr in_op LP select RP */
+ { 174, -5 }, /* (192) expr ::= expr in_op nm dbnm paren_exprlist */
+ { 174, -4 }, /* (193) expr ::= EXISTS LP select RP */
+ { 174, -5 }, /* (194) expr ::= CASE case_operand case_exprlist case_else END */
+ { 227, -5 }, /* (195) case_exprlist ::= case_exprlist WHEN expr THEN expr */
+ { 227, -4 }, /* (196) case_exprlist ::= WHEN expr THEN expr */
+ { 228, -2 }, /* (197) case_else ::= ELSE expr */
+ { 228, 0 }, /* (198) case_else ::= */
+ { 226, -1 }, /* (199) case_operand ::= expr */
+ { 226, 0 }, /* (200) case_operand ::= */
+ { 209, 0 }, /* (201) exprlist ::= */
+ { 208, -3 }, /* (202) nexprlist ::= nexprlist COMMA expr */
+ { 208, -1 }, /* (203) nexprlist ::= expr */
+ { 225, 0 }, /* (204) paren_exprlist ::= */
+ { 225, -3 }, /* (205) paren_exprlist ::= LP exprlist RP */
+ { 149, -12 }, /* (206) cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */
+ { 229, -1 }, /* (207) uniqueflag ::= UNIQUE */
+ { 229, 0 }, /* (208) uniqueflag ::= */
+ { 178, 0 }, /* (209) eidlist_opt ::= */
+ { 178, -3 }, /* (210) eidlist_opt ::= LP eidlist RP */
+ { 188, -5 }, /* (211) eidlist ::= eidlist COMMA nm collate sortorder */
+ { 188, -3 }, /* (212) eidlist ::= nm collate sortorder */
+ { 230, 0 }, /* (213) collate ::= */
+ { 230, -2 }, /* (214) collate ::= COLLATE ID|STRING */
+ { 149, -4 }, /* (215) cmd ::= DROP INDEX ifexists fullname */
+ { 149, -1 }, /* (216) cmd ::= VACUUM */
+ { 149, -2 }, /* (217) cmd ::= VACUUM nm */
+ { 149, -3 }, /* (218) cmd ::= PRAGMA nm dbnm */
+ { 149, -5 }, /* (219) cmd ::= PRAGMA nm dbnm EQ nmnum */
+ { 149, -6 }, /* (220) cmd ::= PRAGMA nm dbnm LP nmnum RP */
+ { 149, -5 }, /* (221) cmd ::= PRAGMA nm dbnm EQ minus_num */
+ { 149, -6 }, /* (222) cmd ::= PRAGMA nm dbnm LP minus_num RP */
+ { 169, -2 }, /* (223) plus_num ::= PLUS INTEGER|FLOAT */
+ { 170, -2 }, /* (224) minus_num ::= MINUS INTEGER|FLOAT */
+ { 149, -5 }, /* (225) cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */
+ { 232, -11 }, /* (226) trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */
+ { 234, -1 }, /* (227) trigger_time ::= BEFORE|AFTER */
+ { 234, -2 }, /* (228) trigger_time ::= INSTEAD OF */
+ { 234, 0 }, /* (229) trigger_time ::= */
+ { 235, -1 }, /* (230) trigger_event ::= DELETE|INSERT */
+ { 235, -1 }, /* (231) trigger_event ::= UPDATE */
+ { 235, -3 }, /* (232) trigger_event ::= UPDATE OF idlist */
+ { 237, 0 }, /* (233) when_clause ::= */
+ { 237, -2 }, /* (234) when_clause ::= WHEN expr */
+ { 233, -3 }, /* (235) trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */
+ { 233, -2 }, /* (236) trigger_cmd_list ::= trigger_cmd SEMI */
+ { 239, -3 }, /* (237) trnm ::= nm DOT nm */
+ { 240, -3 }, /* (238) tridxby ::= INDEXED BY nm */
+ { 240, -2 }, /* (239) tridxby ::= NOT INDEXED */
+ { 238, -8 }, /* (240) trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */
+ { 238, -7 }, /* (241) trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select scanpt */
+ { 238, -6 }, /* (242) trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */
+ { 238, -3 }, /* (243) trigger_cmd ::= scanpt select scanpt */
+ { 174, -4 }, /* (244) expr ::= RAISE LP IGNORE RP */
+ { 174, -6 }, /* (245) expr ::= RAISE LP raisetype COMMA nm RP */
+ { 192, -1 }, /* (246) raisetype ::= ROLLBACK */
+ { 192, -1 }, /* (247) raisetype ::= ABORT */
+ { 192, -1 }, /* (248) raisetype ::= FAIL */
+ { 149, -4 }, /* (249) cmd ::= DROP TRIGGER ifexists fullname */
+ { 149, -6 }, /* (250) cmd ::= ATTACH database_kw_opt expr AS expr key_opt */
+ { 149, -3 }, /* (251) cmd ::= DETACH database_kw_opt expr */
+ { 242, 0 }, /* (252) key_opt ::= */
+ { 242, -2 }, /* (253) key_opt ::= KEY expr */
+ { 149, -1 }, /* (254) cmd ::= REINDEX */
+ { 149, -3 }, /* (255) cmd ::= REINDEX nm dbnm */
+ { 149, -1 }, /* (256) cmd ::= ANALYZE */
+ { 149, -3 }, /* (257) cmd ::= ANALYZE nm dbnm */
+ { 149, -6 }, /* (258) cmd ::= ALTER TABLE fullname RENAME TO nm */
+ { 149, -7 }, /* (259) cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */
+ { 243, -1 }, /* (260) add_column_fullname ::= fullname */
+ { 149, -1 }, /* (261) cmd ::= create_vtab */
+ { 149, -4 }, /* (262) cmd ::= create_vtab LP vtabarglist RP */
+ { 245, -8 }, /* (263) create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */
+ { 247, 0 }, /* (264) vtabarg ::= */
+ { 248, -1 }, /* (265) vtabargtoken ::= ANY */
+ { 248, -3 }, /* (266) vtabargtoken ::= lp anylist RP */
+ { 249, -1 }, /* (267) lp ::= LP */
+ { 197, 0 }, /* (268) with ::= */
+ { 197, -2 }, /* (269) with ::= WITH wqlist */
+ { 197, -3 }, /* (270) with ::= WITH RECURSIVE wqlist */
+ { 251, -6 }, /* (271) wqlist ::= nm eidlist_opt AS LP select RP */
+ { 251, -8 }, /* (272) wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */
+ { 144, -1 }, /* (273) input ::= cmdlist */
+ { 145, -2 }, /* (274) cmdlist ::= cmdlist ecmd */
+ { 145, -1 }, /* (275) cmdlist ::= ecmd */
+ { 146, -1 }, /* (276) ecmd ::= SEMI */
+ { 146, -3 }, /* (277) ecmd ::= explain cmdx SEMI */
+ { 147, 0 }, /* (278) explain ::= */
+ { 151, 0 }, /* (279) trans_opt ::= */
+ { 151, -1 }, /* (280) trans_opt ::= TRANSACTION */
+ { 151, -2 }, /* (281) trans_opt ::= TRANSACTION nm */
+ { 153, -1 }, /* (282) savepoint_opt ::= SAVEPOINT */
+ { 153, 0 }, /* (283) savepoint_opt ::= */
+ { 149, -2 }, /* (284) cmd ::= create_table create_table_args */
+ { 160, -4 }, /* (285) columnlist ::= columnlist COMMA columnname carglist */
+ { 160, -2 }, /* (286) columnlist ::= columnname carglist */
+ { 152, -1 }, /* (287) nm ::= ID|INDEXED */
+ { 152, -1 }, /* (288) nm ::= STRING */
+ { 152, -1 }, /* (289) nm ::= JOIN_KW */
+ { 166, -1 }, /* (290) typetoken ::= typename */
+ { 167, -1 }, /* (291) typename ::= ID|STRING */
+ { 168, -1 }, /* (292) signed ::= plus_num */
+ { 168, -1 }, /* (293) signed ::= minus_num */
+ { 165, -2 }, /* (294) carglist ::= carglist ccons */
+ { 165, 0 }, /* (295) carglist ::= */
+ { 172, -2 }, /* (296) ccons ::= NULL onconf */
+ { 161, -2 }, /* (297) conslist_opt ::= COMMA conslist */
+ { 184, -3 }, /* (298) conslist ::= conslist tconscomma tcons */
+ { 184, -1 }, /* (299) conslist ::= tcons */
+ { 185, 0 }, /* (300) tconscomma ::= */
+ { 189, -1 }, /* (301) defer_subclause_opt ::= defer_subclause */
+ { 191, -1 }, /* (302) resolvetype ::= raisetype */
+ { 195, -1 }, /* (303) selectnowith ::= oneselect */
+ { 196, -1 }, /* (304) oneselect ::= values */
+ { 210, -2 }, /* (305) sclp ::= selcollist COMMA */
+ { 211, -1 }, /* (306) as ::= ID|STRING */
+ { 174, -1 }, /* (307) expr ::= term */
+ { 222, -1 }, /* (308) likeop ::= LIKE_KW|MATCH */
+ { 209, -1 }, /* (309) exprlist ::= nexprlist */
+ { 231, -1 }, /* (310) nmnum ::= plus_num */
+ { 231, -1 }, /* (311) nmnum ::= nm */
+ { 231, -1 }, /* (312) nmnum ::= ON */
+ { 231, -1 }, /* (313) nmnum ::= DELETE */
+ { 231, -1 }, /* (314) nmnum ::= DEFAULT */
+ { 169, -1 }, /* (315) plus_num ::= INTEGER|FLOAT */
+ { 236, 0 }, /* (316) foreach_clause ::= */
+ { 236, -3 }, /* (317) foreach_clause ::= FOR EACH ROW */
+ { 239, -1 }, /* (318) trnm ::= nm */
+ { 240, 0 }, /* (319) tridxby ::= */
+ { 241, -1 }, /* (320) database_kw_opt ::= DATABASE */
+ { 241, 0 }, /* (321) database_kw_opt ::= */
+ { 244, 0 }, /* (322) kwcolumn_opt ::= */
+ { 244, -1 }, /* (323) kwcolumn_opt ::= COLUMNKW */
+ { 246, -1 }, /* (324) vtabarglist ::= vtabarg */
+ { 246, -3 }, /* (325) vtabarglist ::= vtabarglist COMMA vtabarg */
+ { 247, -2 }, /* (326) vtabarg ::= vtabarg vtabargtoken */
+ { 250, 0 }, /* (327) anylist ::= */
+ { 250, -4 }, /* (328) anylist ::= anylist LP anylist RP */
+ { 250, -2 }, /* (329) anylist ::= anylist ANY */
};
static void yy_accept(yyParser*); /* Forward Declaration */
/*
** Perform a reduce action and the shift that must immediately
** follow the reduce.
+**
+** The yyLookahead and yyLookaheadToken parameters provide reduce actions
+** access to the lookahead token (if any). The yyLookahead will be YYNOCODE
+** if the lookahead token has already been consumed. As this procedure is
+** only called from one place, optimizing compilers will in-line it, which
+** means that the extra parameters have no performance impact.
*/
static void yy_reduce(
yyParser *yypParser, /* The parser */
- int yyruleno /* Number of the rule by which to reduce */
+ unsigned int yyruleno, /* Number of the rule by which to reduce */
+ int yyLookahead, /* Lookahead token, or YYNOCODE if none */
+ sqlite3ParserTOKENTYPE yyLookaheadToken /* Value of the lookahead token */
){
int yygoto; /* The next state */
int yyact; /* The next action */
- YYMINORTYPE yygotominor; /* The LHS of the rule reduced */
yyStackEntry *yymsp; /* The top of the parser's stack */
int yysize; /* Amount to pop the stack */
sqlite3ParserARG_FETCH;
- yymsp = &yypParser->yystack[yypParser->yyidx];
+ (void)yyLookahead;
+ (void)yyLookaheadToken;
+ yymsp = yypParser->yytos;
#ifndef NDEBUG
- if( yyTraceFILE && yyruleno>=0
- && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){
+ if( yyTraceFILE && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){
yysize = yyRuleInfo[yyruleno].nrhs;
- fprintf(yyTraceFILE, "%sReduce [%s] -> state %d.\n", yyTracePrompt,
- yyRuleName[yyruleno], yymsp[-yysize].stateno);
+ if( yysize ){
+ fprintf(yyTraceFILE, "%sReduce %d [%s], go to state %d.\n",
+ yyTracePrompt,
+ yyruleno, yyRuleName[yyruleno], yymsp[yysize].stateno);
+ }else{
+ fprintf(yyTraceFILE, "%sReduce %d [%s].\n",
+ yyTracePrompt, yyruleno, yyRuleName[yyruleno]);
+ }
}
#endif /* NDEBUG */
- /* Silence complaints from purify about yygotominor being uninitialized
- ** in some cases when it is copied into the stack after the following
- ** switch. yygotominor is uninitialized when a rule reduces that does
- ** not set the value of its left-hand side nonterminal. Leaving the
- ** value of the nonterminal uninitialized is utterly harmless as long
- ** as the value is never used. So really the only thing this code
- ** accomplishes is to quieten purify.
- **
- ** 2007-01-16: The wireshark project (www.wireshark.org) reports that
- ** without this code, their parser segfaults. I'm not sure what there
- ** parser is doing to make this happen. This is the second bug report
- ** from wireshark this week. Clearly they are stressing Lemon in ways
- ** that it has not been previously stressed... (SQLite ticket #2172)
- */
- /*memset(&yygotominor, 0, sizeof(yygotominor));*/
- yygotominor = yyzerominor;
-
+ /* Check that the stack is large enough to grow by a single entry
+ ** if the RHS of the rule is empty. This ensures that there is room
+ ** enough on the stack to push the LHS value */
+ if( yyRuleInfo[yyruleno].nrhs==0 ){
+#ifdef YYTRACKMAXSTACKDEPTH
+ if( (int)(yypParser->yytos - yypParser->yystack)>yypParser->yyhwm ){
+ yypParser->yyhwm++;
+ assert( yypParser->yyhwm == (int)(yypParser->yytos - yypParser->yystack));
+ }
+#endif
+#if YYSTACKDEPTH>0
+ if( yypParser->yytos>=yypParser->yystackEnd ){
+ yyStackOverflow(yypParser);
+ return;
+ }
+#else
+ if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz-1] ){
+ if( yyGrowStack(yypParser) ){
+ yyStackOverflow(yypParser);
+ return;
+ }
+ yymsp = yypParser->yytos;
+ }
+#endif
+ }
switch( yyruleno ){
/* Beginning here are the reduction cases. A typical example
** #line <lineno> <thisfile>
** break;
*/
- case 5: /* explain ::= */
-{ sqlite3BeginParse(pParse, 0); }
- break;
- case 6: /* explain ::= EXPLAIN */
-{ sqlite3BeginParse(pParse, 1); }
+/********** Begin reduce actions **********************************************/
+ YYMINORTYPE yylhsminor;
+ case 0: /* explain ::= EXPLAIN */
+{ pParse->explain = 1; }
break;
- case 7: /* explain ::= EXPLAIN QUERY PLAN */
-{ sqlite3BeginParse(pParse, 2); }
+ case 1: /* explain ::= EXPLAIN QUERY PLAN */
+{ pParse->explain = 2; }
break;
- case 8: /* cmdx ::= cmd */
+ case 2: /* cmdx ::= cmd */
{ sqlite3FinishCoding(pParse); }
break;
- case 9: /* cmd ::= BEGIN transtype trans_opt */
-{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy328);}
+ case 3: /* cmd ::= BEGIN transtype trans_opt */
+{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy4);}
break;
- case 13: /* transtype ::= */
-{yygotominor.yy328 = TK_DEFERRED;}
+ case 4: /* transtype ::= */
+{yymsp[1].minor.yy4 = TK_DEFERRED;}
break;
- case 14: /* transtype ::= DEFERRED */
- case 15: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==15);
- case 16: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==16);
- case 115: /* multiselect_op ::= UNION */ yytestcase(yyruleno==115);
- case 117: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==117);
-{yygotominor.yy328 = yymsp[0].major;}
+ case 5: /* transtype ::= DEFERRED */
+ case 6: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==6);
+ case 7: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==7);
+{yymsp[0].minor.yy4 = yymsp[0].major; /*A-overwrites-X*/}
break;
- case 17: /* cmd ::= COMMIT trans_opt */
- case 18: /* cmd ::= END trans_opt */ yytestcase(yyruleno==18);
-{sqlite3CommitTransaction(pParse);}
+ case 8: /* cmd ::= COMMIT|END trans_opt */
+ case 9: /* cmd ::= ROLLBACK trans_opt */ yytestcase(yyruleno==9);
+{sqlite3EndTransaction(pParse,yymsp[-1].major);}
break;
- case 19: /* cmd ::= ROLLBACK trans_opt */
-{sqlite3RollbackTransaction(pParse);}
- break;
- case 22: /* cmd ::= SAVEPOINT nm */
+ case 10: /* cmd ::= SAVEPOINT nm */
{
sqlite3Savepoint(pParse, SAVEPOINT_BEGIN, &yymsp[0].minor.yy0);
}
break;
- case 23: /* cmd ::= RELEASE savepoint_opt nm */
+ case 11: /* cmd ::= RELEASE savepoint_opt nm */
{
sqlite3Savepoint(pParse, SAVEPOINT_RELEASE, &yymsp[0].minor.yy0);
}
break;
- case 24: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */
+ case 12: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */
{
sqlite3Savepoint(pParse, SAVEPOINT_ROLLBACK, &yymsp[0].minor.yy0);
}
break;
- case 26: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */
+ case 13: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */
{
- sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy328,0,0,yymsp[-2].minor.yy328);
+ sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy4,0,0,yymsp[-2].minor.yy4);
}
break;
- case 27: /* createkw ::= CREATE */
-{
- pParse->db->lookaside.bEnabled = 0;
- yygotominor.yy0 = yymsp[0].minor.yy0;
-}
+ case 14: /* createkw ::= CREATE */
+{disableLookaside(pParse);}
+ break;
+ case 15: /* ifnotexists ::= */
+ case 18: /* temp ::= */ yytestcase(yyruleno==18);
+ case 21: /* table_options ::= */ yytestcase(yyruleno==21);
+ case 42: /* autoinc ::= */ yytestcase(yyruleno==42);
+ case 57: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==57);
+ case 67: /* defer_subclause_opt ::= */ yytestcase(yyruleno==67);
+ case 76: /* ifexists ::= */ yytestcase(yyruleno==76);
+ case 90: /* distinct ::= */ yytestcase(yyruleno==90);
+ case 213: /* collate ::= */ yytestcase(yyruleno==213);
+{yymsp[1].minor.yy4 = 0;}
break;
- case 28: /* ifnotexists ::= */
- case 31: /* temp ::= */ yytestcase(yyruleno==31);
- case 68: /* autoinc ::= */ yytestcase(yyruleno==68);
- case 81: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ yytestcase(yyruleno==81);
- case 83: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==83);
- case 85: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ yytestcase(yyruleno==85);
- case 97: /* defer_subclause_opt ::= */ yytestcase(yyruleno==97);
- case 108: /* ifexists ::= */ yytestcase(yyruleno==108);
- case 219: /* between_op ::= BETWEEN */ yytestcase(yyruleno==219);
- case 222: /* in_op ::= IN */ yytestcase(yyruleno==222);
- case 247: /* collate ::= */ yytestcase(yyruleno==247);
-{yygotominor.yy328 = 0;}
+ case 16: /* ifnotexists ::= IF NOT EXISTS */
+{yymsp[-2].minor.yy4 = 1;}
break;
- case 29: /* ifnotexists ::= IF NOT EXISTS */
- case 30: /* temp ::= TEMP */ yytestcase(yyruleno==30);
- case 69: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==69);
- case 84: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ yytestcase(yyruleno==84);
- case 107: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==107);
- case 220: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==220);
- case 223: /* in_op ::= NOT IN */ yytestcase(yyruleno==223);
- case 248: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==248);
-{yygotominor.yy328 = 1;}
+ case 17: /* temp ::= TEMP */
+ case 43: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==43);
+{yymsp[0].minor.yy4 = 1;}
break;
- case 32: /* create_table_args ::= LP columnlist conslist_opt RP table_options */
+ case 19: /* create_table_args ::= LP columnlist conslist_opt RP table_options */
{
- sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy186,0);
+ sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy4,0);
}
break;
- case 33: /* create_table_args ::= AS select */
+ case 20: /* create_table_args ::= AS select */
{
- sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy3);
- sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy3);
+ sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy387);
+ sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy387);
}
break;
- case 34: /* table_options ::= */
-{yygotominor.yy186 = 0;}
- break;
- case 35: /* table_options ::= WITHOUT nm */
+ case 22: /* table_options ::= WITHOUT nm */
{
if( yymsp[0].minor.yy0.n==5 && sqlite3_strnicmp(yymsp[0].minor.yy0.z,"rowid",5)==0 ){
- yygotominor.yy186 = TF_WithoutRowid | TF_NoVisibleRowid;
+ yymsp[-1].minor.yy4 = TF_WithoutRowid | TF_NoVisibleRowid;
}else{
- yygotominor.yy186 = 0;
+ yymsp[-1].minor.yy4 = 0;
sqlite3ErrorMsg(pParse, "unknown table option: %.*s", yymsp[0].minor.yy0.n, yymsp[0].minor.yy0.z);
}
}
break;
- case 38: /* column ::= columnid type carglist */
-{
- yygotominor.yy0.z = yymsp[-2].minor.yy0.z;
- yygotominor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-2].minor.yy0.z) + pParse->sLastToken.n;
-}
+ case 23: /* columnname ::= nm typetoken */
+{sqlite3AddColumn(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);}
+ break;
+ case 24: /* typetoken ::= */
+ case 60: /* conslist_opt ::= */ yytestcase(yyruleno==60);
+ case 96: /* as ::= */ yytestcase(yyruleno==96);
+{yymsp[1].minor.yy0.n = 0; yymsp[1].minor.yy0.z = 0;}
break;
- case 39: /* columnid ::= nm */
+ case 25: /* typetoken ::= typename LP signed RP */
{
- sqlite3AddColumn(pParse,&yymsp[0].minor.yy0);
- yygotominor.yy0 = yymsp[0].minor.yy0;
- pParse->constraintName.n = 0;
+ yymsp[-3].minor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-3].minor.yy0.z);
}
break;
- case 40: /* nm ::= ID|INDEXED */
- case 41: /* nm ::= STRING */ yytestcase(yyruleno==41);
- case 42: /* nm ::= JOIN_KW */ yytestcase(yyruleno==42);
- case 45: /* typetoken ::= typename */ yytestcase(yyruleno==45);
- case 48: /* typename ::= ID|STRING */ yytestcase(yyruleno==48);
- case 130: /* as ::= AS nm */ yytestcase(yyruleno==130);
- case 131: /* as ::= ID|STRING */ yytestcase(yyruleno==131);
- case 142: /* dbnm ::= DOT nm */ yytestcase(yyruleno==142);
- case 151: /* indexed_opt ::= INDEXED BY nm */ yytestcase(yyruleno==151);
- case 257: /* nmnum ::= plus_num */ yytestcase(yyruleno==257);
- case 258: /* nmnum ::= nm */ yytestcase(yyruleno==258);
- case 259: /* nmnum ::= ON */ yytestcase(yyruleno==259);
- case 260: /* nmnum ::= DELETE */ yytestcase(yyruleno==260);
- case 261: /* nmnum ::= DEFAULT */ yytestcase(yyruleno==261);
- case 262: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==262);
- case 263: /* plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==263);
- case 264: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==264);
- case 280: /* trnm ::= nm */ yytestcase(yyruleno==280);
-{yygotominor.yy0 = yymsp[0].minor.yy0;}
- break;
- case 44: /* type ::= typetoken */
-{sqlite3AddColumnType(pParse,&yymsp[0].minor.yy0);}
- break;
- case 46: /* typetoken ::= typename LP signed RP */
+ case 26: /* typetoken ::= typename LP signed COMMA signed RP */
{
- yygotominor.yy0.z = yymsp[-3].minor.yy0.z;
- yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-3].minor.yy0.z);
+ yymsp[-5].minor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-5].minor.yy0.z);
}
break;
- case 47: /* typetoken ::= typename LP signed COMMA signed RP */
+ case 27: /* typename ::= typename ID|STRING */
+{yymsp[-1].minor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);}
+ break;
+ case 28: /* scanpt ::= */
{
- yygotominor.yy0.z = yymsp[-5].minor.yy0.z;
- yygotominor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-5].minor.yy0.z);
+ assert( yyLookahead!=YYNOCODE );
+ yymsp[1].minor.yy336 = yyLookaheadToken.z;
}
break;
- case 49: /* typename ::= typename ID|STRING */
-{yygotominor.yy0.z=yymsp[-1].minor.yy0.z; yygotominor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);}
- break;
- case 54: /* ccons ::= CONSTRAINT nm */
- case 92: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==92);
+ case 29: /* ccons ::= CONSTRAINT nm */
+ case 62: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==62);
{pParse->constraintName = yymsp[0].minor.yy0;}
break;
- case 55: /* ccons ::= DEFAULT term */
- case 57: /* ccons ::= DEFAULT PLUS term */ yytestcase(yyruleno==57);
-{sqlite3AddDefaultValue(pParse,&yymsp[0].minor.yy346);}
+ case 30: /* ccons ::= DEFAULT scanpt term scanpt */
+{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy314,yymsp[-2].minor.yy336,yymsp[0].minor.yy336);}
+ break;
+ case 31: /* ccons ::= DEFAULT LP expr RP */
+{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy314,yymsp[-2].minor.yy0.z+1,yymsp[0].minor.yy0.z);}
break;
- case 56: /* ccons ::= DEFAULT LP expr RP */
-{sqlite3AddDefaultValue(pParse,&yymsp[-1].minor.yy346);}
+ case 32: /* ccons ::= DEFAULT PLUS term scanpt */
+{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy314,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy336);}
break;
- case 58: /* ccons ::= DEFAULT MINUS term */
+ case 33: /* ccons ::= DEFAULT MINUS term scanpt */
{
- ExprSpan v;
- v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy346.pExpr, 0, 0);
- v.zStart = yymsp[-1].minor.yy0.z;
- v.zEnd = yymsp[0].minor.yy346.zEnd;
- sqlite3AddDefaultValue(pParse,&v);
+ Expr *p = sqlite3PExpr(pParse, TK_UMINUS, yymsp[-1].minor.yy314, 0);
+ sqlite3AddDefaultValue(pParse,p,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy336);
}
break;
- case 59: /* ccons ::= DEFAULT ID|INDEXED */
+ case 34: /* ccons ::= DEFAULT scanpt ID|INDEXED */
{
- ExprSpan v;
- spanExpr(&v, pParse, TK_STRING, &yymsp[0].minor.yy0);
- sqlite3AddDefaultValue(pParse,&v);
+ Expr *p = tokenExpr(pParse, TK_STRING, yymsp[0].minor.yy0);
+ if( p ){
+ sqlite3ExprIdToTrueFalse(p);
+ testcase( p->op==TK_TRUEFALSE && sqlite3ExprTruthValue(p) );
+ }
+ sqlite3AddDefaultValue(pParse,p,yymsp[0].minor.yy0.z,yymsp[0].minor.yy0.z+yymsp[0].minor.yy0.n);
}
break;
- case 61: /* ccons ::= NOT NULL onconf */
-{sqlite3AddNotNull(pParse, yymsp[0].minor.yy328);}
+ case 35: /* ccons ::= NOT NULL onconf */
+{sqlite3AddNotNull(pParse, yymsp[0].minor.yy4);}
break;
- case 62: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */
-{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy328,yymsp[0].minor.yy328,yymsp[-2].minor.yy328);}
+ case 36: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */
+{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy4,yymsp[0].minor.yy4,yymsp[-2].minor.yy4);}
break;
- case 63: /* ccons ::= UNIQUE onconf */
-{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy328,0,0,0,0);}
+ case 37: /* ccons ::= UNIQUE onconf */
+{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy4,0,0,0,0,
+ SQLITE_IDXTYPE_UNIQUE);}
break;
- case 64: /* ccons ::= CHECK LP expr RP */
-{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy346.pExpr);}
+ case 38: /* ccons ::= CHECK LP expr RP */
+{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy314);}
break;
- case 65: /* ccons ::= REFERENCES nm eidlist_opt refargs */
-{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy14,yymsp[0].minor.yy328);}
+ case 39: /* ccons ::= REFERENCES nm eidlist_opt refargs */
+{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy322,yymsp[0].minor.yy4);}
break;
- case 66: /* ccons ::= defer_subclause */
-{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy328);}
+ case 40: /* ccons ::= defer_subclause */
+{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy4);}
break;
- case 67: /* ccons ::= COLLATE ID|STRING */
+ case 41: /* ccons ::= COLLATE ID|STRING */
{sqlite3AddCollateType(pParse, &yymsp[0].minor.yy0);}
break;
- case 70: /* refargs ::= */
-{ yygotominor.yy328 = OE_None*0x0101; /* EV: R-19803-45884 */}
+ case 44: /* refargs ::= */
+{ yymsp[1].minor.yy4 = OE_None*0x0101; /* EV: R-19803-45884 */}
break;
- case 71: /* refargs ::= refargs refarg */
-{ yygotominor.yy328 = (yymsp[-1].minor.yy328 & ~yymsp[0].minor.yy429.mask) | yymsp[0].minor.yy429.value; }
+ case 45: /* refargs ::= refargs refarg */
+{ yymsp[-1].minor.yy4 = (yymsp[-1].minor.yy4 & ~yymsp[0].minor.yy215.mask) | yymsp[0].minor.yy215.value; }
break;
- case 72: /* refarg ::= MATCH nm */
- case 73: /* refarg ::= ON INSERT refact */ yytestcase(yyruleno==73);
-{ yygotominor.yy429.value = 0; yygotominor.yy429.mask = 0x000000; }
+ case 46: /* refarg ::= MATCH nm */
+{ yymsp[-1].minor.yy215.value = 0; yymsp[-1].minor.yy215.mask = 0x000000; }
break;
- case 74: /* refarg ::= ON DELETE refact */
-{ yygotominor.yy429.value = yymsp[0].minor.yy328; yygotominor.yy429.mask = 0x0000ff; }
+ case 47: /* refarg ::= ON INSERT refact */
+{ yymsp[-2].minor.yy215.value = 0; yymsp[-2].minor.yy215.mask = 0x000000; }
break;
- case 75: /* refarg ::= ON UPDATE refact */
-{ yygotominor.yy429.value = yymsp[0].minor.yy328<<8; yygotominor.yy429.mask = 0x00ff00; }
+ case 48: /* refarg ::= ON DELETE refact */
+{ yymsp[-2].minor.yy215.value = yymsp[0].minor.yy4; yymsp[-2].minor.yy215.mask = 0x0000ff; }
break;
- case 76: /* refact ::= SET NULL */
-{ yygotominor.yy328 = OE_SetNull; /* EV: R-33326-45252 */}
+ case 49: /* refarg ::= ON UPDATE refact */
+{ yymsp[-2].minor.yy215.value = yymsp[0].minor.yy4<<8; yymsp[-2].minor.yy215.mask = 0x00ff00; }
break;
- case 77: /* refact ::= SET DEFAULT */
-{ yygotominor.yy328 = OE_SetDflt; /* EV: R-33326-45252 */}
+ case 50: /* refact ::= SET NULL */
+{ yymsp[-1].minor.yy4 = OE_SetNull; /* EV: R-33326-45252 */}
break;
- case 78: /* refact ::= CASCADE */
-{ yygotominor.yy328 = OE_Cascade; /* EV: R-33326-45252 */}
+ case 51: /* refact ::= SET DEFAULT */
+{ yymsp[-1].minor.yy4 = OE_SetDflt; /* EV: R-33326-45252 */}
break;
- case 79: /* refact ::= RESTRICT */
-{ yygotominor.yy328 = OE_Restrict; /* EV: R-33326-45252 */}
+ case 52: /* refact ::= CASCADE */
+{ yymsp[0].minor.yy4 = OE_Cascade; /* EV: R-33326-45252 */}
break;
- case 80: /* refact ::= NO ACTION */
-{ yygotominor.yy328 = OE_None; /* EV: R-33326-45252 */}
+ case 53: /* refact ::= RESTRICT */
+{ yymsp[0].minor.yy4 = OE_Restrict; /* EV: R-33326-45252 */}
break;
- case 82: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */
- case 98: /* defer_subclause_opt ::= defer_subclause */ yytestcase(yyruleno==98);
- case 100: /* onconf ::= ON CONFLICT resolvetype */ yytestcase(yyruleno==100);
- case 103: /* resolvetype ::= raisetype */ yytestcase(yyruleno==103);
-{yygotominor.yy328 = yymsp[0].minor.yy328;}
+ case 54: /* refact ::= NO ACTION */
+{ yymsp[-1].minor.yy4 = OE_None; /* EV: R-33326-45252 */}
break;
- case 86: /* conslist_opt ::= */
-{yygotominor.yy0.n = 0; yygotominor.yy0.z = 0;}
+ case 55: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */
+{yymsp[-2].minor.yy4 = 0;}
break;
- case 87: /* conslist_opt ::= COMMA conslist */
-{yygotominor.yy0 = yymsp[-1].minor.yy0;}
+ case 56: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */
+ case 71: /* orconf ::= OR resolvetype */ yytestcase(yyruleno==71);
+ case 144: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==144);
+{yymsp[-1].minor.yy4 = yymsp[0].minor.yy4;}
break;
- case 90: /* tconscomma ::= COMMA */
+ case 58: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */
+ case 75: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==75);
+ case 185: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==185);
+ case 188: /* in_op ::= NOT IN */ yytestcase(yyruleno==188);
+ case 214: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==214);
+{yymsp[-1].minor.yy4 = 1;}
+ break;
+ case 59: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */
+{yymsp[-1].minor.yy4 = 0;}
+ break;
+ case 61: /* tconscomma ::= COMMA */
{pParse->constraintName.n = 0;}
break;
- case 93: /* tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */
-{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy14,yymsp[0].minor.yy328,yymsp[-2].minor.yy328,0);}
+ case 63: /* tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */
+{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy322,yymsp[0].minor.yy4,yymsp[-2].minor.yy4,0);}
break;
- case 94: /* tcons ::= UNIQUE LP sortlist RP onconf */
-{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy14,yymsp[0].minor.yy328,0,0,0,0);}
+ case 64: /* tcons ::= UNIQUE LP sortlist RP onconf */
+{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy322,yymsp[0].minor.yy4,0,0,0,0,
+ SQLITE_IDXTYPE_UNIQUE);}
break;
- case 95: /* tcons ::= CHECK LP expr RP onconf */
-{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy346.pExpr);}
+ case 65: /* tcons ::= CHECK LP expr RP onconf */
+{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy314);}
break;
- case 96: /* tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */
+ case 66: /* tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */
{
- sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy14, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy14, yymsp[-1].minor.yy328);
- sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy328);
+ sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy322, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy322, yymsp[-1].minor.yy4);
+ sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy4);
}
break;
- case 99: /* onconf ::= */
-{yygotominor.yy328 = OE_Default;}
+ case 68: /* onconf ::= */
+ case 70: /* orconf ::= */ yytestcase(yyruleno==70);
+{yymsp[1].minor.yy4 = OE_Default;}
break;
- case 101: /* orconf ::= */
-{yygotominor.yy186 = OE_Default;}
+ case 69: /* onconf ::= ON CONFLICT resolvetype */
+{yymsp[-2].minor.yy4 = yymsp[0].minor.yy4;}
break;
- case 102: /* orconf ::= OR resolvetype */
-{yygotominor.yy186 = (u8)yymsp[0].minor.yy328;}
+ case 72: /* resolvetype ::= IGNORE */
+{yymsp[0].minor.yy4 = OE_Ignore;}
break;
- case 104: /* resolvetype ::= IGNORE */
-{yygotominor.yy328 = OE_Ignore;}
+ case 73: /* resolvetype ::= REPLACE */
+ case 145: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==145);
+{yymsp[0].minor.yy4 = OE_Replace;}
break;
- case 105: /* resolvetype ::= REPLACE */
-{yygotominor.yy328 = OE_Replace;}
- break;
- case 106: /* cmd ::= DROP TABLE ifexists fullname */
+ case 74: /* cmd ::= DROP TABLE ifexists fullname */
{
- sqlite3DropTable(pParse, yymsp[0].minor.yy65, 0, yymsp[-1].minor.yy328);
+ sqlite3DropTable(pParse, yymsp[0].minor.yy259, 0, yymsp[-1].minor.yy4);
}
break;
- case 109: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */
+ case 77: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */
{
- sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy14, yymsp[0].minor.yy3, yymsp[-7].minor.yy328, yymsp[-5].minor.yy328);
+ sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy322, yymsp[0].minor.yy387, yymsp[-7].minor.yy4, yymsp[-5].minor.yy4);
}
break;
- case 110: /* cmd ::= DROP VIEW ifexists fullname */
+ case 78: /* cmd ::= DROP VIEW ifexists fullname */
{
- sqlite3DropTable(pParse, yymsp[0].minor.yy65, 1, yymsp[-1].minor.yy328);
+ sqlite3DropTable(pParse, yymsp[0].minor.yy259, 1, yymsp[-1].minor.yy4);
}
break;
- case 111: /* cmd ::= select */
+ case 79: /* cmd ::= select */
{
SelectDest dest = {SRT_Output, 0, 0, 0, 0, 0};
- sqlite3Select(pParse, yymsp[0].minor.yy3, &dest);
- sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy3);
+ sqlite3Select(pParse, yymsp[0].minor.yy387, &dest);
+ sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy387);
}
break;
- case 112: /* select ::= with selectnowith */
+ case 80: /* select ::= with selectnowith */
{
- Select *p = yymsp[0].minor.yy3;
+ Select *p = yymsp[0].minor.yy387;
if( p ){
- p->pWith = yymsp[-1].minor.yy59;
+ p->pWith = yymsp[-1].minor.yy451;
parserDoubleLinkSelect(pParse, p);
}else{
- sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy59);
+ sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy451);
}
- yygotominor.yy3 = p;
+ yymsp[-1].minor.yy387 = p; /*A-overwrites-W*/
}
break;
- case 113: /* selectnowith ::= oneselect */
- case 119: /* oneselect ::= values */ yytestcase(yyruleno==119);
-{yygotominor.yy3 = yymsp[0].minor.yy3;}
- break;
- case 114: /* selectnowith ::= selectnowith multiselect_op oneselect */
+ case 81: /* selectnowith ::= selectnowith multiselect_op oneselect */
{
- Select *pRhs = yymsp[0].minor.yy3;
- Select *pLhs = yymsp[-2].minor.yy3;
+ Select *pRhs = yymsp[0].minor.yy387;
+ Select *pLhs = yymsp[-2].minor.yy387;
if( pRhs && pRhs->pPrior ){
SrcList *pFrom;
Token x;
x.n = 0;
parserDoubleLinkSelect(pParse, pRhs);
pFrom = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&x,pRhs,0,0);
- pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0,0);
+ pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0);
}
if( pRhs ){
- pRhs->op = (u8)yymsp[-1].minor.yy328;
+ pRhs->op = (u8)yymsp[-1].minor.yy4;
pRhs->pPrior = pLhs;
if( ALWAYS(pLhs) ) pLhs->selFlags &= ~SF_MultiValue;
pRhs->selFlags &= ~SF_MultiValue;
- if( yymsp[-1].minor.yy328!=TK_ALL ) pParse->hasCompound = 1;
+ if( yymsp[-1].minor.yy4!=TK_ALL ) pParse->hasCompound = 1;
}else{
sqlite3SelectDelete(pParse->db, pLhs);
}
- yygotominor.yy3 = pRhs;
+ yymsp[-2].minor.yy387 = pRhs;
}
break;
- case 116: /* multiselect_op ::= UNION ALL */
-{yygotominor.yy328 = TK_ALL;}
+ case 82: /* multiselect_op ::= UNION */
+ case 84: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==84);
+{yymsp[0].minor.yy4 = yymsp[0].major; /*A-overwrites-OP*/}
break;
- case 118: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */
+ case 83: /* multiselect_op ::= UNION ALL */
+{yymsp[-1].minor.yy4 = TK_ALL;}
+ break;
+ case 85: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */
{
- yygotominor.yy3 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy14,yymsp[-5].minor.yy65,yymsp[-4].minor.yy132,yymsp[-3].minor.yy14,yymsp[-2].minor.yy132,yymsp[-1].minor.yy14,yymsp[-7].minor.yy381,yymsp[0].minor.yy476.pLimit,yymsp[0].minor.yy476.pOffset);
+#if SELECTTRACE_ENABLED
+ Token s = yymsp[-8].minor.yy0; /*A-overwrites-S*/
+#endif
+ yymsp[-8].minor.yy387 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy322,yymsp[-5].minor.yy259,yymsp[-4].minor.yy314,yymsp[-3].minor.yy322,yymsp[-2].minor.yy314,yymsp[-1].minor.yy322,yymsp[-7].minor.yy4,yymsp[0].minor.yy314);
#if SELECTTRACE_ENABLED
/* Populate the Select.zSelName[] string that is used to help with
** query planner debugging, to differentiate between multiple Select
** comment to be the zSelName value. Otherwise, the label is #N where
** is an integer that is incremented with each SELECT statement seen.
*/
- if( yygotominor.yy3!=0 ){
- const char *z = yymsp[-8].minor.yy0.z+6;
+ if( yymsp[-8].minor.yy387!=0 ){
+ const char *z = s.z+6;
int i;
- sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "#%d",
- ++pParse->nSelect);
+ sqlite3_snprintf(sizeof(yymsp[-8].minor.yy387->zSelName), yymsp[-8].minor.yy387->zSelName,"#%d",++pParse->nSelect);
while( z[0]==' ' ) z++;
if( z[0]=='/' && z[1]=='*' ){
z += 2;
while( z[0]==' ' ) z++;
for(i=0; sqlite3Isalnum(z[i]); i++){}
- sqlite3_snprintf(sizeof(yygotominor.yy3->zSelName), yygotominor.yy3->zSelName, "%.*s", i, z);
+ sqlite3_snprintf(sizeof(yymsp[-8].minor.yy387->zSelName), yymsp[-8].minor.yy387->zSelName, "%.*s", i, z);
}
}
#endif /* SELECTRACE_ENABLED */
}
break;
- case 120: /* values ::= VALUES LP nexprlist RP */
+ case 86: /* values ::= VALUES LP nexprlist RP */
{
- yygotominor.yy3 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy14,0,0,0,0,0,SF_Values,0,0);
+ yymsp[-3].minor.yy387 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy322,0,0,0,0,0,SF_Values,0);
}
break;
- case 121: /* values ::= values COMMA LP exprlist RP */
+ case 87: /* values ::= values COMMA LP exprlist RP */
{
- Select *pRight, *pLeft = yymsp[-4].minor.yy3;
- pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy14,0,0,0,0,0,SF_Values|SF_MultiValue,0,0);
+ Select *pRight, *pLeft = yymsp[-4].minor.yy387;
+ pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy322,0,0,0,0,0,SF_Values|SF_MultiValue,0);
if( ALWAYS(pLeft) ) pLeft->selFlags &= ~SF_MultiValue;
if( pRight ){
pRight->op = TK_ALL;
- pLeft = yymsp[-4].minor.yy3;
pRight->pPrior = pLeft;
- yygotominor.yy3 = pRight;
+ yymsp[-4].minor.yy387 = pRight;
}else{
- yygotominor.yy3 = pLeft;
+ yymsp[-4].minor.yy387 = pLeft;
}
}
break;
- case 122: /* distinct ::= DISTINCT */
-{yygotominor.yy381 = SF_Distinct;}
- break;
- case 123: /* distinct ::= ALL */
-{yygotominor.yy381 = SF_All;}
+ case 88: /* distinct ::= DISTINCT */
+{yymsp[0].minor.yy4 = SF_Distinct;}
break;
- case 124: /* distinct ::= */
-{yygotominor.yy381 = 0;}
+ case 89: /* distinct ::= ALL */
+{yymsp[0].minor.yy4 = SF_All;}
break;
- case 125: /* sclp ::= selcollist COMMA */
- case 244: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==244);
-{yygotominor.yy14 = yymsp[-1].minor.yy14;}
+ case 91: /* sclp ::= */
+ case 119: /* orderby_opt ::= */ yytestcase(yyruleno==119);
+ case 126: /* groupby_opt ::= */ yytestcase(yyruleno==126);
+ case 201: /* exprlist ::= */ yytestcase(yyruleno==201);
+ case 204: /* paren_exprlist ::= */ yytestcase(yyruleno==204);
+ case 209: /* eidlist_opt ::= */ yytestcase(yyruleno==209);
+{yymsp[1].minor.yy322 = 0;}
break;
- case 126: /* sclp ::= */
- case 155: /* orderby_opt ::= */ yytestcase(yyruleno==155);
- case 162: /* groupby_opt ::= */ yytestcase(yyruleno==162);
- case 237: /* exprlist ::= */ yytestcase(yyruleno==237);
- case 243: /* eidlist_opt ::= */ yytestcase(yyruleno==243);
-{yygotominor.yy14 = 0;}
- break;
- case 127: /* selcollist ::= sclp expr as */
+ case 92: /* selcollist ::= sclp scanpt expr scanpt as */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy14, yymsp[-1].minor.yy346.pExpr);
- if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yygotominor.yy14, &yymsp[0].minor.yy0, 1);
- sqlite3ExprListSetSpan(pParse,yygotominor.yy14,&yymsp[-1].minor.yy346);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy322, yymsp[-2].minor.yy314);
+ if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy322, &yymsp[0].minor.yy0, 1);
+ sqlite3ExprListSetSpan(pParse,yymsp[-4].minor.yy322,yymsp[-3].minor.yy336,yymsp[-1].minor.yy336);
}
break;
- case 128: /* selcollist ::= sclp STAR */
+ case 93: /* selcollist ::= sclp scanpt STAR */
{
- Expr *p = sqlite3Expr(pParse->db, TK_ALL, 0);
- yygotominor.yy14 = sqlite3ExprListAppend(pParse, yymsp[-1].minor.yy14, p);
+ Expr *p = sqlite3Expr(pParse->db, TK_ASTERISK, 0);
+ yymsp[-2].minor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy322, p);
}
break;
- case 129: /* selcollist ::= sclp nm DOT STAR */
+ case 94: /* selcollist ::= sclp scanpt nm DOT STAR */
{
- Expr *pRight = sqlite3PExpr(pParse, TK_ALL, 0, 0, &yymsp[0].minor.yy0);
- Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
- Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy14, pDot);
+ Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0);
+ Expr *pLeft = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1);
+ Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy322, pDot);
}
break;
- case 132: /* as ::= */
-{yygotominor.yy0.n = 0;}
+ case 95: /* as ::= AS nm */
+ case 106: /* dbnm ::= DOT nm */ yytestcase(yyruleno==106);
+ case 223: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==223);
+ case 224: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==224);
+{yymsp[-1].minor.yy0 = yymsp[0].minor.yy0;}
break;
- case 133: /* from ::= */
-{yygotominor.yy65 = sqlite3DbMallocZero(pParse->db, sizeof(*yygotominor.yy65));}
+ case 97: /* from ::= */
+{yymsp[1].minor.yy259 = sqlite3DbMallocZero(pParse->db, sizeof(*yymsp[1].minor.yy259));}
break;
- case 134: /* from ::= FROM seltablist */
+ case 98: /* from ::= FROM seltablist */
{
- yygotominor.yy65 = yymsp[0].minor.yy65;
- sqlite3SrcListShiftJoinType(yygotominor.yy65);
+ yymsp[-1].minor.yy259 = yymsp[0].minor.yy259;
+ sqlite3SrcListShiftJoinType(yymsp[-1].minor.yy259);
}
break;
- case 135: /* stl_prefix ::= seltablist joinop */
+ case 99: /* stl_prefix ::= seltablist joinop */
{
- yygotominor.yy65 = yymsp[-1].minor.yy65;
- if( ALWAYS(yygotominor.yy65 && yygotominor.yy65->nSrc>0) ) yygotominor.yy65->a[yygotominor.yy65->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy328;
+ if( ALWAYS(yymsp[-1].minor.yy259 && yymsp[-1].minor.yy259->nSrc>0) ) yymsp[-1].minor.yy259->a[yymsp[-1].minor.yy259->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy4;
}
break;
- case 136: /* stl_prefix ::= */
-{yygotominor.yy65 = 0;}
+ case 100: /* stl_prefix ::= */
+{yymsp[1].minor.yy259 = 0;}
break;
- case 137: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */
+ case 101: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */
{
- yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy132,yymsp[0].minor.yy408);
- sqlite3SrcListIndexedBy(pParse, yygotominor.yy65, &yymsp[-2].minor.yy0);
+ yymsp[-6].minor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy314,yymsp[0].minor.yy384);
+ sqlite3SrcListIndexedBy(pParse, yymsp[-6].minor.yy259, &yymsp[-2].minor.yy0);
}
break;
- case 138: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */
+ case 102: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */
{
- yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy65,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy132,yymsp[0].minor.yy408);
- sqlite3SrcListFuncArgs(pParse, yygotominor.yy65, yymsp[-4].minor.yy14);
+ yymsp[-8].minor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy259,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy314,yymsp[0].minor.yy384);
+ sqlite3SrcListFuncArgs(pParse, yymsp[-8].minor.yy259, yymsp[-4].minor.yy322);
}
break;
- case 139: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */
+ case 103: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */
{
- yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy3,yymsp[-1].minor.yy132,yymsp[0].minor.yy408);
+ yymsp[-6].minor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy387,yymsp[-1].minor.yy314,yymsp[0].minor.yy384);
}
break;
- case 140: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */
+ case 104: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */
{
- if( yymsp[-6].minor.yy65==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy132==0 && yymsp[0].minor.yy408==0 ){
- yygotominor.yy65 = yymsp[-4].minor.yy65;
- }else if( yymsp[-4].minor.yy65->nSrc==1 ){
- yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy132,yymsp[0].minor.yy408);
- if( yygotominor.yy65 ){
- struct SrcList_item *pNew = &yygotominor.yy65->a[yygotominor.yy65->nSrc-1];
- struct SrcList_item *pOld = yymsp[-4].minor.yy65->a;
+ if( yymsp[-6].minor.yy259==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy314==0 && yymsp[0].minor.yy384==0 ){
+ yymsp[-6].minor.yy259 = yymsp[-4].minor.yy259;
+ }else if( yymsp[-4].minor.yy259->nSrc==1 ){
+ yymsp[-6].minor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy314,yymsp[0].minor.yy384);
+ if( yymsp[-6].minor.yy259 ){
+ struct SrcList_item *pNew = &yymsp[-6].minor.yy259->a[yymsp[-6].minor.yy259->nSrc-1];
+ struct SrcList_item *pOld = yymsp[-4].minor.yy259->a;
pNew->zName = pOld->zName;
pNew->zDatabase = pOld->zDatabase;
pNew->pSelect = pOld->pSelect;
pOld->zName = pOld->zDatabase = 0;
pOld->pSelect = 0;
}
- sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy65);
+ sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy259);
}else{
Select *pSubquery;
- sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy65);
- pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy65,0,0,0,0,SF_NestedFrom,0,0);
- yygotominor.yy65 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy65,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy132,yymsp[0].minor.yy408);
+ sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy259);
+ pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy259,0,0,0,0,SF_NestedFrom,0);
+ yymsp[-6].minor.yy259 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy259,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy314,yymsp[0].minor.yy384);
}
}
break;
- case 141: /* dbnm ::= */
- case 150: /* indexed_opt ::= */ yytestcase(yyruleno==150);
-{yygotominor.yy0.z=0; yygotominor.yy0.n=0;}
+ case 105: /* dbnm ::= */
+ case 114: /* indexed_opt ::= */ yytestcase(yyruleno==114);
+{yymsp[1].minor.yy0.z=0; yymsp[1].minor.yy0.n=0;}
+ break;
+ case 107: /* fullname ::= nm dbnm */
+{yymsp[-1].minor.yy259 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/}
break;
- case 143: /* fullname ::= nm dbnm */
-{yygotominor.yy65 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);}
+ case 108: /* joinop ::= COMMA|JOIN */
+{ yymsp[0].minor.yy4 = JT_INNER; }
break;
- case 144: /* joinop ::= COMMA|JOIN */
-{ yygotominor.yy328 = JT_INNER; }
+ case 109: /* joinop ::= JOIN_KW JOIN */
+{yymsp[-1].minor.yy4 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); /*X-overwrites-A*/}
break;
- case 145: /* joinop ::= JOIN_KW JOIN */
-{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); }
+ case 110: /* joinop ::= JOIN_KW nm JOIN */
+{yymsp[-2].minor.yy4 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); /*X-overwrites-A*/}
break;
- case 146: /* joinop ::= JOIN_KW nm JOIN */
-{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); }
+ case 111: /* joinop ::= JOIN_KW nm nm JOIN */
+{yymsp[-3].minor.yy4 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);/*X-overwrites-A*/}
break;
- case 147: /* joinop ::= JOIN_KW nm nm JOIN */
-{ yygotominor.yy328 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); }
+ case 112: /* on_opt ::= ON expr */
+ case 129: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==129);
+ case 136: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==136);
+ case 197: /* case_else ::= ELSE expr */ yytestcase(yyruleno==197);
+{yymsp[-1].minor.yy314 = yymsp[0].minor.yy314;}
break;
- case 148: /* on_opt ::= ON expr */
- case 165: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==165);
- case 172: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==172);
- case 232: /* case_else ::= ELSE expr */ yytestcase(yyruleno==232);
- case 234: /* case_operand ::= expr */ yytestcase(yyruleno==234);
-{yygotominor.yy132 = yymsp[0].minor.yy346.pExpr;}
+ case 113: /* on_opt ::= */
+ case 128: /* having_opt ::= */ yytestcase(yyruleno==128);
+ case 130: /* limit_opt ::= */ yytestcase(yyruleno==130);
+ case 135: /* where_opt ::= */ yytestcase(yyruleno==135);
+ case 198: /* case_else ::= */ yytestcase(yyruleno==198);
+ case 200: /* case_operand ::= */ yytestcase(yyruleno==200);
+{yymsp[1].minor.yy314 = 0;}
break;
- case 149: /* on_opt ::= */
- case 164: /* having_opt ::= */ yytestcase(yyruleno==164);
- case 171: /* where_opt ::= */ yytestcase(yyruleno==171);
- case 233: /* case_else ::= */ yytestcase(yyruleno==233);
- case 235: /* case_operand ::= */ yytestcase(yyruleno==235);
-{yygotominor.yy132 = 0;}
+ case 115: /* indexed_opt ::= INDEXED BY nm */
+{yymsp[-2].minor.yy0 = yymsp[0].minor.yy0;}
break;
- case 152: /* indexed_opt ::= NOT INDEXED */
-{yygotominor.yy0.z=0; yygotominor.yy0.n=1;}
+ case 116: /* indexed_opt ::= NOT INDEXED */
+{yymsp[-1].minor.yy0.z=0; yymsp[-1].minor.yy0.n=1;}
break;
- case 153: /* using_opt ::= USING LP idlist RP */
- case 181: /* idlist_opt ::= LP idlist RP */ yytestcase(yyruleno==181);
-{yygotominor.yy408 = yymsp[-1].minor.yy408;}
+ case 117: /* using_opt ::= USING LP idlist RP */
+{yymsp[-3].minor.yy384 = yymsp[-1].minor.yy384;}
break;
- case 154: /* using_opt ::= */
- case 180: /* idlist_opt ::= */ yytestcase(yyruleno==180);
-{yygotominor.yy408 = 0;}
+ case 118: /* using_opt ::= */
+ case 146: /* idlist_opt ::= */ yytestcase(yyruleno==146);
+{yymsp[1].minor.yy384 = 0;}
break;
- case 156: /* orderby_opt ::= ORDER BY sortlist */
- case 163: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==163);
- case 236: /* exprlist ::= nexprlist */ yytestcase(yyruleno==236);
-{yygotominor.yy14 = yymsp[0].minor.yy14;}
+ case 120: /* orderby_opt ::= ORDER BY sortlist */
+ case 127: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==127);
+{yymsp[-2].minor.yy322 = yymsp[0].minor.yy322;}
break;
- case 157: /* sortlist ::= sortlist COMMA expr sortorder */
+ case 121: /* sortlist ::= sortlist COMMA expr sortorder */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy14,yymsp[-1].minor.yy346.pExpr);
- sqlite3ExprListSetSortOrder(yygotominor.yy14,yymsp[0].minor.yy328);
+ yymsp[-3].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy322,yymsp[-1].minor.yy314);
+ sqlite3ExprListSetSortOrder(yymsp[-3].minor.yy322,yymsp[0].minor.yy4);
}
break;
- case 158: /* sortlist ::= expr sortorder */
+ case 122: /* sortlist ::= expr sortorder */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy346.pExpr);
- sqlite3ExprListSetSortOrder(yygotominor.yy14,yymsp[0].minor.yy328);
+ yymsp[-1].minor.yy322 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy314); /*A-overwrites-Y*/
+ sqlite3ExprListSetSortOrder(yymsp[-1].minor.yy322,yymsp[0].minor.yy4);
}
break;
- case 159: /* sortorder ::= ASC */
-{yygotominor.yy328 = SQLITE_SO_ASC;}
+ case 123: /* sortorder ::= ASC */
+{yymsp[0].minor.yy4 = SQLITE_SO_ASC;}
break;
- case 160: /* sortorder ::= DESC */
-{yygotominor.yy328 = SQLITE_SO_DESC;}
+ case 124: /* sortorder ::= DESC */
+{yymsp[0].minor.yy4 = SQLITE_SO_DESC;}
break;
- case 161: /* sortorder ::= */
-{yygotominor.yy328 = SQLITE_SO_UNDEFINED;}
+ case 125: /* sortorder ::= */
+{yymsp[1].minor.yy4 = SQLITE_SO_UNDEFINED;}
break;
- case 166: /* limit_opt ::= */
-{yygotominor.yy476.pLimit = 0; yygotominor.yy476.pOffset = 0;}
+ case 131: /* limit_opt ::= LIMIT expr */
+{yymsp[-1].minor.yy314 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy314,0);}
break;
- case 167: /* limit_opt ::= LIMIT expr */
-{yygotominor.yy476.pLimit = yymsp[0].minor.yy346.pExpr; yygotominor.yy476.pOffset = 0;}
+ case 132: /* limit_opt ::= LIMIT expr OFFSET expr */
+{yymsp[-3].minor.yy314 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[-2].minor.yy314,yymsp[0].minor.yy314);}
break;
- case 168: /* limit_opt ::= LIMIT expr OFFSET expr */
-{yygotominor.yy476.pLimit = yymsp[-2].minor.yy346.pExpr; yygotominor.yy476.pOffset = yymsp[0].minor.yy346.pExpr;}
+ case 133: /* limit_opt ::= LIMIT expr COMMA expr */
+{yymsp[-3].minor.yy314 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy314,yymsp[-2].minor.yy314);}
break;
- case 169: /* limit_opt ::= LIMIT expr COMMA expr */
-{yygotominor.yy476.pOffset = yymsp[-2].minor.yy346.pExpr; yygotominor.yy476.pLimit = yymsp[0].minor.yy346.pExpr;}
- break;
- case 170: /* cmd ::= with DELETE FROM fullname indexed_opt where_opt */
+ case 134: /* cmd ::= with DELETE FROM fullname indexed_opt where_opt */
{
- sqlite3WithPush(pParse, yymsp[-5].minor.yy59, 1);
- sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy65, &yymsp[-1].minor.yy0);
- sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy65,yymsp[0].minor.yy132);
+ sqlite3WithPush(pParse, yymsp[-5].minor.yy451, 1);
+ sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy259, &yymsp[-1].minor.yy0);
+ sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy259,yymsp[0].minor.yy314,0,0);
}
break;
- case 173: /* cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt */
+ case 137: /* cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt */
{
- sqlite3WithPush(pParse, yymsp[-7].minor.yy59, 1);
- sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy65, &yymsp[-3].minor.yy0);
- sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy14,"set list");
- sqlite3Update(pParse,yymsp[-4].minor.yy65,yymsp[-1].minor.yy14,yymsp[0].minor.yy132,yymsp[-5].minor.yy186);
+ sqlite3WithPush(pParse, yymsp[-7].minor.yy451, 1);
+ sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy259, &yymsp[-3].minor.yy0);
+ sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy322,"set list");
+ sqlite3Update(pParse,yymsp[-4].minor.yy259,yymsp[-1].minor.yy322,yymsp[0].minor.yy314,yymsp[-5].minor.yy4,0,0);
}
break;
- case 174: /* setlist ::= setlist COMMA nm EQ expr */
+ case 138: /* setlist ::= setlist COMMA nm EQ expr */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy14, yymsp[0].minor.yy346.pExpr);
- sqlite3ExprListSetName(pParse, yygotominor.yy14, &yymsp[-2].minor.yy0, 1);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy322, yymsp[0].minor.yy314);
+ sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy322, &yymsp[-2].minor.yy0, 1);
}
break;
- case 175: /* setlist ::= nm EQ expr */
+ case 139: /* setlist ::= setlist COMMA LP idlist RP EQ expr */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy346.pExpr);
- sqlite3ExprListSetName(pParse, yygotominor.yy14, &yymsp[-2].minor.yy0, 1);
+ yymsp[-6].minor.yy322 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy322, yymsp[-3].minor.yy384, yymsp[0].minor.yy314);
}
break;
- case 176: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */
+ case 140: /* setlist ::= nm EQ expr */
{
- sqlite3WithPush(pParse, yymsp[-5].minor.yy59, 1);
- sqlite3Insert(pParse, yymsp[-2].minor.yy65, yymsp[0].minor.yy3, yymsp[-1].minor.yy408, yymsp[-4].minor.yy186);
+ yylhsminor.yy322 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy314);
+ sqlite3ExprListSetName(pParse, yylhsminor.yy322, &yymsp[-2].minor.yy0, 1);
}
+ yymsp[-2].minor.yy322 = yylhsminor.yy322;
break;
- case 177: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */
+ case 141: /* setlist ::= LP idlist RP EQ expr */
{
- sqlite3WithPush(pParse, yymsp[-6].minor.yy59, 1);
- sqlite3Insert(pParse, yymsp[-3].minor.yy65, 0, yymsp[-2].minor.yy408, yymsp[-5].minor.yy186);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy384, yymsp[0].minor.yy314);
}
break;
- case 178: /* insert_cmd ::= INSERT orconf */
-{yygotominor.yy186 = yymsp[0].minor.yy186;}
+ case 142: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */
+{
+ sqlite3WithPush(pParse, yymsp[-5].minor.yy451, 1);
+ sqlite3Insert(pParse, yymsp[-2].minor.yy259, yymsp[0].minor.yy387, yymsp[-1].minor.yy384, yymsp[-4].minor.yy4);
+}
break;
- case 179: /* insert_cmd ::= REPLACE */
-{yygotominor.yy186 = OE_Replace;}
+ case 143: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */
+{
+ sqlite3WithPush(pParse, yymsp[-6].minor.yy451, 1);
+ sqlite3Insert(pParse, yymsp[-3].minor.yy259, 0, yymsp[-2].minor.yy384, yymsp[-5].minor.yy4);
+}
break;
- case 182: /* idlist ::= idlist COMMA nm */
-{yygotominor.yy408 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy408,&yymsp[0].minor.yy0);}
+ case 147: /* idlist_opt ::= LP idlist RP */
+{yymsp[-2].minor.yy384 = yymsp[-1].minor.yy384;}
break;
- case 183: /* idlist ::= nm */
-{yygotominor.yy408 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0);}
+ case 148: /* idlist ::= idlist COMMA nm */
+{yymsp[-2].minor.yy384 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy384,&yymsp[0].minor.yy0);}
break;
- case 184: /* expr ::= term */
-{yygotominor.yy346 = yymsp[0].minor.yy346;}
+ case 149: /* idlist ::= nm */
+{yymsp[0].minor.yy384 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/}
break;
- case 185: /* expr ::= LP expr RP */
-{yygotominor.yy346.pExpr = yymsp[-1].minor.yy346.pExpr; spanSet(&yygotominor.yy346,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0);}
+ case 150: /* expr ::= LP expr RP */
+{yymsp[-2].minor.yy314 = yymsp[-1].minor.yy314;}
break;
- case 186: /* term ::= NULL */
- case 191: /* term ::= INTEGER|FLOAT|BLOB */ yytestcase(yyruleno==191);
- case 192: /* term ::= STRING */ yytestcase(yyruleno==192);
-{spanExpr(&yygotominor.yy346, pParse, yymsp[0].major, &yymsp[0].minor.yy0);}
+ case 151: /* expr ::= ID|INDEXED */
+ case 152: /* expr ::= JOIN_KW */ yytestcase(yyruleno==152);
+{yymsp[0].minor.yy314=tokenExpr(pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/}
break;
- case 187: /* expr ::= ID|INDEXED */
- case 188: /* expr ::= JOIN_KW */ yytestcase(yyruleno==188);
-{spanExpr(&yygotominor.yy346, pParse, TK_ID, &yymsp[0].minor.yy0);}
+ case 153: /* expr ::= nm DOT nm */
+{
+ Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1);
+ Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1);
+ yylhsminor.yy314 = sqlite3PExpr(pParse, TK_DOT, temp1, temp2);
+}
+ yymsp[-2].minor.yy314 = yylhsminor.yy314;
break;
- case 189: /* expr ::= nm DOT nm */
+ case 154: /* expr ::= nm DOT nm DOT nm */
{
- Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
- Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0);
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2, 0);
- spanSet(&yygotominor.yy346,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0);
+ Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-4].minor.yy0, 1);
+ Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1);
+ Expr *temp3 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1);
+ Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3);
+ yylhsminor.yy314 = sqlite3PExpr(pParse, TK_DOT, temp1, temp4);
}
+ yymsp[-4].minor.yy314 = yylhsminor.yy314;
+ break;
+ case 155: /* term ::= NULL|FLOAT|BLOB */
+ case 156: /* term ::= STRING */ yytestcase(yyruleno==156);
+{yymsp[0].minor.yy314=tokenExpr(pParse,yymsp[0].major,yymsp[0].minor.yy0); /*A-overwrites-X*/}
break;
- case 190: /* expr ::= nm DOT nm DOT nm */
+ case 157: /* term ::= INTEGER */
{
- Expr *temp1 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-4].minor.yy0);
- Expr *temp2 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[-2].minor.yy0);
- Expr *temp3 = sqlite3PExpr(pParse, TK_ID, 0, 0, &yymsp[0].minor.yy0);
- Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3, 0);
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4, 0);
- spanSet(&yygotominor.yy346,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0);
+ yylhsminor.yy314 = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1);
}
+ yymsp[0].minor.yy314 = yylhsminor.yy314;
break;
- case 193: /* expr ::= VARIABLE */
+ case 158: /* expr ::= VARIABLE */
{
- if( yymsp[0].minor.yy0.n>=2 && yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1]) ){
+ if( !(yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1])) ){
+ u32 n = yymsp[0].minor.yy0.n;
+ yymsp[0].minor.yy314 = tokenExpr(pParse, TK_VARIABLE, yymsp[0].minor.yy0);
+ sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy314, n);
+ }else{
/* When doing a nested parse, one can include terms in an expression
** that look like this: #1 #2 ... These terms refer to registers
** in the virtual machine. #N is the N-th register. */
+ Token t = yymsp[0].minor.yy0; /*A-overwrites-X*/
+ assert( t.n>=2 );
if( pParse->nested==0 ){
- sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &yymsp[0].minor.yy0);
- yygotominor.yy346.pExpr = 0;
+ sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &t);
+ yymsp[0].minor.yy314 = 0;
}else{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0, &yymsp[0].minor.yy0);
- if( yygotominor.yy346.pExpr ) sqlite3GetInt32(&yymsp[0].minor.yy0.z[1], &yygotominor.yy346.pExpr->iTable);
+ yymsp[0].minor.yy314 = sqlite3PExpr(pParse, TK_REGISTER, 0, 0);
+ if( yymsp[0].minor.yy314 ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy314->iTable);
}
- }else{
- spanExpr(&yygotominor.yy346, pParse, TK_VARIABLE, &yymsp[0].minor.yy0);
- sqlite3ExprAssignVarNumber(pParse, yygotominor.yy346.pExpr);
}
- spanSet(&yygotominor.yy346, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0);
}
break;
- case 194: /* expr ::= expr COLLATE ID|STRING */
+ case 159: /* expr ::= expr COLLATE ID|STRING */
{
- yygotominor.yy346.pExpr = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy346.pExpr, &yymsp[0].minor.yy0, 1);
- yygotominor.yy346.zStart = yymsp[-2].minor.yy346.zStart;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
+ yymsp[-2].minor.yy314 = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy314, &yymsp[0].minor.yy0, 1);
}
break;
- case 195: /* expr ::= CAST LP expr AS typetoken RP */
+ case 160: /* expr ::= CAST LP expr AS typetoken RP */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_CAST, yymsp[-3].minor.yy346.pExpr, 0, &yymsp[-1].minor.yy0);
- spanSet(&yygotominor.yy346,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0);
+ yymsp[-5].minor.yy314 = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1);
+ sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy314, yymsp[-3].minor.yy314, 0);
}
break;
- case 196: /* expr ::= ID|INDEXED LP distinct exprlist RP */
+ case 161: /* expr ::= ID|INDEXED LP distinct exprlist RP */
{
- if( yymsp[-1].minor.yy14 && yymsp[-1].minor.yy14->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){
+ if( yymsp[-1].minor.yy322 && yymsp[-1].minor.yy322->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){
sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0);
}
- yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy14, &yymsp[-4].minor.yy0);
- spanSet(&yygotominor.yy346,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0);
- if( yymsp[-2].minor.yy381==SF_Distinct && yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->flags |= EP_Distinct;
+ yylhsminor.yy314 = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy322, &yymsp[-4].minor.yy0);
+ if( yymsp[-2].minor.yy4==SF_Distinct && yylhsminor.yy314 ){
+ yylhsminor.yy314->flags |= EP_Distinct;
}
}
+ yymsp[-4].minor.yy314 = yylhsminor.yy314;
break;
- case 197: /* expr ::= ID|INDEXED LP STAR RP */
+ case 162: /* expr ::= ID|INDEXED LP STAR RP */
{
- yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0);
- spanSet(&yygotominor.yy346,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0);
+ yylhsminor.yy314 = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0);
}
+ yymsp[-3].minor.yy314 = yylhsminor.yy314;
break;
- case 198: /* term ::= CTIME_KW */
+ case 163: /* term ::= CTIME_KW */
{
- yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0);
- spanSet(&yygotominor.yy346, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0);
+ yylhsminor.yy314 = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0);
}
+ yymsp[0].minor.yy314 = yylhsminor.yy314;
break;
- case 199: /* expr ::= expr AND expr */
- case 200: /* expr ::= expr OR expr */ yytestcase(yyruleno==200);
- case 201: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==201);
- case 202: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==202);
- case 203: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==203);
- case 204: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==204);
- case 205: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==205);
- case 206: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==206);
-{spanBinaryExpr(&yygotominor.yy346,pParse,yymsp[-1].major,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy346);}
+ case 164: /* expr ::= LP nexprlist COMMA expr RP */
+{
+ ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy322, yymsp[-1].minor.yy314);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_VECTOR, 0, 0);
+ if( yymsp[-4].minor.yy314 ){
+ yymsp[-4].minor.yy314->x.pList = pList;
+ }else{
+ sqlite3ExprListDelete(pParse->db, pList);
+ }
+}
break;
- case 207: /* likeop ::= LIKE_KW|MATCH */
-{yygotominor.yy96.eOperator = yymsp[0].minor.yy0; yygotominor.yy96.bNot = 0;}
+ case 165: /* expr ::= expr AND expr */
+ case 166: /* expr ::= expr OR expr */ yytestcase(yyruleno==166);
+ case 167: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==167);
+ case 168: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==168);
+ case 169: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==169);
+ case 170: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==170);
+ case 171: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==171);
+ case 172: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==172);
+{yymsp[-2].minor.yy314=sqlite3PExpr(pParse,yymsp[-1].major,yymsp[-2].minor.yy314,yymsp[0].minor.yy314);}
break;
- case 208: /* likeop ::= NOT LIKE_KW|MATCH */
-{yygotominor.yy96.eOperator = yymsp[0].minor.yy0; yygotominor.yy96.bNot = 1;}
+ case 173: /* likeop ::= NOT LIKE_KW|MATCH */
+{yymsp[-1].minor.yy0=yymsp[0].minor.yy0; yymsp[-1].minor.yy0.n|=0x80000000; /*yymsp[-1].minor.yy0-overwrite-yymsp[0].minor.yy0*/}
break;
- case 209: /* expr ::= expr likeop expr */
+ case 174: /* expr ::= expr likeop expr */
{
ExprList *pList;
- pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy346.pExpr);
- pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy346.pExpr);
- yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy96.eOperator);
- if( yymsp[-1].minor.yy96.bNot ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
- yygotominor.yy346.zStart = yymsp[-2].minor.yy346.zStart;
- yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd;
- if( yygotominor.yy346.pExpr ) yygotominor.yy346.pExpr->flags |= EP_InfixFunc;
+ int bNot = yymsp[-1].minor.yy0.n & 0x80000000;
+ yymsp[-1].minor.yy0.n &= 0x7fffffff;
+ pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy314);
+ pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy314);
+ yymsp[-2].minor.yy314 = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0);
+ if( bNot ) yymsp[-2].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-2].minor.yy314, 0);
+ if( yymsp[-2].minor.yy314 ) yymsp[-2].minor.yy314->flags |= EP_InfixFunc;
}
break;
- case 210: /* expr ::= expr likeop expr ESCAPE expr */
+ case 175: /* expr ::= expr likeop expr ESCAPE expr */
{
ExprList *pList;
- pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr);
- pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy346.pExpr);
- pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy346.pExpr);
- yygotominor.yy346.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy96.eOperator);
- if( yymsp[-3].minor.yy96.bNot ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
- yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart;
- yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd;
- if( yygotominor.yy346.pExpr ) yygotominor.yy346.pExpr->flags |= EP_InfixFunc;
+ int bNot = yymsp[-3].minor.yy0.n & 0x80000000;
+ yymsp[-3].minor.yy0.n &= 0x7fffffff;
+ pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy314);
+ pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy314);
+ pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy314);
+ yymsp[-4].minor.yy314 = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0);
+ if( bNot ) yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy314, 0);
+ if( yymsp[-4].minor.yy314 ) yymsp[-4].minor.yy314->flags |= EP_InfixFunc;
}
break;
- case 211: /* expr ::= expr ISNULL|NOTNULL */
-{spanUnaryPostfix(&yygotominor.yy346,pParse,yymsp[0].major,&yymsp[-1].minor.yy346,&yymsp[0].minor.yy0);}
+ case 176: /* expr ::= expr ISNULL|NOTNULL */
+{yymsp[-1].minor.yy314 = sqlite3PExpr(pParse,yymsp[0].major,yymsp[-1].minor.yy314,0);}
break;
- case 212: /* expr ::= expr NOT NULL */
-{spanUnaryPostfix(&yygotominor.yy346,pParse,TK_NOTNULL,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy0);}
+ case 177: /* expr ::= expr NOT NULL */
+{yymsp[-2].minor.yy314 = sqlite3PExpr(pParse,TK_NOTNULL,yymsp[-2].minor.yy314,0);}
break;
- case 213: /* expr ::= expr IS expr */
+ case 178: /* expr ::= expr IS expr */
{
- spanBinaryExpr(&yygotominor.yy346,pParse,TK_IS,&yymsp[-2].minor.yy346,&yymsp[0].minor.yy346);
- binaryToUnaryIfNull(pParse, yymsp[0].minor.yy346.pExpr, yygotominor.yy346.pExpr, TK_ISNULL);
+ yymsp[-2].minor.yy314 = sqlite3PExpr(pParse,TK_IS,yymsp[-2].minor.yy314,yymsp[0].minor.yy314);
+ binaryToUnaryIfNull(pParse, yymsp[0].minor.yy314, yymsp[-2].minor.yy314, TK_ISNULL);
}
break;
- case 214: /* expr ::= expr IS NOT expr */
+ case 179: /* expr ::= expr IS NOT expr */
{
- spanBinaryExpr(&yygotominor.yy346,pParse,TK_ISNOT,&yymsp[-3].minor.yy346,&yymsp[0].minor.yy346);
- binaryToUnaryIfNull(pParse, yymsp[0].minor.yy346.pExpr, yygotominor.yy346.pExpr, TK_NOTNULL);
+ yymsp[-3].minor.yy314 = sqlite3PExpr(pParse,TK_ISNOT,yymsp[-3].minor.yy314,yymsp[0].minor.yy314);
+ binaryToUnaryIfNull(pParse, yymsp[0].minor.yy314, yymsp[-3].minor.yy314, TK_NOTNULL);
}
break;
- case 215: /* expr ::= NOT expr */
- case 216: /* expr ::= BITNOT expr */ yytestcase(yyruleno==216);
-{spanUnaryPrefix(&yygotominor.yy346,pParse,yymsp[-1].major,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);}
+ case 180: /* expr ::= NOT expr */
+ case 181: /* expr ::= BITNOT expr */ yytestcase(yyruleno==181);
+{yymsp[-1].minor.yy314 = sqlite3PExpr(pParse, yymsp[-1].major, yymsp[0].minor.yy314, 0);/*A-overwrites-B*/}
+ break;
+ case 182: /* expr ::= MINUS expr */
+{yymsp[-1].minor.yy314 = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy314, 0);}
break;
- case 217: /* expr ::= MINUS expr */
-{spanUnaryPrefix(&yygotominor.yy346,pParse,TK_UMINUS,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);}
+ case 183: /* expr ::= PLUS expr */
+{yymsp[-1].minor.yy314 = sqlite3PExpr(pParse, TK_UPLUS, yymsp[0].minor.yy314, 0);}
break;
- case 218: /* expr ::= PLUS expr */
-{spanUnaryPrefix(&yygotominor.yy346,pParse,TK_UPLUS,&yymsp[0].minor.yy346,&yymsp[-1].minor.yy0);}
+ case 184: /* between_op ::= BETWEEN */
+ case 187: /* in_op ::= IN */ yytestcase(yyruleno==187);
+{yymsp[0].minor.yy4 = 0;}
break;
- case 221: /* expr ::= expr between_op expr AND expr */
+ case 186: /* expr ::= expr between_op expr AND expr */
{
- ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr);
- pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy346.pExpr);
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy346.pExpr, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pList = pList;
+ ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy314);
+ pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy314);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy314, 0);
+ if( yymsp[-4].minor.yy314 ){
+ yymsp[-4].minor.yy314->x.pList = pList;
}else{
sqlite3ExprListDelete(pParse->db, pList);
}
- if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
- yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart;
- yygotominor.yy346.zEnd = yymsp[0].minor.yy346.zEnd;
+ if( yymsp[-3].minor.yy4 ) yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy314, 0);
}
break;
- case 224: /* expr ::= expr in_op LP exprlist RP */
+ case 189: /* expr ::= expr in_op LP exprlist RP */
{
- if( yymsp[-1].minor.yy14==0 ){
+ if( yymsp[-1].minor.yy322==0 ){
/* Expressions of the form
**
** expr1 IN ()
** simplify to constants 0 (false) and 1 (true), respectively,
** regardless of the value of expr1.
*/
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_INTEGER, 0, 0, &sqlite3IntTokens[yymsp[-3].minor.yy328]);
- sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy346.pExpr);
- }else if( yymsp[-1].minor.yy14->nExpr==1 ){
+ sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy314);
+ yymsp[-4].minor.yy314 = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy4],1);
+ }else if( yymsp[-1].minor.yy322->nExpr==1 ){
/* Expressions of the form:
**
** expr1 IN (?1)
** affinity or the collating sequence to use for comparison. Otherwise,
** the semantics would be subtly different from IN or NOT IN.
*/
- Expr *pRHS = yymsp[-1].minor.yy14->a[0].pExpr;
- yymsp[-1].minor.yy14->a[0].pExpr = 0;
- sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14);
+ Expr *pRHS = yymsp[-1].minor.yy322->a[0].pExpr;
+ yymsp[-1].minor.yy322->a[0].pExpr = 0;
+ sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy322);
/* pRHS cannot be NULL because a malloc error would have been detected
** before now and control would have never reached this point */
if( ALWAYS(pRHS) ){
pRHS->flags &= ~EP_Collate;
pRHS->flags |= EP_Generic;
}
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy328 ? TK_NE : TK_EQ, yymsp[-4].minor.yy346.pExpr, pRHS, 0);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, yymsp[-3].minor.yy4 ? TK_NE : TK_EQ, yymsp[-4].minor.yy314, pRHS);
}else{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy346.pExpr, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pList = yymsp[-1].minor.yy14;
- sqlite3ExprSetHeightAndFlags(pParse, yygotominor.yy346.pExpr);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy314, 0);
+ if( yymsp[-4].minor.yy314 ){
+ yymsp[-4].minor.yy314->x.pList = yymsp[-1].minor.yy322;
+ sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy314);
}else{
- sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy14);
+ sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy322);
}
- if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
+ if( yymsp[-3].minor.yy4 ) yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy314, 0);
}
- yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
}
break;
- case 225: /* expr ::= LP select RP */
+ case 190: /* expr ::= LP select RP */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pSelect = yymsp[-1].minor.yy3;
- ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect|EP_Subquery);
- sqlite3ExprSetHeightAndFlags(pParse, yygotominor.yy346.pExpr);
- }else{
- sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3);
- }
- yygotominor.yy346.zStart = yymsp[-2].minor.yy0.z;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
+ yymsp[-2].minor.yy314 = sqlite3PExpr(pParse, TK_SELECT, 0, 0);
+ sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy314, yymsp[-1].minor.yy387);
}
break;
- case 226: /* expr ::= expr in_op LP select RP */
+ case 191: /* expr ::= expr in_op LP select RP */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy346.pExpr, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pSelect = yymsp[-1].minor.yy3;
- ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect|EP_Subquery);
- sqlite3ExprSetHeightAndFlags(pParse, yygotominor.yy346.pExpr);
- }else{
- sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3);
- }
- if( yymsp[-3].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
- yygotominor.yy346.zStart = yymsp[-4].minor.yy346.zStart;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy314, 0);
+ sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy314, yymsp[-1].minor.yy387);
+ if( yymsp[-3].minor.yy4 ) yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy314, 0);
}
break;
- case 227: /* expr ::= expr in_op nm dbnm */
+ case 192: /* expr ::= expr in_op nm dbnm paren_exprlist */
{
- SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-3].minor.yy346.pExpr, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0);
- ExprSetProperty(yygotominor.yy346.pExpr, EP_xIsSelect|EP_Subquery);
- sqlite3ExprSetHeightAndFlags(pParse, yygotominor.yy346.pExpr);
- }else{
- sqlite3SrcListDelete(pParse->db, pSrc);
- }
- if( yymsp[-2].minor.yy328 ) yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_NOT, yygotominor.yy346.pExpr, 0, 0);
- yygotominor.yy346.zStart = yymsp[-3].minor.yy346.zStart;
- yygotominor.yy346.zEnd = yymsp[0].minor.yy0.z ? &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] : &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n];
+ SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);
+ Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0);
+ if( yymsp[0].minor.yy322 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy322);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy314, 0);
+ sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy314, pSelect);
+ if( yymsp[-3].minor.yy4 ) yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy314, 0);
}
break;
- case 228: /* expr ::= EXISTS LP select RP */
+ case 193: /* expr ::= EXISTS LP select RP */
{
- Expr *p = yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0, 0);
- if( p ){
- p->x.pSelect = yymsp[-1].minor.yy3;
- ExprSetProperty(p, EP_xIsSelect|EP_Subquery);
- sqlite3ExprSetHeightAndFlags(pParse, p);
- }else{
- sqlite3SelectDelete(pParse->db, yymsp[-1].minor.yy3);
- }
- yygotominor.yy346.zStart = yymsp[-3].minor.yy0.z;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
+ Expr *p;
+ p = yymsp[-3].minor.yy314 = sqlite3PExpr(pParse, TK_EXISTS, 0, 0);
+ sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy387);
}
break;
- case 229: /* expr ::= CASE case_operand case_exprlist case_else END */
+ case 194: /* expr ::= CASE case_operand case_exprlist case_else END */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy132, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->x.pList = yymsp[-1].minor.yy132 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy14,yymsp[-1].minor.yy132) : yymsp[-2].minor.yy14;
- sqlite3ExprSetHeightAndFlags(pParse, yygotominor.yy346.pExpr);
+ yymsp[-4].minor.yy314 = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy314, 0);
+ if( yymsp[-4].minor.yy314 ){
+ yymsp[-4].minor.yy314->x.pList = yymsp[-1].minor.yy314 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy322,yymsp[-1].minor.yy314) : yymsp[-2].minor.yy322;
+ sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy314);
}else{
- sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy14);
- sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy132);
+ sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy322);
+ sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy314);
}
- yygotominor.yy346.zStart = yymsp[-4].minor.yy0.z;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
}
break;
- case 230: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */
+ case 195: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy14, yymsp[-2].minor.yy346.pExpr);
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,yygotominor.yy14, yymsp[0].minor.yy346.pExpr);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy322, yymsp[-2].minor.yy314);
+ yymsp[-4].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy322, yymsp[0].minor.yy314);
}
break;
- case 231: /* case_exprlist ::= WHEN expr THEN expr */
+ case 196: /* case_exprlist ::= WHEN expr THEN expr */
{
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy346.pExpr);
- yygotominor.yy14 = sqlite3ExprListAppend(pParse,yygotominor.yy14, yymsp[0].minor.yy346.pExpr);
+ yymsp[-3].minor.yy322 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy314);
+ yymsp[-3].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy322, yymsp[0].minor.yy314);
}
break;
- case 238: /* nexprlist ::= nexprlist COMMA expr */
-{yygotominor.yy14 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy14,yymsp[0].minor.yy346.pExpr);}
+ case 199: /* case_operand ::= expr */
+{yymsp[0].minor.yy314 = yymsp[0].minor.yy314; /*A-overwrites-X*/}
break;
- case 239: /* nexprlist ::= expr */
-{yygotominor.yy14 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy346.pExpr);}
+ case 202: /* nexprlist ::= nexprlist COMMA expr */
+{yymsp[-2].minor.yy322 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy322,yymsp[0].minor.yy314);}
break;
- case 240: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */
+ case 203: /* nexprlist ::= expr */
+{yymsp[0].minor.yy322 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy314); /*A-overwrites-Y*/}
+ break;
+ case 205: /* paren_exprlist ::= LP exprlist RP */
+ case 210: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==210);
+{yymsp[-2].minor.yy322 = yymsp[-1].minor.yy322;}
+ break;
+ case 206: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */
{
sqlite3CreateIndex(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0,
- sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy14, yymsp[-10].minor.yy328,
- &yymsp[-11].minor.yy0, yymsp[0].minor.yy132, SQLITE_SO_ASC, yymsp[-8].minor.yy328);
+ sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy322, yymsp[-10].minor.yy4,
+ &yymsp[-11].minor.yy0, yymsp[0].minor.yy314, SQLITE_SO_ASC, yymsp[-8].minor.yy4, SQLITE_IDXTYPE_APPDEF);
}
break;
- case 241: /* uniqueflag ::= UNIQUE */
- case 292: /* raisetype ::= ABORT */ yytestcase(yyruleno==292);
-{yygotominor.yy328 = OE_Abort;}
+ case 207: /* uniqueflag ::= UNIQUE */
+ case 247: /* raisetype ::= ABORT */ yytestcase(yyruleno==247);
+{yymsp[0].minor.yy4 = OE_Abort;}
break;
- case 242: /* uniqueflag ::= */
-{yygotominor.yy328 = OE_None;}
+ case 208: /* uniqueflag ::= */
+{yymsp[1].minor.yy4 = OE_None;}
break;
- case 245: /* eidlist ::= eidlist COMMA nm collate sortorder */
+ case 211: /* eidlist ::= eidlist COMMA nm collate sortorder */
{
- yygotominor.yy14 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy14, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy328, yymsp[0].minor.yy328);
+ yymsp[-4].minor.yy322 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy322, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy4, yymsp[0].minor.yy4);
}
break;
- case 246: /* eidlist ::= nm collate sortorder */
+ case 212: /* eidlist ::= nm collate sortorder */
{
- yygotominor.yy14 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy328, yymsp[0].minor.yy328);
+ yymsp[-2].minor.yy322 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy4, yymsp[0].minor.yy4); /*A-overwrites-Y*/
}
break;
- case 249: /* cmd ::= DROP INDEX ifexists fullname */
-{sqlite3DropIndex(pParse, yymsp[0].minor.yy65, yymsp[-1].minor.yy328);}
+ case 215: /* cmd ::= DROP INDEX ifexists fullname */
+{sqlite3DropIndex(pParse, yymsp[0].minor.yy259, yymsp[-1].minor.yy4);}
break;
- case 250: /* cmd ::= VACUUM */
- case 251: /* cmd ::= VACUUM nm */ yytestcase(yyruleno==251);
-{sqlite3Vacuum(pParse);}
+ case 216: /* cmd ::= VACUUM */
+{sqlite3Vacuum(pParse,0);}
break;
- case 252: /* cmd ::= PRAGMA nm dbnm */
+ case 217: /* cmd ::= VACUUM nm */
+{sqlite3Vacuum(pParse,&yymsp[0].minor.yy0);}
+ break;
+ case 218: /* cmd ::= PRAGMA nm dbnm */
{sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);}
break;
- case 253: /* cmd ::= PRAGMA nm dbnm EQ nmnum */
+ case 219: /* cmd ::= PRAGMA nm dbnm EQ nmnum */
{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);}
break;
- case 254: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */
+ case 220: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */
{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);}
break;
- case 255: /* cmd ::= PRAGMA nm dbnm EQ minus_num */
+ case 221: /* cmd ::= PRAGMA nm dbnm EQ minus_num */
{sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);}
break;
- case 256: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */
+ case 222: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */
{sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);}
break;
- case 265: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */
+ case 225: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */
{
Token all;
all.z = yymsp[-3].minor.yy0.z;
all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n;
- sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy473, &all);
+ sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy203, &all);
}
break;
- case 266: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */
+ case 226: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */
{
- sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy328, yymsp[-4].minor.yy378.a, yymsp[-4].minor.yy378.b, yymsp[-2].minor.yy65, yymsp[0].minor.yy132, yymsp[-10].minor.yy328, yymsp[-8].minor.yy328);
- yygotominor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0);
+ sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy4, yymsp[-4].minor.yy90.a, yymsp[-4].minor.yy90.b, yymsp[-2].minor.yy259, yymsp[0].minor.yy314, yymsp[-10].minor.yy4, yymsp[-8].minor.yy4);
+ yymsp[-10].minor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); /*A-overwrites-T*/
}
break;
- case 267: /* trigger_time ::= BEFORE */
- case 270: /* trigger_time ::= */ yytestcase(yyruleno==270);
-{ yygotominor.yy328 = TK_BEFORE; }
+ case 227: /* trigger_time ::= BEFORE|AFTER */
+{ yymsp[0].minor.yy4 = yymsp[0].major; /*A-overwrites-X*/ }
break;
- case 268: /* trigger_time ::= AFTER */
-{ yygotominor.yy328 = TK_AFTER; }
+ case 228: /* trigger_time ::= INSTEAD OF */
+{ yymsp[-1].minor.yy4 = TK_INSTEAD;}
break;
- case 269: /* trigger_time ::= INSTEAD OF */
-{ yygotominor.yy328 = TK_INSTEAD;}
+ case 229: /* trigger_time ::= */
+{ yymsp[1].minor.yy4 = TK_BEFORE; }
break;
- case 271: /* trigger_event ::= DELETE|INSERT */
- case 272: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==272);
-{yygotominor.yy378.a = yymsp[0].major; yygotominor.yy378.b = 0;}
+ case 230: /* trigger_event ::= DELETE|INSERT */
+ case 231: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==231);
+{yymsp[0].minor.yy90.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy90.b = 0;}
break;
- case 273: /* trigger_event ::= UPDATE OF idlist */
-{yygotominor.yy378.a = TK_UPDATE; yygotominor.yy378.b = yymsp[0].minor.yy408;}
+ case 232: /* trigger_event ::= UPDATE OF idlist */
+{yymsp[-2].minor.yy90.a = TK_UPDATE; yymsp[-2].minor.yy90.b = yymsp[0].minor.yy384;}
break;
- case 276: /* when_clause ::= */
- case 297: /* key_opt ::= */ yytestcase(yyruleno==297);
-{ yygotominor.yy132 = 0; }
+ case 233: /* when_clause ::= */
+ case 252: /* key_opt ::= */ yytestcase(yyruleno==252);
+{ yymsp[1].minor.yy314 = 0; }
break;
- case 277: /* when_clause ::= WHEN expr */
- case 298: /* key_opt ::= KEY expr */ yytestcase(yyruleno==298);
-{ yygotominor.yy132 = yymsp[0].minor.yy346.pExpr; }
+ case 234: /* when_clause ::= WHEN expr */
+ case 253: /* key_opt ::= KEY expr */ yytestcase(yyruleno==253);
+{ yymsp[-1].minor.yy314 = yymsp[0].minor.yy314; }
break;
- case 278: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */
+ case 235: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */
{
- assert( yymsp[-2].minor.yy473!=0 );
- yymsp[-2].minor.yy473->pLast->pNext = yymsp[-1].minor.yy473;
- yymsp[-2].minor.yy473->pLast = yymsp[-1].minor.yy473;
- yygotominor.yy473 = yymsp[-2].minor.yy473;
+ assert( yymsp[-2].minor.yy203!=0 );
+ yymsp[-2].minor.yy203->pLast->pNext = yymsp[-1].minor.yy203;
+ yymsp[-2].minor.yy203->pLast = yymsp[-1].minor.yy203;
}
break;
- case 279: /* trigger_cmd_list ::= trigger_cmd SEMI */
+ case 236: /* trigger_cmd_list ::= trigger_cmd SEMI */
{
- assert( yymsp[-1].minor.yy473!=0 );
- yymsp[-1].minor.yy473->pLast = yymsp[-1].minor.yy473;
- yygotominor.yy473 = yymsp[-1].minor.yy473;
+ assert( yymsp[-1].minor.yy203!=0 );
+ yymsp[-1].minor.yy203->pLast = yymsp[-1].minor.yy203;
}
break;
- case 281: /* trnm ::= nm DOT nm */
+ case 237: /* trnm ::= nm DOT nm */
{
- yygotominor.yy0 = yymsp[0].minor.yy0;
+ yymsp[-2].minor.yy0 = yymsp[0].minor.yy0;
sqlite3ErrorMsg(pParse,
"qualified table names are not allowed on INSERT, UPDATE, and DELETE "
"statements within triggers");
}
break;
- case 283: /* tridxby ::= INDEXED BY nm */
+ case 238: /* tridxby ::= INDEXED BY nm */
{
sqlite3ErrorMsg(pParse,
"the INDEXED BY clause is not allowed on UPDATE or DELETE statements "
"within triggers");
}
break;
- case 284: /* tridxby ::= NOT INDEXED */
+ case 239: /* tridxby ::= NOT INDEXED */
{
sqlite3ErrorMsg(pParse,
"the NOT INDEXED clause is not allowed on UPDATE or DELETE statements "
"within triggers");
}
break;
- case 285: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */
-{ yygotominor.yy473 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy14, yymsp[0].minor.yy132, yymsp[-5].minor.yy186); }
+ case 240: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */
+{yylhsminor.yy203 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-5].minor.yy0, yymsp[-2].minor.yy322, yymsp[-1].minor.yy314, yymsp[-6].minor.yy4, yymsp[-7].minor.yy0.z, yymsp[0].minor.yy336);}
+ yymsp[-7].minor.yy203 = yylhsminor.yy203;
break;
- case 286: /* trigger_cmd ::= insert_cmd INTO trnm idlist_opt select */
-{yygotominor.yy473 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy408, yymsp[0].minor.yy3, yymsp[-4].minor.yy186);}
+ case 241: /* trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select scanpt */
+{yylhsminor.yy203 = sqlite3TriggerInsertStep(pParse->db,&yymsp[-3].minor.yy0,yymsp[-2].minor.yy384,yymsp[-1].minor.yy387,yymsp[-5].minor.yy4,yymsp[-6].minor.yy336,yymsp[0].minor.yy336);/*yylhsminor.yy203-overwrites-yymsp[-5].minor.yy4*/}
+ yymsp[-6].minor.yy203 = yylhsminor.yy203;
break;
- case 287: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */
-{yygotominor.yy473 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy132);}
+ case 242: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */
+{yylhsminor.yy203 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-3].minor.yy0, yymsp[-1].minor.yy314, yymsp[-5].minor.yy0.z, yymsp[0].minor.yy336);}
+ yymsp[-5].minor.yy203 = yylhsminor.yy203;
break;
- case 288: /* trigger_cmd ::= select */
-{yygotominor.yy473 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy3); }
+ case 243: /* trigger_cmd ::= scanpt select scanpt */
+{yylhsminor.yy203 = sqlite3TriggerSelectStep(pParse->db, yymsp[-1].minor.yy387, yymsp[-2].minor.yy336, yymsp[0].minor.yy336); /*yylhsminor.yy203-overwrites-yymsp[-1].minor.yy387*/}
+ yymsp[-2].minor.yy203 = yylhsminor.yy203;
break;
- case 289: /* expr ::= RAISE LP IGNORE RP */
+ case 244: /* expr ::= RAISE LP IGNORE RP */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, 0);
- if( yygotominor.yy346.pExpr ){
- yygotominor.yy346.pExpr->affinity = OE_Ignore;
+ yymsp[-3].minor.yy314 = sqlite3PExpr(pParse, TK_RAISE, 0, 0);
+ if( yymsp[-3].minor.yy314 ){
+ yymsp[-3].minor.yy314->affinity = OE_Ignore;
}
- yygotominor.yy346.zStart = yymsp[-3].minor.yy0.z;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
}
break;
- case 290: /* expr ::= RAISE LP raisetype COMMA nm RP */
+ case 245: /* expr ::= RAISE LP raisetype COMMA nm RP */
{
- yygotominor.yy346.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0, &yymsp[-1].minor.yy0);
- if( yygotominor.yy346.pExpr ) {
- yygotominor.yy346.pExpr->affinity = (char)yymsp[-3].minor.yy328;
+ yymsp[-5].minor.yy314 = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1);
+ if( yymsp[-5].minor.yy314 ) {
+ yymsp[-5].minor.yy314->affinity = (char)yymsp[-3].minor.yy4;
}
- yygotominor.yy346.zStart = yymsp[-5].minor.yy0.z;
- yygotominor.yy346.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n];
}
break;
- case 291: /* raisetype ::= ROLLBACK */
-{yygotominor.yy328 = OE_Rollback;}
+ case 246: /* raisetype ::= ROLLBACK */
+{yymsp[0].minor.yy4 = OE_Rollback;}
break;
- case 293: /* raisetype ::= FAIL */
-{yygotominor.yy328 = OE_Fail;}
+ case 248: /* raisetype ::= FAIL */
+{yymsp[0].minor.yy4 = OE_Fail;}
break;
- case 294: /* cmd ::= DROP TRIGGER ifexists fullname */
+ case 249: /* cmd ::= DROP TRIGGER ifexists fullname */
{
- sqlite3DropTrigger(pParse,yymsp[0].minor.yy65,yymsp[-1].minor.yy328);
+ sqlite3DropTrigger(pParse,yymsp[0].minor.yy259,yymsp[-1].minor.yy4);
}
break;
- case 295: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */
+ case 250: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */
{
- sqlite3Attach(pParse, yymsp[-3].minor.yy346.pExpr, yymsp[-1].minor.yy346.pExpr, yymsp[0].minor.yy132);
+ sqlite3Attach(pParse, yymsp[-3].minor.yy314, yymsp[-1].minor.yy314, yymsp[0].minor.yy314);
}
break;
- case 296: /* cmd ::= DETACH database_kw_opt expr */
+ case 251: /* cmd ::= DETACH database_kw_opt expr */
{
- sqlite3Detach(pParse, yymsp[0].minor.yy346.pExpr);
+ sqlite3Detach(pParse, yymsp[0].minor.yy314);
}
break;
- case 301: /* cmd ::= REINDEX */
+ case 254: /* cmd ::= REINDEX */
{sqlite3Reindex(pParse, 0, 0);}
break;
- case 302: /* cmd ::= REINDEX nm dbnm */
+ case 255: /* cmd ::= REINDEX nm dbnm */
{sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);}
break;
- case 303: /* cmd ::= ANALYZE */
+ case 256: /* cmd ::= ANALYZE */
{sqlite3Analyze(pParse, 0, 0);}
break;
- case 304: /* cmd ::= ANALYZE nm dbnm */
+ case 257: /* cmd ::= ANALYZE nm dbnm */
{sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);}
break;
- case 305: /* cmd ::= ALTER TABLE fullname RENAME TO nm */
+ case 258: /* cmd ::= ALTER TABLE fullname RENAME TO nm */
{
- sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy65,&yymsp[0].minor.yy0);
+ sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy259,&yymsp[0].minor.yy0);
}
break;
- case 306: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt column */
+ case 259: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */
{
- sqlite3AlterFinishAddColumn(pParse, &yymsp[0].minor.yy0);
+ yymsp[-1].minor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-1].minor.yy0.z) + pParse->sLastToken.n;
+ sqlite3AlterFinishAddColumn(pParse, &yymsp[-1].minor.yy0);
}
break;
- case 307: /* add_column_fullname ::= fullname */
+ case 260: /* add_column_fullname ::= fullname */
{
- pParse->db->lookaside.bEnabled = 0;
- sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy65);
+ disableLookaside(pParse);
+ sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy259);
}
break;
- case 310: /* cmd ::= create_vtab */
+ case 261: /* cmd ::= create_vtab */
{sqlite3VtabFinishParse(pParse,0);}
break;
- case 311: /* cmd ::= create_vtab LP vtabarglist RP */
+ case 262: /* cmd ::= create_vtab LP vtabarglist RP */
{sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);}
break;
- case 312: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */
+ case 263: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */
{
- sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy328);
+ sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy4);
}
break;
- case 315: /* vtabarg ::= */
+ case 264: /* vtabarg ::= */
{sqlite3VtabArgInit(pParse);}
break;
- case 317: /* vtabargtoken ::= ANY */
- case 318: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==318);
- case 319: /* lp ::= LP */ yytestcase(yyruleno==319);
+ case 265: /* vtabargtoken ::= ANY */
+ case 266: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==266);
+ case 267: /* lp ::= LP */ yytestcase(yyruleno==267);
{sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);}
break;
- case 323: /* with ::= */
-{yygotominor.yy59 = 0;}
+ case 268: /* with ::= */
+{yymsp[1].minor.yy451 = 0;}
+ break;
+ case 269: /* with ::= WITH wqlist */
+{ yymsp[-1].minor.yy451 = yymsp[0].minor.yy451; }
break;
- case 324: /* with ::= WITH wqlist */
- case 325: /* with ::= WITH RECURSIVE wqlist */ yytestcase(yyruleno==325);
-{ yygotominor.yy59 = yymsp[0].minor.yy59; }
+ case 270: /* with ::= WITH RECURSIVE wqlist */
+{ yymsp[-2].minor.yy451 = yymsp[0].minor.yy451; }
break;
- case 326: /* wqlist ::= nm eidlist_opt AS LP select RP */
+ case 271: /* wqlist ::= nm eidlist_opt AS LP select RP */
{
- yygotominor.yy59 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy14, yymsp[-1].minor.yy3);
+ yymsp[-5].minor.yy451 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy322, yymsp[-1].minor.yy387); /*A-overwrites-X*/
}
break;
- case 327: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */
+ case 272: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */
{
- yygotominor.yy59 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy59, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy14, yymsp[-1].minor.yy3);
+ yymsp[-7].minor.yy451 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy451, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy322, yymsp[-1].minor.yy387);
}
break;
default:
- /* (0) input ::= cmdlist */ yytestcase(yyruleno==0);
- /* (1) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==1);
- /* (2) cmdlist ::= ecmd */ yytestcase(yyruleno==2);
- /* (3) ecmd ::= SEMI */ yytestcase(yyruleno==3);
- /* (4) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==4);
- /* (10) trans_opt ::= */ yytestcase(yyruleno==10);
- /* (11) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==11);
- /* (12) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==12);
- /* (20) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==20);
- /* (21) savepoint_opt ::= */ yytestcase(yyruleno==21);
- /* (25) cmd ::= create_table create_table_args */ yytestcase(yyruleno==25);
- /* (36) columnlist ::= columnlist COMMA column */ yytestcase(yyruleno==36);
- /* (37) columnlist ::= column */ yytestcase(yyruleno==37);
- /* (43) type ::= */ yytestcase(yyruleno==43);
- /* (50) signed ::= plus_num */ yytestcase(yyruleno==50);
- /* (51) signed ::= minus_num */ yytestcase(yyruleno==51);
- /* (52) carglist ::= carglist ccons */ yytestcase(yyruleno==52);
- /* (53) carglist ::= */ yytestcase(yyruleno==53);
- /* (60) ccons ::= NULL onconf */ yytestcase(yyruleno==60);
- /* (88) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==88);
- /* (89) conslist ::= tcons */ yytestcase(yyruleno==89);
- /* (91) tconscomma ::= */ yytestcase(yyruleno==91);
- /* (274) foreach_clause ::= */ yytestcase(yyruleno==274);
- /* (275) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==275);
- /* (282) tridxby ::= */ yytestcase(yyruleno==282);
- /* (299) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==299);
- /* (300) database_kw_opt ::= */ yytestcase(yyruleno==300);
- /* (308) kwcolumn_opt ::= */ yytestcase(yyruleno==308);
- /* (309) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==309);
- /* (313) vtabarglist ::= vtabarg */ yytestcase(yyruleno==313);
- /* (314) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==314);
- /* (316) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==316);
- /* (320) anylist ::= */ yytestcase(yyruleno==320);
- /* (321) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==321);
- /* (322) anylist ::= anylist ANY */ yytestcase(yyruleno==322);
+ /* (273) input ::= cmdlist */ yytestcase(yyruleno==273);
+ /* (274) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==274);
+ /* (275) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=275);
+ /* (276) ecmd ::= SEMI */ yytestcase(yyruleno==276);
+ /* (277) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==277);
+ /* (278) explain ::= */ yytestcase(yyruleno==278);
+ /* (279) trans_opt ::= */ yytestcase(yyruleno==279);
+ /* (280) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==280);
+ /* (281) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==281);
+ /* (282) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==282);
+ /* (283) savepoint_opt ::= */ yytestcase(yyruleno==283);
+ /* (284) cmd ::= create_table create_table_args */ yytestcase(yyruleno==284);
+ /* (285) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==285);
+ /* (286) columnlist ::= columnname carglist */ yytestcase(yyruleno==286);
+ /* (287) nm ::= ID|INDEXED */ yytestcase(yyruleno==287);
+ /* (288) nm ::= STRING */ yytestcase(yyruleno==288);
+ /* (289) nm ::= JOIN_KW */ yytestcase(yyruleno==289);
+ /* (290) typetoken ::= typename */ yytestcase(yyruleno==290);
+ /* (291) typename ::= ID|STRING */ yytestcase(yyruleno==291);
+ /* (292) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=292);
+ /* (293) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=293);
+ /* (294) carglist ::= carglist ccons */ yytestcase(yyruleno==294);
+ /* (295) carglist ::= */ yytestcase(yyruleno==295);
+ /* (296) ccons ::= NULL onconf */ yytestcase(yyruleno==296);
+ /* (297) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==297);
+ /* (298) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==298);
+ /* (299) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=299);
+ /* (300) tconscomma ::= */ yytestcase(yyruleno==300);
+ /* (301) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=301);
+ /* (302) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=302);
+ /* (303) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=303);
+ /* (304) oneselect ::= values */ yytestcase(yyruleno==304);
+ /* (305) sclp ::= selcollist COMMA */ yytestcase(yyruleno==305);
+ /* (306) as ::= ID|STRING */ yytestcase(yyruleno==306);
+ /* (307) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=307);
+ /* (308) likeop ::= LIKE_KW|MATCH */ yytestcase(yyruleno==308);
+ /* (309) exprlist ::= nexprlist */ yytestcase(yyruleno==309);
+ /* (310) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=310);
+ /* (311) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=311);
+ /* (312) nmnum ::= ON */ yytestcase(yyruleno==312);
+ /* (313) nmnum ::= DELETE */ yytestcase(yyruleno==313);
+ /* (314) nmnum ::= DEFAULT */ yytestcase(yyruleno==314);
+ /* (315) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==315);
+ /* (316) foreach_clause ::= */ yytestcase(yyruleno==316);
+ /* (317) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==317);
+ /* (318) trnm ::= nm */ yytestcase(yyruleno==318);
+ /* (319) tridxby ::= */ yytestcase(yyruleno==319);
+ /* (320) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==320);
+ /* (321) database_kw_opt ::= */ yytestcase(yyruleno==321);
+ /* (322) kwcolumn_opt ::= */ yytestcase(yyruleno==322);
+ /* (323) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==323);
+ /* (324) vtabarglist ::= vtabarg */ yytestcase(yyruleno==324);
+ /* (325) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==325);
+ /* (326) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==326);
+ /* (327) anylist ::= */ yytestcase(yyruleno==327);
+ /* (328) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==328);
+ /* (329) anylist ::= anylist ANY */ yytestcase(yyruleno==329);
break;
+/********** End reduce actions ************************************************/
};
- assert( yyruleno>=0 && yyruleno<sizeof(yyRuleInfo)/sizeof(yyRuleInfo[0]) );
+ assert( yyruleno<sizeof(yyRuleInfo)/sizeof(yyRuleInfo[0]) );
yygoto = yyRuleInfo[yyruleno].lhs;
yysize = yyRuleInfo[yyruleno].nrhs;
- yypParser->yyidx -= yysize;
- yyact = yy_find_reduce_action(yymsp[-yysize].stateno,(YYCODETYPE)yygoto);
- if( yyact <= YY_MAX_SHIFTREDUCE ){
- if( yyact>YY_MAX_SHIFT ) yyact += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE;
- /* If the reduce action popped at least
- ** one element off the stack, then we can push the new element back
- ** onto the stack here, and skip the stack overflow test in yy_shift().
- ** That gives a significant speed improvement. */
- if( yysize ){
- yypParser->yyidx++;
- yymsp -= yysize-1;
- yymsp->stateno = (YYACTIONTYPE)yyact;
- yymsp->major = (YYCODETYPE)yygoto;
- yymsp->minor = yygotominor;
- yyTraceShift(yypParser, yyact);
- }else{
- yy_shift(yypParser,yyact,yygoto,&yygotominor);
- }
- }else{
- assert( yyact == YY_ACCEPT_ACTION );
- yy_accept(yypParser);
- }
+ yyact = yy_find_reduce_action(yymsp[yysize].stateno,(YYCODETYPE)yygoto);
+
+ /* There are no SHIFTREDUCE actions on nonterminals because the table
+ ** generator has simplified them to pure REDUCE actions. */
+ assert( !(yyact>YY_MAX_SHIFT && yyact<=YY_MAX_SHIFTREDUCE) );
+
+ /* It is not possible for a REDUCE to be followed by an error */
+ assert( yyact!=YY_ERROR_ACTION );
+
+ yymsp += yysize+1;
+ yypParser->yytos = yymsp;
+ yymsp->stateno = (YYACTIONTYPE)yyact;
+ yymsp->major = (YYCODETYPE)yygoto;
+ yyTraceShift(yypParser, yyact, "... then shift");
}
/*
fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt);
}
#endif
- while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
+ while( yypParser->yytos>yypParser->yystack ) yy_pop_parser_stack(yypParser);
/* Here code is inserted which will be executed whenever the
** parser fails */
+/************ Begin %parse_failure code ***************************************/
+/************ End %parse_failure code *****************************************/
sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
#endif /* YYNOERRORRECOVERY */
static void yy_syntax_error(
yyParser *yypParser, /* The parser */
int yymajor, /* The major type of the error token */
- YYMINORTYPE yyminor /* The minor type of the error token */
+ sqlite3ParserTOKENTYPE yyminor /* The minor type of the error token */
){
sqlite3ParserARG_FETCH;
-#define TOKEN (yyminor.yy0)
+#define TOKEN yyminor
+/************ Begin %syntax_error code ****************************************/
UNUSED_PARAMETER(yymajor); /* Silence some compiler warnings */
- assert( TOKEN.z[0] ); /* The tokenizer always gives us a token */
- sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN);
+ if( TOKEN.z[0] ){
+ sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN);
+ }else{
+ sqlite3ErrorMsg(pParse, "incomplete input");
+ }
+/************ End %syntax_error code ******************************************/
sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt);
}
#endif
- while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
+#ifndef YYNOERRORRECOVERY
+ yypParser->yyerrcnt = -1;
+#endif
+ assert( yypParser->yytos==yypParser->yystack );
/* Here code is inserted which will be executed whenever the
** parser accepts */
+/*********** Begin %parse_accept code *****************************************/
+/*********** End %parse_accept code *******************************************/
sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
sqlite3ParserARG_PDECL /* Optional %extra_argument parameter */
){
YYMINORTYPE yyminorunion;
- int yyact; /* The parser action. */
+ unsigned int yyact; /* The parser action. */
#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY)
int yyendofinput; /* True if we are at the end of input */
#endif
#endif
yyParser *yypParser; /* The parser */
- /* (re)initialize the parser, if necessary */
yypParser = (yyParser*)yyp;
- if( yypParser->yyidx<0 ){
-#if YYSTACKDEPTH<=0
- if( yypParser->yystksz <=0 ){
- /*memset(&yyminorunion, 0, sizeof(yyminorunion));*/
- yyminorunion = yyzerominor;
- yyStackOverflow(yypParser, &yyminorunion);
- return;
- }
-#endif
- yypParser->yyidx = 0;
- yypParser->yyerrcnt = -1;
- yypParser->yystack[0].stateno = 0;
- yypParser->yystack[0].major = 0;
- }
- yyminorunion.yy0 = yyminor;
+ assert( yypParser->yytos!=0 );
#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY)
yyendofinput = (yymajor==0);
#endif
#ifndef NDEBUG
if( yyTraceFILE ){
- fprintf(yyTraceFILE,"%sInput %s\n",yyTracePrompt,yyTokenName[yymajor]);
+ int stateno = yypParser->yytos->stateno;
+ if( stateno < YY_MIN_REDUCE ){
+ fprintf(yyTraceFILE,"%sInput '%s' in state %d\n",
+ yyTracePrompt,yyTokenName[yymajor],stateno);
+ }else{
+ fprintf(yyTraceFILE,"%sInput '%s' with pending reduce %d\n",
+ yyTracePrompt,yyTokenName[yymajor],stateno-YY_MIN_REDUCE);
+ }
}
#endif
do{
yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor);
- if( yyact <= YY_MAX_SHIFTREDUCE ){
- if( yyact > YY_MAX_SHIFT ) yyact += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE;
- yy_shift(yypParser,yyact,yymajor,&yyminorunion);
+ if( yyact >= YY_MIN_REDUCE ){
+ yy_reduce(yypParser,yyact-YY_MIN_REDUCE,yymajor,yyminor);
+ }else if( yyact <= YY_MAX_SHIFTREDUCE ){
+ yy_shift(yypParser,yyact,yymajor,yyminor);
+#ifndef YYNOERRORRECOVERY
yypParser->yyerrcnt--;
+#endif
yymajor = YYNOCODE;
- }else if( yyact <= YY_MAX_REDUCE ){
- yy_reduce(yypParser,yyact-YY_MIN_REDUCE);
+ }else if( yyact==YY_ACCEPT_ACTION ){
+ yypParser->yytos--;
+ yy_accept(yypParser);
+ return;
}else{
assert( yyact == YY_ERROR_ACTION );
+ yyminorunion.yy0 = yyminor;
#ifdef YYERRORSYMBOL
int yymx;
#endif
**
*/
if( yypParser->yyerrcnt<0 ){
- yy_syntax_error(yypParser,yymajor,yyminorunion);
+ yy_syntax_error(yypParser,yymajor,yyminor);
}
- yymx = yypParser->yystack[yypParser->yyidx].major;
+ yymx = yypParser->yytos->major;
if( yymx==YYERRORSYMBOL || yyerrorhit ){
#ifndef NDEBUG
if( yyTraceFILE ){
yyTracePrompt,yyTokenName[yymajor]);
}
#endif
- yy_destructor(yypParser, (YYCODETYPE)yymajor,&yyminorunion);
+ yy_destructor(yypParser, (YYCODETYPE)yymajor, &yyminorunion);
yymajor = YYNOCODE;
}else{
- while(
- yypParser->yyidx >= 0 &&
- yymx != YYERRORSYMBOL &&
- (yyact = yy_find_reduce_action(
- yypParser->yystack[yypParser->yyidx].stateno,
+ while( yypParser->yytos >= yypParser->yystack
+ && yymx != YYERRORSYMBOL
+ && (yyact = yy_find_reduce_action(
+ yypParser->yytos->stateno,
YYERRORSYMBOL)) >= YY_MIN_REDUCE
){
yy_pop_parser_stack(yypParser);
}
- if( yypParser->yyidx < 0 || yymajor==0 ){
+ if( yypParser->yytos < yypParser->yystack || yymajor==0 ){
yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
yy_parse_failed(yypParser);
+#ifndef YYNOERRORRECOVERY
+ yypParser->yyerrcnt = -1;
+#endif
yymajor = YYNOCODE;
}else if( yymx!=YYERRORSYMBOL ){
- YYMINORTYPE u2;
- u2.YYERRSYMDT = 0;
- yy_shift(yypParser,yyact,YYERRORSYMBOL,&u2);
+ yy_shift(yypParser,yyact,YYERRORSYMBOL,yyminor);
}
}
yypParser->yyerrcnt = 3;
** Applications can set this macro (for example inside %include) if
** they intend to abandon the parse upon the first syntax error seen.
*/
- yy_syntax_error(yypParser,yymajor,yyminorunion);
+ yy_syntax_error(yypParser,yymajor, yyminor);
yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
yymajor = YYNOCODE;
** three input tokens have been successfully shifted.
*/
if( yypParser->yyerrcnt<=0 ){
- yy_syntax_error(yypParser,yymajor,yyminorunion);
+ yy_syntax_error(yypParser,yymajor, yyminor);
}
yypParser->yyerrcnt = 3;
yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
if( yyendofinput ){
yy_parse_failed(yypParser);
+#ifndef YYNOERRORRECOVERY
+ yypParser->yyerrcnt = -1;
+#endif
}
yymajor = YYNOCODE;
#endif
}
- }while( yymajor!=YYNOCODE && yypParser->yyidx>=0 );
+ }while( yymajor!=YYNOCODE && yypParser->yytos>yypParser->yystack );
#ifndef NDEBUG
if( yyTraceFILE ){
- fprintf(yyTraceFILE,"%sReturn\n",yyTracePrompt);
+ yyStackEntry *i;
+ char cDiv = '[';
+ fprintf(yyTraceFILE,"%sReturn. Stack=",yyTracePrompt);
+ for(i=&yypParser->yystack[1]; i<=yypParser->yytos; i++){
+ fprintf(yyTraceFILE,"%c%s", cDiv, yyTokenName[i->major]);
+ cDiv = ' ';
+ }
+ fprintf(yyTraceFILE,"]\n");
}
#endif
return;
/* #include "sqliteInt.h" */
/* #include <stdlib.h> */
+/* Character classes for tokenizing
+**
+** In the sqlite3GetToken() function, a switch() on aiClass[c] is implemented
+** using a lookup table, whereas a switch() directly on c uses a binary search.
+** The lookup table is much faster. To maximize speed, and to ensure that
+** a lookup table is used, all of the classes need to be small integers and
+** all of them need to be used within the switch.
+*/
+#define CC_X 0 /* The letter 'x', or start of BLOB literal */
+#define CC_KYWD 1 /* Alphabetics or '_'. Usable in a keyword */
+#define CC_ID 2 /* unicode characters usable in IDs */
+#define CC_DIGIT 3 /* Digits */
+#define CC_DOLLAR 4 /* '$' */
+#define CC_VARALPHA 5 /* '@', '#', ':'. Alphabetic SQL variables */
+#define CC_VARNUM 6 /* '?'. Numeric SQL variables */
+#define CC_SPACE 7 /* Space characters */
+#define CC_QUOTE 8 /* '"', '\'', or '`'. String literals, quoted ids */
+#define CC_QUOTE2 9 /* '['. [...] style quoted ids */
+#define CC_PIPE 10 /* '|'. Bitwise OR or concatenate */
+#define CC_MINUS 11 /* '-'. Minus or SQL-style comment */
+#define CC_LT 12 /* '<'. Part of < or <= or <> */
+#define CC_GT 13 /* '>'. Part of > or >= */
+#define CC_EQ 14 /* '='. Part of = or == */
+#define CC_BANG 15 /* '!'. Part of != */
+#define CC_SLASH 16 /* '/'. / or c-style comment */
+#define CC_LP 17 /* '(' */
+#define CC_RP 18 /* ')' */
+#define CC_SEMI 19 /* ';' */
+#define CC_PLUS 20 /* '+' */
+#define CC_STAR 21 /* '*' */
+#define CC_PERCENT 22 /* '%' */
+#define CC_COMMA 23 /* ',' */
+#define CC_AND 24 /* '&' */
+#define CC_TILDA 25 /* '~' */
+#define CC_DOT 26 /* '.' */
+#define CC_ILLEGAL 27 /* Illegal character */
+
+static const unsigned char aiClass[] = {
+#ifdef SQLITE_ASCII
+/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf */
+/* 0x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 7, 7, 27, 7, 7, 27, 27,
+/* 1x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+/* 2x */ 7, 15, 8, 5, 4, 22, 24, 8, 17, 18, 21, 20, 23, 11, 26, 16,
+/* 3x */ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 5, 19, 12, 14, 13, 6,
+/* 4x */ 5, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+/* 5x */ 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 9, 27, 27, 27, 1,
+/* 6x */ 8, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+/* 7x */ 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 27, 10, 27, 25, 27,
+/* 8x */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* 9x */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Ax */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Bx */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Cx */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Dx */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Ex */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+/* Fx */ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
+#endif
+#ifdef SQLITE_EBCDIC
+/* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf */
+/* 0x */ 27, 27, 27, 27, 27, 7, 27, 27, 27, 27, 27, 27, 7, 7, 27, 27,
+/* 1x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+/* 2x */ 27, 27, 27, 27, 27, 7, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+/* 3x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+/* 4x */ 7, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 26, 12, 17, 20, 10,
+/* 5x */ 24, 27, 27, 27, 27, 27, 27, 27, 27, 27, 15, 4, 21, 18, 19, 27,
+/* 6x */ 11, 16, 27, 27, 27, 27, 27, 27, 27, 27, 27, 23, 22, 1, 13, 6,
+/* 7x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 8, 5, 5, 5, 8, 14, 8,
+/* 8x */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27,
+/* 9x */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27,
+/* Ax */ 27, 25, 1, 1, 1, 1, 1, 0, 1, 1, 27, 27, 27, 27, 27, 27,
+/* Bx */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 9, 27, 27, 27, 27, 27,
+/* Cx */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27,
+/* Dx */ 27, 1, 1, 1, 1, 1, 1, 1, 1, 1, 27, 27, 27, 27, 27, 27,
+/* Ex */ 27, 27, 1, 1, 1, 1, 1, 0, 1, 1, 27, 27, 27, 27, 27, 27,
+/* Fx */ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 27, 27, 27, 27, 27, 27,
+#endif
+};
+
/*
-** The charMap() macro maps alphabetic characters into their
+** The charMap() macro maps alphabetic characters (only) into their
** lower-case ASCII equivalent. On ASCII machines, this is just
** an upper-to-lower case map. On EBCDIC machines we also need
-** to adjust the encoding. Only alphabetic characters and underscores
-** need to be translated.
+** to adjust the encoding. The mapping is only valid for alphabetics
+** which are the only characters for which this feature is used.
+**
+** Used by keywordhash.h
*/
#ifdef SQLITE_ASCII
# define charMap(X) sqlite3UpperToLower[(unsigned char)X]
** returned. If the input is not a keyword, TK_ID is returned.
**
** The implementation of this routine was generated by a program,
-** mkkeywordhash.h, located in the tool subdirectory of the distribution.
+** mkkeywordhash.c, located in the tool subdirectory of the distribution.
** The output of the mkkeywordhash.c program is written into a file
** named keywordhash.h and then included into this source file by
** the #include below.
** on platforms with limited memory.
*/
/* Hash score: 182 */
-static int keywordCode(const char *z, int n){
- /* zText[] encodes 834 bytes of keywords in 554 bytes */
- /* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */
- /* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */
- /* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */
- /* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */
- /* BETWEENOTNULLIKECASCADELETECASECOLLATECREATECURRENT_DATEDETACH */
- /* IMMEDIATEJOINSERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHEN */
- /* WHERENAMEAFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMIT */
- /* CONFLICTCROSSCURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAIL */
- /* FROMFULLGLOBYIFISNULLORDERESTRICTRIGHTROLLBACKROWUNIONUSING */
- /* VACUUMVIEWINITIALLY */
- static const char zText[553] = {
- 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H',
- 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G',
- 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A',
- 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F',
- 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N',
- 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I',
- 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E',
- 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E',
- 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T',
- 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q',
- 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S',
- 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A',
- 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E',
- 'B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C','A',
- 'S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L','A',
- 'T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D','A',
- 'T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E','J',
- 'O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A','L',
- 'Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U','E',
- 'S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W','H',
- 'E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C','E',
- 'A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R','E',
- 'M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M','M',
- 'I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U','R',
- 'R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M','A',
- 'R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T','D',
- 'R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L','O',
- 'B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T',
- 'R','I','C','T','R','I','G','H','T','R','O','L','L','B','A','C','K','R',
- 'O','W','U','N','I','O','N','U','S','I','N','G','V','A','C','U','U','M',
- 'V','I','E','W','I','N','I','T','I','A','L','L','Y',
- };
- static const unsigned char aHash[127] = {
- 76, 105, 117, 74, 0, 45, 0, 0, 82, 0, 77, 0, 0,
- 42, 12, 78, 15, 0, 116, 85, 54, 112, 0, 19, 0, 0,
- 121, 0, 119, 115, 0, 22, 93, 0, 9, 0, 0, 70, 71,
- 0, 69, 6, 0, 48, 90, 102, 0, 118, 101, 0, 0, 44,
- 0, 103, 24, 0, 17, 0, 122, 53, 23, 0, 5, 110, 25,
- 96, 0, 0, 124, 106, 60, 123, 57, 28, 55, 0, 91, 0,
- 100, 26, 0, 99, 0, 0, 0, 95, 92, 97, 88, 109, 14,
- 39, 108, 0, 81, 0, 18, 89, 111, 32, 0, 120, 80, 113,
- 62, 46, 84, 0, 0, 94, 40, 59, 114, 0, 36, 0, 0,
- 29, 0, 86, 63, 64, 0, 20, 61, 0, 56,
- };
- static const unsigned char aNext[124] = {
- 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0,
- 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50,
- 0, 43, 3, 47, 0, 0, 0, 0, 30, 0, 58, 0, 38,
- 0, 0, 0, 1, 66, 0, 0, 67, 0, 41, 0, 0, 0,
- 0, 0, 0, 49, 65, 0, 0, 0, 0, 31, 52, 16, 34,
- 10, 0, 0, 0, 0, 0, 0, 0, 11, 72, 79, 0, 8,
- 0, 104, 98, 0, 107, 0, 87, 0, 75, 51, 0, 27, 37,
- 73, 83, 0, 35, 68, 0, 0,
- };
- static const unsigned char aLen[124] = {
- 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6,
- 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6,
- 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10,
- 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7,
- 6, 6, 5, 6, 5, 5, 9, 7, 7, 3, 2, 4, 4,
- 7, 3, 6, 4, 7, 6, 12, 6, 9, 4, 6, 5, 4,
- 7, 6, 5, 6, 7, 5, 4, 5, 6, 5, 7, 3, 7,
- 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, 7, 8, 8,
- 2, 4, 4, 4, 4, 4, 2, 2, 6, 5, 8, 5, 8,
- 3, 5, 5, 6, 4, 9, 3,
- };
- static const unsigned short int aOffset[124] = {
- 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33,
- 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81,
- 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152,
- 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192,
- 199, 204, 209, 212, 218, 221, 225, 234, 240, 240, 240, 243, 246,
- 250, 251, 255, 261, 265, 272, 278, 290, 296, 305, 307, 313, 318,
- 320, 327, 332, 337, 343, 349, 354, 358, 361, 367, 371, 378, 380,
- 387, 389, 391, 400, 404, 410, 416, 424, 429, 429, 445, 452, 459,
- 460, 467, 471, 475, 479, 483, 486, 488, 490, 496, 500, 508, 513,
- 521, 524, 529, 534, 540, 544, 549,
- };
- static const unsigned char aCode[124] = {
- TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE,
- TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN,
- TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD,
- TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE,
- TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE,
- TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW,
- TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT,
- TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO,
- TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP,
- TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH,
- TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP,
- TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN,
- TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, TK_LIKE_KW,
- TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, TK_COLLATE,
- TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, TK_JOIN,
- TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA,
- TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN,
- TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, TK_AND,
- TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, TK_CAST,
- TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW,
- TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, TK_IS,
- TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, TK_LIKE_KW,
- TK_BY, TK_IF, TK_ISNULL, TK_ORDER, TK_RESTRICT,
- TK_JOIN_KW, TK_ROLLBACK, TK_ROW, TK_UNION, TK_USING,
- TK_VACUUM, TK_VIEW, TK_INITIALLY, TK_ALL,
- };
- int h, i;
- if( n<2 ) return TK_ID;
- h = ((charMap(z[0])*4) ^
- (charMap(z[n-1])*3) ^
- n) % 127;
- for(i=((int)aHash[h])-1; i>=0; i=((int)aNext[i])-1){
- if( aLen[i]==n && sqlite3StrNICmp(&zText[aOffset[i]],z,n)==0 ){
+/* zKWText[] encodes 834 bytes of keyword text in 554 bytes */
+/* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */
+/* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */
+/* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */
+/* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */
+/* BETWEENOTNULLIKECASCADELETECASECOLLATECREATECURRENT_DATEDETACH */
+/* IMMEDIATEJOINSERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHEN */
+/* WHERENAMEAFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMIT */
+/* CONFLICTCROSSCURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAIL */
+/* FROMFULLGLOBYIFISNULLORDERESTRICTRIGHTROLLBACKROWUNIONUSING */
+/* VACUUMVIEWINITIALLY */
+static const char zKWText[553] = {
+ 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H',
+ 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G',
+ 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A',
+ 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F',
+ 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N',
+ 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I',
+ 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E',
+ 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E',
+ 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T',
+ 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q',
+ 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S',
+ 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A',
+ 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E',
+ 'B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C','A',
+ 'S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L','A',
+ 'T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D','A',
+ 'T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E','J',
+ 'O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A','L',
+ 'Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U','E',
+ 'S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W','H',
+ 'E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C','E',
+ 'A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R','E',
+ 'M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M','M',
+ 'I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U','R',
+ 'R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M','A',
+ 'R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T','D',
+ 'R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L','O',
+ 'B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T',
+ 'R','I','C','T','R','I','G','H','T','R','O','L','L','B','A','C','K','R',
+ 'O','W','U','N','I','O','N','U','S','I','N','G','V','A','C','U','U','M',
+ 'V','I','E','W','I','N','I','T','I','A','L','L','Y',
+};
+/* aKWHash[i] is the hash value for the i-th keyword */
+static const unsigned char aKWHash[127] = {
+ 76, 105, 117, 74, 0, 45, 0, 0, 82, 0, 77, 0, 0,
+ 42, 12, 78, 15, 0, 116, 85, 54, 112, 0, 19, 0, 0,
+ 121, 0, 119, 115, 0, 22, 93, 0, 9, 0, 0, 70, 71,
+ 0, 69, 6, 0, 48, 90, 102, 0, 118, 101, 0, 0, 44,
+ 0, 103, 24, 0, 17, 0, 122, 53, 23, 0, 5, 110, 25,
+ 96, 0, 0, 124, 106, 60, 123, 57, 28, 55, 0, 91, 0,
+ 100, 26, 0, 99, 0, 0, 0, 95, 92, 97, 88, 109, 14,
+ 39, 108, 0, 81, 0, 18, 89, 111, 32, 0, 120, 80, 113,
+ 62, 46, 84, 0, 0, 94, 40, 59, 114, 0, 36, 0, 0,
+ 29, 0, 86, 63, 64, 0, 20, 61, 0, 56,
+};
+/* aKWNext[] forms the hash collision chain. If aKWHash[i]==0
+** then the i-th keyword has no more hash collisions. Otherwise,
+** the next keyword with the same hash is aKWHash[i]-1. */
+static const unsigned char aKWNext[124] = {
+ 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0,
+ 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50,
+ 0, 43, 3, 47, 0, 0, 0, 0, 30, 0, 58, 0, 38,
+ 0, 0, 0, 1, 66, 0, 0, 67, 0, 41, 0, 0, 0,
+ 0, 0, 0, 49, 65, 0, 0, 0, 0, 31, 52, 16, 34,
+ 10, 0, 0, 0, 0, 0, 0, 0, 11, 72, 79, 0, 8,
+ 0, 104, 98, 0, 107, 0, 87, 0, 75, 51, 0, 27, 37,
+ 73, 83, 0, 35, 68, 0, 0,
+};
+/* aKWLen[i] is the length (in bytes) of the i-th keyword */
+static const unsigned char aKWLen[124] = {
+ 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6,
+ 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6,
+ 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10,
+ 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7,
+ 6, 6, 5, 6, 5, 5, 9, 7, 7, 3, 2, 4, 4,
+ 7, 3, 6, 4, 7, 6, 12, 6, 9, 4, 6, 5, 4,
+ 7, 6, 5, 6, 7, 5, 4, 5, 6, 5, 7, 3, 7,
+ 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, 7, 8, 8,
+ 2, 4, 4, 4, 4, 4, 2, 2, 6, 5, 8, 5, 8,
+ 3, 5, 5, 6, 4, 9, 3,
+};
+/* aKWOffset[i] is the index into zKWText[] of the start of
+** the text for the i-th keyword. */
+static const unsigned short int aKWOffset[124] = {
+ 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33,
+ 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81,
+ 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152,
+ 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192,
+ 199, 204, 209, 212, 218, 221, 225, 234, 240, 240, 240, 243, 246,
+ 250, 251, 255, 261, 265, 272, 278, 290, 296, 305, 307, 313, 318,
+ 320, 327, 332, 337, 343, 349, 354, 358, 361, 367, 371, 378, 380,
+ 387, 389, 391, 400, 404, 410, 416, 424, 429, 429, 445, 452, 459,
+ 460, 467, 471, 475, 479, 483, 486, 488, 490, 496, 500, 508, 513,
+ 521, 524, 529, 534, 540, 544, 549,
+};
+/* aKWCode[i] is the parser symbol code for the i-th keyword */
+static const unsigned char aKWCode[124] = {
+ TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE,
+ TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN,
+ TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD,
+ TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE,
+ TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE,
+ TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW,
+ TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT,
+ TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO,
+ TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP,
+ TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH,
+ TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP,
+ TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN,
+ TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, TK_LIKE_KW,
+ TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, TK_COLLATE,
+ TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, TK_JOIN,
+ TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA,
+ TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN,
+ TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, TK_AND,
+ TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, TK_CAST,
+ TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW,
+ TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, TK_IS,
+ TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, TK_LIKE_KW,
+ TK_BY, TK_IF, TK_ISNULL, TK_ORDER, TK_RESTRICT,
+ TK_JOIN_KW, TK_ROLLBACK, TK_ROW, TK_UNION, TK_USING,
+ TK_VACUUM, TK_VIEW, TK_INITIALLY, TK_ALL,
+};
+/* Check to see if z[0..n-1] is a keyword. If it is, write the
+** parser symbol code for that keyword into *pType. Always
+** return the integer n (the length of the token). */
+static int keywordCode(const char *z, int n, int *pType){
+ int i, j;
+ const char *zKW;
+ if( n>=2 ){
+ i = ((charMap(z[0])*4) ^ (charMap(z[n-1])*3) ^ n) % 127;
+ for(i=((int)aKWHash[i])-1; i>=0; i=((int)aKWNext[i])-1){
+ if( aKWLen[i]!=n ) continue;
+ j = 0;
+ zKW = &zKWText[aKWOffset[i]];
+#ifdef SQLITE_ASCII
+ while( j<n && (z[j]&~0x20)==zKW[j] ){ j++; }
+#endif
+#ifdef SQLITE_EBCDIC
+ while( j<n && toupper(z[j])==zKW[j] ){ j++; }
+#endif
+ if( j<n ) continue;
testcase( i==0 ); /* REINDEX */
testcase( i==1 ); /* INDEXED */
testcase( i==2 ); /* INDEX */
testcase( i==121 ); /* VIEW */
testcase( i==122 ); /* INITIALLY */
testcase( i==123 ); /* ALL */
- return aCode[i];
+ *pType = aKWCode[i];
+ break;
}
}
- return TK_ID;
+ return n;
}
SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char *z, int n){
- return keywordCode((char*)z, n);
+ int id = TK_ID;
+ keywordCode((char*)z, n, &id);
+ return id;
}
#define SQLITE_N_KEYWORD 124
/*
-** Return the length of the token that begins at z[0].
+** Return the length (in bytes) of the token that begins at z[0].
** Store the token type in *tokenType before returning.
*/
SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *z, int *tokenType){
int i, c;
- switch( *z ){
- case ' ': case '\t': case '\n': case '\f': case '\r': {
+ switch( aiClass[*z] ){ /* Switch on the character-class of the first byte
+ ** of the token. See the comment on the CC_ defines
+ ** above. */
+ case CC_SPACE: {
testcase( z[0]==' ' );
testcase( z[0]=='\t' );
testcase( z[0]=='\n' );
*tokenType = TK_SPACE;
return i;
}
- case '-': {
+ case CC_MINUS: {
if( z[1]=='-' ){
for(i=2; (c=z[i])!=0 && c!='\n'; i++){}
*tokenType = TK_SPACE; /* IMP: R-22934-25134 */
*tokenType = TK_MINUS;
return 1;
}
- case '(': {
+ case CC_LP: {
*tokenType = TK_LP;
return 1;
}
- case ')': {
+ case CC_RP: {
*tokenType = TK_RP;
return 1;
}
- case ';': {
+ case CC_SEMI: {
*tokenType = TK_SEMI;
return 1;
}
- case '+': {
+ case CC_PLUS: {
*tokenType = TK_PLUS;
return 1;
}
- case '*': {
+ case CC_STAR: {
*tokenType = TK_STAR;
return 1;
}
- case '/': {
+ case CC_SLASH: {
if( z[1]!='*' || z[2]==0 ){
*tokenType = TK_SLASH;
return 1;
*tokenType = TK_SPACE; /* IMP: R-22934-25134 */
return i;
}
- case '%': {
+ case CC_PERCENT: {
*tokenType = TK_REM;
return 1;
}
- case '=': {
+ case CC_EQ: {
*tokenType = TK_EQ;
return 1 + (z[1]=='=');
}
- case '<': {
+ case CC_LT: {
if( (c=z[1])=='=' ){
*tokenType = TK_LE;
return 2;
return 1;
}
}
- case '>': {
+ case CC_GT: {
if( (c=z[1])=='=' ){
*tokenType = TK_GE;
return 2;
return 1;
}
}
- case '!': {
+ case CC_BANG: {
if( z[1]!='=' ){
*tokenType = TK_ILLEGAL;
- return 2;
+ return 1;
}else{
*tokenType = TK_NE;
return 2;
}
}
- case '|': {
+ case CC_PIPE: {
if( z[1]!='|' ){
*tokenType = TK_BITOR;
return 1;
return 2;
}
}
- case ',': {
+ case CC_COMMA: {
*tokenType = TK_COMMA;
return 1;
}
- case '&': {
+ case CC_AND: {
*tokenType = TK_BITAND;
return 1;
}
- case '~': {
+ case CC_TILDA: {
*tokenType = TK_BITNOT;
return 1;
}
- case '`':
- case '\'':
- case '"': {
+ case CC_QUOTE: {
int delim = z[0];
testcase( delim=='`' );
testcase( delim=='\'' );
return i;
}
}
- case '.': {
+ case CC_DOT: {
#ifndef SQLITE_OMIT_FLOATING_POINT
if( !sqlite3Isdigit(z[1]) )
#endif
/* If the next character is a digit, this is a floating point
** number that begins with ".". Fall thru into the next case */
}
- case '0': case '1': case '2': case '3': case '4':
- case '5': case '6': case '7': case '8': case '9': {
+ case CC_DIGIT: {
testcase( z[0]=='0' ); testcase( z[0]=='1' ); testcase( z[0]=='2' );
testcase( z[0]=='3' ); testcase( z[0]=='4' ); testcase( z[0]=='5' );
testcase( z[0]=='6' ); testcase( z[0]=='7' ); testcase( z[0]=='8' );
}
return i;
}
- case '[': {
+ case CC_QUOTE2: {
for(i=1, c=z[0]; c!=']' && (c=z[i])!=0; i++){}
*tokenType = c==']' ? TK_ID : TK_ILLEGAL;
return i;
}
- case '?': {
+ case CC_VARNUM: {
*tokenType = TK_VARIABLE;
for(i=1; sqlite3Isdigit(z[i]); i++){}
return i;
}
-#ifndef SQLITE_OMIT_TCL_VARIABLE
- case '$':
-#endif
- case '@': /* For compatibility with MS SQL Server */
- case '#':
- case ':': {
+ case CC_DOLLAR:
+ case CC_VARALPHA: {
int n = 0;
testcase( z[0]=='$' ); testcase( z[0]=='@' );
testcase( z[0]==':' ); testcase( z[0]=='#' );
if( n==0 ) *tokenType = TK_ILLEGAL;
return i;
}
+ case CC_KYWD: {
+ for(i=1; aiClass[z[i]]<=CC_KYWD; i++){}
+ if( IdChar(z[i]) ){
+ /* This token started out using characters that can appear in keywords,
+ ** but z[i] is a character not allowed within keywords, so this must
+ ** be an identifier instead */
+ i++;
+ break;
+ }
+ *tokenType = TK_ID;
+ return keywordCode((char*)z, i, tokenType);
+ }
+ case CC_X: {
#ifndef SQLITE_OMIT_BLOB_LITERAL
- case 'x': case 'X': {
testcase( z[0]=='x' ); testcase( z[0]=='X' );
if( z[1]=='\'' ){
*tokenType = TK_BLOB;
if( z[i] ) i++;
return i;
}
- /* Otherwise fall through to the next case */
- }
#endif
+ /* If it is not a BLOB literal, then it must be an ID, since no
+ ** SQL keywords start with the letter 'x'. Fall through */
+ }
+ case CC_ID: {
+ i = 1;
+ break;
+ }
default: {
- if( !IdChar(*z) ){
- break;
- }
- for(i=1; IdChar(z[i]); i++){}
- *tokenType = keywordCode((char*)z, i);
- return i;
+ *tokenType = TK_ILLEGAL;
+ return 1;
}
}
- *tokenType = TK_ILLEGAL;
- return 1;
+ while( IdChar(z[i]) ){ i++; }
+ *tokenType = TK_ID;
+ return i;
}
/*
*/
SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){
int nErr = 0; /* Number of errors encountered */
- int i; /* Loop counter */
void *pEngine; /* The LEMON-generated LALR(1) parser */
+ int n = 0; /* Length of the next token token */
int tokenType; /* type of the next token */
int lastTokenParsed = -1; /* type of the previous token */
- u8 enableLookaside; /* Saved value of db->lookaside.bEnabled */
sqlite3 *db = pParse->db; /* The database connection */
int mxSqlLen; /* Max length of an SQL string */
+#ifdef sqlite3Parser_ENGINEALWAYSONSTACK
+ yyParser sEngine; /* Space to hold the Lemon-generated Parser object */
+#endif
assert( zSql!=0 );
mxSqlLen = db->aLimit[SQLITE_LIMIT_SQL_LENGTH];
}
pParse->rc = SQLITE_OK;
pParse->zTail = zSql;
- i = 0;
assert( pzErrMsg!=0 );
/* sqlite3ParserTrace(stdout, "parser: "); */
+#ifdef sqlite3Parser_ENGINEALWAYSONSTACK
+ pEngine = &sEngine;
+ sqlite3ParserInit(pEngine);
+#else
pEngine = sqlite3ParserAlloc(sqlite3Malloc);
if( pEngine==0 ){
- db->mallocFailed = 1;
- return SQLITE_NOMEM;
+ sqlite3OomFault(db);
+ return SQLITE_NOMEM_BKPT;
}
+#endif
assert( pParse->pNewTable==0 );
assert( pParse->pNewTrigger==0 );
assert( pParse->nVar==0 );
- assert( pParse->nzVar==0 );
- assert( pParse->azVar==0 );
- enableLookaside = db->lookaside.bEnabled;
- if( db->lookaside.pStart ) db->lookaside.bEnabled = 1;
- while( !db->mallocFailed && zSql[i]!=0 ){
- assert( i>=0 );
- pParse->sLastToken.z = &zSql[i];
- pParse->sLastToken.n = sqlite3GetToken((unsigned char*)&zSql[i],&tokenType);
- i += pParse->sLastToken.n;
- if( i>mxSqlLen ){
- pParse->rc = SQLITE_TOOBIG;
- break;
- }
- switch( tokenType ){
- case TK_SPACE: {
- if( db->u1.isInterrupted ){
- sqlite3ErrorMsg(pParse, "interrupt");
- pParse->rc = SQLITE_INTERRUPT;
- goto abort_parse;
- }
+ assert( pParse->pVList==0 );
+ while( 1 ){
+ if( zSql[0]!=0 ){
+ n = sqlite3GetToken((u8*)zSql, &tokenType);
+ mxSqlLen -= n;
+ if( mxSqlLen<0 ){
+ pParse->rc = SQLITE_TOOBIG;
break;
}
- case TK_ILLEGAL: {
- sqlite3ErrorMsg(pParse, "unrecognized token: \"%T\"",
- &pParse->sLastToken);
- goto abort_parse;
+ }else{
+ /* Upon reaching the end of input, call the parser two more times
+ ** with tokens TK_SEMI and 0, in that order. */
+ if( lastTokenParsed==TK_SEMI ){
+ tokenType = 0;
+ }else if( lastTokenParsed==0 ){
+ break;
+ }else{
+ tokenType = TK_SEMI;
}
- case TK_SEMI: {
- pParse->zTail = &zSql[i];
- /* Fall thru into the default case */
+ n = 0;
+ }
+ if( tokenType>=TK_SPACE ){
+ assert( tokenType==TK_SPACE || tokenType==TK_ILLEGAL );
+ if( db->u1.isInterrupted ){
+ pParse->rc = SQLITE_INTERRUPT;
+ break;
}
- default: {
- sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse);
- lastTokenParsed = tokenType;
- if( pParse->rc!=SQLITE_OK ){
- goto abort_parse;
- }
+ if( tokenType==TK_ILLEGAL ){
+ sqlite3ErrorMsg(pParse, "unrecognized token: \"%.*s\"", n, zSql);
break;
}
+ zSql += n;
+ }else{
+ pParse->sLastToken.z = zSql;
+ pParse->sLastToken.n = n;
+ sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse);
+ lastTokenParsed = tokenType;
+ zSql += n;
+ if( pParse->rc!=SQLITE_OK || db->mallocFailed ) break;
}
}
-abort_parse:
assert( nErr==0 );
- if( pParse->rc==SQLITE_OK && db->mallocFailed==0 ){
- assert( zSql[i]==0 );
- if( lastTokenParsed!=TK_SEMI ){
- sqlite3Parser(pEngine, TK_SEMI, pParse->sLastToken, pParse);
- pParse->zTail = &zSql[i];
- }
- if( pParse->rc==SQLITE_OK && db->mallocFailed==0 ){
- sqlite3Parser(pEngine, 0, pParse->sLastToken, pParse);
- }
- }
+ pParse->zTail = zSql;
#ifdef YYTRACKMAXSTACKDEPTH
sqlite3_mutex_enter(sqlite3MallocMutex());
- sqlite3StatusSet(SQLITE_STATUS_PARSER_STACK,
+ sqlite3StatusHighwater(SQLITE_STATUS_PARSER_STACK,
sqlite3ParserStackPeak(pEngine)
);
sqlite3_mutex_leave(sqlite3MallocMutex());
#endif /* YYDEBUG */
+#ifdef sqlite3Parser_ENGINEALWAYSONSTACK
+ sqlite3ParserFinalize(pEngine);
+#else
sqlite3ParserFree(pEngine, sqlite3_free);
- db->lookaside.bEnabled = enableLookaside;
+#endif
if( db->mallocFailed ){
- pParse->rc = SQLITE_NOMEM;
+ pParse->rc = SQLITE_NOMEM_BKPT;
}
if( pParse->rc!=SQLITE_OK && pParse->rc!=SQLITE_DONE && pParse->zErrMsg==0 ){
pParse->zErrMsg = sqlite3MPrintf(db, "%s", sqlite3ErrStr(pParse->rc));
sqlite3DeleteTable(db, pParse->pNewTable);
}
- if( pParse->bFreeWith ) sqlite3WithDelete(db, pParse->pWith);
+ if( pParse->pWithToFree ) sqlite3WithDelete(db, pParse->pWithToFree);
sqlite3DeleteTrigger(db, pParse->pNewTrigger);
- for(i=pParse->nzVar-1; i>=0; i--) sqlite3DbFree(db, pParse->azVar[i]);
- sqlite3DbFree(db, pParse->azVar);
+ sqlite3DbFree(db, pParse->pVList);
while( pParse->pAinc ){
AutoincInfo *p = pParse->pAinc;
pParse->pAinc = p->pNext;
- sqlite3DbFree(db, p);
+ sqlite3DbFreeNN(db, p);
}
while( pParse->pZombieTab ){
Table *p = pParse->pZombieTab;
** to recognize the end of a trigger can be omitted. All we have to do
** is look for a semicolon that is not part of an string or comment.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *zSql){
+SQLITE_API int sqlite3_complete(const char *zSql){
u8 state = 0; /* Current state, using numbers defined in header comment */
u8 token; /* Value of the next token */
** above, except that the parameter is required to be UTF-16 encoded, not
** UTF-8.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *zSql){
+SQLITE_API int sqlite3_complete16(const void *zSql){
sqlite3_value *pVal;
char const *zSql8;
int rc;
if( zSql8 ){
rc = sqlite3_complete(zSql8);
}else{
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
sqlite3ValueFree(pVal);
return rc & 0xff;
*/
/* #include "sqlite3.h" */
+#ifdef SQLITE_OMIT_VIRTUALTABLE
+# undef SQLITE_ENABLE_RTREE
+#endif
+
#if 0
extern "C" {
#endif /* __cplusplus */
/************** End of rtree.h ***********************************************/
/************** Continuing where we left off in main.c ***********************/
#endif
-#ifdef SQLITE_ENABLE_ICU
+#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS)
/************** Include sqliteicu.h in the middle of main.c ******************/
/************** Begin file sqliteicu.h ***************************************/
/*
#ifdef SQLITE_ENABLE_JSON1
SQLITE_PRIVATE int sqlite3Json1Init(sqlite3*);
#endif
+#ifdef SQLITE_ENABLE_STMTVTAB
+SQLITE_PRIVATE int sqlite3StmtVtabInit(sqlite3*);
+#endif
#ifdef SQLITE_ENABLE_FTS5
SQLITE_PRIVATE int sqlite3Fts5Init(sqlite3*);
#endif
/* IMPLEMENTATION-OF: R-53536-42575 The sqlite3_libversion() function returns
** a pointer to the to the sqlite3_version[] string constant.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void){ return sqlite3_version; }
+SQLITE_API const char *sqlite3_libversion(void){ return sqlite3_version; }
-/* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a
+/* IMPLEMENTATION-OF: R-25063-23286 The sqlite3_sourceid() function returns a
** pointer to a string constant whose value is the same as the
-** SQLITE_SOURCE_ID C preprocessor macro.
+** SQLITE_SOURCE_ID C preprocessor macro. Except if SQLite is built using
+** an edited copy of the amalgamation, then the last four characters of
+** the hash might be different from SQLITE_SOURCE_ID.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
+/* SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } */
/* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function
** returns an integer equal to SQLITE_VERSION_NUMBER.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; }
+SQLITE_API int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; }
/* IMPLEMENTATION-OF: R-20790-14025 The sqlite3_threadsafe() function returns
** zero if and only if SQLite was compiled with mutexing code omitted due to
** the SQLITE_THREADSAFE compile-time option being set to 0.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; }
+SQLITE_API int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; }
/*
** When compiling the test fixture or with debugging enabled (on Win32),
** * Recursive calls to this routine from thread X return immediately
** without blocking.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void){
+SQLITE_API int sqlite3_initialize(void){
MUTEX_LOGIC( sqlite3_mutex *pMaster; ) /* The main static mutex */
int rc; /* Result code */
#ifdef SQLITE_EXTRA_INIT
sqlite3GlobalConfig.pInitMutex =
sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE);
if( sqlite3GlobalConfig.bCoreMutex && !sqlite3GlobalConfig.pInitMutex ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
}
}
*/
sqlite3_mutex_enter(sqlite3GlobalConfig.pInitMutex);
if( sqlite3GlobalConfig.isInit==0 && sqlite3GlobalConfig.inProgress==0 ){
- FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
sqlite3GlobalConfig.inProgress = 1;
- memset(pHash, 0, sizeof(sqlite3GlobalFunctions));
- sqlite3RegisterGlobalFunctions();
+#ifdef SQLITE_ENABLE_SQLLOG
+ {
+ extern void sqlite3_init_sqllog(void);
+ sqlite3_init_sqllog();
+ }
+#endif
+ memset(&sqlite3BuiltinFunctions, 0, sizeof(sqlite3BuiltinFunctions));
+ sqlite3RegisterBuiltinFunctions();
if( sqlite3GlobalConfig.isPCacheInit==0 ){
rc = sqlite3PcacheInitialize();
}
sqlite3GlobalConfig.isPCacheInit = 1;
rc = sqlite3OsInit();
}
+#ifdef SQLITE_ENABLE_DESERIALIZE
+ if( rc==SQLITE_OK ){
+ rc = sqlite3MemdbInit();
+ }
+#endif
if( rc==SQLITE_OK ){
sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage,
sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage);
#ifndef NDEBUG
#ifndef SQLITE_OMIT_FLOATING_POINT
/* This section of code's only "output" is via assert() statements. */
- if ( rc==SQLITE_OK ){
+ if( rc==SQLITE_OK ){
u64 x = (((u64)1)<<63)-1;
double y;
assert(sizeof(x)==8);
** on when SQLite is already shut down. If SQLite is already shut down
** when this routine is invoked, then this routine is a harmless no-op.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void){
+SQLITE_API int sqlite3_shutdown(void){
#ifdef SQLITE_OMIT_WSD
int rc = sqlite3_wsd_init(4096, 24);
if( rc!=SQLITE_OK ){
** threadsafe. Failure to heed these warnings can lead to unpredictable
** behavior.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_config(int op, ...){
+SQLITE_API int sqlite3_config(int op, ...){
va_list ap;
int rc = SQLITE_OK;
sqlite3GlobalConfig.bMemstat = va_arg(ap, int);
break;
}
- case SQLITE_CONFIG_SCRATCH: {
- /* EVIDENCE-OF: R-08404-60887 There are three arguments to
- ** SQLITE_CONFIG_SCRATCH: A pointer an 8-byte aligned memory buffer from
- ** which the scratch allocations will be drawn, the size of each scratch
- ** allocation (sz), and the maximum number of scratch allocations (N). */
- sqlite3GlobalConfig.pScratch = va_arg(ap, void*);
- sqlite3GlobalConfig.szScratch = va_arg(ap, int);
- sqlite3GlobalConfig.nScratch = va_arg(ap, int);
+ case SQLITE_CONFIG_SMALL_MALLOC: {
+ sqlite3GlobalConfig.bSmallMalloc = va_arg(ap, int);
break;
}
case SQLITE_CONFIG_PAGECACHE: {
- /* EVIDENCE-OF: R-31408-40510 There are three arguments to
- ** SQLITE_CONFIG_PAGECACHE: A pointer to 8-byte aligned memory, the size
- ** of each page buffer (sz), and the number of pages (N). */
+ /* EVIDENCE-OF: R-18761-36601 There are three arguments to
+ ** SQLITE_CONFIG_PAGECACHE: A pointer to 8-byte aligned memory (pMem),
+ ** the size of each page cache line (sz), and the number of cache lines
+ ** (N). */
sqlite3GlobalConfig.pPage = va_arg(ap, void*);
sqlite3GlobalConfig.szPage = va_arg(ap, int);
sqlite3GlobalConfig.nPage = va_arg(ap, int);
break;
}
+ case SQLITE_CONFIG_STMTJRNL_SPILL: {
+ sqlite3GlobalConfig.nStmtSpill = va_arg(ap, int);
+ break;
+ }
+
default: {
rc = SQLITE_ERROR;
break;
static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){
#ifndef SQLITE_OMIT_LOOKASIDE
void *pStart;
- if( db->lookaside.nOut ){
+
+ if( sqlite3LookasideUsed(db,0)>0 ){
return SQLITE_BUSY;
}
/* Free any existing lookaside buffer for this handle before
pStart = pBuf;
}
db->lookaside.pStart = pStart;
+ db->lookaside.pInit = 0;
db->lookaside.pFree = 0;
db->lookaside.sz = (u16)sz;
if( pStart ){
int i;
LookasideSlot *p;
assert( sz > (int)sizeof(LookasideSlot*) );
+ db->lookaside.nSlot = cnt;
p = (LookasideSlot*)pStart;
for(i=cnt-1; i>=0; i--){
- p->pNext = db->lookaside.pFree;
- db->lookaside.pFree = p;
+ p->pNext = db->lookaside.pInit;
+ db->lookaside.pInit = p;
p = (LookasideSlot*)&((u8*)p)[sz];
}
db->lookaside.pEnd = p;
- db->lookaside.bEnabled = 1;
+ db->lookaside.bDisable = 0;
db->lookaside.bMalloced = pBuf==0 ?1:0;
}else{
db->lookaside.pStart = db;
db->lookaside.pEnd = db;
- db->lookaside.bEnabled = 0;
+ db->lookaside.bDisable = 1;
db->lookaside.bMalloced = 0;
+ db->lookaside.nSlot = 0;
}
#endif /* SQLITE_OMIT_LOOKASIDE */
return SQLITE_OK;
/*
** Return the mutex associated with a database connection.
*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3 *db){
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
** Free up as much memory as we can from the given database
** connection.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3 *db){
+SQLITE_API int sqlite3_db_release_memory(sqlite3 *db){
int i;
#ifdef SQLITE_ENABLE_API_ARMOR
return SQLITE_OK;
}
+/*
+** Flush any dirty pages in the pager-cache for any attached database
+** to disk.
+*/
+SQLITE_API int sqlite3_db_cacheflush(sqlite3 *db){
+ int i;
+ int rc = SQLITE_OK;
+ int bSeenBusy = 0;
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
+#endif
+ sqlite3_mutex_enter(db->mutex);
+ sqlite3BtreeEnterAll(db);
+ for(i=0; rc==SQLITE_OK && i<db->nDb; i++){
+ Btree *pBt = db->aDb[i].pBt;
+ if( pBt && sqlite3BtreeIsInTrans(pBt) ){
+ Pager *pPager = sqlite3BtreePager(pBt);
+ rc = sqlite3PagerFlush(pPager);
+ if( rc==SQLITE_BUSY ){
+ bSeenBusy = 1;
+ rc = SQLITE_OK;
+ }
+ }
+ }
+ sqlite3BtreeLeaveAll(db);
+ sqlite3_mutex_leave(db->mutex);
+ return ((rc==SQLITE_OK && bSeenBusy) ? SQLITE_BUSY : rc);
+}
+
/*
** Configuration settings for an individual database connection
*/
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3 *db, int op, ...){
+SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){
va_list ap;
int rc;
va_start(ap, op);
switch( op ){
+ case SQLITE_DBCONFIG_MAINDBNAME: {
+ /* IMP: R-06824-28531 */
+ /* IMP: R-36257-52125 */
+ db->aDb[0].zDbSName = va_arg(ap,char*);
+ rc = SQLITE_OK;
+ break;
+ }
case SQLITE_DBCONFIG_LOOKASIDE: {
void *pBuf = va_arg(ap, void*); /* IMP: R-26835-10964 */
int sz = va_arg(ap, int); /* IMP: R-47871-25994 */
int op; /* The opcode */
u32 mask; /* Mask of the bit in sqlite3.flags to set/clear */
} aFlagOp[] = {
- { SQLITE_DBCONFIG_ENABLE_FKEY, SQLITE_ForeignKeys },
- { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger },
+ { SQLITE_DBCONFIG_ENABLE_FKEY, SQLITE_ForeignKeys },
+ { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger },
+ { SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, SQLITE_Fts3Tokenizer },
+ { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension },
+ { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE, SQLITE_NoCkptOnClose },
+ { SQLITE_DBCONFIG_ENABLE_QPSG, SQLITE_EnableQPSG },
+ { SQLITE_DBCONFIG_TRIGGER_EQP, SQLITE_TriggerEQP },
};
unsigned int i;
rc = SQLITE_ERROR; /* IMP: R-42790-23372 */
if( aFlagOp[i].op==op ){
int onoff = va_arg(ap, int);
int *pRes = va_arg(ap, int*);
- int oldFlags = db->flags;
+ u32 oldFlags = db->flags;
if( onoff>0 ){
db->flags |= aFlagOp[i].mask;
}else if( onoff==0 ){
/* EVIDENCE-OF: R-65033-28449 The built-in BINARY collation compares
** strings byte by byte using the memcmp() function from the standard C
** library. */
+ assert( pKey1 && pKey2 );
rc = memcmp(pKey1, pKey2, n);
if( rc==0 ){
if( padFlag
/*
** Return the ROWID of the most recent insert
*/
-SQLITE_API sqlite_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3 *db){
+SQLITE_API sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
return db->lastRowid;
}
+/*
+** Set the value returned by the sqlite3_last_insert_rowid() API function.
+*/
+SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3 *db, sqlite3_int64 iRowid){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ (void)SQLITE_MISUSE_BKPT;
+ return;
+ }
+#endif
+ sqlite3_mutex_enter(db->mutex);
+ db->lastRowid = iRowid;
+ sqlite3_mutex_leave(db->mutex);
+}
+
/*
** Return the number of changes in the most recent call to sqlite3_exec().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3 *db){
+SQLITE_API int sqlite3_changes(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
/*
** Return the number of changes since the database handle was opened.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3 *db){
+SQLITE_API int sqlite3_total_changes(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
** with SQLITE_ANY as the encoding.
*/
static void functionDestroy(sqlite3 *db, FuncDef *p){
- FuncDestructor *pDestructor = p->pDestructor;
+ FuncDestructor *pDestructor = p->u.pDestructor;
if( pDestructor ){
pDestructor->nRef--;
if( pDestructor->nRef==0 ){
return SQLITE_MISUSE_BKPT;
}
sqlite3_mutex_enter(db->mutex);
+ if( db->mTrace & SQLITE_TRACE_CLOSE ){
+ db->xTrace(SQLITE_TRACE_CLOSE, db->pTraceArg, db, 0);
+ }
/* Force xDisconnect calls on all virtual tables */
disconnectAllVtab(db);
** unclosed resources, and arranges for deallocation when the last
** prepare statement or sqlite3_backup closes.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); }
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); }
+SQLITE_API int sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); }
+SQLITE_API int sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); }
/*
*/
sqlite3ConnectionClosed(db);
- for(j=0; j<ArraySize(db->aFunc.a); j++){
- FuncDef *pNext, *pHash, *p;
- for(p=db->aFunc.a[j]; p; p=pHash){
- pHash = p->pHash;
- while( p ){
- functionDestroy(db, p);
- pNext = p->pNext;
- sqlite3DbFree(db, p);
- p = pNext;
- }
- }
+ for(i=sqliteHashFirst(&db->aFunc); i; i=sqliteHashNext(i)){
+ FuncDef *pNext, *p;
+ p = sqliteHashData(i);
+ do{
+ functionDestroy(db, p);
+ pNext = p->pNext;
+ sqlite3DbFree(db, p);
+ p = pNext;
+ }while( p );
}
+ sqlite3HashClear(&db->aFunc);
for(i=sqliteHashFirst(&db->aCollSeq); i; i=sqliteHashNext(i)){
CollSeq *pColl = (CollSeq *)sqliteHashData(i);
/* Invoke any destructors registered for collation sequence user data. */
sqlite3_mutex_leave(db->mutex);
db->magic = SQLITE_MAGIC_CLOSED;
sqlite3_mutex_free(db->mutex);
- assert( db->lookaside.nOut==0 ); /* Fails on a lookaside memory leak */
+ assert( sqlite3LookasideUsed(db,0)==0 );
if( db->lookaside.bMalloced ){
sqlite3_free(db->lookaside.pStart);
}
** the database rollback and schema reset, which can cause false
** corruption reports in some cases. */
sqlite3BtreeEnterAll(db);
- schemaChange = (db->flags & SQLITE_InternChanges)!=0 && db->init.busy==0;
+ schemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0 && db->init.busy==0;
for(i=0; i<db->nDb; i++){
Btree *p = db->aDb[i].pBt;
sqlite3VtabRollback(db);
sqlite3EndBenignMalloc();
- if( (db->flags&SQLITE_InternChanges)!=0 && db->init.busy==0 ){
+ if( (db->mDbFlags&DBFLAG_SchemaChange)!=0 && db->init.busy==0 ){
sqlite3ExpirePreparedStatements(db);
sqlite3ResetAllSchemasOfConnection(db);
}
case SQLITE_NOMEM: zName = "SQLITE_NOMEM"; break;
case SQLITE_READONLY: zName = "SQLITE_READONLY"; break;
case SQLITE_READONLY_RECOVERY: zName = "SQLITE_READONLY_RECOVERY"; break;
- case SQLITE_READONLY_CANTLOCK: zName = "SQLITE_READONLY_CANTLOCK"; break;
+ case SQLITE_READONLY_CANTINIT: zName = "SQLITE_READONLY_CANTINIT"; break;
case SQLITE_READONLY_ROLLBACK: zName = "SQLITE_READONLY_ROLLBACK"; break;
case SQLITE_READONLY_DBMOVED: zName = "SQLITE_READONLY_DBMOVED"; break;
+ case SQLITE_READONLY_DIRECTORY: zName = "SQLITE_READONLY_DIRECTORY";break;
case SQLITE_INTERRUPT: zName = "SQLITE_INTERRUPT"; break;
case SQLITE_IOERR: zName = "SQLITE_IOERR"; break;
case SQLITE_IOERR_READ: zName = "SQLITE_IOERR_READ"; break;
SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){
static const char* const aMsg[] = {
/* SQLITE_OK */ "not an error",
- /* SQLITE_ERROR */ "SQL logic error or missing database",
+ /* SQLITE_ERROR */ "SQL logic error",
/* SQLITE_INTERNAL */ 0,
/* SQLITE_PERM */ "access permission denied",
- /* SQLITE_ABORT */ "callback requested query abort",
+ /* SQLITE_ABORT */ "query aborted",
/* SQLITE_BUSY */ "database is locked",
/* SQLITE_LOCKED */ "database table is locked",
/* SQLITE_NOMEM */ "out of memory",
/* SQLITE_FULL */ "database or disk is full",
/* SQLITE_CANTOPEN */ "unable to open database file",
/* SQLITE_PROTOCOL */ "locking protocol",
- /* SQLITE_EMPTY */ "table contains no data",
+ /* SQLITE_EMPTY */ 0,
/* SQLITE_SCHEMA */ "database schema has changed",
/* SQLITE_TOOBIG */ "string or blob too big",
/* SQLITE_CONSTRAINT */ "constraint failed",
/* SQLITE_MISMATCH */ "datatype mismatch",
- /* SQLITE_MISUSE */ "library routine called out of sequence",
+ /* SQLITE_MISUSE */ "bad parameter or other API misuse",
+#ifdef SQLITE_DISABLE_LFS
/* SQLITE_NOLFS */ "large file support is disabled",
+#else
+ /* SQLITE_NOLFS */ 0,
+#endif
/* SQLITE_AUTH */ "authorization denied",
- /* SQLITE_FORMAT */ "auxiliary database format error",
- /* SQLITE_RANGE */ "bind or column index out of range",
- /* SQLITE_NOTADB */ "file is encrypted or is not a database",
+ /* SQLITE_FORMAT */ 0,
+ /* SQLITE_RANGE */ "column index out of range",
+ /* SQLITE_NOTADB */ "file is not a database",
+ /* SQLITE_NOTICE */ "notification message",
+ /* SQLITE_WARNING */ "warning message",
};
const char *zErr = "unknown error";
switch( rc ){
zErr = "abort due to ROLLBACK";
break;
}
+ case SQLITE_ROW: {
+ zErr = "another row available";
+ break;
+ }
+ case SQLITE_DONE: {
+ zErr = "no more rows available";
+ break;
+ }
default: {
rc &= 0xff;
if( ALWAYS(rc>=0) && rc<ArraySize(aMsg) && aMsg[rc]!=0 ){
** again until a timeout value is reached. The timeout value is
** an integer number of milliseconds passed in as the first
** argument.
+**
+** Return non-zero to retry the lock. Return zero to stop trying
+** and cause SQLite to return SQLITE_BUSY.
*/
static int sqliteDefaultBusyCallback(
- void *ptr, /* Database connection */
- int count /* Number of times table has been busy */
+ void *ptr, /* Database connection */
+ int count, /* Number of times table has been busy */
+ sqlite3_file *pFile /* The file on which the lock occurred */
){
#if SQLITE_OS_WIN || HAVE_USLEEP
+ /* This case is for systems that have support for sleeping for fractions of
+ ** a second. Examples: All windows systems, unix systems with usleep() */
static const u8 delays[] =
{ 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 };
static const u8 totals[] =
{ 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 };
# define NDELAY ArraySize(delays)
sqlite3 *db = (sqlite3 *)ptr;
- int timeout = db->busyTimeout;
+ int tmout = db->busyTimeout;
int delay, prior;
+#ifdef SQLITE_ENABLE_SETLK_TIMEOUT
+ if( sqlite3OsFileControl(pFile,SQLITE_FCNTL_LOCK_TIMEOUT,&tmout)==SQLITE_OK ){
+ if( count ){
+ tmout = 0;
+ sqlite3OsFileControl(pFile, SQLITE_FCNTL_LOCK_TIMEOUT, &tmout);
+ return 0;
+ }else{
+ return 1;
+ }
+ }
+#else
+ UNUSED_PARAMETER(pFile);
+#endif
assert( count>=0 );
if( count < NDELAY ){
delay = delays[count];
delay = delays[NDELAY-1];
prior = totals[NDELAY-1] + delay*(count-(NDELAY-1));
}
- if( prior + delay > timeout ){
- delay = timeout - prior;
+ if( prior + delay > tmout ){
+ delay = tmout - prior;
if( delay<=0 ) return 0;
}
sqlite3OsSleep(db->pVfs, delay*1000);
return 1;
#else
+ /* This case for unix systems that lack usleep() support. Sleeping
+ ** must be done in increments of whole seconds */
sqlite3 *db = (sqlite3 *)ptr;
- int timeout = ((sqlite3 *)ptr)->busyTimeout;
- if( (count+1)*1000 > timeout ){
+ int tmout = ((sqlite3 *)ptr)->busyTimeout;
+ UNUSED_PARAMETER(pFile);
+ if( (count+1)*1000 > tmout ){
return 0;
}
sqlite3OsSleep(db->pVfs, 1000000);
/*
** Invoke the given busy handler.
**
-** This routine is called when an operation failed with a lock.
+** This routine is called when an operation failed to acquire a
+** lock on VFS file pFile.
+**
** If this routine returns non-zero, the lock is retried. If it
** returns 0, the operation aborts with an SQLITE_BUSY error.
*/
-SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p){
+SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p, sqlite3_file *pFile){
int rc;
- if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0;
- rc = p->xFunc(p->pArg, p->nBusy);
+ if( p->xBusyHandler==0 || p->nBusy<0 ) return 0;
+ if( p->bExtraFileArg ){
+ /* Add an extra parameter with the pFile pointer to the end of the
+ ** callback argument list */
+ int (*xTra)(void*,int,sqlite3_file*);
+ xTra = (int(*)(void*,int,sqlite3_file*))p->xBusyHandler;
+ rc = xTra(p->pBusyArg, p->nBusy, pFile);
+ }else{
+ /* Legacy style busy handler callback */
+ rc = p->xBusyHandler(p->pBusyArg, p->nBusy);
+ }
if( rc==0 ){
p->nBusy = -1;
}else{
** This routine sets the busy callback for an Sqlite database to the
** given callback function with the given argument.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(
+SQLITE_API int sqlite3_busy_handler(
sqlite3 *db,
int (*xBusy)(void*,int),
void *pArg
if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
#endif
sqlite3_mutex_enter(db->mutex);
- db->busyHandler.xFunc = xBusy;
- db->busyHandler.pArg = pArg;
+ db->busyHandler.xBusyHandler = xBusy;
+ db->busyHandler.pBusyArg = pArg;
db->busyHandler.nBusy = 0;
+ db->busyHandler.bExtraFileArg = 0;
db->busyTimeout = 0;
sqlite3_mutex_leave(db->mutex);
return SQLITE_OK;
** given callback function with the given argument. The progress callback will
** be invoked every nOps opcodes.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(
+SQLITE_API void sqlite3_progress_handler(
sqlite3 *db,
int nOps,
int (*xProgress)(void*),
** This routine installs a default busy handler that waits for the
** specified number of milliseconds before returning 0.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3 *db, int ms){
+SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
#endif
if( ms>0 ){
- sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db);
+ sqlite3_busy_handler(db, (int(*)(void*,int))sqliteDefaultBusyCallback,
+ (void*)db);
db->busyTimeout = ms;
+ db->busyHandler.bExtraFileArg = 1;
}else{
sqlite3_busy_handler(db, 0, 0);
}
/*
** Cause any pending operation to stop at its earliest opportunity.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3 *db){
+SQLITE_API void sqlite3_interrupt(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
- if( !sqlite3SafetyCheckOk(db) ){
+ if( !sqlite3SafetyCheckOk(db) && (db==0 || db->magic!=SQLITE_MAGIC_ZOMBIE) ){
(void)SQLITE_MISUSE_BKPT;
return;
}
int nArg,
int enc,
void *pUserData,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value **),
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value **),
void (*xStep)(sqlite3_context*,int,sqlite3_value **),
void (*xFinal)(sqlite3_context*),
FuncDestructor *pDestructor
assert( sqlite3_mutex_held(db->mutex) );
if( zFunctionName==0 ||
- (xFunc && (xFinal || xStep)) ||
- (!xFunc && (xFinal && !xStep)) ||
- (!xFunc && (!xFinal && xStep)) ||
+ (xSFunc && (xFinal || xStep)) ||
+ (!xSFunc && (xFinal && !xStep)) ||
+ (!xSFunc && (!xFinal && xStep)) ||
(nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) ||
(255<(nName = sqlite3Strlen30( zFunctionName))) ){
return SQLITE_MISUSE_BKPT;
}else if( enc==SQLITE_ANY ){
int rc;
rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF8|extraFlags,
- pUserData, xFunc, xStep, xFinal, pDestructor);
+ pUserData, xSFunc, xStep, xFinal, pDestructor);
if( rc==SQLITE_OK ){
rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF16LE|extraFlags,
- pUserData, xFunc, xStep, xFinal, pDestructor);
+ pUserData, xSFunc, xStep, xFinal, pDestructor);
}
if( rc!=SQLITE_OK ){
return rc;
** is being overridden/deleted but there are no active VMs, allow the
** operation to continue but invalidate all precompiled statements.
*/
- p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 0);
+ p = sqlite3FindFunction(db, zFunctionName, nArg, (u8)enc, 0);
if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==enc && p->nArg==nArg ){
if( db->nVdbeActive ){
sqlite3ErrorWithMsg(db, SQLITE_BUSY,
}
}
- p = sqlite3FindFunction(db, zFunctionName, nName, nArg, (u8)enc, 1);
+ p = sqlite3FindFunction(db, zFunctionName, nArg, (u8)enc, 1);
assert(p || db->mallocFailed);
if( !p ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
/* If an older version of the function with a configured destructor is
if( pDestructor ){
pDestructor->nRef++;
}
- p->pDestructor = pDestructor;
+ p->u.pDestructor = pDestructor;
p->funcFlags = (p->funcFlags & SQLITE_FUNC_ENCMASK) | extraFlags;
testcase( p->funcFlags & SQLITE_DETERMINISTIC );
- p->xFunc = xFunc;
- p->xStep = xStep;
+ p->xSFunc = xSFunc ? xSFunc : xStep;
p->xFinalize = xFinal;
p->pUserData = pUserData;
p->nArg = (u16)nArg;
/*
** Create new user functions.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
sqlite3 *db,
const char *zFunc,
int nArg,
int enc,
void *p,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value **),
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value **),
void (*xStep)(sqlite3_context*,int,sqlite3_value **),
void (*xFinal)(sqlite3_context*)
){
- return sqlite3_create_function_v2(db, zFunc, nArg, enc, p, xFunc, xStep,
+ return sqlite3_create_function_v2(db, zFunc, nArg, enc, p, xSFunc, xStep,
xFinal, 0);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
sqlite3 *db,
const char *zFunc,
int nArg,
int enc,
void *p,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value **),
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value **),
void (*xStep)(sqlite3_context*,int,sqlite3_value **),
void (*xFinal)(sqlite3_context*),
void (*xDestroy)(void *)
pArg->xDestroy = xDestroy;
pArg->pUserData = p;
}
- rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, xFunc, xStep, xFinal, pArg);
+ rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, xSFunc, xStep, xFinal, pArg);
if( pArg && pArg->nRef==0 ){
assert( rc!=SQLITE_OK );
xDestroy(p);
}
#ifndef SQLITE_OMIT_UTF16
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
sqlite3 *db,
const void *zFunctionName,
int nArg,
int eTextRep,
void *p,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+ void (*xSFunc)(sqlite3_context*,int,sqlite3_value**),
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
){
sqlite3_mutex_enter(db->mutex);
assert( !db->mallocFailed );
zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE);
- rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xFunc, xStep, xFinal,0);
+ rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xSFunc,xStep,xFinal,0);
sqlite3DbFree(db, zFunc8);
rc = sqlite3ApiExit(db, rc);
sqlite3_mutex_leave(db->mutex);
** A global function must exist in order for name resolution to work
** properly.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(
+SQLITE_API int sqlite3_overload_function(
sqlite3 *db,
const char *zName,
int nArg
){
- int nName = sqlite3Strlen30(zName);
int rc = SQLITE_OK;
#ifdef SQLITE_ENABLE_API_ARMOR
}
#endif
sqlite3_mutex_enter(db->mutex);
- if( sqlite3FindFunction(db, zName, nName, nArg, SQLITE_UTF8, 0)==0 ){
+ if( sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)==0 ){
rc = sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8,
0, sqlite3InvalidFunction, 0, 0, 0);
}
** trace is a pointer to a function that is invoked at the start of each
** SQL statement.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3 *db, void (*xTrace)(void*,const char*), void *pArg){
+#ifndef SQLITE_OMIT_DEPRECATED
+SQLITE_API void *sqlite3_trace(sqlite3 *db, void(*xTrace)(void*,const char*), void *pArg){
void *pOld;
#ifdef SQLITE_ENABLE_API_ARMOR
#endif
sqlite3_mutex_enter(db->mutex);
pOld = db->pTraceArg;
- db->xTrace = xTrace;
+ db->mTrace = xTrace ? SQLITE_TRACE_LEGACY : 0;
+ db->xTrace = (int(*)(u32,void*,void*,void*))xTrace;
db->pTraceArg = pArg;
sqlite3_mutex_leave(db->mutex);
return pOld;
}
+#endif /* SQLITE_OMIT_DEPRECATED */
+
+/* Register a trace callback using the version-2 interface.
+*/
+SQLITE_API int sqlite3_trace_v2(
+ sqlite3 *db, /* Trace this connection */
+ unsigned mTrace, /* Mask of events to be traced */
+ int(*xTrace)(unsigned,void*,void*,void*), /* Callback to invoke */
+ void *pArg /* Context */
+){
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ return SQLITE_MISUSE_BKPT;
+ }
+#endif
+ sqlite3_mutex_enter(db->mutex);
+ if( mTrace==0 ) xTrace = 0;
+ if( xTrace==0 ) mTrace = 0;
+ db->mTrace = mTrace;
+ db->xTrace = xTrace;
+ db->pTraceArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_OK;
+}
+
+#ifndef SQLITE_OMIT_DEPRECATED
/*
** Register a profile function. The pArg from the previously registered
** profile function is returned.
** profile is a pointer to a function that is invoked at the conclusion of
** each SQL statement that is run.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_profile(
+SQLITE_API void *sqlite3_profile(
sqlite3 *db,
void (*xProfile)(void*,const char*,sqlite_uint64),
void *pArg
sqlite3_mutex_leave(db->mutex);
return pOld;
}
+#endif /* SQLITE_OMIT_DEPRECATED */
#endif /* SQLITE_OMIT_TRACE */
/*
** If the invoked function returns non-zero, then the commit becomes a
** rollback.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(
+SQLITE_API void *sqlite3_commit_hook(
sqlite3 *db, /* Attach the hook to this database */
int (*xCallback)(void*), /* Function to invoke on each commit */
void *pArg /* Argument to the function */
** Register a callback to be invoked each time a row is updated,
** inserted or deleted using this database connection.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
sqlite3 *db, /* Attach the hook to this database */
void (*xCallback)(void*,int,char const *,char const *,sqlite_int64),
void *pArg /* Argument to the function */
** Register a callback to be invoked each time a transaction is rolled
** back by this database connection.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(
+SQLITE_API void *sqlite3_rollback_hook(
sqlite3 *db, /* Attach the hook to this database */
void (*xCallback)(void*), /* Callback function */
void *pArg /* Argument to the function */
return pRet;
}
+#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
+/*
+** Register a callback to be invoked each time a row is updated,
+** inserted or deleted using this database connection.
+*/
+SQLITE_API void *sqlite3_preupdate_hook(
+ sqlite3 *db, /* Attach the hook to this database */
+ void(*xCallback)( /* Callback function */
+ void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64),
+ void *pArg /* First callback argument */
+){
+ void *pRet;
+ sqlite3_mutex_enter(db->mutex);
+ pRet = db->pPreUpdateArg;
+ db->xPreUpdateCallback = xCallback;
+ db->pPreUpdateArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pRet;
+}
+#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
+
#ifndef SQLITE_OMIT_WAL
/*
** The sqlite3_wal_hook() callback registered by sqlite3_wal_autocheckpoint().
** using sqlite3_wal_hook() disables the automatic checkpoint mechanism
** configured by this function.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){
#ifdef SQLITE_OMIT_WAL
UNUSED_PARAMETER(db);
UNUSED_PARAMETER(nFrame);
** Register a callback to be invoked each time a transaction is written
** into the write-ahead-log by this database connection.
*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
sqlite3 *db, /* Attach the hook to this db handle */
int(*xCallback)(void *, sqlite3*, const char*, int),
void *pArg /* First argument passed to xCallback() */
/*
** Checkpoint database zDb.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
sqlite3 *db, /* Database handle */
const char *zDb, /* Name of attached database (or NULL) */
int eMode, /* SQLITE_CHECKPOINT_* value */
sqlite3Error(db, rc);
}
rc = sqlite3ApiExit(db, rc);
+
+ /* If there are no active statements, clear the interrupt flag at this
+ ** point. */
+ if( db->nVdbeActive==0 ){
+ db->u1.isInterrupted = 0;
+ }
+
sqlite3_mutex_leave(db->mutex);
return rc;
#endif
** to contains a zero-length string, all attached databases are
** checkpointed.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){
/* EVIDENCE-OF: R-41613-20553 The sqlite3_wal_checkpoint(D,X) is equivalent to
** sqlite3_wal_checkpoint_v2(D,X,SQLITE_CHECKPOINT_PASSIVE,0,0). */
return sqlite3_wal_checkpoint_v2(db,zDb,SQLITE_CHECKPOINT_PASSIVE,0,0);
** checkpointed. If an error is encountered it is returned immediately -
** no attempt is made to checkpoint any remaining databases.
**
-** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART.
+** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL, RESTART
+** or TRUNCATE.
*/
SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){
int rc = SQLITE_OK; /* Return code */
** Return UTF-8 encoded English language explanation of the most recent
** error.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3 *db){
+SQLITE_API const char *sqlite3_errmsg(sqlite3 *db){
const char *z;
if( !db ){
- return sqlite3ErrStr(SQLITE_NOMEM);
+ return sqlite3ErrStr(SQLITE_NOMEM_BKPT);
}
if( !sqlite3SafetyCheckSickOrOk(db) ){
return sqlite3ErrStr(SQLITE_MISUSE_BKPT);
}
sqlite3_mutex_enter(db->mutex);
if( db->mallocFailed ){
- z = sqlite3ErrStr(SQLITE_NOMEM);
+ z = sqlite3ErrStr(SQLITE_NOMEM_BKPT);
}else{
testcase( db->pErr==0 );
z = (char*)sqlite3_value_text(db->pErr);
** Return UTF-16 encoded English language explanation of the most recent
** error.
*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3 *db){
+SQLITE_API const void *sqlite3_errmsg16(sqlite3 *db){
static const u16 outOfMem[] = {
'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0
};
static const u16 misuse[] = {
- 'l', 'i', 'b', 'r', 'a', 'r', 'y', ' ',
- 'r', 'o', 'u', 't', 'i', 'n', 'e', ' ',
- 'c', 'a', 'l', 'l', 'e', 'd', ' ',
- 'o', 'u', 't', ' ',
- 'o', 'f', ' ',
- 's', 'e', 'q', 'u', 'e', 'n', 'c', 'e', 0
+ 'b', 'a', 'd', ' ', 'p', 'a', 'r', 'a', 'm', 'e', 't', 'e', 'r', ' ',
+ 'o', 'r', ' ', 'o', 't', 'h', 'e', 'r', ' ', 'A', 'P', 'I', ' ',
+ 'm', 'i', 's', 'u', 's', 'e', 0
};
const void *z;
** be cleared before returning. Do this directly, instead of via
** sqlite3ApiExit(), to avoid setting the database handle error message.
*/
- db->mallocFailed = 0;
+ sqlite3OomClear(db);
}
sqlite3_mutex_leave(db->mutex);
return z;
** Return the most recent error code generated by an SQLite routine. If NULL is
** passed to this function, we assume a malloc() failed during sqlite3_open().
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db){
+SQLITE_API int sqlite3_errcode(sqlite3 *db){
if( db && !sqlite3SafetyCheckSickOrOk(db) ){
return SQLITE_MISUSE_BKPT;
}
if( !db || db->mallocFailed ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
return db->errCode & db->errMask;
}
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db){
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db){
if( db && !sqlite3SafetyCheckSickOrOk(db) ){
return SQLITE_MISUSE_BKPT;
}
if( !db || db->mallocFailed ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}
return db->errCode;
}
+SQLITE_API int sqlite3_system_errno(sqlite3 *db){
+ return db ? db->iSysErrno : 0;
+}
/*
** Return a string that describes the kind of error specified in the
** argument. For now, this simply calls the internal sqlite3ErrStr()
** function.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int rc){
+SQLITE_API const char *sqlite3_errstr(int rc){
return sqlite3ErrStr(rc);
}
}
pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 1);
- if( pColl==0 ) return SQLITE_NOMEM;
+ if( pColl==0 ) return SQLITE_NOMEM_BKPT;
pColl->xCmp = xCompare;
pColl->pUser = pCtx;
pColl->xDel = xDel;
#if SQLITE_MAX_VDBE_OP<40
# error SQLITE_MAX_VDBE_OP must be at least 40
#endif
-#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>1000
-# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 1000
+#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>127
+# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 127
#endif
#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>125
# error SQLITE_MAX_ATTACHED must be between 0 and 125
** It merely prevents new constructs that exceed the limit
** from forming.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3 *db, int limitId, int newLimit){
+SQLITE_API int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){
int oldLimit;
#ifdef SQLITE_ENABLE_API_ARMOR
for(iIn=0; iIn<nUri; iIn++) nByte += (zUri[iIn]=='&');
zFile = sqlite3_malloc64(nByte);
- if( !zFile ) return SQLITE_NOMEM;
+ if( !zFile ) return SQLITE_NOMEM_BKPT;
iIn = 5;
#ifdef SQLITE_ALLOW_URI_AUTHORITY
assert( octet>=0 && octet<256 );
if( octet==0 ){
+#ifndef SQLITE_ENABLE_URI_00_ERROR
/* This branch is taken when "%00" appears within the URI. In this
** case we ignore all text in the remainder of the path, name or
** value currently being parsed. So ignore the current character
iIn++;
}
continue;
+#else
+ /* If ENABLE_URI_00_ERROR is defined, "%00" in a URI is an error. */
+ *pzErrMsg = sqlite3_mprintf("unexpected %%00 in uri");
+ rc = SQLITE_ERROR;
+ goto parse_uri_out;
+#endif
}
c = octet;
}else if( eState==1 && (c=='&' || c=='=') ){
}else{
zFile = sqlite3_malloc64(nUri+2);
- if( !zFile ) return SQLITE_NOMEM;
- memcpy(zFile, zUri, nUri);
+ if( !zFile ) return SQLITE_NOMEM_BKPT;
+ if( nUri ){
+ memcpy(zFile, zUri, nUri);
+ }
zFile[nUri] = '\0';
zFile[nUri+1] = '\0';
flags &= ~SQLITE_OPEN_URI;
if( rc ) return rc;
#endif
- /* Only allow sensible combinations of bits in the flags argument.
- ** Throw an error if any non-sense combination is used. If we
- ** do not block illegal combinations here, it could trigger
- ** assert() statements in deeper layers. Sensible combinations
- ** are:
- **
- ** 1: SQLITE_OPEN_READONLY
- ** 2: SQLITE_OPEN_READWRITE
- ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE
- */
- assert( SQLITE_OPEN_READONLY == 0x01 );
- assert( SQLITE_OPEN_READWRITE == 0x02 );
- assert( SQLITE_OPEN_CREATE == 0x04 );
- testcase( (1<<(flags&7))==0x02 ); /* READONLY */
- testcase( (1<<(flags&7))==0x04 ); /* READWRITE */
- testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */
- if( ((1<<(flags&7)) & 0x46)==0 ){
- return SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */
- }
-
if( sqlite3GlobalConfig.bCoreMutex==0 ){
isThreadsafe = 0;
}else if( flags & SQLITE_OPEN_NOMUTEX ){
}else{
isThreadsafe = sqlite3GlobalConfig.bFullMutex;
}
+
if( flags & SQLITE_OPEN_PRIVATECACHE ){
flags &= ~SQLITE_OPEN_SHAREDCACHE;
}else if( sqlite3GlobalConfig.sharedCacheEnabled ){
/* Allocate the sqlite data structure */
db = sqlite3MallocZero( sizeof(sqlite3) );
if( db==0 ) goto opendb_out;
- if( isThreadsafe ){
+ if( isThreadsafe
+#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS
+ || sqlite3GlobalConfig.bCoreMutex
+#endif
+ ){
db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE);
if( db->mutex==0 ){
sqlite3_free(db);
db = 0;
goto opendb_out;
}
+ if( isThreadsafe==0 ){
+ sqlite3MutexWarnOnContention(db->mutex);
+ }
}
sqlite3_mutex_enter(db->mutex);
db->errMask = 0xff;
#endif
#if defined(SQLITE_ENABLE_OVERSIZE_CELL_CHECK)
| SQLITE_CellSizeCk
+#endif
+#if defined(SQLITE_ENABLE_FTS3_TOKENIZER)
+ | SQLITE_Fts3Tokenizer
+#endif
+#if defined(SQLITE_ENABLE_QPSG)
+ | SQLITE_EnableQPSG
#endif
;
sqlite3HashInit(&db->aCollSeq);
** EVIDENCE-OF: R-52786-44878 SQLite defines three built-in collating
** functions:
*/
- createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc, 0);
- createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc, 0);
- createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc, 0);
+ createCollation(db, sqlite3StrBINARY, SQLITE_UTF8, 0, binCollFunc, 0);
+ createCollation(db, sqlite3StrBINARY, SQLITE_UTF16BE, 0, binCollFunc, 0);
+ createCollation(db, sqlite3StrBINARY, SQLITE_UTF16LE, 0, binCollFunc, 0);
createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0);
createCollation(db, "RTRIM", SQLITE_UTF8, (void*)1, binCollFunc, 0);
if( db->mallocFailed ){
/* EVIDENCE-OF: R-08308-17224 The default collating function for all
** strings is BINARY.
*/
- db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 0);
+ db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, sqlite3StrBINARY, 0);
assert( db->pDfltColl!=0 );
- /* Parse the filename/URI argument. */
+ /* Parse the filename/URI argument
+ **
+ ** Only allow sensible combinations of bits in the flags argument.
+ ** Throw an error if any non-sense combination is used. If we
+ ** do not block illegal combinations here, it could trigger
+ ** assert() statements in deeper layers. Sensible combinations
+ ** are:
+ **
+ ** 1: SQLITE_OPEN_READONLY
+ ** 2: SQLITE_OPEN_READWRITE
+ ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE
+ */
db->openFlags = flags;
- rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg);
+ assert( SQLITE_OPEN_READONLY == 0x01 );
+ assert( SQLITE_OPEN_READWRITE == 0x02 );
+ assert( SQLITE_OPEN_CREATE == 0x04 );
+ testcase( (1<<(flags&7))==0x02 ); /* READONLY */
+ testcase( (1<<(flags&7))==0x04 ); /* READWRITE */
+ testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */
+ if( ((1<<(flags&7)) & 0x46)==0 ){
+ rc = SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */
+ }else{
+ rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg);
+ }
if( rc!=SQLITE_OK ){
- if( rc==SQLITE_NOMEM ) db->mallocFailed = 1;
+ if( rc==SQLITE_NOMEM ) sqlite3OomFault(db);
sqlite3ErrorWithMsg(db, rc, zErrMsg ? "%s" : 0, zErrMsg);
sqlite3_free(zErrMsg);
goto opendb_out;
flags | SQLITE_OPEN_MAIN_DB);
if( rc!=SQLITE_OK ){
if( rc==SQLITE_IOERR_NOMEM ){
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
sqlite3Error(db, rc);
goto opendb_out;
sqlite3BtreeLeave(db->aDb[0].pBt);
db->aDb[1].pSchema = sqlite3SchemaGet(db, 0);
- /* The default safety_level for the main database is 'full'; for the temp
- ** database it is 'NONE'. This matches the pager layer defaults.
+ /* The default safety_level for the main database is FULL; for the temp
+ ** database it is OFF. This matches the pager layer defaults.
*/
- db->aDb[0].zName = "main";
- db->aDb[0].safety_level = 3;
- db->aDb[1].zName = "temp";
- db->aDb[1].safety_level = 1;
+ db->aDb[0].zDbSName = "main";
+ db->aDb[0].safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1;
+ db->aDb[1].zDbSName = "temp";
+ db->aDb[1].safety_level = PAGER_SYNCHRONOUS_OFF;
db->magic = SQLITE_MAGIC_OPEN;
if( db->mallocFailed ){
** is accessed.
*/
sqlite3Error(db, SQLITE_OK);
- sqlite3RegisterBuiltinFunctions(db);
+ sqlite3RegisterPerConnectionBuiltinFunctions(db);
+ rc = sqlite3_errcode(db);
+
+#ifdef SQLITE_ENABLE_FTS5
+ /* Register any built-in FTS5 module before loading the automatic
+ ** extensions. This allows automatic extensions to register FTS5
+ ** tokenizers and auxiliary functions. */
+ if( !db->mallocFailed && rc==SQLITE_OK ){
+ rc = sqlite3Fts5Init(db);
+ }
+#endif
/* Load automatic extensions - extensions that have been registered
** using the sqlite3_automatic_extension() API.
*/
- rc = sqlite3_errcode(db);
if( rc==SQLITE_OK ){
sqlite3AutoLoadExtensions(db);
rc = sqlite3_errcode(db);
}
#endif
-#ifdef SQLITE_ENABLE_FTS5
- if( !db->mallocFailed && rc==SQLITE_OK ){
- rc = sqlite3Fts5Init(db);
- }
-#endif
-
-#ifdef SQLITE_ENABLE_ICU
+#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS)
if( !db->mallocFailed && rc==SQLITE_OK ){
rc = sqlite3IcuInit(db);
}
}
#endif
+#ifdef SQLITE_ENABLE_DBPAGE_VTAB
+ if( !db->mallocFailed && rc==SQLITE_OK){
+ rc = sqlite3DbpageRegister(db);
+ }
+#endif
+
#ifdef SQLITE_ENABLE_DBSTAT_VTAB
if( !db->mallocFailed && rc==SQLITE_OK){
rc = sqlite3DbstatRegister(db);
}
#endif
+#ifdef SQLITE_ENABLE_STMTVTAB
+ if( !db->mallocFailed && rc==SQLITE_OK){
+ rc = sqlite3StmtVtabInit(db);
+ }
+#endif
+
/* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking
** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking
** mode. Doing nothing at all also makes NORMAL the default.
sqlite3_wal_autocheckpoint(db, SQLITE_DEFAULT_WAL_AUTOCHECKPOINT);
opendb_out:
- sqlite3_free(zOpen);
if( db ){
assert( db->mutex!=0 || isThreadsafe==0
|| sqlite3GlobalConfig.bFullMutex==0 );
sqlite3GlobalConfig.xSqllog(pArg, db, zFilename, 0);
}
#endif
+#if defined(SQLITE_HAS_CODEC)
+ if( rc==SQLITE_OK ){
+ const char *zKey;
+ if( (zKey = sqlite3_uri_parameter(zOpen, "hexkey"))!=0 && zKey[0] ){
+ u8 iByte;
+ int i;
+ char zDecoded[40];
+ for(i=0, iByte=0; i<sizeof(zDecoded)*2 && sqlite3Isxdigit(zKey[i]); i++){
+ iByte = (iByte<<4) + sqlite3HexToInt(zKey[i]);
+ if( (i&1)!=0 ) zDecoded[i/2] = iByte;
+ }
+ sqlite3_key_v2(db, 0, zDecoded, i/2);
+ }else if( (zKey = sqlite3_uri_parameter(zOpen, "key"))!=0 ){
+ sqlite3_key_v2(db, 0, zKey, sqlite3Strlen30(zKey));
+ }
+ }
+#endif
+ sqlite3_free(zOpen);
return rc & 0xff;
}
/*
** Open a new database handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
const char *zFilename,
sqlite3 **ppDb
){
return openDatabase(zFilename, ppDb,
SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0);
}
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb, /* OUT: SQLite db handle */
int flags, /* Flags */
/*
** Open a new database handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
const void *zFilename,
sqlite3 **ppDb
){
SCHEMA_ENC(*ppDb) = ENC(*ppDb) = SQLITE_UTF16NATIVE;
}
}else{
- rc = SQLITE_NOMEM;
+ rc = SQLITE_NOMEM_BKPT;
}
sqlite3ValueFree(pVal);
/*
** Register a new collation sequence with the database handle db.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
sqlite3* db,
const char *zName,
int enc,
/*
** Register a new collation sequence with the database handle db.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
sqlite3* db,
const char *zName,
int enc,
/*
** Register a new collation sequence with the database handle db.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
sqlite3* db,
const void *zName,
int enc,
** Register a collation sequence factory callback with the database handle
** db. Replace any previously installed collation sequence factory.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
sqlite3 *db,
void *pCollNeededArg,
void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*)
** Register a collation sequence factory callback with the database handle
** db. Replace any previously installed collation sequence factory.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
sqlite3 *db,
void *pCollNeededArg,
void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*)
** This function is now an anachronism. It used to be used to recover from a
** malloc() failure, but SQLite now does this automatically.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_global_recover(void){
+SQLITE_API int sqlite3_global_recover(void){
return SQLITE_OK;
}
#endif
** by default. Autocommit is disabled by a BEGIN statement and reenabled
** by the next COMMIT or ROLLBACK.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3 *db){
+SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
/*
** The following routines are substitutes for constants SQLITE_CORRUPT,
-** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_IOERR and possibly other error
+** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_NOMEM and possibly other error
** constants. They serve two purposes:
**
** 1. Serve as a convenient place to set a breakpoint in a debugger
** 2. Invoke sqlite3_log() to provide the source code location where
** a low-level error is first detected.
*/
+SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType){
+ sqlite3_log(iErr, "%s at line %d of [%.10s]",
+ zType, lineno, 20+sqlite3_sourceid());
+ return iErr;
+}
SQLITE_PRIVATE int sqlite3CorruptError(int lineno){
testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_CORRUPT,
- "database corruption at line %d of [%.10s]",
- lineno, 20+sqlite3_sourceid());
- return SQLITE_CORRUPT;
+ return sqlite3ReportError(SQLITE_CORRUPT, lineno, "database corruption");
}
SQLITE_PRIVATE int sqlite3MisuseError(int lineno){
testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_MISUSE,
- "misuse at line %d of [%.10s]",
- lineno, 20+sqlite3_sourceid());
- return SQLITE_MISUSE;
+ return sqlite3ReportError(SQLITE_MISUSE, lineno, "misuse");
}
SQLITE_PRIVATE int sqlite3CantopenError(int lineno){
testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_CANTOPEN,
- "cannot open file at line %d of [%.10s]",
- lineno, 20+sqlite3_sourceid());
- return SQLITE_CANTOPEN;
+ return sqlite3ReportError(SQLITE_CANTOPEN, lineno, "cannot open file");
}
-
+#ifdef SQLITE_DEBUG
+SQLITE_PRIVATE int sqlite3CorruptPgnoError(int lineno, Pgno pgno){
+ char zMsg[100];
+ sqlite3_snprintf(sizeof(zMsg), zMsg, "database corruption page %d", pgno);
+ testcase( sqlite3GlobalConfig.xLog!=0 );
+ return sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg);
+}
+SQLITE_PRIVATE int sqlite3NomemError(int lineno){
+ testcase( sqlite3GlobalConfig.xLog!=0 );
+ return sqlite3ReportError(SQLITE_NOMEM, lineno, "OOM");
+}
+SQLITE_PRIVATE int sqlite3IoerrnomemError(int lineno){
+ testcase( sqlite3GlobalConfig.xLog!=0 );
+ return sqlite3ReportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error");
+}
+#endif
#ifndef SQLITE_OMIT_DEPRECATED
/*
** SQLite no longer uses thread-specific data so this routine is now a
** no-op. It is retained for historical compatibility.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3_thread_cleanup(void){
+SQLITE_API void sqlite3_thread_cleanup(void){
}
#endif
** Return meta information about a specific column of a database table.
** See comment in sqlite3.h (sqlite.h.in) for details.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
sqlite3 *db, /* Connection handle */
const char *zDbName, /* Database name or NULL */
const char *zTableName, /* Table name */
** explicitly declared column. Copy meta information from *pCol.
*/
if( pCol ){
- zDataType = pCol->zType;
+ zDataType = sqlite3ColumnType(pCol,0);
zCollSeq = pCol->zColl;
notnull = pCol->notNull!=0;
primarykey = (pCol->colFlags & COLFLAG_PRIMKEY)!=0;
primarykey = 1;
}
if( !zCollSeq ){
- zCollSeq = "BINARY";
+ zCollSeq = sqlite3StrBINARY;
}
error_out:
/*
** Sleep for a little while. Return the amount of time slept.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int ms){
+SQLITE_API int sqlite3_sleep(int ms){
sqlite3_vfs *pVfs;
int rc;
pVfs = sqlite3_vfs_find(0);
/*
** Enable or disable the extended result codes.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3 *db, int onoff){
+SQLITE_API int sqlite3_extended_result_codes(sqlite3 *db, int onoff){
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT;
#endif
/*
** Invoke the xFileControl method on a particular database.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){
+SQLITE_API int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){
int rc = SQLITE_ERROR;
Btree *pBtree;
if( op==SQLITE_FCNTL_FILE_POINTER ){
*(sqlite3_file**)pArg = fd;
rc = SQLITE_OK;
- }else if( fd->pMethods ){
- rc = sqlite3OsFileControl(fd, op, pArg);
+ }else if( op==SQLITE_FCNTL_VFS_POINTER ){
+ *(sqlite3_vfs**)pArg = sqlite3PagerVfs(pPager);
+ rc = SQLITE_OK;
+ }else if( op==SQLITE_FCNTL_JOURNAL_POINTER ){
+ *(sqlite3_file**)pArg = sqlite3PagerJrnlFile(pPager);
+ rc = SQLITE_OK;
}else{
- rc = SQLITE_NOTFOUND;
+ rc = sqlite3OsFileControl(fd, op, pArg);
}
sqlite3BtreeLeave(pBtree);
}
/*
** Interface to the testing logic.
*/
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...){
+SQLITE_API int sqlite3_test_control(int op, ...){
int rc = 0;
-#ifdef SQLITE_OMIT_BUILTIN_TEST
+#ifdef SQLITE_UNTESTABLE
UNUSED_PARAMETER(op);
#else
va_list ap;
*/
case SQLITE_TESTCTRL_ASSERT: {
volatile int x = 0;
- assert( (x = va_arg(ap,int))!=0 );
+ assert( /*side-effects-ok*/ (x = va_arg(ap,int))!=0 );
rc = x;
break;
}
** This action provides a run-time test to see how the ALWAYS and
** NEVER macros were defined at compile-time.
**
- ** The return value is ALWAYS(X).
+ ** The return value is ALWAYS(X) if X is true, or 0 if X is false.
**
** The recommended test is X==2. If the return value is 2, that means
** ALWAYS() and NEVER() are both no-op pass-through macros, which is the
*/
case SQLITE_TESTCTRL_ALWAYS: {
int x = va_arg(ap,int);
- rc = ALWAYS(x);
+ rc = x ? ALWAYS(x) : 0;
break;
}
}
#endif
- /* sqlite3_test_control(SQLITE_TESTCTRL_SCRATCHMALLOC, sz, &pNew, pFree);
- **
- ** Pass pFree into sqlite3ScratchFree().
- ** If sz>0 then allocate a scratch buffer into pNew.
- */
- case SQLITE_TESTCTRL_SCRATCHMALLOC: {
- void *pFree, **ppNew;
- int sz;
- sz = va_arg(ap, int);
- ppNew = va_arg(ap, void**);
- pFree = va_arg(ap, void*);
- if( sz ) *ppNew = sqlite3ScratchMalloc(sz);
- sqlite3ScratchFree(pFree);
- break;
- }
-
/* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff);
**
** If parameter onoff is non-zero, configure the wrappers so that all
break;
}
+ /* Set the threshold at which OP_Once counters reset back to zero.
+ ** By default this is 0x7ffffffe (over 2 billion), but that value is
+ ** too big to test in a reasonable amount of time, so this control is
+ ** provided to set a small and easily reachable reset value.
+ */
+ case SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD: {
+ sqlite3GlobalConfig.iOnceResetThreshold = va_arg(ap, int);
+ break;
+ }
/* sqlite3_test_control(SQLITE_TESTCTRL_VDBE_COVERAGE, xCallback, ptr);
**
sqlite3_mutex_leave(db->mutex);
break;
}
+
+#if defined(YYCOVERAGE)
+ /* sqlite3_test_control(SQLITE_TESTCTRL_PARSER_COVERAGE, FILE *out)
+ **
+ ** This test control (only available when SQLite is compiled with
+ ** -DYYCOVERAGE) writes a report onto "out" that shows all
+ ** state/lookahead combinations in the parser state machine
+ ** which are never exercised. If any state is missed, make the
+ ** return code SQLITE_ERROR.
+ */
+ case SQLITE_TESTCTRL_PARSER_COVERAGE: {
+ FILE *out = va_arg(ap, FILE*);
+ if( sqlite3ParserCoverage(out) ) rc = SQLITE_ERROR;
+ break;
+ }
+#endif /* defined(YYCOVERAGE) */
}
va_end(ap);
-#endif /* SQLITE_OMIT_BUILTIN_TEST */
+#endif /* SQLITE_UNTESTABLE */
return rc;
}
** parameter if it exists. If the parameter does not exist, this routine
** returns a NULL pointer.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam){
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){
if( zFilename==0 || zParam==0 ) return 0;
zFilename += sqlite3Strlen30(zFilename) + 1;
while( zFilename[0] ){
/*
** Return a boolean value for a query parameter.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){
+SQLITE_API int sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){
const char *z = sqlite3_uri_parameter(zFilename, zParam);
bDflt = bDflt!=0;
return z ? sqlite3GetBoolean(z, bDflt) : bDflt;
/*
** Return a 64-bit integer value for a query parameter.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(
const char *zFilename, /* Filename as passed to xOpen */
const char *zParam, /* URI parameter sought */
sqlite3_int64 bDflt /* return if parameter is missing */
){
const char *z = sqlite3_uri_parameter(zFilename, zParam);
sqlite3_int64 v;
- if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){
+ if( z && sqlite3DecOrHexToI64(z, &v)==0 ){
bDflt = v;
}
return bDflt;
** Return the Btree pointer identified by zDbName. Return NULL if not found.
*/
SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3 *db, const char *zDbName){
- int i;
- for(i=0; i<db->nDb; i++){
- if( db->aDb[i].pBt
- && (zDbName==0 || sqlite3StrICmp(zDbName, db->aDb[i].zName)==0)
- ){
- return db->aDb[i].pBt;
- }
- }
- return 0;
+ int iDb = zDbName ? sqlite3FindDbName(db, zDbName) : 0;
+ return iDb<0 ? 0 : db->aDb[iDb].pBt;
}
/*
** Return the filename of the database associated with a database
** connection.
*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName){
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){
Btree *pBt;
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
** Return 1 if database is read-only or 0 if read/write. Return -1 if
** no such database exists.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName){
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){
Btree *pBt;
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
return pBt ? sqlite3BtreeIsReadonly(pBt) : -1;
}
+#ifdef SQLITE_ENABLE_SNAPSHOT
+/*
+** Obtain a snapshot handle for the snapshot of database zDb currently
+** being read by handle db.
+*/
+SQLITE_API int sqlite3_snapshot_get(
+ sqlite3 *db,
+ const char *zDb,
+ sqlite3_snapshot **ppSnapshot
+){
+ int rc = SQLITE_ERROR;
+#ifndef SQLITE_OMIT_WAL
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ return SQLITE_MISUSE_BKPT;
+ }
+#endif
+ sqlite3_mutex_enter(db->mutex);
+
+ if( db->autoCommit==0 ){
+ int iDb = sqlite3FindDbName(db, zDb);
+ if( iDb==0 || iDb>1 ){
+ Btree *pBt = db->aDb[iDb].pBt;
+ if( 0==sqlite3BtreeIsInTrans(pBt) ){
+ rc = sqlite3BtreeBeginTrans(pBt, 0);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3PagerSnapshotGet(sqlite3BtreePager(pBt), ppSnapshot);
+ }
+ }
+ }
+ }
+
+ sqlite3_mutex_leave(db->mutex);
+#endif /* SQLITE_OMIT_WAL */
+ return rc;
+}
+
+/*
+** Open a read-transaction on the snapshot idendified by pSnapshot.
+*/
+SQLITE_API int sqlite3_snapshot_open(
+ sqlite3 *db,
+ const char *zDb,
+ sqlite3_snapshot *pSnapshot
+){
+ int rc = SQLITE_ERROR;
+#ifndef SQLITE_OMIT_WAL
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ return SQLITE_MISUSE_BKPT;
+ }
+#endif
+ sqlite3_mutex_enter(db->mutex);
+ if( db->autoCommit==0 ){
+ int iDb;
+ iDb = sqlite3FindDbName(db, zDb);
+ if( iDb==0 || iDb>1 ){
+ Btree *pBt = db->aDb[iDb].pBt;
+ if( 0==sqlite3BtreeIsInReadTrans(pBt) ){
+ rc = sqlite3PagerSnapshotOpen(sqlite3BtreePager(pBt), pSnapshot);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3BtreeBeginTrans(pBt, 0);
+ sqlite3PagerSnapshotOpen(sqlite3BtreePager(pBt), 0);
+ }
+ }
+ }
+ }
+
+ sqlite3_mutex_leave(db->mutex);
+#endif /* SQLITE_OMIT_WAL */
+ return rc;
+}
+
+/*
+** Recover as many snapshots as possible from the wal file associated with
+** schema zDb of database db.
+*/
+SQLITE_API int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb){
+ int rc = SQLITE_ERROR;
+ int iDb;
+#ifndef SQLITE_OMIT_WAL
+
+#ifdef SQLITE_ENABLE_API_ARMOR
+ if( !sqlite3SafetyCheckOk(db) ){
+ return SQLITE_MISUSE_BKPT;
+ }
+#endif
+
+ sqlite3_mutex_enter(db->mutex);
+ iDb = sqlite3FindDbName(db, zDb);
+ if( iDb==0 || iDb>1 ){
+ Btree *pBt = db->aDb[iDb].pBt;
+ if( 0==sqlite3BtreeIsInReadTrans(pBt) ){
+ rc = sqlite3BtreeBeginTrans(pBt, 0);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3PagerSnapshotRecover(sqlite3BtreePager(pBt));
+ sqlite3BtreeCommit(pBt);
+ }
+ }
+ }
+ sqlite3_mutex_leave(db->mutex);
+#endif /* SQLITE_OMIT_WAL */
+ return rc;
+}
+
+/*
+** Free a snapshot handle obtained from sqlite3_snapshot_get().
+*/
+SQLITE_API void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){
+ sqlite3_free(pSnapshot);
+}
+#endif /* SQLITE_ENABLE_SNAPSHOT */
+
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+/*
+** Given the name of a compile-time option, return true if that option
+** was used and false if not.
+**
+** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
+** is not required for a match.
+*/
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName){
+ int i, n;
+ int nOpt;
+ const char **azCompileOpt;
+
+#if SQLITE_ENABLE_API_ARMOR
+ if( zOptName==0 ){
+ (void)SQLITE_MISUSE_BKPT;
+ return 0;
+ }
+#endif
+
+ azCompileOpt = sqlite3CompileOptions(&nOpt);
+
+ if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
+ n = sqlite3Strlen30(zOptName);
+
+ /* Since nOpt is normally in single digits, a linear search is
+ ** adequate. No need for a binary search. */
+ for(i=0; i<nOpt; i++){
+ if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0
+ && sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0
+ ){
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+** Return the N-th compile-time option string. If N is out of range,
+** return a NULL pointer.
+*/
+SQLITE_API const char *sqlite3_compileoption_get(int N){
+ int nOpt;
+ const char **azCompileOpt;
+ azCompileOpt = sqlite3CompileOptions(&nOpt);
+ if( N>=0 && N<nOpt ){
+ return azCompileOpt[N];
+ }
+ return 0;
+}
+#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */
+
/************** End of main.c ************************************************/
/************** Begin file notify.c ******************************************/
/*
** on the same "db". If xNotify==0 then any prior callbacks are immediately
** cancelled.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
sqlite3 *db,
void (*xNotify)(void **, int),
void *pArg
# define NDEBUG 1
#endif
+/* FTS3/FTS4 require virtual tables */
+#ifdef SQLITE_OMIT_VIRTUALTABLE
+# undef SQLITE_ENABLE_FTS3
+# undef SQLITE_ENABLE_FTS4
+#endif
+
/*
** FTS4 is really an extension for FTS3. It is enabled using the
** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also all
** statements is run and reset within a single virtual table API call.
*/
sqlite3_stmt *aStmt[40];
+ sqlite3_stmt *pSeekStmt; /* Cache for fts3CursorSeekStmt() */
char *zReadExprlist;
char *zWriteExprlist;
i16 eSearch; /* Search strategy (see below) */
u8 isEof; /* True if at End Of Results */
u8 isRequireSeek; /* True if must seek pStmt to %_content row */
+ u8 bSeekStmt; /* True if pStmt is a seek */
sqlite3_stmt *pStmt; /* Prepared statement in use by the cursor */
Fts3Expr *pExpr; /* Parsed MATCH query string */
int iLangid; /* Language being queried for */
** Return the number of bytes read, or 0 on error.
** The value is stored in *v.
*/
-SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){
- const char *pStart = p;
+SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *pBuf, sqlite_int64 *v){
+ const unsigned char *p = (const unsigned char*)pBuf;
+ const unsigned char *pStart = p;
u32 a;
u64 b;
int shift;
}
/*
-** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to a
-** 32-bit integer before it is returned.
+** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to
+** a non-negative 32-bit integer before it is returned.
*/
SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *p, int *pi){
u32 a;
GETVARINT_STEP(a, p, 14, 0x3FFF, 0x200000, *pi, 3);
GETVARINT_STEP(a, p, 21, 0x1FFFFF, 0x10000000, *pi, 4);
a = (a & 0x0FFFFFFF );
- *pi = (int)(a | ((u32)(*p & 0x0F) << 28));
+ *pi = (int)(a | ((u32)(*p & 0x07) << 28));
+ assert( 0==(a & 0x80000000) );
+ assert( *pi>=0 );
return 5;
}
assert( p->pSegments==0 );
/* Free any prepared statements held */
+ sqlite3_finalize(p->pSeekStmt);
for(i=0; i<SizeofArray(p->aStmt); i++){
sqlite3_finalize(p->aStmt[i]);
}
break;
}
}
- if( iOpt==SizeofArray(aFts4Opt) ){
- sqlite3Fts3ErrMsg(pzErr, "unrecognized parameter: %s", z);
- rc = SQLITE_ERROR;
- }else{
- switch( iOpt ){
- case 0: /* MATCHINFO */
- if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){
- sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo: %s", zVal);
- rc = SQLITE_ERROR;
- }
- bNoDocsize = 1;
- break;
+ switch( iOpt ){
+ case 0: /* MATCHINFO */
+ if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){
+ sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo: %s", zVal);
+ rc = SQLITE_ERROR;
+ }
+ bNoDocsize = 1;
+ break;
- case 1: /* PREFIX */
- sqlite3_free(zPrefix);
- zPrefix = zVal;
- zVal = 0;
- break;
+ case 1: /* PREFIX */
+ sqlite3_free(zPrefix);
+ zPrefix = zVal;
+ zVal = 0;
+ break;
- case 2: /* COMPRESS */
- sqlite3_free(zCompress);
- zCompress = zVal;
- zVal = 0;
- break;
+ case 2: /* COMPRESS */
+ sqlite3_free(zCompress);
+ zCompress = zVal;
+ zVal = 0;
+ break;
- case 3: /* UNCOMPRESS */
- sqlite3_free(zUncompress);
- zUncompress = zVal;
- zVal = 0;
- break;
+ case 3: /* UNCOMPRESS */
+ sqlite3_free(zUncompress);
+ zUncompress = zVal;
+ zVal = 0;
+ break;
- case 4: /* ORDER */
- if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3))
- && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 4))
- ){
- sqlite3Fts3ErrMsg(pzErr, "unrecognized order: %s", zVal);
- rc = SQLITE_ERROR;
- }
- bDescIdx = (zVal[0]=='d' || zVal[0]=='D');
- break;
+ case 4: /* ORDER */
+ if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3))
+ && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 4))
+ ){
+ sqlite3Fts3ErrMsg(pzErr, "unrecognized order: %s", zVal);
+ rc = SQLITE_ERROR;
+ }
+ bDescIdx = (zVal[0]=='d' || zVal[0]=='D');
+ break;
- case 5: /* CONTENT */
- sqlite3_free(zContent);
- zContent = zVal;
- zVal = 0;
- break;
+ case 5: /* CONTENT */
+ sqlite3_free(zContent);
+ zContent = zVal;
+ zVal = 0;
+ break;
- case 6: /* LANGUAGEID */
- assert( iOpt==6 );
- sqlite3_free(zLanguageid);
- zLanguageid = zVal;
- zVal = 0;
- break;
+ case 6: /* LANGUAGEID */
+ assert( iOpt==6 );
+ sqlite3_free(zLanguageid);
+ zLanguageid = zVal;
+ zVal = 0;
+ break;
- case 7: /* NOTINDEXED */
- azNotindexed[nNotindexed++] = zVal;
- zVal = 0;
- break;
- }
+ case 7: /* NOTINDEXED */
+ azNotindexed[nNotindexed++] = zVal;
+ zVal = 0;
+ break;
+
+ default:
+ assert( iOpt==SizeofArray(aFts4Opt) );
+ sqlite3Fts3ErrMsg(pzErr, "unrecognized parameter: %s", z);
+ rc = SQLITE_ERROR;
+ break;
}
sqlite3_free(zVal);
}
p->pTokenizer = pTokenizer;
p->nMaxPendingData = FTS3_MAX_PENDING_DATA;
p->bHasDocsize = (isFts4 && bNoDocsize==0);
- p->bHasStat = isFts4;
- p->bFts4 = isFts4;
- p->bDescIdx = bDescIdx;
+ p->bHasStat = (u8)isFts4;
+ p->bFts4 = (u8)isFts4;
+ p->bDescIdx = (u8)bDescIdx;
p->nAutoincrmerge = 0xff; /* 0xff means setting unknown */
p->zContentTbl = zContent;
p->zLanguageid = zLanguageid;
char *z;
int n = 0;
z = (char *)sqlite3Fts3NextToken(aCol[iCol], &n);
- memcpy(zCsr, z, n);
+ if( n>0 ){
+ memcpy(zCsr, z, n);
+ }
zCsr[n] = '\0';
sqlite3Fts3Dequote(zCsr);
p->azColumn[iCol] = zCsr;
return SQLITE_OK;
}
+/*
+** Finalize the statement handle at pCsr->pStmt.
+**
+** Or, if that statement handle is one created by fts3CursorSeekStmt(),
+** and the Fts3Table.pSeekStmt slot is currently NULL, save the statement
+** pointer there instead of finalizing it.
+*/
+static void fts3CursorFinalizeStmt(Fts3Cursor *pCsr){
+ if( pCsr->bSeekStmt ){
+ Fts3Table *p = (Fts3Table *)pCsr->base.pVtab;
+ if( p->pSeekStmt==0 ){
+ p->pSeekStmt = pCsr->pStmt;
+ sqlite3_reset(pCsr->pStmt);
+ pCsr->pStmt = 0;
+ }
+ pCsr->bSeekStmt = 0;
+ }
+ sqlite3_finalize(pCsr->pStmt);
+}
+
+/*
+** Free all resources currently held by the cursor passed as the only
+** argument.
+*/
+static void fts3ClearCursor(Fts3Cursor *pCsr){
+ fts3CursorFinalizeStmt(pCsr);
+ sqlite3Fts3FreeDeferredTokens(pCsr);
+ sqlite3_free(pCsr->aDoclist);
+ sqlite3Fts3MIBufferFree(pCsr->pMIBuffer);
+ sqlite3Fts3ExprFree(pCsr->pExpr);
+ memset(&(&pCsr->base)[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor));
+}
+
/*
** Close the cursor. For additional information see the documentation
** on the xClose method of the virtual table interface.
static int fts3CloseMethod(sqlite3_vtab_cursor *pCursor){
Fts3Cursor *pCsr = (Fts3Cursor *)pCursor;
assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 );
- sqlite3_finalize(pCsr->pStmt);
- sqlite3Fts3ExprFree(pCsr->pExpr);
- sqlite3Fts3FreeDeferredTokens(pCsr);
- sqlite3_free(pCsr->aDoclist);
- sqlite3Fts3MIBufferFree(pCsr->pMIBuffer);
+ fts3ClearCursor(pCsr);
assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 );
sqlite3_free(pCsr);
return SQLITE_OK;
**
** (or the equivalent for a content=xxx table) and set pCsr->pStmt to
** it. If an error occurs, return an SQLite error code.
-**
-** Otherwise, set *ppStmt to point to pCsr->pStmt and return SQLITE_OK.
*/
-static int fts3CursorSeekStmt(Fts3Cursor *pCsr, sqlite3_stmt **ppStmt){
+static int fts3CursorSeekStmt(Fts3Cursor *pCsr){
int rc = SQLITE_OK;
if( pCsr->pStmt==0 ){
Fts3Table *p = (Fts3Table *)pCsr->base.pVtab;
char *zSql;
- zSql = sqlite3_mprintf("SELECT %s WHERE rowid = ?", p->zReadExprlist);
- if( !zSql ) return SQLITE_NOMEM;
- rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0);
- sqlite3_free(zSql);
+ if( p->pSeekStmt ){
+ pCsr->pStmt = p->pSeekStmt;
+ p->pSeekStmt = 0;
+ }else{
+ zSql = sqlite3_mprintf("SELECT %s WHERE rowid = ?", p->zReadExprlist);
+ if( !zSql ) return SQLITE_NOMEM;
+ rc = sqlite3_prepare_v3(p->db, zSql,-1,SQLITE_PREPARE_PERSISTENT,&pCsr->pStmt,0);
+ sqlite3_free(zSql);
+ }
+ if( rc==SQLITE_OK ) pCsr->bSeekStmt = 1;
}
- *ppStmt = pCsr->pStmt;
return rc;
}
static int fts3CursorSeek(sqlite3_context *pContext, Fts3Cursor *pCsr){
int rc = SQLITE_OK;
if( pCsr->isRequireSeek ){
- sqlite3_stmt *pStmt = 0;
-
- rc = fts3CursorSeekStmt(pCsr, &pStmt);
+ rc = fts3CursorSeekStmt(pCsr);
if( rc==SQLITE_OK ){
sqlite3_bind_int64(pCsr->pStmt, 1, pCsr->iPrevId);
pCsr->isRequireSeek = 0;
isFirstTerm = 0;
zCsr += fts3GetVarint32(zCsr, &nSuffix);
- if( nPrefix<0 || nSuffix<0 || &zCsr[nSuffix]>zEnd ){
+ assert( nPrefix>=0 && nSuffix>=0 );
+ if( &zCsr[nSuffix]>zEnd ){
rc = FTS_CORRUPT_VTAB;
goto finish_scan;
}
fts3ColumnlistCopy(0, &p);
}
- while( p<pEnd && *p==0x01 ){
+ while( p<pEnd ){
sqlite3_int64 iCol;
p++;
p += sqlite3Fts3GetVarint(p, &iCol);
assert( iIdx==nVal );
/* In case the cursor has been used before, clear it now. */
- sqlite3_finalize(pCsr->pStmt);
- sqlite3_free(pCsr->aDoclist);
- sqlite3Fts3MIBufferFree(pCsr->pMIBuffer);
- sqlite3Fts3ExprFree(pCsr->pExpr);
- memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor));
+ fts3ClearCursor(pCsr);
/* Set the lower and upper bounds on docids to return */
pCsr->iMinDocid = fts3DocidRange(pDocidGe, SMALLEST_INT64);
);
}
if( zSql ){
- rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0);
+ rc = sqlite3_prepare_v3(p->db,zSql,-1,SQLITE_PREPARE_PERSISTENT,&pCsr->pStmt,0);
sqlite3_free(zSql);
}else{
rc = SQLITE_NOMEM;
}
}else if( eSearch==FTS3_DOCID_SEARCH ){
- rc = fts3CursorSeekStmt(pCsr, &pCsr->pStmt);
+ rc = fts3CursorSeekStmt(pCsr);
if( rc==SQLITE_OK ){
rc = sqlite3_bind_value(pCsr->pStmt, 1, pCons);
}
** routine to find out if it has reached the end of a result set.
*/
static int fts3EofMethod(sqlite3_vtab_cursor *pCursor){
- return ((Fts3Cursor *)pCursor)->isEof;
+ Fts3Cursor *pCsr = (Fts3Cursor*)pCursor;
+ if( pCsr->isEof ){
+ fts3ClearCursor(pCsr);
+ pCsr->isEof = 1;
+ }
+ return pCsr->isEof;
}
/*
/* The column value supplied by SQLite must be in range. */
assert( iCol>=0 && iCol<=p->nColumn+2 );
- if( iCol==p->nColumn+1 ){
- /* This call is a request for the "docid" column. Since "docid" is an
- ** alias for "rowid", use the xRowid() method to obtain the value.
- */
- sqlite3_result_int64(pCtx, pCsr->iPrevId);
- }else if( iCol==p->nColumn ){
- /* The extra column whose name is the same as the table.
- ** Return a blob which is a pointer to the cursor. */
- sqlite3_result_blob(pCtx, &pCsr, sizeof(pCsr), SQLITE_TRANSIENT);
- }else if( iCol==p->nColumn+2 && pCsr->pExpr ){
- sqlite3_result_int64(pCtx, pCsr->iLangid);
- }else{
- /* The requested column is either a user column (one that contains
- ** indexed data), or the language-id column. */
- rc = fts3CursorSeek(0, pCsr);
+ switch( iCol-p->nColumn ){
+ case 0:
+ /* The special 'table-name' column */
+ sqlite3_result_pointer(pCtx, pCsr, "fts3cursor", 0);
+ break;
- if( rc==SQLITE_OK ){
- if( iCol==p->nColumn+2 ){
- int iLangid = 0;
- if( p->zLanguageid ){
- iLangid = sqlite3_column_int(pCsr->pStmt, p->nColumn+1);
- }
- sqlite3_result_int(pCtx, iLangid);
- }else if( sqlite3_data_count(pCsr->pStmt)>(iCol+1) ){
+ case 1:
+ /* The docid column */
+ sqlite3_result_int64(pCtx, pCsr->iPrevId);
+ break;
+
+ case 2:
+ if( pCsr->pExpr ){
+ sqlite3_result_int64(pCtx, pCsr->iLangid);
+ break;
+ }else if( p->zLanguageid==0 ){
+ sqlite3_result_int(pCtx, 0);
+ break;
+ }else{
+ iCol = p->nColumn;
+ /* fall-through */
+ }
+
+ default:
+ /* A user column. Or, if this is a full-table scan, possibly the
+ ** language-id column. Seek the cursor. */
+ rc = fts3CursorSeek(0, pCsr);
+ if( rc==SQLITE_OK && sqlite3_data_count(pCsr->pStmt)-1>iCol ){
sqlite3_result_value(pCtx, sqlite3_column_value(pCsr->pStmt, iCol+1));
}
- }
+ break;
}
assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 );
const u32 nMinMerge = 64; /* Minimum amount of incr-merge work to do */
Fts3Table *p = (Fts3Table*)pVtab;
- int rc = sqlite3Fts3PendingTermsFlush(p);
+ int rc;
+ i64 iLastRowid = sqlite3_last_insert_rowid(p->db);
+ rc = sqlite3Fts3PendingTermsFlush(p);
if( rc==SQLITE_OK
&& p->nLeafAdd>(nMinMerge/16)
&& p->nAutoincrmerge && p->nAutoincrmerge!=0xff
if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, p->nAutoincrmerge);
}
sqlite3Fts3SegmentsClose(p);
+ sqlite3_set_last_insert_rowid(p->db, iLastRowid);
return rc;
}
static int fts3SetHasStat(Fts3Table *p){
int rc = SQLITE_OK;
if( p->bHasStat==2 ){
- const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'";
- char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName);
- if( zSql ){
- sqlite3_stmt *pStmt = 0;
- rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0);
- if( rc==SQLITE_OK ){
- int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW);
- rc = sqlite3_finalize(pStmt);
- if( rc==SQLITE_OK ) p->bHasStat = bHasStat;
- }
- sqlite3_free(zSql);
+ char *zTbl = sqlite3_mprintf("%s_stat", p->zName);
+ if( zTbl ){
+ int res = sqlite3_table_column_metadata(p->db, p->zDb, zTbl, 0,0,0,0,0,0);
+ sqlite3_free(zTbl);
+ p->bHasStat = (res==SQLITE_OK);
}else{
rc = SQLITE_NOMEM;
}
sqlite3_value *pVal, /* argv[0] passed to function */
Fts3Cursor **ppCsr /* OUT: Store cursor handle here */
){
- Fts3Cursor *pRet;
- if( sqlite3_value_type(pVal)!=SQLITE_BLOB
- || sqlite3_value_bytes(pVal)!=sizeof(Fts3Cursor *)
- ){
+ int rc;
+ *ppCsr = (Fts3Cursor*)sqlite3_value_pointer(pVal, "fts3cursor");
+ if( (*ppCsr)!=0 ){
+ rc = SQLITE_OK;
+ }else{
char *zErr = sqlite3_mprintf("illegal first argument to %s", zFunc);
sqlite3_result_error(pContext, zErr, -1);
sqlite3_free(zErr);
- return SQLITE_ERROR;
+ rc = SQLITE_ERROR;
}
- memcpy(&pRet, sqlite3_value_blob(pVal), sizeof(Fts3Cursor *));
- *ppCsr = pRet;
- return SQLITE_OK;
+ return rc;
}
/*
#endif
/* Create the virtual table wrapper around the hash-table and overload
- ** the two scalar functions. If this is successful, register the
+ ** the four scalar functions. If this is successful, register the
** module with sqlite.
*/
if( SQLITE_OK==rc
** one incremental token. In which case the bIncr flag is set. */
assert( p->bIncr==1 );
- if( p->nToken==1 && p->bIncr ){
+ if( p->nToken==1 ){
rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr,
&pDL->iDocid, &pDL->pList, &pDL->nList
);
** the number of overflow pages consumed by a record B bytes in size.
*/
static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){
+ int rc = SQLITE_OK;
if( pCsr->nRowAvg==0 ){
/* The average document size, which is required to calculate the cost
** of each doclist, has not yet been determined. Read the required
** data stored in all rows of each column of the table, from left
** to right.
*/
- int rc;
Fts3Table *p = (Fts3Table*)pCsr->base.pVtab;
sqlite3_stmt *pStmt;
sqlite3_int64 nDoc = 0;
pCsr->nRowAvg = (int)(((nByte / nDoc) + p->nPgsz) / p->nPgsz);
assert( pCsr->nRowAvg>0 );
rc = sqlite3_reset(pStmt);
- if( rc!=SQLITE_OK ) return rc;
}
*pnPage = pCsr->nRowAvg;
- return SQLITE_OK;
+ return rc;
}
/*
pExpr->iDocid = pLeft->iDocid;
pExpr->bEof = (pLeft->bEof || pRight->bEof);
if( pExpr->eType==FTSQUERY_NEAR && pExpr->bEof ){
- if( pRight->pPhrase && pRight->pPhrase->doclist.aAll ){
+ assert( pRight->eType==FTSQUERY_PHRASE );
+ if( pRight->pPhrase->doclist.aAll ){
Fts3Doclist *pDl = &pRight->pPhrase->doclist;
while( *pRc==SQLITE_OK && pRight->bEof==0 ){
memset(pDl->pList, 0, pDl->nList);
if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){
fts3EvalNextRow(pCsr, pLeft, pRc);
- }else if( pLeft->bEof || (pRight->bEof==0 && iCmp>0) ){
+ }else if( pLeft->bEof || iCmp>0 ){
fts3EvalNextRow(pCsr, pRight, pRc);
}else{
fts3EvalNextRow(pCsr, pLeft, pRc);
*/
if( *pRc==SQLITE_OK
&& pExpr->eType==FTSQUERY_NEAR
- && pExpr->bEof==0
&& (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR)
){
Fts3Expr *p;
/* Allocate temporary working space. */
for(p=pExpr; p->pLeft; p=p->pLeft){
+ assert( p->pRight->pPhrase->doclist.nList>0 );
nTmp += p->pRight->pPhrase->doclist.nList;
}
nTmp += p->pPhrase->doclist.nList;
- if( nTmp==0 ){
+ aTmp = sqlite3_malloc(nTmp*2);
+ if( !aTmp ){
+ *pRc = SQLITE_NOMEM;
res = 0;
}else{
- aTmp = sqlite3_malloc(nTmp*2);
- if( !aTmp ){
- *pRc = SQLITE_NOMEM;
- res = 0;
- }else{
- char *aPoslist = p->pPhrase->doclist.pList;
- int nToken = p->pPhrase->nToken;
-
- for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){
- Fts3Phrase *pPhrase = p->pRight->pPhrase;
- int nNear = p->nNear;
- res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase);
- }
-
- aPoslist = pExpr->pRight->pPhrase->doclist.pList;
- nToken = pExpr->pRight->pPhrase->nToken;
- for(p=pExpr->pLeft; p && res; p=p->pLeft){
- int nNear;
- Fts3Phrase *pPhrase;
- assert( p->pParent && p->pParent->pLeft==p );
- nNear = p->pParent->nNear;
- pPhrase = (
- p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase
- );
- res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase);
- }
+ char *aPoslist = p->pPhrase->doclist.pList;
+ int nToken = p->pPhrase->nToken;
+
+ for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){
+ Fts3Phrase *pPhrase = p->pRight->pPhrase;
+ int nNear = p->nNear;
+ res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase);
}
- sqlite3_free(aTmp);
+ aPoslist = pExpr->pRight->pPhrase->doclist.pList;
+ nToken = pExpr->pRight->pPhrase->nToken;
+ for(p=pExpr->pLeft; p && res; p=p->pLeft){
+ int nNear;
+ Fts3Phrase *pPhrase;
+ assert( p->pParent && p->pParent->pLeft==p );
+ nNear = p->pParent->nNear;
+ pPhrase = (
+ p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase
+ );
+ res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase);
+ }
}
+
+ sqlite3_free(aTmp);
}
return res;
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts3_init(
+SQLITE_API int sqlite3_fts3_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
/* #include <assert.h> */
/* #include <string.h> */
+/*
+** Return true if the two-argument version of fts3_tokenizer()
+** has been activated via a prior call to sqlite3_db_config(db,
+** SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, 1, 0);
+*/
+static int fts3TokenizerEnabled(sqlite3_context *context){
+ sqlite3 *db = sqlite3_context_db_handle(context);
+ int isEnabled = 0;
+ sqlite3_db_config(db,SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER,-1,&isEnabled);
+ return isEnabled;
+}
+
/*
** Implementation of the SQL scalar function for accessing the underlying
** hash table. This function may be called as follows:
** is a blob containing the pointer stored as the hash data corresponding
** to string <key-name> (after the hash-table is updated, if applicable).
*/
-static void scalarFunc(
+static void fts3TokenizerFunc(
sqlite3_context *context,
int argc,
sqlite3_value **argv
nName = sqlite3_value_bytes(argv[0])+1;
if( argc==2 ){
- void *pOld;
- int n = sqlite3_value_bytes(argv[1]);
- if( zName==0 || n!=sizeof(pPtr) ){
- sqlite3_result_error(context, "argument type mismatch", -1);
- return;
- }
- pPtr = *(void **)sqlite3_value_blob(argv[1]);
- pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr);
- if( pOld==pPtr ){
- sqlite3_result_error(context, "out of memory", -1);
+ if( fts3TokenizerEnabled(context) ){
+ void *pOld;
+ int n = sqlite3_value_bytes(argv[1]);
+ if( zName==0 || n!=sizeof(pPtr) ){
+ sqlite3_result_error(context, "argument type mismatch", -1);
+ return;
+ }
+ pPtr = *(void **)sqlite3_value_blob(argv[1]);
+ pOld = sqlite3Fts3HashInsert(pHash, (void *)zName, nName, pPtr);
+ if( pOld==pPtr ){
+ sqlite3_result_error(context, "out of memory", -1);
+ }
+ }else{
+ sqlite3_result_error(context, "fts3tokenize disabled", -1);
return;
}
}else{
return;
}
}
-
sqlite3_result_blob(context, (void *)&pPtr, sizeof(pPtr), SQLITE_TRANSIENT);
}
#ifdef SQLITE_TEST
-#include <tcl.h>
+#if defined(INCLUDE_SQLITE_TCL_H)
+# include "sqlite_tcl.h"
+#else
+# include "tcl.h"
+#endif
/* #include <string.h> */
/*
return sqlite3_finalize(pStmt);
}
+
static
int queryTokenizer(
sqlite3 *db,
assert( 0==strcmp(sqlite3_errmsg(db), "unknown tokenizer: nosuchtokenizer") );
/* Test the storage function */
- rc = registerTokenizer(db, "nosuchtokenizer", p1);
- assert( rc==SQLITE_OK );
- rc = queryTokenizer(db, "nosuchtokenizer", &p2);
- assert( rc==SQLITE_OK );
- assert( p2==p1 );
+ if( fts3TokenizerEnabled(context) ){
+ rc = registerTokenizer(db, "nosuchtokenizer", p1);
+ assert( rc==SQLITE_OK );
+ rc = queryTokenizer(db, "nosuchtokenizer", &p2);
+ assert( rc==SQLITE_OK );
+ assert( p2==p1 );
+ }
sqlite3_result_text(context, "ok", -1, SQLITE_STATIC);
}
** sqlite3Fts3HashInit(pHash, FTS3_HASH_STRING, 1);
**
** This function adds a scalar function (see header comment above
-** scalarFunc() in this file for details) and, if ENABLE_TABLE is
+** fts3TokenizerFunc() in this file for details) and, if ENABLE_TABLE is
** defined at compilation time, a temporary virtual table (see header
** comment above struct HashTableVtab) to the database schema. Both
** provide read/write access to the contents of *pHash.
#endif
if( SQLITE_OK==rc ){
- rc = sqlite3_create_function(db, zName, 1, any, p, scalarFunc, 0, 0);
+ rc = sqlite3_create_function(db, zName, 1, any, p, fts3TokenizerFunc, 0, 0);
}
if( SQLITE_OK==rc ){
- rc = sqlite3_create_function(db, zName, 2, any, p, scalarFunc, 0, 0);
+ rc = sqlite3_create_function(db, zName, 2, any, p, fts3TokenizerFunc, 0, 0);
}
#ifdef SQLITE_TEST
if( SQLITE_OK==rc ){
** of the oldest level in the db that contains at least ? segments. Or,
** if no level in the FTS index contains more than ? segments, the statement
** returns zero rows. */
-/* 28 */ "SELECT level FROM %Q.'%q_segdir' GROUP BY level HAVING count(*)>=?"
+/* 28 */ "SELECT level, count(*) AS cnt FROM %Q.'%q_segdir' "
+ " GROUP BY level HAVING cnt>=?"
" ORDER BY (level %% 1024) ASC LIMIT 1",
/* Estimate the upper limit on the number of leaf nodes in a new segment
if( !zSql ){
rc = SQLITE_NOMEM;
}else{
- rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, NULL);
+ rc = sqlite3_prepare_v3(p->db, zSql, -1, SQLITE_PREPARE_PERSISTENT,
+ &pStmt, NULL);
sqlite3_free(zSql);
assert( rc==SQLITE_OK || pStmt==0 );
p->aStmt[eStmt] = pStmt;
sqlite3_bind_blob(pStmt, 2, z, n, SQLITE_STATIC);
sqlite3_step(pStmt);
rc = sqlite3_reset(pStmt);
+ sqlite3_bind_null(pStmt, 2);
}
return rc;
}
sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC);
sqlite3_step(pStmt);
rc = sqlite3_reset(pStmt);
+ sqlite3_bind_null(pStmt, 6);
}
return rc;
}
** segment. The level of the new segment is equal to the numerically
** greatest segment level currently present in the database for this
** index. The idx of the new segment is always 0. */
- if( csr.nSegment==1 ){
+ if( csr.nSegment==1 && 0==fts3SegReaderIsPending(csr.apSegment[0]) ){
rc = SQLITE_DONE;
goto finished;
}
sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, SQLITE_STATIC);
sqlite3_step(pStmt);
*pRC = sqlite3_reset(pStmt);
+ sqlite3_bind_null(pStmt, 2);
sqlite3_free(a);
}
sqlite3_bind_int(pChomp, 4, iIdx);
sqlite3_step(pChomp);
rc = sqlite3_reset(pChomp);
+ sqlite3_bind_null(pChomp, 2);
}
}
sqlite3_bind_blob(pReplace, 2, pHint->a, pHint->n, SQLITE_STATIC);
sqlite3_step(pReplace);
rc = sqlite3_reset(pReplace);
+ sqlite3_bind_null(pReplace, 2);
}
return rc;
** set nSeg to -1.
*/
rc = fts3SqlStmt(p, SQL_FIND_MERGE_LEVEL, &pFindLevel, 0);
- sqlite3_bind_int(pFindLevel, 1, nMin);
+ sqlite3_bind_int(pFindLevel, 1, MAX(2, nMin));
if( sqlite3_step(pFindLevel)==SQLITE_ROW ){
iAbsLevel = sqlite3_column_int64(pFindLevel, 0);
- nSeg = nMin;
+ nSeg = sqlite3_column_int(pFindLevel, 1);
+ assert( nSeg>=2 );
}else{
nSeg = -1;
}
** Convert the text beginning at *pz into an integer and return
** its value. Advance *pz to point to the first character past
** the integer.
+**
+** This function used for parameters to merge= and incrmerge=
+** commands.
*/
static int fts3Getint(const char **pz){
const char *z = *pz;
int i = 0;
- while( (*z)>='0' && (*z)<='9' ) i = 10*i + *(z++) - '0';
+ while( (*z)>='0' && (*z)<='9' && i<214748363 ) i = 10*i + *(z++) - '0';
*pz = z;
return i;
}
){
Fts3Table *p = (Fts3Table *)pVtab;
int rc = SQLITE_OK; /* Return Code */
- int isRemove = 0; /* True for an UPDATE or DELETE */
u32 *aSzIns = 0; /* Sizes of inserted documents */
u32 *aSzDel = 0; /* Sizes of deleted documents */
int nChng = 0; /* Net change in number of documents */
if( sqlite3_value_type(apVal[0])!=SQLITE_NULL ){
assert( sqlite3_value_type(apVal[0])==SQLITE_INTEGER );
rc = fts3DeleteByRowid(p, apVal[0], &nChng, aSzDel);
- isRemove = 1;
}
/* If this is an INSERT or UPDATE operation, insert the new record. */
rc = FTS_CORRUPT_VTAB;
}
}
- if( rc==SQLITE_OK && (!isRemove || *pRowid!=p->iPrevDocid ) ){
+ if( rc==SQLITE_OK ){
rc = fts3PendingTermsDocid(p, 0, iLangid, *pRowid);
}
if( rc==SQLITE_OK ){
){
const unsigned char *z = (const unsigned char *)zIn;
const unsigned char *zTerm = &z[nIn];
- int iCode;
+ unsigned int iCode;
int nEntry = 0;
assert( bAlnum==0 || bAlnum==1 );
while( z<zTerm ){
READ_UTF8(z, zTerm, iCode);
- assert( (sqlite3FtsUnicodeIsalnum(iCode) & 0xFFFFFFFE)==0 );
- if( sqlite3FtsUnicodeIsalnum(iCode)!=bAlnum
- && sqlite3FtsUnicodeIsdiacritic(iCode)==0
+ assert( (sqlite3FtsUnicodeIsalnum((int)iCode) & 0xFFFFFFFE)==0 );
+ if( sqlite3FtsUnicodeIsalnum((int)iCode)!=bAlnum
+ && sqlite3FtsUnicodeIsdiacritic((int)iCode)==0
){
nEntry++;
}
z = (const unsigned char *)zIn;
while( z<zTerm ){
READ_UTF8(z, zTerm, iCode);
- if( sqlite3FtsUnicodeIsalnum(iCode)!=bAlnum
- && sqlite3FtsUnicodeIsdiacritic(iCode)==0
+ if( sqlite3FtsUnicodeIsalnum((int)iCode)!=bAlnum
+ && sqlite3FtsUnicodeIsdiacritic((int)iCode)==0
){
int i, j;
- for(i=0; i<nNew && aNew[i]<iCode; i++);
+ for(i=0; i<nNew && aNew[i]<(int)iCode; i++);
for(j=nNew; j>i; j--) aNew[j] = aNew[j-1];
- aNew[i] = iCode;
+ aNew[i] = (int)iCode;
nNew++;
}
}
){
unicode_cursor *pCsr = (unicode_cursor *)pC;
unicode_tokenizer *p = ((unicode_tokenizer *)pCsr->base.pTokenizer);
- int iCode = 0;
+ unsigned int iCode = 0;
char *zOut;
const unsigned char *z = &pCsr->aInput[pCsr->iOff];
const unsigned char *zStart = z;
** the input. */
while( z<zTerm ){
READ_UTF8(z, zTerm, iCode);
- if( unicodeIsAlnum(p, iCode) ) break;
+ if( unicodeIsAlnum(p, (int)iCode) ) break;
zStart = z;
}
if( zStart>=zTerm ) return SQLITE_DONE;
/* Write the folded case of the last character read to the output */
zEnd = z;
- iOut = sqlite3FtsUnicodeFold(iCode, p->bRemoveDiacritic);
+ iOut = sqlite3FtsUnicodeFold((int)iCode, p->bRemoveDiacritic);
if( iOut ){
WRITE_UTF8(zOut, iOut);
}
/* If the cursor is not at EOF, read the next character */
if( z>=zTerm ) break;
READ_UTF8(z, zTerm, iCode);
- }while( unicodeIsAlnum(p, iCode)
- || sqlite3FtsUnicodeIsdiacritic(iCode)
+ }while( unicodeIsAlnum(p, (int)iCode)
+ || sqlite3FtsUnicodeIsdiacritic((int)iCode)
);
/* Set the output variables and return. */
0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001,
};
- if( c<128 ){
- return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 );
- }else if( c<(1<<22) ){
+ if( (unsigned int)c<128 ){
+ return ( (aAscii[c >> 5] & ((unsigned int)1 << (c & 0x001F)))==0 );
+ }else if( (unsigned int)c<(1<<22) ){
unsigned int key = (((unsigned int)c)<<10) | 0x000003FF;
int iRes = 0;
int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1;
int ret = c;
- assert( c>=0 );
assert( sizeof(unsigned short)==2 && sizeof(unsigned char)==1 );
if( c<128 ){
if( c>='A' && c<='Z' ) ret = c + ('a' - 'A');
}else if( c<65536 ){
+ const struct TableEntry *p;
int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1;
int iLo = 0;
int iRes = -1;
+ assert( c>aEntry[0].iCode );
while( iHi>=iLo ){
int iTest = (iHi + iLo) / 2;
int cmp = (c - aEntry[iTest].iCode);
iHi = iTest-1;
}
}
- assert( iRes<0 || c>=aEntry[iRes].iCode );
- if( iRes>=0 ){
- const struct TableEntry *p = &aEntry[iRes];
- if( c<(p->iCode + p->nRange) && 0==(0x01 & p->flags & (p->iCode ^ c)) ){
- ret = (c + (aiOff[p->flags>>1])) & 0x0000FFFF;
- assert( ret>0 );
- }
+ assert( iRes>=0 && c>=aEntry[iRes].iCode );
+ p = &aEntry[iRes];
+ if( c<(p->iCode + p->nRange) && 0==(0x01 & p->flags & (p->iCode ^ c)) ){
+ ret = (c + (aiOff[p->flags>>1])) & 0x0000FFFF;
+ assert( ret>0 );
}
if( bRemoveDiacritic ) ret = remove_diacritic(ret);
** child page.
*/
-#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RTREE)
+#if !defined(SQLITE_CORE) \
+ || (defined(SQLITE_ENABLE_RTREE) && !defined(SQLITE_OMIT_VIRTUALTABLE))
#ifndef SQLITE_CORE
/* #include "sqlite3ext.h" */
#ifndef SQLITE_AMALGAMATION
#include "sqlite3rtree.h"
typedef sqlite3_int64 i64;
+typedef sqlite3_uint64 u64;
typedef unsigned char u8;
typedef unsigned short u16;
typedef unsigned int u32;
sqlite3 *db; /* Host database connection */
int iNodeSize; /* Size in bytes of each node in the node table */
u8 nDim; /* Number of dimensions */
+ u8 nDim2; /* Twice the number of dimensions */
u8 eCoordType; /* RTREE_COORD_REAL32 or RTREE_COORD_INT32 */
u8 nBytesPerCell; /* Bytes consumed per cell */
+ u8 inWrTrans; /* True if inside write transaction */
int iDepth; /* Current depth of the r-tree structure */
char *zDb; /* Name of database containing r-tree table */
char *zName; /* Name of r-tree table */
- int nBusy; /* Current number of users of this structure */
+ u32 nBusy; /* Current number of users of this structure */
i64 nRowEst; /* Estimated number of rows in this table */
+ u32 nCursor; /* Number of open cursors */
/* List of nodes removed during a CondenseTree operation. List is
** linked together via the pointer normally used for hash chains -
RtreeNode *pDeleted;
int iReinsertHeight; /* Height of sub-trees Reinsert() has run on */
+ /* Blob I/O on xxx_node */
+ sqlite3_blob *pNodeBlob;
+
/* Statements to read/write/delete a record from xxx_node */
- sqlite3_stmt *pReadNode;
sqlite3_stmt *pWriteNode;
sqlite3_stmt *pDeleteNode;
** The smallest possible node-size is (512-64)==448 bytes. And the largest
** supported cell size is 48 bytes (8 byte rowid + ten 4 byte coordinates).
** Therefore all non-root nodes must contain at least 3 entries. Since
-** 2^40 is greater than 2^64, an r-tree structure always has a depth of
+** 3^40 is greater than 2^64, an r-tree structure always has a depth of
** 40 or less.
*/
#define RTREE_MAX_DEPTH 40
void *pContext;
};
-
-/*
-** Value for the first field of every RtreeMatchArg object. The MATCH
-** operator tests that the first field of a blob operand matches this
-** value to avoid operating on invalid blobs (which could cause a segfault).
-*/
-#define RTREE_GEOMETRY_MAGIC 0x891245AB
-
/*
** An instance of this structure (in the form of a BLOB) is returned by
** the SQL functions that sqlite3_rtree_geometry_callback() and
** operand to the MATCH operator of an R-Tree.
*/
struct RtreeMatchArg {
- u32 magic; /* Always RTREE_GEOMETRY_MAGIC */
+ u32 iSize; /* Size of this object */
RtreeGeomCallback cb; /* Info about the callback functions */
int nParam; /* Number of parameters to the SQL function */
sqlite3_value **apSqlParam; /* Original SQL parameter values */
# define MIN(x,y) ((x) > (y) ? (y) : (x))
#endif
+/* What version of GCC is being used. 0 means GCC is not being used .
+** Note that the GCC_VERSION macro will also be set correctly when using
+** clang, since clang works hard to be gcc compatible. So the gcc
+** optimizations will also work when compiling with clang.
+*/
+#ifndef GCC_VERSION
+#if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC)
+# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__)
+#else
+# define GCC_VERSION 0
+#endif
+#endif
+
+/* The testcase() macro should already be defined in the amalgamation. If
+** it is not, make it a no-op.
+*/
+#ifndef SQLITE_AMALGAMATION
+# define testcase(X)
+#endif
+
+/*
+** Macros to determine whether the machine is big or little endian,
+** and whether or not that determination is run-time or compile-time.
+**
+** For best performance, an attempt is made to guess at the byte-order
+** using C-preprocessor macros. If that is unsuccessful, or if
+** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined
+** at run-time.
+*/
+#ifndef SQLITE_BYTEORDER
+#if defined(i386) || defined(__i386__) || defined(_M_IX86) || \
+ defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \
+ defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \
+ defined(__arm__)
+# define SQLITE_BYTEORDER 1234
+#elif defined(sparc) || defined(__ppc__)
+# define SQLITE_BYTEORDER 4321
+#else
+# define SQLITE_BYTEORDER 0 /* 0 means "unknown at compile-time" */
+#endif
+#endif
+
+
+/* What version of MSVC is being used. 0 means MSVC is not being used */
+#ifndef MSVC_VERSION
+#if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC)
+# define MSVC_VERSION _MSC_VER
+#else
+# define MSVC_VERSION 0
+#endif
+#endif
+
/*
** Functions to deserialize a 16 bit integer, 32 bit real number and
** 64 bit integer. The deserialized value is returned.
return (p[0]<<8) + p[1];
}
static void readCoord(u8 *p, RtreeCoord *pCoord){
+ assert( ((((char*)p) - (char*)0)&3)==0 ); /* p is always 4-byte aligned */
+#if SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
+ pCoord->u = _byteswap_ulong(*(u32*)p);
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
+ pCoord->u = __builtin_bswap32(*(u32*)p);
+#elif SQLITE_BYTEORDER==4321
+ pCoord->u = *(u32*)p;
+#else
pCoord->u = (
(((u32)p[0]) << 24) +
(((u32)p[1]) << 16) +
(((u32)p[2]) << 8) +
(((u32)p[3]) << 0)
);
+#endif
}
static i64 readInt64(u8 *p){
- return (
- (((i64)p[0]) << 56) +
- (((i64)p[1]) << 48) +
- (((i64)p[2]) << 40) +
- (((i64)p[3]) << 32) +
- (((i64)p[4]) << 24) +
- (((i64)p[5]) << 16) +
- (((i64)p[6]) << 8) +
- (((i64)p[7]) << 0)
+#if SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
+ u64 x;
+ memcpy(&x, p, 8);
+ return (i64)_byteswap_uint64(x);
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
+ u64 x;
+ memcpy(&x, p, 8);
+ return (i64)__builtin_bswap64(x);
+#elif SQLITE_BYTEORDER==4321
+ i64 x;
+ memcpy(&x, p, 8);
+ return x;
+#else
+ return (i64)(
+ (((u64)p[0]) << 56) +
+ (((u64)p[1]) << 48) +
+ (((u64)p[2]) << 40) +
+ (((u64)p[3]) << 32) +
+ (((u64)p[4]) << 24) +
+ (((u64)p[5]) << 16) +
+ (((u64)p[6]) << 8) +
+ (((u64)p[7]) << 0)
);
+#endif
}
/*
** 64 bit integer. The value returned is the number of bytes written
** to the argument buffer (always 2, 4 and 8 respectively).
*/
-static int writeInt16(u8 *p, int i){
+static void writeInt16(u8 *p, int i){
p[0] = (i>> 8)&0xFF;
p[1] = (i>> 0)&0xFF;
- return 2;
}
static int writeCoord(u8 *p, RtreeCoord *pCoord){
u32 i;
+ assert( ((((char*)p) - (char*)0)&3)==0 ); /* p is always 4-byte aligned */
assert( sizeof(RtreeCoord)==4 );
assert( sizeof(u32)==4 );
+#if SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
+ i = __builtin_bswap32(pCoord->u);
+ memcpy(p, &i, 4);
+#elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
+ i = _byteswap_ulong(pCoord->u);
+ memcpy(p, &i, 4);
+#elif SQLITE_BYTEORDER==4321
+ i = pCoord->u;
+ memcpy(p, &i, 4);
+#else
i = pCoord->u;
p[0] = (i>>24)&0xFF;
p[1] = (i>>16)&0xFF;
p[2] = (i>> 8)&0xFF;
p[3] = (i>> 0)&0xFF;
+#endif
return 4;
}
static int writeInt64(u8 *p, i64 i){
+#if SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
+ i = (i64)__builtin_bswap64((u64)i);
+ memcpy(p, &i, 8);
+#elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
+ i = (i64)_byteswap_uint64((u64)i);
+ memcpy(p, &i, 8);
+#elif SQLITE_BYTEORDER==4321
+ memcpy(p, &i, 8);
+#else
p[0] = (i>>56)&0xFF;
p[1] = (i>>48)&0xFF;
p[2] = (i>>40)&0xFF;
p[5] = (i>>16)&0xFF;
p[6] = (i>> 8)&0xFF;
p[7] = (i>> 0)&0xFF;
+#endif
return 8;
}
return pNode;
}
+/*
+** Clear the Rtree.pNodeBlob object
+*/
+static void nodeBlobReset(Rtree *pRtree){
+ if( pRtree->pNodeBlob && pRtree->inWrTrans==0 && pRtree->nCursor==0 ){
+ sqlite3_blob *pBlob = pRtree->pNodeBlob;
+ pRtree->pNodeBlob = 0;
+ sqlite3_blob_close(pBlob);
+ }
+}
+
/*
** Obtain a reference to an r-tree node.
*/
RtreeNode *pParent, /* Either the parent node or NULL */
RtreeNode **ppNode /* OUT: Acquired node */
){
- int rc;
- int rc2 = SQLITE_OK;
- RtreeNode *pNode;
+ int rc = SQLITE_OK;
+ RtreeNode *pNode = 0;
/* Check if the requested node is already in the hash table. If so,
** increase its reference count and return it.
return SQLITE_OK;
}
- sqlite3_bind_int64(pRtree->pReadNode, 1, iNode);
- rc = sqlite3_step(pRtree->pReadNode);
- if( rc==SQLITE_ROW ){
- const u8 *zBlob = sqlite3_column_blob(pRtree->pReadNode, 0);
- if( pRtree->iNodeSize==sqlite3_column_bytes(pRtree->pReadNode, 0) ){
- pNode = (RtreeNode *)sqlite3_malloc(sizeof(RtreeNode)+pRtree->iNodeSize);
- if( !pNode ){
- rc2 = SQLITE_NOMEM;
- }else{
- pNode->pParent = pParent;
- pNode->zData = (u8 *)&pNode[1];
- pNode->nRef = 1;
- pNode->iNode = iNode;
- pNode->isDirty = 0;
- pNode->pNext = 0;
- memcpy(pNode->zData, zBlob, pRtree->iNodeSize);
- nodeReference(pParent);
- }
+ if( pRtree->pNodeBlob ){
+ sqlite3_blob *pBlob = pRtree->pNodeBlob;
+ pRtree->pNodeBlob = 0;
+ rc = sqlite3_blob_reopen(pBlob, iNode);
+ pRtree->pNodeBlob = pBlob;
+ if( rc ){
+ nodeBlobReset(pRtree);
+ if( rc==SQLITE_NOMEM ) return SQLITE_NOMEM;
+ }
+ }
+ if( pRtree->pNodeBlob==0 ){
+ char *zTab = sqlite3_mprintf("%s_node", pRtree->zName);
+ if( zTab==0 ) return SQLITE_NOMEM;
+ rc = sqlite3_blob_open(pRtree->db, pRtree->zDb, zTab, "data", iNode, 0,
+ &pRtree->pNodeBlob);
+ sqlite3_free(zTab);
+ }
+ if( rc ){
+ nodeBlobReset(pRtree);
+ *ppNode = 0;
+ /* If unable to open an sqlite3_blob on the desired row, that can only
+ ** be because the shadow tables hold erroneous data. */
+ if( rc==SQLITE_ERROR ) rc = SQLITE_CORRUPT_VTAB;
+ }else if( pRtree->iNodeSize==sqlite3_blob_bytes(pRtree->pNodeBlob) ){
+ pNode = (RtreeNode *)sqlite3_malloc(sizeof(RtreeNode)+pRtree->iNodeSize);
+ if( !pNode ){
+ rc = SQLITE_NOMEM;
+ }else{
+ pNode->pParent = pParent;
+ pNode->zData = (u8 *)&pNode[1];
+ pNode->nRef = 1;
+ pNode->iNode = iNode;
+ pNode->isDirty = 0;
+ pNode->pNext = 0;
+ rc = sqlite3_blob_read(pRtree->pNodeBlob, pNode->zData,
+ pRtree->iNodeSize, 0);
+ nodeReference(pParent);
}
}
- rc = sqlite3_reset(pRtree->pReadNode);
- if( rc==SQLITE_OK ) rc = rc2;
/* If the root node was just loaded, set pRtree->iDepth to the height
** of the r-tree structure. A height of zero means all data is stored on
int ii;
u8 *p = &pNode->zData[4 + pRtree->nBytesPerCell*iCell];
p += writeInt64(p, pCell->iRowid);
- for(ii=0; ii<(pRtree->nDim*2); ii++){
+ for(ii=0; ii<pRtree->nDim2; ii++){
p += writeCoord(p, &pCell->aCoord[ii]);
}
pNode->isDirty = 1;
sqlite3_step(p);
pNode->isDirty = 0;
rc = sqlite3_reset(p);
+ sqlite3_bind_null(p, 2);
if( pNode->iNode==0 && rc==SQLITE_OK ){
pNode->iNode = sqlite3_last_insert_rowid(pRtree->db);
nodeHashInsert(pRtree, pNode);
){
u8 *pData;
RtreeCoord *pCoord;
- int ii;
+ int ii = 0;
pCell->iRowid = nodeGetRowid(pRtree, pNode, iCell);
pData = pNode->zData + (12 + pRtree->nBytesPerCell*iCell);
pCoord = pCell->aCoord;
- for(ii=0; ii<pRtree->nDim*2; ii++){
- readCoord(&pData[ii*4], &pCoord[ii]);
- }
+ do{
+ readCoord(pData, &pCoord[ii]);
+ readCoord(pData+4, &pCoord[ii+1]);
+ pData += 8;
+ ii += 2;
+ }while( ii<pRtree->nDim2 );
}
static void rtreeRelease(Rtree *pRtree){
pRtree->nBusy--;
if( pRtree->nBusy==0 ){
- sqlite3_finalize(pRtree->pReadNode);
+ pRtree->inWrTrans = 0;
+ pRtree->nCursor = 0;
+ nodeBlobReset(pRtree);
sqlite3_finalize(pRtree->pWriteNode);
sqlite3_finalize(pRtree->pDeleteNode);
sqlite3_finalize(pRtree->pReadRowid);
if( !zCreate ){
rc = SQLITE_NOMEM;
}else{
+ nodeBlobReset(pRtree);
rc = sqlite3_exec(pRtree->db, zCreate, 0, 0, 0);
sqlite3_free(zCreate);
}
*/
static int rtreeOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){
int rc = SQLITE_NOMEM;
+ Rtree *pRtree = (Rtree *)pVTab;
RtreeCursor *pCsr;
pCsr = (RtreeCursor *)sqlite3_malloc(sizeof(RtreeCursor));
memset(pCsr, 0, sizeof(RtreeCursor));
pCsr->base.pVtab = pVTab;
rc = SQLITE_OK;
+ pRtree->nCursor++;
}
*ppCursor = (sqlite3_vtab_cursor *)pCsr;
Rtree *pRtree = (Rtree *)(cur->pVtab);
int ii;
RtreeCursor *pCsr = (RtreeCursor *)cur;
+ assert( pRtree->nCursor>0 );
freeCursorConstraints(pCsr);
sqlite3_free(pCsr->aPoint);
for(ii=0; ii<RTREE_CACHE_SZ; ii++) nodeRelease(pRtree, pCsr->aNode[ii]);
sqlite3_free(pCsr);
+ pRtree->nCursor--;
+ nodeBlobReset(pRtree);
return SQLITE_OK;
}
** false. a[] is the four bytes of the on-disk record to be decoded.
** Store the results in "r".
**
-** There are three versions of this macro, one each for little-endian and
-** big-endian processors and a third generic implementation. The endian-
-** specific implementations are much faster and are preferred if the
-** processor endianness is known at compile-time. The SQLITE_BYTEORDER
-** macro is part of sqliteInt.h and hence the endian-specific
-** implementation will only be used if this module is compiled as part
-** of the amalgamation.
+** There are five versions of this macro. The last one is generic. The
+** other four are various architectures-specific optimizations.
*/
-#if defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==1234
+#if SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300
+#define RTREE_DECODE_COORD(eInt, a, r) { \
+ RtreeCoord c; /* Coordinate decoded */ \
+ c.u = _byteswap_ulong(*(u32*)a); \
+ r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
+}
+#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000
+#define RTREE_DECODE_COORD(eInt, a, r) { \
+ RtreeCoord c; /* Coordinate decoded */ \
+ c.u = __builtin_bswap32(*(u32*)a); \
+ r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
+}
+#elif SQLITE_BYTEORDER==1234
#define RTREE_DECODE_COORD(eInt, a, r) { \
RtreeCoord c; /* Coordinate decoded */ \
memcpy(&c.u,a,4); \
((c.u&0xff)<<24)|((c.u&0xff00)<<8); \
r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \
}
-#elif defined(SQLITE_BYTEORDER) && SQLITE_BYTEORDER==4321
+#elif SQLITE_BYTEORDER==4321
#define RTREE_DECODE_COORD(eInt, a, r) { \
RtreeCoord c; /* Coordinate decoded */ \
memcpy(&c.u,a,4); \
sqlite3_rtree_dbl *prScore, /* OUT: score for the cell */
int *peWithin /* OUT: visibility of the cell */
){
- int i; /* Loop counter */
sqlite3_rtree_query_info *pInfo = pConstraint->pInfo; /* Callback info */
int nCoord = pInfo->nCoord; /* No. of coordinates */
int rc; /* Callback return code */
+ RtreeCoord c; /* Translator union */
sqlite3_rtree_dbl aCoord[RTREE_MAX_DIMENSIONS*2]; /* Decoded coordinates */
assert( pConstraint->op==RTREE_MATCH || pConstraint->op==RTREE_QUERY );
pInfo->iRowid = readInt64(pCellData);
}
pCellData += 8;
- for(i=0; i<nCoord; i++, pCellData += 4){
- RTREE_DECODE_COORD(eInt, pCellData, aCoord[i]);
+#ifndef SQLITE_RTREE_INT_ONLY
+ if( eInt==0 ){
+ switch( nCoord ){
+ case 10: readCoord(pCellData+36, &c); aCoord[9] = c.f;
+ readCoord(pCellData+32, &c); aCoord[8] = c.f;
+ case 8: readCoord(pCellData+28, &c); aCoord[7] = c.f;
+ readCoord(pCellData+24, &c); aCoord[6] = c.f;
+ case 6: readCoord(pCellData+20, &c); aCoord[5] = c.f;
+ readCoord(pCellData+16, &c); aCoord[4] = c.f;
+ case 4: readCoord(pCellData+12, &c); aCoord[3] = c.f;
+ readCoord(pCellData+8, &c); aCoord[2] = c.f;
+ default: readCoord(pCellData+4, &c); aCoord[1] = c.f;
+ readCoord(pCellData, &c); aCoord[0] = c.f;
+ }
+ }else
+#endif
+ {
+ switch( nCoord ){
+ case 10: readCoord(pCellData+36, &c); aCoord[9] = c.i;
+ readCoord(pCellData+32, &c); aCoord[8] = c.i;
+ case 8: readCoord(pCellData+28, &c); aCoord[7] = c.i;
+ readCoord(pCellData+24, &c); aCoord[6] = c.i;
+ case 6: readCoord(pCellData+20, &c); aCoord[5] = c.i;
+ readCoord(pCellData+16, &c); aCoord[4] = c.i;
+ case 4: readCoord(pCellData+12, &c); aCoord[3] = c.i;
+ readCoord(pCellData+8, &c); aCoord[2] = c.i;
+ default: readCoord(pCellData+4, &c); aCoord[1] = c.i;
+ readCoord(pCellData, &c); aCoord[0] = c.i;
+ }
}
if( pConstraint->op==RTREE_MATCH ){
+ int eWithin = 0;
rc = pConstraint->u.xGeom((sqlite3_rtree_geometry*)pInfo,
- nCoord, aCoord, &i);
- if( i==0 ) *peWithin = NOT_WITHIN;
+ nCoord, aCoord, &eWithin);
+ if( eWithin==0 ) *peWithin = NOT_WITHIN;
*prScore = RTREE_ZERO;
}else{
pInfo->aCoord = aCoord;
assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE
|| p->op==RTREE_GT || p->op==RTREE_EQ );
+ assert( ((((char*)pCellData) - (char*)0)&3)==0 ); /* 4-byte aligned */
switch( p->op ){
case RTREE_LE:
case RTREE_LT:
assert(p->op==RTREE_LE || p->op==RTREE_LT || p->op==RTREE_GE
|| p->op==RTREE_GT || p->op==RTREE_EQ );
pCellData += 8 + p->iCoord*4;
+ assert( ((((char*)pCellData) - (char*)0)&3)==0 ); /* 4-byte aligned */
RTREE_DECODE_COORD(eInt, pCellData, xN);
switch( p->op ){
case RTREE_LE: if( xN <= p->u.rValue ) return; break;
}
/*
-** Interchange to search points in a cursor.
+** Interchange two search points in a cursor.
*/
static void rtreeSearchPointSwap(RtreeCursor *p, int i, int j){
RtreeSearchPoint t = p->aPoint[i];
if( rScore<RTREE_ZERO ) rScore = RTREE_ZERO;
p = rtreeSearchPointNew(pCur, rScore, x.iLevel);
if( p==0 ) return SQLITE_NOMEM;
- p->eWithin = eWithin;
+ p->eWithin = (u8)eWithin;
p->id = x.id;
p->iCell = x.iCell;
RTREE_QUEUE_TRACE(pCur, "PUSH-S:");
if( i==0 ){
sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell));
}else{
- if( rc ) return rc;
nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c);
#ifndef SQLITE_RTREE_INT_ONLY
if( pRtree->eCoordType==RTREE_COORD_REAL32 ){
** operator.
*/
static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){
- RtreeMatchArg *pBlob; /* BLOB returned by geometry function */
+ RtreeMatchArg *pBlob, *pSrc; /* BLOB returned by geometry function */
sqlite3_rtree_query_info *pInfo; /* Callback information */
- int nBlob; /* Size of the geometry function blob */
- int nExpected; /* Expected size of the BLOB */
-
- /* Check that value is actually a blob. */
- if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR;
-
- /* Check that the blob is roughly the right size. */
- nBlob = sqlite3_value_bytes(pValue);
- if( nBlob<(int)sizeof(RtreeMatchArg) ){
- return SQLITE_ERROR;
- }
- pInfo = (sqlite3_rtree_query_info*)sqlite3_malloc( sizeof(*pInfo)+nBlob );
+ pSrc = sqlite3_value_pointer(pValue, "RtreeMatchArg");
+ if( pSrc==0 ) return SQLITE_ERROR;
+ pInfo = (sqlite3_rtree_query_info*)
+ sqlite3_malloc64( sizeof(*pInfo)+pSrc->iSize );
if( !pInfo ) return SQLITE_NOMEM;
memset(pInfo, 0, sizeof(*pInfo));
pBlob = (RtreeMatchArg*)&pInfo[1];
-
- memcpy(pBlob, sqlite3_value_blob(pValue), nBlob);
- nExpected = (int)(sizeof(RtreeMatchArg) +
- pBlob->nParam*sizeof(sqlite3_value*) +
- (pBlob->nParam-1)*sizeof(RtreeDValue));
- if( pBlob->magic!=RTREE_GEOMETRY_MAGIC || nBlob!=nExpected ){
- sqlite3_free(pInfo);
- return SQLITE_ERROR;
- }
+ memcpy(pBlob, pSrc, pSrc->iSize);
pInfo->pContext = pBlob->cb.pContext;
pInfo->nParam = pBlob->nParam;
pInfo->aParam = pBlob->aParam;
if( idxNum==1 ){
/* Special case - lookup by rowid. */
RtreeNode *pLeaf; /* Leaf on which the required cell resides */
- RtreeSearchPoint *p; /* Search point for the the leaf */
+ RtreeSearchPoint *p; /* Search point for the leaf */
i64 iRowid = sqlite3_value_int64(argv[0]);
i64 iNode = 0;
rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode);
p->id = iNode;
p->eWithin = PARTLY_WITHIN;
rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &iCell);
- p->iCell = iCell;
+ p->iCell = (u8)iCell;
RTREE_QUEUE_TRACE(pCsr, "PUSH-F1:");
}else{
pCsr->atEOF = 1;
if( rc!=SQLITE_OK ){
break;
}
- p->pInfo->nCoord = pRtree->nDim*2;
+ p->pInfo->nCoord = pRtree->nDim2;
p->pInfo->anQueue = pCsr->anQueue;
p->pInfo->mxLevel = pRtree->iDepth + 1;
}else{
}
if( rc==SQLITE_OK ){
RtreeSearchPoint *pNew;
- pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, pRtree->iDepth+1);
+ pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, (u8)(pRtree->iDepth+1));
if( pNew==0 ) return SQLITE_NOMEM;
pNew->id = 1;
pNew->iCell = 0;
return rc;
}
-/*
-** Set the pIdxInfo->estimatedRows variable to nRow. Unless this
-** extension is currently being used by a version of SQLite too old to
-** support estimatedRows. In that case this function is a no-op.
-*/
-static void setEstimatedRows(sqlite3_index_info *pIdxInfo, i64 nRow){
-#if SQLITE_VERSION_NUMBER>=3008002
- if( sqlite3_libversion_number()>=3008002 ){
- pIdxInfo->estimatedRows = nRow;
- }
-#endif
-}
-
/*
** Rtree virtual table module xBestIndex method. There are three
** table scan strategies to choose from (in order from most to
** a single row.
*/
pIdxInfo->estimatedCost = 30.0;
- setEstimatedRows(pIdxInfo, 1);
+ pIdxInfo->estimatedRows = 1;
return SQLITE_OK;
}
break;
}
zIdxStr[iIdx++] = op;
- zIdxStr[iIdx++] = p->iColumn - 1 + '0';
+ zIdxStr[iIdx++] = (char)(p->iColumn - 1 + '0');
pIdxInfo->aConstraintUsage[ii].argvIndex = (iIdx/2);
pIdxInfo->aConstraintUsage[ii].omit = 1;
}
return SQLITE_NOMEM;
}
- nRow = pRtree->nRowEst / (iIdx + 1);
+ nRow = pRtree->nRowEst >> (iIdx/2);
pIdxInfo->estimatedCost = (double)6.0 * (double)nRow;
- setEstimatedRows(pIdxInfo, nRow);
+ pIdxInfo->estimatedRows = nRow;
return rc;
}
*/
static RtreeDValue cellArea(Rtree *pRtree, RtreeCell *p){
RtreeDValue area = (RtreeDValue)1;
- int ii;
- for(ii=0; ii<(pRtree->nDim*2); ii+=2){
- area = (area * (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii])));
+ assert( pRtree->nDim>=1 && pRtree->nDim<=5 );
+#ifndef SQLITE_RTREE_INT_ONLY
+ if( pRtree->eCoordType==RTREE_COORD_REAL32 ){
+ switch( pRtree->nDim ){
+ case 5: area = p->aCoord[9].f - p->aCoord[8].f;
+ case 4: area *= p->aCoord[7].f - p->aCoord[6].f;
+ case 3: area *= p->aCoord[5].f - p->aCoord[4].f;
+ case 2: area *= p->aCoord[3].f - p->aCoord[2].f;
+ default: area *= p->aCoord[1].f - p->aCoord[0].f;
+ }
+ }else
+#endif
+ {
+ switch( pRtree->nDim ){
+ case 5: area = p->aCoord[9].i - p->aCoord[8].i;
+ case 4: area *= p->aCoord[7].i - p->aCoord[6].i;
+ case 3: area *= p->aCoord[5].i - p->aCoord[4].i;
+ case 2: area *= p->aCoord[3].i - p->aCoord[2].i;
+ default: area *= p->aCoord[1].i - p->aCoord[0].i;
+ }
}
return area;
}
** of the objects size in each dimension.
*/
static RtreeDValue cellMargin(Rtree *pRtree, RtreeCell *p){
- RtreeDValue margin = (RtreeDValue)0;
- int ii;
- for(ii=0; ii<(pRtree->nDim*2); ii+=2){
+ RtreeDValue margin = 0;
+ int ii = pRtree->nDim2 - 2;
+ do{
margin += (DCOORD(p->aCoord[ii+1]) - DCOORD(p->aCoord[ii]));
- }
+ ii -= 2;
+ }while( ii>=0 );
return margin;
}
** Store the union of cells p1 and p2 in p1.
*/
static void cellUnion(Rtree *pRtree, RtreeCell *p1, RtreeCell *p2){
- int ii;
+ int ii = 0;
if( pRtree->eCoordType==RTREE_COORD_REAL32 ){
- for(ii=0; ii<(pRtree->nDim*2); ii+=2){
+ do{
p1->aCoord[ii].f = MIN(p1->aCoord[ii].f, p2->aCoord[ii].f);
p1->aCoord[ii+1].f = MAX(p1->aCoord[ii+1].f, p2->aCoord[ii+1].f);
- }
+ ii += 2;
+ }while( ii<pRtree->nDim2 );
}else{
- for(ii=0; ii<(pRtree->nDim*2); ii+=2){
+ do{
p1->aCoord[ii].i = MIN(p1->aCoord[ii].i, p2->aCoord[ii].i);
p1->aCoord[ii+1].i = MAX(p1->aCoord[ii+1].i, p2->aCoord[ii+1].i);
- }
+ ii += 2;
+ }while( ii<pRtree->nDim2 );
}
}
static int cellContains(Rtree *pRtree, RtreeCell *p1, RtreeCell *p2){
int ii;
int isInt = (pRtree->eCoordType==RTREE_COORD_INT32);
- for(ii=0; ii<(pRtree->nDim*2); ii+=2){
+ for(ii=0; ii<pRtree->nDim2; ii+=2){
RtreeCoord *a1 = &p1->aCoord[ii];
RtreeCoord *a2 = &p2->aCoord[ii];
if( (!isInt && (a2[0].f<a1[0].f || a2[1].f>a1[1].f))
for(ii=0; ii<nCell; ii++){
int jj;
RtreeDValue o = (RtreeDValue)1;
- for(jj=0; jj<(pRtree->nDim*2); jj+=2){
+ for(jj=0; jj<pRtree->nDim2; jj+=2){
RtreeDValue x1, x2;
x1 = MAX(DCOORD(p->aCoord[jj]), DCOORD(aCell[ii].aCoord[jj]));
x2 = MIN(DCOORD(p->aCoord[jj+1]), DCOORD(aCell[ii].aCoord[jj+1]));
){
int rc;
int ii;
- RtreeNode *pNode;
+ RtreeNode *pNode = 0;
rc = nodeAcquire(pRtree, 1, 0, &pNode);
for(ii=0; rc==SQLITE_OK && ii<(pRtree->iDepth-iHeight); ii++){
int rc; /* Return code */
RtreeNode *pLeaf = 0; /* Leaf node containing record iDelete */
int iCell; /* Index of iDelete cell in pLeaf */
- RtreeNode *pRoot; /* Root node of rtree structure */
+ RtreeNode *pRoot = 0; /* Root node of rtree structure */
/* Obtain a reference to the root node to initialize Rtree.iDepth */
*/
if( rc==SQLITE_OK && pRtree->iDepth>0 && NCELL(pRoot)==1 ){
int rc2;
- RtreeNode *pChild;
+ RtreeNode *pChild = 0;
i64 iChild = nodeGetRowid(pRtree, pRoot, 0);
rc = nodeAcquire(pRtree, iChild, pRoot, &pChild);
if( rc==SQLITE_OK ){
}
#endif /* !defined(SQLITE_RTREE_INT_ONLY) */
+/*
+** A constraint has failed while inserting a row into an rtree table.
+** Assuming no OOM error occurs, this function sets the error message
+** (at pRtree->base.zErrMsg) to an appropriate value and returns
+** SQLITE_CONSTRAINT.
+**
+** Parameter iCol is the index of the leftmost column involved in the
+** constraint failure. If it is 0, then the constraint that failed is
+** the unique constraint on the id column. Otherwise, it is the rtree
+** (c1<=c2) constraint on columns iCol and iCol+1 that has failed.
+**
+** If an OOM occurs, SQLITE_NOMEM is returned instead of SQLITE_CONSTRAINT.
+*/
+static int rtreeConstraintError(Rtree *pRtree, int iCol){
+ sqlite3_stmt *pStmt = 0;
+ char *zSql;
+ int rc;
+
+ assert( iCol==0 || iCol%2 );
+ zSql = sqlite3_mprintf("SELECT * FROM %Q.%Q", pRtree->zDb, pRtree->zName);
+ if( zSql ){
+ rc = sqlite3_prepare_v2(pRtree->db, zSql, -1, &pStmt, 0);
+ }else{
+ rc = SQLITE_NOMEM;
+ }
+ sqlite3_free(zSql);
+
+ if( rc==SQLITE_OK ){
+ if( iCol==0 ){
+ const char *zCol = sqlite3_column_name(pStmt, 0);
+ pRtree->base.zErrMsg = sqlite3_mprintf(
+ "UNIQUE constraint failed: %s.%s", pRtree->zName, zCol
+ );
+ }else{
+ const char *zCol1 = sqlite3_column_name(pStmt, iCol);
+ const char *zCol2 = sqlite3_column_name(pStmt, iCol+1);
+ pRtree->base.zErrMsg = sqlite3_mprintf(
+ "rtree constraint failed: %s.(%s<=%s)", pRtree->zName, zCol1, zCol2
+ );
+ }
+ }
+
+ sqlite3_finalize(pStmt);
+ return (rc==SQLITE_OK ? SQLITE_CONSTRAINT : rc);
+}
+
+
/*
** The xUpdate method for rtree module virtual tables.
** This problem was discovered after years of use, so we silently ignore
** these kinds of misdeclared tables to avoid breaking any legacy.
*/
- assert( nData<=(pRtree->nDim*2 + 3) );
+ assert( nData<=(pRtree->nDim2 + 3) );
#ifndef SQLITE_RTREE_INT_ONLY
if( pRtree->eCoordType==RTREE_COORD_REAL32 ){
cell.aCoord[ii].f = rtreeValueDown(azData[ii+3]);
cell.aCoord[ii+1].f = rtreeValueUp(azData[ii+4]);
if( cell.aCoord[ii].f>cell.aCoord[ii+1].f ){
- rc = SQLITE_CONSTRAINT;
+ rc = rtreeConstraintError(pRtree, ii+1);
goto constraint;
}
}
cell.aCoord[ii].i = sqlite3_value_int(azData[ii+3]);
cell.aCoord[ii+1].i = sqlite3_value_int(azData[ii+4]);
if( cell.aCoord[ii].i>cell.aCoord[ii+1].i ){
- rc = SQLITE_CONSTRAINT;
+ rc = rtreeConstraintError(pRtree, ii+1);
goto constraint;
}
}
if( sqlite3_vtab_on_conflict(pRtree->db)==SQLITE_REPLACE ){
rc = rtreeDeleteRowid(pRtree, cell.iRowid);
}else{
- rc = SQLITE_CONSTRAINT;
+ rc = rtreeConstraintError(pRtree, 0);
goto constraint;
}
}
return rc;
}
+/*
+** Called when a transaction starts.
+*/
+static int rtreeBeginTransaction(sqlite3_vtab *pVtab){
+ Rtree *pRtree = (Rtree *)pVtab;
+ assert( pRtree->inWrTrans==0 );
+ pRtree->inWrTrans++;
+ return SQLITE_OK;
+}
+
+/*
+** Called when a transaction completes (either by COMMIT or ROLLBACK).
+** The sqlite3_blob object should be released at this point.
+*/
+static int rtreeEndTransaction(sqlite3_vtab *pVtab){
+ Rtree *pRtree = (Rtree *)pVtab;
+ pRtree->inWrTrans = 0;
+ nodeBlobReset(pRtree);
+ return SQLITE_OK;
+}
+
/*
** The xRename method for rtree module virtual tables.
*/
, pRtree->zDb, pRtree->zName, zNewName
);
if( zSql ){
+ nodeBlobReset(pRtree);
rc = sqlite3_exec(pRtree->db, zSql, 0, 0, 0);
sqlite3_free(zSql);
}
return rc;
}
+/*
+** The xSavepoint method.
+**
+** This module does not need to do anything to support savepoints. However,
+** it uses this hook to close any open blob handle. This is done because a
+** DROP TABLE command - which fortunately always opens a savepoint - cannot
+** succeed if there are any open blob handles. i.e. if the blob handle were
+** not closed here, the following would fail:
+**
+** BEGIN;
+** INSERT INTO rtree...
+** DROP TABLE <tablename>; -- Would fail with SQLITE_LOCKED
+** COMMIT;
+*/
+static int rtreeSavepoint(sqlite3_vtab *pVtab, int iSavepoint){
+ Rtree *pRtree = (Rtree *)pVtab;
+ int iwt = pRtree->inWrTrans;
+ UNUSED_PARAMETER(iSavepoint);
+ pRtree->inWrTrans = 0;
+ nodeBlobReset(pRtree);
+ pRtree->inWrTrans = iwt;
+ return SQLITE_OK;
+}
+
/*
** This function populates the pRtree->nRowEst variable with an estimate
** of the number of rows in the virtual table. If possible, this is based
int rc;
i64 nRow = 0;
+ rc = sqlite3_table_column_metadata(
+ db, pRtree->zDb, "sqlite_stat1",0,0,0,0,0,0
+ );
+ if( rc!=SQLITE_OK ){
+ pRtree->nRowEst = RTREE_DEFAULT_ROWEST;
+ return rc==SQLITE_ERROR ? SQLITE_OK : rc;
+ }
zSql = sqlite3_mprintf(zFmt, pRtree->zDb, pRtree->zName);
if( zSql==0 ){
rc = SQLITE_NOMEM;
}
static sqlite3_module rtreeModule = {
- 0, /* iVersion */
+ 2, /* iVersion */
rtreeCreate, /* xCreate - create a table */
rtreeConnect, /* xConnect - connect to an existing table */
rtreeBestIndex, /* xBestIndex - Determine search strategy */
rtreeColumn, /* xColumn - read data */
rtreeRowid, /* xRowid - read data */
rtreeUpdate, /* xUpdate - write data */
- 0, /* xBegin - begin transaction */
- 0, /* xSync - sync transaction */
- 0, /* xCommit - commit transaction */
- 0, /* xRollback - rollback transaction */
+ rtreeBeginTransaction, /* xBegin - begin transaction */
+ rtreeEndTransaction, /* xSync - sync transaction */
+ rtreeEndTransaction, /* xCommit - commit transaction */
+ rtreeEndTransaction, /* xRollback - rollback transaction */
0, /* xFindFunction - function overloading */
rtreeRename, /* xRename - rename the table */
- 0, /* xSavepoint */
+ rtreeSavepoint, /* xSavepoint */
0, /* xRelease */
- 0 /* xRollbackTo */
+ 0, /* xRollbackTo */
};
static int rtreeSqlInit(
){
int rc = SQLITE_OK;
- #define N_STATEMENT 9
+ #define N_STATEMENT 8
static const char *azSql[N_STATEMENT] = {
- /* Read and write the xxx_node table */
- "SELECT data FROM '%q'.'%q_node' WHERE nodeno = :1",
+ /* Write the xxx_node table */
"INSERT OR REPLACE INTO '%q'.'%q_node' VALUES(:1, :2)",
"DELETE FROM '%q'.'%q_node' WHERE nodeno = :1",
}
}
- appStmt[0] = &pRtree->pReadNode;
- appStmt[1] = &pRtree->pWriteNode;
- appStmt[2] = &pRtree->pDeleteNode;
- appStmt[3] = &pRtree->pReadRowid;
- appStmt[4] = &pRtree->pWriteRowid;
- appStmt[5] = &pRtree->pDeleteRowid;
- appStmt[6] = &pRtree->pReadParent;
- appStmt[7] = &pRtree->pWriteParent;
- appStmt[8] = &pRtree->pDeleteParent;
+ appStmt[0] = &pRtree->pWriteNode;
+ appStmt[1] = &pRtree->pDeleteNode;
+ appStmt[2] = &pRtree->pReadRowid;
+ appStmt[3] = &pRtree->pWriteRowid;
+ appStmt[4] = &pRtree->pDeleteRowid;
+ appStmt[5] = &pRtree->pReadParent;
+ appStmt[6] = &pRtree->pWriteParent;
+ appStmt[7] = &pRtree->pDeleteParent;
rc = rtreeQueryStat1(db, pRtree);
for(i=0; i<N_STATEMENT && rc==SQLITE_OK; i++){
char *zSql = sqlite3_mprintf(azSql[i], zDb, zPrefix);
if( zSql ){
- rc = sqlite3_prepare_v2(db, zSql, -1, appStmt[i], 0);
+ rc = sqlite3_prepare_v3(db, zSql, -1, SQLITE_PREPARE_PERSISTENT,
+ appStmt[i], 0);
}else{
rc = SQLITE_NOMEM;
}
rc = getIntFromStmt(db, zSql, &pRtree->iNodeSize);
if( rc!=SQLITE_OK ){
*pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db));
+ }else if( pRtree->iNodeSize<(512-64) ){
+ rc = SQLITE_CORRUPT_VTAB;
+ *pzErr = sqlite3_mprintf("undersize RTree blobs in \"%q_node\"",
+ pRtree->zName);
}
}
pRtree->base.pModule = &rtreeModule;
pRtree->zDb = (char *)&pRtree[1];
pRtree->zName = &pRtree->zDb[nDb+1];
- pRtree->nDim = (argc-4)/2;
- pRtree->nBytesPerCell = 8 + pRtree->nDim*4*2;
- pRtree->eCoordType = eCoordType;
+ pRtree->nDim = (u8)((argc-4)/2);
+ pRtree->nDim2 = pRtree->nDim*2;
+ pRtree->nBytesPerCell = 8 + pRtree->nDim2*4;
+ pRtree->eCoordType = (u8)eCoordType;
memcpy(pRtree->zDb, argv[1], nDb);
memcpy(pRtree->zName, argv[2], nName);
UNUSED_PARAMETER(nArg);
memset(&node, 0, sizeof(RtreeNode));
memset(&tree, 0, sizeof(Rtree));
- tree.nDim = sqlite3_value_int(apArg[0]);
+ tree.nDim = (u8)sqlite3_value_int(apArg[0]);
+ tree.nDim2 = tree.nDim*2;
tree.nBytesPerCell = 8 + 8 * tree.nDim;
node.zData = (u8 *)sqlite3_value_blob(apArg[1]);
nodeGetCell(&tree, &node, ii, &cell);
sqlite3_snprintf(512-nCell,&zCell[nCell],"%lld", cell.iRowid);
nCell = (int)strlen(zCell);
- for(jj=0; jj<tree.nDim*2; jj++){
+ for(jj=0; jj<tree.nDim2; jj++){
#ifndef SQLITE_RTREE_INT_ONLY
sqlite3_snprintf(512-nCell,&zCell[nCell], " %g",
(double)cell.aCoord[jj].f);
}
}
+/*
+** Context object passed between the various routines that make up the
+** implementation of integrity-check function rtreecheck().
+*/
+typedef struct RtreeCheck RtreeCheck;
+struct RtreeCheck {
+ sqlite3 *db; /* Database handle */
+ const char *zDb; /* Database containing rtree table */
+ const char *zTab; /* Name of rtree table */
+ int bInt; /* True for rtree_i32 table */
+ int nDim; /* Number of dimensions for this rtree tbl */
+ sqlite3_stmt *pGetNode; /* Statement used to retrieve nodes */
+ sqlite3_stmt *aCheckMapping[2]; /* Statements to query %_parent/%_rowid */
+ int nLeaf; /* Number of leaf cells in table */
+ int nNonLeaf; /* Number of non-leaf cells in table */
+ int rc; /* Return code */
+ char *zReport; /* Message to report */
+ int nErr; /* Number of lines in zReport */
+};
+
+#define RTREE_CHECK_MAX_ERROR 100
+
+/*
+** Reset SQL statement pStmt. If the sqlite3_reset() call returns an error,
+** and RtreeCheck.rc==SQLITE_OK, set RtreeCheck.rc to the error code.
+*/
+static void rtreeCheckReset(RtreeCheck *pCheck, sqlite3_stmt *pStmt){
+ int rc = sqlite3_reset(pStmt);
+ if( pCheck->rc==SQLITE_OK ) pCheck->rc = rc;
+}
+
+/*
+** The second and subsequent arguments to this function are a format string
+** and printf style arguments. This function formats the string and attempts
+** to compile it as an SQL statement.
+**
+** If successful, a pointer to the new SQL statement is returned. Otherwise,
+** NULL is returned and an error code left in RtreeCheck.rc.
+*/
+static sqlite3_stmt *rtreeCheckPrepare(
+ RtreeCheck *pCheck, /* RtreeCheck object */
+ const char *zFmt, ... /* Format string and trailing args */
+){
+ va_list ap;
+ char *z;
+ sqlite3_stmt *pRet = 0;
+
+ va_start(ap, zFmt);
+ z = sqlite3_vmprintf(zFmt, ap);
+
+ if( pCheck->rc==SQLITE_OK ){
+ if( z==0 ){
+ pCheck->rc = SQLITE_NOMEM;
+ }else{
+ pCheck->rc = sqlite3_prepare_v2(pCheck->db, z, -1, &pRet, 0);
+ }
+ }
+
+ sqlite3_free(z);
+ va_end(ap);
+ return pRet;
+}
+
+/*
+** The second and subsequent arguments to this function are a printf()
+** style format string and arguments. This function formats the string and
+** appends it to the report being accumuated in pCheck.
+*/
+static void rtreeCheckAppendMsg(RtreeCheck *pCheck, const char *zFmt, ...){
+ va_list ap;
+ va_start(ap, zFmt);
+ if( pCheck->rc==SQLITE_OK && pCheck->nErr<RTREE_CHECK_MAX_ERROR ){
+ char *z = sqlite3_vmprintf(zFmt, ap);
+ if( z==0 ){
+ pCheck->rc = SQLITE_NOMEM;
+ }else{
+ pCheck->zReport = sqlite3_mprintf("%z%s%z",
+ pCheck->zReport, (pCheck->zReport ? "\n" : ""), z
+ );
+ if( pCheck->zReport==0 ){
+ pCheck->rc = SQLITE_NOMEM;
+ }
+ }
+ pCheck->nErr++;
+ }
+ va_end(ap);
+}
+
+/*
+** This function is a no-op if there is already an error code stored
+** in the RtreeCheck object indicated by the first argument. NULL is
+** returned in this case.
+**
+** Otherwise, the contents of rtree table node iNode are loaded from
+** the database and copied into a buffer obtained from sqlite3_malloc().
+** If no error occurs, a pointer to the buffer is returned and (*pnNode)
+** is set to the size of the buffer in bytes.
+**
+** Or, if an error does occur, NULL is returned and an error code left
+** in the RtreeCheck object. The final value of *pnNode is undefined in
+** this case.
+*/
+static u8 *rtreeCheckGetNode(RtreeCheck *pCheck, i64 iNode, int *pnNode){
+ u8 *pRet = 0; /* Return value */
+
+ assert( pCheck->rc==SQLITE_OK );
+ if( pCheck->pGetNode==0 ){
+ pCheck->pGetNode = rtreeCheckPrepare(pCheck,
+ "SELECT data FROM %Q.'%q_node' WHERE nodeno=?",
+ pCheck->zDb, pCheck->zTab
+ );
+ }
+
+ if( pCheck->rc==SQLITE_OK ){
+ sqlite3_bind_int64(pCheck->pGetNode, 1, iNode);
+ if( sqlite3_step(pCheck->pGetNode)==SQLITE_ROW ){
+ int nNode = sqlite3_column_bytes(pCheck->pGetNode, 0);
+ const u8 *pNode = (const u8*)sqlite3_column_blob(pCheck->pGetNode, 0);
+ pRet = sqlite3_malloc(nNode);
+ if( pRet==0 ){
+ pCheck->rc = SQLITE_NOMEM;
+ }else{
+ memcpy(pRet, pNode, nNode);
+ *pnNode = nNode;
+ }
+ }
+ rtreeCheckReset(pCheck, pCheck->pGetNode);
+ if( pCheck->rc==SQLITE_OK && pRet==0 ){
+ rtreeCheckAppendMsg(pCheck, "Node %lld missing from database", iNode);
+ }
+ }
+
+ return pRet;
+}
+
+/*
+** This function is used to check that the %_parent (if bLeaf==0) or %_rowid
+** (if bLeaf==1) table contains a specified entry. The schemas of the
+** two tables are:
+**
+** CREATE TABLE %_parent(nodeno INTEGER PRIMARY KEY, parentnode INTEGER)
+** CREATE TABLE %_rowid(rowid INTEGER PRIMARY KEY, nodeno INTEGER)
+**
+** In both cases, this function checks that there exists an entry with
+** IPK value iKey and the second column set to iVal.
+**
+*/
+static void rtreeCheckMapping(
+ RtreeCheck *pCheck, /* RtreeCheck object */
+ int bLeaf, /* True for a leaf cell, false for interior */
+ i64 iKey, /* Key for mapping */
+ i64 iVal /* Expected value for mapping */
+){
+ int rc;
+ sqlite3_stmt *pStmt;
+ const char *azSql[2] = {
+ "SELECT parentnode FROM %Q.'%q_parent' WHERE nodeno=?",
+ "SELECT nodeno FROM %Q.'%q_rowid' WHERE rowid=?"
+ };
+
+ assert( bLeaf==0 || bLeaf==1 );
+ if( pCheck->aCheckMapping[bLeaf]==0 ){
+ pCheck->aCheckMapping[bLeaf] = rtreeCheckPrepare(pCheck,
+ azSql[bLeaf], pCheck->zDb, pCheck->zTab
+ );
+ }
+ if( pCheck->rc!=SQLITE_OK ) return;
+
+ pStmt = pCheck->aCheckMapping[bLeaf];
+ sqlite3_bind_int64(pStmt, 1, iKey);
+ rc = sqlite3_step(pStmt);
+ if( rc==SQLITE_DONE ){
+ rtreeCheckAppendMsg(pCheck, "Mapping (%lld -> %lld) missing from %s table",
+ iKey, iVal, (bLeaf ? "%_rowid" : "%_parent")
+ );
+ }else if( rc==SQLITE_ROW ){
+ i64 ii = sqlite3_column_int64(pStmt, 0);
+ if( ii!=iVal ){
+ rtreeCheckAppendMsg(pCheck,
+ "Found (%lld -> %lld) in %s table, expected (%lld -> %lld)",
+ iKey, ii, (bLeaf ? "%_rowid" : "%_parent"), iKey, iVal
+ );
+ }
+ }
+ rtreeCheckReset(pCheck, pStmt);
+}
+
+/*
+** Argument pCell points to an array of coordinates stored on an rtree page.
+** This function checks that the coordinates are internally consistent (no
+** x1>x2 conditions) and adds an error message to the RtreeCheck object
+** if they are not.
+**
+** Additionally, if pParent is not NULL, then it is assumed to point to
+** the array of coordinates on the parent page that bound the page
+** containing pCell. In this case it is also verified that the two
+** sets of coordinates are mutually consistent and an error message added
+** to the RtreeCheck object if they are not.
+*/
+static void rtreeCheckCellCoord(
+ RtreeCheck *pCheck,
+ i64 iNode, /* Node id to use in error messages */
+ int iCell, /* Cell number to use in error messages */
+ u8 *pCell, /* Pointer to cell coordinates */
+ u8 *pParent /* Pointer to parent coordinates */
+){
+ RtreeCoord c1, c2;
+ RtreeCoord p1, p2;
+ int i;
+
+ for(i=0; i<pCheck->nDim; i++){
+ readCoord(&pCell[4*2*i], &c1);
+ readCoord(&pCell[4*(2*i + 1)], &c2);
+
+ /* printf("%e, %e\n", c1.u.f, c2.u.f); */
+ if( pCheck->bInt ? c1.i>c2.i : c1.f>c2.f ){
+ rtreeCheckAppendMsg(pCheck,
+ "Dimension %d of cell %d on node %lld is corrupt", i, iCell, iNode
+ );
+ }
+
+ if( pParent ){
+ readCoord(&pParent[4*2*i], &p1);
+ readCoord(&pParent[4*(2*i + 1)], &p2);
+
+ if( (pCheck->bInt ? c1.i<p1.i : c1.f<p1.f)
+ || (pCheck->bInt ? c2.i>p2.i : c2.f>p2.f)
+ ){
+ rtreeCheckAppendMsg(pCheck,
+ "Dimension %d of cell %d on node %lld is corrupt relative to parent"
+ , i, iCell, iNode
+ );
+ }
+ }
+ }
+}
+
+/*
+** Run rtreecheck() checks on node iNode, which is at depth iDepth within
+** the r-tree structure. Argument aParent points to the array of coordinates
+** that bound node iNode on the parent node.
+**
+** If any problems are discovered, an error message is appended to the
+** report accumulated in the RtreeCheck object.
+*/
+static void rtreeCheckNode(
+ RtreeCheck *pCheck,
+ int iDepth, /* Depth of iNode (0==leaf) */
+ u8 *aParent, /* Buffer containing parent coords */
+ i64 iNode /* Node to check */
+){
+ u8 *aNode = 0;
+ int nNode = 0;
+
+ assert( iNode==1 || aParent!=0 );
+ assert( pCheck->nDim>0 );
+
+ aNode = rtreeCheckGetNode(pCheck, iNode, &nNode);
+ if( aNode ){
+ if( nNode<4 ){
+ rtreeCheckAppendMsg(pCheck,
+ "Node %lld is too small (%d bytes)", iNode, nNode
+ );
+ }else{
+ int nCell; /* Number of cells on page */
+ int i; /* Used to iterate through cells */
+ if( aParent==0 ){
+ iDepth = readInt16(aNode);
+ if( iDepth>RTREE_MAX_DEPTH ){
+ rtreeCheckAppendMsg(pCheck, "Rtree depth out of range (%d)", iDepth);
+ sqlite3_free(aNode);
+ return;
+ }
+ }
+ nCell = readInt16(&aNode[2]);
+ if( (4 + nCell*(8 + pCheck->nDim*2*4))>nNode ){
+ rtreeCheckAppendMsg(pCheck,
+ "Node %lld is too small for cell count of %d (%d bytes)",
+ iNode, nCell, nNode
+ );
+ }else{
+ for(i=0; i<nCell; i++){
+ u8 *pCell = &aNode[4 + i*(8 + pCheck->nDim*2*4)];
+ i64 iVal = readInt64(pCell);
+ rtreeCheckCellCoord(pCheck, iNode, i, &pCell[8], aParent);
+
+ if( iDepth>0 ){
+ rtreeCheckMapping(pCheck, 0, iVal, iNode);
+ rtreeCheckNode(pCheck, iDepth-1, &pCell[8], iVal);
+ pCheck->nNonLeaf++;
+ }else{
+ rtreeCheckMapping(pCheck, 1, iVal, iNode);
+ pCheck->nLeaf++;
+ }
+ }
+ }
+ }
+ sqlite3_free(aNode);
+ }
+}
+
+/*
+** The second argument to this function must be either "_rowid" or
+** "_parent". This function checks that the number of entries in the
+** %_rowid or %_parent table is exactly nExpect. If not, it adds
+** an error message to the report in the RtreeCheck object indicated
+** by the first argument.
+*/
+static void rtreeCheckCount(RtreeCheck *pCheck, const char *zTbl, i64 nExpect){
+ if( pCheck->rc==SQLITE_OK ){
+ sqlite3_stmt *pCount;
+ pCount = rtreeCheckPrepare(pCheck, "SELECT count(*) FROM %Q.'%q%s'",
+ pCheck->zDb, pCheck->zTab, zTbl
+ );
+ if( pCount ){
+ if( sqlite3_step(pCount)==SQLITE_ROW ){
+ i64 nActual = sqlite3_column_int64(pCount, 0);
+ if( nActual!=nExpect ){
+ rtreeCheckAppendMsg(pCheck, "Wrong number of entries in %%%s table"
+ " - expected %lld, actual %lld" , zTbl, nExpect, nActual
+ );
+ }
+ }
+ pCheck->rc = sqlite3_finalize(pCount);
+ }
+ }
+}
+
+/*
+** This function does the bulk of the work for the rtree integrity-check.
+** It is called by rtreecheck(), which is the SQL function implementation.
+*/
+static int rtreeCheckTable(
+ sqlite3 *db, /* Database handle to access db through */
+ const char *zDb, /* Name of db ("main", "temp" etc.) */
+ const char *zTab, /* Name of rtree table to check */
+ char **pzReport /* OUT: sqlite3_malloc'd report text */
+){
+ RtreeCheck check; /* Common context for various routines */
+ sqlite3_stmt *pStmt = 0; /* Used to find column count of rtree table */
+ int bEnd = 0; /* True if transaction should be closed */
+
+ /* Initialize the context object */
+ memset(&check, 0, sizeof(check));
+ check.db = db;
+ check.zDb = zDb;
+ check.zTab = zTab;
+
+ /* If there is not already an open transaction, open one now. This is
+ ** to ensure that the queries run as part of this integrity-check operate
+ ** on a consistent snapshot. */
+ if( sqlite3_get_autocommit(db) ){
+ check.rc = sqlite3_exec(db, "BEGIN", 0, 0, 0);
+ bEnd = 1;
+ }
+
+ /* Find number of dimensions in the rtree table. */
+ pStmt = rtreeCheckPrepare(&check, "SELECT * FROM %Q.%Q", zDb, zTab);
+ if( pStmt ){
+ int rc;
+ check.nDim = (sqlite3_column_count(pStmt) - 1) / 2;
+ if( check.nDim<1 ){
+ rtreeCheckAppendMsg(&check, "Schema corrupt or not an rtree");
+ }else if( SQLITE_ROW==sqlite3_step(pStmt) ){
+ check.bInt = (sqlite3_column_type(pStmt, 1)==SQLITE_INTEGER);
+ }
+ rc = sqlite3_finalize(pStmt);
+ if( rc!=SQLITE_CORRUPT ) check.rc = rc;
+ }
+
+ /* Do the actual integrity-check */
+ if( check.nDim>=1 ){
+ if( check.rc==SQLITE_OK ){
+ rtreeCheckNode(&check, 0, 0, 1);
+ }
+ rtreeCheckCount(&check, "_rowid", check.nLeaf);
+ rtreeCheckCount(&check, "_parent", check.nNonLeaf);
+ }
+
+ /* Finalize SQL statements used by the integrity-check */
+ sqlite3_finalize(check.pGetNode);
+ sqlite3_finalize(check.aCheckMapping[0]);
+ sqlite3_finalize(check.aCheckMapping[1]);
+
+ /* If one was opened, close the transaction */
+ if( bEnd ){
+ int rc = sqlite3_exec(db, "END", 0, 0, 0);
+ if( check.rc==SQLITE_OK ) check.rc = rc;
+ }
+ *pzReport = check.zReport;
+ return check.rc;
+}
+
+/*
+** Usage:
+**
+** rtreecheck(<rtree-table>);
+** rtreecheck(<database>, <rtree-table>);
+**
+** Invoking this SQL function runs an integrity-check on the named rtree
+** table. The integrity-check verifies the following:
+**
+** 1. For each cell in the r-tree structure (%_node table), that:
+**
+** a) for each dimension, (coord1 <= coord2).
+**
+** b) unless the cell is on the root node, that the cell is bounded
+** by the parent cell on the parent node.
+**
+** c) for leaf nodes, that there is an entry in the %_rowid
+** table corresponding to the cell's rowid value that
+** points to the correct node.
+**
+** d) for cells on non-leaf nodes, that there is an entry in the
+** %_parent table mapping from the cell's child node to the
+** node that it resides on.
+**
+** 2. That there are the same number of entries in the %_rowid table
+** as there are leaf cells in the r-tree structure, and that there
+** is a leaf cell that corresponds to each entry in the %_rowid table.
+**
+** 3. That there are the same number of entries in the %_parent table
+** as there are non-leaf cells in the r-tree structure, and that
+** there is a non-leaf cell that corresponds to each entry in the
+** %_parent table.
+*/
+static void rtreecheck(
+ sqlite3_context *ctx,
+ int nArg,
+ sqlite3_value **apArg
+){
+ if( nArg!=1 && nArg!=2 ){
+ sqlite3_result_error(ctx,
+ "wrong number of arguments to function rtreecheck()", -1
+ );
+ }else{
+ int rc;
+ char *zReport = 0;
+ const char *zDb = (const char*)sqlite3_value_text(apArg[0]);
+ const char *zTab;
+ if( nArg==1 ){
+ zTab = zDb;
+ zDb = "main";
+ }else{
+ zTab = (const char*)sqlite3_value_text(apArg[1]);
+ }
+ rc = rtreeCheckTable(sqlite3_context_db_handle(ctx), zDb, zTab, &zReport);
+ if( rc==SQLITE_OK ){
+ sqlite3_result_text(ctx, zReport ? zReport : "ok", -1, SQLITE_TRANSIENT);
+ }else{
+ sqlite3_result_error_code(ctx, rc);
+ }
+ sqlite3_free(zReport);
+ }
+}
+
+
/*
** Register the r-tree module with database handle db. This creates the
** virtual table module "rtree" and the debugging/analysis scalar
if( rc==SQLITE_OK ){
rc = sqlite3_create_function(db, "rtreedepth", 1, utf8, 0,rtreedepth, 0, 0);
}
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_create_function(db, "rtreecheck", -1, utf8, 0,rtreecheck, 0,0);
+ }
if( rc==SQLITE_OK ){
#ifdef SQLITE_RTREE_INT_ONLY
void *c = (void *)RTREE_COORD_INT32;
sqlite3_result_error_nomem(ctx);
}else{
int i;
- pBlob->magic = RTREE_GEOMETRY_MAGIC;
+ pBlob->iSize = nBlob;
pBlob->cb = pGeomCtx[0];
pBlob->apSqlParam = (sqlite3_value**)&pBlob->aParam[nArg];
pBlob->nParam = nArg;
sqlite3_result_error_nomem(ctx);
rtreeMatchArgFree(pBlob);
}else{
- sqlite3_result_blob(ctx, pBlob, nBlob, rtreeMatchArgFree);
+ sqlite3_result_pointer(ctx, pBlob, "RtreeMatchArg", rtreeMatchArgFree);
}
}
}
/*
** Register a new geometry function for use with the r-tree MATCH operator.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
sqlite3 *db, /* Register SQL function on this connection */
const char *zGeom, /* Name of the new SQL function */
int (*xGeom)(sqlite3_rtree_geometry*,int,RtreeDValue*,int*), /* Callback */
** Register a new 2nd-generation geometry function for use with the
** r-tree MATCH operator.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
sqlite3 *db, /* Register SQL function on this connection */
const char *zQueryFunc, /* Name of new SQL function */
int (*xQueryFunc)(sqlite3_rtree_query_info*), /* Callback */
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_init(
+SQLITE_API int sqlite3_rtree_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
** provide case-independent matching.
*/
-#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU)
+#if !defined(SQLITE_CORE) \
+ || defined(SQLITE_ENABLE_ICU) \
+ || defined(SQLITE_ENABLE_ICU_COLLATIONS)
/* Include ICU headers */
#include <unicode/utypes.h>
/* #include "sqlite3.h" */
#endif
+/*
+** This function is called when an ICU function called from within
+** the implementation of an SQL scalar function returns an error.
+**
+** The scalar function context passed as the first argument is
+** loaded with an error message based on the following two args.
+*/
+static void icuFunctionError(
+ sqlite3_context *pCtx, /* SQLite scalar function context */
+ const char *zName, /* Name of ICU function that failed */
+ UErrorCode e /* Error code returned by ICU function */
+){
+ char zBuf[128];
+ sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e));
+ zBuf[127] = '\0';
+ sqlite3_result_error(pCtx, zBuf, -1);
+}
+
+#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU)
+
/*
** Maximum length (in bytes) of the pattern in a LIKE or GLOB
** operator.
sqlite3_free(p);
}
+/*
+** This lookup table is used to help decode the first byte of
+** a multi-byte UTF8 character. It is copied here from SQLite source
+** code file utf8.c.
+*/
+static const unsigned char icuUtf8Trans1[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00,
+};
+
+#define SQLITE_ICU_READ_UTF8(zIn, c) \
+ c = *(zIn++); \
+ if( c>=0xc0 ){ \
+ c = icuUtf8Trans1[c-0xc0]; \
+ while( (*zIn & 0xc0)==0x80 ){ \
+ c = (c<<6) + (0x3f & *(zIn++)); \
+ } \
+ }
+
+#define SQLITE_ICU_SKIP_UTF8(zIn) \
+ assert( *zIn ); \
+ if( *(zIn++)>=0xc0 ){ \
+ while( (*zIn & 0xc0)==0x80 ){zIn++;} \
+ }
+
+
/*
** Compare two UTF-8 strings for equality where the first string is
** a "LIKE" expression. Return true (1) if they are the same and
const uint8_t *zString, /* The UTF-8 string to compare against */
const UChar32 uEsc /* The escape character */
){
- static const int MATCH_ONE = (UChar32)'_';
- static const int MATCH_ALL = (UChar32)'%';
-
- int iPattern = 0; /* Current byte index in zPattern */
- int iString = 0; /* Current byte index in zString */
+ static const uint32_t MATCH_ONE = (uint32_t)'_';
+ static const uint32_t MATCH_ALL = (uint32_t)'%';
int prevEscape = 0; /* True if the previous character was uEsc */
- while( zPattern[iPattern]!=0 ){
+ while( 1 ){
/* Read (and consume) the next character from the input pattern. */
- UChar32 uPattern;
- U8_NEXT_UNSAFE(zPattern, iPattern, uPattern);
+ uint32_t uPattern;
+ SQLITE_ICU_READ_UTF8(zPattern, uPattern);
+ if( uPattern==0 ) break;
/* There are now 4 possibilities:
**
** MATCH_ALL. For each MATCH_ONE, skip one character in the
** test string.
*/
- while( (c=zPattern[iPattern]) == MATCH_ALL || c == MATCH_ONE ){
+ while( (c=*zPattern) == MATCH_ALL || c == MATCH_ONE ){
if( c==MATCH_ONE ){
- if( zString[iString]==0 ) return 0;
- U8_FWD_1_UNSAFE(zString, iString);
+ if( *zString==0 ) return 0;
+ SQLITE_ICU_SKIP_UTF8(zString);
}
- iPattern++;
+ zPattern++;
}
- if( zPattern[iPattern]==0 ) return 1;
+ if( *zPattern==0 ) return 1;
- while( zString[iString] ){
- if( icuLikeCompare(&zPattern[iPattern], &zString[iString], uEsc) ){
+ while( *zString ){
+ if( icuLikeCompare(zPattern, zString, uEsc) ){
return 1;
}
- U8_FWD_1_UNSAFE(zString, iString);
+ SQLITE_ICU_SKIP_UTF8(zString);
}
return 0;
}else if( !prevEscape && uPattern==MATCH_ONE ){
/* Case 2. */
- if( zString[iString]==0 ) return 0;
- U8_FWD_1_UNSAFE(zString, iString);
+ if( *zString==0 ) return 0;
+ SQLITE_ICU_SKIP_UTF8(zString);
- }else if( !prevEscape && uPattern==uEsc){
+ }else if( !prevEscape && uPattern==(uint32_t)uEsc){
/* Case 3. */
prevEscape = 1;
}else{
/* Case 4. */
- UChar32 uString;
- U8_NEXT_UNSAFE(zString, iString, uString);
- uString = u_foldCase(uString, U_FOLD_CASE_DEFAULT);
- uPattern = u_foldCase(uPattern, U_FOLD_CASE_DEFAULT);
+ uint32_t uString;
+ SQLITE_ICU_READ_UTF8(zString, uString);
+ uString = (uint32_t)u_foldCase((UChar32)uString, U_FOLD_CASE_DEFAULT);
+ uPattern = (uint32_t)u_foldCase((UChar32)uPattern, U_FOLD_CASE_DEFAULT);
if( uString!=uPattern ){
return 0;
}
}
}
- return zString[iString]==0;
+ return *zString==0;
}
/*
}
}
-/*
-** This function is called when an ICU function called from within
-** the implementation of an SQL scalar function returns an error.
-**
-** The scalar function context passed as the first argument is
-** loaded with an error message based on the following two args.
-*/
-static void icuFunctionError(
- sqlite3_context *pCtx, /* SQLite scalar function context */
- const char *zName, /* Name of ICU function that failed */
- UErrorCode e /* Error code returned by ICU function */
-){
- char zBuf[128];
- sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e));
- zBuf[127] = '\0';
- sqlite3_result_error(pCtx, zBuf, -1);
-}
-
/*
** Function to delete compiled regexp objects. Registered as
** a destructor function with sqlite3_set_auxdata().
** of upper() or lower().
**
** lower('I', 'en_us') -> 'i'
-** lower('I', 'tr_tr') -> 'ı' (small dotless i)
+** lower('I', 'tr_tr') -> '\u131' (small dotless i)
**
** http://www.icu-project.org/userguide/posix.html#case_mappings
*/
static void icuCaseFunc16(sqlite3_context *p, int nArg, sqlite3_value **apArg){
- const UChar *zInput;
- UChar *zOutput;
- int nInput;
- int nOutput;
-
- UErrorCode status = U_ZERO_ERROR;
+ const UChar *zInput; /* Pointer to input string */
+ UChar *zOutput = 0; /* Pointer to output buffer */
+ int nInput; /* Size of utf-16 input string in bytes */
+ int nOut; /* Size of output buffer in bytes */
+ int cnt;
+ int bToUpper; /* True for toupper(), false for tolower() */
+ UErrorCode status;
const char *zLocale = 0;
assert(nArg==1 || nArg==2);
+ bToUpper = (sqlite3_user_data(p)!=0);
if( nArg==2 ){
zLocale = (const char *)sqlite3_value_text(apArg[1]);
}
if( !zInput ){
return;
}
- nInput = sqlite3_value_bytes16(apArg[0]);
-
- nOutput = nInput * 2 + 2;
- zOutput = sqlite3_malloc(nOutput);
- if( !zOutput ){
+ nOut = nInput = sqlite3_value_bytes16(apArg[0]);
+ if( nOut==0 ){
+ sqlite3_result_text16(p, "", 0, SQLITE_STATIC);
return;
}
- if( sqlite3_user_data(p) ){
- u_strToUpper(zOutput, nOutput/2, zInput, nInput/2, zLocale, &status);
- }else{
- u_strToLower(zOutput, nOutput/2, zInput, nInput/2, zLocale, &status);
- }
+ for(cnt=0; cnt<2; cnt++){
+ UChar *zNew = sqlite3_realloc(zOutput, nOut);
+ if( zNew==0 ){
+ sqlite3_free(zOutput);
+ sqlite3_result_error_nomem(p);
+ return;
+ }
+ zOutput = zNew;
+ status = U_ZERO_ERROR;
+ if( bToUpper ){
+ nOut = 2*u_strToUpper(zOutput,nOut/2,zInput,nInput/2,zLocale,&status);
+ }else{
+ nOut = 2*u_strToLower(zOutput,nOut/2,zInput,nInput/2,zLocale,&status);
+ }
- if( !U_SUCCESS(status) ){
- icuFunctionError(p, "u_strToLower()/u_strToUpper", status);
+ if( U_SUCCESS(status) ){
+ sqlite3_result_text16(p, zOutput, nOut, xFree);
+ }else if( status==U_BUFFER_OVERFLOW_ERROR ){
+ assert( cnt==0 );
+ continue;
+ }else{
+ icuFunctionError(p, bToUpper ? "u_strToUpper" : "u_strToLower", status);
+ }
return;
}
-
- sqlite3_result_text16(p, zOutput, -1, xFree);
+ assert( 0 ); /* Unreachable */
}
+#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */
+
/*
** Collation sequence destructor function. The pCtx argument points to
** a UCollator structure previously allocated using ucol_open().
** Register the ICU extension functions with database db.
*/
SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db){
- struct IcuScalar {
+ static const struct IcuScalar {
const char *zName; /* Function name */
- int nArg; /* Number of arguments */
- int enc; /* Optimal text encoding */
- void *pContext; /* sqlite3_user_data() context */
+ unsigned char nArg; /* Number of arguments */
+ unsigned short enc; /* Optimal text encoding */
+ unsigned char iContext; /* sqlite3_user_data() context */
void (*xFunc)(sqlite3_context*,int,sqlite3_value**);
} scalars[] = {
- {"regexp", 2, SQLITE_ANY, 0, icuRegexpFunc},
-
- {"lower", 1, SQLITE_UTF16, 0, icuCaseFunc16},
- {"lower", 2, SQLITE_UTF16, 0, icuCaseFunc16},
- {"upper", 1, SQLITE_UTF16, (void*)1, icuCaseFunc16},
- {"upper", 2, SQLITE_UTF16, (void*)1, icuCaseFunc16},
-
- {"lower", 1, SQLITE_UTF8, 0, icuCaseFunc16},
- {"lower", 2, SQLITE_UTF8, 0, icuCaseFunc16},
- {"upper", 1, SQLITE_UTF8, (void*)1, icuCaseFunc16},
- {"upper", 2, SQLITE_UTF8, (void*)1, icuCaseFunc16},
-
- {"like", 2, SQLITE_UTF8, 0, icuLikeFunc},
- {"like", 3, SQLITE_UTF8, 0, icuLikeFunc},
-
- {"icu_load_collation", 2, SQLITE_UTF8, (void*)db, icuLoadCollation},
+ {"icu_load_collation", 2, SQLITE_UTF8, 1, icuLoadCollation},
+#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU)
+ {"regexp", 2, SQLITE_ANY|SQLITE_DETERMINISTIC, 0, icuRegexpFunc},
+ {"lower", 1, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16},
+ {"lower", 2, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16},
+ {"upper", 1, SQLITE_UTF16|SQLITE_DETERMINISTIC, 1, icuCaseFunc16},
+ {"upper", 2, SQLITE_UTF16|SQLITE_DETERMINISTIC, 1, icuCaseFunc16},
+ {"lower", 1, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuCaseFunc16},
+ {"lower", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuCaseFunc16},
+ {"upper", 1, SQLITE_UTF8|SQLITE_DETERMINISTIC, 1, icuCaseFunc16},
+ {"upper", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 1, icuCaseFunc16},
+ {"like", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc},
+ {"like", 3, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc},
+#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */
};
-
int rc = SQLITE_OK;
int i;
-
+
for(i=0; rc==SQLITE_OK && i<(int)(sizeof(scalars)/sizeof(scalars[0])); i++){
- struct IcuScalar *p = &scalars[i];
+ const struct IcuScalar *p = &scalars[i];
rc = sqlite3_create_function(
- db, p->zName, p->nArg, p->enc, p->pContext, p->xFunc, 0, 0
+ db, p->zName, p->nArg, p->enc,
+ p->iContext ? (void*)db : (void*)0,
+ p->xFunc, 0, 0
);
}
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_icu_init(
+SQLITE_API int sqlite3_icu_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
** may also be named data<integer>_<target>, where <integer> is any sequence
** of zero or more numeric characters (0-9). This can be significant because
** tables within the RBU database are always processed in order sorted by
-** name. By judicious selection of the the <integer> portion of the names
+** name. By judicious selection of the <integer> portion of the names
** of the RBU tables the user can therefore control the order in which they
** are processed. This can be useful, for example, to ensure that "external
** content" FTS4 tables are updated before their underlying content tables.
** not work out of the box with zipvfs. Refer to the comment describing
** the zipvfs_create_vfs() API below for details on using RBU with zipvfs.
*/
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_open(
+SQLITE_API sqlite3rbu *sqlite3rbu_open(
const char *zTarget,
const char *zRbu,
const char *zState
);
+/*
+** Open an RBU handle to perform an RBU vacuum on database file zTarget.
+** An RBU vacuum is similar to SQLite's built-in VACUUM command, except
+** that it can be suspended and resumed like an RBU update.
+**
+** The second argument to this function identifies a database in which
+** to store the state of the RBU vacuum operation if it is suspended. The
+** first time sqlite3rbu_vacuum() is called, to start an RBU vacuum
+** operation, the state database should either not exist or be empty
+** (contain no tables). If an RBU vacuum is suspended by calling
+** sqlite3rbu_close() on the RBU handle before sqlite3rbu_step() has
+** returned SQLITE_DONE, the vacuum state is stored in the state database.
+** The vacuum can be resumed by calling this function to open a new RBU
+** handle specifying the same target and state databases.
+**
+** If the second argument passed to this function is NULL, then the
+** name of the state database is "<database>-vacuum", where <database>
+** is the name of the target database file. In this case, on UNIX, if the
+** state database is not already present in the file-system, it is created
+** with the same permissions as the target db is made.
+**
+** This function does not delete the state database after an RBU vacuum
+** is completed, even if it created it. However, if the call to
+** sqlite3rbu_close() returns any value other than SQLITE_OK, the contents
+** of the state tables within the state database are zeroed. This way,
+** the next call to sqlite3rbu_vacuum() opens a handle that starts a
+** new RBU vacuum operation.
+**
+** As with sqlite3rbu_open(), Zipvfs users should rever to the comment
+** describing the sqlite3rbu_create_vfs() API function below for
+** a description of the complications associated with using RBU with
+** zipvfs databases.
+*/
+SQLITE_API sqlite3rbu *sqlite3rbu_vacuum(
+ const char *zTarget,
+ const char *zState
+);
+
+/*
+** Configure a limit for the amount of temp space that may be used by
+** the RBU handle passed as the first argument. The new limit is specified
+** in bytes by the second parameter. If it is positive, the limit is updated.
+** If the second parameter to this function is passed zero, then the limit
+** is removed entirely. If the second parameter is negative, the limit is
+** not modified (this is useful for querying the current limit).
+**
+** In all cases the returned value is the current limit in bytes (zero
+** indicates unlimited).
+**
+** If the temp space limit is exceeded during operation, an SQLITE_FULL
+** error is returned.
+*/
+SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu*, sqlite3_int64);
+
+/*
+** Return the current amount of temp file space, in bytes, currently used by
+** the RBU handle passed as the only argument.
+*/
+SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu*);
+
/*
** Internally, each RBU connection uses a separate SQLite database
** connection to access the target and rbu update databases. This
** If an error has occurred, either while opening or stepping the RBU object,
** this function may return NULL. The error code and message may be collected
** when sqlite3rbu_close() is called.
+**
+** Database handles returned by this function remain valid until the next
+** call to any sqlite3rbu_xxx() function other than sqlite3rbu_db().
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3rbu_db(sqlite3rbu*, int bRbu);
+SQLITE_API sqlite3 *sqlite3rbu_db(sqlite3rbu*, int bRbu);
/*
** Do some work towards applying the RBU update to the target db.
** SQLITE_OK, all subsequent calls on the same RBU handle are no-ops
** that immediately return the same value.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_step(sqlite3rbu *pRbu);
+SQLITE_API int sqlite3rbu_step(sqlite3rbu *pRbu);
/*
** Force RBU to save its state to disk.
**
** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_savestate(sqlite3rbu *pRbu);
+SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *pRbu);
/*
** Close an RBU handle.
**
** If an error has already occurred as part of an sqlite3rbu_step()
** or sqlite3rbu_open() call, or if one occurs within this function, an
-** SQLite error code is returned. Additionally, *pzErrmsg may be set to
-** point to a buffer containing a utf-8 formatted English language error
-** message. It is the responsibility of the caller to eventually free any
-** such buffer using sqlite3_free().
+** SQLite error code is returned. Additionally, if pzErrmsg is not NULL,
+** *pzErrmsg may be set to point to a buffer containing a utf-8 formatted
+** English language error message. It is the responsibility of the caller to
+** eventually free any such buffer using sqlite3_free().
**
** Otherwise, if no error occurs, this function returns SQLITE_OK if the
** update has been partially applied, or SQLITE_DONE if it has been
** completely applied.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_close(sqlite3rbu *pRbu, char **pzErrmsg);
+SQLITE_API int sqlite3rbu_close(sqlite3rbu *pRbu, char **pzErrmsg);
/*
** Return the total number of key-value operations (inserts, deletes or
** updates) that have been performed on the target database since the
** current RBU update was started.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3rbu_progress(sqlite3rbu *pRbu);
+SQLITE_API sqlite3_int64 sqlite3rbu_progress(sqlite3rbu *pRbu);
+
+/*
+** Obtain permyriadage (permyriadage is to 10000 as percentage is to 100)
+** progress indications for the two stages of an RBU update. This API may
+** be useful for driving GUI progress indicators and similar.
+**
+** An RBU update is divided into two stages:
+**
+** * Stage 1, in which changes are accumulated in an oal/wal file, and
+** * Stage 2, in which the contents of the wal file are copied into the
+** main database.
+**
+** The update is visible to non-RBU clients during stage 2. During stage 1
+** non-RBU reader clients may see the original database.
+**
+** If this API is called during stage 2 of the update, output variable
+** (*pnOne) is set to 10000 to indicate that stage 1 has finished and (*pnTwo)
+** to a value between 0 and 10000 to indicate the permyriadage progress of
+** stage 2. A value of 5000 indicates that stage 2 is half finished,
+** 9000 indicates that it is 90% finished, and so on.
+**
+** If this API is called during stage 1 of the update, output variable
+** (*pnTwo) is set to 0 to indicate that stage 2 has not yet started. The
+** value to which (*pnOne) is set depends on whether or not the RBU
+** database contains an "rbu_count" table. The rbu_count table, if it
+** exists, must contain the same columns as the following:
+**
+** CREATE TABLE rbu_count(tbl TEXT PRIMARY KEY, cnt INTEGER) WITHOUT ROWID;
+**
+** There must be one row in the table for each source (data_xxx) table within
+** the RBU database. The 'tbl' column should contain the name of the source
+** table. The 'cnt' column should contain the number of rows within the
+** source table.
+**
+** If the rbu_count table is present and populated correctly and this
+** API is called during stage 1, the *pnOne output variable is set to the
+** permyriadage progress of the same stage. If the rbu_count table does
+** not exist, then (*pnOne) is set to -1 during stage 1. If the rbu_count
+** table exists but is not correctly populated, the value of the *pnOne
+** output variable during stage 1 is undefined.
+*/
+SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int*pnTwo);
+
+/*
+** Obtain an indication as to the current stage of an RBU update or vacuum.
+** This function always returns one of the SQLITE_RBU_STATE_XXX constants
+** defined in this file. Return values should be interpreted as follows:
+**
+** SQLITE_RBU_STATE_OAL:
+** RBU is currently building a *-oal file. The next call to sqlite3rbu_step()
+** may either add further data to the *-oal file, or compute data that will
+** be added by a subsequent call.
+**
+** SQLITE_RBU_STATE_MOVE:
+** RBU has finished building the *-oal file. The next call to sqlite3rbu_step()
+** will move the *-oal file to the equivalent *-wal path. If the current
+** operation is an RBU update, then the updated version of the database
+** file will become visible to ordinary SQLite clients following the next
+** call to sqlite3rbu_step().
+**
+** SQLITE_RBU_STATE_CHECKPOINT:
+** RBU is currently performing an incremental checkpoint. The next call to
+** sqlite3rbu_step() will copy a page of data from the *-wal file into
+** the target database file.
+**
+** SQLITE_RBU_STATE_DONE:
+** The RBU operation has finished. Any subsequent calls to sqlite3rbu_step()
+** will immediately return SQLITE_DONE.
+**
+** SQLITE_RBU_STATE_ERROR:
+** An error has occurred. Any subsequent calls to sqlite3rbu_step() will
+** immediately return the SQLite error code associated with the error.
+*/
+#define SQLITE_RBU_STATE_OAL 1
+#define SQLITE_RBU_STATE_MOVE 2
+#define SQLITE_RBU_STATE_CHECKPOINT 3
+#define SQLITE_RBU_STATE_DONE 4
+#define SQLITE_RBU_STATE_ERROR 5
+
+SQLITE_API int sqlite3rbu_state(sqlite3rbu *pRbu);
/*
** Create an RBU VFS named zName that accesses the underlying file-system
** file-system via "rbu" all the time, even if it only uses RBU functionality
** occasionally.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_create_vfs(const char *zName, const char *zParent);
+SQLITE_API int sqlite3rbu_create_vfs(const char *zName, const char *zParent);
/*
** Deregister and destroy an RBU vfs created by an earlier call to
** before all database handles that use it have been closed, the results
** are undefined.
*/
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_destroy_vfs(const char *zName);
+SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName);
#if 0
} /* end of the 'extern "C"' block */
/* Maximum number of prepared UPDATE statements held by this module */
#define SQLITE_RBU_UPDATE_CACHESIZE 16
+/* Delta checksums disabled by default. Compile with -DRBU_ENABLE_DELTA_CKSUM
+** to enable checksum verification.
+*/
+#ifndef RBU_ENABLE_DELTA_CKSUM
+# define RBU_ENABLE_DELTA_CKSUM 0
+#endif
+
/*
** Swap two objects of type TYPE.
*/
** RBU_STATE_OALSZ:
** Valid if STAGE==1. The size in bytes of the *-oal file.
*/
-#define RBU_STATE_STAGE 1
-#define RBU_STATE_TBL 2
-#define RBU_STATE_IDX 3
-#define RBU_STATE_ROW 4
-#define RBU_STATE_PROGRESS 5
-#define RBU_STATE_CKPT 6
-#define RBU_STATE_COOKIE 7
-#define RBU_STATE_OALSZ 8
+#define RBU_STATE_STAGE 1
+#define RBU_STATE_TBL 2
+#define RBU_STATE_IDX 3
+#define RBU_STATE_ROW 4
+#define RBU_STATE_PROGRESS 5
+#define RBU_STATE_CKPT 6
+#define RBU_STATE_COOKIE 7
+#define RBU_STATE_OALSZ 8
+#define RBU_STATE_PHASEONESTEP 9
#define RBU_STAGE_OAL 1
#define RBU_STAGE_MOVE 2
#if !defined(SQLITE_AMALGAMATION)
typedef unsigned int u32;
+typedef unsigned short u16;
typedef unsigned char u8;
typedef sqlite3_int64 i64;
#endif
#define WAL_LOCK_CKPT 1
#define WAL_LOCK_READ0 3
+#define SQLITE_FCNTL_RBUCNT 5149216
+
/*
** A structure to store values read from the rbu_state table in memory.
*/
i64 nProgress;
u32 iCookie;
i64 iOalSz;
+ i64 nPhaseOneStep;
};
struct RbuUpdateStmt {
int iTnum; /* Root page of current object */
int iPkTnum; /* If eType==EXTERNAL, root of PK index */
int bUnique; /* Current index is unique */
+ int nIndex; /* Number of aux. indexes on table zTbl */
/* Statements created by rbuObjIterPrepareAll() */
int nCol; /* Number of columns in current object */
*/
#define RBU_INSERT 1 /* Insert on a main table b-tree */
#define RBU_DELETE 2 /* Delete a row from a main table b-tree */
-#define RBU_IDX_DELETE 3 /* Delete a row from an aux. index b-tree */
-#define RBU_IDX_INSERT 4 /* Insert on an aux. index b-tree */
-#define RBU_UPDATE 5 /* Update a row in a main table b-tree */
+#define RBU_REPLACE 3 /* Delete and then insert a row */
+#define RBU_IDX_DELETE 4 /* Delete a row from an aux. index b-tree */
+#define RBU_IDX_INSERT 5 /* Insert on an aux. index b-tree */
+#define RBU_UPDATE 6 /* Update a row in a main table b-tree */
/*
** A single step of an incremental checkpoint - frame iWalFrame of the wal
/*
** RBU handle.
+**
+** nPhaseOneStep:
+** If the RBU database contains an rbu_count table, this value is set to
+** a running estimate of the number of b-tree operations required to
+** finish populating the *-oal file. This allows the sqlite3_bp_progress()
+** API to calculate the permyriadage progress of populating the *-oal file
+** using the formula:
+**
+** permyriadage = (10000 * nProgress) / nPhaseOneStep
+**
+** nPhaseOneStep is initialized to the sum of:
+**
+** nRow * (nIndex + 1)
+**
+** for all source tables in the RBU database, where nRow is the number
+** of rows in the source table and nIndex the number of indexes on the
+** corresponding target database table.
+**
+** This estimate is accurate if the RBU update consists entirely of
+** INSERT operations. However, it is inaccurate if:
+**
+** * the RBU update contains any UPDATE operations. If the PK specified
+** for an UPDATE operation does not exist in the target table, then
+** no b-tree operations are required on index b-trees. Or if the
+** specified PK does exist, then (nIndex*2) such operations are
+** required (one delete and one insert on each index b-tree).
+**
+** * the RBU update contains any DELETE operations for which the specified
+** PK does not exist. In this case no operations are required on index
+** b-trees.
+**
+** * the RBU update contains REPLACE operations. These are similar to
+** UPDATE operations.
+**
+** nPhaseOneStep is updated to account for the conditions above during the
+** first pass of each source table. The updated nPhaseOneStep value is
+** stored in the rbu_state table if the RBU update is suspended.
*/
struct sqlite3rbu {
int eStage; /* Value of RBU_STATE_STAGE field */
RbuObjIter objiter; /* Iterator for skipping through tbl/idx */
const char *zVfsName; /* Name of automatically created rbu vfs */
rbu_file *pTargetFd; /* File handle open on target db */
+ int nPagePerSector; /* Pages per sector for pTargetFd */
i64 iOalSz;
+ i64 nPhaseOneStep;
/* The following state variables are used as part of the incremental
** checkpoint stage (eStage==RBU_STAGE_CKPT). See comments surrounding
int pgsz;
u8 *aBuf;
i64 iWalCksum;
+ i64 szTemp; /* Current size of all temp files in use */
+ i64 szTempLimit; /* Total size limit for temp files */
+
+ /* Used in RBU vacuum mode only */
+ int nRbu; /* Number of RBU VFS in the stack */
+ rbu_file *pRbuFd; /* Fd for main db of dbRbu */
};
/*
** An rbu VFS is implemented using an instance of this structure.
+**
+** Variable pRbu is only non-NULL for automatically created RBU VFS objects.
+** It is NULL for RBU VFS objects created explicitly using
+** sqlite3rbu_create_vfs(). It is used to track the total amount of temp
+** space used by the RBU handle.
*/
struct rbu_vfs {
sqlite3_vfs base; /* rbu VFS shim methods */
sqlite3_vfs *pRealVfs; /* Underlying VFS */
sqlite3_mutex *mutex; /* Mutex to protect pMain */
+ sqlite3rbu *pRbu; /* Owner RBU object */
rbu_file *pMain; /* Linked list of main db files */
};
/*
** Each file opened by an rbu VFS is represented by an instance of
** the following structure.
+**
+** If this is a temporary file (pRbu!=0 && flags&DELETE_ON_CLOSE), variable
+** "sz" is set to the current size of the database file.
*/
struct rbu_file {
sqlite3_file base; /* sqlite3_file methods */
sqlite3_file *pReal; /* Underlying file handle */
rbu_vfs *pRbuVfs; /* Pointer to the rbu_vfs object */
sqlite3rbu *pRbu; /* Pointer to rbu object (rbu target only) */
+ i64 sz; /* Size of file in bytes (temp only) */
int openFlags; /* Flags this file was opened with */
u32 iCookie; /* Cookie value for main db files */
u8 iWriteVer; /* "write-version" value for main db files */
+ u8 bNolock; /* True to fail EXCLUSIVE locks */
int nShm; /* Number of entries in apShm[] array */
char **apShm; /* Array of mmap'd *-shm regions */
rbu_file *pMainNext; /* Next MAIN_DB file */
};
+/*
+** True for an RBU vacuum handle, or false otherwise.
+*/
+#define rbuIsVacuum(p) ((p)->zTarget==0)
+
/*************************************************************************
** The following three functions, found below:
return v;
}
+#if RBU_ENABLE_DELTA_CKSUM
/*
** Compute a 32-bit checksum on the N-byte buffer. Return the result.
*/
}
return sum3;
}
+#endif
/*
** Apply a delta.
){
unsigned int limit;
unsigned int total = 0;
-#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST
+#if RBU_ENABLE_DELTA_CKSUM
char *zOrigOut = zOut;
#endif
case ';': {
zDelta++; lenDelta--;
zOut[0] = 0;
-#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST
+#if RBU_ENABLE_DELTA_CKSUM
if( cnt!=rbuDeltaChecksum(zOrigOut, total) ){
/* ERROR: bad checksum */
return -1;
/*
** The implementation of the rbu_target_name() SQL function. This function
-** accepts one argument - the name of a table in the RBU database. If the
-** table name matches the pattern:
+** accepts one or two arguments. The first argument is the name of a table -
+** the name of a table in the RBU database. The second, if it is present, is 1
+** for a view or 0 for a table.
+**
+** For a non-vacuum RBU handle, if the table name matches the pattern:
**
** data[0-9]_<name>
**
** "data_t1" -> "t1"
** "data0123_t2" -> "t2"
** "dataAB_t3" -> NULL
+**
+** For an rbu vacuum handle, a copy of the first argument is returned if
+** the second argument is either missing or 0 (not a view).
*/
static void rbuTargetNameFunc(
- sqlite3_context *context,
+ sqlite3_context *pCtx,
int argc,
sqlite3_value **argv
){
+ sqlite3rbu *p = sqlite3_user_data(pCtx);
const char *zIn;
- assert( argc==1 );
+ assert( argc==1 || argc==2 );
zIn = (const char*)sqlite3_value_text(argv[0]);
- if( zIn && strlen(zIn)>4 && memcmp("data", zIn, 4)==0 ){
- int i;
- for(i=4; zIn[i]>='0' && zIn[i]<='9'; i++);
- if( zIn[i]=='_' && zIn[i+1] ){
- sqlite3_result_text(context, &zIn[i+1], -1, SQLITE_STATIC);
+ if( zIn ){
+ if( rbuIsVacuum(p) ){
+ if( argc==1 || 0==sqlite3_value_int(argv[1]) ){
+ sqlite3_result_text(pCtx, zIn, -1, SQLITE_STATIC);
+ }
+ }else{
+ if( strlen(zIn)>4 && memcmp("data", zIn, 4)==0 ){
+ int i;
+ for(i=4; zIn[i]>='0' && zIn[i]<='9'; i++);
+ if( zIn[i]=='_' && zIn[i+1] ){
+ sqlite3_result_text(pCtx, &zIn[i+1], -1, SQLITE_STATIC);
+ }
+ }
}
}
}
int rc;
memset(pIter, 0, sizeof(RbuObjIter));
- rc = prepareAndCollectError(p->dbRbu, &pIter->pTblIter, &p->zErrmsg,
- "SELECT rbu_target_name(name) AS target, name FROM sqlite_master "
+ rc = prepareFreeAndCollectError(p->dbRbu, &pIter->pTblIter, &p->zErrmsg,
+ sqlite3_mprintf(
+ "SELECT rbu_target_name(name, type='view') AS target, name "
+ "FROM sqlite_master "
"WHERE type IN ('table', 'view') AND target IS NOT NULL "
+ " %s "
"ORDER BY name"
- );
+ , rbuIsVacuum(p) ? "AND rootpage!=0 AND rootpage IS NOT NULL" : ""));
if( rc==SQLITE_OK ){
rc = prepareAndCollectError(p->dbMain, &pIter->pIdxIter, &p->zErrmsg,
void *pRet = 0;
if( p->rc==SQLITE_OK ){
assert( nByte>0 );
- pRet = sqlite3_malloc(nByte);
+ pRet = sqlite3_malloc64(nByte);
if( pRet==0 ){
p->rc = SQLITE_NOMEM;
}else{
assert( *pRc==SQLITE_OK );
if( zStr ){
- int nCopy = strlen(zStr) + 1;
- zRet = (char*)sqlite3_malloc(nCopy);
+ size_t nCopy = strlen(zStr) + 1;
+ zRet = (char*)sqlite3_malloc64(nCopy);
if( zRet ){
memcpy(zRet, zStr, nCopy);
}else{
);
}
+ pIter->nIndex = 0;
while( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pList) ){
const char *zIdx = (const char*)sqlite3_column_text(pList, 1);
sqlite3_stmt *pXInfo = 0;
}
rbuFinalize(p, pXInfo);
bIndex = 1;
+ pIter->nIndex++;
+ }
+
+ if( pIter->eType==RBU_PK_WITHOUT_ROWID ){
+ /* "PRAGMA index_list" includes the main PK b-tree */
+ pIter->nIndex--;
}
rbuFinalize(p, pList);
pStmt = 0;
if( p->rc==SQLITE_OK
+ && rbuIsVacuum(p)==0
&& bRbuRowid!=(pIter->eType==RBU_PK_VTAB || pIter->eType==RBU_PK_NONE)
){
p->rc = SQLITE_ERROR;
rbuFinalize(p, pStmt);
rbuObjIterCacheIndexedCols(p, pIter);
assert( pIter->eType!=RBU_PK_VTAB || pIter->abIndexed==0 );
+ assert( pIter->eType!=RBU_PK_VTAB || pIter->nIndex==0 );
}
return p->rc;
for(i=0; pIter->abTblPk[i]==0; i++);
assert( i<pIter->nTblCol );
zCol = pIter->azTblCol[i];
+ }else if( rbuIsVacuum(p) ){
+ zCol = "_rowid_";
}else{
zCol = "rbu_rowid";
}
int iCid = sqlite3_column_int(pXInfo, 1);
int bDesc = sqlite3_column_int(pXInfo, 3);
const char *zCollate = (const char*)sqlite3_column_text(pXInfo, 4);
- zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %s", zCols, zComma,
+ zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %Q", zCols, zComma,
iCid, pIter->azTblType[iCid], zCollate
);
zPk = rbuMPrintf(p, "%z%sc%d%s", zPk, zComma, iCid, bDesc?" DESC":"");
** "PRIMARY KEY" to the imposter table column declaration. */
zPk = "PRIMARY KEY ";
}
- zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %s%s",
+ zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %Q%s",
zSql, zComma, zCol, pIter->azTblType[iCol], zPk, zColl,
(pIter->abNotNull[iCol] ? " NOT NULL" : "")
);
int rc = SQLITE_OK;
int i;
+ assert( sqlite3_value_int(apVal[0])!=0
+ || p->objiter.eType==RBU_PK_EXTERNAL
+ || p->objiter.eType==RBU_PK_NONE
+ );
+ if( sqlite3_value_int(apVal[0])!=0 ){
+ p->nPhaseOneStep += p->objiter.nIndex;
+ }
+
for(i=0; rc==SQLITE_OK && i<nVal; i++){
rc = sqlite3_bind_value(p->objiter.pTmpInsert, i+1, apVal[i]);
}
}
/* And to delete index entries */
- if( p->rc==SQLITE_OK ){
+ if( rbuIsVacuum(p)==0 && p->rc==SQLITE_OK ){
p->rc = prepareFreeAndCollectError(
p->dbMain, &pIter->pDelete, &p->zErrmsg,
sqlite3_mprintf("DELETE FROM \"rbu_imp_%w\" WHERE %s", zTbl, zWhere)
/* Create the SELECT statement to read keys in sorted order */
if( p->rc==SQLITE_OK ){
char *zSql;
+ if( rbuIsVacuum(p) ){
+ zSql = sqlite3_mprintf(
+ "SELECT %s, 0 AS rbu_control FROM '%q' ORDER BY %s%s",
+ zCollist,
+ pIter->zDataTbl,
+ zCollist, zLimit
+ );
+ }else
+
if( pIter->eType==RBU_PK_EXTERNAL || pIter->eType==RBU_PK_NONE ){
zSql = sqlite3_mprintf(
"SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' ORDER BY %s%s",
);
}else{
zSql = sqlite3_mprintf(
+ "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' "
+ "UNION ALL "
"SELECT %s, rbu_control FROM '%q' "
"WHERE typeof(rbu_control)='integer' AND rbu_control!=1 "
- "UNION ALL "
- "SELECT %s, rbu_control FROM %s.'rbu_tmp_%q' "
"ORDER BY %s%s",
- zCollist, pIter->zDataTbl,
zCollist, p->zStateDb, pIter->zDataTbl,
+ zCollist, pIter->zDataTbl,
zCollist, zLimit
);
}
sqlite3_free(zWhere);
sqlite3_free(zBind);
}else{
- int bRbuRowid = (pIter->eType==RBU_PK_VTAB || pIter->eType==RBU_PK_NONE);
+ int bRbuRowid = (pIter->eType==RBU_PK_VTAB)
+ ||(pIter->eType==RBU_PK_NONE)
+ ||(pIter->eType==RBU_PK_EXTERNAL && rbuIsVacuum(p));
const char *zTbl = pIter->zTbl; /* Table this step applies to */
const char *zWrite; /* Imposter table name */
);
}
- /* Create the DELETE statement to write to the target PK b-tree */
- if( p->rc==SQLITE_OK ){
+ /* Create the DELETE statement to write to the target PK b-tree.
+ ** Because it only performs INSERT operations, this is not required for
+ ** an rbu vacuum handle. */
+ if( rbuIsVacuum(p)==0 && p->rc==SQLITE_OK ){
p->rc = prepareFreeAndCollectError(p->dbMain, &pIter->pDelete, pz,
sqlite3_mprintf(
"DELETE FROM \"%s%w\" WHERE %s", zWrite, zTbl, zWhere
);
}
- if( pIter->abIndexed ){
+ if( rbuIsVacuum(p)==0 && pIter->abIndexed ){
const char *zRbuRowid = "";
if( pIter->eType==RBU_PK_EXTERNAL || pIter->eType==RBU_PK_NONE ){
zRbuRowid = ", rbu_rowid";
rbuMPrintfExec(p, p->dbMain,
"CREATE TEMP TRIGGER rbu_delete_tr BEFORE DELETE ON \"%s%w\" "
"BEGIN "
- " SELECT rbu_tmp_insert(2, %s);"
+ " SELECT rbu_tmp_insert(3, %s);"
"END;"
"CREATE TEMP TRIGGER rbu_update1_tr BEFORE UPDATE ON \"%s%w\" "
"BEGIN "
- " SELECT rbu_tmp_insert(2, %s);"
+ " SELECT rbu_tmp_insert(3, %s);"
"END;"
"CREATE TEMP TRIGGER rbu_update2_tr AFTER UPDATE ON \"%s%w\" "
"BEGIN "
- " SELECT rbu_tmp_insert(3, %s);"
+ " SELECT rbu_tmp_insert(4, %s);"
"END;",
zWrite, zTbl, zOldlist,
zWrite, zTbl, zOldlist,
/* Create the SELECT statement to read keys from data_xxx */
if( p->rc==SQLITE_OK ){
+ const char *zRbuRowid = "";
+ if( bRbuRowid ){
+ zRbuRowid = rbuIsVacuum(p) ? ",_rowid_ " : ",rbu_rowid";
+ }
p->rc = prepareFreeAndCollectError(p->dbRbu, &pIter->pSelect, pz,
sqlite3_mprintf(
- "SELECT %s, rbu_control%s FROM '%q'%s",
- zCollist, (bRbuRowid ? ", rbu_rowid" : ""),
+ "SELECT %s,%s rbu_control%s FROM '%q'%s",
+ zCollist,
+ (rbuIsVacuum(p) ? "0 AS " : ""),
+ zRbuRowid,
pIter->zDataTbl, zLimit
)
);
return p->rc;
}
-static sqlite3 *rbuOpenDbhandle(sqlite3rbu *p, const char *zName){
+static sqlite3 *rbuOpenDbhandle(
+ sqlite3rbu *p,
+ const char *zName,
+ int bUseVfs
+){
sqlite3 *db = 0;
if( p->rc==SQLITE_OK ){
const int flags = SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE|SQLITE_OPEN_URI;
- p->rc = sqlite3_open_v2(zName, &db, flags, p->zVfsName);
+ p->rc = sqlite3_open_v2(zName, &db, flags, bUseVfs ? p->zVfsName : 0);
if( p->rc ){
p->zErrmsg = sqlite3_mprintf("%s", sqlite3_errmsg(db));
sqlite3_close(db);
return db;
}
+/*
+** Free an RbuState object allocated by rbuLoadState().
+*/
+static void rbuFreeState(RbuState *p){
+ if( p ){
+ sqlite3_free(p->zTbl);
+ sqlite3_free(p->zIdx);
+ sqlite3_free(p);
+ }
+}
+
+/*
+** Allocate an RbuState object and load the contents of the rbu_state
+** table into it. Return a pointer to the new object. It is the
+** responsibility of the caller to eventually free the object using
+** sqlite3_free().
+**
+** If an error occurs, leave an error code and message in the rbu handle
+** and return NULL.
+*/
+static RbuState *rbuLoadState(sqlite3rbu *p){
+ RbuState *pRet = 0;
+ sqlite3_stmt *pStmt = 0;
+ int rc;
+ int rc2;
+
+ pRet = (RbuState*)rbuMalloc(p, sizeof(RbuState));
+ if( pRet==0 ) return 0;
+
+ rc = prepareFreeAndCollectError(p->dbRbu, &pStmt, &p->zErrmsg,
+ sqlite3_mprintf("SELECT k, v FROM %s.rbu_state", p->zStateDb)
+ );
+ while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){
+ switch( sqlite3_column_int(pStmt, 0) ){
+ case RBU_STATE_STAGE:
+ pRet->eStage = sqlite3_column_int(pStmt, 1);
+ if( pRet->eStage!=RBU_STAGE_OAL
+ && pRet->eStage!=RBU_STAGE_MOVE
+ && pRet->eStage!=RBU_STAGE_CKPT
+ ){
+ p->rc = SQLITE_CORRUPT;
+ }
+ break;
+
+ case RBU_STATE_TBL:
+ pRet->zTbl = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc);
+ break;
+
+ case RBU_STATE_IDX:
+ pRet->zIdx = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc);
+ break;
+
+ case RBU_STATE_ROW:
+ pRet->nRow = sqlite3_column_int(pStmt, 1);
+ break;
+
+ case RBU_STATE_PROGRESS:
+ pRet->nProgress = sqlite3_column_int64(pStmt, 1);
+ break;
+
+ case RBU_STATE_CKPT:
+ pRet->iWalCksum = sqlite3_column_int64(pStmt, 1);
+ break;
+
+ case RBU_STATE_COOKIE:
+ pRet->iCookie = (u32)sqlite3_column_int64(pStmt, 1);
+ break;
+
+ case RBU_STATE_OALSZ:
+ pRet->iOalSz = (u32)sqlite3_column_int64(pStmt, 1);
+ break;
+
+ case RBU_STATE_PHASEONESTEP:
+ pRet->nPhaseOneStep = sqlite3_column_int64(pStmt, 1);
+ break;
+
+ default:
+ rc = SQLITE_CORRUPT;
+ break;
+ }
+ }
+ rc2 = sqlite3_finalize(pStmt);
+ if( rc==SQLITE_OK ) rc = rc2;
+
+ p->rc = rc;
+ return pRet;
+}
+
+
/*
** Open the database handle and attach the RBU database as "rbu". If an
** error occurs, leave an error code and message in the RBU handle.
*/
-static void rbuOpenDatabase(sqlite3rbu *p){
- assert( p->rc==SQLITE_OK );
- assert( p->dbMain==0 && p->dbRbu==0 );
+static void rbuOpenDatabase(sqlite3rbu *p, int *pbRetry){
+ assert( p->rc || (p->dbMain==0 && p->dbRbu==0) );
+ assert( p->rc || rbuIsVacuum(p) || p->zTarget!=0 );
- p->eStage = 0;
- p->dbMain = rbuOpenDbhandle(p, p->zTarget);
- p->dbRbu = rbuOpenDbhandle(p, p->zRbu);
+ /* Open the RBU database */
+ p->dbRbu = rbuOpenDbhandle(p, p->zRbu, 1);
+
+ if( p->rc==SQLITE_OK && rbuIsVacuum(p) ){
+ sqlite3_file_control(p->dbRbu, "main", SQLITE_FCNTL_RBUCNT, (void*)p);
+ if( p->zState==0 ){
+ const char *zFile = sqlite3_db_filename(p->dbRbu, "main");
+ p->zState = rbuMPrintf(p, "file://%s-vacuum?modeof=%s", zFile, zFile);
+ }
+ }
/* If using separate RBU and state databases, attach the state database to
** the RBU db handle now. */
memcpy(p->zStateDb, "main", 4);
}
+#if 0
+ if( p->rc==SQLITE_OK && rbuIsVacuum(p) ){
+ p->rc = sqlite3_exec(p->dbRbu, "BEGIN", 0, 0, 0);
+ }
+#endif
+
+ /* If it has not already been created, create the rbu_state table */
+ rbuMPrintfExec(p, p->dbRbu, RBU_CREATE_STATE, p->zStateDb);
+
+#if 0
+ if( rbuIsVacuum(p) ){
+ if( p->rc==SQLITE_OK ){
+ int rc2;
+ int bOk = 0;
+ sqlite3_stmt *pCnt = 0;
+ p->rc = prepareAndCollectError(p->dbRbu, &pCnt, &p->zErrmsg,
+ "SELECT count(*) FROM stat.sqlite_master"
+ );
+ if( p->rc==SQLITE_OK
+ && sqlite3_step(pCnt)==SQLITE_ROW
+ && 1==sqlite3_column_int(pCnt, 0)
+ ){
+ bOk = 1;
+ }
+ rc2 = sqlite3_finalize(pCnt);
+ if( p->rc==SQLITE_OK ) p->rc = rc2;
+
+ if( p->rc==SQLITE_OK && bOk==0 ){
+ p->rc = SQLITE_ERROR;
+ p->zErrmsg = sqlite3_mprintf("invalid state database");
+ }
+
+ if( p->rc==SQLITE_OK ){
+ p->rc = sqlite3_exec(p->dbRbu, "COMMIT", 0, 0, 0);
+ }
+ }
+ }
+#endif
+
+ if( p->rc==SQLITE_OK && rbuIsVacuum(p) ){
+ int bOpen = 0;
+ int rc;
+ p->nRbu = 0;
+ p->pRbuFd = 0;
+ rc = sqlite3_file_control(p->dbRbu, "main", SQLITE_FCNTL_RBUCNT, (void*)p);
+ if( rc!=SQLITE_NOTFOUND ) p->rc = rc;
+ if( p->eStage>=RBU_STAGE_MOVE ){
+ bOpen = 1;
+ }else{
+ RbuState *pState = rbuLoadState(p);
+ if( pState ){
+ bOpen = (pState->eStage>=RBU_STAGE_MOVE);
+ rbuFreeState(pState);
+ }
+ }
+ if( bOpen ) p->dbMain = rbuOpenDbhandle(p, p->zRbu, p->nRbu<=1);
+ }
+
+ p->eStage = 0;
+ if( p->rc==SQLITE_OK && p->dbMain==0 ){
+ if( !rbuIsVacuum(p) ){
+ p->dbMain = rbuOpenDbhandle(p, p->zTarget, 1);
+ }else if( p->pRbuFd->pWalFd ){
+ if( pbRetry ){
+ p->pRbuFd->bNolock = 0;
+ sqlite3_close(p->dbRbu);
+ sqlite3_close(p->dbMain);
+ p->dbMain = 0;
+ p->dbRbu = 0;
+ *pbRetry = 1;
+ return;
+ }
+ p->rc = SQLITE_ERROR;
+ p->zErrmsg = sqlite3_mprintf("cannot vacuum wal mode database");
+ }else{
+ char *zTarget;
+ char *zExtra = 0;
+ if( strlen(p->zRbu)>=5 && 0==memcmp("file:", p->zRbu, 5) ){
+ zExtra = &p->zRbu[5];
+ while( *zExtra ){
+ if( *zExtra++=='?' ) break;
+ }
+ if( *zExtra=='\0' ) zExtra = 0;
+ }
+
+ zTarget = sqlite3_mprintf("file:%s-vacuum?rbu_memory=1%s%s",
+ sqlite3_db_filename(p->dbRbu, "main"),
+ (zExtra==0 ? "" : "&"), (zExtra==0 ? "" : zExtra)
+ );
+
+ if( zTarget==0 ){
+ p->rc = SQLITE_NOMEM;
+ return;
+ }
+ p->dbMain = rbuOpenDbhandle(p, zTarget, p->nRbu<=1);
+ sqlite3_free(zTarget);
+ }
+ }
+
if( p->rc==SQLITE_OK ){
p->rc = sqlite3_create_function(p->dbMain,
"rbu_tmp_insert", -1, SQLITE_UTF8, (void*)p, rbuTmpInsertFunc, 0, 0
if( p->rc==SQLITE_OK ){
p->rc = sqlite3_create_function(p->dbRbu,
- "rbu_target_name", 1, SQLITE_UTF8, (void*)p, rbuTargetNameFunc, 0, 0
+ "rbu_target_name", -1, SQLITE_UTF8, (void*)p, rbuTargetNameFunc, 0, 0
);
}
#endif
{
int i, sz;
- sz = sqlite3Strlen30(z);
+ sz = (int)strlen(z)&0xffffff;
for(i=sz-1; i>0 && z[i]!='/' && z[i]!='.'; i--){}
- if( z[i]=='.' && ALWAYS(sz>i+4) ) memmove(&z[i+1], &z[sz-3], 4);
+ if( z[i]=='.' && sz>i+4 ) memmove(&z[i+1], &z[sz-3], 4);
}
#endif
}
if( rc2!=SQLITE_INTERNAL ) p->rc = rc2;
}
- if( p->rc==SQLITE_OK ){
+ if( p->rc==SQLITE_OK && p->nFrame>0 ){
p->eStage = RBU_STAGE_CKPT;
p->nStep = (pState ? pState->nRow : 0);
p->aBuf = rbuMalloc(p, p->pgsz);
p->iWalCksum = rbuShmChecksum(p);
}
- if( p->rc==SQLITE_OK && pState && pState->iWalCksum!=p->iWalCksum ){
- p->rc = SQLITE_DONE;
- p->eStage = RBU_STAGE_DONE;
+ if( p->rc==SQLITE_OK ){
+ if( p->nFrame==0 || (pState && pState->iWalCksum!=p->iWalCksum) ){
+ p->rc = SQLITE_DONE;
+ p->eStage = RBU_STAGE_DONE;
+ }else{
+ int nSectorSize;
+ sqlite3_file *pDb = p->pTargetFd->pReal;
+ sqlite3_file *pWal = p->pTargetFd->pWalFd->pReal;
+ assert( p->nPagePerSector==0 );
+ nSectorSize = pDb->pMethods->xSectorSize(pDb);
+ if( nSectorSize>p->pgsz ){
+ p->nPagePerSector = nSectorSize / p->pgsz;
+ }else{
+ p->nPagePerSector = 1;
+ }
+
+ /* Call xSync() on the wal file. This causes SQLite to sync the
+ ** directory in which the target database and the wal file reside, in
+ ** case it has not been synced since the rename() call in
+ ** rbuMoveOalFile(). */
+ p->rc = pWal->pMethods->xSync(pWal, SQLITE_SYNC_NORMAL);
+ }
}
}
if( pRbu->nFrame==pRbu->nFrameAlloc ){
int nNew = (pRbu->nFrameAlloc ? pRbu->nFrameAlloc : 64) * 2;
RbuFrame *aNew;
- aNew = (RbuFrame*)sqlite3_realloc(pRbu->aFrame, nNew * sizeof(RbuFrame));
+ aNew = (RbuFrame*)sqlite3_realloc64(pRbu->aFrame, nNew * sizeof(RbuFrame));
if( aNew==0 ) return SQLITE_NOMEM;
pRbu->aFrame = aNew;
pRbu->nFrameAlloc = nNew;
if( nChar==0 ){
return 0;
}
- zWideFilename = sqlite3_malloc( nChar*sizeof(zWideFilename[0]) );
+ zWideFilename = sqlite3_malloc64( nChar*sizeof(zWideFilename[0]) );
if( zWideFilename==0 ){
return 0;
}
*/
static void rbuMoveOalFile(sqlite3rbu *p){
const char *zBase = sqlite3_db_filename(p->dbMain, "main");
+ const char *zMove = zBase;
+ char *zOal;
+ char *zWal;
- char *zWal = sqlite3_mprintf("%s-wal", zBase);
- char *zOal = sqlite3_mprintf("%s-oal", zBase);
+ if( rbuIsVacuum(p) ){
+ zMove = sqlite3_db_filename(p->dbRbu, "main");
+ }
+ zOal = sqlite3_mprintf("%s-oal", zMove);
+ zWal = sqlite3_mprintf("%s-wal", zMove);
assert( p->eStage==RBU_STAGE_MOVE );
assert( p->rc==SQLITE_OK && p->zErrmsg==0 );
/* Re-open the databases. */
rbuObjIterFinalize(&p->objiter);
- sqlite3_close(p->dbMain);
sqlite3_close(p->dbRbu);
+ sqlite3_close(p->dbMain);
p->dbMain = 0;
p->dbRbu = 0;
#endif
if( p->rc==SQLITE_OK ){
- rbuOpenDatabase(p);
+ rbuOpenDatabase(p, 0);
rbuSetupCheckpoint(p, 0);
}
}
switch( sqlite3_column_type(p->objiter.pSelect, iCol) ){
case SQLITE_INTEGER: {
int iVal = sqlite3_column_int(p->objiter.pSelect, iCol);
- if( iVal==0 ){
- res = RBU_INSERT;
- }else if( iVal==1 ){
- res = RBU_DELETE;
- }else if( iVal==2 ){
- res = RBU_IDX_DELETE;
- }else if( iVal==3 ){
- res = RBU_IDX_INSERT;
+ switch( iVal ){
+ case 0: res = RBU_INSERT; break;
+ case 1: res = RBU_DELETE; break;
+ case 2: res = RBU_REPLACE; break;
+ case 3: res = RBU_IDX_DELETE; break;
+ case 4: res = RBU_IDX_INSERT; break;
}
break;
}
# define assertColumnName(x,y,z)
#endif
+/*
+** Argument eType must be one of RBU_INSERT, RBU_DELETE, RBU_IDX_INSERT or
+** RBU_IDX_DELETE. This function performs the work of a single
+** sqlite3rbu_step() call for the type of operation specified by eType.
+*/
+static void rbuStepOneOp(sqlite3rbu *p, int eType){
+ RbuObjIter *pIter = &p->objiter;
+ sqlite3_value *pVal;
+ sqlite3_stmt *pWriter;
+ int i;
+
+ assert( p->rc==SQLITE_OK );
+ assert( eType!=RBU_DELETE || pIter->zIdx==0 );
+ assert( eType==RBU_DELETE || eType==RBU_IDX_DELETE
+ || eType==RBU_INSERT || eType==RBU_IDX_INSERT
+ );
+
+ /* If this is a delete, decrement nPhaseOneStep by nIndex. If the DELETE
+ ** statement below does actually delete a row, nPhaseOneStep will be
+ ** incremented by the same amount when SQL function rbu_tmp_insert()
+ ** is invoked by the trigger. */
+ if( eType==RBU_DELETE ){
+ p->nPhaseOneStep -= p->objiter.nIndex;
+ }
+
+ if( eType==RBU_IDX_DELETE || eType==RBU_DELETE ){
+ pWriter = pIter->pDelete;
+ }else{
+ pWriter = pIter->pInsert;
+ }
+
+ for(i=0; i<pIter->nCol; i++){
+ /* If this is an INSERT into a table b-tree and the table has an
+ ** explicit INTEGER PRIMARY KEY, check that this is not an attempt
+ ** to write a NULL into the IPK column. That is not permitted. */
+ if( eType==RBU_INSERT
+ && pIter->zIdx==0 && pIter->eType==RBU_PK_IPK && pIter->abTblPk[i]
+ && sqlite3_column_type(pIter->pSelect, i)==SQLITE_NULL
+ ){
+ p->rc = SQLITE_MISMATCH;
+ p->zErrmsg = sqlite3_mprintf("datatype mismatch");
+ return;
+ }
+
+ if( eType==RBU_DELETE && pIter->abTblPk[i]==0 ){
+ continue;
+ }
+
+ pVal = sqlite3_column_value(pIter->pSelect, i);
+ p->rc = sqlite3_bind_value(pWriter, i+1, pVal);
+ if( p->rc ) return;
+ }
+ if( pIter->zIdx==0 ){
+ if( pIter->eType==RBU_PK_VTAB
+ || pIter->eType==RBU_PK_NONE
+ || (pIter->eType==RBU_PK_EXTERNAL && rbuIsVacuum(p))
+ ){
+ /* For a virtual table, or a table with no primary key, the
+ ** SELECT statement is:
+ **
+ ** SELECT <cols>, rbu_control, rbu_rowid FROM ....
+ **
+ ** Hence column_value(pIter->nCol+1).
+ */
+ assertColumnName(pIter->pSelect, pIter->nCol+1,
+ rbuIsVacuum(p) ? "rowid" : "rbu_rowid"
+ );
+ pVal = sqlite3_column_value(pIter->pSelect, pIter->nCol+1);
+ p->rc = sqlite3_bind_value(pWriter, pIter->nCol+1, pVal);
+ }
+ }
+ if( p->rc==SQLITE_OK ){
+ sqlite3_step(pWriter);
+ p->rc = resetAndCollectError(pWriter, &p->zErrmsg);
+ }
+}
+
/*
** This function does the work for an sqlite3rbu_step() call.
**
static int rbuStep(sqlite3rbu *p){
RbuObjIter *pIter = &p->objiter;
const char *zMask = 0;
- int i;
int eType = rbuStepType(p, &zMask);
if( eType ){
+ assert( eType==RBU_INSERT || eType==RBU_DELETE
+ || eType==RBU_REPLACE || eType==RBU_IDX_DELETE
+ || eType==RBU_IDX_INSERT || eType==RBU_UPDATE
+ );
assert( eType!=RBU_UPDATE || pIter->zIdx==0 );
- if( pIter->zIdx==0 && eType==RBU_IDX_DELETE ){
+ if( pIter->zIdx==0 && (eType==RBU_IDX_DELETE || eType==RBU_IDX_INSERT) ){
rbuBadControlError(p);
}
- else if(
- eType==RBU_INSERT
- || eType==RBU_DELETE
- || eType==RBU_IDX_DELETE
- || eType==RBU_IDX_INSERT
- ){
- sqlite3_value *pVal;
- sqlite3_stmt *pWriter;
-
- assert( eType!=RBU_UPDATE );
- assert( eType!=RBU_DELETE || pIter->zIdx==0 );
-
- if( eType==RBU_IDX_DELETE || eType==RBU_DELETE ){
- pWriter = pIter->pDelete;
- }else{
- pWriter = pIter->pInsert;
+ else if( eType==RBU_REPLACE ){
+ if( pIter->zIdx==0 ){
+ p->nPhaseOneStep += p->objiter.nIndex;
+ rbuStepOneOp(p, RBU_DELETE);
}
-
- for(i=0; i<pIter->nCol; i++){
- /* If this is an INSERT into a table b-tree and the table has an
- ** explicit INTEGER PRIMARY KEY, check that this is not an attempt
- ** to write a NULL into the IPK column. That is not permitted. */
- if( eType==RBU_INSERT
- && pIter->zIdx==0 && pIter->eType==RBU_PK_IPK && pIter->abTblPk[i]
- && sqlite3_column_type(pIter->pSelect, i)==SQLITE_NULL
- ){
- p->rc = SQLITE_MISMATCH;
- p->zErrmsg = sqlite3_mprintf("datatype mismatch");
- goto step_out;
- }
-
- if( eType==RBU_DELETE && pIter->abTblPk[i]==0 ){
- continue;
- }
-
- pVal = sqlite3_column_value(pIter->pSelect, i);
- p->rc = sqlite3_bind_value(pWriter, i+1, pVal);
- if( p->rc ) goto step_out;
- }
- if( pIter->zIdx==0
- && (pIter->eType==RBU_PK_VTAB || pIter->eType==RBU_PK_NONE)
- ){
- /* For a virtual table, or a table with no primary key, the
- ** SELECT statement is:
- **
- ** SELECT <cols>, rbu_control, rbu_rowid FROM ....
- **
- ** Hence column_value(pIter->nCol+1).
- */
- assertColumnName(pIter->pSelect, pIter->nCol+1, "rbu_rowid");
- pVal = sqlite3_column_value(pIter->pSelect, pIter->nCol+1);
- p->rc = sqlite3_bind_value(pWriter, pIter->nCol+1, pVal);
- }
- if( p->rc==SQLITE_OK ){
- sqlite3_step(pWriter);
- p->rc = resetAndCollectError(pWriter, &p->zErrmsg);
- }
- }else{
+ if( p->rc==SQLITE_OK ) rbuStepOneOp(p, RBU_INSERT);
+ }
+ else if( eType!=RBU_UPDATE ){
+ rbuStepOneOp(p, eType);
+ }
+ else{
sqlite3_value *pVal;
sqlite3_stmt *pUpdate = 0;
assert( eType==RBU_UPDATE );
+ p->nPhaseOneStep -= p->objiter.nIndex;
rbuGetUpdateStmt(p, pIter, zMask, &pUpdate);
if( pUpdate ){
+ int i;
for(i=0; p->rc==SQLITE_OK && i<pIter->nCol; i++){
char c = zMask[pIter->aiSrcOrder[i]];
pVal = sqlite3_column_value(pIter->pSelect, i);
}
}
}
-
- step_out:
return p->rc;
}
/*
** Increment the schema cookie of the main database opened by p->dbMain.
+**
+** Or, if this is an RBU vacuum, set the schema cookie of the main db
+** opened by p->dbMain to one more than the schema cookie of the main
+** db opened by p->dbRbu.
*/
static void rbuIncrSchemaCookie(sqlite3rbu *p){
if( p->rc==SQLITE_OK ){
+ sqlite3 *dbread = (rbuIsVacuum(p) ? p->dbRbu : p->dbMain);
int iCookie = 1000000;
sqlite3_stmt *pStmt;
- p->rc = prepareAndCollectError(p->dbMain, &pStmt, &p->zErrmsg,
+ p->rc = prepareAndCollectError(dbread, &pStmt, &p->zErrmsg,
"PRAGMA schema_version"
);
if( p->rc==SQLITE_OK ){
static void rbuSaveState(sqlite3rbu *p, int eStage){
if( p->rc==SQLITE_OK || p->rc==SQLITE_DONE ){
sqlite3_stmt *pInsert = 0;
+ rbu_file *pFd = (rbuIsVacuum(p) ? p->pRbuFd : p->pTargetFd);
int rc;
assert( p->zErrmsg==0 );
"(%d, %d), "
"(%d, %lld), "
"(%d, %lld), "
+ "(%d, %lld), "
"(%d, %lld) ",
p->zStateDb,
RBU_STATE_STAGE, eStage,
RBU_STATE_ROW, p->nStep,
RBU_STATE_PROGRESS, p->nProgress,
RBU_STATE_CKPT, p->iWalCksum,
- RBU_STATE_COOKIE, (i64)p->pTargetFd->iCookie,
- RBU_STATE_OALSZ, p->iOalSz
+ RBU_STATE_COOKIE, (i64)pFd->iCookie,
+ RBU_STATE_OALSZ, p->iOalSz,
+ RBU_STATE_PHASEONESTEP, p->nPhaseOneStep
)
);
assert( pInsert==0 || rc==SQLITE_OK );
}
+/*
+** The second argument passed to this function is the name of a PRAGMA
+** setting - "page_size", "auto_vacuum", "user_version" or "application_id".
+** This function executes the following on sqlite3rbu.dbRbu:
+**
+** "PRAGMA main.$zPragma"
+**
+** where $zPragma is the string passed as the second argument, then
+** on sqlite3rbu.dbMain:
+**
+** "PRAGMA main.$zPragma = $val"
+**
+** where $val is the value returned by the first PRAGMA invocation.
+**
+** In short, it copies the value of the specified PRAGMA setting from
+** dbRbu to dbMain.
+*/
+static void rbuCopyPragma(sqlite3rbu *p, const char *zPragma){
+ if( p->rc==SQLITE_OK ){
+ sqlite3_stmt *pPragma = 0;
+ p->rc = prepareFreeAndCollectError(p->dbRbu, &pPragma, &p->zErrmsg,
+ sqlite3_mprintf("PRAGMA main.%s", zPragma)
+ );
+ if( p->rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pPragma) ){
+ p->rc = rbuMPrintfExec(p, p->dbMain, "PRAGMA main.%s = %d",
+ zPragma, sqlite3_column_int(pPragma, 0)
+ );
+ }
+ rbuFinalize(p, pPragma);
+ }
+}
+
+/*
+** The RBU handle passed as the only argument has just been opened and
+** the state database is empty. If this RBU handle was opened for an
+** RBU vacuum operation, create the schema in the target db.
+*/
+static void rbuCreateTargetSchema(sqlite3rbu *p){
+ sqlite3_stmt *pSql = 0;
+ sqlite3_stmt *pInsert = 0;
+
+ assert( rbuIsVacuum(p) );
+ p->rc = sqlite3_exec(p->dbMain, "PRAGMA writable_schema=1", 0,0, &p->zErrmsg);
+ if( p->rc==SQLITE_OK ){
+ p->rc = prepareAndCollectError(p->dbRbu, &pSql, &p->zErrmsg,
+ "SELECT sql FROM sqlite_master WHERE sql!='' AND rootpage!=0"
+ " AND name!='sqlite_sequence' "
+ " ORDER BY type DESC"
+ );
+ }
+
+ while( p->rc==SQLITE_OK && sqlite3_step(pSql)==SQLITE_ROW ){
+ const char *zSql = (const char*)sqlite3_column_text(pSql, 0);
+ p->rc = sqlite3_exec(p->dbMain, zSql, 0, 0, &p->zErrmsg);
+ }
+ rbuFinalize(p, pSql);
+ if( p->rc!=SQLITE_OK ) return;
+
+ if( p->rc==SQLITE_OK ){
+ p->rc = prepareAndCollectError(p->dbRbu, &pSql, &p->zErrmsg,
+ "SELECT * FROM sqlite_master WHERE rootpage=0 OR rootpage IS NULL"
+ );
+ }
+
+ if( p->rc==SQLITE_OK ){
+ p->rc = prepareAndCollectError(p->dbMain, &pInsert, &p->zErrmsg,
+ "INSERT INTO sqlite_master VALUES(?,?,?,?,?)"
+ );
+ }
+
+ while( p->rc==SQLITE_OK && sqlite3_step(pSql)==SQLITE_ROW ){
+ int i;
+ for(i=0; i<5; i++){
+ sqlite3_bind_value(pInsert, i+1, sqlite3_column_value(pSql, i));
+ }
+ sqlite3_step(pInsert);
+ p->rc = sqlite3_reset(pInsert);
+ }
+ if( p->rc==SQLITE_OK ){
+ p->rc = sqlite3_exec(p->dbMain, "PRAGMA writable_schema=0",0,0,&p->zErrmsg);
+ }
+
+ rbuFinalize(p, pSql);
+ rbuFinalize(p, pInsert);
+}
+
/*
** Step the RBU object.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_step(sqlite3rbu *p){
+SQLITE_API int sqlite3rbu_step(sqlite3rbu *p){
if( p ){
switch( p->eStage ){
case RBU_STAGE_OAL: {
RbuObjIter *pIter = &p->objiter;
+
+ /* If this is an RBU vacuum operation and the state table was empty
+ ** when this handle was opened, create the target database schema. */
+ if( rbuIsVacuum(p) && p->nProgress==0 && p->rc==SQLITE_OK ){
+ rbuCreateTargetSchema(p);
+ rbuCopyPragma(p, "user_version");
+ rbuCopyPragma(p, "application_id");
+ }
+
while( p->rc==SQLITE_OK && pIter->zTbl ){
if( pIter->bCleanup ){
/* Clean up the rbu_tmp_xxx table for the previous table. It
** cannot be dropped as there are currently active SQL statements.
** But the contents can be deleted. */
- if( pIter->abIndexed ){
+ if( rbuIsVacuum(p)==0 && pIter->abIndexed ){
rbuMPrintfExec(p, p->dbRbu,
"DELETE FROM %s.'rbu_tmp_%q'", p->zStateDb, pIter->zDataTbl
);
p->rc = SQLITE_DONE;
}
}else{
- RbuFrame *pFrame = &p->aFrame[p->nStep];
- rbuCheckpointFrame(p, pFrame);
- p->nStep++;
+ /* At one point the following block copied a single frame from the
+ ** wal file to the database file. So that one call to sqlite3rbu_step()
+ ** checkpointed a single frame.
+ **
+ ** However, if the sector-size is larger than the page-size, and the
+ ** application calls sqlite3rbu_savestate() or close() immediately
+ ** after this step, then rbu_step() again, then a power failure occurs,
+ ** then the database page written here may be damaged. Work around
+ ** this by checkpointing frames until the next page in the aFrame[]
+ ** lies on a different disk sector to the current one. */
+ u32 iSector;
+ do{
+ RbuFrame *pFrame = &p->aFrame[p->nStep];
+ iSector = (pFrame->iDbPage-1) / p->nPagePerSector;
+ rbuCheckpointFrame(p, pFrame);
+ p->nStep++;
+ }while( p->nStep<p->nFrame
+ && iSector==((p->aFrame[p->nStep].iDbPage-1) / p->nPagePerSector)
+ && p->rc==SQLITE_OK
+ );
}
p->nProgress++;
}
}
}
-/*
-** Free an RbuState object allocated by rbuLoadState().
-*/
-static void rbuFreeState(RbuState *p){
- if( p ){
- sqlite3_free(p->zTbl);
- sqlite3_free(p->zIdx);
- sqlite3_free(p);
- }
-}
-
-/*
-** Allocate an RbuState object and load the contents of the rbu_state
-** table into it. Return a pointer to the new object. It is the
-** responsibility of the caller to eventually free the object using
-** sqlite3_free().
-**
-** If an error occurs, leave an error code and message in the rbu handle
-** and return NULL.
-*/
-static RbuState *rbuLoadState(sqlite3rbu *p){
- RbuState *pRet = 0;
- sqlite3_stmt *pStmt = 0;
- int rc;
- int rc2;
-
- pRet = (RbuState*)rbuMalloc(p, sizeof(RbuState));
- if( pRet==0 ) return 0;
-
- rc = prepareFreeAndCollectError(p->dbRbu, &pStmt, &p->zErrmsg,
- sqlite3_mprintf("SELECT k, v FROM %s.rbu_state", p->zStateDb)
- );
- while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){
- switch( sqlite3_column_int(pStmt, 0) ){
- case RBU_STATE_STAGE:
- pRet->eStage = sqlite3_column_int(pStmt, 1);
- if( pRet->eStage!=RBU_STAGE_OAL
- && pRet->eStage!=RBU_STAGE_MOVE
- && pRet->eStage!=RBU_STAGE_CKPT
- ){
- p->rc = SQLITE_CORRUPT;
- }
- break;
-
- case RBU_STATE_TBL:
- pRet->zTbl = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc);
- break;
-
- case RBU_STATE_IDX:
- pRet->zIdx = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc);
- break;
-
- case RBU_STATE_ROW:
- pRet->nRow = sqlite3_column_int(pStmt, 1);
- break;
-
- case RBU_STATE_PROGRESS:
- pRet->nProgress = sqlite3_column_int64(pStmt, 1);
- break;
-
- case RBU_STATE_CKPT:
- pRet->iWalCksum = sqlite3_column_int64(pStmt, 1);
- break;
-
- case RBU_STATE_COOKIE:
- pRet->iCookie = (u32)sqlite3_column_int64(pStmt, 1);
- break;
-
- case RBU_STATE_OALSZ:
- pRet->iOalSz = (u32)sqlite3_column_int64(pStmt, 1);
- break;
-
- default:
- rc = SQLITE_CORRUPT;
- break;
- }
- }
- rc2 = sqlite3_finalize(pStmt);
- if( rc==SQLITE_OK ) rc = rc2;
-
- p->rc = rc;
- return pRet;
-}
-
/*
** Compare strings z1 and z2, returning 0 if they are identical, or non-zero
** otherwise. Either or both argument may be NULL. Two NULL values are
sqlite3_vfs *pVfs = sqlite3_vfs_find(zRnd);
assert( pVfs );
p->zVfsName = pVfs->zName;
+ ((rbu_vfs*)pVfs)->pRbu = p;
}
}
}
/*
-** Open and return a new RBU handle.
+** This user-defined SQL function is invoked with a single argument - the
+** name of a table expected to appear in the target database. It returns
+** the number of auxilliary indexes on the table.
+*/
+static void rbuIndexCntFunc(
+ sqlite3_context *pCtx,
+ int nVal,
+ sqlite3_value **apVal
+){
+ sqlite3rbu *p = (sqlite3rbu*)sqlite3_user_data(pCtx);
+ sqlite3_stmt *pStmt = 0;
+ char *zErrmsg = 0;
+ int rc;
+
+ assert( nVal==1 );
+
+ rc = prepareFreeAndCollectError(p->dbMain, &pStmt, &zErrmsg,
+ sqlite3_mprintf("SELECT count(*) FROM sqlite_master "
+ "WHERE type='index' AND tbl_name = %Q", sqlite3_value_text(apVal[0]))
+ );
+ if( rc!=SQLITE_OK ){
+ sqlite3_result_error(pCtx, zErrmsg, -1);
+ }else{
+ int nIndex = 0;
+ if( SQLITE_ROW==sqlite3_step(pStmt) ){
+ nIndex = sqlite3_column_int(pStmt, 0);
+ }
+ rc = sqlite3_finalize(pStmt);
+ if( rc==SQLITE_OK ){
+ sqlite3_result_int(pCtx, nIndex);
+ }else{
+ sqlite3_result_error(pCtx, sqlite3_errmsg(p->dbMain), -1);
+ }
+ }
+
+ sqlite3_free(zErrmsg);
+}
+
+/*
+** If the RBU database contains the rbu_count table, use it to initialize
+** the sqlite3rbu.nPhaseOneStep variable. The schema of the rbu_count table
+** is assumed to contain the same columns as:
+**
+** CREATE TABLE rbu_count(tbl TEXT PRIMARY KEY, cnt INTEGER) WITHOUT ROWID;
+**
+** There should be one row in the table for each data_xxx table in the
+** database. The 'tbl' column should contain the name of a data_xxx table,
+** and the cnt column the number of rows it contains.
+**
+** sqlite3rbu.nPhaseOneStep is initialized to the sum of (1 + nIndex) * cnt
+** for all rows in the rbu_count table, where nIndex is the number of
+** indexes on the corresponding target database table.
*/
-SQLITE_API sqlite3rbu *SQLITE_STDCALL sqlite3rbu_open(
+static void rbuInitPhaseOneSteps(sqlite3rbu *p){
+ if( p->rc==SQLITE_OK ){
+ sqlite3_stmt *pStmt = 0;
+ int bExists = 0; /* True if rbu_count exists */
+
+ p->nPhaseOneStep = -1;
+
+ p->rc = sqlite3_create_function(p->dbRbu,
+ "rbu_index_cnt", 1, SQLITE_UTF8, (void*)p, rbuIndexCntFunc, 0, 0
+ );
+
+ /* Check for the rbu_count table. If it does not exist, or if an error
+ ** occurs, nPhaseOneStep will be left set to -1. */
+ if( p->rc==SQLITE_OK ){
+ p->rc = prepareAndCollectError(p->dbRbu, &pStmt, &p->zErrmsg,
+ "SELECT 1 FROM sqlite_master WHERE tbl_name = 'rbu_count'"
+ );
+ }
+ if( p->rc==SQLITE_OK ){
+ if( SQLITE_ROW==sqlite3_step(pStmt) ){
+ bExists = 1;
+ }
+ p->rc = sqlite3_finalize(pStmt);
+ }
+
+ if( p->rc==SQLITE_OK && bExists ){
+ p->rc = prepareAndCollectError(p->dbRbu, &pStmt, &p->zErrmsg,
+ "SELECT sum(cnt * (1 + rbu_index_cnt(rbu_target_name(tbl))))"
+ "FROM rbu_count"
+ );
+ if( p->rc==SQLITE_OK ){
+ if( SQLITE_ROW==sqlite3_step(pStmt) ){
+ p->nPhaseOneStep = sqlite3_column_int64(pStmt, 0);
+ }
+ p->rc = sqlite3_finalize(pStmt);
+ }
+ }
+ }
+}
+
+
+static sqlite3rbu *openRbuHandle(
const char *zTarget,
const char *zRbu,
const char *zState
){
sqlite3rbu *p;
- int nTarget = strlen(zTarget);
- int nRbu = strlen(zRbu);
- int nState = zState ? strlen(zState) : 0;
+ size_t nTarget = zTarget ? strlen(zTarget) : 0;
+ size_t nRbu = strlen(zRbu);
+ size_t nByte = sizeof(sqlite3rbu) + nTarget+1 + nRbu+1;
- p = (sqlite3rbu*)sqlite3_malloc(sizeof(sqlite3rbu)+nTarget+1+nRbu+1+nState+1);
+ p = (sqlite3rbu*)sqlite3_malloc64(nByte);
if( p ){
RbuState *pState = 0;
memset(p, 0, sizeof(sqlite3rbu));
rbuCreateVfs(p);
- /* Open the target database */
+ /* Open the target, RBU and state databases */
if( p->rc==SQLITE_OK ){
- p->zTarget = (char*)&p[1];
- memcpy(p->zTarget, zTarget, nTarget+1);
- p->zRbu = &p->zTarget[nTarget+1];
+ char *pCsr = (char*)&p[1];
+ int bRetry = 0;
+ if( zTarget ){
+ p->zTarget = pCsr;
+ memcpy(p->zTarget, zTarget, nTarget+1);
+ pCsr += nTarget+1;
+ }
+ p->zRbu = pCsr;
memcpy(p->zRbu, zRbu, nRbu+1);
+ pCsr += nRbu+1;
if( zState ){
- p->zState = &p->zRbu[nRbu+1];
- memcpy(p->zState, zState, nState+1);
+ p->zState = rbuMPrintf(p, "%s", zState);
}
- rbuOpenDatabase(p);
- }
- /* If it has not already been created, create the rbu_state table */
- rbuMPrintfExec(p, p->dbRbu, RBU_CREATE_STATE, p->zStateDb);
+ /* If the first attempt to open the database file fails and the bRetry
+ ** flag it set, this means that the db was not opened because it seemed
+ ** to be a wal-mode db. But, this may have happened due to an earlier
+ ** RBU vacuum operation leaving an old wal file in the directory.
+ ** If this is the case, it will have been checkpointed and deleted
+ ** when the handle was closed and a second attempt to open the
+ ** database may succeed. */
+ rbuOpenDatabase(p, &bRetry);
+ if( bRetry ){
+ rbuOpenDatabase(p, 0);
+ }
+ }
if( p->rc==SQLITE_OK ){
pState = rbuLoadState(p);
if( pState->eStage==0 ){
rbuDeleteOalFile(p);
+ rbuInitPhaseOneSteps(p);
p->eStage = RBU_STAGE_OAL;
}else{
p->eStage = pState->eStage;
+ p->nPhaseOneStep = pState->nPhaseOneStep;
}
p->nProgress = pState->nProgress;
p->iOalSz = pState->iOalSz;
}
}
- if( p->rc==SQLITE_OK
+ if( p->rc==SQLITE_OK
&& (p->eStage==RBU_STAGE_OAL || p->eStage==RBU_STAGE_MOVE)
- && pState->eStage!=0 && p->pTargetFd->iCookie!=pState->iCookie
- ){
- /* At this point (pTargetFd->iCookie) contains the value of the
- ** change-counter cookie (the thing that gets incremented when a
- ** transaction is committed in rollback mode) currently stored on
- ** page 1 of the database file. */
- p->rc = SQLITE_BUSY;
- p->zErrmsg = sqlite3_mprintf("database modified during rbu update");
+ && pState->eStage!=0
+ ){
+ rbu_file *pFd = (rbuIsVacuum(p) ? p->pRbuFd : p->pTargetFd);
+ if( pFd->iCookie!=pState->iCookie ){
+ /* At this point (pTargetFd->iCookie) contains the value of the
+ ** change-counter cookie (the thing that gets incremented when a
+ ** transaction is committed in rollback mode) currently stored on
+ ** page 1 of the database file. */
+ p->rc = SQLITE_BUSY;
+ p->zErrmsg = sqlite3_mprintf("database modified during rbu %s",
+ (rbuIsVacuum(p) ? "vacuum" : "update")
+ );
+ }
}
if( p->rc==SQLITE_OK ){
if( p->eStage==RBU_STAGE_OAL ){
sqlite3 *db = p->dbMain;
-
- /* Open transactions both databases. The *-oal file is opened or
- ** created at this point. */
- p->rc = sqlite3_exec(db, "BEGIN IMMEDIATE", 0, 0, &p->zErrmsg);
- if( p->rc==SQLITE_OK ){
- p->rc = sqlite3_exec(p->dbRbu, "BEGIN IMMEDIATE", 0, 0, &p->zErrmsg);
- }
-
- /* Check if the main database is a zipvfs db. If it is, set the upper
- ** level pager to use "journal_mode=off". This prevents it from
- ** generating a large journal using a temp file. */
- if( p->rc==SQLITE_OK ){
- int frc = sqlite3_file_control(db, "main", SQLITE_FCNTL_ZIPVFS, 0);
- if( frc==SQLITE_OK ){
- p->rc = sqlite3_exec(db, "PRAGMA journal_mode=off",0,0,&p->zErrmsg);
- }
- }
+ p->rc = sqlite3_exec(p->dbRbu, "BEGIN", 0, 0, &p->zErrmsg);
/* Point the object iterator at the first object */
if( p->rc==SQLITE_OK ){
** update finished. */
if( p->rc==SQLITE_OK && p->objiter.zTbl==0 ){
p->rc = SQLITE_DONE;
- }
+ p->eStage = RBU_STAGE_DONE;
+ }else{
+ if( p->rc==SQLITE_OK && pState->eStage==0 && rbuIsVacuum(p) ){
+ rbuCopyPragma(p, "page_size");
+ rbuCopyPragma(p, "auto_vacuum");
+ }
- if( p->rc==SQLITE_OK ){
- rbuSetupOal(p, pState);
- }
+ /* Open transactions both databases. The *-oal file is opened or
+ ** created at this point. */
+ if( p->rc==SQLITE_OK ){
+ p->rc = sqlite3_exec(db, "BEGIN IMMEDIATE", 0, 0, &p->zErrmsg);
+ }
+
+ /* Check if the main database is a zipvfs db. If it is, set the upper
+ ** level pager to use "journal_mode=off". This prevents it from
+ ** generating a large journal using a temp file. */
+ if( p->rc==SQLITE_OK ){
+ int frc = sqlite3_file_control(db, "main", SQLITE_FCNTL_ZIPVFS, 0);
+ if( frc==SQLITE_OK ){
+ p->rc = sqlite3_exec(
+ db, "PRAGMA journal_mode=off",0,0,&p->zErrmsg);
+ }
+ }
+ if( p->rc==SQLITE_OK ){
+ rbuSetupOal(p, pState);
+ }
+ }
}else if( p->eStage==RBU_STAGE_MOVE ){
/* no-op */
}else if( p->eStage==RBU_STAGE_CKPT ){
return p;
}
+/*
+** Allocate and return an RBU handle with all fields zeroed except for the
+** error code, which is set to SQLITE_MISUSE.
+*/
+static sqlite3rbu *rbuMisuseError(void){
+ sqlite3rbu *pRet;
+ pRet = sqlite3_malloc64(sizeof(sqlite3rbu));
+ if( pRet ){
+ memset(pRet, 0, sizeof(sqlite3rbu));
+ pRet->rc = SQLITE_MISUSE;
+ }
+ return pRet;
+}
+
+/*
+** Open and return a new RBU handle.
+*/
+SQLITE_API sqlite3rbu *sqlite3rbu_open(
+ const char *zTarget,
+ const char *zRbu,
+ const char *zState
+){
+ if( zTarget==0 || zRbu==0 ){ return rbuMisuseError(); }
+ /* TODO: Check that zTarget and zRbu are non-NULL */
+ return openRbuHandle(zTarget, zRbu, zState);
+}
+
+/*
+** Open a handle to begin or resume an RBU VACUUM operation.
+*/
+SQLITE_API sqlite3rbu *sqlite3rbu_vacuum(
+ const char *zTarget,
+ const char *zState
+){
+ if( zTarget==0 ){ return rbuMisuseError(); }
+ /* TODO: Check that both arguments are non-NULL */
+ return openRbuHandle(0, zTarget, zState);
+}
/*
** Return the database handle used by pRbu.
*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3rbu_db(sqlite3rbu *pRbu, int bRbu){
+SQLITE_API sqlite3 *sqlite3rbu_db(sqlite3rbu *pRbu, int bRbu){
sqlite3 *db = 0;
if( pRbu ){
db = (bRbu ? pRbu->dbRbu : pRbu->dbMain);
*/
static void rbuEditErrmsg(sqlite3rbu *p){
if( p->rc==SQLITE_CONSTRAINT && p->zErrmsg ){
- int i;
- int nErrmsg = strlen(p->zErrmsg);
+ unsigned int i;
+ size_t nErrmsg = strlen(p->zErrmsg);
for(i=0; i<(nErrmsg-8); i++){
if( memcmp(&p->zErrmsg[i], "rbu_imp_", 8)==0 ){
int nDel = 8;
/*
** Close the RBU handle.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){
+SQLITE_API int sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){
int rc;
if( p ){
p->rc = sqlite3_exec(p->dbMain, "COMMIT", 0, 0, &p->zErrmsg);
}
+ /* Sync the db file if currently doing an incremental checkpoint */
+ if( p->rc==SQLITE_OK && p->eStage==RBU_STAGE_CKPT ){
+ sqlite3_file *pDb = p->pTargetFd->pReal;
+ p->rc = pDb->pMethods->xSync(pDb, SQLITE_SYNC_NORMAL);
+ }
+
rbuSaveState(p, p->eStage);
if( p->rc==SQLITE_OK && p->eStage==RBU_STAGE_OAL ){
/* Close any open statement handles. */
rbuObjIterFinalize(&p->objiter);
+ /* If this is an RBU vacuum handle and the vacuum has either finished
+ ** successfully or encountered an error, delete the contents of the
+ ** state table. This causes the next call to sqlite3rbu_vacuum()
+ ** specifying the current target and state databases to start a new
+ ** vacuum from scratch. */
+ if( rbuIsVacuum(p) && p->rc!=SQLITE_OK && p->dbRbu ){
+ int rc2 = sqlite3_exec(p->dbRbu, "DELETE FROM stat.rbu_state", 0, 0, 0);
+ if( p->rc==SQLITE_DONE && rc2!=SQLITE_OK ) p->rc = rc2;
+ }
+
/* Close the open database handle and VFS object. */
- sqlite3_close(p->dbMain);
sqlite3_close(p->dbRbu);
+ sqlite3_close(p->dbMain);
+ assert( p->szTemp==0 );
rbuDeleteVfs(p);
sqlite3_free(p->aBuf);
sqlite3_free(p->aFrame);
rbuEditErrmsg(p);
rc = p->rc;
- *pzErrmsg = p->zErrmsg;
+ if( pzErrmsg ){
+ *pzErrmsg = p->zErrmsg;
+ }else{
+ sqlite3_free(p->zErrmsg);
+ }
+ sqlite3_free(p->zState);
sqlite3_free(p);
}else{
rc = SQLITE_NOMEM;
** updates) that have been performed on the target database since the
** current RBU update was started.
*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3rbu_progress(sqlite3rbu *pRbu){
+SQLITE_API sqlite3_int64 sqlite3rbu_progress(sqlite3rbu *pRbu){
return pRbu->nProgress;
}
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_savestate(sqlite3rbu *p){
+/*
+** Return permyriadage progress indications for the two main stages of
+** an RBU update.
+*/
+SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *p, int *pnOne, int *pnTwo){
+ const int MAX_PROGRESS = 10000;
+ switch( p->eStage ){
+ case RBU_STAGE_OAL:
+ if( p->nPhaseOneStep>0 ){
+ *pnOne = (int)(MAX_PROGRESS * (i64)p->nProgress/(i64)p->nPhaseOneStep);
+ }else{
+ *pnOne = -1;
+ }
+ *pnTwo = 0;
+ break;
+
+ case RBU_STAGE_MOVE:
+ *pnOne = MAX_PROGRESS;
+ *pnTwo = 0;
+ break;
+
+ case RBU_STAGE_CKPT:
+ *pnOne = MAX_PROGRESS;
+ *pnTwo = (int)(MAX_PROGRESS * (i64)p->nStep / (i64)p->nFrame);
+ break;
+
+ case RBU_STAGE_DONE:
+ *pnOne = MAX_PROGRESS;
+ *pnTwo = MAX_PROGRESS;
+ break;
+
+ default:
+ assert( 0 );
+ }
+}
+
+/*
+** Return the current state of the RBU vacuum or update operation.
+*/
+SQLITE_API int sqlite3rbu_state(sqlite3rbu *p){
+ int aRes[] = {
+ 0, SQLITE_RBU_STATE_OAL, SQLITE_RBU_STATE_MOVE,
+ 0, SQLITE_RBU_STATE_CHECKPOINT, SQLITE_RBU_STATE_DONE
+ };
+
+ assert( RBU_STAGE_OAL==1 );
+ assert( RBU_STAGE_MOVE==2 );
+ assert( RBU_STAGE_CKPT==4 );
+ assert( RBU_STAGE_DONE==5 );
+ assert( aRes[RBU_STAGE_OAL]==SQLITE_RBU_STATE_OAL );
+ assert( aRes[RBU_STAGE_MOVE]==SQLITE_RBU_STATE_MOVE );
+ assert( aRes[RBU_STAGE_CKPT]==SQLITE_RBU_STATE_CHECKPOINT );
+ assert( aRes[RBU_STAGE_DONE]==SQLITE_RBU_STATE_DONE );
+
+ if( p->rc!=SQLITE_OK && p->rc!=SQLITE_DONE ){
+ return SQLITE_RBU_STATE_ERROR;
+ }else{
+ assert( p->rc!=SQLITE_DONE || p->eStage==RBU_STAGE_DONE );
+ assert( p->eStage==RBU_STAGE_OAL
+ || p->eStage==RBU_STAGE_MOVE
+ || p->eStage==RBU_STAGE_CKPT
+ || p->eStage==RBU_STAGE_DONE
+ );
+ return aRes[p->eStage];
+ }
+}
+
+SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *p){
int rc = p->rc;
-
if( rc==SQLITE_DONE ) return SQLITE_OK;
assert( p->eStage>=RBU_STAGE_OAL && p->eStage<=RBU_STAGE_DONE );
if( rc==SQLITE_OK ) rc = sqlite3_exec(p->dbMain, "COMMIT", 0, 0, 0);
}
+ /* Sync the db file */
+ if( rc==SQLITE_OK && p->eStage==RBU_STAGE_CKPT ){
+ sqlite3_file *pDb = p->pTargetFd->pReal;
+ rc = pDb->pMethods->xSync(pDb, SQLITE_SYNC_NORMAL);
+ }
+
p->rc = rc;
rbuSaveState(p, p->eStage);
rc = p->rc;
*/
static void rbuUnlockShm(rbu_file *p){
+ assert( p->openFlags & SQLITE_OPEN_MAIN_DB );
if( p->pRbu ){
int (*xShmLock)(sqlite3_file*,int,int,int) = p->pReal->pMethods->xShmLock;
int i;
}
}
+/*
+*/
+static int rbuUpdateTempSize(rbu_file *pFd, sqlite3_int64 nNew){
+ sqlite3rbu *pRbu = pFd->pRbu;
+ i64 nDiff = nNew - pFd->sz;
+ pRbu->szTemp += nDiff;
+ pFd->sz = nNew;
+ assert( pRbu->szTemp>=0 );
+ if( pRbu->szTempLimit && pRbu->szTemp>pRbu->szTempLimit ) return SQLITE_FULL;
+ return SQLITE_OK;
+}
+
/*
** Close an rbu file.
*/
rbuUnlockShm(p);
p->pReal->pMethods->xShmUnmap(p->pReal, 0);
}
+ else if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){
+ rbuUpdateTempSize(p, 0);
+ }
/* Close the underlying file handle */
rc = p->pReal->pMethods->xClose(p->pReal);
+ ((u32)aBuf[3]);
}
+/*
+** Write an unsigned 32-bit value in big-endian format to the supplied
+** buffer.
+*/
+static void rbuPutU32(u8 *aBuf, u32 iVal){
+ aBuf[0] = (iVal >> 24) & 0xFF;
+ aBuf[1] = (iVal >> 16) & 0xFF;
+ aBuf[2] = (iVal >> 8) & 0xFF;
+ aBuf[3] = (iVal >> 0) & 0xFF;
+}
+
+static void rbuPutU16(u8 *aBuf, u16 iVal){
+ aBuf[0] = (iVal >> 8) & 0xFF;
+ aBuf[1] = (iVal >> 0) & 0xFF;
+}
+
/*
** Read data from an rbuVfs-file.
*/
memset(zBuf, 0, iAmt);
}else{
rc = p->pReal->pMethods->xRead(p->pReal, zBuf, iAmt, iOfst);
+#if 1
+ /* If this is being called to read the first page of the target
+ ** database as part of an rbu vacuum operation, synthesize the
+ ** contents of the first page if it does not yet exist. Otherwise,
+ ** SQLite will not check for a *-wal file. */
+ if( pRbu && rbuIsVacuum(pRbu)
+ && rc==SQLITE_IOERR_SHORT_READ && iOfst==0
+ && (p->openFlags & SQLITE_OPEN_MAIN_DB)
+ && pRbu->rc==SQLITE_OK
+ ){
+ sqlite3_file *pFd = (sqlite3_file*)pRbu->pRbuFd;
+ rc = pFd->pMethods->xRead(pFd, zBuf, iAmt, iOfst);
+ if( rc==SQLITE_OK ){
+ u8 *aBuf = (u8*)zBuf;
+ u32 iRoot = rbuGetU32(&aBuf[52]) ? 1 : 0;
+ rbuPutU32(&aBuf[52], iRoot); /* largest root page number */
+ rbuPutU32(&aBuf[36], 0); /* number of free pages */
+ rbuPutU32(&aBuf[32], 0); /* first page on free list trunk */
+ rbuPutU32(&aBuf[28], 1); /* size of db file in pages */
+ rbuPutU32(&aBuf[24], pRbu->pRbuFd->iCookie+1); /* Change counter */
+
+ if( iAmt>100 ){
+ memset(&aBuf[100], 0, iAmt-100);
+ rbuPutU16(&aBuf[105], iAmt & 0xFFFF);
+ aBuf[100] = 0x0D;
+ }
+ }
+ }
+#endif
}
if( rc==SQLITE_OK && iOfst==0 && (p->openFlags & SQLITE_OPEN_MAIN_DB) ){
/* These look like magic numbers. But they are stable, as they are part
assert( p->openFlags & SQLITE_OPEN_MAIN_DB );
rc = rbuCaptureDbWrite(p->pRbu, iOfst);
}else{
- if( pRbu && pRbu->eStage==RBU_STAGE_OAL
- && (p->openFlags & SQLITE_OPEN_WAL)
- && iOfst>=pRbu->iOalSz
- ){
- pRbu->iOalSz = iAmt + iOfst;
+ if( pRbu ){
+ if( pRbu->eStage==RBU_STAGE_OAL
+ && (p->openFlags & SQLITE_OPEN_WAL)
+ && iOfst>=pRbu->iOalSz
+ ){
+ pRbu->iOalSz = iAmt + iOfst;
+ }else if( p->openFlags & SQLITE_OPEN_DELETEONCLOSE ){
+ i64 szNew = iAmt+iOfst;
+ if( szNew>p->sz ){
+ rc = rbuUpdateTempSize(p, szNew);
+ if( rc!=SQLITE_OK ) return rc;
+ }
+ }
}
rc = p->pReal->pMethods->xWrite(p->pReal, zBuf, iAmt, iOfst);
if( rc==SQLITE_OK && iOfst==0 && (p->openFlags & SQLITE_OPEN_MAIN_DB) ){
*/
static int rbuVfsTruncate(sqlite3_file *pFile, sqlite_int64 size){
rbu_file *p = (rbu_file*)pFile;
+ if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){
+ int rc = rbuUpdateTempSize(p, size);
+ if( rc!=SQLITE_OK ) return rc;
+ }
return p->pReal->pMethods->xTruncate(p->pReal, size);
}
*/
static int rbuVfsFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){
rbu_file *p = (rbu_file *)pFile;
- return p->pReal->pMethods->xFileSize(p->pReal, pSize);
+ int rc;
+ rc = p->pReal->pMethods->xFileSize(p->pReal, pSize);
+
+ /* If this is an RBU vacuum operation and this is the target database,
+ ** pretend that it has at least one page. Otherwise, SQLite will not
+ ** check for the existance of a *-wal file. rbuVfsRead() contains
+ ** similar logic. */
+ if( rc==SQLITE_OK && *pSize==0
+ && p->pRbu && rbuIsVacuum(p->pRbu)
+ && (p->openFlags & SQLITE_OPEN_MAIN_DB)
+ ){
+ *pSize = 1024;
+ }
+ return rc;
}
/*
int rc = SQLITE_OK;
assert( p->openFlags & (SQLITE_OPEN_MAIN_DB|SQLITE_OPEN_TEMP_DB) );
- if( pRbu && eLock==SQLITE_LOCK_EXCLUSIVE && pRbu->eStage!=RBU_STAGE_DONE ){
+ if( eLock==SQLITE_LOCK_EXCLUSIVE
+ && (p->bNolock || (pRbu && pRbu->eStage!=RBU_STAGE_DONE))
+ ){
/* Do not allow EXCLUSIVE locks. Preventing SQLite from taking this
** prevents it from checkpointing the database from sqlite3_close(). */
rc = SQLITE_BUSY;
}
return rc;
}
+ else if( op==SQLITE_FCNTL_RBUCNT ){
+ sqlite3rbu *pRbu = (sqlite3rbu*)pArg;
+ pRbu->nRbu++;
+ pRbu->pRbuFd = p;
+ p->bNolock = 1;
+ }
rc = xControl(p->pReal, op, pArg);
if( rc==SQLITE_OK && op==SQLITE_FCNTL_VFSNAME ){
if( eStage==RBU_STAGE_OAL || eStage==RBU_STAGE_MOVE ){
if( iRegion<=p->nShm ){
int nByte = (iRegion+1) * sizeof(char*);
- char **apNew = (char**)sqlite3_realloc(p->apShm, nByte);
+ char **apNew = (char**)sqlite3_realloc64(p->apShm, nByte);
if( apNew==0 ){
rc = SQLITE_NOMEM;
}else{
}
if( rc==SQLITE_OK && p->apShm[iRegion]==0 ){
- char *pNew = (char*)sqlite3_malloc(szRegion);
+ char *pNew = (char*)sqlite3_malloc64(szRegion);
if( pNew==0 ){
rc = SQLITE_NOMEM;
}else{
static rbu_file *rbuFindMaindb(rbu_vfs *pRbuVfs, const char *zWal){
rbu_file *pDb;
sqlite3_mutex_enter(pRbuVfs->mutex);
- for(pDb=pRbuVfs->pMain; pDb && pDb->zWal!=zWal; pDb=pDb->pMainNext);
+ for(pDb=pRbuVfs->pMain; pDb && pDb->zWal!=zWal; pDb=pDb->pMainNext){}
sqlite3_mutex_leave(pRbuVfs->mutex);
return pDb;
}
+/*
+** A main database named zName has just been opened. The following
+** function returns a pointer to a buffer owned by SQLite that contains
+** the name of the *-wal file this db connection will use. SQLite
+** happens to pass a pointer to this buffer when using xAccess()
+** or xOpen() to operate on the *-wal file.
+*/
+static const char *rbuMainToWal(const char *zName, int flags){
+ int n = (int)strlen(zName);
+ const char *z = &zName[n];
+ if( flags & SQLITE_OPEN_URI ){
+ int odd = 0;
+ while( 1 ){
+ if( z[0]==0 ){
+ odd = 1 - odd;
+ if( odd && z[1]==0 ) break;
+ }
+ z++;
+ }
+ z += 2;
+ }else{
+ while( *z==0 ) z++;
+ }
+ z += (n + 8 + 1);
+ return z;
+}
+
/*
** Open an rbu file handle.
*/
rbu_file *pFd = (rbu_file *)pFile;
int rc = SQLITE_OK;
const char *zOpen = zName;
+ int oflags = flags;
memset(pFd, 0, sizeof(rbu_file));
pFd->pReal = (sqlite3_file*)&pFd[1];
** the name of the *-wal file this db connection will use. SQLite
** happens to pass a pointer to this buffer when using xAccess()
** or xOpen() to operate on the *-wal file. */
- int n = strlen(zName);
- const char *z = &zName[n];
- if( flags & SQLITE_OPEN_URI ){
- int odd = 0;
- while( 1 ){
- if( z[0]==0 ){
- odd = 1 - odd;
- if( odd && z[1]==0 ) break;
- }
- z++;
- }
- z += 2;
- }else{
- while( *z==0 ) z++;
- }
- z += (n + 8 + 1);
- pFd->zWal = z;
+ pFd->zWal = rbuMainToWal(zName, flags);
}
else if( flags & SQLITE_OPEN_WAL ){
rbu_file *pDb = rbuFindMaindb(pRbuVfs, zName);
** code ensures that the string passed to xOpen() is terminated by a
** pair of '\0' bytes in case the VFS attempts to extract a URI
** parameter from it. */
- int nCopy = strlen(zName);
- char *zCopy = sqlite3_malloc(nCopy+2);
+ const char *zBase = zName;
+ size_t nCopy;
+ char *zCopy;
+ if( rbuIsVacuum(pDb->pRbu) ){
+ zBase = sqlite3_db_filename(pDb->pRbu->dbRbu, "main");
+ zBase = rbuMainToWal(zBase, SQLITE_OPEN_URI);
+ }
+ nCopy = strlen(zBase);
+ zCopy = sqlite3_malloc64(nCopy+2);
if( zCopy ){
- memcpy(zCopy, zName, nCopy);
+ memcpy(zCopy, zBase, nCopy);
zCopy[nCopy-3] = 'o';
zCopy[nCopy] = '\0';
zCopy[nCopy+1] = '\0';
pDb->pWalFd = pFd;
}
}
+ }else{
+ pFd->pRbu = pRbuVfs->pRbu;
+ }
+
+ if( oflags & SQLITE_OPEN_MAIN_DB
+ && sqlite3_uri_boolean(zName, "rbu_memory", 0)
+ ){
+ assert( oflags & SQLITE_OPEN_MAIN_DB );
+ oflags = SQLITE_OPEN_TEMP_DB | SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE |
+ SQLITE_OPEN_EXCLUSIVE | SQLITE_OPEN_DELETEONCLOSE;
+ zOpen = 0;
}
if( rc==SQLITE_OK ){
- rc = pRealVfs->xOpen(pRealVfs, zOpen, pFd->pReal, flags, pOutFlags);
+ rc = pRealVfs->xOpen(pRealVfs, zOpen, pFd->pReal, oflags, pOutFlags);
}
if( pFd->pReal->pMethods ){
/* The xOpen() operation has succeeded. Set the sqlite3_file.pMethods
if( *pResOut ){
rc = SQLITE_CANTOPEN;
}else{
- *pResOut = 1;
+ sqlite3_int64 sz = 0;
+ rc = rbuVfsFileSize(&pDb->base, &sz);
+ *pResOut = (sz>0);
}
}
}
** Deregister and destroy an RBU vfs created by an earlier call to
** sqlite3rbu_create_vfs().
*/
-SQLITE_API void SQLITE_STDCALL sqlite3rbu_destroy_vfs(const char *zName){
+SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName){
sqlite3_vfs *pVfs = sqlite3_vfs_find(zName);
if( pVfs && pVfs->xOpen==rbuVfsOpen ){
sqlite3_mutex_free(((rbu_vfs*)pVfs)->mutex);
** via existing VFS zParent. The new object is registered as a non-default
** VFS with SQLite before returning.
*/
-SQLITE_API int SQLITE_STDCALL sqlite3rbu_create_vfs(const char *zName, const char *zParent){
+SQLITE_API int sqlite3rbu_create_vfs(const char *zName, const char *zParent){
/* Template for VFS */
static sqlite3_vfs vfs_template = {
};
rbu_vfs *pNew = 0; /* Newly allocated VFS */
- int nName;
int rc = SQLITE_OK;
+ size_t nName;
+ size_t nByte;
- int nByte;
nName = strlen(zName);
nByte = sizeof(rbu_vfs) + nName + 1;
- pNew = (rbu_vfs*)sqlite3_malloc(nByte);
+ pNew = (rbu_vfs*)sqlite3_malloc64(nByte);
if( pNew==0 ){
rc = SQLITE_NOMEM;
}else{
return rc;
}
+/*
+** Configure the aggregate temp file size limit for this RBU handle.
+*/
+SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu *pRbu, sqlite3_int64 n){
+ if( n>=0 ){
+ pRbu->szTempLimit = n;
+ }
+ return pRbu->szTempLimit;
+}
+
+SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu *pRbu){
+ return pRbu->szTemp;
+}
+
/**************************************************************************/
*/
#define VTAB_SCHEMA \
"CREATE TABLE xx( " \
- " name STRING, /* Name of table or index */" \
- " path INTEGER, /* Path to page from root */" \
+ " name TEXT, /* Name of table or index */" \
+ " path TEXT, /* Path to page from root */" \
" pageno INTEGER, /* Page number */" \
- " pagetype STRING, /* 'internal', 'leaf' or 'overflow' */" \
+ " pagetype TEXT, /* 'internal', 'leaf' or 'overflow' */" \
" ncell INTEGER, /* Cells on page (0 for overflow) */" \
" payload INTEGER, /* Bytes of payload on this page */" \
" unused INTEGER, /* Bytes of unused space on this page */" \
int iDb;
if( argc>=4 ){
- iDb = sqlite3FindDbName(db, argv[3]);
+ Token nm;
+ sqlite3TokenInit(&nm, (char*)argv[3]);
+ iDb = sqlite3FindDb(db, &nm);
if( iDb<0 ){
*pzErr = sqlite3_mprintf("no such database: %s", argv[3]);
return SQLITE_ERROR;
rc = sqlite3_declare_vtab(db, VTAB_SCHEMA);
if( rc==SQLITE_OK ){
pTab = (StatTable *)sqlite3_malloc64(sizeof(StatTable));
- if( pTab==0 ) rc = SQLITE_NOMEM;
+ if( pTab==0 ) rc = SQLITE_NOMEM_BKPT;
}
assert( rc==SQLITE_OK || pTab==0 );
pCsr = (StatCursor *)sqlite3_malloc64(sizeof(StatCursor));
if( pCsr==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}else{
memset(pCsr, 0, sizeof(StatCursor));
pCsr->base.pVtab = pVTab;
nUsable = szPage - sqlite3BtreeGetReserveNoMutex(pBt);
sqlite3BtreeLeave(pBt);
p->aCell = sqlite3_malloc64((p->nCell+1) * sizeof(StatCell));
- if( p->aCell==0 ) return SQLITE_NOMEM;
+ if( p->aCell==0 ) return SQLITE_NOMEM_BKPT;
memset(p->aCell, 0, (p->nCell+1) * sizeof(StatCell));
for(i=0; i<p->nCell; i++){
pCell->nLastOvfl = (nPayload-nLocal) - (nOvfl-1) * (nUsable-4);
pCell->nOvfl = nOvfl;
pCell->aOvfl = sqlite3_malloc64(sizeof(u32)*nOvfl);
- if( pCell->aOvfl==0 ) return SQLITE_NOMEM;
+ if( pCell->aOvfl==0 ) return SQLITE_NOMEM_BKPT;
pCell->aOvfl[0] = sqlite3Get4byte(&aData[iOff+nLocal]);
for(j=1; j<nOvfl; j++){
int rc;
u32 iPrev = pCell->aOvfl[j-1];
DbPage *pPg = 0;
- rc = sqlite3PagerGet(sqlite3BtreePager(pBt), iPrev, &pPg);
+ rc = sqlite3PagerGet(sqlite3BtreePager(pBt), iPrev, &pPg, 0);
if( rc!=SQLITE_OK ){
assert( pPg==0 );
return rc;
*/
fd = sqlite3PagerFile(pPager);
x[0] = pCsr->iPageno;
- if( fd->pMethods!=0 && sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){
+ if( sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){
pCsr->iOffset = x[0];
pCsr->szPage = (int)x[1];
}
pCsr->isEof = 1;
return sqlite3_reset(pCsr->pStmt);
}
- rc = sqlite3PagerGet(pPager, iRoot, &pCsr->aPage[0].pPg);
+ rc = sqlite3PagerGet(pPager, iRoot, &pCsr->aPage[0].pPg, 0);
pCsr->aPage[0].iPgno = iRoot;
pCsr->aPage[0].iCell = 0;
pCsr->aPage[0].zPath = z = sqlite3_mprintf("/");
pCsr->iPage = 0;
- if( z==0 ) rc = SQLITE_NOMEM;
+ if( z==0 ) rc = SQLITE_NOMEM_BKPT;
}else{
pCsr->isEof = 1;
return sqlite3_reset(pCsr->pStmt);
}
pCell->iOvfl++;
statSizeAndOffset(pCsr);
- return z==0 ? SQLITE_NOMEM : SQLITE_OK;
+ return z==0 ? SQLITE_NOMEM_BKPT : SQLITE_OK;
}
if( p->iRightChildPg ) break;
p->iCell++;
}else{
p[1].iPgno = p->aCell[p->iCell].iChildPg;
}
- rc = sqlite3PagerGet(pPager, p[1].iPgno, &p[1].pPg);
+ rc = sqlite3PagerGet(pPager, p[1].iPgno, &p[1].pPg, 0);
p[1].iCell = 0;
p[1].zPath = z = sqlite3_mprintf("%s%.3x/", p->zPath, p->iCell);
p->iCell++;
- if( z==0 ) rc = SQLITE_NOMEM;
+ if( z==0 ) rc = SQLITE_NOMEM_BKPT;
}
pCsr->nUnused = p->nUnused;
pCsr->nMxPayload = p->nMxPayload;
pCsr->zPath = z = sqlite3_mprintf("%s", p->zPath);
- if( z==0 ) rc = SQLITE_NOMEM;
+ if( z==0 ) rc = SQLITE_NOMEM_BKPT;
nPayload = 0;
for(i=0; i<p->nCell; i++){
nPayload += p->aCell[i].nLocal;
if( pCsr->iDb<0 ){
sqlite3_free(pCursor->pVtab->zErrMsg);
pCursor->pVtab->zErrMsg = sqlite3_mprintf("no such schema: %s", zDbase);
- return pCursor->pVtab->zErrMsg ? SQLITE_ERROR : SQLITE_NOMEM;
+ return pCursor->pVtab->zErrMsg ? SQLITE_ERROR : SQLITE_NOMEM_BKPT;
}
}else{
pCsr->iDb = pTab->iDb;
" UNION ALL "
"SELECT name, rootpage, type"
" FROM \"%w\".%s WHERE rootpage!=0"
- " ORDER BY name", pTab->db->aDb[pCsr->iDb].zName, zMaster);
+ " ORDER BY name", pTab->db->aDb[pCsr->iDb].zDbSName, zMaster);
if( zSql==0 ){
- return SQLITE_NOMEM;
+ return SQLITE_NOMEM_BKPT;
}else{
rc = sqlite3_prepare_v2(pTab->db, zSql, -1, &pCsr->pStmt, 0);
sqlite3_free(zSql);
default: { /* schema */
sqlite3 *db = sqlite3_context_db_handle(ctx);
int iDb = pCsr->iDb;
- sqlite3_result_text(ctx, db->aDb[iDb].zName, -1, SQLITE_STATIC);
+ sqlite3_result_text(ctx, db->aDb[iDb].zDbSName, -1, SQLITE_STATIC);
break;
}
}
0, /* xRollback */
0, /* xFindMethod */
0, /* xRename */
+ 0, /* xSavepoint */
+ 0, /* xRelease */
+ 0, /* xRollbackTo */
};
return sqlite3_create_module(db, "dbstat", &dbstat_module, 0);
}
#endif /* SQLITE_ENABLE_DBSTAT_VTAB */
/************** End of dbstat.c **********************************************/
-/************** Begin file json1.c *******************************************/
+/************** Begin file dbpage.c ******************************************/
/*
-** 2015-08-12
+** 2017-10-11
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
******************************************************************************
**
-** This SQLite extension implements JSON functions. The interface is
-** modeled after MySQL JSON functions:
+** This file contains an implementation of the "sqlite_dbpage" virtual table.
**
-** https://dev.mysql.com/doc/refman/5.7/en/json.html
+** The sqlite_dbpage virtual table is used to read or write whole raw
+** pages of the database file. The pager interface is used so that
+** uncommitted changes and changes recorded in the WAL file are correctly
+** retrieved.
**
-** For the time being, all JSON is stored as pure text. (We might add
-** a JSONB type in the future which stores a binary encoding of JSON in
-** a BLOB, but there is no support for JSONB in the current implementation.
-** This implementation parses JSON text at 250 MB/s, so it is hard to see
-** how JSONB might improve on that.)
+** Usage example:
+**
+** SELECT data FROM sqlite_dbpage('aux1') WHERE pgno=123;
+**
+** This is an eponymous virtual table so it does not need to be created before
+** use. The optional argument to the sqlite_dbpage() table name is the
+** schema for the database file that is to be read. The default schema is
+** "main".
+**
+** The data field of sqlite_dbpage table can be updated. The new
+** value must be a BLOB which is the correct page size, otherwise the
+** update fails. Rows may not be deleted or inserted.
*/
-#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_JSON1)
-#if !defined(_SQLITEINT_H_)
-/* #include "sqlite3ext.h" */
-#endif
-SQLITE_EXTENSION_INIT1
-/* #include <assert.h> */
-/* #include <string.h> */
-#include <ctype.h> /* amalgamator: keep */
-/* #include <stdlib.h> */
-/* #include <stdarg.h> */
-
-#define UNUSED_PARAM(X) (void)(X)
-#ifndef LARGEST_INT64
-# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32))
-# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64)
-#endif
+/* #include "sqliteInt.h" ** Requires access to internal data structures ** */
+#if (defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST)) \
+ && !defined(SQLITE_OMIT_VIRTUALTABLE)
-/*
-** Versions of isspace(), isalnum() and isdigit() to which it is safe
-** to pass signed char values.
-*/
-#define safe_isdigit(x) isdigit((unsigned char)(x))
-#define safe_isalnum(x) isalnum((unsigned char)(x))
+typedef struct DbpageTable DbpageTable;
+typedef struct DbpageCursor DbpageCursor;
-/*
-** Growing our own isspace() routine this way is twice as fast as
-** the library isspace() function, resulting in a 7% overall performance
-** increase for the parser. (Ubuntu14.10 gcc 4.8.4 x64 with -Os).
-*/
-static const char jsonIsSpace[] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+struct DbpageCursor {
+ sqlite3_vtab_cursor base; /* Base class. Must be first */
+ int pgno; /* Current page number */
+ int mxPgno; /* Last page to visit on this scan */
+ Pager *pPager; /* Pager being read/written */
+ DbPage *pPage1; /* Page 1 of the database */
+ int iDb; /* Index of database to analyze */
+ int szPage; /* Size of each page in bytes */
};
-#define safe_isspace(x) (jsonIsSpace[(unsigned char)x])
-
-#ifndef SQLITE_AMALGAMATION
- /* Unsigned integer types. These are already defined in the sqliteInt.h,
- ** but the definitions need to be repeated for separate compilation. */
- typedef sqlite3_uint64 u64;
- typedef unsigned int u32;
- typedef unsigned char u8;
-#endif
-
-/* Objects */
-typedef struct JsonString JsonString;
-typedef struct JsonNode JsonNode;
-typedef struct JsonParse JsonParse;
-/* An instance of this object represents a JSON string
-** under construction. Really, this is a generic string accumulator
-** that can be and is used to create strings other than JSON.
-*/
-struct JsonString {
- sqlite3_context *pCtx; /* Function context - put error messages here */
- char *zBuf; /* Append JSON content here */
- u64 nAlloc; /* Bytes of storage available in zBuf[] */
- u64 nUsed; /* Bytes of zBuf[] currently used */
- u8 bStatic; /* True if zBuf is static space */
- u8 bErr; /* True if an error has been encountered */
- char zSpace[100]; /* Initial static space */
+struct DbpageTable {
+ sqlite3_vtab base; /* Base class. Must be first */
+ sqlite3 *db; /* The database */
};
-/* JSON type values
-*/
-#define JSON_NULL 0
-#define JSON_TRUE 1
-#define JSON_FALSE 2
-#define JSON_INT 3
-#define JSON_REAL 4
-#define JSON_STRING 5
-#define JSON_ARRAY 6
-#define JSON_OBJECT 7
+/* Columns */
+#define DBPAGE_COLUMN_PGNO 0
+#define DBPAGE_COLUMN_DATA 1
+#define DBPAGE_COLUMN_SCHEMA 2
-/* The "subtype" set for JSON values */
-#define JSON_SUBTYPE 74 /* Ascii for "J" */
-/*
-** Names of the various JSON types:
-*/
-static const char * const jsonType[] = {
- "null", "true", "false", "integer", "real", "text", "array", "object"
-};
-/* Bit values for the JsonNode.jnFlag field
+/*
+** Connect to or create a dbpagevfs virtual table.
*/
-#define JNODE_RAW 0x01 /* Content is raw, not JSON encoded */
-#define JNODE_ESCAPE 0x02 /* Content is text with \ escapes */
-#define JNODE_REMOVE 0x04 /* Do not output */
-#define JNODE_REPLACE 0x08 /* Replace with JsonNode.iVal */
-#define JNODE_APPEND 0x10 /* More ARRAY/OBJECT entries at u.iAppend */
-#define JNODE_LABEL 0x20 /* Is a label of an object */
-
+static int dbpageConnect(
+ sqlite3 *db,
+ void *pAux,
+ int argc, const char *const*argv,
+ sqlite3_vtab **ppVtab,
+ char **pzErr
+){
+ DbpageTable *pTab = 0;
+ int rc = SQLITE_OK;
-/* A single node of parsed JSON
-*/
-struct JsonNode {
- u8 eType; /* One of the JSON_ type values */
- u8 jnFlags; /* JNODE flags */
- u8 iVal; /* Replacement value when JNODE_REPLACE */
- u32 n; /* Bytes of content, or number of sub-nodes */
- union {
- const char *zJContent; /* Content for INT, REAL, and STRING */
- u32 iAppend; /* More terms for ARRAY and OBJECT */
- u32 iKey; /* Key for ARRAY objects in json_tree() */
- } u;
-};
+ rc = sqlite3_declare_vtab(db,
+ "CREATE TABLE x(pgno INTEGER PRIMARY KEY, data BLOB, schema HIDDEN)");
+ if( rc==SQLITE_OK ){
+ pTab = (DbpageTable *)sqlite3_malloc64(sizeof(DbpageTable));
+ if( pTab==0 ) rc = SQLITE_NOMEM_BKPT;
+ }
-/* A completely parsed JSON string
-*/
-struct JsonParse {
- u32 nNode; /* Number of slots of aNode[] used */
- u32 nAlloc; /* Number of slots of aNode[] allocated */
- JsonNode *aNode; /* Array of nodes containing the parse */
- const char *zJson; /* Original JSON string */
- u32 *aUp; /* Index of parent of each node */
- u8 oom; /* Set to true if out of memory */
- u8 nErr; /* Number of errors seen */
-};
+ assert( rc==SQLITE_OK || pTab==0 );
+ if( rc==SQLITE_OK ){
+ memset(pTab, 0, sizeof(DbpageTable));
+ pTab->db = db;
+ }
-/**************************************************************************
-** Utility routines for dealing with JsonString objects
-**************************************************************************/
+ *ppVtab = (sqlite3_vtab*)pTab;
+ return rc;
+}
-/* Set the JsonString object to an empty string
+/*
+** Disconnect from or destroy a dbpagevfs virtual table.
*/
-static void jsonZero(JsonString *p){
- p->zBuf = p->zSpace;
- p->nAlloc = sizeof(p->zSpace);
- p->nUsed = 0;
- p->bStatic = 1;
+static int dbpageDisconnect(sqlite3_vtab *pVtab){
+ sqlite3_free(pVtab);
+ return SQLITE_OK;
}
-/* Initialize the JsonString object
+/*
+** idxNum:
+**
+** 0 schema=main, full table scan
+** 1 schema=main, pgno=?1
+** 2 schema=?1, full table scan
+** 3 schema=?1, pgno=?2
*/
-static void jsonInit(JsonString *p, sqlite3_context *pCtx){
- p->pCtx = pCtx;
- p->bErr = 0;
- jsonZero(p);
-}
+static int dbpageBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){
+ int i;
+ int iPlan = 0;
+ /* If there is a schema= constraint, it must be honored. Report a
+ ** ridiculously large estimated cost if the schema= constraint is
+ ** unavailable
+ */
+ for(i=0; i<pIdxInfo->nConstraint; i++){
+ struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i];
+ if( p->iColumn!=DBPAGE_COLUMN_SCHEMA ) continue;
+ if( p->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue;
+ if( !p->usable ){
+ /* No solution. Use the default SQLITE_BIG_DBL cost */
+ pIdxInfo->estimatedRows = 0x7fffffff;
+ return SQLITE_OK;
+ }
+ iPlan = 2;
+ pIdxInfo->aConstraintUsage[i].argvIndex = 1;
+ pIdxInfo->aConstraintUsage[i].omit = 1;
+ break;
+ }
-/* Free all allocated memory and reset the JsonString object back to its
-** initial state.
-*/
-static void jsonReset(JsonString *p){
- if( !p->bStatic ) sqlite3_free(p->zBuf);
- jsonZero(p);
-}
+ /* If we reach this point, it means that either there is no schema=
+ ** constraint (in which case we use the "main" schema) or else the
+ ** schema constraint was accepted. Lower the estimated cost accordingly
+ */
+ pIdxInfo->estimatedCost = 1.0e6;
+ /* Check for constraints against pgno */
+ for(i=0; i<pIdxInfo->nConstraint; i++){
+ struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i];
+ if( p->usable && p->iColumn<=0 && p->op==SQLITE_INDEX_CONSTRAINT_EQ ){
+ pIdxInfo->estimatedRows = 1;
+ pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE;
+ pIdxInfo->estimatedCost = 1.0;
+ pIdxInfo->aConstraintUsage[i].argvIndex = iPlan ? 2 : 1;
+ pIdxInfo->aConstraintUsage[i].omit = 1;
+ iPlan |= 1;
+ break;
+ }
+ }
+ pIdxInfo->idxNum = iPlan;
-/* Report an out-of-memory (OOM) condition
-*/
-static void jsonOom(JsonString *p){
- p->bErr = 1;
- sqlite3_result_error_nomem(p->pCtx);
- jsonReset(p);
+ if( pIdxInfo->nOrderBy>=1
+ && pIdxInfo->aOrderBy[0].iColumn<=0
+ && pIdxInfo->aOrderBy[0].desc==0
+ ){
+ pIdxInfo->orderByConsumed = 1;
+ }
+ return SQLITE_OK;
}
-/* Enlarge pJson->zBuf so that it can hold at least N more bytes.
-** Return zero on success. Return non-zero on an OOM error
+/*
+** Open a new dbpagevfs cursor.
*/
-static int jsonGrow(JsonString *p, u32 N){
- u64 nTotal = N<p->nAlloc ? p->nAlloc*2 : p->nAlloc+N+10;
- char *zNew;
- if( p->bStatic ){
- if( p->bErr ) return 1;
- zNew = sqlite3_malloc64(nTotal);
- if( zNew==0 ){
- jsonOom(p);
- return SQLITE_NOMEM;
- }
- memcpy(zNew, p->zBuf, (size_t)p->nUsed);
- p->zBuf = zNew;
- p->bStatic = 0;
+static int dbpageOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){
+ DbpageCursor *pCsr;
+
+ pCsr = (DbpageCursor *)sqlite3_malloc64(sizeof(DbpageCursor));
+ if( pCsr==0 ){
+ return SQLITE_NOMEM_BKPT;
}else{
- zNew = sqlite3_realloc64(p->zBuf, nTotal);
- if( zNew==0 ){
- jsonOom(p);
- return SQLITE_NOMEM;
- }
- p->zBuf = zNew;
+ memset(pCsr, 0, sizeof(DbpageCursor));
+ pCsr->base.pVtab = pVTab;
+ pCsr->pgno = -1;
}
- p->nAlloc = nTotal;
+
+ *ppCursor = (sqlite3_vtab_cursor *)pCsr;
return SQLITE_OK;
}
-/* Append N bytes from zIn onto the end of the JsonString string.
+/*
+** Close a dbpagevfs cursor.
*/
-static void jsonAppendRaw(JsonString *p, const char *zIn, u32 N){
- if( (N+p->nUsed >= p->nAlloc) && jsonGrow(p,N)!=0 ) return;
- memcpy(p->zBuf+p->nUsed, zIn, N);
- p->nUsed += N;
+static int dbpageClose(sqlite3_vtab_cursor *pCursor){
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1);
+ sqlite3_free(pCsr);
+ return SQLITE_OK;
}
-/* Append formatted text (not to exceed N bytes) to the JsonString.
+/*
+** Move a dbpagevfs cursor to the next entry in the file.
*/
-static void jsonPrintf(int N, JsonString *p, const char *zFormat, ...){
- va_list ap;
- if( (p->nUsed + N >= p->nAlloc) && jsonGrow(p, N) ) return;
- va_start(ap, zFormat);
- sqlite3_vsnprintf(N, p->zBuf+p->nUsed, zFormat, ap);
- va_end(ap);
- p->nUsed += (int)strlen(p->zBuf+p->nUsed);
+static int dbpageNext(sqlite3_vtab_cursor *pCursor){
+ int rc = SQLITE_OK;
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ pCsr->pgno++;
+ return rc;
}
-/* Append a single character
-*/
-static void jsonAppendChar(JsonString *p, char c){
- if( p->nUsed>=p->nAlloc && jsonGrow(p,1)!=0 ) return;
- p->zBuf[p->nUsed++] = c;
+static int dbpageEof(sqlite3_vtab_cursor *pCursor){
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ return pCsr->pgno > pCsr->mxPgno;
}
-/* Append a comma separator to the output buffer, if the previous
-** character is not '[' or '{'.
+/*
+** idxNum:
+**
+** 0 schema=main, full table scan
+** 1 schema=main, pgno=?1
+** 2 schema=?1, full table scan
+** 3 schema=?1, pgno=?2
+**
+** idxStr is not used
*/
-static void jsonAppendSeparator(JsonString *p){
- char c;
- if( p->nUsed==0 ) return;
- c = p->zBuf[p->nUsed-1];
- if( c!='[' && c!='{' ) jsonAppendChar(p, ',');
-}
+static int dbpageFilter(
+ sqlite3_vtab_cursor *pCursor,
+ int idxNum, const char *idxStr,
+ int argc, sqlite3_value **argv
+){
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ DbpageTable *pTab = (DbpageTable *)pCursor->pVtab;
+ int rc;
+ sqlite3 *db = pTab->db;
+ Btree *pBt;
-/* Append the N-byte string in zIn to the end of the JsonString string
-** under construction. Enclose the string in "..." and escape
-** any double-quotes or backslash characters contained within the
-** string.
-*/
-static void jsonAppendString(JsonString *p, const char *zIn, u32 N){
- u32 i;
- if( (N+p->nUsed+2 >= p->nAlloc) && jsonGrow(p,N+2)!=0 ) return;
- p->zBuf[p->nUsed++] = '"';
- for(i=0; i<N; i++){
- char c = zIn[i];
- if( c=='"' || c=='\\' ){
- if( (p->nUsed+N+3-i > p->nAlloc) && jsonGrow(p,N+3-i)!=0 ) return;
- p->zBuf[p->nUsed++] = '\\';
+ /* Default setting is no rows of result */
+ pCsr->pgno = 1;
+ pCsr->mxPgno = 0;
+
+ if( idxNum & 2 ){
+ const char *zSchema;
+ assert( argc>=1 );
+ zSchema = (const char*)sqlite3_value_text(argv[0]);
+ pCsr->iDb = sqlite3FindDbName(db, zSchema);
+ if( pCsr->iDb<0 ) return SQLITE_OK;
+ }else{
+ pCsr->iDb = 0;
+ }
+ pBt = db->aDb[pCsr->iDb].pBt;
+ if( pBt==0 ) return SQLITE_OK;
+ pCsr->pPager = sqlite3BtreePager(pBt);
+ pCsr->szPage = sqlite3BtreeGetPageSize(pBt);
+ pCsr->mxPgno = sqlite3BtreeLastPage(pBt);
+ if( idxNum & 1 ){
+ assert( argc>(idxNum>>1) );
+ pCsr->pgno = sqlite3_value_int(argv[idxNum>>1]);
+ if( pCsr->pgno<1 || pCsr->pgno>pCsr->mxPgno ){
+ pCsr->pgno = 1;
+ pCsr->mxPgno = 0;
+ }else{
+ pCsr->mxPgno = pCsr->pgno;
}
- p->zBuf[p->nUsed++] = c;
+ }else{
+ assert( pCsr->pgno==1 );
}
- p->zBuf[p->nUsed++] = '"';
- assert( p->nUsed<p->nAlloc );
+ if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1);
+ rc = sqlite3PagerGet(pCsr->pPager, 1, &pCsr->pPage1, 0);
+ return rc;
}
-/*
-** Append a function parameter value to the JSON string under
-** construction.
-*/
-static void jsonAppendValue(
- JsonString *p, /* Append to this JSON string */
- sqlite3_value *pValue /* Value to append */
+static int dbpageColumn(
+ sqlite3_vtab_cursor *pCursor,
+ sqlite3_context *ctx,
+ int i
){
- switch( sqlite3_value_type(pValue) ){
- case SQLITE_NULL: {
- jsonAppendRaw(p, "null", 4);
- break;
- }
- case SQLITE_INTEGER:
- case SQLITE_FLOAT: {
- const char *z = (const char*)sqlite3_value_text(pValue);
- u32 n = (u32)sqlite3_value_bytes(pValue);
- jsonAppendRaw(p, z, n);
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ int rc = SQLITE_OK;
+ switch( i ){
+ case 0: { /* pgno */
+ sqlite3_result_int(ctx, pCsr->pgno);
break;
}
- case SQLITE_TEXT: {
- const char *z = (const char*)sqlite3_value_text(pValue);
- u32 n = (u32)sqlite3_value_bytes(pValue);
- if( sqlite3_value_subtype(pValue)==JSON_SUBTYPE ){
- jsonAppendRaw(p, z, n);
- }else{
- jsonAppendString(p, z, n);
+ case 1: { /* data */
+ DbPage *pDbPage = 0;
+ rc = sqlite3PagerGet(pCsr->pPager, pCsr->pgno, (DbPage**)&pDbPage, 0);
+ if( rc==SQLITE_OK ){
+ sqlite3_result_blob(ctx, sqlite3PagerGetData(pDbPage), pCsr->szPage,
+ SQLITE_TRANSIENT);
}
+ sqlite3PagerUnref(pDbPage);
break;
}
- default: {
- if( p->bErr==0 ){
- sqlite3_result_error(p->pCtx, "JSON cannot hold BLOB values", -1);
- p->bErr = 1;
- jsonReset(p);
- }
+ default: { /* schema */
+ sqlite3 *db = sqlite3_context_db_handle(ctx);
+ sqlite3_result_text(ctx, db->aDb[pCsr->iDb].zDbSName, -1, SQLITE_STATIC);
break;
}
}
+ return SQLITE_OK;
}
+static int dbpageRowid(sqlite3_vtab_cursor *pCursor, sqlite_int64 *pRowid){
+ DbpageCursor *pCsr = (DbpageCursor *)pCursor;
+ *pRowid = pCsr->pgno;
+ return SQLITE_OK;
+}
-/* Make the JSON in p the result of the SQL function.
+static int dbpageUpdate(
+ sqlite3_vtab *pVtab,
+ int argc,
+ sqlite3_value **argv,
+ sqlite_int64 *pRowid
+){
+ DbpageTable *pTab = (DbpageTable *)pVtab;
+ Pgno pgno;
+ DbPage *pDbPage = 0;
+ int rc = SQLITE_OK;
+ char *zErr = 0;
+ const char *zSchema;
+ int iDb;
+ Btree *pBt;
+ Pager *pPager;
+ int szPage;
+
+ if( argc==1 ){
+ zErr = "cannot delete";
+ goto update_fail;
+ }
+ pgno = sqlite3_value_int(argv[0]);
+ if( (Pgno)sqlite3_value_int(argv[1])!=pgno ){
+ zErr = "cannot insert";
+ goto update_fail;
+ }
+ zSchema = (const char*)sqlite3_value_text(argv[4]);
+ iDb = zSchema ? sqlite3FindDbName(pTab->db, zSchema) : -1;
+ if( iDb<0 ){
+ zErr = "no such schema";
+ goto update_fail;
+ }
+ pBt = pTab->db->aDb[iDb].pBt;
+ if( pgno<1 || pBt==0 || pgno>(int)sqlite3BtreeLastPage(pBt) ){
+ zErr = "bad page number";
+ goto update_fail;
+ }
+ szPage = sqlite3BtreeGetPageSize(pBt);
+ if( sqlite3_value_type(argv[3])!=SQLITE_BLOB
+ || sqlite3_value_bytes(argv[3])!=szPage
+ ){
+ zErr = "bad page value";
+ goto update_fail;
+ }
+ pPager = sqlite3BtreePager(pBt);
+ rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pDbPage, 0);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3PagerWrite(pDbPage);
+ if( rc==SQLITE_OK ){
+ memcpy(sqlite3PagerGetData(pDbPage),
+ sqlite3_value_blob(argv[3]),
+ szPage);
+ }
+ }
+ sqlite3PagerUnref(pDbPage);
+ return rc;
+
+update_fail:
+ sqlite3_free(pVtab->zErrMsg);
+ pVtab->zErrMsg = sqlite3_mprintf("%s", zErr);
+ return SQLITE_ERROR;
+}
+
+/* Since we do not know in advance which database files will be
+** written by the sqlite_dbpage virtual table, start a write transaction
+** on them all.
*/
-static void jsonResult(JsonString *p){
- if( p->bErr==0 ){
- sqlite3_result_text64(p->pCtx, p->zBuf, p->nUsed,
- p->bStatic ? SQLITE_TRANSIENT : sqlite3_free,
- SQLITE_UTF8);
- jsonZero(p);
+static int dbpageBegin(sqlite3_vtab *pVtab){
+ DbpageTable *pTab = (DbpageTable *)pVtab;
+ sqlite3 *db = pTab->db;
+ int i;
+ for(i=0; i<db->nDb; i++){
+ Btree *pBt = db->aDb[i].pBt;
+ if( pBt ) sqlite3BtreeBeginTrans(pBt, 1);
}
- assert( p->bStatic );
+ return SQLITE_OK;
}
-/**************************************************************************
-** Utility routines for dealing with JsonNode and JsonParse objects
-**************************************************************************/
/*
-** Return the number of consecutive JsonNode slots need to represent
-** the parsed JSON at pNode. The minimum answer is 1. For ARRAY and
-** OBJECT types, the number might be larger.
+** Invoke this routine to register the "dbpage" virtual table module
+*/
+SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){
+ static sqlite3_module dbpage_module = {
+ 0, /* iVersion */
+ dbpageConnect, /* xCreate */
+ dbpageConnect, /* xConnect */
+ dbpageBestIndex, /* xBestIndex */
+ dbpageDisconnect, /* xDisconnect */
+ dbpageDisconnect, /* xDestroy */
+ dbpageOpen, /* xOpen - open a cursor */
+ dbpageClose, /* xClose - close a cursor */
+ dbpageFilter, /* xFilter - configure scan constraints */
+ dbpageNext, /* xNext - advance a cursor */
+ dbpageEof, /* xEof - check for end of scan */
+ dbpageColumn, /* xColumn - read data */
+ dbpageRowid, /* xRowid - read data */
+ dbpageUpdate, /* xUpdate */
+ dbpageBegin, /* xBegin */
+ 0, /* xSync */
+ 0, /* xCommit */
+ 0, /* xRollback */
+ 0, /* xFindMethod */
+ 0, /* xRename */
+ 0, /* xSavepoint */
+ 0, /* xRelease */
+ 0, /* xRollbackTo */
+ };
+ return sqlite3_create_module(db, "sqlite_dbpage", &dbpage_module, 0);
+}
+#elif defined(SQLITE_ENABLE_DBPAGE_VTAB)
+SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ return SQLITE_OK; }
+#endif /* SQLITE_ENABLE_DBSTAT_VTAB */
+
+/************** End of dbpage.c **********************************************/
+/************** Begin file sqlite3session.c **********************************/
+
+#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK)
+/* #include "sqlite3session.h" */
+/* #include <assert.h> */
+/* #include <string.h> */
+
+#ifndef SQLITE_AMALGAMATION
+/* # include "sqliteInt.h" */
+/* # include "vdbeInt.h" */
+#endif
+
+typedef struct SessionTable SessionTable;
+typedef struct SessionChange SessionChange;
+typedef struct SessionBuffer SessionBuffer;
+typedef struct SessionInput SessionInput;
+
+/*
+** Minimum chunk size used by streaming versions of functions.
+*/
+#ifndef SESSIONS_STRM_CHUNK_SIZE
+# ifdef SQLITE_TEST
+# define SESSIONS_STRM_CHUNK_SIZE 64
+# else
+# define SESSIONS_STRM_CHUNK_SIZE 1024
+# endif
+#endif
+
+typedef struct SessionHook SessionHook;
+struct SessionHook {
+ void *pCtx;
+ int (*xOld)(void*,int,sqlite3_value**);
+ int (*xNew)(void*,int,sqlite3_value**);
+ int (*xCount)(void*);
+ int (*xDepth)(void*);
+};
+
+/*
+** Session handle structure.
+*/
+struct sqlite3_session {
+ sqlite3 *db; /* Database handle session is attached to */
+ char *zDb; /* Name of database session is attached to */
+ int bEnable; /* True if currently recording */
+ int bIndirect; /* True if all changes are indirect */
+ int bAutoAttach; /* True to auto-attach tables */
+ int rc; /* Non-zero if an error has occurred */
+ void *pFilterCtx; /* First argument to pass to xTableFilter */
+ int (*xTableFilter)(void *pCtx, const char *zTab);
+ sqlite3_value *pZeroBlob; /* Value containing X'' */
+ sqlite3_session *pNext; /* Next session object on same db. */
+ SessionTable *pTable; /* List of attached tables */
+ SessionHook hook; /* APIs to grab new and old data with */
+};
+
+/*
+** Instances of this structure are used to build strings or binary records.
+*/
+struct SessionBuffer {
+ u8 *aBuf; /* Pointer to changeset buffer */
+ int nBuf; /* Size of buffer aBuf */
+ int nAlloc; /* Size of allocation containing aBuf */
+};
+
+/*
+** An object of this type is used internally as an abstraction for
+** input data. Input data may be supplied either as a single large buffer
+** (e.g. sqlite3changeset_start()) or using a stream function (e.g.
+** sqlite3changeset_start_strm()).
+*/
+struct SessionInput {
+ int bNoDiscard; /* If true, discard no data */
+ int iCurrent; /* Offset in aData[] of current change */
+ int iNext; /* Offset in aData[] of next change */
+ u8 *aData; /* Pointer to buffer containing changeset */
+ int nData; /* Number of bytes in aData */
+
+ SessionBuffer buf; /* Current read buffer */
+ int (*xInput)(void*, void*, int*); /* Input stream call (or NULL) */
+ void *pIn; /* First argument to xInput */
+ int bEof; /* Set to true after xInput finished */
+};
+
+/*
+** Structure for changeset iterators.
+*/
+struct sqlite3_changeset_iter {
+ SessionInput in; /* Input buffer or stream */
+ SessionBuffer tblhdr; /* Buffer to hold apValue/zTab/abPK/ */
+ int bPatchset; /* True if this is a patchset */
+ int rc; /* Iterator error code */
+ sqlite3_stmt *pConflict; /* Points to conflicting row, if any */
+ char *zTab; /* Current table */
+ int nCol; /* Number of columns in zTab */
+ int op; /* Current operation */
+ int bIndirect; /* True if current change was indirect */
+ u8 *abPK; /* Primary key array */
+ sqlite3_value **apValue; /* old.* and new.* values */
+};
+
+/*
+** Each session object maintains a set of the following structures, one
+** for each table the session object is monitoring. The structures are
+** stored in a linked list starting at sqlite3_session.pTable.
**
-** Appended elements are not counted. The value returned is the number
-** by which the JsonNode counter should increment in order to go to the
-** next peer value.
+** The keys of the SessionTable.aChange[] hash table are all rows that have
+** been modified in any way since the session object was attached to the
+** table.
+**
+** The data associated with each hash-table entry is a structure containing
+** a subset of the initial values that the modified row contained at the
+** start of the session. Or no initial values if the row was inserted.
+*/
+struct SessionTable {
+ SessionTable *pNext;
+ char *zName; /* Local name of table */
+ int nCol; /* Number of columns in table zName */
+ int bStat1; /* True if this is sqlite_stat1 */
+ const char **azCol; /* Column names */
+ u8 *abPK; /* Array of primary key flags */
+ int nEntry; /* Total number of entries in hash table */
+ int nChange; /* Size of apChange[] array */
+ SessionChange **apChange; /* Hash table buckets */
+};
+
+/*
+** RECORD FORMAT:
+**
+** The following record format is similar to (but not compatible with) that
+** used in SQLite database files. This format is used as part of the
+** change-set binary format, and so must be architecture independent.
+**
+** Unlike the SQLite database record format, each field is self-contained -
+** there is no separation of header and data. Each field begins with a
+** single byte describing its type, as follows:
+**
+** 0x00: Undefined value.
+** 0x01: Integer value.
+** 0x02: Real value.
+** 0x03: Text value.
+** 0x04: Blob value.
+** 0x05: SQL NULL value.
+**
+** Note that the above match the definitions of SQLITE_INTEGER, SQLITE_TEXT
+** and so on in sqlite3.h. For undefined and NULL values, the field consists
+** only of the single type byte. For other types of values, the type byte
+** is followed by:
+**
+** Text values:
+** A varint containing the number of bytes in the value (encoded using
+** UTF-8). Followed by a buffer containing the UTF-8 representation
+** of the text value. There is no nul terminator.
+**
+** Blob values:
+** A varint containing the number of bytes in the value, followed by
+** a buffer containing the value itself.
+**
+** Integer values:
+** An 8-byte big-endian integer value.
+**
+** Real values:
+** An 8-byte big-endian IEEE 754-2008 real value.
+**
+** Varint values are encoded in the same way as varints in the SQLite
+** record format.
+**
+** CHANGESET FORMAT:
+**
+** A changeset is a collection of DELETE, UPDATE and INSERT operations on
+** one or more tables. Operations on a single table are grouped together,
+** but may occur in any order (i.e. deletes, updates and inserts are all
+** mixed together).
+**
+** Each group of changes begins with a table header:
+**
+** 1 byte: Constant 0x54 (capital 'T')
+** Varint: Number of columns in the table.
+** nCol bytes: 0x01 for PK columns, 0x00 otherwise.
+** N bytes: Unqualified table name (encoded using UTF-8). Nul-terminated.
+**
+** Followed by one or more changes to the table.
+**
+** 1 byte: Either SQLITE_INSERT (0x12), UPDATE (0x17) or DELETE (0x09).
+** 1 byte: The "indirect-change" flag.
+** old.* record: (delete and update only)
+** new.* record: (insert and update only)
+**
+** The "old.*" and "new.*" records, if present, are N field records in the
+** format described above under "RECORD FORMAT", where N is the number of
+** columns in the table. The i'th field of each record is associated with
+** the i'th column of the table, counting from left to right in the order
+** in which columns were declared in the CREATE TABLE statement.
+**
+** The new.* record that is part of each INSERT change contains the values
+** that make up the new row. Similarly, the old.* record that is part of each
+** DELETE change contains the values that made up the row that was deleted
+** from the database. In the changeset format, the records that are part
+** of INSERT or DELETE changes never contain any undefined (type byte 0x00)
+** fields.
+**
+** Within the old.* record associated with an UPDATE change, all fields
+** associated with table columns that are not PRIMARY KEY columns and are
+** not modified by the UPDATE change are set to "undefined". Other fields
+** are set to the values that made up the row before the UPDATE that the
+** change records took place. Within the new.* record, fields associated
+** with table columns modified by the UPDATE change contain the new
+** values. Fields associated with table columns that are not modified
+** are set to "undefined".
+**
+** PATCHSET FORMAT:
+**
+** A patchset is also a collection of changes. It is similar to a changeset,
+** but leaves undefined those fields that are not useful if no conflict
+** resolution is required when applying the changeset.
+**
+** Each group of changes begins with a table header:
+**
+** 1 byte: Constant 0x50 (capital 'P')
+** Varint: Number of columns in the table.
+** nCol bytes: 0x01 for PK columns, 0x00 otherwise.
+** N bytes: Unqualified table name (encoded using UTF-8). Nul-terminated.
+**
+** Followed by one or more changes to the table.
+**
+** 1 byte: Either SQLITE_INSERT (0x12), UPDATE (0x17) or DELETE (0x09).
+** 1 byte: The "indirect-change" flag.
+** single record: (PK fields for DELETE, PK and modified fields for UPDATE,
+** full record for INSERT).
+**
+** As in the changeset format, each field of the single record that is part
+** of a patchset change is associated with the correspondingly positioned
+** table column, counting from left to right within the CREATE TABLE
+** statement.
+**
+** For a DELETE change, all fields within the record except those associated
+** with PRIMARY KEY columns are omitted. The PRIMARY KEY fields contain the
+** values identifying the row to delete.
+**
+** For an UPDATE change, all fields except those associated with PRIMARY KEY
+** columns and columns that are modified by the UPDATE are set to "undefined".
+** PRIMARY KEY fields contain the values identifying the table row to update,
+** and fields associated with modified columns contain the new column values.
+**
+** The records associated with INSERT changes are in the same format as for
+** changesets. It is not possible for a record associated with an INSERT
+** change to contain a field set to "undefined".
*/
-static u32 jsonNodeSize(JsonNode *pNode){
- return pNode->eType>=JSON_ARRAY ? pNode->n+1 : 1;
+
+/*
+** For each row modified during a session, there exists a single instance of
+** this structure stored in a SessionTable.aChange[] hash table.
+*/
+struct SessionChange {
+ int op; /* One of UPDATE, DELETE, INSERT */
+ int bIndirect; /* True if this change is "indirect" */
+ int nRecord; /* Number of bytes in buffer aRecord[] */
+ u8 *aRecord; /* Buffer containing old.* record */
+ SessionChange *pNext; /* For hash-table collisions */
+};
+
+/*
+** Write a varint with value iVal into the buffer at aBuf. Return the
+** number of bytes written.
+*/
+static int sessionVarintPut(u8 *aBuf, int iVal){
+ return putVarint32(aBuf, iVal);
}
/*
-** Reclaim all memory allocated by a JsonParse object. But do not
-** delete the JsonParse object itself.
+** Return the number of bytes required to store value iVal as a varint.
*/
-static void jsonParseReset(JsonParse *pParse){
- sqlite3_free(pParse->aNode);
- pParse->aNode = 0;
- pParse->nNode = 0;
- pParse->nAlloc = 0;
- sqlite3_free(pParse->aUp);
- pParse->aUp = 0;
+static int sessionVarintLen(int iVal){
+ return sqlite3VarintLen(iVal);
}
/*
-** Convert the JsonNode pNode into a pure JSON string and
-** append to pOut. Subsubstructure is also included. Return
-** the number of JsonNode objects that are encoded.
+** Read a varint value from aBuf[] into *piVal. Return the number of
+** bytes read.
*/
-static void jsonRenderNode(
- JsonNode *pNode, /* The node to render */
- JsonString *pOut, /* Write JSON here */
- sqlite3_value **aReplace /* Replacement values */
-){
- switch( pNode->eType ){
- default: {
- assert( pNode->eType==JSON_NULL );
- jsonAppendRaw(pOut, "null", 4);
- break;
- }
- case JSON_TRUE: {
- jsonAppendRaw(pOut, "true", 4);
- break;
- }
- case JSON_FALSE: {
- jsonAppendRaw(pOut, "false", 5);
- break;
- }
- case JSON_STRING: {
- if( pNode->jnFlags & JNODE_RAW ){
- jsonAppendString(pOut, pNode->u.zJContent, pNode->n);
- break;
- }
- /* Fall through into the next case */
- }
- case JSON_REAL:
- case JSON_INT: {
- jsonAppendRaw(pOut, pNode->u.zJContent, pNode->n);
- break;
- }
- case JSON_ARRAY: {
- u32 j = 1;
- jsonAppendChar(pOut, '[');
- for(;;){
- while( j<=pNode->n ){
- if( pNode[j].jnFlags & (JNODE_REMOVE|JNODE_REPLACE) ){
- if( pNode[j].jnFlags & JNODE_REPLACE ){
- jsonAppendSeparator(pOut);
- jsonAppendValue(pOut, aReplace[pNode[j].iVal]);
- }
- }else{
- jsonAppendSeparator(pOut);
- jsonRenderNode(&pNode[j], pOut, aReplace);
- }
- j += jsonNodeSize(&pNode[j]);
- }
- if( (pNode->jnFlags & JNODE_APPEND)==0 ) break;
- pNode = &pNode[pNode->u.iAppend];
- j = 1;
- }
- jsonAppendChar(pOut, ']');
- break;
- }
- case JSON_OBJECT: {
- u32 j = 1;
- jsonAppendChar(pOut, '{');
- for(;;){
- while( j<=pNode->n ){
- if( (pNode[j+1].jnFlags & JNODE_REMOVE)==0 ){
- jsonAppendSeparator(pOut);
- jsonRenderNode(&pNode[j], pOut, aReplace);
- jsonAppendChar(pOut, ':');
- if( pNode[j+1].jnFlags & JNODE_REPLACE ){
- jsonAppendValue(pOut, aReplace[pNode[j+1].iVal]);
- }else{
- jsonRenderNode(&pNode[j+1], pOut, aReplace);
- }
- }
- j += 1 + jsonNodeSize(&pNode[j+1]);
- }
- if( (pNode->jnFlags & JNODE_APPEND)==0 ) break;
- pNode = &pNode[pNode->u.iAppend];
- j = 1;
- }
- jsonAppendChar(pOut, '}');
- break;
- }
- }
+static int sessionVarintGet(u8 *aBuf, int *piVal){
+ return getVarint32(aBuf, *piVal);
}
+/* Load an unaligned and unsigned 32-bit integer */
+#define SESSION_UINT32(x) (((u32)(x)[0]<<24)|((x)[1]<<16)|((x)[2]<<8)|(x)[3])
+
/*
-** Return a JsonNode and all its descendents as a JSON string.
+** Read a 64-bit big-endian integer value from buffer aRec[]. Return
+** the value read.
*/
-static void jsonReturnJson(
- JsonNode *pNode, /* Node to return */
- sqlite3_context *pCtx, /* Return value for this function */
- sqlite3_value **aReplace /* Array of replacement values */
-){
- JsonString s;
- jsonInit(&s, pCtx);
- jsonRenderNode(pNode, &s, aReplace);
- jsonResult(&s);
- sqlite3_result_subtype(pCtx, JSON_SUBTYPE);
+static sqlite3_int64 sessionGetI64(u8 *aRec){
+ u64 x = SESSION_UINT32(aRec);
+ u32 y = SESSION_UINT32(aRec+4);
+ x = (x<<32) + y;
+ return (sqlite3_int64)x;
}
/*
-** Make the JsonNode the return value of the function.
+** Write a 64-bit big-endian integer value to the buffer aBuf[].
*/
-static void jsonReturn(
- JsonNode *pNode, /* Node to return */
- sqlite3_context *pCtx, /* Return value for this function */
- sqlite3_value **aReplace /* Array of replacement values */
+static void sessionPutI64(u8 *aBuf, sqlite3_int64 i){
+ aBuf[0] = (i>>56) & 0xFF;
+ aBuf[1] = (i>>48) & 0xFF;
+ aBuf[2] = (i>>40) & 0xFF;
+ aBuf[3] = (i>>32) & 0xFF;
+ aBuf[4] = (i>>24) & 0xFF;
+ aBuf[5] = (i>>16) & 0xFF;
+ aBuf[6] = (i>> 8) & 0xFF;
+ aBuf[7] = (i>> 0) & 0xFF;
+}
+
+/*
+** This function is used to serialize the contents of value pValue (see
+** comment titled "RECORD FORMAT" above).
+**
+** If it is non-NULL, the serialized form of the value is written to
+** buffer aBuf. *pnWrite is set to the number of bytes written before
+** returning. Or, if aBuf is NULL, the only thing this function does is
+** set *pnWrite.
+**
+** If no error occurs, SQLITE_OK is returned. Or, if an OOM error occurs
+** within a call to sqlite3_value_text() (may fail if the db is utf-16))
+** SQLITE_NOMEM is returned.
+*/
+static int sessionSerializeValue(
+ u8 *aBuf, /* If non-NULL, write serialized value here */
+ sqlite3_value *pValue, /* Value to serialize */
+ int *pnWrite /* IN/OUT: Increment by bytes written */
){
- switch( pNode->eType ){
- default: {
- assert( pNode->eType==JSON_NULL );
- sqlite3_result_null(pCtx);
- break;
- }
- case JSON_TRUE: {
- sqlite3_result_int(pCtx, 1);
- break;
- }
- case JSON_FALSE: {
- sqlite3_result_int(pCtx, 0);
- break;
- }
- case JSON_INT: {
- sqlite3_int64 i = 0;
- const char *z = pNode->u.zJContent;
- if( z[0]=='-' ){ z++; }
- while( z[0]>='0' && z[0]<='9' ){
- unsigned v = *(z++) - '0';
- if( i>=LARGEST_INT64/10 ){
- if( i>LARGEST_INT64/10 ) goto int_as_real;
- if( z[0]>='0' && z[0]<='9' ) goto int_as_real;
- if( v==9 ) goto int_as_real;
- if( v==8 ){
- if( pNode->u.zJContent[0]=='-' ){
- sqlite3_result_int64(pCtx, SMALLEST_INT64);
- goto int_done;
- }else{
- goto int_as_real;
- }
+ int nByte; /* Size of serialized value in bytes */
+
+ if( pValue ){
+ int eType; /* Value type (SQLITE_NULL, TEXT etc.) */
+
+ eType = sqlite3_value_type(pValue);
+ if( aBuf ) aBuf[0] = eType;
+
+ switch( eType ){
+ case SQLITE_NULL:
+ nByte = 1;
+ break;
+
+ case SQLITE_INTEGER:
+ case SQLITE_FLOAT:
+ if( aBuf ){
+ /* TODO: SQLite does something special to deal with mixed-endian
+ ** floating point values (e.g. ARM7). This code probably should
+ ** too. */
+ u64 i;
+ if( eType==SQLITE_INTEGER ){
+ i = (u64)sqlite3_value_int64(pValue);
+ }else{
+ double r;
+ assert( sizeof(double)==8 && sizeof(u64)==8 );
+ r = sqlite3_value_double(pValue);
+ memcpy(&i, &r, 8);
}
+ sessionPutI64(&aBuf[1], i);
}
- i = i*10 + v;
- }
- if( pNode->u.zJContent[0]=='-' ){ i = -i; }
- sqlite3_result_int64(pCtx, i);
- int_done:
- break;
- int_as_real: /* fall through to real */;
- }
- case JSON_REAL: {
- double r = strtod(pNode->u.zJContent, 0);
- sqlite3_result_double(pCtx, r);
- break;
- }
- case JSON_STRING: {
-#if 0 /* Never happens because JNODE_RAW is only set by json_set(),
- ** json_insert() and json_replace() and those routines do not
- ** call jsonReturn() */
- if( pNode->jnFlags & JNODE_RAW ){
- sqlite3_result_text(pCtx, pNode->u.zJContent, pNode->n,
- SQLITE_TRANSIENT);
- }else
-#endif
- assert( (pNode->jnFlags & JNODE_RAW)==0 );
- if( (pNode->jnFlags & JNODE_ESCAPE)==0 ){
- /* JSON formatted without any backslash-escapes */
- sqlite3_result_text(pCtx, pNode->u.zJContent+1, pNode->n-2,
- SQLITE_TRANSIENT);
- }else{
- /* Translate JSON formatted string into raw text */
- u32 i;
- u32 n = pNode->n;
- const char *z = pNode->u.zJContent;
- char *zOut;
- u32 j;
- zOut = sqlite3_malloc( n+1 );
- if( zOut==0 ){
- sqlite3_result_error_nomem(pCtx);
- break;
+ nByte = 9;
+ break;
+
+ default: {
+ u8 *z;
+ int n;
+ int nVarint;
+
+ assert( eType==SQLITE_TEXT || eType==SQLITE_BLOB );
+ if( eType==SQLITE_TEXT ){
+ z = (u8 *)sqlite3_value_text(pValue);
+ }else{
+ z = (u8 *)sqlite3_value_blob(pValue);
}
- for(i=1, j=0; i<n-1; i++){
- char c = z[i];
- if( c!='\\' ){
- zOut[j++] = c;
- }else{
- c = z[++i];
- if( c=='u' ){
- u32 v = 0, k;
- for(k=0; k<4 && i<n-2; i++, k++){
- c = z[i+1];
- if( c>='0' && c<='9' ) v = v*16 + c - '0';
- else if( c>='A' && c<='F' ) v = v*16 + c - 'A' + 10;
- else if( c>='a' && c<='f' ) v = v*16 + c - 'a' + 10;
- else break;
- }
- if( v==0 ) break;
- if( v<=0x7f ){
- zOut[j++] = (char)v;
- }else if( v<=0x7ff ){
- zOut[j++] = (char)(0xc0 | (v>>6));
- zOut[j++] = 0x80 | (v&0x3f);
- }else{
- zOut[j++] = (char)(0xe0 | (v>>12));
- zOut[j++] = 0x80 | ((v>>6)&0x3f);
- zOut[j++] = 0x80 | (v&0x3f);
- }
- }else{
- if( c=='b' ){
- c = '\b';
- }else if( c=='f' ){
- c = '\f';
- }else if( c=='n' ){
- c = '\n';
- }else if( c=='r' ){
- c = '\r';
- }else if( c=='t' ){
- c = '\t';
- }
- zOut[j++] = c;
- }
- }
+ n = sqlite3_value_bytes(pValue);
+ if( z==0 && (eType!=SQLITE_BLOB || n>0) ) return SQLITE_NOMEM;
+ nVarint = sessionVarintLen(n);
+
+ if( aBuf ){
+ sessionVarintPut(&aBuf[1], n);
+ if( n ) memcpy(&aBuf[nVarint + 1], z, n);
}
- zOut[j] = 0;
- sqlite3_result_text(pCtx, zOut, j, sqlite3_free);
+
+ nByte = 1 + nVarint + n;
+ break;
}
- break;
- }
- case JSON_ARRAY:
- case JSON_OBJECT: {
- jsonReturnJson(pNode, pCtx, aReplace);
- break;
}
+ }else{
+ nByte = 1;
+ if( aBuf ) aBuf[0] = '\0';
}
+
+ if( pnWrite ) *pnWrite += nByte;
+ return SQLITE_OK;
}
-/* Forward reference */
-static int jsonParseAddNode(JsonParse*,u32,u32,const char*);
/*
-** A macro to hint to the compiler that a function should not be
-** inlined.
+** This macro is used to calculate hash key values for data structures. In
+** order to use this macro, the entire data structure must be represented
+** as a series of unsigned integers. In order to calculate a hash-key value
+** for a data structure represented as three such integers, the macro may
+** then be used as follows:
+**
+** int hash_key_value;
+** hash_key_value = HASH_APPEND(0, <value 1>);
+** hash_key_value = HASH_APPEND(hash_key_value, <value 2>);
+** hash_key_value = HASH_APPEND(hash_key_value, <value 3>);
+**
+** In practice, the data structures this macro is used for are the primary
+** key values of modified rows.
*/
-#if defined(__GNUC__)
-# define JSON_NOINLINE __attribute__((noinline))
-#elif defined(_MSC_VER) && _MSC_VER>=1310
-# define JSON_NOINLINE __declspec(noinline)
-#else
-# define JSON_NOINLINE
-#endif
+#define HASH_APPEND(hash, add) ((hash) << 3) ^ (hash) ^ (unsigned int)(add)
+/*
+** Append the hash of the 64-bit integer passed as the second argument to the
+** hash-key value passed as the first. Return the new hash-key value.
+*/
+static unsigned int sessionHashAppendI64(unsigned int h, i64 i){
+ h = HASH_APPEND(h, i & 0xFFFFFFFF);
+ return HASH_APPEND(h, (i>>32)&0xFFFFFFFF);
+}
-static JSON_NOINLINE int jsonParseAddNodeExpand(
- JsonParse *pParse, /* Append the node to this object */
- u32 eType, /* Node type */
- u32 n, /* Content size or sub-node count */
- const char *zContent /* Content */
-){
- u32 nNew;
- JsonNode *pNew;
- assert( pParse->nNode>=pParse->nAlloc );
- if( pParse->oom ) return -1;
- nNew = pParse->nAlloc*2 + 10;
- pNew = sqlite3_realloc(pParse->aNode, sizeof(JsonNode)*nNew);
- if( pNew==0 ){
- pParse->oom = 1;
- return -1;
- }
- pParse->nAlloc = nNew;
- pParse->aNode = pNew;
- assert( pParse->nNode<pParse->nAlloc );
- return jsonParseAddNode(pParse, eType, n, zContent);
+/*
+** Append the hash of the blob passed via the second and third arguments to
+** the hash-key value passed as the first. Return the new hash-key value.
+*/
+static unsigned int sessionHashAppendBlob(unsigned int h, int n, const u8 *z){
+ int i;
+ for(i=0; i<n; i++) h = HASH_APPEND(h, z[i]);
+ return h;
}
/*
-** Create a new JsonNode instance based on the arguments and append that
-** instance to the JsonParse. Return the index in pParse->aNode[] of the
-** new node, or -1 if a memory allocation fails.
+** Append the hash of the data type passed as the second argument to the
+** hash-key value passed as the first. Return the new hash-key value.
*/
-static int jsonParseAddNode(
- JsonParse *pParse, /* Append the node to this object */
- u32 eType, /* Node type */
- u32 n, /* Content size or sub-node count */
- const char *zContent /* Content */
-){
- JsonNode *p;
- if( pParse->nNode>=pParse->nAlloc ){
- return jsonParseAddNodeExpand(pParse, eType, n, zContent);
- }
- p = &pParse->aNode[pParse->nNode];
- p->eType = (u8)eType;
- p->jnFlags = 0;
- p->iVal = 0;
- p->n = n;
- p->u.zJContent = zContent;
- return pParse->nNode++;
+static unsigned int sessionHashAppendType(unsigned int h, int eType){
+ return HASH_APPEND(h, eType);
}
/*
-** Parse a single JSON value which begins at pParse->zJson[i]. Return the
-** index of the first character past the end of the value parsed.
+** This function may only be called from within a pre-update callback.
+** It calculates a hash based on the primary key values of the old.* or
+** new.* row currently available and, assuming no error occurs, writes it to
+** *piHash before returning. If the primary key contains one or more NULL
+** values, *pbNullPK is set to true before returning.
**
-** Return negative for a syntax error. Special cases: return -2 if the
-** first non-whitespace character is '}' and return -3 if the first
-** non-whitespace character is ']'.
+** If an error occurs, an SQLite error code is returned and the final values
+** of *piHash asn *pbNullPK are undefined. Otherwise, SQLITE_OK is returned
+** and the output variables are set as described above.
*/
-static int jsonParseValue(JsonParse *pParse, u32 i){
- char c;
- u32 j;
- int iThis;
- int x;
- JsonNode *pNode;
- while( safe_isspace(pParse->zJson[i]) ){ i++; }
- if( (c = pParse->zJson[i])=='{' ){
- /* Parse object */
- iThis = jsonParseAddNode(pParse, JSON_OBJECT, 0, 0);
- if( iThis<0 ) return -1;
- for(j=i+1;;j++){
- while( safe_isspace(pParse->zJson[j]) ){ j++; }
- x = jsonParseValue(pParse, j);
- if( x<0 ){
- if( x==(-2) && pParse->nNode==(u32)iThis+1 ) return j+1;
- return -1;
- }
- if( pParse->oom ) return -1;
- pNode = &pParse->aNode[pParse->nNode-1];
- if( pNode->eType!=JSON_STRING ) return -1;
- pNode->jnFlags |= JNODE_LABEL;
- j = x;
- while( safe_isspace(pParse->zJson[j]) ){ j++; }
- if( pParse->zJson[j]!=':' ) return -1;
- j++;
- x = jsonParseValue(pParse, j);
- if( x<0 ) return -1;
- j = x;
- while( safe_isspace(pParse->zJson[j]) ){ j++; }
- c = pParse->zJson[j];
- if( c==',' ) continue;
- if( c!='}' ) return -1;
- break;
- }
- pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1;
- return j+1;
- }else if( c=='[' ){
- /* Parse array */
- iThis = jsonParseAddNode(pParse, JSON_ARRAY, 0, 0);
- if( iThis<0 ) return -1;
- for(j=i+1;;j++){
- while( safe_isspace(pParse->zJson[j]) ){ j++; }
- x = jsonParseValue(pParse, j);
- if( x<0 ){
- if( x==(-3) && pParse->nNode==(u32)iThis+1 ) return j+1;
- return -1;
- }
- j = x;
- while( safe_isspace(pParse->zJson[j]) ){ j++; }
- c = pParse->zJson[j];
- if( c==',' ) continue;
- if( c!=']' ) return -1;
- break;
- }
- pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1;
- return j+1;
- }else if( c=='"' ){
- /* Parse string */
- u8 jnFlags = 0;
- j = i+1;
- for(;;){
- c = pParse->zJson[j];
- if( c==0 ) return -1;
- if( c=='\\' ){
- c = pParse->zJson[++j];
- if( c==0 ) return -1;
- jnFlags = JNODE_ESCAPE;
- }else if( c=='"' ){
- break;
- }
- j++;
- }
- jsonParseAddNode(pParse, JSON_STRING, j+1-i, &pParse->zJson[i]);
- if( !pParse->oom ) pParse->aNode[pParse->nNode-1].jnFlags = jnFlags;
- return j+1;
- }else if( c=='n'
- && strncmp(pParse->zJson+i,"null",4)==0
- && !safe_isalnum(pParse->zJson[i+4]) ){
- jsonParseAddNode(pParse, JSON_NULL, 0, 0);
- return i+4;
- }else if( c=='t'
- && strncmp(pParse->zJson+i,"true",4)==0
- && !safe_isalnum(pParse->zJson[i+4]) ){
- jsonParseAddNode(pParse, JSON_TRUE, 0, 0);
- return i+4;
- }else if( c=='f'
- && strncmp(pParse->zJson+i,"false",5)==0
- && !safe_isalnum(pParse->zJson[i+5]) ){
- jsonParseAddNode(pParse, JSON_FALSE, 0, 0);
- return i+5;
- }else if( c=='-' || (c>='0' && c<='9') ){
- /* Parse number */
- u8 seenDP = 0;
- u8 seenE = 0;
- j = i+1;
- for(;; j++){
- c = pParse->zJson[j];
- if( c>='0' && c<='9' ) continue;
- if( c=='.' ){
- if( pParse->zJson[j-1]=='-' ) return -1;
- if( seenDP ) return -1;
- seenDP = 1;
- continue;
+static int sessionPreupdateHash(
+ sqlite3_session *pSession, /* Session object that owns pTab */
+ SessionTable *pTab, /* Session table handle */
+ int bNew, /* True to hash the new.* PK */
+ int *piHash, /* OUT: Hash value */
+ int *pbNullPK /* OUT: True if there are NULL values in PK */
+){
+ unsigned int h = 0; /* Hash value to return */
+ int i; /* Used to iterate through columns */
+
+ assert( *pbNullPK==0 );
+ assert( pTab->nCol==pSession->hook.xCount(pSession->hook.pCtx) );
+ for(i=0; i<pTab->nCol; i++){
+ if( pTab->abPK[i] ){
+ int rc;
+ int eType;
+ sqlite3_value *pVal;
+
+ if( bNew ){
+ rc = pSession->hook.xNew(pSession->hook.pCtx, i, &pVal);
+ }else{
+ rc = pSession->hook.xOld(pSession->hook.pCtx, i, &pVal);
}
- if( c=='e' || c=='E' ){
- if( pParse->zJson[j-1]<'0' ) return -1;
- if( seenE ) return -1;
- seenDP = seenE = 1;
- c = pParse->zJson[j+1];
- if( c=='+' || c=='-' ){
- j++;
- c = pParse->zJson[j+1];
+ if( rc!=SQLITE_OK ) return rc;
+
+ eType = sqlite3_value_type(pVal);
+ h = sessionHashAppendType(h, eType);
+ if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ i64 iVal;
+ if( eType==SQLITE_INTEGER ){
+ iVal = sqlite3_value_int64(pVal);
+ }else{
+ double rVal = sqlite3_value_double(pVal);
+ assert( sizeof(iVal)==8 && sizeof(rVal)==8 );
+ memcpy(&iVal, &rVal, 8);
}
- if( c<'0' || c>'9' ) return -1;
- continue;
+ h = sessionHashAppendI64(h, iVal);
+ }else if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){
+ const u8 *z;
+ int n;
+ if( eType==SQLITE_TEXT ){
+ z = (const u8 *)sqlite3_value_text(pVal);
+ }else{
+ z = (const u8 *)sqlite3_value_blob(pVal);
+ }
+ n = sqlite3_value_bytes(pVal);
+ if( !z && (eType!=SQLITE_BLOB || n>0) ) return SQLITE_NOMEM;
+ h = sessionHashAppendBlob(h, n, z);
+ }else{
+ assert( eType==SQLITE_NULL );
+ assert( pTab->bStat1==0 || i!=1 );
+ *pbNullPK = 1;
}
- break;
}
- if( pParse->zJson[j-1]<'0' ) return -1;
- jsonParseAddNode(pParse, seenDP ? JSON_REAL : JSON_INT,
- j - i, &pParse->zJson[i]);
- return j;
- }else if( c=='}' ){
- return -2; /* End of {...} */
- }else if( c==']' ){
- return -3; /* End of [...] */
- }else if( c==0 ){
- return 0; /* End of file */
- }else{
- return -1; /* Syntax error */
}
+
+ *piHash = (h % pTab->nChange);
+ return SQLITE_OK;
}
/*
-** Parse a complete JSON string. Return 0 on success or non-zero if there
-** are any errors. If an error occurs, free all memory associated with
-** pParse.
+** The buffer that the argument points to contains a serialized SQL value.
+** Return the number of bytes of space occupied by the value (including
+** the type byte).
+*/
+static int sessionSerialLen(u8 *a){
+ int e = *a;
+ int n;
+ if( e==0 || e==0xFF ) return 1;
+ if( e==SQLITE_NULL ) return 1;
+ if( e==SQLITE_INTEGER || e==SQLITE_FLOAT ) return 9;
+ return sessionVarintGet(&a[1], &n) + 1 + n;
+}
+
+/*
+** Based on the primary key values stored in change aRecord, calculate a
+** hash key. Assume the has table has nBucket buckets. The hash keys
+** calculated by this function are compatible with those calculated by
+** sessionPreupdateHash().
**
-** pParse is uninitialized when this routine is called.
+** The bPkOnly argument is non-zero if the record at aRecord[] is from
+** a patchset DELETE. In this case the non-PK fields are omitted entirely.
*/
-static int jsonParse(
- JsonParse *pParse, /* Initialize and fill this JsonParse object */
- sqlite3_context *pCtx, /* Report errors here */
- const char *zJson /* Input JSON text to be parsed */
+static unsigned int sessionChangeHash(
+ SessionTable *pTab, /* Table handle */
+ int bPkOnly, /* Record consists of PK fields only */
+ u8 *aRecord, /* Change record */
+ int nBucket /* Assume this many buckets in hash table */
){
- int i;
- memset(pParse, 0, sizeof(*pParse));
- if( zJson==0 ) return 1;
- pParse->zJson = zJson;
- i = jsonParseValue(pParse, 0);
- if( pParse->oom ) i = -1;
- if( i>0 ){
- while( safe_isspace(zJson[i]) ) i++;
- if( zJson[i] ) i = -1;
- }
- if( i<=0 ){
- if( pCtx!=0 ){
- if( pParse->oom ){
- sqlite3_result_error_nomem(pCtx);
+ unsigned int h = 0; /* Value to return */
+ int i; /* Used to iterate through columns */
+ u8 *a = aRecord; /* Used to iterate through change record */
+
+ for(i=0; i<pTab->nCol; i++){
+ int eType = *a;
+ int isPK = pTab->abPK[i];
+ if( bPkOnly && isPK==0 ) continue;
+
+ /* It is not possible for eType to be SQLITE_NULL here. The session
+ ** module does not record changes for rows with NULL values stored in
+ ** primary key columns. */
+ assert( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT
+ || eType==SQLITE_TEXT || eType==SQLITE_BLOB
+ || eType==SQLITE_NULL || eType==0
+ );
+ assert( !isPK || (eType!=0 && eType!=SQLITE_NULL) );
+
+ if( isPK ){
+ a++;
+ h = sessionHashAppendType(h, eType);
+ if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ h = sessionHashAppendI64(h, sessionGetI64(a));
+ a += 8;
}else{
- sqlite3_result_error(pCtx, "malformed JSON", -1);
+ int n;
+ a += sessionVarintGet(a, &n);
+ h = sessionHashAppendBlob(h, n, a);
+ a += n;
}
+ }else{
+ a += sessionSerialLen(a);
}
- jsonParseReset(pParse);
- return 1;
}
- return 0;
+ return (h % nBucket);
}
-/* Mark node i of pParse as being a child of iParent. Call recursively
-** to fill in all the descendants of node i.
+/*
+** Arguments aLeft and aRight are pointers to change records for table pTab.
+** This function returns true if the two records apply to the same row (i.e.
+** have the same values stored in the primary key columns), or false
+** otherwise.
*/
-static void jsonParseFillInParentage(JsonParse *pParse, u32 i, u32 iParent){
- JsonNode *pNode = &pParse->aNode[i];
- u32 j;
- pParse->aUp[i] = iParent;
- switch( pNode->eType ){
- case JSON_ARRAY: {
- for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j)){
- jsonParseFillInParentage(pParse, i+j, i);
- }
- break;
- }
- case JSON_OBJECT: {
- for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j+1)+1){
- pParse->aUp[i+j] = i;
- jsonParseFillInParentage(pParse, i+j+1, i);
+static int sessionChangeEqual(
+ SessionTable *pTab, /* Table used for PK definition */
+ int bLeftPkOnly, /* True if aLeft[] contains PK fields only */
+ u8 *aLeft, /* Change record */
+ int bRightPkOnly, /* True if aRight[] contains PK fields only */
+ u8 *aRight /* Change record */
+){
+ u8 *a1 = aLeft; /* Cursor to iterate through aLeft */
+ u8 *a2 = aRight; /* Cursor to iterate through aRight */
+ int iCol; /* Used to iterate through table columns */
+
+ for(iCol=0; iCol<pTab->nCol; iCol++){
+ if( pTab->abPK[iCol] ){
+ int n1 = sessionSerialLen(a1);
+ int n2 = sessionSerialLen(a2);
+
+ if( n1!=n2 || memcmp(a1, a2, n1) ){
+ return 0;
}
- break;
- }
- default: {
- break;
+ a1 += n1;
+ a2 += n2;
+ }else{
+ if( bLeftPkOnly==0 ) a1 += sessionSerialLen(a1);
+ if( bRightPkOnly==0 ) a2 += sessionSerialLen(a2);
}
}
+
+ return 1;
}
/*
-** Compute the parentage of all nodes in a completed parse.
+** Arguments aLeft and aRight both point to buffers containing change
+** records with nCol columns. This function "merges" the two records into
+** a single records which is written to the buffer at *paOut. *paOut is
+** then set to point to one byte after the last byte written before
+** returning.
+**
+** The merging of records is done as follows: For each column, if the
+** aRight record contains a value for the column, copy the value from
+** their. Otherwise, if aLeft contains a value, copy it. If neither
+** record contains a value for a given column, then neither does the
+** output record.
*/
-static int jsonParseFindParents(JsonParse *pParse){
- u32 *aUp;
- assert( pParse->aUp==0 );
- aUp = pParse->aUp = sqlite3_malloc( sizeof(u32)*pParse->nNode );
- if( aUp==0 ){
- pParse->oom = 1;
- return SQLITE_NOMEM;
+static void sessionMergeRecord(
+ u8 **paOut,
+ int nCol,
+ u8 *aLeft,
+ u8 *aRight
+){
+ u8 *a1 = aLeft; /* Cursor used to iterate through aLeft */
+ u8 *a2 = aRight; /* Cursor used to iterate through aRight */
+ u8 *aOut = *paOut; /* Output cursor */
+ int iCol; /* Used to iterate from 0 to nCol */
+
+ for(iCol=0; iCol<nCol; iCol++){
+ int n1 = sessionSerialLen(a1);
+ int n2 = sessionSerialLen(a2);
+ if( *a2 ){
+ memcpy(aOut, a2, n2);
+ aOut += n2;
+ }else{
+ memcpy(aOut, a1, n1);
+ aOut += n1;
+ }
+ a1 += n1;
+ a2 += n2;
}
- jsonParseFillInParentage(pParse, 0, 0);
- return SQLITE_OK;
+
+ *paOut = aOut;
}
/*
-** Compare the OBJECT label at pNode against zKey,nKey. Return true on
-** a match.
+** This is a helper function used by sessionMergeUpdate().
+**
+** When this function is called, both *paOne and *paTwo point to a value
+** within a change record. Before it returns, both have been advanced so
+** as to point to the next value in the record.
+**
+** If, when this function is called, *paTwo points to a valid value (i.e.
+** *paTwo[0] is not 0x00 - the "no value" placeholder), a copy of the *paTwo
+** pointer is returned and *pnVal is set to the number of bytes in the
+** serialized value. Otherwise, a copy of *paOne is returned and *pnVal
+** set to the number of bytes in the value at *paOne. If *paOne points
+** to the "no value" placeholder, *pnVal is set to 1. In other words:
+**
+** if( *paTwo is valid ) return *paTwo;
+** return *paOne;
+**
*/
-static int jsonLabelCompare(JsonNode *pNode, const char *zKey, u32 nKey){
- if( pNode->jnFlags & JNODE_RAW ){
- if( pNode->n!=nKey ) return 0;
+static u8 *sessionMergeValue(
+ u8 **paOne, /* IN/OUT: Left-hand buffer pointer */
+ u8 **paTwo, /* IN/OUT: Right-hand buffer pointer */
+ int *pnVal /* OUT: Bytes in returned value */
+){
+ u8 *a1 = *paOne;
+ u8 *a2 = *paTwo;
+ u8 *pRet = 0;
+ int n1;
+
+ assert( a1 );
+ if( a2 ){
+ int n2 = sessionSerialLen(a2);
+ if( *a2 ){
+ *pnVal = n2;
+ pRet = a2;
+ }
+ *paTwo = &a2[n2];
+ }
+
+ n1 = sessionSerialLen(a1);
+ if( pRet==0 ){
+ *pnVal = n1;
+ pRet = a1;
+ }
+ *paOne = &a1[n1];
+
+ return pRet;
+}
+
+/*
+** This function is used by changeset_concat() to merge two UPDATE changes
+** on the same row.
+*/
+static int sessionMergeUpdate(
+ u8 **paOut, /* IN/OUT: Pointer to output buffer */
+ SessionTable *pTab, /* Table change pertains to */
+ int bPatchset, /* True if records are patchset records */
+ u8 *aOldRecord1, /* old.* record for first change */
+ u8 *aOldRecord2, /* old.* record for second change */
+ u8 *aNewRecord1, /* new.* record for first change */
+ u8 *aNewRecord2 /* new.* record for second change */
+){
+ u8 *aOld1 = aOldRecord1;
+ u8 *aOld2 = aOldRecord2;
+ u8 *aNew1 = aNewRecord1;
+ u8 *aNew2 = aNewRecord2;
+
+ u8 *aOut = *paOut;
+ int i;
+
+ if( bPatchset==0 ){
+ int bRequired = 0;
+
+ assert( aOldRecord1 && aNewRecord1 );
+
+ /* Write the old.* vector first. */
+ for(i=0; i<pTab->nCol; i++){
+ int nOld;
+ u8 *aOld;
+ int nNew;
+ u8 *aNew;
+
+ aOld = sessionMergeValue(&aOld1, &aOld2, &nOld);
+ aNew = sessionMergeValue(&aNew1, &aNew2, &nNew);
+ if( pTab->abPK[i] || nOld!=nNew || memcmp(aOld, aNew, nNew) ){
+ if( pTab->abPK[i]==0 ) bRequired = 1;
+ memcpy(aOut, aOld, nOld);
+ aOut += nOld;
+ }else{
+ *(aOut++) = '\0';
+ }
+ }
+
+ if( !bRequired ) return 0;
+ }
+
+ /* Write the new.* vector */
+ aOld1 = aOldRecord1;
+ aOld2 = aOldRecord2;
+ aNew1 = aNewRecord1;
+ aNew2 = aNewRecord2;
+ for(i=0; i<pTab->nCol; i++){
+ int nOld;
+ u8 *aOld;
+ int nNew;
+ u8 *aNew;
+
+ aOld = sessionMergeValue(&aOld1, &aOld2, &nOld);
+ aNew = sessionMergeValue(&aNew1, &aNew2, &nNew);
+ if( bPatchset==0
+ && (pTab->abPK[i] || (nOld==nNew && 0==memcmp(aOld, aNew, nNew)))
+ ){
+ *(aOut++) = '\0';
+ }else{
+ memcpy(aOut, aNew, nNew);
+ aOut += nNew;
+ }
+ }
+
+ *paOut = aOut;
+ return 1;
+}
+
+/*
+** This function is only called from within a pre-update-hook callback.
+** It determines if the current pre-update-hook change affects the same row
+** as the change stored in argument pChange. If so, it returns true. Otherwise
+** if the pre-update-hook does not affect the same row as pChange, it returns
+** false.
+*/
+static int sessionPreupdateEqual(
+ sqlite3_session *pSession, /* Session object that owns SessionTable */
+ SessionTable *pTab, /* Table associated with change */
+ SessionChange *pChange, /* Change to compare to */
+ int op /* Current pre-update operation */
+){
+ int iCol; /* Used to iterate through columns */
+ u8 *a = pChange->aRecord; /* Cursor used to scan change record */
+
+ assert( op==SQLITE_INSERT || op==SQLITE_UPDATE || op==SQLITE_DELETE );
+ for(iCol=0; iCol<pTab->nCol; iCol++){
+ if( !pTab->abPK[iCol] ){
+ a += sessionSerialLen(a);
+ }else{
+ sqlite3_value *pVal; /* Value returned by preupdate_new/old */
+ int rc; /* Error code from preupdate_new/old */
+ int eType = *a++; /* Type of value from change record */
+
+ /* The following calls to preupdate_new() and preupdate_old() can not
+ ** fail. This is because they cache their return values, and by the
+ ** time control flows to here they have already been called once from
+ ** within sessionPreupdateHash(). The first two asserts below verify
+ ** this (that the method has already been called). */
+ if( op==SQLITE_INSERT ){
+ /* assert( db->pPreUpdate->pNewUnpacked || db->pPreUpdate->aNew ); */
+ rc = pSession->hook.xNew(pSession->hook.pCtx, iCol, &pVal);
+ }else{
+ /* assert( db->pPreUpdate->pUnpacked ); */
+ rc = pSession->hook.xOld(pSession->hook.pCtx, iCol, &pVal);
+ }
+ assert( rc==SQLITE_OK );
+ if( sqlite3_value_type(pVal)!=eType ) return 0;
+
+ /* A SessionChange object never has a NULL value in a PK column */
+ assert( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT
+ || eType==SQLITE_BLOB || eType==SQLITE_TEXT
+ );
+
+ if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ i64 iVal = sessionGetI64(a);
+ a += 8;
+ if( eType==SQLITE_INTEGER ){
+ if( sqlite3_value_int64(pVal)!=iVal ) return 0;
+ }else{
+ double rVal;
+ assert( sizeof(iVal)==8 && sizeof(rVal)==8 );
+ memcpy(&rVal, &iVal, 8);
+ if( sqlite3_value_double(pVal)!=rVal ) return 0;
+ }
+ }else{
+ int n;
+ const u8 *z;
+ a += sessionVarintGet(a, &n);
+ if( sqlite3_value_bytes(pVal)!=n ) return 0;
+ if( eType==SQLITE_TEXT ){
+ z = sqlite3_value_text(pVal);
+ }else{
+ z = sqlite3_value_blob(pVal);
+ }
+ if( n>0 && memcmp(a, z, n) ) return 0;
+ a += n;
+ }
+ }
+ }
+
+ return 1;
+}
+
+/*
+** If required, grow the hash table used to store changes on table pTab
+** (part of the session pSession). If a fatal OOM error occurs, set the
+** session object to failed and return SQLITE_ERROR. Otherwise, return
+** SQLITE_OK.
+**
+** It is possible that a non-fatal OOM error occurs in this function. In
+** that case the hash-table does not grow, but SQLITE_OK is returned anyway.
+** Growing the hash table in this case is a performance optimization only,
+** it is not required for correct operation.
+*/
+static int sessionGrowHash(int bPatchset, SessionTable *pTab){
+ if( pTab->nChange==0 || pTab->nEntry>=(pTab->nChange/2) ){
+ int i;
+ SessionChange **apNew;
+ int nNew = (pTab->nChange ? pTab->nChange : 128) * 2;
+
+ apNew = (SessionChange **)sqlite3_malloc(sizeof(SessionChange *) * nNew);
+ if( apNew==0 ){
+ if( pTab->nChange==0 ){
+ return SQLITE_ERROR;
+ }
+ return SQLITE_OK;
+ }
+ memset(apNew, 0, sizeof(SessionChange *) * nNew);
+
+ for(i=0; i<pTab->nChange; i++){
+ SessionChange *p;
+ SessionChange *pNext;
+ for(p=pTab->apChange[i]; p; p=pNext){
+ int bPkOnly = (p->op==SQLITE_DELETE && bPatchset);
+ int iHash = sessionChangeHash(pTab, bPkOnly, p->aRecord, nNew);
+ pNext = p->pNext;
+ p->pNext = apNew[iHash];
+ apNew[iHash] = p;
+ }
+ }
+
+ sqlite3_free(pTab->apChange);
+ pTab->nChange = nNew;
+ pTab->apChange = apNew;
+ }
+
+ return SQLITE_OK;
+}
+
+/*
+** This function queries the database for the names of the columns of table
+** zThis, in schema zDb.
+**
+** Otherwise, if they are not NULL, variable *pnCol is set to the number
+** of columns in the database table and variable *pzTab is set to point to a
+** nul-terminated copy of the table name. *pazCol (if not NULL) is set to
+** point to an array of pointers to column names. And *pabPK (again, if not
+** NULL) is set to point to an array of booleans - true if the corresponding
+** column is part of the primary key.
+**
+** For example, if the table is declared as:
+**
+** CREATE TABLE tbl1(w, x, y, z, PRIMARY KEY(w, z));
+**
+** Then the four output variables are populated as follows:
+**
+** *pnCol = 4
+** *pzTab = "tbl1"
+** *pazCol = {"w", "x", "y", "z"}
+** *pabPK = {1, 0, 0, 1}
+**
+** All returned buffers are part of the same single allocation, which must
+** be freed using sqlite3_free() by the caller
+*/
+static int sessionTableInfo(
+ sqlite3 *db, /* Database connection */
+ const char *zDb, /* Name of attached database (e.g. "main") */
+ const char *zThis, /* Table name */
+ int *pnCol, /* OUT: number of columns */
+ const char **pzTab, /* OUT: Copy of zThis */
+ const char ***pazCol, /* OUT: Array of column names for table */
+ u8 **pabPK /* OUT: Array of booleans - true for PK col */
+){
+ char *zPragma;
+ sqlite3_stmt *pStmt;
+ int rc;
+ int nByte;
+ int nDbCol = 0;
+ int nThis;
+ int i;
+ u8 *pAlloc = 0;
+ char **azCol = 0;
+ u8 *abPK = 0;
+
+ assert( pazCol && pabPK );
+
+ nThis = sqlite3Strlen30(zThis);
+ if( nThis==12 && 0==sqlite3_stricmp("sqlite_stat1", zThis) ){
+ rc = sqlite3_table_column_metadata(db, zDb, zThis, 0, 0, 0, 0, 0, 0);
+ if( rc==SQLITE_OK ){
+ /* For sqlite_stat1, pretend that (tbl,idx) is the PRIMARY KEY. */
+ zPragma = sqlite3_mprintf(
+ "SELECT 0, 'tbl', '', 0, '', 1 UNION ALL "
+ "SELECT 1, 'idx', '', 0, '', 2 UNION ALL "
+ "SELECT 2, 'stat', '', 0, '', 0"
+ );
+ }else if( rc==SQLITE_ERROR ){
+ zPragma = sqlite3_mprintf("");
+ }else{
+ return rc;
+ }
+ }else{
+ zPragma = sqlite3_mprintf("PRAGMA '%q'.table_info('%q')", zDb, zThis);
+ }
+ if( !zPragma ) return SQLITE_NOMEM;
+
+ rc = sqlite3_prepare_v2(db, zPragma, -1, &pStmt, 0);
+ sqlite3_free(zPragma);
+ if( rc!=SQLITE_OK ) return rc;
+
+ nByte = nThis + 1;
+ while( SQLITE_ROW==sqlite3_step(pStmt) ){
+ nByte += sqlite3_column_bytes(pStmt, 1);
+ nDbCol++;
+ }
+ rc = sqlite3_reset(pStmt);
+
+ if( rc==SQLITE_OK ){
+ nByte += nDbCol * (sizeof(const char *) + sizeof(u8) + 1);
+ pAlloc = sqlite3_malloc(nByte);
+ if( pAlloc==0 ){
+ rc = SQLITE_NOMEM;
+ }
+ }
+ if( rc==SQLITE_OK ){
+ azCol = (char **)pAlloc;
+ pAlloc = (u8 *)&azCol[nDbCol];
+ abPK = (u8 *)pAlloc;
+ pAlloc = &abPK[nDbCol];
+ if( pzTab ){
+ memcpy(pAlloc, zThis, nThis+1);
+ *pzTab = (char *)pAlloc;
+ pAlloc += nThis+1;
+ }
+
+ i = 0;
+ while( SQLITE_ROW==sqlite3_step(pStmt) ){
+ int nName = sqlite3_column_bytes(pStmt, 1);
+ const unsigned char *zName = sqlite3_column_text(pStmt, 1);
+ if( zName==0 ) break;
+ memcpy(pAlloc, zName, nName+1);
+ azCol[i] = (char *)pAlloc;
+ pAlloc += nName+1;
+ abPK[i] = sqlite3_column_int(pStmt, 5);
+ i++;
+ }
+ rc = sqlite3_reset(pStmt);
+
+ }
+
+ /* If successful, populate the output variables. Otherwise, zero them and
+ ** free any allocation made. An error code will be returned in this case.
+ */
+ if( rc==SQLITE_OK ){
+ *pazCol = (const char **)azCol;
+ *pabPK = abPK;
+ *pnCol = nDbCol;
+ }else{
+ *pazCol = 0;
+ *pabPK = 0;
+ *pnCol = 0;
+ if( pzTab ) *pzTab = 0;
+ sqlite3_free(azCol);
+ }
+ sqlite3_finalize(pStmt);
+ return rc;
+}
+
+/*
+** This function is only called from within a pre-update handler for a
+** write to table pTab, part of session pSession. If this is the first
+** write to this table, initalize the SessionTable.nCol, azCol[] and
+** abPK[] arrays accordingly.
+**
+** If an error occurs, an error code is stored in sqlite3_session.rc and
+** non-zero returned. Or, if no error occurs but the table has no primary
+** key, sqlite3_session.rc is left set to SQLITE_OK and non-zero returned to
+** indicate that updates on this table should be ignored. SessionTable.abPK
+** is set to NULL in this case.
+*/
+static int sessionInitTable(sqlite3_session *pSession, SessionTable *pTab){
+ if( pTab->nCol==0 ){
+ u8 *abPK;
+ assert( pTab->azCol==0 || pTab->abPK==0 );
+ pSession->rc = sessionTableInfo(pSession->db, pSession->zDb,
+ pTab->zName, &pTab->nCol, 0, &pTab->azCol, &abPK
+ );
+ if( pSession->rc==SQLITE_OK ){
+ int i;
+ for(i=0; i<pTab->nCol; i++){
+ if( abPK[i] ){
+ pTab->abPK = abPK;
+ break;
+ }
+ }
+ if( 0==sqlite3_stricmp("sqlite_stat1", pTab->zName) ){
+ pTab->bStat1 = 1;
+ }
+ }
+ }
+ return (pSession->rc || pTab->abPK==0);
+}
+
+/*
+** Versions of the four methods in object SessionHook for use with the
+** sqlite_stat1 table. The purpose of this is to substitute a zero-length
+** blob each time a NULL value is read from the "idx" column of the
+** sqlite_stat1 table.
+*/
+typedef struct SessionStat1Ctx SessionStat1Ctx;
+struct SessionStat1Ctx {
+ SessionHook hook;
+ sqlite3_session *pSession;
+};
+static int sessionStat1Old(void *pCtx, int iCol, sqlite3_value **ppVal){
+ SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx;
+ sqlite3_value *pVal = 0;
+ int rc = p->hook.xOld(p->hook.pCtx, iCol, &pVal);
+ if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){
+ pVal = p->pSession->pZeroBlob;
+ }
+ *ppVal = pVal;
+ return rc;
+}
+static int sessionStat1New(void *pCtx, int iCol, sqlite3_value **ppVal){
+ SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx;
+ sqlite3_value *pVal = 0;
+ int rc = p->hook.xNew(p->hook.pCtx, iCol, &pVal);
+ if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){
+ pVal = p->pSession->pZeroBlob;
+ }
+ *ppVal = pVal;
+ return rc;
+}
+static int sessionStat1Count(void *pCtx){
+ SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx;
+ return p->hook.xCount(p->hook.pCtx);
+}
+static int sessionStat1Depth(void *pCtx){
+ SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx;
+ return p->hook.xDepth(p->hook.pCtx);
+}
+
+
+/*
+** This function is only called from with a pre-update-hook reporting a
+** change on table pTab (attached to session pSession). The type of change
+** (UPDATE, INSERT, DELETE) is specified by the first argument.
+**
+** Unless one is already present or an error occurs, an entry is added
+** to the changed-rows hash table associated with table pTab.
+*/
+static void sessionPreupdateOneChange(
+ int op, /* One of SQLITE_UPDATE, INSERT, DELETE */
+ sqlite3_session *pSession, /* Session object pTab is attached to */
+ SessionTable *pTab /* Table that change applies to */
+){
+ int iHash;
+ int bNull = 0;
+ int rc = SQLITE_OK;
+ SessionStat1Ctx stat1 = {0};
+
+ if( pSession->rc ) return;
+
+ /* Load table details if required */
+ if( sessionInitTable(pSession, pTab) ) return;
+
+ /* Check the number of columns in this xPreUpdate call matches the
+ ** number of columns in the table. */
+ if( pTab->nCol!=pSession->hook.xCount(pSession->hook.pCtx) ){
+ pSession->rc = SQLITE_SCHEMA;
+ return;
+ }
+
+ /* Grow the hash table if required */
+ if( sessionGrowHash(0, pTab) ){
+ pSession->rc = SQLITE_NOMEM;
+ return;
+ }
+
+ if( pTab->bStat1 ){
+ stat1.hook = pSession->hook;
+ stat1.pSession = pSession;
+ pSession->hook.pCtx = (void*)&stat1;
+ pSession->hook.xNew = sessionStat1New;
+ pSession->hook.xOld = sessionStat1Old;
+ pSession->hook.xCount = sessionStat1Count;
+ pSession->hook.xDepth = sessionStat1Depth;
+ if( pSession->pZeroBlob==0 ){
+ sqlite3_value *p = sqlite3ValueNew(0);
+ if( p==0 ){
+ rc = SQLITE_NOMEM;
+ goto error_out;
+ }
+ sqlite3ValueSetStr(p, 0, "", 0, SQLITE_STATIC);
+ pSession->pZeroBlob = p;
+ }
+ }
+
+ /* Calculate the hash-key for this change. If the primary key of the row
+ ** includes a NULL value, exit early. Such changes are ignored by the
+ ** session module. */
+ rc = sessionPreupdateHash(pSession, pTab, op==SQLITE_INSERT, &iHash, &bNull);
+ if( rc!=SQLITE_OK ) goto error_out;
+
+ if( bNull==0 ){
+ /* Search the hash table for an existing record for this row. */
+ SessionChange *pC;
+ for(pC=pTab->apChange[iHash]; pC; pC=pC->pNext){
+ if( sessionPreupdateEqual(pSession, pTab, pC, op) ) break;
+ }
+
+ if( pC==0 ){
+ /* Create a new change object containing all the old values (if
+ ** this is an SQLITE_UPDATE or SQLITE_DELETE), or just the PK
+ ** values (if this is an INSERT). */
+ SessionChange *pChange; /* New change object */
+ int nByte; /* Number of bytes to allocate */
+ int i; /* Used to iterate through columns */
+
+ assert( rc==SQLITE_OK );
+ pTab->nEntry++;
+
+ /* Figure out how large an allocation is required */
+ nByte = sizeof(SessionChange);
+ for(i=0; i<pTab->nCol; i++){
+ sqlite3_value *p = 0;
+ if( op!=SQLITE_INSERT ){
+ TESTONLY(int trc = ) pSession->hook.xOld(pSession->hook.pCtx, i, &p);
+ assert( trc==SQLITE_OK );
+ }else if( pTab->abPK[i] ){
+ TESTONLY(int trc = ) pSession->hook.xNew(pSession->hook.pCtx, i, &p);
+ assert( trc==SQLITE_OK );
+ }
+
+ /* This may fail if SQLite value p contains a utf-16 string that must
+ ** be converted to utf-8 and an OOM error occurs while doing so. */
+ rc = sessionSerializeValue(0, p, &nByte);
+ if( rc!=SQLITE_OK ) goto error_out;
+ }
+
+ /* Allocate the change object */
+ pChange = (SessionChange *)sqlite3_malloc(nByte);
+ if( !pChange ){
+ rc = SQLITE_NOMEM;
+ goto error_out;
+ }else{
+ memset(pChange, 0, sizeof(SessionChange));
+ pChange->aRecord = (u8 *)&pChange[1];
+ }
+
+ /* Populate the change object. None of the preupdate_old(),
+ ** preupdate_new() or SerializeValue() calls below may fail as all
+ ** required values and encodings have already been cached in memory.
+ ** It is not possible for an OOM to occur in this block. */
+ nByte = 0;
+ for(i=0; i<pTab->nCol; i++){
+ sqlite3_value *p = 0;
+ if( op!=SQLITE_INSERT ){
+ pSession->hook.xOld(pSession->hook.pCtx, i, &p);
+ }else if( pTab->abPK[i] ){
+ pSession->hook.xNew(pSession->hook.pCtx, i, &p);
+ }
+ sessionSerializeValue(&pChange->aRecord[nByte], p, &nByte);
+ }
+
+ /* Add the change to the hash-table */
+ if( pSession->bIndirect || pSession->hook.xDepth(pSession->hook.pCtx) ){
+ pChange->bIndirect = 1;
+ }
+ pChange->nRecord = nByte;
+ pChange->op = op;
+ pChange->pNext = pTab->apChange[iHash];
+ pTab->apChange[iHash] = pChange;
+
+ }else if( pC->bIndirect ){
+ /* If the existing change is considered "indirect", but this current
+ ** change is "direct", mark the change object as direct. */
+ if( pSession->hook.xDepth(pSession->hook.pCtx)==0
+ && pSession->bIndirect==0
+ ){
+ pC->bIndirect = 0;
+ }
+ }
+ }
+
+ /* If an error has occurred, mark the session object as failed. */
+ error_out:
+ if( pTab->bStat1 ){
+ pSession->hook = stat1.hook;
+ }
+ if( rc!=SQLITE_OK ){
+ pSession->rc = rc;
+ }
+}
+
+static int sessionFindTable(
+ sqlite3_session *pSession,
+ const char *zName,
+ SessionTable **ppTab
+){
+ int rc = SQLITE_OK;
+ int nName = sqlite3Strlen30(zName);
+ SessionTable *pRet;
+
+ /* Search for an existing table */
+ for(pRet=pSession->pTable; pRet; pRet=pRet->pNext){
+ if( 0==sqlite3_strnicmp(pRet->zName, zName, nName+1) ) break;
+ }
+
+ if( pRet==0 && pSession->bAutoAttach ){
+ /* If there is a table-filter configured, invoke it. If it returns 0,
+ ** do not automatically add the new table. */
+ if( pSession->xTableFilter==0
+ || pSession->xTableFilter(pSession->pFilterCtx, zName)
+ ){
+ rc = sqlite3session_attach(pSession, zName);
+ if( rc==SQLITE_OK ){
+ for(pRet=pSession->pTable; pRet->pNext; pRet=pRet->pNext);
+ assert( 0==sqlite3_strnicmp(pRet->zName, zName, nName+1) );
+ }
+ }
+ }
+
+ assert( rc==SQLITE_OK || pRet==0 );
+ *ppTab = pRet;
+ return rc;
+}
+
+/*
+** The 'pre-update' hook registered by this module with SQLite databases.
+*/
+static void xPreUpdate(
+ void *pCtx, /* Copy of third arg to preupdate_hook() */
+ sqlite3 *db, /* Database handle */
+ int op, /* SQLITE_UPDATE, DELETE or INSERT */
+ char const *zDb, /* Database name */
+ char const *zName, /* Table name */
+ sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
+ sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
+){
+ sqlite3_session *pSession;
+ int nDb = sqlite3Strlen30(zDb);
+
+ assert( sqlite3_mutex_held(db->mutex) );
+
+ for(pSession=(sqlite3_session *)pCtx; pSession; pSession=pSession->pNext){
+ SessionTable *pTab;
+
+ /* If this session is attached to a different database ("main", "temp"
+ ** etc.), or if it is not currently enabled, there is nothing to do. Skip
+ ** to the next session object attached to this database. */
+ if( pSession->bEnable==0 ) continue;
+ if( pSession->rc ) continue;
+ if( sqlite3_strnicmp(zDb, pSession->zDb, nDb+1) ) continue;
+
+ pSession->rc = sessionFindTable(pSession, zName, &pTab);
+ if( pTab ){
+ assert( pSession->rc==SQLITE_OK );
+ sessionPreupdateOneChange(op, pSession, pTab);
+ if( op==SQLITE_UPDATE ){
+ sessionPreupdateOneChange(SQLITE_INSERT, pSession, pTab);
+ }
+ }
+ }
+}
+
+/*
+** The pre-update hook implementations.
+*/
+static int sessionPreupdateOld(void *pCtx, int iVal, sqlite3_value **ppVal){
+ return sqlite3_preupdate_old((sqlite3*)pCtx, iVal, ppVal);
+}
+static int sessionPreupdateNew(void *pCtx, int iVal, sqlite3_value **ppVal){
+ return sqlite3_preupdate_new((sqlite3*)pCtx, iVal, ppVal);
+}
+static int sessionPreupdateCount(void *pCtx){
+ return sqlite3_preupdate_count((sqlite3*)pCtx);
+}
+static int sessionPreupdateDepth(void *pCtx){
+ return sqlite3_preupdate_depth((sqlite3*)pCtx);
+}
+
+/*
+** Install the pre-update hooks on the session object passed as the only
+** argument.
+*/
+static void sessionPreupdateHooks(
+ sqlite3_session *pSession
+){
+ pSession->hook.pCtx = (void*)pSession->db;
+ pSession->hook.xOld = sessionPreupdateOld;
+ pSession->hook.xNew = sessionPreupdateNew;
+ pSession->hook.xCount = sessionPreupdateCount;
+ pSession->hook.xDepth = sessionPreupdateDepth;
+}
+
+typedef struct SessionDiffCtx SessionDiffCtx;
+struct SessionDiffCtx {
+ sqlite3_stmt *pStmt;
+ int nOldOff;
+};
+
+/*
+** The diff hook implementations.
+*/
+static int sessionDiffOld(void *pCtx, int iVal, sqlite3_value **ppVal){
+ SessionDiffCtx *p = (SessionDiffCtx*)pCtx;
+ *ppVal = sqlite3_column_value(p->pStmt, iVal+p->nOldOff);
+ return SQLITE_OK;
+}
+static int sessionDiffNew(void *pCtx, int iVal, sqlite3_value **ppVal){
+ SessionDiffCtx *p = (SessionDiffCtx*)pCtx;
+ *ppVal = sqlite3_column_value(p->pStmt, iVal);
+ return SQLITE_OK;
+}
+static int sessionDiffCount(void *pCtx){
+ SessionDiffCtx *p = (SessionDiffCtx*)pCtx;
+ return p->nOldOff ? p->nOldOff : sqlite3_column_count(p->pStmt);
+}
+static int sessionDiffDepth(void *pCtx){
+ return 0;
+}
+
+/*
+** Install the diff hooks on the session object passed as the only
+** argument.
+*/
+static void sessionDiffHooks(
+ sqlite3_session *pSession,
+ SessionDiffCtx *pDiffCtx
+){
+ pSession->hook.pCtx = (void*)pDiffCtx;
+ pSession->hook.xOld = sessionDiffOld;
+ pSession->hook.xNew = sessionDiffNew;
+ pSession->hook.xCount = sessionDiffCount;
+ pSession->hook.xDepth = sessionDiffDepth;
+}
+
+static char *sessionExprComparePK(
+ int nCol,
+ const char *zDb1, const char *zDb2,
+ const char *zTab,
+ const char **azCol, u8 *abPK
+){
+ int i;
+ const char *zSep = "";
+ char *zRet = 0;
+
+ for(i=0; i<nCol; i++){
+ if( abPK[i] ){
+ zRet = sqlite3_mprintf("%z%s\"%w\".\"%w\".\"%w\"=\"%w\".\"%w\".\"%w\"",
+ zRet, zSep, zDb1, zTab, azCol[i], zDb2, zTab, azCol[i]
+ );
+ zSep = " AND ";
+ if( zRet==0 ) break;
+ }
+ }
+
+ return zRet;
+}
+
+static char *sessionExprCompareOther(
+ int nCol,
+ const char *zDb1, const char *zDb2,
+ const char *zTab,
+ const char **azCol, u8 *abPK
+){
+ int i;
+ const char *zSep = "";
+ char *zRet = 0;
+ int bHave = 0;
+
+ for(i=0; i<nCol; i++){
+ if( abPK[i]==0 ){
+ bHave = 1;
+ zRet = sqlite3_mprintf(
+ "%z%s\"%w\".\"%w\".\"%w\" IS NOT \"%w\".\"%w\".\"%w\"",
+ zRet, zSep, zDb1, zTab, azCol[i], zDb2, zTab, azCol[i]
+ );
+ zSep = " OR ";
+ if( zRet==0 ) break;
+ }
+ }
+
+ if( bHave==0 ){
+ assert( zRet==0 );
+ zRet = sqlite3_mprintf("0");
+ }
+
+ return zRet;
+}
+
+static char *sessionSelectFindNew(
+ int nCol,
+ const char *zDb1, /* Pick rows in this db only */
+ const char *zDb2, /* But not in this one */
+ const char *zTbl, /* Table name */
+ const char *zExpr
+){
+ char *zRet = sqlite3_mprintf(
+ "SELECT * FROM \"%w\".\"%w\" WHERE NOT EXISTS ("
+ " SELECT 1 FROM \"%w\".\"%w\" WHERE %s"
+ ")",
+ zDb1, zTbl, zDb2, zTbl, zExpr
+ );
+ return zRet;
+}
+
+static int sessionDiffFindNew(
+ int op,
+ sqlite3_session *pSession,
+ SessionTable *pTab,
+ const char *zDb1,
+ const char *zDb2,
+ char *zExpr
+){
+ int rc = SQLITE_OK;
+ char *zStmt = sessionSelectFindNew(pTab->nCol, zDb1, zDb2, pTab->zName,zExpr);
+
+ if( zStmt==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ sqlite3_stmt *pStmt;
+ rc = sqlite3_prepare(pSession->db, zStmt, -1, &pStmt, 0);
+ if( rc==SQLITE_OK ){
+ SessionDiffCtx *pDiffCtx = (SessionDiffCtx*)pSession->hook.pCtx;
+ pDiffCtx->pStmt = pStmt;
+ pDiffCtx->nOldOff = 0;
+ while( SQLITE_ROW==sqlite3_step(pStmt) ){
+ sessionPreupdateOneChange(op, pSession, pTab);
+ }
+ rc = sqlite3_finalize(pStmt);
+ }
+ sqlite3_free(zStmt);
+ }
+
+ return rc;
+}
+
+static int sessionDiffFindModified(
+ sqlite3_session *pSession,
+ SessionTable *pTab,
+ const char *zFrom,
+ const char *zExpr
+){
+ int rc = SQLITE_OK;
+
+ char *zExpr2 = sessionExprCompareOther(pTab->nCol,
+ pSession->zDb, zFrom, pTab->zName, pTab->azCol, pTab->abPK
+ );
+ if( zExpr2==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ char *zStmt = sqlite3_mprintf(
+ "SELECT * FROM \"%w\".\"%w\", \"%w\".\"%w\" WHERE %s AND (%z)",
+ pSession->zDb, pTab->zName, zFrom, pTab->zName, zExpr, zExpr2
+ );
+ if( zStmt==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ sqlite3_stmt *pStmt;
+ rc = sqlite3_prepare(pSession->db, zStmt, -1, &pStmt, 0);
+
+ if( rc==SQLITE_OK ){
+ SessionDiffCtx *pDiffCtx = (SessionDiffCtx*)pSession->hook.pCtx;
+ pDiffCtx->pStmt = pStmt;
+ pDiffCtx->nOldOff = pTab->nCol;
+ while( SQLITE_ROW==sqlite3_step(pStmt) ){
+ sessionPreupdateOneChange(SQLITE_UPDATE, pSession, pTab);
+ }
+ rc = sqlite3_finalize(pStmt);
+ }
+ sqlite3_free(zStmt);
+ }
+ }
+
+ return rc;
+}
+
+SQLITE_API int sqlite3session_diff(
+ sqlite3_session *pSession,
+ const char *zFrom,
+ const char *zTbl,
+ char **pzErrMsg
+){
+ const char *zDb = pSession->zDb;
+ int rc = pSession->rc;
+ SessionDiffCtx d;
+
+ memset(&d, 0, sizeof(d));
+ sessionDiffHooks(pSession, &d);
+
+ sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
+ if( pzErrMsg ) *pzErrMsg = 0;
+ if( rc==SQLITE_OK ){
+ char *zExpr = 0;
+ sqlite3 *db = pSession->db;
+ SessionTable *pTo; /* Table zTbl */
+
+ /* Locate and if necessary initialize the target table object */
+ rc = sessionFindTable(pSession, zTbl, &pTo);
+ if( pTo==0 ) goto diff_out;
+ if( sessionInitTable(pSession, pTo) ){
+ rc = pSession->rc;
+ goto diff_out;
+ }
+
+ /* Check the table schemas match */
+ if( rc==SQLITE_OK ){
+ int bHasPk = 0;
+ int bMismatch = 0;
+ int nCol; /* Columns in zFrom.zTbl */
+ u8 *abPK;
+ const char **azCol = 0;
+ rc = sessionTableInfo(db, zFrom, zTbl, &nCol, 0, &azCol, &abPK);
+ if( rc==SQLITE_OK ){
+ if( pTo->nCol!=nCol ){
+ bMismatch = 1;
+ }else{
+ int i;
+ for(i=0; i<nCol; i++){
+ if( pTo->abPK[i]!=abPK[i] ) bMismatch = 1;
+ if( sqlite3_stricmp(azCol[i], pTo->azCol[i]) ) bMismatch = 1;
+ if( abPK[i] ) bHasPk = 1;
+ }
+ }
+ }
+ sqlite3_free((char*)azCol);
+ if( bMismatch ){
+ *pzErrMsg = sqlite3_mprintf("table schemas do not match");
+ rc = SQLITE_SCHEMA;
+ }
+ if( bHasPk==0 ){
+ /* Ignore tables with no primary keys */
+ goto diff_out;
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ zExpr = sessionExprComparePK(pTo->nCol,
+ zDb, zFrom, pTo->zName, pTo->azCol, pTo->abPK
+ );
+ }
+
+ /* Find new rows */
+ if( rc==SQLITE_OK ){
+ rc = sessionDiffFindNew(SQLITE_INSERT, pSession, pTo, zDb, zFrom, zExpr);
+ }
+
+ /* Find old rows */
+ if( rc==SQLITE_OK ){
+ rc = sessionDiffFindNew(SQLITE_DELETE, pSession, pTo, zFrom, zDb, zExpr);
+ }
+
+ /* Find modified rows */
+ if( rc==SQLITE_OK ){
+ rc = sessionDiffFindModified(pSession, pTo, zFrom, zExpr);
+ }
+
+ sqlite3_free(zExpr);
+ }
+
+ diff_out:
+ sessionPreupdateHooks(pSession);
+ sqlite3_mutex_leave(sqlite3_db_mutex(pSession->db));
+ return rc;
+}
+
+/*
+** Create a session object. This session object will record changes to
+** database zDb attached to connection db.
+*/
+SQLITE_API int sqlite3session_create(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Name of db (e.g. "main") */
+ sqlite3_session **ppSession /* OUT: New session object */
+){
+ sqlite3_session *pNew; /* Newly allocated session object */
+ sqlite3_session *pOld; /* Session object already attached to db */
+ int nDb = sqlite3Strlen30(zDb); /* Length of zDb in bytes */
+
+ /* Zero the output value in case an error occurs. */
+ *ppSession = 0;
+
+ /* Allocate and populate the new session object. */
+ pNew = (sqlite3_session *)sqlite3_malloc(sizeof(sqlite3_session) + nDb + 1);
+ if( !pNew ) return SQLITE_NOMEM;
+ memset(pNew, 0, sizeof(sqlite3_session));
+ pNew->db = db;
+ pNew->zDb = (char *)&pNew[1];
+ pNew->bEnable = 1;
+ memcpy(pNew->zDb, zDb, nDb+1);
+ sessionPreupdateHooks(pNew);
+
+ /* Add the new session object to the linked list of session objects
+ ** attached to database handle $db. Do this under the cover of the db
+ ** handle mutex. */
+ sqlite3_mutex_enter(sqlite3_db_mutex(db));
+ pOld = (sqlite3_session*)sqlite3_preupdate_hook(db, xPreUpdate, (void*)pNew);
+ pNew->pNext = pOld;
+ sqlite3_mutex_leave(sqlite3_db_mutex(db));
+
+ *ppSession = pNew;
+ return SQLITE_OK;
+}
+
+/*
+** Free the list of table objects passed as the first argument. The contents
+** of the changed-rows hash tables are also deleted.
+*/
+static void sessionDeleteTable(SessionTable *pList){
+ SessionTable *pNext;
+ SessionTable *pTab;
+
+ for(pTab=pList; pTab; pTab=pNext){
+ int i;
+ pNext = pTab->pNext;
+ for(i=0; i<pTab->nChange; i++){
+ SessionChange *p;
+ SessionChange *pNextChange;
+ for(p=pTab->apChange[i]; p; p=pNextChange){
+ pNextChange = p->pNext;
+ sqlite3_free(p);
+ }
+ }
+ sqlite3_free((char*)pTab->azCol); /* cast works around VC++ bug */
+ sqlite3_free(pTab->apChange);
+ sqlite3_free(pTab);
+ }
+}
+
+/*
+** Delete a session object previously allocated using sqlite3session_create().
+*/
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession){
+ sqlite3 *db = pSession->db;
+ sqlite3_session *pHead;
+ sqlite3_session **pp;
+
+ /* Unlink the session from the linked list of sessions attached to the
+ ** database handle. Hold the db mutex while doing so. */
+ sqlite3_mutex_enter(sqlite3_db_mutex(db));
+ pHead = (sqlite3_session*)sqlite3_preupdate_hook(db, 0, 0);
+ for(pp=&pHead; ALWAYS((*pp)!=0); pp=&((*pp)->pNext)){
+ if( (*pp)==pSession ){
+ *pp = (*pp)->pNext;
+ if( pHead ) sqlite3_preupdate_hook(db, xPreUpdate, (void*)pHead);
+ break;
+ }
+ }
+ sqlite3_mutex_leave(sqlite3_db_mutex(db));
+ sqlite3ValueFree(pSession->pZeroBlob);
+
+ /* Delete all attached table objects. And the contents of their
+ ** associated hash-tables. */
+ sessionDeleteTable(pSession->pTable);
+
+ /* Free the session object itself. */
+ sqlite3_free(pSession);
+}
+
+/*
+** Set a table filter on a Session Object.
+*/
+SQLITE_API void sqlite3session_table_filter(
+ sqlite3_session *pSession,
+ int(*xFilter)(void*, const char*),
+ void *pCtx /* First argument passed to xFilter */
+){
+ pSession->bAutoAttach = 1;
+ pSession->pFilterCtx = pCtx;
+ pSession->xTableFilter = xFilter;
+}
+
+/*
+** Attach a table to a session. All subsequent changes made to the table
+** while the session object is enabled will be recorded.
+**
+** Only tables that have a PRIMARY KEY defined may be attached. It does
+** not matter if the PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias)
+** or not.
+*/
+SQLITE_API int sqlite3session_attach(
+ sqlite3_session *pSession, /* Session object */
+ const char *zName /* Table name */
+){
+ int rc = SQLITE_OK;
+ sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
+
+ if( !zName ){
+ pSession->bAutoAttach = 1;
+ }else{
+ SessionTable *pTab; /* New table object (if required) */
+ int nName; /* Number of bytes in string zName */
+
+ /* First search for an existing entry. If one is found, this call is
+ ** a no-op. Return early. */
+ nName = sqlite3Strlen30(zName);
+ for(pTab=pSession->pTable; pTab; pTab=pTab->pNext){
+ if( 0==sqlite3_strnicmp(pTab->zName, zName, nName+1) ) break;
+ }
+
+ if( !pTab ){
+ /* Allocate new SessionTable object. */
+ pTab = (SessionTable *)sqlite3_malloc(sizeof(SessionTable) + nName + 1);
+ if( !pTab ){
+ rc = SQLITE_NOMEM;
+ }else{
+ /* Populate the new SessionTable object and link it into the list.
+ ** The new object must be linked onto the end of the list, not
+ ** simply added to the start of it in order to ensure that tables
+ ** appear in the correct order when a changeset or patchset is
+ ** eventually generated. */
+ SessionTable **ppTab;
+ memset(pTab, 0, sizeof(SessionTable));
+ pTab->zName = (char *)&pTab[1];
+ memcpy(pTab->zName, zName, nName+1);
+ for(ppTab=&pSession->pTable; *ppTab; ppTab=&(*ppTab)->pNext);
+ *ppTab = pTab;
+ }
+ }
+ }
+
+ sqlite3_mutex_leave(sqlite3_db_mutex(pSession->db));
+ return rc;
+}
+
+/*
+** Ensure that there is room in the buffer to append nByte bytes of data.
+** If not, use sqlite3_realloc() to grow the buffer so that there is.
+**
+** If successful, return zero. Otherwise, if an OOM condition is encountered,
+** set *pRc to SQLITE_NOMEM and return non-zero.
+*/
+static int sessionBufferGrow(SessionBuffer *p, int nByte, int *pRc){
+ if( *pRc==SQLITE_OK && p->nAlloc-p->nBuf<nByte ){
+ u8 *aNew;
+ int nNew = p->nAlloc ? p->nAlloc : 128;
+ do {
+ nNew = nNew*2;
+ }while( nNew<(p->nBuf+nByte) );
+
+ aNew = (u8 *)sqlite3_realloc(p->aBuf, nNew);
+ if( 0==aNew ){
+ *pRc = SQLITE_NOMEM;
+ }else{
+ p->aBuf = aNew;
+ p->nAlloc = nNew;
+ }
+ }
+ return (*pRc!=SQLITE_OK);
+}
+
+/*
+** Append the value passed as the second argument to the buffer passed
+** as the first.
+**
+** This function is a no-op if *pRc is non-zero when it is called.
+** Otherwise, if an error occurs, *pRc is set to an SQLite error code
+** before returning.
+*/
+static void sessionAppendValue(SessionBuffer *p, sqlite3_value *pVal, int *pRc){
+ int rc = *pRc;
+ if( rc==SQLITE_OK ){
+ int nByte = 0;
+ rc = sessionSerializeValue(0, pVal, &nByte);
+ sessionBufferGrow(p, nByte, &rc);
+ if( rc==SQLITE_OK ){
+ rc = sessionSerializeValue(&p->aBuf[p->nBuf], pVal, 0);
+ p->nBuf += nByte;
+ }else{
+ *pRc = rc;
+ }
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append a single byte to the buffer.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendByte(SessionBuffer *p, u8 v, int *pRc){
+ if( 0==sessionBufferGrow(p, 1, pRc) ){
+ p->aBuf[p->nBuf++] = v;
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append a single varint to the buffer.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendVarint(SessionBuffer *p, int v, int *pRc){
+ if( 0==sessionBufferGrow(p, 9, pRc) ){
+ p->nBuf += sessionVarintPut(&p->aBuf[p->nBuf], v);
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append a blob of data to the buffer.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendBlob(
+ SessionBuffer *p,
+ const u8 *aBlob,
+ int nBlob,
+ int *pRc
+){
+ if( nBlob>0 && 0==sessionBufferGrow(p, nBlob, pRc) ){
+ memcpy(&p->aBuf[p->nBuf], aBlob, nBlob);
+ p->nBuf += nBlob;
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append a string to the buffer. All bytes in the string
+** up to (but not including) the nul-terminator are written to the buffer.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendStr(
+ SessionBuffer *p,
+ const char *zStr,
+ int *pRc
+){
+ int nStr = sqlite3Strlen30(zStr);
+ if( 0==sessionBufferGrow(p, nStr, pRc) ){
+ memcpy(&p->aBuf[p->nBuf], zStr, nStr);
+ p->nBuf += nStr;
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append the string representation of integer iVal
+** to the buffer. No nul-terminator is written.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendInteger(
+ SessionBuffer *p, /* Buffer to append to */
+ int iVal, /* Value to write the string rep. of */
+ int *pRc /* IN/OUT: Error code */
+){
+ char aBuf[24];
+ sqlite3_snprintf(sizeof(aBuf)-1, aBuf, "%d", iVal);
+ sessionAppendStr(p, aBuf, pRc);
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwise, append the string zStr enclosed in quotes (") and
+** with any embedded quote characters escaped to the buffer. No
+** nul-terminator byte is written.
+**
+** If an OOM condition is encountered, set *pRc to SQLITE_NOMEM before
+** returning.
+*/
+static void sessionAppendIdent(
+ SessionBuffer *p, /* Buffer to a append to */
+ const char *zStr, /* String to quote, escape and append */
+ int *pRc /* IN/OUT: Error code */
+){
+ int nStr = sqlite3Strlen30(zStr)*2 + 2 + 1;
+ if( 0==sessionBufferGrow(p, nStr, pRc) ){
+ char *zOut = (char *)&p->aBuf[p->nBuf];
+ const char *zIn = zStr;
+ *zOut++ = '"';
+ while( *zIn ){
+ if( *zIn=='"' ) *zOut++ = '"';
+ *zOut++ = *(zIn++);
+ }
+ *zOut++ = '"';
+ p->nBuf = (int)((u8 *)zOut - p->aBuf);
+ }
+}
+
+/*
+** This function is a no-op if *pRc is other than SQLITE_OK when it is
+** called. Otherwse, it appends the serialized version of the value stored
+** in column iCol of the row that SQL statement pStmt currently points
+** to to the buffer.
+*/
+static void sessionAppendCol(
+ SessionBuffer *p, /* Buffer to append to */
+ sqlite3_stmt *pStmt, /* Handle pointing to row containing value */
+ int iCol, /* Column to read value from */
+ int *pRc /* IN/OUT: Error code */
+){
+ if( *pRc==SQLITE_OK ){
+ int eType = sqlite3_column_type(pStmt, iCol);
+ sessionAppendByte(p, (u8)eType, pRc);
+ if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ sqlite3_int64 i;
+ u8 aBuf[8];
+ if( eType==SQLITE_INTEGER ){
+ i = sqlite3_column_int64(pStmt, iCol);
+ }else{
+ double r = sqlite3_column_double(pStmt, iCol);
+ memcpy(&i, &r, 8);
+ }
+ sessionPutI64(aBuf, i);
+ sessionAppendBlob(p, aBuf, 8, pRc);
+ }
+ if( eType==SQLITE_BLOB || eType==SQLITE_TEXT ){
+ u8 *z;
+ int nByte;
+ if( eType==SQLITE_BLOB ){
+ z = (u8 *)sqlite3_column_blob(pStmt, iCol);
+ }else{
+ z = (u8 *)sqlite3_column_text(pStmt, iCol);
+ }
+ nByte = sqlite3_column_bytes(pStmt, iCol);
+ if( z || (eType==SQLITE_BLOB && nByte==0) ){
+ sessionAppendVarint(p, nByte, pRc);
+ sessionAppendBlob(p, z, nByte, pRc);
+ }else{
+ *pRc = SQLITE_NOMEM;
+ }
+ }
+ }
+}
+
+/*
+**
+** This function appends an update change to the buffer (see the comments
+** under "CHANGESET FORMAT" at the top of the file). An update change
+** consists of:
+**
+** 1 byte: SQLITE_UPDATE (0x17)
+** n bytes: old.* record (see RECORD FORMAT)
+** m bytes: new.* record (see RECORD FORMAT)
+**
+** The SessionChange object passed as the third argument contains the
+** values that were stored in the row when the session began (the old.*
+** values). The statement handle passed as the second argument points
+** at the current version of the row (the new.* values).
+**
+** If all of the old.* values are equal to their corresponding new.* value
+** (i.e. nothing has changed), then no data at all is appended to the buffer.
+**
+** Otherwise, the old.* record contains all primary key values and the
+** original values of any fields that have been modified. The new.* record
+** contains the new values of only those fields that have been modified.
+*/
+static int sessionAppendUpdate(
+ SessionBuffer *pBuf, /* Buffer to append to */
+ int bPatchset, /* True for "patchset", 0 for "changeset" */
+ sqlite3_stmt *pStmt, /* Statement handle pointing at new row */
+ SessionChange *p, /* Object containing old values */
+ u8 *abPK /* Boolean array - true for PK columns */
+){
+ int rc = SQLITE_OK;
+ SessionBuffer buf2 = {0,0,0}; /* Buffer to accumulate new.* record in */
+ int bNoop = 1; /* Set to zero if any values are modified */
+ int nRewind = pBuf->nBuf; /* Set to zero if any values are modified */
+ int i; /* Used to iterate through columns */
+ u8 *pCsr = p->aRecord; /* Used to iterate through old.* values */
+
+ sessionAppendByte(pBuf, SQLITE_UPDATE, &rc);
+ sessionAppendByte(pBuf, p->bIndirect, &rc);
+ for(i=0; i<sqlite3_column_count(pStmt); i++){
+ int bChanged = 0;
+ int nAdvance;
+ int eType = *pCsr;
+ switch( eType ){
+ case SQLITE_NULL:
+ nAdvance = 1;
+ if( sqlite3_column_type(pStmt, i)!=SQLITE_NULL ){
+ bChanged = 1;
+ }
+ break;
+
+ case SQLITE_FLOAT:
+ case SQLITE_INTEGER: {
+ nAdvance = 9;
+ if( eType==sqlite3_column_type(pStmt, i) ){
+ sqlite3_int64 iVal = sessionGetI64(&pCsr[1]);
+ if( eType==SQLITE_INTEGER ){
+ if( iVal==sqlite3_column_int64(pStmt, i) ) break;
+ }else{
+ double dVal;
+ memcpy(&dVal, &iVal, 8);
+ if( dVal==sqlite3_column_double(pStmt, i) ) break;
+ }
+ }
+ bChanged = 1;
+ break;
+ }
+
+ default: {
+ int n;
+ int nHdr = 1 + sessionVarintGet(&pCsr[1], &n);
+ assert( eType==SQLITE_TEXT || eType==SQLITE_BLOB );
+ nAdvance = nHdr + n;
+ if( eType==sqlite3_column_type(pStmt, i)
+ && n==sqlite3_column_bytes(pStmt, i)
+ && (n==0 || 0==memcmp(&pCsr[nHdr], sqlite3_column_blob(pStmt, i), n))
+ ){
+ break;
+ }
+ bChanged = 1;
+ }
+ }
+
+ /* If at least one field has been modified, this is not a no-op. */
+ if( bChanged ) bNoop = 0;
+
+ /* Add a field to the old.* record. This is omitted if this modules is
+ ** currently generating a patchset. */
+ if( bPatchset==0 ){
+ if( bChanged || abPK[i] ){
+ sessionAppendBlob(pBuf, pCsr, nAdvance, &rc);
+ }else{
+ sessionAppendByte(pBuf, 0, &rc);
+ }
+ }
+
+ /* Add a field to the new.* record. Or the only record if currently
+ ** generating a patchset. */
+ if( bChanged || (bPatchset && abPK[i]) ){
+ sessionAppendCol(&buf2, pStmt, i, &rc);
+ }else{
+ sessionAppendByte(&buf2, 0, &rc);
+ }
+
+ pCsr += nAdvance;
+ }
+
+ if( bNoop ){
+ pBuf->nBuf = nRewind;
+ }else{
+ sessionAppendBlob(pBuf, buf2.aBuf, buf2.nBuf, &rc);
+ }
+ sqlite3_free(buf2.aBuf);
+
+ return rc;
+}
+
+/*
+** Append a DELETE change to the buffer passed as the first argument. Use
+** the changeset format if argument bPatchset is zero, or the patchset
+** format otherwise.
+*/
+static int sessionAppendDelete(
+ SessionBuffer *pBuf, /* Buffer to append to */
+ int bPatchset, /* True for "patchset", 0 for "changeset" */
+ SessionChange *p, /* Object containing old values */
+ int nCol, /* Number of columns in table */
+ u8 *abPK /* Boolean array - true for PK columns */
+){
+ int rc = SQLITE_OK;
+
+ sessionAppendByte(pBuf, SQLITE_DELETE, &rc);
+ sessionAppendByte(pBuf, p->bIndirect, &rc);
+
+ if( bPatchset==0 ){
+ sessionAppendBlob(pBuf, p->aRecord, p->nRecord, &rc);
+ }else{
+ int i;
+ u8 *a = p->aRecord;
+ for(i=0; i<nCol; i++){
+ u8 *pStart = a;
+ int eType = *a++;
+
+ switch( eType ){
+ case 0:
+ case SQLITE_NULL:
+ assert( abPK[i]==0 );
+ break;
+
+ case SQLITE_FLOAT:
+ case SQLITE_INTEGER:
+ a += 8;
+ break;
+
+ default: {
+ int n;
+ a += sessionVarintGet(a, &n);
+ a += n;
+ break;
+ }
+ }
+ if( abPK[i] ){
+ sessionAppendBlob(pBuf, pStart, (int)(a-pStart), &rc);
+ }
+ }
+ assert( (a - p->aRecord)==p->nRecord );
+ }
+
+ return rc;
+}
+
+/*
+** Formulate and prepare a SELECT statement to retrieve a row from table
+** zTab in database zDb based on its primary key. i.e.
+**
+** SELECT * FROM zDb.zTab WHERE pk1 = ? AND pk2 = ? AND ...
+*/
+static int sessionSelectStmt(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Database name */
+ const char *zTab, /* Table name */
+ int nCol, /* Number of columns in table */
+ const char **azCol, /* Names of table columns */
+ u8 *abPK, /* PRIMARY KEY array */
+ sqlite3_stmt **ppStmt /* OUT: Prepared SELECT statement */
+){
+ int rc = SQLITE_OK;
+ char *zSql = 0;
+ int nSql = -1;
+
+ if( 0==sqlite3_stricmp("sqlite_stat1", zTab) ){
+ zSql = sqlite3_mprintf(
+ "SELECT tbl, ?2, stat FROM %Q.sqlite_stat1 WHERE tbl IS ?1 AND "
+ "idx IS (CASE WHEN ?2=X'' THEN NULL ELSE ?2 END)", zDb
+ );
+ if( zSql==0 ) rc = SQLITE_NOMEM;
+ }else{
+ int i;
+ const char *zSep = "";
+ SessionBuffer buf = {0, 0, 0};
+
+ sessionAppendStr(&buf, "SELECT * FROM ", &rc);
+ sessionAppendIdent(&buf, zDb, &rc);
+ sessionAppendStr(&buf, ".", &rc);
+ sessionAppendIdent(&buf, zTab, &rc);
+ sessionAppendStr(&buf, " WHERE ", &rc);
+ for(i=0; i<nCol; i++){
+ if( abPK[i] ){
+ sessionAppendStr(&buf, zSep, &rc);
+ sessionAppendIdent(&buf, azCol[i], &rc);
+ sessionAppendStr(&buf, " IS ?", &rc);
+ sessionAppendInteger(&buf, i+1, &rc);
+ zSep = " AND ";
+ }
+ }
+ zSql = (char*)buf.aBuf;
+ nSql = buf.nBuf;
+ }
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_prepare_v2(db, zSql, nSql, ppStmt, 0);
+ }
+ sqlite3_free(zSql);
+ return rc;
+}
+
+/*
+** Bind the PRIMARY KEY values from the change passed in argument pChange
+** to the SELECT statement passed as the first argument. The SELECT statement
+** is as prepared by function sessionSelectStmt().
+**
+** Return SQLITE_OK if all PK values are successfully bound, or an SQLite
+** error code (e.g. SQLITE_NOMEM) otherwise.
+*/
+static int sessionSelectBind(
+ sqlite3_stmt *pSelect, /* SELECT from sessionSelectStmt() */
+ int nCol, /* Number of columns in table */
+ u8 *abPK, /* PRIMARY KEY array */
+ SessionChange *pChange /* Change structure */
+){
+ int i;
+ int rc = SQLITE_OK;
+ u8 *a = pChange->aRecord;
+
+ for(i=0; i<nCol && rc==SQLITE_OK; i++){
+ int eType = *a++;
+
+ switch( eType ){
+ case 0:
+ case SQLITE_NULL:
+ assert( abPK[i]==0 );
+ break;
+
+ case SQLITE_INTEGER: {
+ if( abPK[i] ){
+ i64 iVal = sessionGetI64(a);
+ rc = sqlite3_bind_int64(pSelect, i+1, iVal);
+ }
+ a += 8;
+ break;
+ }
+
+ case SQLITE_FLOAT: {
+ if( abPK[i] ){
+ double rVal;
+ i64 iVal = sessionGetI64(a);
+ memcpy(&rVal, &iVal, 8);
+ rc = sqlite3_bind_double(pSelect, i+1, rVal);
+ }
+ a += 8;
+ break;
+ }
+
+ case SQLITE_TEXT: {
+ int n;
+ a += sessionVarintGet(a, &n);
+ if( abPK[i] ){
+ rc = sqlite3_bind_text(pSelect, i+1, (char *)a, n, SQLITE_TRANSIENT);
+ }
+ a += n;
+ break;
+ }
+
+ default: {
+ int n;
+ assert( eType==SQLITE_BLOB );
+ a += sessionVarintGet(a, &n);
+ if( abPK[i] ){
+ rc = sqlite3_bind_blob(pSelect, i+1, a, n, SQLITE_TRANSIENT);
+ }
+ a += n;
+ break;
+ }
+ }
+ }
+
+ return rc;
+}
+
+/*
+** This function is a no-op if *pRc is set to other than SQLITE_OK when it
+** is called. Otherwise, append a serialized table header (part of the binary
+** changeset format) to buffer *pBuf. If an error occurs, set *pRc to an
+** SQLite error code before returning.
+*/
+static void sessionAppendTableHdr(
+ SessionBuffer *pBuf, /* Append header to this buffer */
+ int bPatchset, /* Use the patchset format if true */
+ SessionTable *pTab, /* Table object to append header for */
+ int *pRc /* IN/OUT: Error code */
+){
+ /* Write a table header */
+ sessionAppendByte(pBuf, (bPatchset ? 'P' : 'T'), pRc);
+ sessionAppendVarint(pBuf, pTab->nCol, pRc);
+ sessionAppendBlob(pBuf, pTab->abPK, pTab->nCol, pRc);
+ sessionAppendBlob(pBuf, (u8 *)pTab->zName, (int)strlen(pTab->zName)+1, pRc);
+}
+
+/*
+** Generate either a changeset (if argument bPatchset is zero) or a patchset
+** (if it is non-zero) based on the current contents of the session object
+** passed as the first argument.
+**
+** If no error occurs, SQLITE_OK is returned and the new changeset/patchset
+** stored in output variables *pnChangeset and *ppChangeset. Or, if an error
+** occurs, an SQLite error code is returned and both output variables set
+** to 0.
+*/
+static int sessionGenerateChangeset(
+ sqlite3_session *pSession, /* Session object */
+ int bPatchset, /* True for patchset, false for changeset */
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut, /* First argument for xOutput */
+ int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppChangeset /* OUT: Buffer containing changeset */
+){
+ sqlite3 *db = pSession->db; /* Source database handle */
+ SessionTable *pTab; /* Used to iterate through attached tables */
+ SessionBuffer buf = {0,0,0}; /* Buffer in which to accumlate changeset */
+ int rc; /* Return code */
+
+ assert( xOutput==0 || (pnChangeset==0 && ppChangeset==0 ) );
+
+ /* Zero the output variables in case an error occurs. If this session
+ ** object is already in the error state (sqlite3_session.rc != SQLITE_OK),
+ ** this call will be a no-op. */
+ if( xOutput==0 ){
+ *pnChangeset = 0;
+ *ppChangeset = 0;
+ }
+
+ if( pSession->rc ) return pSession->rc;
+ rc = sqlite3_exec(pSession->db, "SAVEPOINT changeset", 0, 0, 0);
+ if( rc!=SQLITE_OK ) return rc;
+
+ sqlite3_mutex_enter(sqlite3_db_mutex(db));
+
+ for(pTab=pSession->pTable; rc==SQLITE_OK && pTab; pTab=pTab->pNext){
+ if( pTab->nEntry ){
+ const char *zName = pTab->zName;
+ int nCol; /* Number of columns in table */
+ u8 *abPK; /* Primary key array */
+ const char **azCol = 0; /* Table columns */
+ int i; /* Used to iterate through hash buckets */
+ sqlite3_stmt *pSel = 0; /* SELECT statement to query table pTab */
+ int nRewind = buf.nBuf; /* Initial size of write buffer */
+ int nNoop; /* Size of buffer after writing tbl header */
+
+ /* Check the table schema is still Ok. */
+ rc = sessionTableInfo(db, pSession->zDb, zName, &nCol, 0, &azCol, &abPK);
+ if( !rc && (pTab->nCol!=nCol || memcmp(abPK, pTab->abPK, nCol)) ){
+ rc = SQLITE_SCHEMA;
+ }
+
+ /* Write a table header */
+ sessionAppendTableHdr(&buf, bPatchset, pTab, &rc);
+
+ /* Build and compile a statement to execute: */
+ if( rc==SQLITE_OK ){
+ rc = sessionSelectStmt(
+ db, pSession->zDb, zName, nCol, azCol, abPK, &pSel);
+ }
+
+ nNoop = buf.nBuf;
+ for(i=0; i<pTab->nChange && rc==SQLITE_OK; i++){
+ SessionChange *p; /* Used to iterate through changes */
+
+ for(p=pTab->apChange[i]; rc==SQLITE_OK && p; p=p->pNext){
+ rc = sessionSelectBind(pSel, nCol, abPK, p);
+ if( rc!=SQLITE_OK ) continue;
+ if( sqlite3_step(pSel)==SQLITE_ROW ){
+ if( p->op==SQLITE_INSERT ){
+ int iCol;
+ sessionAppendByte(&buf, SQLITE_INSERT, &rc);
+ sessionAppendByte(&buf, p->bIndirect, &rc);
+ for(iCol=0; iCol<nCol; iCol++){
+ sessionAppendCol(&buf, pSel, iCol, &rc);
+ }
+ }else{
+ rc = sessionAppendUpdate(&buf, bPatchset, pSel, p, abPK);
+ }
+ }else if( p->op!=SQLITE_INSERT ){
+ rc = sessionAppendDelete(&buf, bPatchset, p, nCol, abPK);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_reset(pSel);
+ }
+
+ /* If the buffer is now larger than SESSIONS_STRM_CHUNK_SIZE, pass
+ ** its contents to the xOutput() callback. */
+ if( xOutput
+ && rc==SQLITE_OK
+ && buf.nBuf>nNoop
+ && buf.nBuf>SESSIONS_STRM_CHUNK_SIZE
+ ){
+ rc = xOutput(pOut, (void*)buf.aBuf, buf.nBuf);
+ nNoop = -1;
+ buf.nBuf = 0;
+ }
+
+ }
+ }
+
+ sqlite3_finalize(pSel);
+ if( buf.nBuf==nNoop ){
+ buf.nBuf = nRewind;
+ }
+ sqlite3_free((char*)azCol); /* cast works around VC++ bug */
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ if( xOutput==0 ){
+ *pnChangeset = buf.nBuf;
+ *ppChangeset = buf.aBuf;
+ buf.aBuf = 0;
+ }else if( buf.nBuf>0 ){
+ rc = xOutput(pOut, (void*)buf.aBuf, buf.nBuf);
+ }
+ }
+
+ sqlite3_free(buf.aBuf);
+ sqlite3_exec(db, "RELEASE changeset", 0, 0, 0);
+ sqlite3_mutex_leave(sqlite3_db_mutex(db));
+ return rc;
+}
+
+/*
+** Obtain a changeset object containing all changes recorded by the
+** session object passed as the first argument.
+**
+** It is the responsibility of the caller to eventually free the buffer
+** using sqlite3_free().
+*/
+SQLITE_API int sqlite3session_changeset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppChangeset /* OUT: Buffer containing changeset */
+){
+ return sessionGenerateChangeset(pSession, 0, 0, 0, pnChangeset, ppChangeset);
+}
+
+/*
+** Streaming version of sqlite3session_changeset().
+*/
+SQLITE_API int sqlite3session_changeset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ return sessionGenerateChangeset(pSession, 0, xOutput, pOut, 0, 0);
+}
+
+/*
+** Streaming version of sqlite3session_patchset().
+*/
+SQLITE_API int sqlite3session_patchset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ return sessionGenerateChangeset(pSession, 1, xOutput, pOut, 0, 0);
+}
+
+/*
+** Obtain a patchset object containing all changes recorded by the
+** session object passed as the first argument.
+**
+** It is the responsibility of the caller to eventually free the buffer
+** using sqlite3_free().
+*/
+SQLITE_API int sqlite3session_patchset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppPatchset /* OUT: Buffer containing changeset */
+){
+ return sessionGenerateChangeset(pSession, 1, 0, 0, pnPatchset, ppPatchset);
+}
+
+/*
+** Enable or disable the session object passed as the first argument.
+*/
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable){
+ int ret;
+ sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
+ if( bEnable>=0 ){
+ pSession->bEnable = bEnable;
+ }
+ ret = pSession->bEnable;
+ sqlite3_mutex_leave(sqlite3_db_mutex(pSession->db));
+ return ret;
+}
+
+/*
+** Enable or disable the session object passed as the first argument.
+*/
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect){
+ int ret;
+ sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
+ if( bIndirect>=0 ){
+ pSession->bIndirect = bIndirect;
+ }
+ ret = pSession->bIndirect;
+ sqlite3_mutex_leave(sqlite3_db_mutex(pSession->db));
+ return ret;
+}
+
+/*
+** Return true if there have been no changes to monitored tables recorded
+** by the session object passed as the only argument.
+*/
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession){
+ int ret = 0;
+ SessionTable *pTab;
+
+ sqlite3_mutex_enter(sqlite3_db_mutex(pSession->db));
+ for(pTab=pSession->pTable; pTab && ret==0; pTab=pTab->pNext){
+ ret = (pTab->nEntry>0);
+ }
+ sqlite3_mutex_leave(sqlite3_db_mutex(pSession->db));
+
+ return (ret==0);
+}
+
+/*
+** Do the work for either sqlite3changeset_start() or start_strm().
+*/
+static int sessionChangesetStart(
+ sqlite3_changeset_iter **pp, /* OUT: Changeset iterator handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int nChangeset, /* Size of buffer pChangeset in bytes */
+ void *pChangeset /* Pointer to buffer containing changeset */
+){
+ sqlite3_changeset_iter *pRet; /* Iterator to return */
+ int nByte; /* Number of bytes to allocate for iterator */
+
+ assert( xInput==0 || (pChangeset==0 && nChangeset==0) );
+
+ /* Zero the output variable in case an error occurs. */
+ *pp = 0;
+
+ /* Allocate and initialize the iterator structure. */
+ nByte = sizeof(sqlite3_changeset_iter);
+ pRet = (sqlite3_changeset_iter *)sqlite3_malloc(nByte);
+ if( !pRet ) return SQLITE_NOMEM;
+ memset(pRet, 0, sizeof(sqlite3_changeset_iter));
+ pRet->in.aData = (u8 *)pChangeset;
+ pRet->in.nData = nChangeset;
+ pRet->in.xInput = xInput;
+ pRet->in.pIn = pIn;
+ pRet->in.bEof = (xInput ? 0 : 1);
+
+ /* Populate the output variable and return success. */
+ *pp = pRet;
+ return SQLITE_OK;
+}
+
+/*
+** Create an iterator used to iterate through the contents of a changeset.
+*/
+SQLITE_API int sqlite3changeset_start(
+ sqlite3_changeset_iter **pp, /* OUT: Changeset iterator handle */
+ int nChangeset, /* Size of buffer pChangeset in bytes */
+ void *pChangeset /* Pointer to buffer containing changeset */
+){
+ return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset);
+}
+
+/*
+** Streaming version of sqlite3changeset_start().
+*/
+SQLITE_API int sqlite3changeset_start_strm(
+ sqlite3_changeset_iter **pp, /* OUT: Changeset iterator handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+){
+ return sessionChangesetStart(pp, xInput, pIn, 0, 0);
+}
+
+/*
+** If the SessionInput object passed as the only argument is a streaming
+** object and the buffer is full, discard some data to free up space.
+*/
+static void sessionDiscardData(SessionInput *pIn){
+ if( pIn->bEof && pIn->xInput && pIn->iNext>=SESSIONS_STRM_CHUNK_SIZE ){
+ int nMove = pIn->buf.nBuf - pIn->iNext;
+ assert( nMove>=0 );
+ if( nMove>0 ){
+ memmove(pIn->buf.aBuf, &pIn->buf.aBuf[pIn->iNext], nMove);
+ }
+ pIn->buf.nBuf -= pIn->iNext;
+ pIn->iNext = 0;
+ pIn->nData = pIn->buf.nBuf;
+ }
+}
+
+/*
+** Ensure that there are at least nByte bytes available in the buffer. Or,
+** if there are not nByte bytes remaining in the input, that all available
+** data is in the buffer.
+**
+** Return an SQLite error code if an error occurs, or SQLITE_OK otherwise.
+*/
+static int sessionInputBuffer(SessionInput *pIn, int nByte){
+ int rc = SQLITE_OK;
+ if( pIn->xInput ){
+ while( !pIn->bEof && (pIn->iNext+nByte)>=pIn->nData && rc==SQLITE_OK ){
+ int nNew = SESSIONS_STRM_CHUNK_SIZE;
+
+ if( pIn->bNoDiscard==0 ) sessionDiscardData(pIn);
+ if( SQLITE_OK==sessionBufferGrow(&pIn->buf, nNew, &rc) ){
+ rc = pIn->xInput(pIn->pIn, &pIn->buf.aBuf[pIn->buf.nBuf], &nNew);
+ if( nNew==0 ){
+ pIn->bEof = 1;
+ }else{
+ pIn->buf.nBuf += nNew;
+ }
+ }
+
+ pIn->aData = pIn->buf.aBuf;
+ pIn->nData = pIn->buf.nBuf;
+ }
+ }
+ return rc;
+}
+
+/*
+** When this function is called, *ppRec points to the start of a record
+** that contains nCol values. This function advances the pointer *ppRec
+** until it points to the byte immediately following that record.
+*/
+static void sessionSkipRecord(
+ u8 **ppRec, /* IN/OUT: Record pointer */
+ int nCol /* Number of values in record */
+){
+ u8 *aRec = *ppRec;
+ int i;
+ for(i=0; i<nCol; i++){
+ int eType = *aRec++;
+ if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){
+ int nByte;
+ aRec += sessionVarintGet((u8*)aRec, &nByte);
+ aRec += nByte;
+ }else if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ aRec += 8;
+ }
+ }
+
+ *ppRec = aRec;
+}
+
+/*
+** This function sets the value of the sqlite3_value object passed as the
+** first argument to a copy of the string or blob held in the aData[]
+** buffer. SQLITE_OK is returned if successful, or SQLITE_NOMEM if an OOM
+** error occurs.
+*/
+static int sessionValueSetStr(
+ sqlite3_value *pVal, /* Set the value of this object */
+ u8 *aData, /* Buffer containing string or blob data */
+ int nData, /* Size of buffer aData[] in bytes */
+ u8 enc /* String encoding (0 for blobs) */
+){
+ /* In theory this code could just pass SQLITE_TRANSIENT as the final
+ ** argument to sqlite3ValueSetStr() and have the copy created
+ ** automatically. But doing so makes it difficult to detect any OOM
+ ** error. Hence the code to create the copy externally. */
+ u8 *aCopy = sqlite3_malloc(nData+1);
+ if( aCopy==0 ) return SQLITE_NOMEM;
+ memcpy(aCopy, aData, nData);
+ sqlite3ValueSetStr(pVal, nData, (char*)aCopy, enc, sqlite3_free);
+ return SQLITE_OK;
+}
+
+/*
+** Deserialize a single record from a buffer in memory. See "RECORD FORMAT"
+** for details.
+**
+** When this function is called, *paChange points to the start of the record
+** to deserialize. Assuming no error occurs, *paChange is set to point to
+** one byte after the end of the same record before this function returns.
+** If the argument abPK is NULL, then the record contains nCol values. Or,
+** if abPK is other than NULL, then the record contains only the PK fields
+** (in other words, it is a patchset DELETE record).
+**
+** If successful, each element of the apOut[] array (allocated by the caller)
+** is set to point to an sqlite3_value object containing the value read
+** from the corresponding position in the record. If that value is not
+** included in the record (i.e. because the record is part of an UPDATE change
+** and the field was not modified), the corresponding element of apOut[] is
+** set to NULL.
+**
+** It is the responsibility of the caller to free all sqlite_value structures
+** using sqlite3_free().
+**
+** If an error occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+** The apOut[] array may have been partially populated in this case.
+*/
+static int sessionReadRecord(
+ SessionInput *pIn, /* Input data */
+ int nCol, /* Number of values in record */
+ u8 *abPK, /* Array of primary key flags, or NULL */
+ sqlite3_value **apOut /* Write values to this array */
+){
+ int i; /* Used to iterate through columns */
+ int rc = SQLITE_OK;
+
+ for(i=0; i<nCol && rc==SQLITE_OK; i++){
+ int eType = 0; /* Type of value (SQLITE_NULL, TEXT etc.) */
+ if( abPK && abPK[i]==0 ) continue;
+ rc = sessionInputBuffer(pIn, 9);
+ if( rc==SQLITE_OK ){
+ if( pIn->iNext>=pIn->nData ){
+ rc = SQLITE_CORRUPT_BKPT;
+ }else{
+ eType = pIn->aData[pIn->iNext++];
+ assert( apOut[i]==0 );
+ if( eType ){
+ apOut[i] = sqlite3ValueNew(0);
+ if( !apOut[i] ) rc = SQLITE_NOMEM;
+ }
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ u8 *aVal = &pIn->aData[pIn->iNext];
+ if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){
+ int nByte;
+ pIn->iNext += sessionVarintGet(aVal, &nByte);
+ rc = sessionInputBuffer(pIn, nByte);
+ if( rc==SQLITE_OK ){
+ if( nByte<0 || nByte>pIn->nData-pIn->iNext ){
+ rc = SQLITE_CORRUPT_BKPT;
+ }else{
+ u8 enc = (eType==SQLITE_TEXT ? SQLITE_UTF8 : 0);
+ rc = sessionValueSetStr(apOut[i],&pIn->aData[pIn->iNext],nByte,enc);
+ pIn->iNext += nByte;
+ }
+ }
+ }
+ if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ sqlite3_int64 v = sessionGetI64(aVal);
+ if( eType==SQLITE_INTEGER ){
+ sqlite3VdbeMemSetInt64(apOut[i], v);
+ }else{
+ double d;
+ memcpy(&d, &v, 8);
+ sqlite3VdbeMemSetDouble(apOut[i], d);
+ }
+ pIn->iNext += 8;
+ }
+ }
+ }
+
+ return rc;
+}
+
+/*
+** The input pointer currently points to the second byte of a table-header.
+** Specifically, to the following:
+**
+** + number of columns in table (varint)
+** + array of PK flags (1 byte per column),
+** + table name (nul terminated).
+**
+** This function ensures that all of the above is present in the input
+** buffer (i.e. that it can be accessed without any calls to xInput()).
+** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code.
+** The input pointer is not moved.
+*/
+static int sessionChangesetBufferTblhdr(SessionInput *pIn, int *pnByte){
+ int rc = SQLITE_OK;
+ int nCol = 0;
+ int nRead = 0;
+
+ rc = sessionInputBuffer(pIn, 9);
+ if( rc==SQLITE_OK ){
+ nRead += sessionVarintGet(&pIn->aData[pIn->iNext + nRead], &nCol);
+ /* The hard upper limit for the number of columns in an SQLite
+ ** database table is, according to sqliteLimit.h, 32676. So
+ ** consider any table-header that purports to have more than 65536
+ ** columns to be corrupt. This is convenient because otherwise,
+ ** if the (nCol>65536) condition below were omitted, a sufficiently
+ ** large value for nCol may cause nRead to wrap around and become
+ ** negative. Leading to a crash. */
+ if( nCol<0 || nCol>65536 ){
+ rc = SQLITE_CORRUPT_BKPT;
+ }else{
+ rc = sessionInputBuffer(pIn, nRead+nCol+100);
+ nRead += nCol;
+ }
+ }
+
+ while( rc==SQLITE_OK ){
+ while( (pIn->iNext + nRead)<pIn->nData && pIn->aData[pIn->iNext + nRead] ){
+ nRead++;
+ }
+ if( (pIn->iNext + nRead)<pIn->nData ) break;
+ rc = sessionInputBuffer(pIn, nRead + 100);
+ }
+ *pnByte = nRead+1;
+ return rc;
+}
+
+/*
+** The input pointer currently points to the first byte of the first field
+** of a record consisting of nCol columns. This function ensures the entire
+** record is buffered. It does not move the input pointer.
+**
+** If successful, SQLITE_OK is returned and *pnByte is set to the size of
+** the record in bytes. Otherwise, an SQLite error code is returned. The
+** final value of *pnByte is undefined in this case.
+*/
+static int sessionChangesetBufferRecord(
+ SessionInput *pIn, /* Input data */
+ int nCol, /* Number of columns in record */
+ int *pnByte /* OUT: Size of record in bytes */
+){
+ int rc = SQLITE_OK;
+ int nByte = 0;
+ int i;
+ for(i=0; rc==SQLITE_OK && i<nCol; i++){
+ int eType;
+ rc = sessionInputBuffer(pIn, nByte + 10);
+ if( rc==SQLITE_OK ){
+ eType = pIn->aData[pIn->iNext + nByte++];
+ if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){
+ int n;
+ nByte += sessionVarintGet(&pIn->aData[pIn->iNext+nByte], &n);
+ nByte += n;
+ rc = sessionInputBuffer(pIn, nByte);
+ }else if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){
+ nByte += 8;
+ }
+ }
+ }
+ *pnByte = nByte;
+ return rc;
+}
+
+/*
+** The input pointer currently points to the second byte of a table-header.
+** Specifically, to the following:
+**
+** + number of columns in table (varint)
+** + array of PK flags (1 byte per column),
+** + table name (nul terminated).
+**
+** This function decodes the table-header and populates the p->nCol,
+** p->zTab and p->abPK[] variables accordingly. The p->apValue[] array is
+** also allocated or resized according to the new value of p->nCol. The
+** input pointer is left pointing to the byte following the table header.
+**
+** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code
+** is returned and the final values of the various fields enumerated above
+** are undefined.
+*/
+static int sessionChangesetReadTblhdr(sqlite3_changeset_iter *p){
+ int rc;
+ int nCopy;
+ assert( p->rc==SQLITE_OK );
+
+ rc = sessionChangesetBufferTblhdr(&p->in, &nCopy);
+ if( rc==SQLITE_OK ){
+ int nByte;
+ int nVarint;
+ nVarint = sessionVarintGet(&p->in.aData[p->in.iNext], &p->nCol);
+ if( p->nCol>0 ){
+ nCopy -= nVarint;
+ p->in.iNext += nVarint;
+ nByte = p->nCol * sizeof(sqlite3_value*) * 2 + nCopy;
+ p->tblhdr.nBuf = 0;
+ sessionBufferGrow(&p->tblhdr, nByte, &rc);
+ }else{
+ rc = SQLITE_CORRUPT_BKPT;
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ int iPK = sizeof(sqlite3_value*)*p->nCol*2;
+ memset(p->tblhdr.aBuf, 0, iPK);
+ memcpy(&p->tblhdr.aBuf[iPK], &p->in.aData[p->in.iNext], nCopy);
+ p->in.iNext += nCopy;
+ }
+
+ p->apValue = (sqlite3_value**)p->tblhdr.aBuf;
+ p->abPK = (u8*)&p->apValue[p->nCol*2];
+ p->zTab = (char*)&p->abPK[p->nCol];
+ return (p->rc = rc);
+}
+
+/*
+** Advance the changeset iterator to the next change.
+**
+** If both paRec and pnRec are NULL, then this function works like the public
+** API sqlite3changeset_next(). If SQLITE_ROW is returned, then the
+** sqlite3changeset_new() and old() APIs may be used to query for values.
+**
+** Otherwise, if paRec and pnRec are not NULL, then a pointer to the change
+** record is written to *paRec before returning and the number of bytes in
+** the record to *pnRec.
+**
+** Either way, this function returns SQLITE_ROW if the iterator is
+** successfully advanced to the next change in the changeset, an SQLite
+** error code if an error occurs, or SQLITE_DONE if there are no further
+** changes in the changeset.
+*/
+static int sessionChangesetNext(
+ sqlite3_changeset_iter *p, /* Changeset iterator */
+ u8 **paRec, /* If non-NULL, store record pointer here */
+ int *pnRec, /* If non-NULL, store size of record here */
+ int *pbNew /* If non-NULL, true if new table */
+){
+ int i;
+ u8 op;
+
+ assert( (paRec==0 && pnRec==0) || (paRec && pnRec) );
+
+ /* If the iterator is in the error-state, return immediately. */
+ if( p->rc!=SQLITE_OK ) return p->rc;
+
+ /* Free the current contents of p->apValue[], if any. */
+ if( p->apValue ){
+ for(i=0; i<p->nCol*2; i++){
+ sqlite3ValueFree(p->apValue[i]);
+ }
+ memset(p->apValue, 0, sizeof(sqlite3_value*)*p->nCol*2);
+ }
+
+ /* Make sure the buffer contains at least 10 bytes of input data, or all
+ ** remaining data if there are less than 10 bytes available. This is
+ ** sufficient either for the 'T' or 'P' byte and the varint that follows
+ ** it, or for the two single byte values otherwise. */
+ p->rc = sessionInputBuffer(&p->in, 2);
+ if( p->rc!=SQLITE_OK ) return p->rc;
+
+ /* If the iterator is already at the end of the changeset, return DONE. */
+ if( p->in.iNext>=p->in.nData ){
+ return SQLITE_DONE;
+ }
+
+ sessionDiscardData(&p->in);
+ p->in.iCurrent = p->in.iNext;
+
+ op = p->in.aData[p->in.iNext++];
+ while( op=='T' || op=='P' ){
+ if( pbNew ) *pbNew = 1;
+ p->bPatchset = (op=='P');
+ if( sessionChangesetReadTblhdr(p) ) return p->rc;
+ if( (p->rc = sessionInputBuffer(&p->in, 2)) ) return p->rc;
+ p->in.iCurrent = p->in.iNext;
+ if( p->in.iNext>=p->in.nData ) return SQLITE_DONE;
+ op = p->in.aData[p->in.iNext++];
+ }
+
+ if( p->zTab==0 ){
+ /* The first record in the changeset is not a table header. Must be a
+ ** corrupt changeset. */
+ assert( p->in.iNext==1 );
+ return (p->rc = SQLITE_CORRUPT_BKPT);
+ }
+
+ p->op = op;
+ p->bIndirect = p->in.aData[p->in.iNext++];
+ if( p->op!=SQLITE_UPDATE && p->op!=SQLITE_DELETE && p->op!=SQLITE_INSERT ){
+ return (p->rc = SQLITE_CORRUPT_BKPT);
+ }
+
+ if( paRec ){
+ int nVal; /* Number of values to buffer */
+ if( p->bPatchset==0 && op==SQLITE_UPDATE ){
+ nVal = p->nCol * 2;
+ }else if( p->bPatchset && op==SQLITE_DELETE ){
+ nVal = 0;
+ for(i=0; i<p->nCol; i++) if( p->abPK[i] ) nVal++;
+ }else{
+ nVal = p->nCol;
+ }
+ p->rc = sessionChangesetBufferRecord(&p->in, nVal, pnRec);
+ if( p->rc!=SQLITE_OK ) return p->rc;
+ *paRec = &p->in.aData[p->in.iNext];
+ p->in.iNext += *pnRec;
+ }else{
+
+ /* If this is an UPDATE or DELETE, read the old.* record. */
+ if( p->op!=SQLITE_INSERT && (p->bPatchset==0 || p->op==SQLITE_DELETE) ){
+ u8 *abPK = p->bPatchset ? p->abPK : 0;
+ p->rc = sessionReadRecord(&p->in, p->nCol, abPK, p->apValue);
+ if( p->rc!=SQLITE_OK ) return p->rc;
+ }
+
+ /* If this is an INSERT or UPDATE, read the new.* record. */
+ if( p->op!=SQLITE_DELETE ){
+ p->rc = sessionReadRecord(&p->in, p->nCol, 0, &p->apValue[p->nCol]);
+ if( p->rc!=SQLITE_OK ) return p->rc;
+ }
+
+ if( p->bPatchset && p->op==SQLITE_UPDATE ){
+ /* If this is an UPDATE that is part of a patchset, then all PK and
+ ** modified fields are present in the new.* record. The old.* record
+ ** is currently completely empty. This block shifts the PK fields from
+ ** new.* to old.*, to accommodate the code that reads these arrays. */
+ for(i=0; i<p->nCol; i++){
+ assert( p->apValue[i]==0 );
+ if( p->abPK[i] ){
+ p->apValue[i] = p->apValue[i+p->nCol];
+ if( p->apValue[i]==0 ) return (p->rc = SQLITE_CORRUPT_BKPT);
+ p->apValue[i+p->nCol] = 0;
+ }
+ }
+ }
+ }
+
+ return SQLITE_ROW;
+}
+
+/*
+** Advance an iterator created by sqlite3changeset_start() to the next
+** change in the changeset. This function may return SQLITE_ROW, SQLITE_DONE
+** or SQLITE_CORRUPT.
+**
+** This function may not be called on iterators passed to a conflict handler
+** callback by changeset_apply().
+*/
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *p){
+ return sessionChangesetNext(p, 0, 0, 0);
+}
+
+/*
+** The following function extracts information on the current change
+** from a changeset iterator. It may only be called after changeset_next()
+** has returned SQLITE_ROW.
+*/
+SQLITE_API int sqlite3changeset_op(
+ sqlite3_changeset_iter *pIter, /* Iterator handle */
+ const char **pzTab, /* OUT: Pointer to table name */
+ int *pnCol, /* OUT: Number of columns in table */
+ int *pOp, /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+ int *pbIndirect /* OUT: True if change is indirect */
+){
+ *pOp = pIter->op;
+ *pnCol = pIter->nCol;
+ *pzTab = pIter->zTab;
+ if( pbIndirect ) *pbIndirect = pIter->bIndirect;
+ return SQLITE_OK;
+}
+
+/*
+** Return information regarding the PRIMARY KEY and number of columns in
+** the database table affected by the change that pIter currently points
+** to. This function may only be called after changeset_next() returns
+** SQLITE_ROW.
+*/
+SQLITE_API int sqlite3changeset_pk(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ unsigned char **pabPK, /* OUT: Array of boolean - true for PK cols */
+ int *pnCol /* OUT: Number of entries in output array */
+){
+ *pabPK = pIter->abPK;
+ if( pnCol ) *pnCol = pIter->nCol;
+ return SQLITE_OK;
+}
+
+/*
+** This function may only be called while the iterator is pointing to an
+** SQLITE_UPDATE or SQLITE_DELETE change (see sqlite3changeset_op()).
+** Otherwise, SQLITE_MISUSE is returned.
+**
+** It sets *ppValue to point to an sqlite3_value structure containing the
+** iVal'th value in the old.* record. Or, if that particular value is not
+** included in the record (because the change is an UPDATE and the field
+** was not modified and is not a PK column), set *ppValue to NULL.
+**
+** If value iVal is out-of-range, SQLITE_RANGE is returned and *ppValue is
+** not modified. Otherwise, SQLITE_OK.
+*/
+SQLITE_API int sqlite3changeset_old(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Index of old.* value to retrieve */
+ sqlite3_value **ppValue /* OUT: Old value (or NULL pointer) */
+){
+ if( pIter->op!=SQLITE_UPDATE && pIter->op!=SQLITE_DELETE ){
+ return SQLITE_MISUSE;
+ }
+ if( iVal<0 || iVal>=pIter->nCol ){
+ return SQLITE_RANGE;
+ }
+ *ppValue = pIter->apValue[iVal];
+ return SQLITE_OK;
+}
+
+/*
+** This function may only be called while the iterator is pointing to an
+** SQLITE_UPDATE or SQLITE_INSERT change (see sqlite3changeset_op()).
+** Otherwise, SQLITE_MISUSE is returned.
+**
+** It sets *ppValue to point to an sqlite3_value structure containing the
+** iVal'th value in the new.* record. Or, if that particular value is not
+** included in the record (because the change is an UPDATE and the field
+** was not modified), set *ppValue to NULL.
+**
+** If value iVal is out-of-range, SQLITE_RANGE is returned and *ppValue is
+** not modified. Otherwise, SQLITE_OK.
+*/
+SQLITE_API int sqlite3changeset_new(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Index of new.* value to retrieve */
+ sqlite3_value **ppValue /* OUT: New value (or NULL pointer) */
+){
+ if( pIter->op!=SQLITE_UPDATE && pIter->op!=SQLITE_INSERT ){
+ return SQLITE_MISUSE;
+ }
+ if( iVal<0 || iVal>=pIter->nCol ){
+ return SQLITE_RANGE;
+ }
+ *ppValue = pIter->apValue[pIter->nCol+iVal];
+ return SQLITE_OK;
+}
+
+/*
+** The following two macros are used internally. They are similar to the
+** sqlite3changeset_new() and sqlite3changeset_old() functions, except that
+** they omit all error checking and return a pointer to the requested value.
+*/
+#define sessionChangesetNew(pIter, iVal) (pIter)->apValue[(pIter)->nCol+(iVal)]
+#define sessionChangesetOld(pIter, iVal) (pIter)->apValue[(iVal)]
+
+/*
+** This function may only be called with a changeset iterator that has been
+** passed to an SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT
+** conflict-handler function. Otherwise, SQLITE_MISUSE is returned.
+**
+** If successful, *ppValue is set to point to an sqlite3_value structure
+** containing the iVal'th value of the conflicting record.
+**
+** If value iVal is out-of-range or some other error occurs, an SQLite error
+** code is returned. Otherwise, SQLITE_OK.
+*/
+SQLITE_API int sqlite3changeset_conflict(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Index of conflict record value to fetch */
+ sqlite3_value **ppValue /* OUT: Value from conflicting row */
+){
+ if( !pIter->pConflict ){
+ return SQLITE_MISUSE;
+ }
+ if( iVal<0 || iVal>=pIter->nCol ){
+ return SQLITE_RANGE;
+ }
+ *ppValue = sqlite3_column_value(pIter->pConflict, iVal);
+ return SQLITE_OK;
+}
+
+/*
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+SQLITE_API int sqlite3changeset_fk_conflicts(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int *pnOut /* OUT: Number of FK violations */
+){
+ if( pIter->pConflict || pIter->apValue ){
+ return SQLITE_MISUSE;
+ }
+ *pnOut = pIter->nCol;
+ return SQLITE_OK;
+}
+
+
+/*
+** Finalize an iterator allocated with sqlite3changeset_start().
+**
+** This function may not be called on iterators passed to a conflict handler
+** callback by changeset_apply().
+*/
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *p){
+ int rc = SQLITE_OK;
+ if( p ){
+ int i; /* Used to iterate through p->apValue[] */
+ rc = p->rc;
+ if( p->apValue ){
+ for(i=0; i<p->nCol*2; i++) sqlite3ValueFree(p->apValue[i]);
+ }
+ sqlite3_free(p->tblhdr.aBuf);
+ sqlite3_free(p->in.buf.aBuf);
+ sqlite3_free(p);
+ }
+ return rc;
+}
+
+static int sessionChangesetInvert(
+ SessionInput *pInput, /* Input changeset */
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut,
+ int *pnInverted, /* OUT: Number of bytes in output changeset */
+ void **ppInverted /* OUT: Inverse of pChangeset */
+){
+ int rc = SQLITE_OK; /* Return value */
+ SessionBuffer sOut; /* Output buffer */
+ int nCol = 0; /* Number of cols in current table */
+ u8 *abPK = 0; /* PK array for current table */
+ sqlite3_value **apVal = 0; /* Space for values for UPDATE inversion */
+ SessionBuffer sPK = {0, 0, 0}; /* PK array for current table */
+
+ /* Initialize the output buffer */
+ memset(&sOut, 0, sizeof(SessionBuffer));
+
+ /* Zero the output variables in case an error occurs. */
+ if( ppInverted ){
+ *ppInverted = 0;
+ *pnInverted = 0;
+ }
+
+ while( 1 ){
+ u8 eType;
+
+ /* Test for EOF. */
+ if( (rc = sessionInputBuffer(pInput, 2)) ) goto finished_invert;
+ if( pInput->iNext>=pInput->nData ) break;
+ eType = pInput->aData[pInput->iNext];
+
+ switch( eType ){
+ case 'T': {
+ /* A 'table' record consists of:
+ **
+ ** * A constant 'T' character,
+ ** * Number of columns in said table (a varint),
+ ** * An array of nCol bytes (sPK),
+ ** * A nul-terminated table name.
+ */
+ int nByte;
+ int nVar;
+ pInput->iNext++;
+ if( (rc = sessionChangesetBufferTblhdr(pInput, &nByte)) ){
+ goto finished_invert;
+ }
+ nVar = sessionVarintGet(&pInput->aData[pInput->iNext], &nCol);
+ sPK.nBuf = 0;
+ sessionAppendBlob(&sPK, &pInput->aData[pInput->iNext+nVar], nCol, &rc);
+ sessionAppendByte(&sOut, eType, &rc);
+ sessionAppendBlob(&sOut, &pInput->aData[pInput->iNext], nByte, &rc);
+ if( rc ) goto finished_invert;
+
+ pInput->iNext += nByte;
+ sqlite3_free(apVal);
+ apVal = 0;
+ abPK = sPK.aBuf;
+ break;
+ }
+
+ case SQLITE_INSERT:
+ case SQLITE_DELETE: {
+ int nByte;
+ int bIndirect = pInput->aData[pInput->iNext+1];
+ int eType2 = (eType==SQLITE_DELETE ? SQLITE_INSERT : SQLITE_DELETE);
+ pInput->iNext += 2;
+ assert( rc==SQLITE_OK );
+ rc = sessionChangesetBufferRecord(pInput, nCol, &nByte);
+ sessionAppendByte(&sOut, eType2, &rc);
+ sessionAppendByte(&sOut, bIndirect, &rc);
+ sessionAppendBlob(&sOut, &pInput->aData[pInput->iNext], nByte, &rc);
+ pInput->iNext += nByte;
+ if( rc ) goto finished_invert;
+ break;
+ }
+
+ case SQLITE_UPDATE: {
+ int iCol;
+
+ if( 0==apVal ){
+ apVal = (sqlite3_value **)sqlite3_malloc(sizeof(apVal[0])*nCol*2);
+ if( 0==apVal ){
+ rc = SQLITE_NOMEM;
+ goto finished_invert;
+ }
+ memset(apVal, 0, sizeof(apVal[0])*nCol*2);
+ }
+
+ /* Write the header for the new UPDATE change. Same as the original. */
+ sessionAppendByte(&sOut, eType, &rc);
+ sessionAppendByte(&sOut, pInput->aData[pInput->iNext+1], &rc);
+
+ /* Read the old.* and new.* records for the update change. */
+ pInput->iNext += 2;
+ rc = sessionReadRecord(pInput, nCol, 0, &apVal[0]);
+ if( rc==SQLITE_OK ){
+ rc = sessionReadRecord(pInput, nCol, 0, &apVal[nCol]);
+ }
+
+ /* Write the new old.* record. Consists of the PK columns from the
+ ** original old.* record, and the other values from the original
+ ** new.* record. */
+ for(iCol=0; iCol<nCol; iCol++){
+ sqlite3_value *pVal = apVal[iCol + (abPK[iCol] ? 0 : nCol)];
+ sessionAppendValue(&sOut, pVal, &rc);
+ }
+
+ /* Write the new new.* record. Consists of a copy of all values
+ ** from the original old.* record, except for the PK columns, which
+ ** are set to "undefined". */
+ for(iCol=0; iCol<nCol; iCol++){
+ sqlite3_value *pVal = (abPK[iCol] ? 0 : apVal[iCol]);
+ sessionAppendValue(&sOut, pVal, &rc);
+ }
+
+ for(iCol=0; iCol<nCol*2; iCol++){
+ sqlite3ValueFree(apVal[iCol]);
+ }
+ memset(apVal, 0, sizeof(apVal[0])*nCol*2);
+ if( rc!=SQLITE_OK ){
+ goto finished_invert;
+ }
+
+ break;
+ }
+
+ default:
+ rc = SQLITE_CORRUPT_BKPT;
+ goto finished_invert;
+ }
+
+ assert( rc==SQLITE_OK );
+ if( xOutput && sOut.nBuf>=SESSIONS_STRM_CHUNK_SIZE ){
+ rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
+ sOut.nBuf = 0;
+ if( rc!=SQLITE_OK ) goto finished_invert;
+ }
+ }
+
+ assert( rc==SQLITE_OK );
+ if( pnInverted ){
+ *pnInverted = sOut.nBuf;
+ *ppInverted = sOut.aBuf;
+ sOut.aBuf = 0;
+ }else if( sOut.nBuf>0 ){
+ rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
+ }
+
+ finished_invert:
+ sqlite3_free(sOut.aBuf);
+ sqlite3_free(apVal);
+ sqlite3_free(sPK.aBuf);
+ return rc;
+}
+
+
+/*
+** Invert a changeset object.
+*/
+SQLITE_API int sqlite3changeset_invert(
+ int nChangeset, /* Number of bytes in input */
+ const void *pChangeset, /* Input changeset */
+ int *pnInverted, /* OUT: Number of bytes in output changeset */
+ void **ppInverted /* OUT: Inverse of pChangeset */
+){
+ SessionInput sInput;
+
+ /* Set up the input stream */
+ memset(&sInput, 0, sizeof(SessionInput));
+ sInput.nData = nChangeset;
+ sInput.aData = (u8*)pChangeset;
+
+ return sessionChangesetInvert(&sInput, 0, 0, pnInverted, ppInverted);
+}
+
+/*
+** Streaming version of sqlite3changeset_invert().
+*/
+SQLITE_API int sqlite3changeset_invert_strm(
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ SessionInput sInput;
+ int rc;
+
+ /* Set up the input stream */
+ memset(&sInput, 0, sizeof(SessionInput));
+ sInput.xInput = xInput;
+ sInput.pIn = pIn;
+
+ rc = sessionChangesetInvert(&sInput, xOutput, pOut, 0, 0);
+ sqlite3_free(sInput.buf.aBuf);
+ return rc;
+}
+
+typedef struct SessionApplyCtx SessionApplyCtx;
+struct SessionApplyCtx {
+ sqlite3 *db;
+ sqlite3_stmt *pDelete; /* DELETE statement */
+ sqlite3_stmt *pUpdate; /* UPDATE statement */
+ sqlite3_stmt *pInsert; /* INSERT statement */
+ sqlite3_stmt *pSelect; /* SELECT statement */
+ int nCol; /* Size of azCol[] and abPK[] arrays */
+ const char **azCol; /* Array of column names */
+ u8 *abPK; /* Boolean array - true if column is in PK */
+ int bStat1; /* True if table is sqlite_stat1 */
+ int bDeferConstraints; /* True to defer constraints */
+ SessionBuffer constraints; /* Deferred constraints are stored here */
+ SessionBuffer rebase; /* Rebase information (if any) here */
+ int bRebaseStarted; /* If table header is already in rebase */
+};
+
+/*
+** Formulate a statement to DELETE a row from database db. Assuming a table
+** structure like this:
+**
+** CREATE TABLE x(a, b, c, d, PRIMARY KEY(a, c));
+**
+** The DELETE statement looks like this:
+**
+** DELETE FROM x WHERE a = :1 AND c = :3 AND (:5 OR b IS :2 AND d IS :4)
+**
+** Variable :5 (nCol+1) is a boolean. It should be set to 0 if we require
+** matching b and d values, or 1 otherwise. The second case comes up if the
+** conflict handler is invoked with NOTFOUND and returns CHANGESET_REPLACE.
+**
+** If successful, SQLITE_OK is returned and SessionApplyCtx.pDelete is left
+** pointing to the prepared version of the SQL statement.
+*/
+static int sessionDeleteRow(
+ sqlite3 *db, /* Database handle */
+ const char *zTab, /* Table name */
+ SessionApplyCtx *p /* Session changeset-apply context */
+){
+ int i;
+ const char *zSep = "";
+ int rc = SQLITE_OK;
+ SessionBuffer buf = {0, 0, 0};
+ int nPk = 0;
+
+ sessionAppendStr(&buf, "DELETE FROM ", &rc);
+ sessionAppendIdent(&buf, zTab, &rc);
+ sessionAppendStr(&buf, " WHERE ", &rc);
+
+ for(i=0; i<p->nCol; i++){
+ if( p->abPK[i] ){
+ nPk++;
+ sessionAppendStr(&buf, zSep, &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " = ?", &rc);
+ sessionAppendInteger(&buf, i+1, &rc);
+ zSep = " AND ";
+ }
+ }
+
+ if( nPk<p->nCol ){
+ sessionAppendStr(&buf, " AND (?", &rc);
+ sessionAppendInteger(&buf, p->nCol+1, &rc);
+ sessionAppendStr(&buf, " OR ", &rc);
+
+ zSep = "";
+ for(i=0; i<p->nCol; i++){
+ if( !p->abPK[i] ){
+ sessionAppendStr(&buf, zSep, &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " IS ?", &rc);
+ sessionAppendInteger(&buf, i+1, &rc);
+ zSep = "AND ";
+ }
+ }
+ sessionAppendStr(&buf, ")", &rc);
+ }
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_prepare_v2(db, (char *)buf.aBuf, buf.nBuf, &p->pDelete, 0);
+ }
+ sqlite3_free(buf.aBuf);
+
+ return rc;
+}
+
+/*
+** Formulate and prepare a statement to UPDATE a row from database db.
+** Assuming a table structure like this:
+**
+** CREATE TABLE x(a, b, c, d, PRIMARY KEY(a, c));
+**
+** The UPDATE statement looks like this:
+**
+** UPDATE x SET
+** a = CASE WHEN ?2 THEN ?3 ELSE a END,
+** b = CASE WHEN ?5 THEN ?6 ELSE b END,
+** c = CASE WHEN ?8 THEN ?9 ELSE c END,
+** d = CASE WHEN ?11 THEN ?12 ELSE d END
+** WHERE a = ?1 AND c = ?7 AND (?13 OR
+** (?5==0 OR b IS ?4) AND (?11==0 OR d IS ?10) AND
+** )
+**
+** For each column in the table, there are three variables to bind:
+**
+** ?(i*3+1) The old.* value of the column, if any.
+** ?(i*3+2) A boolean flag indicating that the value is being modified.
+** ?(i*3+3) The new.* value of the column, if any.
+**
+** Also, a boolean flag that, if set to true, causes the statement to update
+** a row even if the non-PK values do not match. This is required if the
+** conflict-handler is invoked with CHANGESET_DATA and returns
+** CHANGESET_REPLACE. This is variable "?(nCol*3+1)".
+**
+** If successful, SQLITE_OK is returned and SessionApplyCtx.pUpdate is left
+** pointing to the prepared version of the SQL statement.
+*/
+static int sessionUpdateRow(
+ sqlite3 *db, /* Database handle */
+ const char *zTab, /* Table name */
+ SessionApplyCtx *p /* Session changeset-apply context */
+){
+ int rc = SQLITE_OK;
+ int i;
+ const char *zSep = "";
+ SessionBuffer buf = {0, 0, 0};
+
+ /* Append "UPDATE tbl SET " */
+ sessionAppendStr(&buf, "UPDATE ", &rc);
+ sessionAppendIdent(&buf, zTab, &rc);
+ sessionAppendStr(&buf, " SET ", &rc);
+
+ /* Append the assignments */
+ for(i=0; i<p->nCol; i++){
+ sessionAppendStr(&buf, zSep, &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " = CASE WHEN ?", &rc);
+ sessionAppendInteger(&buf, i*3+2, &rc);
+ sessionAppendStr(&buf, " THEN ?", &rc);
+ sessionAppendInteger(&buf, i*3+3, &rc);
+ sessionAppendStr(&buf, " ELSE ", &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " END", &rc);
+ zSep = ", ";
+ }
+
+ /* Append the PK part of the WHERE clause */
+ sessionAppendStr(&buf, " WHERE ", &rc);
+ for(i=0; i<p->nCol; i++){
+ if( p->abPK[i] ){
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " = ?", &rc);
+ sessionAppendInteger(&buf, i*3+1, &rc);
+ sessionAppendStr(&buf, " AND ", &rc);
+ }
+ }
+
+ /* Append the non-PK part of the WHERE clause */
+ sessionAppendStr(&buf, " (?", &rc);
+ sessionAppendInteger(&buf, p->nCol*3+1, &rc);
+ sessionAppendStr(&buf, " OR 1", &rc);
+ for(i=0; i<p->nCol; i++){
+ if( !p->abPK[i] ){
+ sessionAppendStr(&buf, " AND (?", &rc);
+ sessionAppendInteger(&buf, i*3+2, &rc);
+ sessionAppendStr(&buf, "=0 OR ", &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ sessionAppendStr(&buf, " IS ?", &rc);
+ sessionAppendInteger(&buf, i*3+1, &rc);
+ sessionAppendStr(&buf, ")", &rc);
+ }
+ }
+ sessionAppendStr(&buf, ")", &rc);
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_prepare_v2(db, (char *)buf.aBuf, buf.nBuf, &p->pUpdate, 0);
+ }
+ sqlite3_free(buf.aBuf);
+
+ return rc;
+}
+
+
+/*
+** Formulate and prepare an SQL statement to query table zTab by primary
+** key. Assuming the following table structure:
+**
+** CREATE TABLE x(a, b, c, d, PRIMARY KEY(a, c));
+**
+** The SELECT statement looks like this:
+**
+** SELECT * FROM x WHERE a = ?1 AND c = ?3
+**
+** If successful, SQLITE_OK is returned and SessionApplyCtx.pSelect is left
+** pointing to the prepared version of the SQL statement.
+*/
+static int sessionSelectRow(
+ sqlite3 *db, /* Database handle */
+ const char *zTab, /* Table name */
+ SessionApplyCtx *p /* Session changeset-apply context */
+){
+ return sessionSelectStmt(
+ db, "main", zTab, p->nCol, p->azCol, p->abPK, &p->pSelect);
+}
+
+/*
+** Formulate and prepare an INSERT statement to add a record to table zTab.
+** For example:
+**
+** INSERT INTO main."zTab" VALUES(?1, ?2, ?3 ...);
+**
+** If successful, SQLITE_OK is returned and SessionApplyCtx.pInsert is left
+** pointing to the prepared version of the SQL statement.
+*/
+static int sessionInsertRow(
+ sqlite3 *db, /* Database handle */
+ const char *zTab, /* Table name */
+ SessionApplyCtx *p /* Session changeset-apply context */
+){
+ int rc = SQLITE_OK;
+ int i;
+ SessionBuffer buf = {0, 0, 0};
+
+ sessionAppendStr(&buf, "INSERT INTO main.", &rc);
+ sessionAppendIdent(&buf, zTab, &rc);
+ sessionAppendStr(&buf, "(", &rc);
+ for(i=0; i<p->nCol; i++){
+ if( i!=0 ) sessionAppendStr(&buf, ", ", &rc);
+ sessionAppendIdent(&buf, p->azCol[i], &rc);
+ }
+
+ sessionAppendStr(&buf, ") VALUES(?", &rc);
+ for(i=1; i<p->nCol; i++){
+ sessionAppendStr(&buf, ", ?", &rc);
+ }
+ sessionAppendStr(&buf, ")", &rc);
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_prepare_v2(db, (char *)buf.aBuf, buf.nBuf, &p->pInsert, 0);
+ }
+ sqlite3_free(buf.aBuf);
+ return rc;
+}
+
+static int sessionPrepare(sqlite3 *db, sqlite3_stmt **pp, const char *zSql){
+ return sqlite3_prepare_v2(db, zSql, -1, pp, 0);
+}
+
+/*
+** Prepare statements for applying changes to the sqlite_stat1 table.
+** These are similar to those created by sessionSelectRow(),
+** sessionInsertRow(), sessionUpdateRow() and sessionDeleteRow() for
+** other tables.
+*/
+static int sessionStat1Sql(sqlite3 *db, SessionApplyCtx *p){
+ int rc = sessionSelectRow(db, "sqlite_stat1", p);
+ if( rc==SQLITE_OK ){
+ rc = sessionPrepare(db, &p->pInsert,
+ "INSERT INTO main.sqlite_stat1 VALUES(?1, "
+ "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END, "
+ "?3)"
+ );
+ }
+ if( rc==SQLITE_OK ){
+ rc = sessionPrepare(db, &p->pUpdate,
+ "UPDATE main.sqlite_stat1 SET "
+ "tbl = CASE WHEN ?2 THEN ?3 ELSE tbl END, "
+ "idx = CASE WHEN ?5 THEN ?6 ELSE idx END, "
+ "stat = CASE WHEN ?8 THEN ?9 ELSE stat END "
+ "WHERE tbl=?1 AND idx IS "
+ "CASE WHEN length(?4)=0 AND typeof(?4)='blob' THEN NULL ELSE ?4 END "
+ "AND (?10 OR ?8=0 OR stat IS ?7)"
+ );
+ }
+ if( rc==SQLITE_OK ){
+ rc = sessionPrepare(db, &p->pDelete,
+ "DELETE FROM main.sqlite_stat1 WHERE tbl=?1 AND idx IS "
+ "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END "
+ "AND (?4 OR stat IS ?3)"
+ );
+ }
+ return rc;
+}
+
+/*
+** A wrapper around sqlite3_bind_value() that detects an extra problem.
+** See comments in the body of this function for details.
+*/
+static int sessionBindValue(
+ sqlite3_stmt *pStmt, /* Statement to bind value to */
+ int i, /* Parameter number to bind to */
+ sqlite3_value *pVal /* Value to bind */
+){
+ int eType = sqlite3_value_type(pVal);
+ /* COVERAGE: The (pVal->z==0) branch is never true using current versions
+ ** of SQLite. If a malloc fails in an sqlite3_value_xxx() function, either
+ ** the (pVal->z) variable remains as it was or the type of the value is
+ ** set to SQLITE_NULL. */
+ if( (eType==SQLITE_TEXT || eType==SQLITE_BLOB) && pVal->z==0 ){
+ /* This condition occurs when an earlier OOM in a call to
+ ** sqlite3_value_text() or sqlite3_value_blob() (perhaps from within
+ ** a conflict-handler) has zeroed the pVal->z pointer. Return NOMEM. */
+ return SQLITE_NOMEM;
+ }
+ return sqlite3_bind_value(pStmt, i, pVal);
+}
+
+/*
+** Iterator pIter must point to an SQLITE_INSERT entry. This function
+** transfers new.* values from the current iterator entry to statement
+** pStmt. The table being inserted into has nCol columns.
+**
+** New.* value $i from the iterator is bound to variable ($i+1) of
+** statement pStmt. If parameter abPK is NULL, all values from 0 to (nCol-1)
+** are transfered to the statement. Otherwise, if abPK is not NULL, it points
+** to an array nCol elements in size. In this case only those values for
+** which abPK[$i] is true are read from the iterator and bound to the
+** statement.
+**
+** An SQLite error code is returned if an error occurs. Otherwise, SQLITE_OK.
+*/
+static int sessionBindRow(
+ sqlite3_changeset_iter *pIter, /* Iterator to read values from */
+ int(*xValue)(sqlite3_changeset_iter *, int, sqlite3_value **),
+ int nCol, /* Number of columns */
+ u8 *abPK, /* If not NULL, bind only if true */
+ sqlite3_stmt *pStmt /* Bind values to this statement */
+){
+ int i;
+ int rc = SQLITE_OK;
+
+ /* Neither sqlite3changeset_old or sqlite3changeset_new can fail if the
+ ** argument iterator points to a suitable entry. Make sure that xValue
+ ** is one of these to guarantee that it is safe to ignore the return
+ ** in the code below. */
+ assert( xValue==sqlite3changeset_old || xValue==sqlite3changeset_new );
+
+ for(i=0; rc==SQLITE_OK && i<nCol; i++){
+ if( !abPK || abPK[i] ){
+ sqlite3_value *pVal;
+ (void)xValue(pIter, i, &pVal);
+ if( pVal==0 ){
+ /* The value in the changeset was "undefined". This indicates a
+ ** corrupt changeset blob. */
+ rc = SQLITE_CORRUPT_BKPT;
+ }else{
+ rc = sessionBindValue(pStmt, i+1, pVal);
+ }
+ }
+ }
+ return rc;
+}
+
+/*
+** SQL statement pSelect is as generated by the sessionSelectRow() function.
+** This function binds the primary key values from the change that changeset
+** iterator pIter points to to the SELECT and attempts to seek to the table
+** entry. If a row is found, the SELECT statement left pointing at the row
+** and SQLITE_ROW is returned. Otherwise, if no row is found and no error
+** has occured, the statement is reset and SQLITE_OK is returned. If an
+** error occurs, the statement is reset and an SQLite error code is returned.
+**
+** If this function returns SQLITE_ROW, the caller must eventually reset()
+** statement pSelect. If any other value is returned, the statement does
+** not require a reset().
+**
+** If the iterator currently points to an INSERT record, bind values from the
+** new.* record to the SELECT statement. Or, if it points to a DELETE or
+** UPDATE, bind values from the old.* record.
+*/
+static int sessionSeekToRow(
+ sqlite3 *db, /* Database handle */
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ u8 *abPK, /* Primary key flags array */
+ sqlite3_stmt *pSelect /* SELECT statement from sessionSelectRow() */
+){
+ int rc; /* Return code */
+ int nCol; /* Number of columns in table */
+ int op; /* Changset operation (SQLITE_UPDATE etc.) */
+ const char *zDummy; /* Unused */
+
+ sqlite3changeset_op(pIter, &zDummy, &nCol, &op, 0);
+ rc = sessionBindRow(pIter,
+ op==SQLITE_INSERT ? sqlite3changeset_new : sqlite3changeset_old,
+ nCol, abPK, pSelect
+ );
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_step(pSelect);
+ if( rc!=SQLITE_ROW ) rc = sqlite3_reset(pSelect);
+ }
+
+ return rc;
+}
+
+/*
+** This function is called from within sqlite3changset_apply_v2() when
+** a conflict is encountered and resolved using conflict resolution
+** mode eType (either SQLITE_CHANGESET_OMIT or SQLITE_CHANGESET_REPLACE)..
+** It adds a conflict resolution record to the buffer in
+** SessionApplyCtx.rebase, which will eventually be returned to the caller
+** of apply_v2() as the "rebase" buffer.
+**
+** Return SQLITE_OK if successful, or an SQLite error code otherwise.
+*/
+static int sessionRebaseAdd(
+ SessionApplyCtx *p, /* Apply context */
+ int eType, /* Conflict resolution (OMIT or REPLACE) */
+ sqlite3_changeset_iter *pIter /* Iterator pointing at current change */
+){
+ int rc = SQLITE_OK;
+ int i;
+ int eOp = pIter->op;
+ if( p->bRebaseStarted==0 ){
+ /* Append a table-header to the rebase buffer */
+ const char *zTab = pIter->zTab;
+ sessionAppendByte(&p->rebase, 'T', &rc);
+ sessionAppendVarint(&p->rebase, p->nCol, &rc);
+ sessionAppendBlob(&p->rebase, p->abPK, p->nCol, &rc);
+ sessionAppendBlob(&p->rebase, (u8*)zTab, (int)strlen(zTab)+1, &rc);
+ p->bRebaseStarted = 1;
+ }
+
+ assert( eType==SQLITE_CHANGESET_REPLACE||eType==SQLITE_CHANGESET_OMIT );
+ assert( eOp==SQLITE_DELETE || eOp==SQLITE_INSERT || eOp==SQLITE_UPDATE );
+
+ sessionAppendByte(&p->rebase,
+ (eOp==SQLITE_DELETE ? SQLITE_DELETE : SQLITE_INSERT), &rc
+ );
+ sessionAppendByte(&p->rebase, (eType==SQLITE_CHANGESET_REPLACE), &rc);
+ for(i=0; i<p->nCol; i++){
+ sqlite3_value *pVal = 0;
+ if( eOp==SQLITE_DELETE || (eOp==SQLITE_UPDATE && p->abPK[i]) ){
+ sqlite3changeset_old(pIter, i, &pVal);
+ }else{
+ sqlite3changeset_new(pIter, i, &pVal);
+ }
+ sessionAppendValue(&p->rebase, pVal, &rc);
+ }
+
+ return rc;
+}
+
+/*
+** Invoke the conflict handler for the change that the changeset iterator
+** currently points to.
+**
+** Argument eType must be either CHANGESET_DATA or CHANGESET_CONFLICT.
+** If argument pbReplace is NULL, then the type of conflict handler invoked
+** depends solely on eType, as follows:
+**
+** eType value Value passed to xConflict
+** -------------------------------------------------
+** CHANGESET_DATA CHANGESET_NOTFOUND
+** CHANGESET_CONFLICT CHANGESET_CONSTRAINT
+**
+** Or, if pbReplace is not NULL, then an attempt is made to find an existing
+** record with the same primary key as the record about to be deleted, updated
+** or inserted. If such a record can be found, it is available to the conflict
+** handler as the "conflicting" record. In this case the type of conflict
+** handler invoked is as follows:
+**
+** eType value PK Record found? Value passed to xConflict
+** ----------------------------------------------------------------
+** CHANGESET_DATA Yes CHANGESET_DATA
+** CHANGESET_DATA No CHANGESET_NOTFOUND
+** CHANGESET_CONFLICT Yes CHANGESET_CONFLICT
+** CHANGESET_CONFLICT No CHANGESET_CONSTRAINT
+**
+** If pbReplace is not NULL, and a record with a matching PK is found, and
+** the conflict handler function returns SQLITE_CHANGESET_REPLACE, *pbReplace
+** is set to non-zero before returning SQLITE_OK.
+**
+** If the conflict handler returns SQLITE_CHANGESET_ABORT, SQLITE_ABORT is
+** returned. Or, if the conflict handler returns an invalid value,
+** SQLITE_MISUSE. If the conflict handler returns SQLITE_CHANGESET_OMIT,
+** this function returns SQLITE_OK.
+*/
+static int sessionConflictHandler(
+ int eType, /* Either CHANGESET_DATA or CONFLICT */
+ SessionApplyCtx *p, /* changeset_apply() context */
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int(*xConflict)(void *, int, sqlite3_changeset_iter*),
+ void *pCtx, /* First argument for conflict handler */
+ int *pbReplace /* OUT: Set to true if PK row is found */
+){
+ int res = 0; /* Value returned by conflict handler */
+ int rc;
+ int nCol;
+ int op;
+ const char *zDummy;
+
+ sqlite3changeset_op(pIter, &zDummy, &nCol, &op, 0);
+
+ assert( eType==SQLITE_CHANGESET_CONFLICT || eType==SQLITE_CHANGESET_DATA );
+ assert( SQLITE_CHANGESET_CONFLICT+1==SQLITE_CHANGESET_CONSTRAINT );
+ assert( SQLITE_CHANGESET_DATA+1==SQLITE_CHANGESET_NOTFOUND );
+
+ /* Bind the new.* PRIMARY KEY values to the SELECT statement. */
+ if( pbReplace ){
+ rc = sessionSeekToRow(p->db, pIter, p->abPK, p->pSelect);
+ }else{
+ rc = SQLITE_OK;
+ }
+
+ if( rc==SQLITE_ROW ){
+ /* There exists another row with the new.* primary key. */
+ pIter->pConflict = p->pSelect;
+ res = xConflict(pCtx, eType, pIter);
+ pIter->pConflict = 0;
+ rc = sqlite3_reset(p->pSelect);
+ }else if( rc==SQLITE_OK ){
+ if( p->bDeferConstraints && eType==SQLITE_CHANGESET_CONFLICT ){
+ /* Instead of invoking the conflict handler, append the change blob
+ ** to the SessionApplyCtx.constraints buffer. */
+ u8 *aBlob = &pIter->in.aData[pIter->in.iCurrent];
+ int nBlob = pIter->in.iNext - pIter->in.iCurrent;
+ sessionAppendBlob(&p->constraints, aBlob, nBlob, &rc);
+ return SQLITE_OK;
+ }else{
+ /* No other row with the new.* primary key. */
+ res = xConflict(pCtx, eType+1, pIter);
+ if( res==SQLITE_CHANGESET_REPLACE ) rc = SQLITE_MISUSE;
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ switch( res ){
+ case SQLITE_CHANGESET_REPLACE:
+ assert( pbReplace );
+ *pbReplace = 1;
+ break;
+
+ case SQLITE_CHANGESET_OMIT:
+ break;
+
+ case SQLITE_CHANGESET_ABORT:
+ rc = SQLITE_ABORT;
+ break;
+
+ default:
+ rc = SQLITE_MISUSE;
+ break;
+ }
+ if( rc==SQLITE_OK ){
+ rc = sessionRebaseAdd(p, res, pIter);
+ }
+ }
+
+ return rc;
+}
+
+/*
+** Attempt to apply the change that the iterator passed as the first argument
+** currently points to to the database. If a conflict is encountered, invoke
+** the conflict handler callback.
+**
+** If argument pbRetry is NULL, then ignore any CHANGESET_DATA conflict. If
+** one is encountered, update or delete the row with the matching primary key
+** instead. Or, if pbRetry is not NULL and a CHANGESET_DATA conflict occurs,
+** invoke the conflict handler. If it returns CHANGESET_REPLACE, set *pbRetry
+** to true before returning. In this case the caller will invoke this function
+** again, this time with pbRetry set to NULL.
+**
+** If argument pbReplace is NULL and a CHANGESET_CONFLICT conflict is
+** encountered invoke the conflict handler with CHANGESET_CONSTRAINT instead.
+** Or, if pbReplace is not NULL, invoke it with CHANGESET_CONFLICT. If such
+** an invocation returns SQLITE_CHANGESET_REPLACE, set *pbReplace to true
+** before retrying. In this case the caller attempts to remove the conflicting
+** row before invoking this function again, this time with pbReplace set
+** to NULL.
+**
+** If any conflict handler returns SQLITE_CHANGESET_ABORT, this function
+** returns SQLITE_ABORT. Otherwise, if no error occurs, SQLITE_OK is
+** returned.
+*/
+static int sessionApplyOneOp(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ SessionApplyCtx *p, /* changeset_apply() context */
+ int(*xConflict)(void *, int, sqlite3_changeset_iter *),
+ void *pCtx, /* First argument for the conflict handler */
+ int *pbReplace, /* OUT: True to remove PK row and retry */
+ int *pbRetry /* OUT: True to retry. */
+){
+ const char *zDummy;
+ int op;
+ int nCol;
+ int rc = SQLITE_OK;
+
+ assert( p->pDelete && p->pUpdate && p->pInsert && p->pSelect );
+ assert( p->azCol && p->abPK );
+ assert( !pbReplace || *pbReplace==0 );
+
+ sqlite3changeset_op(pIter, &zDummy, &nCol, &op, 0);
+
+ if( op==SQLITE_DELETE ){
+
+ /* Bind values to the DELETE statement. If conflict handling is required,
+ ** bind values for all columns and set bound variable (nCol+1) to true.
+ ** Or, if conflict handling is not required, bind just the PK column
+ ** values and, if it exists, set (nCol+1) to false. Conflict handling
+ ** is not required if:
+ **
+ ** * this is a patchset, or
+ ** * (pbRetry==0), or
+ ** * all columns of the table are PK columns (in this case there is
+ ** no (nCol+1) variable to bind to).
+ */
+ u8 *abPK = (pIter->bPatchset ? p->abPK : 0);
+ rc = sessionBindRow(pIter, sqlite3changeset_old, nCol, abPK, p->pDelete);
+ if( rc==SQLITE_OK && sqlite3_bind_parameter_count(p->pDelete)>nCol ){
+ rc = sqlite3_bind_int(p->pDelete, nCol+1, (pbRetry==0 || abPK));
+ }
+ if( rc!=SQLITE_OK ) return rc;
+
+ sqlite3_step(p->pDelete);
+ rc = sqlite3_reset(p->pDelete);
+ if( rc==SQLITE_OK && sqlite3_changes(p->db)==0 ){
+ rc = sessionConflictHandler(
+ SQLITE_CHANGESET_DATA, p, pIter, xConflict, pCtx, pbRetry
+ );
+ }else if( (rc&0xff)==SQLITE_CONSTRAINT ){
+ rc = sessionConflictHandler(
+ SQLITE_CHANGESET_CONFLICT, p, pIter, xConflict, pCtx, 0
+ );
+ }
+
+ }else if( op==SQLITE_UPDATE ){
+ int i;
+
+ /* Bind values to the UPDATE statement. */
+ for(i=0; rc==SQLITE_OK && i<nCol; i++){
+ sqlite3_value *pOld = sessionChangesetOld(pIter, i);
+ sqlite3_value *pNew = sessionChangesetNew(pIter, i);
+
+ sqlite3_bind_int(p->pUpdate, i*3+2, !!pNew);
+ if( pOld ){
+ rc = sessionBindValue(p->pUpdate, i*3+1, pOld);
+ }
+ if( rc==SQLITE_OK && pNew ){
+ rc = sessionBindValue(p->pUpdate, i*3+3, pNew);
+ }
+ }
+ if( rc==SQLITE_OK ){
+ sqlite3_bind_int(p->pUpdate, nCol*3+1, pbRetry==0 || pIter->bPatchset);
+ }
+ if( rc!=SQLITE_OK ) return rc;
+
+ /* Attempt the UPDATE. In the case of a NOTFOUND or DATA conflict,
+ ** the result will be SQLITE_OK with 0 rows modified. */
+ sqlite3_step(p->pUpdate);
+ rc = sqlite3_reset(p->pUpdate);
+
+ if( rc==SQLITE_OK && sqlite3_changes(p->db)==0 ){
+ /* A NOTFOUND or DATA error. Search the table to see if it contains
+ ** a row with a matching primary key. If so, this is a DATA conflict.
+ ** Otherwise, if there is no primary key match, it is a NOTFOUND. */
+
+ rc = sessionConflictHandler(
+ SQLITE_CHANGESET_DATA, p, pIter, xConflict, pCtx, pbRetry
+ );
+
+ }else if( (rc&0xff)==SQLITE_CONSTRAINT ){
+ /* This is always a CONSTRAINT conflict. */
+ rc = sessionConflictHandler(
+ SQLITE_CHANGESET_CONFLICT, p, pIter, xConflict, pCtx, 0
+ );
+ }
+
+ }else{
+ assert( op==SQLITE_INSERT );
+ if( p->bStat1 ){
+ /* Check if there is a conflicting row. For sqlite_stat1, this needs
+ ** to be done using a SELECT, as there is no PRIMARY KEY in the
+ ** database schema to throw an exception if a duplicate is inserted. */
+ rc = sessionSeekToRow(p->db, pIter, p->abPK, p->pSelect);
+ if( rc==SQLITE_ROW ){
+ rc = SQLITE_CONSTRAINT;
+ sqlite3_reset(p->pSelect);
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ rc = sessionBindRow(pIter, sqlite3changeset_new, nCol, 0, p->pInsert);
+ if( rc!=SQLITE_OK ) return rc;
+
+ sqlite3_step(p->pInsert);
+ rc = sqlite3_reset(p->pInsert);
+ }
+
+ if( (rc&0xff)==SQLITE_CONSTRAINT ){
+ rc = sessionConflictHandler(
+ SQLITE_CHANGESET_CONFLICT, p, pIter, xConflict, pCtx, pbReplace
+ );
+ }
+ }
+
+ return rc;
+}
+
+/*
+** Attempt to apply the change that the iterator passed as the first argument
+** currently points to to the database. If a conflict is encountered, invoke
+** the conflict handler callback.
+**
+** The difference between this function and sessionApplyOne() is that this
+** function handles the case where the conflict-handler is invoked and
+** returns SQLITE_CHANGESET_REPLACE - indicating that the change should be
+** retried in some manner.
+*/
+static int sessionApplyOneWithRetry(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ sqlite3_changeset_iter *pIter, /* Changeset iterator to read change from */
+ SessionApplyCtx *pApply, /* Apply context */
+ int(*xConflict)(void*, int, sqlite3_changeset_iter*),
+ void *pCtx /* First argument passed to xConflict */
+){
+ int bReplace = 0;
+ int bRetry = 0;
+ int rc;
+
+ rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, &bReplace, &bRetry);
+ if( rc==SQLITE_OK ){
+ /* If the bRetry flag is set, the change has not been applied due to an
+ ** SQLITE_CHANGESET_DATA problem (i.e. this is an UPDATE or DELETE and
+ ** a row with the correct PK is present in the db, but one or more other
+ ** fields do not contain the expected values) and the conflict handler
+ ** returned SQLITE_CHANGESET_REPLACE. In this case retry the operation,
+ ** but pass NULL as the final argument so that sessionApplyOneOp() ignores
+ ** the SQLITE_CHANGESET_DATA problem. */
+ if( bRetry ){
+ assert( pIter->op==SQLITE_UPDATE || pIter->op==SQLITE_DELETE );
+ rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0);
+ }
+
+ /* If the bReplace flag is set, the change is an INSERT that has not
+ ** been performed because the database already contains a row with the
+ ** specified primary key and the conflict handler returned
+ ** SQLITE_CHANGESET_REPLACE. In this case remove the conflicting row
+ ** before reattempting the INSERT. */
+ else if( bReplace ){
+ assert( pIter->op==SQLITE_INSERT );
+ rc = sqlite3_exec(db, "SAVEPOINT replace_op", 0, 0, 0);
+ if( rc==SQLITE_OK ){
+ rc = sessionBindRow(pIter,
+ sqlite3changeset_new, pApply->nCol, pApply->abPK, pApply->pDelete);
+ sqlite3_bind_int(pApply->pDelete, pApply->nCol+1, 1);
+ }
+ if( rc==SQLITE_OK ){
+ sqlite3_step(pApply->pDelete);
+ rc = sqlite3_reset(pApply->pDelete);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_exec(db, "RELEASE replace_op", 0, 0, 0);
+ }
+ }
+ }
+
+ return rc;
+}
+
+/*
+** Retry the changes accumulated in the pApply->constraints buffer.
+*/
+static int sessionRetryConstraints(
+ sqlite3 *db,
+ int bPatchset,
+ const char *zTab,
+ SessionApplyCtx *pApply,
+ int(*xConflict)(void*, int, sqlite3_changeset_iter*),
+ void *pCtx /* First argument passed to xConflict */
+){
+ int rc = SQLITE_OK;
+
+ while( pApply->constraints.nBuf ){
+ sqlite3_changeset_iter *pIter2 = 0;
+ SessionBuffer cons = pApply->constraints;
+ memset(&pApply->constraints, 0, sizeof(SessionBuffer));
+
+ rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf);
+ if( rc==SQLITE_OK ){
+ int nByte = 2*pApply->nCol*sizeof(sqlite3_value*);
+ int rc2;
+ pIter2->bPatchset = bPatchset;
+ pIter2->zTab = (char*)zTab;
+ pIter2->nCol = pApply->nCol;
+ pIter2->abPK = pApply->abPK;
+ sessionBufferGrow(&pIter2->tblhdr, nByte, &rc);
+ pIter2->apValue = (sqlite3_value**)pIter2->tblhdr.aBuf;
+ if( rc==SQLITE_OK ) memset(pIter2->apValue, 0, nByte);
+
+ while( rc==SQLITE_OK && SQLITE_ROW==sqlite3changeset_next(pIter2) ){
+ rc = sessionApplyOneWithRetry(db, pIter2, pApply, xConflict, pCtx);
+ }
+
+ rc2 = sqlite3changeset_finalize(pIter2);
+ if( rc==SQLITE_OK ) rc = rc2;
+ }
+ assert( pApply->bDeferConstraints || pApply->constraints.nBuf==0 );
+
+ sqlite3_free(cons.aBuf);
+ if( rc!=SQLITE_OK ) break;
+ if( pApply->constraints.nBuf>=cons.nBuf ){
+ /* No progress was made on the last round. */
+ pApply->bDeferConstraints = 0;
+ }
+ }
+
+ return rc;
+}
+
+/*
+** Argument pIter is a changeset iterator that has been initialized, but
+** not yet passed to sqlite3changeset_next(). This function applies the
+** changeset to the main database attached to handle "db". The supplied
+** conflict handler callback is invoked to resolve any conflicts encountered
+** while applying the change.
+*/
+static int sessionChangesetApply(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ sqlite3_changeset_iter *pIter, /* Changeset to apply */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of fifth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase /* OUT: Rebase information */
+){
+ int schemaMismatch = 0;
+ int rc; /* Return code */
+ const char *zTab = 0; /* Name of current table */
+ int nTab = 0; /* Result of sqlite3Strlen30(zTab) */
+ SessionApplyCtx sApply; /* changeset_apply() context object */
+ int bPatchset;
+
+ assert( xConflict!=0 );
+
+ pIter->in.bNoDiscard = 1;
+ memset(&sApply, 0, sizeof(sApply));
+ sqlite3_mutex_enter(sqlite3_db_mutex(db));
+ rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_exec(db, "PRAGMA defer_foreign_keys = 1", 0, 0, 0);
+ }
+ while( rc==SQLITE_OK && SQLITE_ROW==sqlite3changeset_next(pIter) ){
+ int nCol;
+ int op;
+ const char *zNew;
+
+ sqlite3changeset_op(pIter, &zNew, &nCol, &op, 0);
+
+ if( zTab==0 || sqlite3_strnicmp(zNew, zTab, nTab+1) ){
+ u8 *abPK;
+
+ rc = sessionRetryConstraints(
+ db, pIter->bPatchset, zTab, &sApply, xConflict, pCtx
+ );
+ if( rc!=SQLITE_OK ) break;
+
+ sqlite3_free((char*)sApply.azCol); /* cast works around VC++ bug */
+ sqlite3_finalize(sApply.pDelete);
+ sqlite3_finalize(sApply.pUpdate);
+ sqlite3_finalize(sApply.pInsert);
+ sqlite3_finalize(sApply.pSelect);
+ sApply.db = db;
+ sApply.pDelete = 0;
+ sApply.pUpdate = 0;
+ sApply.pInsert = 0;
+ sApply.pSelect = 0;
+ sApply.nCol = 0;
+ sApply.azCol = 0;
+ sApply.abPK = 0;
+ sApply.bStat1 = 0;
+ sApply.bDeferConstraints = 1;
+ sApply.bRebaseStarted = 0;
+ memset(&sApply.constraints, 0, sizeof(SessionBuffer));
+
+ /* If an xFilter() callback was specified, invoke it now. If the
+ ** xFilter callback returns zero, skip this table. If it returns
+ ** non-zero, proceed. */
+ schemaMismatch = (xFilter && (0==xFilter(pCtx, zNew)));
+ if( schemaMismatch ){
+ zTab = sqlite3_mprintf("%s", zNew);
+ if( zTab==0 ){
+ rc = SQLITE_NOMEM;
+ break;
+ }
+ nTab = (int)strlen(zTab);
+ sApply.azCol = (const char **)zTab;
+ }else{
+ int nMinCol = 0;
+ int i;
+
+ sqlite3changeset_pk(pIter, &abPK, 0);
+ rc = sessionTableInfo(
+ db, "main", zNew, &sApply.nCol, &zTab, &sApply.azCol, &sApply.abPK
+ );
+ if( rc!=SQLITE_OK ) break;
+ for(i=0; i<sApply.nCol; i++){
+ if( sApply.abPK[i] ) nMinCol = i+1;
+ }
+
+ if( sApply.nCol==0 ){
+ schemaMismatch = 1;
+ sqlite3_log(SQLITE_SCHEMA,
+ "sqlite3changeset_apply(): no such table: %s", zTab
+ );
+ }
+ else if( sApply.nCol<nCol ){
+ schemaMismatch = 1;
+ sqlite3_log(SQLITE_SCHEMA,
+ "sqlite3changeset_apply(): table %s has %d columns, "
+ "expected %d or more",
+ zTab, sApply.nCol, nCol
+ );
+ }
+ else if( nCol<nMinCol || memcmp(sApply.abPK, abPK, nCol)!=0 ){
+ schemaMismatch = 1;
+ sqlite3_log(SQLITE_SCHEMA, "sqlite3changeset_apply(): "
+ "primary key mismatch for table %s", zTab
+ );
+ }
+ else{
+ sApply.nCol = nCol;
+ if( 0==sqlite3_stricmp(zTab, "sqlite_stat1") ){
+ if( (rc = sessionStat1Sql(db, &sApply) ) ){
+ break;
+ }
+ sApply.bStat1 = 1;
+ }else{
+ if((rc = sessionSelectRow(db, zTab, &sApply))
+ || (rc = sessionUpdateRow(db, zTab, &sApply))
+ || (rc = sessionDeleteRow(db, zTab, &sApply))
+ || (rc = sessionInsertRow(db, zTab, &sApply))
+ ){
+ break;
+ }
+ sApply.bStat1 = 0;
+ }
+ }
+ nTab = sqlite3Strlen30(zTab);
+ }
+ }
+
+ /* If there is a schema mismatch on the current table, proceed to the
+ ** next change. A log message has already been issued. */
+ if( schemaMismatch ) continue;
+
+ rc = sessionApplyOneWithRetry(db, pIter, &sApply, xConflict, pCtx);
+ }
+
+ bPatchset = pIter->bPatchset;
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changeset_finalize(pIter);
+ }else{
+ sqlite3changeset_finalize(pIter);
+ }
+
+ if( rc==SQLITE_OK ){
+ rc = sessionRetryConstraints(db, bPatchset, zTab, &sApply, xConflict, pCtx);
+ }
+
+ if( rc==SQLITE_OK ){
+ int nFk, notUsed;
+ sqlite3_db_status(db, SQLITE_DBSTATUS_DEFERRED_FKS, &nFk, ¬Used, 0);
+ if( nFk!=0 ){
+ int res = SQLITE_CHANGESET_ABORT;
+ sqlite3_changeset_iter sIter;
+ memset(&sIter, 0, sizeof(sIter));
+ sIter.nCol = nFk;
+ res = xConflict(pCtx, SQLITE_CHANGESET_FOREIGN_KEY, &sIter);
+ if( res!=SQLITE_CHANGESET_OMIT ){
+ rc = SQLITE_CONSTRAINT;
+ }
+ }
+ }
+ sqlite3_exec(db, "PRAGMA defer_foreign_keys = 0", 0, 0, 0);
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0);
+ }else{
+ sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0);
+ sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0);
+ }
+
+ if( rc==SQLITE_OK && bPatchset==0 && ppRebase && pnRebase ){
+ *ppRebase = (void*)sApply.rebase.aBuf;
+ *pnRebase = sApply.rebase.nBuf;
+ sApply.rebase.aBuf = 0;
+ }
+ sqlite3_finalize(sApply.pInsert);
+ sqlite3_finalize(sApply.pDelete);
+ sqlite3_finalize(sApply.pUpdate);
+ sqlite3_finalize(sApply.pSelect);
+ sqlite3_free((char*)sApply.azCol); /* cast works around VC++ bug */
+ sqlite3_free((char*)sApply.constraints.aBuf);
+ sqlite3_free((char*)sApply.rebase.aBuf);
+ sqlite3_mutex_leave(sqlite3_db_mutex(db));
+ return rc;
+}
+
+/*
+** Apply the changeset passed via pChangeset/nChangeset to the main
+** database attached to handle "db".
+*/
+SQLITE_API int sqlite3changeset_apply_v2(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase
+){
+ sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */
+ int rc = sqlite3changeset_start(&pIter, nChangeset, pChangeset);
+ if( rc==SQLITE_OK ){
+ rc = sessionChangesetApply(
+ db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase
+ );
+ }
+ return rc;
+}
+
+/*
+** Apply the changeset passed via pChangeset/nChangeset to the main database
+** attached to handle "db". Invoke the supplied conflict handler callback
+** to resolve any conflicts encountered while applying the change.
+*/
+SQLITE_API int sqlite3changeset_apply(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of fifth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+){
+ return sqlite3changeset_apply_v2(
+ db, nChangeset, pChangeset, xFilter, xConflict, pCtx, 0, 0
+ );
+}
+
+/*
+** Apply the changeset passed via xInput/pIn to the main database
+** attached to handle "db". Invoke the supplied conflict handler callback
+** to resolve any conflicts encountered while applying the change.
+*/
+SQLITE_API int sqlite3changeset_apply_v2_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx, /* First argument passed to xConflict */
+ void **ppRebase, int *pnRebase
+){
+ sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */
+ int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn);
+ if( rc==SQLITE_OK ){
+ rc = sessionChangesetApply(
+ db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase
+ );
+ }
+ return rc;
+}
+SQLITE_API int sqlite3changeset_apply_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+){
+ return sqlite3changeset_apply_v2_strm(
+ db, xInput, pIn, xFilter, xConflict, pCtx, 0, 0
+ );
+}
+
+/*
+** sqlite3_changegroup handle.
+*/
+struct sqlite3_changegroup {
+ int rc; /* Error code */
+ int bPatch; /* True to accumulate patchsets */
+ SessionTable *pList; /* List of tables in current patch */
+};
+
+/*
+** This function is called to merge two changes to the same row together as
+** part of an sqlite3changeset_concat() operation. A new change object is
+** allocated and a pointer to it stored in *ppNew.
+*/
+static int sessionChangeMerge(
+ SessionTable *pTab, /* Table structure */
+ int bRebase, /* True for a rebase hash-table */
+ int bPatchset, /* True for patchsets */
+ SessionChange *pExist, /* Existing change */
+ int op2, /* Second change operation */
+ int bIndirect, /* True if second change is indirect */
+ u8 *aRec, /* Second change record */
+ int nRec, /* Number of bytes in aRec */
+ SessionChange **ppNew /* OUT: Merged change */
+){
+ SessionChange *pNew = 0;
+ int rc = SQLITE_OK;
+
+ if( !pExist ){
+ pNew = (SessionChange *)sqlite3_malloc(sizeof(SessionChange) + nRec);
+ if( !pNew ){
+ return SQLITE_NOMEM;
+ }
+ memset(pNew, 0, sizeof(SessionChange));
+ pNew->op = op2;
+ pNew->bIndirect = bIndirect;
+ pNew->aRecord = (u8*)&pNew[1];
+ if( bIndirect==0 || bRebase==0 ){
+ pNew->nRecord = nRec;
+ memcpy(pNew->aRecord, aRec, nRec);
+ }else{
+ int i;
+ u8 *pIn = aRec;
+ u8 *pOut = pNew->aRecord;
+ for(i=0; i<pTab->nCol; i++){
+ int nIn = sessionSerialLen(pIn);
+ if( *pIn==0 ){
+ *pOut++ = 0;
+ }else if( pTab->abPK[i]==0 ){
+ *pOut++ = 0xFF;
+ }else{
+ memcpy(pOut, pIn, nIn);
+ pOut += nIn;
+ }
+ pIn += nIn;
+ }
+ pNew->nRecord = pOut - pNew->aRecord;
+ }
+ }else if( bRebase ){
+ if( pExist->op==SQLITE_DELETE && pExist->bIndirect ){
+ *ppNew = pExist;
+ }else{
+ int nByte = nRec + pExist->nRecord + sizeof(SessionChange);
+ pNew = (SessionChange*)sqlite3_malloc(nByte);
+ if( pNew==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ int i;
+ u8 *a1 = pExist->aRecord;
+ u8 *a2 = aRec;
+ u8 *pOut;
+
+ memset(pNew, 0, nByte);
+ pNew->bIndirect = bIndirect || pExist->bIndirect;
+ pNew->op = op2;
+ pOut = pNew->aRecord = (u8*)&pNew[1];
+
+ for(i=0; i<pTab->nCol; i++){
+ int n1 = sessionSerialLen(a1);
+ int n2 = sessionSerialLen(a2);
+ if( *a1==0xFF || (pTab->abPK[i]==0 && bIndirect) ){
+ *pOut++ = 0xFF;
+ }else if( *a2==0 ){
+ memcpy(pOut, a1, n1);
+ pOut += n1;
+ }else{
+ memcpy(pOut, a2, n2);
+ pOut += n2;
+ }
+ a1 += n1;
+ a2 += n2;
+ }
+ pNew->nRecord = pOut - pNew->aRecord;
+ }
+ sqlite3_free(pExist);
+ }
+ }else{
+ int op1 = pExist->op;
+
+ /*
+ ** op1=INSERT, op2=INSERT -> Unsupported. Discard op2.
+ ** op1=INSERT, op2=UPDATE -> INSERT.
+ ** op1=INSERT, op2=DELETE -> (none)
+ **
+ ** op1=UPDATE, op2=INSERT -> Unsupported. Discard op2.
+ ** op1=UPDATE, op2=UPDATE -> UPDATE.
+ ** op1=UPDATE, op2=DELETE -> DELETE.
+ **
+ ** op1=DELETE, op2=INSERT -> UPDATE.
+ ** op1=DELETE, op2=UPDATE -> Unsupported. Discard op2.
+ ** op1=DELETE, op2=DELETE -> Unsupported. Discard op2.
+ */
+ if( (op1==SQLITE_INSERT && op2==SQLITE_INSERT)
+ || (op1==SQLITE_UPDATE && op2==SQLITE_INSERT)
+ || (op1==SQLITE_DELETE && op2==SQLITE_UPDATE)
+ || (op1==SQLITE_DELETE && op2==SQLITE_DELETE)
+ ){
+ pNew = pExist;
+ }else if( op1==SQLITE_INSERT && op2==SQLITE_DELETE ){
+ sqlite3_free(pExist);
+ assert( pNew==0 );
+ }else{
+ u8 *aExist = pExist->aRecord;
+ int nByte;
+ u8 *aCsr;
+
+ /* Allocate a new SessionChange object. Ensure that the aRecord[]
+ ** buffer of the new object is large enough to hold any record that
+ ** may be generated by combining the input records. */
+ nByte = sizeof(SessionChange) + pExist->nRecord + nRec;
+ pNew = (SessionChange *)sqlite3_malloc(nByte);
+ if( !pNew ){
+ sqlite3_free(pExist);
+ return SQLITE_NOMEM;
+ }
+ memset(pNew, 0, sizeof(SessionChange));
+ pNew->bIndirect = (bIndirect && pExist->bIndirect);
+ aCsr = pNew->aRecord = (u8 *)&pNew[1];
+
+ if( op1==SQLITE_INSERT ){ /* INSERT + UPDATE */
+ u8 *a1 = aRec;
+ assert( op2==SQLITE_UPDATE );
+ pNew->op = SQLITE_INSERT;
+ if( bPatchset==0 ) sessionSkipRecord(&a1, pTab->nCol);
+ sessionMergeRecord(&aCsr, pTab->nCol, aExist, a1);
+ }else if( op1==SQLITE_DELETE ){ /* DELETE + INSERT */
+ assert( op2==SQLITE_INSERT );
+ pNew->op = SQLITE_UPDATE;
+ if( bPatchset ){
+ memcpy(aCsr, aRec, nRec);
+ aCsr += nRec;
+ }else{
+ if( 0==sessionMergeUpdate(&aCsr, pTab, bPatchset, aExist, 0,aRec,0) ){
+ sqlite3_free(pNew);
+ pNew = 0;
+ }
+ }
+ }else if( op2==SQLITE_UPDATE ){ /* UPDATE + UPDATE */
+ u8 *a1 = aExist;
+ u8 *a2 = aRec;
+ assert( op1==SQLITE_UPDATE );
+ if( bPatchset==0 ){
+ sessionSkipRecord(&a1, pTab->nCol);
+ sessionSkipRecord(&a2, pTab->nCol);
+ }
+ pNew->op = SQLITE_UPDATE;
+ if( 0==sessionMergeUpdate(&aCsr, pTab, bPatchset, aRec, aExist,a1,a2) ){
+ sqlite3_free(pNew);
+ pNew = 0;
+ }
+ }else{ /* UPDATE + DELETE */
+ assert( op1==SQLITE_UPDATE && op2==SQLITE_DELETE );
+ pNew->op = SQLITE_DELETE;
+ if( bPatchset ){
+ memcpy(aCsr, aRec, nRec);
+ aCsr += nRec;
+ }else{
+ sessionMergeRecord(&aCsr, pTab->nCol, aRec, aExist);
+ }
+ }
+
+ if( pNew ){
+ pNew->nRecord = (int)(aCsr - pNew->aRecord);
+ }
+ sqlite3_free(pExist);
+ }
+ }
+
+ *ppNew = pNew;
+ return rc;
+}
+
+/*
+** Add all changes in the changeset traversed by the iterator passed as
+** the first argument to the changegroup hash tables.
+*/
+static int sessionChangesetToHash(
+ sqlite3_changeset_iter *pIter, /* Iterator to read from */
+ sqlite3_changegroup *pGrp, /* Changegroup object to add changeset to */
+ int bRebase /* True if hash table is for rebasing */
+){
+ u8 *aRec;
+ int nRec;
+ int rc = SQLITE_OK;
+ SessionTable *pTab = 0;
+
+ while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, 0) ){
+ const char *zNew;
+ int nCol;
+ int op;
+ int iHash;
+ int bIndirect;
+ SessionChange *pChange;
+ SessionChange *pExist = 0;
+ SessionChange **pp;
+
+ if( pGrp->pList==0 ){
+ pGrp->bPatch = pIter->bPatchset;
+ }else if( pIter->bPatchset!=pGrp->bPatch ){
+ rc = SQLITE_ERROR;
+ break;
+ }
+
+ sqlite3changeset_op(pIter, &zNew, &nCol, &op, &bIndirect);
+ if( !pTab || sqlite3_stricmp(zNew, pTab->zName) ){
+ /* Search the list for a matching table */
+ int nNew = (int)strlen(zNew);
+ u8 *abPK;
+
+ sqlite3changeset_pk(pIter, &abPK, 0);
+ for(pTab = pGrp->pList; pTab; pTab=pTab->pNext){
+ if( 0==sqlite3_strnicmp(pTab->zName, zNew, nNew+1) ) break;
+ }
+ if( !pTab ){
+ SessionTable **ppTab;
+
+ pTab = sqlite3_malloc(sizeof(SessionTable) + nCol + nNew+1);
+ if( !pTab ){
+ rc = SQLITE_NOMEM;
+ break;
+ }
+ memset(pTab, 0, sizeof(SessionTable));
+ pTab->nCol = nCol;
+ pTab->abPK = (u8*)&pTab[1];
+ memcpy(pTab->abPK, abPK, nCol);
+ pTab->zName = (char*)&pTab->abPK[nCol];
+ memcpy(pTab->zName, zNew, nNew+1);
+
+ /* The new object must be linked on to the end of the list, not
+ ** simply added to the start of it. This is to ensure that the
+ ** tables within the output of sqlite3changegroup_output() are in
+ ** the right order. */
+ for(ppTab=&pGrp->pList; *ppTab; ppTab=&(*ppTab)->pNext);
+ *ppTab = pTab;
+ }else if( pTab->nCol!=nCol || memcmp(pTab->abPK, abPK, nCol) ){
+ rc = SQLITE_SCHEMA;
+ break;
+ }
+ }
+
+ if( sessionGrowHash(pIter->bPatchset, pTab) ){
+ rc = SQLITE_NOMEM;
+ break;
+ }
+ iHash = sessionChangeHash(
+ pTab, (pIter->bPatchset && op==SQLITE_DELETE), aRec, pTab->nChange
+ );
+
+ /* Search for existing entry. If found, remove it from the hash table.
+ ** Code below may link it back in.
+ */
+ for(pp=&pTab->apChange[iHash]; *pp; pp=&(*pp)->pNext){
+ int bPkOnly1 = 0;
+ int bPkOnly2 = 0;
+ if( pIter->bPatchset ){
+ bPkOnly1 = (*pp)->op==SQLITE_DELETE;
+ bPkOnly2 = op==SQLITE_DELETE;
+ }
+ if( sessionChangeEqual(pTab, bPkOnly1, (*pp)->aRecord, bPkOnly2, aRec) ){
+ pExist = *pp;
+ *pp = (*pp)->pNext;
+ pTab->nEntry--;
+ break;
+ }
+ }
+
+ rc = sessionChangeMerge(pTab, bRebase,
+ pIter->bPatchset, pExist, op, bIndirect, aRec, nRec, &pChange
+ );
+ if( rc ) break;
+ if( pChange ){
+ pChange->pNext = pTab->apChange[iHash];
+ pTab->apChange[iHash] = pChange;
+ pTab->nEntry++;
+ }
+ }
+
+ if( rc==SQLITE_OK ) rc = pIter->rc;
+ return rc;
+}
+
+/*
+** Serialize a changeset (or patchset) based on all changesets (or patchsets)
+** added to the changegroup object passed as the first argument.
+**
+** If xOutput is not NULL, then the changeset/patchset is returned to the
+** user via one or more calls to xOutput, as with the other streaming
+** interfaces.
+**
+** Or, if xOutput is NULL, then (*ppOut) is populated with a pointer to a
+** buffer containing the output changeset before this function returns. In
+** this case (*pnOut) is set to the size of the output buffer in bytes. It
+** is the responsibility of the caller to free the output buffer using
+** sqlite3_free() when it is no longer required.
+**
+** If successful, SQLITE_OK is returned. Or, if an error occurs, an SQLite
+** error code. If an error occurs and xOutput is NULL, (*ppOut) and (*pnOut)
+** are both set to 0 before returning.
+*/
+static int sessionChangegroupOutput(
+ sqlite3_changegroup *pGrp,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut,
+ int *pnOut,
+ void **ppOut
+){
+ int rc = SQLITE_OK;
+ SessionBuffer buf = {0, 0, 0};
+ SessionTable *pTab;
+ assert( xOutput==0 || (ppOut==0 && pnOut==0) );
+
+ /* Create the serialized output changeset based on the contents of the
+ ** hash tables attached to the SessionTable objects in list p->pList.
+ */
+ for(pTab=pGrp->pList; rc==SQLITE_OK && pTab; pTab=pTab->pNext){
+ int i;
+ if( pTab->nEntry==0 ) continue;
+
+ sessionAppendTableHdr(&buf, pGrp->bPatch, pTab, &rc);
+ for(i=0; i<pTab->nChange; i++){
+ SessionChange *p;
+ for(p=pTab->apChange[i]; p; p=p->pNext){
+ sessionAppendByte(&buf, p->op, &rc);
+ sessionAppendByte(&buf, p->bIndirect, &rc);
+ sessionAppendBlob(&buf, p->aRecord, p->nRecord, &rc);
+ }
+ }
+
+ if( rc==SQLITE_OK && xOutput && buf.nBuf>=SESSIONS_STRM_CHUNK_SIZE ){
+ rc = xOutput(pOut, buf.aBuf, buf.nBuf);
+ buf.nBuf = 0;
+ }
+ }
+
+ if( rc==SQLITE_OK ){
+ if( xOutput ){
+ if( buf.nBuf>0 ) rc = xOutput(pOut, buf.aBuf, buf.nBuf);
+ }else{
+ *ppOut = buf.aBuf;
+ *pnOut = buf.nBuf;
+ buf.aBuf = 0;
+ }
+ }
+ sqlite3_free(buf.aBuf);
+
+ return rc;
+}
+
+/*
+** Allocate a new, empty, sqlite3_changegroup.
+*/
+SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp){
+ int rc = SQLITE_OK; /* Return code */
+ sqlite3_changegroup *p; /* New object */
+ p = (sqlite3_changegroup*)sqlite3_malloc(sizeof(sqlite3_changegroup));
+ if( p==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ memset(p, 0, sizeof(sqlite3_changegroup));
+ }
+ *pp = p;
+ return rc;
+}
+
+/*
+** Add the changeset currently stored in buffer pData, size nData bytes,
+** to changeset-group p.
+*/
+SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup *pGrp, int nData, void *pData){
+ sqlite3_changeset_iter *pIter; /* Iterator opened on pData/nData */
+ int rc; /* Return code */
+
+ rc = sqlite3changeset_start(&pIter, nData, pData);
+ if( rc==SQLITE_OK ){
+ rc = sessionChangesetToHash(pIter, pGrp, 0);
+ }
+ sqlite3changeset_finalize(pIter);
+ return rc;
+}
+
+/*
+** Obtain a buffer containing a changeset representing the concatenation
+** of all changesets added to the group so far.
+*/
+SQLITE_API int sqlite3changegroup_output(
+ sqlite3_changegroup *pGrp,
+ int *pnData,
+ void **ppData
+){
+ return sessionChangegroupOutput(pGrp, 0, 0, pnData, ppData);
+}
+
+/*
+** Streaming versions of changegroup_add().
+*/
+SQLITE_API int sqlite3changegroup_add_strm(
+ sqlite3_changegroup *pGrp,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+){
+ sqlite3_changeset_iter *pIter; /* Iterator opened on pData/nData */
+ int rc; /* Return code */
+
+ rc = sqlite3changeset_start_strm(&pIter, xInput, pIn);
+ if( rc==SQLITE_OK ){
+ rc = sessionChangesetToHash(pIter, pGrp, 0);
+ }
+ sqlite3changeset_finalize(pIter);
+ return rc;
+}
+
+/*
+** Streaming versions of changegroup_output().
+*/
+SQLITE_API int sqlite3changegroup_output_strm(
+ sqlite3_changegroup *pGrp,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ return sessionChangegroupOutput(pGrp, xOutput, pOut, 0, 0);
+}
+
+/*
+** Delete a changegroup object.
+*/
+SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup *pGrp){
+ if( pGrp ){
+ sessionDeleteTable(pGrp->pList);
+ sqlite3_free(pGrp);
+ }
+}
+
+/*
+** Combine two changesets together.
+*/
+SQLITE_API int sqlite3changeset_concat(
+ int nLeft, /* Number of bytes in lhs input */
+ void *pLeft, /* Lhs input changeset */
+ int nRight /* Number of bytes in rhs input */,
+ void *pRight, /* Rhs input changeset */
+ int *pnOut, /* OUT: Number of bytes in output changeset */
+ void **ppOut /* OUT: changeset (left <concat> right) */
+){
+ sqlite3_changegroup *pGrp;
+ int rc;
+
+ rc = sqlite3changegroup_new(&pGrp);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_add(pGrp, nLeft, pLeft);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_add(pGrp, nRight, pRight);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+ }
+ sqlite3changegroup_delete(pGrp);
+
+ return rc;
+}
+
+/*
+** Streaming version of sqlite3changeset_concat().
+*/
+SQLITE_API int sqlite3changeset_concat_strm(
+ int (*xInputA)(void *pIn, void *pData, int *pnData),
+ void *pInA,
+ int (*xInputB)(void *pIn, void *pData, int *pnData),
+ void *pInB,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ sqlite3_changegroup *pGrp;
+ int rc;
+
+ rc = sqlite3changegroup_new(&pGrp);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_add_strm(pGrp, xInputA, pInA);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_add_strm(pGrp, xInputB, pInB);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3changegroup_output_strm(pGrp, xOutput, pOut);
+ }
+ sqlite3changegroup_delete(pGrp);
+
+ return rc;
+}
+
+/*
+** Changeset rebaser handle.
+*/
+struct sqlite3_rebaser {
+ sqlite3_changegroup grp; /* Hash table */
+};
+
+/*
+** Buffers a1 and a2 must both contain a sessions module record nCol
+** fields in size. This function appends an nCol sessions module
+** record to buffer pBuf that is a copy of a1, except that for
+** each field that is undefined in a1[], swap in the field from a2[].
+*/
+static void sessionAppendRecordMerge(
+ SessionBuffer *pBuf, /* Buffer to append to */
+ int nCol, /* Number of columns in each record */
+ u8 *a1, int n1, /* Record 1 */
+ u8 *a2, int n2, /* Record 2 */
+ int *pRc /* IN/OUT: error code */
+){
+ sessionBufferGrow(pBuf, n1+n2, pRc);
+ if( *pRc==SQLITE_OK ){
+ int i;
+ u8 *pOut = &pBuf->aBuf[pBuf->nBuf];
+ for(i=0; i<nCol; i++){
+ int nn1 = sessionSerialLen(a1);
+ int nn2 = sessionSerialLen(a2);
+ if( *a1==0 || *a1==0xFF ){
+ memcpy(pOut, a2, nn2);
+ pOut += nn2;
+ }else{
+ memcpy(pOut, a1, nn1);
+ pOut += nn1;
+ }
+ a1 += nn1;
+ a2 += nn2;
+ }
+
+ pBuf->nBuf = pOut-pBuf->aBuf;
+ assert( pBuf->nBuf<=pBuf->nAlloc );
+ }
+}
+
+/*
+** This function is called when rebasing a local UPDATE change against one
+** or more remote UPDATE changes. The aRec/nRec buffer contains the current
+** old.* and new.* records for the change. The rebase buffer (a single
+** record) is in aChange/nChange. The rebased change is appended to buffer
+** pBuf.
+**
+** Rebasing the UPDATE involves:
+**
+** * Removing any changes to fields for which the corresponding field
+** in the rebase buffer is set to "replaced" (type 0xFF). If this
+** means the UPDATE change updates no fields, nothing is appended
+** to the output buffer.
+**
+** * For each field modified by the local change for which the
+** corresponding field in the rebase buffer is not "undefined" (0x00)
+** or "replaced" (0xFF), the old.* value is replaced by the value
+** in the rebase buffer.
+*/
+static void sessionAppendPartialUpdate(
+ SessionBuffer *pBuf, /* Append record here */
+ sqlite3_changeset_iter *pIter, /* Iterator pointed at local change */
+ u8 *aRec, int nRec, /* Local change */
+ u8 *aChange, int nChange, /* Record to rebase against */
+ int *pRc /* IN/OUT: Return Code */
+){
+ sessionBufferGrow(pBuf, 2+nRec+nChange, pRc);
+ if( *pRc==SQLITE_OK ){
+ int bData = 0;
+ u8 *pOut = &pBuf->aBuf[pBuf->nBuf];
+ int i;
+ u8 *a1 = aRec;
+ u8 *a2 = aChange;
+
+ *pOut++ = SQLITE_UPDATE;
+ *pOut++ = pIter->bIndirect;
+ for(i=0; i<pIter->nCol; i++){
+ int n1 = sessionSerialLen(a1);
+ int n2 = sessionSerialLen(a2);
+ if( pIter->abPK[i] || a2[0]==0 ){
+ if( !pIter->abPK[i] ) bData = 1;
+ memcpy(pOut, a1, n1);
+ pOut += n1;
+ }else if( a2[0]!=0xFF ){
+ bData = 1;
+ memcpy(pOut, a2, n2);
+ pOut += n2;
+ }else{
+ *pOut++ = '\0';
+ }
+ a1 += n1;
+ a2 += n2;
+ }
+ if( bData ){
+ a2 = aChange;
+ for(i=0; i<pIter->nCol; i++){
+ int n1 = sessionSerialLen(a1);
+ int n2 = sessionSerialLen(a2);
+ if( pIter->abPK[i] || a2[0]!=0xFF ){
+ memcpy(pOut, a1, n1);
+ pOut += n1;
+ }else{
+ *pOut++ = '\0';
+ }
+ a1 += n1;
+ a2 += n2;
+ }
+ pBuf->nBuf = (pOut - pBuf->aBuf);
+ }
+ }
+}
+
+/*
+** pIter is configured to iterate through a changeset. This function rebases
+** that changeset according to the current configuration of the rebaser
+** object passed as the first argument. If no error occurs and argument xOutput
+** is not NULL, then the changeset is returned to the caller by invoking
+** xOutput zero or more times and SQLITE_OK returned. Or, if xOutput is NULL,
+** then (*ppOut) is set to point to a buffer containing the rebased changeset
+** before this function returns. In this case (*pnOut) is set to the size of
+** the buffer in bytes. It is the responsibility of the caller to eventually
+** free the (*ppOut) buffer using sqlite3_free().
+**
+** If an error occurs, an SQLite error code is returned. If ppOut and
+** pnOut are not NULL, then the two output parameters are set to 0 before
+** returning.
+*/
+static int sessionRebase(
+ sqlite3_rebaser *p, /* Rebaser hash table */
+ sqlite3_changeset_iter *pIter, /* Input data */
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut, /* Context for xOutput callback */
+ int *pnOut, /* OUT: Number of bytes in output changeset */
+ void **ppOut /* OUT: Inverse of pChangeset */
+){
+ int rc = SQLITE_OK;
+ u8 *aRec = 0;
+ int nRec = 0;
+ int bNew = 0;
+ SessionTable *pTab = 0;
+ SessionBuffer sOut = {0,0,0};
+
+ while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, &bNew) ){
+ SessionChange *pChange = 0;
+ int bDone = 0;
+
+ if( bNew ){
+ const char *zTab = pIter->zTab;
+ for(pTab=p->grp.pList; pTab; pTab=pTab->pNext){
+ if( 0==sqlite3_stricmp(pTab->zName, zTab) ) break;
+ }
+ bNew = 0;
+
+ /* A patchset may not be rebased */
+ if( pIter->bPatchset ){
+ rc = SQLITE_ERROR;
+ }
+
+ /* Append a table header to the output for this new table */
+ sessionAppendByte(&sOut, pIter->bPatchset ? 'P' : 'T', &rc);
+ sessionAppendVarint(&sOut, pIter->nCol, &rc);
+ sessionAppendBlob(&sOut, pIter->abPK, pIter->nCol, &rc);
+ sessionAppendBlob(&sOut,(u8*)pIter->zTab,(int)strlen(pIter->zTab)+1,&rc);
+ }
+
+ if( pTab && rc==SQLITE_OK ){
+ int iHash = sessionChangeHash(pTab, 0, aRec, pTab->nChange);
+
+ for(pChange=pTab->apChange[iHash]; pChange; pChange=pChange->pNext){
+ if( sessionChangeEqual(pTab, 0, aRec, 0, pChange->aRecord) ){
+ break;
+ }
+ }
+ }
+
+ if( pChange ){
+ assert( pChange->op==SQLITE_DELETE || pChange->op==SQLITE_INSERT );
+ switch( pIter->op ){
+ case SQLITE_INSERT:
+ if( pChange->op==SQLITE_INSERT ){
+ bDone = 1;
+ if( pChange->bIndirect==0 ){
+ sessionAppendByte(&sOut, SQLITE_UPDATE, &rc);
+ sessionAppendByte(&sOut, pIter->bIndirect, &rc);
+ sessionAppendBlob(&sOut, pChange->aRecord, pChange->nRecord, &rc);
+ sessionAppendBlob(&sOut, aRec, nRec, &rc);
+ }
+ }
+ break;
+
+ case SQLITE_UPDATE:
+ bDone = 1;
+ if( pChange->op==SQLITE_DELETE ){
+ if( pChange->bIndirect==0 ){
+ u8 *pCsr = aRec;
+ sessionSkipRecord(&pCsr, pIter->nCol);
+ sessionAppendByte(&sOut, SQLITE_INSERT, &rc);
+ sessionAppendByte(&sOut, pIter->bIndirect, &rc);
+ sessionAppendRecordMerge(&sOut, pIter->nCol,
+ pCsr, nRec-(pCsr-aRec),
+ pChange->aRecord, pChange->nRecord, &rc
+ );
+ }
+ }else{
+ sessionAppendPartialUpdate(&sOut, pIter,
+ aRec, nRec, pChange->aRecord, pChange->nRecord, &rc
+ );
+ }
+ break;
+
+ default:
+ assert( pIter->op==SQLITE_DELETE );
+ bDone = 1;
+ if( pChange->op==SQLITE_INSERT ){
+ sessionAppendByte(&sOut, SQLITE_DELETE, &rc);
+ sessionAppendByte(&sOut, pIter->bIndirect, &rc);
+ sessionAppendRecordMerge(&sOut, pIter->nCol,
+ pChange->aRecord, pChange->nRecord, aRec, nRec, &rc
+ );
+ }
+ break;
+ }
+ }
+
+ if( bDone==0 ){
+ sessionAppendByte(&sOut, pIter->op, &rc);
+ sessionAppendByte(&sOut, pIter->bIndirect, &rc);
+ sessionAppendBlob(&sOut, aRec, nRec, &rc);
+ }
+ if( rc==SQLITE_OK && xOutput && sOut.nBuf>SESSIONS_STRM_CHUNK_SIZE ){
+ rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
+ sOut.nBuf = 0;
+ }
+ if( rc ) break;
+ }
+
+ if( rc!=SQLITE_OK ){
+ sqlite3_free(sOut.aBuf);
+ memset(&sOut, 0, sizeof(sOut));
+ }
+
+ if( rc==SQLITE_OK ){
+ if( xOutput ){
+ if( sOut.nBuf>0 ){
+ rc = xOutput(pOut, sOut.aBuf, sOut.nBuf);
+ }
+ }else{
+ *ppOut = (void*)sOut.aBuf;
+ *pnOut = sOut.nBuf;
+ sOut.aBuf = 0;
+ }
+ }
+ sqlite3_free(sOut.aBuf);
+ return rc;
+}
+
+/*
+** Create a new rebaser object.
+*/
+SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew){
+ int rc = SQLITE_OK;
+ sqlite3_rebaser *pNew;
+
+ pNew = sqlite3_malloc(sizeof(sqlite3_rebaser));
+ if( pNew==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ memset(pNew, 0, sizeof(sqlite3_rebaser));
+ }
+ *ppNew = pNew;
+ return rc;
+}
+
+/*
+** Call this one or more times to configure a rebaser.
+*/
+SQLITE_API int sqlite3rebaser_configure(
+ sqlite3_rebaser *p,
+ int nRebase, const void *pRebase
+){
+ sqlite3_changeset_iter *pIter = 0; /* Iterator opened on pData/nData */
+ int rc; /* Return code */
+ rc = sqlite3changeset_start(&pIter, nRebase, (void*)pRebase);
+ if( rc==SQLITE_OK ){
+ rc = sessionChangesetToHash(pIter, &p->grp, 1);
+ }
+ sqlite3changeset_finalize(pIter);
+ return rc;
+}
+
+/*
+** Rebase a changeset according to current rebaser configuration
+*/
+SQLITE_API int sqlite3rebaser_rebase(
+ sqlite3_rebaser *p,
+ int nIn, const void *pIn,
+ int *pnOut, void **ppOut
+){
+ sqlite3_changeset_iter *pIter = 0; /* Iterator to skip through input */
+ int rc = sqlite3changeset_start(&pIter, nIn, (void*)pIn);
+
+ if( rc==SQLITE_OK ){
+ rc = sessionRebase(p, pIter, 0, 0, pnOut, ppOut);
+ sqlite3changeset_finalize(pIter);
+ }
+
+ return rc;
+}
+
+/*
+** Rebase a changeset according to current rebaser configuration
+*/
+SQLITE_API int sqlite3rebaser_rebase_strm(
+ sqlite3_rebaser *p,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+){
+ sqlite3_changeset_iter *pIter = 0; /* Iterator to skip through input */
+ int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn);
+
+ if( rc==SQLITE_OK ){
+ rc = sessionRebase(p, pIter, xOutput, pOut, 0, 0);
+ sqlite3changeset_finalize(pIter);
+ }
+
+ return rc;
+}
+
+/*
+** Destroy a rebaser object
+*/
+SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p){
+ if( p ){
+ sessionDeleteTable(p->grp.pList);
+ sqlite3_free(p);
+ }
+}
+
+#endif /* SQLITE_ENABLE_SESSION && SQLITE_ENABLE_PREUPDATE_HOOK */
+
+/************** End of sqlite3session.c **************************************/
+/************** Begin file json1.c *******************************************/
+/*
+** 2015-08-12
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This SQLite extension implements JSON functions. The interface is
+** modeled after MySQL JSON functions:
+**
+** https://dev.mysql.com/doc/refman/5.7/en/json.html
+**
+** For the time being, all JSON is stored as pure text. (We might add
+** a JSONB type in the future which stores a binary encoding of JSON in
+** a BLOB, but there is no support for JSONB in the current implementation.
+** This implementation parses JSON text at 250 MB/s, so it is hard to see
+** how JSONB might improve on that.)
+*/
+#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_JSON1)
+#if !defined(SQLITEINT_H)
+/* #include "sqlite3ext.h" */
+#endif
+SQLITE_EXTENSION_INIT1
+/* #include <assert.h> */
+/* #include <string.h> */
+/* #include <stdlib.h> */
+/* #include <stdarg.h> */
+
+/* Mark a function parameter as unused, to suppress nuisance compiler
+** warnings. */
+#ifndef UNUSED_PARAM
+# define UNUSED_PARAM(X) (void)(X)
+#endif
+
+#ifndef LARGEST_INT64
+# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32))
+# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64)
+#endif
+
+/*
+** Versions of isspace(), isalnum() and isdigit() to which it is safe
+** to pass signed char values.
+*/
+#ifdef sqlite3Isdigit
+ /* Use the SQLite core versions if this routine is part of the
+ ** SQLite amalgamation */
+# define safe_isdigit(x) sqlite3Isdigit(x)
+# define safe_isalnum(x) sqlite3Isalnum(x)
+# define safe_isxdigit(x) sqlite3Isxdigit(x)
+#else
+ /* Use the standard library for separate compilation */
+#include <ctype.h> /* amalgamator: keep */
+# define safe_isdigit(x) isdigit((unsigned char)(x))
+# define safe_isalnum(x) isalnum((unsigned char)(x))
+# define safe_isxdigit(x) isxdigit((unsigned char)(x))
+#endif
+
+/*
+** Growing our own isspace() routine this way is twice as fast as
+** the library isspace() function, resulting in a 7% overall performance
+** increase for the parser. (Ubuntu14.10 gcc 4.8.4 x64 with -Os).
+*/
+static const char jsonIsSpace[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+};
+#define safe_isspace(x) (jsonIsSpace[(unsigned char)x])
+
+#ifndef SQLITE_AMALGAMATION
+ /* Unsigned integer types. These are already defined in the sqliteInt.h,
+ ** but the definitions need to be repeated for separate compilation. */
+ typedef sqlite3_uint64 u64;
+ typedef unsigned int u32;
+ typedef unsigned short int u16;
+ typedef unsigned char u8;
+#endif
+
+/* Objects */
+typedef struct JsonString JsonString;
+typedef struct JsonNode JsonNode;
+typedef struct JsonParse JsonParse;
+
+/* An instance of this object represents a JSON string
+** under construction. Really, this is a generic string accumulator
+** that can be and is used to create strings other than JSON.
+*/
+struct JsonString {
+ sqlite3_context *pCtx; /* Function context - put error messages here */
+ char *zBuf; /* Append JSON content here */
+ u64 nAlloc; /* Bytes of storage available in zBuf[] */
+ u64 nUsed; /* Bytes of zBuf[] currently used */
+ u8 bStatic; /* True if zBuf is static space */
+ u8 bErr; /* True if an error has been encountered */
+ char zSpace[100]; /* Initial static space */
+};
+
+/* JSON type values
+*/
+#define JSON_NULL 0
+#define JSON_TRUE 1
+#define JSON_FALSE 2
+#define JSON_INT 3
+#define JSON_REAL 4
+#define JSON_STRING 5
+#define JSON_ARRAY 6
+#define JSON_OBJECT 7
+
+/* The "subtype" set for JSON values */
+#define JSON_SUBTYPE 74 /* Ascii for "J" */
+
+/*
+** Names of the various JSON types:
+*/
+static const char * const jsonType[] = {
+ "null", "true", "false", "integer", "real", "text", "array", "object"
+};
+
+/* Bit values for the JsonNode.jnFlag field
+*/
+#define JNODE_RAW 0x01 /* Content is raw, not JSON encoded */
+#define JNODE_ESCAPE 0x02 /* Content is text with \ escapes */
+#define JNODE_REMOVE 0x04 /* Do not output */
+#define JNODE_REPLACE 0x08 /* Replace with JsonNode.u.iReplace */
+#define JNODE_PATCH 0x10 /* Patch with JsonNode.u.pPatch */
+#define JNODE_APPEND 0x20 /* More ARRAY/OBJECT entries at u.iAppend */
+#define JNODE_LABEL 0x40 /* Is a label of an object */
+
+
+/* A single node of parsed JSON
+*/
+struct JsonNode {
+ u8 eType; /* One of the JSON_ type values */
+ u8 jnFlags; /* JNODE flags */
+ u32 n; /* Bytes of content, or number of sub-nodes */
+ union {
+ const char *zJContent; /* Content for INT, REAL, and STRING */
+ u32 iAppend; /* More terms for ARRAY and OBJECT */
+ u32 iKey; /* Key for ARRAY objects in json_tree() */
+ u32 iReplace; /* Replacement content for JNODE_REPLACE */
+ JsonNode *pPatch; /* Node chain of patch for JNODE_PATCH */
+ } u;
+};
+
+/* A completely parsed JSON string
+*/
+struct JsonParse {
+ u32 nNode; /* Number of slots of aNode[] used */
+ u32 nAlloc; /* Number of slots of aNode[] allocated */
+ JsonNode *aNode; /* Array of nodes containing the parse */
+ const char *zJson; /* Original JSON string */
+ u32 *aUp; /* Index of parent of each node */
+ u8 oom; /* Set to true if out of memory */
+ u8 nErr; /* Number of errors seen */
+ u16 iDepth; /* Nesting depth */
+ int nJson; /* Length of the zJson string in bytes */
+};
+
+/*
+** Maximum nesting depth of JSON for this implementation.
+**
+** This limit is needed to avoid a stack overflow in the recursive
+** descent parser. A depth of 2000 is far deeper than any sane JSON
+** should go.
+*/
+#define JSON_MAX_DEPTH 2000
+
+/**************************************************************************
+** Utility routines for dealing with JsonString objects
+**************************************************************************/
+
+/* Set the JsonString object to an empty string
+*/
+static void jsonZero(JsonString *p){
+ p->zBuf = p->zSpace;
+ p->nAlloc = sizeof(p->zSpace);
+ p->nUsed = 0;
+ p->bStatic = 1;
+}
+
+/* Initialize the JsonString object
+*/
+static void jsonInit(JsonString *p, sqlite3_context *pCtx){
+ p->pCtx = pCtx;
+ p->bErr = 0;
+ jsonZero(p);
+}
+
+
+/* Free all allocated memory and reset the JsonString object back to its
+** initial state.
+*/
+static void jsonReset(JsonString *p){
+ if( !p->bStatic ) sqlite3_free(p->zBuf);
+ jsonZero(p);
+}
+
+
+/* Report an out-of-memory (OOM) condition
+*/
+static void jsonOom(JsonString *p){
+ p->bErr = 1;
+ sqlite3_result_error_nomem(p->pCtx);
+ jsonReset(p);
+}
+
+/* Enlarge pJson->zBuf so that it can hold at least N more bytes.
+** Return zero on success. Return non-zero on an OOM error
+*/
+static int jsonGrow(JsonString *p, u32 N){
+ u64 nTotal = N<p->nAlloc ? p->nAlloc*2 : p->nAlloc+N+10;
+ char *zNew;
+ if( p->bStatic ){
+ if( p->bErr ) return 1;
+ zNew = sqlite3_malloc64(nTotal);
+ if( zNew==0 ){
+ jsonOom(p);
+ return SQLITE_NOMEM;
+ }
+ memcpy(zNew, p->zBuf, (size_t)p->nUsed);
+ p->zBuf = zNew;
+ p->bStatic = 0;
+ }else{
+ zNew = sqlite3_realloc64(p->zBuf, nTotal);
+ if( zNew==0 ){
+ jsonOom(p);
+ return SQLITE_NOMEM;
+ }
+ p->zBuf = zNew;
+ }
+ p->nAlloc = nTotal;
+ return SQLITE_OK;
+}
+
+/* Append N bytes from zIn onto the end of the JsonString string.
+*/
+static void jsonAppendRaw(JsonString *p, const char *zIn, u32 N){
+ if( (N+p->nUsed >= p->nAlloc) && jsonGrow(p,N)!=0 ) return;
+ memcpy(p->zBuf+p->nUsed, zIn, N);
+ p->nUsed += N;
+}
+
+/* Append formatted text (not to exceed N bytes) to the JsonString.
+*/
+static void jsonPrintf(int N, JsonString *p, const char *zFormat, ...){
+ va_list ap;
+ if( (p->nUsed + N >= p->nAlloc) && jsonGrow(p, N) ) return;
+ va_start(ap, zFormat);
+ sqlite3_vsnprintf(N, p->zBuf+p->nUsed, zFormat, ap);
+ va_end(ap);
+ p->nUsed += (int)strlen(p->zBuf+p->nUsed);
+}
+
+/* Append a single character
+*/
+static void jsonAppendChar(JsonString *p, char c){
+ if( p->nUsed>=p->nAlloc && jsonGrow(p,1)!=0 ) return;
+ p->zBuf[p->nUsed++] = c;
+}
+
+/* Append a comma separator to the output buffer, if the previous
+** character is not '[' or '{'.
+*/
+static void jsonAppendSeparator(JsonString *p){
+ char c;
+ if( p->nUsed==0 ) return;
+ c = p->zBuf[p->nUsed-1];
+ if( c!='[' && c!='{' ) jsonAppendChar(p, ',');
+}
+
+/* Append the N-byte string in zIn to the end of the JsonString string
+** under construction. Enclose the string in "..." and escape
+** any double-quotes or backslash characters contained within the
+** string.
+*/
+static void jsonAppendString(JsonString *p, const char *zIn, u32 N){
+ u32 i;
+ if( (N+p->nUsed+2 >= p->nAlloc) && jsonGrow(p,N+2)!=0 ) return;
+ p->zBuf[p->nUsed++] = '"';
+ for(i=0; i<N; i++){
+ unsigned char c = ((unsigned const char*)zIn)[i];
+ if( c=='"' || c=='\\' ){
+ json_simple_escape:
+ if( (p->nUsed+N+3-i > p->nAlloc) && jsonGrow(p,N+3-i)!=0 ) return;
+ p->zBuf[p->nUsed++] = '\\';
+ }else if( c<=0x1f ){
+ static const char aSpecial[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 'b', 't', 'n', 0, 'f', 'r', 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ };
+ assert( sizeof(aSpecial)==32 );
+ assert( aSpecial['\b']=='b' );
+ assert( aSpecial['\f']=='f' );
+ assert( aSpecial['\n']=='n' );
+ assert( aSpecial['\r']=='r' );
+ assert( aSpecial['\t']=='t' );
+ if( aSpecial[c] ){
+ c = aSpecial[c];
+ goto json_simple_escape;
+ }
+ if( (p->nUsed+N+7+i > p->nAlloc) && jsonGrow(p,N+7-i)!=0 ) return;
+ p->zBuf[p->nUsed++] = '\\';
+ p->zBuf[p->nUsed++] = 'u';
+ p->zBuf[p->nUsed++] = '0';
+ p->zBuf[p->nUsed++] = '0';
+ p->zBuf[p->nUsed++] = '0' + (c>>4);
+ c = "0123456789abcdef"[c&0xf];
+ }
+ p->zBuf[p->nUsed++] = c;
+ }
+ p->zBuf[p->nUsed++] = '"';
+ assert( p->nUsed<p->nAlloc );
+}
+
+/*
+** Append a function parameter value to the JSON string under
+** construction.
+*/
+static void jsonAppendValue(
+ JsonString *p, /* Append to this JSON string */
+ sqlite3_value *pValue /* Value to append */
+){
+ switch( sqlite3_value_type(pValue) ){
+ case SQLITE_NULL: {
+ jsonAppendRaw(p, "null", 4);
+ break;
+ }
+ case SQLITE_INTEGER:
+ case SQLITE_FLOAT: {
+ const char *z = (const char*)sqlite3_value_text(pValue);
+ u32 n = (u32)sqlite3_value_bytes(pValue);
+ jsonAppendRaw(p, z, n);
+ break;
+ }
+ case SQLITE_TEXT: {
+ const char *z = (const char*)sqlite3_value_text(pValue);
+ u32 n = (u32)sqlite3_value_bytes(pValue);
+ if( sqlite3_value_subtype(pValue)==JSON_SUBTYPE ){
+ jsonAppendRaw(p, z, n);
+ }else{
+ jsonAppendString(p, z, n);
+ }
+ break;
+ }
+ default: {
+ if( p->bErr==0 ){
+ sqlite3_result_error(p->pCtx, "JSON cannot hold BLOB values", -1);
+ p->bErr = 2;
+ jsonReset(p);
+ }
+ break;
+ }
+ }
+}
+
+
+/* Make the JSON in p the result of the SQL function.
+*/
+static void jsonResult(JsonString *p){
+ if( p->bErr==0 ){
+ sqlite3_result_text64(p->pCtx, p->zBuf, p->nUsed,
+ p->bStatic ? SQLITE_TRANSIENT : sqlite3_free,
+ SQLITE_UTF8);
+ jsonZero(p);
+ }
+ assert( p->bStatic );
+}
+
+/**************************************************************************
+** Utility routines for dealing with JsonNode and JsonParse objects
+**************************************************************************/
+
+/*
+** Return the number of consecutive JsonNode slots need to represent
+** the parsed JSON at pNode. The minimum answer is 1. For ARRAY and
+** OBJECT types, the number might be larger.
+**
+** Appended elements are not counted. The value returned is the number
+** by which the JsonNode counter should increment in order to go to the
+** next peer value.
+*/
+static u32 jsonNodeSize(JsonNode *pNode){
+ return pNode->eType>=JSON_ARRAY ? pNode->n+1 : 1;
+}
+
+/*
+** Reclaim all memory allocated by a JsonParse object. But do not
+** delete the JsonParse object itself.
+*/
+static void jsonParseReset(JsonParse *pParse){
+ sqlite3_free(pParse->aNode);
+ pParse->aNode = 0;
+ pParse->nNode = 0;
+ pParse->nAlloc = 0;
+ sqlite3_free(pParse->aUp);
+ pParse->aUp = 0;
+}
+
+/*
+** Free a JsonParse object that was obtained from sqlite3_malloc().
+*/
+static void jsonParseFree(JsonParse *pParse){
+ jsonParseReset(pParse);
+ sqlite3_free(pParse);
+}
+
+/*
+** Convert the JsonNode pNode into a pure JSON string and
+** append to pOut. Subsubstructure is also included. Return
+** the number of JsonNode objects that are encoded.
+*/
+static void jsonRenderNode(
+ JsonNode *pNode, /* The node to render */
+ JsonString *pOut, /* Write JSON here */
+ sqlite3_value **aReplace /* Replacement values */
+){
+ if( pNode->jnFlags & (JNODE_REPLACE|JNODE_PATCH) ){
+ if( pNode->jnFlags & JNODE_REPLACE ){
+ jsonAppendValue(pOut, aReplace[pNode->u.iReplace]);
+ return;
+ }
+ pNode = pNode->u.pPatch;
+ }
+ switch( pNode->eType ){
+ default: {
+ assert( pNode->eType==JSON_NULL );
+ jsonAppendRaw(pOut, "null", 4);
+ break;
+ }
+ case JSON_TRUE: {
+ jsonAppendRaw(pOut, "true", 4);
+ break;
+ }
+ case JSON_FALSE: {
+ jsonAppendRaw(pOut, "false", 5);
+ break;
+ }
+ case JSON_STRING: {
+ if( pNode->jnFlags & JNODE_RAW ){
+ jsonAppendString(pOut, pNode->u.zJContent, pNode->n);
+ break;
+ }
+ /* Fall through into the next case */
+ }
+ case JSON_REAL:
+ case JSON_INT: {
+ jsonAppendRaw(pOut, pNode->u.zJContent, pNode->n);
+ break;
+ }
+ case JSON_ARRAY: {
+ u32 j = 1;
+ jsonAppendChar(pOut, '[');
+ for(;;){
+ while( j<=pNode->n ){
+ if( (pNode[j].jnFlags & JNODE_REMOVE)==0 ){
+ jsonAppendSeparator(pOut);
+ jsonRenderNode(&pNode[j], pOut, aReplace);
+ }
+ j += jsonNodeSize(&pNode[j]);
+ }
+ if( (pNode->jnFlags & JNODE_APPEND)==0 ) break;
+ pNode = &pNode[pNode->u.iAppend];
+ j = 1;
+ }
+ jsonAppendChar(pOut, ']');
+ break;
+ }
+ case JSON_OBJECT: {
+ u32 j = 1;
+ jsonAppendChar(pOut, '{');
+ for(;;){
+ while( j<=pNode->n ){
+ if( (pNode[j+1].jnFlags & JNODE_REMOVE)==0 ){
+ jsonAppendSeparator(pOut);
+ jsonRenderNode(&pNode[j], pOut, aReplace);
+ jsonAppendChar(pOut, ':');
+ jsonRenderNode(&pNode[j+1], pOut, aReplace);
+ }
+ j += 1 + jsonNodeSize(&pNode[j+1]);
+ }
+ if( (pNode->jnFlags & JNODE_APPEND)==0 ) break;
+ pNode = &pNode[pNode->u.iAppend];
+ j = 1;
+ }
+ jsonAppendChar(pOut, '}');
+ break;
+ }
+ }
+}
+
+/*
+** Return a JsonNode and all its descendents as a JSON string.
+*/
+static void jsonReturnJson(
+ JsonNode *pNode, /* Node to return */
+ sqlite3_context *pCtx, /* Return value for this function */
+ sqlite3_value **aReplace /* Array of replacement values */
+){
+ JsonString s;
+ jsonInit(&s, pCtx);
+ jsonRenderNode(pNode, &s, aReplace);
+ jsonResult(&s);
+ sqlite3_result_subtype(pCtx, JSON_SUBTYPE);
+}
+
+/*
+** Make the JsonNode the return value of the function.
+*/
+static void jsonReturn(
+ JsonNode *pNode, /* Node to return */
+ sqlite3_context *pCtx, /* Return value for this function */
+ sqlite3_value **aReplace /* Array of replacement values */
+){
+ switch( pNode->eType ){
+ default: {
+ assert( pNode->eType==JSON_NULL );
+ sqlite3_result_null(pCtx);
+ break;
+ }
+ case JSON_TRUE: {
+ sqlite3_result_int(pCtx, 1);
+ break;
+ }
+ case JSON_FALSE: {
+ sqlite3_result_int(pCtx, 0);
+ break;
+ }
+ case JSON_INT: {
+ sqlite3_int64 i = 0;
+ const char *z = pNode->u.zJContent;
+ if( z[0]=='-' ){ z++; }
+ while( z[0]>='0' && z[0]<='9' ){
+ unsigned v = *(z++) - '0';
+ if( i>=LARGEST_INT64/10 ){
+ if( i>LARGEST_INT64/10 ) goto int_as_real;
+ if( z[0]>='0' && z[0]<='9' ) goto int_as_real;
+ if( v==9 ) goto int_as_real;
+ if( v==8 ){
+ if( pNode->u.zJContent[0]=='-' ){
+ sqlite3_result_int64(pCtx, SMALLEST_INT64);
+ goto int_done;
+ }else{
+ goto int_as_real;
+ }
+ }
+ }
+ i = i*10 + v;
+ }
+ if( pNode->u.zJContent[0]=='-' ){ i = -i; }
+ sqlite3_result_int64(pCtx, i);
+ int_done:
+ break;
+ int_as_real: /* fall through to real */;
+ }
+ case JSON_REAL: {
+ double r;
+#ifdef SQLITE_AMALGAMATION
+ const char *z = pNode->u.zJContent;
+ sqlite3AtoF(z, &r, sqlite3Strlen30(z), SQLITE_UTF8);
+#else
+ r = strtod(pNode->u.zJContent, 0);
+#endif
+ sqlite3_result_double(pCtx, r);
+ break;
+ }
+ case JSON_STRING: {
+#if 0 /* Never happens because JNODE_RAW is only set by json_set(),
+ ** json_insert() and json_replace() and those routines do not
+ ** call jsonReturn() */
+ if( pNode->jnFlags & JNODE_RAW ){
+ sqlite3_result_text(pCtx, pNode->u.zJContent, pNode->n,
+ SQLITE_TRANSIENT);
+ }else
+#endif
+ assert( (pNode->jnFlags & JNODE_RAW)==0 );
+ if( (pNode->jnFlags & JNODE_ESCAPE)==0 ){
+ /* JSON formatted without any backslash-escapes */
+ sqlite3_result_text(pCtx, pNode->u.zJContent+1, pNode->n-2,
+ SQLITE_TRANSIENT);
+ }else{
+ /* Translate JSON formatted string into raw text */
+ u32 i;
+ u32 n = pNode->n;
+ const char *z = pNode->u.zJContent;
+ char *zOut;
+ u32 j;
+ zOut = sqlite3_malloc( n+1 );
+ if( zOut==0 ){
+ sqlite3_result_error_nomem(pCtx);
+ break;
+ }
+ for(i=1, j=0; i<n-1; i++){
+ char c = z[i];
+ if( c!='\\' ){
+ zOut[j++] = c;
+ }else{
+ c = z[++i];
+ if( c=='u' ){
+ u32 v = 0, k;
+ for(k=0; k<4; i++, k++){
+ assert( i<n-2 );
+ c = z[i+1];
+ assert( safe_isxdigit(c) );
+ if( c<='9' ) v = v*16 + c - '0';
+ else if( c<='F' ) v = v*16 + c - 'A' + 10;
+ else v = v*16 + c - 'a' + 10;
+ }
+ if( v==0 ) break;
+ if( v<=0x7f ){
+ zOut[j++] = (char)v;
+ }else if( v<=0x7ff ){
+ zOut[j++] = (char)(0xc0 | (v>>6));
+ zOut[j++] = 0x80 | (v&0x3f);
+ }else{
+ zOut[j++] = (char)(0xe0 | (v>>12));
+ zOut[j++] = 0x80 | ((v>>6)&0x3f);
+ zOut[j++] = 0x80 | (v&0x3f);
+ }
+ }else{
+ if( c=='b' ){
+ c = '\b';
+ }else if( c=='f' ){
+ c = '\f';
+ }else if( c=='n' ){
+ c = '\n';
+ }else if( c=='r' ){
+ c = '\r';
+ }else if( c=='t' ){
+ c = '\t';
+ }
+ zOut[j++] = c;
+ }
+ }
+ }
+ zOut[j] = 0;
+ sqlite3_result_text(pCtx, zOut, j, sqlite3_free);
+ }
+ break;
+ }
+ case JSON_ARRAY:
+ case JSON_OBJECT: {
+ jsonReturnJson(pNode, pCtx, aReplace);
+ break;
+ }
+ }
+}
+
+/* Forward reference */
+static int jsonParseAddNode(JsonParse*,u32,u32,const char*);
+
+/*
+** A macro to hint to the compiler that a function should not be
+** inlined.
+*/
+#if defined(__GNUC__)
+# define JSON_NOINLINE __attribute__((noinline))
+#elif defined(_MSC_VER) && _MSC_VER>=1310
+# define JSON_NOINLINE __declspec(noinline)
+#else
+# define JSON_NOINLINE
+#endif
+
+
+static JSON_NOINLINE int jsonParseAddNodeExpand(
+ JsonParse *pParse, /* Append the node to this object */
+ u32 eType, /* Node type */
+ u32 n, /* Content size or sub-node count */
+ const char *zContent /* Content */
+){
+ u32 nNew;
+ JsonNode *pNew;
+ assert( pParse->nNode>=pParse->nAlloc );
+ if( pParse->oom ) return -1;
+ nNew = pParse->nAlloc*2 + 10;
+ pNew = sqlite3_realloc(pParse->aNode, sizeof(JsonNode)*nNew);
+ if( pNew==0 ){
+ pParse->oom = 1;
+ return -1;
+ }
+ pParse->nAlloc = nNew;
+ pParse->aNode = pNew;
+ assert( pParse->nNode<pParse->nAlloc );
+ return jsonParseAddNode(pParse, eType, n, zContent);
+}
+
+/*
+** Create a new JsonNode instance based on the arguments and append that
+** instance to the JsonParse. Return the index in pParse->aNode[] of the
+** new node, or -1 if a memory allocation fails.
+*/
+static int jsonParseAddNode(
+ JsonParse *pParse, /* Append the node to this object */
+ u32 eType, /* Node type */
+ u32 n, /* Content size or sub-node count */
+ const char *zContent /* Content */
+){
+ JsonNode *p;
+ if( pParse->nNode>=pParse->nAlloc ){
+ return jsonParseAddNodeExpand(pParse, eType, n, zContent);
+ }
+ p = &pParse->aNode[pParse->nNode];
+ p->eType = (u8)eType;
+ p->jnFlags = 0;
+ p->n = n;
+ p->u.zJContent = zContent;
+ return pParse->nNode++;
+}
+
+/*
+** Return true if z[] begins with 4 (or more) hexadecimal digits
+*/
+static int jsonIs4Hex(const char *z){
+ int i;
+ for(i=0; i<4; i++) if( !safe_isxdigit(z[i]) ) return 0;
+ return 1;
+}
+
+/*
+** Parse a single JSON value which begins at pParse->zJson[i]. Return the
+** index of the first character past the end of the value parsed.
+**
+** Return negative for a syntax error. Special cases: return -2 if the
+** first non-whitespace character is '}' and return -3 if the first
+** non-whitespace character is ']'.
+*/
+static int jsonParseValue(JsonParse *pParse, u32 i){
+ char c;
+ u32 j;
+ int iThis;
+ int x;
+ JsonNode *pNode;
+ const char *z = pParse->zJson;
+ while( safe_isspace(z[i]) ){ i++; }
+ if( (c = z[i])=='{' ){
+ /* Parse object */
+ iThis = jsonParseAddNode(pParse, JSON_OBJECT, 0, 0);
+ if( iThis<0 ) return -1;
+ for(j=i+1;;j++){
+ while( safe_isspace(z[j]) ){ j++; }
+ if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1;
+ x = jsonParseValue(pParse, j);
+ if( x<0 ){
+ pParse->iDepth--;
+ if( x==(-2) && pParse->nNode==(u32)iThis+1 ) return j+1;
+ return -1;
+ }
+ if( pParse->oom ) return -1;
+ pNode = &pParse->aNode[pParse->nNode-1];
+ if( pNode->eType!=JSON_STRING ) return -1;
+ pNode->jnFlags |= JNODE_LABEL;
+ j = x;
+ while( safe_isspace(z[j]) ){ j++; }
+ if( z[j]!=':' ) return -1;
+ j++;
+ x = jsonParseValue(pParse, j);
+ pParse->iDepth--;
+ if( x<0 ) return -1;
+ j = x;
+ while( safe_isspace(z[j]) ){ j++; }
+ c = z[j];
+ if( c==',' ) continue;
+ if( c!='}' ) return -1;
+ break;
+ }
+ pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1;
+ return j+1;
+ }else if( c=='[' ){
+ /* Parse array */
+ iThis = jsonParseAddNode(pParse, JSON_ARRAY, 0, 0);
+ if( iThis<0 ) return -1;
+ for(j=i+1;;j++){
+ while( safe_isspace(z[j]) ){ j++; }
+ if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1;
+ x = jsonParseValue(pParse, j);
+ pParse->iDepth--;
+ if( x<0 ){
+ if( x==(-3) && pParse->nNode==(u32)iThis+1 ) return j+1;
+ return -1;
+ }
+ j = x;
+ while( safe_isspace(z[j]) ){ j++; }
+ c = z[j];
+ if( c==',' ) continue;
+ if( c!=']' ) return -1;
+ break;
+ }
+ pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1;
+ return j+1;
+ }else if( c=='"' ){
+ /* Parse string */
+ u8 jnFlags = 0;
+ j = i+1;
+ for(;;){
+ c = z[j];
+ if( (c & ~0x1f)==0 ){
+ /* Control characters are not allowed in strings */
+ return -1;
+ }
+ if( c=='\\' ){
+ c = z[++j];
+ if( c=='"' || c=='\\' || c=='/' || c=='b' || c=='f'
+ || c=='n' || c=='r' || c=='t'
+ || (c=='u' && jsonIs4Hex(z+j+1)) ){
+ jnFlags = JNODE_ESCAPE;
+ }else{
+ return -1;
+ }
+ }else if( c=='"' ){
+ break;
+ }
+ j++;
+ }
+ jsonParseAddNode(pParse, JSON_STRING, j+1-i, &z[i]);
+ if( !pParse->oom ) pParse->aNode[pParse->nNode-1].jnFlags = jnFlags;
+ return j+1;
+ }else if( c=='n'
+ && strncmp(z+i,"null",4)==0
+ && !safe_isalnum(z[i+4]) ){
+ jsonParseAddNode(pParse, JSON_NULL, 0, 0);
+ return i+4;
+ }else if( c=='t'
+ && strncmp(z+i,"true",4)==0
+ && !safe_isalnum(z[i+4]) ){
+ jsonParseAddNode(pParse, JSON_TRUE, 0, 0);
+ return i+4;
+ }else if( c=='f'
+ && strncmp(z+i,"false",5)==0
+ && !safe_isalnum(z[i+5]) ){
+ jsonParseAddNode(pParse, JSON_FALSE, 0, 0);
+ return i+5;
+ }else if( c=='-' || (c>='0' && c<='9') ){
+ /* Parse number */
+ u8 seenDP = 0;
+ u8 seenE = 0;
+ assert( '-' < '0' );
+ if( c<='0' ){
+ j = c=='-' ? i+1 : i;
+ if( z[j]=='0' && z[j+1]>='0' && z[j+1]<='9' ) return -1;
+ }
+ j = i+1;
+ for(;; j++){
+ c = z[j];
+ if( c>='0' && c<='9' ) continue;
+ if( c=='.' ){
+ if( z[j-1]=='-' ) return -1;
+ if( seenDP ) return -1;
+ seenDP = 1;
+ continue;
+ }
+ if( c=='e' || c=='E' ){
+ if( z[j-1]<'0' ) return -1;
+ if( seenE ) return -1;
+ seenDP = seenE = 1;
+ c = z[j+1];
+ if( c=='+' || c=='-' ){
+ j++;
+ c = z[j+1];
+ }
+ if( c<'0' || c>'9' ) return -1;
+ continue;
+ }
+ break;
+ }
+ if( z[j-1]<'0' ) return -1;
+ jsonParseAddNode(pParse, seenDP ? JSON_REAL : JSON_INT,
+ j - i, &z[i]);
+ return j;
+ }else if( c=='}' ){
+ return -2; /* End of {...} */
+ }else if( c==']' ){
+ return -3; /* End of [...] */
+ }else if( c==0 ){
+ return 0; /* End of file */
+ }else{
+ return -1; /* Syntax error */
+ }
+}
+
+/*
+** Parse a complete JSON string. Return 0 on success or non-zero if there
+** are any errors. If an error occurs, free all memory associated with
+** pParse.
+**
+** pParse is uninitialized when this routine is called.
+*/
+static int jsonParse(
+ JsonParse *pParse, /* Initialize and fill this JsonParse object */
+ sqlite3_context *pCtx, /* Report errors here */
+ const char *zJson /* Input JSON text to be parsed */
+){
+ int i;
+ memset(pParse, 0, sizeof(*pParse));
+ if( zJson==0 ) return 1;
+ pParse->zJson = zJson;
+ i = jsonParseValue(pParse, 0);
+ if( pParse->oom ) i = -1;
+ if( i>0 ){
+ assert( pParse->iDepth==0 );
+ while( safe_isspace(zJson[i]) ) i++;
+ if( zJson[i] ) i = -1;
+ }
+ if( i<=0 ){
+ if( pCtx!=0 ){
+ if( pParse->oom ){
+ sqlite3_result_error_nomem(pCtx);
+ }else{
+ sqlite3_result_error(pCtx, "malformed JSON", -1);
+ }
+ }
+ jsonParseReset(pParse);
+ return 1;
+ }
+ return 0;
+}
+
+/* Mark node i of pParse as being a child of iParent. Call recursively
+** to fill in all the descendants of node i.
+*/
+static void jsonParseFillInParentage(JsonParse *pParse, u32 i, u32 iParent){
+ JsonNode *pNode = &pParse->aNode[i];
+ u32 j;
+ pParse->aUp[i] = iParent;
+ switch( pNode->eType ){
+ case JSON_ARRAY: {
+ for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j)){
+ jsonParseFillInParentage(pParse, i+j, i);
+ }
+ break;
+ }
+ case JSON_OBJECT: {
+ for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j+1)+1){
+ pParse->aUp[i+j] = i;
+ jsonParseFillInParentage(pParse, i+j+1, i);
+ }
+ break;
+ }
+ default: {
+ break;
+ }
+ }
+}
+
+/*
+** Compute the parentage of all nodes in a completed parse.
+*/
+static int jsonParseFindParents(JsonParse *pParse){
+ u32 *aUp;
+ assert( pParse->aUp==0 );
+ aUp = pParse->aUp = sqlite3_malloc( sizeof(u32)*pParse->nNode );
+ if( aUp==0 ){
+ pParse->oom = 1;
+ return SQLITE_NOMEM;
+ }
+ jsonParseFillInParentage(pParse, 0, 0);
+ return SQLITE_OK;
+}
+
+/*
+** Magic number used for the JSON parse cache in sqlite3_get_auxdata()
+*/
+#define JSON_CACHE_ID (-429938)
+
+/*
+** Obtain a complete parse of the JSON found in the first argument
+** of the argv array. Use the sqlite3_get_auxdata() cache for this
+** parse if it is available. If the cache is not available or if it
+** is no longer valid, parse the JSON again and return the new parse,
+** and also register the new parse so that it will be available for
+** future sqlite3_get_auxdata() calls.
+*/
+static JsonParse *jsonParseCached(
+ sqlite3_context *pCtx,
+ sqlite3_value **argv
+){
+ const char *zJson = (const char*)sqlite3_value_text(argv[0]);
+ int nJson = sqlite3_value_bytes(argv[0]);
+ JsonParse *p;
+ if( zJson==0 ) return 0;
+ p = (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID);
+ if( p && p->nJson==nJson && memcmp(p->zJson,zJson,nJson)==0 ){
+ p->nErr = 0;
+ return p; /* The cached entry matches, so return it */
+ }
+ p = sqlite3_malloc( sizeof(*p) + nJson + 1 );
+ if( p==0 ){
+ sqlite3_result_error_nomem(pCtx);
+ return 0;
+ }
+ memset(p, 0, sizeof(*p));
+ p->zJson = (char*)&p[1];
+ memcpy((char*)p->zJson, zJson, nJson+1);
+ if( jsonParse(p, pCtx, p->zJson) ){
+ sqlite3_free(p);
+ return 0;
+ }
+ p->nJson = nJson;
+ sqlite3_set_auxdata(pCtx, JSON_CACHE_ID, p, (void(*)(void*))jsonParseFree);
+ return (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID);
+}
+
+/*
+** Compare the OBJECT label at pNode against zKey,nKey. Return true on
+** a match.
+*/
+static int jsonLabelCompare(JsonNode *pNode, const char *zKey, u32 nKey){
+ if( pNode->jnFlags & JNODE_RAW ){
+ if( pNode->n!=nKey ) return 0;
return strncmp(pNode->u.zJContent, zKey, nKey)==0;
}else{
if( pNode->n!=nKey+2 ) return 0;
sqlite3_free(zMsg);
}
+/*
+** Mark all NULL entries in the Object passed in as JNODE_REMOVE.
+*/
+static void jsonRemoveAllNulls(JsonNode *pNode){
+ int i, n;
+ assert( pNode->eType==JSON_OBJECT );
+ n = pNode->n;
+ for(i=2; i<=n; i += jsonNodeSize(&pNode[i])+1){
+ switch( pNode[i].eType ){
+ case JSON_NULL:
+ pNode[i].jnFlags |= JNODE_REMOVE;
+ break;
+ case JSON_OBJECT:
+ jsonRemoveAllNulls(&pNode[i]);
+ break;
+ }
+ }
+}
+
/****************************************************************************
** SQL functions used for testing and debugging
#endif /* SQLITE_DEBUG */
/****************************************************************************
-** SQL function implementations
+** Scalar SQL function implementations
****************************************************************************/
+/*
+** Implementation of the json_QUOTE(VALUE) function. Return a JSON value
+** corresponding to the SQL value input. Mostly this means putting
+** double-quotes around strings and returning the unquoted string "null"
+** when given a NULL input.
+*/
+static void jsonQuoteFunc(
+ sqlite3_context *ctx,
+ int argc,
+ sqlite3_value **argv
+){
+ JsonString jx;
+ UNUSED_PARAM(argc);
+
+ jsonInit(&jx, ctx);
+ jsonAppendValue(&jx, argv[0]);
+ jsonResult(&jx);
+ sqlite3_result_subtype(ctx, JSON_SUBTYPE);
+}
+
/*
** Implementation of the json_array(VALUE,...) function. Return a JSON
** array that contains all values given in arguments. Or if any argument
int argc,
sqlite3_value **argv
){
- JsonParse x; /* The parse */
+ JsonParse *p; /* The parse */
sqlite3_int64 n = 0;
u32 i;
JsonNode *pNode;
- if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return;
- assert( x.nNode );
+ p = jsonParseCached(ctx, argv);
+ if( p==0 ) return;
+ assert( p->nNode );
if( argc==2 ){
const char *zPath = (const char*)sqlite3_value_text(argv[1]);
- pNode = jsonLookup(&x, zPath, 0, ctx);
+ pNode = jsonLookup(p, zPath, 0, ctx);
}else{
- pNode = x.aNode;
+ pNode = p->aNode;
}
if( pNode==0 ){
- x.nErr = 1;
- }else if( pNode->eType==JSON_ARRAY ){
+ return;
+ }
+ if( pNode->eType==JSON_ARRAY ){
assert( (pNode->jnFlags & JNODE_APPEND)==0 );
for(i=1; i<=pNode->n; n++){
i += jsonNodeSize(&pNode[i]);
}
}
- if( x.nErr==0 ) sqlite3_result_int64(ctx, n);
- jsonParseReset(&x);
+ sqlite3_result_int64(ctx, n);
}
/*
int argc,
sqlite3_value **argv
){
- JsonParse x; /* The parse */
+ JsonParse *p; /* The parse */
JsonNode *pNode;
const char *zPath;
JsonString jx;
int i;
if( argc<2 ) return;
- if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return;
+ p = jsonParseCached(ctx, argv);
+ if( p==0 ) return;
jsonInit(&jx, ctx);
jsonAppendChar(&jx, '[');
for(i=1; i<argc; i++){
zPath = (const char*)sqlite3_value_text(argv[i]);
- pNode = jsonLookup(&x, zPath, 0, ctx);
- if( x.nErr ) break;
+ pNode = jsonLookup(p, zPath, 0, ctx);
+ if( p->nErr ) break;
if( argc>2 ){
jsonAppendSeparator(&jx);
if( pNode ){
sqlite3_result_subtype(ctx, JSON_SUBTYPE);
}
jsonReset(&jx);
+}
+
+/* This is the RFC 7396 MergePatch algorithm.
+*/
+static JsonNode *jsonMergePatch(
+ JsonParse *pParse, /* The JSON parser that contains the TARGET */
+ u32 iTarget, /* Node of the TARGET in pParse */
+ JsonNode *pPatch /* The PATCH */
+){
+ u32 i, j;
+ u32 iRoot;
+ JsonNode *pTarget;
+ if( pPatch->eType!=JSON_OBJECT ){
+ return pPatch;
+ }
+ assert( iTarget>=0 && iTarget<pParse->nNode );
+ pTarget = &pParse->aNode[iTarget];
+ assert( (pPatch->jnFlags & JNODE_APPEND)==0 );
+ if( pTarget->eType!=JSON_OBJECT ){
+ jsonRemoveAllNulls(pPatch);
+ return pPatch;
+ }
+ iRoot = iTarget;
+ for(i=1; i<pPatch->n; i += jsonNodeSize(&pPatch[i+1])+1){
+ u32 nKey;
+ const char *zKey;
+ assert( pPatch[i].eType==JSON_STRING );
+ assert( pPatch[i].jnFlags & JNODE_LABEL );
+ nKey = pPatch[i].n;
+ zKey = pPatch[i].u.zJContent;
+ assert( (pPatch[i].jnFlags & JNODE_RAW)==0 );
+ for(j=1; j<pTarget->n; j += jsonNodeSize(&pTarget[j+1])+1 ){
+ assert( pTarget[j].eType==JSON_STRING );
+ assert( pTarget[j].jnFlags & JNODE_LABEL );
+ assert( (pPatch[i].jnFlags & JNODE_RAW)==0 );
+ if( pTarget[j].n==nKey && strncmp(pTarget[j].u.zJContent,zKey,nKey)==0 ){
+ if( pTarget[j+1].jnFlags & (JNODE_REMOVE|JNODE_PATCH) ) break;
+ if( pPatch[i+1].eType==JSON_NULL ){
+ pTarget[j+1].jnFlags |= JNODE_REMOVE;
+ }else{
+ JsonNode *pNew = jsonMergePatch(pParse, iTarget+j+1, &pPatch[i+1]);
+ if( pNew==0 ) return 0;
+ pTarget = &pParse->aNode[iTarget];
+ if( pNew!=&pTarget[j+1] ){
+ pTarget[j+1].u.pPatch = pNew;
+ pTarget[j+1].jnFlags |= JNODE_PATCH;
+ }
+ }
+ break;
+ }
+ }
+ if( j>=pTarget->n && pPatch[i+1].eType!=JSON_NULL ){
+ int iStart, iPatch;
+ iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0);
+ jsonParseAddNode(pParse, JSON_STRING, nKey, zKey);
+ iPatch = jsonParseAddNode(pParse, JSON_TRUE, 0, 0);
+ if( pParse->oom ) return 0;
+ jsonRemoveAllNulls(pPatch);
+ pTarget = &pParse->aNode[iTarget];
+ pParse->aNode[iRoot].jnFlags |= JNODE_APPEND;
+ pParse->aNode[iRoot].u.iAppend = iStart - iRoot;
+ iRoot = iStart;
+ pParse->aNode[iPatch].jnFlags |= JNODE_PATCH;
+ pParse->aNode[iPatch].u.pPatch = &pPatch[i+1];
+ }
+ }
+ return pTarget;
+}
+
+/*
+** Implementation of the json_mergepatch(JSON1,JSON2) function. Return a JSON
+** object that is the result of running the RFC 7396 MergePatch() algorithm
+** on the two arguments.
+*/
+static void jsonPatchFunc(
+ sqlite3_context *ctx,
+ int argc,
+ sqlite3_value **argv
+){
+ JsonParse x; /* The JSON that is being patched */
+ JsonParse y; /* The patch */
+ JsonNode *pResult; /* The result of the merge */
+
+ UNUSED_PARAM(argc);
+ if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return;
+ if( jsonParse(&y, ctx, (const char*)sqlite3_value_text(argv[1])) ){
+ jsonParseReset(&x);
+ return;
+ }
+ pResult = jsonMergePatch(&x, 0, y.aNode);
+ assert( pResult!=0 || x.oom );
+ if( pResult ){
+ jsonReturnJson(pResult, ctx, 0);
+ }else{
+ sqlite3_result_error_nomem(ctx);
+ }
jsonParseReset(&x);
+ jsonParseReset(&y);
}
+
/*
** Implementation of the json_object(NAME,VALUE,...) function. Return a JSON
** object that contains all name/value given in arguments. Or if any name
if( x.nErr ) goto replace_err;
if( pNode ){
pNode->jnFlags |= (u8)JNODE_REPLACE;
- pNode->iVal = (u8)(i+1);
+ pNode->u.iReplace = i + 1;
}
}
if( x.aNode[0].jnFlags & JNODE_REPLACE ){
- sqlite3_result_value(ctx, argv[x.aNode[0].iVal]);
+ sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]);
}else{
jsonReturnJson(x.aNode, ctx, argv);
}
goto jsonSetDone;
}else if( pNode && (bApnd || bIsSet) ){
pNode->jnFlags |= (u8)JNODE_REPLACE;
- pNode->iVal = (u8)(i+1);
+ pNode->u.iReplace = i + 1;
}
}
if( x.aNode[0].jnFlags & JNODE_REPLACE ){
- sqlite3_result_value(ctx, argv[x.aNode[0].iVal]);
+ sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]);
}else{
jsonReturnJson(x.aNode, ctx, argv);
}
sqlite3_result_int(ctx, rc);
}
+
+/****************************************************************************
+** Aggregate SQL function implementations
+****************************************************************************/
+/*
+** json_group_array(VALUE)
+**
+** Return a JSON array composed of all values in the aggregate.
+*/
+static void jsonArrayStep(
+ sqlite3_context *ctx,
+ int argc,
+ sqlite3_value **argv
+){
+ JsonString *pStr;
+ UNUSED_PARAM(argc);
+ pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr));
+ if( pStr ){
+ if( pStr->zBuf==0 ){
+ jsonInit(pStr, ctx);
+ jsonAppendChar(pStr, '[');
+ }else{
+ jsonAppendChar(pStr, ',');
+ pStr->pCtx = ctx;
+ }
+ jsonAppendValue(pStr, argv[0]);
+ }
+}
+static void jsonArrayFinal(sqlite3_context *ctx){
+ JsonString *pStr;
+ pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0);
+ if( pStr ){
+ pStr->pCtx = ctx;
+ jsonAppendChar(pStr, ']');
+ if( pStr->bErr ){
+ if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx);
+ assert( pStr->bStatic );
+ }else{
+ sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed,
+ pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free);
+ pStr->bStatic = 1;
+ }
+ }else{
+ sqlite3_result_text(ctx, "[]", 2, SQLITE_STATIC);
+ }
+ sqlite3_result_subtype(ctx, JSON_SUBTYPE);
+}
+
+/*
+** json_group_obj(NAME,VALUE)
+**
+** Return a JSON object composed of all names and values in the aggregate.
+*/
+static void jsonObjectStep(
+ sqlite3_context *ctx,
+ int argc,
+ sqlite3_value **argv
+){
+ JsonString *pStr;
+ const char *z;
+ u32 n;
+ UNUSED_PARAM(argc);
+ pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr));
+ if( pStr ){
+ if( pStr->zBuf==0 ){
+ jsonInit(pStr, ctx);
+ jsonAppendChar(pStr, '{');
+ }else{
+ jsonAppendChar(pStr, ',');
+ pStr->pCtx = ctx;
+ }
+ z = (const char*)sqlite3_value_text(argv[0]);
+ n = (u32)sqlite3_value_bytes(argv[0]);
+ jsonAppendString(pStr, z, n);
+ jsonAppendChar(pStr, ':');
+ jsonAppendValue(pStr, argv[1]);
+ }
+}
+static void jsonObjectFinal(sqlite3_context *ctx){
+ JsonString *pStr;
+ pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0);
+ if( pStr ){
+ jsonAppendChar(pStr, '}');
+ if( pStr->bErr ){
+ if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx);
+ assert( pStr->bStatic );
+ }else{
+ sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed,
+ pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free);
+ pStr->bStatic = 1;
+ }
+ }else{
+ sqlite3_result_text(ctx, "{}", 2, SQLITE_STATIC);
+ }
+ sqlite3_result_subtype(ctx, JSON_SUBTYPE);
+}
+
+
#ifndef SQLITE_OMIT_VIRTUALTABLE
/****************************************************************************
** The json_each virtual table
/* For json_each() path and root are the same so fall through
** into the root case */
}
- case JEACH_ROOT: {
+ default: {
const char *zRoot = p->zRoot;
- if( zRoot==0 ) zRoot = "$";
+ if( zRoot==0 ) zRoot = "$";
sqlite3_result_text(ctx, zRoot, -1, SQLITE_STATIC);
break;
}
{ "json_extract", -1, 0, jsonExtractFunc },
{ "json_insert", -1, 0, jsonSetFunc },
{ "json_object", -1, 0, jsonObjectFunc },
+ { "json_patch", 2, 0, jsonPatchFunc },
+ { "json_quote", 1, 0, jsonQuoteFunc },
{ "json_remove", -1, 0, jsonRemoveFunc },
{ "json_replace", -1, 0, jsonReplaceFunc },
{ "json_set", -1, 1, jsonSetFunc },
{ "json_test1", 1, 0, jsonTest1Func },
#endif
};
+ static const struct {
+ const char *zName;
+ int nArg;
+ void (*xStep)(sqlite3_context*,int,sqlite3_value**);
+ void (*xFinal)(sqlite3_context*);
+ } aAgg[] = {
+ { "json_group_array", 1, jsonArrayStep, jsonArrayFinal },
+ { "json_group_object", 2, jsonObjectStep, jsonObjectFinal },
+ };
#ifndef SQLITE_OMIT_VIRTUALTABLE
static const struct {
const char *zName;
(void*)&aFunc[i].flag,
aFunc[i].xFunc, 0, 0);
}
+ for(i=0; i<sizeof(aAgg)/sizeof(aAgg[0]) && rc==SQLITE_OK; i++){
+ rc = sqlite3_create_function(db, aAgg[i].zName, aAgg[i].nArg,
+ SQLITE_UTF8 | SQLITE_DETERMINISTIC, 0,
+ 0, aAgg[i].xStep, aAgg[i].xFinal);
+ }
#ifndef SQLITE_OMIT_VIRTUALTABLE
for(i=0; i<sizeof(aMod)/sizeof(aMod[0]) && rc==SQLITE_OK; i++){
rc = sqlite3_create_module(db, aMod[i].zName, aMod[i].pModule, 0);
}
+#ifndef SQLITE_CORE
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_json_init(
+SQLITE_API int sqlite3_json_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
(void)pzErrMsg; /* Unused parameter */
return sqlite3Json1Init(db);
}
+#endif
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_JSON1) */
/************** End of json1.c ***********************************************/
** an OOM condition or IO error), an appropriate SQLite error code is
** returned.
**
+** This function may be quite inefficient if used with an FTS5 table
+** created with the "columnsize=0" option.
+**
** xColumnText:
** This function attempts to retrieve the text of column iCol of the
** current document. If successful, (*pz) is set to point to a buffer
** the query within the current row. Return SQLITE_OK if successful, or
** an error code (i.e. SQLITE_NOMEM) if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always returns 0.
+**
** xInst:
** Query for the details of phrase match iIdx within the current row.
** Phrase matches are numbered starting from zero, so the iIdx argument
** should be greater than or equal to zero and smaller than the value
** output by xInstCount().
**
+** Usually, output parameter *piPhrase is set to the phrase number, *piCol
+** to the column in which it occurs and *piOff the token offset of the
+** first token of the phrase. The exception is if the table was created
+** with the offsets=0 option specified. In this case *piOff is always
+** set to -1.
+**
** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
** if an error occurs.
**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option.
+**
** xRowid:
** Returns the rowid of the current row.
**
** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
**
** with $p set to a phrase equivalent to the phrase iPhrase of the
-** current query is executed. For each row visited, the callback function
-** passed as the fourth argument is invoked. The context and API objects
-** passed to the callback function may be used to access the properties of
-** each matched row. Invoking Api.xUserData() returns a copy of the pointer
-** passed as the third argument to pUserData.
+** current query is executed. Any column filter that applies to
+** phrase iPhrase of the current query is included in $p. For each
+** row visited, the callback function passed as the fourth argument
+** is invoked. The context and API objects passed to the callback
+** function may be used to access the properties of each matched row.
+** Invoking Api.xUserData() returns a copy of the pointer passed as
+** the third argument to pUserData.
**
** If the callback function returns any value other than SQLITE_OK, the
** query is abandoned and the xQueryPhrase function returns immediately.
** Fts5PhraseIter iter;
** int iCol, iOff;
** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-** iOff>=0;
+** iCol>=0;
** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
** ){
** // An instance of phrase iPhrase at offset iOff of column iCol
**
** The Fts5PhraseIter structure is defined above. Applications should not
** modify this structure directly - it should only be used as shown above
-** with the xPhraseFirst() and xPhraseNext() API methods.
+** with the xPhraseFirst() and xPhraseNext() API methods (and by
+** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always iterates
+** through an empty set (all calls to xPhraseFirst() set iCol to -1).
**
** xPhraseNext()
** See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+** and xPhraseNext() APIs described above. The difference is that instead
+** of iterating through all instances of a phrase in the current row, these
+** APIs are used to iterate through the set of columns in the current row
+** that contain one or more instances of a specified phrase. For example:
+**
+** Fts5PhraseIter iter;
+** int iCol;
+** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+** iCol>=0;
+** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+** ){
+** // Column iCol contains at least one instance of phrase iPhrase
+** }
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" option. If the FTS5 table is created with either
+** "detail=none" "content=" option (i.e. if it is a contentless table),
+** then this API always iterates through an empty set (all calls to
+** xPhraseFirstColumn() set iCol to -1).
+**
+** The information accessed using this API and its companion
+** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+** (or xInst/xInstCount). The chief advantage of this API is that it is
+** significantly more efficient than those alternatives when used with
+** "detail=column" tables.
+**
+** xPhraseNextColumn()
+** See xPhraseFirstColumn above.
*/
struct Fts5ExtensionApi {
- int iVersion; /* Currently always set to 1 */
+ int iVersion; /* Currently always set to 3 */
void *(*xUserData)(Fts5Context*);
int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
void *(*xGetAuxdata)(Fts5Context*, int bClear);
- void (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+ int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+ int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+ void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
};
/*
** behaviour. The structure methods are expected to function as follows:
**
** xCreate:
-** This function is used to allocate and inititalize a tokenizer instance.
+** This function is used to allocate and initialize a tokenizer instance.
** A tokenizer instance is required to actually tokenize text.
**
** The first argument passed to this function is a copy of the (void*)
#endif /* _FTS5_H */
-
/*
** 2014 May 31
**
#ifndef _FTS5INT_H
#define _FTS5INT_H
+/* #include "fts5.h" */
/* #include "sqlite3ext.h" */
SQLITE_EXTENSION_INIT1
typedef unsigned char u8;
typedef unsigned int u32;
typedef unsigned short u16;
+typedef short i16;
typedef sqlite3_int64 i64;
typedef sqlite3_uint64 u64;
-#define ArraySize(x) (sizeof(x) / sizeof(x[0]))
+#ifndef ArraySize
+# define ArraySize(x) ((int)(sizeof(x) / sizeof(x[0])))
+#endif
#define testcase(x)
#define ALWAYS(x) 1
#endif
+/* Truncate very long tokens to this many bytes. Hard limit is
+** (65536-1-1-4-9)==65521 bytes. The limiting factor is the 16-bit offset
+** field that occurs at the start of each leaf page (see fts5_index.c). */
+#define FTS5_MAX_TOKEN_SIZE 32768
/*
** Maximum number of prefix indexes on single FTS5 table. This must be
# define assert_nc(x) assert(x)
#endif
+/* Mark a function parameter as unused, to suppress nuisance compiler
+** warnings. */
+#ifndef UNUSED_PARAM
+# define UNUSED_PARAM(X) (void)(X)
+#endif
+
+#ifndef UNUSED_PARAM2
+# define UNUSED_PARAM2(X, Y) (void)(X), (void)(Y)
+#endif
+
typedef struct Fts5Global Fts5Global;
typedef struct Fts5Colset Fts5Colset;
char *zContent; /* content table */
char *zContentRowid; /* "content_rowid=" option value */
int bColumnsize; /* "columnsize=" option value (dflt==1) */
+ int eDetail; /* FTS5_DETAIL_XXX value */
char *zContentExprlist;
Fts5Tokenizer *pTok;
fts5_tokenizer *pTokApi;
int pgsz; /* Approximate page size used in %_data */
int nAutomerge; /* 'automerge' setting */
int nCrisisMerge; /* Maximum allowed segments per level */
+ int nUsermerge; /* 'usermerge' setting */
+ int nHashSize; /* Bytes of memory for in-memory hash */
char *zRank; /* Name of rank function */
char *zRankArgs; /* Arguments to rank function */
#define FTS5_CONTENT_NONE 1
#define FTS5_CONTENT_EXTERNAL 2
+#define FTS5_DETAIL_FULL 0
+#define FTS5_DETAIL_NONE 1
+#define FTS5_DETAIL_COLUMNS 2
int nSpace;
};
-static int sqlite3Fts5BufferGrow(int*, Fts5Buffer*, int);
+static int sqlite3Fts5BufferSize(int*, Fts5Buffer*, u32);
static void sqlite3Fts5BufferAppendVarint(int*, Fts5Buffer*, i64);
-static void sqlite3Fts5BufferAppendBlob(int*, Fts5Buffer*, int, const u8*);
+static void sqlite3Fts5BufferAppendBlob(int*, Fts5Buffer*, u32, const u8*);
static void sqlite3Fts5BufferAppendString(int *, Fts5Buffer*, const char*);
static void sqlite3Fts5BufferFree(Fts5Buffer*);
static void sqlite3Fts5BufferZero(Fts5Buffer*);
static void sqlite3Fts5BufferSet(int*, Fts5Buffer*, int, const u8*);
static void sqlite3Fts5BufferAppendPrintf(int *, Fts5Buffer*, char *zFmt, ...);
-static void sqlite3Fts5BufferAppend32(int*, Fts5Buffer*, int);
static char *sqlite3Fts5Mprintf(int *pRc, const char *zFmt, ...);
#define fts5BufferZero(x) sqlite3Fts5BufferZero(x)
-#define fts5BufferGrow(a,b,c) sqlite3Fts5BufferGrow(a,b,c)
#define fts5BufferAppendVarint(a,b,c) sqlite3Fts5BufferAppendVarint(a,b,c)
#define fts5BufferFree(a) sqlite3Fts5BufferFree(a)
#define fts5BufferAppendBlob(a,b,c,d) sqlite3Fts5BufferAppendBlob(a,b,c,d)
#define fts5BufferSet(a,b,c,d) sqlite3Fts5BufferSet(a,b,c,d)
-#define fts5BufferAppend32(a,b,c) sqlite3Fts5BufferAppend32(a,b,c)
+
+#define fts5BufferGrow(pRc,pBuf,nn) ( \
+ (u32)((pBuf)->n) + (u32)(nn) <= (u32)((pBuf)->nSpace) ? 0 : \
+ sqlite3Fts5BufferSize((pRc),(pBuf),(nn)+(pBuf)->n) \
+)
/* Write and decode big-endian 32-bit integer values */
static void sqlite3Fts5Put32(u8*, int);
i64 iPrev;
};
static int sqlite3Fts5PoslistWriterAppend(Fts5Buffer*, Fts5PoslistWriter*, i64);
+static void sqlite3Fts5PoslistSafeAppend(Fts5Buffer*, i64*, i64);
static int sqlite3Fts5PoslistNext64(
const u8 *a, int n, /* Buffer containing poslist */
/* Character set tests (like isspace(), isalpha() etc.) */
static int sqlite3Fts5IsBareword(char t);
+
+/* Bucket of terms object used by the integrity-check in offsets=0 mode. */
+typedef struct Fts5Termset Fts5Termset;
+static int sqlite3Fts5TermsetNew(Fts5Termset**);
+static int sqlite3Fts5TermsetAdd(Fts5Termset*, int, const char*, int, int *pbPresent);
+static void sqlite3Fts5TermsetFree(Fts5Termset*);
+
/*
** End of interface to code in fts5_buffer.c.
**************************************************************************/
typedef struct Fts5Index Fts5Index;
typedef struct Fts5IndexIter Fts5IndexIter;
+struct Fts5IndexIter {
+ i64 iRowid;
+ const u8 *pData;
+ int nData;
+ u8 bEof;
+};
+
+#define sqlite3Fts5IterEof(x) ((x)->bEof)
+
/*
** Values used as part of the flags argument passed to IndexQuery().
*/
#define FTS5INDEX_QUERY_TEST_NOIDX 0x0004 /* Do not use prefix index */
#define FTS5INDEX_QUERY_SCAN 0x0008 /* Scan query (fts5vocab) */
+/* The following are used internally by the fts5_index.c module. They are
+** defined here only to make it easier to avoid clashes with the flags
+** above. */
+#define FTS5INDEX_QUERY_SKIPEMPTY 0x0010
+#define FTS5INDEX_QUERY_NOOUTPUT 0x0020
+
/*
** Create/destroy an Fts5Index object.
*/
static int sqlite3Fts5IndexClose(Fts5Index *p);
/*
-** for(
-** sqlite3Fts5IndexQuery(p, "token", 5, 0, 0, &pIter);
-** 0==sqlite3Fts5IterEof(pIter);
-** sqlite3Fts5IterNext(pIter)
-** ){
-** i64 iRowid = sqlite3Fts5IterRowid(pIter);
-** }
+** Return a simple checksum value based on the arguments.
+*/
+static u64 sqlite3Fts5IndexEntryCksum(
+ i64 iRowid,
+ int iCol,
+ int iPos,
+ int iIdx,
+ const char *pTerm,
+ int nTerm
+);
+
+/*
+** Argument p points to a buffer containing utf-8 text that is n bytes in
+** size. Return the number of bytes in the nChar character prefix of the
+** buffer, or 0 if there are less than nChar characters in total.
*/
+static int sqlite3Fts5IndexCharlenToBytelen(
+ const char *p,
+ int nByte,
+ int nChar
+);
/*
** Open a new iterator to iterate though all rowids that match the
** The various operations on open token or token prefix iterators opened
** using sqlite3Fts5IndexQuery().
*/
-static int sqlite3Fts5IterEof(Fts5IndexIter*);
static int sqlite3Fts5IterNext(Fts5IndexIter*);
static int sqlite3Fts5IterNextFrom(Fts5IndexIter*, i64 iMatch);
-static i64 sqlite3Fts5IterRowid(Fts5IndexIter*);
-static int sqlite3Fts5IterPoslist(Fts5IndexIter*,Fts5Colset*, const u8**, int*, i64*);
-static int sqlite3Fts5IterPoslistBuffer(Fts5IndexIter *pIter, Fts5Buffer *pBuf);
/*
** Close an iterator opened by sqlite3Fts5IndexQuery().
/*
** Flush any data stored in the in-memory hash tables to the database.
-** If the bCommit flag is true, also close any open blob handles.
+** Also close any open blob handles.
*/
-static int sqlite3Fts5IndexSync(Fts5Index *p, int bCommit);
+static int sqlite3Fts5IndexSync(Fts5Index *p);
/*
** Discard any data stored in the in-memory hash tables. Do not write it
/*
** Functions called by the storage module as part of integrity-check.
*/
-static u64 sqlite3Fts5IndexCksum(Fts5Config*,i64,int,int,const char*,int);
static int sqlite3Fts5IndexIntegrityCheck(Fts5Index*, u64 cksum);
/*
static int sqlite3Fts5IndexReinit(Fts5Index *p);
static int sqlite3Fts5IndexOptimize(Fts5Index *p);
static int sqlite3Fts5IndexMerge(Fts5Index *p, int nMerge);
+static int sqlite3Fts5IndexReset(Fts5Index *p);
static int sqlite3Fts5IndexLoadConfig(Fts5Index *p);
char **pzErr
);
-static Fts5Index *sqlite3Fts5IndexFromCsrid(Fts5Global*, i64, int*);
+static Fts5Index *sqlite3Fts5IndexFromCsrid(Fts5Global*, i64, Fts5Config **);
/*
** End of interface to code in fts5.c.
/*
** Create a hash table, free a hash table.
*/
-static int sqlite3Fts5HashNew(Fts5Hash**, int *pnSize);
+static int sqlite3Fts5HashNew(Fts5Config*, Fts5Hash**, int *pnSize);
static void sqlite3Fts5HashFree(Fts5Hash*);
static int sqlite3Fts5HashWrite(
static int sqlite3Fts5DropAll(Fts5Config*);
static int sqlite3Fts5CreateTable(Fts5Config*, const char*, const char*, int, char **);
-static int sqlite3Fts5StorageDelete(Fts5Storage *p, i64);
+static int sqlite3Fts5StorageDelete(Fts5Storage *p, i64, sqlite3_value**);
static int sqlite3Fts5StorageContentInsert(Fts5Storage *p, sqlite3_value**, i64*);
static int sqlite3Fts5StorageIndexInsert(Fts5Storage *p, sqlite3_value**, i64);
static int sqlite3Fts5StorageSize(Fts5Storage *p, int iCol, i64 *pnAvg);
static int sqlite3Fts5StorageRowCount(Fts5Storage *p, i64 *pnRow);
-static int sqlite3Fts5StorageSync(Fts5Storage *p, int bCommit);
+static int sqlite3Fts5StorageSync(Fts5Storage *p);
static int sqlite3Fts5StorageRollback(Fts5Storage *p);
static int sqlite3Fts5StorageConfigValue(
Fts5Storage *p, const char*, sqlite3_value*, int
);
-static int sqlite3Fts5StorageSpecialDelete(Fts5Storage *p, i64 iDel, sqlite3_value**);
-
static int sqlite3Fts5StorageDeleteAll(Fts5Storage *p);
static int sqlite3Fts5StorageRebuild(Fts5Storage *p);
static int sqlite3Fts5StorageOptimize(Fts5Storage *p);
static int sqlite3Fts5StorageMerge(Fts5Storage *p, int nMerge);
+static int sqlite3Fts5StorageReset(Fts5Storage *p);
/*
** End of interface to code in fts5_storage.c.
/* Parse a MATCH expression. */
static int sqlite3Fts5ExprNew(
Fts5Config *pConfig,
+ int iCol, /* Column on LHS of MATCH operator */
const char *zExpr,
Fts5Expr **ppNew,
char **pzErr
static int sqlite3Fts5ExprPhraseSize(Fts5Expr*, int iPhrase);
static int sqlite3Fts5ExprPoslist(Fts5Expr*, int, const u8 **);
-static int sqlite3Fts5ExprClonePhrase(Fts5Config*, Fts5Expr*, int, Fts5Expr**);
+typedef struct Fts5PoslistPopulator Fts5PoslistPopulator;
+static Fts5PoslistPopulator *sqlite3Fts5ExprClearPoslists(Fts5Expr*, int);
+static int sqlite3Fts5ExprPopulatePoslists(
+ Fts5Config*, Fts5Expr*, Fts5PoslistPopulator*, int, const char*, int
+);
+static void sqlite3Fts5ExprCheckPoslists(Fts5Expr*, i64);
+
+static int sqlite3Fts5ExprClonePhrase(Fts5Expr*, int, Fts5Expr**);
+
+static int sqlite3Fts5ExprPhraseCollist(Fts5Expr *, int, const u8 **, int *);
/*******************************************
** The fts5_expr.c API above this point is used by the other hand-written
Fts5ExprNearset *pNear
);
+static Fts5ExprNode *sqlite3Fts5ParseImplicitAnd(
+ Fts5Parse *pParse,
+ Fts5ExprNode *pLeft,
+ Fts5ExprNode *pRight
+);
+
static Fts5ExprPhrase *sqlite3Fts5ParseTerm(
Fts5Parse *pParse,
Fts5ExprPhrase *pPhrase,
int bPrefix
);
+static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase*);
+
static Fts5ExprNearset *sqlite3Fts5ParseNearset(
Fts5Parse*,
Fts5ExprNearset*,
static void sqlite3Fts5ParseNodeFree(Fts5ExprNode*);
static void sqlite3Fts5ParseSetDistance(Fts5Parse*, Fts5ExprNearset*, Fts5Token*);
-static void sqlite3Fts5ParseSetColset(Fts5Parse*, Fts5ExprNearset*, Fts5Colset*);
+static void sqlite3Fts5ParseSetColset(Fts5Parse*, Fts5ExprNode*, Fts5Colset*);
+static Fts5Colset *sqlite3Fts5ParseColsetInvert(Fts5Parse*, Fts5Colset*);
static void sqlite3Fts5ParseFinished(Fts5Parse *pParse, Fts5ExprNode *p);
static void sqlite3Fts5ParseNear(Fts5Parse *pParse, Fts5Token*);
#define FTS5_NOT 3
#define FTS5_TERM 4
#define FTS5_COLON 5
-#define FTS5_LP 6
-#define FTS5_RP 7
-#define FTS5_LCP 8
-#define FTS5_RCP 9
-#define FTS5_STRING 10
-#define FTS5_COMMA 11
-#define FTS5_PLUS 12
-#define FTS5_STAR 13
-
-/* Driver template for the LEMON parser generator.
-** The author disclaims copyright to this source code.
+#define FTS5_MINUS 6
+#define FTS5_LCP 7
+#define FTS5_RCP 8
+#define FTS5_STRING 9
+#define FTS5_LP 10
+#define FTS5_RP 11
+#define FTS5_CARET 12
+#define FTS5_COMMA 13
+#define FTS5_PLUS 14
+#define FTS5_STAR 15
+
+/*
+** 2000-05-29
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Driver template for the LEMON parser generator.
+**
+** The "lemon" program processes an LALR(1) input grammar file, then uses
+** this template to construct a parser. The "lemon" program inserts text
+** at each "%%" line. Also, any "P-a-r-s-e" identifer prefix (without the
+** interstitial "-" characters) contained in this template is changed into
+** the value of the %name directive from the grammar. Otherwise, the content
+** of this template is copied straight through into the generate parser
+** source file.
**
-** This version of "lempar.c" is modified, slightly, for use by SQLite.
-** The only modifications are the addition of a couple of NEVER()
-** macros to disable tests that are needed in the case of a general
-** LALR(1) grammar but which are always false in the
-** specific grammar used by SQLite.
+** The following is the concatenation of all %include directives from the
+** input grammar file:
*/
-/* First off, code is included that follows the "include" declaration
-** in the input grammar file. */
/* #include <stdio.h> */
+/************ Begin %include sections from the grammar ************************/
+/* #include "fts5Int.h" */
+/* #include "fts5parse.h" */
/*
** Disable all error recovery processing in the parser push-down
*/
#define fts5yytestcase(X) testcase(X)
-/* Next is all token values, in a form suitable for use by makeheaders.
-** This section will be null unless lemon is run with the -m switch.
-*/
-/*
-** These constants (all generated automatically by the parser generator)
-** specify the various kinds of tokens (terminals) that the parser
-** understands.
-**
-** Each symbol here is a terminal symbol in the grammar.
+/*
+** Indicate that sqlite3ParserFree() will never be called with a null
+** pointer.
*/
-/* Make sure the INTERFACE macro is defined.
+#define fts5YYPARSEFREENOTNULL 1
+
+/*
+** Alternative datatype for the argument to the malloc() routine passed
+** into sqlite3ParserAlloc(). The default is size_t.
*/
-#ifndef INTERFACE
-# define INTERFACE 1
-#endif
-/* The next thing included is series of defines which control
+#define fts5YYMALLOCARGTYPE u64
+
+/**************** End of %include directives **********************************/
+/* These constants specify the various numeric values for terminal symbols
+** in a format understandable to "makeheaders". This section is blank unless
+** "lemon" is run with the "-m" command-line option.
+***************** Begin makeheaders token definitions *************************/
+/**************** End makeheaders token definitions ***************************/
+
+/* The next sections is a series of control #defines.
** various aspects of the generated parser.
-** fts5YYCODETYPE is the data type used for storing terminal
-** and nonterminal numbers. "unsigned char" is
-** used if there are fewer than 250 terminals
-** and nonterminals. "int" is used otherwise.
-** fts5YYNOCODE is a number of type fts5YYCODETYPE which corresponds
-** to no legal terminal or nonterminal number. This
-** number is used to fill in empty slots of the hash
-** table.
+** fts5YYCODETYPE is the data type used to store the integer codes
+** that represent terminal and non-terminal symbols.
+** "unsigned char" is used if there are fewer than
+** 256 symbols. Larger types otherwise.
+** fts5YYNOCODE is a number of type fts5YYCODETYPE that is not used for
+** any terminal or nonterminal symbol.
** fts5YYFALLBACK If defined, this indicates that one or more tokens
-** have fall-back values which should be used if the
-** original value of the token will not parse.
-** fts5YYACTIONTYPE is the data type used for storing terminal
-** and nonterminal numbers. "unsigned char" is
-** used if there are fewer than 250 rules and
-** states combined. "int" is used otherwise.
-** sqlite3Fts5ParserFTS5TOKENTYPE is the data type used for minor tokens given
-** directly to the parser from the tokenizer.
-** fts5YYMINORTYPE is the data type used for all minor tokens.
+** (also known as: "terminal symbols") have fall-back
+** values which should be used if the original symbol
+** would not parse. This permits keywords to sometimes
+** be used as identifiers, for example.
+** fts5YYACTIONTYPE is the data type used for "action codes" - numbers
+** that indicate what to do in response to the next
+** token.
+** sqlite3Fts5ParserFTS5TOKENTYPE is the data type used for minor type for terminal
+** symbols. Background: A "minor type" is a semantic
+** value associated with a terminal or non-terminal
+** symbols. For example, for an "ID" terminal symbol,
+** the minor type might be the name of the identifier.
+** Each non-terminal can have a different minor type.
+** Terminal symbols all have the same minor type, though.
+** This macros defines the minor type for terminal
+** symbols.
+** fts5YYMINORTYPE is the data type used for all minor types.
** This is typically a union of many types, one of
** which is sqlite3Fts5ParserFTS5TOKENTYPE. The entry in the union
-** for base tokens is called "fts5yy0".
+** for terminal symbols is called "fts5yy0".
** fts5YYSTACKDEPTH is the maximum depth of the parser's stack. If
** zero the stack is dynamically sized using realloc()
** sqlite3Fts5ParserARG_SDECL A static variable declaration for the %extra_argument
** defined, then do no error processing.
** fts5YYNSTATE the combined number of states.
** fts5YYNRULE the number of rules in the grammar
+** fts5YYNFTS5TOKEN Number of terminal symbols
** fts5YY_MAX_SHIFT Maximum value for shift actions
** fts5YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions
** fts5YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions
-** fts5YY_MIN_REDUCE Maximum value for reduce actions
** fts5YY_ERROR_ACTION The fts5yy_action[] code for syntax error
** fts5YY_ACCEPT_ACTION The fts5yy_action[] code for accept
** fts5YY_NO_ACTION The fts5yy_action[] code for no-op
+** fts5YY_MIN_REDUCE Minimum value for reduce actions
+** fts5YY_MAX_REDUCE Maximum value for reduce actions
*/
+#ifndef INTERFACE
+# define INTERFACE 1
+#endif
+/************* Begin control #defines *****************************************/
#define fts5YYCODETYPE unsigned char
-#define fts5YYNOCODE 27
+#define fts5YYNOCODE 29
#define fts5YYACTIONTYPE unsigned char
#define sqlite3Fts5ParserFTS5TOKENTYPE Fts5Token
typedef union {
int fts5yyinit;
sqlite3Fts5ParserFTS5TOKENTYPE fts5yy0;
- Fts5Colset* fts5yy3;
+ int fts5yy4;
Fts5ExprPhrase* fts5yy11;
- Fts5ExprNode* fts5yy18;
- int fts5yy20;
- Fts5ExprNearset* fts5yy26;
+ Fts5ExprNearset* fts5yy14;
+ Fts5Colset* fts5yy43;
+ Fts5ExprNode* fts5yy54;
} fts5YYMINORTYPE;
#ifndef fts5YYSTACKDEPTH
#define fts5YYSTACKDEPTH 100
#define sqlite3Fts5ParserARG_PDECL ,Fts5Parse *pParse
#define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse = fts5yypParser->pParse
#define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse = pParse
-#define fts5YYNSTATE 26
-#define fts5YYNRULE 24
-#define fts5YY_MAX_SHIFT 25
-#define fts5YY_MIN_SHIFTREDUCE 40
-#define fts5YY_MAX_SHIFTREDUCE 63
-#define fts5YY_MIN_REDUCE 64
-#define fts5YY_MAX_REDUCE 87
-#define fts5YY_ERROR_ACTION 88
-#define fts5YY_ACCEPT_ACTION 89
-#define fts5YY_NO_ACTION 90
-
-/* The fts5yyzerominor constant is used to initialize instances of
-** fts5YYMINORTYPE objects to zero. */
-static const fts5YYMINORTYPE fts5yyzerominor = { 0 };
+#define fts5YYNSTATE 35
+#define fts5YYNRULE 28
+#define fts5YYNFTS5TOKEN 16
+#define fts5YY_MAX_SHIFT 34
+#define fts5YY_MIN_SHIFTREDUCE 52
+#define fts5YY_MAX_SHIFTREDUCE 79
+#define fts5YY_ERROR_ACTION 80
+#define fts5YY_ACCEPT_ACTION 81
+#define fts5YY_NO_ACTION 82
+#define fts5YY_MIN_REDUCE 83
+#define fts5YY_MAX_REDUCE 110
+/************* End control #defines *******************************************/
/* Define the fts5yytestcase() macro to be a no-op if is not already defined
** otherwise.
** N between fts5YY_MIN_SHIFTREDUCE Shift to an arbitrary state then
** and fts5YY_MAX_SHIFTREDUCE reduce by rule N-fts5YY_MIN_SHIFTREDUCE.
**
-** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE
-** and fts5YY_MAX_REDUCE
-
** N == fts5YY_ERROR_ACTION A syntax error has occurred.
**
** N == fts5YY_ACCEPT_ACTION The parser accepts its input.
** N == fts5YY_NO_ACTION No such action. Denotes unused
** slots in the fts5yy_action[] table.
**
+** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE
+** and fts5YY_MAX_REDUCE
+**
** The action table is constructed as a single large table named fts5yy_action[].
-** Given state S and lookahead X, the action is computed as
+** Given state S and lookahead X, the action is computed as either:
**
-** fts5yy_action[ fts5yy_shift_ofst[S] + X ]
+** (A) N = fts5yy_action[ fts5yy_shift_ofst[S] + X ]
+** (B) N = fts5yy_default[S]
**
-** If the index value fts5yy_shift_ofst[S]+X is out of range or if the value
-** fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X or if fts5yy_shift_ofst[S]
-** is equal to fts5YY_SHIFT_USE_DFLT, it means that the action is not in the table
-** and that fts5yy_default[S] should be used instead.
+** The (A) formula is preferred. The B formula is used instead if
+** fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X.
**
-** The formula above is for computing the action when the lookahead is
+** The formulas above are for computing the action when the lookahead is
** a terminal symbol. If the lookahead is a non-terminal (as occurs after
** a reduce action) then the fts5yy_reduce_ofst[] array is used in place of
-** the fts5yy_shift_ofst[] array and fts5YY_REDUCE_USE_DFLT is used in place of
-** fts5YY_SHIFT_USE_DFLT.
+** the fts5yy_shift_ofst[] array.
**
** The following are the tables generated in this section:
**
** fts5yy_reduce_ofst[] For each state, the offset into fts5yy_action for
** shifting non-terminals after a reduce.
** fts5yy_default[] Default action for each state.
-*/
-#define fts5YY_ACTTAB_COUNT (78)
+**
+*********** Begin parsing tables **********************************************/
+#define fts5YY_ACTTAB_COUNT (105)
static const fts5YYACTIONTYPE fts5yy_action[] = {
- /* 0 */ 89, 15, 46, 5, 48, 24, 12, 19, 23, 14,
- /* 10 */ 46, 5, 48, 24, 20, 21, 23, 43, 46, 5,
- /* 20 */ 48, 24, 6, 18, 23, 17, 46, 5, 48, 24,
- /* 30 */ 75, 7, 23, 25, 46, 5, 48, 24, 62, 47,
- /* 40 */ 23, 48, 24, 7, 11, 23, 9, 3, 4, 2,
- /* 50 */ 62, 50, 52, 44, 64, 3, 4, 2, 49, 4,
- /* 60 */ 2, 1, 23, 11, 16, 9, 12, 2, 10, 61,
- /* 70 */ 53, 59, 62, 60, 22, 13, 55, 8,
+ /* 0 */ 81, 20, 96, 6, 28, 99, 98, 26, 26, 18,
+ /* 10 */ 96, 6, 28, 17, 98, 56, 26, 19, 96, 6,
+ /* 20 */ 28, 14, 98, 108, 26, 92, 96, 6, 28, 25,
+ /* 30 */ 98, 78, 26, 21, 96, 6, 28, 107, 98, 58,
+ /* 40 */ 26, 29, 96, 6, 28, 32, 98, 22, 26, 24,
+ /* 50 */ 16, 23, 11, 1, 14, 13, 24, 16, 31, 11,
+ /* 60 */ 3, 97, 13, 27, 8, 98, 82, 26, 7, 4,
+ /* 70 */ 5, 3, 4, 5, 3, 83, 4, 5, 3, 63,
+ /* 80 */ 33, 34, 62, 12, 2, 86, 13, 10, 12, 71,
+ /* 90 */ 10, 13, 78, 5, 3, 78, 9, 30, 75, 82,
+ /* 100 */ 54, 57, 53, 57, 15,
};
static const fts5YYCODETYPE fts5yy_lookahead[] = {
- /* 0 */ 15, 16, 17, 18, 19, 20, 10, 11, 23, 16,
- /* 10 */ 17, 18, 19, 20, 23, 24, 23, 16, 17, 18,
- /* 20 */ 19, 20, 22, 23, 23, 16, 17, 18, 19, 20,
- /* 30 */ 5, 6, 23, 16, 17, 18, 19, 20, 13, 17,
- /* 40 */ 23, 19, 20, 6, 8, 23, 10, 1, 2, 3,
- /* 50 */ 13, 9, 10, 7, 0, 1, 2, 3, 19, 2,
- /* 60 */ 3, 6, 23, 8, 21, 10, 10, 3, 10, 25,
- /* 70 */ 10, 10, 13, 25, 12, 10, 7, 5,
+ /* 0 */ 17, 18, 19, 20, 21, 23, 23, 25, 25, 18,
+ /* 10 */ 19, 20, 21, 7, 23, 9, 25, 18, 19, 20,
+ /* 20 */ 21, 9, 23, 27, 25, 18, 19, 20, 21, 25,
+ /* 30 */ 23, 15, 25, 18, 19, 20, 21, 27, 23, 9,
+ /* 40 */ 25, 18, 19, 20, 21, 14, 23, 22, 25, 6,
+ /* 50 */ 7, 22, 9, 10, 9, 12, 6, 7, 13, 9,
+ /* 60 */ 3, 19, 12, 21, 5, 23, 28, 25, 5, 1,
+ /* 70 */ 2, 3, 1, 2, 3, 0, 1, 2, 3, 11,
+ /* 80 */ 25, 26, 11, 9, 10, 5, 12, 10, 9, 11,
+ /* 90 */ 10, 12, 15, 2, 3, 15, 24, 25, 9, 28,
+ /* 100 */ 8, 9, 8, 9, 9, 28, 28, 28, 28, 28,
+ /* 110 */ 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+ /* 120 */ 28,
};
-#define fts5YY_SHIFT_USE_DFLT (-5)
-#define fts5YY_SHIFT_COUNT (25)
-#define fts5YY_SHIFT_MIN (-4)
-#define fts5YY_SHIFT_MAX (72)
-static const signed char fts5yy_shift_ofst[] = {
- /* 0 */ 55, 55, 55, 55, 55, 36, -4, 56, 58, 25,
- /* 10 */ 37, 60, 59, 59, 46, 54, 42, 57, 62, 61,
- /* 20 */ 62, 69, 65, 62, 72, 64,
+#define fts5YY_SHIFT_COUNT (34)
+#define fts5YY_SHIFT_MIN (0)
+#define fts5YY_SHIFT_MAX (95)
+static const unsigned char fts5yy_shift_ofst[] = {
+ /* 0 */ 43, 43, 43, 43, 43, 43, 50, 74, 79, 45,
+ /* 10 */ 12, 80, 77, 12, 16, 16, 30, 30, 68, 71,
+ /* 20 */ 75, 91, 92, 94, 6, 31, 31, 59, 63, 57,
+ /* 30 */ 31, 89, 95, 31, 78,
};
-#define fts5YY_REDUCE_USE_DFLT (-16)
-#define fts5YY_REDUCE_COUNT (13)
-#define fts5YY_REDUCE_MIN (-15)
-#define fts5YY_REDUCE_MAX (48)
+#define fts5YY_REDUCE_COUNT (17)
+#define fts5YY_REDUCE_MIN (-18)
+#define fts5YY_REDUCE_MAX (72)
static const signed char fts5yy_reduce_ofst[] = {
- /* 0 */ -15, -7, 1, 9, 17, 22, -9, 0, 39, 44,
- /* 10 */ 44, 43, 44, 48,
+ /* 0 */ -17, -9, -1, 7, 15, 23, 42, -18, -18, 55,
+ /* 10 */ 72, -4, -4, 4, -4, 10, 25, 29,
};
static const fts5YYACTIONTYPE fts5yy_default[] = {
- /* 0 */ 88, 88, 88, 88, 88, 69, 82, 88, 88, 87,
- /* 10 */ 87, 88, 87, 87, 88, 88, 88, 66, 80, 88,
- /* 20 */ 81, 88, 88, 78, 88, 65,
+ /* 0 */ 80, 80, 80, 80, 80, 80, 95, 80, 80, 105,
+ /* 10 */ 80, 110, 110, 80, 110, 110, 80, 80, 80, 80,
+ /* 20 */ 80, 91, 80, 80, 80, 101, 100, 80, 80, 90,
+ /* 30 */ 103, 80, 80, 104, 80,
};
+/********** End of lemon-generated parsing tables *****************************/
-/* The next table maps tokens into fallback tokens. If a construct
-** like the following:
+/* The next table maps tokens (terminal symbols) into fallback tokens.
+** If a construct like the following:
**
** %fallback ID X Y Z.
**
** and Z. Whenever one of the tokens X, Y, or Z is input to the parser
** but it does not parse, the type of the token is changed to ID and
** the parse is retried before an error is thrown.
+**
+** This feature can be used, for example, to cause some keywords in a language
+** to revert to identifiers if they keyword does not apply in the context where
+** it appears.
*/
#ifdef fts5YYFALLBACK
static const fts5YYCODETYPE fts5yyFallback[] = {
/* The state of the parser is completely contained in an instance of
** the following structure */
struct fts5yyParser {
- int fts5yyidx; /* Index of top element in stack */
+ fts5yyStackEntry *fts5yytos; /* Pointer to top element of the stack */
#ifdef fts5YYTRACKMAXSTACKDEPTH
- int fts5yyidxMax; /* Maximum value of fts5yyidx */
+ int fts5yyhwm; /* High-water mark of the stack */
#endif
+#ifndef fts5YYNOERRORRECOVERY
int fts5yyerrcnt; /* Shifts left before out of the error */
+#endif
sqlite3Fts5ParserARG_SDECL /* A place to hold %extra_argument */
#if fts5YYSTACKDEPTH<=0
int fts5yystksz; /* Current side of the stack */
fts5yyStackEntry *fts5yystack; /* The parser's stack */
+ fts5yyStackEntry fts5yystk0; /* First stack entry */
#else
fts5yyStackEntry fts5yystack[fts5YYSTACKDEPTH]; /* The parser's stack */
+ fts5yyStackEntry *fts5yystackEnd; /* Last entry in the stack */
#endif
};
typedef struct fts5yyParser fts5yyParser;
}
#endif /* NDEBUG */
-#ifndef NDEBUG
+#if defined(fts5YYCOVERAGE) || !defined(NDEBUG)
/* For tracing shifts, the names of all terminals and nonterminals
** are required. The following table supplies these names */
static const char *const fts5yyTokenName[] = {
- "$", "OR", "AND", "NOT",
- "TERM", "COLON", "LP", "RP",
- "LCP", "RCP", "STRING", "COMMA",
- "PLUS", "STAR", "error", "input",
- "expr", "cnearset", "exprlist", "nearset",
- "colset", "colsetlist", "nearphrases", "phrase",
- "neardist_opt", "star_opt",
+ /* 0 */ "$",
+ /* 1 */ "OR",
+ /* 2 */ "AND",
+ /* 3 */ "NOT",
+ /* 4 */ "TERM",
+ /* 5 */ "COLON",
+ /* 6 */ "MINUS",
+ /* 7 */ "LCP",
+ /* 8 */ "RCP",
+ /* 9 */ "STRING",
+ /* 10 */ "LP",
+ /* 11 */ "RP",
+ /* 12 */ "CARET",
+ /* 13 */ "COMMA",
+ /* 14 */ "PLUS",
+ /* 15 */ "STAR",
+ /* 16 */ "error",
+ /* 17 */ "input",
+ /* 18 */ "expr",
+ /* 19 */ "cnearset",
+ /* 20 */ "exprlist",
+ /* 21 */ "colset",
+ /* 22 */ "colsetlist",
+ /* 23 */ "nearset",
+ /* 24 */ "nearphrases",
+ /* 25 */ "phrase",
+ /* 26 */ "neardist_opt",
+ /* 27 */ "star_opt",
};
-#endif /* NDEBUG */
+#endif /* defined(fts5YYCOVERAGE) || !defined(NDEBUG) */
#ifndef NDEBUG
/* For tracing reduce actions, the names of all rules are required.
*/
static const char *const fts5yyRuleName[] = {
/* 0 */ "input ::= expr",
- /* 1 */ "expr ::= expr AND expr",
- /* 2 */ "expr ::= expr OR expr",
- /* 3 */ "expr ::= expr NOT expr",
- /* 4 */ "expr ::= LP expr RP",
- /* 5 */ "expr ::= exprlist",
- /* 6 */ "exprlist ::= cnearset",
- /* 7 */ "exprlist ::= exprlist cnearset",
- /* 8 */ "cnearset ::= nearset",
- /* 9 */ "cnearset ::= colset COLON nearset",
- /* 10 */ "colset ::= LCP colsetlist RCP",
- /* 11 */ "colset ::= STRING",
- /* 12 */ "colsetlist ::= colsetlist STRING",
- /* 13 */ "colsetlist ::= STRING",
- /* 14 */ "nearset ::= phrase",
- /* 15 */ "nearset ::= STRING LP nearphrases neardist_opt RP",
- /* 16 */ "nearphrases ::= phrase",
- /* 17 */ "nearphrases ::= nearphrases phrase",
- /* 18 */ "neardist_opt ::=",
- /* 19 */ "neardist_opt ::= COMMA STRING",
- /* 20 */ "phrase ::= phrase PLUS STRING star_opt",
- /* 21 */ "phrase ::= STRING star_opt",
- /* 22 */ "star_opt ::= STAR",
- /* 23 */ "star_opt ::=",
+ /* 1 */ "colset ::= MINUS LCP colsetlist RCP",
+ /* 2 */ "colset ::= LCP colsetlist RCP",
+ /* 3 */ "colset ::= STRING",
+ /* 4 */ "colset ::= MINUS STRING",
+ /* 5 */ "colsetlist ::= colsetlist STRING",
+ /* 6 */ "colsetlist ::= STRING",
+ /* 7 */ "expr ::= expr AND expr",
+ /* 8 */ "expr ::= expr OR expr",
+ /* 9 */ "expr ::= expr NOT expr",
+ /* 10 */ "expr ::= colset COLON LP expr RP",
+ /* 11 */ "expr ::= LP expr RP",
+ /* 12 */ "expr ::= exprlist",
+ /* 13 */ "exprlist ::= cnearset",
+ /* 14 */ "exprlist ::= exprlist cnearset",
+ /* 15 */ "cnearset ::= nearset",
+ /* 16 */ "cnearset ::= colset COLON nearset",
+ /* 17 */ "nearset ::= phrase",
+ /* 18 */ "nearset ::= CARET phrase",
+ /* 19 */ "nearset ::= STRING LP nearphrases neardist_opt RP",
+ /* 20 */ "nearphrases ::= phrase",
+ /* 21 */ "nearphrases ::= nearphrases phrase",
+ /* 22 */ "neardist_opt ::=",
+ /* 23 */ "neardist_opt ::= COMMA STRING",
+ /* 24 */ "phrase ::= phrase PLUS STRING star_opt",
+ /* 25 */ "phrase ::= STRING star_opt",
+ /* 26 */ "star_opt ::= STAR",
+ /* 27 */ "star_opt ::=",
};
#endif /* NDEBUG */
#if fts5YYSTACKDEPTH<=0
/*
-** Try to increase the size of the parser stack.
+** Try to increase the size of the parser stack. Return the number
+** of errors. Return 0 on success.
*/
-static void fts5yyGrowStack(fts5yyParser *p){
+static int fts5yyGrowStack(fts5yyParser *p){
int newSize;
+ int idx;
fts5yyStackEntry *pNew;
newSize = p->fts5yystksz*2 + 100;
- pNew = realloc(p->fts5yystack, newSize*sizeof(pNew[0]));
+ idx = p->fts5yytos ? (int)(p->fts5yytos - p->fts5yystack) : 0;
+ if( p->fts5yystack==&p->fts5yystk0 ){
+ pNew = malloc(newSize*sizeof(pNew[0]));
+ if( pNew ) pNew[0] = p->fts5yystk0;
+ }else{
+ pNew = realloc(p->fts5yystack, newSize*sizeof(pNew[0]));
+ }
if( pNew ){
p->fts5yystack = pNew;
- p->fts5yystksz = newSize;
+ p->fts5yytos = &p->fts5yystack[idx];
#ifndef NDEBUG
if( fts5yyTraceFILE ){
- fprintf(fts5yyTraceFILE,"%sStack grows to %d entries!\n",
- fts5yyTracePrompt, p->fts5yystksz);
+ fprintf(fts5yyTraceFILE,"%sStack grows from %d to %d entries.\n",
+ fts5yyTracePrompt, p->fts5yystksz, newSize);
}
#endif
+ p->fts5yystksz = newSize;
}
+ return pNew==0;
}
#endif
+/* Datatype of the argument to the memory allocated passed as the
+** second argument to sqlite3Fts5ParserAlloc() below. This can be changed by
+** putting an appropriate #define in the %include section of the input
+** grammar.
+*/
+#ifndef fts5YYMALLOCARGTYPE
+# define fts5YYMALLOCARGTYPE size_t
+#endif
+
+/* Initialize a new parser that has already been allocated.
+*/
+static void sqlite3Fts5ParserInit(void *fts5yypParser){
+ fts5yyParser *pParser = (fts5yyParser*)fts5yypParser;
+#ifdef fts5YYTRACKMAXSTACKDEPTH
+ pParser->fts5yyhwm = 0;
+#endif
+#if fts5YYSTACKDEPTH<=0
+ pParser->fts5yytos = NULL;
+ pParser->fts5yystack = NULL;
+ pParser->fts5yystksz = 0;
+ if( fts5yyGrowStack(pParser) ){
+ pParser->fts5yystack = &pParser->fts5yystk0;
+ pParser->fts5yystksz = 1;
+ }
+#endif
+#ifndef fts5YYNOERRORRECOVERY
+ pParser->fts5yyerrcnt = -1;
+#endif
+ pParser->fts5yytos = pParser->fts5yystack;
+ pParser->fts5yystack[0].stateno = 0;
+ pParser->fts5yystack[0].major = 0;
+#if fts5YYSTACKDEPTH>0
+ pParser->fts5yystackEnd = &pParser->fts5yystack[fts5YYSTACKDEPTH-1];
+#endif
+}
+
+#ifndef sqlite3Fts5Parser_ENGINEALWAYSONSTACK
/*
** This function allocates a new parser.
** The only argument is a pointer to a function which works like
** A pointer to a parser. This pointer is used in subsequent calls
** to sqlite3Fts5Parser and sqlite3Fts5ParserFree.
*/
-static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(u64)){
+static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(fts5YYMALLOCARGTYPE)){
fts5yyParser *pParser;
- pParser = (fts5yyParser*)(*mallocProc)( (u64)sizeof(fts5yyParser) );
- if( pParser ){
- pParser->fts5yyidx = -1;
-#ifdef fts5YYTRACKMAXSTACKDEPTH
- pParser->fts5yyidxMax = 0;
-#endif
-#if fts5YYSTACKDEPTH<=0
- pParser->fts5yystack = NULL;
- pParser->fts5yystksz = 0;
- fts5yyGrowStack(pParser);
-#endif
- }
+ pParser = (fts5yyParser*)(*mallocProc)( (fts5YYMALLOCARGTYPE)sizeof(fts5yyParser) );
+ if( pParser ) sqlite3Fts5ParserInit(pParser);
return pParser;
}
+#endif /* sqlite3Fts5Parser_ENGINEALWAYSONSTACK */
-/* The following function deletes the value associated with a
-** symbol. The symbol can be either a terminal or nonterminal.
-** "fts5yymajor" is the symbol code, and "fts5yypminor" is a pointer to
-** the value.
+
+/* The following function deletes the "minor type" or semantic value
+** associated with a symbol. The symbol can be either a terminal
+** or nonterminal. "fts5yymajor" is the symbol code, and "fts5yypminor" is
+** a pointer to the value to be deleted. The code used to do the
+** deletions is derived from the %destructor and/or %token_destructor
+** directives of the input grammar.
*/
static void fts5yy_destructor(
fts5yyParser *fts5yypParser, /* The parser */
** being destroyed before it is finished parsing.
**
** Note: during a reduce, the only symbols destroyed are those
- ** which appear on the RHS of the rule, but which are not used
+ ** which appear on the RHS of the rule, but which are *not* used
** inside the C code.
*/
- case 15: /* input */
+/********* Begin destructor definitions ***************************************/
+ case 17: /* input */
{
(void)pParse;
}
break;
- case 16: /* expr */
- case 17: /* cnearset */
- case 18: /* exprlist */
+ case 18: /* expr */
+ case 19: /* cnearset */
+ case 20: /* exprlist */
{
- sqlite3Fts5ParseNodeFree((fts5yypminor->fts5yy18));
+ sqlite3Fts5ParseNodeFree((fts5yypminor->fts5yy54));
}
break;
- case 19: /* nearset */
- case 22: /* nearphrases */
+ case 21: /* colset */
+ case 22: /* colsetlist */
{
- sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy26));
+ sqlite3_free((fts5yypminor->fts5yy43));
}
break;
- case 20: /* colset */
- case 21: /* colsetlist */
+ case 23: /* nearset */
+ case 24: /* nearphrases */
{
- sqlite3_free((fts5yypminor->fts5yy3));
+ sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy14));
}
break;
- case 23: /* phrase */
+ case 25: /* phrase */
{
sqlite3Fts5ParsePhraseFree((fts5yypminor->fts5yy11));
}
break;
+/********* End destructor definitions *****************************************/
default: break; /* If no destructor action specified: do nothing */
}
}
**
** If there is a destructor routine associated with the token which
** is popped from the stack, then call it.
-**
-** Return the major token number for the symbol popped.
*/
-static int fts5yy_pop_parser_stack(fts5yyParser *pParser){
- fts5YYCODETYPE fts5yymajor;
- fts5yyStackEntry *fts5yytos = &pParser->fts5yystack[pParser->fts5yyidx];
-
- /* There is no mechanism by which the parser stack can be popped below
- ** empty in SQLite. */
- assert( pParser->fts5yyidx>=0 );
+static void fts5yy_pop_parser_stack(fts5yyParser *pParser){
+ fts5yyStackEntry *fts5yytos;
+ assert( pParser->fts5yytos!=0 );
+ assert( pParser->fts5yytos > pParser->fts5yystack );
+ fts5yytos = pParser->fts5yytos--;
#ifndef NDEBUG
- if( fts5yyTraceFILE && pParser->fts5yyidx>=0 ){
+ if( fts5yyTraceFILE ){
fprintf(fts5yyTraceFILE,"%sPopping %s\n",
fts5yyTracePrompt,
fts5yyTokenName[fts5yytos->major]);
}
#endif
- fts5yymajor = fts5yytos->major;
- fts5yy_destructor(pParser, fts5yymajor, &fts5yytos->minor);
- pParser->fts5yyidx--;
- return fts5yymajor;
+ fts5yy_destructor(pParser, fts5yytos->major, &fts5yytos->minor);
+}
+
+/*
+** Clear all secondary memory allocations from the parser
+*/
+static void sqlite3Fts5ParserFinalize(void *p){
+ fts5yyParser *pParser = (fts5yyParser*)p;
+ while( pParser->fts5yytos>pParser->fts5yystack ) fts5yy_pop_parser_stack(pParser);
+#if fts5YYSTACKDEPTH<=0
+ if( pParser->fts5yystack!=&pParser->fts5yystk0 ) free(pParser->fts5yystack);
+#endif
}
+#ifndef sqlite3Fts5Parser_ENGINEALWAYSONSTACK
/*
-** Deallocate and destroy a parser. Destructors are all called for
+** Deallocate and destroy a parser. Destructors are called for
** all stack elements before shutting the parser down.
**
-** Inputs:
-** <ul>
-** <li> A pointer to the parser. This should be a pointer
-** obtained from sqlite3Fts5ParserAlloc.
-** <li> A pointer to a function used to reclaim memory obtained
-** from malloc.
-** </ul>
+** If the fts5YYPARSEFREENEVERNULL macro exists (for example because it
+** is defined in a %include section of the input grammar) then it is
+** assumed that the input pointer is never NULL.
*/
static void sqlite3Fts5ParserFree(
void *p, /* The parser to be deleted */
void (*freeProc)(void*) /* Function used to reclaim memory */
){
- fts5yyParser *pParser = (fts5yyParser*)p;
- /* In SQLite, we never try to destroy a parser that was not successfully
- ** created in the first place. */
- if( NEVER(pParser==0) ) return;
- while( pParser->fts5yyidx>=0 ) fts5yy_pop_parser_stack(pParser);
-#if fts5YYSTACKDEPTH<=0
- free(pParser->fts5yystack);
+#ifndef fts5YYPARSEFREENEVERNULL
+ if( p==0 ) return;
#endif
- (*freeProc)((void*)pParser);
+ sqlite3Fts5ParserFinalize(p);
+ (*freeProc)(p);
}
+#endif /* sqlite3Fts5Parser_ENGINEALWAYSONSTACK */
/*
** Return the peak depth of the stack for a parser.
#ifdef fts5YYTRACKMAXSTACKDEPTH
static int sqlite3Fts5ParserStackPeak(void *p){
fts5yyParser *pParser = (fts5yyParser*)p;
- return pParser->fts5yyidxMax;
+ return pParser->fts5yyhwm;
+}
+#endif
+
+/* This array of booleans keeps track of the parser statement
+** coverage. The element fts5yycoverage[X][Y] is set when the parser
+** is in state X and has a lookahead token Y. In a well-tested
+** systems, every element of this matrix should end up being set.
+*/
+#if defined(fts5YYCOVERAGE)
+static unsigned char fts5yycoverage[fts5YYNSTATE][fts5YYNFTS5TOKEN];
+#endif
+
+/*
+** Write into out a description of every state/lookahead combination that
+**
+** (1) has not been used by the parser, and
+** (2) is not a syntax error.
+**
+** Return the number of missed state/lookahead combinations.
+*/
+#if defined(fts5YYCOVERAGE)
+static int sqlite3Fts5ParserCoverage(FILE *out){
+ int stateno, iLookAhead, i;
+ int nMissed = 0;
+ for(stateno=0; stateno<fts5YYNSTATE; stateno++){
+ i = fts5yy_shift_ofst[stateno];
+ for(iLookAhead=0; iLookAhead<fts5YYNFTS5TOKEN; iLookAhead++){
+ if( fts5yy_lookahead[i+iLookAhead]!=iLookAhead ) continue;
+ if( fts5yycoverage[stateno][iLookAhead]==0 ) nMissed++;
+ if( out ){
+ fprintf(out,"State %d lookahead %s %s\n", stateno,
+ fts5yyTokenName[iLookAhead],
+ fts5yycoverage[stateno][iLookAhead] ? "ok" : "missed");
+ }
+ }
+ }
+ return nMissed;
}
#endif
/*
** Find the appropriate action for a parser given the terminal
** look-ahead token iLookAhead.
-**
-** If the look-ahead token is fts5YYNOCODE, then check to see if the action is
-** independent of the look-ahead. If it is, return the action, otherwise
-** return fts5YY_NO_ACTION.
*/
-static int fts5yy_find_shift_action(
+static unsigned int fts5yy_find_shift_action(
fts5yyParser *pParser, /* The parser */
fts5YYCODETYPE iLookAhead /* The look-ahead token */
){
int i;
- int stateno = pParser->fts5yystack[pParser->fts5yyidx].stateno;
+ int stateno = pParser->fts5yytos->stateno;
- if( stateno>=fts5YY_MIN_REDUCE ) return stateno;
+ if( stateno>fts5YY_MAX_SHIFT ) return stateno;
assert( stateno <= fts5YY_SHIFT_COUNT );
- i = fts5yy_shift_ofst[stateno];
- if( i==fts5YY_SHIFT_USE_DFLT ) return fts5yy_default[stateno];
- assert( iLookAhead!=fts5YYNOCODE );
- i += iLookAhead;
- if( i<0 || i>=fts5YY_ACTTAB_COUNT || fts5yy_lookahead[i]!=iLookAhead ){
- if( iLookAhead>0 ){
+#if defined(fts5YYCOVERAGE)
+ fts5yycoverage[stateno][iLookAhead] = 1;
+#endif
+ do{
+ i = fts5yy_shift_ofst[stateno];
+ assert( i>=0 );
+ assert( i+fts5YYNFTS5TOKEN<=(int)sizeof(fts5yy_lookahead)/sizeof(fts5yy_lookahead[0]) );
+ assert( iLookAhead!=fts5YYNOCODE );
+ assert( iLookAhead < fts5YYNFTS5TOKEN );
+ i += iLookAhead;
+ if( fts5yy_lookahead[i]!=iLookAhead ){
#ifdef fts5YYFALLBACK
fts5YYCODETYPE iFallback; /* Fallback token */
if( iLookAhead<sizeof(fts5yyFallback)/sizeof(fts5yyFallback[0])
fts5yyTracePrompt, fts5yyTokenName[iLookAhead], fts5yyTokenName[iFallback]);
}
#endif
- return fts5yy_find_shift_action(pParser, iFallback);
+ assert( fts5yyFallback[iFallback]==0 ); /* Fallback loop must terminate */
+ iLookAhead = iFallback;
+ continue;
}
#endif
#ifdef fts5YYWILDCARD
#if fts5YY_SHIFT_MAX+fts5YYWILDCARD>=fts5YY_ACTTAB_COUNT
j<fts5YY_ACTTAB_COUNT &&
#endif
- fts5yy_lookahead[j]==fts5YYWILDCARD
+ fts5yy_lookahead[j]==fts5YYWILDCARD && iLookAhead>0
){
#ifndef NDEBUG
if( fts5yyTraceFILE ){
fprintf(fts5yyTraceFILE, "%sWILDCARD %s => %s\n",
- fts5yyTracePrompt, fts5yyTokenName[iLookAhead], fts5yyTokenName[fts5YYWILDCARD]);
+ fts5yyTracePrompt, fts5yyTokenName[iLookAhead],
+ fts5yyTokenName[fts5YYWILDCARD]);
}
#endif /* NDEBUG */
return fts5yy_action[j];
}
}
#endif /* fts5YYWILDCARD */
+ return fts5yy_default[stateno];
+ }else{
+ return fts5yy_action[i];
}
- return fts5yy_default[stateno];
- }else{
- return fts5yy_action[i];
- }
+ }while(1);
}
/*
** Find the appropriate action for a parser given the non-terminal
** look-ahead token iLookAhead.
-**
-** If the look-ahead token is fts5YYNOCODE, then check to see if the action is
-** independent of the look-ahead. If it is, return the action, otherwise
-** return fts5YY_NO_ACTION.
*/
static int fts5yy_find_reduce_action(
int stateno, /* Current state number */
assert( stateno<=fts5YY_REDUCE_COUNT );
#endif
i = fts5yy_reduce_ofst[stateno];
- assert( i!=fts5YY_REDUCE_USE_DFLT );
assert( iLookAhead!=fts5YYNOCODE );
i += iLookAhead;
#ifdef fts5YYERRORSYMBOL
/*
** The following routine is called if the stack overflows.
*/
-static void fts5yyStackOverflow(fts5yyParser *fts5yypParser, fts5YYMINORTYPE *fts5yypMinor){
+static void fts5yyStackOverflow(fts5yyParser *fts5yypParser){
sqlite3Fts5ParserARG_FETCH;
- fts5yypParser->fts5yyidx--;
#ifndef NDEBUG
if( fts5yyTraceFILE ){
fprintf(fts5yyTraceFILE,"%sStack Overflow!\n",fts5yyTracePrompt);
}
#endif
- while( fts5yypParser->fts5yyidx>=0 ) fts5yy_pop_parser_stack(fts5yypParser);
+ while( fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ) fts5yy_pop_parser_stack(fts5yypParser);
/* Here code is inserted which will execute if the parser
** stack every overflows */
+/******** Begin %stack_overflow code ******************************************/
- assert( 0 );
+ sqlite3Fts5ParseError(pParse, "fts5: parser stack overflow");
+/******** End %stack_overflow code ********************************************/
sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument var */
}
** Print tracing information for a SHIFT action
*/
#ifndef NDEBUG
-static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState){
+static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState, const char *zTag){
if( fts5yyTraceFILE ){
- int i;
if( fts5yyNewState<fts5YYNSTATE ){
- fprintf(fts5yyTraceFILE,"%sShift %d\n",fts5yyTracePrompt,fts5yyNewState);
- fprintf(fts5yyTraceFILE,"%sStack:",fts5yyTracePrompt);
- for(i=1; i<=fts5yypParser->fts5yyidx; i++)
- fprintf(fts5yyTraceFILE," %s",fts5yyTokenName[fts5yypParser->fts5yystack[i].major]);
- fprintf(fts5yyTraceFILE,"\n");
+ fprintf(fts5yyTraceFILE,"%s%s '%s', go to state %d\n",
+ fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major],
+ fts5yyNewState);
}else{
- fprintf(fts5yyTraceFILE,"%sShift *\n",fts5yyTracePrompt);
+ fprintf(fts5yyTraceFILE,"%s%s '%s', pending reduce %d\n",
+ fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major],
+ fts5yyNewState - fts5YY_MIN_REDUCE);
}
}
}
#else
-# define fts5yyTraceShift(X,Y)
+# define fts5yyTraceShift(X,Y,Z)
#endif
/*
-** Perform a shift action. Return the number of errors.
+** Perform a shift action.
*/
static void fts5yy_shift(
fts5yyParser *fts5yypParser, /* The parser to be shifted */
int fts5yyNewState, /* The new state to shift in */
int fts5yyMajor, /* The major token to shift in */
- fts5YYMINORTYPE *fts5yypMinor /* Pointer to the minor token to shift in */
+ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyMinor /* The minor token to shift in */
){
fts5yyStackEntry *fts5yytos;
- fts5yypParser->fts5yyidx++;
+ fts5yypParser->fts5yytos++;
#ifdef fts5YYTRACKMAXSTACKDEPTH
- if( fts5yypParser->fts5yyidx>fts5yypParser->fts5yyidxMax ){
- fts5yypParser->fts5yyidxMax = fts5yypParser->fts5yyidx;
+ if( (int)(fts5yypParser->fts5yytos - fts5yypParser->fts5yystack)>fts5yypParser->fts5yyhwm ){
+ fts5yypParser->fts5yyhwm++;
+ assert( fts5yypParser->fts5yyhwm == (int)(fts5yypParser->fts5yytos - fts5yypParser->fts5yystack) );
}
#endif
#if fts5YYSTACKDEPTH>0
- if( fts5yypParser->fts5yyidx>=fts5YYSTACKDEPTH ){
- fts5yyStackOverflow(fts5yypParser, fts5yypMinor);
+ if( fts5yypParser->fts5yytos>fts5yypParser->fts5yystackEnd ){
+ fts5yypParser->fts5yytos--;
+ fts5yyStackOverflow(fts5yypParser);
return;
}
#else
- if( fts5yypParser->fts5yyidx>=fts5yypParser->fts5yystksz ){
- fts5yyGrowStack(fts5yypParser);
- if( fts5yypParser->fts5yyidx>=fts5yypParser->fts5yystksz ){
- fts5yyStackOverflow(fts5yypParser, fts5yypMinor);
+ if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5yypParser->fts5yystksz] ){
+ if( fts5yyGrowStack(fts5yypParser) ){
+ fts5yypParser->fts5yytos--;
+ fts5yyStackOverflow(fts5yypParser);
return;
}
}
#endif
- fts5yytos = &fts5yypParser->fts5yystack[fts5yypParser->fts5yyidx];
+ if( fts5yyNewState > fts5YY_MAX_SHIFT ){
+ fts5yyNewState += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE;
+ }
+ fts5yytos = fts5yypParser->fts5yytos;
fts5yytos->stateno = (fts5YYACTIONTYPE)fts5yyNewState;
fts5yytos->major = (fts5YYCODETYPE)fts5yyMajor;
- fts5yytos->minor = *fts5yypMinor;
- fts5yyTraceShift(fts5yypParser, fts5yyNewState);
+ fts5yytos->minor.fts5yy0 = fts5yyMinor;
+ fts5yyTraceShift(fts5yypParser, fts5yyNewState, "Shift");
}
/* The following table contains information about every rule that
** is used during the reduce.
*/
static const struct {
- fts5YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */
- unsigned char nrhs; /* Number of right-hand side symbols in the rule */
+ fts5YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */
+ signed char nrhs; /* Negative of the number of RHS symbols in the rule */
} fts5yyRuleInfo[] = {
- { 15, 1 },
- { 16, 3 },
- { 16, 3 },
- { 16, 3 },
- { 16, 3 },
- { 16, 1 },
- { 18, 1 },
- { 18, 2 },
- { 17, 1 },
- { 17, 3 },
- { 20, 3 },
- { 20, 1 },
- { 21, 2 },
- { 21, 1 },
- { 19, 1 },
- { 19, 5 },
- { 22, 1 },
- { 22, 2 },
- { 24, 0 },
- { 24, 2 },
- { 23, 4 },
- { 23, 2 },
- { 25, 1 },
- { 25, 0 },
+ { 17, -1 }, /* (0) input ::= expr */
+ { 21, -4 }, /* (1) colset ::= MINUS LCP colsetlist RCP */
+ { 21, -3 }, /* (2) colset ::= LCP colsetlist RCP */
+ { 21, -1 }, /* (3) colset ::= STRING */
+ { 21, -2 }, /* (4) colset ::= MINUS STRING */
+ { 22, -2 }, /* (5) colsetlist ::= colsetlist STRING */
+ { 22, -1 }, /* (6) colsetlist ::= STRING */
+ { 18, -3 }, /* (7) expr ::= expr AND expr */
+ { 18, -3 }, /* (8) expr ::= expr OR expr */
+ { 18, -3 }, /* (9) expr ::= expr NOT expr */
+ { 18, -5 }, /* (10) expr ::= colset COLON LP expr RP */
+ { 18, -3 }, /* (11) expr ::= LP expr RP */
+ { 18, -1 }, /* (12) expr ::= exprlist */
+ { 20, -1 }, /* (13) exprlist ::= cnearset */
+ { 20, -2 }, /* (14) exprlist ::= exprlist cnearset */
+ { 19, -1 }, /* (15) cnearset ::= nearset */
+ { 19, -3 }, /* (16) cnearset ::= colset COLON nearset */
+ { 23, -1 }, /* (17) nearset ::= phrase */
+ { 23, -2 }, /* (18) nearset ::= CARET phrase */
+ { 23, -5 }, /* (19) nearset ::= STRING LP nearphrases neardist_opt RP */
+ { 24, -1 }, /* (20) nearphrases ::= phrase */
+ { 24, -2 }, /* (21) nearphrases ::= nearphrases phrase */
+ { 26, 0 }, /* (22) neardist_opt ::= */
+ { 26, -2 }, /* (23) neardist_opt ::= COMMA STRING */
+ { 25, -4 }, /* (24) phrase ::= phrase PLUS STRING star_opt */
+ { 25, -2 }, /* (25) phrase ::= STRING star_opt */
+ { 27, -1 }, /* (26) star_opt ::= STAR */
+ { 27, 0 }, /* (27) star_opt ::= */
};
static void fts5yy_accept(fts5yyParser*); /* Forward Declaration */
/*
** Perform a reduce action and the shift that must immediately
** follow the reduce.
+**
+** The fts5yyLookahead and fts5yyLookaheadToken parameters provide reduce actions
+** access to the lookahead token (if any). The fts5yyLookahead will be fts5YYNOCODE
+** if the lookahead token has already been consumed. As this procedure is
+** only called from one place, optimizing compilers will in-line it, which
+** means that the extra parameters have no performance impact.
*/
static void fts5yy_reduce(
fts5yyParser *fts5yypParser, /* The parser */
- int fts5yyruleno /* Number of the rule by which to reduce */
+ unsigned int fts5yyruleno, /* Number of the rule by which to reduce */
+ int fts5yyLookahead, /* Lookahead token, or fts5YYNOCODE if none */
+ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyLookaheadToken /* Value of the lookahead token */
){
int fts5yygoto; /* The next state */
int fts5yyact; /* The next action */
- fts5YYMINORTYPE fts5yygotominor; /* The LHS of the rule reduced */
fts5yyStackEntry *fts5yymsp; /* The top of the parser's stack */
int fts5yysize; /* Amount to pop the stack */
sqlite3Fts5ParserARG_FETCH;
- fts5yymsp = &fts5yypParser->fts5yystack[fts5yypParser->fts5yyidx];
+ (void)fts5yyLookahead;
+ (void)fts5yyLookaheadToken;
+ fts5yymsp = fts5yypParser->fts5yytos;
#ifndef NDEBUG
- if( fts5yyTraceFILE && fts5yyruleno>=0
- && fts5yyruleno<(int)(sizeof(fts5yyRuleName)/sizeof(fts5yyRuleName[0])) ){
+ if( fts5yyTraceFILE && fts5yyruleno<(int)(sizeof(fts5yyRuleName)/sizeof(fts5yyRuleName[0])) ){
fts5yysize = fts5yyRuleInfo[fts5yyruleno].nrhs;
- fprintf(fts5yyTraceFILE, "%sReduce [%s] -> state %d.\n", fts5yyTracePrompt,
- fts5yyRuleName[fts5yyruleno], fts5yymsp[-fts5yysize].stateno);
+ if( fts5yysize ){
+ fprintf(fts5yyTraceFILE, "%sReduce %d [%s], go to state %d.\n",
+ fts5yyTracePrompt,
+ fts5yyruleno, fts5yyRuleName[fts5yyruleno], fts5yymsp[fts5yysize].stateno);
+ }else{
+ fprintf(fts5yyTraceFILE, "%sReduce %d [%s].\n",
+ fts5yyTracePrompt, fts5yyruleno, fts5yyRuleName[fts5yyruleno]);
+ }
}
#endif /* NDEBUG */
- /* Silence complaints from purify about fts5yygotominor being uninitialized
- ** in some cases when it is copied into the stack after the following
- ** switch. fts5yygotominor is uninitialized when a rule reduces that does
- ** not set the value of its left-hand side nonterminal. Leaving the
- ** value of the nonterminal uninitialized is utterly harmless as long
- ** as the value is never used. So really the only thing this code
- ** accomplishes is to quieten purify.
- **
- ** 2007-01-16: The wireshark project (www.wireshark.org) reports that
- ** without this code, their parser segfaults. I'm not sure what there
- ** parser is doing to make this happen. This is the second bug report
- ** from wireshark this week. Clearly they are stressing Lemon in ways
- ** that it has not been previously stressed... (SQLite ticket #2172)
- */
- /*memset(&fts5yygotominor, 0, sizeof(fts5yygotominor));*/
- fts5yygotominor = fts5yyzerominor;
-
+ /* Check that the stack is large enough to grow by a single entry
+ ** if the RHS of the rule is empty. This ensures that there is room
+ ** enough on the stack to push the LHS value */
+ if( fts5yyRuleInfo[fts5yyruleno].nrhs==0 ){
+#ifdef fts5YYTRACKMAXSTACKDEPTH
+ if( (int)(fts5yypParser->fts5yytos - fts5yypParser->fts5yystack)>fts5yypParser->fts5yyhwm ){
+ fts5yypParser->fts5yyhwm++;
+ assert( fts5yypParser->fts5yyhwm == (int)(fts5yypParser->fts5yytos - fts5yypParser->fts5yystack));
+ }
+#endif
+#if fts5YYSTACKDEPTH>0
+ if( fts5yypParser->fts5yytos>=fts5yypParser->fts5yystackEnd ){
+ fts5yyStackOverflow(fts5yypParser);
+ return;
+ }
+#else
+ if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5yypParser->fts5yystksz-1] ){
+ if( fts5yyGrowStack(fts5yypParser) ){
+ fts5yyStackOverflow(fts5yypParser);
+ return;
+ }
+ fts5yymsp = fts5yypParser->fts5yytos;
+ }
+#endif
+ }
switch( fts5yyruleno ){
/* Beginning here are the reduction cases. A typical example
** #line <lineno> <thisfile>
** break;
*/
+/********** Begin reduce actions **********************************************/
+ fts5YYMINORTYPE fts5yylhsminor;
case 0: /* input ::= expr */
-{ sqlite3Fts5ParseFinished(pParse, fts5yymsp[0].minor.fts5yy18); }
+{ sqlite3Fts5ParseFinished(pParse, fts5yymsp[0].minor.fts5yy54); }
break;
- case 1: /* expr ::= expr AND expr */
-{
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+ case 1: /* colset ::= MINUS LCP colsetlist RCP */
+{
+ fts5yymsp[-3].minor.fts5yy43 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy43);
}
break;
- case 2: /* expr ::= expr OR expr */
+ case 2: /* colset ::= LCP colsetlist RCP */
+{ fts5yymsp[-2].minor.fts5yy43 = fts5yymsp[-1].minor.fts5yy43; }
+ break;
+ case 3: /* colset ::= STRING */
{
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_OR, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+ fts5yylhsminor.fts5yy43 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
}
+ fts5yymsp[0].minor.fts5yy43 = fts5yylhsminor.fts5yy43;
break;
- case 3: /* expr ::= expr NOT expr */
+ case 4: /* colset ::= MINUS STRING */
{
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_NOT, fts5yymsp[-2].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+ fts5yymsp[-1].minor.fts5yy43 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+ fts5yymsp[-1].minor.fts5yy43 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy43);
}
break;
- case 4: /* expr ::= LP expr RP */
-{fts5yygotominor.fts5yy18 = fts5yymsp[-1].minor.fts5yy18;}
+ case 5: /* colsetlist ::= colsetlist STRING */
+{
+ fts5yylhsminor.fts5yy43 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy43, &fts5yymsp[0].minor.fts5yy0); }
+ fts5yymsp[-1].minor.fts5yy43 = fts5yylhsminor.fts5yy43;
break;
- case 5: /* expr ::= exprlist */
- case 6: /* exprlist ::= cnearset */ fts5yytestcase(fts5yyruleno==6);
-{fts5yygotominor.fts5yy18 = fts5yymsp[0].minor.fts5yy18;}
+ case 6: /* colsetlist ::= STRING */
+{
+ fts5yylhsminor.fts5yy43 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+}
+ fts5yymsp[0].minor.fts5yy43 = fts5yylhsminor.fts5yy43;
break;
- case 7: /* exprlist ::= exprlist cnearset */
+ case 7: /* expr ::= expr AND expr */
{
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-1].minor.fts5yy18, fts5yymsp[0].minor.fts5yy18, 0);
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-2].minor.fts5yy54, fts5yymsp[0].minor.fts5yy54, 0);
}
+ fts5yymsp[-2].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 8: /* cnearset ::= nearset */
-{
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy26);
+ case 8: /* expr ::= expr OR expr */
+{
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseNode(pParse, FTS5_OR, fts5yymsp[-2].minor.fts5yy54, fts5yymsp[0].minor.fts5yy54, 0);
}
+ fts5yymsp[-2].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 9: /* cnearset ::= colset COLON nearset */
-{
- sqlite3Fts5ParseSetColset(pParse, fts5yymsp[0].minor.fts5yy26, fts5yymsp[-2].minor.fts5yy3);
- fts5yygotominor.fts5yy18 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy26);
+ case 9: /* expr ::= expr NOT expr */
+{
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseNode(pParse, FTS5_NOT, fts5yymsp[-2].minor.fts5yy54, fts5yymsp[0].minor.fts5yy54, 0);
}
+ fts5yymsp[-2].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
+ break;
+ case 10: /* expr ::= colset COLON LP expr RP */
+{
+ sqlite3Fts5ParseSetColset(pParse, fts5yymsp[-1].minor.fts5yy54, fts5yymsp[-4].minor.fts5yy43);
+ fts5yylhsminor.fts5yy54 = fts5yymsp[-1].minor.fts5yy54;
+}
+ fts5yymsp[-4].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
+ break;
+ case 11: /* expr ::= LP expr RP */
+{fts5yymsp[-2].minor.fts5yy54 = fts5yymsp[-1].minor.fts5yy54;}
break;
- case 10: /* colset ::= LCP colsetlist RCP */
-{ fts5yygotominor.fts5yy3 = fts5yymsp[-1].minor.fts5yy3; }
+ case 12: /* expr ::= exprlist */
+ case 13: /* exprlist ::= cnearset */ fts5yytestcase(fts5yyruleno==13);
+{fts5yylhsminor.fts5yy54 = fts5yymsp[0].minor.fts5yy54;}
+ fts5yymsp[0].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 11: /* colset ::= STRING */
+ case 14: /* exprlist ::= exprlist cnearset */
{
- fts5yygotominor.fts5yy3 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseImplicitAnd(pParse, fts5yymsp[-1].minor.fts5yy54, fts5yymsp[0].minor.fts5yy54);
}
+ fts5yymsp[-1].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 12: /* colsetlist ::= colsetlist STRING */
+ case 15: /* cnearset ::= nearset */
{
- fts5yygotominor.fts5yy3 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy3, &fts5yymsp[0].minor.fts5yy0); }
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy14);
+}
+ fts5yymsp[0].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 13: /* colsetlist ::= STRING */
+ case 16: /* cnearset ::= colset COLON nearset */
{
- fts5yygotominor.fts5yy3 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0);
+ fts5yylhsminor.fts5yy54 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy14);
+ sqlite3Fts5ParseSetColset(pParse, fts5yylhsminor.fts5yy54, fts5yymsp[-2].minor.fts5yy43);
}
+ fts5yymsp[-2].minor.fts5yy54 = fts5yylhsminor.fts5yy54;
break;
- case 14: /* nearset ::= phrase */
-{ fts5yygotominor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11); }
+ case 17: /* nearset ::= phrase */
+{ fts5yylhsminor.fts5yy14 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11); }
+ fts5yymsp[0].minor.fts5yy14 = fts5yylhsminor.fts5yy14;
break;
- case 15: /* nearset ::= STRING LP nearphrases neardist_opt RP */
+ case 18: /* nearset ::= CARET phrase */
+{
+ sqlite3Fts5ParseSetCaret(fts5yymsp[0].minor.fts5yy11);
+ fts5yymsp[-1].minor.fts5yy14 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11);
+}
+ break;
+ case 19: /* nearset ::= STRING LP nearphrases neardist_opt RP */
{
sqlite3Fts5ParseNear(pParse, &fts5yymsp[-4].minor.fts5yy0);
- sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy26, &fts5yymsp[-1].minor.fts5yy0);
- fts5yygotominor.fts5yy26 = fts5yymsp[-2].minor.fts5yy26;
+ sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy14, &fts5yymsp[-1].minor.fts5yy0);
+ fts5yylhsminor.fts5yy14 = fts5yymsp[-2].minor.fts5yy14;
}
+ fts5yymsp[-4].minor.fts5yy14 = fts5yylhsminor.fts5yy14;
break;
- case 16: /* nearphrases ::= phrase */
+ case 20: /* nearphrases ::= phrase */
{
- fts5yygotominor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11);
+ fts5yylhsminor.fts5yy14 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy11);
}
+ fts5yymsp[0].minor.fts5yy14 = fts5yylhsminor.fts5yy14;
break;
- case 17: /* nearphrases ::= nearphrases phrase */
+ case 21: /* nearphrases ::= nearphrases phrase */
{
- fts5yygotominor.fts5yy26 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy26, fts5yymsp[0].minor.fts5yy11);
+ fts5yylhsminor.fts5yy14 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy14, fts5yymsp[0].minor.fts5yy11);
}
+ fts5yymsp[-1].minor.fts5yy14 = fts5yylhsminor.fts5yy14;
break;
- case 18: /* neardist_opt ::= */
-{ fts5yygotominor.fts5yy0.p = 0; fts5yygotominor.fts5yy0.n = 0; }
+ case 22: /* neardist_opt ::= */
+{ fts5yymsp[1].minor.fts5yy0.p = 0; fts5yymsp[1].minor.fts5yy0.n = 0; }
break;
- case 19: /* neardist_opt ::= COMMA STRING */
-{ fts5yygotominor.fts5yy0 = fts5yymsp[0].minor.fts5yy0; }
+ case 23: /* neardist_opt ::= COMMA STRING */
+{ fts5yymsp[-1].minor.fts5yy0 = fts5yymsp[0].minor.fts5yy0; }
break;
- case 20: /* phrase ::= phrase PLUS STRING star_opt */
+ case 24: /* phrase ::= phrase PLUS STRING star_opt */
{
- fts5yygotominor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy11, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy20);
+ fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy11, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4);
}
+ fts5yymsp[-3].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
break;
- case 21: /* phrase ::= STRING star_opt */
+ case 25: /* phrase ::= STRING star_opt */
{
- fts5yygotominor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy20);
+ fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4);
}
+ fts5yymsp[-1].minor.fts5yy11 = fts5yylhsminor.fts5yy11;
break;
- case 22: /* star_opt ::= STAR */
-{ fts5yygotominor.fts5yy20 = 1; }
+ case 26: /* star_opt ::= STAR */
+{ fts5yymsp[0].minor.fts5yy4 = 1; }
break;
- case 23: /* star_opt ::= */
-{ fts5yygotominor.fts5yy20 = 0; }
+ case 27: /* star_opt ::= */
+{ fts5yymsp[1].minor.fts5yy4 = 0; }
break;
default:
break;
+/********** End reduce actions ************************************************/
};
- assert( fts5yyruleno>=0 && fts5yyruleno<sizeof(fts5yyRuleInfo)/sizeof(fts5yyRuleInfo[0]) );
+ assert( fts5yyruleno<sizeof(fts5yyRuleInfo)/sizeof(fts5yyRuleInfo[0]) );
fts5yygoto = fts5yyRuleInfo[fts5yyruleno].lhs;
fts5yysize = fts5yyRuleInfo[fts5yyruleno].nrhs;
- fts5yypParser->fts5yyidx -= fts5yysize;
- fts5yyact = fts5yy_find_reduce_action(fts5yymsp[-fts5yysize].stateno,(fts5YYCODETYPE)fts5yygoto);
- if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){
- if( fts5yyact>fts5YY_MAX_SHIFT ) fts5yyact += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE;
- /* If the reduce action popped at least
- ** one element off the stack, then we can push the new element back
- ** onto the stack here, and skip the stack overflow test in fts5yy_shift().
- ** That gives a significant speed improvement. */
- if( fts5yysize ){
- fts5yypParser->fts5yyidx++;
- fts5yymsp -= fts5yysize-1;
- fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact;
- fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto;
- fts5yymsp->minor = fts5yygotominor;
- fts5yyTraceShift(fts5yypParser, fts5yyact);
- }else{
- fts5yy_shift(fts5yypParser,fts5yyact,fts5yygoto,&fts5yygotominor);
- }
- }else{
- assert( fts5yyact == fts5YY_ACCEPT_ACTION );
- fts5yy_accept(fts5yypParser);
- }
+ fts5yyact = fts5yy_find_reduce_action(fts5yymsp[fts5yysize].stateno,(fts5YYCODETYPE)fts5yygoto);
+
+ /* There are no SHIFTREDUCE actions on nonterminals because the table
+ ** generator has simplified them to pure REDUCE actions. */
+ assert( !(fts5yyact>fts5YY_MAX_SHIFT && fts5yyact<=fts5YY_MAX_SHIFTREDUCE) );
+
+ /* It is not possible for a REDUCE to be followed by an error */
+ assert( fts5yyact!=fts5YY_ERROR_ACTION );
+
+ fts5yymsp += fts5yysize+1;
+ fts5yypParser->fts5yytos = fts5yymsp;
+ fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact;
+ fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto;
+ fts5yyTraceShift(fts5yypParser, fts5yyact, "... then shift");
}
/*
fprintf(fts5yyTraceFILE,"%sFail!\n",fts5yyTracePrompt);
}
#endif
- while( fts5yypParser->fts5yyidx>=0 ) fts5yy_pop_parser_stack(fts5yypParser);
+ while( fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ) fts5yy_pop_parser_stack(fts5yypParser);
/* Here code is inserted which will be executed whenever the
** parser fails */
+/************ Begin %parse_failure code ***************************************/
+/************ End %parse_failure code *****************************************/
sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
#endif /* fts5YYNOERRORRECOVERY */
static void fts5yy_syntax_error(
fts5yyParser *fts5yypParser, /* The parser */
int fts5yymajor, /* The major type of the error token */
- fts5YYMINORTYPE fts5yyminor /* The minor type of the error token */
+ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyminor /* The minor type of the error token */
){
sqlite3Fts5ParserARG_FETCH;
-#define FTS5TOKEN (fts5yyminor.fts5yy0)
+#define FTS5TOKEN fts5yyminor
+/************ Begin %syntax_error code ****************************************/
+ UNUSED_PARAM(fts5yymajor); /* Silence a compiler warning */
sqlite3Fts5ParseError(
pParse, "fts5: syntax error near \"%.*s\"",FTS5TOKEN.n,FTS5TOKEN.p
);
+/************ End %syntax_error code ******************************************/
sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
fprintf(fts5yyTraceFILE,"%sAccept!\n",fts5yyTracePrompt);
}
#endif
- while( fts5yypParser->fts5yyidx>=0 ) fts5yy_pop_parser_stack(fts5yypParser);
+#ifndef fts5YYNOERRORRECOVERY
+ fts5yypParser->fts5yyerrcnt = -1;
+#endif
+ assert( fts5yypParser->fts5yytos==fts5yypParser->fts5yystack );
/* Here code is inserted which will be executed whenever the
** parser accepts */
+/*********** Begin %parse_accept code *****************************************/
+/*********** End %parse_accept code *******************************************/
sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */
}
sqlite3Fts5ParserARG_PDECL /* Optional %extra_argument parameter */
){
fts5YYMINORTYPE fts5yyminorunion;
- int fts5yyact; /* The parser action. */
+ unsigned int fts5yyact; /* The parser action. */
#if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY)
int fts5yyendofinput; /* True if we are at the end of input */
#endif
#endif
fts5yyParser *fts5yypParser; /* The parser */
- /* (re)initialize the parser, if necessary */
fts5yypParser = (fts5yyParser*)fts5yyp;
- if( fts5yypParser->fts5yyidx<0 ){
-#if fts5YYSTACKDEPTH<=0
- if( fts5yypParser->fts5yystksz <=0 ){
- /*memset(&fts5yyminorunion, 0, sizeof(fts5yyminorunion));*/
- fts5yyminorunion = fts5yyzerominor;
- fts5yyStackOverflow(fts5yypParser, &fts5yyminorunion);
- return;
- }
-#endif
- fts5yypParser->fts5yyidx = 0;
- fts5yypParser->fts5yyerrcnt = -1;
- fts5yypParser->fts5yystack[0].stateno = 0;
- fts5yypParser->fts5yystack[0].major = 0;
- }
- fts5yyminorunion.fts5yy0 = fts5yyminor;
+ assert( fts5yypParser->fts5yytos!=0 );
#if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY)
fts5yyendofinput = (fts5yymajor==0);
#endif
#ifndef NDEBUG
if( fts5yyTraceFILE ){
- fprintf(fts5yyTraceFILE,"%sInput %s\n",fts5yyTracePrompt,fts5yyTokenName[fts5yymajor]);
+ int stateno = fts5yypParser->fts5yytos->stateno;
+ if( stateno < fts5YY_MIN_REDUCE ){
+ fprintf(fts5yyTraceFILE,"%sInput '%s' in state %d\n",
+ fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],stateno);
+ }else{
+ fprintf(fts5yyTraceFILE,"%sInput '%s' with pending reduce %d\n",
+ fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],stateno-fts5YY_MIN_REDUCE);
+ }
}
#endif
do{
fts5yyact = fts5yy_find_shift_action(fts5yypParser,(fts5YYCODETYPE)fts5yymajor);
- if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){
- if( fts5yyact > fts5YY_MAX_SHIFT ) fts5yyact += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE;
- fts5yy_shift(fts5yypParser,fts5yyact,fts5yymajor,&fts5yyminorunion);
+ if( fts5yyact >= fts5YY_MIN_REDUCE ){
+ fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE,fts5yymajor,fts5yyminor);
+ }else if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){
+ fts5yy_shift(fts5yypParser,fts5yyact,fts5yymajor,fts5yyminor);
+#ifndef fts5YYNOERRORRECOVERY
fts5yypParser->fts5yyerrcnt--;
+#endif
fts5yymajor = fts5YYNOCODE;
- }else if( fts5yyact <= fts5YY_MAX_REDUCE ){
- fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE);
+ }else if( fts5yyact==fts5YY_ACCEPT_ACTION ){
+ fts5yypParser->fts5yytos--;
+ fts5yy_accept(fts5yypParser);
+ return;
}else{
assert( fts5yyact == fts5YY_ERROR_ACTION );
+ fts5yyminorunion.fts5yy0 = fts5yyminor;
#ifdef fts5YYERRORSYMBOL
int fts5yymx;
#endif
**
*/
if( fts5yypParser->fts5yyerrcnt<0 ){
- fts5yy_syntax_error(fts5yypParser,fts5yymajor,fts5yyminorunion);
+ fts5yy_syntax_error(fts5yypParser,fts5yymajor,fts5yyminor);
}
- fts5yymx = fts5yypParser->fts5yystack[fts5yypParser->fts5yyidx].major;
+ fts5yymx = fts5yypParser->fts5yytos->major;
if( fts5yymx==fts5YYERRORSYMBOL || fts5yyerrorhit ){
#ifndef NDEBUG
if( fts5yyTraceFILE ){
fts5yyTracePrompt,fts5yyTokenName[fts5yymajor]);
}
#endif
- fts5yy_destructor(fts5yypParser, (fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion);
+ fts5yy_destructor(fts5yypParser, (fts5YYCODETYPE)fts5yymajor, &fts5yyminorunion);
fts5yymajor = fts5YYNOCODE;
}else{
- while(
- fts5yypParser->fts5yyidx >= 0 &&
- fts5yymx != fts5YYERRORSYMBOL &&
- (fts5yyact = fts5yy_find_reduce_action(
- fts5yypParser->fts5yystack[fts5yypParser->fts5yyidx].stateno,
+ while( fts5yypParser->fts5yytos >= fts5yypParser->fts5yystack
+ && fts5yymx != fts5YYERRORSYMBOL
+ && (fts5yyact = fts5yy_find_reduce_action(
+ fts5yypParser->fts5yytos->stateno,
fts5YYERRORSYMBOL)) >= fts5YY_MIN_REDUCE
){
fts5yy_pop_parser_stack(fts5yypParser);
}
- if( fts5yypParser->fts5yyidx < 0 || fts5yymajor==0 ){
+ if( fts5yypParser->fts5yytos < fts5yypParser->fts5yystack || fts5yymajor==0 ){
fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion);
fts5yy_parse_failed(fts5yypParser);
+#ifndef fts5YYNOERRORRECOVERY
+ fts5yypParser->fts5yyerrcnt = -1;
+#endif
fts5yymajor = fts5YYNOCODE;
}else if( fts5yymx!=fts5YYERRORSYMBOL ){
- fts5YYMINORTYPE u2;
- u2.fts5YYERRSYMDT = 0;
- fts5yy_shift(fts5yypParser,fts5yyact,fts5YYERRORSYMBOL,&u2);
+ fts5yy_shift(fts5yypParser,fts5yyact,fts5YYERRORSYMBOL,fts5yyminor);
}
}
fts5yypParser->fts5yyerrcnt = 3;
** Applications can set this macro (for example inside %include) if
** they intend to abandon the parse upon the first syntax error seen.
*/
- fts5yy_syntax_error(fts5yypParser,fts5yymajor,fts5yyminorunion);
+ fts5yy_syntax_error(fts5yypParser,fts5yymajor, fts5yyminor);
fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion);
fts5yymajor = fts5YYNOCODE;
** three input tokens have been successfully shifted.
*/
if( fts5yypParser->fts5yyerrcnt<=0 ){
- fts5yy_syntax_error(fts5yypParser,fts5yymajor,fts5yyminorunion);
+ fts5yy_syntax_error(fts5yypParser,fts5yymajor, fts5yyminor);
}
fts5yypParser->fts5yyerrcnt = 3;
fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion);
if( fts5yyendofinput ){
fts5yy_parse_failed(fts5yypParser);
+#ifndef fts5YYNOERRORRECOVERY
+ fts5yypParser->fts5yyerrcnt = -1;
+#endif
}
fts5yymajor = fts5YYNOCODE;
#endif
}
- }while( fts5yymajor!=fts5YYNOCODE && fts5yypParser->fts5yyidx>=0 );
+ }while( fts5yymajor!=fts5YYNOCODE && fts5yypParser->fts5yytos>fts5yypParser->fts5yystack );
#ifndef NDEBUG
if( fts5yyTraceFILE ){
- fprintf(fts5yyTraceFILE,"%sReturn\n",fts5yyTracePrompt);
+ fts5yyStackEntry *i;
+ char cDiv = '[';
+ fprintf(fts5yyTraceFILE,"%sReturn. Stack=",fts5yyTracePrompt);
+ for(i=&fts5yypParser->fts5yystack[1]; i<=fts5yypParser->fts5yytos; i++){
+ fprintf(fts5yyTraceFILE,"%c%s", cDiv, fts5yyTokenName[i->major]);
+ cDiv = ' ';
+ }
+ fprintf(fts5yyTraceFILE,"]\n");
}
#endif
return;
*/
+/* #include "fts5Int.h" */
#include <math.h> /* amalgamator: keep */
/*
const char *z, int n
){
if( *pRc==SQLITE_OK ){
- if( n<0 ) n = strlen(z);
+ if( n<0 ) n = (int)strlen(z);
p->zOut = sqlite3_mprintf("%z%.*s", p->zOut, n, z);
if( p->zOut==0 ) *pRc = SQLITE_NOMEM;
}
int rc = SQLITE_OK;
int iPos;
+ UNUSED_PARAM2(pToken, nToken);
+
if( tflags & FTS5_TOKEN_COLOCATED ) return SQLITE_OK;
iPos = p->iPos++;
if( p->iRangeEnd>0 && iPos==p->iRangeEnd ){
fts5HighlightAppend(&rc, p, &p->zIn[p->iOff], iEndOff - p->iOff);
p->iOff = iEndOff;
- if( iPos<p->iter.iEnd ){
+ if( iPos>=p->iter.iStart && iPos<p->iter.iEnd ){
fts5HighlightAppend(&rc, p, p->zClose, -1);
}
}
** End of highlight() implementation.
**************************************************************************/
+/*
+** Context object passed to the fts5SentenceFinderCb() function.
+*/
+typedef struct Fts5SFinder Fts5SFinder;
+struct Fts5SFinder {
+ int iPos; /* Current token position */
+ int nFirstAlloc; /* Allocated size of aFirst[] */
+ int nFirst; /* Number of entries in aFirst[] */
+ int *aFirst; /* Array of first token in each sentence */
+ const char *zDoc; /* Document being tokenized */
+};
+
+/*
+** Add an entry to the Fts5SFinder.aFirst[] array. Grow the array if
+** necessary. Return SQLITE_OK if successful, or SQLITE_NOMEM if an
+** error occurs.
+*/
+static int fts5SentenceFinderAdd(Fts5SFinder *p, int iAdd){
+ if( p->nFirstAlloc==p->nFirst ){
+ int nNew = p->nFirstAlloc ? p->nFirstAlloc*2 : 64;
+ int *aNew;
+
+ aNew = (int*)sqlite3_realloc(p->aFirst, nNew*sizeof(int));
+ if( aNew==0 ) return SQLITE_NOMEM;
+ p->aFirst = aNew;
+ p->nFirstAlloc = nNew;
+ }
+ p->aFirst[p->nFirst++] = iAdd;
+ return SQLITE_OK;
+}
+
+/*
+** This function is an xTokenize() callback used by the auxiliary snippet()
+** function. Its job is to identify tokens that are the first in a sentence.
+** For each such token, an entry is added to the SFinder.aFirst[] array.
+*/
+static int fts5SentenceFinderCb(
+ void *pContext, /* Pointer to HighlightContext object */
+ int tflags, /* Mask of FTS5_TOKEN_* flags */
+ const char *pToken, /* Buffer containing token */
+ int nToken, /* Size of token in bytes */
+ int iStartOff, /* Start offset of token */
+ int iEndOff /* End offset of token */
+){
+ int rc = SQLITE_OK;
+
+ UNUSED_PARAM2(pToken, nToken);
+ UNUSED_PARAM(iEndOff);
+
+ if( (tflags & FTS5_TOKEN_COLOCATED)==0 ){
+ Fts5SFinder *p = (Fts5SFinder*)pContext;
+ if( p->iPos>0 ){
+ int i;
+ char c = 0;
+ for(i=iStartOff-1; i>=0; i--){
+ c = p->zDoc[i];
+ if( c!=' ' && c!='\t' && c!='\n' && c!='\r' ) break;
+ }
+ if( i!=iStartOff-1 && (c=='.' || c==':') ){
+ rc = fts5SentenceFinderAdd(p, p->iPos);
+ }
+ }else{
+ rc = fts5SentenceFinderAdd(p, 0);
+ }
+ p->iPos++;
+ }
+ return rc;
+}
+
+static int fts5SnippetScore(
+ const Fts5ExtensionApi *pApi, /* API offered by current FTS version */
+ Fts5Context *pFts, /* First arg to pass to pApi functions */
+ int nDocsize, /* Size of column in tokens */
+ unsigned char *aSeen, /* Array with one element per query phrase */
+ int iCol, /* Column to score */
+ int iPos, /* Starting offset to score */
+ int nToken, /* Max tokens per snippet */
+ int *pnScore, /* OUT: Score */
+ int *piPos /* OUT: Adjusted offset */
+){
+ int rc;
+ int i;
+ int ip = 0;
+ int ic = 0;
+ int iOff = 0;
+ int iFirst = -1;
+ int nInst;
+ int nScore = 0;
+ int iLast = 0;
+
+ rc = pApi->xInstCount(pFts, &nInst);
+ for(i=0; i<nInst && rc==SQLITE_OK; i++){
+ rc = pApi->xInst(pFts, i, &ip, &ic, &iOff);
+ if( rc==SQLITE_OK && ic==iCol && iOff>=iPos && iOff<(iPos+nToken) ){
+ nScore += (aSeen[ip] ? 1 : 1000);
+ aSeen[ip] = 1;
+ if( iFirst<0 ) iFirst = iOff;
+ iLast = iOff + pApi->xPhraseSize(pFts, ip);
+ }
+ }
+
+ *pnScore = nScore;
+ if( piPos ){
+ int iAdj = iFirst - (nToken - (iLast-iFirst)) / 2;
+ if( (iAdj+nToken)>nDocsize ) iAdj = nDocsize - nToken;
+ if( iAdj<0 ) iAdj = 0;
+ *piPos = iAdj;
+ }
+
+ return rc;
+}
+
+/*
+** Return the value in pVal interpreted as utf-8 text. Except, if pVal
+** contains a NULL value, return a pointer to a static string zero
+** bytes in length instead of a NULL pointer.
+*/
+static const char *fts5ValueToText(sqlite3_value *pVal){
+ const char *zRet = (const char*)sqlite3_value_text(pVal);
+ return zRet ? zRet : "";
+}
+
/*
** Implementation of snippet() function.
*/
unsigned char *aSeen; /* Array of "seen instance" flags */
int iBestCol; /* Column containing best snippet */
int iBestStart = 0; /* First token of best snippet */
- int iBestLast; /* Last token of best snippet */
int nBestScore = 0; /* Score of best snippet */
int nColSize = 0; /* Total size of iBestCol in tokens */
+ Fts5SFinder sFinder; /* Used to find the beginnings of sentences */
+ int nCol;
if( nVal!=5 ){
const char *zErr = "wrong number of arguments to function snippet()";
return;
}
+ nCol = pApi->xColumnCount(pFts);
memset(&ctx, 0, sizeof(HighlightContext));
iCol = sqlite3_value_int(apVal[0]);
- ctx.zOpen = (const char*)sqlite3_value_text(apVal[1]);
- ctx.zClose = (const char*)sqlite3_value_text(apVal[2]);
- zEllips = (const char*)sqlite3_value_text(apVal[3]);
+ ctx.zOpen = fts5ValueToText(apVal[1]);
+ ctx.zClose = fts5ValueToText(apVal[2]);
+ zEllips = fts5ValueToText(apVal[3]);
nToken = sqlite3_value_int(apVal[4]);
- iBestLast = nToken-1;
iBestCol = (iCol>=0 ? iCol : 0);
nPhrase = pApi->xPhraseCount(pFts);
if( aSeen==0 ){
rc = SQLITE_NOMEM;
}
-
if( rc==SQLITE_OK ){
rc = pApi->xInstCount(pFts, &nInst);
}
- for(i=0; rc==SQLITE_OK && i<nInst; i++){
- int ip, iSnippetCol, iStart;
- memset(aSeen, 0, nPhrase);
- rc = pApi->xInst(pFts, i, &ip, &iSnippetCol, &iStart);
- if( rc==SQLITE_OK && (iCol<0 || iSnippetCol==iCol) ){
- int nScore = 1000;
- int iLast = iStart - 1 + pApi->xPhraseSize(pFts, ip);
- int j;
- aSeen[ip] = 1;
- for(j=i+1; rc==SQLITE_OK && j<nInst; j++){
- int ic; int io; int iFinal;
- rc = pApi->xInst(pFts, j, &ip, &ic, &io);
- iFinal = io + pApi->xPhraseSize(pFts, ip) - 1;
- if( rc==SQLITE_OK && ic==iSnippetCol && iLast<iStart+nToken ){
- nScore += aSeen[ip] ? 1000 : 1;
- aSeen[ip] = 1;
- if( iFinal>iLast ) iLast = iFinal;
+ memset(&sFinder, 0, sizeof(Fts5SFinder));
+ for(i=0; i<nCol; i++){
+ if( iCol<0 || iCol==i ){
+ int nDoc;
+ int nDocsize;
+ int ii;
+ sFinder.iPos = 0;
+ sFinder.nFirst = 0;
+ rc = pApi->xColumnText(pFts, i, &sFinder.zDoc, &nDoc);
+ if( rc!=SQLITE_OK ) break;
+ rc = pApi->xTokenize(pFts,
+ sFinder.zDoc, nDoc, (void*)&sFinder,fts5SentenceFinderCb
+ );
+ if( rc!=SQLITE_OK ) break;
+ rc = pApi->xColumnSize(pFts, i, &nDocsize);
+ if( rc!=SQLITE_OK ) break;
+
+ for(ii=0; rc==SQLITE_OK && ii<nInst; ii++){
+ int ip, ic, io;
+ int iAdj;
+ int nScore;
+ int jj;
+
+ rc = pApi->xInst(pFts, ii, &ip, &ic, &io);
+ if( ic!=i || rc!=SQLITE_OK ) continue;
+ memset(aSeen, 0, nPhrase);
+ rc = fts5SnippetScore(pApi, pFts, nDocsize, aSeen, i,
+ io, nToken, &nScore, &iAdj
+ );
+ if( rc==SQLITE_OK && nScore>nBestScore ){
+ nBestScore = nScore;
+ iBestCol = i;
+ iBestStart = iAdj;
+ nColSize = nDocsize;
}
- }
- if( rc==SQLITE_OK && nScore>nBestScore ){
- iBestCol = iSnippetCol;
- iBestStart = iStart;
- iBestLast = iLast;
- nBestScore = nScore;
+ if( rc==SQLITE_OK && sFinder.nFirst && nDocsize>nToken ){
+ for(jj=0; jj<(sFinder.nFirst-1); jj++){
+ if( sFinder.aFirst[jj+1]>io ) break;
+ }
+
+ if( sFinder.aFirst[jj]<io ){
+ memset(aSeen, 0, nPhrase);
+ rc = fts5SnippetScore(pApi, pFts, nDocsize, aSeen, i,
+ sFinder.aFirst[jj], nToken, &nScore, 0
+ );
+
+ nScore += (sFinder.aFirst[jj]==0 ? 120 : 100);
+ if( rc==SQLITE_OK && nScore>nBestScore ){
+ nBestScore = nScore;
+ iBestCol = i;
+ iBestStart = sFinder.aFirst[jj];
+ nColSize = nDocsize;
+ }
+ }
+ }
}
}
}
- if( rc==SQLITE_OK ){
- rc = pApi->xColumnSize(pFts, iBestCol, &nColSize);
- }
if( rc==SQLITE_OK ){
rc = pApi->xColumnText(pFts, iBestCol, &ctx.zIn, &ctx.nIn);
}
+ if( rc==SQLITE_OK && nColSize==0 ){
+ rc = pApi->xColumnSize(pFts, iBestCol, &nColSize);
+ }
if( ctx.zIn ){
if( rc==SQLITE_OK ){
rc = fts5CInstIterInit(pApi, pFts, iBestCol, &ctx.iter);
}
- if( (iBestStart+nToken-1)>iBestLast ){
- iBestStart -= (iBestStart+nToken-1-iBestLast) / 2;
- }
- if( iBestStart+nToken>nColSize ){
- iBestStart = nColSize - nToken;
- }
- if( iBestStart<0 ) iBestStart = 0;
-
ctx.iRangeStart = iBestStart;
ctx.iRangeEnd = iBestStart + nToken - 1;
if( iBestStart>0 ){
fts5HighlightAppend(&rc, &ctx, zEllips, -1);
}
+
+ /* Advance iterator ctx.iter so that it points to the first coalesced
+ ** phrase instance at or following position iBestStart. */
+ while( ctx.iter.iStart>=0 && ctx.iter.iStart<iBestStart && rc==SQLITE_OK ){
+ rc = fts5CInstIterNext(&ctx.iter);
+ }
+
if( rc==SQLITE_OK ){
rc = pApi->xTokenize(pFts, ctx.zIn, ctx.nIn, (void*)&ctx,fts5HighlightCb);
}
}else{
fts5HighlightAppend(&rc, &ctx, zEllips, -1);
}
-
- if( rc==SQLITE_OK ){
- sqlite3_result_text(pCtx, (const char*)ctx.zOut, -1, SQLITE_TRANSIENT);
- }else{
- sqlite3_result_error_code(pCtx, rc);
- }
- sqlite3_free(ctx.zOut);
}
+ if( rc==SQLITE_OK ){
+ sqlite3_result_text(pCtx, (const char*)ctx.zOut, -1, SQLITE_TRANSIENT);
+ }else{
+ sqlite3_result_error_code(pCtx, rc);
+ }
+ sqlite3_free(ctx.zOut);
sqlite3_free(aSeen);
+ sqlite3_free(sFinder.aFirst);
}
/************************************************************************/
void *pUserData /* Pointer to sqlite3_int64 variable */
){
sqlite3_int64 *pn = (sqlite3_int64*)pUserData;
+ UNUSED_PARAM2(pApi, pFts);
(*pn)++;
return SQLITE_OK;
}
int rc = SQLITE_OK; /* Return code */
int i; /* To iterate through builtin functions */
- for(i=0; rc==SQLITE_OK && i<sizeof(aBuiltin)/sizeof(aBuiltin[0]); i++){
+ for(i=0; rc==SQLITE_OK && i<ArraySize(aBuiltin); i++){
rc = pApi->xCreateFunction(pApi,
aBuiltin[i].zFunc,
aBuiltin[i].pUserData,
+/* #include "fts5Int.h" */
-static int sqlite3Fts5BufferGrow(int *pRc, Fts5Buffer *pBuf, int nByte){
-
- if( (pBuf->n + nByte) > pBuf->nSpace ){
+static int sqlite3Fts5BufferSize(int *pRc, Fts5Buffer *pBuf, u32 nByte){
+ if( (u32)pBuf->nSpace<nByte ){
+ u32 nNew = pBuf->nSpace ? pBuf->nSpace : 64;
u8 *pNew;
- int nNew = pBuf->nSpace ? pBuf->nSpace*2 : 64;
-
- /* A no-op if an error has already occurred */
- if( *pRc ) return 1;
-
- while( nNew<(pBuf->n + nByte) ){
+ while( nNew<nByte ){
nNew = nNew * 2;
}
pNew = sqlite3_realloc(pBuf->p, nNew);
return 0;
}
+
/*
** Encode value iVal as an SQLite varint and append it to the buffer object
** pBuf. If an OOM error occurs, set the error code in p.
*/
static void sqlite3Fts5BufferAppendVarint(int *pRc, Fts5Buffer *pBuf, i64 iVal){
- if( sqlite3Fts5BufferGrow(pRc, pBuf, 9) ) return;
+ if( fts5BufferGrow(pRc, pBuf, 9) ) return;
pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], iVal);
}
return (aBuf[0] << 24) + (aBuf[1] << 16) + (aBuf[2] << 8) + aBuf[3];
}
-static void sqlite3Fts5BufferAppend32(int *pRc, Fts5Buffer *pBuf, int iVal){
- if( sqlite3Fts5BufferGrow(pRc, pBuf, 4) ) return;
- sqlite3Fts5Put32(&pBuf->p[pBuf->n], iVal);
- pBuf->n += 4;
-}
-
/*
** Append buffer nData/pData to buffer pBuf. If an OOM error occurs, set
** the error code in p. If an error has already occurred when this function
static void sqlite3Fts5BufferAppendBlob(
int *pRc,
Fts5Buffer *pBuf,
- int nData,
+ u32 nData,
const u8 *pData
){
- assert( *pRc || nData>=0 );
- if( sqlite3Fts5BufferGrow(pRc, pBuf, nData) ) return;
- memcpy(&pBuf->p[pBuf->n], pData, nData);
- pBuf->n += nData;
+ assert_nc( *pRc || nData>=0 );
+ if( nData ){
+ if( fts5BufferGrow(pRc, pBuf, nData) ) return;
+ memcpy(&pBuf->p[pBuf->n], pData, nData);
+ pBuf->n += nData;
+ }
}
/*
Fts5Buffer *pBuf,
const char *zStr
){
- int nStr = strlen(zStr);
+ int nStr = (int)strlen(zStr);
sqlite3Fts5BufferAppendBlob(pRc, pBuf, nStr+1, (const u8*)zStr);
pBuf->n--;
}
return pIter->bEof;
}
-static int sqlite3Fts5PoslistWriterAppend(
+/*
+** Append position iPos to the position list being accumulated in buffer
+** pBuf, which must be already be large enough to hold the new data.
+** The previous position written to this list is *piPrev. *piPrev is set
+** to iPos before returning.
+*/
+static void sqlite3Fts5PoslistSafeAppend(
Fts5Buffer *pBuf,
- Fts5PoslistWriter *pWriter,
+ i64 *piPrev,
i64 iPos
){
static const i64 colmask = ((i64)(0x7FFFFFFF)) << 32;
- int rc = SQLITE_OK;
- if( 0==sqlite3Fts5BufferGrow(&rc, pBuf, 5+5+5) ){
- if( (iPos & colmask) != (pWriter->iPrev & colmask) ){
- pBuf->p[pBuf->n++] = 1;
- pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos>>32));
- pWriter->iPrev = (iPos & colmask);
- }
- pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos-pWriter->iPrev)+2);
- pWriter->iPrev = iPos;
+ if( (iPos & colmask) != (*piPrev & colmask) ){
+ pBuf->p[pBuf->n++] = 1;
+ pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos>>32));
+ *piPrev = (iPos & colmask);
}
- return rc;
+ pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], (iPos-*piPrev)+2);
+ *piPrev = iPos;
+}
+
+static int sqlite3Fts5PoslistWriterAppend(
+ Fts5Buffer *pBuf,
+ Fts5PoslistWriter *pWriter,
+ i64 iPos
+){
+ int rc = 0; /* Initialized only to suppress erroneous warning from Clang */
+ if( fts5BufferGrow(&rc, pBuf, 5+5+5) ) return rc;
+ sqlite3Fts5PoslistSafeAppend(pBuf, &pWriter->iPrev, iPos);
+ return SQLITE_OK;
}
static void *sqlite3Fts5MallocZero(int *pRc, int nByte){
void *pRet = 0;
if( *pRc==SQLITE_OK ){
pRet = sqlite3_malloc(nByte);
- if( pRet==0 && nByte>0 ){
- *pRc = SQLITE_NOMEM;
+ if( pRet==0 ){
+ if( nByte>0 ) *pRc = SQLITE_NOMEM;
}else{
memset(pRet, 0, nByte);
}
char *zRet = 0;
if( *pRc==SQLITE_OK ){
if( nIn<0 ){
- nIn = strlen(pIn);
+ nIn = (int)strlen(pIn);
}
zRet = (char*)sqlite3_malloc(nIn+1);
if( zRet ){
}
+/*************************************************************************
+*/
+typedef struct Fts5TermsetEntry Fts5TermsetEntry;
+struct Fts5TermsetEntry {
+ char *pTerm;
+ int nTerm;
+ int iIdx; /* Index (main or aPrefix[] entry) */
+ Fts5TermsetEntry *pNext;
+};
+
+struct Fts5Termset {
+ Fts5TermsetEntry *apHash[512];
+};
+
+static int sqlite3Fts5TermsetNew(Fts5Termset **pp){
+ int rc = SQLITE_OK;
+ *pp = sqlite3Fts5MallocZero(&rc, sizeof(Fts5Termset));
+ return rc;
+}
+
+static int sqlite3Fts5TermsetAdd(
+ Fts5Termset *p,
+ int iIdx,
+ const char *pTerm, int nTerm,
+ int *pbPresent
+){
+ int rc = SQLITE_OK;
+ *pbPresent = 0;
+ if( p ){
+ int i;
+ u32 hash = 13;
+ Fts5TermsetEntry *pEntry;
+
+ /* Calculate a hash value for this term. This is the same hash checksum
+ ** used by the fts5_hash.c module. This is not important for correct
+ ** operation of the module, but is necessary to ensure that some tests
+ ** designed to produce hash table collisions really do work. */
+ for(i=nTerm-1; i>=0; i--){
+ hash = (hash << 3) ^ hash ^ pTerm[i];
+ }
+ hash = (hash << 3) ^ hash ^ iIdx;
+ hash = hash % ArraySize(p->apHash);
+
+ for(pEntry=p->apHash[hash]; pEntry; pEntry=pEntry->pNext){
+ if( pEntry->iIdx==iIdx
+ && pEntry->nTerm==nTerm
+ && memcmp(pEntry->pTerm, pTerm, nTerm)==0
+ ){
+ *pbPresent = 1;
+ break;
+ }
+ }
+
+ if( pEntry==0 ){
+ pEntry = sqlite3Fts5MallocZero(&rc, sizeof(Fts5TermsetEntry) + nTerm);
+ if( pEntry ){
+ pEntry->pTerm = (char*)&pEntry[1];
+ pEntry->nTerm = nTerm;
+ pEntry->iIdx = iIdx;
+ memcpy(pEntry->pTerm, pTerm, nTerm);
+ pEntry->pNext = p->apHash[hash];
+ p->apHash[hash] = pEntry;
+ }
+ }
+ }
+
+ return rc;
+}
+
+static void sqlite3Fts5TermsetFree(Fts5Termset *p){
+ if( p ){
+ u32 i;
+ for(i=0; i<ArraySize(p->apHash); i++){
+ Fts5TermsetEntry *pEntry = p->apHash[i];
+ while( pEntry ){
+ Fts5TermsetEntry *pDel = pEntry;
+ pEntry = pEntry->pNext;
+ sqlite3_free(pDel);
+ }
+ }
+ sqlite3_free(p);
+ }
+}
/*
** 2014 Jun 09
*/
-
+/* #include "fts5Int.h" */
#define FTS5_DEFAULT_PAGE_SIZE 4050
#define FTS5_DEFAULT_AUTOMERGE 4
+#define FTS5_DEFAULT_USERMERGE 4
#define FTS5_DEFAULT_CRISISMERGE 16
+#define FTS5_DEFAULT_HASHSIZE (1024*1024)
/* Maximum allowed page size */
#define FTS5_MAX_PAGE_SIZE (128*1024)
}
}
+
+struct Fts5Enum {
+ const char *zName;
+ int eVal;
+};
+typedef struct Fts5Enum Fts5Enum;
+
+static int fts5ConfigSetEnum(
+ const Fts5Enum *aEnum,
+ const char *zEnum,
+ int *peVal
+){
+ int nEnum = (int)strlen(zEnum);
+ int i;
+ int iVal = -1;
+
+ for(i=0; aEnum[i].zName; i++){
+ if( sqlite3_strnicmp(aEnum[i].zName, zEnum, nEnum)==0 ){
+ if( iVal>=0 ) return SQLITE_ERROR;
+ iVal = aEnum[i].eVal;
+ }
+ }
+
+ *peVal = iVal;
+ return iVal<0 ? SQLITE_ERROR : SQLITE_OK;
+}
+
/*
** Parse a "special" CREATE VIRTUAL TABLE directive and update
** configuration object pConfig as appropriate.
char **pzErr /* OUT: Error message */
){
int rc = SQLITE_OK;
- int nCmd = strlen(zCmd);
+ int nCmd = (int)strlen(zCmd);
if( sqlite3_strnicmp("prefix", zCmd, nCmd)==0 ){
const int nByte = sizeof(int) * FTS5_MAX_PREFIX_INDEXES;
const char *p;
- if( pConfig->aPrefix ){
- *pzErr = sqlite3_mprintf("multiple prefix=... directives");
- rc = SQLITE_ERROR;
- }else{
+ int bFirst = 1;
+ if( pConfig->aPrefix==0 ){
pConfig->aPrefix = sqlite3Fts5MallocZero(&rc, nByte);
+ if( rc ) return rc;
}
+
p = zArg;
- while( rc==SQLITE_OK && p[0] ){
+ while( 1 ){
int nPre = 0;
+
while( p[0]==' ' ) p++;
- while( p[0]>='0' && p[0]<='9' && nPre<1000 ){
- nPre = nPre*10 + (p[0] - '0');
+ if( bFirst==0 && p[0]==',' ){
p++;
+ while( p[0]==' ' ) p++;
+ }else if( p[0]=='\0' ){
+ break;
}
- while( p[0]==' ' ) p++;
- if( p[0]==',' ){
- p++;
- }else if( p[0] ){
+ if( p[0]<'0' || p[0]>'9' ){
*pzErr = sqlite3_mprintf("malformed prefix=... directive");
rc = SQLITE_ERROR;
+ break;
}
- if( rc==SQLITE_OK && (nPre==0 || nPre>=1000) ){
- *pzErr = sqlite3_mprintf("prefix length out of range: %d", nPre);
+
+ if( pConfig->nPrefix==FTS5_MAX_PREFIX_INDEXES ){
+ *pzErr = sqlite3_mprintf(
+ "too many prefix indexes (max %d)", FTS5_MAX_PREFIX_INDEXES
+ );
rc = SQLITE_ERROR;
+ break;
}
+
+ while( p[0]>='0' && p[0]<='9' && nPre<1000 ){
+ nPre = nPre*10 + (p[0] - '0');
+ p++;
+ }
+
+ if( nPre<=0 || nPre>=1000 ){
+ *pzErr = sqlite3_mprintf("prefix length out of range (max 999)");
+ rc = SQLITE_ERROR;
+ break;
+ }
+
pConfig->aPrefix[pConfig->nPrefix] = nPre;
pConfig->nPrefix++;
+ bFirst = 0;
}
+ assert( pConfig->nPrefix<=FTS5_MAX_PREFIX_INDEXES );
return rc;
}
if( sqlite3_strnicmp("tokenize", zCmd, nCmd)==0 ){
const char *p = (const char*)zArg;
- int nArg = strlen(zArg) + 1;
+ int nArg = (int)strlen(zArg) + 1;
char **azArg = sqlite3Fts5MallocZero(&rc, sizeof(char*) * nArg);
char *pDel = sqlite3Fts5MallocZero(&rc, nArg * 2);
char *pSpace = pDel;
return rc;
}
+ if( sqlite3_strnicmp("detail", zCmd, nCmd)==0 ){
+ const Fts5Enum aDetail[] = {
+ { "none", FTS5_DETAIL_NONE },
+ { "full", FTS5_DETAIL_FULL },
+ { "columns", FTS5_DETAIL_COLUMNS },
+ { 0, 0 }
+ };
+
+ if( (rc = fts5ConfigSetEnum(aDetail, zArg, &pConfig->eDetail)) ){
+ *pzErr = sqlite3_mprintf("malformed detail=... directive");
+ }
+ return rc;
+ }
+
*pzErr = sqlite3_mprintf("unrecognized option: \"%.*s\"", nCmd, zCmd);
return SQLITE_ERROR;
}
){
const char *zRet = 0;
- int nIn = strlen(zIn);
+ int nIn = (int)strlen(zIn);
char *zOut = sqlite3_malloc(nIn+1);
assert( *pRc==SQLITE_OK );
*pbQuoted = 1;
}else{
zRet = fts5ConfigSkipBareword(zIn);
- zOut[zRet-zIn] = '\0';
+ if( zRet ){
+ zOut[zRet-zIn] = '\0';
+ }
}
}
pRet->zDb = sqlite3Fts5Strndup(&rc, azArg[1], -1);
pRet->zName = sqlite3Fts5Strndup(&rc, azArg[2], -1);
pRet->bColumnsize = 1;
+ pRet->eDetail = FTS5_DETAIL_FULL;
#ifdef SQLITE_DEBUG
pRet->bPrefixIndex = 1;
#endif
*pzRank = 0;
*pzRankArgs = 0;
- p = fts5ConfigSkipWhitespace(p);
- pRank = p;
- p = fts5ConfigSkipBareword(p);
-
- if( p ){
- zRank = sqlite3Fts5MallocZero(&rc, 1 + p - pRank);
- if( zRank ) memcpy(zRank, pRank, p-pRank);
- }else{
+ if( p==0 ){
rc = SQLITE_ERROR;
- }
-
- if( rc==SQLITE_OK ){
- p = fts5ConfigSkipWhitespace(p);
- if( *p!='(' ) rc = SQLITE_ERROR;
- p++;
- }
- if( rc==SQLITE_OK ){
- const char *pArgs;
+ }else{
p = fts5ConfigSkipWhitespace(p);
- pArgs = p;
- if( *p!=')' ){
- p = fts5ConfigSkipArgs(p);
- if( p==0 ){
- rc = SQLITE_ERROR;
- }else{
- zRankArgs = sqlite3Fts5MallocZero(&rc, 1 + p - pArgs);
- if( zRankArgs ) memcpy(zRankArgs, pArgs, p-pArgs);
+ pRank = p;
+ p = fts5ConfigSkipBareword(p);
+
+ if( p ){
+ zRank = sqlite3Fts5MallocZero(&rc, 1 + p - pRank);
+ if( zRank ) memcpy(zRank, pRank, p-pRank);
+ }else{
+ rc = SQLITE_ERROR;
+ }
+
+ if( rc==SQLITE_OK ){
+ p = fts5ConfigSkipWhitespace(p);
+ if( *p!='(' ) rc = SQLITE_ERROR;
+ p++;
+ }
+ if( rc==SQLITE_OK ){
+ const char *pArgs;
+ p = fts5ConfigSkipWhitespace(p);
+ pArgs = p;
+ if( *p!=')' ){
+ p = fts5ConfigSkipArgs(p);
+ if( p==0 ){
+ rc = SQLITE_ERROR;
+ }else{
+ zRankArgs = sqlite3Fts5MallocZero(&rc, 1 + p - pArgs);
+ if( zRankArgs ) memcpy(zRankArgs, pArgs, p-pArgs);
+ }
}
}
}
}
}
+ else if( 0==sqlite3_stricmp(zKey, "hashsize") ){
+ int nHashSize = -1;
+ if( SQLITE_INTEGER==sqlite3_value_numeric_type(pVal) ){
+ nHashSize = sqlite3_value_int(pVal);
+ }
+ if( nHashSize<=0 ){
+ *pbBadkey = 1;
+ }else{
+ pConfig->nHashSize = nHashSize;
+ }
+ }
+
else if( 0==sqlite3_stricmp(zKey, "automerge") ){
int nAutomerge = -1;
if( SQLITE_INTEGER==sqlite3_value_numeric_type(pVal) ){
}
}
+ else if( 0==sqlite3_stricmp(zKey, "usermerge") ){
+ int nUsermerge = -1;
+ if( SQLITE_INTEGER==sqlite3_value_numeric_type(pVal) ){
+ nUsermerge = sqlite3_value_int(pVal);
+ }
+ if( nUsermerge<2 || nUsermerge>16 ){
+ *pbBadkey = 1;
+ }else{
+ pConfig->nUsermerge = nUsermerge;
+ }
+ }
+
else if( 0==sqlite3_stricmp(zKey, "crisismerge") ){
int nCrisisMerge = -1;
if( SQLITE_INTEGER==sqlite3_value_numeric_type(pVal) ){
/* Set default values */
pConfig->pgsz = FTS5_DEFAULT_PAGE_SIZE;
pConfig->nAutomerge = FTS5_DEFAULT_AUTOMERGE;
+ pConfig->nUsermerge = FTS5_DEFAULT_USERMERGE;
pConfig->nCrisisMerge = FTS5_DEFAULT_CRISISMERGE;
+ pConfig->nHashSize = FTS5_DEFAULT_HASHSIZE;
zSql = sqlite3Fts5Mprintf(&rc, zSelect, pConfig->zDb, pConfig->zName);
if( zSql ){
return rc;
}
-
/*
** 2014 May 31
**
+/* #include "fts5Int.h" */
+/* #include "fts5parse.h" */
/*
** All token types in the generated fts5parse.h file are greater than 0.
struct Fts5Expr {
Fts5Index *pIndex;
+ Fts5Config *pConfig;
Fts5ExprNode *pRoot;
int bDesc; /* Iterate in descending rowid order */
int nPhrase; /* Number of phrases in expression */
int bEof; /* True at EOF */
int bNomatch; /* True if entry is not a match */
+ /* Next method for this node. */
+ int (*xNext)(Fts5Expr*, Fts5ExprNode*, int, i64);
+
i64 iRowid; /* Current rowid */
Fts5ExprNearset *pNear; /* For FTS5_STRING - cluster of phrases */
#define Fts5NodeIsString(p) ((p)->eType==FTS5_TERM || (p)->eType==FTS5_STRING)
+/*
+** Invoke the xNext method of an Fts5ExprNode object. This macro should be
+** used as if it has the same signature as the xNext() methods themselves.
+*/
+#define fts5ExprNodeNext(a,b,c,d) (b)->xNext((a), (b), (c), (d))
+
/*
** An instance of the following structure represents a single search term
** or term prefix.
*/
struct Fts5ExprTerm {
- int bPrefix; /* True for a prefix term */
+ u8 bPrefix; /* True for a prefix term */
+ u8 bFirst; /* True if token must be first in column */
char *zTerm; /* nul-terminated term */
Fts5IndexIter *pIter; /* Iterator for this term */
Fts5ExprTerm *pSynonym; /* Pointer to first in list of synonyms */
case ',': tok = FTS5_COMMA; break;
case '+': tok = FTS5_PLUS; break;
case '*': tok = FTS5_STAR; break;
+ case '-': tok = FTS5_MINUS; break;
+ case '^': tok = FTS5_CARET; break;
case '\0': tok = FTS5_EOF; break;
case '"': {
static int sqlite3Fts5ExprNew(
Fts5Config *pConfig, /* FTS5 Configuration */
+ int iCol,
const char *zExpr, /* Expression text */
Fts5Expr **ppNew,
char **pzErr
}while( sParse.rc==SQLITE_OK && t!=FTS5_EOF );
sqlite3Fts5ParserFree(pEngine, fts5ParseFree);
+ /* If the LHS of the MATCH expression was a user column, apply the
+ ** implicit column-filter. */
+ if( iCol<pConfig->nCol && sParse.pExpr && sParse.rc==SQLITE_OK ){
+ int n = sizeof(Fts5Colset);
+ Fts5Colset *pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&sParse.rc, n);
+ if( pColset ){
+ pColset->nCol = 1;
+ pColset->aiCol[0] = iCol;
+ sqlite3Fts5ParseSetColset(&sParse, sParse.pExpr, pColset);
+ }
+ }
+
assert( sParse.rc!=SQLITE_OK || sParse.zErr==0 );
if( sParse.rc==SQLITE_OK ){
*ppNew = pNew = sqlite3_malloc(sizeof(Fts5Expr));
sParse.rc = SQLITE_NOMEM;
sqlite3Fts5ParseNodeFree(sParse.pExpr);
}else{
- pNew->pRoot = sParse.pExpr;
+ if( !sParse.pExpr ){
+ const int nByte = sizeof(Fts5ExprNode);
+ pNew->pRoot = (Fts5ExprNode*)sqlite3Fts5MallocZero(&sParse.rc, nByte);
+ if( pNew->pRoot ){
+ pNew->pRoot->bEof = 1;
+ }
+ }else{
+ pNew->pRoot = sParse.pExpr;
+ }
pNew->pIndex = 0;
+ pNew->pConfig = pConfig;
pNew->apExprPhrase = sParse.apPhrase;
pNew->nPhrase = sParse.nPhrase;
sParse.apPhrase = 0;
}
+ }else{
+ sqlite3Fts5ParseNodeFree(sParse.pExpr);
}
sqlite3_free(sParse.apPhrase);
assert( bDesc==0 || bDesc==1 );
for(p=pTerm; p; p=p->pSynonym){
if( 0==sqlite3Fts5IterEof(p->pIter) ){
- i64 iRowid = sqlite3Fts5IterRowid(p->pIter);
+ i64 iRowid = p->pIter->iRowid;
if( bRetValid==0 || (bDesc!=(iRowid<iRet)) ){
iRet = iRowid;
bRetValid = 1;
/*
** Argument pTerm must be a synonym iterator.
*/
-static int fts5ExprSynonymPoslist(
+static int fts5ExprSynonymList(
Fts5ExprTerm *pTerm,
- Fts5Colset *pColset,
i64 iRowid,
- int *pbDel, /* OUT: Caller should sqlite3_free(*pa) */
+ Fts5Buffer *pBuf, /* Use this buffer for space if required */
u8 **pa, int *pn
){
Fts5PoslistReader aStatic[4];
assert( pTerm->pSynonym );
for(p=pTerm; p; p=p->pSynonym){
Fts5IndexIter *pIter = p->pIter;
- if( sqlite3Fts5IterEof(pIter)==0 && sqlite3Fts5IterRowid(pIter)==iRowid ){
- const u8 *a;
- int n;
- i64 dummy;
- rc = sqlite3Fts5IterPoslist(pIter, pColset, &a, &n, &dummy);
- if( rc!=SQLITE_OK ) goto synonym_poslist_out;
+ if( sqlite3Fts5IterEof(pIter)==0 && pIter->iRowid==iRowid ){
+ if( pIter->nData==0 ) continue;
if( nIter==nAlloc ){
int nByte = sizeof(Fts5PoslistReader) * nAlloc * 2;
Fts5PoslistReader *aNew = (Fts5PoslistReader*)sqlite3_malloc(nByte);
if( aIter!=aStatic ) sqlite3_free(aIter);
aIter = aNew;
}
- sqlite3Fts5PoslistReaderInit(a, n, &aIter[nIter]);
+ sqlite3Fts5PoslistReaderInit(pIter->pData, pIter->nData, &aIter[nIter]);
assert( aIter[nIter].bEof==0 );
nIter++;
}
}
- assert( *pbDel==0 );
if( nIter==1 ){
*pa = (u8*)aIter[0].a;
*pn = aIter[0].n;
}else{
Fts5PoslistWriter writer = {0};
- Fts5Buffer buf = {0,0,0};
i64 iPrev = -1;
+ fts5BufferZero(pBuf);
while( 1 ){
int i;
i64 iMin = FTS5_LARGEST_INT64;
}
}
if( iMin==FTS5_LARGEST_INT64 || rc!=SQLITE_OK ) break;
- rc = sqlite3Fts5PoslistWriterAppend(&buf, &writer, iMin);
+ rc = sqlite3Fts5PoslistWriterAppend(pBuf, &writer, iMin);
iPrev = iMin;
}
- if( rc ){
- sqlite3_free(buf.p);
- }else{
- *pa = buf.p;
- *pn = buf.n;
- *pbDel = 1;
+ if( rc==SQLITE_OK ){
+ *pa = pBuf->p;
+ *pn = pBuf->n;
}
}
*/
static int fts5ExprPhraseIsMatch(
Fts5ExprNode *pNode, /* Node pPhrase belongs to */
- Fts5Colset *pColset, /* Restrict matches to these columns */
Fts5ExprPhrase *pPhrase, /* Phrase object to initialize */
int *pbMatch /* OUT: Set to true if really a match */
){
Fts5PoslistReader *aIter = aStatic;
int i;
int rc = SQLITE_OK;
+ int bFirst = pPhrase->aTerm[0].bFirst;
fts5BufferZero(&pPhrase->poslist);
/* If the aStatic[] array is not large enough, allocate a large array
** using sqlite3_malloc(). This approach could be improved upon. */
- if( pPhrase->nTerm>(sizeof(aStatic) / sizeof(aStatic[0])) ){
+ if( pPhrase->nTerm>ArraySize(aStatic) ){
int nByte = sizeof(Fts5PoslistReader) * pPhrase->nTerm;
aIter = (Fts5PoslistReader*)sqlite3_malloc(nByte);
if( !aIter ) return SQLITE_NOMEM;
/* Initialize a term iterator for each term in the phrase */
for(i=0; i<pPhrase->nTerm; i++){
Fts5ExprTerm *pTerm = &pPhrase->aTerm[i];
- i64 dummy;
int n = 0;
int bFlag = 0;
- const u8 *a = 0;
+ u8 *a = 0;
if( pTerm->pSynonym ){
- rc = fts5ExprSynonymPoslist(
- pTerm, pColset, pNode->iRowid, &bFlag, (u8**)&a, &n
- );
+ Fts5Buffer buf = {0, 0, 0};
+ rc = fts5ExprSynonymList(pTerm, pNode->iRowid, &buf, &a, &n);
+ if( rc ){
+ sqlite3_free(a);
+ goto ismatch_out;
+ }
+ if( a==buf.p ) bFlag = 1;
}else{
- rc = sqlite3Fts5IterPoslist(pTerm->pIter, pColset, &a, &n, &dummy);
+ a = (u8*)pTerm->pIter->pData;
+ n = pTerm->pIter->nData;
}
- if( rc!=SQLITE_OK ) goto ismatch_out;
sqlite3Fts5PoslistReaderInit(a, n, &aIter[i]);
- aIter[i].bFlag = bFlag;
+ aIter[i].bFlag = (u8)bFlag;
if( aIter[i].bEof ) goto ismatch_out;
}
}while( bMatch==0 );
/* Append position iPos to the output */
- rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos);
- if( rc!=SQLITE_OK ) goto ismatch_out;
+ if( bFirst==0 || FTS5_POS2OFFSET(iPos)==0 ){
+ rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos);
+ if( rc!=SQLITE_OK ) goto ismatch_out;
+ }
for(i=0; i<pPhrase->nTerm; i++){
if( sqlite3Fts5PoslistReaderNext(&aIter[i]) ) goto ismatch_out;
return fts5LookaheadReaderNext(p);
}
-#if 0
-static int fts5LookaheadReaderEof(Fts5LookaheadReader *p){
- return (p->iPos==FTS5_LOOKAHEAD_EOF);
-}
-#endif
-
typedef struct Fts5NearTrimmer Fts5NearTrimmer;
struct Fts5NearTrimmer {
Fts5LookaheadReader reader; /* Input iterator */
/* If the aStatic[] array is not large enough, allocate a large array
** using sqlite3_malloc(). This approach could be improved upon. */
- if( pNear->nPhrase>(sizeof(aStatic) / sizeof(aStatic[0])) ){
+ if( pNear->nPhrase>ArraySize(aStatic) ){
int nByte = sizeof(Fts5NearTrimmer) * pNear->nPhrase;
a = (Fts5NearTrimmer*)sqlite3Fts5MallocZero(&rc, nByte);
}else{
}
}
-/*
-** Advance the first term iterator in the first phrase of pNear. Set output
-** variable *pbEof to true if it reaches EOF or if an error occurs.
-**
-** Return SQLITE_OK if successful, or an SQLite error code if an error
-** occurs.
-*/
-static int fts5ExprNearAdvanceFirst(
- Fts5Expr *pExpr, /* Expression pPhrase belongs to */
- Fts5ExprNode *pNode, /* FTS5_STRING or FTS5_TERM node */
- int bFromValid,
- i64 iFrom
-){
- Fts5ExprTerm *pTerm = &pNode->pNear->apPhrase[0]->aTerm[0];
- int rc = SQLITE_OK;
-
- if( pTerm->pSynonym ){
- int bEof = 1;
- Fts5ExprTerm *p;
-
- /* Find the firstest rowid any synonym points to. */
- i64 iRowid = fts5ExprSynonymRowid(pTerm, pExpr->bDesc, 0);
-
- /* Advance each iterator that currently points to iRowid. Or, if iFrom
- ** is valid - each iterator that points to a rowid before iFrom. */
- for(p=pTerm; p; p=p->pSynonym){
- if( sqlite3Fts5IterEof(p->pIter)==0 ){
- i64 ii = sqlite3Fts5IterRowid(p->pIter);
- if( ii==iRowid
- || (bFromValid && ii!=iFrom && (ii>iFrom)==pExpr->bDesc)
- ){
- if( bFromValid ){
- rc = sqlite3Fts5IterNextFrom(p->pIter, iFrom);
- }else{
- rc = sqlite3Fts5IterNext(p->pIter);
- }
- if( rc!=SQLITE_OK ) break;
- if( sqlite3Fts5IterEof(p->pIter)==0 ){
- bEof = 0;
- }
- }else{
- bEof = 0;
- }
- }
- }
-
- /* Set the EOF flag if either all synonym iterators are at EOF or an
- ** error has occurred. */
- pNode->bEof = (rc || bEof);
- }else{
- Fts5IndexIter *pIter = pTerm->pIter;
-
- assert( Fts5NodeIsString(pNode) );
- if( bFromValid ){
- rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
- }else{
- rc = sqlite3Fts5IterNext(pIter);
- }
-
- pNode->bEof = (rc || sqlite3Fts5IterEof(pIter));
- }
-
- return rc;
-}
-
/*
** Advance iterator pIter until it points to a value equal to or laster
** than the initial value of *piLast. If this means the iterator points
i64 iLast = *piLast;
i64 iRowid;
- iRowid = sqlite3Fts5IterRowid(pIter);
+ iRowid = pIter->iRowid;
if( (bDesc==0 && iLast>iRowid) || (bDesc && iLast<iRowid) ){
int rc = sqlite3Fts5IterNextFrom(pIter, iLast);
if( rc || sqlite3Fts5IterEof(pIter) ){
*pbEof = 1;
return 1;
}
- iRowid = sqlite3Fts5IterRowid(pIter);
+ iRowid = pIter->iRowid;
assert( (bDesc==0 && iRowid>=iLast) || (bDesc==1 && iRowid<=iLast) );
}
*piLast = iRowid;
for(p=pTerm; rc==SQLITE_OK && p; p=p->pSynonym){
if( sqlite3Fts5IterEof(p->pIter)==0 ){
- i64 iRowid = sqlite3Fts5IterRowid(p->pIter);
+ i64 iRowid = p->pIter->iRowid;
if( (bDesc==0 && iLast>iRowid) || (bDesc && iLast<iRowid) ){
rc = sqlite3Fts5IterNextFrom(p->pIter, iLast);
}
){
Fts5ExprNearset *pNear = pNode->pNear;
int rc = *pRc;
+
+ if( pExpr->pConfig->eDetail!=FTS5_DETAIL_FULL ){
+ Fts5ExprTerm *pTerm;
+ Fts5ExprPhrase *pPhrase = pNear->apPhrase[0];
+ pPhrase->poslist.n = 0;
+ for(pTerm=&pPhrase->aTerm[0]; pTerm; pTerm=pTerm->pSynonym){
+ Fts5IndexIter *pIter = pTerm->pIter;
+ if( sqlite3Fts5IterEof(pIter)==0 ){
+ if( pIter->iRowid==pNode->iRowid && pIter->nData>0 ){
+ pPhrase->poslist.n = 1;
+ }
+ }
+ }
+ return pPhrase->poslist.n;
+ }else{
+ int i;
+
+ /* Check that each phrase in the nearset matches the current row.
+ ** Populate the pPhrase->poslist buffers at the same time. If any
+ ** phrase is not a match, break out of the loop early. */
+ for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
+ Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
+ if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym
+ || pNear->pColset || pPhrase->aTerm[0].bFirst
+ ){
+ int bMatch = 0;
+ rc = fts5ExprPhraseIsMatch(pNode, pPhrase, &bMatch);
+ if( bMatch==0 ) break;
+ }else{
+ Fts5IndexIter *pIter = pPhrase->aTerm[0].pIter;
+ fts5BufferSet(&rc, &pPhrase->poslist, pIter->nData, pIter->pData);
+ }
+ }
+
+ *pRc = rc;
+ if( i==pNear->nPhrase && (i==1 || fts5ExprNearIsMatch(pRc, pNear)) ){
+ return 1;
+ }
+ return 0;
+ }
+}
+
+
+/*
+** Initialize all term iterators in the pNear object. If any term is found
+** to match no documents at all, return immediately without initializing any
+** further iterators.
+**
+** If an error occurs, return an SQLite error code. Otherwise, return
+** SQLITE_OK. It is not considered an error if some term matches zero
+** documents.
+*/
+static int fts5ExprNearInitAll(
+ Fts5Expr *pExpr,
+ Fts5ExprNode *pNode
+){
+ Fts5ExprNearset *pNear = pNode->pNear;
int i;
- /* Check that each phrase in the nearset matches the current row.
- ** Populate the pPhrase->poslist buffers at the same time. If any
- ** phrase is not a match, break out of the loop early. */
- for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
+ assert( pNode->bNomatch==0 );
+ for(i=0; i<pNear->nPhrase; i++){
Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
- if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym || pNear->pColset ){
- int bMatch = 0;
- rc = fts5ExprPhraseIsMatch(pNode, pNear->pColset, pPhrase, &bMatch);
- if( bMatch==0 ) break;
+ if( pPhrase->nTerm==0 ){
+ pNode->bEof = 1;
+ return SQLITE_OK;
}else{
- rc = sqlite3Fts5IterPoslistBuffer(
- pPhrase->aTerm[0].pIter, &pPhrase->poslist
- );
+ int j;
+ for(j=0; j<pPhrase->nTerm; j++){
+ Fts5ExprTerm *pTerm = &pPhrase->aTerm[j];
+ Fts5ExprTerm *p;
+ int bHit = 0;
+
+ for(p=pTerm; p; p=p->pSynonym){
+ int rc;
+ if( p->pIter ){
+ sqlite3Fts5IterClose(p->pIter);
+ p->pIter = 0;
+ }
+ rc = sqlite3Fts5IndexQuery(
+ pExpr->pIndex, p->zTerm, (int)strlen(p->zTerm),
+ (pTerm->bPrefix ? FTS5INDEX_QUERY_PREFIX : 0) |
+ (pExpr->bDesc ? FTS5INDEX_QUERY_DESC : 0),
+ pNear->pColset,
+ &p->pIter
+ );
+ assert( (rc==SQLITE_OK)==(p->pIter!=0) );
+ if( rc!=SQLITE_OK ) return rc;
+ if( 0==sqlite3Fts5IterEof(p->pIter) ){
+ bHit = 1;
+ }
+ }
+
+ if( bHit==0 ){
+ pNode->bEof = 1;
+ return SQLITE_OK;
+ }
+ }
}
}
- *pRc = rc;
- if( i==pNear->nPhrase && (i==1 || fts5ExprNearIsMatch(pRc, pNear)) ){
- return 1;
+ pNode->bEof = 0;
+ return SQLITE_OK;
+}
+
+/*
+** If pExpr is an ASC iterator, this function returns a value with the
+** same sign as:
+**
+** (iLhs - iRhs)
+**
+** Otherwise, if this is a DESC iterator, the opposite is returned:
+**
+** (iRhs - iLhs)
+*/
+static int fts5RowidCmp(
+ Fts5Expr *pExpr,
+ i64 iLhs,
+ i64 iRhs
+){
+ assert( pExpr->bDesc==0 || pExpr->bDesc==1 );
+ if( pExpr->bDesc==0 ){
+ if( iLhs<iRhs ) return -1;
+ return (iLhs > iRhs);
+ }else{
+ if( iLhs>iRhs ) return -1;
+ return (iLhs < iRhs);
}
+}
- return 0;
+static void fts5ExprSetEof(Fts5ExprNode *pNode){
+ int i;
+ pNode->bEof = 1;
+ pNode->bNomatch = 0;
+ for(i=0; i<pNode->nChild; i++){
+ fts5ExprSetEof(pNode->apChild[i]);
+ }
}
-static int fts5ExprTokenTest(
- Fts5Expr *pExpr, /* Expression that pNear is a part of */
- Fts5ExprNode *pNode /* The "NEAR" node (FTS5_TERM) */
-){
- /* As this "NEAR" object is actually a single phrase that consists
- ** of a single term only, grab pointers into the poslist managed by the
- ** fts5_index.c iterator object. This is much faster than synthesizing
- ** a new poslist the way we have to for more complicated phrase or NEAR
- ** expressions. */
- Fts5ExprNearset *pNear = pNode->pNear;
- Fts5ExprPhrase *pPhrase = pNear->apPhrase[0];
- Fts5IndexIter *pIter = pPhrase->aTerm[0].pIter;
- Fts5Colset *pColset = pNear->pColset;
- int rc;
+static void fts5ExprNodeZeroPoslist(Fts5ExprNode *pNode){
+ if( pNode->eType==FTS5_STRING || pNode->eType==FTS5_TERM ){
+ Fts5ExprNearset *pNear = pNode->pNear;
+ int i;
+ for(i=0; i<pNear->nPhrase; i++){
+ Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
+ pPhrase->poslist.n = 0;
+ }
+ }else{
+ int i;
+ for(i=0; i<pNode->nChild; i++){
+ fts5ExprNodeZeroPoslist(pNode->apChild[i]);
+ }
+ }
+}
- assert( pNode->eType==FTS5_TERM );
- assert( pNear->nPhrase==1 && pPhrase->nTerm==1 );
- assert( pPhrase->aTerm[0].pSynonym==0 );
- rc = sqlite3Fts5IterPoslist(pIter, pColset,
- (const u8**)&pPhrase->poslist.p, &pPhrase->poslist.n, &pNode->iRowid
- );
- pNode->bNomatch = (pPhrase->poslist.n==0);
- return rc;
+
+/*
+** Compare the values currently indicated by the two nodes as follows:
+**
+** res = (*p1) - (*p2)
+**
+** Nodes that point to values that come later in the iteration order are
+** considered to be larger. Nodes at EOF are the largest of all.
+**
+** This means that if the iteration order is ASC, then numerically larger
+** rowids are considered larger. Or if it is the default DESC, numerically
+** smaller rowids are larger.
+*/
+static int fts5NodeCompare(
+ Fts5Expr *pExpr,
+ Fts5ExprNode *p1,
+ Fts5ExprNode *p2
+){
+ if( p2->bEof ) return -1;
+ if( p1->bEof ) return +1;
+ return fts5RowidCmp(pExpr, p1->iRowid, p2->iRowid);
}
/*
** otherwise. It is not considered an error code if an iterator reaches
** EOF.
*/
-static int fts5ExprNearNextMatch(
+static int fts5ExprNodeTest_STRING(
Fts5Expr *pExpr, /* Expression pPhrase belongs to */
Fts5ExprNode *pNode
){
assert( pNear->nPhrase>1
|| pNear->apPhrase[0]->nTerm>1
|| pNear->apPhrase[0]->aTerm[0].pSynonym
+ || pNear->apPhrase[0]->aTerm[0].bFirst
);
/* Initialize iLast, the "lastest" rowid any iterator points to. If the
if( pLeft->aTerm[0].pSynonym ){
iLast = fts5ExprSynonymRowid(&pLeft->aTerm[0], bDesc, 0);
}else{
- iLast = sqlite3Fts5IterRowid(pLeft->aTerm[0].pIter);
+ iLast = pLeft->aTerm[0].pIter->iRowid;
}
do {
if( iRowid==iLast ) continue;
bMatch = 0;
if( fts5ExprSynonymAdvanceto(pTerm, bDesc, &iLast, &rc) ){
+ pNode->bNomatch = 0;
pNode->bEof = 1;
return rc;
}
}else{
Fts5IndexIter *pIter = pPhrase->aTerm[j].pIter;
- i64 iRowid = sqlite3Fts5IterRowid(pIter);
- if( iRowid==iLast ) continue;
+ if( pIter->iRowid==iLast || pIter->bEof ) continue;
bMatch = 0;
if( fts5ExprAdvanceto(pIter, bDesc, &iLast, &rc, &pNode->bEof) ){
return rc;
}while( bMatch==0 );
pNode->iRowid = iLast;
- pNode->bNomatch = (0==fts5ExprNearTest(&rc, pExpr, pNode));
+ pNode->bNomatch = ((0==fts5ExprNearTest(&rc, pExpr, pNode)) && rc==SQLITE_OK);
+ assert( pNode->bEof==0 || pNode->bNomatch==0 );
return rc;
}
/*
-** Initialize all term iterators in the pNear object. If any term is found
-** to match no documents at all, return immediately without initializing any
-** further iterators.
+** Advance the first term iterator in the first phrase of pNear. Set output
+** variable *pbEof to true if it reaches EOF or if an error occurs.
+**
+** Return SQLITE_OK if successful, or an SQLite error code if an error
+** occurs.
*/
-static int fts5ExprNearInitAll(
- Fts5Expr *pExpr,
- Fts5ExprNode *pNode
+static int fts5ExprNodeNext_STRING(
+ Fts5Expr *pExpr, /* Expression pPhrase belongs to */
+ Fts5ExprNode *pNode, /* FTS5_STRING or FTS5_TERM node */
+ int bFromValid,
+ i64 iFrom
){
- Fts5ExprNearset *pNear = pNode->pNear;
- int i, j;
+ Fts5ExprTerm *pTerm = &pNode->pNear->apPhrase[0]->aTerm[0];
int rc = SQLITE_OK;
- for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){
- Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
- for(j=0; j<pPhrase->nTerm; j++){
- Fts5ExprTerm *pTerm = &pPhrase->aTerm[j];
- Fts5ExprTerm *p;
- int bEof = 1;
-
- for(p=pTerm; p && rc==SQLITE_OK; p=p->pSynonym){
- if( p->pIter ){
- sqlite3Fts5IterClose(p->pIter);
- p->pIter = 0;
- }
- rc = sqlite3Fts5IndexQuery(
- pExpr->pIndex, p->zTerm, strlen(p->zTerm),
- (pTerm->bPrefix ? FTS5INDEX_QUERY_PREFIX : 0) |
- (pExpr->bDesc ? FTS5INDEX_QUERY_DESC : 0),
- pNear->pColset,
- &p->pIter
- );
- assert( rc==SQLITE_OK || p->pIter==0 );
- if( p->pIter && 0==sqlite3Fts5IterEof(p->pIter) ){
+ pNode->bNomatch = 0;
+ if( pTerm->pSynonym ){
+ int bEof = 1;
+ Fts5ExprTerm *p;
+
+ /* Find the firstest rowid any synonym points to. */
+ i64 iRowid = fts5ExprSynonymRowid(pTerm, pExpr->bDesc, 0);
+
+ /* Advance each iterator that currently points to iRowid. Or, if iFrom
+ ** is valid - each iterator that points to a rowid before iFrom. */
+ for(p=pTerm; p; p=p->pSynonym){
+ if( sqlite3Fts5IterEof(p->pIter)==0 ){
+ i64 ii = p->pIter->iRowid;
+ if( ii==iRowid
+ || (bFromValid && ii!=iFrom && (ii>iFrom)==pExpr->bDesc)
+ ){
+ if( bFromValid ){
+ rc = sqlite3Fts5IterNextFrom(p->pIter, iFrom);
+ }else{
+ rc = sqlite3Fts5IterNext(p->pIter);
+ }
+ if( rc!=SQLITE_OK ) break;
+ if( sqlite3Fts5IterEof(p->pIter)==0 ){
+ bEof = 0;
+ }
+ }else{
bEof = 0;
}
}
+ }
- if( bEof ){
- pNode->bEof = 1;
- return rc;
- }
+ /* Set the EOF flag if either all synonym iterators are at EOF or an
+ ** error has occurred. */
+ pNode->bEof = (rc || bEof);
+ }else{
+ Fts5IndexIter *pIter = pTerm->pIter;
+
+ assert( Fts5NodeIsString(pNode) );
+ if( bFromValid ){
+ rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
+ }else{
+ rc = sqlite3Fts5IterNext(pIter);
}
+
+ pNode->bEof = (rc || sqlite3Fts5IterEof(pIter));
+ }
+
+ if( pNode->bEof==0 ){
+ assert( rc==SQLITE_OK );
+ rc = fts5ExprNodeTest_STRING(pExpr, pNode);
}
return rc;
}
-/* fts5ExprNodeNext() calls fts5ExprNodeNextMatch(). And vice-versa. */
-static int fts5ExprNodeNextMatch(Fts5Expr*, Fts5ExprNode*);
+static int fts5ExprNodeTest_TERM(
+ Fts5Expr *pExpr, /* Expression that pNear is a part of */
+ Fts5ExprNode *pNode /* The "NEAR" node (FTS5_TERM) */
+){
+ /* As this "NEAR" object is actually a single phrase that consists
+ ** of a single term only, grab pointers into the poslist managed by the
+ ** fts5_index.c iterator object. This is much faster than synthesizing
+ ** a new poslist the way we have to for more complicated phrase or NEAR
+ ** expressions. */
+ Fts5ExprPhrase *pPhrase = pNode->pNear->apPhrase[0];
+ Fts5IndexIter *pIter = pPhrase->aTerm[0].pIter;
+
+ assert( pNode->eType==FTS5_TERM );
+ assert( pNode->pNear->nPhrase==1 && pPhrase->nTerm==1 );
+ assert( pPhrase->aTerm[0].pSynonym==0 );
+
+ pPhrase->poslist.n = pIter->nData;
+ if( pExpr->pConfig->eDetail==FTS5_DETAIL_FULL ){
+ pPhrase->poslist.p = (u8*)pIter->pData;
+ }
+ pNode->iRowid = pIter->iRowid;
+ pNode->bNomatch = (pPhrase->poslist.n==0);
+ return SQLITE_OK;
+}
/*
-** If pExpr is an ASC iterator, this function returns a value with the
-** same sign as:
-**
-** (iLhs - iRhs)
-**
-** Otherwise, if this is a DESC iterator, the opposite is returned:
-**
-** (iRhs - iLhs)
+** xNext() method for a node of type FTS5_TERM.
*/
-static int fts5RowidCmp(
- Fts5Expr *pExpr,
- i64 iLhs,
- i64 iRhs
+static int fts5ExprNodeNext_TERM(
+ Fts5Expr *pExpr,
+ Fts5ExprNode *pNode,
+ int bFromValid,
+ i64 iFrom
){
- assert( pExpr->bDesc==0 || pExpr->bDesc==1 );
- if( pExpr->bDesc==0 ){
- if( iLhs<iRhs ) return -1;
- return (iLhs > iRhs);
+ int rc;
+ Fts5IndexIter *pIter = pNode->pNear->apPhrase[0]->aTerm[0].pIter;
+
+ assert( pNode->bEof==0 );
+ if( bFromValid ){
+ rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
}else{
- if( iLhs>iRhs ) return -1;
- return (iLhs < iRhs);
+ rc = sqlite3Fts5IterNext(pIter);
}
+ if( rc==SQLITE_OK && sqlite3Fts5IterEof(pIter)==0 ){
+ rc = fts5ExprNodeTest_TERM(pExpr, pNode);
+ }else{
+ pNode->bEof = 1;
+ pNode->bNomatch = 0;
+ }
+ return rc;
}
-static void fts5ExprSetEof(Fts5ExprNode *pNode){
+static void fts5ExprNodeTest_OR(
+ Fts5Expr *pExpr, /* Expression of which pNode is a part */
+ Fts5ExprNode *pNode /* Expression node to test */
+){
+ Fts5ExprNode *pNext = pNode->apChild[0];
int i;
- pNode->bEof = 1;
- for(i=0; i<pNode->nChild; i++){
- fts5ExprSetEof(pNode->apChild[i]);
- }
-}
-static void fts5ExprNodeZeroPoslist(Fts5ExprNode *pNode){
- if( pNode->eType==FTS5_STRING || pNode->eType==FTS5_TERM ){
- Fts5ExprNearset *pNear = pNode->pNear;
- int i;
- for(i=0; i<pNear->nPhrase; i++){
- Fts5ExprPhrase *pPhrase = pNear->apPhrase[i];
- pPhrase->poslist.n = 0;
- }
- }else{
- int i;
- for(i=0; i<pNode->nChild; i++){
- fts5ExprNodeZeroPoslist(pNode->apChild[i]);
+ for(i=1; i<pNode->nChild; i++){
+ Fts5ExprNode *pChild = pNode->apChild[i];
+ int cmp = fts5NodeCompare(pExpr, pNext, pChild);
+ if( cmp>0 || (cmp==0 && pChild->bNomatch==0) ){
+ pNext = pChild;
}
}
+ pNode->iRowid = pNext->iRowid;
+ pNode->bEof = pNext->bEof;
+ pNode->bNomatch = pNext->bNomatch;
}
+static int fts5ExprNodeNext_OR(
+ Fts5Expr *pExpr,
+ Fts5ExprNode *pNode,
+ int bFromValid,
+ i64 iFrom
+){
+ int i;
+ i64 iLast = pNode->iRowid;
-static int fts5ExprNodeNext(Fts5Expr*, Fts5ExprNode*, int, i64);
+ for(i=0; i<pNode->nChild; i++){
+ Fts5ExprNode *p1 = pNode->apChild[i];
+ assert( p1->bEof || fts5RowidCmp(pExpr, p1->iRowid, iLast)>=0 );
+ if( p1->bEof==0 ){
+ if( (p1->iRowid==iLast)
+ || (bFromValid && fts5RowidCmp(pExpr, p1->iRowid, iFrom)<0)
+ ){
+ int rc = fts5ExprNodeNext(pExpr, p1, bFromValid, iFrom);
+ if( rc!=SQLITE_OK ){
+ pNode->bNomatch = 0;
+ return rc;
+ }
+ }
+ }
+ }
+
+ fts5ExprNodeTest_OR(pExpr, pNode);
+ return SQLITE_OK;
+}
/*
** Argument pNode is an FTS5_AND node.
*/
-static int fts5ExprAndNextRowid(
+static int fts5ExprNodeTest_AND(
Fts5Expr *pExpr, /* Expression pPhrase belongs to */
Fts5ExprNode *pAnd /* FTS5_AND node to advance */
){
bMatch = 1;
for(iChild=0; iChild<pAnd->nChild; iChild++){
Fts5ExprNode *pChild = pAnd->apChild[iChild];
- if( 0 && pChild->eType==FTS5_STRING ){
- /* TODO */
- }else{
- int cmp = fts5RowidCmp(pExpr, iLast, pChild->iRowid);
- if( cmp>0 ){
- /* Advance pChild until it points to iLast or laster */
- rc = fts5ExprNodeNext(pExpr, pChild, 1, iLast);
- if( rc!=SQLITE_OK ) return rc;
+ int cmp = fts5RowidCmp(pExpr, iLast, pChild->iRowid);
+ if( cmp>0 ){
+ /* Advance pChild until it points to iLast or laster */
+ rc = fts5ExprNodeNext(pExpr, pChild, 1, iLast);
+ if( rc!=SQLITE_OK ){
+ pAnd->bNomatch = 0;
+ return rc;
}
}
return SQLITE_OK;
}
-
-/*
-** Compare the values currently indicated by the two nodes as follows:
-**
-** res = (*p1) - (*p2)
-**
-** Nodes that point to values that come later in the iteration order are
-** considered to be larger. Nodes at EOF are the largest of all.
-**
-** This means that if the iteration order is ASC, then numerically larger
-** rowids are considered larger. Or if it is the default DESC, numerically
-** smaller rowids are larger.
-*/
-static int fts5NodeCompare(
- Fts5Expr *pExpr,
- Fts5ExprNode *p1,
- Fts5ExprNode *p2
-){
- if( p2->bEof ) return -1;
- if( p1->bEof ) return +1;
- return fts5RowidCmp(pExpr, p1->iRowid, p2->iRowid);
-}
-
-/*
-** Advance node iterator pNode, part of expression pExpr. If argument
-** bFromValid is zero, then pNode is advanced exactly once. Or, if argument
-** bFromValid is non-zero, then pNode is advanced until it is at or past
-** rowid value iFrom. Whether "past" means "less than" or "greater than"
-** depends on whether this is an ASC or DESC iterator.
-*/
-static int fts5ExprNodeNext(
+static int fts5ExprNodeNext_AND(
Fts5Expr *pExpr,
Fts5ExprNode *pNode,
int bFromValid,
i64 iFrom
){
- int rc = SQLITE_OK;
-
- if( pNode->bEof==0 ){
- switch( pNode->eType ){
- case FTS5_STRING: {
- rc = fts5ExprNearAdvanceFirst(pExpr, pNode, bFromValid, iFrom);
- break;
- };
-
- case FTS5_TERM: {
- Fts5IndexIter *pIter = pNode->pNear->apPhrase[0]->aTerm[0].pIter;
- if( bFromValid ){
- rc = sqlite3Fts5IterNextFrom(pIter, iFrom);
- }else{
- rc = sqlite3Fts5IterNext(pIter);
- }
- if( rc==SQLITE_OK && sqlite3Fts5IterEof(pIter)==0 ){
- assert( rc==SQLITE_OK );
- rc = fts5ExprTokenTest(pExpr, pNode);
- }else{
- pNode->bEof = 1;
- }
- return rc;
- };
-
- case FTS5_AND: {
- Fts5ExprNode *pLeft = pNode->apChild[0];
- rc = fts5ExprNodeNext(pExpr, pLeft, bFromValid, iFrom);
- break;
- }
-
- case FTS5_OR: {
- int i;
- i64 iLast = pNode->iRowid;
-
- for(i=0; rc==SQLITE_OK && i<pNode->nChild; i++){
- Fts5ExprNode *p1 = pNode->apChild[i];
- assert( p1->bEof || fts5RowidCmp(pExpr, p1->iRowid, iLast)>=0 );
- if( p1->bEof==0 ){
- if( (p1->iRowid==iLast)
- || (bFromValid && fts5RowidCmp(pExpr, p1->iRowid, iFrom)<0)
- ){
- rc = fts5ExprNodeNext(pExpr, p1, bFromValid, iFrom);
- }
- }
- }
-
- break;
- }
+ int rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom);
+ if( rc==SQLITE_OK ){
+ rc = fts5ExprNodeTest_AND(pExpr, pNode);
+ }else{
+ pNode->bNomatch = 0;
+ }
+ return rc;
+}
- default: assert( pNode->eType==FTS5_NOT ); {
- assert( pNode->nChild==2 );
- rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom);
- break;
- }
- }
+static int fts5ExprNodeTest_NOT(
+ Fts5Expr *pExpr, /* Expression pPhrase belongs to */
+ Fts5ExprNode *pNode /* FTS5_NOT node to advance */
+){
+ int rc = SQLITE_OK;
+ Fts5ExprNode *p1 = pNode->apChild[0];
+ Fts5ExprNode *p2 = pNode->apChild[1];
+ assert( pNode->nChild==2 );
- if( rc==SQLITE_OK ){
- rc = fts5ExprNodeNextMatch(pExpr, pNode);
+ while( rc==SQLITE_OK && p1->bEof==0 ){
+ int cmp = fts5NodeCompare(pExpr, p1, p2);
+ if( cmp>0 ){
+ rc = fts5ExprNodeNext(pExpr, p2, 1, p1->iRowid);
+ cmp = fts5NodeCompare(pExpr, p1, p2);
}
+ assert( rc!=SQLITE_OK || cmp<=0 );
+ if( cmp || p2->bNomatch ) break;
+ rc = fts5ExprNodeNext(pExpr, p1, 0, 0);
+ }
+ pNode->bEof = p1->bEof;
+ pNode->bNomatch = p1->bNomatch;
+ pNode->iRowid = p1->iRowid;
+ if( p1->bEof ){
+ fts5ExprNodeZeroPoslist(p2);
}
-
- /* Assert that if bFromValid was true, either:
- **
- ** a) an error occurred, or
- ** b) the node is now at EOF, or
- ** c) the node is now at or past rowid iFrom.
- */
- assert( bFromValid==0
- || rc!=SQLITE_OK /* a */
- || pNode->bEof /* b */
- || pNode->iRowid==iFrom || pExpr->bDesc==(pNode->iRowid<iFrom) /* c */
- );
-
return rc;
}
+static int fts5ExprNodeNext_NOT(
+ Fts5Expr *pExpr,
+ Fts5ExprNode *pNode,
+ int bFromValid,
+ i64 iFrom
+){
+ int rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom);
+ if( rc==SQLITE_OK ){
+ rc = fts5ExprNodeTest_NOT(pExpr, pNode);
+ }
+ if( rc!=SQLITE_OK ){
+ pNode->bNomatch = 0;
+ }
+ return rc;
+}
/*
** If pNode currently points to a match, this function returns SQLITE_OK
** without modifying it. Otherwise, pNode is advanced until it does point
** to a match or EOF is reached.
*/
-static int fts5ExprNodeNextMatch(
+static int fts5ExprNodeTest(
Fts5Expr *pExpr, /* Expression of which pNode is a part */
Fts5ExprNode *pNode /* Expression node to test */
){
switch( pNode->eType ){
case FTS5_STRING: {
- /* Advance the iterators until they all point to the same rowid */
- rc = fts5ExprNearNextMatch(pExpr, pNode);
+ rc = fts5ExprNodeTest_STRING(pExpr, pNode);
break;
}
case FTS5_TERM: {
- rc = fts5ExprTokenTest(pExpr, pNode);
+ rc = fts5ExprNodeTest_TERM(pExpr, pNode);
break;
}
case FTS5_AND: {
- rc = fts5ExprAndNextRowid(pExpr, pNode);
+ rc = fts5ExprNodeTest_AND(pExpr, pNode);
break;
}
case FTS5_OR: {
- Fts5ExprNode *pNext = pNode->apChild[0];
- int i;
-
- for(i=1; i<pNode->nChild; i++){
- Fts5ExprNode *pChild = pNode->apChild[i];
- int cmp = fts5NodeCompare(pExpr, pNext, pChild);
- if( cmp>0 || (cmp==0 && pChild->bNomatch==0) ){
- pNext = pChild;
- }
- }
- pNode->iRowid = pNext->iRowid;
- pNode->bEof = pNext->bEof;
- pNode->bNomatch = pNext->bNomatch;
+ fts5ExprNodeTest_OR(pExpr, pNode);
break;
}
default: assert( pNode->eType==FTS5_NOT ); {
- Fts5ExprNode *p1 = pNode->apChild[0];
- Fts5ExprNode *p2 = pNode->apChild[1];
- assert( pNode->nChild==2 );
-
- while( rc==SQLITE_OK && p1->bEof==0 ){
- int cmp = fts5NodeCompare(pExpr, p1, p2);
- if( cmp>0 ){
- rc = fts5ExprNodeNext(pExpr, p2, 1, p1->iRowid);
- cmp = fts5NodeCompare(pExpr, p1, p2);
- }
- assert( rc!=SQLITE_OK || cmp<=0 );
- if( cmp || p2->bNomatch ) break;
- rc = fts5ExprNodeNext(pExpr, p1, 0, 0);
- }
- pNode->bEof = p1->bEof;
- pNode->iRowid = p1->iRowid;
+ rc = fts5ExprNodeTest_NOT(pExpr, pNode);
break;
}
}
static int fts5ExprNodeFirst(Fts5Expr *pExpr, Fts5ExprNode *pNode){
int rc = SQLITE_OK;
pNode->bEof = 0;
+ pNode->bNomatch = 0;
if( Fts5NodeIsString(pNode) ){
/* Initialize all term iterators in the NEAR object. */
rc = fts5ExprNearInitAll(pExpr, pNode);
+ }else if( pNode->xNext==0 ){
+ pNode->bEof = 1;
}else{
int i;
+ int nEof = 0;
for(i=0; i<pNode->nChild && rc==SQLITE_OK; i++){
+ Fts5ExprNode *pChild = pNode->apChild[i];
rc = fts5ExprNodeFirst(pExpr, pNode->apChild[i]);
+ assert( pChild->bEof==0 || pChild->bEof==1 );
+ nEof += pChild->bEof;
}
pNode->iRowid = pNode->apChild[0]->iRowid;
+
+ switch( pNode->eType ){
+ case FTS5_AND:
+ if( nEof>0 ) fts5ExprSetEof(pNode);
+ break;
+
+ case FTS5_OR:
+ if( pNode->nChild==nEof ) fts5ExprSetEof(pNode);
+ break;
+
+ default:
+ assert( pNode->eType==FTS5_NOT );
+ pNode->bEof = pNode->apChild[0]->bEof;
+ break;
+ }
}
if( rc==SQLITE_OK ){
- rc = fts5ExprNodeNextMatch(pExpr, pNode);
+ rc = fts5ExprNodeTest(pExpr, pNode);
}
return rc;
}
*/
static int sqlite3Fts5ExprFirst(Fts5Expr *p, Fts5Index *pIdx, i64 iFirst, int bDesc){
Fts5ExprNode *pRoot = p->pRoot;
- int rc = SQLITE_OK;
- if( pRoot ){
- p->pIndex = pIdx;
- p->bDesc = bDesc;
- rc = fts5ExprNodeFirst(p, pRoot);
+ int rc; /* Return code */
- /* If not at EOF but the current rowid occurs earlier than iFirst in
- ** the iteration order, move to document iFirst or later. */
- if( pRoot->bEof==0 && fts5RowidCmp(p, pRoot->iRowid, iFirst)<0 ){
- rc = fts5ExprNodeNext(p, pRoot, 1, iFirst);
- }
+ p->pIndex = pIdx;
+ p->bDesc = bDesc;
+ rc = fts5ExprNodeFirst(p, pRoot);
- /* If the iterator is not at a real match, skip forward until it is. */
- while( pRoot->bNomatch && rc==SQLITE_OK && pRoot->bEof==0 ){
- rc = fts5ExprNodeNext(p, pRoot, 0, 0);
- }
+ /* If not at EOF but the current rowid occurs earlier than iFirst in
+ ** the iteration order, move to document iFirst or later. */
+ if( rc==SQLITE_OK
+ && 0==pRoot->bEof
+ && fts5RowidCmp(p, pRoot->iRowid, iFirst)<0
+ ){
+ rc = fts5ExprNodeNext(p, pRoot, 1, iFirst);
+ }
+
+ /* If the iterator is not at a real match, skip forward until it is. */
+ while( pRoot->bNomatch ){
+ assert( pRoot->bEof==0 && rc==SQLITE_OK );
+ rc = fts5ExprNodeNext(p, pRoot, 0, 0);
}
return rc;
}
static int sqlite3Fts5ExprNext(Fts5Expr *p, i64 iLast){
int rc;
Fts5ExprNode *pRoot = p->pRoot;
+ assert( pRoot->bEof==0 && pRoot->bNomatch==0 );
do {
rc = fts5ExprNodeNext(p, pRoot, 0, 0);
- }while( pRoot->bNomatch && pRoot->bEof==0 && rc==SQLITE_OK );
+ assert( pRoot->bNomatch==0 || (rc==SQLITE_OK && pRoot->bEof==0) );
+ }while( pRoot->bNomatch );
if( fts5RowidCmp(p, pRoot->iRowid, iLast)>0 ){
pRoot->bEof = 1;
}
}
static int sqlite3Fts5ExprEof(Fts5Expr *p){
- return (p->pRoot==0 || p->pRoot->bEof);
+ return p->pRoot->bEof;
}
static i64 sqlite3Fts5ExprRowid(Fts5Expr *p){
Fts5ExprTerm *pTerm = &pPhrase->aTerm[i];
sqlite3_free(pTerm->zTerm);
sqlite3Fts5IterClose(pTerm->pIter);
-
for(pSyn=pTerm->pSynonym; pSyn; pSyn=pNext){
pNext = pSyn->pSynonym;
sqlite3Fts5IterClose(pSyn->pIter);
+ fts5BufferFree((Fts5Buffer*)&pSyn[1]);
sqlite3_free(pSyn);
}
}
}
}
+/*
+** Set the "bFirst" flag on the first token of the phrase passed as the
+** only argument.
+*/
+static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase *pPhrase){
+ if( pPhrase && pPhrase->nTerm ){
+ pPhrase->aTerm[0].bFirst = 1;
+ }
+}
+
/*
** If argument pNear is NULL, then a new Fts5ExprNearset object is allocated
** and populated with pPhrase. Or, if pNear is not NULL, phrase pPhrase is
sqlite3Fts5ParseNearsetFree(pNear);
sqlite3Fts5ParsePhraseFree(pPhrase);
}else{
+ if( pRet->nPhrase>0 ){
+ Fts5ExprPhrase *pLast = pRet->apPhrase[pRet->nPhrase-1];
+ assert( pLast==pParse->apPhrase[pParse->nPhrase-2] );
+ if( pPhrase->nTerm==0 ){
+ fts5ExprPhraseFree(pPhrase);
+ pRet->nPhrase--;
+ pParse->nPhrase--;
+ pPhrase = pLast;
+ }else if( pLast->nTerm==0 ){
+ fts5ExprPhraseFree(pLast);
+ pParse->apPhrase[pParse->nPhrase-2] = pPhrase;
+ pParse->nPhrase--;
+ pRet->nPhrase--;
+ }
+ }
pRet->apPhrase[pRet->nPhrase++] = pPhrase;
}
return pRet;
TokenCtx *pCtx = (TokenCtx*)pContext;
Fts5ExprPhrase *pPhrase = pCtx->pPhrase;
+ UNUSED_PARAM2(iUnused1, iUnused2);
+
/* If an error has already occurred, this is a no-op */
if( pCtx->rc!=SQLITE_OK ) return pCtx->rc;
+ if( nToken>FTS5_MAX_TOKEN_SIZE ) nToken = FTS5_MAX_TOKEN_SIZE;
- assert( pPhrase==0 || pPhrase->nTerm>0 );
- if( pPhrase && (tflags & FTS5_TOKEN_COLOCATED) ){
+ if( pPhrase && pPhrase->nTerm>0 && (tflags & FTS5_TOKEN_COLOCATED) ){
Fts5ExprTerm *pSyn;
- int nByte = sizeof(Fts5ExprTerm) + nToken+1;
+ int nByte = sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer) + nToken+1;
pSyn = (Fts5ExprTerm*)sqlite3_malloc(nByte);
if( pSyn==0 ){
rc = SQLITE_NOMEM;
}else{
memset(pSyn, 0, nByte);
- pSyn->zTerm = (char*)&pSyn[1];
+ pSyn->zTerm = ((char*)pSyn) + sizeof(Fts5ExprTerm) + sizeof(Fts5Buffer);
memcpy(pSyn->zTerm, pToken, nToken);
pSyn->pSynonym = pPhrase->aTerm[pPhrase->nTerm-1].pSynonym;
pPhrase->aTerm[pPhrase->nTerm-1].pSynonym = pSyn;
rc = fts5ParseStringFromToken(pToken, &z);
if( rc==SQLITE_OK ){
- int flags = FTS5_TOKENIZE_QUERY | (bPrefix ? FTS5_TOKENIZE_QUERY : 0);
+ int flags = FTS5_TOKENIZE_QUERY | (bPrefix ? FTS5_TOKENIZE_PREFIX : 0);
int n;
sqlite3Fts5Dequote(z);
- n = strlen(z);
+ n = (int)strlen(z);
rc = sqlite3Fts5Tokenize(pConfig, flags, z, n, &sCtx, fts5ParseTokenize);
}
sqlite3_free(z);
pParse->rc = rc;
fts5ExprPhraseFree(sCtx.pPhrase);
sCtx.pPhrase = 0;
- }else if( sCtx.pPhrase ){
+ }else{
if( pAppend==0 ){
if( (pParse->nPhrase % 8)==0 ){
pParse->nPhrase++;
}
+ if( sCtx.pPhrase==0 ){
+ /* This happens when parsing a token or quoted phrase that contains
+ ** no token characters at all. (e.g ... MATCH '""'). */
+ sCtx.pPhrase = sqlite3Fts5MallocZero(&pParse->rc, sizeof(Fts5ExprPhrase));
+ }else if( sCtx.pPhrase->nTerm ){
+ sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = (u8)bPrefix;
+ }
pParse->apPhrase[pParse->nPhrase-1] = sCtx.pPhrase;
- assert( sCtx.pPhrase->nTerm>0 );
- sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = bPrefix;
}
return sCtx.pPhrase;
** expression passed as the second argument.
*/
static int sqlite3Fts5ExprClonePhrase(
- Fts5Config *pConfig,
Fts5Expr *pExpr,
int iPhrase,
Fts5Expr **ppNew
){
int rc = SQLITE_OK; /* Return code */
Fts5ExprPhrase *pOrig; /* The phrase extracted from pExpr */
- int i; /* Used to iterate through phrase terms */
-
Fts5Expr *pNew = 0; /* Expression to return via *ppNew */
-
TokenCtx sCtx = {0,0}; /* Context object for fts5ParseTokenize */
-
pOrig = pExpr->apExprPhrase[iPhrase];
-
pNew = (Fts5Expr*)sqlite3Fts5MallocZero(&rc, sizeof(Fts5Expr));
if( rc==SQLITE_OK ){
pNew->apExprPhrase = (Fts5ExprPhrase**)sqlite3Fts5MallocZero(&rc,
pNew->pRoot->pNear = (Fts5ExprNearset*)sqlite3Fts5MallocZero(&rc,
sizeof(Fts5ExprNearset) + sizeof(Fts5ExprPhrase*));
}
-
- for(i=0; rc==SQLITE_OK && i<pOrig->nTerm; i++){
- int tflags = 0;
- Fts5ExprTerm *p;
- for(p=&pOrig->aTerm[i]; p && rc==SQLITE_OK; p=p->pSynonym){
- const char *zTerm = p->zTerm;
- rc = fts5ParseTokenize((void*)&sCtx, tflags, zTerm, strlen(zTerm), 0, 0);
- tflags = FTS5_TOKEN_COLOCATED;
+ if( rc==SQLITE_OK ){
+ Fts5Colset *pColsetOrig = pOrig->pNode->pNear->pColset;
+ if( pColsetOrig ){
+ int nByte = sizeof(Fts5Colset) + (pColsetOrig->nCol-1) * sizeof(int);
+ Fts5Colset *pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&rc, nByte);
+ if( pColset ){
+ memcpy(pColset, pColsetOrig, nByte);
+ }
+ pNew->pRoot->pNear->pColset = pColset;
}
- if( rc==SQLITE_OK ){
- sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix;
+ }
+
+ if( pOrig->nTerm ){
+ int i; /* Used to iterate through phrase terms */
+ for(i=0; rc==SQLITE_OK && i<pOrig->nTerm; i++){
+ int tflags = 0;
+ Fts5ExprTerm *p;
+ for(p=&pOrig->aTerm[i]; p && rc==SQLITE_OK; p=p->pSynonym){
+ const char *zTerm = p->zTerm;
+ rc = fts5ParseTokenize((void*)&sCtx, tflags, zTerm, (int)strlen(zTerm),
+ 0, 0);
+ tflags = FTS5_TOKEN_COLOCATED;
+ }
+ if( rc==SQLITE_OK ){
+ sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix;
+ sCtx.pPhrase->aTerm[i].bFirst = pOrig->aTerm[i].bFirst;
+ }
}
+ }else{
+ /* This happens when parsing a token or quoted phrase that contains
+ ** no token characters at all. (e.g ... MATCH '""'). */
+ sCtx.pPhrase = sqlite3Fts5MallocZero(&rc, sizeof(Fts5ExprPhrase));
}
if( rc==SQLITE_OK ){
/* All the allocations succeeded. Put the expression object together. */
pNew->pIndex = pExpr->pIndex;
+ pNew->pConfig = pExpr->pConfig;
pNew->nPhrase = 1;
pNew->apExprPhrase[0] = sCtx.pPhrase;
pNew->pRoot->pNear->apPhrase[0] = sCtx.pPhrase;
pNew->pRoot->pNear->nPhrase = 1;
sCtx.pPhrase->pNode = pNew->pRoot;
- if( pOrig->nTerm==1 && pOrig->aTerm[0].pSynonym==0 ){
+ if( pOrig->nTerm==1
+ && pOrig->aTerm[0].pSynonym==0
+ && pOrig->aTerm[0].bFirst==0
+ ){
pNew->pRoot->eType = FTS5_TERM;
+ pNew->pRoot->xNext = fts5ExprNodeNext_TERM;
}else{
pNew->pRoot->eType = FTS5_STRING;
+ pNew->pRoot->xNext = fts5ExprNodeNext_STRING;
}
}else{
sqlite3Fts5ExprFree(pNew);
Fts5ExprNearset *pNear,
Fts5Token *p
){
- int nNear = 0;
- int i;
- if( p->n ){
- for(i=0; i<p->n; i++){
- char c = (char)p->p[i];
- if( c<'0' || c>'9' ){
- sqlite3Fts5ParseError(
- pParse, "expected integer, got \"%.*s\"", p->n, p->p
- );
- return;
+ if( pNear ){
+ int nNear = 0;
+ int i;
+ if( p->n ){
+ for(i=0; i<p->n; i++){
+ char c = (char)p->p[i];
+ if( c<'0' || c>'9' ){
+ sqlite3Fts5ParseError(
+ pParse, "expected integer, got \"%.*s\"", p->n, p->p
+ );
+ return;
+ }
+ nNear = nNear * 10 + (p->p[i] - '0');
}
- nNear = nNear * 10 + (p->p[i] - '0');
+ }else{
+ nNear = FTS5_DEFAULT_NEARDIST;
}
- }else{
- nNear = FTS5_DEFAULT_NEARDIST;
+ pNear->nNear = nNear;
}
- pNear->nNear = nNear;
}
/*
return pNew;
}
+/*
+** Allocate and return an Fts5Colset object specifying the inverse of
+** the colset passed as the second argument. Free the colset passed
+** as the second argument before returning.
+*/
+static Fts5Colset *sqlite3Fts5ParseColsetInvert(Fts5Parse *pParse, Fts5Colset *p){
+ Fts5Colset *pRet;
+ int nCol = pParse->pConfig->nCol;
+
+ pRet = (Fts5Colset*)sqlite3Fts5MallocZero(&pParse->rc,
+ sizeof(Fts5Colset) + sizeof(int)*nCol
+ );
+ if( pRet ){
+ int i;
+ int iOld = 0;
+ for(i=0; i<nCol; i++){
+ if( iOld>=p->nCol || p->aiCol[iOld]!=i ){
+ pRet->aiCol[pRet->nCol++] = i;
+ }else{
+ iOld++;
+ }
+ }
+ }
+
+ sqlite3_free(p);
+ return pRet;
+}
+
static Fts5Colset *sqlite3Fts5ParseColset(
Fts5Parse *pParse, /* Store SQLITE_NOMEM here if required */
Fts5Colset *pColset, /* Existing colset object */
return pRet;
}
+/*
+** If argument pOrig is NULL, or if (*pRc) is set to anything other than
+** SQLITE_OK when this function is called, NULL is returned.
+**
+** Otherwise, a copy of (*pOrig) is made into memory obtained from
+** sqlite3Fts5MallocZero() and a pointer to it returned. If the allocation
+** fails, (*pRc) is set to SQLITE_NOMEM and NULL is returned.
+*/
+static Fts5Colset *fts5CloneColset(int *pRc, Fts5Colset *pOrig){
+ Fts5Colset *pRet;
+ if( pOrig ){
+ int nByte = sizeof(Fts5Colset) + (pOrig->nCol-1) * sizeof(int);
+ pRet = (Fts5Colset*)sqlite3Fts5MallocZero(pRc, nByte);
+ if( pRet ){
+ memcpy(pRet, pOrig, nByte);
+ }
+ }else{
+ pRet = 0;
+ }
+ return pRet;
+}
+
+/*
+** Remove from colset pColset any columns that are not also in colset pMerge.
+*/
+static void fts5MergeColset(Fts5Colset *pColset, Fts5Colset *pMerge){
+ int iIn = 0; /* Next input in pColset */
+ int iMerge = 0; /* Next input in pMerge */
+ int iOut = 0; /* Next output slot in pColset */
+
+ while( iIn<pColset->nCol && iMerge<pMerge->nCol ){
+ int iDiff = pColset->aiCol[iIn] - pMerge->aiCol[iMerge];
+ if( iDiff==0 ){
+ pColset->aiCol[iOut++] = pMerge->aiCol[iMerge];
+ iMerge++;
+ iIn++;
+ }else if( iDiff>0 ){
+ iMerge++;
+ }else{
+ iIn++;
+ }
+ }
+ pColset->nCol = iOut;
+}
+
+/*
+** Recursively apply colset pColset to expression node pNode and all of
+** its decendents. If (*ppFree) is not NULL, it contains a spare copy
+** of pColset. This function may use the spare copy and set (*ppFree) to
+** zero, or it may create copies of pColset using fts5CloneColset().
+*/
+static void fts5ParseSetColset(
+ Fts5Parse *pParse,
+ Fts5ExprNode *pNode,
+ Fts5Colset *pColset,
+ Fts5Colset **ppFree
+){
+ if( pParse->rc==SQLITE_OK ){
+ assert( pNode->eType==FTS5_TERM || pNode->eType==FTS5_STRING
+ || pNode->eType==FTS5_AND || pNode->eType==FTS5_OR
+ || pNode->eType==FTS5_NOT || pNode->eType==FTS5_EOF
+ );
+ if( pNode->eType==FTS5_STRING || pNode->eType==FTS5_TERM ){
+ Fts5ExprNearset *pNear = pNode->pNear;
+ if( pNear->pColset ){
+ fts5MergeColset(pNear->pColset, pColset);
+ if( pNear->pColset->nCol==0 ){
+ pNode->eType = FTS5_EOF;
+ pNode->xNext = 0;
+ }
+ }else if( *ppFree ){
+ pNear->pColset = pColset;
+ *ppFree = 0;
+ }else{
+ pNear->pColset = fts5CloneColset(&pParse->rc, pColset);
+ }
+ }else{
+ int i;
+ assert( pNode->eType!=FTS5_EOF || pNode->nChild==0 );
+ for(i=0; i<pNode->nChild; i++){
+ fts5ParseSetColset(pParse, pNode->apChild[i], pColset, ppFree);
+ }
+ }
+ }
+}
+
+/*
+** Apply colset pColset to expression node pExpr and all of its descendents.
+*/
static void sqlite3Fts5ParseSetColset(
Fts5Parse *pParse,
- Fts5ExprNearset *pNear,
+ Fts5ExprNode *pExpr,
Fts5Colset *pColset
){
- if( pNear ){
- pNear->pColset = pColset;
+ Fts5Colset *pFree = pColset;
+ if( pParse->pConfig->eDetail==FTS5_DETAIL_NONE ){
+ pParse->rc = SQLITE_ERROR;
+ pParse->zErr = sqlite3_mprintf(
+ "fts5: column queries are not supported (detail=none)"
+ );
}else{
- sqlite3_free(pColset);
+ fts5ParseSetColset(pParse, pExpr, pColset, &pFree);
+ }
+ sqlite3_free(pFree);
+}
+
+static void fts5ExprAssignXNext(Fts5ExprNode *pNode){
+ switch( pNode->eType ){
+ case FTS5_STRING: {
+ Fts5ExprNearset *pNear = pNode->pNear;
+ if( pNear->nPhrase==1 && pNear->apPhrase[0]->nTerm==1
+ && pNear->apPhrase[0]->aTerm[0].pSynonym==0
+ && pNear->apPhrase[0]->aTerm[0].bFirst==0
+ ){
+ pNode->eType = FTS5_TERM;
+ pNode->xNext = fts5ExprNodeNext_TERM;
+ }else{
+ pNode->xNext = fts5ExprNodeNext_STRING;
+ }
+ break;
+ };
+
+ case FTS5_OR: {
+ pNode->xNext = fts5ExprNodeNext_OR;
+ break;
+ };
+
+ case FTS5_AND: {
+ pNode->xNext = fts5ExprNodeNext_AND;
+ break;
+ };
+
+ default: assert( pNode->eType==FTS5_NOT ); {
+ pNode->xNext = fts5ExprNodeNext_NOT;
+ break;
+ };
}
}
if( pRet ){
pRet->eType = eType;
pRet->pNear = pNear;
+ fts5ExprAssignXNext(pRet);
if( eType==FTS5_STRING ){
int iPhrase;
for(iPhrase=0; iPhrase<pNear->nPhrase; iPhrase++){
pNear->apPhrase[iPhrase]->pNode = pRet;
+ if( pNear->apPhrase[iPhrase]->nTerm==0 ){
+ pRet->xNext = 0;
+ pRet->eType = FTS5_EOF;
+ }
}
- if( pNear->nPhrase==1
- && pNear->apPhrase[0]->nTerm==1
- && pNear->apPhrase[0]->aTerm[0].pSynonym==0
- ){
- pRet->eType = FTS5_TERM;
+
+ if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL ){
+ Fts5ExprPhrase *pPhrase = pNear->apPhrase[0];
+ if( pNear->nPhrase!=1
+ || pPhrase->nTerm>1
+ || (pPhrase->nTerm>0 && pPhrase->aTerm[0].bFirst)
+ ){
+ assert( pParse->rc==SQLITE_OK );
+ pParse->rc = SQLITE_ERROR;
+ assert( pParse->zErr==0 );
+ pParse->zErr = sqlite3_mprintf(
+ "fts5: %s queries are not supported (detail!=full)",
+ pNear->nPhrase==1 ? "phrase": "NEAR"
+ );
+ sqlite3_free(pRet);
+ pRet = 0;
+ }
}
}else{
fts5ExprAddChildren(pRet, pLeft);
return pRet;
}
+static Fts5ExprNode *sqlite3Fts5ParseImplicitAnd(
+ Fts5Parse *pParse, /* Parse context */
+ Fts5ExprNode *pLeft, /* Left hand child expression */
+ Fts5ExprNode *pRight /* Right hand child expression */
+){
+ Fts5ExprNode *pRet = 0;
+ Fts5ExprNode *pPrev;
+
+ if( pParse->rc ){
+ sqlite3Fts5ParseNodeFree(pLeft);
+ sqlite3Fts5ParseNodeFree(pRight);
+ }else{
+
+ assert( pLeft->eType==FTS5_STRING
+ || pLeft->eType==FTS5_TERM
+ || pLeft->eType==FTS5_EOF
+ || pLeft->eType==FTS5_AND
+ );
+ assert( pRight->eType==FTS5_STRING
+ || pRight->eType==FTS5_TERM
+ || pRight->eType==FTS5_EOF
+ );
+
+ if( pLeft->eType==FTS5_AND ){
+ pPrev = pLeft->apChild[pLeft->nChild-1];
+ }else{
+ pPrev = pLeft;
+ }
+ assert( pPrev->eType==FTS5_STRING
+ || pPrev->eType==FTS5_TERM
+ || pPrev->eType==FTS5_EOF
+ );
+
+ if( pRight->eType==FTS5_EOF ){
+ assert( pParse->apPhrase[pParse->nPhrase-1]==pRight->pNear->apPhrase[0] );
+ sqlite3Fts5ParseNodeFree(pRight);
+ pRet = pLeft;
+ pParse->nPhrase--;
+ }
+ else if( pPrev->eType==FTS5_EOF ){
+ Fts5ExprPhrase **ap;
+
+ if( pPrev==pLeft ){
+ pRet = pRight;
+ }else{
+ pLeft->apChild[pLeft->nChild-1] = pRight;
+ pRet = pLeft;
+ }
+
+ ap = &pParse->apPhrase[pParse->nPhrase-1-pRight->pNear->nPhrase];
+ assert( ap[0]==pPrev->pNear->apPhrase[0] );
+ memmove(ap, &ap[1], sizeof(Fts5ExprPhrase*)*pRight->pNear->nPhrase);
+ pParse->nPhrase--;
+
+ sqlite3Fts5ParseNodeFree(pPrev);
+ }
+ else{
+ pRet = sqlite3Fts5ParseNode(pParse, FTS5_AND, pLeft, pRight, 0);
+ }
+ }
+
+ return pRet;
+}
+
static char *fts5ExprTermPrint(Fts5ExprTerm *pTerm){
int nByte = 0;
Fts5ExprTerm *p;
/* Determine the maximum amount of space required. */
for(p=pTerm; p; p=p->pSynonym){
- nByte += strlen(pTerm->zTerm) * 2 + 3 + 2;
+ nByte += (int)strlen(pTerm->zTerm) * 2 + 3 + 2;
}
zQuoted = sqlite3_malloc(nByte);
for(iTerm=0; zRet && iTerm<pPhrase->nTerm; iTerm++){
char *zTerm = pPhrase->aTerm[iTerm].zTerm;
zRet = fts5PrintfAppend(zRet, "%s%s", iTerm==0?"":" ", zTerm);
+ if( pPhrase->aTerm[iTerm].bPrefix ){
+ zRet = fts5PrintfAppend(zRet, "*");
+ }
}
if( zRet ) zRet = fts5PrintfAppend(zRet, "}");
static char *fts5ExprPrint(Fts5Config *pConfig, Fts5ExprNode *pExpr){
char *zRet = 0;
+ if( pExpr->eType==0 ){
+ return sqlite3_mprintf("\"\"");
+ }else
if( pExpr->eType==FTS5_STRING || pExpr->eType==FTS5_TERM ){
Fts5ExprNearset *pNear = pExpr->pNear;
int i;
zRet = 0;
}else{
int e = pExpr->apChild[i]->eType;
- int b = (e!=FTS5_STRING && e!=FTS5_TERM);
+ int b = (e!=FTS5_STRING && e!=FTS5_TERM && e!=FTS5_EOF);
zRet = fts5PrintfAppend(zRet, "%s%s%z%s",
(i==0 ? "" : zOp),
(b?"(":""), z, (b?")":"")
rc = sqlite3Fts5ConfigParse(pGlobal, db, nConfig, azConfig, &pConfig, &zErr);
if( rc==SQLITE_OK ){
- rc = sqlite3Fts5ExprNew(pConfig, zExpr, &pExpr, &zErr);
+ rc = sqlite3Fts5ExprNew(pConfig, pConfig->nCol, zExpr, &pExpr, &zErr);
}
if( rc==SQLITE_OK ){
char *zText;
- if( pExpr->pRoot==0 ){
+ if( pExpr->pRoot->xNext==0 ){
zText = sqlite3_mprintf("");
}else if( bTcl ){
zText = fts5ExprPrintTcl(pConfig, zNearsetCmd, pExpr->pRoot);
int rc = SQLITE_OK;
void *pCtx = (void*)pGlobal;
- for(i=0; rc==SQLITE_OK && i<(sizeof(aFunc) / sizeof(aFunc[0])); i++){
+ for(i=0; rc==SQLITE_OK && i<ArraySize(aFunc); i++){
struct Fts5ExprFunc *p = &aFunc[i];
rc = sqlite3_create_function(db, p->z, -1, SQLITE_UTF8, pCtx, p->x, 0, 0);
}
return nRet;
}
+struct Fts5PoslistPopulator {
+ Fts5PoslistWriter writer;
+ int bOk; /* True if ok to populate */
+ int bMiss;
+};
+
+static Fts5PoslistPopulator *sqlite3Fts5ExprClearPoslists(Fts5Expr *pExpr, int bLive){
+ Fts5PoslistPopulator *pRet;
+ pRet = sqlite3_malloc(sizeof(Fts5PoslistPopulator)*pExpr->nPhrase);
+ if( pRet ){
+ int i;
+ memset(pRet, 0, sizeof(Fts5PoslistPopulator)*pExpr->nPhrase);
+ for(i=0; i<pExpr->nPhrase; i++){
+ Fts5Buffer *pBuf = &pExpr->apExprPhrase[i]->poslist;
+ Fts5ExprNode *pNode = pExpr->apExprPhrase[i]->pNode;
+ assert( pExpr->apExprPhrase[i]->nTerm==1 );
+ if( bLive &&
+ (pBuf->n==0 || pNode->iRowid!=pExpr->pRoot->iRowid || pNode->bEof)
+ ){
+ pRet[i].bMiss = 1;
+ }else{
+ pBuf->n = 0;
+ }
+ }
+ }
+ return pRet;
+}
+
+struct Fts5ExprCtx {
+ Fts5Expr *pExpr;
+ Fts5PoslistPopulator *aPopulator;
+ i64 iOff;
+};
+typedef struct Fts5ExprCtx Fts5ExprCtx;
+
+/*
+** TODO: Make this more efficient!
+*/
+static int fts5ExprColsetTest(Fts5Colset *pColset, int iCol){
+ int i;
+ for(i=0; i<pColset->nCol; i++){
+ if( pColset->aiCol[i]==iCol ) return 1;
+ }
+ return 0;
+}
+
+static int fts5ExprPopulatePoslistsCb(
+ void *pCtx, /* Copy of 2nd argument to xTokenize() */
+ int tflags, /* Mask of FTS5_TOKEN_* flags */
+ const char *pToken, /* Pointer to buffer containing token */
+ int nToken, /* Size of token in bytes */
+ int iUnused1, /* Byte offset of token within input text */
+ int iUnused2 /* Byte offset of end of token within input text */
+){
+ Fts5ExprCtx *p = (Fts5ExprCtx*)pCtx;
+ Fts5Expr *pExpr = p->pExpr;
+ int i;
+
+ UNUSED_PARAM2(iUnused1, iUnused2);
+
+ if( nToken>FTS5_MAX_TOKEN_SIZE ) nToken = FTS5_MAX_TOKEN_SIZE;
+ if( (tflags & FTS5_TOKEN_COLOCATED)==0 ) p->iOff++;
+ for(i=0; i<pExpr->nPhrase; i++){
+ Fts5ExprTerm *pTerm;
+ if( p->aPopulator[i].bOk==0 ) continue;
+ for(pTerm=&pExpr->apExprPhrase[i]->aTerm[0]; pTerm; pTerm=pTerm->pSynonym){
+ int nTerm = (int)strlen(pTerm->zTerm);
+ if( (nTerm==nToken || (nTerm<nToken && pTerm->bPrefix))
+ && memcmp(pTerm->zTerm, pToken, nTerm)==0
+ ){
+ int rc = sqlite3Fts5PoslistWriterAppend(
+ &pExpr->apExprPhrase[i]->poslist, &p->aPopulator[i].writer, p->iOff
+ );
+ if( rc ) return rc;
+ break;
+ }
+ }
+ }
+ return SQLITE_OK;
+}
+
+static int sqlite3Fts5ExprPopulatePoslists(
+ Fts5Config *pConfig,
+ Fts5Expr *pExpr,
+ Fts5PoslistPopulator *aPopulator,
+ int iCol,
+ const char *z, int n
+){
+ int i;
+ Fts5ExprCtx sCtx;
+ sCtx.pExpr = pExpr;
+ sCtx.aPopulator = aPopulator;
+ sCtx.iOff = (((i64)iCol) << 32) - 1;
+
+ for(i=0; i<pExpr->nPhrase; i++){
+ Fts5ExprNode *pNode = pExpr->apExprPhrase[i]->pNode;
+ Fts5Colset *pColset = pNode->pNear->pColset;
+ if( (pColset && 0==fts5ExprColsetTest(pColset, iCol))
+ || aPopulator[i].bMiss
+ ){
+ aPopulator[i].bOk = 0;
+ }else{
+ aPopulator[i].bOk = 1;
+ }
+ }
+
+ return sqlite3Fts5Tokenize(pConfig,
+ FTS5_TOKENIZE_DOCUMENT, z, n, (void*)&sCtx, fts5ExprPopulatePoslistsCb
+ );
+}
+
+static void fts5ExprClearPoslists(Fts5ExprNode *pNode){
+ if( pNode->eType==FTS5_TERM || pNode->eType==FTS5_STRING ){
+ pNode->pNear->apPhrase[0]->poslist.n = 0;
+ }else{
+ int i;
+ for(i=0; i<pNode->nChild; i++){
+ fts5ExprClearPoslists(pNode->apChild[i]);
+ }
+ }
+}
+
+static int fts5ExprCheckPoslists(Fts5ExprNode *pNode, i64 iRowid){
+ pNode->iRowid = iRowid;
+ pNode->bEof = 0;
+ switch( pNode->eType ){
+ case FTS5_TERM:
+ case FTS5_STRING:
+ return (pNode->pNear->apPhrase[0]->poslist.n>0);
+
+ case FTS5_AND: {
+ int i;
+ for(i=0; i<pNode->nChild; i++){
+ if( fts5ExprCheckPoslists(pNode->apChild[i], iRowid)==0 ){
+ fts5ExprClearPoslists(pNode);
+ return 0;
+ }
+ }
+ break;
+ }
+
+ case FTS5_OR: {
+ int i;
+ int bRet = 0;
+ for(i=0; i<pNode->nChild; i++){
+ if( fts5ExprCheckPoslists(pNode->apChild[i], iRowid) ){
+ bRet = 1;
+ }
+ }
+ return bRet;
+ }
+
+ default: {
+ assert( pNode->eType==FTS5_NOT );
+ if( 0==fts5ExprCheckPoslists(pNode->apChild[0], iRowid)
+ || 0!=fts5ExprCheckPoslists(pNode->apChild[1], iRowid)
+ ){
+ fts5ExprClearPoslists(pNode);
+ return 0;
+ }
+ break;
+ }
+ }
+ return 1;
+}
+
+static void sqlite3Fts5ExprCheckPoslists(Fts5Expr *pExpr, i64 iRowid){
+ fts5ExprCheckPoslists(pExpr->pRoot, iRowid);
+}
+
+/*
+** This function is only called for detail=columns tables.
+*/
+static int sqlite3Fts5ExprPhraseCollist(
+ Fts5Expr *pExpr,
+ int iPhrase,
+ const u8 **ppCollist,
+ int *pnCollist
+){
+ Fts5ExprPhrase *pPhrase = pExpr->apExprPhrase[iPhrase];
+ Fts5ExprNode *pNode = pPhrase->pNode;
+ int rc = SQLITE_OK;
+
+ assert( iPhrase>=0 && iPhrase<pExpr->nPhrase );
+ assert( pExpr->pConfig->eDetail==FTS5_DETAIL_COLUMNS );
+
+ if( pNode->bEof==0
+ && pNode->iRowid==pExpr->pRoot->iRowid
+ && pPhrase->poslist.n>0
+ ){
+ Fts5ExprTerm *pTerm = &pPhrase->aTerm[0];
+ if( pTerm->pSynonym ){
+ Fts5Buffer *pBuf = (Fts5Buffer*)&pTerm->pSynonym[1];
+ rc = fts5ExprSynonymList(
+ pTerm, pNode->iRowid, pBuf, (u8**)ppCollist, pnCollist
+ );
+ }else{
+ *ppCollist = pPhrase->aTerm[0].pIter->pData;
+ *pnCollist = pPhrase->aTerm[0].pIter->nData;
+ }
+ }else{
+ *ppCollist = 0;
+ *pnCollist = 0;
+ }
+
+ return rc;
+}
+
+
/*
** 2014 August 11
**
+/* #include "fts5Int.h" */
typedef struct Fts5HashEntry Fts5HashEntry;
struct Fts5Hash {
+ int eDetail; /* Copy of Fts5Config.eDetail */
int *pnByte; /* Pointer to bytes counter */
int nEntry; /* Number of entries currently in hash */
int nSlot; /* Size of aSlot[] array */
/*
** Each entry in the hash table is represented by an object of the
-** following type. Each object, its key (zKey[]) and its current data
-** are stored in a single memory allocation. The position list data
-** immediately follows the key data in memory.
+** following type. Each object, its key (a nul-terminated string) and
+** its current data are stored in a single memory allocation. The
+** key immediately follows the object in memory. The position list
+** data immediately follows the key data in memory.
**
** The data that follows the key is in a similar, but not identical format
** to the doclist data stored in the database. It is:
int nAlloc; /* Total size of allocation */
int iSzPoslist; /* Offset of space for 4-byte poslist size */
int nData; /* Total bytes of data (incl. structure) */
+ int nKey; /* Length of key in bytes */
u8 bDel; /* Set delete-flag @ iSzPoslist */
-
- int iCol; /* Column of last value written */
+ u8 bContent; /* Set content-flag (detail=none mode) */
+ i16 iCol; /* Column of last value written */
int iPos; /* Position of last value written */
i64 iRowid; /* Rowid of last value written */
- char zKey[8]; /* Nul-terminated entry key */
};
/*
-** Size of Fts5HashEntry without the zKey[] array.
+** Eqivalent to:
+**
+** char *fts5EntryKey(Fts5HashEntry *pEntry){ return zKey; }
*/
-#define FTS5_HASHENTRYSIZE (sizeof(Fts5HashEntry)-8)
-
+#define fts5EntryKey(p) ( ((char *)(&(p)[1])) )
/*
** Allocate a new hash table.
*/
-static int sqlite3Fts5HashNew(Fts5Hash **ppNew, int *pnByte){
+static int sqlite3Fts5HashNew(Fts5Config *pConfig, Fts5Hash **ppNew, int *pnByte){
int rc = SQLITE_OK;
Fts5Hash *pNew;
int nByte;
memset(pNew, 0, sizeof(Fts5Hash));
pNew->pnByte = pnByte;
+ pNew->eDetail = pConfig->eDetail;
pNew->nSlot = 1024;
nByte = sizeof(Fts5HashEntry*) * pNew->nSlot;
for(i=0; i<pHash->nSlot; i++){
while( apOld[i] ){
- int iHash;
+ unsigned int iHash;
Fts5HashEntry *p = apOld[i];
apOld[i] = p->pHashNext;
- iHash = fts5HashKey(nNew, (u8*)p->zKey, strlen(p->zKey));
+ iHash = fts5HashKey(nNew, (u8*)fts5EntryKey(p),
+ (int)strlen(fts5EntryKey(p)));
p->pHashNext = apNew[iHash];
apNew[iHash] = p;
}
return SQLITE_OK;
}
-static void fts5HashAddPoslistSize(Fts5HashEntry *p){
+static void fts5HashAddPoslistSize(Fts5Hash *pHash, Fts5HashEntry *p){
if( p->iSzPoslist ){
u8 *pPtr = (u8*)p;
- int nSz = (p->nData - p->iSzPoslist - 1); /* Size in bytes */
- int nPos = nSz*2 + p->bDel; /* Value of nPos field */
-
- assert( p->bDel==0 || p->bDel==1 );
- if( nPos<=127 ){
- pPtr[p->iSzPoslist] = nPos;
+ if( pHash->eDetail==FTS5_DETAIL_NONE ){
+ assert( p->nData==p->iSzPoslist );
+ if( p->bDel ){
+ pPtr[p->nData++] = 0x00;
+ if( p->bContent ){
+ pPtr[p->nData++] = 0x00;
+ }
+ }
}else{
- int nByte = sqlite3Fts5GetVarintLen((u32)nPos);
- memmove(&pPtr[p->iSzPoslist + nByte], &pPtr[p->iSzPoslist + 1], nSz);
- sqlite3Fts5PutVarint(&pPtr[p->iSzPoslist], nPos);
- p->nData += (nByte-1);
+ int nSz = (p->nData - p->iSzPoslist - 1); /* Size in bytes */
+ int nPos = nSz*2 + p->bDel; /* Value of nPos field */
+
+ assert( p->bDel==0 || p->bDel==1 );
+ if( nPos<=127 ){
+ pPtr[p->iSzPoslist] = (u8)nPos;
+ }else{
+ int nByte = sqlite3Fts5GetVarintLen((u32)nPos);
+ memmove(&pPtr[p->iSzPoslist + nByte], &pPtr[p->iSzPoslist + 1], nSz);
+ sqlite3Fts5PutVarint(&pPtr[p->iSzPoslist], nPos);
+ p->nData += (nByte-1);
+ }
}
- p->bDel = 0;
+
p->iSzPoslist = 0;
+ p->bDel = 0;
+ p->bContent = 0;
}
}
+/*
+** Add an entry to the in-memory hash table. The key is the concatenation
+** of bByte and (pToken/nToken). The value is (iRowid/iCol/iPos).
+**
+** (bByte || pToken) -> (iRowid,iCol,iPos)
+**
+** Or, if iCol is negative, then the value is a delete marker.
+*/
static int sqlite3Fts5HashWrite(
Fts5Hash *pHash,
i64 iRowid, /* Rowid for this entry */
Fts5HashEntry *p;
u8 *pPtr;
int nIncr = 0; /* Amount to increment (*pHash->pnByte) by */
+ int bNew; /* If non-delete entry should be written */
+
+ bNew = (pHash->eDetail==FTS5_DETAIL_FULL);
/* Attempt to locate an existing hash entry */
iHash = fts5HashKey2(pHash->nSlot, (u8)bByte, (const u8*)pToken, nToken);
for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){
- if( p->zKey[0]==bByte
- && memcmp(&p->zKey[1], pToken, nToken)==0
- && p->zKey[nToken+1]==0
+ char *zKey = fts5EntryKey(p);
+ if( zKey[0]==bByte
+ && p->nKey==nToken
+ && memcmp(&zKey[1], pToken, nToken)==0
){
break;
}
/* If an existing hash entry cannot be found, create a new one. */
if( p==0 ){
- int nByte = FTS5_HASHENTRYSIZE + (nToken+1) + 1 + 64;
+ /* Figure out how much space to allocate */
+ char *zKey;
+ int nByte = sizeof(Fts5HashEntry) + (nToken+1) + 1 + 64;
if( nByte<128 ) nByte = 128;
+ /* Grow the Fts5Hash.aSlot[] array if necessary. */
if( (pHash->nEntry*2)>=pHash->nSlot ){
int rc = fts5HashResize(pHash);
if( rc!=SQLITE_OK ) return rc;
iHash = fts5HashKey2(pHash->nSlot, (u8)bByte, (const u8*)pToken, nToken);
}
+ /* Allocate new Fts5HashEntry and add it to the hash table. */
p = (Fts5HashEntry*)sqlite3_malloc(nByte);
if( !p ) return SQLITE_NOMEM;
- memset(p, 0, FTS5_HASHENTRYSIZE);
+ memset(p, 0, sizeof(Fts5HashEntry));
p->nAlloc = nByte;
- p->zKey[0] = bByte;
- memcpy(&p->zKey[1], pToken, nToken);
- assert( iHash==fts5HashKey(pHash->nSlot, (u8*)p->zKey, nToken+1) );
- p->zKey[nToken+1] = '\0';
- p->nData = nToken+1 + 1 + FTS5_HASHENTRYSIZE;
- p->nData += sqlite3Fts5PutVarint(&((u8*)p)[p->nData], iRowid);
- p->iSzPoslist = p->nData;
- p->nData += 1;
- p->iRowid = iRowid;
+ zKey = fts5EntryKey(p);
+ zKey[0] = bByte;
+ memcpy(&zKey[1], pToken, nToken);
+ assert( iHash==fts5HashKey(pHash->nSlot, (u8*)zKey, nToken+1) );
+ p->nKey = nToken;
+ zKey[nToken+1] = '\0';
+ p->nData = nToken+1 + 1 + sizeof(Fts5HashEntry);
p->pHashNext = pHash->aSlot[iHash];
pHash->aSlot[iHash] = p;
pHash->nEntry++;
+
+ /* Add the first rowid field to the hash-entry */
+ p->nData += sqlite3Fts5PutVarint(&((u8*)p)[p->nData], iRowid);
+ p->iRowid = iRowid;
+
+ p->iSzPoslist = p->nData;
+ if( pHash->eDetail!=FTS5_DETAIL_NONE ){
+ p->nData += 1;
+ p->iCol = (pHash->eDetail==FTS5_DETAIL_FULL ? 0 : -1);
+ }
+
nIncr += p->nData;
- }
+ }else{
- /* Check there is enough space to append a new entry. Worst case scenario
- ** is:
- **
- ** + 9 bytes for a new rowid,
- ** + 4 byte reserved for the "poslist size" varint.
- ** + 1 byte for a "new column" byte,
- ** + 3 bytes for a new column number (16-bit max) as a varint,
- ** + 5 bytes for the new position offset (32-bit max).
- */
- if( (p->nAlloc - p->nData) < (9 + 4 + 1 + 3 + 5) ){
- int nNew = p->nAlloc * 2;
- Fts5HashEntry *pNew;
- Fts5HashEntry **pp;
- pNew = (Fts5HashEntry*)sqlite3_realloc(p, nNew);
- if( pNew==0 ) return SQLITE_NOMEM;
- pNew->nAlloc = nNew;
- for(pp=&pHash->aSlot[iHash]; *pp!=p; pp=&(*pp)->pHashNext);
- *pp = pNew;
- p = pNew;
+ /* Appending to an existing hash-entry. Check that there is enough
+ ** space to append the largest possible new entry. Worst case scenario
+ ** is:
+ **
+ ** + 9 bytes for a new rowid,
+ ** + 4 byte reserved for the "poslist size" varint.
+ ** + 1 byte for a "new column" byte,
+ ** + 3 bytes for a new column number (16-bit max) as a varint,
+ ** + 5 bytes for the new position offset (32-bit max).
+ */
+ if( (p->nAlloc - p->nData) < (9 + 4 + 1 + 3 + 5) ){
+ int nNew = p->nAlloc * 2;
+ Fts5HashEntry *pNew;
+ Fts5HashEntry **pp;
+ pNew = (Fts5HashEntry*)sqlite3_realloc(p, nNew);
+ if( pNew==0 ) return SQLITE_NOMEM;
+ pNew->nAlloc = nNew;
+ for(pp=&pHash->aSlot[iHash]; *pp!=p; pp=&(*pp)->pHashNext);
+ *pp = pNew;
+ p = pNew;
+ }
+ nIncr -= p->nData;
}
+ assert( (p->nAlloc - p->nData) >= (9 + 4 + 1 + 3 + 5) );
+
pPtr = (u8*)p;
- nIncr -= p->nData;
/* If this is a new rowid, append the 4-byte size field for the previous
** entry, and the new rowid for this entry. */
if( iRowid!=p->iRowid ){
- fts5HashAddPoslistSize(p);
+ fts5HashAddPoslistSize(pHash, p);
p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iRowid - p->iRowid);
- p->iSzPoslist = p->nData;
- p->nData += 1;
- p->iCol = 0;
- p->iPos = 0;
p->iRowid = iRowid;
+ bNew = 1;
+ p->iSzPoslist = p->nData;
+ if( pHash->eDetail!=FTS5_DETAIL_NONE ){
+ p->nData += 1;
+ p->iCol = (pHash->eDetail==FTS5_DETAIL_FULL ? 0 : -1);
+ p->iPos = 0;
+ }
}
if( iCol>=0 ){
- /* Append a new column value, if necessary */
- assert( iCol>=p->iCol );
- if( iCol!=p->iCol ){
- pPtr[p->nData++] = 0x01;
- p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iCol);
- p->iCol = iCol;
- p->iPos = 0;
- }
+ if( pHash->eDetail==FTS5_DETAIL_NONE ){
+ p->bContent = 1;
+ }else{
+ /* Append a new column value, if necessary */
+ assert( iCol>=p->iCol );
+ if( iCol!=p->iCol ){
+ if( pHash->eDetail==FTS5_DETAIL_FULL ){
+ pPtr[p->nData++] = 0x01;
+ p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iCol);
+ p->iCol = (i16)iCol;
+ p->iPos = 0;
+ }else{
+ bNew = 1;
+ p->iCol = (i16)(iPos = iCol);
+ }
+ }
- /* Append the new position offset */
- p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iPos - p->iPos + 2);
- p->iPos = iPos;
+ /* Append the new position offset, if necessary */
+ if( bNew ){
+ p->nData += sqlite3Fts5PutVarint(&pPtr[p->nData], iPos - p->iPos + 2);
+ p->iPos = iPos;
+ }
+ }
}else{
/* This is a delete. Set the delete flag. */
p->bDel = 1;
}
- nIncr += p->nData;
+ nIncr += p->nData;
*pHash->pnByte += nIncr;
return SQLITE_OK;
}
p1 = 0;
}else{
int i = 0;
- while( p1->zKey[i]==p2->zKey[i] ) i++;
+ char *zKey1 = fts5EntryKey(p1);
+ char *zKey2 = fts5EntryKey(p2);
+ while( zKey1[i]==zKey2[i] ) i++;
- if( ((u8)p1->zKey[i])>((u8)p2->zKey[i]) ){
+ if( ((u8)zKey1[i])>((u8)zKey2[i]) ){
/* p2 is smaller */
*ppOut = p2;
ppOut = &p2->pScanNext;
for(iSlot=0; iSlot<pHash->nSlot; iSlot++){
Fts5HashEntry *pIter;
for(pIter=pHash->aSlot[iSlot]; pIter; pIter=pIter->pHashNext){
- if( pTerm==0 || 0==memcmp(pIter->zKey, pTerm, nTerm) ){
+ if( pTerm==0 || 0==memcmp(fts5EntryKey(pIter), pTerm, nTerm) ){
Fts5HashEntry *pEntry = pIter;
pEntry->pScanNext = 0;
for(i=0; ap[i]; i++){
int *pnDoclist /* OUT: Size of doclist in bytes */
){
unsigned int iHash = fts5HashKey(pHash->nSlot, (const u8*)pTerm, nTerm);
+ char *zKey = 0;
Fts5HashEntry *p;
for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){
- if( memcmp(p->zKey, pTerm, nTerm)==0 && p->zKey[nTerm]==0 ) break;
+ zKey = fts5EntryKey(p);
+ if( memcmp(zKey, pTerm, nTerm)==0 && zKey[nTerm]==0 ) break;
}
if( p ){
- fts5HashAddPoslistSize(p);
- *ppDoclist = (const u8*)&p->zKey[nTerm+1];
- *pnDoclist = p->nData - (FTS5_HASHENTRYSIZE + nTerm + 1);
+ fts5HashAddPoslistSize(pHash, p);
+ *ppDoclist = (const u8*)&zKey[nTerm+1];
+ *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1);
}else{
*ppDoclist = 0;
*pnDoclist = 0;
){
Fts5HashEntry *p;
if( (p = pHash->pScan) ){
- int nTerm = strlen(p->zKey);
- fts5HashAddPoslistSize(p);
- *pzTerm = p->zKey;
- *ppDoclist = (const u8*)&p->zKey[nTerm+1];
- *pnDoclist = p->nData - (FTS5_HASHENTRYSIZE + nTerm + 1);
+ char *zKey = fts5EntryKey(p);
+ int nTerm = (int)strlen(zKey);
+ fts5HashAddPoslistSize(pHash, p);
+ *pzTerm = zKey;
+ *ppDoclist = (const u8*)&zKey[nTerm+1];
+ *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1);
}else{
*pzTerm = 0;
*ppDoclist = 0;
*/
+/* #include "fts5Int.h" */
/*
** Overview:
typedef struct Fts5DlidxIter Fts5DlidxIter;
typedef struct Fts5DlidxLvl Fts5DlidxLvl;
typedef struct Fts5DlidxWriter Fts5DlidxWriter;
+typedef struct Fts5Iter Fts5Iter;
typedef struct Fts5PageWriter Fts5PageWriter;
typedef struct Fts5SegIter Fts5SegIter;
typedef struct Fts5DoclistIter Fts5DoclistIter;
** in-memory hash tables before they are flushed to disk.
*/
Fts5Hash *pHash; /* Hash table for in-memory data */
- int nMaxPendingData; /* Max pending data before flush to disk */
int nPendingData; /* Current bytes of pending data */
i64 iWriteRowid; /* Rowid for current doc being written */
int bDelete; /* Current write is a delete */
sqlite3_stmt *pIdxDeleter; /* "DELETE FROM %_idx WHERE segid=? */
sqlite3_stmt *pIdxSelect;
int nRead; /* Total number of blocks read */
+
+ sqlite3_stmt *pDataVersion;
+ i64 iStructVersion; /* data_version when pStruct read */
+ Fts5Structure *pStruct; /* Current db structure (or NULL) */
};
struct Fts5DoclistIter {
int iBtPage; /* Page number corresponding to btterm */
};
-/*
-** Object for iterating through the merged results of one or more segments,
-** visiting each term/rowid pair in the merged data.
-**
-** nSeg is always a power of two greater than or equal to the number of
-** segments that this object is merging data from. Both the aSeg[] and
-** aFirst[] arrays are sized at nSeg entries. The aSeg[] array is padded
-** with zeroed objects - these are handled as if they were iterators opened
-** on empty segments.
-**
-** The results of comparing segments aSeg[N] and aSeg[N+1], where N is an
-** even number, is stored in aFirst[(nSeg+N)/2]. The "result" of the
-** comparison in this context is the index of the iterator that currently
-** points to the smaller term/rowid combination. Iterators at EOF are
-** considered to be greater than all other iterators.
-**
-** aFirst[1] contains the index in aSeg[] of the iterator that points to
-** the smallest key overall. aFirst[0] is unused.
-*/
-
typedef struct Fts5CResult Fts5CResult;
struct Fts5CResult {
u16 iFirst; /* aSeg[] index of firstest iterator */
Fts5Data *pNextLeaf; /* Leaf page (iLeafPgno+1) */
int iLeafOffset; /* Byte offset within current leaf */
+ /* Next method */
+ void (*xNext)(Fts5Index*, Fts5SegIter*, int*);
+
/* The page and offset from which the current term was read. The offset
** is the offset of the first rowid in the current doclist. */
int iTermLeafPgno;
Fts5Buffer term; /* Current term */
i64 iRowid; /* Current rowid */
int nPos; /* Number of bytes in current position list */
- int bDel; /* True if the delete flag is set */
+ u8 bDel; /* True if the delete flag is set */
};
/*
#define FTS5_SEGITER_ONETERM 0x01
#define FTS5_SEGITER_REVERSE 0x02
-
/*
** Argument is a pointer to an Fts5Data structure that contains a leaf
** page. This macro evaluates to true if the leaf contains no terms, or
#define fts5LeafFirstRowidOff(x) (fts5GetU16((x)->p))
/*
+** Object for iterating through the merged results of one or more segments,
+** visiting each term/rowid pair in the merged data.
+**
+** nSeg is always a power of two greater than or equal to the number of
+** segments that this object is merging data from. Both the aSeg[] and
+** aFirst[] arrays are sized at nSeg entries. The aSeg[] array is padded
+** with zeroed objects - these are handled as if they were iterators opened
+** on empty segments.
+**
+** The results of comparing segments aSeg[N] and aSeg[N+1], where N is an
+** even number, is stored in aFirst[(nSeg+N)/2]. The "result" of the
+** comparison in this context is the index of the iterator that currently
+** points to the smaller term/rowid combination. Iterators at EOF are
+** considered to be greater than all other iterators.
+**
+** aFirst[1] contains the index in aSeg[] of the iterator that points to
+** the smallest key overall. aFirst[0] is unused.
+**
** poslist:
** Used by sqlite3Fts5IterPoslist() when the poslist needs to be buffered.
** There is no way to tell if this is populated or not.
*/
-struct Fts5IndexIter {
+struct Fts5Iter {
+ Fts5IndexIter base; /* Base class containing output vars */
+
Fts5Index *pIndex; /* Index that owns this iterator */
Fts5Structure *pStruct; /* Database structure for this iterator */
Fts5Buffer poslist; /* Buffer containing current poslist */
+ Fts5Colset *pColset; /* Restrict matches to these columns */
+
+ /* Invoked to set output variables. */
+ void (*xSetOutputs)(Fts5Iter*, Fts5SegIter*);
int nSeg; /* Size of aSeg[] array */
int bRev; /* True to iterate in reverse order */
u8 bSkipEmpty; /* True to skip deleted entries */
- u8 bEof; /* True at EOF */
- u8 bFiltered; /* True if column-filter already applied */
i64 iSwitchRowid; /* Firstest rowid of other than aFirst[1] */
Fts5CResult *aFirst; /* Current merge state (see above) */
return (res==0 ? (pLeft->n - pRight->n) : res);
}
-#ifdef SQLITE_DEBUG
-static int fts5BlobCompare(
- const u8 *pLeft, int nLeft,
- const u8 *pRight, int nRight
-){
- int nCmp = MIN(nLeft, nRight);
- int res = memcmp(pLeft, pRight, nCmp);
- return (res==0 ? (nLeft - nRight) : res);
-}
-#endif
-
static int fts5LeafFirstTermOff(Fts5Data *pLeaf){
int ret;
fts5GetVarint32(&pLeaf->p[pLeaf->szLeaf], ret);
}
}
-
/*
** Retrieve a record from the %_data table.
**
sqlite3_free(pData);
}
+static Fts5Data *fts5LeafRead(Fts5Index *p, i64 iRowid){
+ Fts5Data *pRet = fts5DataRead(p, iRowid);
+ if( pRet ){
+ if( pRet->szLeaf>pRet->nn ){
+ p->rc = FTS5_CORRUPT;
+ fts5DataRelease(pRet);
+ pRet = 0;
+ }
+ }
+ return pRet;
+}
+
static int fts5IndexPrepareStmt(
Fts5Index *p,
sqlite3_stmt **ppStmt,
){
if( p->rc==SQLITE_OK ){
if( zSql ){
- p->rc = sqlite3_prepare_v2(p->pConfig->db, zSql, -1, ppStmt, 0);
+ p->rc = sqlite3_prepare_v3(p->pConfig->db, zSql, -1,
+ SQLITE_PREPARE_PERSISTENT, ppStmt, 0);
}else{
p->rc = SQLITE_NOMEM;
}
sqlite3_bind_blob(p->pWriter, 2, pData, nData, SQLITE_STATIC);
sqlite3_step(p->pWriter);
p->rc = sqlite3_reset(p->pWriter);
+ sqlite3_bind_null(p->pWriter, 2);
}
/*
if( zSql==0 ){
rc = SQLITE_NOMEM;
}else{
- rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &p->pDeleter, 0);
+ rc = sqlite3_prepare_v3(pConfig->db, zSql, -1,
+ SQLITE_PREPARE_PERSISTENT, &p->pDeleter, 0);
sqlite3_free(zSql);
}
if( rc!=SQLITE_OK ){
for(iLvl=0; rc==SQLITE_OK && iLvl<nLevel; iLvl++){
Fts5StructureLevel *pLvl = &pRet->aLevel[iLvl];
- int nTotal;
+ int nTotal = 0;
int iSeg;
- i += fts5GetVarint32(&pData[i], pLvl->nMerge);
- i += fts5GetVarint32(&pData[i], nTotal);
- assert( nTotal>=pLvl->nMerge );
- pLvl->aSeg = (Fts5StructureSegment*)sqlite3Fts5MallocZero(&rc,
- nTotal * sizeof(Fts5StructureSegment)
- );
+ if( i>=nData ){
+ rc = FTS5_CORRUPT;
+ }else{
+ i += fts5GetVarint32(&pData[i], pLvl->nMerge);
+ i += fts5GetVarint32(&pData[i], nTotal);
+ assert( nTotal>=pLvl->nMerge );
+ pLvl->aSeg = (Fts5StructureSegment*)sqlite3Fts5MallocZero(&rc,
+ nTotal * sizeof(Fts5StructureSegment)
+ );
+ }
if( rc==SQLITE_OK ){
pLvl->nSeg = nTotal;
for(iSeg=0; iSeg<nTotal; iSeg++){
+ if( i>=nData ){
+ rc = FTS5_CORRUPT;
+ break;
+ }
i += fts5GetVarint32(&pData[i], pLvl->aSeg[iSeg].iSegid);
i += fts5GetVarint32(&pData[i], pLvl->aSeg[iSeg].pgnoFirst);
i += fts5GetVarint32(&pData[i], pLvl->aSeg[iSeg].pgnoLast);
}
- }else{
- fts5StructureRelease(pRet);
- pRet = 0;
}
}
+ if( rc!=SQLITE_OK ){
+ fts5StructureRelease(pRet);
+ pRet = 0;
+ }
}
*ppOut = pRet;
}
}
+static Fts5Structure *fts5StructureReadUncached(Fts5Index *p){
+ Fts5Structure *pRet = 0;
+ Fts5Config *pConfig = p->pConfig;
+ int iCookie; /* Configuration cookie */
+ Fts5Data *pData;
+
+ pData = fts5DataRead(p, FTS5_STRUCTURE_ROWID);
+ if( p->rc==SQLITE_OK ){
+ /* TODO: Do we need this if the leaf-index is appended? Probably... */
+ memset(&pData->p[pData->nn], 0, FTS5_DATA_PADDING);
+ p->rc = fts5StructureDecode(pData->p, pData->nn, &iCookie, &pRet);
+ if( p->rc==SQLITE_OK && pConfig->iCookie!=iCookie ){
+ p->rc = sqlite3Fts5ConfigLoad(pConfig, iCookie);
+ }
+ fts5DataRelease(pData);
+ if( p->rc!=SQLITE_OK ){
+ fts5StructureRelease(pRet);
+ pRet = 0;
+ }
+ }
+
+ return pRet;
+}
+
+static i64 fts5IndexDataVersion(Fts5Index *p){
+ i64 iVersion = 0;
+
+ if( p->rc==SQLITE_OK ){
+ if( p->pDataVersion==0 ){
+ p->rc = fts5IndexPrepareStmt(p, &p->pDataVersion,
+ sqlite3_mprintf("PRAGMA %Q.data_version", p->pConfig->zDb)
+ );
+ if( p->rc ) return 0;
+ }
+
+ if( SQLITE_ROW==sqlite3_step(p->pDataVersion) ){
+ iVersion = sqlite3_column_int64(p->pDataVersion, 0);
+ }
+ p->rc = sqlite3_reset(p->pDataVersion);
+ }
+
+ return iVersion;
+}
+
/*
** Read, deserialize and return the structure record.
**
** is called, it is a no-op.
*/
static Fts5Structure *fts5StructureRead(Fts5Index *p){
- Fts5Config *pConfig = p->pConfig;
- Fts5Structure *pRet = 0; /* Object to return */
- int iCookie; /* Configuration cookie */
- Fts5Data *pData;
- pData = fts5DataRead(p, FTS5_STRUCTURE_ROWID);
- if( p->rc ) return 0;
- /* TODO: Do we need this if the leaf-index is appended? Probably... */
- memset(&pData->p[pData->nn], 0, FTS5_DATA_PADDING);
- p->rc = fts5StructureDecode(pData->p, pData->nn, &iCookie, &pRet);
- if( p->rc==SQLITE_OK && pConfig->iCookie!=iCookie ){
- p->rc = sqlite3Fts5ConfigLoad(pConfig, iCookie);
+ if( p->pStruct==0 ){
+ p->iStructVersion = fts5IndexDataVersion(p);
+ if( p->rc==SQLITE_OK ){
+ p->pStruct = fts5StructureReadUncached(p);
+ }
}
- fts5DataRelease(pData);
- if( p->rc!=SQLITE_OK ){
- fts5StructureRelease(pRet);
- pRet = 0;
+#if 0
+ else{
+ Fts5Structure *pTest = fts5StructureReadUncached(p);
+ if( pTest ){
+ int i, j;
+ assert_nc( p->pStruct->nSegment==pTest->nSegment );
+ assert_nc( p->pStruct->nLevel==pTest->nLevel );
+ for(i=0; i<pTest->nLevel; i++){
+ assert_nc( p->pStruct->aLevel[i].nMerge==pTest->aLevel[i].nMerge );
+ assert_nc( p->pStruct->aLevel[i].nSeg==pTest->aLevel[i].nSeg );
+ for(j=0; j<pTest->aLevel[i].nSeg; j++){
+ Fts5StructureSegment *p1 = &pTest->aLevel[i].aSeg[j];
+ Fts5StructureSegment *p2 = &p->pStruct->aLevel[i].aSeg[j];
+ assert_nc( p1->iSegid==p2->iSegid );
+ assert_nc( p1->pgnoFirst==p2->pgnoFirst );
+ assert_nc( p1->pgnoLast==p2->pgnoLast );
+ }
+ }
+ fts5StructureRelease(pTest);
+ }
+ }
+#endif
+
+ if( p->rc!=SQLITE_OK ) return 0;
+ assert( p->iStructVersion!=0 );
+ assert( p->pStruct!=0 );
+ fts5StructureRef(p->pStruct);
+ return p->pStruct;
+}
+
+static void fts5StructureInvalidate(Fts5Index *p){
+ if( p->pStruct ){
+ fts5StructureRelease(p->pStruct);
+ p->pStruct = 0;
}
- return pRet;
}
/*
}
#endif
+#define fts5BufferSafeAppendBlob(pBuf, pBlob, nBlob) { \
+ assert( (pBuf)->nSpace>=((pBuf)->n+nBlob) ); \
+ memcpy(&(pBuf)->p[(pBuf)->n], pBlob, nBlob); \
+ (pBuf)->n += nBlob; \
+}
+
+#define fts5BufferSafeAppendVarint(pBuf, iVal) { \
+ (pBuf)->n += sqlite3Fts5PutVarint(&(pBuf)->p[(pBuf)->n], (iVal)); \
+ assert( (pBuf)->nSpace>=(pBuf)->n ); \
+}
+
+
/*
** Serialize and store the "structure" record.
**
/* Append the current configuration cookie */
iCookie = p->pConfig->iCookie;
if( iCookie<0 ) iCookie = 0;
- fts5BufferAppend32(&p->rc, &buf, iCookie);
- fts5BufferAppendVarint(&p->rc, &buf, pStruct->nLevel);
- fts5BufferAppendVarint(&p->rc, &buf, pStruct->nSegment);
- fts5BufferAppendVarint(&p->rc, &buf, (i64)pStruct->nWriteCounter);
+ if( 0==sqlite3Fts5BufferSize(&p->rc, &buf, 4+9+9+9) ){
+ sqlite3Fts5Put32(buf.p, iCookie);
+ buf.n = 4;
+ fts5BufferSafeAppendVarint(&buf, pStruct->nLevel);
+ fts5BufferSafeAppendVarint(&buf, pStruct->nSegment);
+ fts5BufferSafeAppendVarint(&buf, (i64)pStruct->nWriteCounter);
+ }
for(iLvl=0; iLvl<pStruct->nLevel; iLvl++){
int iSeg; /* Used to iterate through segments */
pIter->pLeaf = pIter->pNextLeaf;
pIter->pNextLeaf = 0;
}else if( pIter->iLeafPgno<=pSeg->pgnoLast ){
- pIter->pLeaf = fts5DataRead(p,
+ pIter->pLeaf = fts5LeafRead(p,
FTS5_SEGMENT_ROWID(pSeg->iSegid, pIter->iLeafPgno)
);
}else{
static void fts5SegIterLoadNPos(Fts5Index *p, Fts5SegIter *pIter){
if( p->rc==SQLITE_OK ){
int iOff = pIter->iLeafOffset; /* Offset to read at */
- int nSz;
ASSERT_SZLEAF_OK(pIter->pLeaf);
- fts5FastGetVarint32(pIter->pLeaf->p, iOff, nSz);
- pIter->bDel = (nSz & 0x0001);
- pIter->nPos = nSz>>1;
+ if( p->pConfig->eDetail==FTS5_DETAIL_NONE ){
+ int iEod = MIN(pIter->iEndofDoclist, pIter->pLeaf->szLeaf);
+ pIter->bDel = 0;
+ pIter->nPos = 1;
+ if( iOff<iEod && pIter->pLeaf->p[iOff]==0 ){
+ pIter->bDel = 1;
+ iOff++;
+ if( iOff<iEod && pIter->pLeaf->p[iOff]==0 ){
+ pIter->nPos = 1;
+ iOff++;
+ }else{
+ pIter->nPos = 0;
+ }
+ }
+ }else{
+ int nSz;
+ fts5FastGetVarint32(pIter->pLeaf->p, iOff, nSz);
+ pIter->bDel = (nSz & 0x0001);
+ pIter->nPos = nSz>>1;
+ assert_nc( pIter->nPos>=0 );
+ }
pIter->iLeafOffset = iOff;
}
}
int nNew; /* Bytes of new data */
iOff += fts5GetVarint32(&a[iOff], nNew);
+ if( iOff+nNew>pIter->pLeaf->nn ){
+ p->rc = FTS5_CORRUPT;
+ return;
+ }
pIter->term.n = nKeep;
fts5BufferAppendBlob(&p->rc, &pIter->term, nNew, &a[iOff]);
iOff += nNew;
fts5SegIterLoadRowid(p, pIter);
}
+static void fts5SegIterNext(Fts5Index*, Fts5SegIter*, int*);
+static void fts5SegIterNext_Reverse(Fts5Index*, Fts5SegIter*, int*);
+static void fts5SegIterNext_None(Fts5Index*, Fts5SegIter*, int*);
+
+static void fts5SegIterSetNext(Fts5Index *p, Fts5SegIter *pIter){
+ if( pIter->flags & FTS5_SEGITER_REVERSE ){
+ pIter->xNext = fts5SegIterNext_Reverse;
+ }else if( p->pConfig->eDetail==FTS5_DETAIL_NONE ){
+ pIter->xNext = fts5SegIterNext_None;
+ }else{
+ pIter->xNext = fts5SegIterNext;
+ }
+}
+
/*
** Initialize the iterator object pIter to iterate through the entries in
** segment pSeg. The iterator is left pointing to the first entry when
if( p->rc==SQLITE_OK ){
memset(pIter, 0, sizeof(*pIter));
+ fts5SegIterSetNext(p, pIter);
pIter->pSeg = pSeg;
pIter->iLeafPgno = pSeg->pgnoFirst-1;
fts5SegIterNextPage(p, pIter);
** byte of the position list content associated with said rowid.
*/
static void fts5SegIterReverseInitPage(Fts5Index *p, Fts5SegIter *pIter){
+ int eDetail = p->pConfig->eDetail;
int n = pIter->pLeaf->szLeaf;
int i = pIter->iLeafOffset;
u8 *a = pIter->pLeaf->p;
ASSERT_SZLEAF_OK(pIter->pLeaf);
while( 1 ){
i64 iDelta = 0;
- int nPos;
- int bDummy;
- i += fts5GetPoslistSize(&a[i], &nPos, &bDummy);
- i += nPos;
+ if( eDetail==FTS5_DETAIL_NONE ){
+ /* todo */
+ if( i<n && a[i]==0 ){
+ i++;
+ if( i<n && a[i]==0 ) i++;
+ }
+ }else{
+ int nPos;
+ int bDummy;
+ i += fts5GetPoslistSize(&a[i], &nPos, &bDummy);
+ i += nPos;
+ }
if( i>=n ) break;
i += fts5GetVarint(&a[i], (u64*)&iDelta);
pIter->iRowid += iDelta;
+ /* If necessary, grow the pIter->aRowidOffset[] array. */
if( iRowidOffset>=pIter->nRowidOffset ){
int nNew = pIter->nRowidOffset + 8;
int *aNew = (int*)sqlite3_realloc(pIter->aRowidOffset, nNew*sizeof(int));
if( pNew ){
/* iTermLeafOffset may be equal to szLeaf if the term is the last
** thing on the page - i.e. the first rowid is on the following page.
- ** In this case leaf pIter->pLeaf==0, this iterator is at EOF. */
- if( pIter->iLeafPgno==pIter->iTermLeafPgno
- && pIter->iTermLeafOffset<pNew->szLeaf
- ){
- pIter->pLeaf = pNew;
- pIter->iLeafOffset = pIter->iTermLeafOffset;
+ ** In this case leave pIter->pLeaf==0, this iterator is at EOF. */
+ if( pIter->iLeafPgno==pIter->iTermLeafPgno ){
+ assert( pIter->pLeaf==0 );
+ if( pIter->iTermLeafOffset<pNew->szLeaf ){
+ pIter->pLeaf = pNew;
+ pIter->iLeafOffset = pIter->iTermLeafOffset;
+ }
}else{
int iRowidOff;
iRowidOff = fts5LeafFirstRowidOff(pNew);
** points to a delete marker. A delete marker is an entry with a 0 byte
** position-list.
*/
-static int fts5MultiIterIsEmpty(Fts5Index *p, Fts5IndexIter *pIter){
+static int fts5MultiIterIsEmpty(Fts5Index *p, Fts5Iter *pIter){
Fts5SegIter *pSeg = &pIter->aSeg[pIter->aFirst[1].iFirst];
return (p->rc==SQLITE_OK && pSeg->pLeaf && pSeg->nPos==0);
}
+/*
+** Advance iterator pIter to the next entry.
+**
+** This version of fts5SegIterNext() is only used by reverse iterators.
+*/
+static void fts5SegIterNext_Reverse(
+ Fts5Index *p, /* FTS5 backend object */
+ Fts5SegIter *pIter, /* Iterator to advance */
+ int *pbUnused /* Unused */
+){
+ assert( pIter->flags & FTS5_SEGITER_REVERSE );
+ assert( pIter->pNextLeaf==0 );
+ UNUSED_PARAM(pbUnused);
+
+ if( pIter->iRowidOffset>0 ){
+ u8 *a = pIter->pLeaf->p;
+ int iOff;
+ i64 iDelta;
+
+ pIter->iRowidOffset--;
+ pIter->iLeafOffset = pIter->aRowidOffset[pIter->iRowidOffset];
+ fts5SegIterLoadNPos(p, pIter);
+ iOff = pIter->iLeafOffset;
+ if( p->pConfig->eDetail!=FTS5_DETAIL_NONE ){
+ iOff += pIter->nPos;
+ }
+ fts5GetVarint(&a[iOff], (u64*)&iDelta);
+ pIter->iRowid -= iDelta;
+ }else{
+ fts5SegIterReverseNewPage(p, pIter);
+ }
+}
+
+/*
+** Advance iterator pIter to the next entry.
+**
+** This version of fts5SegIterNext() is only used if detail=none and the
+** iterator is not a reverse direction iterator.
+*/
+static void fts5SegIterNext_None(
+ Fts5Index *p, /* FTS5 backend object */
+ Fts5SegIter *pIter, /* Iterator to advance */
+ int *pbNewTerm /* OUT: Set for new term */
+){
+ int iOff;
+
+ assert( p->rc==SQLITE_OK );
+ assert( (pIter->flags & FTS5_SEGITER_REVERSE)==0 );
+ assert( p->pConfig->eDetail==FTS5_DETAIL_NONE );
+
+ ASSERT_SZLEAF_OK(pIter->pLeaf);
+ iOff = pIter->iLeafOffset;
+
+ /* Next entry is on the next page */
+ if( pIter->pSeg && iOff>=pIter->pLeaf->szLeaf ){
+ fts5SegIterNextPage(p, pIter);
+ if( p->rc || pIter->pLeaf==0 ) return;
+ pIter->iRowid = 0;
+ iOff = 4;
+ }
+
+ if( iOff<pIter->iEndofDoclist ){
+ /* Next entry is on the current page */
+ i64 iDelta;
+ iOff += sqlite3Fts5GetVarint(&pIter->pLeaf->p[iOff], (u64*)&iDelta);
+ pIter->iLeafOffset = iOff;
+ pIter->iRowid += iDelta;
+ }else if( (pIter->flags & FTS5_SEGITER_ONETERM)==0 ){
+ if( pIter->pSeg ){
+ int nKeep = 0;
+ if( iOff!=fts5LeafFirstTermOff(pIter->pLeaf) ){
+ iOff += fts5GetVarint32(&pIter->pLeaf->p[iOff], nKeep);
+ }
+ pIter->iLeafOffset = iOff;
+ fts5SegIterLoadTerm(p, pIter, nKeep);
+ }else{
+ const u8 *pList = 0;
+ const char *zTerm = 0;
+ int nList;
+ sqlite3Fts5HashScanNext(p->pHash);
+ sqlite3Fts5HashScanEntry(p->pHash, &zTerm, &pList, &nList);
+ if( pList==0 ) goto next_none_eof;
+ pIter->pLeaf->p = (u8*)pList;
+ pIter->pLeaf->nn = nList;
+ pIter->pLeaf->szLeaf = nList;
+ pIter->iEndofDoclist = nList;
+ sqlite3Fts5BufferSet(&p->rc,&pIter->term, (int)strlen(zTerm), (u8*)zTerm);
+ pIter->iLeafOffset = fts5GetVarint(pList, (u64*)&pIter->iRowid);
+ }
+
+ if( pbNewTerm ) *pbNewTerm = 1;
+ }else{
+ goto next_none_eof;
+ }
+
+ fts5SegIterLoadNPos(p, pIter);
+
+ return;
+ next_none_eof:
+ fts5DataRelease(pIter->pLeaf);
+ pIter->pLeaf = 0;
+}
+
+
/*
** Advance iterator pIter to the next entry.
**
Fts5SegIter *pIter, /* Iterator to advance */
int *pbNewTerm /* OUT: Set for new term */
){
+ Fts5Data *pLeaf = pIter->pLeaf;
+ int iOff;
+ int bNewTerm = 0;
+ int nKeep = 0;
+ u8 *a;
+ int n;
+
assert( pbNewTerm==0 || *pbNewTerm==0 );
- if( p->rc==SQLITE_OK ){
- if( pIter->flags & FTS5_SEGITER_REVERSE ){
- assert( pIter->pNextLeaf==0 );
- if( pIter->iRowidOffset>0 ){
- u8 *a = pIter->pLeaf->p;
- int iOff;
- int nPos;
- int bDummy;
- i64 iDelta;
-
- pIter->iRowidOffset--;
- pIter->iLeafOffset = iOff = pIter->aRowidOffset[pIter->iRowidOffset];
- iOff += fts5GetPoslistSize(&a[iOff], &nPos, &bDummy);
- iOff += nPos;
- fts5GetVarint(&a[iOff], (u64*)&iDelta);
- pIter->iRowid -= iDelta;
- fts5SegIterLoadNPos(p, pIter);
- }else{
- fts5SegIterReverseNewPage(p, pIter);
+ assert( p->pConfig->eDetail!=FTS5_DETAIL_NONE );
+
+ /* Search for the end of the position list within the current page. */
+ a = pLeaf->p;
+ n = pLeaf->szLeaf;
+
+ ASSERT_SZLEAF_OK(pLeaf);
+ iOff = pIter->iLeafOffset + pIter->nPos;
+
+ if( iOff<n ){
+ /* The next entry is on the current page. */
+ assert_nc( iOff<=pIter->iEndofDoclist );
+ if( iOff>=pIter->iEndofDoclist ){
+ bNewTerm = 1;
+ if( iOff!=fts5LeafFirstTermOff(pLeaf) ){
+ iOff += fts5GetVarint32(&a[iOff], nKeep);
}
}else{
- Fts5Data *pLeaf = pIter->pLeaf;
- int iOff;
- int bNewTerm = 0;
- int nKeep = 0;
-
- /* Search for the end of the position list within the current page. */
- u8 *a = pLeaf->p;
- int n = pLeaf->szLeaf;
+ u64 iDelta;
+ iOff += sqlite3Fts5GetVarint(&a[iOff], &iDelta);
+ pIter->iRowid += iDelta;
+ assert_nc( iDelta>0 );
+ }
+ pIter->iLeafOffset = iOff;
+ }else if( pIter->pSeg==0 ){
+ const u8 *pList = 0;
+ const char *zTerm = 0;
+ int nList = 0;
+ assert( (pIter->flags & FTS5_SEGITER_ONETERM) || pbNewTerm );
+ if( 0==(pIter->flags & FTS5_SEGITER_ONETERM) ){
+ sqlite3Fts5HashScanNext(p->pHash);
+ sqlite3Fts5HashScanEntry(p->pHash, &zTerm, &pList, &nList);
+ }
+ if( pList==0 ){
+ fts5DataRelease(pIter->pLeaf);
+ pIter->pLeaf = 0;
+ }else{
+ pIter->pLeaf->p = (u8*)pList;
+ pIter->pLeaf->nn = nList;
+ pIter->pLeaf->szLeaf = nList;
+ pIter->iEndofDoclist = nList+1;
+ sqlite3Fts5BufferSet(&p->rc, &pIter->term, (int)strlen(zTerm),
+ (u8*)zTerm);
+ pIter->iLeafOffset = fts5GetVarint(pList, (u64*)&pIter->iRowid);
+ *pbNewTerm = 1;
+ }
+ }else{
+ iOff = 0;
+ /* Next entry is not on the current page */
+ while( iOff==0 ){
+ fts5SegIterNextPage(p, pIter);
+ pLeaf = pIter->pLeaf;
+ if( pLeaf==0 ) break;
ASSERT_SZLEAF_OK(pLeaf);
- iOff = pIter->iLeafOffset + pIter->nPos;
-
- if( iOff<n ){
- /* The next entry is on the current page. */
- assert_nc( iOff<=pIter->iEndofDoclist );
- if( iOff>=pIter->iEndofDoclist ){
- bNewTerm = 1;
- if( iOff!=fts5LeafFirstTermOff(pLeaf) ){
- iOff += fts5GetVarint32(&a[iOff], nKeep);
- }
- }else{
- u64 iDelta;
- iOff += sqlite3Fts5GetVarint(&a[iOff], &iDelta);
- pIter->iRowid += iDelta;
- assert_nc( iDelta>0 );
- }
+ if( (iOff = fts5LeafFirstRowidOff(pLeaf)) && iOff<pLeaf->szLeaf ){
+ iOff += sqlite3Fts5GetVarint(&pLeaf->p[iOff], (u64*)&pIter->iRowid);
pIter->iLeafOffset = iOff;
- }else if( pIter->pSeg==0 ){
- const u8 *pList = 0;
- const char *zTerm = 0;
- int nList = 0;
- if( 0==(pIter->flags & FTS5_SEGITER_ONETERM) ){
- sqlite3Fts5HashScanNext(p->pHash);
- sqlite3Fts5HashScanEntry(p->pHash, &zTerm, &pList, &nList);
- }
- if( pList==0 ){
- fts5DataRelease(pIter->pLeaf);
- pIter->pLeaf = 0;
- }else{
- pIter->pLeaf->p = (u8*)pList;
- pIter->pLeaf->nn = nList;
- pIter->pLeaf->szLeaf = nList;
- pIter->iEndofDoclist = nList+1;
- sqlite3Fts5BufferSet(&p->rc, &pIter->term, strlen(zTerm), (u8*)zTerm);
- pIter->iLeafOffset = fts5GetVarint(pList, (u64*)&pIter->iRowid);
- if( pbNewTerm ) *pbNewTerm = 1;
- }
- }else{
- iOff = 0;
- /* Next entry is not on the current page */
- while( iOff==0 ){
- fts5SegIterNextPage(p, pIter);
- pLeaf = pIter->pLeaf;
- if( pLeaf==0 ) break;
- ASSERT_SZLEAF_OK(pLeaf);
- if( (iOff = fts5LeafFirstRowidOff(pLeaf)) && iOff<pLeaf->szLeaf ){
- iOff += sqlite3Fts5GetVarint(&pLeaf->p[iOff], (u64*)&pIter->iRowid);
- pIter->iLeafOffset = iOff;
-
- if( pLeaf->nn>pLeaf->szLeaf ){
- pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
- &pLeaf->p[pLeaf->szLeaf], pIter->iEndofDoclist
- );
- }
-
- }
- else if( pLeaf->nn>pLeaf->szLeaf ){
- pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
- &pLeaf->p[pLeaf->szLeaf], iOff
- );
- pIter->iLeafOffset = iOff;
- pIter->iEndofDoclist = iOff;
- bNewTerm = 1;
- }
- if( iOff>=pLeaf->szLeaf ){
- p->rc = FTS5_CORRUPT;
- return;
- }
+ if( pLeaf->nn>pLeaf->szLeaf ){
+ pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
+ &pLeaf->p[pLeaf->szLeaf], pIter->iEndofDoclist
+ );
}
}
+ else if( pLeaf->nn>pLeaf->szLeaf ){
+ pIter->iPgidxOff = pLeaf->szLeaf + fts5GetVarint32(
+ &pLeaf->p[pLeaf->szLeaf], iOff
+ );
+ pIter->iLeafOffset = iOff;
+ pIter->iEndofDoclist = iOff;
+ bNewTerm = 1;
+ }
+ assert_nc( iOff<pLeaf->szLeaf );
+ if( iOff>pLeaf->szLeaf ){
+ p->rc = FTS5_CORRUPT;
+ return;
+ }
+ }
+ }
- /* Check if the iterator is now at EOF. If so, return early. */
- if( pIter->pLeaf ){
- if( bNewTerm ){
- if( pIter->flags & FTS5_SEGITER_ONETERM ){
- fts5DataRelease(pIter->pLeaf);
- pIter->pLeaf = 0;
- }else{
- fts5SegIterLoadTerm(p, pIter, nKeep);
- fts5SegIterLoadNPos(p, pIter);
- if( pbNewTerm ) *pbNewTerm = 1;
- }
- }else{
- fts5SegIterLoadNPos(p, pIter);
- }
+ /* Check if the iterator is now at EOF. If so, return early. */
+ if( pIter->pLeaf ){
+ if( bNewTerm ){
+ if( pIter->flags & FTS5_SEGITER_ONETERM ){
+ fts5DataRelease(pIter->pLeaf);
+ pIter->pLeaf = 0;
+ }else{
+ fts5SegIterLoadTerm(p, pIter, nKeep);
+ fts5SegIterLoadNPos(p, pIter);
+ if( pbNewTerm ) *pbNewTerm = 1;
}
+ }else{
+ /* The following could be done by calling fts5SegIterLoadNPos(). But
+ ** this block is particularly performance critical, so equivalent
+ ** code is inlined.
+ **
+ ** Later: Switched back to fts5SegIterLoadNPos() because it supports
+ ** detail=none mode. Not ideal.
+ */
+ int nSz;
+ assert( p->rc==SQLITE_OK );
+ assert( pIter->iLeafOffset<=pIter->pLeaf->nn );
+ fts5FastGetVarint32(pIter->pLeaf->p, pIter->iLeafOffset, nSz);
+ pIter->bDel = (nSz & 0x0001);
+ pIter->nPos = nSz>>1;
+ assert_nc( pIter->nPos>=0 );
}
}
}
#define SWAPVAL(T, a, b) { T tmp; tmp=a; a=b; b=tmp; }
+#define fts5IndexSkipVarint(a, iOff) { \
+ int iEnd = iOff+9; \
+ while( (a[iOff++] & 0x80) && iOff<iEnd ); \
+}
+
/*
** Iterator pIter currently points to the first rowid in a doclist. This
** function sets the iterator up so that iterates in reverse order through
/* Currently, Fts5SegIter.iLeafOffset points to the first byte of
** position-list content for the current rowid. Back it up so that it
** points to the start of the position-list size field. */
- pIter->iLeafOffset -= sqlite3Fts5GetVarintLen(pIter->nPos*2+pIter->bDel);
+ int iPoslist;
+ if( pIter->iTermLeafPgno==pIter->iLeafPgno ){
+ iPoslist = pIter->iTermLeafOffset;
+ }else{
+ iPoslist = 4;
+ }
+ fts5IndexSkipVarint(pLeaf->p, iPoslist);
+ pIter->iLeafOffset = iPoslist;
/* If this condition is true then the largest rowid for the current
** term may not be stored on the current page. So search forward to
pIter->pDlidx = fts5DlidxIterInit(p, bRev, iSeg, pIter->iTermLeafPgno);
}
-#define fts5IndexSkipVarint(a, iOff) { \
- int iEnd = iOff+9; \
- while( (a[iOff++] & 0x80) && iOff<iEnd ); \
-}
-
/*
** The iterator object passed as the second argument currently contains
** no valid values except for the Fts5SegIter.pLeaf member variable. This
iPgidx = szLeaf;
iPgidx += fts5GetVarint32(&a[iPgidx], iTermOff);
iOff = iTermOff;
+ if( iOff>n ){
+ p->rc = FTS5_CORRUPT;
+ return;
+ }
while( 1 ){
iTermOff += nKeep;
iOff = iTermOff;
+ if( iOff>=n ){
+ p->rc = FTS5_CORRUPT;
+ return;
+ }
+
/* Read the nKeep field of the next term. */
fts5FastGetVarint32(a, iOff, nKeep);
}
if( pIter->pLeaf==0 ) return;
a = pIter->pLeaf->p;
if( fts5LeafIsTermless(pIter->pLeaf)==0 ){
- fts5GetVarint32(&pIter->pLeaf->p[pIter->pLeaf->szLeaf], iOff);
+ iPgidx = pIter->pLeaf->szLeaf;
+ iPgidx += fts5GetVarint32(&pIter->pLeaf->p[iPgidx], iOff);
if( iOff<4 || iOff>=pIter->pLeaf->szLeaf ){
p->rc = FTS5_CORRUPT;
}else{
nKeep = 0;
+ iTermOff = iOff;
+ n = pIter->pLeaf->nn;
iOff += fts5GetVarint32(&a[iOff], nNew);
break;
}
fts5SegIterLoadNPos(p, pIter);
}
+static sqlite3_stmt *fts5IdxSelectStmt(Fts5Index *p){
+ if( p->pIdxSelect==0 ){
+ Fts5Config *pConfig = p->pConfig;
+ fts5IndexPrepareStmt(p, &p->pIdxSelect, sqlite3_mprintf(
+ "SELECT pgno FROM '%q'.'%q_idx' WHERE "
+ "segid=? AND term<=? ORDER BY term DESC LIMIT 1",
+ pConfig->zDb, pConfig->zName
+ ));
+ }
+ return p->pIdxSelect;
+}
+
/*
** Initialize the object pIter to point to term pTerm/nTerm within segment
** pSeg. If there is no such term in the index, the iterator is set to EOF.
*/
static void fts5SegIterSeekInit(
Fts5Index *p, /* FTS5 backend */
- Fts5Buffer *pBuf, /* Buffer to use for loading pages */
const u8 *pTerm, int nTerm, /* Term to seek to */
int flags, /* Mask of FTS5INDEX_XXX flags */
Fts5StructureSegment *pSeg, /* Description of segment */
int iPg = 1;
int bGe = (flags & FTS5INDEX_QUERY_SCAN);
int bDlidx = 0; /* True if there is a doclist-index */
-
- static int nCall = 0;
- nCall++;
+ sqlite3_stmt *pIdxSelect = 0;
assert( bGe==0 || (flags & FTS5INDEX_QUERY_DESC)==0 );
assert( pTerm && nTerm );
/* This block sets stack variable iPg to the leaf page number that may
** contain term (pTerm/nTerm), if it is present in the segment. */
- if( p->pIdxSelect==0 ){
- Fts5Config *pConfig = p->pConfig;
- fts5IndexPrepareStmt(p, &p->pIdxSelect, sqlite3_mprintf(
- "SELECT pgno FROM '%q'.'%q_idx' WHERE "
- "segid=? AND term<=? ORDER BY term DESC LIMIT 1",
- pConfig->zDb, pConfig->zName
- ));
- }
+ pIdxSelect = fts5IdxSelectStmt(p);
if( p->rc ) return;
- sqlite3_bind_int(p->pIdxSelect, 1, pSeg->iSegid);
- sqlite3_bind_blob(p->pIdxSelect, 2, pTerm, nTerm, SQLITE_STATIC);
- if( SQLITE_ROW==sqlite3_step(p->pIdxSelect) ){
- i64 val = sqlite3_column_int(p->pIdxSelect, 0);
+ sqlite3_bind_int(pIdxSelect, 1, pSeg->iSegid);
+ sqlite3_bind_blob(pIdxSelect, 2, pTerm, nTerm, SQLITE_STATIC);
+ if( SQLITE_ROW==sqlite3_step(pIdxSelect) ){
+ i64 val = sqlite3_column_int(pIdxSelect, 0);
iPg = (int)(val>>1);
bDlidx = (val & 0x0001);
}
- p->rc = sqlite3_reset(p->pIdxSelect);
+ p->rc = sqlite3_reset(pIdxSelect);
+ sqlite3_bind_null(pIdxSelect, 2);
if( iPg<pSeg->pgnoFirst ){
iPg = pSeg->pgnoFirst;
}
}
+ fts5SegIterSetNext(p, pIter);
+
/* Either:
**
** 1) an error has occurred, or
if( pTerm==0 || (flags & FTS5INDEX_QUERY_SCAN) ){
p->rc = sqlite3Fts5HashScanInit(p->pHash, (const char*)pTerm, nTerm);
sqlite3Fts5HashScanEntry(p->pHash, (const char**)&z, &pList, &nList);
- n = (z ? strlen((const char*)z) : 0);
+ n = (z ? (int)strlen((const char*)z) : 0);
}else{
pIter->flags |= FTS5_SEGITER_ONETERM;
sqlite3Fts5HashQuery(p->pHash, (const char*)pTerm, nTerm, &pList, &nList);
pLeaf->nn = pLeaf->szLeaf = nList;
pIter->pLeaf = pLeaf;
pIter->iLeafOffset = fts5GetVarint(pLeaf->p, (u64*)&pIter->iRowid);
- pIter->iEndofDoclist = pLeaf->nn+1;
+ pIter->iEndofDoclist = pLeaf->nn;
if( flags & FTS5INDEX_QUERY_DESC ){
pIter->flags |= FTS5_SEGITER_REVERSE;
fts5SegIterLoadNPos(p, pIter);
}
}
+
+ fts5SegIterSetNext(p, pIter);
}
/*
** two iterators.
*/
static void fts5AssertComparisonResult(
- Fts5IndexIter *pIter,
+ Fts5Iter *pIter,
Fts5SegIter *p1,
Fts5SegIter *p2,
Fts5CResult *pRes
** statement used to verify that the contents of the pIter->aFirst[] array
** are correct.
*/
-static void fts5AssertMultiIterSetup(Fts5Index *p, Fts5IndexIter *pIter){
+static void fts5AssertMultiIterSetup(Fts5Index *p, Fts5Iter *pIter){
if( p->rc==SQLITE_OK ){
Fts5SegIter *pFirst = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
int i;
- assert( (pFirst->pLeaf==0)==pIter->bEof );
+ assert( (pFirst->pLeaf==0)==pIter->base.bEof );
/* Check that pIter->iSwitchRowid is set correctly. */
for(i=0; i<pIter->nSeg; i++){
** to a key that is a duplicate of another, higher priority,
** segment-iterator in the pSeg->aSeg[] array.
*/
-static int fts5MultiIterDoCompare(Fts5IndexIter *pIter, int iOut){
+static int fts5MultiIterDoCompare(Fts5Iter *pIter, int iOut){
int i1; /* Index of left-hand Fts5SegIter */
int i2; /* Index of right-hand Fts5SegIter */
int iRes;
}
}
- pRes->iFirst = iRes;
+ pRes->iFirst = (u16)iRes;
return 0;
}
}
do{
- if( bMove ) fts5SegIterNext(p, pIter, 0);
+ if( bMove && p->rc==SQLITE_OK ) pIter->xNext(p, pIter, 0);
if( pIter->pLeaf==0 ) break;
if( bRev==0 && pIter->iRowid>=iMatch ) break;
if( bRev!=0 && pIter->iRowid<=iMatch ) break;
/*
** Free the iterator object passed as the second argument.
*/
-static void fts5MultiIterFree(Fts5Index *p, Fts5IndexIter *pIter){
+static void fts5MultiIterFree(Fts5Iter *pIter){
if( pIter ){
int i;
for(i=0; i<pIter->nSeg; i++){
static void fts5MultiIterAdvanced(
Fts5Index *p, /* FTS5 backend to iterate within */
- Fts5IndexIter *pIter, /* Iterator to update aFirst[] array for */
+ Fts5Iter *pIter, /* Iterator to update aFirst[] array for */
int iChanged, /* Index of sub-iterator just advanced */
int iMinset /* Minimum entry in aFirst[] to set */
){
for(i=(pIter->nSeg+iChanged)/2; i>=iMinset && p->rc==SQLITE_OK; i=i/2){
int iEq;
if( (iEq = fts5MultiIterDoCompare(pIter, i)) ){
- fts5SegIterNext(p, &pIter->aSeg[iEq], 0);
+ Fts5SegIter *pSeg = &pIter->aSeg[iEq];
+ assert( p->rc==SQLITE_OK );
+ pSeg->xNext(p, pSeg, 0);
i = pIter->nSeg + iEq;
}
}
** that it deals with more complicated cases as well.
*/
static int fts5MultiIterAdvanceRowid(
- Fts5Index *p, /* FTS5 backend to iterate within */
- Fts5IndexIter *pIter, /* Iterator to update aFirst[] array for */
- int iChanged /* Index of sub-iterator just advanced */
+ Fts5Iter *pIter, /* Iterator to update aFirst[] array for */
+ int iChanged, /* Index of sub-iterator just advanced */
+ Fts5SegIter **ppFirst
){
Fts5SegIter *pNew = &pIter->aSeg[iChanged];
pIter->iSwitchRowid = pOther->iRowid;
}
}
- pRes->iFirst = (pNew - pIter->aSeg);
+ pRes->iFirst = (u16)(pNew - pIter->aSeg);
if( i==1 ) break;
pOther = &pIter->aSeg[ pIter->aFirst[i ^ 0x0001].iFirst ];
}
}
+ *ppFirst = pNew;
return 0;
}
/*
** Set the pIter->bEof variable based on the state of the sub-iterators.
*/
-static void fts5MultiIterSetEof(Fts5IndexIter *pIter){
+static void fts5MultiIterSetEof(Fts5Iter *pIter){
Fts5SegIter *pSeg = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
- pIter->bEof = pSeg->pLeaf==0;
+ pIter->base.bEof = pSeg->pLeaf==0;
pIter->iSwitchRowid = pSeg->iRowid;
}
*/
static void fts5MultiIterNext(
Fts5Index *p,
- Fts5IndexIter *pIter,
+ Fts5Iter *pIter,
int bFrom, /* True if argument iFrom is valid */
i64 iFrom /* Advance at least as far as this */
){
+ int bUseFrom = bFrom;
+ assert( pIter->base.bEof==0 );
+ while( p->rc==SQLITE_OK ){
+ int iFirst = pIter->aFirst[1].iFirst;
+ int bNewTerm = 0;
+ Fts5SegIter *pSeg = &pIter->aSeg[iFirst];
+ assert( p->rc==SQLITE_OK );
+ if( bUseFrom && pSeg->pDlidx ){
+ fts5SegIterNextFrom(p, pSeg, iFrom);
+ }else{
+ pSeg->xNext(p, pSeg, &bNewTerm);
+ }
+
+ if( pSeg->pLeaf==0 || bNewTerm
+ || fts5MultiIterAdvanceRowid(pIter, iFirst, &pSeg)
+ ){
+ fts5MultiIterAdvanced(p, pIter, iFirst, 1);
+ fts5MultiIterSetEof(pIter);
+ pSeg = &pIter->aSeg[pIter->aFirst[1].iFirst];
+ if( pSeg->pLeaf==0 ) return;
+ }
+
+ fts5AssertMultiIterSetup(p, pIter);
+ assert( pSeg==&pIter->aSeg[pIter->aFirst[1].iFirst] && pSeg->pLeaf );
+ if( pIter->bSkipEmpty==0 || pSeg->nPos ){
+ pIter->xSetOutputs(pIter, pSeg);
+ return;
+ }
+ bUseFrom = 0;
+ }
+}
+
+static void fts5MultiIterNext2(
+ Fts5Index *p,
+ Fts5Iter *pIter,
+ int *pbNewTerm /* OUT: True if *might* be new term */
+){
+ assert( pIter->bSkipEmpty );
if( p->rc==SQLITE_OK ){
- int bUseFrom = bFrom;
- do {
+ *pbNewTerm = 0;
+ do{
int iFirst = pIter->aFirst[1].iFirst;
- int bNewTerm = 0;
Fts5SegIter *pSeg = &pIter->aSeg[iFirst];
- assert( p->rc==SQLITE_OK );
- if( bUseFrom && pSeg->pDlidx ){
- fts5SegIterNextFrom(p, pSeg, iFrom);
- }else{
- fts5SegIterNext(p, pSeg, &bNewTerm);
- }
+ int bNewTerm = 0;
+ assert( p->rc==SQLITE_OK );
+ pSeg->xNext(p, pSeg, &bNewTerm);
if( pSeg->pLeaf==0 || bNewTerm
- || fts5MultiIterAdvanceRowid(p, pIter, iFirst)
+ || fts5MultiIterAdvanceRowid(pIter, iFirst, &pSeg)
){
fts5MultiIterAdvanced(p, pIter, iFirst, 1);
fts5MultiIterSetEof(pIter);
+ *pbNewTerm = 1;
}
fts5AssertMultiIterSetup(p, pIter);
- bUseFrom = 0;
- }while( pIter->bSkipEmpty && fts5MultiIterIsEmpty(p, pIter) );
+ }while( fts5MultiIterIsEmpty(p, pIter) );
}
}
-static Fts5IndexIter *fts5MultiIterAlloc(
+static void fts5IterSetOutputs_Noop(Fts5Iter *pUnused1, Fts5SegIter *pUnused2){
+ UNUSED_PARAM2(pUnused1, pUnused2);
+}
+
+static Fts5Iter *fts5MultiIterAlloc(
Fts5Index *p, /* FTS5 backend to iterate within */
int nSeg
){
- Fts5IndexIter *pNew;
+ Fts5Iter *pNew;
int nSlot; /* Power of two >= nSeg */
for(nSlot=2; nSlot<nSeg; nSlot=nSlot*2);
pNew = fts5IdxMalloc(p,
- sizeof(Fts5IndexIter) + /* pNew */
+ sizeof(Fts5Iter) + /* pNew */
sizeof(Fts5SegIter) * (nSlot-1) + /* pNew->aSeg[] */
sizeof(Fts5CResult) * nSlot /* pNew->aFirst[] */
);
pNew->nSeg = nSlot;
pNew->aFirst = (Fts5CResult*)&pNew->aSeg[nSlot];
pNew->pIndex = p;
+ pNew->xSetOutputs = fts5IterSetOutputs_Noop;
}
return pNew;
}
+static void fts5PoslistCallback(
+ Fts5Index *pUnused,
+ void *pContext,
+ const u8 *pChunk, int nChunk
+){
+ UNUSED_PARAM(pUnused);
+ assert_nc( nChunk>=0 );
+ if( nChunk>0 ){
+ fts5BufferSafeAppendBlob((Fts5Buffer*)pContext, pChunk, nChunk);
+ }
+}
+
+typedef struct PoslistCallbackCtx PoslistCallbackCtx;
+struct PoslistCallbackCtx {
+ Fts5Buffer *pBuf; /* Append to this buffer */
+ Fts5Colset *pColset; /* Restrict matches to this column */
+ int eState; /* See above */
+};
+
+typedef struct PoslistOffsetsCtx PoslistOffsetsCtx;
+struct PoslistOffsetsCtx {
+ Fts5Buffer *pBuf; /* Append to this buffer */
+ Fts5Colset *pColset; /* Restrict matches to this column */
+ int iRead;
+ int iWrite;
+};
+
/*
-** Allocate a new Fts5IndexIter object.
+** TODO: Make this more efficient!
+*/
+static int fts5IndexColsetTest(Fts5Colset *pColset, int iCol){
+ int i;
+ for(i=0; i<pColset->nCol; i++){
+ if( pColset->aiCol[i]==iCol ) return 1;
+ }
+ return 0;
+}
+
+static void fts5PoslistOffsetsCallback(
+ Fts5Index *pUnused,
+ void *pContext,
+ const u8 *pChunk, int nChunk
+){
+ PoslistOffsetsCtx *pCtx = (PoslistOffsetsCtx*)pContext;
+ UNUSED_PARAM(pUnused);
+ assert_nc( nChunk>=0 );
+ if( nChunk>0 ){
+ int i = 0;
+ while( i<nChunk ){
+ int iVal;
+ i += fts5GetVarint32(&pChunk[i], iVal);
+ iVal += pCtx->iRead - 2;
+ pCtx->iRead = iVal;
+ if( fts5IndexColsetTest(pCtx->pColset, iVal) ){
+ fts5BufferSafeAppendVarint(pCtx->pBuf, iVal + 2 - pCtx->iWrite);
+ pCtx->iWrite = iVal;
+ }
+ }
+ }
+}
+
+static void fts5PoslistFilterCallback(
+ Fts5Index *pUnused,
+ void *pContext,
+ const u8 *pChunk, int nChunk
+){
+ PoslistCallbackCtx *pCtx = (PoslistCallbackCtx*)pContext;
+ UNUSED_PARAM(pUnused);
+ assert_nc( nChunk>=0 );
+ if( nChunk>0 ){
+ /* Search through to find the first varint with value 1. This is the
+ ** start of the next columns hits. */
+ int i = 0;
+ int iStart = 0;
+
+ if( pCtx->eState==2 ){
+ int iCol;
+ fts5FastGetVarint32(pChunk, i, iCol);
+ if( fts5IndexColsetTest(pCtx->pColset, iCol) ){
+ pCtx->eState = 1;
+ fts5BufferSafeAppendVarint(pCtx->pBuf, 1);
+ }else{
+ pCtx->eState = 0;
+ }
+ }
+
+ do {
+ while( i<nChunk && pChunk[i]!=0x01 ){
+ while( pChunk[i] & 0x80 ) i++;
+ i++;
+ }
+ if( pCtx->eState ){
+ fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
+ }
+ if( i<nChunk ){
+ int iCol;
+ iStart = i;
+ i++;
+ if( i>=nChunk ){
+ pCtx->eState = 2;
+ }else{
+ fts5FastGetVarint32(pChunk, i, iCol);
+ pCtx->eState = fts5IndexColsetTest(pCtx->pColset, iCol);
+ if( pCtx->eState ){
+ fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
+ iStart = i;
+ }
+ }
+ }
+ }while( i<nChunk );
+ }
+}
+
+static void fts5ChunkIterate(
+ Fts5Index *p, /* Index object */
+ Fts5SegIter *pSeg, /* Poslist of this iterator */
+ void *pCtx, /* Context pointer for xChunk callback */
+ void (*xChunk)(Fts5Index*, void*, const u8*, int)
+){
+ int nRem = pSeg->nPos; /* Number of bytes still to come */
+ Fts5Data *pData = 0;
+ u8 *pChunk = &pSeg->pLeaf->p[pSeg->iLeafOffset];
+ int nChunk = MIN(nRem, pSeg->pLeaf->szLeaf - pSeg->iLeafOffset);
+ int pgno = pSeg->iLeafPgno;
+ int pgnoSave = 0;
+
+ /* This function does notmwork with detail=none databases. */
+ assert( p->pConfig->eDetail!=FTS5_DETAIL_NONE );
+
+ if( (pSeg->flags & FTS5_SEGITER_REVERSE)==0 ){
+ pgnoSave = pgno+1;
+ }
+
+ while( 1 ){
+ xChunk(p, pCtx, pChunk, nChunk);
+ nRem -= nChunk;
+ fts5DataRelease(pData);
+ if( nRem<=0 ){
+ break;
+ }else{
+ pgno++;
+ pData = fts5LeafRead(p, FTS5_SEGMENT_ROWID(pSeg->pSeg->iSegid, pgno));
+ if( pData==0 ) break;
+ pChunk = &pData->p[4];
+ nChunk = MIN(nRem, pData->szLeaf - 4);
+ if( pgno==pgnoSave ){
+ assert( pSeg->pNextLeaf==0 );
+ pSeg->pNextLeaf = pData;
+ pData = 0;
+ }
+ }
+ }
+}
+
+/*
+** Iterator pIter currently points to a valid entry (not EOF). This
+** function appends the position list data for the current entry to
+** buffer pBuf. It does not make a copy of the position-list size
+** field.
+*/
+static void fts5SegiterPoslist(
+ Fts5Index *p,
+ Fts5SegIter *pSeg,
+ Fts5Colset *pColset,
+ Fts5Buffer *pBuf
+){
+ if( 0==fts5BufferGrow(&p->rc, pBuf, pSeg->nPos) ){
+ if( pColset==0 ){
+ fts5ChunkIterate(p, pSeg, (void*)pBuf, fts5PoslistCallback);
+ }else{
+ if( p->pConfig->eDetail==FTS5_DETAIL_FULL ){
+ PoslistCallbackCtx sCtx;
+ sCtx.pBuf = pBuf;
+ sCtx.pColset = pColset;
+ sCtx.eState = fts5IndexColsetTest(pColset, 0);
+ assert( sCtx.eState==0 || sCtx.eState==1 );
+ fts5ChunkIterate(p, pSeg, (void*)&sCtx, fts5PoslistFilterCallback);
+ }else{
+ PoslistOffsetsCtx sCtx;
+ memset(&sCtx, 0, sizeof(sCtx));
+ sCtx.pBuf = pBuf;
+ sCtx.pColset = pColset;
+ fts5ChunkIterate(p, pSeg, (void*)&sCtx, fts5PoslistOffsetsCallback);
+ }
+ }
+ }
+}
+
+/*
+** IN/OUT parameter (*pa) points to a position list n bytes in size. If
+** the position list contains entries for column iCol, then (*pa) is set
+** to point to the sub-position-list for that column and the number of
+** bytes in it returned. Or, if the argument position list does not
+** contain any entries for column iCol, return 0.
+*/
+static int fts5IndexExtractCol(
+ const u8 **pa, /* IN/OUT: Pointer to poslist */
+ int n, /* IN: Size of poslist in bytes */
+ int iCol /* Column to extract from poslist */
+){
+ int iCurrent = 0; /* Anything before the first 0x01 is col 0 */
+ const u8 *p = *pa;
+ const u8 *pEnd = &p[n]; /* One byte past end of position list */
+
+ while( iCol>iCurrent ){
+ /* Advance pointer p until it points to pEnd or an 0x01 byte that is
+ ** not part of a varint. Note that it is not possible for a negative
+ ** or extremely large varint to occur within an uncorrupted position
+ ** list. So the last byte of each varint may be assumed to have a clear
+ ** 0x80 bit. */
+ while( *p!=0x01 ){
+ while( *p++ & 0x80 );
+ if( p>=pEnd ) return 0;
+ }
+ *pa = p++;
+ iCurrent = *p++;
+ if( iCurrent & 0x80 ){
+ p--;
+ p += fts5GetVarint32(p, iCurrent);
+ }
+ }
+ if( iCol!=iCurrent ) return 0;
+
+ /* Advance pointer p until it points to pEnd or an 0x01 byte that is
+ ** not part of a varint */
+ while( p<pEnd && *p!=0x01 ){
+ while( *p++ & 0x80 );
+ }
+
+ return p - (*pa);
+}
+
+static void fts5IndexExtractColset(
+ int *pRc,
+ Fts5Colset *pColset, /* Colset to filter on */
+ const u8 *pPos, int nPos, /* Position list */
+ Fts5Buffer *pBuf /* Output buffer */
+){
+ if( *pRc==SQLITE_OK ){
+ int i;
+ fts5BufferZero(pBuf);
+ for(i=0; i<pColset->nCol; i++){
+ const u8 *pSub = pPos;
+ int nSub = fts5IndexExtractCol(&pSub, nPos, pColset->aiCol[i]);
+ if( nSub ){
+ fts5BufferAppendBlob(pRc, pBuf, nSub, pSub);
+ }
+ }
+ }
+}
+
+/*
+** xSetOutputs callback used by detail=none tables.
+*/
+static void fts5IterSetOutputs_None(Fts5Iter *pIter, Fts5SegIter *pSeg){
+ assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_NONE );
+ pIter->base.iRowid = pSeg->iRowid;
+ pIter->base.nData = pSeg->nPos;
+}
+
+/*
+** xSetOutputs callback used by detail=full and detail=col tables when no
+** column filters are specified.
+*/
+static void fts5IterSetOutputs_Nocolset(Fts5Iter *pIter, Fts5SegIter *pSeg){
+ pIter->base.iRowid = pSeg->iRowid;
+ pIter->base.nData = pSeg->nPos;
+
+ assert( pIter->pIndex->pConfig->eDetail!=FTS5_DETAIL_NONE );
+ assert( pIter->pColset==0 );
+
+ if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf ){
+ /* All data is stored on the current page. Populate the output
+ ** variables to point into the body of the page object. */
+ pIter->base.pData = &pSeg->pLeaf->p[pSeg->iLeafOffset];
+ }else{
+ /* The data is distributed over two or more pages. Copy it into the
+ ** Fts5Iter.poslist buffer and then set the output pointer to point
+ ** to this buffer. */
+ fts5BufferZero(&pIter->poslist);
+ fts5SegiterPoslist(pIter->pIndex, pSeg, 0, &pIter->poslist);
+ pIter->base.pData = pIter->poslist.p;
+ }
+}
+
+/*
+** xSetOutputs callback used when the Fts5Colset object has nCol==0 (match
+** against no columns at all).
+*/
+static void fts5IterSetOutputs_ZeroColset(Fts5Iter *pIter, Fts5SegIter *pSeg){
+ UNUSED_PARAM(pSeg);
+ pIter->base.nData = 0;
+}
+
+/*
+** xSetOutputs callback used by detail=col when there is a column filter
+** and there are 100 or more columns. Also called as a fallback from
+** fts5IterSetOutputs_Col100 if the column-list spans more than one page.
+*/
+static void fts5IterSetOutputs_Col(Fts5Iter *pIter, Fts5SegIter *pSeg){
+ fts5BufferZero(&pIter->poslist);
+ fts5SegiterPoslist(pIter->pIndex, pSeg, pIter->pColset, &pIter->poslist);
+ pIter->base.iRowid = pSeg->iRowid;
+ pIter->base.pData = pIter->poslist.p;
+ pIter->base.nData = pIter->poslist.n;
+}
+
+/*
+** xSetOutputs callback used when:
+**
+** * detail=col,
+** * there is a column filter, and
+** * the table contains 100 or fewer columns.
+**
+** The last point is to ensure all column numbers are stored as
+** single-byte varints.
+*/
+static void fts5IterSetOutputs_Col100(Fts5Iter *pIter, Fts5SegIter *pSeg){
+
+ assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_COLUMNS );
+ assert( pIter->pColset );
+
+ if( pSeg->iLeafOffset+pSeg->nPos>pSeg->pLeaf->szLeaf ){
+ fts5IterSetOutputs_Col(pIter, pSeg);
+ }else{
+ u8 *a = (u8*)&pSeg->pLeaf->p[pSeg->iLeafOffset];
+ u8 *pEnd = (u8*)&a[pSeg->nPos];
+ int iPrev = 0;
+ int *aiCol = pIter->pColset->aiCol;
+ int *aiColEnd = &aiCol[pIter->pColset->nCol];
+
+ u8 *aOut = pIter->poslist.p;
+ int iPrevOut = 0;
+
+ pIter->base.iRowid = pSeg->iRowid;
+
+ while( a<pEnd ){
+ iPrev += (int)a++[0] - 2;
+ while( *aiCol<iPrev ){
+ aiCol++;
+ if( aiCol==aiColEnd ) goto setoutputs_col_out;
+ }
+ if( *aiCol==iPrev ){
+ *aOut++ = (u8)((iPrev - iPrevOut) + 2);
+ iPrevOut = iPrev;
+ }
+ }
+
+setoutputs_col_out:
+ pIter->base.pData = pIter->poslist.p;
+ pIter->base.nData = aOut - pIter->poslist.p;
+ }
+}
+
+/*
+** xSetOutputs callback used by detail=full when there is a column filter.
+*/
+static void fts5IterSetOutputs_Full(Fts5Iter *pIter, Fts5SegIter *pSeg){
+ Fts5Colset *pColset = pIter->pColset;
+ pIter->base.iRowid = pSeg->iRowid;
+
+ assert( pIter->pIndex->pConfig->eDetail==FTS5_DETAIL_FULL );
+ assert( pColset );
+
+ if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf ){
+ /* All data is stored on the current page. Populate the output
+ ** variables to point into the body of the page object. */
+ const u8 *a = &pSeg->pLeaf->p[pSeg->iLeafOffset];
+ if( pColset->nCol==1 ){
+ pIter->base.nData = fts5IndexExtractCol(&a, pSeg->nPos,pColset->aiCol[0]);
+ pIter->base.pData = a;
+ }else{
+ int *pRc = &pIter->pIndex->rc;
+ fts5BufferZero(&pIter->poslist);
+ fts5IndexExtractColset(pRc, pColset, a, pSeg->nPos, &pIter->poslist);
+ pIter->base.pData = pIter->poslist.p;
+ pIter->base.nData = pIter->poslist.n;
+ }
+ }else{
+ /* The data is distributed over two or more pages. Copy it into the
+ ** Fts5Iter.poslist buffer and then set the output pointer to point
+ ** to this buffer. */
+ fts5BufferZero(&pIter->poslist);
+ fts5SegiterPoslist(pIter->pIndex, pSeg, pColset, &pIter->poslist);
+ pIter->base.pData = pIter->poslist.p;
+ pIter->base.nData = pIter->poslist.n;
+ }
+}
+
+static void fts5IterSetOutputCb(int *pRc, Fts5Iter *pIter){
+ if( *pRc==SQLITE_OK ){
+ Fts5Config *pConfig = pIter->pIndex->pConfig;
+ if( pConfig->eDetail==FTS5_DETAIL_NONE ){
+ pIter->xSetOutputs = fts5IterSetOutputs_None;
+ }
+
+ else if( pIter->pColset==0 ){
+ pIter->xSetOutputs = fts5IterSetOutputs_Nocolset;
+ }
+
+ else if( pIter->pColset->nCol==0 ){
+ pIter->xSetOutputs = fts5IterSetOutputs_ZeroColset;
+ }
+
+ else if( pConfig->eDetail==FTS5_DETAIL_FULL ){
+ pIter->xSetOutputs = fts5IterSetOutputs_Full;
+ }
+
+ else{
+ assert( pConfig->eDetail==FTS5_DETAIL_COLUMNS );
+ if( pConfig->nCol<=100 ){
+ pIter->xSetOutputs = fts5IterSetOutputs_Col100;
+ sqlite3Fts5BufferSize(pRc, &pIter->poslist, pConfig->nCol);
+ }else{
+ pIter->xSetOutputs = fts5IterSetOutputs_Col;
+ }
+ }
+ }
+}
+
+
+/*
+** Allocate a new Fts5Iter object.
**
** The new object will be used to iterate through data in structure pStruct.
** If iLevel is -ve, then all data in all segments is merged. Or, if iLevel
static void fts5MultiIterNew(
Fts5Index *p, /* FTS5 backend to iterate within */
Fts5Structure *pStruct, /* Structure of specific index */
- int bSkipEmpty, /* True to ignore delete-keys */
int flags, /* FTS5INDEX_QUERY_XXX flags */
+ Fts5Colset *pColset, /* Colset to filter on (or NULL) */
const u8 *pTerm, int nTerm, /* Term to seek to (or NULL/0) */
int iLevel, /* Level to iterate (-1 for all) */
int nSegment, /* Number of segments to merge (iLevel>=0) */
- Fts5IndexIter **ppOut /* New object */
+ Fts5Iter **ppOut /* New object */
){
int nSeg = 0; /* Number of segment-iters in use */
int iIter = 0; /* */
int iSeg; /* Used to iterate through segments */
- Fts5Buffer buf = {0,0,0}; /* Buffer used by fts5SegIterSeekInit() */
Fts5StructureLevel *pLvl;
- Fts5IndexIter *pNew;
+ Fts5Iter *pNew;
assert( (pTerm==0 && nTerm==0) || iLevel<0 );
*ppOut = pNew = fts5MultiIterAlloc(p, nSeg);
if( pNew==0 ) return;
pNew->bRev = (0!=(flags & FTS5INDEX_QUERY_DESC));
- pNew->bSkipEmpty = bSkipEmpty;
+ pNew->bSkipEmpty = (0!=(flags & FTS5INDEX_QUERY_SKIPEMPTY));
pNew->pStruct = pStruct;
+ pNew->pColset = pColset;
fts5StructureRef(pStruct);
+ if( (flags & FTS5INDEX_QUERY_NOOUTPUT)==0 ){
+ fts5IterSetOutputCb(&p->rc, pNew);
+ }
/* Initialize each of the component segment iterators. */
- if( iLevel<0 ){
- Fts5StructureLevel *pEnd = &pStruct->aLevel[pStruct->nLevel];
- if( p->pHash ){
- /* Add a segment iterator for the current contents of the hash table. */
- Fts5SegIter *pIter = &pNew->aSeg[iIter++];
- fts5SegIterHashInit(p, pTerm, nTerm, flags, pIter);
- }
- for(pLvl=&pStruct->aLevel[0]; pLvl<pEnd; pLvl++){
- for(iSeg=pLvl->nSeg-1; iSeg>=0; iSeg--){
- Fts5StructureSegment *pSeg = &pLvl->aSeg[iSeg];
+ if( p->rc==SQLITE_OK ){
+ if( iLevel<0 ){
+ Fts5StructureLevel *pEnd = &pStruct->aLevel[pStruct->nLevel];
+ if( p->pHash ){
+ /* Add a segment iterator for the current contents of the hash table. */
Fts5SegIter *pIter = &pNew->aSeg[iIter++];
- if( pTerm==0 ){
- fts5SegIterInit(p, pSeg, pIter);
- }else{
- fts5SegIterSeekInit(p, &buf, pTerm, nTerm, flags, pSeg, pIter);
+ fts5SegIterHashInit(p, pTerm, nTerm, flags, pIter);
+ }
+ for(pLvl=&pStruct->aLevel[0]; pLvl<pEnd; pLvl++){
+ for(iSeg=pLvl->nSeg-1; iSeg>=0; iSeg--){
+ Fts5StructureSegment *pSeg = &pLvl->aSeg[iSeg];
+ Fts5SegIter *pIter = &pNew->aSeg[iIter++];
+ if( pTerm==0 ){
+ fts5SegIterInit(p, pSeg, pIter);
+ }else{
+ fts5SegIterSeekInit(p, pTerm, nTerm, flags, pSeg, pIter);
+ }
}
}
+ }else{
+ pLvl = &pStruct->aLevel[iLevel];
+ for(iSeg=nSeg-1; iSeg>=0; iSeg--){
+ fts5SegIterInit(p, &pLvl->aSeg[iSeg], &pNew->aSeg[iIter++]);
+ }
}
- }else{
- pLvl = &pStruct->aLevel[iLevel];
- for(iSeg=nSeg-1; iSeg>=0; iSeg--){
- fts5SegIterInit(p, &pLvl->aSeg[iSeg], &pNew->aSeg[iIter++]);
- }
+ assert( iIter==nSeg );
}
- assert( iIter==nSeg );
/* If the above was successful, each component iterators now points
** to the first entry in its segment. In this case initialize the
for(iIter=pNew->nSeg-1; iIter>0; iIter--){
int iEq;
if( (iEq = fts5MultiIterDoCompare(pNew, iIter)) ){
- fts5SegIterNext(p, &pNew->aSeg[iEq], 0);
+ Fts5SegIter *pSeg = &pNew->aSeg[iEq];
+ if( p->rc==SQLITE_OK ) pSeg->xNext(p, pSeg, 0);
fts5MultiIterAdvanced(p, pNew, iEq, iIter);
}
}
if( pNew->bSkipEmpty && fts5MultiIterIsEmpty(p, pNew) ){
fts5MultiIterNext(p, pNew, 0, 0);
+ }else if( pNew->base.bEof==0 ){
+ Fts5SegIter *pSeg = &pNew->aSeg[pNew->aFirst[1].iFirst];
+ pNew->xSetOutputs(pNew, pSeg);
}
+
}else{
- fts5MultiIterFree(p, pNew);
+ fts5MultiIterFree(pNew);
*ppOut = 0;
}
- fts5BufferFree(&buf);
}
/*
-** Create an Fts5IndexIter that iterates through the doclist provided
+** Create an Fts5Iter that iterates through the doclist provided
** as the second argument.
*/
static void fts5MultiIterNew2(
Fts5Index *p, /* FTS5 backend to iterate within */
Fts5Data *pData, /* Doclist to iterate through */
int bDesc, /* True for descending rowid order */
- Fts5IndexIter **ppOut /* New object */
+ Fts5Iter **ppOut /* New object */
){
- Fts5IndexIter *pNew;
+ Fts5Iter *pNew;
pNew = fts5MultiIterAlloc(p, 2);
if( pNew ){
Fts5SegIter *pIter = &pNew->aSeg[1];
- pNew->bFiltered = 1;
pIter->flags = FTS5_SEGITER_ONETERM;
if( pData->szLeaf>0 ){
pIter->pLeaf = pData;
}
pData = 0;
}else{
- pNew->bEof = 1;
+ pNew->base.bEof = 1;
}
+ fts5SegIterSetNext(p, pIter);
*ppOut = pNew;
}
** Return true if the iterator is at EOF or if an error has occurred.
** False otherwise.
*/
-static int fts5MultiIterEof(Fts5Index *p, Fts5IndexIter *pIter){
+static int fts5MultiIterEof(Fts5Index *p, Fts5Iter *pIter){
assert( p->rc
- || (pIter->aSeg[ pIter->aFirst[1].iFirst ].pLeaf==0)==pIter->bEof
+ || (pIter->aSeg[ pIter->aFirst[1].iFirst ].pLeaf==0)==pIter->base.bEof
);
- return (p->rc || pIter->bEof);
+ return (p->rc || pIter->base.bEof);
}
/*
** to. If the iterator points to EOF when this function is called the
** results are undefined.
*/
-static i64 fts5MultiIterRowid(Fts5IndexIter *pIter){
+static i64 fts5MultiIterRowid(Fts5Iter *pIter){
assert( pIter->aSeg[ pIter->aFirst[1].iFirst ].pLeaf );
return pIter->aSeg[ pIter->aFirst[1].iFirst ].iRowid;
}
*/
static void fts5MultiIterNextFrom(
Fts5Index *p,
- Fts5IndexIter *pIter,
+ Fts5Iter *pIter,
i64 iMatch
){
while( 1 ){
** Return a pointer to a buffer containing the term associated with the
** entry that the iterator currently points to.
*/
-static const u8 *fts5MultiIterTerm(Fts5IndexIter *pIter, int *pn){
+static const u8 *fts5MultiIterTerm(Fts5Iter *pIter, int *pn){
Fts5SegIter *p = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
*pn = p->term.n;
return p->term.p;
}
-static void fts5ChunkIterate(
- Fts5Index *p, /* Index object */
- Fts5SegIter *pSeg, /* Poslist of this iterator */
- void *pCtx, /* Context pointer for xChunk callback */
- void (*xChunk)(Fts5Index*, void*, const u8*, int)
-){
- int nRem = pSeg->nPos; /* Number of bytes still to come */
- Fts5Data *pData = 0;
- u8 *pChunk = &pSeg->pLeaf->p[pSeg->iLeafOffset];
- int nChunk = MIN(nRem, pSeg->pLeaf->szLeaf - pSeg->iLeafOffset);
- int pgno = pSeg->iLeafPgno;
- int pgnoSave = 0;
-
- if( (pSeg->flags & FTS5_SEGITER_REVERSE)==0 ){
- pgnoSave = pgno+1;
- }
-
- while( 1 ){
- xChunk(p, pCtx, pChunk, nChunk);
- nRem -= nChunk;
- fts5DataRelease(pData);
- if( nRem<=0 ){
- break;
- }else{
- pgno++;
- pData = fts5DataRead(p, FTS5_SEGMENT_ROWID(pSeg->pSeg->iSegid, pgno));
- if( pData==0 ) break;
- pChunk = &pData->p[4];
- nChunk = MIN(nRem, pData->szLeaf - 4);
- if( pgno==pgnoSave ){
- assert( pSeg->pNextLeaf==0 );
- pSeg->pNextLeaf = pData;
- pData = 0;
- }
- }
- }
-}
-
-
-
/*
** Allocate a new segment-id for the structure pStruct. The new segment
** id must be between 1 and 65335 inclusive, and must not be used by
if( pStruct->nSegment>=FTS5_MAX_SEGMENT ){
p->rc = SQLITE_FULL;
}else{
- while( iSegid==0 ){
- int iLvl, iSeg;
- sqlite3_randomness(sizeof(u32), (void*)&iSegid);
- iSegid = iSegid & ((1 << FTS5_DATA_ID_B)-1);
- for(iLvl=0; iLvl<pStruct->nLevel; iLvl++){
- for(iSeg=0; iSeg<pStruct->aLevel[iLvl].nSeg; iSeg++){
- if( iSegid==pStruct->aLevel[iLvl].aSeg[iSeg].iSegid ){
- iSegid = 0;
- }
+ /* FTS5_MAX_SEGMENT is currently defined as 2000. So the following
+ ** array is 63 elements, or 252 bytes, in size. */
+ u32 aUsed[(FTS5_MAX_SEGMENT+31) / 32];
+ int iLvl, iSeg;
+ int i;
+ u32 mask;
+ memset(aUsed, 0, sizeof(aUsed));
+ for(iLvl=0; iLvl<pStruct->nLevel; iLvl++){
+ for(iSeg=0; iSeg<pStruct->aLevel[iLvl].nSeg; iSeg++){
+ int iId = pStruct->aLevel[iLvl].aSeg[iSeg].iSegid;
+ if( iId<=FTS5_MAX_SEGMENT ){
+ aUsed[(iId-1) / 32] |= 1 << ((iId-1) % 32);
}
}
}
+
+ for(i=0; aUsed[i]==0xFFFFFFFF; i++);
+ mask = aUsed[i];
+ for(iSegid=0; mask & (1 << iSegid); iSegid++);
+ iSegid += 1 + i*32;
+
+#ifdef SQLITE_DEBUG
+ for(iLvl=0; iLvl<pStruct->nLevel; iLvl++){
+ for(iSeg=0; iSeg<pStruct->aLevel[iLvl].nSeg; iSeg++){
+ assert( iSegid!=pStruct->aLevel[iLvl].aSeg[iSeg].iSegid );
+ }
+ }
+ assert( iSegid>0 && iSegid<=FTS5_MAX_SEGMENT );
+
+ {
+ sqlite3_stmt *pIdxSelect = fts5IdxSelectStmt(p);
+ if( p->rc==SQLITE_OK ){
+ u8 aBlob[2] = {0xff, 0xff};
+ sqlite3_bind_int(pIdxSelect, 1, iSegid);
+ sqlite3_bind_blob(pIdxSelect, 2, aBlob, 2, SQLITE_STATIC);
+ assert( sqlite3_step(pIdxSelect)!=SQLITE_ROW );
+ p->rc = sqlite3_reset(pIdxSelect);
+ sqlite3_bind_null(pIdxSelect, 2);
+ }
+ }
+#endif
}
}
}
/*
-** Return the size of the prefix, in bytes, that buffer (nNew/pNew) shares
-** with buffer (nOld/pOld).
+** Return the size of the prefix, in bytes, that buffer
+** (pNew/<length-unknown>) shares with buffer (pOld/nOld).
+**
+** Buffer (pNew/<length-unknown>) is guaranteed to be greater
+** than buffer (pOld/nOld).
*/
-static int fts5PrefixCompress(
- int nOld, const u8 *pOld,
- int nNew, const u8 *pNew
-){
+static int fts5PrefixCompress(int nOld, const u8 *pOld, const u8 *pNew){
int i;
- assert( fts5BlobCompare(pOld, nOld, pNew, nNew)<0 );
for(i=0; i<nOld; i++){
if( pOld[i]!=pNew[i] ) break;
}
sqlite3_bind_int64(p->pIdxWriter, 3, bFlag + ((i64)pWriter->iBtPage<<1));
sqlite3_step(p->pIdxWriter);
p->rc = sqlite3_reset(p->pIdxWriter);
+ sqlite3_bind_null(p->pIdxWriter, 2);
}
pWriter->iBtPage = 0;
}
/* Set the szLeaf header field. */
assert( 0==fts5GetU16(&pPage->buf.p[2]) );
- fts5PutU16(&pPage->buf.p[2], pPage->buf.n);
+ fts5PutU16(&pPage->buf.p[2], (u16)pPage->buf.n);
if( pWriter->bFirstTermInPage ){
/* No term was written to this page. */
** inefficient, but still correct. */
int n = nTerm;
if( pPage->term.n ){
- n = 1 + fts5PrefixCompress(pPage->term.n, pPage->term.p, nTerm, pTerm);
+ n = 1 + fts5PrefixCompress(pPage->term.n, pPage->term.p, pTerm);
}
fts5WriteBtreeTerm(p, pWriter, n, pTerm);
pPage = &pWriter->writer;
}
}else{
- nPrefix = fts5PrefixCompress(pPage->term.n, pPage->term.p, nTerm, pTerm);
+ nPrefix = fts5PrefixCompress(pPage->term.n, pPage->term.p, pTerm);
fts5BufferAppendVarint(&p->rc, &pPage->buf, nPrefix);
}
static void fts5WriteAppendRowid(
Fts5Index *p,
Fts5SegWriter *pWriter,
- i64 iRowid,
- int nPos
+ i64 iRowid
){
if( p->rc==SQLITE_OK ){
Fts5PageWriter *pPage = &pWriter->writer;
** rowid-pointer in the page-header. Also append a value to the dlidx
** buffer, in case a doclist-index is required. */
if( pWriter->bFirstRowidInPage ){
- fts5PutU16(pPage->buf.p, pPage->buf.n);
+ fts5PutU16(pPage->buf.p, (u16)pPage->buf.n);
fts5WriteDlidxAppend(p, pWriter, iRowid);
}
pWriter->iPrevRowid = iRowid;
pWriter->bFirstRowidInDoclist = 0;
pWriter->bFirstRowidInPage = 0;
-
- fts5BufferAppendVarint(&p->rc, &pPage->buf, nPos);
}
}
fts5WriteFlushLeaf(p, pWriter);
}
*pnLeaf = pLeaf->pgno-1;
- fts5WriteFlushBtree(p, pWriter);
+ if( pLeaf->pgno>1 ){
+ fts5WriteFlushBtree(p, pWriter);
+ }
}
fts5BufferFree(&pLeaf->term);
fts5BufferFree(&pLeaf->buf);
pWriter->bFirstTermInPage = 1;
pWriter->iBtPage = 1;
+ assert( pWriter->writer.buf.n==0 );
+ assert( pWriter->writer.pgidx.n==0 );
+
/* Grow the two buffers to pgsz + padding bytes in size. */
- fts5BufferGrow(&p->rc, &pWriter->writer.pgidx, nBuffer);
- fts5BufferGrow(&p->rc, &pWriter->writer.buf, nBuffer);
+ sqlite3Fts5BufferSize(&p->rc, &pWriter->writer.pgidx, nBuffer);
+ sqlite3Fts5BufferSize(&p->rc, &pWriter->writer.buf, nBuffer);
if( p->pIdxWriter==0 ){
Fts5Config *pConfig = p->pConfig;
** incremental merge operation. This function is called if the incremental
** merge step has finished but the input has not been completely exhausted.
*/
-static void fts5TrimSegments(Fts5Index *p, Fts5IndexIter *pIter){
+static void fts5TrimSegments(Fts5Index *p, Fts5Iter *pIter){
int i;
Fts5Buffer buf;
memset(&buf, 0, sizeof(Fts5Buffer));
fts5BufferAppendBlob(&p->rc, &buf, pData->szLeaf-iOff, &pData->p[iOff]);
if( p->rc==SQLITE_OK ){
/* Set the szLeaf field */
- fts5PutU16(&buf.p[2], buf.n);
+ fts5PutU16(&buf.p[2], (u16)buf.n);
}
/* Set up the new page-index array */
Fts5Structure *pStruct = *ppStruct;
Fts5StructureLevel *pLvl = &pStruct->aLevel[iLvl];
Fts5StructureLevel *pLvlOut;
- Fts5IndexIter *pIter = 0; /* Iterator to read input data */
+ Fts5Iter *pIter = 0; /* Iterator to read input data */
int nRem = pnRem ? *pnRem : 0; /* Output leaf pages left to write */
int nInput; /* Number of input segments */
Fts5SegWriter writer; /* Writer object */
Fts5StructureSegment *pSeg; /* Output segment */
Fts5Buffer term;
int bOldest; /* True if the output segment is the oldest */
+ int eDetail = p->pConfig->eDetail;
+ const int flags = FTS5INDEX_QUERY_NOOUTPUT;
+ int bTermWritten = 0; /* True if current term already output */
assert( iLvl<pStruct->nLevel );
assert( pLvl->nMerge<=pLvl->nSeg );
bOldest = (pLvlOut->nSeg==1 && pStruct->nLevel==iLvl+2);
assert( iLvl>=0 );
- for(fts5MultiIterNew(p, pStruct, 0, 0, 0, 0, iLvl, nInput, &pIter);
+ for(fts5MultiIterNew(p, pStruct, flags, 0, 0, 0, iLvl, nInput, &pIter);
fts5MultiIterEof(p, pIter)==0;
fts5MultiIterNext(p, pIter, 0, 0)
){
int nTerm;
const u8 *pTerm;
- /* Check for key annihilation. */
- if( pSegIter->nPos==0 && (bOldest || pSegIter->bDel==0) ) continue;
-
pTerm = fts5MultiIterTerm(pIter, &nTerm);
if( nTerm!=term.n || memcmp(pTerm, term.p, nTerm) ){
if( pnRem && writer.nLeafWritten>nRem ){
break;
}
+ fts5BufferSet(&p->rc, &term, nTerm, pTerm);
+ bTermWritten =0;
+ }
+
+ /* Check for key annihilation. */
+ if( pSegIter->nPos==0 && (bOldest || pSegIter->bDel==0) ) continue;
+ if( p->rc==SQLITE_OK && bTermWritten==0 ){
/* This is a new term. Append a term to the output segment. */
fts5WriteAppendTerm(p, &writer, nTerm, pTerm);
- fts5BufferSet(&p->rc, &term, nTerm, pTerm);
+ bTermWritten = 1;
}
/* Append the rowid to the output */
/* WRITEPOSLISTSIZE */
- nPos = pSegIter->nPos*2 + pSegIter->bDel;
- fts5WriteAppendRowid(p, &writer, fts5MultiIterRowid(pIter), nPos);
+ fts5WriteAppendRowid(p, &writer, fts5MultiIterRowid(pIter));
- /* Append the position-list data to the output */
- fts5ChunkIterate(p, pSegIter, (void*)&writer, fts5MergeChunkCallback);
+ if( eDetail==FTS5_DETAIL_NONE ){
+ if( pSegIter->bDel ){
+ fts5BufferAppendVarint(&p->rc, &writer.writer.buf, 0);
+ if( pSegIter->nPos>0 ){
+ fts5BufferAppendVarint(&p->rc, &writer.writer.buf, 0);
+ }
+ }
+ }else{
+ /* Append the position-list data to the output */
+ nPos = pSegIter->nPos*2 + pSegIter->bDel;
+ fts5BufferAppendVarint(&p->rc, &writer.writer.buf, nPos);
+ fts5ChunkIterate(p, pSegIter, (void*)&writer, fts5MergeChunkCallback);
+ }
}
/* Flush the last leaf page to disk. Set the output segment b-tree height
pLvl->nMerge = nInput;
}
- fts5MultiIterFree(p, pIter);
+ fts5MultiIterFree(pIter);
fts5BufferFree(&term);
if( pnRem ) *pnRem -= writer.nLeafWritten;
}
/*
** Do up to nPg pages of automerge work on the index.
+**
+** Return true if any changes were actually made, or false otherwise.
*/
-static void fts5IndexMerge(
+static int fts5IndexMerge(
Fts5Index *p, /* FTS5 backend object */
Fts5Structure **ppStruct, /* IN/OUT: Current structure of index */
- int nPg /* Pages of work to do */
+ int nPg, /* Pages of work to do */
+ int nMin /* Minimum number of segments to merge */
){
int nRem = nPg;
+ int bRet = 0;
Fts5Structure *pStruct = *ppStruct;
while( nRem>0 && p->rc==SQLITE_OK ){
int iLvl; /* To iterate through levels */
}
#endif
- if( nBest<p->pConfig->nAutomerge
- && pStruct->aLevel[iBestLvl].nMerge==0
- ){
+ if( nBest<nMin && pStruct->aLevel[iBestLvl].nMerge==0 ){
break;
}
+ bRet = 1;
fts5IndexMergeLevel(p, &pStruct, iBestLvl, &nRem);
if( p->rc==SQLITE_OK && pStruct->aLevel[iBestLvl].nMerge==0 ){
fts5StructurePromote(p, iBestLvl+1, pStruct);
}
}
*ppStruct = pStruct;
+ return bRet;
}
/*
pStruct->nWriteCounter += nLeaf;
nRem = (int)(p->nWorkUnit * nWork * pStruct->nLevel);
- fts5IndexMerge(p, ppStruct, nRem);
+ fts5IndexMerge(p, ppStruct, nRem, p->pConfig->nAutomerge);
}
}
return ret;
}
-#define fts5BufferSafeAppendBlob(pBuf, pBlob, nBlob) { \
- assert( (pBuf)->nSpace>=((pBuf)->n+nBlob) ); \
- memcpy(&(pBuf)->p[(pBuf)->n], pBlob, nBlob); \
- (pBuf)->n += nBlob; \
-}
-
-#define fts5BufferSafeAppendVarint(pBuf, iVal) { \
- (pBuf)->n += sqlite3Fts5PutVarint(&(pBuf)->p[(pBuf)->n], (iVal)); \
- assert( (pBuf)->nSpace>=(pBuf)->n ); \
-}
-
/*
** Flush the contents of in-memory hash table iHash to a new level-0
** segment on disk. Also update the corresponding structure record.
** for the new level-0 segment. */
pStruct = fts5StructureRead(p);
iSegid = fts5AllocateSegid(p, pStruct);
+ fts5StructureInvalidate(p);
if( iSegid ){
const int pgsz = p->pConfig->pgsz;
-
+ int eDetail = p->pConfig->eDetail;
Fts5StructureSegment *pSeg; /* New segment within pStruct */
Fts5Buffer *pBuf; /* Buffer in which to assemble leaf page */
Fts5Buffer *pPgidx; /* Buffer in which to assemble pgidx */
/* Write the term for this entry to disk. */
sqlite3Fts5HashScanEntry(pHash, &zTerm, &pDoclist, &nDoclist);
- fts5WriteAppendTerm(p, &writer, strlen(zTerm), (const u8*)zTerm);
+ fts5WriteAppendTerm(p, &writer, (int)strlen(zTerm), (const u8*)zTerm);
assert( writer.bFirstRowidInPage==0 );
if( pgsz>=(pBuf->n + pPgidx->n + nDoclist + 1) ){
** loop iterates through the poslists that make up the current
** doclist. */
while( p->rc==SQLITE_OK && iOff<nDoclist ){
- int nPos;
- int nCopy;
- int bDummy;
iOff += fts5GetVarint(&pDoclist[iOff], (u64*)&iDelta);
- nCopy = fts5GetPoslistSize(&pDoclist[iOff], &nPos, &bDummy);
- nCopy += nPos;
iRowid += iDelta;
if( writer.bFirstRowidInPage ){
- fts5PutU16(&pBuf->p[0], pBuf->n); /* first rowid on page */
+ fts5PutU16(&pBuf->p[0], (u16)pBuf->n); /* first rowid on page */
pBuf->n += sqlite3Fts5PutVarint(&pBuf->p[pBuf->n], iRowid);
writer.bFirstRowidInPage = 0;
fts5WriteDlidxAppend(p, &writer, iRowid);
}
assert( pBuf->n<=pBuf->nSpace );
- if( (pBuf->n + pPgidx->n + nCopy) <= pgsz ){
- /* The entire poslist will fit on the current leaf. So copy
- ** it in one go. */
- fts5BufferSafeAppendBlob(pBuf, &pDoclist[iOff], nCopy);
- }else{
- /* The entire poslist will not fit on this leaf. So it needs
- ** to be broken into sections. The only qualification being
- ** that each varint must be stored contiguously. */
- const u8 *pPoslist = &pDoclist[iOff];
- int iPos = 0;
- while( p->rc==SQLITE_OK ){
- int nSpace = pgsz - pBuf->n - pPgidx->n;
- int n = 0;
- if( (nCopy - iPos)<=nSpace ){
- n = nCopy - iPos;
- }else{
- n = fts5PoslistPrefix(&pPoslist[iPos], nSpace);
+ if( eDetail==FTS5_DETAIL_NONE ){
+ if( iOff<nDoclist && pDoclist[iOff]==0 ){
+ pBuf->p[pBuf->n++] = 0;
+ iOff++;
+ if( iOff<nDoclist && pDoclist[iOff]==0 ){
+ pBuf->p[pBuf->n++] = 0;
+ iOff++;
}
- assert( n>0 );
- fts5BufferSafeAppendBlob(pBuf, &pPoslist[iPos], n);
- iPos += n;
- if( (pBuf->n + pPgidx->n)>=pgsz ){
- fts5WriteFlushLeaf(p, &writer);
+ }
+ if( (pBuf->n + pPgidx->n)>=pgsz ){
+ fts5WriteFlushLeaf(p, &writer);
+ }
+ }else{
+ int bDummy;
+ int nPos;
+ int nCopy = fts5GetPoslistSize(&pDoclist[iOff], &nPos, &bDummy);
+ nCopy += nPos;
+ if( (pBuf->n + pPgidx->n + nCopy) <= pgsz ){
+ /* The entire poslist will fit on the current leaf. So copy
+ ** it in one go. */
+ fts5BufferSafeAppendBlob(pBuf, &pDoclist[iOff], nCopy);
+ }else{
+ /* The entire poslist will not fit on this leaf. So it needs
+ ** to be broken into sections. The only qualification being
+ ** that each varint must be stored contiguously. */
+ const u8 *pPoslist = &pDoclist[iOff];
+ int iPos = 0;
+ while( p->rc==SQLITE_OK ){
+ int nSpace = pgsz - pBuf->n - pPgidx->n;
+ int n = 0;
+ if( (nCopy - iPos)<=nSpace ){
+ n = nCopy - iPos;
+ }else{
+ n = fts5PoslistPrefix(&pPoslist[iPos], nSpace);
+ }
+ assert( n>0 );
+ fts5BufferSafeAppendBlob(pBuf, &pPoslist[iPos], n);
+ iPos += n;
+ if( (pBuf->n + pPgidx->n)>=pgsz ){
+ fts5WriteFlushLeaf(p, &writer);
+ }
+ if( iPos>=nCopy ) break;
}
- if( iPos>=nCopy ) break;
}
+ iOff += nCopy;
}
- iOff += nCopy;
}
}
}
}
-
-static int sqlite3Fts5IndexOptimize(Fts5Index *p){
- Fts5Structure *pStruct;
+static Fts5Structure *fts5IndexOptimizeStruct(
+ Fts5Index *p,
+ Fts5Structure *pStruct
+){
Fts5Structure *pNew = 0;
- int nSeg = 0;
-
- assert( p->rc==SQLITE_OK );
- fts5IndexFlush(p);
- pStruct = fts5StructureRead(p);
+ int nByte = sizeof(Fts5Structure);
+ int nSeg = pStruct->nSegment;
+ int i;
- if( pStruct ){
- assert( pStruct->nSegment==fts5StructureCountSegments(pStruct) );
- nSeg = pStruct->nSegment;
- if( nSeg>1 ){
- int nByte = sizeof(Fts5Structure);
- nByte += (pStruct->nLevel+1) * sizeof(Fts5StructureLevel);
- pNew = (Fts5Structure*)sqlite3Fts5MallocZero(&p->rc, nByte);
+ /* Figure out if this structure requires optimization. A structure does
+ ** not require optimization if either:
+ **
+ ** + it consists of fewer than two segments, or
+ ** + all segments are on the same level, or
+ ** + all segments except one are currently inputs to a merge operation.
+ **
+ ** In the first case, return NULL. In the second, increment the ref-count
+ ** on *pStruct and return a copy of the pointer to it.
+ */
+ if( nSeg<2 ) return 0;
+ for(i=0; i<pStruct->nLevel; i++){
+ int nThis = pStruct->aLevel[i].nSeg;
+ if( nThis==nSeg || (nThis==nSeg-1 && pStruct->aLevel[i].nMerge==nThis) ){
+ fts5StructureRef(pStruct);
+ return pStruct;
}
+ assert( pStruct->aLevel[i].nMerge<=nThis );
}
+
+ nByte += (pStruct->nLevel+1) * sizeof(Fts5StructureLevel);
+ pNew = (Fts5Structure*)sqlite3Fts5MallocZero(&p->rc, nByte);
+
if( pNew ){
Fts5StructureLevel *pLvl;
- int nByte = nSeg * sizeof(Fts5StructureSegment);
+ nByte = nSeg * sizeof(Fts5StructureSegment);
pNew->nLevel = pStruct->nLevel+1;
pNew->nRef = 1;
pNew->nWriteCounter = pStruct->nWriteCounter;
if( pLvl->aSeg ){
int iLvl, iSeg;
int iSegOut = 0;
- for(iLvl=0; iLvl<pStruct->nLevel; iLvl++){
+ /* Iterate through all segments, from oldest to newest. Add them to
+ ** the new Fts5Level object so that pLvl->aSeg[0] is the oldest
+ ** segment in the data structure. */
+ for(iLvl=pStruct->nLevel-1; iLvl>=0; iLvl--){
for(iSeg=0; iSeg<pStruct->aLevel[iLvl].nSeg; iSeg++){
pLvl->aSeg[iSegOut] = pStruct->aLevel[iLvl].aSeg[iSeg];
iSegOut++;
}
}
+ return pNew;
+}
+
+static int sqlite3Fts5IndexOptimize(Fts5Index *p){
+ Fts5Structure *pStruct;
+ Fts5Structure *pNew = 0;
+
+ assert( p->rc==SQLITE_OK );
+ fts5IndexFlush(p);
+ pStruct = fts5StructureRead(p);
+ fts5StructureInvalidate(p);
+
+ if( pStruct ){
+ pNew = fts5IndexOptimizeStruct(p, pStruct);
+ }
+ fts5StructureRelease(pStruct);
+
+ assert( pNew==0 || pNew->nSegment>0 );
if( pNew ){
- int iLvl = pNew->nLevel-1;
+ int iLvl;
+ for(iLvl=0; pNew->aLevel[iLvl].nSeg==0; iLvl++){}
while( p->rc==SQLITE_OK && pNew->aLevel[iLvl].nSeg>0 ){
int nRem = FTS5_OPT_WORK_UNIT;
fts5IndexMergeLevel(p, &pNew, iLvl, &nRem);
fts5StructureRelease(pNew);
}
- fts5StructureRelease(pStruct);
return fts5IndexReturn(p);
}
-static int sqlite3Fts5IndexMerge(Fts5Index *p, int nMerge){
- Fts5Structure *pStruct;
-
- pStruct = fts5StructureRead(p);
- if( pStruct && pStruct->nLevel ){
- fts5IndexMerge(p, &pStruct, nMerge);
- fts5StructureWrite(p, pStruct);
- }
- fts5StructureRelease(pStruct);
-
- return fts5IndexReturn(p);
-}
-
-static void fts5PoslistCallback(
- Fts5Index *p,
- void *pContext,
- const u8 *pChunk, int nChunk
-){
- assert_nc( nChunk>=0 );
- if( nChunk>0 ){
- fts5BufferSafeAppendBlob((Fts5Buffer*)pContext, pChunk, nChunk);
- }
-}
-
-typedef struct PoslistCallbackCtx PoslistCallbackCtx;
-struct PoslistCallbackCtx {
- Fts5Buffer *pBuf; /* Append to this buffer */
- Fts5Colset *pColset; /* Restrict matches to this column */
- int eState; /* See above */
-};
-
/*
-** TODO: Make this more efficient!
+** This is called to implement the special "VALUES('merge', $nMerge)"
+** INSERT command.
*/
-static int fts5IndexColsetTest(Fts5Colset *pColset, int iCol){
- int i;
- for(i=0; i<pColset->nCol; i++){
- if( pColset->aiCol[i]==iCol ) return 1;
- }
- return 0;
-}
-
-static void fts5PoslistFilterCallback(
- Fts5Index *p,
- void *pContext,
- const u8 *pChunk, int nChunk
-){
- PoslistCallbackCtx *pCtx = (PoslistCallbackCtx*)pContext;
- assert_nc( nChunk>=0 );
- if( nChunk>0 ){
- /* Search through to find the first varint with value 1. This is the
- ** start of the next columns hits. */
- int i = 0;
- int iStart = 0;
-
- if( pCtx->eState==2 ){
- int iCol;
- fts5FastGetVarint32(pChunk, i, iCol);
- if( fts5IndexColsetTest(pCtx->pColset, iCol) ){
- pCtx->eState = 1;
- fts5BufferSafeAppendVarint(pCtx->pBuf, 1);
- }else{
- pCtx->eState = 0;
- }
+static int sqlite3Fts5IndexMerge(Fts5Index *p, int nMerge){
+ Fts5Structure *pStruct = fts5StructureRead(p);
+ if( pStruct ){
+ int nMin = p->pConfig->nUsermerge;
+ fts5StructureInvalidate(p);
+ if( nMerge<0 ){
+ Fts5Structure *pNew = fts5IndexOptimizeStruct(p, pStruct);
+ fts5StructureRelease(pStruct);
+ pStruct = pNew;
+ nMin = 2;
+ nMerge = nMerge*-1;
}
-
- do {
- while( i<nChunk && pChunk[i]!=0x01 ){
- while( pChunk[i] & 0x80 ) i++;
- i++;
- }
- if( pCtx->eState ){
- fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
- }
- if( i<nChunk ){
- int iCol;
- iStart = i;
- i++;
- if( i>=nChunk ){
- pCtx->eState = 2;
- }else{
- fts5FastGetVarint32(pChunk, i, iCol);
- pCtx->eState = fts5IndexColsetTest(pCtx->pColset, iCol);
- if( pCtx->eState ){
- fts5BufferSafeAppendBlob(pCtx->pBuf, &pChunk[iStart], i-iStart);
- iStart = i;
- }
- }
+ if( pStruct && pStruct->nLevel ){
+ if( fts5IndexMerge(p, &pStruct, nMerge, nMin) ){
+ fts5StructureWrite(p, pStruct);
}
- }while( i<nChunk );
+ }
+ fts5StructureRelease(pStruct);
}
+ return fts5IndexReturn(p);
}
-/*
-** Iterator pIter currently points to a valid entry (not EOF). This
-** function appends the position list data for the current entry to
-** buffer pBuf. It does not make a copy of the position-list size
-** field.
-*/
-static void fts5SegiterPoslist(
+static void fts5AppendRowid(
Fts5Index *p,
- Fts5SegIter *pSeg,
- Fts5Colset *pColset,
+ i64 iDelta,
+ Fts5Iter *pUnused,
Fts5Buffer *pBuf
){
- if( 0==fts5BufferGrow(&p->rc, pBuf, pSeg->nPos) ){
- if( pColset==0 ){
- fts5ChunkIterate(p, pSeg, (void*)pBuf, fts5PoslistCallback);
- }else{
- PoslistCallbackCtx sCtx;
- sCtx.pBuf = pBuf;
- sCtx.pColset = pColset;
- sCtx.eState = pColset ? fts5IndexColsetTest(pColset, 0) : 1;
- assert( sCtx.eState==0 || sCtx.eState==1 );
- fts5ChunkIterate(p, pSeg, (void*)&sCtx, fts5PoslistFilterCallback);
- }
- }
+ UNUSED_PARAM(pUnused);
+ fts5BufferAppendVarint(&p->rc, pBuf, iDelta);
}
-/*
-** IN/OUT parameter (*pa) points to a position list n bytes in size. If
-** the position list contains entries for column iCol, then (*pa) is set
-** to point to the sub-position-list for that column and the number of
-** bytes in it returned. Or, if the argument position list does not
-** contain any entries for column iCol, return 0.
-*/
-static int fts5IndexExtractCol(
- const u8 **pa, /* IN/OUT: Pointer to poslist */
- int n, /* IN: Size of poslist in bytes */
- int iCol /* Column to extract from poslist */
-){
- int iCurrent = 0; /* Anything before the first 0x01 is col 0 */
- const u8 *p = *pa;
- const u8 *pEnd = &p[n]; /* One byte past end of position list */
- u8 prev = 0;
-
- while( iCol!=iCurrent ){
- /* Advance pointer p until it points to pEnd or an 0x01 byte that is
- ** not part of a varint */
- while( (prev & 0x80) || *p!=0x01 ){
- prev = *p++;
- if( p==pEnd ) return 0;
- }
- *pa = p++;
- p += fts5GetVarint32(p, iCurrent);
- }
-
- /* Advance pointer p until it points to pEnd or an 0x01 byte that is
- ** not part of a varint */
- assert( (prev & 0x80)==0 );
- while( p<pEnd && ((prev & 0x80) || *p!=0x01) ){
- prev = *p++;
- }
- return p - (*pa);
-}
-
-
-/*
-** Iterator pMulti currently points to a valid entry (not EOF). This
-** function appends the following to buffer pBuf:
-**
-** * The varint iDelta, and
-** * the position list that currently points to, including the size field.
-**
-** If argument pColset is NULL, then the position list is filtered according
-** to pColset before being appended to the buffer. If this means there are
-** no entries in the position list, nothing is appended to the buffer (not
-** even iDelta).
-**
-** If an error occurs, an error code is left in p->rc.
-*/
-static int fts5AppendPoslist(
+static void fts5AppendPoslist(
Fts5Index *p,
i64 iDelta,
- Fts5IndexIter *pMulti,
- Fts5Colset *pColset,
+ Fts5Iter *pMulti,
Fts5Buffer *pBuf
){
- if( p->rc==SQLITE_OK ){
- Fts5SegIter *pSeg = &pMulti->aSeg[ pMulti->aFirst[1].iFirst ];
- assert( fts5MultiIterEof(p, pMulti)==0 );
- assert( pSeg->nPos>0 );
- if( 0==fts5BufferGrow(&p->rc, pBuf, pSeg->nPos+9+9) ){
- int iSv1;
- int iSv2;
- int iData;
-
- /* Append iDelta */
- iSv1 = pBuf->n;
- fts5BufferSafeAppendVarint(pBuf, iDelta);
-
- /* WRITEPOSLISTSIZE */
- iSv2 = pBuf->n;
- fts5BufferSafeAppendVarint(pBuf, pSeg->nPos*2);
- iData = pBuf->n;
-
- if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf
- && (pColset==0 || pColset->nCol==1)
- ){
- const u8 *pPos = &pSeg->pLeaf->p[pSeg->iLeafOffset];
- int nPos;
- if( pColset ){
- nPos = fts5IndexExtractCol(&pPos, pSeg->nPos, pColset->aiCol[0]);
- }else{
- nPos = pSeg->nPos;
- }
- fts5BufferSafeAppendBlob(pBuf, pPos, nPos);
- }else{
- fts5SegiterPoslist(p, pSeg, pColset, pBuf);
- }
-
- if( pColset ){
- int nActual = pBuf->n - iData;
- if( nActual!=pSeg->nPos ){
- if( nActual==0 ){
- pBuf->n = iSv1;
- return 1;
- }else{
- int nReq = sqlite3Fts5GetVarintLen((u32)(nActual*2));
- while( iSv2<(iData-nReq) ){ pBuf->p[iSv2++] = 0x80; }
- sqlite3Fts5PutVarint(&pBuf->p[iSv2], nActual*2);
- }
- }
- }
- }
+ int nData = pMulti->base.nData;
+ assert( nData>0 );
+ if( p->rc==SQLITE_OK && 0==fts5BufferGrow(&p->rc, pBuf, nData+9+9) ){
+ fts5BufferSafeAppendVarint(pBuf, iDelta);
+ fts5BufferSafeAppendVarint(pBuf, nData*2);
+ fts5BufferSafeAppendBlob(pBuf, pMulti->base.pData, nData);
}
-
- return 0;
}
+
static void fts5DoclistIterNext(Fts5DoclistIter *pIter){
u8 *p = pIter->aPoslist + pIter->nSize + pIter->nPoslist;
(iLastRowid) = (iRowid); \
}
+/*
+** Swap the contents of buffer *p1 with that of *p2.
+*/
+static void fts5BufferSwap(Fts5Buffer *p1, Fts5Buffer *p2){
+ Fts5Buffer tmp = *p1;
+ *p1 = *p2;
+ *p2 = tmp;
+}
+
+static void fts5NextRowid(Fts5Buffer *pBuf, int *piOff, i64 *piRowid){
+ int i = *piOff;
+ if( i>=pBuf->n ){
+ *piOff = -1;
+ }else{
+ u64 iVal;
+ *piOff = i + sqlite3Fts5GetVarint(&pBuf->p[i], &iVal);
+ *piRowid += iVal;
+ }
+}
+
+/*
+** This is the equivalent of fts5MergePrefixLists() for detail=none mode.
+** In this case the buffers consist of a delta-encoded list of rowids only.
+*/
+static void fts5MergeRowidLists(
+ Fts5Index *p, /* FTS5 backend object */
+ Fts5Buffer *p1, /* First list to merge */
+ Fts5Buffer *p2 /* Second list to merge */
+){
+ int i1 = 0;
+ int i2 = 0;
+ i64 iRowid1 = 0;
+ i64 iRowid2 = 0;
+ i64 iOut = 0;
+
+ Fts5Buffer out;
+ memset(&out, 0, sizeof(out));
+ sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n);
+ if( p->rc ) return;
+
+ fts5NextRowid(p1, &i1, &iRowid1);
+ fts5NextRowid(p2, &i2, &iRowid2);
+ while( i1>=0 || i2>=0 ){
+ if( i1>=0 && (i2<0 || iRowid1<iRowid2) ){
+ assert( iOut==0 || iRowid1>iOut );
+ fts5BufferSafeAppendVarint(&out, iRowid1 - iOut);
+ iOut = iRowid1;
+ fts5NextRowid(p1, &i1, &iRowid1);
+ }else{
+ assert( iOut==0 || iRowid2>iOut );
+ fts5BufferSafeAppendVarint(&out, iRowid2 - iOut);
+ iOut = iRowid2;
+ if( i1>=0 && iRowid1==iRowid2 ){
+ fts5NextRowid(p1, &i1, &iRowid1);
+ }
+ fts5NextRowid(p2, &i2, &iRowid2);
+ }
+ }
+
+ fts5BufferSwap(&out, p1);
+ fts5BufferFree(&out);
+}
+
/*
** Buffers p1 and p2 contain doclists. This function merges the content
** of the two doclists together and sets buffer p1 to the result before
i64 iLastRowid = 0;
Fts5DoclistIter i1;
Fts5DoclistIter i2;
- Fts5Buffer out;
- Fts5Buffer tmp;
- memset(&out, 0, sizeof(out));
- memset(&tmp, 0, sizeof(tmp));
-
- sqlite3Fts5BufferGrow(&p->rc, &out, p1->n + p2->n);
+ Fts5Buffer out = {0, 0, 0};
+ Fts5Buffer tmp = {0, 0, 0};
+
+ /* The maximum size of the output is equal to the sum of the two
+ ** input sizes + 1 varint (9 bytes). The extra varint is because if the
+ ** first rowid in one input is a large negative number, and the first in
+ ** the other a non-negative number, the delta for the non-negative
+ ** number will be larger on disk than the literal integer value
+ ** was. */
+ if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n + 9) ) return;
fts5DoclistIterInit(p1, &i1);
fts5DoclistIterInit(p2, &i2);
- while( p->rc==SQLITE_OK && (i1.aPoslist!=0 || i2.aPoslist!=0) ){
- if( i2.aPoslist==0 || (i1.aPoslist && i1.iRowid<i2.iRowid) ){
+
+ while( 1 ){
+ if( i1.iRowid<i2.iRowid ){
/* Copy entry from i1 */
fts5MergeAppendDocid(&out, iLastRowid, i1.iRowid);
fts5BufferSafeAppendBlob(&out, i1.aPoslist, i1.nPoslist+i1.nSize);
fts5DoclistIterNext(&i1);
+ if( i1.aPoslist==0 ) break;
}
- else if( i1.aPoslist==0 || i2.iRowid!=i1.iRowid ){
+ else if( i2.iRowid!=i1.iRowid ){
/* Copy entry from i2 */
fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.nPoslist+i2.nSize);
fts5DoclistIterNext(&i2);
+ if( i2.aPoslist==0 ) break;
}
else{
+ /* Merge the two position lists. */
i64 iPos1 = 0;
i64 iPos2 = 0;
int iOff1 = 0;
u8 *a1 = &i1.aPoslist[i1.nSize];
u8 *a2 = &i2.aPoslist[i2.nSize];
+ i64 iPrev = 0;
Fts5PoslistWriter writer;
memset(&writer, 0, sizeof(writer));
- /* Merge the two position lists. */
fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
fts5BufferZero(&tmp);
+ sqlite3Fts5BufferSize(&p->rc, &tmp, i1.nPoslist + i2.nPoslist);
+ if( p->rc ) break;
sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
+ assert( iPos1>=0 && iPos2>=0 );
- while( p->rc==SQLITE_OK && (iPos1>=0 || iPos2>=0) ){
- i64 iNew;
- if( iPos2<0 || (iPos1>=0 && iPos1<iPos2) ){
- iNew = iPos1;
- sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
- }else{
- iNew = iPos2;
- sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
- if( iPos1==iPos2 ){
- sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1,&iPos1);
+ if( iPos1<iPos2 ){
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
+ sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
+ }else{
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
+ sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
+ }
+
+ if( iPos1>=0 && iPos2>=0 ){
+ while( 1 ){
+ if( iPos1<iPos2 ){
+ if( iPos1!=iPrev ){
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
+ }
+ sqlite3Fts5PoslistNext64(a1, i1.nPoslist, &iOff1, &iPos1);
+ if( iPos1<0 ) break;
+ }else{
+ assert( iPos2!=iPrev );
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
+ sqlite3Fts5PoslistNext64(a2, i2.nPoslist, &iOff2, &iPos2);
+ if( iPos2<0 ) break;
}
}
- p->rc = sqlite3Fts5PoslistWriterAppend(&tmp, &writer, iNew);
+ }
+
+ if( iPos1>=0 ){
+ if( iPos1!=iPrev ){
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos1);
+ }
+ fts5BufferSafeAppendBlob(&tmp, &a1[iOff1], i1.nPoslist-iOff1);
+ }else{
+ assert( iPos2>=0 && iPos2!=iPrev );
+ sqlite3Fts5PoslistSafeAppend(&tmp, &iPrev, iPos2);
+ fts5BufferSafeAppendBlob(&tmp, &a2[iOff2], i2.nPoslist-iOff2);
}
/* WRITEPOSLISTSIZE */
fts5BufferSafeAppendBlob(&out, tmp.p, tmp.n);
fts5DoclistIterNext(&i1);
fts5DoclistIterNext(&i2);
+ if( i1.aPoslist==0 || i2.aPoslist==0 ) break;
}
}
+ if( i1.aPoslist ){
+ fts5MergeAppendDocid(&out, iLastRowid, i1.iRowid);
+ fts5BufferSafeAppendBlob(&out, i1.aPoslist, i1.aEof - i1.aPoslist);
+ }
+ else if( i2.aPoslist ){
+ fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid);
+ fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.aEof - i2.aPoslist);
+ }
+ assert( out.n<=(p1->n+p2->n+9) );
+
fts5BufferSet(&p->rc, p1, out.n, out.p);
fts5BufferFree(&tmp);
fts5BufferFree(&out);
}
}
-static void fts5BufferSwap(Fts5Buffer *p1, Fts5Buffer *p2){
- Fts5Buffer tmp = *p1;
- *p1 = *p2;
- *p2 = tmp;
-}
-
static void fts5SetupPrefixIter(
Fts5Index *p, /* Index to read from */
int bDesc, /* True for "ORDER BY rowid DESC" */
const u8 *pToken, /* Buffer containing prefix to match */
int nToken, /* Size of buffer pToken in bytes */
Fts5Colset *pColset, /* Restrict matches to these columns */
- Fts5IndexIter **ppIter /* OUT: New iterator */
+ Fts5Iter **ppIter /* OUT: New iterator */
){
Fts5Structure *pStruct;
Fts5Buffer *aBuf;
const int nBuf = 32;
+ void (*xMerge)(Fts5Index*, Fts5Buffer*, Fts5Buffer*);
+ void (*xAppend)(Fts5Index*, i64, Fts5Iter*, Fts5Buffer*);
+ if( p->pConfig->eDetail==FTS5_DETAIL_NONE ){
+ xMerge = fts5MergeRowidLists;
+ xAppend = fts5AppendRowid;
+ }else{
+ xMerge = fts5MergePrefixLists;
+ xAppend = fts5AppendPoslist;
+ }
+
aBuf = (Fts5Buffer*)fts5IdxMalloc(p, sizeof(Fts5Buffer)*nBuf);
pStruct = fts5StructureRead(p);
if( aBuf && pStruct ){
- const int flags = FTS5INDEX_QUERY_SCAN;
+ const int flags = FTS5INDEX_QUERY_SCAN
+ | FTS5INDEX_QUERY_SKIPEMPTY
+ | FTS5INDEX_QUERY_NOOUTPUT;
int i;
i64 iLastRowid = 0;
- Fts5IndexIter *p1 = 0; /* Iterator used to gather data from index */
+ Fts5Iter *p1 = 0; /* Iterator used to gather data from index */
Fts5Data *pData;
Fts5Buffer doclist;
+ int bNewTerm = 1;
memset(&doclist, 0, sizeof(doclist));
- for(fts5MultiIterNew(p, pStruct, 1, flags, pToken, nToken, -1, 0, &p1);
+ fts5MultiIterNew(p, pStruct, flags, pColset, pToken, nToken, -1, 0, &p1);
+ fts5IterSetOutputCb(&p->rc, p1);
+ for( /* no-op */ ;
fts5MultiIterEof(p, p1)==0;
- fts5MultiIterNext(p, p1, 0, 0)
+ fts5MultiIterNext2(p, p1, &bNewTerm)
){
- i64 iRowid = fts5MultiIterRowid(p1);
- int nTerm;
- const u8 *pTerm = fts5MultiIterTerm(p1, &nTerm);
+ Fts5SegIter *pSeg = &p1->aSeg[ p1->aFirst[1].iFirst ];
+ int nTerm = pSeg->term.n;
+ const u8 *pTerm = pSeg->term.p;
+ p1->xSetOutputs(p1, pSeg);
+
assert_nc( memcmp(pToken, pTerm, MIN(nToken, nTerm))<=0 );
- if( nTerm<nToken || memcmp(pToken, pTerm, nToken) ) break;
+ if( bNewTerm ){
+ if( nTerm<nToken || memcmp(pToken, pTerm, nToken) ) break;
+ }
+
+ if( p1->base.nData==0 ) continue;
- if( doclist.n>0 && iRowid<=iLastRowid ){
+ if( p1->base.iRowid<=iLastRowid && doclist.n>0 ){
for(i=0; p->rc==SQLITE_OK && doclist.n; i++){
assert( i<nBuf );
if( aBuf[i].n==0 ){
fts5BufferSwap(&doclist, &aBuf[i]);
fts5BufferZero(&doclist);
}else{
- fts5MergePrefixLists(p, &doclist, &aBuf[i]);
+ xMerge(p, &doclist, &aBuf[i]);
fts5BufferZero(&aBuf[i]);
}
}
iLastRowid = 0;
}
- if( !fts5AppendPoslist(p, iRowid-iLastRowid, p1, pColset, &doclist) ){
- iLastRowid = iRowid;
- }
+ xAppend(p, p1->base.iRowid-iLastRowid, p1, &doclist);
+ iLastRowid = p1->base.iRowid;
}
for(i=0; i<nBuf; i++){
if( p->rc==SQLITE_OK ){
- fts5MergePrefixLists(p, &doclist, &aBuf[i]);
+ xMerge(p, &doclist, &aBuf[i]);
}
fts5BufferFree(&aBuf[i]);
}
- fts5MultiIterFree(p, p1);
+ fts5MultiIterFree(p1);
pData = fts5IdxMalloc(p, sizeof(Fts5Data) + doclist.n);
if( pData ){
pData->p = (u8*)&pData[1];
pData->nn = pData->szLeaf = doclist.n;
- memcpy(pData->p, doclist.p, doclist.n);
+ if( doclist.n ) memcpy(pData->p, doclist.p, doclist.n);
fts5MultiIterNew2(p, pData, bDesc, ppIter);
}
fts5BufferFree(&doclist);
/* Allocate the hash table if it has not already been allocated */
if( p->pHash==0 ){
- p->rc = sqlite3Fts5HashNew(&p->pHash, &p->nPendingData);
+ p->rc = sqlite3Fts5HashNew(p->pConfig, &p->pHash, &p->nPendingData);
}
/* Flush the hash table to disk if required */
if( iRowid<p->iWriteRowid
|| (iRowid==p->iWriteRowid && p->bDelete==0)
- || (p->nPendingData > p->nMaxPendingData)
+ || (p->nPendingData > p->pConfig->nHashSize)
){
fts5IndexFlush(p);
}
/*
** Commit data to disk.
*/
-static int sqlite3Fts5IndexSync(Fts5Index *p, int bCommit){
+static int sqlite3Fts5IndexSync(Fts5Index *p){
assert( p->rc==SQLITE_OK );
fts5IndexFlush(p);
- if( bCommit ) fts5CloseReader(p);
+ fts5CloseReader(p);
return fts5IndexReturn(p);
}
static int sqlite3Fts5IndexRollback(Fts5Index *p){
fts5CloseReader(p);
fts5IndexDiscardData(p);
- assert( p->rc==SQLITE_OK );
+ fts5StructureInvalidate(p);
+ /* assert( p->rc==SQLITE_OK ); */
return SQLITE_OK;
}
*/
static int sqlite3Fts5IndexReinit(Fts5Index *p){
Fts5Structure s;
+ fts5StructureInvalidate(p);
memset(&s, 0, sizeof(Fts5Structure));
fts5DataWrite(p, FTS5_AVERAGES_ROWID, (const u8*)"", 0);
fts5StructureWrite(p, &s);
if( rc==SQLITE_OK ){
p->pConfig = pConfig;
p->nWorkUnit = FTS5_WORK_UNIT;
- p->nMaxPendingData = 1024*1024;
p->zDataTbl = sqlite3Fts5Mprintf(&rc, "%s_data", pConfig->zName);
if( p->zDataTbl && bCreate ){
rc = sqlite3Fts5CreateTable(
int rc = SQLITE_OK;
if( p ){
assert( p->pReader==0 );
+ fts5StructureInvalidate(p);
sqlite3_finalize(p->pWriter);
sqlite3_finalize(p->pDeleter);
sqlite3_finalize(p->pIdxWriter);
sqlite3_finalize(p->pIdxDeleter);
sqlite3_finalize(p->pIdxSelect);
+ sqlite3_finalize(p->pDataVersion);
sqlite3Fts5HashFree(p->pHash);
sqlite3_free(p->zDataTbl);
sqlite3_free(p);
** size. Return the number of bytes in the nChar character prefix of the
** buffer, or 0 if there are less than nChar characters in total.
*/
-static int fts5IndexCharlenToBytelen(const char *p, int nByte, int nChar){
+static int sqlite3Fts5IndexCharlenToBytelen(
+ const char *p,
+ int nByte,
+ int nChar
+){
int n = 0;
int i;
for(i=0; i<nChar; i++){
);
for(i=0; i<pConfig->nPrefix && rc==SQLITE_OK; i++){
- int nByte = fts5IndexCharlenToBytelen(pToken, nToken, pConfig->aPrefix[i]);
+ const int nChar = pConfig->aPrefix[i];
+ int nByte = sqlite3Fts5IndexCharlenToBytelen(pToken, nToken, nChar);
if( nByte ){
rc = sqlite3Fts5HashWrite(p->pHash,
- p->iWriteRowid, iCol, iPos, FTS5_MAIN_PREFIX+i+1, pToken, nByte
+ p->iWriteRowid, iCol, iPos, (char)(FTS5_MAIN_PREFIX+i+1), pToken,
+ nByte
);
}
}
Fts5IndexIter **ppIter /* OUT: New iterator object */
){
Fts5Config *pConfig = p->pConfig;
- Fts5IndexIter *pRet = 0;
- int iIdx = 0;
+ Fts5Iter *pRet = 0;
Fts5Buffer buf = {0, 0, 0};
/* If the QUERY_SCAN flag is set, all other flags must be clear. */
- assert( (flags & FTS5INDEX_QUERY_SCAN)==0
- || (flags & FTS5INDEX_QUERY_SCAN)==FTS5INDEX_QUERY_SCAN
- );
+ assert( (flags & FTS5INDEX_QUERY_SCAN)==0 || flags==FTS5INDEX_QUERY_SCAN );
- if( sqlite3Fts5BufferGrow(&p->rc, &buf, nToken+1)==0 ){
- memcpy(&buf.p[1], pToken, nToken);
+ if( sqlite3Fts5BufferSize(&p->rc, &buf, nToken+1)==0 ){
+ int iIdx = 0; /* Index to search */
+ if( nToken ) memcpy(&buf.p[1], pToken, nToken);
-#ifdef SQLITE_DEBUG
- /* If the QUERY_TEST_NOIDX flag was specified, then this must be a
+ /* Figure out which index to search and set iIdx accordingly. If this
+ ** is a prefix query for which there is no prefix index, set iIdx to
+ ** greater than pConfig->nPrefix to indicate that the query will be
+ ** satisfied by scanning multiple terms in the main index.
+ **
+ ** If the QUERY_TEST_NOIDX flag was specified, then this must be a
** prefix-query. Instead of using a prefix-index (if one exists),
** evaluate the prefix query using the main FTS index. This is used
** for internal sanity checking by the integrity-check in debug
** mode only. */
+#ifdef SQLITE_DEBUG
if( pConfig->bPrefixIndex==0 || (flags & FTS5INDEX_QUERY_TEST_NOIDX) ){
assert( flags & FTS5INDEX_QUERY_PREFIX );
iIdx = 1+pConfig->nPrefix;
}
if( iIdx<=pConfig->nPrefix ){
+ /* Straight index lookup */
Fts5Structure *pStruct = fts5StructureRead(p);
- buf.p[0] = FTS5_MAIN_PREFIX + iIdx;
+ buf.p[0] = (u8)(FTS5_MAIN_PREFIX + iIdx);
if( pStruct ){
- fts5MultiIterNew(p, pStruct, 1, flags, buf.p, nToken+1, -1, 0, &pRet);
+ fts5MultiIterNew(p, pStruct, flags | FTS5INDEX_QUERY_SKIPEMPTY,
+ pColset, buf.p, nToken+1, -1, 0, &pRet
+ );
fts5StructureRelease(pStruct);
}
}else{
+ /* Scan multiple terms in the main index */
int bDesc = (flags & FTS5INDEX_QUERY_DESC)!=0;
buf.p[0] = FTS5_MAIN_PREFIX;
fts5SetupPrefixIter(p, bDesc, buf.p, nToken+1, pColset, &pRet);
+ assert( p->rc!=SQLITE_OK || pRet->pColset==0 );
+ fts5IterSetOutputCb(&p->rc, pRet);
+ if( p->rc==SQLITE_OK ){
+ Fts5SegIter *pSeg = &pRet->aSeg[pRet->aFirst[1].iFirst];
+ if( pSeg->pLeaf ) pRet->xSetOutputs(pRet, pSeg);
+ }
}
if( p->rc ){
- sqlite3Fts5IterClose(pRet);
+ sqlite3Fts5IterClose((Fts5IndexIter*)pRet);
pRet = 0;
fts5CloseReader(p);
}
- *ppIter = pRet;
+
+ *ppIter = &pRet->base;
sqlite3Fts5BufferFree(&buf);
}
return fts5IndexReturn(p);
/*
** Return true if the iterator passed as the only argument is at EOF.
*/
-static int sqlite3Fts5IterEof(Fts5IndexIter *pIter){
- assert( pIter->pIndex->rc==SQLITE_OK );
- return pIter->bEof;
-}
-
/*
** Move to the next matching rowid.
*/
-static int sqlite3Fts5IterNext(Fts5IndexIter *pIter){
+static int sqlite3Fts5IterNext(Fts5IndexIter *pIndexIter){
+ Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
assert( pIter->pIndex->rc==SQLITE_OK );
fts5MultiIterNext(pIter->pIndex, pIter, 0, 0);
return fts5IndexReturn(pIter->pIndex);
/*
** Move to the next matching term/rowid. Used by the fts5vocab module.
*/
-static int sqlite3Fts5IterNextScan(Fts5IndexIter *pIter){
+static int sqlite3Fts5IterNextScan(Fts5IndexIter *pIndexIter){
+ Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
Fts5Index *p = pIter->pIndex;
assert( pIter->pIndex->rc==SQLITE_OK );
if( pSeg->pLeaf && pSeg->term.p[0]!=FTS5_MAIN_PREFIX ){
fts5DataRelease(pSeg->pLeaf);
pSeg->pLeaf = 0;
- pIter->bEof = 1;
+ pIter->base.bEof = 1;
}
}
** definition of "at or after" depends on whether this iterator iterates
** in ascending or descending rowid order.
*/
-static int sqlite3Fts5IterNextFrom(Fts5IndexIter *pIter, i64 iMatch){
+static int sqlite3Fts5IterNextFrom(Fts5IndexIter *pIndexIter, i64 iMatch){
+ Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
fts5MultiIterNextFrom(pIter->pIndex, pIter, iMatch);
return fts5IndexReturn(pIter->pIndex);
}
-/*
-** Return the current rowid.
-*/
-static i64 sqlite3Fts5IterRowid(Fts5IndexIter *pIter){
- return fts5MultiIterRowid(pIter);
-}
-
/*
** Return the current term.
*/
-static const char *sqlite3Fts5IterTerm(Fts5IndexIter *pIter, int *pn){
+static const char *sqlite3Fts5IterTerm(Fts5IndexIter *pIndexIter, int *pn){
int n;
- const char *z = (const char*)fts5MultiIterTerm(pIter, &n);
+ const char *z = (const char*)fts5MultiIterTerm((Fts5Iter*)pIndexIter, &n);
*pn = n-1;
return &z[1];
}
-
-static int fts5IndexExtractColset (
- Fts5Colset *pColset, /* Colset to filter on */
- const u8 *pPos, int nPos, /* Position list */
- Fts5Buffer *pBuf /* Output buffer */
-){
- int rc = SQLITE_OK;
- int i;
-
- fts5BufferZero(pBuf);
- for(i=0; i<pColset->nCol; i++){
- const u8 *pSub = pPos;
- int nSub = fts5IndexExtractCol(&pSub, nPos, pColset->aiCol[i]);
- if( nSub ){
- fts5BufferAppendBlob(&rc, pBuf, nSub, pSub);
- }
- }
- return rc;
-}
-
-
-/*
-** Return a pointer to a buffer containing a copy of the position list for
-** the current entry. Output variable *pn is set to the size of the buffer
-** in bytes before returning.
-**
-** The returned position list does not include the "number of bytes" varint
-** field that starts the position list on disk.
-*/
-static int sqlite3Fts5IterPoslist(
- Fts5IndexIter *pIter,
- Fts5Colset *pColset, /* Column filter (or NULL) */
- const u8 **pp, /* OUT: Pointer to position-list data */
- int *pn, /* OUT: Size of position-list in bytes */
- i64 *piRowid /* OUT: Current rowid */
-){
- Fts5SegIter *pSeg = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
- assert( pIter->pIndex->rc==SQLITE_OK );
- *piRowid = pSeg->iRowid;
- if( pSeg->iLeafOffset+pSeg->nPos<=pSeg->pLeaf->szLeaf ){
- u8 *pPos = &pSeg->pLeaf->p[pSeg->iLeafOffset];
- if( pColset==0 || pIter->bFiltered ){
- *pn = pSeg->nPos;
- *pp = pPos;
- }else if( pColset->nCol==1 ){
- *pp = pPos;
- *pn = fts5IndexExtractCol(pp, pSeg->nPos, pColset->aiCol[0]);
- }else{
- fts5BufferZero(&pIter->poslist);
- fts5IndexExtractColset(pColset, pPos, pSeg->nPos, &pIter->poslist);
- *pp = pIter->poslist.p;
- *pn = pIter->poslist.n;
- }
- }else{
- fts5BufferZero(&pIter->poslist);
- fts5SegiterPoslist(pIter->pIndex, pSeg, pColset, &pIter->poslist);
- *pp = pIter->poslist.p;
- *pn = pIter->poslist.n;
- }
- return fts5IndexReturn(pIter->pIndex);
-}
-
-/*
-** This function is similar to sqlite3Fts5IterPoslist(), except that it
-** copies the position list into the buffer supplied as the second
-** argument.
-*/
-static int sqlite3Fts5IterPoslistBuffer(Fts5IndexIter *pIter, Fts5Buffer *pBuf){
- Fts5Index *p = pIter->pIndex;
- Fts5SegIter *pSeg = &pIter->aSeg[ pIter->aFirst[1].iFirst ];
- assert( p->rc==SQLITE_OK );
- fts5BufferZero(pBuf);
- fts5SegiterPoslist(p, pSeg, 0, pBuf);
- return fts5IndexReturn(p);
-}
-
/*
** Close an iterator opened by an earlier call to sqlite3Fts5IndexQuery().
*/
-static void sqlite3Fts5IterClose(Fts5IndexIter *pIter){
- if( pIter ){
+static void sqlite3Fts5IterClose(Fts5IndexIter *pIndexIter){
+ if( pIndexIter ){
+ Fts5Iter *pIter = (Fts5Iter*)pIndexIter;
Fts5Index *pIndex = pIter->pIndex;
- fts5MultiIterFree(pIter->pIndex, pIter);
+ fts5MultiIterFree(pIter);
fts5CloseReader(pIndex);
}
}
/*
** Return a simple checksum value based on the arguments.
*/
-static u64 fts5IndexEntryCksum(
+static u64 sqlite3Fts5IndexEntryCksum(
i64 iRowid,
int iCol,
int iPos,
int flags, /* Flags for Fts5IndexQuery */
u64 *pCksum /* IN/OUT: Checksum value */
){
+ int eDetail = p->pConfig->eDetail;
u64 cksum = *pCksum;
- Fts5IndexIter *pIdxIter = 0;
- int rc = sqlite3Fts5IndexQuery(p, z, n, flags, 0, &pIdxIter);
+ Fts5IndexIter *pIter = 0;
+ int rc = sqlite3Fts5IndexQuery(p, z, n, flags, 0, &pIter);
- while( rc==SQLITE_OK && 0==sqlite3Fts5IterEof(pIdxIter) ){
- i64 dummy;
- const u8 *pPos;
- int nPos;
- i64 rowid = sqlite3Fts5IterRowid(pIdxIter);
- rc = sqlite3Fts5IterPoslist(pIdxIter, 0, &pPos, &nPos, &dummy);
- if( rc==SQLITE_OK ){
+ while( rc==SQLITE_OK && 0==sqlite3Fts5IterEof(pIter) ){
+ i64 rowid = pIter->iRowid;
+
+ if( eDetail==FTS5_DETAIL_NONE ){
+ cksum ^= sqlite3Fts5IndexEntryCksum(rowid, 0, 0, iIdx, z, n);
+ }else{
Fts5PoslistReader sReader;
- for(sqlite3Fts5PoslistReaderInit(pPos, nPos, &sReader);
+ for(sqlite3Fts5PoslistReaderInit(pIter->pData, pIter->nData, &sReader);
sReader.bEof==0;
sqlite3Fts5PoslistReaderNext(&sReader)
){
int iCol = FTS5_POS2COLUMN(sReader.iPos);
int iOff = FTS5_POS2OFFSET(sReader.iPos);
- cksum ^= fts5IndexEntryCksum(rowid, iCol, iOff, iIdx, z, n);
+ cksum ^= sqlite3Fts5IndexEntryCksum(rowid, iCol, iOff, iIdx, z, n);
}
- rc = sqlite3Fts5IterNext(pIdxIter);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3Fts5IterNext(pIter);
}
}
- sqlite3Fts5IterClose(pIdxIter);
+ sqlite3Fts5IterClose(pIter);
*pCksum = cksum;
return rc;
** ignore this b-tree entry. Otherwise, load it into memory. */
if( iIdxLeaf<pSeg->pgnoFirst ) continue;
iRow = FTS5_SEGMENT_ROWID(pSeg->iSegid, iIdxLeaf);
- pLeaf = fts5DataRead(p, iRow);
+ pLeaf = fts5LeafRead(p, iRow);
if( pLeaf==0 ) break;
/* Check that the leaf contains at least one term, and that it is equal
fts5DataRelease(pLeaf);
if( p->rc ) break;
-
/* Now check that the iter.nEmpty leaves following the current leaf
** (a) exist and (b) contain no terms. */
fts5IndexIntegrityCheckEmpty(
/*
** Run internal checks to ensure that the FTS index (a) is internally
** consistent and (b) contains entries for which the XOR of the checksums
-** as calculated by fts5IndexEntryCksum() is cksum.
+** as calculated by sqlite3Fts5IndexEntryCksum() is cksum.
**
** Return SQLITE_CORRUPT if any of the internal checks fail, or if the
** checksum does not match. Return SQLITE_OK if all checks pass without
** occurs.
*/
static int sqlite3Fts5IndexIntegrityCheck(Fts5Index *p, u64 cksum){
+ int eDetail = p->pConfig->eDetail;
u64 cksum2 = 0; /* Checksum based on contents of indexes */
Fts5Buffer poslist = {0,0,0}; /* Buffer used to hold a poslist */
- Fts5IndexIter *pIter; /* Used to iterate through entire index */
+ Fts5Iter *pIter; /* Used to iterate through entire index */
Fts5Structure *pStruct; /* Index structure */
+#ifdef SQLITE_DEBUG
/* Used by extra internal tests only run if NDEBUG is not defined */
u64 cksum3 = 0; /* Checksum based on contents of indexes */
Fts5Buffer term = {0,0,0}; /* Buffer used to hold most recent term */
+#endif
+ const int flags = FTS5INDEX_QUERY_NOOUTPUT;
/* Load the FTS index structure */
pStruct = fts5StructureRead(p);
** same term is performed. cksum3 is calculated based on the entries
** extracted by these queries.
*/
- for(fts5MultiIterNew(p, pStruct, 0, 0, 0, 0, -1, 0, &pIter);
+ for(fts5MultiIterNew(p, pStruct, flags, 0, 0, 0, -1, 0, &pIter);
fts5MultiIterEof(p, pIter)==0;
fts5MultiIterNext(p, pIter, 0, 0)
){
/* If this is a new term, query for it. Update cksum3 with the results. */
fts5TestTerm(p, &term, z, n, cksum2, &cksum3);
- poslist.n = 0;
- fts5SegiterPoslist(p, &pIter->aSeg[pIter->aFirst[1].iFirst] , 0, &poslist);
- while( 0==sqlite3Fts5PoslistNext64(poslist.p, poslist.n, &iOff, &iPos) ){
- int iCol = FTS5_POS2COLUMN(iPos);
- int iTokOff = FTS5_POS2OFFSET(iPos);
- cksum2 ^= fts5IndexEntryCksum(iRowid, iCol, iTokOff, -1, z, n);
+ if( eDetail==FTS5_DETAIL_NONE ){
+ if( 0==fts5MultiIterIsEmpty(p, pIter) ){
+ cksum2 ^= sqlite3Fts5IndexEntryCksum(iRowid, 0, 0, -1, z, n);
+ }
+ }else{
+ poslist.n = 0;
+ fts5SegiterPoslist(p, &pIter->aSeg[pIter->aFirst[1].iFirst], 0, &poslist);
+ while( 0==sqlite3Fts5PoslistNext64(poslist.p, poslist.n, &iOff, &iPos) ){
+ int iCol = FTS5_POS2COLUMN(iPos);
+ int iTokOff = FTS5_POS2OFFSET(iPos);
+ cksum2 ^= sqlite3Fts5IndexEntryCksum(iRowid, iCol, iTokOff, -1, z, n);
+ }
}
}
fts5TestTerm(p, &term, 0, 0, cksum2, &cksum3);
- fts5MultiIterFree(p, pIter);
+ fts5MultiIterFree(pIter);
if( p->rc==SQLITE_OK && cksum!=cksum2 ) p->rc = FTS5_CORRUPT;
fts5StructureRelease(pStruct);
+#ifdef SQLITE_DEBUG
fts5BufferFree(&term);
+#endif
fts5BufferFree(&poslist);
return fts5IndexReturn(p);
}
-
-/*
-** Calculate and return a checksum that is the XOR of the index entry
-** checksum of all entries that would be generated by the token specified
-** by the final 5 arguments.
-*/
-static u64 sqlite3Fts5IndexCksum(
- Fts5Config *pConfig, /* Configuration object */
- i64 iRowid, /* Document term appears in */
- int iCol, /* Column term appears in */
- int iPos, /* Position term appears in */
- const char *pTerm, int nTerm /* Term at iPos */
-){
- u64 ret = 0; /* Return value */
- int iIdx; /* For iterating through indexes */
-
- ret = fts5IndexEntryCksum(iRowid, iCol, iPos, 0, pTerm, nTerm);
-
- for(iIdx=0; iIdx<pConfig->nPrefix; iIdx++){
- int nByte = fts5IndexCharlenToBytelen(pTerm, nTerm, pConfig->aPrefix[iIdx]);
- if( nByte ){
- ret ^= fts5IndexEntryCksum(iRowid, iCol, iPos, iIdx+1, pTerm, nByte);
- }
- }
-
- return ret;
-}
-
/*************************************************************************
**************************************************************************
** Below this point is the implementation of the fts5_decode() scalar
}
while( iOff<n ){
int nPos;
- int bDummy;
- iOff += fts5GetPoslistSize(&a[iOff], &nPos, &bDummy);
+ int bDel;
+ iOff += fts5GetPoslistSize(&a[iOff], &nPos, &bDel);
+ sqlite3Fts5BufferAppendPrintf(pRc, pBuf, " nPos=%d%s", nPos, bDel?"*":"");
iOff += fts5DecodePoslist(pRc, pBuf, &a[iOff], MIN(n-iOff, nPos));
if( iOff<n ){
i64 iDelta;
return iOff;
}
+/*
+** This function is part of the fts5_decode() debugging function. It is
+** only ever used with detail=none tables.
+**
+** Buffer (pData/nData) contains a doclist in the format used by detail=none
+** tables. This function appends a human-readable version of that list to
+** buffer pBuf.
+**
+** If *pRc is other than SQLITE_OK when this function is called, it is a
+** no-op. If an OOM or other error occurs within this function, *pRc is
+** set to an SQLite error code before returning. The final state of buffer
+** pBuf is undefined in this case.
+*/
+static void fts5DecodeRowidList(
+ int *pRc, /* IN/OUT: Error code */
+ Fts5Buffer *pBuf, /* Buffer to append text to */
+ const u8 *pData, int nData /* Data to decode list-of-rowids from */
+){
+ int i = 0;
+ i64 iRowid = 0;
+
+ while( i<nData ){
+ const char *zApp = "";
+ u64 iVal;
+ i += sqlite3Fts5GetVarint(&pData[i], &iVal);
+ iRowid += iVal;
+
+ if( i<nData && pData[i]==0x00 ){
+ i++;
+ if( i<nData && pData[i]==0x00 ){
+ i++;
+ zApp = "+";
+ }else{
+ zApp = "*";
+ }
+ }
+
+ sqlite3Fts5BufferAppendPrintf(pRc, pBuf, " %lld%s", iRowid, zApp);
+ }
+}
+
/*
** The implementation of user-defined scalar function fts5_decode().
*/
Fts5Buffer s; /* Build up text to return here */
int rc = SQLITE_OK; /* Return code */
int nSpace = 0;
+ int eDetailNone = (sqlite3_user_data(pCtx)!=0);
assert( nArg==2 );
+ UNUSED_PARAM(nArg);
memset(&s, 0, sizeof(Fts5Buffer));
iRowid = sqlite3_value_int64(apVal[0]);
}else{
fts5DecodeStructure(&rc, &s, a, n);
}
+ }else if( eDetailNone ){
+ Fts5Buffer term; /* Current term read from page */
+ int szLeaf;
+ int iPgidxOff = szLeaf = fts5GetU16(&a[2]);
+ int iTermOff;
+ int nKeep = 0;
+ int iOff;
+
+ memset(&term, 0, sizeof(Fts5Buffer));
+
+ /* Decode any entries that occur before the first term. */
+ if( szLeaf<n ){
+ iPgidxOff += fts5GetVarint32(&a[iPgidxOff], iTermOff);
+ }else{
+ iTermOff = szLeaf;
+ }
+ fts5DecodeRowidList(&rc, &s, &a[4], iTermOff-4);
+
+ iOff = iTermOff;
+ while( iOff<szLeaf ){
+ int nAppend;
+
+ /* Read the term data for the next term*/
+ iOff += fts5GetVarint32(&a[iOff], nAppend);
+ term.n = nKeep;
+ fts5BufferAppendBlob(&rc, &term, nAppend, &a[iOff]);
+ sqlite3Fts5BufferAppendPrintf(
+ &rc, &s, " term=%.*s", term.n, (const char*)term.p
+ );
+ iOff += nAppend;
+
+ /* Figure out where the doclist for this term ends */
+ if( iPgidxOff<n ){
+ int nIncr;
+ iPgidxOff += fts5GetVarint32(&a[iPgidxOff], nIncr);
+ iTermOff += nIncr;
+ }else{
+ iTermOff = szLeaf;
+ }
+
+ fts5DecodeRowidList(&rc, &s, &a[iOff], iTermOff-iOff);
+ iOff = iTermOff;
+ if( iOff<szLeaf ){
+ iOff += fts5GetVarint32(&a[iOff], nKeep);
+ }
+ }
+
+ fts5BufferFree(&term);
}else{
Fts5Buffer term; /* Current term read from page */
int szLeaf; /* Offset of pgidx in a[] */
int rc = sqlite3_create_function(
db, "fts5_decode", 2, SQLITE_UTF8, 0, fts5DecodeFunction, 0, 0
);
+
+ if( rc==SQLITE_OK ){
+ rc = sqlite3_create_function(
+ db, "fts5_decode_none", 2,
+ SQLITE_UTF8, (void*)db, fts5DecodeFunction, 0, 0
+ );
+ }
+
if( rc==SQLITE_OK ){
rc = sqlite3_create_function(
db, "fts5_rowid", -1, SQLITE_UTF8, 0, fts5RowidFunction, 0, 0
}
+static int sqlite3Fts5IndexReset(Fts5Index *p){
+ assert( p->pStruct==0 || p->iStructVersion!=0 );
+ if( fts5IndexDataVersion(p)!=p->iStructVersion ){
+ fts5StructureInvalidate(p);
+ }
+ return fts5IndexReturn(p);
+}
+
/*
** 2014 Jun 09
**
*/
+/* #include "fts5Int.h" */
/*
** This variable is set to false when running tests for which the on disk
/*
** Values for Fts5Cursor.csrflags
*/
-#define FTS5CSR_REQUIRE_CONTENT 0x01
-#define FTS5CSR_REQUIRE_DOCSIZE 0x02
-#define FTS5CSR_REQUIRE_INST 0x04
-#define FTS5CSR_EOF 0x08
+#define FTS5CSR_EOF 0x01
+#define FTS5CSR_REQUIRE_CONTENT 0x02
+#define FTS5CSR_REQUIRE_DOCSIZE 0x04
+#define FTS5CSR_REQUIRE_INST 0x08
#define FTS5CSR_FREE_ZRANK 0x10
#define FTS5CSR_REQUIRE_RESEEK 0x20
+#define FTS5CSR_REQUIRE_POSLIST 0x40
#define BitFlagAllTest(x,y) (((x) & (y))==(y))
#define BitFlagTest(x,y) (((x) & (y))!=0)
rc = sqlite3Fts5ConfigDeclareVtab(pConfig);
}
+ /* Load the initial configuration */
+ if( rc==SQLITE_OK ){
+ assert( pConfig->pzErrmsg==0 );
+ pConfig->pzErrmsg = pzErr;
+ rc = sqlite3Fts5IndexLoadConfig(pTab->pIndex);
+ sqlite3Fts5IndexRollback(pTab->pIndex);
+ pConfig->pzErrmsg = 0;
+ }
+
if( rc!=SQLITE_OK ){
fts5FreeVtab(pTab);
pTab = 0;
*/
static void fts5SetUniqueFlag(sqlite3_index_info *pIdxInfo){
#if SQLITE_VERSION_NUMBER>=3008012
- if( sqlite3_libversion_number()>=3008012 ){
+#ifndef SQLITE_CORE
+ if( sqlite3_libversion_number()>=3008012 )
+#endif
+ {
pIdxInfo->idxFlags |= SQLITE_INDEX_SCAN_UNIQUE;
}
#endif
static int fts5BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){
Fts5Table *pTab = (Fts5Table*)pVTab;
Fts5Config *pConfig = pTab->pConfig;
+ const int nCol = pConfig->nCol;
int idxFlags = 0; /* Parameter passed through to xFilter() */
int bHasMatch;
int iNext;
int aColMap[3];
aColMap[0] = -1;
- aColMap[1] = pConfig->nCol;
- aColMap[2] = pConfig->nCol+1;
+ aColMap[1] = nCol;
+ aColMap[2] = nCol+1;
/* Set idxFlags flags for all WHERE clause terms that will be used. */
for(i=0; i<pInfo->nConstraint; i++){
struct sqlite3_index_constraint *p = &pInfo->aConstraint[i];
- int j;
- for(j=0; j<sizeof(aConstraint)/sizeof(aConstraint[0]); j++){
- struct Constraint *pC = &aConstraint[j];
- if( p->iColumn==aColMap[pC->iCol] && p->op & pC->op ){
- if( p->usable ){
+ int iCol = p->iColumn;
+
+ if( (p->op==SQLITE_INDEX_CONSTRAINT_MATCH && iCol>=0 && iCol<=nCol)
+ || (p->op==SQLITE_INDEX_CONSTRAINT_EQ && iCol==nCol)
+ ){
+ /* A MATCH operator or equivalent */
+ if( p->usable ){
+ idxFlags = (idxFlags & 0xFFFF) | FTS5_BI_MATCH | (iCol << 16);
+ aConstraint[0].iConsIndex = i;
+ }else{
+ /* As there exists an unusable MATCH constraint this is an
+ ** unusable plan. Set a prohibitively high cost. */
+ pInfo->estimatedCost = 1e50;
+ return SQLITE_OK;
+ }
+ }else{
+ int j;
+ for(j=1; j<ArraySize(aConstraint); j++){
+ struct Constraint *pC = &aConstraint[j];
+ if( iCol==aColMap[pC->iCol] && p->op & pC->op && p->usable ){
pC->iConsIndex = i;
idxFlags |= pC->fts5op;
- }else if( j==0 ){
- /* As there exists an unusable MATCH constraint this is an
- ** unusable plan. Set a prohibitively high cost. */
- pInfo->estimatedCost = 1e50;
- return SQLITE_OK;
}
}
}
/* Assign argvIndex values to each constraint in use. */
iNext = 1;
- for(i=0; i<sizeof(aConstraint)/sizeof(aConstraint[0]); i++){
+ for(i=0; i<ArraySize(aConstraint); i++){
struct Constraint *pC = &aConstraint[i];
if( pC->iConsIndex>=0 ){
pInfo->aConstraintUsage[pC->iConsIndex].argvIndex = iNext++;
- pInfo->aConstraintUsage[pC->iConsIndex].omit = pC->omit;
+ pInfo->aConstraintUsage[pC->iConsIndex].omit = (unsigned char)pC->omit;
}
}
return SQLITE_OK;
}
+static int fts5NewTransaction(Fts5Table *pTab){
+ Fts5Cursor *pCsr;
+ for(pCsr=pTab->pGlobal->pCsr; pCsr; pCsr=pCsr->pNext){
+ if( pCsr->base.pVtab==(sqlite3_vtab*)pTab ) return SQLITE_OK;
+ }
+ return sqlite3Fts5StorageReset(pTab->pStorage);
+}
+
/*
** Implementation of xOpen method.
*/
static int fts5OpenMethod(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCsr){
Fts5Table *pTab = (Fts5Table*)pVTab;
Fts5Config *pConfig = pTab->pConfig;
- Fts5Cursor *pCsr; /* New cursor object */
+ Fts5Cursor *pCsr = 0; /* New cursor object */
int nByte; /* Bytes of space to allocate */
- int rc = SQLITE_OK; /* Return code */
+ int rc; /* Return code */
- nByte = sizeof(Fts5Cursor) + pConfig->nCol * sizeof(int);
- pCsr = (Fts5Cursor*)sqlite3_malloc(nByte);
- if( pCsr ){
- Fts5Global *pGlobal = pTab->pGlobal;
- memset(pCsr, 0, nByte);
- pCsr->aColumnSize = (int*)&pCsr[1];
- pCsr->pNext = pGlobal->pCsr;
- pGlobal->pCsr = pCsr;
- pCsr->iCsrId = ++pGlobal->iNextId;
- }else{
- rc = SQLITE_NOMEM;
+ rc = fts5NewTransaction(pTab);
+ if( rc==SQLITE_OK ){
+ nByte = sizeof(Fts5Cursor) + pConfig->nCol * sizeof(int);
+ pCsr = (Fts5Cursor*)sqlite3_malloc(nByte);
+ if( pCsr ){
+ Fts5Global *pGlobal = pTab->pGlobal;
+ memset(pCsr, 0, nByte);
+ pCsr->aColumnSize = (int*)&pCsr[1];
+ pCsr->pNext = pGlobal->pCsr;
+ pGlobal->pCsr = pCsr;
+ pCsr->iCsrId = ++pGlobal->iNextId;
+ }else{
+ rc = SQLITE_NOMEM;
+ }
}
*ppCsr = (sqlite3_vtab_cursor*)pCsr;
return rc;
FTS5CSR_REQUIRE_CONTENT
| FTS5CSR_REQUIRE_DOCSIZE
| FTS5CSR_REQUIRE_INST
+ | FTS5CSR_REQUIRE_POSLIST
);
}
nBlob = sqlite3_column_bytes(pSorter->pStmt, 1);
aBlob = a = sqlite3_column_blob(pSorter->pStmt, 1);
- for(i=0; i<(pSorter->nIdx-1); i++){
- int iVal;
- a += fts5GetVarint32(a, iVal);
- iOff += iVal;
- pSorter->aIdx[i] = iOff;
+ /* nBlob==0 in detail=none mode. */
+ if( nBlob>0 ){
+ for(i=0; i<(pSorter->nIdx-1); i++){
+ int iVal;
+ a += fts5GetVarint32(a, iVal);
+ iOff += iVal;
+ pSorter->aIdx[i] = iOff;
+ }
+ pSorter->aIdx[i] = &aBlob[nBlob] - a;
+ pSorter->aPoslist = a;
}
- pSorter->aIdx[i] = &aBlob[nBlob] - a;
- pSorter->aPoslist = a;
fts5CsrNewrow(pCsr);
}
i64 iRowid = sqlite3Fts5ExprRowid(pCsr->pExpr);
rc = sqlite3Fts5ExprFirst(pCsr->pExpr, pTab->pIndex, iRowid, bDesc);
- if( rc==SQLITE_OK && iRowid!=sqlite3Fts5ExprRowid(pCsr->pExpr) ){
+ if( rc==SQLITE_OK && iRowid!=sqlite3Fts5ExprRowid(pCsr->pExpr) ){
*pbSkip = 1;
}
fts5CsrNewrow(pCsr);
if( sqlite3Fts5ExprEof(pCsr->pExpr) ){
CsrFlagSet(pCsr, FTS5CSR_EOF);
+ *pbSkip = 1;
}
}
return rc;
*/
static int fts5NextMethod(sqlite3_vtab_cursor *pCursor){
Fts5Cursor *pCsr = (Fts5Cursor*)pCursor;
- int rc = SQLITE_OK;
+ int rc;
assert( (pCsr->ePlan<3)==
(pCsr->ePlan==FTS5_PLAN_MATCH || pCsr->ePlan==FTS5_PLAN_SOURCE)
);
+ assert( !CsrFlagTest(pCsr, FTS5CSR_EOF) );
if( pCsr->ePlan<3 ){
int bSkip = 0;
if( (rc = fts5CursorReseek(pCsr, &bSkip)) || bSkip ) return rc;
rc = sqlite3Fts5ExprNext(pCsr->pExpr, pCsr->iLastRowid);
- if( sqlite3Fts5ExprEof(pCsr->pExpr) ){
- CsrFlagSet(pCsr, FTS5CSR_EOF);
- }
+ CsrFlagSet(pCsr, sqlite3Fts5ExprEof(pCsr->pExpr));
fts5CsrNewrow(pCsr);
}else{
switch( pCsr->ePlan ){
case FTS5_PLAN_SPECIAL: {
CsrFlagSet(pCsr, FTS5CSR_EOF);
+ rc = SQLITE_OK;
break;
}
return rc;
}
+
+static int fts5PrepareStatement(
+ sqlite3_stmt **ppStmt,
+ Fts5Config *pConfig,
+ const char *zFmt,
+ ...
+){
+ sqlite3_stmt *pRet = 0;
+ int rc;
+ char *zSql;
+ va_list ap;
+
+ va_start(ap, zFmt);
+ zSql = sqlite3_vmprintf(zFmt, ap);
+ if( zSql==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ rc = sqlite3_prepare_v3(pConfig->db, zSql, -1,
+ SQLITE_PREPARE_PERSISTENT, &pRet, 0);
+ if( rc!=SQLITE_OK ){
+ *pConfig->pzErrmsg = sqlite3_mprintf("%s", sqlite3_errmsg(pConfig->db));
+ }
+ sqlite3_free(zSql);
+ }
+
+ va_end(ap);
+ *ppStmt = pRet;
+ return rc;
+}
+
static int fts5CursorFirstSorted(Fts5Table *pTab, Fts5Cursor *pCsr, int bDesc){
Fts5Config *pConfig = pTab->pConfig;
Fts5Sorter *pSorter;
int nPhrase;
int nByte;
- int rc = SQLITE_OK;
- char *zSql;
+ int rc;
const char *zRank = pCsr->zRank;
const char *zRankArgs = pCsr->zRankArgs;
** table, saving it creates a circular reference.
**
** If SQLite a built-in statement cache, this wouldn't be a problem. */
- zSql = sqlite3Fts5Mprintf(&rc,
+ rc = fts5PrepareStatement(&pSorter->pStmt, pConfig,
"SELECT rowid, rank FROM %Q.%Q ORDER BY %s(%s%s%s) %s",
pConfig->zDb, pConfig->zName, zRank, pConfig->zName,
(zRankArgs ? ", " : ""),
(zRankArgs ? zRankArgs : ""),
bDesc ? "DESC" : "ASC"
);
- if( zSql ){
- rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &pSorter->pStmt, 0);
- sqlite3_free(zSql);
- }
pCsr->pSorter = pSorter;
if( rc==SQLITE_OK ){
char *zSql = sqlite3Fts5Mprintf(&rc, "SELECT %s", zRankArgs);
if( zSql ){
sqlite3_stmt *pStmt = 0;
- rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &pStmt, 0);
+ rc = sqlite3_prepare_v3(pConfig->db, zSql, -1,
+ SQLITE_PREPARE_PERSISTENT, &pStmt, 0);
sqlite3_free(zSql);
assert( rc==SQLITE_OK || pCsr->pRankArgStmt==0 );
if( rc==SQLITE_OK ){
static int fts5FilterMethod(
sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */
int idxNum, /* Strategy index */
- const char *idxStr, /* Unused */
+ const char *zUnused, /* Unused */
int nVal, /* Number of elements in apVal */
sqlite3_value **apVal /* Arguments for the indexing scheme */
){
sqlite3_value *pRowidEq = 0; /* rowid = ? expression (or NULL) */
sqlite3_value *pRowidLe = 0; /* rowid <= ? expression (or NULL) */
sqlite3_value *pRowidGe = 0; /* rowid >= ? expression (or NULL) */
+ int iCol; /* Column on LHS of MATCH operator */
char **pzErrmsg = pConfig->pzErrmsg;
+ UNUSED_PARAM(zUnused);
+ UNUSED_PARAM(nVal);
+
if( pCsr->ePlan ){
fts5FreeCursorComponents(pCsr);
memset(&pCsr->ePlan, 0, sizeof(Fts5Cursor) - ((u8*)&pCsr->ePlan-(u8*)pCsr));
if( BitFlagTest(idxNum, FTS5_BI_ROWID_EQ) ) pRowidEq = apVal[iVal++];
if( BitFlagTest(idxNum, FTS5_BI_ROWID_LE) ) pRowidLe = apVal[iVal++];
if( BitFlagTest(idxNum, FTS5_BI_ROWID_GE) ) pRowidGe = apVal[iVal++];
+ iCol = (idxNum>>16);
+ assert( iCol>=0 && iCol<=pConfig->nCol );
assert( iVal==nVal );
bOrderByRank = ((idxNum & FTS5_BI_ORDER_RANK) ? 1 : 0);
pCsr->bDesc = bDesc = ((idxNum & FTS5_BI_ORDER_DESC) ? 1 : 0);
rc = fts5SpecialMatch(pTab, pCsr, &zExpr[1]);
}else{
char **pzErr = &pTab->base.zErrMsg;
- rc = sqlite3Fts5ExprNew(pConfig, zExpr, &pCsr->pExpr, pzErr);
+ rc = sqlite3Fts5ExprNew(pConfig, iCol, zExpr, &pCsr->pExpr, pzErr);
if( rc==SQLITE_OK ){
if( bOrderByRank ){
pCsr->ePlan = FTS5_PLAN_SORTED_MATCH;
static int fts5SpecialDelete(
Fts5Table *pTab,
- sqlite3_value **apVal,
- sqlite3_int64 *piRowid
+ sqlite3_value **apVal
){
int rc = SQLITE_OK;
int eType1 = sqlite3_value_type(apVal[1]);
if( eType1==SQLITE_INTEGER ){
sqlite3_int64 iDel = sqlite3_value_int64(apVal[1]);
- rc = sqlite3Fts5StorageSpecialDelete(pTab->pStorage, iDel, &apVal[2]);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iDel, &apVal[2]);
}
return rc;
}
if( pConfig->eContent!=FTS5_CONTENT_NORMAL
&& 0==sqlite3_stricmp("delete", z)
){
- rc = fts5SpecialDelete(pTab, apVal, pRowid);
+ rc = fts5SpecialDelete(pTab, apVal);
}else{
rc = fts5SpecialInsert(pTab, z, apVal[2 + pConfig->nCol + 1]);
}
**
** Cases 3 and 4 may violate the rowid constraint.
*/
- int eConflict = sqlite3_vtab_on_conflict(pConfig->db);
+ int eConflict = SQLITE_ABORT;
+ if( pConfig->eContent==FTS5_CONTENT_NORMAL ){
+ eConflict = sqlite3_vtab_on_conflict(pConfig->db);
+ }
assert( eType0==SQLITE_INTEGER || eType0==SQLITE_NULL );
assert( nArg!=1 || eType0==SQLITE_INTEGER );
rc = SQLITE_ERROR;
}
- /* Case 1: DELETE */
+ /* DELETE */
else if( nArg==1 ){
i64 iDel = sqlite3_value_int64(apVal[0]); /* Rowid to delete */
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iDel);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iDel, 0);
}
- /* Case 2: INSERT */
+ /* INSERT */
else if( eType0!=SQLITE_INTEGER ){
/* If this is a REPLACE, first remove the current entry (if any) */
if( eConflict==SQLITE_REPLACE
&& sqlite3_value_type(apVal[1])==SQLITE_INTEGER
){
i64 iNew = sqlite3_value_int64(apVal[1]); /* Rowid to delete */
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iNew);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iNew, 0);
}
fts5StorageInsert(&rc, pTab, apVal, pRowid);
}
- /* Case 2: UPDATE */
+ /* UPDATE */
else{
i64 iOld = sqlite3_value_int64(apVal[0]); /* Old rowid */
i64 iNew = sqlite3_value_int64(apVal[1]); /* New rowid */
if( iOld!=iNew ){
if( eConflict==SQLITE_REPLACE ){
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld, 0);
if( rc==SQLITE_OK ){
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iNew);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iNew, 0);
}
fts5StorageInsert(&rc, pTab, apVal, pRowid);
}else{
rc = sqlite3Fts5StorageContentInsert(pTab->pStorage, apVal, pRowid);
if( rc==SQLITE_OK ){
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld, 0);
}
if( rc==SQLITE_OK ){
rc = sqlite3Fts5StorageIndexInsert(pTab->pStorage, apVal, *pRowid);
}
}
}else{
- rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld);
+ rc = sqlite3Fts5StorageDelete(pTab->pStorage, iOld, 0);
fts5StorageInsert(&rc, pTab, apVal, pRowid);
}
}
fts5CheckTransactionState(pTab, FTS5_SYNC, 0);
pTab->pConfig->pzErrmsg = &pTab->base.zErrMsg;
fts5TripCursors(pTab);
- rc = sqlite3Fts5StorageSync(pTab->pStorage, 1);
+ rc = sqlite3Fts5StorageSync(pTab->pStorage);
pTab->pConfig->pzErrmsg = 0;
return rc;
}
*/
static int fts5BeginMethod(sqlite3_vtab *pVtab){
fts5CheckTransactionState((Fts5Table*)pVtab, FTS5_BEGIN, 0);
+ fts5NewTransaction((Fts5Table*)pVtab);
return SQLITE_OK;
}
** by fts5SyncMethod().
*/
static int fts5CommitMethod(sqlite3_vtab *pVtab){
+ UNUSED_PARAM(pVtab); /* Call below is a no-op for NDEBUG builds */
fts5CheckTransactionState((Fts5Table*)pVtab, FTS5_COMMIT, 0);
return SQLITE_OK;
}
return rc;
}
+static int fts5CsrPoslist(Fts5Cursor*, int, const u8**, int*);
+
static void *fts5ApiUserData(Fts5Context *pCtx){
Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
return pCsr->pAux->pUserData;
return sqlite3Fts5ExprPhraseSize(pCsr->pExpr, iPhrase);
}
-static int fts5CsrPoslist(Fts5Cursor *pCsr, int iPhrase, const u8 **pa){
- int n;
- if( pCsr->pSorter ){
+static int fts5ApiColumnText(
+ Fts5Context *pCtx,
+ int iCol,
+ const char **pz,
+ int *pn
+){
+ int rc = SQLITE_OK;
+ Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
+ if( fts5IsContentless((Fts5Table*)(pCsr->base.pVtab)) ){
+ *pz = 0;
+ *pn = 0;
+ }else{
+ rc = fts5SeekCursor(pCsr, 0);
+ if( rc==SQLITE_OK ){
+ *pz = (const char*)sqlite3_column_text(pCsr->pStmt, iCol+1);
+ *pn = sqlite3_column_bytes(pCsr->pStmt, iCol+1);
+ }
+ }
+ return rc;
+}
+
+static int fts5CsrPoslist(
+ Fts5Cursor *pCsr,
+ int iPhrase,
+ const u8 **pa,
+ int *pn
+){
+ Fts5Config *pConfig = ((Fts5Table*)(pCsr->base.pVtab))->pConfig;
+ int rc = SQLITE_OK;
+ int bLive = (pCsr->pSorter==0);
+
+ if( CsrFlagTest(pCsr, FTS5CSR_REQUIRE_POSLIST) ){
+
+ if( pConfig->eDetail!=FTS5_DETAIL_FULL ){
+ Fts5PoslistPopulator *aPopulator;
+ int i;
+ aPopulator = sqlite3Fts5ExprClearPoslists(pCsr->pExpr, bLive);
+ if( aPopulator==0 ) rc = SQLITE_NOMEM;
+ for(i=0; i<pConfig->nCol && rc==SQLITE_OK; i++){
+ int n; const char *z;
+ rc = fts5ApiColumnText((Fts5Context*)pCsr, i, &z, &n);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3Fts5ExprPopulatePoslists(
+ pConfig, pCsr->pExpr, aPopulator, i, z, n
+ );
+ }
+ }
+ sqlite3_free(aPopulator);
+
+ if( pCsr->pSorter ){
+ sqlite3Fts5ExprCheckPoslists(pCsr->pExpr, pCsr->pSorter->iRowid);
+ }
+ }
+ CsrFlagClear(pCsr, FTS5CSR_REQUIRE_POSLIST);
+ }
+
+ if( pCsr->pSorter && pConfig->eDetail==FTS5_DETAIL_FULL ){
Fts5Sorter *pSorter = pCsr->pSorter;
int i1 = (iPhrase==0 ? 0 : pSorter->aIdx[iPhrase-1]);
- n = pSorter->aIdx[iPhrase] - i1;
+ *pn = pSorter->aIdx[iPhrase] - i1;
*pa = &pSorter->aPoslist[i1];
}else{
- n = sqlite3Fts5ExprPoslist(pCsr->pExpr, iPhrase, pa);
+ *pn = sqlite3Fts5ExprPoslist(pCsr->pExpr, iPhrase, pa);
}
- return n;
+
+ return rc;
}
/*
int i;
/* Initialize all iterators */
- for(i=0; i<nIter; i++){
+ for(i=0; i<nIter && rc==SQLITE_OK; i++){
const u8 *a;
- int n = fts5CsrPoslist(pCsr, i, &a);
- sqlite3Fts5PoslistReaderInit(a, n, &aIter[i]);
+ int n;
+ rc = fts5CsrPoslist(pCsr, i, &a, &n);
+ if( rc==SQLITE_OK ){
+ sqlite3Fts5PoslistReaderInit(a, n, &aIter[i]);
+ }
}
- while( 1 ){
- int *aInst;
- int iBest = -1;
- for(i=0; i<nIter; i++){
- if( (aIter[i].bEof==0)
- && (iBest<0 || aIter[i].iPos<aIter[iBest].iPos)
- ){
- iBest = i;
+ if( rc==SQLITE_OK ){
+ while( 1 ){
+ int *aInst;
+ int iBest = -1;
+ for(i=0; i<nIter; i++){
+ if( (aIter[i].bEof==0)
+ && (iBest<0 || aIter[i].iPos<aIter[iBest].iPos)
+ ){
+ iBest = i;
+ }
}
- }
- if( iBest<0 ) break;
+ if( iBest<0 ) break;
- nInst++;
- if( nInst>=pCsr->nInstAlloc ){
- pCsr->nInstAlloc = pCsr->nInstAlloc ? pCsr->nInstAlloc*2 : 32;
- aInst = (int*)sqlite3_realloc(
- pCsr->aInst, pCsr->nInstAlloc*sizeof(int)*3
- );
- if( aInst ){
- pCsr->aInst = aInst;
- }else{
- rc = SQLITE_NOMEM;
- break;
+ nInst++;
+ if( nInst>=pCsr->nInstAlloc ){
+ pCsr->nInstAlloc = pCsr->nInstAlloc ? pCsr->nInstAlloc*2 : 32;
+ aInst = (int*)sqlite3_realloc(
+ pCsr->aInst, pCsr->nInstAlloc*sizeof(int)*3
+ );
+ if( aInst ){
+ pCsr->aInst = aInst;
+ }else{
+ rc = SQLITE_NOMEM;
+ break;
+ }
}
- }
- aInst = &pCsr->aInst[3 * (nInst-1)];
- aInst[0] = iBest;
- aInst[1] = FTS5_POS2COLUMN(aIter[iBest].iPos);
- aInst[2] = FTS5_POS2OFFSET(aIter[iBest].iPos);
- sqlite3Fts5PoslistReaderNext(&aIter[iBest]);
+ aInst = &pCsr->aInst[3 * (nInst-1)];
+ aInst[0] = iBest;
+ aInst[1] = FTS5_POS2COLUMN(aIter[iBest].iPos);
+ aInst[2] = FTS5_POS2OFFSET(aIter[iBest].iPos);
+ sqlite3Fts5PoslistReaderNext(&aIter[iBest]);
+ }
}
pCsr->nInstCount = nInst;
){
if( iIdx<0 || iIdx>=pCsr->nInstCount ){
rc = SQLITE_RANGE;
+#if 0
+ }else if( fts5IsOffsetless((Fts5Table*)pCsr->base.pVtab) ){
+ *piPhrase = pCsr->aInst[iIdx*3];
+ *piCol = pCsr->aInst[iIdx*3 + 2];
+ *piOff = -1;
+#endif
}else{
*piPhrase = pCsr->aInst[iIdx*3];
*piCol = pCsr->aInst[iIdx*3 + 1];
return fts5CursorRowid((Fts5Cursor*)pCtx);
}
-static int fts5ApiColumnText(
- Fts5Context *pCtx,
- int iCol,
- const char **pz,
- int *pn
-){
- int rc = SQLITE_OK;
- Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
- if( fts5IsContentless((Fts5Table*)(pCsr->base.pVtab)) ){
- *pz = 0;
- *pn = 0;
- }else{
- rc = fts5SeekCursor(pCsr, 0);
- if( rc==SQLITE_OK ){
- *pz = (const char*)sqlite3_column_text(pCsr->pStmt, iCol+1);
- *pn = sqlite3_column_bytes(pCsr->pStmt, iCol+1);
- }
- }
- return rc;
-}
-
static int fts5ColumnSizeCb(
void *pContext, /* Pointer to int */
int tflags,
- const char *pToken, /* Buffer containing token */
- int nToken, /* Size of token in bytes */
- int iStart, /* Start offset of token */
- int iEnd /* End offset of token */
+ const char *pUnused, /* Buffer containing token */
+ int nUnused, /* Size of token in bytes */
+ int iUnused1, /* Start offset of token */
+ int iUnused2 /* End offset of token */
){
int *pCnt = (int*)pContext;
+ UNUSED_PARAM2(pUnused, nUnused);
+ UNUSED_PARAM2(iUnused1, iUnused2);
if( (tflags & FTS5_TOKEN_COLOCATED)==0 ){
(*pCnt)++;
}
}
static void fts5ApiPhraseNext(
- Fts5Context *pCtx,
+ Fts5Context *pUnused,
Fts5PhraseIter *pIter,
int *piCol, int *piOff
){
+ UNUSED_PARAM(pUnused);
if( pIter->a>=pIter->b ){
*piCol = -1;
*piOff = -1;
}
}
-static void fts5ApiPhraseFirst(
+static int fts5ApiPhraseFirst(
Fts5Context *pCtx,
int iPhrase,
Fts5PhraseIter *pIter,
int *piCol, int *piOff
){
Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
- int n = fts5CsrPoslist(pCsr, iPhrase, &pIter->a);
- pIter->b = &pIter->a[n];
- *piCol = 0;
- *piOff = 0;
- fts5ApiPhraseNext(pCtx, pIter, piCol, piOff);
+ int n;
+ int rc = fts5CsrPoslist(pCsr, iPhrase, &pIter->a, &n);
+ if( rc==SQLITE_OK ){
+ pIter->b = &pIter->a[n];
+ *piCol = 0;
+ *piOff = 0;
+ fts5ApiPhraseNext(pCtx, pIter, piCol, piOff);
+ }
+ return rc;
}
+static void fts5ApiPhraseNextColumn(
+ Fts5Context *pCtx,
+ Fts5PhraseIter *pIter,
+ int *piCol
+){
+ Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
+ Fts5Config *pConfig = ((Fts5Table*)(pCsr->base.pVtab))->pConfig;
+
+ if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
+ if( pIter->a>=pIter->b ){
+ *piCol = -1;
+ }else{
+ int iIncr;
+ pIter->a += fts5GetVarint32(&pIter->a[0], iIncr);
+ *piCol += (iIncr-2);
+ }
+ }else{
+ while( 1 ){
+ int dummy;
+ if( pIter->a>=pIter->b ){
+ *piCol = -1;
+ return;
+ }
+ if( pIter->a[0]==0x01 ) break;
+ pIter->a += fts5GetVarint32(pIter->a, dummy);
+ }
+ pIter->a += 1 + fts5GetVarint32(&pIter->a[1], *piCol);
+ }
+}
+
+static int fts5ApiPhraseFirstColumn(
+ Fts5Context *pCtx,
+ int iPhrase,
+ Fts5PhraseIter *pIter,
+ int *piCol
+){
+ int rc = SQLITE_OK;
+ Fts5Cursor *pCsr = (Fts5Cursor*)pCtx;
+ Fts5Config *pConfig = ((Fts5Table*)(pCsr->base.pVtab))->pConfig;
+
+ if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
+ Fts5Sorter *pSorter = pCsr->pSorter;
+ int n;
+ if( pSorter ){
+ int i1 = (iPhrase==0 ? 0 : pSorter->aIdx[iPhrase-1]);
+ n = pSorter->aIdx[iPhrase] - i1;
+ pIter->a = &pSorter->aPoslist[i1];
+ }else{
+ rc = sqlite3Fts5ExprPhraseCollist(pCsr->pExpr, iPhrase, &pIter->a, &n);
+ }
+ if( rc==SQLITE_OK ){
+ pIter->b = &pIter->a[n];
+ *piCol = 0;
+ fts5ApiPhraseNextColumn(pCtx, pIter, piCol);
+ }
+ }else{
+ int n;
+ rc = fts5CsrPoslist(pCsr, iPhrase, &pIter->a, &n);
+ if( rc==SQLITE_OK ){
+ pIter->b = &pIter->a[n];
+ if( n<=0 ){
+ *piCol = -1;
+ }else if( pIter->a[0]==0x01 ){
+ pIter->a += 1 + fts5GetVarint32(&pIter->a[1], *piCol);
+ }else{
+ *piCol = 0;
+ }
+ }
+ }
+
+ return rc;
+}
+
+
static int fts5ApiQueryPhrase(Fts5Context*, int, void*,
int(*)(const Fts5ExtensionApi*, Fts5Context*, void*)
);
fts5ApiGetAuxdata,
fts5ApiPhraseFirst,
fts5ApiPhraseNext,
+ fts5ApiPhraseFirstColumn,
+ fts5ApiPhraseNextColumn,
};
-
/*
** Implementation of API function xQueryPhrase().
*/
rc = fts5OpenMethod(pCsr->base.pVtab, (sqlite3_vtab_cursor**)&pNew);
if( rc==SQLITE_OK ){
- Fts5Config *pConf = pTab->pConfig;
pNew->ePlan = FTS5_PLAN_MATCH;
pNew->iFirstRowid = SMALLEST_INT64;
pNew->iLastRowid = LARGEST_INT64;
pNew->base.pVtab = (sqlite3_vtab*)pTab;
- rc = sqlite3Fts5ExprClonePhrase(pConf, pCsr->pExpr, iPhrase, &pNew->pExpr);
+ rc = sqlite3Fts5ExprClonePhrase(pCsr->pExpr, iPhrase, &pNew->pExpr);
}
if( rc==SQLITE_OK ){
** Given cursor id iId, return a pointer to the corresponding Fts5Index
** object. Or NULL If the cursor id does not exist.
**
-** If successful, set *pnCol to the number of indexed columns in the
-** table before returning.
+** If successful, set *ppConfig to point to the associated config object
+** before returning.
*/
static Fts5Index *sqlite3Fts5IndexFromCsrid(
- Fts5Global *pGlobal,
- i64 iCsrId,
- int *pnCol
+ Fts5Global *pGlobal, /* FTS5 global context for db handle */
+ i64 iCsrId, /* Id of cursor to find */
+ Fts5Config **ppConfig /* OUT: Configuration object */
){
Fts5Cursor *pCsr;
Fts5Table *pTab;
pCsr = fts5CursorFromCsrid(pGlobal, iCsrId);
pTab = (Fts5Table*)pCsr->base.pVtab;
- *pnCol = pTab->pConfig->nCol;
+ *ppConfig = pTab->pConfig;
return pTab->pIndex;
}
Fts5Buffer val;
memset(&val, 0, sizeof(Fts5Buffer));
+ switch( ((Fts5Table*)(pCsr->base.pVtab))->pConfig->eDetail ){
+ case FTS5_DETAIL_FULL:
- /* Append the varints */
- for(i=0; i<(nPhrase-1); i++){
- const u8 *dummy;
- int nByte = sqlite3Fts5ExprPoslist(pCsr->pExpr, i, &dummy);
- sqlite3Fts5BufferAppendVarint(&rc, &val, nByte);
- }
+ /* Append the varints */
+ for(i=0; i<(nPhrase-1); i++){
+ const u8 *dummy;
+ int nByte = sqlite3Fts5ExprPoslist(pCsr->pExpr, i, &dummy);
+ sqlite3Fts5BufferAppendVarint(&rc, &val, nByte);
+ }
- /* Append the position lists */
- for(i=0; i<nPhrase; i++){
- const u8 *pPoslist;
- int nPoslist;
- nPoslist = sqlite3Fts5ExprPoslist(pCsr->pExpr, i, &pPoslist);
- sqlite3Fts5BufferAppendBlob(&rc, &val, nPoslist, pPoslist);
+ /* Append the position lists */
+ for(i=0; i<nPhrase; i++){
+ const u8 *pPoslist;
+ int nPoslist;
+ nPoslist = sqlite3Fts5ExprPoslist(pCsr->pExpr, i, &pPoslist);
+ sqlite3Fts5BufferAppendBlob(&rc, &val, nPoslist, pPoslist);
+ }
+ break;
+
+ case FTS5_DETAIL_COLUMNS:
+
+ /* Append the varints */
+ for(i=0; rc==SQLITE_OK && i<(nPhrase-1); i++){
+ const u8 *dummy;
+ int nByte;
+ rc = sqlite3Fts5ExprPhraseCollist(pCsr->pExpr, i, &dummy, &nByte);
+ sqlite3Fts5BufferAppendVarint(&rc, &val, nByte);
+ }
+
+ /* Append the position lists */
+ for(i=0; rc==SQLITE_OK && i<nPhrase; i++){
+ const u8 *pPoslist;
+ int nPoslist;
+ rc = sqlite3Fts5ExprPhraseCollist(pCsr->pExpr, i, &pPoslist, &nPoslist);
+ sqlite3Fts5BufferAppendBlob(&rc, &val, nPoslist, pPoslist);
+ }
+ break;
+
+ default:
+ break;
}
sqlite3_result_blob(pCtx, val.p, val.n, sqlite3_free);
*/
static int fts5FindFunctionMethod(
sqlite3_vtab *pVtab, /* Virtual table handle */
- int nArg, /* Number of SQL function arguments */
+ int nUnused, /* Number of SQL function arguments */
const char *zName, /* Name of SQL function */
void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), /* OUT: Result */
void **ppArg /* OUT: User data for *pxFunc */
Fts5Table *pTab = (Fts5Table*)pVtab;
Fts5Auxiliary *pAux;
+ UNUSED_PARAM(nUnused);
pAux = fts5FindAuxiliary(pTab, zName);
if( pAux ){
*pxFunc = fts5ApiCallback;
*/
static int fts5SavepointMethod(sqlite3_vtab *pVtab, int iSavepoint){
Fts5Table *pTab = (Fts5Table*)pVtab;
+ UNUSED_PARAM(iSavepoint); /* Call below is a no-op for NDEBUG builds */
fts5CheckTransactionState(pTab, FTS5_SAVEPOINT, iSavepoint);
fts5TripCursors(pTab);
- return sqlite3Fts5StorageSync(pTab->pStorage, 0);
+ return sqlite3Fts5StorageSync(pTab->pStorage);
}
/*
*/
static int fts5ReleaseMethod(sqlite3_vtab *pVtab, int iSavepoint){
Fts5Table *pTab = (Fts5Table*)pVtab;
+ UNUSED_PARAM(iSavepoint); /* Call below is a no-op for NDEBUG builds */
fts5CheckTransactionState(pTab, FTS5_RELEASE, iSavepoint);
fts5TripCursors(pTab);
- return sqlite3Fts5StorageSync(pTab->pStorage, 0);
+ return sqlite3Fts5StorageSync(pTab->pStorage);
}
/*
*/
static int fts5RollbackToMethod(sqlite3_vtab *pVtab, int iSavepoint){
Fts5Table *pTab = (Fts5Table*)pVtab;
+ UNUSED_PARAM(iSavepoint); /* Call below is a no-op for NDEBUG builds */
fts5CheckTransactionState(pTab, FTS5_ROLLBACKTO, iSavepoint);
fts5TripCursors(pTab);
return sqlite3Fts5StorageRollback(pTab->pStorage);
static void fts5Fts5Func(
sqlite3_context *pCtx, /* Function call context */
int nArg, /* Number of args */
- sqlite3_value **apVal /* Function arguments */
+ sqlite3_value **apArg /* Function arguments */
){
Fts5Global *pGlobal = (Fts5Global*)sqlite3_user_data(pCtx);
- char buf[8];
- assert( nArg==0 );
- assert( sizeof(buf)>=sizeof(pGlobal) );
- memcpy(buf, (void*)&pGlobal, sizeof(pGlobal));
- sqlite3_result_blob(pCtx, buf, sizeof(pGlobal), SQLITE_TRANSIENT);
+ fts5_api **ppApi;
+ UNUSED_PARAM(nArg);
+ assert( nArg==1 );
+ ppApi = (fts5_api**)sqlite3_value_pointer(apArg[0], "fts5_api_ptr");
+ if( ppApi ) *ppApi = &pGlobal->api;
}
/*
static void fts5SourceIdFunc(
sqlite3_context *pCtx, /* Function call context */
int nArg, /* Number of args */
- sqlite3_value **apVal /* Function arguments */
+ sqlite3_value **apUnused /* Function arguments */
){
assert( nArg==0 );
- sqlite3_result_text(pCtx, "fts5: 2015-10-14 12:29:53 a721fc0d89495518fe5612e2e3bbc60befd2e90d", -1, SQLITE_TRANSIENT);
+ UNUSED_PARAM2(nArg, apUnused);
+ sqlite3_result_text(pCtx, "fts5: 2018-04-02 11:04:16 736b53f57f70b23172c30880186dce7ad9baa3b74e3838cae5847cffb98f5cd2", -1, SQLITE_TRANSIENT);
}
static int fts5Init(sqlite3 *db){
if( rc==SQLITE_OK ) rc = sqlite3Fts5VocabInit(pGlobal, db);
if( rc==SQLITE_OK ){
rc = sqlite3_create_function(
- db, "fts5", 0, SQLITE_UTF8, p, fts5Fts5Func, 0, 0
+ db, "fts5", 1, SQLITE_UTF8, p, fts5Fts5Func, 0, 0
);
}
if( rc==SQLITE_OK ){
);
}
}
+
+ /* If SQLITE_FTS5_ENABLE_TEST_MI is defined, assume that the file
+ ** fts5_test_mi.c is compiled and linked into the executable. And call
+ ** its entry point to enable the matchinfo() demo. */
+#ifdef SQLITE_FTS5_ENABLE_TEST_MI
+ if( rc==SQLITE_OK ){
+ extern int sqlite3Fts5TestRegisterMatchinfo(sqlite3*);
+ rc = sqlite3Fts5TestRegisterMatchinfo(db);
+ }
+#endif
+
return rc;
}
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts_init(
+SQLITE_API int sqlite3_fts_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
#ifdef _WIN32
__declspec(dllexport)
#endif
-SQLITE_API int SQLITE_STDCALL sqlite3_fts5_init(
+SQLITE_API int sqlite3_fts5_init(
sqlite3 *db,
char **pzErrMsg,
const sqlite3_api_routines *pApi
+/* #include "fts5Int.h" */
struct Fts5Storage {
Fts5Config *pConfig;
if( zSql==0 ){
rc = SQLITE_NOMEM;
}else{
- rc = sqlite3_prepare_v2(pC->db, zSql, -1, &p->aStmt[eStmt], 0);
+ rc = sqlite3_prepare_v3(pC->db, zSql, -1,
+ SQLITE_PREPARE_PERSISTENT, &p->aStmt[eStmt], 0);
sqlite3_free(zSql);
if( rc!=SQLITE_OK && pzErrMsg ){
*pzErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pC->db));
}
*ppStmt = p->aStmt[eStmt];
+ sqlite3_reset(*ppStmt);
return rc;
}
static int sqlite3Fts5StorageRename(Fts5Storage *pStorage, const char *zName){
Fts5Config *pConfig = pStorage->pConfig;
- int rc = sqlite3Fts5StorageSync(pStorage, 1);
+ int rc = sqlite3Fts5StorageSync(pStorage);
fts5StorageRenameOne(pConfig, &rc, "data", zName);
fts5StorageRenameOne(pConfig, &rc, "idx", zName);
char *zErr = 0;
rc = fts5ExecPrintf(pConfig->db, &zErr, "CREATE TABLE %Q.'%q_%q'(%s)%s",
- pConfig->zDb, pConfig->zName, zPost, zDefn, bWithout?" WITHOUT ROWID":""
+ pConfig->zDb, pConfig->zName, zPost, zDefn,
+#ifndef SQLITE_FTS5_NO_WITHOUT_ROWID
+ bWithout?" WITHOUT ROWID":
+#endif
+ ""
);
if( zErr ){
*pzErr = sqlite3_mprintf(
int i;
int iOff;
sqlite3_snprintf(nDefn, zDefn, "id INTEGER PRIMARY KEY");
- iOff = strlen(zDefn);
+ iOff = (int)strlen(zDefn);
for(i=0; i<pConfig->nCol; i++){
sqlite3_snprintf(nDefn-iOff, &zDefn[iOff], ", c%d", i);
- iOff += strlen(&zDefn[iOff]);
+ iOff += (int)strlen(&zDefn[iOff]);
}
rc = sqlite3Fts5CreateTable(pConfig, "content", zDefn, 0, pzErr);
}
int tflags,
const char *pToken, /* Buffer containing token */
int nToken, /* Size of token in bytes */
- int iStart, /* Start offset of token */
- int iEnd /* End offset of token */
+ int iUnused1, /* Start offset of token */
+ int iUnused2 /* End offset of token */
){
Fts5InsertCtx *pCtx = (Fts5InsertCtx*)pContext;
Fts5Index *pIdx = pCtx->pStorage->pIndex;
+ UNUSED_PARAM2(iUnused1, iUnused2);
+ if( nToken>FTS5_MAX_TOKEN_SIZE ) nToken = FTS5_MAX_TOKEN_SIZE;
if( (tflags & FTS5_TOKEN_COLOCATED)==0 || pCtx->szCol==0 ){
pCtx->szCol++;
}
** delete-markers to the FTS index necessary to delete it. Do not actually
** remove the %_content row at this time though.
*/
-static int fts5StorageDeleteFromIndex(Fts5Storage *p, i64 iDel){
+static int fts5StorageDeleteFromIndex(
+ Fts5Storage *p,
+ i64 iDel,
+ sqlite3_value **apVal
+){
Fts5Config *pConfig = p->pConfig;
- sqlite3_stmt *pSeek; /* SELECT to read row iDel from %_data */
+ sqlite3_stmt *pSeek = 0; /* SELECT to read row iDel from %_data */
int rc; /* Return code */
+ int rc2; /* sqlite3_reset() return code */
+ int iCol;
+ Fts5InsertCtx ctx;
- rc = fts5StorageGetStmt(p, FTS5_STMT_LOOKUP, &pSeek, 0);
- if( rc==SQLITE_OK ){
- int rc2;
+ if( apVal==0 ){
+ rc = fts5StorageGetStmt(p, FTS5_STMT_LOOKUP, &pSeek, 0);
+ if( rc!=SQLITE_OK ) return rc;
sqlite3_bind_int64(pSeek, 1, iDel);
- if( sqlite3_step(pSeek)==SQLITE_ROW ){
- int iCol;
- Fts5InsertCtx ctx;
- ctx.pStorage = p;
- ctx.iCol = -1;
- rc = sqlite3Fts5IndexBeginWrite(p->pIndex, 1, iDel);
- for(iCol=1; rc==SQLITE_OK && iCol<=pConfig->nCol; iCol++){
- if( pConfig->abUnindexed[iCol-1] ) continue;
- ctx.szCol = 0;
- rc = sqlite3Fts5Tokenize(pConfig,
- FTS5_TOKENIZE_DOCUMENT,
- (const char*)sqlite3_column_text(pSeek, iCol),
- sqlite3_column_bytes(pSeek, iCol),
- (void*)&ctx,
- fts5StorageInsertCallback
- );
- p->aTotalSize[iCol-1] -= (i64)ctx.szCol;
+ if( sqlite3_step(pSeek)!=SQLITE_ROW ){
+ return sqlite3_reset(pSeek);
+ }
+ }
+
+ ctx.pStorage = p;
+ ctx.iCol = -1;
+ rc = sqlite3Fts5IndexBeginWrite(p->pIndex, 1, iDel);
+ for(iCol=1; rc==SQLITE_OK && iCol<=pConfig->nCol; iCol++){
+ if( pConfig->abUnindexed[iCol-1]==0 ){
+ const char *zText;
+ int nText;
+ if( pSeek ){
+ zText = (const char*)sqlite3_column_text(pSeek, iCol);
+ nText = sqlite3_column_bytes(pSeek, iCol);
+ }else{
+ zText = (const char*)sqlite3_value_text(apVal[iCol-1]);
+ nText = sqlite3_value_bytes(apVal[iCol-1]);
}
- p->nTotalRow--;
+ ctx.szCol = 0;
+ rc = sqlite3Fts5Tokenize(pConfig, FTS5_TOKENIZE_DOCUMENT,
+ zText, nText, (void*)&ctx, fts5StorageInsertCallback
+ );
+ p->aTotalSize[iCol-1] -= (i64)ctx.szCol;
}
- rc2 = sqlite3_reset(pSeek);
- if( rc==SQLITE_OK ) rc = rc2;
}
+ p->nTotalRow--;
+ rc2 = sqlite3_reset(pSeek);
+ if( rc==SQLITE_OK ) rc = rc2;
return rc;
}
sqlite3_bind_blob(pReplace, 2, pBuf->p, pBuf->n, SQLITE_STATIC);
sqlite3_step(pReplace);
rc = sqlite3_reset(pReplace);
+ sqlite3_bind_null(pReplace, 2);
}
}
return rc;
/*
** Remove a row from the FTS table.
*/
-static int sqlite3Fts5StorageDelete(Fts5Storage *p, i64 iDel){
+static int sqlite3Fts5StorageDelete(Fts5Storage *p, i64 iDel, sqlite3_value **apVal){
Fts5Config *pConfig = p->pConfig;
int rc;
sqlite3_stmt *pDel = 0;
+ assert( pConfig->eContent!=FTS5_CONTENT_NORMAL || apVal==0 );
rc = fts5StorageLoadTotals(p, 1);
/* Delete the index records */
if( rc==SQLITE_OK ){
- rc = fts5StorageDeleteFromIndex(p, iDel);
+ rc = fts5StorageDeleteFromIndex(p, iDel, apVal);
}
/* Delete the %_docsize record */
}
/* Delete the %_content record */
- if( rc==SQLITE_OK ){
- rc = fts5StorageGetStmt(p, FTS5_STMT_DELETE_CONTENT, &pDel, 0);
- }
- if( rc==SQLITE_OK ){
- sqlite3_bind_int64(pDel, 1, iDel);
- sqlite3_step(pDel);
- rc = sqlite3_reset(pDel);
- }
-
- /* Write the averages record */
- if( rc==SQLITE_OK ){
- rc = fts5StorageSaveTotals(p);
- }
-
- return rc;
-}
-
-static int sqlite3Fts5StorageSpecialDelete(
- Fts5Storage *p,
- i64 iDel,
- sqlite3_value **apVal
-){
- Fts5Config *pConfig = p->pConfig;
- int rc;
- sqlite3_stmt *pDel = 0;
-
- assert( pConfig->eContent!=FTS5_CONTENT_NORMAL );
- rc = fts5StorageLoadTotals(p, 1);
-
- /* Delete the index records */
- if( rc==SQLITE_OK ){
- int iCol;
- Fts5InsertCtx ctx;
- ctx.pStorage = p;
- ctx.iCol = -1;
-
- rc = sqlite3Fts5IndexBeginWrite(p->pIndex, 1, iDel);
- for(iCol=0; rc==SQLITE_OK && iCol<pConfig->nCol; iCol++){
- if( pConfig->abUnindexed[iCol] ) continue;
- ctx.szCol = 0;
- rc = sqlite3Fts5Tokenize(pConfig,
- FTS5_TOKENIZE_DOCUMENT,
- (const char*)sqlite3_value_text(apVal[iCol]),
- sqlite3_value_bytes(apVal[iCol]),
- (void*)&ctx,
- fts5StorageInsertCallback
- );
- p->aTotalSize[iCol] -= (i64)ctx.szCol;
- }
- p->nTotalRow--;
- }
-
- /* Delete the %_docsize record */
- if( pConfig->bColumnsize ){
+ if( pConfig->eContent==FTS5_CONTENT_NORMAL ){
if( rc==SQLITE_OK ){
- rc = fts5StorageGetStmt(p, FTS5_STMT_DELETE_DOCSIZE, &pDel, 0);
+ rc = fts5StorageGetStmt(p, FTS5_STMT_DELETE_CONTENT, &pDel, 0);
}
if( rc==SQLITE_OK ){
sqlite3_bind_int64(pDel, 1, iDel);
}
}
- /* Write the averages record */
- if( rc==SQLITE_OK ){
- rc = fts5StorageSaveTotals(p);
- }
-
return rc;
}
return sqlite3Fts5IndexMerge(p->pIndex, nMerge);
}
+static int sqlite3Fts5StorageReset(Fts5Storage *p){
+ return sqlite3Fts5IndexReset(p->pIndex);
+}
+
/*
** Allocate a new rowid. This is used for "external content" tables when
** a NULL value is inserted into the rowid column. The new rowid is allocated
}else{
sqlite3_stmt *pInsert = 0; /* Statement to write %_content table */
int i; /* Counter variable */
-#if 0
- if( eConflict==SQLITE_REPLACE ){
- eStmt = FTS5_STMT_REPLACE_CONTENT;
- rc = fts5StorageDeleteFromIndex(p, sqlite3_value_int64(apVal[1]));
- }else{
- eStmt = FTS5_STMT_INSERT_CONTENT;
- }
-#endif
- if( rc==SQLITE_OK ){
- rc = fts5StorageGetStmt(p, FTS5_STMT_INSERT_CONTENT, &pInsert, 0);
- }
+ rc = fts5StorageGetStmt(p, FTS5_STMT_INSERT_CONTENT, &pInsert, 0);
for(i=1; rc==SQLITE_OK && i<=pConfig->nCol+1; i++){
rc = sqlite3_bind_value(pInsert, i, apVal[i]);
}
}
sqlite3_free(buf.p);
- /* Write the averages record */
- if( rc==SQLITE_OK ){
- rc = fts5StorageSaveTotals(p);
- }
-
return rc;
}
int iCol;
int szCol;
u64 cksum;
+ Fts5Termset *pTermset;
Fts5Config *pConfig;
};
+
/*
** Tokenization callback used by integrity check.
*/
static int fts5StorageIntegrityCallback(
- void *pContext, /* Pointer to Fts5InsertCtx object */
+ void *pContext, /* Pointer to Fts5IntegrityCtx object */
int tflags,
const char *pToken, /* Buffer containing token */
int nToken, /* Size of token in bytes */
- int iStart, /* Start offset of token */
- int iEnd /* End offset of token */
+ int iUnused1, /* Start offset of token */
+ int iUnused2 /* End offset of token */
){
Fts5IntegrityCtx *pCtx = (Fts5IntegrityCtx*)pContext;
+ Fts5Termset *pTermset = pCtx->pTermset;
+ int bPresent;
+ int ii;
+ int rc = SQLITE_OK;
+ int iPos;
+ int iCol;
+
+ UNUSED_PARAM2(iUnused1, iUnused2);
+ if( nToken>FTS5_MAX_TOKEN_SIZE ) nToken = FTS5_MAX_TOKEN_SIZE;
+
if( (tflags & FTS5_TOKEN_COLOCATED)==0 || pCtx->szCol==0 ){
pCtx->szCol++;
}
- pCtx->cksum ^= sqlite3Fts5IndexCksum(
- pCtx->pConfig, pCtx->iRowid, pCtx->iCol, pCtx->szCol-1, pToken, nToken
- );
- return SQLITE_OK;
+
+ switch( pCtx->pConfig->eDetail ){
+ case FTS5_DETAIL_FULL:
+ iPos = pCtx->szCol-1;
+ iCol = pCtx->iCol;
+ break;
+
+ case FTS5_DETAIL_COLUMNS:
+ iPos = pCtx->iCol;
+ iCol = 0;
+ break;
+
+ default:
+ assert( pCtx->pConfig->eDetail==FTS5_DETAIL_NONE );
+ iPos = 0;
+ iCol = 0;
+ break;
+ }
+
+ rc = sqlite3Fts5TermsetAdd(pTermset, 0, pToken, nToken, &bPresent);
+ if( rc==SQLITE_OK && bPresent==0 ){
+ pCtx->cksum ^= sqlite3Fts5IndexEntryCksum(
+ pCtx->iRowid, iCol, iPos, 0, pToken, nToken
+ );
+ }
+
+ for(ii=0; rc==SQLITE_OK && ii<pCtx->pConfig->nPrefix; ii++){
+ const int nChar = pCtx->pConfig->aPrefix[ii];
+ int nByte = sqlite3Fts5IndexCharlenToBytelen(pToken, nToken, nChar);
+ if( nByte ){
+ rc = sqlite3Fts5TermsetAdd(pTermset, ii+1, pToken, nByte, &bPresent);
+ if( bPresent==0 ){
+ pCtx->cksum ^= sqlite3Fts5IndexEntryCksum(
+ pCtx->iRowid, iCol, iPos, ii+1, pToken, nByte
+ );
+ }
+ }
+ }
+
+ return rc;
}
/*
if( pConfig->bColumnsize ){
rc = sqlite3Fts5StorageDocsize(p, ctx.iRowid, aColSize);
}
+ if( rc==SQLITE_OK && pConfig->eDetail==FTS5_DETAIL_NONE ){
+ rc = sqlite3Fts5TermsetNew(&ctx.pTermset);
+ }
for(i=0; rc==SQLITE_OK && i<pConfig->nCol; i++){
if( pConfig->abUnindexed[i] ) continue;
ctx.iCol = i;
ctx.szCol = 0;
- rc = sqlite3Fts5Tokenize(pConfig,
- FTS5_TOKENIZE_DOCUMENT,
- (const char*)sqlite3_column_text(pScan, i+1),
- sqlite3_column_bytes(pScan, i+1),
- (void*)&ctx,
- fts5StorageIntegrityCallback
- );
- if( pConfig->bColumnsize && ctx.szCol!=aColSize[i] ){
+ if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
+ rc = sqlite3Fts5TermsetNew(&ctx.pTermset);
+ }
+ if( rc==SQLITE_OK ){
+ rc = sqlite3Fts5Tokenize(pConfig,
+ FTS5_TOKENIZE_DOCUMENT,
+ (const char*)sqlite3_column_text(pScan, i+1),
+ sqlite3_column_bytes(pScan, i+1),
+ (void*)&ctx,
+ fts5StorageIntegrityCallback
+ );
+ }
+ if( rc==SQLITE_OK && pConfig->bColumnsize && ctx.szCol!=aColSize[i] ){
rc = FTS5_CORRUPT;
}
aTotalSize[i] += ctx.szCol;
+ if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
+ sqlite3Fts5TermsetFree(ctx.pTermset);
+ ctx.pTermset = 0;
+ }
}
+ sqlite3Fts5TermsetFree(ctx.pTermset);
+ ctx.pTermset = 0;
+
if( rc!=SQLITE_OK ) break;
}
rc2 = sqlite3_reset(pScan);
/* Check that the %_docsize and %_content tables contain the expected
** number of rows. */
if( rc==SQLITE_OK && pConfig->eContent==FTS5_CONTENT_NORMAL ){
- i64 nRow;
+ i64 nRow = 0;
rc = fts5StorageCount(p, "content", &nRow);
if( rc==SQLITE_OK && nRow!=p->nTotalRow ) rc = FTS5_CORRUPT;
}
if( rc==SQLITE_OK && pConfig->bColumnsize ){
- i64 nRow;
+ i64 nRow = 0;
rc = fts5StorageCount(p, "docsize", &nRow);
if( rc==SQLITE_OK && nRow!=p->nTotalRow ) rc = FTS5_CORRUPT;
}
/*
** Flush any data currently held in-memory to disk.
*/
-static int sqlite3Fts5StorageSync(Fts5Storage *p, int bCommit){
- if( bCommit && p->bTotalsValid ){
- int rc = fts5StorageSaveTotals(p);
+static int sqlite3Fts5StorageSync(Fts5Storage *p){
+ int rc = SQLITE_OK;
+ i64 iLastRowid = sqlite3_last_insert_rowid(p->pConfig->db);
+ if( p->bTotalsValid ){
+ rc = fts5StorageSaveTotals(p);
p->bTotalsValid = 0;
- if( rc!=SQLITE_OK ) return rc;
}
- return sqlite3Fts5IndexSync(p->pIndex, bCommit);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3Fts5IndexSync(p->pIndex);
+ }
+ sqlite3_set_last_insert_rowid(p->pConfig->db, iLastRowid);
+ return rc;
}
static int sqlite3Fts5StorageRollback(Fts5Storage *p){
}
sqlite3_step(pReplace);
rc = sqlite3_reset(pReplace);
+ sqlite3_bind_null(pReplace, 1);
}
if( rc==SQLITE_OK && pVal ){
int iNew = p->pConfig->iCookie + 1;
return rc;
}
-
-
/*
** 2014 May 31
**
*/
+/* #include "fts5Int.h" */
/**************************************************************************
** Start of ascii tokenizer implementation.
** Create an "ascii" tokenizer.
*/
static int fts5AsciiCreate(
- void *pCtx,
+ void *pUnused,
const char **azArg, int nArg,
Fts5Tokenizer **ppOut
){
int rc = SQLITE_OK;
AsciiTokenizer *p = 0;
+ UNUSED_PARAM(pUnused);
if( nArg%2 ){
rc = SQLITE_ERROR;
}else{
static int fts5AsciiTokenize(
Fts5Tokenizer *pTokenizer,
void *pCtx,
- int flags,
+ int iUnused,
const char *pText, int nText,
int (*xToken)(void*, int, const char*, int nToken, int iStart, int iEnd)
){
char *pFold = aFold;
unsigned char *a = p->aTokenChar;
+ UNUSED_PARAM(iUnused);
+
while( is<nText && rc==SQLITE_OK ){
int nByte;
int bTokenChars /* 1 for 'tokenchars', 0 for 'separators' */
){
int rc = SQLITE_OK;
- int n = strlen(z);
+ int n = (int)strlen(z);
int *aNew;
if( n>0 ){
int bToken;
READ_UTF8(zCsr, zTerm, iCode);
if( iCode<128 ){
- p->aTokenChar[iCode] = bTokenChars;
+ p->aTokenChar[iCode] = (unsigned char)bTokenChars;
}else{
bToken = sqlite3Fts5UnicodeIsalnum(iCode);
assert( (bToken==0 || bToken==1) );
** Create a "unicode61" tokenizer.
*/
static int fts5UnicodeCreate(
- void *pCtx,
+ void *pUnused,
const char **azArg, int nArg,
Fts5Tokenizer **ppOut
){
int rc = SQLITE_OK; /* Return code */
Unicode61Tokenizer *p = 0; /* New tokenizer object */
+ UNUSED_PARAM(pUnused);
+
if( nArg%2 ){
rc = SQLITE_ERROR;
}else{
static int fts5UnicodeTokenize(
Fts5Tokenizer *pTokenizer,
void *pCtx,
- int flags,
+ int iUnused,
const char *pText, int nText,
int (*xToken)(void*, int, const char*, int nToken, int iStart, int iEnd)
){
int nFold = p->nFold;
const char *pEnd = &aFold[nFold-6];
+ UNUSED_PARAM(iUnused);
+
/* Each iteration of this loop gobbles up a contiguous run of separators,
** then the next token. */
while( rc==SQLITE_OK ){
int rc = SQLITE_OK; /* Return code */
int i; /* To iterate through builtin functions */
- for(i=0; rc==SQLITE_OK && i<sizeof(aBuiltin)/sizeof(aBuiltin[0]); i++){
+ for(i=0; rc==SQLITE_OK && i<ArraySize(aBuiltin); i++){
rc = pApi->xCreateTokenizer(pApi,
aBuiltin[i].zName,
(void*)pApi,
0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001,
};
- if( c<128 ){
+ if( (unsigned int)c<128 ){
return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 );
- }else if( c<(1<<22) ){
+ }else if( (unsigned int)c<(1<<22) ){
unsigned int key = (((unsigned int)c)<<10) | 0x000003FF;
int iRes = 0;
int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1;
*/
+/* #include "fts5Int.h" */
/*
** This is a copy of the sqlite3GetVarint32() routine from the SQLite core.
static int sqlite3Fts5GetVarintLen(u32 iVal){
+#if 0
if( iVal<(1 << 7 ) ) return 1;
+#endif
+ assert( iVal>=(1 << 7) );
if( iVal<(1 << 14) ) return 2;
if( iVal<(1 << 21) ) return 3;
if( iVal<(1 << 28) ) return 4;
** the number of fts5 rows that contain at least one instance of term
** $term. Field $cnt is set to the total number of instances of term
** $term in the database.
+**
+** instance:
+** CREATE TABLE vocab(term, doc, col, offset, PRIMARY KEY(<all-fields>));
+**
+** One row for each term instance in the database.
*/
+/* #include "fts5Int.h" */
typedef struct Fts5VocabTable Fts5VocabTable;
char *zFts5Db; /* Db containing fts5 table */
sqlite3 *db; /* Database handle */
Fts5Global *pGlobal; /* FTS5 global object for this database */
- int eType; /* FTS5_VOCAB_COL or ROW */
+ int eType; /* FTS5_VOCAB_COL, ROW or INSTANCE */
};
struct Fts5VocabCursor {
int bEof; /* True if this cursor is at EOF */
Fts5IndexIter *pIter; /* Term/rowid iterator object */
+ int nLeTerm; /* Size of zLeTerm in bytes */
+ char *zLeTerm; /* (term <= $zLeTerm) paramater, or NULL */
+
/* These are used by 'col' tables only */
- int nCol;
+ Fts5Config *pConfig; /* Fts5 table configuration */
int iCol;
i64 *aCnt;
i64 *aDoc;
- /* Output values */
+ /* Output values used by all tables. */
i64 rowid; /* This table's current rowid value */
Fts5Buffer term; /* Current value of 'term' column */
- i64 aVal[3]; /* Up to three columns left of 'term' */
+
+ /* Output values Used by 'instance' tables only */
+ i64 iInstPos;
+ int iInstOff;
};
-#define FTS5_VOCAB_COL 0
-#define FTS5_VOCAB_ROW 1
+#define FTS5_VOCAB_COL 0
+#define FTS5_VOCAB_ROW 1
+#define FTS5_VOCAB_INSTANCE 2
#define FTS5_VOCAB_COL_SCHEMA "term, col, doc, cnt"
#define FTS5_VOCAB_ROW_SCHEMA "term, doc, cnt"
+#define FTS5_VOCAB_INST_SCHEMA "term, doc, col, offset"
+
+/*
+** Bits for the mask used as the idxNum value by xBestIndex/xFilter.
+*/
+#define FTS5_VOCAB_TERM_EQ 0x01
+#define FTS5_VOCAB_TERM_GE 0x02
+#define FTS5_VOCAB_TERM_LE 0x04
+
/*
** Translate a string containing an fts5vocab table type to an
if( sqlite3_stricmp(zCopy, "row")==0 ){
*peType = FTS5_VOCAB_ROW;
}else
+ if( sqlite3_stricmp(zCopy, "instance")==0 ){
+ *peType = FTS5_VOCAB_INSTANCE;
+ }else
{
*pzErr = sqlite3_mprintf("fts5vocab: unknown table type: %Q", zCopy);
rc = SQLITE_ERROR;
){
const char *azSchema[] = {
"CREATE TABlE vocab(" FTS5_VOCAB_COL_SCHEMA ")",
- "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")"
+ "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")",
+ "CREATE TABlE vocab(" FTS5_VOCAB_INST_SCHEMA ")"
};
Fts5VocabTable *pRet = 0;
const char *zDb = bDb ? argv[3] : argv[1];
const char *zTab = bDb ? argv[4] : argv[3];
const char *zType = bDb ? argv[5] : argv[4];
- int nDb = strlen(zDb)+1;
- int nTab = strlen(zTab)+1;
- int eType;
+ int nDb = (int)strlen(zDb)+1;
+ int nTab = (int)strlen(zTab)+1;
+ int eType = 0;
rc = fts5VocabTableType(zType, pzErr, &eType);
if( rc==SQLITE_OK ){
- assert( eType>=0 && eType<sizeof(azSchema)/sizeof(azSchema[0]) );
+ assert( eType>=0 && eType<ArraySize(azSchema) );
rc = sqlite3_declare_vtab(db, azSchema[eType]);
}
/*
** Implementation of the xBestIndex method.
+**
+** Only constraints of the form:
+**
+** term <= ?
+** term == ?
+** term >= ?
+**
+** are interpreted. Less-than and less-than-or-equal are treated
+** identically, as are greater-than and greater-than-or-equal.
*/
static int fts5VocabBestIndexMethod(
- sqlite3_vtab *pVTab,
+ sqlite3_vtab *pUnused,
sqlite3_index_info *pInfo
){
+ int i;
+ int iTermEq = -1;
+ int iTermGe = -1;
+ int iTermLe = -1;
+ int idxNum = 0;
+ int nArg = 0;
+
+ UNUSED_PARAM(pUnused);
+
+ for(i=0; i<pInfo->nConstraint; i++){
+ struct sqlite3_index_constraint *p = &pInfo->aConstraint[i];
+ if( p->usable==0 ) continue;
+ if( p->iColumn==0 ){ /* term column */
+ if( p->op==SQLITE_INDEX_CONSTRAINT_EQ ) iTermEq = i;
+ if( p->op==SQLITE_INDEX_CONSTRAINT_LE ) iTermLe = i;
+ if( p->op==SQLITE_INDEX_CONSTRAINT_LT ) iTermLe = i;
+ if( p->op==SQLITE_INDEX_CONSTRAINT_GE ) iTermGe = i;
+ if( p->op==SQLITE_INDEX_CONSTRAINT_GT ) iTermGe = i;
+ }
+ }
+
+ if( iTermEq>=0 ){
+ idxNum |= FTS5_VOCAB_TERM_EQ;
+ pInfo->aConstraintUsage[iTermEq].argvIndex = ++nArg;
+ pInfo->estimatedCost = 100;
+ }else{
+ pInfo->estimatedCost = 1000000;
+ if( iTermGe>=0 ){
+ idxNum |= FTS5_VOCAB_TERM_GE;
+ pInfo->aConstraintUsage[iTermGe].argvIndex = ++nArg;
+ pInfo->estimatedCost = pInfo->estimatedCost / 2;
+ }
+ if( iTermLe>=0 ){
+ idxNum |= FTS5_VOCAB_TERM_LE;
+ pInfo->aConstraintUsage[iTermLe].argvIndex = ++nArg;
+ pInfo->estimatedCost = pInfo->estimatedCost / 2;
+ }
+ }
+
+ /* This virtual table always delivers results in ascending order of
+ ** the "term" column (column 0). So if the user has requested this
+ ** specifically - "ORDER BY term" or "ORDER BY term ASC" - set the
+ ** sqlite3_index_info.orderByConsumed flag to tell the core the results
+ ** are already in sorted order. */
+ if( pInfo->nOrderBy==1
+ && pInfo->aOrderBy[0].iColumn==0
+ && pInfo->aOrderBy[0].desc==0
+ ){
+ pInfo->orderByConsumed = 1;
+ }
+
+ pInfo->idxNum = idxNum;
return SQLITE_OK;
}
){
Fts5VocabTable *pTab = (Fts5VocabTable*)pVTab;
Fts5Index *pIndex = 0;
- int nCol = 0;
+ Fts5Config *pConfig = 0;
Fts5VocabCursor *pCsr = 0;
int rc = SQLITE_OK;
sqlite3_stmt *pStmt = 0;
char *zSql = 0;
- int nByte;
zSql = sqlite3Fts5Mprintf(&rc,
"SELECT t.%Q FROM %Q.%Q AS t WHERE t.%Q MATCH '*id'",
if( pStmt && sqlite3_step(pStmt)==SQLITE_ROW ){
i64 iId = sqlite3_column_int64(pStmt, 0);
- pIndex = sqlite3Fts5IndexFromCsrid(pTab->pGlobal, iId, &nCol);
+ pIndex = sqlite3Fts5IndexFromCsrid(pTab->pGlobal, iId, &pConfig);
}
if( rc==SQLITE_OK && pIndex==0 ){
}
}
- nByte = nCol * sizeof(i64) * 2 + sizeof(Fts5VocabCursor);
- pCsr = (Fts5VocabCursor*)sqlite3Fts5MallocZero(&rc, nByte);
+ if( rc==SQLITE_OK ){
+ int nByte = pConfig->nCol * sizeof(i64) * 2 + sizeof(Fts5VocabCursor);
+ pCsr = (Fts5VocabCursor*)sqlite3Fts5MallocZero(&rc, nByte);
+ }
+
if( pCsr ){
pCsr->pIndex = pIndex;
pCsr->pStmt = pStmt;
- pCsr->nCol = nCol;
+ pCsr->pConfig = pConfig;
pCsr->aCnt = (i64*)&pCsr[1];
- pCsr->aDoc = &pCsr->aCnt[nCol];
+ pCsr->aDoc = &pCsr->aCnt[pConfig->nCol];
}else{
sqlite3_finalize(pStmt);
}
pCsr->rowid = 0;
sqlite3Fts5IterClose(pCsr->pIter);
pCsr->pIter = 0;
+ sqlite3_free(pCsr->zLeTerm);
+ pCsr->nLeTerm = -1;
+ pCsr->zLeTerm = 0;
}
/*
return SQLITE_OK;
}
+static int fts5VocabInstanceNewTerm(Fts5VocabCursor *pCsr){
+ int rc = SQLITE_OK;
+
+ if( sqlite3Fts5IterEof(pCsr->pIter) ){
+ pCsr->bEof = 1;
+ }else{
+ const char *zTerm;
+ int nTerm;
+ zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm);
+ if( pCsr->nLeTerm>=0 ){
+ int nCmp = MIN(nTerm, pCsr->nLeTerm);
+ int bCmp = memcmp(pCsr->zLeTerm, zTerm, nCmp);
+ if( bCmp<0 || (bCmp==0 && pCsr->nLeTerm<nTerm) ){
+ pCsr->bEof = 1;
+ }
+ }
+
+ sqlite3Fts5BufferSet(&rc, &pCsr->term, nTerm, (const u8*)zTerm);
+ }
+ return rc;
+}
+
+static int fts5VocabInstanceNext(Fts5VocabCursor *pCsr){
+ int eDetail = pCsr->pConfig->eDetail;
+ int rc = SQLITE_OK;
+ Fts5IndexIter *pIter = pCsr->pIter;
+ i64 *pp = &pCsr->iInstPos;
+ int *po = &pCsr->iInstOff;
+
+ while( eDetail==FTS5_DETAIL_NONE
+ || sqlite3Fts5PoslistNext64(pIter->pData, pIter->nData, po, pp)
+ ){
+ pCsr->iInstPos = 0;
+ pCsr->iInstOff = 0;
+
+ rc = sqlite3Fts5IterNextScan(pCsr->pIter);
+ if( rc==SQLITE_OK ){
+ rc = fts5VocabInstanceNewTerm(pCsr);
+ if( eDetail==FTS5_DETAIL_NONE ) break;
+ }
+ if( rc ){
+ pCsr->bEof = 1;
+ break;
+ }
+ }
+
+ return rc;
+}
/*
** Advance the cursor to the next row in the table.
Fts5VocabCursor *pCsr = (Fts5VocabCursor*)pCursor;
Fts5VocabTable *pTab = (Fts5VocabTable*)pCursor->pVtab;
int rc = SQLITE_OK;
+ int nCol = pCsr->pConfig->nCol;
pCsr->rowid++;
+ if( pTab->eType==FTS5_VOCAB_INSTANCE ){
+ return fts5VocabInstanceNext(pCsr);
+ }
+
if( pTab->eType==FTS5_VOCAB_COL ){
- for(pCsr->iCol++; pCsr->iCol<pCsr->nCol; pCsr->iCol++){
- if( pCsr->aCnt[pCsr->iCol] ) break;
+ for(pCsr->iCol++; pCsr->iCol<nCol; pCsr->iCol++){
+ if( pCsr->aDoc[pCsr->iCol] ) break;
}
}
- if( pTab->eType==FTS5_VOCAB_ROW || pCsr->iCol>=pCsr->nCol ){
+ if( pTab->eType!=FTS5_VOCAB_COL || pCsr->iCol>=nCol ){
if( sqlite3Fts5IterEof(pCsr->pIter) ){
pCsr->bEof = 1;
}else{
int nTerm;
zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm);
+ if( pCsr->nLeTerm>=0 ){
+ int nCmp = MIN(nTerm, pCsr->nLeTerm);
+ int bCmp = memcmp(pCsr->zLeTerm, zTerm, nCmp);
+ if( bCmp<0 || (bCmp==0 && pCsr->nLeTerm<nTerm) ){
+ pCsr->bEof = 1;
+ return SQLITE_OK;
+ }
+ }
+
sqlite3Fts5BufferSet(&rc, &pCsr->term, nTerm, (const u8*)zTerm);
- memset(pCsr->aVal, 0, sizeof(pCsr->aVal));
- memset(pCsr->aCnt, 0, pCsr->nCol * sizeof(i64));
- memset(pCsr->aDoc, 0, pCsr->nCol * sizeof(i64));
+ memset(pCsr->aCnt, 0, nCol * sizeof(i64));
+ memset(pCsr->aDoc, 0, nCol * sizeof(i64));
pCsr->iCol = 0;
assert( pTab->eType==FTS5_VOCAB_COL || pTab->eType==FTS5_VOCAB_ROW );
while( rc==SQLITE_OK ){
- i64 dummy;
+ int eDetail = pCsr->pConfig->eDetail;
const u8 *pPos; int nPos; /* Position list */
i64 iPos = 0; /* 64-bit position read from poslist */
int iOff = 0; /* Current offset within position list */
- rc = sqlite3Fts5IterPoslist(pCsr->pIter, 0, &pPos, &nPos, &dummy);
- if( rc==SQLITE_OK ){
- if( pTab->eType==FTS5_VOCAB_ROW ){
- while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
- pCsr->aVal[1]++;
+ pPos = pCsr->pIter->pData;
+ nPos = pCsr->pIter->nData;
+
+ switch( pTab->eType ){
+ case FTS5_VOCAB_ROW:
+ if( eDetail==FTS5_DETAIL_FULL ){
+ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
+ pCsr->aCnt[0]++;
+ }
}
- pCsr->aVal[0]++;
- }else{
- int iCol = -1;
- while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
- int ii = FTS5_POS2COLUMN(iPos);
- pCsr->aCnt[ii]++;
- if( iCol!=ii ){
- pCsr->aDoc[ii]++;
- iCol = ii;
+ pCsr->aDoc[0]++;
+ break;
+
+ case FTS5_VOCAB_COL:
+ if( eDetail==FTS5_DETAIL_FULL ){
+ int iCol = -1;
+ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){
+ int ii = FTS5_POS2COLUMN(iPos);
+ pCsr->aCnt[ii]++;
+ if( iCol!=ii ){
+ if( ii>=nCol ){
+ rc = FTS5_CORRUPT;
+ break;
+ }
+ pCsr->aDoc[ii]++;
+ iCol = ii;
+ }
}
+ }else if( eDetail==FTS5_DETAIL_COLUMNS ){
+ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff,&iPos) ){
+ assert_nc( iPos>=0 && iPos<nCol );
+ if( iPos>=nCol ){
+ rc = FTS5_CORRUPT;
+ break;
+ }
+ pCsr->aDoc[iPos]++;
+ }
+ }else{
+ assert( eDetail==FTS5_DETAIL_NONE );
+ pCsr->aDoc[0]++;
}
- }
+ break;
+
+ default:
+ assert( pTab->eType==FTS5_VOCAB_INSTANCE );
+ break;
+ }
+
+ if( rc==SQLITE_OK ){
rc = sqlite3Fts5IterNextScan(pCsr->pIter);
}
+ if( pTab->eType==FTS5_VOCAB_INSTANCE ) break;
+
if( rc==SQLITE_OK ){
zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm);
- if( nTerm!=pCsr->term.n || memcmp(zTerm, pCsr->term.p, nTerm) ) break;
+ if( nTerm!=pCsr->term.n || memcmp(zTerm, pCsr->term.p, nTerm) ){
+ break;
+ }
if( sqlite3Fts5IterEof(pCsr->pIter) ) break;
}
}
}
}
- if( pCsr->bEof==0 && pTab->eType==FTS5_VOCAB_COL ){
- while( pCsr->aCnt[pCsr->iCol]==0 ) pCsr->iCol++;
- pCsr->aVal[0] = pCsr->iCol;
- pCsr->aVal[1] = pCsr->aDoc[pCsr->iCol];
- pCsr->aVal[2] = pCsr->aCnt[pCsr->iCol];
+ if( rc==SQLITE_OK && pCsr->bEof==0 && pTab->eType==FTS5_VOCAB_COL ){
+ while( pCsr->aDoc[pCsr->iCol]==0 ) pCsr->iCol++;
+ assert( pCsr->iCol<pCsr->pConfig->nCol );
}
return rc;
}
static int fts5VocabFilterMethod(
sqlite3_vtab_cursor *pCursor, /* The cursor used for this query */
int idxNum, /* Strategy index */
- const char *idxStr, /* Unused */
- int nVal, /* Number of elements in apVal */
+ const char *zUnused, /* Unused */
+ int nUnused, /* Number of elements in apVal */
sqlite3_value **apVal /* Arguments for the indexing scheme */
){
+ Fts5VocabTable *pTab = (Fts5VocabTable*)pCursor->pVtab;
Fts5VocabCursor *pCsr = (Fts5VocabCursor*)pCursor;
- int rc;
- const int flags = FTS5INDEX_QUERY_SCAN;
+ int eType = pTab->eType;
+ int rc = SQLITE_OK;
+
+ int iVal = 0;
+ int f = FTS5INDEX_QUERY_SCAN;
+ const char *zTerm = 0;
+ int nTerm = 0;
+
+ sqlite3_value *pEq = 0;
+ sqlite3_value *pGe = 0;
+ sqlite3_value *pLe = 0;
+
+ UNUSED_PARAM2(zUnused, nUnused);
fts5VocabResetCursor(pCsr);
- rc = sqlite3Fts5IndexQuery(pCsr->pIndex, 0, 0, flags, 0, &pCsr->pIter);
+ if( idxNum & FTS5_VOCAB_TERM_EQ ) pEq = apVal[iVal++];
+ if( idxNum & FTS5_VOCAB_TERM_GE ) pGe = apVal[iVal++];
+ if( idxNum & FTS5_VOCAB_TERM_LE ) pLe = apVal[iVal++];
+
+ if( pEq ){
+ zTerm = (const char *)sqlite3_value_text(pEq);
+ nTerm = sqlite3_value_bytes(pEq);
+ f = 0;
+ }else{
+ if( pGe ){
+ zTerm = (const char *)sqlite3_value_text(pGe);
+ nTerm = sqlite3_value_bytes(pGe);
+ }
+ if( pLe ){
+ const char *zCopy = (const char *)sqlite3_value_text(pLe);
+ pCsr->nLeTerm = sqlite3_value_bytes(pLe);
+ pCsr->zLeTerm = sqlite3_malloc(pCsr->nLeTerm+1);
+ if( pCsr->zLeTerm==0 ){
+ rc = SQLITE_NOMEM;
+ }else{
+ memcpy(pCsr->zLeTerm, zCopy, pCsr->nLeTerm+1);
+ }
+ }
+ }
+
if( rc==SQLITE_OK ){
+ rc = sqlite3Fts5IndexQuery(pCsr->pIndex, zTerm, nTerm, f, 0, &pCsr->pIter);
+ }
+ if( rc==SQLITE_OK && eType==FTS5_VOCAB_INSTANCE ){
+ rc = fts5VocabInstanceNewTerm(pCsr);
+ }
+ if( rc==SQLITE_OK
+ && !pCsr->bEof
+ && (eType!=FTS5_VOCAB_INSTANCE || pCsr->pConfig->eDetail!=FTS5_DETAIL_NONE)
+ ){
rc = fts5VocabNextMethod(pCursor);
}
int iCol /* Index of column to read value from */
){
Fts5VocabCursor *pCsr = (Fts5VocabCursor*)pCursor;
- switch( iCol ){
- case 0: /* term */
- sqlite3_result_text(
- pCtx, (const char*)pCsr->term.p, pCsr->term.n, SQLITE_TRANSIENT
- );
- break;
+ int eDetail = pCsr->pConfig->eDetail;
+ int eType = ((Fts5VocabTable*)(pCursor->pVtab))->eType;
+ i64 iVal = 0;
- default:
- assert( iCol<4 && iCol>0 );
- sqlite3_result_int64(pCtx, pCsr->aVal[iCol-1]);
- break;
+ if( iCol==0 ){
+ sqlite3_result_text(
+ pCtx, (const char*)pCsr->term.p, pCsr->term.n, SQLITE_TRANSIENT
+ );
+ }else if( eType==FTS5_VOCAB_COL ){
+ assert( iCol==1 || iCol==2 || iCol==3 );
+ if( iCol==1 ){
+ if( eDetail!=FTS5_DETAIL_NONE ){
+ const char *z = pCsr->pConfig->azCol[pCsr->iCol];
+ sqlite3_result_text(pCtx, z, -1, SQLITE_STATIC);
+ }
+ }else if( iCol==2 ){
+ iVal = pCsr->aDoc[pCsr->iCol];
+ }else{
+ iVal = pCsr->aCnt[pCsr->iCol];
+ }
+ }else if( eType==FTS5_VOCAB_ROW ){
+ assert( iCol==1 || iCol==2 );
+ if( iCol==1 ){
+ iVal = pCsr->aDoc[0];
+ }else{
+ iVal = pCsr->aCnt[0];
+ }
+ }else{
+ assert( eType==FTS5_VOCAB_INSTANCE );
+ switch( iCol ){
+ case 1:
+ sqlite3_result_int64(pCtx, pCsr->pIter->iRowid);
+ break;
+ case 2: {
+ int ii = -1;
+ if( eDetail==FTS5_DETAIL_FULL ){
+ ii = FTS5_POS2COLUMN(pCsr->iInstPos);
+ }else if( eDetail==FTS5_DETAIL_COLUMNS ){
+ ii = (int)pCsr->iInstPos;
+ }
+ if( ii>=0 && ii<pCsr->pConfig->nCol ){
+ const char *z = pCsr->pConfig->azCol[ii];
+ sqlite3_result_text(pCtx, z, -1, SQLITE_STATIC);
+ }
+ break;
+ }
+ default: {
+ assert( iCol==3 );
+ if( eDetail==FTS5_DETAIL_FULL ){
+ int ii = FTS5_POS2OFFSET(pCsr->iInstPos);
+ sqlite3_result_int(pCtx, ii);
+ }
+ break;
+ }
+ }
}
+
+ if( iVal>0 ) sqlite3_result_int64(pCtx, iVal);
return SQLITE_OK;
}
#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5) */
/************** End of fts5.c ************************************************/
+/************** Begin file stmt.c ********************************************/
+/*
+** 2017-05-31
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+**
+** This file demonstrates an eponymous virtual table that returns information
+** about all prepared statements for the database connection.
+**
+** Usage example:
+**
+** .load ./stmt
+** .mode line
+** .header on
+** SELECT * FROM stmt;
+*/
+#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB)
+#if !defined(SQLITEINT_H)
+/* #include "sqlite3ext.h" */
+#endif
+SQLITE_EXTENSION_INIT1
+/* #include <assert.h> */
+/* #include <string.h> */
+
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+
+/* stmt_vtab is a subclass of sqlite3_vtab which will
+** serve as the underlying representation of a stmt virtual table
+*/
+typedef struct stmt_vtab stmt_vtab;
+struct stmt_vtab {
+ sqlite3_vtab base; /* Base class - must be first */
+ sqlite3 *db; /* Database connection for this stmt vtab */
+};
+
+/* stmt_cursor is a subclass of sqlite3_vtab_cursor which will
+** serve as the underlying representation of a cursor that scans
+** over rows of the result
+*/
+typedef struct stmt_cursor stmt_cursor;
+struct stmt_cursor {
+ sqlite3_vtab_cursor base; /* Base class - must be first */
+ sqlite3 *db; /* Database connection for this cursor */
+ sqlite3_stmt *pStmt; /* Statement cursor is currently pointing at */
+ sqlite3_int64 iRowid; /* The rowid */
+};
+
+/*
+** The stmtConnect() method is invoked to create a new
+** stmt_vtab that describes the stmt virtual table.
+**
+** Think of this routine as the constructor for stmt_vtab objects.
+**
+** All this routine needs to do is:
+**
+** (1) Allocate the stmt_vtab object and initialize all fields.
+**
+** (2) Tell SQLite (via the sqlite3_declare_vtab() interface) what the
+** result set of queries against stmt will look like.
+*/
+static int stmtConnect(
+ sqlite3 *db,
+ void *pAux,
+ int argc, const char *const*argv,
+ sqlite3_vtab **ppVtab,
+ char **pzErr
+){
+ stmt_vtab *pNew;
+ int rc;
+
+/* Column numbers */
+#define STMT_COLUMN_SQL 0 /* SQL for the statement */
+#define STMT_COLUMN_NCOL 1 /* Number of result columns */
+#define STMT_COLUMN_RO 2 /* True if read-only */
+#define STMT_COLUMN_BUSY 3 /* True if currently busy */
+#define STMT_COLUMN_NSCAN 4 /* SQLITE_STMTSTATUS_FULLSCAN_STEP */
+#define STMT_COLUMN_NSORT 5 /* SQLITE_STMTSTATUS_SORT */
+#define STMT_COLUMN_NAIDX 6 /* SQLITE_STMTSTATUS_AUTOINDEX */
+#define STMT_COLUMN_NSTEP 7 /* SQLITE_STMTSTATUS_VM_STEP */
+#define STMT_COLUMN_REPREP 8 /* SQLITE_STMTSTATUS_REPREPARE */
+#define STMT_COLUMN_RUN 9 /* SQLITE_STMTSTATUS_RUN */
+#define STMT_COLUMN_MEM 10 /* SQLITE_STMTSTATUS_MEMUSED */
+
+
+ rc = sqlite3_declare_vtab(db,
+ "CREATE TABLE x(sql,ncol,ro,busy,nscan,nsort,naidx,nstep,"
+ "reprep,run,mem)");
+ if( rc==SQLITE_OK ){
+ pNew = sqlite3_malloc( sizeof(*pNew) );
+ *ppVtab = (sqlite3_vtab*)pNew;
+ if( pNew==0 ) return SQLITE_NOMEM;
+ memset(pNew, 0, sizeof(*pNew));
+ pNew->db = db;
+ }
+ return rc;
+}
+
+/*
+** This method is the destructor for stmt_cursor objects.
+*/
+static int stmtDisconnect(sqlite3_vtab *pVtab){
+ sqlite3_free(pVtab);
+ return SQLITE_OK;
+}
+
+/*
+** Constructor for a new stmt_cursor object.
+*/
+static int stmtOpen(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){
+ stmt_cursor *pCur;
+ pCur = sqlite3_malloc( sizeof(*pCur) );
+ if( pCur==0 ) return SQLITE_NOMEM;
+ memset(pCur, 0, sizeof(*pCur));
+ pCur->db = ((stmt_vtab*)p)->db;
+ *ppCursor = &pCur->base;
+ return SQLITE_OK;
+}
+
+/*
+** Destructor for a stmt_cursor.
+*/
+static int stmtClose(sqlite3_vtab_cursor *cur){
+ sqlite3_free(cur);
+ return SQLITE_OK;
+}
+
+
+/*
+** Advance a stmt_cursor to its next row of output.
+*/
+static int stmtNext(sqlite3_vtab_cursor *cur){
+ stmt_cursor *pCur = (stmt_cursor*)cur;
+ pCur->iRowid++;
+ pCur->pStmt = sqlite3_next_stmt(pCur->db, pCur->pStmt);
+ return SQLITE_OK;
+}
+
+/*
+** Return values of columns for the row at which the stmt_cursor
+** is currently pointing.
+*/
+static int stmtColumn(
+ sqlite3_vtab_cursor *cur, /* The cursor */
+ sqlite3_context *ctx, /* First argument to sqlite3_result_...() */
+ int i /* Which column to return */
+){
+ stmt_cursor *pCur = (stmt_cursor*)cur;
+ switch( i ){
+ case STMT_COLUMN_SQL: {
+ sqlite3_result_text(ctx, sqlite3_sql(pCur->pStmt), -1, SQLITE_TRANSIENT);
+ break;
+ }
+ case STMT_COLUMN_NCOL: {
+ sqlite3_result_int(ctx, sqlite3_column_count(pCur->pStmt));
+ break;
+ }
+ case STMT_COLUMN_RO: {
+ sqlite3_result_int(ctx, sqlite3_stmt_readonly(pCur->pStmt));
+ break;
+ }
+ case STMT_COLUMN_BUSY: {
+ sqlite3_result_int(ctx, sqlite3_stmt_busy(pCur->pStmt));
+ break;
+ }
+ case STMT_COLUMN_MEM: {
+ i = SQLITE_STMTSTATUS_MEMUSED +
+ STMT_COLUMN_NSCAN - SQLITE_STMTSTATUS_FULLSCAN_STEP;
+ /* Fall thru */
+ }
+ case STMT_COLUMN_NSCAN:
+ case STMT_COLUMN_NSORT:
+ case STMT_COLUMN_NAIDX:
+ case STMT_COLUMN_NSTEP:
+ case STMT_COLUMN_REPREP:
+ case STMT_COLUMN_RUN: {
+ sqlite3_result_int(ctx, sqlite3_stmt_status(pCur->pStmt,
+ i-STMT_COLUMN_NSCAN+SQLITE_STMTSTATUS_FULLSCAN_STEP, 0));
+ break;
+ }
+ }
+ return SQLITE_OK;
+}
+
+/*
+** Return the rowid for the current row. In this implementation, the
+** rowid is the same as the output value.
+*/
+static int stmtRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){
+ stmt_cursor *pCur = (stmt_cursor*)cur;
+ *pRowid = pCur->iRowid;
+ return SQLITE_OK;
+}
+
+/*
+** Return TRUE if the cursor has been moved off of the last
+** row of output.
+*/
+static int stmtEof(sqlite3_vtab_cursor *cur){
+ stmt_cursor *pCur = (stmt_cursor*)cur;
+ return pCur->pStmt==0;
+}
+
+/*
+** This method is called to "rewind" the stmt_cursor object back
+** to the first row of output. This method is always called at least
+** once prior to any call to stmtColumn() or stmtRowid() or
+** stmtEof().
+*/
+static int stmtFilter(
+ sqlite3_vtab_cursor *pVtabCursor,
+ int idxNum, const char *idxStr,
+ int argc, sqlite3_value **argv
+){
+ stmt_cursor *pCur = (stmt_cursor *)pVtabCursor;
+ pCur->pStmt = 0;
+ pCur->iRowid = 0;
+ return stmtNext(pVtabCursor);
+}
+
+/*
+** SQLite will invoke this method one or more times while planning a query
+** that uses the stmt virtual table. This routine needs to create
+** a query plan for each invocation and compute an estimated cost for that
+** plan.
+*/
+static int stmtBestIndex(
+ sqlite3_vtab *tab,
+ sqlite3_index_info *pIdxInfo
+){
+ pIdxInfo->estimatedCost = (double)500;
+ pIdxInfo->estimatedRows = 500;
+ return SQLITE_OK;
+}
+
+/*
+** This following structure defines all the methods for the
+** stmt virtual table.
+*/
+static sqlite3_module stmtModule = {
+ 0, /* iVersion */
+ 0, /* xCreate */
+ stmtConnect, /* xConnect */
+ stmtBestIndex, /* xBestIndex */
+ stmtDisconnect, /* xDisconnect */
+ 0, /* xDestroy */
+ stmtOpen, /* xOpen - open a cursor */
+ stmtClose, /* xClose - close a cursor */
+ stmtFilter, /* xFilter - configure scan constraints */
+ stmtNext, /* xNext - advance a cursor */
+ stmtEof, /* xEof - check for end of scan */
+ stmtColumn, /* xColumn - read data */
+ stmtRowid, /* xRowid - read data */
+ 0, /* xUpdate */
+ 0, /* xBegin */
+ 0, /* xSync */
+ 0, /* xCommit */
+ 0, /* xRollback */
+ 0, /* xFindMethod */
+ 0, /* xRename */
+ 0, /* xSavepoint */
+ 0, /* xRelease */
+ 0, /* xRollbackTo */
+};
+
+#endif /* SQLITE_OMIT_VIRTUALTABLE */
+
+SQLITE_PRIVATE int sqlite3StmtVtabInit(sqlite3 *db){
+ int rc = SQLITE_OK;
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ rc = sqlite3_create_module(db, "sqlite_stmt", &stmtModule, 0);
+#endif
+ return rc;
+}
+
+#ifndef SQLITE_CORE
+#ifdef _WIN32
+__declspec(dllexport)
+#endif
+SQLITE_API int sqlite3_stmt_init(
+ sqlite3 *db,
+ char **pzErrMsg,
+ const sqlite3_api_routines *pApi
+){
+ int rc = SQLITE_OK;
+ SQLITE_EXTENSION_INIT2(pApi);
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ rc = sqlite3StmtVtabInit(db);
+#endif
+ return rc;
+}
+#endif /* SQLITE_CORE */
+#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */
+
+/************** End of stmt.c ************************************************/
+#if __LINE__!=209832
+#undef SQLITE_SOURCE_ID
+#define SQLITE_SOURCE_ID "2018-04-02 11:04:16 736b53f57f70b23172c30880186dce7ad9baa3b74e3838cae5847cffb98falt2"
+#endif
+/* Return the source-id for this library */
+SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; }
+/************************** End of sqlite3.c ******************************/