# Flags are always separated by comma without spaces.
# - default possible_flags
# * noise_params_2d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * noise_params_3d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * v3f:
# Format is (<X>, <Y>, <Z>)
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_inventory (Inventory key) key KEY_KEY_I
+# Key for opening the special inventory.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_special_inventory (Special inventory key) key KEY_KEY_O
+
# Key for moving fast in fast mode.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_special1 (Special key) key KEY_KEY_E
# Key for toggling display of minimap.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_minimap (Minimap key) key KEY_F9
+keymap_minimap (Minimap key) key KEY_KEY_V
# Key for taking screenshots.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_zoom (View zoom key) key KEY_KEY_Z
+# Key for toggling Killaura.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_toggle_killaura (Killaura key) key KEY_KEY_X
+
+# Key for toggling Freecam.
+# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
+keymap_toggle_freecam (Freecam key) key KEY_KEY_G
+
# Key for selecting the first hotbar slot.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_slot1 (Hotbar slot 1 key) key KEY_KEY_1
# Key for switching between first- and third-person camera.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_camera_mode (Toggle camera mode key) key KEY_F7
+keymap_camera_mode (Toggle camera mode key) key KEY_KEY_C
# Key for increasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# 1 = relief mapping (slower, more accurate).
parallax_occlusion_mode (Parallax occlusion mode) int 1 0 1
-# Strength of parallax.
-3d_paralax_strength (Parallax occlusion strength) float 0.025
-
# Number of parallax occlusion iterations.
parallax_occlusion_iterations (Parallax occlusion iterations) int 4
enable_waving_water (Waving liquids) bool false
# The maximum height of the surface of waving liquids.
-# 1.0 = Wave reaches the top of blocks.
+# 4.0 = Wave height is two nodes.
# 0.0 = Wave doesn't move at all.
+# Default is 1.0 (1/2 node).
# Requires waving liquids to be enabled.
-water_wave_height (Waving liquids wave height) float 1.0 0.0 1.0
+water_wave_height (Waving liquids wave height) float 1.0 0.0 4.0
# Length of liquid waves.
# Requires waving liquids to be enabled.
# View distance in nodes.
viewing_range (Viewing range) int 100 20 4000
-# Camera 'near clipping plane' distance in nodes, between 0 and 0.5.
-# Most users will not need to change this.
+# Camera 'near clipping plane' distance in nodes, between 0 and 0.25
+# Only works on GLES platforms. Most users will not need to change this.
# Increasing can reduce artifacting on weaker GPUs.
# 0.1 = Default, 0.25 = Good value for weaker tablets.
-near_plane (Near clipping plane) float 0.1 0 0.5
+near_plane (Near plane) float 0.1 0 0.25
# Width component of the initial window size.
screen_w (Screen width) int 1024 1
# Note that the interlaced mode requires shaders to be enabled.
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,crossview,pageflip
+# Strength of 3D mode parallax.
+3d_paralax_strength (3D mode parallax strength) float 0.025
+
# In-game chat console height, between 0.1 (10%) and 1.0 (100%).
console_height (Console height) float 0.6 0.1 1.0
selectionbox_width (Selection box width) int 2 1 5
# Crosshair color (R,G,B).
+# Also controls the object crosshair color
crosshair_color (Crosshair color) string (255,255,255)
# Crosshair alpha (opaqueness, between 0 and 255).
+# Also controls the object crosshair color
crosshair_alpha (Crosshair alpha) int 255 0 255
# Maximum number of recent chat messages to show
autoscale_mode (Autoscaling mode) enum disable disable,enable,force
# Show entity selection boxes
-show_entity_selectionbox (Show entity selection boxes) bool true
+# A restart is required after changing this.
+show_entity_selectionbox (Show entity selection boxes) bool false
[*Menus]
# This font will be used for certain languages or if the default font is unavailable.
fallback_font_path (Fallback font path) filepath fonts/DroidSansFallbackFull.ttf
-# Path to save screenshots at.
-screenshot_path (Screenshot folder) path
+# Font size of the recent chat text and chat prompt in point (pt).
+# Value 0 will use the default font size.
+chat_font_size (Chat font size) int 0
+
+# Path to save screenshots at. Can be an absolute or relative path.
+# The folder will be created if it doesn't already exist.
+screenshot_path (Screenshot folder) path screenshots
# Format of screenshots.
screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Prometheus listener address.
+# If minetest is compiled with ENABLE_PROMETHEUS option enabled,
+# enable metrics listener for Prometheus on that address.
+# Metrics can be fetch on http://127.0.0.1:30000/metrics
+prometheus_listener_address (Prometheus listener address) string 127.0.0.1:30000
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
# Setting it to -1 disables the feature.
item_entity_ttl (Item entity TTL) int 900
+# Specifies the default stack size of nodes, items and tools.
+# Note that mods or games may explicitly set a stack for certain (or all) items.
+default_stack_max (Default stack size) int 99
+
# Enable players getting damage and dying.
enable_damage (Damage) bool false
# active block stuff, stated in mapblocks (16 nodes).
# In active blocks objects are loaded and ABMs run.
# This is also the minimum range in which active objects (mobs) are maintained.
-# This should be configured together with active_object_range.
+# This should be configured together with active_object_send_range_blocks.
active_block_range (Active block range) int 3
# From how far blocks are sent to clients, stated in mapblocks (16 nodes).
# Set the language. Leave empty to use the system language.
# A restart is required after changing this.
-language (Language) enum ,be,ca,cs,da,de,dv,en,eo,es,et,fr,he,hu,id,it,ja,jbo,ko,ky,lt,ms,nb,nl,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,tr,uk,zh_CN,zh_TW
-
+language (Language) enum ,ar,ca,cs,da,de,dv,el,en,eo,es,et,eu,fil,fr,hu,id,it,ja,ja_KS,jbo,kk,kn,lo,lt,ms,my,nb,nl,nn,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,th,tr,uk,vi
# Level of logging to be written to debug.txt:
# - <nothing> (no logging)
# debug.txt is only moved if this setting is positive.
debug_log_size_max (Debug log file size threshold) int 50
+# Minimal level of logging to be written to chat.
+chat_log_level (Chat log level) enum error ,none,error,warning,action,info,verbose
+
# Enable IPv6 support (for both client and server).
# Required for IPv6 connections to work at all.
enable_ipv6 (IPv6) bool true
# Y of upper limit of large caves.
mgv5_large_cave_depth (Large cave depth) int -256
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgv5_lava_depth (Lava depth) int -256
-
# Minimum limit of random number of small caves per mapchunk.
mgv5_small_cave_num_min (Small cave minimum number) int 0 0 256
[*Mapgen V7]
# Map generation attributes specific to Mapgen v7.
-# 'ridges' enables the rivers.
+# 'ridges': Rivers.
+# 'floatlands': Floating land masses in the atmosphere.
+# 'caverns': Giant caves deep underground.
mgv7_spflags (Mapgen V7 specific flags) flags mountains,ridges,nofloatlands,caverns mountains,ridges,floatlands,caverns,nomountains,noridges,nofloatlands,nocaverns
# Y of mountain density gradient zero level. Used to shift mountains vertically.
mgv7_mount_zero_level (Mountain zero level) int 0
+# Lower Y limit of floatlands.
+mgv7_floatland_ymin (Floatland minimum Y) int 1024
+
+# Upper Y limit of floatlands.
+mgv7_floatland_ymax (Floatland maximum Y) int 4096
+
+# Y-distance over which floatlands taper from full density to nothing.
+# Tapering starts at this distance from the Y limit.
+# For a solid floatland layer, this controls the height of hills/mountains.
+# Must be less than or equal to half the distance between the Y limits.
+mgv7_floatland_taper (Floatland tapering distance) int 256
+
+# Exponent of the floatland tapering. Alters the tapering behaviour.
+# Value = 1.0 creates a uniform, linear tapering.
+# Values > 1.0 create a smooth tapering suitable for the default separated
+# floatlands.
+# Values < 1.0 (for example 0.25) create a more defined surface level with
+# flatter lowlands, suitable for a solid floatland layer.
+mgv7_float_taper_exp (Floatland taper exponent) float 2.0
+
+# Adjusts the density of the floatland layer.
+# Increase value to increase density. Can be positive or negative.
+# Value = 0.0: 50% of volume is floatland.
+# Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test
+# to be sure) creates a solid floatland layer.
+mgv7_floatland_density (Floatland density) float -0.6
+
+# Surface level of optional water placed on a solid floatland layer.
+# Water is disabled by default and will only be placed if this value is set
+# to above 'mgv7_floatland_ymax' - 'mgv7_floatland_taper' (the start of the
+# upper tapering).
+# ***WARNING, POTENTIAL DANGER TO WORLDS AND SERVER PERFORMANCE***:
+# When enabling water placement the floatlands must be configured and tested
+# to be a solid layer by setting 'mgv7_floatland_density' to 2.0 (or other
+# required value depending on 'mgv7_np_floatland'), to avoid
+# server-intensive extreme water flow and to avoid vast flooding of the
+# world surface below.
+mgv7_floatland_ywater (Floatland water level) int -31000
+
# Controls width of tunnels, a smaller value creates wider tunnels.
# Value >= 10.0 completely disables generation of tunnels and avoids the
# intensive noise calculations.
# Y of upper limit of large caves.
mgv7_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgv7_lava_depth (Lava depth) int -256
-
# Minimum limit of random number of small caves per mapchunk.
mgv7_small_cave_num_min (Small cave minimum number) int 0 0 256
# Proportion of large caves that contain liquid.
mgv7_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
-# Controls the density of mountain-type floatlands.
-# Is a noise offset added to the 'mgv7_np_mountain' noise value.
-mgv7_float_mount_density (Floatland mountain density) float 0.6
-
-# Typical maximum height, above and below midpoint, of floatland mountains.
-mgv7_float_mount_height (Floatland mountain height) float 128.0
-
-# Alters how mountain-type floatlands taper above and below midpoint.
-mgv7_float_mount_exponent (Floatland mountain exponent) float 0.75
-
-# Y-level of floatland midpoint and lake surface.
-mgv7_floatland_level (Floatland level) int 1280
-
-# Y-level to which floatland shadows extend.
-mgv7_shadow_limit (Shadow limit) int 1024
-
# Y-level of cavern upper limit.
mgv7_cavern_limit (Cavern limit) int -256
# Defines large-scale river channel structure.
mgv7_np_ridge_uwater (Ridge underwater noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
-# Defines areas of floatland smooth terrain.
-# Smooth floatlands occur when noise > 0.
-mgv7_np_floatland_base (Floatland base noise) noise_params_2d -0.6, 1.5, (600, 600, 600), 114, 5, 0.6, 2.0, eased
-
-# Variation of hill height and lake depth on floatland smooth terrain.
-mgv7_np_float_base_height (Floatland base height noise) noise_params_2d 48, 24, (300, 300, 300), 907, 4, 0.7, 2.0, eased
-
# 3D noise defining mountain structure and height.
# Also defines structure of floatland mountain terrain.
mgv7_np_mountain (Mountain noise) noise_params_3d -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
# 3D noise defining structure of river canyon walls.
mgv7_np_ridge (Ridge noise) noise_params_3d 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
+# 3D noise defining structure of floatlands.
+# If altered from the default, the noise 'scale' (0.7 by default) may need
+# to be adjusted, as floatland tapering functions best when this noise has
+# a value range of approximately -2.0 to 2.0.
+mgv7_np_floatland (Floatland noise) noise_params_3d 0, 0.7, (384, 96, 384), 1009, 4, 0.75, 1.618
+
# 3D noise defining giant caverns.
mgv7_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
# Y of upper limit of large caves.
mgcarpathian_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgcarpathian_lava_depth (Lava depth) int -256
-
# Minimum limit of random number of small caves per mapchunk.
mgcarpathian_small_cave_num_min (Small cave minimum number) int 0 0 256
# Y of upper limit of large caves.
mgflat_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgflat_lava_depth (Lava depth) int -256
-
# Minimum limit of random number of small caves per mapchunk.
mgflat_small_cave_num_min (Small cave minimum number) int 0 0 256
# Y of upper limit of large caves.
mgfractal_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgfractal_lava_depth (Lava depth) int -256
-
# Minimum limit of random number of small caves per mapchunk.
mgfractal_small_cave_num_min (Small cave minimum number) int 0 0 256
# Depth below which you'll find large caves.
mgvalleys_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgvalleys_lava_depth (Lava depth) int 1
-
# Minimum limit of random number of small caves per mapchunk.
mgvalleys_small_cave_num_min (Small cave minimum number) int 0 0 256
enable_mapgen_debug_info (Mapgen debug) bool false
# Maximum number of blocks that can be queued for loading.
-emergequeue_limit_total (Absolute limit of emerge queues) int 512
+emergequeue_limit_total (Absolute limit of queued blocks to emerge) int 512
# Maximum number of blocks to be queued that are to be loaded from file.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_diskonly (Limit of emerge queues on disk) int 64
+# This limit is enforced per player.
+emergequeue_limit_diskonly (Per-player limit of queued blocks load from disk) int 64
# Maximum number of blocks to be queued that are to be generated.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_generate (Limit of emerge queues to generate) int 64
+# This limit is enforced per player.
+emergequeue_limit_generate (Per-player limit of queued blocks to generate) int 64
# Number of emerge threads to use.
-# WARNING: Currently there are multiple bugs that may cause crashes when
-# 'num_emerge_threads' is larger than 1. Until this warning is removed it is
-# strongly recommended this value is set to the default '1'.
# Value 0:
# - Automatic selection. The number of emerge threads will be
# - 'number of processors - 2', with a lower limit of 1.
# These flags are independent from Minetest versions,
# so see a full list at https://content.minetest.net/help/content_flags/
contentdb_flag_blacklist (ContentDB Flag Blacklist) string nonfree, desktop_default
+
+[Cheat Menu]
+
+# Font to use for cheat menu
+cheat_menu_font (MenuFont) enum FM_Mono FM_Standard,FM_Mono,FM_Fallback,FM_Simple,FM_SimpleMono,FM_MaxMode,FM_Unspecified
+
+# (RGB value)
+cheat_menu_bg_color (Cell background color) v3f 255, 145, 88
+
+cheat_menu_bg_color_alpha (Cell background color alpha) int 192
+
+# (RGB value)
+cheat_menu_active_bg_color (Active cell background color) v3f 255, 87, 53
+
+cheat_menu_active_bg_color_alpha (Active cell background color alpha) int 192
+
+# (RGB value)
+cheat_menu_font_color (Font color) v3f 0, 0, 0
+
+cheat_menu_font_color_alpha (Font color alpha) int 255
+
+# (RGB value)
+cheat_menu_selected_font_color (Selected font color) v3f 255, 252, 88
+
+cheat_menu_selected_font_color_alpha (Selected font color alpha) int 255
+
+[Cheats]
+
+fullbright (Fullbright) bool false
+
+xray (XRay) bool false
+
+xray_nodes (XRay Nodes) string default:stone,mcl_core:stone
+
+priv_bypass (PrivBypass) bool true
+
+fastdig (FastDig) bool false
+
+fastplace (FastPlace) bool false
+
+autodig (AutoDig) bool false
+
+autoplace (AutoPlace) bool false
+
+prevent_natural_damage (NoFallDamage) bool true
+
+freecam (Freecam) bool false
+
+killaura (Killaura) bool false
+
+no_hurt_cam (NoHurtCam) bool false
+
+increase_tool_range (IncreasedRange) bool true
+
+increase_tool_range_plus (IncreasedRangePlus) bool true
+
+hud_flags_bypass (HUDBypass) bool true
+
+antiknockback (AntiKnockback) bool false
+
+entity_speed (GodMode) bool false
+
+jesus (Jesus) bool false
+
+instant_break (InstantBreak) bool false
+
+no_night (BrightNight) bool false
+
+coords (Coords) bool false
+
+point_liquids (PointLiquids) bool false
+
+log_particles (ParticleExploit) bool false
+
+spamclick (FastHit) bool false
+
+no_force_rotate (NoForceRotate) bool false
+
+enable_tracers (Tracers) bool false
+
+enable_esp (ESP) bool false
+
+no_slow (NoSlow) bool false
+
+ignore_status_messages (IgnoreStatus) bool true
+
+mark_deathmessages (Deathmessages) bool true
+
+autosneak (AutoSneak) bool false
+
+autoeject (AutoEject) bool false
+
+eject_items (AutoEject Items) string
+
+autotool (AutoTool) bool false
+
+autorespawn (AutoRespawn) bool false
+
+next_item (NextItem) bool false
+
+scaffold (Scaffold) bool false
+
+scaffold_plus (ScaffoldPlus) bool false
+
+block_water (BlockWater) bool false
+
+autotnt (PlaceOnTop) bool false
+
+replace (Replace) bool false
+
+crystal_pvp (CrystalPvP) bool false
+
+autototem (AutoTotem) bool false
+
+dont_point_nodes (ThroughWalls) bool false
+
+strip (Strip) bool false
+
+autorefill (AutoRefill) bool false
+
+nuke (Nuke) bool false
+
+chat_color (Chat Color) string rainbow
+
+use_chat_color (ColoredChat) bool false
+
+chat_reverse (ReversedChat) bool false
+
+forcefield (Forcefield) bool false
+
+friendlist (Killaura / Forcefield Friendlist) string
+
+cheat_hud (CheatHUD) bool true
+
+enable_node_esp (NodeESP) bool false
+
+enable_node_tracers (NodeTracers) bool false
+
+node_esp_nodes (NodeESP Nodes) string
+
+only_trace_players (OnlyTracePlayers) bool false
+
+autosprint (AutoSprint) bool false
+
+override_speed (SpeedOverride) bool false
+
+override_jump (JumpOverride) bool false
+
+override_gravity (GravityOverride) bool false
+
+override_speed_factor (SpeedOverride Factor) float 1.2
+
+override_jump_factor (JumpOverride Factor) float 2.0
+
+override_gravity_factor (GravityOverride) float 0.8
+
+jetpack (JetPack) bool false
+
+autohit (AutoHit) bool false
projects / dragonfireclient.git / blobdiff