#include "mapgen_v5.h"
#include "mapgen_v6.h"
#include "mapgen_v7.h"
+#include "mg_biome.h"
#include "cavegen.h"
-NoiseParams nparams_caveliquids(0, 1, v3f(150.0, 150.0, 150.0), 776, 3, 0.6, 2.0);
+static NoiseParams nparams_caveliquids(0, 1, v3f(150.0, 150.0, 150.0), 776, 3, 0.6, 2.0);
+
+
+////
+//// CavesNoiseIntersection
+////
+
+CavesNoiseIntersection::CavesNoiseIntersection(
+ INodeDefManager *nodedef, BiomeManager *biomemgr, v3s16 chunksize,
+ NoiseParams *np_cave1, NoiseParams *np_cave2, s32 seed, float cave_width)
+{
+ assert(nodedef);
+ assert(biomemgr);
+
+ m_ndef = nodedef;
+ m_bmgr = biomemgr;
+
+ m_csize = chunksize;
+ m_cave_width = cave_width;
+
+ m_ystride = m_csize.X;
+ m_zstride_1d = m_csize.X * (m_csize.Y + 1);
+
+ // Noises are created using 1-down overgeneration
+ // A Nx-by-1-by-Nz-sized plane is at the bottom of the desired for
+ // re-carving the solid overtop placed for blocking sunlight
+ noise_cave1 = new Noise(np_cave1, seed, m_csize.X, m_csize.Y + 1, m_csize.Z);
+ noise_cave2 = new Noise(np_cave2, seed, m_csize.X, m_csize.Y + 1, m_csize.Z);
+}
+
+
+CavesNoiseIntersection::~CavesNoiseIntersection()
+{
+ delete noise_cave1;
+ delete noise_cave2;
+}
+
+
+void CavesNoiseIntersection::generateCaves(MMVManip *vm,
+ v3s16 nmin, v3s16 nmax, u8 *biomemap)
+{
+ assert(vm);
+ assert(biomemap);
+
+ noise_cave1->perlinMap3D(nmin.X, nmin.Y - 1, nmin.Z);
+ noise_cave2->perlinMap3D(nmin.X, nmin.Y - 1, nmin.Z);
+
+ v3s16 em = vm->m_area.getExtent();
+ u32 index2d = 0;
+
+ for (s16 z = nmin.Z; z <= nmax.Z; z++)
+ for (s16 x = nmin.X; x <= nmax.X; x++, index2d++) {
+ bool column_is_open = false; // Is column open to overground
+ bool is_tunnel = false; // Is tunnel or tunnel floor
+ u32 vi = vm->m_area.index(x, nmax.Y, z);
+ u32 index3d = (z - nmin.Z) * m_zstride_1d + m_csize.Y * m_ystride +
+ (x - nmin.X);
+ // Biome of column
+ Biome *biome = (Biome *)m_bmgr->getRaw(biomemap[index2d]);
+
+ // Don't excavate the overgenerated stone at nmax.Y + 1,
+ // this creates a 'roof' over the tunnel, preventing light in
+ // tunnels at mapchunk borders when generating mapchunks upwards.
+ // This 'roof' is removed when the mapchunk above is generated.
+ for (s16 y = nmax.Y; y >= nmin.Y - 1; y--,
+ index3d -= m_ystride,
+ vm->m_area.add_y(em, vi, -1)) {
+
+ content_t c = vm->m_data[vi].getContent();
+ if (c == CONTENT_AIR || c == biome->c_water_top ||
+ c == biome->c_water) {
+ column_is_open = true;
+ continue;
+ }
+ // Ground
+ float d1 = contour(noise_cave1->result[index3d]);
+ float d2 = contour(noise_cave2->result[index3d]);
+
+ if (d1 * d2 > m_cave_width && m_ndef->get(c).is_ground_content) {
+ // In tunnel and ground content, excavate
+ vm->m_data[vi] = MapNode(CONTENT_AIR);
+ is_tunnel = true;
+ } else {
+ // Not in tunnel or not ground content
+ if (is_tunnel && column_is_open &&
+ (c == biome->c_filler || c == biome->c_stone))
+ // Tunnel entrance floor
+ vm->m_data[vi] = MapNode(biome->c_top);
+
+ column_is_open = false;
+ is_tunnel = false;
+ }
+ }
+ }
+}
+
////
//// CavesRandomWalk
CavesRandomWalk::CavesRandomWalk(
INodeDefManager *ndef,
GenerateNotifier *gennotify,
- int seed,
+ s32 seed,
int water_level,
content_t water_source,
content_t lava_source)
void CavesRandomWalk::makeCave(MMVManip *vm, v3s16 nmin, v3s16 nmax,
- PseudoRandom *ps, int max_stone_height, s16 *heightmap)
+ PseudoRandom *ps, bool is_large_cave, int max_stone_height, s16 *heightmap)
{
assert(vm);
assert(ps);
- this->vm = vm;
- this->ps = ps;
- this->node_min = nmin;
- this->node_max = nmax;
- this->heightmap = heightmap;
+ this->vm = vm;
+ this->ps = ps;
+ this->node_min = nmin;
+ this->node_max = nmax;
+ this->heightmap = heightmap;
+ this->large_cave = is_large_cave;
this->ystride = nmax.X - nmin.X + 1;
// Set initial parameters from randomness
- dswitchint = ps->range(1, 14);
- flooded = ps->range(1, 2) == 2;
+ int dswitchint = ps->range(1, 14);
+ flooded = ps->range(1, 2) == 2;
- part_max_length_rs = ps->range(2, 4);
- tunnel_routepoints = ps->range(5, ps->range(15, 30));
- min_tunnel_diameter = 5;
- max_tunnel_diameter = ps->range(7, ps->range(8, 24));
+ if (large_cave) {
+ part_max_length_rs = ps->range(2, 4);
+ tunnel_routepoints = ps->range(5, ps->range(15, 30));
+ min_tunnel_diameter = 5;
+ max_tunnel_diameter = ps->range(7, ps->range(8, 24));
+ } else {
+ part_max_length_rs = ps->range(2, 9);
+ tunnel_routepoints = ps->range(10, ps->range(15, 30));
+ min_tunnel_diameter = 2;
+ max_tunnel_diameter = ps->range(2, 6);
+ }
large_cave_is_flat = (ps->range(0, 1) == 0);
// Allow a bit more
//(this should be more than the maximum radius of the tunnel)
- s16 insure = 10;
+ const s16 insure = 10;
s16 more = MYMAX(MAP_BLOCKSIZE - max_tunnel_diameter / 2 - insure, 1);
- ar += v3s16(1,0,1) * more * 2;
- of -= v3s16(1,0,1) * more;
+ ar += v3s16(1, 0, 1) * more * 2;
+ of -= v3s16(1, 0, 1) * more;
route_y_min = 0;
// Allow half a diameter + 7 over stone surface
// Limit maximum to area
route_y_max = rangelim(route_y_max, 0, ar.Y - 1);
- s16 minpos = 0;
- if (node_min.Y < water_level && node_max.Y > water_level) {
- minpos = water_level - max_tunnel_diameter / 3 - of.Y;
- route_y_max = water_level + max_tunnel_diameter / 3 - of.Y;
+ if (large_cave) {
+ s16 minpos = 0;
+ if (node_min.Y < water_level && node_max.Y > water_level) {
+ minpos = water_level - max_tunnel_diameter / 3 - of.Y;
+ route_y_max = water_level + max_tunnel_diameter / 3 - of.Y;
+ }
+ route_y_min = ps->range(minpos, minpos + max_tunnel_diameter);
+ route_y_min = rangelim(route_y_min, 0, route_y_max);
}
- route_y_min = ps->range(minpos, minpos + max_tunnel_diameter);
- route_y_min = rangelim(route_y_min, 0, route_y_max);
s16 route_start_y_min = route_y_min;
s16 route_start_y_max = route_y_max;
route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);
// Randomize starting position
- orp = v3f(
- (float)(ps->next() % ar.X) + 0.5,
- (float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
- (float)(ps->next() % ar.Z) + 0.5
- );
+ orp.Z = (float)(ps->next() % ar.Z) + 0.5f;
+ orp.Y = (float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5f;
+ orp.X = (float)(ps->next() % ar.X) + 0.5f;
// Add generation notify begin event
if (gennotify) {
v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
- GenNotifyType notifytype = GENNOTIFY_LARGECAVE_BEGIN;
+ GenNotifyType notifytype = large_cave ?
+ GENNOTIFY_LARGECAVE_BEGIN : GENNOTIFY_CAVE_BEGIN;
gennotify->addEvent(notifytype, abs_pos);
}
// Add generation notify end event
if (gennotify) {
v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
- GenNotifyType notifytype = GENNOTIFY_LARGECAVE_END;
+ GenNotifyType notifytype = large_cave ?
+ GENNOTIFY_LARGECAVE_END : GENNOTIFY_CAVE_END;
gennotify->addEvent(notifytype, abs_pos);
}
}
void CavesRandomWalk::makeTunnel(bool dirswitch)
{
+ if (dirswitch && !large_cave) {
+ main_direction.Z = ((float)(ps->next() % 20) - (float)10) / 10;
+ main_direction.Y = ((float)(ps->next() % 20) - (float)10) / 30;
+ main_direction.X = ((float)(ps->next() % 20) - (float)10) / 10;
+
+ main_direction *= (float)ps->range(0, 10) / 10;
+ }
+
// Randomize size
s16 min_d = min_tunnel_diameter;
s16 max_d = max_tunnel_diameter;
s16 rs_part_max_length_rs = rs * part_max_length_rs;
v3s16 maxlen;
- maxlen = v3s16(
- rs_part_max_length_rs,
- rs_part_max_length_rs / 2,
- rs_part_max_length_rs
- );
+ if (large_cave) {
+ maxlen = v3s16(
+ rs_part_max_length_rs,
+ rs_part_max_length_rs / 2,
+ rs_part_max_length_rs
+ );
+ } else {
+ maxlen = v3s16(
+ rs_part_max_length_rs,
+ ps->range(1, rs_part_max_length_rs),
+ rs_part_max_length_rs
+ );
+ }
v3f vec;
// Jump downward sometimes
- vec = v3f(
- (float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
- (float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
- (float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
- );
+ if (!large_cave && ps->range(0, 12) == 0) {
+ vec.Z = (float)(ps->next() % (maxlen.Z * 1)) - (float)maxlen.Z / 2;
+ vec.Y = (float)(ps->next() % (maxlen.Y * 2)) - (float)maxlen.Y;
+ vec.X = (float)(ps->next() % (maxlen.X * 1)) - (float)maxlen.X / 2;
+ } else {
+ vec.Z = (float)(ps->next() % (maxlen.Z * 1)) - (float)maxlen.Z / 2;
+ vec.Y = (float)(ps->next() % (maxlen.Y * 1)) - (float)maxlen.Y / 2;
+ vec.X = (float)(ps->next() % (maxlen.X * 1)) - (float)maxlen.X / 2;
+ }
// Do not make caves that are above ground.
// It is only necessary to check the startpoint and endpoint.
vec = rp - orp;
float veclen = vec.getLength();
- if (veclen < 0.05)
- veclen = 1.0;
+ if (veclen < 0.05f)
+ veclen = 1.0f;
// Every second section is rough
bool randomize_xz = (ps->range(1, 2) == 1);
// Carve routes
- for (float f = 0; f < 1.0; f += 1.0 / veclen)
+ for (float f = 0.f; f < 1.0f; f += 1.0f / veclen)
carveRoute(vec, f, randomize_xz);
orp = rp;
float nval = NoisePerlin3D(np_caveliquids, startp.X,
startp.Y, startp.Z, seed);
- MapNode liquidnode = (nval < 0.40 && node_max.Y < lava_depth) ?
+ MapNode liquidnode = (nval < 0.40f && node_max.Y < lava_depth) ?
lavanode : waternode;
v3f fp = orp + vec * f;
- fp.X += 0.1 * ps->range(-10, 10);
- fp.Z += 0.1 * ps->range(-10, 10);
+ fp.X += 0.1f * ps->range(-10, 10);
+ fp.Z += 0.1f * ps->range(-10, 10);
v3s16 cp(fp.X, fp.Y, fp.Z);
- s16 d0 = -rs/2;
+ s16 d0 = -rs / 2;
s16 d1 = d0 + rs;
if (randomize_xz) {
d0 += ps->range(-1, 1);
d1 += ps->range(-1, 1);
}
+ bool flat_cave_floor = !large_cave && ps->range(0, 2) == 2;
+
for (s16 z0 = d0; z0 <= d1; z0++) {
s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);
for (s16 y0 = -si2; y0 <= si2; y0++) {
+ // Make better floors in small caves
+ if (flat_cave_floor && y0 <= -rs / 2 && rs <= 7)
+ continue;
+
if (large_cave_is_flat) {
// Make large caves not so tall
if (rs > 7 && abs(y0) >= rs / 3)
if (!ndef->get(c).is_ground_content)
continue;
- int full_ymin = node_min.Y - MAP_BLOCKSIZE;
- int full_ymax = node_max.Y + MAP_BLOCKSIZE;
+ if (large_cave) {
+ int full_ymin = node_min.Y - MAP_BLOCKSIZE;
+ int full_ymax = node_max.Y + MAP_BLOCKSIZE;
+
+ if (flooded && full_ymin < water_level && full_ymax > water_level)
+ vm->m_data[i] = (p.Y <= water_level) ? waternode : airnode;
+ else if (flooded && full_ymax < water_level)
+ vm->m_data[i] = (p.Y < startp.Y - 4) ? liquidnode : airnode;
+ else
+ vm->m_data[i] = airnode;
+ } else {
+ if (c == CONTENT_IGNORE)
+ continue;
- if (flooded && full_ymin < water_level && full_ymax > water_level)
- vm->m_data[i] = (p.Y <= water_level) ? waternode : airnode;
- else if (flooded && full_ymax < water_level)
- vm->m_data[i] = (p.Y < startp.Y - 4) ? liquidnode : airnode;
- else
vm->m_data[i] = airnode;
+ vm->m_flags[i] |= VMANIP_FLAG_CAVE;
+ }
}
}
}
// Set initial parameters from randomness
min_tunnel_diameter = 2;
max_tunnel_diameter = ps->range(2, 6);
- dswitchint = ps->range(1, 14);
+ int dswitchint = ps->range(1, 14);
if (large_cave) {
part_max_length_rs = ps->range(2, 4);
tunnel_routepoints = ps->range(5, ps->range(15, 30));
// Allow a bit more
//(this should be more than the maximum radius of the tunnel)
const s16 max_spread_amount = MAP_BLOCKSIZE;
- s16 insure = 10;
+ const s16 insure = 10;
s16 more = MYMAX(max_spread_amount - max_tunnel_diameter / 2 - insure, 1);
ar += v3s16(1, 0, 1) * more * 2;
of -= v3s16(1, 0, 1) * more;
route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);
// Randomize starting position
- orp = v3f(
- (float)(ps->next() % ar.X) + 0.5,
- (float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
- (float)(ps->next() % ar.Z) + 0.5
- );
+ orp.Z = (float)(ps->next() % ar.Z) + 0.5f;
+ orp.Y = (float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5f;
+ orp.X = (float)(ps->next() % ar.X) + 0.5f;
// Add generation notify begin event
if (gennotify != NULL) {
void CavesV6::makeTunnel(bool dirswitch)
{
if (dirswitch && !large_cave) {
- main_direction = v3f(
- ((float)(ps->next() % 20) - (float)10) / 10,
- ((float)(ps->next() % 20) - (float)10) / 30,
- ((float)(ps->next() % 20) - (float)10) / 10
- );
+ main_direction.Z = ((float)(ps->next() % 20) - (float)10) / 10;
+ main_direction.Y = ((float)(ps->next() % 20) - (float)10) / 30;
+ main_direction.X = ((float)(ps->next() % 20) - (float)10) / 10;
+
main_direction *= (float)ps->range(0, 10) / 10;
}
);
}
- v3f vec(
- (float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
- (float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
- (float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
- );
+ v3f vec;
+ vec.Z = (float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2;
+ vec.Y = (float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2;
+ vec.X = (float)(ps->next() % maxlen.X) - (float)maxlen.X / 2;
// Jump downward sometimes
if (!large_cave && ps->range(0, 12) == 0) {
- vec = v3f(
- (float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
- (float)(ps->next() % (maxlen.Y * 2)) - (float)maxlen.Y,
- (float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
- );
+ vec.Z = (float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2;
+ vec.Y = (float)(ps->next() % (maxlen.Y * 2)) - (float)maxlen.Y;
+ vec.X = (float)(ps->next() % maxlen.X) - (float)maxlen.X / 2;
}
// Do not make caves that are entirely above ground, to fix shadow bugs
float veclen = vec.getLength();
// As odd as it sounds, veclen is *exactly* 0.0 sometimes, causing a FPE
- if (veclen < 0.05)
- veclen = 1.0;
+ if (veclen < 0.05f)
+ veclen = 1.0f;
// Every second section is rough
bool randomize_xz = (ps2->range(1, 2) == 1);
// Carve routes
- for (float f = 0; f < 1.0; f += 1.0 / veclen)
+ for (float f = 0.f; f < 1.0f; f += 1.0f / veclen)
carveRoute(vec, f, randomize_xz, tunnel_above_ground);
orp = rp;
startp += of;
v3f fp = orp + vec * f;
- fp.X += 0.1 * ps->range(-10, 10);
- fp.Z += 0.1 * ps->range(-10, 10);
+ fp.X += 0.1f * ps->range(-10, 10);
+ fp.Z += 0.1f * ps->range(-10, 10);
v3s16 cp(fp.X, fp.Y, fp.Z);
s16 d0 = -rs / 2;
projects / dragonfireclient.git / blobdiff