# The time in seconds it takes between repeated right clicks when holding the right
# mouse button.
-repeat_rightclick_time (Rightclick repetition interval) float 0.25
+repeat_rightclick_time (Rightclick repetition interval) float 0.25 0.001
# Automatically jump up single-node obstacles.
autojump (Automatic jumping) bool false
# The time in seconds it takes between repeated events
# when holding down a joystick button combination.
-repeat_joystick_button_time (Joystick button repetition interval) float 0.17
+repeat_joystick_button_time (Joystick button repetition interval) float 0.17 0.001
# The sensitivity of the joystick axes for moving the
# ingame view frustum around.
[**Basic]
-# Enable VBO
+# Enable vertex buffer objects.
+# This should greatly improve graphics performance.
enable_vbo (VBO) bool true
# Whether to fog out the end of the visible area.
# when set to higher number than 0.
fsaa (FSAA) enum 0 0,1,2,4,8,16
-# Undersampling is similar to using lower screen resolution, but it applies
+# Undersampling is similar to using a lower screen resolution, but it applies
# to the game world only, keeping the GUI intact.
-# It should give significant performance boost at the cost of less detailed image.
-undersampling (Undersampling) enum 0 0,2,3,4
+# It should give a significant performance boost at the cost of less detailed image.
+# Higher values result in a less detailed image.
+undersampling (Undersampling) int 1 1 8
[**Shaders]
[***Tone Mapping]
-# Enables filmic tone mapping
+# Enables Hable's 'Uncharted 2' filmic tone mapping.
+# Simulates the tone curve of photographic film and how this approximates the
+# appearance of high dynamic range images. Mid-range contrast is slightly
+# enhanced, highlights and shadows are gradually compressed.
tone_mapping (Filmic tone mapping) bool false
[***Bumpmapping]
[***Waving Nodes]
-# Set to true enables waving water.
+# Set to true to enable waving liquids (like water).
# Requires shaders to be enabled.
-enable_waving_water (Waving water) bool false
+enable_waving_water (Waving liquids) bool false
-water_wave_height (Waving water height) float 1.0
+# The maximum height of the surface of waving liquids.
+# 4.0 = Wave height is two nodes.
+# 0.0 = Wave doesn't move at all.
+# Default is 1.0 (1/2 node).
+# Requires waving liquids to be enabled.
+water_wave_height (Waving liquids wave height) float 1.0 0.0 4.0
-water_wave_length (Waving water length) float 20.0
+# Length of liquid waves.
+# Requires waving liquids to be enabled.
+water_wave_length (Waving liquids wavelength) float 20.0 0.1
-water_wave_speed (Waving water speed) float 5.0
+# How fast liquid waves will move. Higher = faster.
+# If negative, liquid waves will move backwards.
+# Requires waving liquids to be enabled.
+water_wave_speed (Waving liquids wave speed) float 5.0
-# Set to true enables waving leaves.
+# Set to true to enable waving leaves.
# Requires shaders to be enabled.
enable_waving_leaves (Waving leaves) bool false
-# Set to true enables waving plants.
+# Set to true to enable waving plants.
# Requires shaders to be enabled.
enable_waving_plants (Waving plants) bool false
# If FPS would go higher than this, limit it by sleeping
# to not waste CPU power for no benefit.
-fps_max (Maximum FPS) int 60
+fps_max (Maximum FPS) int 60 1
# Maximum FPS when game is paused.
-pause_fps_max (FPS in pause menu) int 20
+pause_fps_max (FPS in pause menu) int 20 1
# Open the pause menu when the window's focus is lost. Does not pause if a formspec is
# open.
# View distance in nodes.
viewing_range (Viewing range) int 100 20 4000
-# Camera near plane distance in nodes, between 0 and 0.5
-# Most users will not need to change this.
+# Camera 'near clipping plane' distance in nodes, between 0 and 0.25
+# Only works on GLES platforms. Most users will not need to change this.
# Increasing can reduce artifacting on weaker GPUs.
# 0.1 = Default, 0.25 = Good value for weaker tablets.
-near_plane (Near plane) float 0.1 0 0.5
+near_plane (Near plane) float 0.1 0 0.25
# Width component of the initial window size.
-screen_w (Screen width) int 1024
+screen_w (Screen width) int 1024 1
# Height component of the initial window size.
-screen_h (Screen height) int 600
+screen_h (Screen height) int 600 1
# Save window size automatically when modified.
autosave_screensize (Autosave screen size) bool true
# Field of view in degrees.
fov (Field of view) int 72 45 160
-# Adjust the gamma encoding for the light tables. Higher numbers are brighter.
-# This setting is for the client only and is ignored by the server.
-display_gamma (Gamma) float 1.0 0.5 10.0
+# Alters the light curve by applying 'gamma correction' to it.
+# Higher values make middle and lower light levels brighter.
+# Value '1.0' leaves the light curve unaltered.
+# This only has significant effect on daylight and artificial
+# light, it has very little effect on natural night light.
+display_gamma (Light curve gamma) float 1.0 0.33 3.0
# Gradient of light curve at minimum light level.
-lighting_alpha (Darkness sharpness) float 0.0 0.0 4.0
+# Controls the contrast of the lowest light levels.
+lighting_alpha (Light curve low gradient) float 0.0 0.0 3.0
# Gradient of light curve at maximum light level.
-lighting_beta (Lightness sharpness) float 1.5 0.0 4.0
+# Controls the contrast of the highest light levels.
+lighting_beta (Light curve high gradient) float 1.5 0.0 3.0
-# Strength of light curve mid-boost.
-lighting_boost (Light curve mid boost) float 0.2 0.0 1.0
+# Strength of light curve boost.
+# The 3 'boost' parameters define a range of the light
+# curve that is boosted in brightness.
+lighting_boost (Light curve boost) float 0.2 0.0 0.4
-# Center of light curve mid-boost.
-lighting_boost_center (Light curve mid boost center) float 0.5 0.0 1.0
+# Center of light curve boost range.
+# Where 0.0 is minimum light level, 1.0 is maximum light level.
+lighting_boost_center (Light curve boost center) float 0.5 0.0 1.0
-# Spread of light curve mid-boost.
-# Standard deviation of the mid-boost gaussian.
-lighting_boost_spread (Light curve mid boost spread) float 0.2 0.0 1.0
+# Spread of light curve boost range.
+# Controls the width of the range to be boosted.
+# Standard deviation of the light curve boost Gaussian.
+lighting_boost_spread (Light curve boost spread) float 0.2 0.0 0.4
# Path to texture directory. All textures are first searched from here.
texture_path (Texture path) path
# True = 256
# False = 128
-# Useable to make minimap smoother on slower machines.
+# Usable to make minimap smoother on slower machines.
minimap_double_scan_height (Minimap scan height) bool true
# Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
# This will smooth over some of the rough edges, and blend
# pixels when scaling down, at the cost of blurring some
# edge pixels when images are scaled by non-integer sizes.
-gui_scaling (GUI scaling) float 1.0
+gui_scaling (GUI scaling) float 1.0 0.001
# When gui_scaling_filter is true, all GUI images need to be
# filtered in software, but some images are generated directly
tooltip_append_itemname (Append item name) bool false
# Whether FreeType fonts are used, requires FreeType support to be compiled in.
+# If disabled, bitmap and XML vectors fonts are used instead.
freetype (FreeType fonts) bool true
-# Path to TrueTypeFont or bitmap.
-font_path (Font path) filepath fonts/liberationsans.ttf
+font_bold (Font bold by default) bool false
-font_size (Font size) int 16
+font_italic (Font italic by default) bool false
-# Font shadow offset, if 0 then shadow will not be drawn.
+# Shadow offset (in pixels) of the default font. If 0, then shadow will not be drawn.
font_shadow (Font shadow) int 1
-# Font shadow alpha (opaqueness, between 0 and 255).
+# Opaqueness (alpha) of the shadow behind the default font, between 0 and 255.
font_shadow_alpha (Font shadow alpha) int 127 0 255
-mono_font_path (Monospace font path) filepath fonts/liberationmono.ttf
+# Font size of the default font in point (pt).
+font_size (Font size) int 16 1
-mono_font_size (Monospace font size) int 15
+# Path to the default font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# The fallback font will be used if the font cannot be loaded.
+font_path (Regular font path) filepath fonts/Arimo-Regular.ttf
-# This font will be used for certain languages.
-fallback_font_path (Fallback font) filepath fonts/DroidSansFallbackFull.ttf
-fallback_font_size (Fallback font size) int 15
+font_path_bold (Bold font path) filepath fonts/Arimo-Bold.ttf
+font_path_italic (Italic font path) filepath fonts/Arimo-Italic.ttf
+font_path_bolditalic (Bold and italic font path) filepath fonts/Arimo-BoldItalic.ttf
+
+# Font size of the monospace font in point (pt).
+mono_font_size (Monospace font size) int 15 1
+
+# Path to the monospace font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# This font is used for e.g. the console and profiler screen.
+mono_font_path (Monospace font path) filepath fonts/Cousine-Regular.ttf
+
+mono_font_path_bold (Bold monospace font path) filepath fonts/Cousine-Bold.ttf
+mono_font_path_italic (Italic monospace font path) filepath fonts/Cousine-Italic.ttf
+mono_font_path_bolditalic (Bold and italic monospace font path) filepath fonts/Cousine-BoldItalic.ttf
+
+# Font size of the fallback font in point (pt).
+fallback_font_size (Fallback font size) int 15 1
+
+# Shadow offset (in pixels) of the fallback font. If 0, then shadow will not be drawn.
fallback_font_shadow (Fallback font shadow) int 1
+
+# Opaqueness (alpha) of the shadow behind the fallback font, between 0 and 255.
fallback_font_shadow_alpha (Fallback font shadow alpha) int 128 0 255
-# Path to save screenshots at.
-screenshot_path (Screenshot folder) path
+# Path of the fallback font.
+# If “freetype” setting is enabled: Must be a TrueType font.
+# If “freetype” setting is disabled: Must be a bitmap or XML vectors font.
+# This font will be used for certain languages or if the default font is unavailable.
+fallback_font_path (Fallback font path) filepath fonts/DroidSansFallbackFull.ttf
+
+# Path to save screenshots at. Can be an absolute or relative path.
+# The folder will be created if it doesn't already exist.
+screenshot_path (Screenshot folder) path screenshots
# Format of screenshots.
screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
[*Advanced]
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
-screen_dpi (DPI) int 72
+screen_dpi (DPI) int 72 1
# Windows systems only: Start Minetest with the command line window in the background.
# Contains the same information as the file debug.txt (default name).
[Sound]
+# Enables the sound system.
+# If disabled, this completely disables all sounds everywhere and the in-game
+# sound controls will be non-functional.
+# Changing this setting requires a restart.
enable_sound (Sound) bool true
+# Volume of all sounds.
+# Requires the sound system to be enabled.
sound_volume (Volume) float 0.7 0.0 1.0
+# Whether to mute sounds. You can unmute sounds at any time, unless the
+# sound system is disabled (enable_sound=false).
+# In-game, you can toggle the mute state with the mute key or by using the
+# pause menu.
mute_sound (Mute sound) bool false
[Client]
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
+# Prometheus listener address.
+# If minetest is compiled with ENABLE_PROMETHEUS option enabled,
+# enable metrics listener for Prometheus on that address.
+# Metrics can be fetch on http://127.0.0.1:30000/metrics
+prometheus_listener_address (Prometheus listener address) string 127.0.0.1:30000
+
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
# Enable/disable running an IPv6 server.
# Ignored if bind_address is set.
+# Needs enable_ipv6 to be enabled.
ipv6_server (IPv6 server) bool false
[**Advanced]
# Setting it to -1 disables the feature.
item_entity_ttl (Item entity TTL) int 900
+# Specifies the default stack size of nodes, items and tools.
+# Note that mods or games may explicitly set a stack for certain (or all) items.
+default_stack_max (Default stack size) int 99
+
# Enable players getting damage and dying.
enable_damage (Damage) bool false
[**Physics]
+# Horizontal and vertical acceleration on ground or when climbing,
+# in nodes per second per second.
movement_acceleration_default (Default acceleration) float 3
+
+# Horizontal acceleration in air when jumping or falling,
+# in nodes per second per second.
movement_acceleration_air (Acceleration in air) float 2
+
+# Horizontal and vertical acceleration in fast mode,
+# in nodes per second per second.
movement_acceleration_fast (Fast mode acceleration) float 10
+
+# Walking and flying speed, in nodes per second.
movement_speed_walk (Walking speed) float 4
+
+# Sneaking speed, in nodes per second.
movement_speed_crouch (Sneaking speed) float 1.35
+
+# Walking, flying and climbing speed in fast mode, in nodes per second.
movement_speed_fast (Fast mode speed) float 20
+
+# Vertical climbing speed, in nodes per second.
movement_speed_climb (Climbing speed) float 3
+
+# Initial vertical speed when jumping, in nodes per second.
movement_speed_jump (Jumping speed) float 6.5
+
+# Decrease this to increase liquid resistance to movement.
movement_liquid_fluidity (Liquid fluidity) float 1
+
+# Maximum liquid resistance. Controls deceleration when entering liquid at
+# high speed.
movement_liquid_fluidity_smooth (Liquid fluidity smoothing) float 0.5
-movement_liquid_sink (Liquid sinking speed) float 10
+
+# Controls sinking speed in liquid.
+movement_liquid_sink (Liquid sinking) float 10
+
+# Acceleration of gravity, in nodes per second per second.
movement_gravity (Gravity) float 9.81
[**Advanced]
-# Handling for deprecated lua api calls:
+# Handling for deprecated Lua API calls:
# - legacy: (try to) mimic old behaviour (default for release).
# - log: mimic and log backtrace of deprecated call (default for debug).
# - error: abort on usage of deprecated call (suggested for mod developers).
# Set the language. Leave empty to use the system language.
# A restart is required after changing this.
-language (Language) enum ,be,ca,cs,da,de,dv,en,eo,es,et,fr,he,hu,id,it,ja,jbo,ko,ky,lt,ms,nb,nl,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,tr,uk,zh_CN,zh_TW
-
+language (Language) enum ,ar,ca,cs,da,de,dv,el,en,eo,es,et,eu,fil,fr,hu,id,it,ja,ja_KS,jbo,kk,kn,lo,lt,ms,my,nb,nl,nn,pl,pt,pt_BR,ro,ru,sl,sr_Cyrl,sv,sw,th,tr,uk,vi
# Level of logging to be written to debug.txt:
# - <nothing> (no logging)
# - verbose
debug_log_level (Debug log level) enum action ,none,error,warning,action,info,verbose
-# IPv6 support.
+# If the file size of debug.txt exceeds the number of megabytes specified in
+# this setting when it is opened, the file is moved to debug.txt.1,
+# deleting an older debug.txt.1 if it exists.
+# debug.txt is only moved if this setting is positive.
+debug_log_size_max (Debug log file size threshold) int 50
+
+# Enable IPv6 support (for both client and server).
+# Required for IPv6 connections to work at all.
enable_ipv6 (IPv6) bool true
[*Advanced]
# and junglegrass, in all other mapgens this flag controls all decorations.
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations,biomes caves,dungeons,light,decorations,biomes,nocaves,nodungeons,nolight,nodecorations,nobiomes
-# Whether dungeons occasionally project from the terrain.
-projecting_dungeons (Projecting dungeons) bool true
-
[*Biome API temperature and humidity noise parameters]
# Temperature variation for biomes.
mgv5_spflags (Mapgen V5 specific flags) flags caverns caverns,nocaverns
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgv5_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgv5_large_cave_depth (Large cave depth) int -256
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgv5_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgv5_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgv5_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgv5_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgv5_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgv5_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgv5_cavern_limit (Cavern limit) int -256
# Map generation attributes specific to Mapgen v6.
# The 'snowbiomes' flag enables the new 5 biome system.
-# When the new biome system is enabled jungles are automatically enabled and
+# When the 'snowbiomes' flag is enabled jungles are automatically enabled and
# the 'jungles' flag is ignored.
-mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
+mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,noflat,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
# Deserts occur when np_biome exceeds this value.
-# When the new biome system is enabled, this is ignored.
+# When the 'snowbiomes' flag is enabled, this is ignored.
mgv6_freq_desert (Desert noise threshold) float 0.45
# Sandy beaches occur when np_beach exceeds this value.
mgv7_mount_zero_level (Mountain zero level) int 0
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgv7_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgv7_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgv7_lava_depth (Lava depth) int -256
-
-# Controls the density of mountain-type floatlands.
-# Is a noise offset added to the 'mgv7_np_mountain' noise value.
-mgv7_float_mount_density (Floatland mountain density) float 0.6
+# Minimum limit of random number of small caves per mapchunk.
+mgv7_small_cave_num_min (Small cave minimum number) int 0 0 256
-# Typical maximum height, above and below midpoint, of floatland mountains.
-mgv7_float_mount_height (Floatland mountain height) float 128.0
+# Maximum limit of random number of small caves per mapchunk.
+mgv7_small_cave_num_max (Small cave maximum number) int 0 0 256
-# Alters how mountain-type floatlands taper above and below midpoint.
-mgv7_float_mount_exponent (Floatland mountain exponent) float 0.75
+# Minimum limit of random number of large caves per mapchunk.
+mgv7_large_cave_num_min (Large cave minimum number) int 0 0 64
-# Y-level of floatland midpoint and lake surface.
-mgv7_floatland_level (Floatland level) int 1280
+# Maximum limit of random number of large caves per mapchunk.
+mgv7_large_cave_num_max (Large cave maximum number) int 2 0 64
-# Y-level to which floatland shadows extend.
-mgv7_shadow_limit (Shadow limit) int 1024
+# Proportion of large caves that contain liquid.
+mgv7_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgv7_cavern_limit (Cavern limit) int -256
# Defines large-scale river channel structure.
mgv7_np_ridge_uwater (Ridge underwater noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
-# Defines areas of floatland smooth terrain.
-# Smooth floatlands occur when noise > 0.
-mgv7_np_floatland_base (Floatland base noise) noise_params_2d -0.6, 1.5, (600, 600, 600), 114, 5, 0.6, 2.0, eased
-
-# Variation of hill height and lake depth on floatland smooth terrain.
-mgv7_np_float_base_height (Floatland base height noise) noise_params_2d 48, 24, (300, 300, 300), 907, 4, 0.7, 2.0, eased
-
# 3D noise defining mountain structure and height.
# Also defines structure of floatland mountain terrain.
mgv7_np_mountain (Mountain noise) noise_params_3d -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
[*Mapgen Carpathian]
# Map generation attributes specific to Mapgen Carpathian.
-mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns,norivers caverns,nocaverns,rivers,norivers
+mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns,norivers caverns,rivers,nocaverns,norivers
# Defines the base ground level.
mgcarpathian_base_level (Base ground level) float 12.0
mgcarpathian_valley_width (River valley width) float 0.25
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgcarpathian_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgcarpathian_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgcarpathian_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgcarpathian_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgcarpathian_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgcarpathian_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgcarpathian_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgcarpathian_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Y-level of cavern upper limit.
mgcarpathian_cavern_limit (Cavern limit) int -256
[*Mapgen Flat]
-# Map generation attributes specific to Mapgen flat.
+# Map generation attributes specific to Mapgen Flat.
# Occasional lakes and hills can be added to the flat world.
mgflat_spflags (Mapgen Flat specific flags) flags nolakes,nohills lakes,hills,nolakes,nohills
# Y of upper limit of large caves.
mgflat_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgflat_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgflat_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgflat_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgflat_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgflat_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgflat_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgflat_cave_width (Cave width) float 0.09
# Terrain noise threshold for lakes.
[*Mapgen Fractal]
-# Map generation attributes specific to Mapgen flat.
+# Map generation attributes specific to Mapgen Fractal.
# 'terrain' enables the generation of non-fractal terrain:
# ocean, islands and underground.
mgfractal_spflags (Mapgen Fractal specific flags) flags terrain terrain,noterrain
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgfractal_cave_width (Cave width) float 0.09
# Y of upper limit of large caves.
mgfractal_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgfractal_lava_depth (Lava depth) int -256
+# Minimum limit of random number of small caves per mapchunk.
+mgfractal_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgfractal_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgfractal_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgfractal_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgfractal_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Lower Y limit of dungeons.
mgfractal_dungeon_ymin (Dungeon minimum Y) int -31000
mgfractal_dungeon_ymax (Dungeon maximum Y) int 31000
# Selects one of 18 fractal types.
-# 1 = 4D "Roundy" mandelbrot set.
-# 2 = 4D "Roundy" julia set.
-# 3 = 4D "Squarry" mandelbrot set.
-# 4 = 4D "Squarry" julia set.
-# 5 = 4D "Mandy Cousin" mandelbrot set.
-# 6 = 4D "Mandy Cousin" julia set.
-# 7 = 4D "Variation" mandelbrot set.
-# 8 = 4D "Variation" julia set.
-# 9 = 3D "Mandelbrot/Mandelbar" mandelbrot set.
-# 10 = 3D "Mandelbrot/Mandelbar" julia set.
-# 11 = 3D "Christmas Tree" mandelbrot set.
-# 12 = 3D "Christmas Tree" julia set.
-# 13 = 3D "Mandelbulb" mandelbrot set.
-# 14 = 3D "Mandelbulb" julia set.
-# 15 = 3D "Cosine Mandelbulb" mandelbrot set.
-# 16 = 3D "Cosine Mandelbulb" julia set.
-# 17 = 4D "Mandelbulb" mandelbrot set.
-# 18 = 4D "Mandelbulb" julia set.
+# 1 = 4D "Roundy" Mandelbrot set.
+# 2 = 4D "Roundy" Julia set.
+# 3 = 4D "Squarry" Mandelbrot set.
+# 4 = 4D "Squarry" Julia set.
+# 5 = 4D "Mandy Cousin" Mandelbrot set.
+# 6 = 4D "Mandy Cousin" Julia set.
+# 7 = 4D "Variation" Mandelbrot set.
+# 8 = 4D "Variation" Julia set.
+# 9 = 3D "Mandelbrot/Mandelbar" Mandelbrot set.
+# 10 = 3D "Mandelbrot/Mandelbar" Julia set.
+# 11 = 3D "Christmas Tree" Mandelbrot set.
+# 12 = 3D "Christmas Tree" Julia set.
+# 13 = 3D "Mandelbulb" Mandelbrot set.
+# 14 = 3D "Mandelbulb" Julia set.
+# 15 = 3D "Cosine Mandelbulb" Mandelbrot set.
+# 16 = 3D "Cosine Mandelbulb" Julia set.
+# 17 = 4D "Mandelbulb" Mandelbrot set.
+# 18 = 4D "Mandelbulb" Julia set.
mgfractal_fractal (Fractal type) int 1 1 18
# Iterations of the recursive function.
# Can be used to move a desired point to (0, 0) to create a
# suitable spawn point, or to allow 'zooming in' on a desired
# point by increasing 'scale'.
-# The default is tuned for a suitable spawn point for mandelbrot
+# The default is tuned for a suitable spawn point for Mandelbrot
# sets with default parameters, it may need altering in other
# situations.
# Range roughly -2 to 2. Multiply by 'scale' for offset in nodes.
# 'vary_river_depth': If enabled, low humidity and high heat causes rivers
# to become shallower and occasionally dry.
# 'altitude_dry': Reduces humidity with altitude.
-mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers,vary_river_depth,altitude_dry altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers,vary_river_depth,novary_river_depth,altitude_dry,noaltitude_dry
+mgvalleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers,vary_river_depth,altitude_dry altitude_chill,humid_rivers,vary_river_depth,altitude_dry,noaltitude_chill,nohumid_rivers,novary_river_depth,noaltitude_dry
# The vertical distance over which heat drops by 20 if 'altitude_chill' is
# enabled. Also the vertical distance over which humidity drops by 10 if
# Depth below which you'll find large caves.
mgvalleys_large_cave_depth (Large cave depth) int -33
-# Deprecated, define and locate cave liquids using biome definitions instead.
-# Y of upper limit of lava in large caves.
-mgvalleys_lava_depth (Lava depth) int 1
+# Minimum limit of random number of small caves per mapchunk.
+mgvalleys_small_cave_num_min (Small cave minimum number) int 0 0 256
+
+# Maximum limit of random number of small caves per mapchunk.
+mgvalleys_small_cave_num_max (Small cave maximum number) int 0 0 256
+
+# Minimum limit of random number of large caves per mapchunk.
+mgvalleys_large_cave_num_min (Large cave minimum number) int 0 0 64
+
+# Maximum limit of random number of large caves per mapchunk.
+mgvalleys_large_cave_num_max (Large cave maximum number) int 2 0 64
+
+# Proportion of large caves that contain liquid.
+mgvalleys_large_cave_flooded (Large cave proportion flooded) float 0.5 0.0 1.0
# Depth below which you'll find giant caverns.
mgvalleys_cavern_limit (Cavern upper limit) int -256
mgvalleys_river_size (River size) int 5
# Controls width of tunnels, a smaller value creates wider tunnels.
+# Value >= 10.0 completely disables generation of tunnels and avoids the
+# intensive noise calculations.
mgvalleys_cave_width (Cave width) float 0.09
# Lower Y limit of dungeons.
projects / minetest.git / blobdiff