# Flags are always separated by comma without spaces.
# - default possible_flags
# * noise_params_2d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * noise_params_3d:
-# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * v3f:
# Format is (<X>, <Y>, <Z>)
# Key for toggling display of minimap.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_minimap (Minimap key) key KEY_F9
+keymap_minimap (Minimap key) key KEY_KEY_V
# Key for taking screenshots.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# Key for switching between first- and third-person camera.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_camera_mode (Toggle camera mode key) key KEY_F7
+keymap_camera_mode (Toggle camera mode key) key KEY_KEY_C
# Key for increasing the viewing range.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
# 1 = relief mapping (slower, more accurate).
parallax_occlusion_mode (Parallax occlusion mode) int 1 0 1
-# Strength of parallax.
-3d_paralax_strength (Parallax occlusion strength) float 0.025
-
# Number of parallax occlusion iterations.
parallax_occlusion_iterations (Parallax occlusion iterations) int 4
# Note that the interlaced mode requires shaders to be enabled.
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,crossview,pageflip
+# Strength of 3D mode parallax.
+3d_paralax_strength (3D mode parallax strength) float 0.025
+
# In-game chat console height, between 0.1 (10%) and 1.0 (100%).
console_height (Console height) float 0.6 0.1 1.0
selectionbox_width (Selection box width) int 2 1 5
# Crosshair color (R,G,B).
+# Also controls the object crosshair color
crosshair_color (Crosshair color) string (255,255,255)
# Crosshair alpha (opaqueness, between 0 and 255).
+# Also controls the object crosshair color
crosshair_alpha (Crosshair alpha) int 255 0 255
# Maximum number of recent chat messages to show
autoscale_mode (Autoscaling mode) enum disable disable,enable,force
# Show entity selection boxes
-show_entity_selectionbox (Show entity selection boxes) bool true
+# A restart is required after changing this.
+show_entity_selectionbox (Show entity selection boxes) bool false
[*Menus]
# This font will be used for certain languages or if the default font is unavailable.
fallback_font_path (Fallback font path) filepath fonts/DroidSansFallbackFull.ttf
-# Path to save screenshots at.
-screenshot_path (Screenshot folder) path
+# Font size of the recent chat text and chat prompt in point (pt).
+# Value 0 will use the default font size.
+chat_font_size (Chat font size) int 0
+
+# Path to save screenshots at. Can be an absolute or relative path.
+# The folder will be created if it doesn't already exist.
+screenshot_path (Screenshot folder) path screenshots
# Format of screenshots.
screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Prometheus listener address.
+# If minetest is compiled with ENABLE_PROMETHEUS option enabled,
+# enable metrics listener for Prometheus on that address.
+# Metrics can be fetch on http://127.0.0.1:30000/metrics
+prometheus_listener_address (Prometheus listener address) string 127.0.0.1:30000
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
# Setting it to -1 disables the feature.
item_entity_ttl (Item entity TTL) int 900
+# Specifies the default stack size of nodes, items and tools.
+# Note that mods or games may explicitly set a stack for certain (or all) items.
+default_stack_max (Default stack size) int 99
+
# Enable players getting damage and dying.
enable_damage (Damage) bool false
# active block stuff, stated in mapblocks (16 nodes).
# In active blocks objects are loaded and ABMs run.
# This is also the minimum range in which active objects (mobs) are maintained.
-# This should be configured together with active_object_range.
+# This should be configured together with active_object_send_range_blocks.
active_block_range (Active block range) int 3
# From how far blocks are sent to clients, stated in mapblocks (16 nodes).
# Set the language. Leave empty to use the system language.
# A restart is required after changing this.
-language (Language) enum ,ar,ca,cs,da,de,dv,el,eo,es,et,eu,fil,fr,hu,id,it,ja,ja_KS,jbo,kk,kn,lo,lt,ms,my,nb,nl,nn,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,th,tr,uk,vi
+language (Language) enum ,ar,ca,cs,da,de,dv,el,en,eo,es,et,eu,fil,fr,hu,id,it,ja,ja_KS,jbo,kk,kn,lo,lt,ms,my,nb,nl,nn,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,th,tr,uk,vi
# Level of logging to be written to debug.txt:
# - <nothing> (no logging)
# debug.txt is only moved if this setting is positive.
debug_log_size_max (Debug log file size threshold) int 50
+# Minimal level of logging to be written to chat.
+chat_log_level (Chat log level) enum error ,none,error,warning,action,info,verbose
+
# Enable IPv6 support (for both client and server).
# Required for IPv6 connections to work at all.
enable_ipv6 (IPv6) bool true
[*Mapgen V7]
# Map generation attributes specific to Mapgen v7.
-# 'ridges' enables the rivers.
+# 'ridges': Rivers.
+# 'floatlands': Floating land masses in the atmosphere.
+# 'caverns': Giant caves deep underground.
mgv7_spflags (Mapgen V7 specific flags) flags mountains,ridges,nofloatlands,caverns mountains,ridges,floatlands,caverns,nomountains,noridges,nofloatlands,nocaverns
# Y of mountain density gradient zero level. Used to shift mountains vertically.
mgv7_mount_zero_level (Mountain zero level) int 0
+# Lower Y limit of floatlands.
+mgv7_floatland_ymin (Floatland minimum Y) int 1024
+
+# Upper Y limit of floatlands.
+mgv7_floatland_ymax (Floatland maximum Y) int 4096
+
+# Y-distance over which floatlands taper from full density to nothing.
+# Tapering starts at this distance from the Y limit.
+# For a solid floatland layer, this controls the height of hills/mountains.
+# Must be less than or equal to half the distance between the Y limits.
+mgv7_floatland_taper (Floatland tapering distance) int 256
+
+# Exponent of the floatland tapering. Alters the tapering behaviour.
+# Value = 1.0 creates a uniform, linear tapering.
+# Values > 1.0 create a smooth tapering suitable for the default separated
+# floatlands.
+# Values < 1.0 (for example 0.25) create a more defined surface level with
+# flatter lowlands, suitable for a solid floatland layer.
+mgv7_float_taper_exp (Floatland taper exponent) float 2.0
+
+# Adjusts the density of the floatland layer.
+# Increase value to increase density. Can be positive or negative.
+# Value = 0.0: 50% of volume is floatland.
+# Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test
+# to be sure) creates a solid floatland layer.
+mgv7_floatland_density (Floatland density) float -0.6
+
+# Surface level of optional water placed on a solid floatland layer.
+# Water is disabled by default and will only be placed if this value is set
+# to above 'mgv7_floatland_ymax' - 'mgv7_floatland_taper' (the start of the
+# upper tapering).
+# ***WARNING, POTENTIAL DANGER TO WORLDS AND SERVER PERFORMANCE***:
+# When enabling water placement the floatlands must be configured and tested
+# to be a solid layer by setting 'mgv7_floatland_density' to 2.0 (or other
+# required value depending on 'mgv7_np_floatland'), to avoid
+# server-intensive extreme water flow and to avoid vast flooding of the
+# world surface below.
+mgv7_floatland_ywater (Floatland water level) int -31000
+
# Controls width of tunnels, a smaller value creates wider tunnels.
# Value >= 10.0 completely disables generation of tunnels and avoids the
# intensive noise calculations.
# 3D noise defining structure of river canyon walls.
mgv7_np_ridge (Ridge noise) noise_params_3d 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
+# 3D noise defining structure of floatlands.
+# If altered from the default, the noise 'scale' (0.7 by default) may need
+# to be adjusted, as floatland tapering functions best when this noise has
+# a value range of approximately -2.0 to 2.0.
+mgv7_np_floatland (Floatland noise) noise_params_3d 0, 0.7, (384, 96, 384), 1009, 4, 0.75, 1.618
+
# 3D noise defining giant caverns.
mgv7_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
enable_mapgen_debug_info (Mapgen debug) bool false
# Maximum number of blocks that can be queued for loading.
-emergequeue_limit_total (Absolute limit of emerge queues) int 512
+emergequeue_limit_total (Absolute limit of queued blocks to emerge) int 512
# Maximum number of blocks to be queued that are to be loaded from file.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_diskonly (Limit of emerge queues on disk) int 64
+# This limit is enforced per player.
+emergequeue_limit_diskonly (Per-player limit of queued blocks load from disk) int 64
# Maximum number of blocks to be queued that are to be generated.
-# Set to blank for an appropriate amount to be chosen automatically.
-emergequeue_limit_generate (Limit of emerge queues to generate) int 64
+# This limit is enforced per player.
+emergequeue_limit_generate (Per-player limit of queued blocks to generate) int 64
# Number of emerge threads to use.
-# WARNING: Currently there are multiple bugs that may cause crashes when
-# 'num_emerge_threads' is larger than 1. Until this warning is removed it is
-# strongly recommended this value is set to the default '1'.
# Value 0:
# - Automatic selection. The number of emerge threads will be
# - 'number of processors - 2', with a lower limit of 1.
[Cheats]
-fullbright (Enable fullbright) bool false
+fullbright (Fullbright) bool false
+
+# Enable xray, requires fullbright
+xray (Xray) bool false
+
+# Texture to apply xray
+xray_node (XrayTexture) string default:stone
+
+# Make the Client think it has all privs
+priv_bypass (PrivBypass) bool true
+
+fastdig (FastDig) bool false
+
+prevent_natural_damage (NoFallDamage) bool true
+
+freecam (Freecam) bool false
+
+killaura (Killaura) bool false
+
+no_hurt_cam (NoHurtCam) bool false
-xray (Enable xray, requires fullbright) bool false
+increase_tool_range (Range) bool true
-xray_texture (Texture to make transparent when xray is enabled) string default_stone.png
+# HUD Flags Bypass
+hud_flags_bypass (HUDBypass) bool true
-priv_bypass (Make the Client think it has all privs) bool false
+antiknockback (AntiKnockback) bool false
-instant_dig (Dig Nodes on punch) bool false
+# Set to true if AntiCheat is enabled on server
+anticheat_protection (AnticheatProtection) bool true
-prevent_natural_damage (Prevent Natural Damage e.g Fall Damage) bool false
+autorespawn (AutoRespawn) bool false
-freecam (Move around freely) bool false
+show_cheat_hud (CheatHUD) bool true