- [Finding something to fix/improve](#finding-something-to-fiximprove)
- [Writing code](#writing-code)
- [Getting code-completion for rustc internals to work](#getting-code-completion-for-rustc-internals-to-work)
+ - [IntelliJ Rust](#intellij-rust)
+ - [Rust Analyzer](#rust-analyzer)
- [How Clippy works](#how-clippy-works)
- - [Fixing build failures caused by Rust](#fixing-build-failures-caused-by-rust)
+ - [Syncing changes between Clippy and `rust-lang/rust`](#syncing-changes-between-clippy-and-rust-langrust)
- [Patching git-subtree to work with big repos](#patching-git-subtree-to-work-with-big-repos)
- - [Performing the sync](#performing-the-sync)
- - [Syncing back changes in Clippy to [`rust-lang/rust`]](#syncing-back-changes-in-clippy-to-rust-langrust)
+ - [Performing the sync from `rust-lang/rust` to Clippy](#performing-the-sync-from-rust-langrust-to-clippy)
+ - [Performing the sync from Clippy to `rust-lang/rust`](#performing-the-sync-from-clippy-to-rust-langrust)
- [Defining remotes](#defining-remotes)
- [Issue and PR triage](#issue-and-pr-triage)
- [Bors and Homu](#bors-and-homu)
### Finding something to fix/improve
-All issues on Clippy are mentored, if you want help with a bug just ask
-@Manishearth, @flip1995, @phansch or @yaahc.
+All issues on Clippy are mentored, if you want help simply ask @Manishearth, @flip1995, @phansch
+or @llogiq directly by mentioning them in the issue or over on [Zulip]. This list may be out of date.
+All currently active mentors can be found [here](https://github.com/rust-lang/highfive/blob/master/highfive/configs/rust-lang/rust-clippy.json#L3)
-Some issues are easier than others. The [`good first issue`] label can be used to find the easy issues.
-If you want to work on an issue, please leave a comment so that we can assign it to you!
+Some issues are easier than others. The [`good-first-issue`] label can be used to find the easy
+issues. You can use `@rustbot claim` to assign the issue to yourself.
There are also some abandoned PRs, marked with [`S-inactive-closed`].
Pretty often these PRs are nearly completed and just need some extra steps
Usually the lint will end up to be a nested series of matches and ifs, [like so][deep-nesting].
But we can make it nest-less by using [if_chain] macro, [like this][nest-less].
-[`E-medium`] issues are generally pretty easy too, though it's recommended you work on an [`good first issue`]
+[`E-medium`] issues are generally pretty easy too, though it's recommended you work on an [`good-first-issue`]
first. Sometimes they are only somewhat involved code wise, but not difficult per-se.
Note that [`E-medium`] issues may require some knowledge of Clippy internals or some
debugging to find the actual problem behind the issue.
lot of methods that are useful, though one of the most useful would be `expr_ty` (gives the type of
an AST expression). `match_def_path()` in Clippy's `utils` module can also be useful.
-[`good first issue`]: https://github.com/rust-lang/rust-clippy/labels/good%20first%20issue
+[`good-first-issue`]: https://github.com/rust-lang/rust-clippy/labels/good-first-issue
[`S-inactive-closed`]: https://github.com/rust-lang/rust-clippy/pulls?q=is%3Aclosed+label%3AS-inactive-closed
[`T-AST`]: https://github.com/rust-lang/rust-clippy/labels/T-AST
[`T-middle`]: https://github.com/rust-lang/rust-clippy/labels/T-middle
## Getting code-completion for rustc internals to work
-Unfortunately, [`rust-analyzer`][ra_homepage] does not (yet?) understand how Clippy uses compiler-internals
+### IntelliJ Rust
+Unfortunately, [`IntelliJ Rust`][IntelliJ_rust_homepage] does not (yet?) understand how Clippy uses compiler-internals
using `extern crate` and it also needs to be able to read the source files of the rustc-compiler which are not
available via a `rustup` component at the time of writing.
To work around this, you need to have a copy of the [rustc-repo][rustc_repo] available which can be obtained via
`git clone https://github.com/rust-lang/rust/`.
Then you can run a `cargo dev` command to automatically make Clippy use the rustc-repo via path-dependencies
-which rust-analyzer will be able to understand.
-Run `cargo dev ra-setup --repo-path <repo-path>` where `<repo-path>` is an absolute path to the rustc repo
+which `IntelliJ Rust` will be able to understand.
+Run `cargo dev setup intellij --repo-path <repo-path>` where `<repo-path>` is a path to the rustc repo
you just cloned.
The command will add path-dependencies pointing towards rustc-crates inside the rustc repo to
-Clippys `Cargo.toml`s and should allow rust-analyzer to understand most of the types that Clippy uses.
+Clippys `Cargo.toml`s and should allow `IntelliJ Rust` to understand most of the types that Clippy uses.
Just make sure to remove the dependencies again before finally making a pull request!
-[ra_homepage]: https://rust-analyzer.github.io/
[rustc_repo]: https://github.com/rust-lang/rust/
+[IntelliJ_rust_homepage]: https://intellij-rust.github.io/
+
+### Rust Analyzer
+As of [#6869][6869], [`rust-analyzer`][ra_homepage] can understand that Clippy uses compiler-internals
+using `extern crate` when `package.metadata.rust-analyzer.rustc_private` is set to `true` in Clippys `Cargo.toml.`
+You will required a `nightly` toolchain with the `rustc-dev` component installed.
+Make sure that in the `rust-analyzer` configuration, you set
+```
+{ "rust-analyzer.rustcSource": "discover" }
+```
+and
+```
+{ "rust-analyzer.updates.channel": "nightly" }
+```
+You should be able to see information on things like `Expr` or `EarlyContext` now if you hover them, also
+a lot more type hints.
+This will work with `rust-analyzer 2021-03-15` shipped in nightly `1.52.0-nightly (107896c32 2021-03-15)` or later.
+
+[ra_homepage]: https://rust-analyzer.github.io/
+[6869]: https://github.com/rust-lang/rust-clippy/pull/6869
## How Clippy works
responding to issues there may not always be enough time to stay on top of it
all.
-Our highest priority is fixing [crashes][l-crash] and [bugs][l-bug]. We don't
+Our highest priority is fixing [crashes][l-crash] and [bugs][l-bug], for example
+an ICE in a popular crate that many other crates depend on. We don't
want Clippy to crash on your code and we want it to be as reliable as the
suggestions from Rust compiler errors.
+We have prioritization labels and a sync-blocker label, which are described below.
+- [P-low][p-low]: Requires attention (fix/response/evaluation) by a team member but isn't urgent.
+- [P-medium][p-medium]: Should be addressed by a team member until the next sync.
+- [P-high][p-high]: Should be immediately addressed and will require an out-of-cycle sync or a backport.
+- [L-sync-blocker][l-sync-blocker]: An issue that "blocks" a sync.
+Or rather: before the sync this should be addressed,
+e.g. by removing a lint again, so it doesn't hit beta/stable.
+
## Bors and Homu
We use a bot powered by [Homu][homu] to help automate testing and landing of pull
[triage]: https://forge.rust-lang.org/release/triage-procedure.html
[l-crash]: https://github.com/rust-lang/rust-clippy/labels/L-crash
[l-bug]: https://github.com/rust-lang/rust-clippy/labels/L-bug
+[p-low]: https://github.com/rust-lang/rust-clippy/labels/P-low
+[p-medium]: https://github.com/rust-lang/rust-clippy/labels/P-medium
+[p-high]: https://github.com/rust-lang/rust-clippy/labels/P-high
+[l-sync-blocker]: https://github.com/rust-lang/rust-clippy/labels/L-sync-blocker
[homu]: https://github.com/rust-lang/homu
[homu_instructions]: https://bors.rust-lang.org/
[homu_queue]: https://bors.rust-lang.org/queue/clippy
projects / rust.git / blobdiff