sys/src/9/pc/mouse.c

   1 #include "u.h"
   2 #include "../port/lib.h"
   3 #include "mem.h"
   4 #include "dat.h"
   5 #include "fns.h"
   6 #include "../port/error.h"
   7 #include "io.h"
   8
   9 #define Image   IMAGE
  10 #include <draw.h>
  11 #include <memdraw.h>
  12 #include <cursor.h>
  13 #include "screen.h"
  14
  15 /*
  16  *  mouse types
  17  */
  18 enum
  19 {
  20         Mouseother=     0,
  21         Mouseserial=    1,
  22         MousePS2=       2,
  23 };
  24
  25 static QLock mousectlqlock;
  26 static int mousetype;
  27 static int intellimouse;
  28 static int packetsize;
  29 static int resolution;
  30 static int accelerated;
  31 static int mousehwaccel;
  32 static char mouseport[5];
  33
  34 enum
  35 {
  36         CMaccelerated,
  37         CMhwaccel,
  38         CMintellimouse,
  39         CMlinear,
  40         CMps2,
  41         CMps2intellimouse,
  42         CMres,
  43         CMreset,
  44         CMserial,
  45 };
  46
  47 static Cmdtab mousectlmsg[] =
  48 {
  49         CMaccelerated,          "accelerated",          0,
  50         CMhwaccel,              "hwaccel",              2,
  51         CMintellimouse,         "intellimouse",         1,
  52         CMlinear,               "linear",               1,
  53         CMps2,                  "ps2",                  1,
  54         CMps2intellimouse,      "ps2intellimouse",      1,
  55         CMres,                  "res",                  0,
  56         CMreset,                "reset",                1,
  57         CMserial,               "serial",               0,
  58 };
  59
  60 /*
  61  *  ps/2 mouse message is three bytes
  62  *
  63  *      byte 0 -        0 0 SDY SDX 1 M R L
  64  *      byte 1 -        DX
  65  *      byte 2 -        DY
  66  *
  67  *  shift & right button is the same as middle button
  68  *
  69  * Intellimouse and AccuPoint with extra buttons deliver
  70  *      byte 3 -        00 or 01 or FF according to extra button state.
  71  * extra buttons are mapped in this code to buttons 4 and 5.
  72  * AccuPoint generates repeated events for these buttons;
  73 *  it and Intellimouse generate 'down' events only, so
  74  * user-level code is required to generate button 'up' events
  75  * if they are needed by the application.
  76  * Also on laptops with AccuPoint AND external mouse, the
  77  * controller may deliver 3 or 4 bytes according to the type
  78  * of the external mouse; code must adapt.
  79  *
  80  * On the NEC Versa series (and perhaps others?) we seem to
  81  * lose a byte from the packet every once in a while, which
  82  * means we lose where we are in the instruction stream.
  83  * To resynchronize, if we get a byte more than two seconds
  84  * after the previous byte, we assume it's the first in a packet.
  85  */
  86 static void
  87 ps2mouseputc(int c, int shift)
  88 {
  89         static short msg[4];
  90         static int nb;
  91         static uchar b[] = {0, 1, 4, 5, 2, 3, 6, 7, 0, 1, 2, 3, 2, 3, 6, 7 };
  92         static ulong lasttick;
  93         ulong m;
  94         int buttons, dx, dy;
  95
  96         /*
  97          * Resynchronize in stream with timing; see comment above.
  98          */
  99         m = MACHP(0)->ticks;
 100         if(TK2SEC(m - lasttick) > 2)
 101                 nb = 0;
 102         lasttick = m;
 103
 104         /*
 105          *  check byte 0 for consistency
 106          */
 107         if(nb==0 && (c&0xc8)!=0x08){
 108                 if(intellimouse && (c==0x00 || c==0x01 || c==0xFF)){
 109                         /* last byte of 4-byte packet */
 110                         packetsize = 4;
 111                 }
 112                 return;
 113         }
 114
 115         msg[nb] = c;
 116         if(++nb == packetsize){
 117                 nb = 0;
 118                 if(msg[0] & 0x10)
 119                         msg[1] |= 0xFF00;
 120                 if(msg[0] & 0x20)
 121                         msg[2] |= 0xFF00;
 122
 123                 buttons = b[(msg[0]&7) | (shift ? 8 : 0)];
 124                 if(intellimouse && packetsize==4){
 125                         if((msg[3]&0xc8) == 0x08){
 126                                 /* first byte of 3-byte packet */
 127                                 packetsize = 3;
 128                                 msg[0] = msg[3];
 129                                 nb = 1;
 130                                 /* fall through to emit previous packet */
 131                         }else{
 132                                 /* The AccuPoint on the Toshiba 34[48]0CT
 133                                  * encodes extra buttons as 4 and 5. They repeat
 134                                  * and don't release, however, so user-level
 135                                  * timing code is required. Furthermore,
 136                                  * intellimice with 3buttons + scroll give a
 137                                  * two's complement number in the lower 4 bits
 138                                  * (bit 4 is sign extension) that describes
 139                                  * the amount the scroll wheel has moved during
 140                                  * the last sample. Here we use only the sign to
 141                                  * decide whether the wheel is moving up or down
 142                                  * and generate a single button 4 or 5 click
 143                                  * accordingly.
 144                                  */
 145                                 if((msg[3] >> 3) & 1)
 146                                         buttons |= 1<<3;
 147                                 else if(msg[3] & 0x7)
 148                                         buttons |= 1<<4;
 149                         }
 150                 }
 151                 dx = msg[1];
 152                 dy = -msg[2];
 153                 mousetrack(dx, dy, buttons, TK2MS(MACHP(0)->ticks));
 154         }
 155         return;
 156 }
 157
 158 /*
 159  *  set up a ps2 mouse
 160  */
 161 static void
 162 ps2mouse(void)
 163 {
 164         if(mousetype == MousePS2)
 165                 return;
 166
 167         i8042auxenable(ps2mouseputc);
 168         i8042auxcmd(0xEA);      /* set stream mode */
 169
 170         mousetype = MousePS2;
 171         packetsize = 3;
 172         mousehwaccel = 0;
 173 }
 174
 175 /*
 176  * The PS/2 Trackpoint multiplexor on the IBM Thinkpad T23 ignores
 177  * acceleration commands.  It is supposed to pass them on
 178  * to the attached device, but my Logitech mouse is simply
 179  * not behaving any differently.  For such devices, we allow
 180  * the user to use "hwaccel off" to tell us to back off to
 181  * software acceleration even if we're using the PS/2 port.
 182  * (Serial mice are always software accelerated.)
 183  * For more information on the Thinkpad multiplexor, see
 184  * http://wwwcssrv.almaden.ibm.com/trackpoint/
 185  */
 186 static void
 187 setaccelerated(int x)
 188 {
 189         accelerated = x;
 190         if(mousehwaccel){
 191                 switch(mousetype){
 192                 case MousePS2:
 193                         i8042auxcmd(0xE7);
 194                         return;
 195                 }
 196         }
 197         mouseaccelerate(x);
 198 }
 199
 200 static void
 201 setlinear(void)
 202 {
 203         accelerated = 0;
 204         if(mousehwaccel){
 205                 switch(mousetype){
 206                 case MousePS2:
 207                         i8042auxcmd(0xE6);
 208                         return;
 209                 }
 210         }
 211         mouseaccelerate(0);
 212 }
 213
 214 static void
 215 setres(int n)
 216 {
 217         resolution = n;
 218         switch(mousetype){
 219         case MousePS2:
 220                 i8042auxcmd(0xE8);
 221                 i8042auxcmd(n);
 222                 break;
 223         }
 224 }
 225
 226 static void
 227 setintellimouse(void)
 228 {
 229         intellimouse = 1;
 230         packetsize = 4;
 231         switch(mousetype){
 232         case MousePS2:
 233                 i8042auxcmd(0xF3);      /* set sample */
 234                 i8042auxcmd(0xC8);
 235                 i8042auxcmd(0xF3);      /* set sample */
 236                 i8042auxcmd(0x64);
 237                 i8042auxcmd(0xF3);      /* set sample */
 238                 i8042auxcmd(0x50);
 239                 break;
 240         case Mouseserial:
 241                 uartsetmouseputc(mouseport, m5mouseputc);
 242                 break;
 243         }
 244 }
 245
 246 static void
 247 resetmouse(void)
 248 {
 249         packetsize = 3;
 250         switch(mousetype){
 251         case MousePS2:
 252                 i8042auxcmd(0xF6);
 253                 i8042auxcmd(0xEA);      /* streaming */
 254                 i8042auxcmd(0xE8);      /* set resolution */
 255                 i8042auxcmd(3);
 256                 break;
 257         }
 258 }
 259
 260 static void
 261 setstream(int on)
 262 {
 263         switch(mousetype){
 264         case MousePS2:
 265                 i8042auxcmd(on ? 0xF4 : 0xF5);
 266                 break;
 267         }
 268 }
 269
 270 void
 271 mousectl(Cmdbuf *cb)
 272 {
 273         Cmdtab *ct;
 274
 275         qlock(&mousectlqlock);
 276         if(waserror()){
 277                 qunlock(&mousectlqlock);
 278                 nexterror();
 279         }
 280
 281         ct = lookupcmd(cb, mousectlmsg, nelem(mousectlmsg));
 282         switch(ct->index){
 283         case CMaccelerated:
 284                 setstream(0);
 285                 setaccelerated(cb->nf == 1 ? 1 : atoi(cb->f[1]));
 286                 setstream(1);
 287                 break;
 288         case CMintellimouse:
 289                 setstream(0);
 290                 setintellimouse();
 291                 setstream(1);
 292                 break;
 293         case CMlinear:
 294                 setstream(0);
 295                 setlinear();
 296                 setstream(1);
 297                 break;
 298         case CMps2:
 299                 intellimouse = 0;
 300                 ps2mouse();
 301                 setstream(1);
 302                 break;
 303         case CMps2intellimouse:
 304                 ps2mouse();
 305                 setintellimouse();
 306                 setstream(1);
 307                 break;
 308         case CMres:
 309                 setstream(0);
 310                 if(cb->nf >= 2)
 311                         setres(atoi(cb->f[1]));
 312                 else
 313                         setres(1);
 314                 setstream(1);
 315                 break;
 316         case CMreset:
 317                 resetmouse();
 318                 if(accelerated)
 319                         setaccelerated(accelerated);
 320                 if(resolution)
 321                         setres(resolution);
 322                 if(intellimouse)
 323                         setintellimouse();
 324                 setstream(1);
 325                 break;
 326         case CMserial:
 327                 if(mousetype == Mouseserial)
 328                         error(Emouseset);
 329
 330                 if(cb->nf > 2){
 331                         if(strcmp(cb->f[2], "M") == 0)
 332                                 uartmouse(cb->f[1], m3mouseputc, 0);
 333                         else if(strcmp(cb->f[2], "MI") == 0)
 334                                 uartmouse(cb->f[1], m5mouseputc, 0);
 335                         else
 336                                 uartmouse(cb->f[1], mouseputc, cb->nf == 1);
 337                 } else
 338                         uartmouse(cb->f[1], mouseputc, cb->nf == 1);
 339
 340                 mousetype = Mouseserial;
 341                 strncpy(mouseport, cb->f[1], sizeof(mouseport)-1);
 342                 mouseport[sizeof(mouseport)-1] = 0;
 343                 packetsize = 3;
 344                 break;
 345         case CMhwaccel:
 346                 if(strcmp(cb->f[1], "on")==0)
 347                         mousehwaccel = 1;
 348                 else if(strcmp(cb->f[1], "off")==0)
 349                         mousehwaccel = 0;
 350                 else
 351                         cmderror(cb, "bad mouse control message");
 352         }
 353
 354         qunlock(&mousectlqlock);
 355         poperror();
 356 }