$!
$! In case of problems with the install you might contact me at
$! zinser@zinser.no-ip.info(preferred) or
-$! zinser@sysdev.deutsche-boerse.com (work)
+$! martin.zinser@eurexchange.com (work)
$!
$! Make procedure history for Zlib
$!
$! 0.02 20061008 Adapt to new Makefile.in
$! 0.03 20091224 Add support for large file check
$! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
+$! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
+$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
+$! subdir path, update module search in makefile.in
+$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
+$! shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$! image
+$! 0.09 20120305 SMS. P1 sets builder ("MMK", "MMS", " " (built-in)).
+$! "" -> automatic, preference: MMK, MMS, built-in.
$!
$ on error then goto err_exit
$!
$!
$! Setup variables holding "config" information
$!
-$ Make = ""
+$ Make = "''p1'"
$ name = "Zlib"
$ version = "?.?.?"
$ v_string = "ZLIB_VERSION"
$ v_file = "zlib.h"
-$ ccopt = ""
+$ ccopt = "/include = []"
$ lopts = ""
$ dnsrl = ""
-$ aconf_in_file = "config.hin"
+$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
$ conf_check_string = ""
$ linkonly = false
$ optfile = name + ".opt"
-$ libdefs = ""
+$ mapfile = name + ".map"
+$ libdefs = ""
+$ vax = f$getsyi("HW_MODEL").lt.1024
$ axp = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
+$ ia64 = f$getsyi("HW_MODEL").ge.4096
$!
-$ whoami = f$parse(f$enviornment("Procedure"),,,,"NO_CONCEAL")
+$! 2012-03-05 SMS.
+$! Why is this needed? And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
$ mydef = F$parse(whoami,,,"DEVICE")
$ mydir = f$parse(whoami,,,"DIRECTORY") - "]["
$ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
$!
$! Check for MMK/MMS
$!
-$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
-$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
-$!
+$ if (Make .eqs. "")
+$ then
+$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ else
+$ Make = f$edit( Make, "trim")
+$ endif
$!
$ gosub find_version
$!
$!
$ gosub check_compiler
$ close topt
+$ close optf
$!
$ if its_decc
$ then
$ define sys decc$library_include:
$ endif
$ endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS? Why not simply ".not. vax"? And why not on VAX?
+$!
+$ if axp .or. ia64
+$ then
+$ ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
+$ s_case = true
+$ endif
$ endif
$ if its_vaxc .or. its_gnuc
$ then
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
$ endif
$!
-$! Build a fake configure input header
+$! Build a fake configure input header
$!
$ open/write conf_hin config.hin
$ write conf_hin "#undef _LARGEFILE64_SOURCE"
$ fname = f$element(i,"#",aconf_in_file)
$ if fname .eqs. "#" then goto AMISS_ERR
$ if f$search(fname) .eqs. ""
-$ then
+$ then
$ i = i + 1
$ goto find_aconf
$ endif
$ open/read/err=aconf_err aconf_in 'fname'
-$ open/write aconf zlibdefs.h
+$ open/write aconf zconf.h
$ACONF_LOOP:
$ read/end_of_file=aconf_exit aconf_in line
$ work = f$edit(line, "compress,trim")
$ if f$extract(0,6,work) .nes. "#undef"
$ then
-$ write aconf line
+$ if f$extract(0,12,work) .nes. "#cmakedefine"
+$ then
+$ write aconf line
+$ endif
$ else
$ cdef = f$element(1," ",work)
$ gosub check_config
$ endif
$ goto aconf_loop
$ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
$ write aconf "#define VMS 1"
$ write aconf "#include <unistd.h>"
$ write aconf "#include <unixio.h>"
$ write aconf "#ifdef _LARGEFILE"
-$ write aconf "#define off64_t __off64_t"
-$ write aconf "#define fopen64 fopen"
-$ write aconf "#define fseeko64 fseeko"
-$ write aconf "#define lseek64 lseek"
-$ write aconf "#define ftello64 ftell"
+$ write aconf "# define off64_t __off64_t"
+$ write aconf "# define fopen64 fopen"
+$ write aconf "# define fseeko64 fseeko"
+$ write aconf "# define lseek64 lseek"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
$ write aconf "#endif"
$ close aconf_in
$ close aconf
-$ delete 'th';*
+$ if f$search("''th'") .nes. "" then delete 'th';*
$! Build the thing plain or with mms
$!
$ write sys$output "Compiling Zlib sources ..."
$ if make.eqs.""
-$ then
-$ dele example.obj;*,minigzip.obj;*
+$ then
+$ if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$ if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
- adler32.c zlib.h zconf.h zlibdefs.h
+ adler32.c zlib.h zconf.h
$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
- compress.c zlib.h zconf.h zlibdefs.h
+ compress.c zlib.h zconf.h
$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
- crc32.c zlib.h zconf.h zlibdefs.h
+ crc32.c zlib.h zconf.h
$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
- deflate.c deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+ deflate.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE gzclose.OBJ "CC ''CCOPT' gzclose" -
- gzclose.c zutil.h zlib.h zconf.h zlibdefs.h
-$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
- gzio.c zutil.h zlib.h zconf.h zlibdefs.h
+ gzclose.c zutil.h zlib.h zconf.h
$ CALL MAKE gzlib.OBJ "CC ''CCOPT' gzlib" -
- gzlib.c zutil.h zlib.h zconf.h zlibdefs.h
+ gzlib.c zutil.h zlib.h zconf.h
$ CALL MAKE gzread.OBJ "CC ''CCOPT' gzread" -
- gzread.c zutil.h zlib.h zconf.h zlibdefs.h
+ gzread.c zutil.h zlib.h zconf.h
$ CALL MAKE gzwrite.OBJ "CC ''CCOPT' gzwrite" -
- gzwrite.c zutil.h zlib.h zconf.h zlibdefs.h
+ gzwrite.c zutil.h zlib.h zconf.h
$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
- inffast.c zutil.h zlib.h zconf.h zlibdefs.h inffast.h
+ inffast.c zutil.h zlib.h zconf.h inffast.h
$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
- inflate.c zutil.h zlib.h zconf.h zlibdefs.h infblock.h
+ inflate.c zutil.h zlib.h zconf.h infblock.h
$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
- inftrees.c zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
+ inftrees.c zutil.h zlib.h zconf.h inftrees.h
$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
- trees.c deflate.h zutil.h zlib.h zconf.h zlibdefs.h
+ trees.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
- uncompr.c zlib.h zconf.h zlibdefs.h
+ uncompr.c zlib.h zconf.h
$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
- zutil.c zutil.h zlib.h zconf.h zlibdefs.h
+ zutil.c zutil.h zlib.h zconf.h
$ write sys$output "Building Zlib ..."
$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
$ write sys$output "Building example..."
-$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
- example.c zlib.h zconf.h zlibdefs.h
+$ CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
+ [.test]example.c zlib.h zconf.h
$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$ if f$search("x11vms:xvmsutils.olb") .nes. ""
-$ then
-$ write sys$output "Building minigzip..."
-$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
- minigzip.c zlib.h zconf.h zlibdefs.h
-$ call make minigzip.exe -
- "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
- minigzip.obj libz.olb
-$ endif
-$ else
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
+ [.test]minigzip.c zlib.h zconf.h
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib" -
+ minigzip.obj libz.olb
+$ else
$ gosub crea_mms
$ write sys$output "Make ''name' ''version' with ''Make' "
$ 'make'
-$ endif
+$ endif
$!
-$! Alpha gets a shareable image
+$! Create shareable image
$!
-$ If axp
-$ Then
-$ gosub crea_olist
-$ write sys$output "Creating libzshr.exe"
-$ call anal_obj_axp modules.opt _link.opt
-$ if s_case
-$ then
-$ open/append optf modules.opt
-$ write optf "case_sensitive=YES"
-$ close optf
-$ endif
-$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
-$ endif
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call map_2_shopt 'mapfile' 'optfile'
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
$ write sys$output "Zlib build completed"
+$ delete/nolog tmp.opt;*
$ exit
+$AMISS_ERR:
+$ write sys$output "No source for config.hin found."
+$ write sys$output "Tried any of ''aconf_in_file'"
+$ goto err_exit
$CC_ERR:
$ write sys$output "C compiler required to build ''name'"
$ goto err_exit
$ set message/facil/ident/sever/text
$ close/nolog optf
$ close/nolog topt
-$ close/nolog conf_hin
$ close/nolog aconf_in
$ close/nolog aconf
$ close/nolog out
$ deck
# descrip.mms: MMS description file for building zlib on VMS
# written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
-OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzio.obj, gzlib.obj\
+OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
deflate.obj, trees.obj, zutil.obj, inflate.obj, \
inftrees.obj, inffast.obj
$ eod
$ write out "CFLAGS=", ccopt
$ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
$ copy sys$input: out
$ deck
-
-all : example.exe minigzip.exe libz.olb
@ write sys$output " Example applications available"
libz.olb : libz.olb($(OBJS))
link $(LOPTS) example,libz.olb/lib
minigzip.exe : minigzip.obj libz.olb
- link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+ link $(LOPTS) minigzip,libz.olb/lib
clean :
delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
# Other dependencies.
-adler32.obj : adler32.c zutil.h zlib.h zconf.h zlibdefs.h
-compress.obj : compress.c zlib.h zconf.h zlibdefs.h
-crc32.obj : crc32.c zutil.h zlib.h zconf.h zlibdefs.h
-deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h zlibdefs.h
-example.obj : example.c zlib.h zconf.h zlibdefs.h
-gzclose.obj : gzclose.c zutil.h zlib.h zconf.h zlibdefs.h
-gzio.obj : gzio.c zutil.h zlib.h zconf.h zlibdefs.h
-gzlib.obj : gzlib.c zutil.h zlib.h zconf.h zlibdefs.h
-gzread.obj : gzread.c zutil.h zlib.h zconf.h zlibdefs.h
-gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h zlibdefs.h
-inffast.obj : inffast.c zutil.h zlib.h zconf.h zlibdefs.h inftrees.h inffast.h
-inflate.obj : inflate.c zutil.h zlib.h zconf.h zlibdefs.h
-inftrees.obj : inftrees.c zutil.h zlib.h zconf.h zlibdefs.h inftrees.h
-minigzip.obj : minigzip.c zlib.h zconf.h zlibdefs.h
-trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h zlibdefs.h
-uncompr.obj : uncompr.c zlib.h zconf.h zlibdefs.h
-zutil.obj : zutil.c zutil.h zlib.h zconf.h zlibdefs.h
+adler32.obj : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj : crc32.c zutil.h zlib.h zconf.h
+deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj : [.test]example.c zlib.h zconf.h
+gzclose.obj : gzclose.c zutil.h zlib.h zconf.h
+gzlib.obj : gzlib.c zutil.h zlib.h zconf.h
+gzread.obj : gzread.c zutil.h zlib.h zconf.h
+gzwrite.obj : gzwrite.c zutil.h zlib.h zconf.h
+inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : [.test]minigzip.c zlib.h zconf.h
+trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : uncompr.c zlib.h zconf.h
+zutil.obj : zutil.c zutil.h zlib.h zconf.h
infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ eod
$ close out
$CREA_OLIST:
$ open/read min makefile.in
$ open/write mod modules.opt
-$ src_check = "OBJC ="
+$ src_check_list = "OBJZ =#OBJG ="
$MRLOOP:
$ read/end=mrdone min rec
-$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ i = 0
+$SRC_CHECK_LOOP:
+$ src_check = f$element(i, "#", src_check_list)
+$ i = i+1
+$ if src_check .eqs. "#" then goto mrloop
+$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
$ rec = rec - src_check
$ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
$MRSLOOP:
$ read/end=mrdone min rec
$ gosub extra_filnam
$ if (f$type('cdef') .eqs. "INTEGER")
$ then
$ write aconf "#define ''cdef' ", 'cdef'
-$ else
+$ else
$ if (f$type('cdef') .eqs. "STRING")
$ then
$ write aconf "#define ''cdef' ", """", '''cdef'', """"
$ on error then goto err_exit
$ delete/nolog 'tmpnam'.*;*/exclude='th'
$ if (cc_prop .and. .not. is_need) .or. -
- (.not. cc_prop .and. is_need)
+ (.not. cc_prop .and. is_need)
$ then
$ write sys$output "Checking for ''cdef'... yes"
$ if f$type('cdef_val'_yes) .nes. ""
$ else
$ call write_config f$fao("#define !AS 1",cdef)
$ endif
-$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
- (cdef .eqs. "_LARGEFILE64_SOURCE") then -
+$ if (cdef .eqs. "HAVE_FSEEKO") .or. (cdef .eqs. "_LARGE_FILES") .or. -
+ (cdef .eqs. "_LARGEFILE64_SOURCE") then -
call write_config f$string("#define _LARGEFILE 1")
-$ else
+$ else
$ write sys$output "Checking for ''cdef'... no"
$ if (comm_h)
$ then
$ set message/fac/ident/sever/text
$ on error then goto err_exit
$ delete/nolog 'tmpnam'_'i'.*;*
-$ if (cc_prop)
+$ if (cc_prop)
$ then
$ write sys$output "Checking for ''cdef'... ", mdef_'i'
$ if f$type(mdef_'i') .eqs. "INTEGER" -
$ return
$!------------------------------------------------------------------------------
$!
-$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
-$! information to build a symbol vector for a shareable image
-$! All the "brains" of this logic was suggested by Hartmut Becker
-$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
-$! (zinser@zinser.no-ip.info), so if you do have problem reports please do not
-$! bother Hartmut/HP, but get in touch with me
-$!
-$! Version history
-$! 0.01 20040406 Skip over shareable images in option file
-$! 0.02 20041109 Fix option file for shareable images with case_sensitive=YES
-$! 0.03 20050107 Skip over Identification labels in option file
-$! 0.04 20060117 Add uppercase alias to code compiled with /name=as_is
-$!
-$ ANAL_OBJ_AXP: Subroutine
-$ V = 'F$Verify(0)
-$ SAY := "WRITE_ SYS$OUTPUT"
-$
-$ IF F$SEARCH("''P1'") .EQS. ""
-$ THEN
-$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
-$ goto exit_aa
-$ ENDIF
-$ IF "''P2'" .EQS. ""
-$ THEN
-$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
-$ goto exit_aa
-$ ENDIF
-$
-$ open/read in 'p1
-$ create a.tmp
-$ open/append atmp a.tmp
-$ loop:
-$ read/end=end_loop in line
-$ if f$locate("/SHARE",f$edit(line,"upcase")) .lt. f$length(line)
-$ then
-$ write sys$output "ANAL_SKP_SHR-i-skipshare, ''line'"
-$ goto loop
-$ endif
-$ if f$locate("IDENTIFICATION=",f$edit(line,"upcase")) .lt. f$length(line)
-$ then
-$ write sys$output "ANAL_OBJ_AXP-i-ident: Identification ", -
- f$element(1,"=",line)
-$ goto loop
-$ endif
-$ f= f$search(line)
-$ if f .eqs. ""
-$ then
-$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
-$ goto loop
-$ endif
-$ define/user sys$output nl:
-$ define/user sys$error nl:
-$ anal/obj/gsd 'f /out=x.tmp
-$ open/read xtmp x.tmp
-$ XLOOP:
-$ read/end=end_xloop xtmp xline
-$ xline = f$edit(xline,"compress")
-$ write atmp xline
-$ goto xloop
-$ END_XLOOP:
-$ close xtmp
-$ goto loop
-$ end_loop:
-$ close in
-$ close atmp
-$ if f$search("a.tmp") .eqs. "" -
- then $ exit
-$ ! all global definitions
-$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
-$ ! all procedures
-$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
-$ search c.tmp "symbol:"/out=d.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input d.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=PROCEDURE)/whole
-exit
-$ ! all data
-$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
-$ search e.tmp "symbol:"/out=f.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input f.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=DATA)/whole
-exit
-$ sort/nodupl d.tmp,f.tmp g.tmp
-$ open/read raw_vector g.tmp
-$ open/write case_vector 'p2'
-$ RAWLOOP:
-$ read/end=end_rawloop raw_vector raw_element
-$ write case_vector raw_element
-$ if f$locate("=PROCEDURE)",raw_element) .lt. f$length(raw_element)
-$ then
-$ name = f$element(1,"=",raw_element) - "("
-$ if f$edit(name,"UPCASE") .nes. name then -
- write case_vector f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)", -
- f$edit(name,"UPCASE"), name)
-$ endif
-$ if f$locate("=DATA)",raw_element) .lt. f$length(raw_element)
-$ then
-$ name = f$element(1,"=",raw_element) - "("
-$ if f$edit(name,"UPCASE") .nes. name then -
- write case_vector f$fao(" symbol_vector=(!AS/!AS=DATA)", -
- f$edit(name,"UPCASE"), name)
-$ endif
-$ goto rawloop
-$ END_RAWLOOP:
-$ close raw_vector
-$ close case_vector
-$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*,g.tmp;*
-$ if f$search("x.tmp") .nes. "" -
- then $ delete x.tmp;*
-$!
-$ EXIT_AA:
-$ if V then set verify
-$ endsubroutine
-$!------------------------------------------------------------------------------
-$!
$! Write configuration to both permanent and temporary config file
$!
$! Version history
$ close confh
$ENDSUBROUTINE
$!------------------------------------------------------------------------------
+$!
+$! Analyze the project map file and create the symbol vector for a shareable
+$! image from it
+$!
+$! Version history
+$! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
+$!
+$ MAP_2_SHOPT: Subroutine
+$!
+$ SAY := "WRITE_ SYS$OUTPUT"
+$!
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$ SAY "MAP_2_SHOPT-E-NOSUCHFILE: Error, inputfile ''p1' not available"
+$ goto exit_m2s
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$ SAY "MAP_2_SHOPT: Error, no output file provided"
+$ goto exit_m2s
+$ ENDIF
+$!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
+$ open/read map 'p1
+$ if axp .or. ia64
+$ then
+$ open/write aopt a.opt
+$ open/write bopt b.opt
+$ write aopt " CASE_SENSITIVE=YES"
+$ write bopt "SYMBOL_VECTOR= (-"
+$ mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$ if f$type(module'mod_sym_num') .nes. ""
+$ then
+$ mod_in = 0
+$ MOD_SYM_IN:
+$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$ if shared_proc .nes. "#"
+$ then
+$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+ f$edit(shared_proc,"upcase"),shared_proc)
+$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$ mod_in = mod_in + 1
+$ goto mod_sym_in
+$ endif
+$ mod_sym_num = mod_sym_num + 1
+$ goto mod_sym_loop
+$ endif
+$MAP_LOOP:
+$ read/end=map_end map line
+$ if (f$locate("{",line).lt. f$length(line)) .or. -
+ (f$locate("global:", line) .lt. f$length(line))
+$ then
+$ proc = true
+$ goto map_loop
+$ endif
+$ if f$locate("}",line).lt. f$length(line) then proc = false
+$ if f$locate("local:", line) .lt. f$length(line) then proc = false
+$ if proc
+$ then
+$ shared_proc = f$edit(line,"collapse")
+$ chop_semi = f$locate(";", shared_proc)
+$ if chop_semi .lt. f$length(shared_proc) then -
+ shared_proc = f$extract(0, chop_semi, shared_proc)
+$ write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+ f$edit(shared_proc,"upcase"),shared_proc)
+$ write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$ endif
+$ goto map_loop
+$MAP_END:
+$ close/nolog aopt
+$ close/nolog bopt
+$ open/append libopt 'p2'
+$ open/read aopt a.opt
+$ open/read bopt b.opt
+$ALOOP:
+$ read/end=aloop_end aopt line
+$ write libopt line
+$ goto aloop
+$ALOOP_END:
+$ close/nolog aopt
+$ sv = ""
+$BLOOP:
+$ read/end=bloop_end bopt svn
+$ if (svn.nes."")
+$ then
+$ if (sv.nes."") then write libopt sv
+$ sv = svn
+$ endif
+$ goto bloop
+$BLOOP_END:
+$ write libopt f$extract(0,f$length(sv)-2,sv), "-"
+$ write libopt ")"
+$ close/nolog bopt
+$ delete/nolog/noconf a.opt;*,b.opt;*
+$ else
+$ if vax
+$ then
+$ open/append libopt 'p2'
+$ mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$ if f$type(module'mod_sym_num') .nes. ""
+$ then
+$ mod_in = 0
+$ VMOD_SYM_IN:
+$ shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$ if shared_proc .nes. "#"
+$ then
+$ write libopt f$fao("UNIVERSAL=!AS",-
+ f$edit(shared_proc,"upcase"))
+$ mod_in = mod_in + 1
+$ goto vmod_sym_in
+$ endif
+$ mod_sym_num = mod_sym_num + 1
+$ goto vmod_sym_loop
+$ endif
+$VMAP_LOOP:
+$ read/end=vmap_end map line
+$ if (f$locate("{",line).lt. f$length(line)) .or. -
+ (f$locate("global:", line) .lt. f$length(line))
+$ then
+$ proc = true
+$ goto vmap_loop
+$ endif
+$ if f$locate("}",line).lt. f$length(line) then proc = false
+$ if f$locate("local:", line) .lt. f$length(line) then proc = false
+$ if proc
+$ then
+$ shared_proc = f$edit(line,"collapse")
+$ chop_semi = f$locate(";", shared_proc)
+$ if chop_semi .lt. f$length(shared_proc) then -
+ shared_proc = f$extract(0, chop_semi, shared_proc)
+$ write libopt f$fao("UNIVERSAL=!AS",-
+ f$edit(shared_proc,"upcase"))
+$ endif
+$ goto vmap_loop
+$VMAP_END:
+$ else
+$ write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
+$ write sys$output "No options file created"
+$ endif
+$ endif
+$ EXIT_M2S:
+$ close/nolog map
+$ close/nolog libopt
+$ endsubroutine
projects / zlib.git / blobdiff