-# Miri [](https://travis-ci.com/rust-lang/miri) [](https://ci.appveyor.com/project/rust-lang-libs/miri)
+# Miri
+[![Actions build status][actions-badge]][actions-url]
+
+[actions-badge]: https://github.com/rust-lang/miri/workflows/CI/badge.svg?branch=master
+[actions-url]: https://github.com/rust-lang/miri/actions
An experimental interpreter for [Rust][rust]'s
[mid-level intermediate representation][mir] (MIR). It can run binaries and
or an invalid enum discriminant)
* **Experimental**: Violations of the [Stacked Borrows] rules governing aliasing
for reference types
+* **Experimental**: Data races (but no weak memory effects)
On top of that, Miri will also tell you about memory leaks: when there is memory
still allocated at the end of the execution, and that memory is not reachable
-from a global `static`, Miri will raise an error. Note however that
-[leak checking is currently disabled on Windows targets](https://github.com/rust-lang/miri/issues/1302).
+from a global `static`, Miri will raise an error.
+
+You can use Miri to emulate programs on other targets, e.g. to ensure that
+byte-level data manipulation works correctly both on little-endian and
+big-endian systems. See
+[cross-interpretation](#cross-interpretation-running-for-different-targets)
+below.
Miri has already discovered some [real-world bugs](#bugs-found-by-miri). If you
found a bug with Miri, we'd appreciate if you tell us and we'll add it to the
still run fine in Miri -- but might break (including causing UB) on different
compiler versions or different platforms.
* Program execution is non-deterministic when it depends, for example, on where
- exactly in memory allocations end up. Miri tests one of many possible
- executions of your program. If your code is sensitive to allocation base
- addresses or other non-deterministic data, try running Miri with different
- values for `-Zmiri-seed` to test different executions.
+ exactly in memory allocations end up, or on the exact interleaving of
+ concurrent threads. Miri tests one of many possible executions of your
+ program. You can alleviate this to some extent by running Miri with different
+ values for `-Zmiri-seed`, but that will still by far not explore all possible
+ executions.
* Miri runs the program as a platform-independent interpreter, so the program
has no access to most platform-specific APIs or FFI. A few APIs have been
implemented (such as printing to stdout) but most have not: for example, Miri
currently does not support SIMD or networking.
-* Miri currently does not check for data-races and most other concurrency-related
- issues.
[rust]: https://www.rust-lang.org/
[mir]: https://github.com/rust-lang/rfcs/blob/master/text/1211-mir.md
The first time you run Miri, it will perform some extra setup and install some
dependencies. It will ask you for confirmation before installing anything.
-Miri supports cross-execution: if you want to run the program as if it was a
-Linux program, you can do `cargo miri run --target x86_64-unknown-linux-gnu`.
-This is particularly useful if you are using Windows, as the Linux target is
-much better supported than Windows targets.
-
-You can pass arguments to Miri after the first `--`, and pass arguments to the
-interpreted program or test suite after the second `--`. For example, `cargo
-miri run -- -Zmiri-disable-validation` runs the program without validation of
-basic type invariants and without checking the aliasing of references.
+`cargo miri run/test` supports the exact same flags as `cargo run/test`. You
+can pass arguments to Miri via `MIRIFLAGS`. For example,
+`MIRIFLAGS="-Zmiri-disable-stacked-borrows" cargo miri run` runs the program
+without checking the aliasing of references.
-When compiling code via `cargo miri`, the `miri` config flag is set. You can
-use this to ignore test cases that fail under Miri because they do things Miri
-does not support:
+When compiling code via `cargo miri`, the `cfg(miri)` config flag is set. You
+can use this to ignore test cases that fail under Miri because they do things
+Miri does not support:
```rust
#[test]
interpreter will explicitly tell you when it finds something unsupported:
```
-error: unsupported operation: Miri does not support threading
+error: unsupported operation: can't call foreign function: bind
...
= help: this is likely not a bug in the program; it indicates that the program \
performed an operation that the interpreter does not support
```
+### Cross-interpretation: running for different targets
+
+Miri can not only run a binary or test suite for your host target, it can also
+perform cross-interpretation for arbitrary foreign targets: `cargo miri run
+--target x86_64-unknown-linux-gnu` will run your program as if it was a Linux
+program, no matter your host OS. This is particularly useful if you are using
+Windows, as the Linux target is much better supported than Windows targets.
+
+You can also use this to test platforms with different properties than your host
+platform. For example `cargo miri test --target mips64-unknown-linux-gnuabi64`
+will run your test suite on a big-endian target, which is useful for testing
+endian-sensitive code.
+
### Running Miri on CI
To run Miri on CI, make sure that you handle the case where the latest nightly
When using the above instructions, you may encounter a number of confusing compiler
errors.
+### "note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace"
+
+You may see this when trying to get Miri to display a backtrace. By default, Miri
+doesn't expose any environment to the program, so running
+`RUST_BACKTRACE=1 cargo miri test` will not do what you expect.
+
+To get a backtrace, you need to disable isolation
+[using `-Zmiri-disable-isolation`](#miri-flags):
+
+```sh
+RUST_BACKTRACE=1 MIRIFLAGS="-Zmiri-disable-isolation" cargo miri test
+```
+
#### "found possibly newer version of crate `std` which `<dependency>` depends on"
Your build directory may contain artifacts from an earlier build that have/have
This means the sysroot you are using was not compiled with Miri in mind. This
should never happen when you use `cargo miri` because that takes care of setting
-up the sysroot. If you are using `miri` (the Miri driver) directly, see
-[CONTRIBUTING.md](CONTRIBUTING.md) for how to use `./miri`.
+up the sysroot. If you are using `miri` (the Miri driver) directly, see the
+[contributors' guide](CONTRIBUTING.md) for how to use `./miri` to best do that.
## Miri `-Z` flags and environment variables
[miri-flags]: #miri--z-flags-and-environment-variables
-Miri adds its own set of `-Z` flags:
-
-* `-Zmiri-disable-alignment-check` disables checking pointer alignment. This is
- useful to avoid [false positives][alignment-false-positives]. However, setting
- this flag means Miri could miss bugs in your program.
+Miri adds its own set of `-Z` flags, which are usually set via the `MIRIFLAGS`
+environment variable:
+
+* `-Zmiri-compare-exchange-weak-failure-rate=<rate>` changes the failure rate of
+ `compare_exchange_weak` operations. The default is `0.8` (so 4 out of 5 weak ops will fail).
+ You can change it to any value between `0.0` and `1.0`, where `1.0` means it
+ will always fail and `0.0` means it will never fail.
+* `-Zmiri-disable-alignment-check` disables checking pointer alignment, so you
+ can focus on other failures, but it means Miri can miss bugs in your program.
+ Using this flag is **unsound**.
+* `-Zmiri-disable-data-race-detector` disables checking for data races. Using
+ this flag is **unsound**.
* `-Zmiri-disable-stacked-borrows` disables checking the experimental
[Stacked Borrows] aliasing rules. This can make Miri run faster, but it also
- means no aliasing violations will be detected.
+ means no aliasing violations will be detected. Using this flag is **unsound**
+ (but the affected soundness rules are experimental).
* `-Zmiri-disable-validation` disables enforcing validity invariants, which are
enforced by default. This is mostly useful to focus on other failures (such
- as out-of-bounds accesses) first. Setting this flag means Miri will miss bugs
- in your program. However, this can also help to make Miri run faster.
+ as out-of-bounds accesses) first. Setting this flag means Miri can miss bugs
+ in your program. However, this can also help to make Miri run faster. Using
+ this flag is **unsound**.
* `-Zmiri-disable-isolation` disables host isolation. As a consequence,
the program has access to host resources such as environment variables, file
systems, and randomness.
entropy. The default seed is 0. **NOTE**: This entropy is not good enough
for cryptographic use! Do not generate secret keys in Miri or perform other
kinds of cryptographic operations that rely on proper random numbers.
+* `-Zmiri-symbolic-alignment-check` makes the alignment check more strict. By
+ default, alignment is checked by casting the pointer to an integer, and making
+ sure that is a multiple of the alignment. This can lead to cases where a
+ program passes the alignment check by pure chance, because things "happened to
+ be" sufficiently aligned -- there is no UB in this execution but there would
+ be UB in others. To avoid such cases, the symbolic alignment check only takes
+ into account the requested alignment of the relevant allocation, and the
+ offset into that allocation. This avoids missing such bugs, but it also
+ incurs some false positives when the code does manual integer arithmetic to
+ ensure alignment. (The standard library `align_to` method works fine in both
+ modes; under symbolic alignment it only fills the middle slice when the
+ allocation guarantees sufficient alignment.)
* `-Zmiri-track-alloc-id=<id>` shows a backtrace when the given allocation is
being allocated or freed. This helps in debugging memory leaks and
use after free bugs.
+* `-Zmiri-track-call-id=<id>` shows a backtrace when the given call id is
+ assigned to a stack frame. This helps in debugging UB related to Stacked
+ Borrows "protectors".
* `-Zmiri-track-pointer-tag=<tag>` shows a backtrace when the given pointer tag
is popped from a borrow stack (which is where the tag becomes invalid and any
future use of it will error). This helps you in finding out why UB is
happening and where in your code would be a good place to look for it.
-
-[alignment-false-positives]: https://github.com/rust-lang/miri/issues/1074
+* `-Zmiri-track-raw-pointers` makes Stacked Borrows track a pointer tag even for
+ raw pointers. This can make valid code fail to pass the checks, but also can
+ help identify latent aliasing issues in code that Miri accepts by default. You
+ can recognize false positives by "<untagged>" occurring in the message -- this
+ indicates a pointer that was cast from an integer, so Miri was unable to track
+ this pointer.
Some native rustc `-Z` flags are also very relevant for Miri:
Moreover, Miri recognizes some environment variables:
* `MIRI_LOG`, `MIRI_BACKTRACE` control logging and backtrace printing during
- Miri executions, also [see above][testing-miri].
+ Miri executions, also [see "Testing the Miri driver" in `CONTRIBUTING.md`][testing-miri].
+* `MIRIFLAGS` (recognized by `cargo miri` and the test suite) defines extra
+ flags to be passed to Miri.
* `MIRI_SYSROOT` (recognized by `cargo miri` and the test suite)
indicates the sysroot to use. To do the same thing with `miri`
directly, use the `--sysroot` flag.
* `MIRI_TEST_TARGET` (recognized by the test suite) indicates which target
architecture to test against. `miri` and `cargo miri` accept the `--target`
flag for the same purpose.
-* `MIRI_TEST_FLAGS` (recognized by the test suite) defines extra flags to be
- passed to Miri.
The following environment variables are internal, but used to communicate between
different Miri binaries, and as such worth documenting:
* `MIRI_BE_RUSTC` when set to any value tells the Miri driver to actually not
interpret the code but compile it like rustc would. This is useful to be sure
that the compiled `rlib`s are compatible with Miri.
+ When set while running `cargo-miri`, it indicates that we are part of a sysroot
+ build (for which some crates need special treatment).
+* `MIRI_CWD` when set to any value tells the Miri driver to change to the given
+ directory after loading all the source files, but before commencing
+ interpretation. This is useful if the interpreted program wants a different
+ working directory at run-time than at build-time.
+* `MIRI_VERBOSE` when set to any value tells the various `cargo-miri` phases to
+ perform verbose logging.
+
+[testing-miri]: CONTRIBUTING.md#testing-the-miri-driver
+
+## Miri `extern` functions
+
+Miri provides some `extern` functions that programs can import to access
+Miri-specific functionality:
+
+```rust
+#[cfg(miri)]
+extern "Rust" {
+ /// Miri-provided extern function to mark the block `ptr` points to as a "root"
+ /// for some static memory. This memory and everything reachable by it is not
+ /// considered leaking even if it still exists when the program terminates.
+ ///
+ /// `ptr` has to point to the beginning of an allocated block.
+ fn miri_static_root(ptr: *const u8);
+
+ /// Miri-provided extern function to obtain a backtrace of the current call stack.
+ /// This returns a boxed slice of pointers - each pointer is an opaque value
+ /// that is only useful when passed to `miri_resolve_frame`
+ /// The `flags` argument must be `0`.
+ fn miri_get_backtrace(flags: u64) -> Box<[*mut ()]>;
+
+ /// Miri-provided extern function to resolve a frame pointer obtained
+ /// from `miri_get_backtrace`. The `flags` argument must be `0`,
+ /// and `MiriFrame` should be declared as follows:
+ ///
+ /// ```rust
+ /// #[repr(C)]
+ /// struct MiriFrame {
+ /// // The name of the function being executed, encoded in UTF-8
+ /// name: Box<[u8]>,
+ /// // The filename of the function being executed, encoded in UTF-8
+ /// filename: Box<[u8]>,
+ /// // The line number currently being executed in `filename`, starting from '1'.
+ /// lineno: u32,
+ /// // The column number currently being executed in `filename`, starting from '1'.
+ /// colno: u32,
+ /// // The function pointer to the function currently being executed.
+ /// // This can be compared against function pointers obtained by
+ /// // casting a function (e.g. `my_fn as *mut ()`)
+ /// fn_ptr: *mut ()
+ /// }
+ /// ```
+ ///
+ /// The fields must be declared in exactly the same order as they appear in `MiriFrame` above.
+ /// This function can be called on any thread (not just the one which obtained `frame`).
+ fn miri_resolve_frame(frame: *mut (), flags: u64) -> MiriFrame;
+
+ /// Miri-provided extern function to begin unwinding with the given payload.
+ ///
+ /// This is internal and unstable and should not be used; we give it here
+ /// just to be complete.
+ fn miri_start_panic(payload: *mut u8) -> !;
+}
+```
## Contributing and getting help
[contribution guide](CONTRIBUTING.md).
For help with running Miri, you can open an issue here on
-GitHub or contact us (`oli-obk` and `RalfJ`) on the [Rust Zulip].
+GitHub or use the [Miri stream on the Rust Zulip][zulip].
-[Rust Zulip]: https://rust-lang.zulipchat.com
+[zulip]: https://rust-lang.zulipchat.com/#narrow/stream/269128-miri
## History
* [TiKV performing an unaligned pointer access](https://github.com/tikv/tikv/issues/7613)
* [`servo_arc` creating a dangling shared reference](https://github.com/servo/servo/issues/26357)
* [TiKV constructing out-of-bounds pointers (and overlapping mutable references)](https://github.com/tikv/tikv/pull/7751)
+* [`encoding_rs` doing out-of-bounds pointer arithmetic](https://github.com/hsivonen/encoding_rs/pull/53)
+* [TiKV using `Vec::from_raw_parts` incorrectly](https://github.com/tikv/agatedb/pull/24)
Violations of [Stacked Borrows] found that are likely bugs (but Stacked Borrows is currently just an experiment):
-* [`VecDeque` creating overlapping mutable references](https://github.com/rust-lang/rust/pull/56161)
-* [`BTreeMap` creating mutable references that overlap with shared references](https://github.com/rust-lang/rust/pull/58431)
-* [`LinkedList` creating overlapping mutable references](https://github.com/rust-lang/rust/pull/60072)
+* [`VecDeque::drain` creating overlapping mutable references](https://github.com/rust-lang/rust/pull/56161)
+* Various `BTreeMap` problems
+ * [`BTreeMap` iterators creating mutable references that overlap with shared references](https://github.com/rust-lang/rust/pull/58431)
+ * [`BTreeMap::iter_mut` creating overlapping mutable references](https://github.com/rust-lang/rust/issues/73915)
+ * [`BTreeMap` node insertion using raw pointers outside their valid memory area](https://github.com/rust-lang/rust/issues/78477)
+* [`LinkedList` cursor insertion creating overlapping mutable references](https://github.com/rust-lang/rust/pull/60072)
* [`Vec::push` invalidating existing references into the vector](https://github.com/rust-lang/rust/issues/60847)
* [`align_to_mut` violating uniqueness of mutable references](https://github.com/rust-lang/rust/issues/68549)
* [`sized-chunks` creating aliasing mutable references](https://github.com/bodil/sized-chunks/issues/8)
* [`ryu` using raw pointers outside their valid memory area](https://github.com/dtolnay/ryu/issues/24)
* [ink! creating overlapping mutable references](https://github.com/rust-lang/miri/issues/1364)
* [TiKV creating overlapping mutable reference and raw pointer](https://github.com/tikv/tikv/pull/7709)
+* [Windows `Env` iterator using a raw pointer outside its valid memory area](https://github.com/rust-lang/rust/pull/70479)
+* [`VecDeque::iter_mut` creating overlapping mutable references](https://github.com/rust-lang/rust/issues/74029)
+* [Various standard library aliasing issues involving raw pointers](https://github.com/rust-lang/rust/pull/78602)
## License
Licensed under either of
+
* Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or
http://www.apache.org/licenses/LICENSE-2.0)
* MIT license ([LICENSE-MIT](LICENSE-MIT) or
- http://opensource.org/licenses/MIT) at your option.
+ http://opensource.org/licenses/MIT)
+
+at your option.
### Contribution
projects / rust.git / blobdiff