Clippy welcomes contributions from everyone. There are many ways to contribute to Clippy and the following document
explains how you can contribute and how to get started. If you have any questions about contributing or need help with
-anything, feel free to ask questions on issues or visit the `#clippy` on [Discord].
+anything, feel free to ask questions on issues or visit the `#clippy` on [Zulip].
All contributors are expected to follow the [Rust Code of Conduct].
- [Contributing to Clippy](#contributing-to-clippy)
- [Getting started](#getting-started)
+ - [High level approach](#high-level-approach)
- [Finding something to fix/improve](#finding-something-to-fiximprove)
- [Writing code](#writing-code)
- [Getting code-completion for rustc internals to work](#getting-code-completion-for-rustc-internals-to-work)
- [How Clippy works](#how-clippy-works)
- - [Fixing build failures caused by Rust](#fixing-build-failures-caused-by-rust)
+ - [Syncing changes between Clippy and `rust-lang/rust`](#syncing-changes-between-clippy-and-rust-langrust)
+ - [Patching git-subtree to work with big repos](#patching-git-subtree-to-work-with-big-repos)
+ - [Performing the sync from `rust-lang/rust` to Clippy](#performing-the-sync-from-rust-langrust-to-clippy)
+ - [Performing the sync from Clippy to `rust-lang/rust`](#performing-the-sync-from-clippy-to-rust-langrust)
+ - [Defining remotes](#defining-remotes)
- [Issue and PR triage](#issue-and-pr-triage)
- [Bors and Homu](#bors-and-homu)
- [Contributions](#contributions)
-[Discord]: https://discord.gg/rust-lang
+[Zulip]: https://rust-lang.zulipchat.com/#narrow/stream/clippy
[Rust Code of Conduct]: https://www.rust-lang.org/policies/code-of-conduct
## Getting started
-High level approach:
+**Note: If this is your first time contributing to Clippy, you should
+first read the [Basics docs](doc/basics.md).**
+
+### High level approach
1. Find something to fix/improve
2. Change code (likely some file in `clippy_lints/src/`)
-3. Follow the instructions in the [Basics docs](doc/basics.md) such as running the `setup-toolchain.sh` script
+3. Follow the instructions in the [Basics docs](doc/basics.md) to get set up
4. Run `cargo test` in the root directory and wiggle code until it passes
5. Open a PR (also can be done after 2. if you run into problems)
Usually the lint will end up to be a nested series of matches and ifs, [like so][deep-nesting].
But we can make it nest-less by using [if_chain] macro, [like this][nest-less].
-[`E-medium`] issues are generally pretty easy too, though it's recommended you work on an E-easy issue first.
-They are mostly classified as [`E-medium`], since they might be somewhat involved code wise,
-but not difficult per-se.
+[`E-medium`] issues are generally pretty easy too, though it's recommended you work on an [`good first issue`]
+first. Sometimes they are only somewhat involved code wise, but not difficult per-se.
+Note that [`E-medium`] issues may require some knowledge of Clippy internals or some
+debugging to find the actual problem behind the issue.
[`T-middle`] issues can be more involved and require verifying types. The [`ty`] module contains a
lot of methods that are useful, though one of the most useful would be `expr_ty` (gives the type of
`git clone https://github.com/rust-lang/rust/`.
Then you can run a `cargo dev` command to automatically make Clippy use the rustc-repo via path-dependencies
which rust-analyzer will be able to understand.
-Run `cargo dev ra-setup --repo-path <repo-path>` where `<repo-path>` is an absolute path to the rustc repo
+Run `cargo dev ra_setup --repo-path <repo-path>` where `<repo-path>` is an absolute path to the rustc repo
you just cloned.
The command will add path-dependencies pointing towards rustc-crates inside the rustc repo to
Clippys `Cargo.toml`s and should allow rust-analyzer to understand most of the types that Clippy uses.
[early_lint_pass]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint/trait.EarlyLintPass.html
[late_lint_pass]: https://doc.rust-lang.org/nightly/nightly-rustc/rustc_lint/trait.LateLintPass.html
-## Fixing build failures caused by Rust
+## Syncing changes between Clippy and [`rust-lang/rust`]
+
+Clippy currently gets built with a pinned nightly version.
+
+In the `rust-lang/rust` repository, where rustc resides, there's a copy of Clippy
+that compiler hackers modify from time to time to adapt to changes in the unstable
+API of the compiler.
+
+We need to sync these changes back to this repository periodically, and the changes
+made to this repository in the meantime also need to be synced to the `rust-lang/rust` repository.
+
+To avoid flooding the `rust-lang/rust` PR queue, this two-way sync process is done
+in a bi-weekly basis if there's no urgent changes. This is done starting on the day of
+the Rust stable release and then every other week. That way we guarantee that we keep
+this repo up to date with the latest compiler API, and every feature in Clippy is available
+for 2 weeks in nightly, before it can get to beta. For reference, the first sync
+following this cadence was performed the 2020-08-27.
+
+This process is described in detail in the following sections. For general information
+about `subtree`s in the Rust repository see [Rust's `CONTRIBUTING.md`][subtree].
-Clippy currently gets built with `rustc` of the `rust-lang/rust` `master`
-branch. Most of the times we have to adapt to the changes and only very rarely
-there's an actual bug in Rust.
+### Patching git-subtree to work with big repos
-If you decide to make Clippy work again with a Rust commit that breaks it, you
-have to sync the `rust-lang/rust-clippy` repository with the `subtree` copy of
-Clippy in the `rust-lang/rust` repository.
+Currently there's a bug in `git-subtree` that prevents it from working properly
+with the [`rust-lang/rust`] repo. There's an open PR to fix that, but it's stale.
+Before continuing with the following steps, we need to manually apply that fix to
+our local copy of `git-subtree`.
-For general information about `subtree`s in the Rust repository see [Rust's
-`CONTRIBUTING.md`][subtree].
+You can get the patched version of `git-subtree` from [here][gitgitgadget-pr].
+Put this file under `/usr/lib/git-core` (taking a backup of the previous file)
+and make sure it has the proper permissions:
+
+```bash
+sudo cp --backup /path/to/patched/git-subtree.sh /usr/lib/git-core/git-subtree
+sudo chmod --reference=/usr/lib/git-core/git-subtree~ /usr/lib/git-core/git-subtree
+sudo chown --reference=/usr/lib/git-core/git-subtree~ /usr/lib/git-core/git-subtree
+```
+
+_Note:_ The first time running `git subtree push` a cache has to be built. This
+involves going through the complete Clippy history once. For this you have to
+increase the stack limit though, which you can do with `ulimit -s 60000`.
+Make sure to run the `ulimit` command from the same session you call git subtree.
+
+_Note:_ If you are a Debian user, `dash` is the shell used by default for scripts instead of `sh`.
+This shell has a hardcoded recursion limit set to 1000. In order to make this process work,
+you need to force the script to run `bash` instead. You can do this by editing the first
+line of the `git-subtree` script and changing `sh` to `bash`.
+
+### Performing the sync from [`rust-lang/rust`] to Clippy
Here is a TL;DR version of the sync process (all of the following commands have
to be run inside the `rust` directory):
-1. Clone the [`rust-lang/rust`] repository
-2. Sync the changes to the rust-copy of Clippy to your Clippy fork:
+1. Clone the [`rust-lang/rust`] repository or make sure it is up to date.
+2. Checkout the commit from the latest available nightly. You can get it using `rustup check`.
+3. Sync the changes to the rust-copy of Clippy to your Clippy fork:
```bash
# Make sure to change `your-github-name` to your github name in the following command
git subtree push -P src/tools/clippy git@github.com:your-github-name/rust-clippy sync-from-rust
```
+
_Note:_ This will directly push to the remote repository. You can also push
to your local copy by replacing the remote address with `/path/to/rust-clippy`
directory.
git checkout sync-from-rust
git merge upstream/master
```
-3. Open a PR to `rust-lang/rust-clippy` and wait for it to get merged (to
+4. Open a PR to `rust-lang/rust-clippy` and wait for it to get merged (to
accelerate the process ping the `@rust-lang/clippy` team in your PR and/or
- ~~annoy~~ ask them in the [Discord] channel.)
-4. Sync the `rust-lang/rust-clippy` master to the rust-copy of Clippy:
+ ~~annoy~~ ask them in the [Zulip] stream.)
+
+### Performing the sync from Clippy to [`rust-lang/rust`]
+
+All of the following commands have to be run inside the `rust` directory.
+
+1. Make sure Clippy itself is up-to-date by following the steps outlined in the previous
+section if necessary.
+
+2. Sync the `rust-lang/rust-clippy` master to the rust-copy of Clippy:
```bash
git checkout -b sync-from-clippy
git subtree pull -P src/tools/clippy https://github.com/rust-lang/rust-clippy master
```
-5. Open a PR to [`rust-lang/rust`]
+3. Open a PR to [`rust-lang/rust`]
+
+### Defining remotes
-Also, you may want to define remotes, so you don't have to type out the remote
+You may want to define remotes, so you don't have to type out the remote
addresses on every sync. You can do this with the following commands (these
commands still have to be run inside the `rust` directory):
$ git subtree push -P src/tools/clippy clippy-local sync-from-rust
```
-_Note:_ The first time running `git subtree push` a cache has to be built. This
-involves going through the complete Clippy history once. For this you have to
-increase the stack limit though, which you can do with `ulimit -s 60000`. For
-this to work, you will need the fix of `git subtree` available
-[here][gitgitgadget-pr].
-
[gitgitgadget-pr]: https://github.com/gitgitgadget/git/pull/493
[subtree]: https://rustc-dev-guide.rust-lang.org/contributing.html#external-dependencies-subtree
[`rust-lang/rust`]: https://github.com/rust-lang/rust
commands [here][homu_instructions].
[triage]: https://forge.rust-lang.org/release/triage-procedure.html
-[l-crash]: https://github.com/rust-lang/rust-clippy/labels/L-crash%20%3Aboom%3A
-[l-bug]: https://github.com/rust-lang/rust-clippy/labels/L-bug%20%3Abeetle%3A
+[l-crash]: https://github.com/rust-lang/rust-clippy/labels/L-crash
+[l-bug]: https://github.com/rust-lang/rust-clippy/labels/L-bug
[homu]: https://github.com/rust-lang/homu
-[homu_instructions]: https://buildbot2.rust-lang.org/homu/
-[homu_queue]: https://buildbot2.rust-lang.org/homu/queue/clippy
+[homu_instructions]: https://bors.rust-lang.org/
+[homu_queue]: https://bors.rust-lang.org/queue/clippy
## Contributions
projects / rust.git / blobdiff