/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
+ * Copyright (C) 2004-2019 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
local int gz_init OF((gz_statep));
local int gz_comp OF((gz_statep, int));
local int gz_zero OF((gz_statep, z_off64_t));
+local z_size_t gz_write OF((gz_statep, voidpc, z_size_t));
/* Initialize state for writing a gzip file. Mark initialization by setting
state->size to non-zero. Return -1 on a memory allocation failure, or 0 on
gz_statep state;
int flush;
{
- int ret;
- ssize_t got;
- unsigned have;
+ int ret, writ;
+ unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
z_streamp strm = &(state->strm);
/* allocate memory if this is the first time through */
/* write directly if requested */
if (state->direct) {
while (strm->avail_in) {
- got = write(state->fd, strm->next_in, strm->avail_in);
- if (got < 0) {
+ put = strm->avail_in > max ? max : strm->avail_in;
+ writ = write(state->fd, strm->next_in, put);
+ if (writ < 0) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
- strm->avail_in -= (unsigned)got;
- strm->next_in += got;
+ strm->avail_in -= (unsigned)writ;
+ strm->next_in += writ;
}
return 0;
}
+ /* check for a pending reset */
+ if (state->reset) {
+ /* don't start a new gzip member unless there is data to write */
+ if (strm->avail_in == 0)
+ return 0;
+ deflateReset(strm);
+ state->reset = 0;
+ }
+
/* run deflate() on provided input until it produces no more output */
ret = Z_OK;
do {
if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
(flush != Z_FINISH || ret == Z_STREAM_END))) {
while (strm->next_out > state->x.next) {
- got = write(state->fd, state->x.next,
- (unsigned long)(strm->next_out - state->x.next));
- if (got < 0) {
+ put = strm->next_out - state->x.next > (int)max ? max :
+ (unsigned)(strm->next_out - state->x.next);
+ writ = write(state->fd, state->x.next, put);
+ if (writ < 0) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
- state->x.next += got;
+ state->x.next += writ;
}
if (strm->avail_out == 0) {
strm->avail_out = state->size;
strm->next_out = state->out;
+ state->x.next = state->out;
}
}
/* if that completed a deflate stream, allow another to start */
if (flush == Z_FINISH)
- deflateReset(strm);
+ state->reset = 1;
/* all done, no errors */
return 0;
return 0;
}
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
- gzFile file;
+/* Write len bytes from buf to file. Return the number of bytes written. If
+ the returned value is less than len, then there was an error. */
+local z_size_t gz_write(state, buf, len)
+ gz_statep state;
voidpc buf;
- unsigned len;
+ z_size_t len;
{
- unsigned put = len;
- gz_statep state;
- z_streamp strm;
-
- /* get internal structure */
- if (file == NULL)
- return 0;
- state = (gz_statep)file;
- strm = &(state->strm);
-
- /* check that we're writing and that there's no error */
- if (state->mode != GZ_WRITE || state->err != Z_OK)
- return 0;
-
- /* since an int is returned, make sure len fits in one, otherwise return
- with an error (this avoids the flaw in the interface) */
- if ((int)len < 0) {
- gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
- return 0;
- }
+ z_size_t put = len;
/* if len is zero, avoid unnecessary operations */
if (len == 0)
do {
unsigned have, copy;
- if (strm->avail_in == 0)
- strm->next_in = state->in;
- have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+ if (state->strm.avail_in == 0)
+ state->strm.next_in = state->in;
+ have = (unsigned)((state->strm.next_in + state->strm.avail_in) -
+ state->in);
copy = state->size - have;
if (copy > len)
- copy = len;
+ copy = (unsigned)len;
memcpy(state->in + have, buf, copy);
- strm->avail_in += copy;
+ state->strm.avail_in += copy;
state->x.pos += copy;
buf = (const char *)buf + copy;
len -= copy;
}
else {
/* consume whatever's left in the input buffer */
- if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+ if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
/* directly compress user buffer to file */
- strm->avail_in = len;
- strm->next_in = (z_const Bytef *)buf;
- state->x.pos += len;
- if (gz_comp(state, Z_NO_FLUSH) == -1)
- return 0;
+ state->strm.next_in = (z_const Bytef *)buf;
+ do {
+ unsigned n = (unsigned)-1;
+ if (n > len)
+ n = (unsigned)len;
+ state->strm.avail_in = n;
+ state->x.pos += n;
+ if (gz_comp(state, Z_NO_FLUSH) == -1)
+ return 0;
+ len -= n;
+ } while (len);
}
- /* input was all buffered or compressed (put will fit in int) */
- return (int)put;
+ /* input was all buffered or compressed */
+ return put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(file, buf, len)
+ gzFile file;
+ voidpc buf;
+ unsigned len;
+{
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* since an int is returned, make sure len fits in one, otherwise return
+ with an error (this avoids a flaw in the interface) */
+ if ((int)len < 0) {
+ gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+ return 0;
+ }
+
+ /* write len bytes from buf (the return value will fit in an int) */
+ return (int)gz_write(state, buf, len);
+}
+
+/* -- see zlib.h -- */
+z_size_t ZEXPORT gzfwrite(buf, size, nitems, file)
+ voidpc buf;
+ z_size_t size;
+ z_size_t nitems;
+ gzFile file;
+{
+ z_size_t len;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return 0;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return 0;
+
+ /* compute bytes to read -- error on overflow */
+ len = nitems * size;
+ if (size && len / size != nitems) {
+ gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
+ return 0;
+ }
+
+ /* write len bytes to buf, return the number of full items written */
+ return len ? gz_write(state, buf, len) / size : 0;
}
/* -- see zlib.h -- */
/* no room in buffer or not initialized, use gz_write() */
buf[0] = (unsigned char)c;
- if (gzwrite(file, buf, 1) != 1)
+ if (gz_write(state, buf, 1) != 1)
return -1;
return c & 0xff;
}
/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
+int ZEXPORT gzputs(file, s)
gzFile file;
- const char *str;
+ const char *s;
{
- int ret;
- unsigned len;
+ z_size_t len, put;
+ gz_statep state;
+
+ /* get internal structure */
+ if (file == NULL)
+ return -1;
+ state = (gz_statep)file;
+
+ /* check that we're writing and that there's no error */
+ if (state->mode != GZ_WRITE || state->err != Z_OK)
+ return -1;
/* write string */
- len = (unsigned)strlen(str);
- ret = gzwrite(file, str, len);
- return ret == 0 && len != 0 ? -1 : ret;
+ len = strlen(s);
+ if ((int)len < 0 || (unsigned)len != len) {
+ gz_error(state, Z_STREAM_ERROR, "string length does not fit in int");
+ return -1;
+ }
+ put = gz_write(state, s, len);
+ return put < len ? -1 : (int)len;
}
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
strm->avail_in = state->size;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return state->err;
- memcpy(state->in, state->in + state->size, left);
+ memmove(state->in, state->in + state->size, left);
strm->next_in = state->in;
strm->avail_in = left;
}
strm->avail_in = state->size;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return state->err;
- memcpy(state->in, state->in + state->size, left);
+ memmove(state->in, state->in + state->size, left);
strm->next_in = state->in;
strm->avail_in = left;
}
/* change compression parameters for subsequent input */
if (state->size) {
/* flush previous input with previous parameters before changing */
- if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
+ if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1)
return state->err;
deflateParams(strm, level, strategy);
}
projects / zlib.git / blobdiff