# Flags are always separated by comma without spaces.
# - default possible_flags
# * noise_params_2d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * noise_params_3d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * v3f:
# Format is (<X>, <Y>, <Z>)
# This requires the "fly" privilege on the server.
free_move (Flying) bool false
+# If enabled, makes move directions relative to the player's pitch when flying or swimming.
+pitch_move (Pitch move mode) bool false
+
# Fast movement (via the "special" key).
# This requires the "fast" privilege on the server.
fast_move (Fast movement) bool false
# Mouse sensitivity multiplier.
mouse_sensitivity (Mouse sensitivity) float 0.2
-# If enabled, "special" key instead of "sneak" key is used for climbing down and descending.
+# If enabled, "special" key instead of "sneak" key is used for climbing down and
+# descending.
aux1_descends (Special key for climbing/descending) bool false
# Double-tapping the jump key toggles fly mode.
doubletap_jump (Double tap jump for fly) bool false
-# If disabled, "special" key is used to fly fast if both fly and fast mode are enabled.
+# If disabled, "special" key is used to fly fast if both fly and fast mode are
+# enabled.
always_fly_fast (Always fly and fast) bool true
-# The time in seconds it takes between repeated right clicks when holding the right mouse button.
-repeat_rightclick_time (Rightclick repetition interval) float 0.25
+# The time in seconds it takes between repeated node placements when holding
+# the place button.
+repeat_place_time (Place repetition interval) float 0.25 0.001
+
+# Automatically jump up single-node obstacles.
+autojump (Automatic jumping) bool false
# Prevent digging and placing from repeating when holding the mouse buttons.
# Enable this when you dig or place too often by accident.
# The time in seconds it takes between repeated events
# when holding down a joystick button combination.
-repeat_joystick_button_time (Joystick button repetition interval) float 0.17
+repeat_joystick_button_time (Joystick button repetition interval) float 0.17 0.001
# The sensitivity of the joystick axes for moving the
# ingame view frustum around.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_sneak (Sneak key) key KEY_LSHIFT
+# Key for digging.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_dig (Dig key) key KEY_LBUTTON
+
+# Key for placing.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_place (Place key) key KEY_RBUTTON
+
# Key for opening the inventory.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_inventory (Inventory key) key KEY_KEY_I
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_freemove (Fly key) key KEY_KEY_K
+# Key for toggling pitch move mode.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_pitchmove (Pitch move key) key KEY_KEY_P
+
# Key for toggling fast mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_fastmove (Fast key) key KEY_KEY_J
# Key for toggling autoforward.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_autoforward (Automatic forwards key) key
+keymap_autoforward (Automatic forward key) key
# Key for toggling cinematic mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# Key for toggling display of minimap.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_minimap (Minimap key) key KEY_F9
+keymap_minimap (Minimap key) key KEY_KEY_V
# Key for taking screenshots.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_slot20 (Hotbar slot 20 key) key
-# Key for selecting the 21th hotbar slot.
+# Key for selecting the 21st hotbar slot.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_slot21 (Hotbar slot 21 key) key
-# Key for selecting the 22th hotbar slot.
+# Key for selecting the 22nd hotbar slot.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_slot22 (Hotbar slot 22 key) key
-# Key for selecting the 23th hotbar slot.
+# Key for selecting the 23rd hotbar slot.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_slot23 (Hotbar slot 23 key) key
+# Key for selecting the 24th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot24 (Hotbar slot 24 key) key
+
+# Key for selecting the 25th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot25 (Hotbar slot 25 key) key
+
+# Key for selecting the 26th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot26 (Hotbar slot 26 key) key
+
+# Key for selecting the 27th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot27 (Hotbar slot 27 key) key
+
+# Key for selecting the 28th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot28 (Hotbar slot 28 key) key
+
+# Key for selecting the 29th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot29 (Hotbar slot 29 key) key
+
+# Key for selecting the 30th hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot30 (Hotbar slot 30 key) key
+
+# Key for selecting the 31st hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot31 (Hotbar slot 31 key) key
+
+# Key for selecting the 32nd hotbar slot.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_slot32 (Hotbar slot 32 key) key
+
# Key for toggling the display of the HUD.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_toggle_hud (HUD toggle key) key KEY_F1
-# Key for toggling the display of the chat.
+# Key for toggling the display of chat.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_toggle_chat (Chat toggle key) key KEY_F2
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_console (Large chat console key) key KEY_F10
-# Key for toggling the display of the fog.
+# Key for toggling the display of fog.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_toggle_force_fog_off (Fog toggle key) key KEY_F3
# Key for switching between first- and third-person camera.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_camera_mode (Toggle camera mode key) key KEY_F7
+keymap_camera_mode (Toggle camera mode key) key KEY_KEY_C
# Key for increasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
[**Basic]
-# Enable VBO
+# Enable vertex buffer objects.
+# This should greatly improve graphics performance.
enable_vbo (VBO) bool true
# Whether to fog out the end of the visible area.
[**Filtering]
-# Use mip mapping to scale textures. May slightly increase performance.
+# Use mip mapping to scale textures. May slightly increase performance,
+# especially when using a high resolution texture pack.
+# Gamma correct downscaling is not supported.
mip_map (Mipmapping) bool false
# Use anisotropic filtering when viewing at textures from an angle.
# Filtered textures can blend RGB values with fully-transparent neighbors,
# which PNG optimizers usually discard, sometimes resulting in a dark or
-# light edge to transparent textures. Apply this filter to clean that up
+# light edge to transparent textures. Apply this filter to clean that up
# at texture load time.
texture_clean_transparent (Clean transparent textures) bool false
# When using bilinear/trilinear/anisotropic filters, low-resolution textures
# can be blurred, so automatically upscale them with nearest-neighbor
-# interpolation to preserve crisp pixels. This sets the minimum texture size
+# interpolation to preserve crisp pixels. This sets the minimum texture size
# for the upscaled textures; higher values look sharper, but require more
-# memory. Powers of 2 are recommended. Setting this higher than 1 may not
+# memory. Powers of 2 are recommended. Setting this higher than 1 may not
# have a visible effect unless bilinear/trilinear/anisotropic filtering is
# enabled.
# This is also used as the base node texture size for world-aligned
# texture autoscaling.
texture_min_size (Minimum texture size) int 64
-# Experimental option, might cause visible spaces between blocks
-# when set to higher number than 0.
+# Use multi-sample antialiasing (MSAA) to smooth out block edges.
+# This algorithm smooths out the 3D viewport while keeping the image sharp,
+# but it doesn't affect the insides of textures
+# (which is especially noticeable with transparent textures).
+# This option is experimental and might cause visible spaces between blocks
+# when set above 0.
+# A restart is required after changing this option.
fsaa (FSAA) enum 0 0,1,2,4,8,16
-# Undersampling is similar to using lower screen resolution, but it applies
+# Undersampling is similar to using a lower screen resolution, but it applies
# to the game world only, keeping the GUI intact.
-# It should give significant performance boost at the cost of less detailed image.
-undersampling (Undersampling) enum 0 0,2,3,4
+# It should give a significant performance boost at the cost of less detailed image.
+# Higher values result in a less detailed image.
+undersampling (Undersampling) int 1 1 8
[**Shaders]
-# Shaders allow advanced visual effects and may increase performance on some video cards.
+# Shaders allow advanced visual effects and may increase performance on some video
+# cards.
# This only works with the OpenGL video backend.
enable_shaders (Shaders) bool true
[***Tone Mapping]
-# Enables filmic tone mapping
+# Enables Hable's 'Uncharted 2' filmic tone mapping.
+# Simulates the tone curve of photographic film and how this approximates the
+# appearance of high dynamic range images. Mid-range contrast is slightly
+# enhanced, highlights and shadows are gradually compressed.
tone_mapping (Filmic tone mapping) bool false
-[***Bumpmapping]
-
-# Enables bumpmapping for textures. Normalmaps need to be supplied by the texture pack
-# or need to be auto-generated.
-# Requires shaders to be enabled.
-enable_bumpmapping (Bumpmapping) bool false
-
-# Enables on the fly normalmap generation (Emboss effect).
-# Requires bumpmapping to be enabled.
-generate_normalmaps (Generate normalmaps) bool false
-
-# Strength of generated normalmaps.
-normalmaps_strength (Normalmaps strength) float 0.6
-
-# Defines sampling step of texture.
-# A higher value results in smoother normal maps.
-normalmaps_smooth (Normalmaps sampling) int 0 0 2
-
-[***Parallax Occlusion]
-
-# Enables parallax occlusion mapping.
-# Requires shaders to be enabled.
-enable_parallax_occlusion (Parallax occlusion) bool false
-
-# 0 = parallax occlusion with slope information (faster).
-# 1 = relief mapping (slower, more accurate).
-parallax_occlusion_mode (Parallax occlusion mode) int 1 0 1
-
-# Strength of parallax.
-3d_paralax_strength (Parallax occlusion strength) float 0.025
-
-# Number of parallax occlusion iterations.
-parallax_occlusion_iterations (Parallax occlusion iterations) int 4
-
-# Overall scale of parallax occlusion effect.
-parallax_occlusion_scale (Parallax occlusion scale) float 0.08
-
-# Overall bias of parallax occlusion effect, usually scale/2.
-parallax_occlusion_bias (Parallax occlusion bias) float 0.04
-
[***Waving Nodes]
-# Set to true enables waving water.
+# Set to true to enable waving liquids (like water).
# Requires shaders to be enabled.
-enable_waving_water (Waving water) bool false
+enable_waving_water (Waving liquids) bool false
-water_wave_height (Waving water height) float 1.0
+# The maximum height of the surface of waving liquids.
+# 4.0 = Wave height is two nodes.
+# 0.0 = Wave doesn't move at all.
+# Default is 1.0 (1/2 node).
+# Requires waving liquids to be enabled.
+water_wave_height (Waving liquids wave height) float 1.0 0.0 4.0
-water_wave_length (Waving water length) float 20.0
+# Length of liquid waves.
+# Requires waving liquids to be enabled.
+water_wave_length (Waving liquids wavelength) float 20.0 0.1
-water_wave_speed (Waving water speed) float 5.0
+# How fast liquid waves will move. Higher = faster.
+# If negative, liquid waves will move backwards.
+# Requires waving liquids to be enabled.
+water_wave_speed (Waving liquids wave speed) float 5.0
-# Set to true enables waving leaves.
+# Set to true to enable waving leaves.
# Requires shaders to be enabled.
enable_waving_leaves (Waving leaves) bool false
-# Set to true enables waving plants.
+# Set to true to enable waving plants.
# Requires shaders to be enabled.
enable_waving_plants (Waving plants) bool false
# If FPS would go higher than this, limit it by sleeping
# to not waste CPU power for no benefit.
-fps_max (Maximum FPS) int 60
+fps_max (Maximum FPS) int 60 1
-# Maximum FPS when game is paused.
-pause_fps_max (FPS in pause menu) int 20
+# Maximum FPS when the window is not focused, or when the game is paused.
+fps_max_unfocused (FPS when unfocused or paused) int 20 1
-# Open the pause menu when the window's focus is lost. Does not pause if a formspec is open.
+# Open the pause menu when the window's focus is lost. Does not pause if a formspec is
+# open.
pause_on_lost_focus (Pause on lost window focus) bool false
# View distance in nodes.
-viewing_range (Viewing range) int 100 20 4000
+viewing_range (Viewing range) int 190 20 4000
-# Camera near plane distance in nodes, between 0 and 0.5
-# Most users will not need to change this.
+# Camera 'near clipping plane' distance in nodes, between 0 and 0.25
+# Only works on GLES platforms. Most users will not need to change this.
# Increasing can reduce artifacting on weaker GPUs.
# 0.1 = Default, 0.25 = Good value for weaker tablets.
-near_plane (Near plane) float 0.1 0 0.5
+near_plane (Near plane) float 0.1 0 0.25
# Width component of the initial window size.
-screen_w (Screen width) int 1024
+screen_w (Screen width) int 1024 1
# Height component of the initial window size.
-screen_h (Screen height) int 600
+screen_h (Screen height) int 600 1
# Save window size automatically when modified.
autosave_screensize (Autosave screen size) bool true
fullscreen_bpp (Full screen BPP) int 24
# Vertical screen synchronization.
-vsync (V-Sync) bool false
+vsync (VSync) bool false
# Field of view in degrees.
fov (Field of view) int 72 45 160
-# Adjust the gamma encoding for the light tables. Higher numbers are brighter.
-# This setting is for the client only and is ignored by the server.
-display_gamma (Gamma) float 1.0 0.5 3.0
+# Alters the light curve by applying 'gamma correction' to it.
+# Higher values make middle and lower light levels brighter.
+# Value '1.0' leaves the light curve unaltered.
+# This only has significant effect on daylight and artificial
+# light, it has very little effect on natural night light.
+display_gamma (Light curve gamma) float 1.0 0.33 3.0
# Gradient of light curve at minimum light level.
-lighting_alpha (Darkness sharpness) float 0.0 0.0 4.0
+# Controls the contrast of the lowest light levels.
+lighting_alpha (Light curve low gradient) float 0.0 0.0 3.0
# Gradient of light curve at maximum light level.
-lighting_beta (Lightness sharpness) float 1.5 0.0 4.0
+# Controls the contrast of the highest light levels.
+lighting_beta (Light curve high gradient) float 1.5 0.0 3.0
-# Strength of light curve mid-boost.
-lighting_boost (Light curve mid boost) float 0.2 0.0 1.0
+# Strength of light curve boost.
+# The 3 'boost' parameters define a range of the light
+# curve that is boosted in brightness.
+lighting_boost (Light curve boost) float 0.2 0.0 0.4
-# Center of light curve mid-boost.
-lighting_boost_center (Light curve mid boost center) float 0.5 0.0 1.0
+# Center of light curve boost range.
+# Where 0.0 is minimum light level, 1.0 is maximum light level.
+lighting_boost_center (Light curve boost center) float 0.5 0.0 1.0
-# Spread of light curve mid-boost.
-# Standard deviation of the mid-boost gaussian.
-lighting_boost_spread (Light curve mid boost spread) float 0.2 0.0 1.0
+# Spread of light curve boost range.
+# Controls the width of the range to be boosted.
+# Standard deviation of the light curve boost Gaussian.
+lighting_boost_spread (Light curve boost spread) float 0.2 0.0 0.4
# Path to texture directory. All textures are first searched from here.
texture_path (Texture path) path
# The rendering back-end for Irrlicht.
+# A restart is required after changing this.
+# Note: On Android, stick with OGLES1 if unsure! App may fail to start otherwise.
+# On other platforms, OpenGL is recommended.
+# Shaders are supported by OpenGL (desktop only) and OGLES2 (experimental)
video_driver (Video driver) enum opengl null,software,burningsvideo,direct3d8,direct3d9,opengl,ogles1,ogles2
# Radius of cloud area stated in number of 64 node cloud squares.
# Multiplier for fall bobbing.
# For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
-fall_bobbing_amount (Fall bobbing factor) float 0.0
+fall_bobbing_amount (Fall bobbing factor) float 0.03
# 3D support.
# Currently supported:
# Note that the interlaced mode requires shaders to be enabled.
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,crossview,pageflip
+# Strength of 3D mode parallax.
+3d_paralax_strength (3D mode parallax strength) float 0.025
+
# In-game chat console height, between 0.1 (10%) and 1.0 (100%).
console_height (Console height) float 0.6 0.1 1.0
# Selection box border color (R,G,B).
selectionbox_color (Selection box color) string (0,0,0)
-# Width of the selectionbox's lines around nodes.
+# Width of the selection box lines around nodes.
selectionbox_width (Selection box width) int 2 1 5
# Crosshair color (R,G,B).
+# Also controls the object crosshair color
crosshair_color (Crosshair color) string (255,255,255)
# Crosshair alpha (opaqueness, between 0 and 255).
+# Also controls the object crosshair color
crosshair_alpha (Crosshair alpha) int 255 0 255
# Maximum number of recent chat messages to show
# Size of the MapBlock cache of the mesh generator. Increasing this will
# increase the cache hit %, reducing the data being copied from the main
# thread, thus reducing jitter.
-meshgen_block_cache_size (Mapblock mesh generator's MapBlock cache size MB) int 20 0 1000
+meshgen_block_cache_size (Mapblock mesh generator's MapBlock cache size in MB) int 20 0 1000
# Enables minimap.
enable_minimap (Minimap) bool true
# True = 256
# False = 128
-# Useable to make minimap smoother on slower machines.
+# Usable to make minimap smoother on slower machines.
minimap_double_scan_height (Minimap scan height) bool true
# Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
# Enables animation of inventory items.
inventory_items_animations (Inventory items animations) bool false
-# Android systems only: Tries to create inventory textures from meshes
-# when no supported render was found.
-inventory_image_hack (Inventory image hack) bool false
-
# Fraction of the visible distance at which fog starts to be rendered
fog_start (Fog start) float 0.4 0.0 0.99
# a specially-designed texture pack; with this option, the client tries
# to determine the scale automatically basing on the texture size.
# See also texture_min_size.
-# Warning: this option is EXPERIMENTAL!
+# Warning: This option is EXPERIMENTAL!
autoscale_mode (Autoscaling mode) enum disable disable,enable,force
# Show entity selection boxes
-show_entity_selectionbox (Show entity selection boxes) bool true
+# A restart is required after changing this.
+show_entity_selectionbox (Show entity selection boxes) bool false
[*Menus]
# Use a cloud animation for the main menu background.
menu_clouds (Clouds in menu) bool true
-# Scale gui by a user specified value.
+# Scale GUI by a user specified value.
# Use a nearest-neighbor-anti-alias filter to scale the GUI.
# This will smooth over some of the rough edges, and blend
# pixels when scaling down, at the cost of blurring some
# edge pixels when images are scaled by non-integer sizes.
-gui_scaling (GUI scaling) float 1.0
+gui_scaling (GUI scaling) float 1.0 0.001
# When gui_scaling_filter is true, all GUI images need to be
# filtered in software, but some images are generated directly
# Append item name to tooltip.
tooltip_append_itemname (Append item name) bool false
-# Whether freetype fonts are used, requires freetype support to be compiled in.
-freetype (Freetype fonts) bool true
+# Whether FreeType fonts are used, requires FreeType support to be compiled in.
+# If disabled, bitmap and XML vectors fonts are used instead.
+freetype (FreeType fonts) bool true
-# Path to TrueTypeFont or bitmap.
-font_path (Font path) filepath fonts/liberationsans.ttf
+font_bold (Font bold by default) bool false
-font_size (Font size) int 16
+font_italic (Font italic by default) bool false
-# Font shadow offset, if 0 then shadow will not be drawn.
+# Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn.
font_shadow (Font shadow) int 1
-# Font shadow alpha (opaqueness, between 0 and 255).
+# Opaqueness (alpha) of the shadow behind the default font, between 0 and 255.
font_shadow_alpha (Font shadow alpha) int 127 0 255
-mono_font_path (Monospace font path) filepath fonts/liberationmono.ttf
+# Font size of the default font in point (pt).
+font_size (Font size) int 16 1
+
+# Path to the default font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# The fallback font will be used if the font cannot be loaded.
+font_path (Regular font path) filepath fonts/Arimo-Regular.ttf
+
+font_path_bold (Bold font path) filepath fonts/Arimo-Bold.ttf
+font_path_italic (Italic font path) filepath fonts/Arimo-Italic.ttf
+font_path_bolditalic (Bold and italic font path) filepath fonts/Arimo-BoldItalic.ttf
+
+# Font size of the monospace font in point (pt).
+mono_font_size (Monospace font size) int 15 1
+
+# Path to the monospace font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# This font is used for e.g. the console and profiler screen.
+mono_font_path (Monospace font path) filepath fonts/Cousine-Regular.ttf
-mono_font_size (Monospace font size) int 15
+mono_font_path_bold (Bold monospace font path) filepath fonts/Cousine-Bold.ttf
+mono_font_path_italic (Italic monospace font path) filepath fonts/Cousine-Italic.ttf
+mono_font_path_bolditalic (Bold and italic monospace font path) filepath fonts/Cousine-BoldItalic.ttf
-# This font will be used for certain languages.
-fallback_font_path (Fallback font) filepath fonts/DroidSansFallbackFull.ttf
-fallback_font_size (Fallback font size) int 15
+# Font size of the fallback font in point (pt).
+fallback_font_size (Fallback font size) int 15 1
+
+# Shadow offset (in pixels) of the fallback font. If 0, then shadow will not be drawn.
fallback_font_shadow (Fallback font shadow) int 1
+
+# Opaqueness (alpha) of the shadow behind the fallback font, between 0 and 255.
fallback_font_shadow_alpha (Fallback font shadow alpha) int 128 0 255
-# Path to save screenshots at.
-screenshot_path (Screenshot folder) path
+# Path of the fallback font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# This font will be used for certain languages or if the default font is unavailable.
+fallback_font_path (Fallback font path) filepath fonts/DroidSansFallbackFull.ttf
+
+# Font size of the recent chat text and chat prompt in point (pt).
+# Value 0 will use the default font size.
+chat_font_size (Chat font size) int 0
+
+# Path to save screenshots at. Can be an absolute or relative path.
+# The folder will be created if it doesn't already exist.
+screenshot_path (Screenshot folder) path screenshots
# Format of screenshots.
screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
[*Advanced]
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
-screen_dpi (DPI) int 72
+screen_dpi (DPI) int 72 1
# Windows systems only: Start Minetest with the command line window in the background.
# Contains the same information as the file debug.txt (default name).
[Sound]
+# Enables the sound system.
+# If disabled, this completely disables all sounds everywhere and the in-game
+# sound controls will be non-functional.
+# Changing this setting requires a restart.
enable_sound (Sound) bool true
+# Volume of all sounds.
+# Requires the sound system to be enabled.
sound_volume (Volume) float 0.7 0.0 1.0
+# Whether to mute sounds. You can unmute sounds at any time, unless the
+# sound system is disabled (enable_sound=false).
+# In-game, you can toggle the mute state with the mute key or by using the
+# pause menu.
mute_sound (Mute sound) bool false
[Client]
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Prometheus listener address.
+# If minetest is compiled with ENABLE_PROMETHEUS option enabled,
+# enable metrics listener for Prometheus on that address.
+# Metrics can be fetch on http://127.0.0.1:30000/metrics
+prometheus_listener_address (Prometheus listener address) string 127.0.0.1:30000
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
# URL to the server list displayed in the Multiplayer Tab.
serverlist_url (Serverlist URL) string servers.minetest.net
-# File in client/serverlist/ that contains your favorite servers displayed in the Multiplayer Tab.
+# File in client/serverlist/ that contains your favorite servers displayed in the
+# Multiplayer Tab.
serverlist_file (Serverlist file) string favoriteservers.txt
-# Maximum size of the out chat queue. 0 to disable queueing and -1 to make the queue size unlimited
+# Maximum size of the out chat queue.
+# 0 to disable queueing and -1 to make the queue size unlimited.
max_out_chat_queue_size (Maximum size of the out chat queue) int 20
+# Enable register confirmation when connecting to server.
+# If disabled, new account will be registered automatically.
+enable_register_confirmation (Enable register confirmation) bool true
+
[*Advanced]
# Timeout for client to remove unused map data from memory.
# Maximum number of mapblocks for client to be kept in memory.
# Set to -1 for unlimited amount.
-client_mapblock_limit (Mapblock limit) int 5000
+client_mapblock_limit (Mapblock limit) int 7500
# Whether to show the client debug info (has the same effect as hitting F5).
show_debug (Show debug info) bool false
server_address (Server address) string game.minetest.net
# Homepage of server, to be displayed in the serverlist.
-server_url (Server URL) string http://minetest.net
+server_url (Server URL) string https://minetest.net
-# Automaticaly report to the serverlist.
+# Automatically report to the serverlist.
server_announce (Announce server) bool false
# Announce to this serverlist.
serverlist_url (Serverlist URL) string servers.minetest.net
-# Remove color codes from incoming chat messages
-# Use this to stop players from being able to use color in their messages
+# Remove color codes from incoming chat messages
+# Use this to stop players from being able to use color in their messages
strip_color_codes (Strip color codes) bool false
[*Network]
# Files that are not present will be fetched the usual way.
remote_media (Remote media) string
-# Enable/disable running an IPv6 server. An IPv6 server may be restricted
-# to IPv6 clients, depending on system configuration.
+# Enable/disable running an IPv6 server.
# Ignored if bind_address is set.
+# Needs enable_ipv6 to be enabled.
ipv6_server (IPv6 server) bool false
[**Advanced]
# Maximum number of blocks that are simultaneously sent per client.
# The maximum total count is calculated dynamically:
# max_total = ceil((#clients + max_users) * per_client / 4)
-max_simultaneous_block_sends_per_client (Maximum simultaneous block sends per client) int 10
+max_simultaneous_block_sends_per_client (Maximum simultaneous block sends per client) int 40
# To reduce lag, block transfers are slowed down when a player is building something.
# This determines how long they are slowed down after placing or removing a node.
# Message of the day displayed to players connecting.
motd (Message of the day) string
-# Maximum number of players that can connect simultaneously.
+# Maximum number of players that can be connected simultaneously.
max_users (Maximum users) int 15
# World directory (everything in the world is stored here).
# Setting it to -1 disables the feature.
item_entity_ttl (Item entity TTL) int 900
+# Specifies the default stack size of nodes, items and tools.
+# Note that mods or games may explicitly set a stack for certain (or all) items.
+default_stack_max (Default stack size) int 99
+
# Enable players getting damage and dying.
enable_damage (Damage) bool false
# This option is only read when server starts.
enable_rollback_recording (Rollback recording) bool false
+# Format of player chat messages. The following strings are valid placeholders:
+# @name, @message, @timestamp (optional)
+chat_message_format (Chat message format) string <@name> @message
+
# A message to be displayed to all clients when the server shuts down.
kick_msg_shutdown (Shutdown message) string Server shutting down.
# Setting this larger than active_block_range will also cause the server
# to maintain active objects up to this distance in the direction the
# player is looking. (This can avoid mobs suddenly disappearing from view)
-active_object_send_range_blocks (Active object send range) int 3
+active_object_send_range_blocks (Active object send range) int 8
-# How large area of blocks are subject to the active block stuff, stated in mapblocks (16 nodes).
+# The radius of the volume of blocks around every player that is subject to the
+# active block stuff, stated in mapblocks (16 nodes).
# In active blocks objects are loaded and ABMs run.
# This is also the minimum range in which active objects (mobs) are maintained.
-# This should be configured together with active_object_range.
-active_block_range (Active block range) int 3
+# This should be configured together with active_object_send_range_blocks.
+active_block_range (Active block range) int 4
# From how far blocks are sent to clients, stated in mapblocks (16 nodes).
-max_block_send_distance (Max block send distance) int 9
+max_block_send_distance (Max block send distance) int 12
# Maximum number of forceloaded mapblocks.
max_forceloaded_blocks (Maximum forceloaded blocks) int 16
time_send_interval (Time send interval) int 5
# Controls length of day/night cycle.
-# Examples: 72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
+# Examples:
+# 72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
time_speed (Time speed) int 72
# Time of day when a new world is started, in millihours (0-23999).
-world_start_time (World start time) int 5250 0 23999
+world_start_time (World start time) int 6125 0 23999
# Interval of saving important changes in the world, stated in seconds.
server_map_save_interval (Map save interval) float 5.3
# Set the maximum character length of a chat message sent by clients.
-# chat_message_max_size int 500
+chat_message_max_size (Chat message max length) int 500
-# Limit a single player to send X messages per 10 seconds.
-# chat_message_limit_per_10sec float 10.0
+# Amount of messages a player may send per 10 seconds.
+chat_message_limit_per_10sec (Chat message count limit) float 10.0
-# Kick player if send more than X messages per 10 seconds.
-# chat_message_limit_trigger_kick int 50
+# Kick players who sent more than X messages per 10 seconds.
+chat_message_limit_trigger_kick (Chat message kick threshold) int 50
[**Physics]
+# Horizontal and vertical acceleration on ground or when climbing,
+# in nodes per second per second.
movement_acceleration_default (Default acceleration) float 3
+
+# Horizontal acceleration in air when jumping or falling,
+# in nodes per second per second.
movement_acceleration_air (Acceleration in air) float 2
+
+# Horizontal and vertical acceleration in fast mode,
+# in nodes per second per second.
movement_acceleration_fast (Fast mode acceleration) float 10
+
+# Walking and flying speed, in nodes per second.
movement_speed_walk (Walking speed) float 4
-movement_speed_crouch (Crouch speed) float 1.35
+
+# Sneaking speed, in nodes per second.
+movement_speed_crouch (Sneaking speed) float 1.35
+
+# Walking, flying and climbing speed in fast mode, in nodes per second.
movement_speed_fast (Fast mode speed) float 20
+
+# Vertical climbing speed, in nodes per second.
movement_speed_climb (Climbing speed) float 3
+
+# Initial vertical speed when jumping, in nodes per second.
movement_speed_jump (Jumping speed) float 6.5
+
+# Decrease this to increase liquid resistance to movement.
movement_liquid_fluidity (Liquid fluidity) float 1
+
+# Maximum liquid resistance. Controls deceleration when entering liquid at
+# high speed.
movement_liquid_fluidity_smooth (Liquid fluidity smoothing) float 0.5
-movement_liquid_sink (Liquid sink) float 10
+
+# Controls sinking speed in liquid.
+movement_liquid_sink (Liquid sinking) float 10
+
+# Acceleration of gravity, in nodes per second per second.
movement_gravity (Gravity) float 9.81
[**Advanced]
-# Handling for deprecated lua api calls:
-# - legacy: (try to) mimic old behaviour (default for release).
-# - log: mimic and log backtrace of deprecated call (default for debug).
+# Handling for deprecated Lua API calls:
+# - none: Do not log deprecated calls
+# - log: mimic and log backtrace of deprecated call (default).
# - error: abort on usage of deprecated call (suggested for mod developers).
-deprecated_lua_api_handling (Deprecated Lua API handling) enum legacy legacy,log,error
+deprecated_lua_api_handling (Deprecated Lua API handling) enum log none,log,error
# Number of extra blocks that can be loaded by /clearobjects at once.
# This is a trade-off between sqlite transaction overhead and
# Maximum number of statically stored objects in a block.
max_objects_per_block (Maximum objects per block) int 64
-# See http://www.sqlite.org/pragma.html#pragma_synchronous
+# See https://www.sqlite.org/pragma.html#pragma_synchronous
sqlite_synchronous (Synchronous SQLite) enum 2 0,1,2
-# Length of a server tick and the interval at which objects are generally updated over network.
+# Length of a server tick and the interval at which objects are generally updated over
+# network.
dedicated_server_step (Dedicated server step) float 0.09
-# Time in between active block management cycles
-active_block_mgmt_interval (Active Block Management interval) float 2.0
+# Length of time between active block management cycles
+active_block_mgmt_interval (Active block management interval) float 2.0
+
+# Length of time between Active Block Modifier (ABM) execution cycles
+abm_interval (ABM interval) float 1.0
-# Length of time between ABM execution cycles
-abm_interval (Active Block Modifier interval) float 1.0
+# The time budget allowed for ABMs to execute on each step
+# (as a fraction of the ABM Interval)
+abm_time_budget (ABM time budget) float 0.2 0.1 0.9
# Length of time between NodeTimer execution cycles
nodetimer_interval (NodeTimer interval) float 0.2
# Liquid update interval in seconds.
liquid_update (Liquid update tick) float 1.0
-# At this distance the server will aggressively optimize which blocks are sent to clients.
-# Small values potentially improve performance a lot, at the expense of visible rendering glitches.
-# (some blocks will not be rendered under water and in caves, as well as sometimes on land)
-# Setting this to a value greater than max_block_send_distance disables this optimization.
-# Stated in mapblocks (16 nodes)
+# At this distance the server will aggressively optimize which blocks are sent to
+# clients.
+# Small values potentially improve performance a lot, at the expense of visible
+# rendering glitches (some blocks will not be rendered under water and in caves,
+# as well as sometimes on land).
+# Setting this to a value greater than max_block_send_distance disables this
+# optimization.
+# Stated in mapblocks (16 nodes).
block_send_optimize_distance (Block send optimize distance) int 4 2
# If enabled the server will perform map block occlusion culling based on
# so that the utility of noclip mode is reduced.
server_side_occlusion_culling (Server side occlusion culling) bool true
-# Restricts the access of certain client-side functions on servers
-# Combine these byteflags below to restrict more client-side features:
-# LOAD_CLIENT_MODS: 1 (disable client mods loading)
+# Restricts the access of certain client-side functions on servers.
+# Combine the byteflags below to restrict client-side features, or set to 0
+# for no restrictions:
+# LOAD_CLIENT_MODS: 1 (disable loading client-provided mods)
# CHAT_MESSAGES: 2 (disable send_chat_message call client-side)
# READ_ITEMDEFS: 4 (disable get_item_def call client-side)
# READ_NODEDEFS: 8 (disable get_node_def call client-side)
-# LOOKUP_NODES_LIMIT: 16 (limits get_node call client-side to csm_restriction_noderange)
-csm_restriction_flags (Client side modding restrictions) int 18
+# LOOKUP_NODES_LIMIT: 16 (limits get_node call client-side to
+# csm_restriction_noderange)
+# READ_PLAYERINFO: 32 (disable get_player_names call client-side)
+csm_restriction_flags (Client side modding restrictions) int 62
# If the CSM restriction for node range is enabled, get_node calls are limited
# to this distance from the player to the node.
-csm_restriction_noderange (Client side node lookup range restriction) int 8
+csm_restriction_noderange (Client side node lookup range restriction) int 0
[*Security]
# functions even when mod security is on (via request_insecure_environment()).
secure.trusted_mods (Trusted mods) string
-# Comma-separated list of mods that are allowed to access HTTP APIs, which
-# allow them to upload and download data to/from the internet.
+# Comma-separated list of mods that are allowed to access HTTP APIs, which
+# allow them to upload and download data to/from the internet.
secure.http_mods (HTTP mods) string
[*Advanced]
# Set the language. Leave empty to use the system language.
# A restart is required after changing this.
-language (Language) enum ,be,ca,cs,da,de,dv,en,eo,es,et,fr,he,hu,id,it,ja,jbo,ko,ky,lt,ms,nb,nl,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,tr,uk,zh_CN,zh_TW
-
+language (Language) enum ,ar,ca,cs,da,de,dv,el,en,eo,es,et,eu,fil,fr,hu,id,it,ja,ja_KS,jbo,kk,kn,lo,lt,ms,my,nb,nl,nn,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,th,tr,uk,vi
# Level of logging to be written to debug.txt:
# - <nothing> (no logging)
# - verbose
debug_log_level (Debug log level) enum action ,none,error,warning,action,info,verbose
-# IPv6 support.
+# If the file size of debug.txt exceeds the number of megabytes specified in
+# this setting when it is opened, the file is moved to debug.txt.1,
+# deleting an older debug.txt.1 if it exists.
+# debug.txt is only moved if this setting is positive.
+debug_log_size_max (Debug log file size threshold) int 50
+
+# Minimal level of logging to be written to chat.
+chat_log_level (Chat log level) enum error ,none,error,warning,action,info,verbose
+
+# Enable IPv6 support (for both client and server).
+# Required for IPv6 connections to work at all.
enable_ipv6 (IPv6) bool true
[*Advanced]
# Makes DirectX work with LuaJIT. Disable if it causes troubles.
high_precision_fpu (High-precision FPU) bool true
-# Changes the main menu UI:
-# - Full: Multple singleplayer worlds, game choice, texture pack chooser, etc.
-# - Simple: One singleplayer world, no game or texture pack choosers. May be necessary for smaller screens.
-# - Auto: Simple on Android, full on everything else.
-main_menu_style (Main menu style) enum auto auto,full,simple
-
# Replaces the default main menu with a custom one.
main_menu_script (Main menu script) string
-main_menu_game_mgr (Main menu game manager) int 0
-
-main_menu_mod_mgr (Main menu mod manager) int 1
-
-# Print the engine's profiling data in regular intervals (in seconds). 0 = disable. Useful for developers.
+# Print the engine's profiling data in regular intervals (in seconds).
+# 0 = disable. Useful for developers.
profiler_print_interval (Engine profiling data print interval) int 0
[Mapgen]
# Name of map generator to be used when creating a new world.
# Creating a world in the main menu will override this.
-mg_name (Mapgen name) enum v7 v5,v6,v7,flat,valleys,fractal,singlenode
+# Current mapgens in a highly unstable state:
+# - The optional floatlands of v7 (disabled by default).
+mg_name (Mapgen name) enum v7 v7,valleys,carpathian,v5,flat,fractal,singlenode,v6
# Water surface level of the world.
water_level (Water level) int 1
# From how far blocks are generated for clients, stated in mapblocks (16 nodes).
-max_block_generate_distance (Max block generate distance) int 6
+max_block_generate_distance (Max block generate distance) int 10
# Limit of map generation, in nodes, in all 6 directions from (0, 0, 0).
# Only mapchunks completely within the mapgen limit are generated.
# Global map generation attributes.
# In Mapgen v6 the 'decorations' flag controls all decorations except trees
# and junglegrass, in all other mapgens this flag controls all decorations.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
-mg_flags (Mapgen flags) flags caves,dungeons,light,decorations,biomes caves,dungeons,light,decorations,biomes,nocaves,nodungeons,nolight,nodecorations,nobiomes
-
-# Whether dungeons occasionally project from the terrain.
-projecting_dungeons (Projecting dungeons) bool true
+mg_flags (Mapgen flags) flags caves,dungeons,light,decorations,biomes,ores caves,dungeons,light,decorations,biomes,ores,nocaves,nodungeons,nolight,nodecorations,nobiomes,noores
[*Biome API temperature and humidity noise parameters]
[*Mapgen V5]
# Map generation attributes specific to Mapgen v5.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
mgv5_spflags (Mapgen V5 specific flags) flags caverns caverns,nocaverns
# Controls width of tunnels, a smaller value creates wider tunnels.
-mgv5_cave_width (Cave width) float 0.125
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
+mgv5_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgv5_large_cave_depth (Large cave depth) int -256
-# Y of upper limit of lava in large caves.
-mgv5_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgv5_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgv5_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgv5_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgv5_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgv5_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgv5_cavern_limit (Cavern limit) int -256
# Y-level of average terrain surface.
mgv5_np_height (Height noise) noise_params_2d 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0, eased
-# First of 2 3D noises that together define tunnels.
-mgv5_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (50, 50, 50), 52534, 4, 0.5, 2.0
+# First of two 3D noises that together define tunnels.
+mgv5_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Second of 2 3D noises that together define tunnels.
-mgv5_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (50, 50, 50), 10325, 4, 0.5, 2.0
+# Second of two 3D noises that together define tunnels.
+mgv5_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
# 3D noise defining giant caverns.
mgv5_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
# 3D noise defining terrain.
mgv5_np_ground (Ground noise) noise_params_3d 0, 40, (80, 80, 80), 983240, 4, 0.55, 2.0, eased
+# 3D noise that determines number of dungeons per mapchunk.
+mgv5_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen V6]
# Map generation attributes specific to Mapgen v6.
# The 'snowbiomes' flag enables the new 5 biome system.
-# When the new biome system is enabled jungles are automatically enabled and
+# When the 'snowbiomes' flag is enabled jungles are automatically enabled and
# the 'jungles' flag is ignored.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
-mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
+mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,noflat,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
# Deserts occur when np_biome exceeds this value.
-# When the new biome system is enabled, this is ignored.
+# When the 'snowbiomes' flag is enabled, this is ignored.
mgv6_freq_desert (Desert noise threshold) float 0.45
# Sandy beaches occur when np_beach exceeds this value.
[**Noises]
-# Y-level of lower terrain and lakebeds.
+# Y-level of lower terrain and seabed.
mgv6_np_terrain_base (Terrain base noise) noise_params_2d -4, 20, (250, 250, 250), 82341, 5, 0.6, 2.0, eased
-# Y-level of higher (cliff-top) terrain.
+# Y-level of higher terrain that creates cliffs.
mgv6_np_terrain_higher (Terrain higher noise) noise_params_2d 20, 16, (500, 500, 500), 85039, 5, 0.6, 2.0, eased
# Varies steepness of cliffs.
mgv6_np_steepness (Steepness noise) noise_params_2d 0.85, 0.5, (125, 125, 125), -932, 5, 0.7, 2.0, eased
-# Defines areas of 'terrain_higher' (cliff-top terrain).
+# Defines distribution of higher terrain.
mgv6_np_height_select (Height select noise) noise_params_2d 0.5, 1, (250, 250, 250), 4213, 5, 0.69, 2.0, eased
# Varies depth of biome surface nodes.
[*Mapgen V7]
# Map generation attributes specific to Mapgen v7.
-# 'ridges' enables the rivers.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
+# 'ridges': Rivers.
+# 'floatlands': Floating land masses in the atmosphere.
+# 'caverns': Giant caves deep underground.
mgv7_spflags (Mapgen V7 specific flags) flags mountains,ridges,nofloatlands,caverns mountains,ridges,floatlands,caverns,nomountains,noridges,nofloatlands,nocaverns
# Y of mountain density gradient zero level. Used to shift mountains vertically.
mgv7_mount_zero_level (Mountain zero level) int 0
+# Lower Y limit of floatlands.
+mgv7_floatland_ymin (Floatland minimum Y) int 1024
+
+# Upper Y limit of floatlands.
+mgv7_floatland_ymax (Floatland maximum Y) int 4096
+
+# Y-distance over which floatlands taper from full density to nothing.
+# Tapering starts at this distance from the Y limit.
+# For a solid floatland layer, this controls the height of hills/mountains.
+# Must be less than or equal to half the distance between the Y limits.
+mgv7_floatland_taper (Floatland tapering distance) int 256
+
+# Exponent of the floatland tapering. Alters the tapering behaviour.
+# Value = 1.0 creates a uniform, linear tapering.
+# Values > 1.0 create a smooth tapering suitable for the default separated
+# floatlands.
+# Values < 1.0 (for example 0.25) create a more defined surface level with
+# flatter lowlands, suitable for a solid floatland layer.
+mgv7_float_taper_exp (Floatland taper exponent) float 2.0
+
+# Adjusts the density of the floatland layer.
+# Increase value to increase density. Can be positive or negative.
+# Value = 0.0: 50% of volume is floatland.
+# Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test
+# to be sure) creates a solid floatland layer.
+mgv7_floatland_density (Floatland density) float -0.6
+
+# Surface level of optional water placed on a solid floatland layer.
+# Water is disabled by default and will only be placed if this value is set
+# to above 'mgv7_floatland_ymax' - 'mgv7_floatland_taper' (the start of the
+# upper tapering).
+# ***WARNING, POTENTIAL DANGER TO WORLDS AND SERVER PERFORMANCE***:
+# When enabling water placement the floatlands must be configured and tested
+# to be a solid layer by setting 'mgv7_floatland_density' to 2.0 (or other
+# required value depending on 'mgv7_np_floatland'), to avoid
+# server-intensive extreme water flow and to avoid vast flooding of the
+# world surface below.
+mgv7_floatland_ywater (Floatland water level) int -31000
+
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgv7_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgv7_large_cave_depth (Large cave depth) int -33
-# Y of upper limit of lava in large caves.
-mgv7_lava_depth (Lava depth) int -256
-
-# Controls the density of mountain-type floatlands.
-# Is a noise offset added to the 'mgv7_np_mountain' noise value.
-mgv7_float_mount_density (Floatland mountain density) float 0.6
+# Minimum limit of random number of small caves per mapchunk.
+mgv7_small_cave_num_min (Small cave minimum number) int 0 0 256
-# Typical maximum height, above and below midpoint, of floatland mountains.
-mgv7_float_mount_height (Floatland mountain height) float 128.0
+# Maximum limit of random number of small caves per mapchunk.
+mgv7_small_cave_num_max (Small cave maximum number) int 0 0 256
-# Alters how mountain-type floatlands taper above and below midpoint.
-mgv7_float_mount_exponent (Floatland mountain exponent) float 0.75
+# Minimum limit of random number of large caves per mapchunk.
+mgv7_large_cave_num_min (Large cave minimum number) int 0 0 64
-# Y-level of floatland midpoint and lake surface.
-mgv7_floatland_level (Floatland level) int 1280
+# Maximum limit of random number of large caves per mapchunk.
+mgv7_large_cave_num_max (Large cave maximum number) int 2 0 64
-# Y-level to which floatland shadows extend.
-mgv7_shadow_limit (Shadow limit) int 1024
+# Proportion of large caves that contain liquid.
+mgv7_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgv7_cavern_limit (Cavern limit) int -256
[**Noises]
-# Y-level of higher (cliff-top) terrain.
+# Y-level of higher terrain that creates cliffs.
mgv7_np_terrain_base (Terrain base noise) noise_params_2d 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0, eased
-# Y-level of lower terrain and lakebeds.
-mgv7_np_terrain_alt (Terrain alt noise) noise_params_2d 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0, eased
+# Y-level of lower terrain and seabed.
+mgv7_np_terrain_alt (Terrain alternative noise) noise_params_2d 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0, eased
# Varies roughness of terrain.
# Defines the 'persistence' value for terrain_base and terrain_alt noises.
mgv7_np_terrain_persist (Terrain persistence noise) noise_params_2d 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0, eased
-# Defines areas of higher (cliff-top) terrain and affects steepness of cliffs.
+# Defines distribution of higher terrain and steepness of cliffs.
mgv7_np_height_select (Height select noise) noise_params_2d -8, 16, (500, 500, 500), 4213, 6, 0.7, 2.0, eased
# Variation of biome filler depth.
# Defines large-scale river channel structure.
mgv7_np_ridge_uwater (Ridge underwater noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
-# Defines areas of floatland smooth terrain.
-# Smooth floatlands occur when noise > 0.
-mgv7_np_floatland_base (Floatland base noise) noise_params_2d -0.6, 1.5, (600, 600, 600), 114, 5, 0.6, 2.0, eased
-
-# Variation of hill height and lake depth on floatland smooth terrain.
-mgv7_np_float_base_height (Floatland base height noise) noise_params_2d 48, 24, (300, 300, 300), 907, 4, 0.7, 2.0, eased
-
# 3D noise defining mountain structure and height.
# Also defines structure of floatland mountain terrain.
mgv7_np_mountain (Mountain noise) noise_params_3d -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
# 3D noise defining structure of river canyon walls.
mgv7_np_ridge (Ridge noise) noise_params_3d 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
+# 3D noise defining structure of floatlands.
+# If altered from the default, the noise 'scale' (0.7 by default) may need
+# to be adjusted, as floatland tapering functions best when this noise has
+# a value range of approximately -2.0 to 2.0.
+mgv7_np_floatland (Floatland noise) noise_params_3d 0, 0.7, (384, 96, 384), 1009, 4, 0.75, 1.618
+
# 3D noise defining giant caverns.
mgv7_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
-# First of 2 3D noises that together define tunnels.
+# First of two 3D noises that together define tunnels.
mgv7_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Second of 2 3D noises that together define tunnels.
+# Second of two 3D noises that together define tunnels.
mgv7_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgv7_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Carpathian]
# Map generation attributes specific to Mapgen Carpathian.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
-mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns caverns,nocaverns
+mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns,norivers caverns,rivers,nocaverns,norivers
# Defines the base ground level.
mgcarpathian_base_level (Base ground level) float 12.0
+# Defines the width of the river channel.
+mgcarpathian_river_width (River channel width) float 0.05
+
+# Defines the depth of the river channel.
+mgcarpathian_river_depth (River channel depth) float 24.0
+
+# Defines the width of the river valley.
+mgcarpathian_valley_width (River valley width) float 0.25
+
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgcarpathian_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgcarpathian_large_cave_depth (Large cave depth) int -33
-# Y of upper limit of lava in large caves.
-mgcarpathian_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgcarpathian_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgcarpathian_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgcarpathian_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgcarpathian_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgcarpathian_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgcarpathian_cavern_limit (Cavern limit) int -256
# Fourth of 4 2D noises that together define hill/mountain range height.
mgcarpathian_np_height4 (Hilliness4 noise) noise_params_2d 0, 5, (631, 631, 631), 1583, 5, 0.5, 2.0, eased
-# 2D noise that controls the size/occurance of rolling hills.
+# 2D noise that controls the size/occurrence of rolling hills.
mgcarpathian_np_hills_terrain (Rolling hills spread noise) noise_params_2d 1, 1, (1301, 1301, 1301), 1692, 3, 0.5, 2.0, eased
-# 2D noise that controls the size/occurance of ridged mountain ranges.
+# 2D noise that controls the size/occurrence of ridged mountain ranges.
mgcarpathian_np_ridge_terrain (Ridge mountain spread noise) noise_params_2d 1, 1, (1889, 1889, 1889), 3568, 3, 0.5, 2.0, eased
-# 2D noise that controls the size/occurance of step mountain ranges.
+# 2D noise that controls the size/occurrence of step mountain ranges.
mgcarpathian_np_step_terrain (Step mountain spread noise) noise_params_2d 1, 1, (1889, 1889, 1889), 4157, 3, 0.5, 2.0, eased
# 2D noise that controls the shape/size of rolling hills.
# 2D noise that controls the shape/size of step mountains.
mgcarpathian_np_step_mnt (Step mountain size noise) noise_params_2d 0, 8, (509, 509, 509), 2590, 6, 0.6, 2.0, eased
+# 2D noise that locates the river valleys and channels.
+mgcarpathian_np_rivers (River noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
+
# 3D noise for mountain overhangs, cliffs, etc. Usually small variations.
mgcarpathian_np_mnt_var (Mountain variation noise) noise_params_3d 0, 1, (499, 499, 499), 2490, 5, 0.55, 2.0
-# First of 2 3D noises that together define tunnels.
+# First of two 3D noises that together define tunnels.
mgcarpathian_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Second of 2 3D noises that together define tunnels.
+# Second of two 3D noises that together define tunnels.
mgcarpathian_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
# 3D noise defining giant caverns.
mgcarpathian_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgcarpathian_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Flat]
-# Map generation attributes specific to Mapgen flat.
+# Map generation attributes specific to Mapgen Flat.
# Occasional lakes and hills can be added to the flat world.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
-mgflat_spflags (Mapgen Flat specific flags) flags nolakes,nohills lakes,hills,nolakes,nohills
+mgflat_spflags (Mapgen Flat specific flags) flags nolakes,nohills,nocaverns lakes,hills,caverns,nolakes,nohills,nocaverns
# Y of flat ground.
mgflat_ground_level (Ground level) int 8
# Y of upper limit of large caves.
mgflat_large_cave_depth (Large cave depth) int -33
-# Y of upper limit of lava in large caves.
-mgflat_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgflat_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgflat_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgflat_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgflat_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgflat_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgflat_cave_width (Cave width) float 0.09
# Terrain noise threshold for lakes.
# Controls steepness/height of hills.
mgflat_hill_steepness (Hill steepness) float 64.0
+# Y-level of cavern upper limit.
+mgflat_cavern_limit (Cavern limit) int -256
+
+# Y-distance over which caverns expand to full size.
+mgflat_cavern_taper (Cavern taper) int 256
+
+# Defines full size of caverns, smaller values create larger caverns.
+mgflat_cavern_threshold (Cavern threshold) float 0.7
+
# Lower Y limit of dungeons.
mgflat_dungeon_ymin (Dungeon minimum Y) int -31000
# Variation of biome filler depth.
mgflat_np_filler_depth (Filler depth noise) noise_params_2d 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0, eased
-# First of 2 3D noises that together define tunnels.
+# First of two 3D noises that together define tunnels.
mgflat_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Second of 2 3D noises that together define tunnels.
+# Second of two 3D noises that together define tunnels.
mgflat_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise defining giant caverns.
+mgflat_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+
+# 3D noise that determines number of dungeons per mapchunk.
+mgflat_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Fractal]
+# Map generation attributes specific to Mapgen Fractal.
+# 'terrain' enables the generation of non-fractal terrain:
+# ocean, islands and underground.
+mgfractal_spflags (Mapgen Fractal specific flags) flags terrain terrain,noterrain
+
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgfractal_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgfractal_large_cave_depth (Large cave depth) int -33
-# Y of upper limit of lava in large caves.
-mgfractal_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgfractal_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgfractal_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgfractal_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgfractal_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgfractal_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Lower Y limit of dungeons.
mgfractal_dungeon_ymin (Dungeon minimum Y) int -31000
mgfractal_dungeon_ymax (Dungeon maximum Y) int 31000
# Selects one of 18 fractal types.
-# 1 = 4D "Roundy" mandelbrot set.
-# 2 = 4D "Roundy" julia set.
-# 3 = 4D "Squarry" mandelbrot set.
-# 4 = 4D "Squarry" julia set.
-# 5 = 4D "Mandy Cousin" mandelbrot set.
-# 6 = 4D "Mandy Cousin" julia set.
-# 7 = 4D "Variation" mandelbrot set.
-# 8 = 4D "Variation" julia set.
-# 9 = 3D "Mandelbrot/Mandelbar" mandelbrot set.
-# 10 = 3D "Mandelbrot/Mandelbar" julia set.
-# 11 = 3D "Christmas Tree" mandelbrot set.
-# 12 = 3D "Christmas Tree" julia set.
-# 13 = 3D "Mandelbulb" mandelbrot set.
-# 14 = 3D "Mandelbulb" julia set.
-# 15 = 3D "Cosine Mandelbulb" mandelbrot set.
-# 16 = 3D "Cosine Mandelbulb" julia set.
-# 17 = 4D "Mandelbulb" mandelbrot set.
-# 18 = 4D "Mandelbulb" julia set.
+# 1 = 4D "Roundy" Mandelbrot set.
+# 2 = 4D "Roundy" Julia set.
+# 3 = 4D "Squarry" Mandelbrot set.
+# 4 = 4D "Squarry" Julia set.
+# 5 = 4D "Mandy Cousin" Mandelbrot set.
+# 6 = 4D "Mandy Cousin" Julia set.
+# 7 = 4D "Variation" Mandelbrot set.
+# 8 = 4D "Variation" Julia set.
+# 9 = 3D "Mandelbrot/Mandelbar" Mandelbrot set.
+# 10 = 3D "Mandelbrot/Mandelbar" Julia set.
+# 11 = 3D "Christmas Tree" Mandelbrot set.
+# 12 = 3D "Christmas Tree" Julia set.
+# 13 = 3D "Mandelbulb" Mandelbrot set.
+# 14 = 3D "Mandelbulb" Julia set.
+# 15 = 3D "Cosine Mandelbulb" Mandelbrot set.
+# 16 = 3D "Cosine Mandelbulb" Julia set.
+# 17 = 4D "Mandelbulb" Mandelbrot set.
+# 18 = 4D "Mandelbulb" Julia set.
mgfractal_fractal (Fractal type) int 1 1 18
# Iterations of the recursive function.
# an island, set all 3 numbers equal for the raw shape.
mgfractal_scale (Scale) v3f (4096.0, 1024.0, 4096.0)
-# (X,Y,Z) offset of fractal from world centre in units of 'scale'.
-# Can be used to move a desired point to (0, 0): to create a
+# (X,Y,Z) offset of fractal from world center in units of 'scale'.
+# Can be used to move a desired point to (0, 0) to create a
# suitable spawn point, or to allow 'zooming in' on a desired
# point by increasing 'scale'.
-# The default is tuned for a suitable spawn point for mandelbrot
+# The default is tuned for a suitable spawn point for Mandelbrot
# sets with default parameters, it may need altering in other
# situations.
# Range roughly -2 to 2. Multiply by 'scale' for offset in nodes.
mgfractal_offset (Offset) v3f (1.79, 0.0, 0.0)
-# W co-ordinate of the generated 3D slice of a 4D fractal.
+# W coordinate of the generated 3D slice of a 4D fractal.
# Determines which 3D slice of the 4D shape is generated.
# Alters the shape of the fractal.
# Has no effect on 3D fractals.
# Variation of biome filler depth.
mgfractal_np_filler_depth (Filler depth noise) noise_params_2d 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0, eased
-# First of 2 3D noises that together define tunnels.
+# First of two 3D noises that together define tunnels.
mgfractal_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Second of 2 3D noises that together define tunnels.
+# Second of two 3D noises that together define tunnels.
mgfractal_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+# 3D noise that determines number of dungeons per mapchunk.
+mgfractal_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Mapgen Valleys]
# Map generation attributes specific to Mapgen Valleys.
-# 'altitude_chill' makes higher elevations colder, which may cause biome issues.
-# 'humid_rivers' modifies the humidity around rivers and in areas where water would tend to pool,
-# it may interfere with delicately adjusted biomes.
-# Flags that are not enabled are not modified from the default.
-# Flags starting with 'no' are used to explicitly disable them.
-mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
-
-# The altitude at which temperature drops by 20.
+# 'altitude_chill': Reduces heat with altitude.
+# 'humid_rivers': Increases humidity around rivers.
+# 'vary_river_depth': If enabled, low humidity and high heat causes rivers
+# to become shallower and occasionally dry.
+# 'altitude_dry': Reduces humidity with altitude.
+mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers,vary_river_depth,altitude_dry altitude_chill,humid_rivers,vary_river_depth,altitude_dry,noaltitude_chill,nohumid_rivers,novary_river_depth,noaltitude_dry
+
+# The vertical distance over which heat drops by 20 if 'altitude_chill' is
+# enabled. Also the vertical distance over which humidity drops by 10 if
+# 'altitude_dry' is enabled.
mgvalleys_altitude_chill (Altitude chill) int 90
-# Depth below which you'll find large caves.
+# Depth below which you'll find large caves.
mgvalleys_large_cave_depth (Large cave depth) int -33
-# Y of upper limit of lava in large caves.
-mgvalleys_lava_depth (Lava depth) int 1
+# Minimum limit of random number of small caves per mapchunk.
+mgvalleys_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgvalleys_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgvalleys_large_cave_num_min (Large cave minimum number) int 0 0 64
-# Depth below which you'll find giant caverns.
+# Maximum limit of random number of large caves per mapchunk.
+mgvalleys_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgvalleys_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
+
+# Depth below which you'll find giant caverns.
mgvalleys_cavern_limit (Cavern upper limit) int -256
-# Y-distance over which caverns expand to full size.
+# Y-distance over which caverns expand to full size.
mgvalleys_cavern_taper (Cavern taper) int 192
-# Defines full size of caverns, smaller values create larger caverns.
+# Defines full size of caverns, smaller values create larger caverns.
mgvalleys_cavern_threshold (Cavern threshold) float 0.6
-# How deep to make rivers.
+# How deep to make rivers.
mgvalleys_river_depth (River depth) int 4
-# How wide to make rivers.
+# How wide to make rivers.
mgvalleys_river_size (River size) int 5
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgvalleys_cave_width (Cave width) float 0.09
# Lower Y limit of dungeons.
[**Noises]
-# Caves and tunnels form at the intersection of the two noises.
+# First of two 3D noises that together define tunnels.
mgvalleys_np_cave1 (Cave noise #1) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
-# Caves and tunnels form at the intersection of the two noises.
+# Second of two 3D noises that together define tunnels.
mgvalleys_np_cave2 (Cave noise #2) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
-# The depth of dirt or other biome filler node.
+# The depth of dirt or other biome filler node.
mgvalleys_np_filler_depth (Filler depth) noise_params_2d 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0, eased
-# 3D noise defining giant caverns.
+# 3D noise defining giant caverns.
mgvalleys_np_cavern (Cavern noise) noise_params_3d 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
-# River noise. Rivers occur close to noise value zero.
+# Defines large-scale river channel structure.
mgvalleys_np_rivers (River noise) noise_params_2d 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0, eased
-# Base terrain height.
+# Base terrain height.
mgvalleys_np_terrain_height (Terrain height) noise_params_2d -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0, eased
-# Raises terrain to make valleys around the rivers.
+# Raises terrain to make valleys around the rivers.
mgvalleys_np_valley_depth (Valley depth) noise_params_2d 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0, eased
-# Slope and fill work together to modify the heights.
+# Slope and fill work together to modify the heights.
mgvalleys_np_inter_valley_fill (Valley fill) noise_params_3d 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
-# Amplifies the valleys.
+# Amplifies the valleys.
mgvalleys_np_valley_profile (Valley profile) noise_params_2d 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0, eased
-# Slope and fill work together to modify the heights.
+# Slope and fill work together to modify the heights.
mgvalleys_np_inter_valley_slope (Valley slope) noise_params_2d 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0, eased
+# 3D noise that determines number of dungeons per mapchunk.
+mgvalleys_np_dungeons (Dungeon noise) noise_params_3d 0.9, 0.5, (500, 500, 500), 0, 2, 0.8, 2.0
+
[*Advanced]
-# Size of chunks to be generated at once by mapgen, stated in mapblocks (16 nodes).
-# Increasing this by 1 almost doubles the 3D noise calculation load.
-# High values can cause noise calculation to overload.
-# Values smaller than 5 cause a terrain bug in mgv6.
-# Since there is a fixed number of large caves and dungeons per
-# mapchunk, values other than 5 alter the density of these.
+# Size of mapchunks generated by mapgen, stated in mapblocks (16 nodes).
+# WARNING!: There is no benefit, and there are several dangers, in
+# increasing this value above 5.
+# Reducing this value increases cave and dungeon density.
+# Altering this value is for special usage, leaving it unchanged is
+# recommended.
chunksize (Chunk size) int 5
-# Dump the mapgen debug infos.
+# Dump the mapgen debug information.
enable_mapgen_debug_info (Mapgen debug) bool false
# Maximum number of blocks that can be queued for loading.
-emergequeue_limit_total (Absolute limit of emerge queues) int 256
+emergequeue_limit_total (Absolute limit of queued blocks to emerge) int 512
# Maximum number of blocks to be queued that are to be loaded from file.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_diskonly (Limit of emerge queues on disk) int 32
+# This limit is enforced per player.
+emergequeue_limit_diskonly (Per-player limit of queued blocks load from disk) int 64
# Maximum number of blocks to be queued that are to be generated.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_generate (Limit of emerge queues to generate) int 32
-
-# Number of emerge threads to use. Make this field blank, or increase this number
-# to use multiple threads. On multiprocessor systems, this will improve mapgen speed greatly
-# at the cost of slightly buggy caves.
+# This limit is enforced per player.
+emergequeue_limit_generate (Per-player limit of queued blocks to generate) int 64
+
+# Number of emerge threads to use.
+# Value 0:
+# - Automatic selection. The number of emerge threads will be
+# - 'number of processors - 2', with a lower limit of 1.
+# Any other value:
+# - Specifies the number of emerge threads, with a lower limit of 1.
+# WARNING: Increasing the number of emerge threads increases engine mapgen
+# speed, but this may harm game performance by interfering with other
+# processes, especially in singleplayer and/or when running Lua code in
+# 'on_generated'. For many users the optimum setting may be '1'.
num_emerge_threads (Number of emerge threads) int 1
+
+[Online Content Repository]
+
+# The URL for the content repository
+contentdb_url (ContentDB URL) string https://content.minetest.net
+
+# Comma-separated list of flags to hide in the content repository.
+# "nonfree" can be used to hide packages which do not qualify as 'free software',
+# as defined by the Free Software Foundation.
+# You can also specify content ratings.
+# These flags are independent from Minetest versions,
+# so see a full list at https://content.minetest.net/help/content_flags/
+contentdb_flag_blacklist (ContentDB Flag Blacklist) string nonfree, desktop_default
+
+# Maximum number of concurrent downloads. Downloads exceeding this limit will be queued.
+contentdb_max_concurrent_downloads (ContentDB Max Concurrent Downloads) int 3
projects / dragonfireclient.git / blobdiff