# This requires the "noclip" privilege on the server.
noclip (Noclip) bool false
-# Smooths camera when moving and looking around.
+# Smooths camera when looking around. Also called look or mouse smoothing.
# Useful for recording videos.
cinematic (Cinematic mode) bool false
# Continuous forward movement (only used for testing).
continuous_forward (Continuous forward) bool false
+# Enable Joysticks
+enable_joysticks (Enable Joysticks) bool false
+
+# The time in seconds it takes between repeated events
+# when holding down a joystick button combination.
+repeat_joystick_button_time (Joystick button repetition invterval) float 0.17
+
+# The sensitivity of the joystick axes for moving the
+# ingame view frustum around.
+joystick_frustum_sensitivity (Joystick frustum sensitivity) float 170
+
# Key for moving the player forward.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_forward (Forward key) key KEY_KEY_W
# Key for toggling cinematic mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_cinematic (Cinematic mode key) key KEY_F8
+keymap_cinematic (Cinematic mode key) key
# Key for toggling display of minimap.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_camera_mode (Toggle camera mode key) key KEY_F7
-# Key for increasing the viewing range. Modifies the minimum viewing range.
+# Key for increasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_increase_viewing_range_min (View range increase key) key +
-# Key for decreasing the viewing range. Modifies the minimum viewing range.
+# Key for decreasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_decrease_viewing_range_min (View range decrease key) key -
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Whether to support older servers before protocol version 25.
+# Enable if you want to connect to 0.4.12 servers and before.
+# Servers starting with 0.4.13 will work, 0.4.12-dev servers may work.
+# Disabling this option will protect your password better.
+send_pre_v25_init (Support older servers) bool true
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
+# Show entity selection boxes
+show_entity_selectionbox (Show entity selection boxes) bool true
+
# Enable usage of remote media server (if provided by server).
# Remote servers offer a significantly faster way to download media (e.g. textures)
# when connecting to the server.
[***Basic]
+# Enable VBO
+enable_vbo (VBO) bool true
+
# Whether to fog out the end of the visible area.
enable_fog (Fog) bool true
-# Enable a bit lower water surface, so it doesn't "fill" the node completely.
-# Note that this is not quite optimized and that smooth lighting on the
-# water surface doesn't work with this.
-new_style_water (New style water) bool false
-
# Leaves style:
# - Fancy: all faces visible
# - Simple: only outer faces, if defined special_tiles are used
# Use 3D cloud look instead of flat.
enable_3d_clouds (3D clouds) bool true
+# Method used to highlight selected object.
+node_highlighting (Node highlighting) enum box box,halo
+
[***Filtering]
# Use mip mapping to scale textures. May slightly increase performance.
# enabled.
texture_min_size (Minimum texture size for filters) int 64
-# Pre-generate all item visuals used in the inventory.
-# This increases startup time, but runs smoother in-game.
-# The generated textures can easily exceed your VRAM, causing artifacts in the inventory.
-preload_item_visuals (Preload inventory textures) bool false
-
# Experimental option, might cause visible spaces between blocks
# when set to higher number than 0.
fsaa (FSAA) enum 0 0,1,2,4,8,16
# Thy only work with the OpenGL video backend.
enable_shaders (Shaders) bool true
+[****Tone Mapping]
+
+# Enables filmic tone mapping
+tone_mapping (Filmic tone mapping) bool false
+
[****Bumpmapping]
# Enables bumpmapping for textures. Normalmaps need to be supplied by the texture pack
[***Advanced]
-# Minimum wanted FPS.
-# The amount of rendered stuff is dynamically set according to this. and viewing range min and max.
-wanted_fps (Wanted FPS) int 30
-
# If FPS would go higher than this, limit it by sleeping
# to not waste CPU power for no benefit.
fps_max (Maximum FPS) int 60
# Maximum FPS when game is paused.
pause_fps_max (FPS in pause menu) int 20
-# The allowed adjustment range for the automatic rendering range adjustment.
-# Set this to be equal to viewing range minimum to disable the auto-adjustment algorithm.
-viewing_range_nodes_max (Viewing range maximum) int 160
-
-# The allowed adjustment range for the automatic rendering range adjustment.
-# Set this to be equal to viewing range maximum to disable the auto-adjustment algorithm.
-viewing_range_nodes_min (Viewing range minimum) int 35
+# View distance in nodes.
+# Min = 20
+viewing_range (Viewing range) int 100
# Width component of the initial window size.
screenW (Screen width) int 800
# Field of view in degrees.
fov (Field of view) int 72 30 160
+# Field of view while zooming in degrees.
+# This requires the "zoom" privilege on the server.
+zoom_fov (Field of view for zoom) int 15 15 160
+
# Adjust the gamma encoding for the light tables. Lower numbers are brighter.
# This setting is for the client only and is ignored by the server.
display_gamma (Gamma) float 1.8 1.0 3.0
# Useful if there's something to be displayed right or left of hotbar.
hud_hotbar_max_width (Maximum hotbar width) float 1.0
-# Enable selection highlighting for nodes (disables selectionbox).
-enable_node_highlighting (Node highlighting) bool false
-
# Enables caching of facedir rotated meshes.
enable_mesh_cache (Mesh cache) bool false
# set to the nearest valid value.
ambient_occlusion_gamma (Ambient occlusion gamma) float 2.2 0.25 4.0
+# Enables animation of inventory items.
+inventory_items_animations (Inventory items animations) bool false
+
[**Menus]
# Use a cloud animation for the main menu background.
# Path to save screenshots at.
screenshot_path (Screenshot folder) path
+# Format of screenshots.
+screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
+
+# Screenshot quality. Only used for JPEG format.
+# 1 means worst quality; 100 means best quality.
+# Use 0 for default quality.
+screenshot_quality (Screenshot quality) int 0 0 100
+
[**Advanced]
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
# If you want to announce your ipv6 address, use serverlist_url = v6.servers.minetest.net.
serverlist_url (Serverlist URL) string servers.minetest.net
+# Disable escape sequences, e.g. chat coloring.
+# Use this if you want to run a server with pre-0.4.14 clients and you want to disable
+# the escape sequences generated by mods.
+disable_escape_sequences (Disable escape sequences) bool false
+
[*Network]
# Network port to listen (UDP).
# See /privs in game for a full list on your server and mod configuration.
default_privs (Default privileges) string interact, shout
+# Privileges that players with basic_privs can grant
+basic_privs (Basic Privileges) string interact, shout
+
# Whether players are shown to clients without any range limit.
# Deprecated, use the setting player_transfer_distance instead.
unlimited_player_transfer_distance (Unlimited player transfer distance) bool true
# If this is set, players will always (re)spawn at the given position.
static_spawnpoint (Static spawnpoint) string
-# Maximum distance above water level for player spawn.
-# Larger values result in spawn points closer to (x = 0, z = 0).
-# Smaller values may result in a suitable spawn point not being found,
-# resulting in a spawn at (0, 0, 0) possibly buried underground.
-vertical_spawn_range (Vertical spawn range) int 16
-
# If enabled, new players cannot join with an empty password.
disallow_empty_password (Disallow empty passwords) bool false
# - error: abort on usage of deprecated call (suggested for mod developers).
deprecated_lua_api_handling (Deprecated Lua API handling) enum legacy legacy,log,error
-# Useful for mod developers.
-mod_profiling (Mod profiling) bool false
-
-# Detailed mod profile data. Useful for mod developers.
-detailed_profiling (Detailed mod profiling) bool false
-
-# Profiler data print interval. 0 = disable. Useful for developers.
-profiler_print_interval (Profiling print interval) int 0
-
# Number of extra blocks that can be loaded by /clearobjects at once.
# This is a trade-off between sqlite transaction overhead and
# memory consumption (4096=100MB, as a rule of thumb).
# Length of a server tick and the interval at which objects are generally updated over network.
dedicated_server_step (Dedicated server step) float 0.1
+# Time in between active block management cycles
+active_block_mgmt_interval (Active Block Management interval) float 2.0
+
+# Length of time between ABM execution cycles
+abm_interval (Active Block Modifier interval) float 1.0
+
+# Length of time between NodeTimer execution cycles
+nodetimer_interval (NodeTimer interval) float 1.0
+
# If enabled, invalid world data won't cause the server to shut down.
# Only enable this if you know what you are doing.
ignore_world_load_errors (Ignore world errors) bool false
# Name of map generator to be used when creating a new world.
# Creating a world in the main menu will override this.
-mg_name (Mapgen name) enum v6 v5,v6,v7,flat,fractal,singlenode
+mg_name (Mapgen name) enum v6 v5,v6,v7,flat,valleys,fractal,singlenode
# Water surface level of the world.
water_level (Water level) int 1
# In Mapgen v6 the 'decorations' flag controls all decorations except trees
# and junglegrass, in all other mapgens this flag controls all decorations.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations caves,dungeons,light,decorations,nocaves,nodungeons,nolight,nodecorations
[**Advanced]
[***Mapgen v5]
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgv5_cave_width (Mapgen v5 cave width) float 0.125
+
mgv5_np_filler_depth (Mapgen v5 filler depth noise parameters) noise_params 0, 1, (150, 150, 150), 261, 4, 0.7, 2.0
mgv5_np_factor (Mapgen v5 factor noise parameters) noise_params 0, 1, (250, 250, 250), 920381, 3, 0.45, 2.0
mgv5_np_height (Mapgen v5 height noise parameters) noise_params 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0
[***Mapgen v6]
# Map generation attributes specific to Mapgen v6.
-# When snowbiomes are enabled jungles are enabled and the jungles flag is ignored.
+# When snowbiomes are enabled jungles are automatically enabled, the 'jungles' flag is ignored.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgv6_spflags (Mapgen v6 flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
# Controls size of deserts and beaches in Mapgen v6.
[***Mapgen v7]
# Map generation attributes specific to Mapgen v7.
-# 'ridges' are the rivers.
+# The 'ridges' flag controls the rivers.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgv7_spflags (Mapgen v7 flags) flags mountains,ridges mountains,ridges,nomountains,noridges
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgv7_cave_width (Mapgen v7 cave width) float 0.2
+
mgv7_np_terrain_base (Mapgen v7 terrain base noise parameters) noise_params 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0
mgv7_np_terrain_alt (Mapgen v7 terrain altitude noise parameters) noise_params 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0
mgv7_np_terrain_persist (Mapgen v7 terrain persistation noise parameters) noise_params 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0
-mgv7_np_height_select (Mapgen v7 height select noise parameters) noise_params -12, 24, (500, 500, 500), 4213, 6, 0.7, 2.0
+mgv7_np_height_select (Mapgen v7 height select noise parameters) noise_params -8, 16, (500, 500, 500), 4213, 6, 0.7, 2.0
mgv7_np_filler_depth (Mapgen v7 filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
mgv7_np_mount_height (Mapgen v7 mount height noise parameters) noise_params 256, 112, (1000, 1000, 1000), 72449, 3, 0.6, 2.0
mgv7_np_ridge_uwater (Mapgen v7 ridge water noise parameters) noise_params 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0
mgv7_np_mountain (Mapgen v7 mountain noise parameters) noise_params -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
mgv7_np_ridge (Mapgen v7 ridge noise parameters) noise_params 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
-mgv7_np_cave1 (Mapgen v7 cave1 noise parameters) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
-mgv7_np_cave2 (Mapgen v7 cave2 noise parameters) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
+mgv7_np_cave1 (Mapgen v7 cave1 noise parameters) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgv7_np_cave2 (Mapgen v7 cave2 noise parameters) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
[***Mapgen flat]
# Map generation attributes specific to Mapgen flat.
-# Occasional lakes and hills added to the flat world.
+# Occasional lakes and hills can be added to the flat world.
# Flags that are not specified in the flag string are not modified from the default.
-# Flags starting with "no" are used to explicitly disable them.
+# Flags starting with 'no' are used to explicitly disable them.
mgflat_spflags (Mapgen flat flags) flags lakes,hills,,nolakes,nohills
# Y of flat ground.
# Y of upper limit of large pseudorandom caves.
mgflat_large_cave_depth (Mapgen flat large cave depth) int -33
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgflat_cave_width (Mapgen flat cave width) float 0.2
+
# Terrain noise threshold for lakes.
# Controls proportion of world area covered by lakes.
# Adjust towards 0.0 for a larger proportion.
mgflat_np_terrain (Mapgen flat terrain noise parameters) noise_params 0, 1, (600, 600, 600), 7244, 5, 0.6, 2.0
mgflat_np_filler_depth (Mapgen flat filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
-mgflat_np_cave1 (Mapgen flat cave1 noise parameters) noise_params 0, 12, (128, 128, 128), 52534, 4, 0.5, 2.0
-mgflat_np_cave2 (Mapgen flat cave2 noise parameters) noise_params 0, 12, (128, 128, 128), 10325, 4, 0.5, 2.0
+mgflat_np_cave1 (Mapgen flat cave1 noise parameters) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgflat_np_cave2 (Mapgen flat cave2 noise parameters) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
[***Mapgen fractal]
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgfractal_cave_width (Mapgen fractal cave width) float 0.2
+
# Choice of 18 fractals from 9 formulas.
# 1 = 4D "Roundy" mandelbrot set.
# 2 = 4D "Roundy" julia set.
mgfractal_np_seabed (Mapgen fractal seabed noise parameters) noise_params -14, 9, (600, 600, 600), 41900, 5, 0.6, 2.0
mgfractal_np_filler_depth (Mapgen fractal filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
-mgfractal_np_cave1 (Mapgen fractal cave1 noise parameters) noise_params 0, 12, (128, 128, 128), 52534, 4, 0.5, 2.0
-mgfractal_np_cave2 (Mapgen fractal cave2 noise parameters) noise_params 0, 12, (128, 128, 128), 10325, 4, 0.5, 2.0
+mgfractal_np_cave1 (Mapgen fractal cave1 noise parameters) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgfractal_np_cave2 (Mapgen fractal cave2 noise parameters) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+
+# Mapgen Valleys parameters
+[***Mapgen Valleys]
+
+# General parameters
+[****General]
+
+# Map generation attributes specific to Mapgen Valleys.
+# 'altitude_chill' makes higher elevations colder, which may cause biome issues.
+# 'humid_rivers' modifies the humidity around rivers and in areas where water would tend to pool,
+# it may interfere with delicately adjusted biomes.
+# Flags that are not specified in the flag string are not modified from the default.
+# Flags starting with 'no' are used to explicitly disable them.
+mg_valleys_spflags (Valleys C Flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
+
+# The altitude at which temperature drops by 20C
+mgvalleys_altitude_chill (Altitude Chill) int 90
+
+# Depth below which you'll find large caves.
+mgvalleys_large_cave_depth (Large cave depth) int -33
+
+# Creates unpredictable lava features in caves.
+# These can make mining difficult. Zero disables them. (0-10)
+mgvalleys_lava_features (Lava Features) int 0
+
+# Depth below which you'll find massive caves.
+mgvalleys_massive_cave_depth (Massive cave depth) int -256
+
+# How deep to make rivers
+mgvalleys_river_depth (River Depth) int 4
+
+# How wide to make rivers
+mgvalleys_river_size (River Size) int 5
+
+# Creates unpredictable water features in caves.
+# These can make mining difficult. Zero disables them. (0-10)
+mgvalleys_water_features (Water Features) int 0
+
+# Controls width of tunnels, a smaller value creates wider tunnels.
+mgvalleys_cave_width (Cave width) float 0.2
+
+# Noise parameters
+[****Noises]
+
+# Caves and tunnels form at the intersection of the two noises
+mgvalleys_np_cave1 (Cave noise #1) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+
+# Caves and tunnels form at the intersection of the two noises
+mgvalleys_np_cave2 (Cave noise #2) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+
+# The depth of dirt or other filler
+mgvalleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
+
+# Massive caves form here.
+mgvalleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
+
+# River noise -- rivers occur close to zero
+mgvalleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
+
+# Base terrain height
+mgvalleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
+
+# Raises terrain to make valleys around the rivers
+mgvalleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
+
+# Slope and fill work together to modify the heights
+mgvalleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
+
+# Amplifies the valleys
+mgvalleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
+
+# Slope and fill work together to modify the heights
+mgvalleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
[*Security]
# functions even when mod security is on (via request_insecure_environment()).
secure.trusted_mods (Trusted mods) string
+# Comma-seperated list of mods that are allowed to access HTTP APIs, which
+# allow them to upload and download data to/from the internet.
+secure.http_mods (HTTP Mods) string
+
+[*Advanced]
+
+[**Profiling]
+# Load the game profiler to collect game profiling data.
+# Provides a /profiler command to access the compiled profile.
+# Useful for mod developers and server operators.
+profiler.load (Load the game profiler) bool false
+
+# The default format in which profiles are being saved,
+# when calling `/profiler save [format]` without format.
+profiler.default_report_format (Default report format) enum txt txt,csv,lua,json,json_pretty
+
+# The file path relative to your worldpath in which profiles will be saved to.
+#
+profiler.report_path (Report path) string ""
+
+[***Instrumentation]
+
+# Instrument the methods of entities on registration.
+instrument.entity (Entity methods) bool true
+
+# Instrument the action function of Active Block Modifiers on registration.
+instrument.abm (Active Block Modifiers) bool true
+
+# Instrument the action function of Loading Block Modifiers on registration.
+instrument.lbm (Loading Block Modifiers) bool true
+
+# Instrument chatcommands on registration.
+instrument.chatcommand (Chatcommands) bool true
+
+# Instrument global callback functions on registration.
+# (anything you pass to a minetest.register_*() function)
+instrument.global_callback (Global callbacks) bool true
+
+[****Advanced]
+# Instrument builtin.
+# This is usually only needed by core/builtin contributors
+instrument.builtin (Builtin) bool false
+
+# Have the profiler instrument itself:
+# * Instrument an empty function.
+# This estimates the overhead, that instrumentation is adding (+1 function call).
+# * Instrument the sampler being used to update the statistics.
+instrument.profiler (Profiler) bool false
+
[Client and Server]
# Name of the player.
modstore_listmods_url (Modstore mods list URL) string https://forum.minetest.net/mmdb/mods/
modstore_details_url (Modstore details URL) string https://forum.minetest.net/mmdb/mod/*/
+
+# Print the engine's profiling data in regular intervals (in seconds). 0 = disable. Useful for developers.
+profiler_print_interval (Engine profiling data print interval) int 0