# The time in seconds it takes between repeated right clicks when holding the right
# mouse button.
-repeat_rightclick_time (Rightclick repetition interval) float 0.25
+repeat_rightclick_time (Rightclick repetition interval) float 0.25 0.001
# Automatically jump up single-node obstacles.
autojump (Automatic jumping) bool false
# The time in seconds it takes between repeated events
# when holding down a joystick button combination.
-repeat_joystick_button_time (Joystick button repetition interval) float 0.17
+repeat_joystick_button_time (Joystick button repetition interval) float 0.17 0.001
# The sensitivity of the joystick axes for moving the
# ingame view frustum around.
# Key for toggling pitch move mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_pitchmove (Pitch move key) key KEY_KEY_L
+keymap_pitchmove (Pitch move key) key KEY_KEY_P
# Key for toggling fast mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# when set to higher number than 0.
fsaa (FSAA) enum 0 0,1,2,4,8,16
-# Undersampling is similar to using lower screen resolution, but it applies
+# Undersampling is similar to using a lower screen resolution, but it applies
# to the game world only, keeping the GUI intact.
-# It should give significant performance boost at the cost of less detailed image.
-undersampling (Undersampling) enum 0 0,2,3,4
+# It should give a significant performance boost at the cost of less detailed image.
+# Higher values result in a less detailed image.
+undersampling (Undersampling) int 1 1 8
[**Shaders]
[***Tone Mapping]
-# Enables filmic tone mapping
+# Enables Hable's 'Uncharted 2' filmic tone mapping.
+# Simulates the tone curve of photographic film and how this approximates the
+# appearance of high dynamic range images. Mid-range contrast is slightly
+# enhanced, highlights and shadows are gradually compressed.
tone_mapping (Filmic tone mapping) bool false
[***Bumpmapping]
# Requires shaders to be enabled.
enable_waving_water (Waving water) bool false
-water_wave_height (Waving water height) float 1.0
+water_wave_height (Waving water wave height) float 1.0
-water_wave_length (Waving water length) float 20.0
+water_wave_length (Waving water wavelength) float 20.0
-water_wave_speed (Waving water speed) float 5.0
+water_wave_speed (Waving water wave speed) float 5.0
# Set to true enables waving leaves.
# Requires shaders to be enabled.
# If FPS would go higher than this, limit it by sleeping
# to not waste CPU power for no benefit.
-fps_max (Maximum FPS) int 60
+fps_max (Maximum FPS) int 60 1
# Maximum FPS when game is paused.
-pause_fps_max (FPS in pause menu) int 20
+pause_fps_max (FPS in pause menu) int 20 1
# Open the pause menu when the window's focus is lost. Does not pause if a formspec is
# open.
# View distance in nodes.
viewing_range (Viewing range) int 100 20 4000
-# Camera near plane distance in nodes, between 0 and 0.5
+# Camera 'near clipping plane' distance in nodes, between 0 and 0.5.
# Most users will not need to change this.
# Increasing can reduce artifacting on weaker GPUs.
# 0.1 = Default, 0.25 = Good value for weaker tablets.
-near_plane (Near plane) float 0.1 0 0.5
+near_plane (Near clipping plane) float 0.1 0 0.5
# Width component of the initial window size.
-screen_w (Screen width) int 1024
+screen_w (Screen width) int 1024 1
# Height component of the initial window size.
-screen_h (Screen height) int 600
+screen_h (Screen height) int 600 1
# Save window size automatically when modified.
autosave_screensize (Autosave screen size) bool true
# Field of view in degrees.
fov (Field of view) int 72 45 160
-# Adjust the gamma encoding for the light tables. Higher numbers are brighter.
-# This setting is for the client only and is ignored by the server.
-display_gamma (Gamma) float 1.0 0.5 3.0
+# Alters the light curve by applying 'gamma correction' to it.
+# Higher values make middle and lower light levels brighter.
+# Value '1.0' leaves the light curve unaltered.
+# This only has significant effect on daylight and artificial
+# light, it has very little effect on natural night light.
+display_gamma (Light curve gamma) float 1.0 0.33 3.0
# Gradient of light curve at minimum light level.
-lighting_alpha (Darkness sharpness) float 0.0 0.0 4.0
+# Controls the contrast of the lowest light levels.
+lighting_alpha (Light curve low gradient) float 0.0 0.0 3.0
# Gradient of light curve at maximum light level.
-lighting_beta (Lightness sharpness) float 1.5 0.0 4.0
+# Controls the contrast of the highest light levels.
+lighting_beta (Light curve high gradient) float 1.5 0.0 3.0
-# Strength of light curve mid-boost.
-lighting_boost (Light curve mid boost) float 0.2 0.0 1.0
+# Strength of light curve boost.
+# The 3 'boost' parameters define a range of the light
+# curve that is boosted in brightness.
+lighting_boost (Light curve boost) float 0.2 0.0 0.4
-# Center of light curve mid-boost.
-lighting_boost_center (Light curve mid boost center) float 0.5 0.0 1.0
+# Center of light curve boost range.
+# Where 0.0 is minimum light level, 1.0 is maximum light level.
+lighting_boost_center (Light curve boost center) float 0.5 0.0 1.0
-# Spread of light curve mid-boost.
-# Standard deviation of the mid-boost gaussian.
-lighting_boost_spread (Light curve mid boost spread) float 0.2 0.0 1.0
+# Spread of light curve boost range.
+# Controls the width of the range to be boosted.
+# Standard deviation of the light curve boost Gaussian.
+lighting_boost_spread (Light curve boost spread) float 0.2 0.0 0.4
# Path to texture directory. All textures are first searched from here.
texture_path (Texture path) path
# True = 256
# False = 128
-# Useable to make minimap smoother on slower machines.
+# Usable to make minimap smoother on slower machines.
minimap_double_scan_height (Minimap scan height) bool true
# Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
# This will smooth over some of the rough edges, and blend
# pixels when scaling down, at the cost of blurring some
# edge pixels when images are scaled by non-integer sizes.
-gui_scaling (GUI scaling) float 1.0
+gui_scaling (GUI scaling) float 1.0 0.001
# When gui_scaling_filter is true, all GUI images need to be
# filtered in software, but some images are generated directly
# Path to TrueTypeFont or bitmap.
font_path (Font path) filepath fonts/liberationsans.ttf
-font_size (Font size) int 16
+font_size (Font size) int 16 1
# Font shadow offset, if 0 then shadow will not be drawn.
font_shadow (Font shadow) int 1
mono_font_path (Monospace font path) filepath fonts/liberationmono.ttf
-mono_font_size (Monospace font size) int 15
+mono_font_size (Monospace font size) int 15 1
# This font will be used for certain languages.
fallback_font_path (Fallback font) filepath fonts/DroidSansFallbackFull.ttf
-fallback_font_size (Fallback font size) int 15
+fallback_font_size (Fallback font size) int 15 1
fallback_font_shadow (Fallback font shadow) int 1
fallback_font_shadow_alpha (Fallback font shadow alpha) int 128 0 255
[*Advanced]
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
-screen_dpi (DPI) int 72
+screen_dpi (DPI) int 72 1
# Windows systems only: Start Minetest with the command line window in the background.
# Contains the same information as the file debug.txt (default name).
# This option is only read when server starts.
enable_rollback_recording (Rollback recording) bool false
+# Format of player chat messages. The following strings are valid placeholders:
+# @name, @message, @timestamp (optional)
+chat_message_format (Chat message format) string <@name> @message
+
# A message to be displayed to all clients when the server shuts down.
kick_msg_shutdown (Shutdown message) string Server shutting down.
time_speed (Time speed) int 72
# Time of day when a new world is started, in millihours (0-23999).
-world_start_time (World start time) int 5250 0 23999
+world_start_time (World start time) int 6125 0 23999
# Interval of saving important changes in the world, stated in seconds.
server_map_save_interval (Map save interval) float 5.3
[**Physics]
+# Horizontal and vertical acceleration on ground or when climbing,
+# in nodes per second per second.
movement_acceleration_default (Default acceleration) float 3
+
+# Horizontal acceleration in air when jumping or falling,
+# in nodes per second per second.
movement_acceleration_air (Acceleration in air) float 2
+
+# Horizontal and vertical acceleration in fast mode,
+# in nodes per second per second.
movement_acceleration_fast (Fast mode acceleration) float 10
+
+# Walking and flying speed, in nodes per second.
movement_speed_walk (Walking speed) float 4
+
+# Sneaking speed, in nodes per second.
movement_speed_crouch (Sneaking speed) float 1.35
+
+# Walking, flying and climbing speed in fast mode, in nodes per second.
movement_speed_fast (Fast mode speed) float 20
+
+# Vertical climbing speed, in nodes per second.
movement_speed_climb (Climbing speed) float 3
+
+# Initial vertical speed when jumping, in nodes per second.
movement_speed_jump (Jumping speed) float 6.5
+
+# Decrease this to increase liquid resistance to movement.
movement_liquid_fluidity (Liquid fluidity) float 1
+
+# Maximum liquid resistance. Controls deceleration when entering liquid at
+# high speed.
movement_liquid_fluidity_smooth (Liquid fluidity smoothing) float 0.5
-movement_liquid_sink (Liquid sinking speed) float 10
+
+# Controls sinking speed in liquid.
+movement_liquid_sink (Liquid sinking) float 10
+
+# Acceleration of gravity, in nodes per second per second.
movement_gravity (Gravity) float 9.81
[**Advanced]
-# Handling for deprecated lua api calls:
+# Handling for deprecated Lua API calls:
# - legacy: (try to) mimic old behaviour (default for release).
# - log: mimic and log backtrace of deprecated call (default for debug).
# - error: abort on usage of deprecated call (suggested for mod developers).
# - verbose
debug_log_level (Debug log level) enum action ,none,error,warning,action,info,verbose
+# If the file size of debug.txt exceeds the number of megabytes specified in
+# this setting when it is opened, the file is moved to debug.txt.1,
+# deleting an older debug.txt.1 if it exists.
+# debug.txt is only moved if this setting is positive.
+debug_log_size_max (Debug log file size threshold) int 50
+
# IPv6 support.
enable_ipv6 (IPv6) bool true
# Name of map generator to be used when creating a new world.
# Creating a world in the main menu will override this.
-# Current stable mapgens:
-# v5, v6, v7 (except floatlands), singlenode.
-# 'stable' means the terrain shape in an existing world will not be changed
-# in the future. Note that biomes are defined by games and may still change.
-mg_name (Mapgen name) enum v7 v5,v6,v7,valleys,carpathian,fractal,flat,singlenode
+# Current mapgens in a highly unstable state:
+# - The optional floatlands of v7 (disabled by default).
+mg_name (Mapgen name) enum v7 v7,valleys,carpathian,v5,flat,fractal,singlenode,v6
# Water surface level of the world.
water_level (Water level) int 1
# and junglegrass, in all other mapgens this flag controls all decorations.
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations,biomes caves,dungeons,light,decorations,biomes,nocaves,nodungeons,nolight,nodecorations,nobiomes
-# Whether dungeons occasionally project from the terrain.
-projecting_dungeons (Projecting dungeons) bool true
-
[*Biome API temperature and humidity noise parameters]
# Temperature variation for biomes.
# Y of upper limit of large caves.
mgv5_large_cave_depth (Large cave depth) int -256
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgv5_lava_depth (Lava depth) int -256
# 3D noise defining terrain.
mgv5_np_ground (Ground noise) noise_params_3d 0, 40, (80, 80, 80), 983240, 4, 0.55, 2.0, eased
+# 3D noise that determines number of dungeons per mapchunk.
+mgv5_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen V6]
# Map generation attributes specific to Mapgen v6.
# The 'snowbiomes' flag enables the new 5 biome system.
-# When the new biome system is enabled jungles are automatically enabled and
+# When the 'snowbiomes' flag is enabled jungles are automatically enabled and
# the 'jungles' flag is ignored.
-mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
+mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,noflat,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
# Deserts occur when np_biome exceeds this value.
-# When the new biome system is enabled, this is ignored.
+# When the 'snowbiomes' flag is enabled, this is ignored.
mgv6_freq_desert (Desert noise threshold) float 0.45
# Sandy beaches occur when np_beach exceeds this value.
# Y of upper limit of large caves.
mgv7_large_cave_depth (Large cave depth) int -33
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgv7_lava_depth (Lava depth) int -256
# Second of two 3D noises that together define tunnels.
mgv7_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgv7_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Carpathian]
# Map generation attributes specific to Mapgen Carpathian.
-mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns caverns,nocaverns
+mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns,norivers caverns,rivers,nocaverns,norivers
# Defines the base ground level.
mgcarpathian_base_level (Base ground level) float 12.0
+# Defines the width of the river channel.
+mgcarpathian_river_width (River channel width) float 0.05
+
+# Defines the depth of the river channel.
+mgcarpathian_river_depth (River channel depth) float 24.0
+
+# Defines the width of the river valley.
+mgcarpathian_valley_width (River valley width) float 0.25
+
# Controls width of tunnels, a smaller value creates wider tunnels.
mgcarpathian_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgcarpathian_large_cave_depth (Large cave depth) int -33
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgcarpathian_lava_depth (Lava depth) int -256
# 2D noise that controls the shape/size of step mountains.
mgcarpathian_np_step_mnt (Step mountain size noise) noise_params_2d 0, 8, (509, 509, 509), 2590, 6, 0.6, 2.0, eased
+# 2D noise that locates the river valleys and channels.
+mgcarpathian_np_rivers (River noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
+
# 3D noise for mountain overhangs, cliffs, etc. Usually small variations.
mgcarpathian_np_mnt_var (Mountain variation noise) noise_params_3d 0, 1, (499, 499, 499), 2490, 5, 0.55, 2.0
# 3D noise defining giant caverns.
mgcarpathian_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgcarpathian_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Flat]
-# Map generation attributes specific to Mapgen flat.
+# Map generation attributes specific to Mapgen Flat.
# Occasional lakes and hills can be added to the flat world.
mgflat_spflags (Mapgen Flat specific flags) flags nolakes,nohills lakes,hills,nolakes,nohills
# Y of upper limit of large caves.
mgflat_large_cave_depth (Large cave depth) int -33
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgflat_lava_depth (Lava depth) int -256
# Second of two 3D noises that together define tunnels.
mgflat_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgflat_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Fractal]
+# Map generation attributes specific to Mapgen Fractal.
+# 'terrain' enables the generation of non-fractal terrain:
+# ocean, islands and underground.
+mgfractal_spflags (Mapgen Fractal specific flags) flags terrain terrain,noterrain
+
# Controls width of tunnels, a smaller value creates wider tunnels.
mgfractal_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgfractal_large_cave_depth (Large cave depth) int -33
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgfractal_lava_depth (Lava depth) int -256
mgfractal_dungeon_ymax (Dungeon maximum Y) int 31000
# Selects one of 18 fractal types.
-# 1 = 4D "Roundy" mandelbrot set.
-# 2 = 4D "Roundy" julia set.
-# 3 = 4D "Squarry" mandelbrot set.
-# 4 = 4D "Squarry" julia set.
-# 5 = 4D "Mandy Cousin" mandelbrot set.
-# 6 = 4D "Mandy Cousin" julia set.
-# 7 = 4D "Variation" mandelbrot set.
-# 8 = 4D "Variation" julia set.
-# 9 = 3D "Mandelbrot/Mandelbar" mandelbrot set.
-# 10 = 3D "Mandelbrot/Mandelbar" julia set.
-# 11 = 3D "Christmas Tree" mandelbrot set.
-# 12 = 3D "Christmas Tree" julia set.
-# 13 = 3D "Mandelbulb" mandelbrot set.
-# 14 = 3D "Mandelbulb" julia set.
-# 15 = 3D "Cosine Mandelbulb" mandelbrot set.
-# 16 = 3D "Cosine Mandelbulb" julia set.
-# 17 = 4D "Mandelbulb" mandelbrot set.
-# 18 = 4D "Mandelbulb" julia set.
+# 1 = 4D "Roundy" Mandelbrot set.
+# 2 = 4D "Roundy" Julia set.
+# 3 = 4D "Squarry" Mandelbrot set.
+# 4 = 4D "Squarry" Julia set.
+# 5 = 4D "Mandy Cousin" Mandelbrot set.
+# 6 = 4D "Mandy Cousin" Julia set.
+# 7 = 4D "Variation" Mandelbrot set.
+# 8 = 4D "Variation" Julia set.
+# 9 = 3D "Mandelbrot/Mandelbar" Mandelbrot set.
+# 10 = 3D "Mandelbrot/Mandelbar" Julia set.
+# 11 = 3D "Christmas Tree" Mandelbrot set.
+# 12 = 3D "Christmas Tree" Julia set.
+# 13 = 3D "Mandelbulb" Mandelbrot set.
+# 14 = 3D "Mandelbulb" Julia set.
+# 15 = 3D "Cosine Mandelbulb" Mandelbrot set.
+# 16 = 3D "Cosine Mandelbulb" Julia set.
+# 17 = 4D "Mandelbulb" Mandelbrot set.
+# 18 = 4D "Mandelbulb" Julia set.
mgfractal_fractal (Fractal type) int 1 1 18
# Iterations of the recursive function.
# Can be used to move a desired point to (0, 0) to create a
# suitable spawn point, or to allow 'zooming in' on a desired
# point by increasing 'scale'.
-# The default is tuned for a suitable spawn point for mandelbrot
+# The default is tuned for a suitable spawn point for Mandelbrot
# sets with default parameters, it may need altering in other
# situations.
# Range roughly -2 to 2. Multiply by 'scale' for offset in nodes.
# Second of two 3D noises that together define tunnels.
mgfractal_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgfractal_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Valleys]
# Map generation attributes specific to Mapgen Valleys.
# 'vary_river_depth': If enabled, low humidity and high heat causes rivers
# to become shallower and occasionally dry.
# 'altitude_dry': Reduces humidity with altitude.
-mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers,vary_river_depth,altitude_dry altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers,vary_river_depth,novary_river_depth,altitude_dry,noaltitude_dry
+mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers,vary_river_depth,altitude_dry altitude_chill,humid_rivers,vary_river_depth,altitude_dry,noaltitude_chill,nohumid_rivers,novary_river_depth,noaltitude_dry
# The vertical distance over which heat drops by 20 if 'altitude_chill' is
# enabled. Also the vertical distance over which humidity drops by 10 if
# Depth below which you'll find large caves.
mgvalleys_large_cave_depth (Large cave depth) int -33
+# Deprecated, define and locate cave liquids using biome definitions instead.
# Y of upper limit of lava in large caves.
mgvalleys_lava_depth (Lava depth) int 1
# Slope and fill work together to modify the heights.
mgvalleys_np_inter_valley_slope (Valley slope) noise_params_2d 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0, eased
+# 3D noise that determines number of dungeons per mapchunk.
+mgvalleys_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Advanced]
# Size of mapchunks generated by mapgen, stated in mapblocks (16 nodes).
# WARNING: Currently there are multiple bugs that may cause crashes when
# 'num_emerge_threads' is larger than 1. Until this warning is removed it is
# strongly recommended this value is set to the default '1'.
-# Empty or 0 value:
+# Value 0:
# - Automatic selection. The number of emerge threads will be
# - 'number of processors - 2', with a lower limit of 1.
# Any other value:
projects / minetest.git / blobdiff